Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*******************************************************************************
3 * Filename: target_core_xcopy.c
4 *
5 * This file contains support for SPC-4 Extended-Copy offload with generic
6 * TCM backends.
7 *
8 * Copyright (c) 2011-2013 Datera, Inc. All rights reserved.
9 *
10 * Author:
11 * Nicholas A. Bellinger <nab@daterainc.com>
12 *
13 ******************************************************************************/
14
15#include <linux/slab.h>
16#include <linux/spinlock.h>
17#include <linux/list.h>
18#include <linux/configfs.h>
19#include <linux/ratelimit.h>
20#include <scsi/scsi_proto.h>
21#include <asm/unaligned.h>
22
23#include <target/target_core_base.h>
24#include <target/target_core_backend.h>
25#include <target/target_core_fabric.h>
26
27#include "target_core_internal.h"
28#include "target_core_pr.h"
29#include "target_core_ua.h"
30#include "target_core_xcopy.h"
31
32static struct workqueue_struct *xcopy_wq = NULL;
33
34static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop);
35
36/**
37 * target_xcopy_locate_se_dev_e4_iter - compare XCOPY NAA device identifiers
38 *
39 * @se_dev: device being considered for match
40 * @dev_wwn: XCOPY requested NAA dev_wwn
41 * @return: 1 on match, 0 on no-match
42 */
43static int target_xcopy_locate_se_dev_e4_iter(struct se_device *se_dev,
44 const unsigned char *dev_wwn)
45{
46 unsigned char tmp_dev_wwn[XCOPY_NAA_IEEE_REGEX_LEN];
47 int rc;
48
49 if (!se_dev->dev_attrib.emulate_3pc) {
50 pr_debug("XCOPY: emulate_3pc disabled on se_dev %p\n", se_dev);
51 return 0;
52 }
53
54 memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
55 spc_gen_naa_6h_vendor_specific(se_dev, &tmp_dev_wwn[0]);
56
57 rc = memcmp(&tmp_dev_wwn[0], dev_wwn, XCOPY_NAA_IEEE_REGEX_LEN);
58 if (rc != 0) {
59 pr_debug("XCOPY: skip non-matching: %*ph\n",
60 XCOPY_NAA_IEEE_REGEX_LEN, tmp_dev_wwn);
61 return 0;
62 }
63 pr_debug("XCOPY 0xe4: located se_dev: %p\n", se_dev);
64
65 return 1;
66}
67
68static int target_xcopy_locate_se_dev_e4(struct se_session *sess,
69 const unsigned char *dev_wwn,
70 struct se_device **_found_dev,
71 struct percpu_ref **_found_lun_ref)
72{
73 struct se_dev_entry *deve;
74 struct se_node_acl *nacl;
75 struct se_lun *this_lun = NULL;
76 struct se_device *found_dev = NULL;
77
78 /* cmd with NULL sess indicates no associated $FABRIC_MOD */
79 if (!sess)
80 goto err_out;
81
82 pr_debug("XCOPY 0xe4: searching for: %*ph\n",
83 XCOPY_NAA_IEEE_REGEX_LEN, dev_wwn);
84
85 nacl = sess->se_node_acl;
86 rcu_read_lock();
87 hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) {
88 struct se_device *this_dev;
89 int rc;
90
91 this_lun = deve->se_lun;
92 this_dev = rcu_dereference_raw(this_lun->lun_se_dev);
93
94 rc = target_xcopy_locate_se_dev_e4_iter(this_dev, dev_wwn);
95 if (rc) {
96 if (percpu_ref_tryget_live(&this_lun->lun_ref))
97 found_dev = this_dev;
98 break;
99 }
100 }
101 rcu_read_unlock();
102 if (found_dev == NULL)
103 goto err_out;
104
105 pr_debug("lun_ref held for se_dev: %p se_dev->se_dev_group: %p\n",
106 found_dev, &found_dev->dev_group);
107 *_found_dev = found_dev;
108 *_found_lun_ref = &this_lun->lun_ref;
109 return 0;
110err_out:
111 pr_debug_ratelimited("Unable to locate 0xe4 descriptor for EXTENDED_COPY\n");
112 return -EINVAL;
113}
114
115static int target_xcopy_parse_tiddesc_e4(struct se_cmd *se_cmd, struct xcopy_op *xop,
116 unsigned char *p, unsigned short cscd_index)
117{
118 unsigned char *desc = p;
119 unsigned short ript;
120 u8 desig_len;
121 /*
122 * Extract RELATIVE INITIATOR PORT IDENTIFIER
123 */
124 ript = get_unaligned_be16(&desc[2]);
125 pr_debug("XCOPY 0xe4: RELATIVE INITIATOR PORT IDENTIFIER: %hu\n", ript);
126 /*
127 * Check for supported code set, association, and designator type
128 */
129 if ((desc[4] & 0x0f) != 0x1) {
130 pr_err("XCOPY 0xe4: code set of non binary type not supported\n");
131 return -EINVAL;
132 }
133 if ((desc[5] & 0x30) != 0x00) {
134 pr_err("XCOPY 0xe4: association other than LUN not supported\n");
135 return -EINVAL;
136 }
137 if ((desc[5] & 0x0f) != 0x3) {
138 pr_err("XCOPY 0xe4: designator type unsupported: 0x%02x\n",
139 (desc[5] & 0x0f));
140 return -EINVAL;
141 }
142 /*
143 * Check for matching 16 byte length for NAA IEEE Registered Extended
144 * Assigned designator
145 */
146 desig_len = desc[7];
147 if (desig_len != XCOPY_NAA_IEEE_REGEX_LEN) {
148 pr_err("XCOPY 0xe4: invalid desig_len: %d\n", (int)desig_len);
149 return -EINVAL;
150 }
151 pr_debug("XCOPY 0xe4: desig_len: %d\n", (int)desig_len);
152 /*
153 * Check for NAA IEEE Registered Extended Assigned header..
154 */
155 if ((desc[8] & 0xf0) != 0x60) {
156 pr_err("XCOPY 0xe4: Unsupported DESIGNATOR TYPE: 0x%02x\n",
157 (desc[8] & 0xf0));
158 return -EINVAL;
159 }
160
161 if (cscd_index != xop->stdi && cscd_index != xop->dtdi) {
162 pr_debug("XCOPY 0xe4: ignoring CSCD entry %d - neither src nor "
163 "dest\n", cscd_index);
164 return 0;
165 }
166
167 if (cscd_index == xop->stdi) {
168 memcpy(&xop->src_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN);
169 /*
170 * Determine if the source designator matches the local device
171 */
172 if (!memcmp(&xop->local_dev_wwn[0], &xop->src_tid_wwn[0],
173 XCOPY_NAA_IEEE_REGEX_LEN)) {
174 xop->op_origin = XCOL_SOURCE_RECV_OP;
175 xop->src_dev = se_cmd->se_dev;
176 pr_debug("XCOPY 0xe4: Set xop->src_dev %p from source"
177 " received xop\n", xop->src_dev);
178 }
179 }
180
181 if (cscd_index == xop->dtdi) {
182 memcpy(&xop->dst_tid_wwn[0], &desc[8], XCOPY_NAA_IEEE_REGEX_LEN);
183 /*
184 * Determine if the destination designator matches the local
185 * device. If @cscd_index corresponds to both source (stdi) and
186 * destination (dtdi), or dtdi comes after stdi, then
187 * XCOL_DEST_RECV_OP wins.
188 */
189 if (!memcmp(&xop->local_dev_wwn[0], &xop->dst_tid_wwn[0],
190 XCOPY_NAA_IEEE_REGEX_LEN)) {
191 xop->op_origin = XCOL_DEST_RECV_OP;
192 xop->dst_dev = se_cmd->se_dev;
193 pr_debug("XCOPY 0xe4: Set xop->dst_dev: %p from destination"
194 " received xop\n", xop->dst_dev);
195 }
196 }
197
198 return 0;
199}
200
201static int target_xcopy_parse_target_descriptors(struct se_cmd *se_cmd,
202 struct xcopy_op *xop, unsigned char *p,
203 unsigned short tdll, sense_reason_t *sense_ret)
204{
205 struct se_device *local_dev = se_cmd->se_dev;
206 unsigned char *desc = p;
207 int offset = tdll % XCOPY_TARGET_DESC_LEN, rc;
208 unsigned short cscd_index = 0;
209 unsigned short start = 0;
210
211 *sense_ret = TCM_INVALID_PARAMETER_LIST;
212
213 if (offset != 0) {
214 pr_err("XCOPY target descriptor list length is not"
215 " multiple of %d\n", XCOPY_TARGET_DESC_LEN);
216 *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE;
217 return -EINVAL;
218 }
219 if (tdll > RCR_OP_MAX_TARGET_DESC_COUNT * XCOPY_TARGET_DESC_LEN) {
220 pr_err("XCOPY target descriptor supports a maximum"
221 " two src/dest descriptors, tdll: %hu too large..\n", tdll);
222 /* spc4r37 6.4.3.4 CSCD DESCRIPTOR LIST LENGTH field */
223 *sense_ret = TCM_TOO_MANY_TARGET_DESCS;
224 return -EINVAL;
225 }
226 /*
227 * Generate an IEEE Registered Extended designator based upon the
228 * se_device the XCOPY was received upon..
229 */
230 memset(&xop->local_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
231 spc_gen_naa_6h_vendor_specific(local_dev, &xop->local_dev_wwn[0]);
232
233 while (start < tdll) {
234 /*
235 * Check target descriptor identification with 0xE4 type, and
236 * compare the current index with the CSCD descriptor IDs in
237 * the segment descriptor. Use VPD 0x83 WWPN matching ..
238 */
239 switch (desc[0]) {
240 case 0xe4:
241 rc = target_xcopy_parse_tiddesc_e4(se_cmd, xop,
242 &desc[0], cscd_index);
243 if (rc != 0)
244 goto out;
245 start += XCOPY_TARGET_DESC_LEN;
246 desc += XCOPY_TARGET_DESC_LEN;
247 cscd_index++;
248 break;
249 default:
250 pr_err("XCOPY unsupported descriptor type code:"
251 " 0x%02x\n", desc[0]);
252 *sense_ret = TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE;
253 goto out;
254 }
255 }
256
257 switch (xop->op_origin) {
258 case XCOL_SOURCE_RECV_OP:
259 rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess,
260 xop->dst_tid_wwn,
261 &xop->dst_dev,
262 &xop->remote_lun_ref);
263 break;
264 case XCOL_DEST_RECV_OP:
265 rc = target_xcopy_locate_se_dev_e4(se_cmd->se_sess,
266 xop->src_tid_wwn,
267 &xop->src_dev,
268 &xop->remote_lun_ref);
269 break;
270 default:
271 pr_err("XCOPY CSCD descriptor IDs not found in CSCD list - "
272 "stdi: %hu dtdi: %hu\n", xop->stdi, xop->dtdi);
273 rc = -EINVAL;
274 break;
275 }
276 /*
277 * If a matching IEEE NAA 0x83 descriptor for the requested device
278 * is not located on this node, return COPY_ABORTED with ASQ/ASQC
279 * 0x0d/0x02 - COPY_TARGET_DEVICE_NOT_REACHABLE to request the
280 * initiator to fall back to normal copy method.
281 */
282 if (rc < 0) {
283 *sense_ret = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE;
284 goto out;
285 }
286
287 pr_debug("XCOPY TGT desc: Source dev: %p NAA IEEE WWN: 0x%16phN\n",
288 xop->src_dev, &xop->src_tid_wwn[0]);
289 pr_debug("XCOPY TGT desc: Dest dev: %p NAA IEEE WWN: 0x%16phN\n",
290 xop->dst_dev, &xop->dst_tid_wwn[0]);
291
292 return cscd_index;
293
294out:
295 return -EINVAL;
296}
297
298static int target_xcopy_parse_segdesc_02(struct xcopy_op *xop, unsigned char *p)
299{
300 unsigned char *desc = p;
301 int dc = (desc[1] & 0x02);
302 unsigned short desc_len;
303
304 desc_len = get_unaligned_be16(&desc[2]);
305 if (desc_len != 0x18) {
306 pr_err("XCOPY segment desc 0x02: Illegal desc_len:"
307 " %hu\n", desc_len);
308 return -EINVAL;
309 }
310
311 xop->stdi = get_unaligned_be16(&desc[4]);
312 xop->dtdi = get_unaligned_be16(&desc[6]);
313
314 if (xop->stdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX ||
315 xop->dtdi > XCOPY_CSCD_DESC_ID_LIST_OFF_MAX) {
316 pr_err("XCOPY segment desc 0x02: unsupported CSCD ID > 0x%x; stdi: %hu dtdi: %hu\n",
317 XCOPY_CSCD_DESC_ID_LIST_OFF_MAX, xop->stdi, xop->dtdi);
318 return -EINVAL;
319 }
320
321 pr_debug("XCOPY seg desc 0x02: desc_len: %hu stdi: %hu dtdi: %hu, DC: %d\n",
322 desc_len, xop->stdi, xop->dtdi, dc);
323
324 xop->nolb = get_unaligned_be16(&desc[10]);
325 xop->src_lba = get_unaligned_be64(&desc[12]);
326 xop->dst_lba = get_unaligned_be64(&desc[20]);
327 pr_debug("XCOPY seg desc 0x02: nolb: %hu src_lba: %llu dst_lba: %llu\n",
328 xop->nolb, (unsigned long long)xop->src_lba,
329 (unsigned long long)xop->dst_lba);
330
331 return 0;
332}
333
334static int target_xcopy_parse_segment_descriptors(struct xcopy_op *xop,
335 unsigned char *p, unsigned int sdll,
336 sense_reason_t *sense_ret)
337{
338 unsigned char *desc = p;
339 unsigned int start = 0;
340 int offset = sdll % XCOPY_SEGMENT_DESC_LEN, rc, ret = 0;
341
342 *sense_ret = TCM_INVALID_PARAMETER_LIST;
343
344 if (offset != 0) {
345 pr_err("XCOPY segment descriptor list length is not"
346 " multiple of %d\n", XCOPY_SEGMENT_DESC_LEN);
347 *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE;
348 return -EINVAL;
349 }
350 if (sdll > RCR_OP_MAX_SG_DESC_COUNT * XCOPY_SEGMENT_DESC_LEN) {
351 pr_err("XCOPY supports %u segment descriptor(s), sdll: %u too"
352 " large..\n", RCR_OP_MAX_SG_DESC_COUNT, sdll);
353 /* spc4r37 6.4.3.5 SEGMENT DESCRIPTOR LIST LENGTH field */
354 *sense_ret = TCM_TOO_MANY_SEGMENT_DESCS;
355 return -EINVAL;
356 }
357
358 while (start < sdll) {
359 /*
360 * Check segment descriptor type code for block -> block
361 */
362 switch (desc[0]) {
363 case 0x02:
364 rc = target_xcopy_parse_segdesc_02(xop, desc);
365 if (rc < 0)
366 goto out;
367
368 ret++;
369 start += XCOPY_SEGMENT_DESC_LEN;
370 desc += XCOPY_SEGMENT_DESC_LEN;
371 break;
372 default:
373 pr_err("XCOPY unsupported segment descriptor"
374 "type: 0x%02x\n", desc[0]);
375 *sense_ret = TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE;
376 goto out;
377 }
378 }
379
380 return ret;
381
382out:
383 return -EINVAL;
384}
385
386/*
387 * Start xcopy_pt ops
388 */
389
390struct xcopy_pt_cmd {
391 struct se_cmd se_cmd;
392 struct completion xpt_passthrough_sem;
393 unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER];
394};
395
396struct se_portal_group xcopy_pt_tpg;
397static struct se_session xcopy_pt_sess;
398static struct se_node_acl xcopy_pt_nacl;
399
400static int xcopy_pt_get_cmd_state(struct se_cmd *se_cmd)
401{
402 return 0;
403}
404
405static void xcopy_pt_undepend_remotedev(struct xcopy_op *xop)
406{
407 if (xop->op_origin == XCOL_SOURCE_RECV_OP)
408 pr_debug("putting dst lun_ref for %p\n", xop->dst_dev);
409 else
410 pr_debug("putting src lun_ref for %p\n", xop->src_dev);
411
412 percpu_ref_put(xop->remote_lun_ref);
413}
414
415static void xcopy_pt_release_cmd(struct se_cmd *se_cmd)
416{
417 struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
418 struct xcopy_pt_cmd, se_cmd);
419
420 /* xpt_cmd is on the stack, nothing to free here */
421 pr_debug("xpt_cmd done: %p\n", xpt_cmd);
422}
423
424static int xcopy_pt_check_stop_free(struct se_cmd *se_cmd)
425{
426 struct xcopy_pt_cmd *xpt_cmd = container_of(se_cmd,
427 struct xcopy_pt_cmd, se_cmd);
428
429 complete(&xpt_cmd->xpt_passthrough_sem);
430 return 0;
431}
432
433static int xcopy_pt_write_pending(struct se_cmd *se_cmd)
434{
435 return 0;
436}
437
438static int xcopy_pt_queue_data_in(struct se_cmd *se_cmd)
439{
440 return 0;
441}
442
443static int xcopy_pt_queue_status(struct se_cmd *se_cmd)
444{
445 return 0;
446}
447
448static const struct target_core_fabric_ops xcopy_pt_tfo = {
449 .fabric_name = "xcopy-pt",
450 .get_cmd_state = xcopy_pt_get_cmd_state,
451 .release_cmd = xcopy_pt_release_cmd,
452 .check_stop_free = xcopy_pt_check_stop_free,
453 .write_pending = xcopy_pt_write_pending,
454 .queue_data_in = xcopy_pt_queue_data_in,
455 .queue_status = xcopy_pt_queue_status,
456};
457
458/*
459 * End xcopy_pt_ops
460 */
461
462int target_xcopy_setup_pt(void)
463{
464 int ret;
465
466 xcopy_wq = alloc_workqueue("xcopy_wq", WQ_MEM_RECLAIM, 0);
467 if (!xcopy_wq) {
468 pr_err("Unable to allocate xcopy_wq\n");
469 return -ENOMEM;
470 }
471
472 memset(&xcopy_pt_tpg, 0, sizeof(struct se_portal_group));
473 INIT_LIST_HEAD(&xcopy_pt_tpg.acl_node_list);
474 INIT_LIST_HEAD(&xcopy_pt_tpg.tpg_sess_list);
475
476 xcopy_pt_tpg.se_tpg_tfo = &xcopy_pt_tfo;
477
478 memset(&xcopy_pt_nacl, 0, sizeof(struct se_node_acl));
479 INIT_LIST_HEAD(&xcopy_pt_nacl.acl_list);
480 INIT_LIST_HEAD(&xcopy_pt_nacl.acl_sess_list);
481 memset(&xcopy_pt_sess, 0, sizeof(struct se_session));
482 ret = transport_init_session(&xcopy_pt_sess);
483 if (ret < 0)
484 goto destroy_wq;
485
486 xcopy_pt_nacl.se_tpg = &xcopy_pt_tpg;
487 xcopy_pt_nacl.nacl_sess = &xcopy_pt_sess;
488
489 xcopy_pt_sess.se_tpg = &xcopy_pt_tpg;
490 xcopy_pt_sess.se_node_acl = &xcopy_pt_nacl;
491
492 return 0;
493
494destroy_wq:
495 destroy_workqueue(xcopy_wq);
496 xcopy_wq = NULL;
497 return ret;
498}
499
500void target_xcopy_release_pt(void)
501{
502 if (xcopy_wq) {
503 destroy_workqueue(xcopy_wq);
504 transport_uninit_session(&xcopy_pt_sess);
505 }
506}
507
508/*
509 * target_xcopy_setup_pt_cmd - set up a pass-through command
510 * @xpt_cmd: Data structure to initialize.
511 * @xop: Describes the XCOPY operation received from an initiator.
512 * @se_dev: Backend device to associate with @xpt_cmd if
513 * @remote_port == true.
514 * @cdb: SCSI CDB to be copied into @xpt_cmd.
515 * @remote_port: If false, use the LUN through which the XCOPY command has
516 * been received. If true, use @se_dev->xcopy_lun.
517 *
518 * Set up a SCSI command (READ or WRITE) that will be used to execute an
519 * XCOPY command.
520 */
521static int target_xcopy_setup_pt_cmd(
522 struct xcopy_pt_cmd *xpt_cmd,
523 struct xcopy_op *xop,
524 struct se_device *se_dev,
525 unsigned char *cdb,
526 bool remote_port)
527{
528 struct se_cmd *cmd = &xpt_cmd->se_cmd;
529
530 /*
531 * Setup LUN+port to honor reservations based upon xop->op_origin for
532 * X-COPY PUSH or X-COPY PULL based upon where the CDB was received.
533 */
534 if (remote_port) {
535 cmd->se_lun = &se_dev->xcopy_lun;
536 cmd->se_dev = se_dev;
537 } else {
538 cmd->se_lun = xop->xop_se_cmd->se_lun;
539 cmd->se_dev = xop->xop_se_cmd->se_dev;
540 }
541 cmd->se_cmd_flags |= SCF_SE_LUN_CMD;
542
543 if (target_cmd_init_cdb(cmd, cdb, GFP_KERNEL))
544 return -EINVAL;
545
546 cmd->tag = 0;
547 if (target_cmd_parse_cdb(cmd))
548 return -EINVAL;
549
550 if (transport_generic_map_mem_to_cmd(cmd, xop->xop_data_sg,
551 xop->xop_data_nents, NULL, 0))
552 return -EINVAL;
553
554 pr_debug("Setup PASSTHROUGH_NOALLOC t_data_sg: %p t_data_nents:"
555 " %u\n", cmd->t_data_sg, cmd->t_data_nents);
556
557 return 0;
558}
559
560static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd)
561{
562 struct se_cmd *se_cmd = &xpt_cmd->se_cmd;
563 sense_reason_t sense_rc;
564
565 sense_rc = transport_generic_new_cmd(se_cmd);
566 if (sense_rc)
567 return -EINVAL;
568
569 if (se_cmd->data_direction == DMA_TO_DEVICE)
570 target_execute_cmd(se_cmd);
571
572 wait_for_completion_interruptible(&xpt_cmd->xpt_passthrough_sem);
573
574 pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n",
575 se_cmd->scsi_status);
576
577 return (se_cmd->scsi_status) ? -EINVAL : 0;
578}
579
580static int target_xcopy_read_source(
581 struct se_cmd *ec_cmd,
582 struct xcopy_op *xop,
583 struct se_device *src_dev,
584 sector_t src_lba,
585 u32 src_bytes)
586{
587 struct xcopy_pt_cmd xpt_cmd;
588 struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
589 u32 transfer_length_block = src_bytes / src_dev->dev_attrib.block_size;
590 int rc;
591 unsigned char cdb[16];
592 bool remote_port = (xop->op_origin == XCOL_DEST_RECV_OP);
593
594 memset(&xpt_cmd, 0, sizeof(xpt_cmd));
595 init_completion(&xpt_cmd.xpt_passthrough_sem);
596
597 memset(&cdb[0], 0, 16);
598 cdb[0] = READ_16;
599 put_unaligned_be64(src_lba, &cdb[2]);
600 put_unaligned_be32(transfer_length_block, &cdb[10]);
601 pr_debug("XCOPY: Built READ_16: LBA: %llu Blocks: %u Length: %u\n",
602 (unsigned long long)src_lba, transfer_length_block, src_bytes);
603
604 __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, src_bytes,
605 DMA_FROM_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0);
606
607 rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, src_dev, &cdb[0],
608 remote_port);
609 if (rc < 0) {
610 ec_cmd->scsi_status = se_cmd->scsi_status;
611 goto out;
612 }
613
614 pr_debug("XCOPY-READ: Saved xop->xop_data_sg: %p, num: %u for READ"
615 " memory\n", xop->xop_data_sg, xop->xop_data_nents);
616
617 rc = target_xcopy_issue_pt_cmd(&xpt_cmd);
618 if (rc < 0)
619 ec_cmd->scsi_status = se_cmd->scsi_status;
620out:
621 transport_generic_free_cmd(se_cmd, 0);
622 return rc;
623}
624
625static int target_xcopy_write_destination(
626 struct se_cmd *ec_cmd,
627 struct xcopy_op *xop,
628 struct se_device *dst_dev,
629 sector_t dst_lba,
630 u32 dst_bytes)
631{
632 struct xcopy_pt_cmd xpt_cmd;
633 struct se_cmd *se_cmd = &xpt_cmd.se_cmd;
634 u32 transfer_length_block = dst_bytes / dst_dev->dev_attrib.block_size;
635 int rc;
636 unsigned char cdb[16];
637 bool remote_port = (xop->op_origin == XCOL_SOURCE_RECV_OP);
638
639 memset(&xpt_cmd, 0, sizeof(xpt_cmd));
640 init_completion(&xpt_cmd.xpt_passthrough_sem);
641
642 memset(&cdb[0], 0, 16);
643 cdb[0] = WRITE_16;
644 put_unaligned_be64(dst_lba, &cdb[2]);
645 put_unaligned_be32(transfer_length_block, &cdb[10]);
646 pr_debug("XCOPY: Built WRITE_16: LBA: %llu Blocks: %u Length: %u\n",
647 (unsigned long long)dst_lba, transfer_length_block, dst_bytes);
648
649 __target_init_cmd(se_cmd, &xcopy_pt_tfo, &xcopy_pt_sess, dst_bytes,
650 DMA_TO_DEVICE, 0, &xpt_cmd.sense_buffer[0], 0);
651
652 rc = target_xcopy_setup_pt_cmd(&xpt_cmd, xop, dst_dev, &cdb[0],
653 remote_port);
654 if (rc < 0) {
655 ec_cmd->scsi_status = se_cmd->scsi_status;
656 goto out;
657 }
658
659 rc = target_xcopy_issue_pt_cmd(&xpt_cmd);
660 if (rc < 0)
661 ec_cmd->scsi_status = se_cmd->scsi_status;
662out:
663 transport_generic_free_cmd(se_cmd, 0);
664 return rc;
665}
666
667static void target_xcopy_do_work(struct work_struct *work)
668{
669 struct xcopy_op *xop = container_of(work, struct xcopy_op, xop_work);
670 struct se_cmd *ec_cmd = xop->xop_se_cmd;
671 struct se_device *src_dev, *dst_dev;
672 sector_t src_lba, dst_lba, end_lba;
673 unsigned long long max_bytes, max_bytes_src, max_bytes_dst, max_blocks;
674 int rc = 0;
675 unsigned short nolb;
676 unsigned int copied_bytes = 0;
677 sense_reason_t sense_rc;
678
679 sense_rc = target_parse_xcopy_cmd(xop);
680 if (sense_rc != TCM_NO_SENSE)
681 goto err_free;
682
683 if (WARN_ON_ONCE(!xop->src_dev) || WARN_ON_ONCE(!xop->dst_dev)) {
684 sense_rc = TCM_INVALID_PARAMETER_LIST;
685 goto err_free;
686 }
687
688 src_dev = xop->src_dev;
689 dst_dev = xop->dst_dev;
690 src_lba = xop->src_lba;
691 dst_lba = xop->dst_lba;
692 nolb = xop->nolb;
693 end_lba = src_lba + nolb;
694 /*
695 * Break up XCOPY I/O into hw_max_sectors * hw_block_size sized
696 * I/O based on the smallest max_bytes between src_dev + dst_dev
697 */
698 max_bytes_src = (unsigned long long) src_dev->dev_attrib.hw_max_sectors *
699 src_dev->dev_attrib.hw_block_size;
700 max_bytes_dst = (unsigned long long) dst_dev->dev_attrib.hw_max_sectors *
701 dst_dev->dev_attrib.hw_block_size;
702
703 max_bytes = min_t(u64, max_bytes_src, max_bytes_dst);
704 max_bytes = min_t(u64, max_bytes, XCOPY_MAX_BYTES);
705
706 /*
707 * Using shift instead of the division because otherwise GCC
708 * generates __udivdi3 that is missing on i386
709 */
710 max_blocks = max_bytes >> ilog2(src_dev->dev_attrib.block_size);
711
712 pr_debug("%s: nolb: %u, max_blocks: %llu end_lba: %llu\n", __func__,
713 nolb, max_blocks, (unsigned long long)end_lba);
714 pr_debug("%s: Starting src_lba: %llu, dst_lba: %llu\n", __func__,
715 (unsigned long long)src_lba, (unsigned long long)dst_lba);
716
717 while (nolb) {
718 u32 cur_bytes = min_t(u64, max_bytes, nolb * src_dev->dev_attrib.block_size);
719 unsigned short cur_nolb = cur_bytes / src_dev->dev_attrib.block_size;
720
721 if (cur_bytes != xop->xop_data_bytes) {
722 /*
723 * (Re)allocate a buffer large enough to hold the XCOPY
724 * I/O size, which can be reused each read / write loop.
725 */
726 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
727 rc = target_alloc_sgl(&xop->xop_data_sg,
728 &xop->xop_data_nents,
729 cur_bytes,
730 false, false);
731 if (rc < 0)
732 goto out;
733 xop->xop_data_bytes = cur_bytes;
734 }
735
736 pr_debug("%s: Calling read src_dev: %p src_lba: %llu, cur_nolb: %hu\n",
737 __func__, src_dev, (unsigned long long)src_lba, cur_nolb);
738
739 rc = target_xcopy_read_source(ec_cmd, xop, src_dev, src_lba, cur_bytes);
740 if (rc < 0)
741 goto out;
742
743 src_lba += cur_bytes / src_dev->dev_attrib.block_size;
744 pr_debug("%s: Incremented READ src_lba to %llu\n", __func__,
745 (unsigned long long)src_lba);
746
747 pr_debug("%s: Calling write dst_dev: %p dst_lba: %llu, cur_nolb: %u\n",
748 __func__, dst_dev, (unsigned long long)dst_lba, cur_nolb);
749
750 rc = target_xcopy_write_destination(ec_cmd, xop, dst_dev,
751 dst_lba, cur_bytes);
752 if (rc < 0)
753 goto out;
754
755 dst_lba += cur_bytes / dst_dev->dev_attrib.block_size;
756 pr_debug("%s: Incremented WRITE dst_lba to %llu\n", __func__,
757 (unsigned long long)dst_lba);
758
759 copied_bytes += cur_bytes;
760 nolb -= cur_bytes / src_dev->dev_attrib.block_size;
761 }
762
763 xcopy_pt_undepend_remotedev(xop);
764 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
765 kfree(xop);
766
767 pr_debug("%s: Final src_lba: %llu, dst_lba: %llu\n", __func__,
768 (unsigned long long)src_lba, (unsigned long long)dst_lba);
769 pr_debug("%s: Blocks copied: %u, Bytes Copied: %u\n", __func__,
770 copied_bytes / dst_dev->dev_attrib.block_size, copied_bytes);
771
772 pr_debug("%s: Setting X-COPY GOOD status -> sending response\n", __func__);
773 target_complete_cmd(ec_cmd, SAM_STAT_GOOD);
774 return;
775
776out:
777 /*
778 * The XCOPY command was aborted after some data was transferred.
779 * Terminate command with CHECK CONDITION status, with the sense key
780 * set to COPY ABORTED.
781 */
782 sense_rc = TCM_COPY_TARGET_DEVICE_NOT_REACHABLE;
783 xcopy_pt_undepend_remotedev(xop);
784 target_free_sgl(xop->xop_data_sg, xop->xop_data_nents);
785
786err_free:
787 kfree(xop);
788 pr_warn_ratelimited("%s: rc: %d, sense: %u, XCOPY operation failed\n",
789 __func__, rc, sense_rc);
790 target_complete_cmd_with_sense(ec_cmd, SAM_STAT_CHECK_CONDITION, sense_rc);
791}
792
793/*
794 * Returns TCM_NO_SENSE upon success or a sense code != TCM_NO_SENSE if parsing
795 * fails.
796 */
797static sense_reason_t target_parse_xcopy_cmd(struct xcopy_op *xop)
798{
799 struct se_cmd *se_cmd = xop->xop_se_cmd;
800 unsigned char *p = NULL, *seg_desc;
801 unsigned int list_id, list_id_usage, sdll, inline_dl;
802 sense_reason_t ret = TCM_INVALID_PARAMETER_LIST;
803 int rc;
804 unsigned short tdll;
805
806 p = transport_kmap_data_sg(se_cmd);
807 if (!p) {
808 pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n");
809 return TCM_OUT_OF_RESOURCES;
810 }
811
812 list_id = p[0];
813 list_id_usage = (p[1] & 0x18) >> 3;
814
815 /*
816 * Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH
817 */
818 tdll = get_unaligned_be16(&p[2]);
819 sdll = get_unaligned_be32(&p[8]);
820 if (tdll + sdll > RCR_OP_MAX_DESC_LIST_LEN) {
821 pr_err("XCOPY descriptor list length %u exceeds maximum %u\n",
822 tdll + sdll, RCR_OP_MAX_DESC_LIST_LEN);
823 ret = TCM_PARAMETER_LIST_LENGTH_ERROR;
824 goto out;
825 }
826
827 inline_dl = get_unaligned_be32(&p[12]);
828 if (inline_dl != 0) {
829 pr_err("XCOPY with non zero inline data length\n");
830 goto out;
831 }
832
833 if (se_cmd->data_length < (XCOPY_HDR_LEN + tdll + sdll + inline_dl)) {
834 pr_err("XCOPY parameter truncation: data length %u too small "
835 "for tdll: %hu sdll: %u inline_dl: %u\n",
836 se_cmd->data_length, tdll, sdll, inline_dl);
837 ret = TCM_PARAMETER_LIST_LENGTH_ERROR;
838 goto out;
839 }
840
841 pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x"
842 " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage,
843 tdll, sdll, inline_dl);
844
845 /*
846 * skip over the target descriptors until segment descriptors
847 * have been passed - CSCD ids are needed to determine src and dest.
848 */
849 seg_desc = &p[16] + tdll;
850
851 rc = target_xcopy_parse_segment_descriptors(xop, seg_desc, sdll, &ret);
852 if (rc <= 0)
853 goto out;
854
855 pr_debug("XCOPY: Processed %d segment descriptors, length: %u\n", rc,
856 rc * XCOPY_SEGMENT_DESC_LEN);
857
858 rc = target_xcopy_parse_target_descriptors(se_cmd, xop, &p[16], tdll, &ret);
859 if (rc <= 0)
860 goto out;
861
862 if (xop->src_dev->dev_attrib.block_size !=
863 xop->dst_dev->dev_attrib.block_size) {
864 pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev"
865 " block_size: %u currently unsupported\n",
866 xop->src_dev->dev_attrib.block_size,
867 xop->dst_dev->dev_attrib.block_size);
868 xcopy_pt_undepend_remotedev(xop);
869 ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
870 goto out;
871 }
872
873 pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc,
874 rc * XCOPY_TARGET_DESC_LEN);
875 transport_kunmap_data_sg(se_cmd);
876 return TCM_NO_SENSE;
877
878out:
879 if (p)
880 transport_kunmap_data_sg(se_cmd);
881 return ret;
882}
883
884sense_reason_t target_do_xcopy(struct se_cmd *se_cmd)
885{
886 struct se_device *dev = se_cmd->se_dev;
887 struct xcopy_op *xop;
888 unsigned int sa;
889
890 if (!dev->dev_attrib.emulate_3pc) {
891 pr_err("EXTENDED_COPY operation explicitly disabled\n");
892 return TCM_UNSUPPORTED_SCSI_OPCODE;
893 }
894
895 sa = se_cmd->t_task_cdb[1] & 0x1f;
896 if (sa != 0x00) {
897 pr_err("EXTENDED_COPY(LID4) not supported\n");
898 return TCM_UNSUPPORTED_SCSI_OPCODE;
899 }
900
901 if (se_cmd->data_length == 0) {
902 target_complete_cmd(se_cmd, SAM_STAT_GOOD);
903 return TCM_NO_SENSE;
904 }
905 if (se_cmd->data_length < XCOPY_HDR_LEN) {
906 pr_err("XCOPY parameter truncation: length %u < hdr_len %u\n",
907 se_cmd->data_length, XCOPY_HDR_LEN);
908 return TCM_PARAMETER_LIST_LENGTH_ERROR;
909 }
910
911 xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
912 if (!xop)
913 goto err;
914 xop->xop_se_cmd = se_cmd;
915 INIT_WORK(&xop->xop_work, target_xcopy_do_work);
916 if (WARN_ON_ONCE(!queue_work(xcopy_wq, &xop->xop_work)))
917 goto free;
918 return TCM_NO_SENSE;
919
920free:
921 kfree(xop);
922
923err:
924 return TCM_OUT_OF_RESOURCES;
925}
926
927static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd)
928{
929 unsigned char *p;
930
931 p = transport_kmap_data_sg(se_cmd);
932 if (!p) {
933 pr_err("transport_kmap_data_sg failed in"
934 " target_rcr_operating_parameters\n");
935 return TCM_OUT_OF_RESOURCES;
936 }
937
938 if (se_cmd->data_length < 54) {
939 pr_err("Receive Copy Results Op Parameters length"
940 " too small: %u\n", se_cmd->data_length);
941 transport_kunmap_data_sg(se_cmd);
942 return TCM_INVALID_CDB_FIELD;
943 }
944 /*
945 * Set SNLID=1 (Supports no List ID)
946 */
947 p[4] = 0x1;
948 /*
949 * MAXIMUM TARGET DESCRIPTOR COUNT
950 */
951 put_unaligned_be16(RCR_OP_MAX_TARGET_DESC_COUNT, &p[8]);
952 /*
953 * MAXIMUM SEGMENT DESCRIPTOR COUNT
954 */
955 put_unaligned_be16(RCR_OP_MAX_SG_DESC_COUNT, &p[10]);
956 /*
957 * MAXIMUM DESCRIPTOR LIST LENGTH
958 */
959 put_unaligned_be32(RCR_OP_MAX_DESC_LIST_LEN, &p[12]);
960 /*
961 * MAXIMUM SEGMENT LENGTH
962 */
963 put_unaligned_be32(RCR_OP_MAX_SEGMENT_LEN, &p[16]);
964 /*
965 * MAXIMUM INLINE DATA LENGTH for SA 0x04 (NOT SUPPORTED)
966 */
967 put_unaligned_be32(0x0, &p[20]);
968 /*
969 * HELD DATA LIMIT
970 */
971 put_unaligned_be32(0x0, &p[24]);
972 /*
973 * MAXIMUM STREAM DEVICE TRANSFER SIZE
974 */
975 put_unaligned_be32(0x0, &p[28]);
976 /*
977 * TOTAL CONCURRENT COPIES
978 */
979 put_unaligned_be16(RCR_OP_TOTAL_CONCURR_COPIES, &p[34]);
980 /*
981 * MAXIMUM CONCURRENT COPIES
982 */
983 p[36] = RCR_OP_MAX_CONCURR_COPIES;
984 /*
985 * DATA SEGMENT GRANULARITY (log 2)
986 */
987 p[37] = RCR_OP_DATA_SEG_GRAN_LOG2;
988 /*
989 * INLINE DATA GRANULARITY log 2)
990 */
991 p[38] = RCR_OP_INLINE_DATA_GRAN_LOG2;
992 /*
993 * HELD DATA GRANULARITY
994 */
995 p[39] = RCR_OP_HELD_DATA_GRAN_LOG2;
996 /*
997 * IMPLEMENTED DESCRIPTOR LIST LENGTH
998 */
999 p[43] = 0x2;
1000 /*
1001 * List of implemented descriptor type codes (ordered)
1002 */
1003 p[44] = 0x02; /* Copy Block to Block device */
1004 p[45] = 0xe4; /* Identification descriptor target descriptor */
1005
1006 /*
1007 * AVAILABLE DATA (n-3)
1008 */
1009 put_unaligned_be32(42, &p[0]);
1010
1011 transport_kunmap_data_sg(se_cmd);
1012 target_complete_cmd(se_cmd, SAM_STAT_GOOD);
1013
1014 return TCM_NO_SENSE;
1015}
1016
1017sense_reason_t target_do_receive_copy_results(struct se_cmd *se_cmd)
1018{
1019 unsigned char *cdb = &se_cmd->t_task_cdb[0];
1020 int sa = (cdb[1] & 0x1f), list_id = cdb[2];
1021 struct se_device *dev = se_cmd->se_dev;
1022 sense_reason_t rc = TCM_NO_SENSE;
1023
1024 if (!dev->dev_attrib.emulate_3pc) {
1025 pr_debug("Third-party copy operations explicitly disabled\n");
1026 return TCM_UNSUPPORTED_SCSI_OPCODE;
1027 }
1028
1029 pr_debug("Entering target_do_receive_copy_results: SA: 0x%02x, List ID:"
1030 " 0x%02x, AL: %u\n", sa, list_id, se_cmd->data_length);
1031
1032 if (list_id != 0) {
1033 pr_err("Receive Copy Results with non zero list identifier"
1034 " not supported\n");
1035 return TCM_INVALID_CDB_FIELD;
1036 }
1037
1038 switch (sa) {
1039 case RCR_SA_OPERATING_PARAMETERS:
1040 rc = target_rcr_operating_parameters(se_cmd);
1041 break;
1042 case RCR_SA_COPY_STATUS:
1043 case RCR_SA_RECEIVE_DATA:
1044 case RCR_SA_FAILED_SEGMENT_DETAILS:
1045 default:
1046 pr_err("Unsupported SA for receive copy results: 0x%02x\n", sa);
1047 return TCM_INVALID_CDB_FIELD;
1048 }
1049
1050 return rc;
1051}