Loading...
1
2menu "Bluetooth device drivers"
3 depends on BT
4
5config BT_HCIBTUSB
6 tristate "HCI USB driver"
7 depends on USB
8 help
9 Bluetooth HCI USB driver.
10 This driver is required if you want to use Bluetooth devices with
11 USB interface.
12
13 Say Y here to compile support for Bluetooth USB devices into the
14 kernel or say M to compile it as module (btusb).
15
16config BT_HCIBTSDIO
17 tristate "HCI SDIO driver"
18 depends on MMC
19 help
20 Bluetooth HCI SDIO driver.
21 This driver is required if you want to use Bluetooth device with
22 SDIO interface.
23
24 Say Y here to compile support for Bluetooth SDIO devices into the
25 kernel or say M to compile it as module (btsdio).
26
27config BT_HCIUART
28 tristate "HCI UART driver"
29 help
30 Bluetooth HCI UART driver.
31 This driver is required if you want to use Bluetooth devices with
32 serial port interface. You will also need this driver if you have
33 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
34 adapter and BrainBoxes Bluetooth PC Card.
35
36 Say Y here to compile support for Bluetooth UART devices into the
37 kernel or say M to compile it as module (hci_uart).
38
39config BT_HCIUART_H4
40 bool "UART (H4) protocol support"
41 depends on BT_HCIUART
42 help
43 UART (H4) is serial protocol for communication between Bluetooth
44 device and host. This protocol is required for most Bluetooth devices
45 with UART interface, including PCMCIA and CF cards.
46
47 Say Y here to compile support for HCI UART (H4) protocol.
48
49config BT_HCIUART_BCSP
50 bool "BCSP protocol support"
51 depends on BT_HCIUART
52 select BITREVERSE
53 help
54 BCSP (BlueCore Serial Protocol) is serial protocol for communication
55 between Bluetooth device and host. This protocol is required for non
56 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
57 CF cards.
58
59 Say Y here to compile support for HCI BCSP protocol.
60
61config BT_HCIUART_ATH3K
62 bool "Atheros AR300x serial support"
63 depends on BT_HCIUART
64 help
65 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
66 communication between host and Atheros AR300x Bluetooth devices.
67 This protocol enables AR300x chips to be enabled with
68 power management support.
69 Enable this if you have Atheros AR300x serial Bluetooth device.
70
71 Say Y here to compile support for HCI UART ATH3K protocol.
72
73config BT_HCIUART_LL
74 bool "HCILL protocol support"
75 depends on BT_HCIUART
76 help
77 HCILL (HCI Low Level) is a serial protocol for communication
78 between Bluetooth device and host. This protocol is required for
79 serial Bluetooth devices that are based on Texas Instruments'
80 BRF chips.
81
82 Say Y here to compile support for HCILL protocol.
83
84config BT_HCIBCM203X
85 tristate "HCI BCM203x USB driver"
86 depends on USB
87 select FW_LOADER
88 help
89 Bluetooth HCI BCM203x USB driver.
90 This driver provides the firmware loading mechanism for the Broadcom
91 Blutonium based devices.
92
93 Say Y here to compile support for HCI BCM203x devices into the
94 kernel or say M to compile it as module (bcm203x).
95
96config BT_HCIBPA10X
97 tristate "HCI BPA10x USB driver"
98 depends on USB
99 help
100 Bluetooth HCI BPA10x USB driver.
101 This driver provides support for the Digianswer BPA 100/105 Bluetooth
102 sniffer devices.
103
104 Say Y here to compile support for HCI BPA10x devices into the
105 kernel or say M to compile it as module (bpa10x).
106
107config BT_HCIBFUSB
108 tristate "HCI BlueFRITZ! USB driver"
109 depends on USB
110 select FW_LOADER
111 help
112 Bluetooth HCI BlueFRITZ! USB driver.
113 This driver provides support for Bluetooth USB devices with AVM
114 interface:
115 AVM BlueFRITZ! USB
116
117 Say Y here to compile support for HCI BFUSB devices into the
118 kernel or say M to compile it as module (bfusb).
119
120config BT_HCIDTL1
121 tristate "HCI DTL1 (PC Card) driver"
122 depends on PCMCIA
123 help
124 Bluetooth HCI DTL1 (PC Card) driver.
125 This driver provides support for Bluetooth PCMCIA devices with
126 Nokia DTL1 interface:
127 Nokia Bluetooth Card
128 Socket Bluetooth CF Card
129
130 Say Y here to compile support for HCI DTL1 devices into the
131 kernel or say M to compile it as module (dtl1_cs).
132
133config BT_HCIBT3C
134 tristate "HCI BT3C (PC Card) driver"
135 depends on PCMCIA
136 select FW_LOADER
137 help
138 Bluetooth HCI BT3C (PC Card) driver.
139 This driver provides support for Bluetooth PCMCIA devices with
140 3Com BT3C interface:
141 3Com Bluetooth Card (3CRWB6096)
142 HP Bluetooth Card
143
144 Say Y here to compile support for HCI BT3C devices into the
145 kernel or say M to compile it as module (bt3c_cs).
146
147config BT_HCIBLUECARD
148 tristate "HCI BlueCard (PC Card) driver"
149 depends on PCMCIA
150 help
151 Bluetooth HCI BlueCard (PC Card) driver.
152 This driver provides support for Bluetooth PCMCIA devices with
153 Anycom BlueCard interface:
154 Anycom Bluetooth PC Card
155 Anycom Bluetooth CF Card
156
157 Say Y here to compile support for HCI BlueCard devices into the
158 kernel or say M to compile it as module (bluecard_cs).
159
160config BT_HCIBTUART
161 tristate "HCI UART (PC Card) device driver"
162 depends on PCMCIA
163 help
164 Bluetooth HCI UART (PC Card) driver.
165 This driver provides support for Bluetooth PCMCIA devices with
166 an UART interface:
167 Xircom CreditCard Bluetooth Adapter
168 Xircom RealPort2 Bluetooth Adapter
169 Sphinx PICO Card
170 H-Soft blue+Card
171 Cyber-blue Compact Flash Card
172
173 Say Y here to compile support for HCI UART devices into the
174 kernel or say M to compile it as module (btuart_cs).
175
176config BT_HCIVHCI
177 tristate "HCI VHCI (Virtual HCI device) driver"
178 help
179 Bluetooth Virtual HCI device driver.
180 This driver is required if you want to use HCI Emulation software.
181
182 Say Y here to compile support for virtual HCI devices into the
183 kernel or say M to compile it as module (hci_vhci).
184
185config BT_MRVL
186 tristate "Marvell Bluetooth driver support"
187 help
188 The core driver to support Marvell Bluetooth devices.
189
190 This driver is required if you want to support
191 Marvell Bluetooth devices, such as 8688/8787.
192
193 Say Y here to compile Marvell Bluetooth driver
194 into the kernel or say M to compile it as module.
195
196config BT_MRVL_SDIO
197 tristate "Marvell BT-over-SDIO driver"
198 depends on BT_MRVL && MMC
199 select FW_LOADER
200 help
201 The driver for Marvell Bluetooth chipsets with SDIO interface.
202
203 This driver is required if you want to use Marvell Bluetooth
204 devices with SDIO interface. Currently SD8688/SD8787 chipsets are
205 supported.
206
207 Say Y here to compile support for Marvell BT-over-SDIO driver
208 into the kernel or say M to compile it as module.
209
210config BT_ATH3K
211 tristate "Atheros firmware download driver"
212 depends on BT_HCIBTUSB
213 select FW_LOADER
214 help
215 Bluetooth firmware download driver.
216 This driver loads the firmware into the Atheros Bluetooth
217 chipset.
218
219 Say Y here to compile support for "Atheros firmware download driver"
220 into the kernel or say M to compile it as module (ath3k).
221
222config BT_WILINK
223 tristate "Texas Instruments WiLink7 driver"
224 depends on TI_ST
225 help
226 This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
227 combo devices. This makes use of shared transport line discipline
228 core driver to communicate with the BT core of the combo chip.
229
230 Say Y here to compile support for Texas Instrument's WiLink7 driver
231 into the kernel or say M to compile it as module.
232endmenu
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_MTK
23 tristate
24 select FW_LOADER
25
26config BT_HCIBTUSB
27 tristate "HCI USB driver"
28 depends on USB
29 select BT_INTEL
30 help
31 Bluetooth HCI USB driver.
32 This driver is required if you want to use Bluetooth devices with
33 USB interface.
34
35 Say Y here to compile support for Bluetooth USB devices into the
36 kernel or say M to compile it as module (btusb).
37
38config BT_HCIBTUSB_AUTOSUSPEND
39 bool "Enable USB autosuspend for Bluetooth USB devices by default"
40 depends on BT_HCIBTUSB
41 help
42 Say Y here to enable USB autosuspend for Bluetooth USB devices by
43 default.
44
45 This can be overridden by passing btusb.enable_autosuspend=[y|n]
46 on the kernel commandline.
47
48config BT_HCIBTUSB_POLL_SYNC
49 bool "Enable USB poll_sync for Bluetooth USB devices by default"
50 depends on BT_HCIBTUSB
51 default y
52 help
53 poll_sync synchronizes the USB data and event endpoints by
54 prioritizing the later.
55
56 Say Y here to enable USB poll_sync for Bluetooth USB devices by
57 default.
58
59config BT_HCIBTUSB_BCM
60 bool "Broadcom protocol support"
61 depends on BT_HCIBTUSB
62 select BT_BCM
63 default y
64 help
65 The Broadcom protocol support enables firmware and patchram
66 download support for Broadcom Bluetooth controllers.
67
68 Say Y here to compile support for Broadcom protocol.
69
70config BT_HCIBTUSB_MTK
71 bool "MediaTek protocol support"
72 depends on BT_HCIBTUSB
73 select BT_MTK
74 default n
75 help
76 The MediaTek protocol support enables firmware download
77 support and chip initialization for MediaTek Bluetooth
78 USB controllers.
79
80 Say Y here to compile support for MediaTek protocol.
81
82config BT_HCIBTUSB_RTL
83 bool "Realtek protocol support"
84 depends on BT_HCIBTUSB
85 select BT_RTL
86 default y
87 help
88 The Realtek protocol support enables firmware and configuration
89 download support for Realtek Bluetooth controllers.
90
91 Say Y here to compile support for Realtek protocol.
92
93config BT_HCIBTSDIO
94 tristate "HCI SDIO driver"
95 depends on MMC
96 help
97 Bluetooth HCI SDIO driver.
98 This driver is required if you want to use Bluetooth device with
99 SDIO interface.
100
101 Say Y here to compile support for Bluetooth SDIO devices into the
102 kernel or say M to compile it as module (btsdio).
103
104config BT_HCIUART
105 tristate "HCI UART driver"
106 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
107 depends on NVMEM || !NVMEM
108 depends on TTY
109 help
110 Bluetooth HCI UART driver.
111 This driver is required if you want to use Bluetooth devices with
112 serial port interface. You will also need this driver if you have
113 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
114 adapter and BrainBoxes Bluetooth PC Card.
115
116 Say Y here to compile support for Bluetooth UART devices into the
117 kernel or say M to compile it as module (hci_uart).
118
119config BT_HCIUART_SERDEV
120 bool
121 depends on SERIAL_DEV_BUS && BT_HCIUART
122 default y
123
124config BT_HCIUART_H4
125 bool "UART (H4) protocol support"
126 depends on BT_HCIUART
127 help
128 UART (H4) is serial protocol for communication between Bluetooth
129 device and host. This protocol is required for most Bluetooth devices
130 with UART interface, including PCMCIA and CF cards.
131
132 Say Y here to compile support for HCI UART (H4) protocol.
133
134config BT_HCIUART_NOKIA
135 tristate "UART Nokia H4+ protocol support"
136 depends on BT_HCIUART
137 depends on BT_HCIUART_SERDEV
138 depends on GPIOLIB
139 depends on PM
140 select BT_HCIUART_H4
141 select BT_BCM
142 help
143 Nokia H4+ is serial protocol for communication between Bluetooth
144 device and host. This protocol is required for Bluetooth devices
145 with UART interface in Nokia devices.
146
147 Say Y here to compile support for Nokia's H4+ protocol.
148
149config BT_HCIUART_BCSP
150 bool "BCSP protocol support"
151 depends on BT_HCIUART
152 select BITREVERSE
153 help
154 BCSP (BlueCore Serial Protocol) is serial protocol for communication
155 between Bluetooth device and host. This protocol is required for non
156 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
157 CF cards.
158
159 Say Y here to compile support for HCI BCSP protocol.
160
161config BT_HCIUART_ATH3K
162 bool "Atheros AR300x serial support"
163 depends on BT_HCIUART
164 select BT_HCIUART_H4
165 help
166 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
167 communication between host and Atheros AR300x Bluetooth devices.
168 This protocol enables AR300x chips to be enabled with
169 power management support.
170 Enable this if you have Atheros AR300x serial Bluetooth device.
171
172 Say Y here to compile support for HCI UART ATH3K protocol.
173
174config BT_HCIUART_LL
175 bool "HCILL protocol support"
176 depends on BT_HCIUART_SERDEV
177 select BT_HCIUART_H4
178 help
179 HCILL (HCI Low Level) is a serial protocol for communication
180 between Bluetooth device and host. This protocol is required for
181 serial Bluetooth devices that are based on Texas Instruments'
182 BRF chips.
183
184 Say Y here to compile support for HCILL protocol.
185
186config BT_HCIUART_3WIRE
187 bool "Three-wire UART (H5) protocol support"
188 depends on BT_HCIUART
189 depends on BT_HCIUART_SERDEV
190 help
191 The HCI Three-wire UART Transport Layer makes it possible to
192 user the Bluetooth HCI over a serial port interface. The HCI
193 Three-wire UART Transport Layer assumes that the UART
194 communication may have bit errors, overrun errors or burst
195 errors and thereby making CTS/RTS lines unnecessary.
196
197 Say Y here to compile support for Three-wire UART protocol.
198
199config BT_HCIUART_INTEL
200 bool "Intel protocol support"
201 depends on BT_HCIUART
202 depends on GPIOLIB
203 select BT_HCIUART_H4
204 select BT_INTEL
205 help
206 The Intel protocol support enables Bluetooth HCI over serial
207 port interface for Intel Bluetooth controllers.
208
209 Say Y here to compile support for Intel protocol.
210
211config BT_HCIUART_BCM
212 bool "Broadcom protocol support"
213 depends on BT_HCIUART
214 depends on BT_HCIUART_SERDEV
215 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
216 depends on GPIOLIB
217 select BT_HCIUART_H4
218 select BT_BCM
219 help
220 The Broadcom protocol support enables Bluetooth HCI over serial
221 port interface for Broadcom Bluetooth controllers.
222
223 Say Y here to compile support for Broadcom protocol.
224
225config BT_HCIUART_RTL
226 bool "Realtek protocol support"
227 depends on BT_HCIUART
228 depends on BT_HCIUART_SERDEV
229 depends on GPIOLIB
230 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
231 select BT_HCIUART_3WIRE
232 select BT_RTL
233 help
234 The Realtek protocol support enables Bluetooth HCI over 3-Wire
235 serial port interface for Realtek Bluetooth controllers.
236
237 Say Y here to compile support for Realtek protocol.
238
239config BT_HCIUART_QCA
240 bool "Qualcomm Atheros protocol support"
241 depends on BT_HCIUART
242 depends on BT_HCIUART_SERDEV
243 select BT_HCIUART_H4
244 select BT_QCA
245 help
246 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
247 over serial port interface(H4) between controller and host.
248 This protocol is required for UART clock control for QCA Bluetooth
249 devices.
250
251 Say Y here to compile support for QCA protocol.
252
253config BT_HCIUART_AG6XX
254 bool "Intel AG6XX protocol support"
255 depends on BT_HCIUART
256 select BT_HCIUART_H4
257 select BT_INTEL
258 help
259 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
260 port interface for Intel ibt 2.1 Bluetooth controllers.
261
262 Say Y here to compile support for Intel AG6XX protocol.
263
264config BT_HCIUART_MRVL
265 bool "Marvell protocol support"
266 depends on BT_HCIUART
267 depends on BT_HCIUART_SERDEV
268 select BT_HCIUART_H4
269 help
270 Marvell is serial protocol for communication between Bluetooth
271 device and host. This protocol is required for most Marvell Bluetooth
272 devices with UART interface.
273
274 Say Y here to compile support for HCI MRVL protocol.
275
276config BT_HCIBCM203X
277 tristate "HCI BCM203x USB driver"
278 depends on USB
279 select FW_LOADER
280 help
281 Bluetooth HCI BCM203x USB driver.
282 This driver provides the firmware loading mechanism for the Broadcom
283 Blutonium based devices.
284
285 Say Y here to compile support for HCI BCM203x devices into the
286 kernel or say M to compile it as module (bcm203x).
287
288
289config BT_HCIBCM4377
290 tristate "HCI BCM4377/4378/4387 PCIe driver"
291 depends on PCI
292 select FW_LOADER
293 help
294 Support for Broadcom BCM4377/4378/4387 Bluetooth chipsets attached via
295 PCIe. These are usually found in Apple machines.
296
297 Say Y here to compile support for HCI BCM4377 family devices into the
298 kernel or say M to compile it as module (hci_bcm4377).
299
300config BT_HCIBPA10X
301 tristate "HCI BPA10x USB driver"
302 depends on USB
303 help
304 Bluetooth HCI BPA10x USB driver.
305 This driver provides support for the Digianswer BPA 100/105 Bluetooth
306 sniffer devices.
307
308 Say Y here to compile support for HCI BPA10x devices into the
309 kernel or say M to compile it as module (bpa10x).
310
311config BT_HCIBFUSB
312 tristate "HCI BlueFRITZ! USB driver"
313 depends on USB
314 select FW_LOADER
315 help
316 Bluetooth HCI BlueFRITZ! USB driver.
317 This driver provides support for Bluetooth USB devices with AVM
318 interface:
319 AVM BlueFRITZ! USB
320
321 Say Y here to compile support for HCI BFUSB devices into the
322 kernel or say M to compile it as module (bfusb).
323
324config BT_HCIDTL1
325 tristate "HCI DTL1 (PC Card) driver"
326 depends on PCMCIA
327 help
328 Bluetooth HCI DTL1 (PC Card) driver.
329 This driver provides support for Bluetooth PCMCIA devices with
330 Nokia DTL1 interface:
331 Nokia Bluetooth Card
332 Socket Bluetooth CF Card
333
334 Say Y here to compile support for HCI DTL1 devices into the
335 kernel or say M to compile it as module (dtl1_cs).
336
337config BT_HCIBT3C
338 tristate "HCI BT3C (PC Card) driver"
339 depends on PCMCIA
340 select FW_LOADER
341 help
342 Bluetooth HCI BT3C (PC Card) driver.
343 This driver provides support for Bluetooth PCMCIA devices with
344 3Com BT3C interface:
345 3Com Bluetooth Card (3CRWB6096)
346 HP Bluetooth Card
347
348 Say Y here to compile support for HCI BT3C devices into the
349 kernel or say M to compile it as module (bt3c_cs).
350
351config BT_HCIBLUECARD
352 tristate "HCI BlueCard (PC Card) driver"
353 depends on PCMCIA
354 help
355 Bluetooth HCI BlueCard (PC Card) driver.
356 This driver provides support for Bluetooth PCMCIA devices with
357 Anycom BlueCard interface:
358 Anycom Bluetooth PC Card
359 Anycom Bluetooth CF Card
360
361 Say Y here to compile support for HCI BlueCard devices into the
362 kernel or say M to compile it as module (bluecard_cs).
363
364config BT_HCIVHCI
365 tristate "HCI VHCI (Virtual HCI device) driver"
366 help
367 Bluetooth Virtual HCI device driver.
368 This driver is required if you want to use HCI Emulation software.
369
370 Say Y here to compile support for virtual HCI devices into the
371 kernel or say M to compile it as module (hci_vhci).
372
373config BT_MRVL
374 tristate "Marvell Bluetooth driver support"
375 help
376 The core driver to support Marvell Bluetooth devices.
377
378 This driver is required if you want to support
379 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
380
381 Say Y here to compile Marvell Bluetooth driver
382 into the kernel or say M to compile it as module.
383
384config BT_MRVL_SDIO
385 tristate "Marvell BT-over-SDIO driver"
386 depends on BT_MRVL && MMC
387 select FW_LOADER
388 select WANT_DEV_COREDUMP
389 help
390 The driver for Marvell Bluetooth chipsets with SDIO interface.
391
392 This driver is required if you want to use Marvell Bluetooth
393 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
394 chipsets are supported.
395
396 Say Y here to compile support for Marvell BT-over-SDIO driver
397 into the kernel or say M to compile it as module.
398
399config BT_ATH3K
400 tristate "Atheros firmware download driver"
401 depends on BT_HCIBTUSB
402 select FW_LOADER
403 help
404 Bluetooth firmware download driver.
405 This driver loads the firmware into the Atheros Bluetooth
406 chipset.
407
408 Say Y here to compile support for "Atheros firmware download driver"
409 into the kernel or say M to compile it as module (ath3k).
410
411config BT_MTKSDIO
412 tristate "MediaTek HCI SDIO driver"
413 depends on MMC
414 select BT_MTK
415 help
416 MediaTek Bluetooth HCI SDIO driver.
417 This driver is required if you want to use MediaTek Bluetooth
418 with SDIO interface.
419
420 Say Y here to compile support for MediaTek Bluetooth SDIO devices
421 into the kernel or say M to compile it as module (btmtksdio).
422
423config BT_MTKUART
424 tristate "MediaTek HCI UART driver"
425 depends on SERIAL_DEV_BUS
426 select BT_MTK
427 help
428 MediaTek Bluetooth HCI UART driver.
429 This driver is required if you want to use MediaTek Bluetooth
430 with serial interface.
431
432 Say Y here to compile support for MediaTek Bluetooth UART devices
433 into the kernel or say M to compile it as module (btmtkuart).
434
435config BT_QCOMSMD
436 tristate "Qualcomm SMD based HCI support"
437 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
438 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
439 select BT_QCA
440 help
441 Qualcomm SMD based HCI driver.
442 This driver is used to bridge HCI data onto the shared memory
443 channels to the WCNSS core.
444
445 Say Y here to compile support for HCI over Qualcomm SMD into the
446 kernel or say M to compile as a module.
447
448config BT_HCIRSI
449 tristate
450 help
451 Redpine BT driver.
452 This driver handles BT traffic from upper layers and pass
453 to the RSI_91x coex module for further scheduling to device
454
455 Say Y here to compile support for HCI over Redpine into the
456 kernel or say M to compile as a module.
457
458config BT_VIRTIO
459 tristate "Virtio Bluetooth driver"
460 depends on VIRTIO
461 help
462 Virtio Bluetooth support driver.
463 This driver supports Virtio Bluetooth devices.
464
465 Say Y here to compile support for HCI over Virtio into the
466 kernel or say M to compile as a module.
467
468endmenu