Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
   1/*
   2 * B53 switch driver main logic
   3 *
   4 * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org>
   5 * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com>
   6 *
   7 * Permission to use, copy, modify, and/or distribute this software for any
   8 * purpose with or without fee is hereby granted, provided that the above
   9 * copyright notice and this permission notice appear in all copies.
  10 *
  11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  18 */
  19
  20#include <linux/delay.h>
  21#include <linux/export.h>
  22#include <linux/gpio.h>
  23#include <linux/kernel.h>
  24#include <linux/module.h>
  25#include <linux/platform_data/b53.h>
  26#include <linux/phy.h>
  27#include <linux/phylink.h>
  28#include <linux/etherdevice.h>
  29#include <linux/if_bridge.h>
  30#include <net/dsa.h>
  31
  32#include "b53_regs.h"
  33#include "b53_priv.h"
  34
  35struct b53_mib_desc {
  36	u8 size;
  37	u8 offset;
  38	const char *name;
  39};
  40
  41/* BCM5365 MIB counters */
  42static const struct b53_mib_desc b53_mibs_65[] = {
  43	{ 8, 0x00, "TxOctets" },
  44	{ 4, 0x08, "TxDropPkts" },
  45	{ 4, 0x10, "TxBroadcastPkts" },
  46	{ 4, 0x14, "TxMulticastPkts" },
  47	{ 4, 0x18, "TxUnicastPkts" },
  48	{ 4, 0x1c, "TxCollisions" },
  49	{ 4, 0x20, "TxSingleCollision" },
  50	{ 4, 0x24, "TxMultipleCollision" },
  51	{ 4, 0x28, "TxDeferredTransmit" },
  52	{ 4, 0x2c, "TxLateCollision" },
  53	{ 4, 0x30, "TxExcessiveCollision" },
  54	{ 4, 0x38, "TxPausePkts" },
  55	{ 8, 0x44, "RxOctets" },
  56	{ 4, 0x4c, "RxUndersizePkts" },
  57	{ 4, 0x50, "RxPausePkts" },
  58	{ 4, 0x54, "Pkts64Octets" },
  59	{ 4, 0x58, "Pkts65to127Octets" },
  60	{ 4, 0x5c, "Pkts128to255Octets" },
  61	{ 4, 0x60, "Pkts256to511Octets" },
  62	{ 4, 0x64, "Pkts512to1023Octets" },
  63	{ 4, 0x68, "Pkts1024to1522Octets" },
  64	{ 4, 0x6c, "RxOversizePkts" },
  65	{ 4, 0x70, "RxJabbers" },
  66	{ 4, 0x74, "RxAlignmentErrors" },
  67	{ 4, 0x78, "RxFCSErrors" },
  68	{ 8, 0x7c, "RxGoodOctets" },
  69	{ 4, 0x84, "RxDropPkts" },
  70	{ 4, 0x88, "RxUnicastPkts" },
  71	{ 4, 0x8c, "RxMulticastPkts" },
  72	{ 4, 0x90, "RxBroadcastPkts" },
  73	{ 4, 0x94, "RxSAChanges" },
  74	{ 4, 0x98, "RxFragments" },
  75};
  76
  77#define B53_MIBS_65_SIZE	ARRAY_SIZE(b53_mibs_65)
  78
  79/* BCM63xx MIB counters */
  80static const struct b53_mib_desc b53_mibs_63xx[] = {
  81	{ 8, 0x00, "TxOctets" },
  82	{ 4, 0x08, "TxDropPkts" },
  83	{ 4, 0x0c, "TxQoSPkts" },
  84	{ 4, 0x10, "TxBroadcastPkts" },
  85	{ 4, 0x14, "TxMulticastPkts" },
  86	{ 4, 0x18, "TxUnicastPkts" },
  87	{ 4, 0x1c, "TxCollisions" },
  88	{ 4, 0x20, "TxSingleCollision" },
  89	{ 4, 0x24, "TxMultipleCollision" },
  90	{ 4, 0x28, "TxDeferredTransmit" },
  91	{ 4, 0x2c, "TxLateCollision" },
  92	{ 4, 0x30, "TxExcessiveCollision" },
  93	{ 4, 0x38, "TxPausePkts" },
  94	{ 8, 0x3c, "TxQoSOctets" },
  95	{ 8, 0x44, "RxOctets" },
  96	{ 4, 0x4c, "RxUndersizePkts" },
  97	{ 4, 0x50, "RxPausePkts" },
  98	{ 4, 0x54, "Pkts64Octets" },
  99	{ 4, 0x58, "Pkts65to127Octets" },
 100	{ 4, 0x5c, "Pkts128to255Octets" },
 101	{ 4, 0x60, "Pkts256to511Octets" },
 102	{ 4, 0x64, "Pkts512to1023Octets" },
 103	{ 4, 0x68, "Pkts1024to1522Octets" },
 104	{ 4, 0x6c, "RxOversizePkts" },
 105	{ 4, 0x70, "RxJabbers" },
 106	{ 4, 0x74, "RxAlignmentErrors" },
 107	{ 4, 0x78, "RxFCSErrors" },
 108	{ 8, 0x7c, "RxGoodOctets" },
 109	{ 4, 0x84, "RxDropPkts" },
 110	{ 4, 0x88, "RxUnicastPkts" },
 111	{ 4, 0x8c, "RxMulticastPkts" },
 112	{ 4, 0x90, "RxBroadcastPkts" },
 113	{ 4, 0x94, "RxSAChanges" },
 114	{ 4, 0x98, "RxFragments" },
 115	{ 4, 0xa0, "RxSymbolErrors" },
 116	{ 4, 0xa4, "RxQoSPkts" },
 117	{ 8, 0xa8, "RxQoSOctets" },
 118	{ 4, 0xb0, "Pkts1523to2047Octets" },
 119	{ 4, 0xb4, "Pkts2048to4095Octets" },
 120	{ 4, 0xb8, "Pkts4096to8191Octets" },
 121	{ 4, 0xbc, "Pkts8192to9728Octets" },
 122	{ 4, 0xc0, "RxDiscarded" },
 123};
 124
 125#define B53_MIBS_63XX_SIZE	ARRAY_SIZE(b53_mibs_63xx)
 126
 127/* MIB counters */
 128static const struct b53_mib_desc b53_mibs[] = {
 129	{ 8, 0x00, "TxOctets" },
 130	{ 4, 0x08, "TxDropPkts" },
 131	{ 4, 0x10, "TxBroadcastPkts" },
 132	{ 4, 0x14, "TxMulticastPkts" },
 133	{ 4, 0x18, "TxUnicastPkts" },
 134	{ 4, 0x1c, "TxCollisions" },
 135	{ 4, 0x20, "TxSingleCollision" },
 136	{ 4, 0x24, "TxMultipleCollision" },
 137	{ 4, 0x28, "TxDeferredTransmit" },
 138	{ 4, 0x2c, "TxLateCollision" },
 139	{ 4, 0x30, "TxExcessiveCollision" },
 140	{ 4, 0x38, "TxPausePkts" },
 141	{ 8, 0x50, "RxOctets" },
 142	{ 4, 0x58, "RxUndersizePkts" },
 143	{ 4, 0x5c, "RxPausePkts" },
 144	{ 4, 0x60, "Pkts64Octets" },
 145	{ 4, 0x64, "Pkts65to127Octets" },
 146	{ 4, 0x68, "Pkts128to255Octets" },
 147	{ 4, 0x6c, "Pkts256to511Octets" },
 148	{ 4, 0x70, "Pkts512to1023Octets" },
 149	{ 4, 0x74, "Pkts1024to1522Octets" },
 150	{ 4, 0x78, "RxOversizePkts" },
 151	{ 4, 0x7c, "RxJabbers" },
 152	{ 4, 0x80, "RxAlignmentErrors" },
 153	{ 4, 0x84, "RxFCSErrors" },
 154	{ 8, 0x88, "RxGoodOctets" },
 155	{ 4, 0x90, "RxDropPkts" },
 156	{ 4, 0x94, "RxUnicastPkts" },
 157	{ 4, 0x98, "RxMulticastPkts" },
 158	{ 4, 0x9c, "RxBroadcastPkts" },
 159	{ 4, 0xa0, "RxSAChanges" },
 160	{ 4, 0xa4, "RxFragments" },
 161	{ 4, 0xa8, "RxJumboPkts" },
 162	{ 4, 0xac, "RxSymbolErrors" },
 163	{ 4, 0xc0, "RxDiscarded" },
 164};
 165
 166#define B53_MIBS_SIZE	ARRAY_SIZE(b53_mibs)
 167
 168static const struct b53_mib_desc b53_mibs_58xx[] = {
 169	{ 8, 0x00, "TxOctets" },
 170	{ 4, 0x08, "TxDropPkts" },
 171	{ 4, 0x0c, "TxQPKTQ0" },
 172	{ 4, 0x10, "TxBroadcastPkts" },
 173	{ 4, 0x14, "TxMulticastPkts" },
 174	{ 4, 0x18, "TxUnicastPKts" },
 175	{ 4, 0x1c, "TxCollisions" },
 176	{ 4, 0x20, "TxSingleCollision" },
 177	{ 4, 0x24, "TxMultipleCollision" },
 178	{ 4, 0x28, "TxDeferredCollision" },
 179	{ 4, 0x2c, "TxLateCollision" },
 180	{ 4, 0x30, "TxExcessiveCollision" },
 181	{ 4, 0x34, "TxFrameInDisc" },
 182	{ 4, 0x38, "TxPausePkts" },
 183	{ 4, 0x3c, "TxQPKTQ1" },
 184	{ 4, 0x40, "TxQPKTQ2" },
 185	{ 4, 0x44, "TxQPKTQ3" },
 186	{ 4, 0x48, "TxQPKTQ4" },
 187	{ 4, 0x4c, "TxQPKTQ5" },
 188	{ 8, 0x50, "RxOctets" },
 189	{ 4, 0x58, "RxUndersizePkts" },
 190	{ 4, 0x5c, "RxPausePkts" },
 191	{ 4, 0x60, "RxPkts64Octets" },
 192	{ 4, 0x64, "RxPkts65to127Octets" },
 193	{ 4, 0x68, "RxPkts128to255Octets" },
 194	{ 4, 0x6c, "RxPkts256to511Octets" },
 195	{ 4, 0x70, "RxPkts512to1023Octets" },
 196	{ 4, 0x74, "RxPkts1024toMaxPktsOctets" },
 197	{ 4, 0x78, "RxOversizePkts" },
 198	{ 4, 0x7c, "RxJabbers" },
 199	{ 4, 0x80, "RxAlignmentErrors" },
 200	{ 4, 0x84, "RxFCSErrors" },
 201	{ 8, 0x88, "RxGoodOctets" },
 202	{ 4, 0x90, "RxDropPkts" },
 203	{ 4, 0x94, "RxUnicastPkts" },
 204	{ 4, 0x98, "RxMulticastPkts" },
 205	{ 4, 0x9c, "RxBroadcastPkts" },
 206	{ 4, 0xa0, "RxSAChanges" },
 207	{ 4, 0xa4, "RxFragments" },
 208	{ 4, 0xa8, "RxJumboPkt" },
 209	{ 4, 0xac, "RxSymblErr" },
 210	{ 4, 0xb0, "InRangeErrCount" },
 211	{ 4, 0xb4, "OutRangeErrCount" },
 212	{ 4, 0xb8, "EEELpiEvent" },
 213	{ 4, 0xbc, "EEELpiDuration" },
 214	{ 4, 0xc0, "RxDiscard" },
 215	{ 4, 0xc8, "TxQPKTQ6" },
 216	{ 4, 0xcc, "TxQPKTQ7" },
 217	{ 4, 0xd0, "TxPkts64Octets" },
 218	{ 4, 0xd4, "TxPkts65to127Octets" },
 219	{ 4, 0xd8, "TxPkts128to255Octets" },
 220	{ 4, 0xdc, "TxPkts256to511Ocets" },
 221	{ 4, 0xe0, "TxPkts512to1023Ocets" },
 222	{ 4, 0xe4, "TxPkts1024toMaxPktOcets" },
 223};
 224
 225#define B53_MIBS_58XX_SIZE	ARRAY_SIZE(b53_mibs_58xx)
 226
 227static int b53_do_vlan_op(struct b53_device *dev, u8 op)
 228{
 229	unsigned int i;
 230
 231	b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op);
 232
 233	for (i = 0; i < 10; i++) {
 234		u8 vta;
 235
 236		b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta);
 237		if (!(vta & VTA_START_CMD))
 238			return 0;
 239
 240		usleep_range(100, 200);
 241	}
 242
 243	return -EIO;
 244}
 245
 246static void b53_set_vlan_entry(struct b53_device *dev, u16 vid,
 247			       struct b53_vlan *vlan)
 248{
 249	if (is5325(dev)) {
 250		u32 entry = 0;
 251
 252		if (vlan->members) {
 253			entry = ((vlan->untag & VA_UNTAG_MASK_25) <<
 254				 VA_UNTAG_S_25) | vlan->members;
 255			if (dev->core_rev >= 3)
 256				entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S;
 257			else
 258				entry |= VA_VALID_25;
 259		}
 260
 261		b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry);
 262		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
 263			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
 264	} else if (is5365(dev)) {
 265		u16 entry = 0;
 266
 267		if (vlan->members)
 268			entry = ((vlan->untag & VA_UNTAG_MASK_65) <<
 269				 VA_UNTAG_S_65) | vlan->members | VA_VALID_65;
 270
 271		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry);
 272		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
 273			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
 274	} else {
 275		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
 276		b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2],
 277			    (vlan->untag << VTE_UNTAG_S) | vlan->members);
 278
 279		b53_do_vlan_op(dev, VTA_CMD_WRITE);
 280	}
 281
 282	dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n",
 283		vid, vlan->members, vlan->untag);
 284}
 285
 286static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
 287			       struct b53_vlan *vlan)
 288{
 289	if (is5325(dev)) {
 290		u32 entry = 0;
 291
 292		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid |
 293			    VTA_RW_STATE_RD | VTA_RW_OP_EN);
 294		b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry);
 295
 296		if (dev->core_rev >= 3)
 297			vlan->valid = !!(entry & VA_VALID_25_R4);
 298		else
 299			vlan->valid = !!(entry & VA_VALID_25);
 300		vlan->members = entry & VA_MEMBER_MASK;
 301		vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25;
 302
 303	} else if (is5365(dev)) {
 304		u16 entry = 0;
 305
 306		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid |
 307			    VTA_RW_STATE_WR | VTA_RW_OP_EN);
 308		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry);
 309
 310		vlan->valid = !!(entry & VA_VALID_65);
 311		vlan->members = entry & VA_MEMBER_MASK;
 312		vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65;
 313	} else {
 314		u32 entry = 0;
 315
 316		b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid);
 317		b53_do_vlan_op(dev, VTA_CMD_READ);
 318		b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry);
 319		vlan->members = entry & VTE_MEMBERS;
 320		vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS;
 321		vlan->valid = true;
 322	}
 323}
 324
 325static void b53_set_forwarding(struct b53_device *dev, int enable)
 326{
 327	u8 mgmt;
 328
 329	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 330
 331	if (enable)
 332		mgmt |= SM_SW_FWD_EN;
 333	else
 334		mgmt &= ~SM_SW_FWD_EN;
 335
 336	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 337
 338	/* Include IMP port in dumb forwarding mode
 339	 */
 340	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
 341	mgmt |= B53_MII_DUMB_FWDG_EN;
 342	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
 343
 344	/* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether
 345	 * frames should be flooded or not.
 346	 */
 347	b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt);
 348	mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN;
 349	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
 350}
 351
 352static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
 353			    bool enable_filtering)
 354{
 355	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
 356
 357	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 358	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0);
 359	b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1);
 360
 361	if (is5325(dev) || is5365(dev)) {
 362		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
 363		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5);
 364	} else if (is63xx(dev)) {
 365		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4);
 366		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5);
 367	} else {
 368		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4);
 369		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5);
 370	}
 371
 372	if (enable) {
 373		vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID;
 374		vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN;
 375		vc4 &= ~VC4_ING_VID_CHECK_MASK;
 376		if (enable_filtering) {
 377			vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S;
 378			vc5 |= VC5_DROP_VTABLE_MISS;
 379		} else {
 380			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
 381			vc5 &= ~VC5_DROP_VTABLE_MISS;
 382		}
 383
 384		if (is5325(dev))
 385			vc0 &= ~VC0_RESERVED_1;
 386
 387		if (is5325(dev) || is5365(dev))
 388			vc1 |= VC1_RX_MCST_TAG_EN;
 389
 390	} else {
 391		vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID);
 392		vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN);
 393		vc4 &= ~VC4_ING_VID_CHECK_MASK;
 394		vc5 &= ~VC5_DROP_VTABLE_MISS;
 395
 396		if (is5325(dev) || is5365(dev))
 397			vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S;
 398		else
 399			vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S;
 400
 401		if (is5325(dev) || is5365(dev))
 402			vc1 &= ~VC1_RX_MCST_TAG_EN;
 403	}
 404
 405	if (!is5325(dev) && !is5365(dev))
 406		vc5 &= ~VC5_VID_FFF_EN;
 407
 408	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0);
 409	b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1);
 410
 411	if (is5325(dev) || is5365(dev)) {
 412		/* enable the high 8 bit vid check on 5325 */
 413		if (is5325(dev) && enable)
 414			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3,
 415				   VC3_HIGH_8BIT_EN);
 416		else
 417			b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
 418
 419		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4);
 420		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5);
 421	} else if (is63xx(dev)) {
 422		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0);
 423		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4);
 424		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5);
 425	} else {
 426		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0);
 427		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4);
 428		b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5);
 429	}
 430
 431	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 432
 433	dev->vlan_enabled = enable;
 434
 435	dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
 436		port, enable, enable_filtering);
 437}
 438
 439static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
 440{
 441	u32 port_mask = 0;
 442	u16 max_size = JMS_MIN_SIZE;
 443
 444	if (is5325(dev) || is5365(dev))
 445		return -EINVAL;
 446
 447	if (enable) {
 448		port_mask = dev->enabled_ports;
 449		max_size = JMS_MAX_SIZE;
 450		if (allow_10_100)
 451			port_mask |= JPM_10_100_JUMBO_EN;
 452	}
 453
 454	b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask);
 455	return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size);
 456}
 457
 458static int b53_flush_arl(struct b53_device *dev, u8 mask)
 459{
 460	unsigned int i;
 461
 462	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
 463		   FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask);
 464
 465	for (i = 0; i < 10; i++) {
 466		u8 fast_age_ctrl;
 467
 468		b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL,
 469			  &fast_age_ctrl);
 470
 471		if (!(fast_age_ctrl & FAST_AGE_DONE))
 472			goto out;
 473
 474		msleep(1);
 475	}
 476
 477	return -ETIMEDOUT;
 478out:
 479	/* Only age dynamic entries (default behavior) */
 480	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC);
 481	return 0;
 482}
 483
 484static int b53_fast_age_port(struct b53_device *dev, int port)
 485{
 486	b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port);
 487
 488	return b53_flush_arl(dev, FAST_AGE_PORT);
 489}
 490
 491static int b53_fast_age_vlan(struct b53_device *dev, u16 vid)
 492{
 493	b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid);
 494
 495	return b53_flush_arl(dev, FAST_AGE_VLAN);
 496}
 497
 498void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
 499{
 500	struct b53_device *dev = ds->priv;
 501	unsigned int i;
 502	u16 pvlan;
 503
 504	/* Enable the IMP port to be in the same VLAN as the other ports
 505	 * on a per-port basis such that we only have Port i and IMP in
 506	 * the same VLAN.
 507	 */
 508	b53_for_each_port(dev, i) {
 509		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan);
 510		pvlan |= BIT(cpu_port);
 511		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan);
 512	}
 513}
 514EXPORT_SYMBOL(b53_imp_vlan_setup);
 515
 516static void b53_port_set_ucast_flood(struct b53_device *dev, int port,
 517				     bool unicast)
 518{
 519	u16 uc;
 520
 521	b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc);
 522	if (unicast)
 523		uc |= BIT(port);
 524	else
 525		uc &= ~BIT(port);
 526	b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc);
 527}
 528
 529static void b53_port_set_mcast_flood(struct b53_device *dev, int port,
 530				     bool multicast)
 531{
 532	u16 mc;
 533
 534	b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc);
 535	if (multicast)
 536		mc |= BIT(port);
 537	else
 538		mc &= ~BIT(port);
 539	b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc);
 540
 541	b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc);
 542	if (multicast)
 543		mc |= BIT(port);
 544	else
 545		mc &= ~BIT(port);
 546	b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc);
 547}
 548
 549static void b53_port_set_learning(struct b53_device *dev, int port,
 550				  bool learning)
 551{
 552	u16 reg;
 553
 554	b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
 555	if (learning)
 556		reg &= ~BIT(port);
 557	else
 558		reg |= BIT(port);
 559	b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
 560}
 561
 562int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 563{
 564	struct b53_device *dev = ds->priv;
 565	unsigned int cpu_port;
 566	int ret = 0;
 567	u16 pvlan;
 568
 569	if (!dsa_is_user_port(ds, port))
 570		return 0;
 571
 572	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
 573
 574	b53_port_set_ucast_flood(dev, port, true);
 575	b53_port_set_mcast_flood(dev, port, true);
 576	b53_port_set_learning(dev, port, false);
 577
 578	if (dev->ops->irq_enable)
 579		ret = dev->ops->irq_enable(dev, port);
 580	if (ret)
 581		return ret;
 582
 583	/* Clear the Rx and Tx disable bits and set to no spanning tree */
 584	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
 585
 586	/* Set this port, and only this one to be in the default VLAN,
 587	 * if member of a bridge, restore its membership prior to
 588	 * bringing down this port.
 589	 */
 590	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
 591	pvlan &= ~0x1ff;
 592	pvlan |= BIT(port);
 593	pvlan |= dev->ports[port].vlan_ctl_mask;
 594	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
 595
 596	b53_imp_vlan_setup(ds, cpu_port);
 597
 598	/* If EEE was enabled, restore it */
 599	if (dev->ports[port].eee.eee_enabled)
 600		b53_eee_enable_set(ds, port, true);
 601
 602	return 0;
 603}
 604EXPORT_SYMBOL(b53_enable_port);
 605
 606void b53_disable_port(struct dsa_switch *ds, int port)
 607{
 608	struct b53_device *dev = ds->priv;
 609	u8 reg;
 610
 611	/* Disable Tx/Rx for the port */
 612	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
 613	reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE;
 614	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
 615
 616	if (dev->ops->irq_disable)
 617		dev->ops->irq_disable(dev, port);
 618}
 619EXPORT_SYMBOL(b53_disable_port);
 620
 621void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
 622{
 623	struct b53_device *dev = ds->priv;
 624	bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE);
 625	u8 hdr_ctl, val;
 626	u16 reg;
 627
 628	/* Resolve which bit controls the Broadcom tag */
 629	switch (port) {
 630	case 8:
 631		val = BRCM_HDR_P8_EN;
 632		break;
 633	case 7:
 634		val = BRCM_HDR_P7_EN;
 635		break;
 636	case 5:
 637		val = BRCM_HDR_P5_EN;
 638		break;
 639	default:
 640		val = 0;
 641		break;
 642	}
 643
 644	/* Enable management mode if tagging is requested */
 645	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl);
 646	if (tag_en)
 647		hdr_ctl |= SM_SW_FWD_MODE;
 648	else
 649		hdr_ctl &= ~SM_SW_FWD_MODE;
 650	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl);
 651
 652	/* Configure the appropriate IMP port */
 653	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl);
 654	if (port == 8)
 655		hdr_ctl |= GC_FRM_MGMT_PORT_MII;
 656	else if (port == 5)
 657		hdr_ctl |= GC_FRM_MGMT_PORT_M;
 658	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl);
 659
 660	/* Enable Broadcom tags for IMP port */
 661	b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
 662	if (tag_en)
 663		hdr_ctl |= val;
 664	else
 665		hdr_ctl &= ~val;
 666	b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
 667
 668	/* Registers below are only accessible on newer devices */
 669	if (!is58xx(dev))
 670		return;
 671
 672	/* Enable reception Broadcom tag for CPU TX (switch RX) to
 673	 * allow us to tag outgoing frames
 674	 */
 675	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, &reg);
 676	if (tag_en)
 677		reg &= ~BIT(port);
 678	else
 679		reg |= BIT(port);
 680	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
 681
 682	/* Enable transmission of Broadcom tags from the switch (CPU RX) to
 683	 * allow delivering frames to the per-port net_devices
 684	 */
 685	b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, &reg);
 686	if (tag_en)
 687		reg &= ~BIT(port);
 688	else
 689		reg |= BIT(port);
 690	b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
 691}
 692EXPORT_SYMBOL(b53_brcm_hdr_setup);
 693
 694static void b53_enable_cpu_port(struct b53_device *dev, int port)
 695{
 696	u8 port_ctrl;
 697
 698	/* BCM5325 CPU port is at 8 */
 699	if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
 700		port = B53_CPU_PORT;
 701
 702	port_ctrl = PORT_CTRL_RX_BCST_EN |
 703		    PORT_CTRL_RX_MCST_EN |
 704		    PORT_CTRL_RX_UCST_EN;
 705	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
 706
 707	b53_brcm_hdr_setup(dev->ds, port);
 708
 709	b53_port_set_ucast_flood(dev, port, true);
 710	b53_port_set_mcast_flood(dev, port, true);
 711	b53_port_set_learning(dev, port, false);
 712}
 713
 714static void b53_enable_mib(struct b53_device *dev)
 715{
 716	u8 gc;
 717
 718	b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
 719	gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN);
 720	b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc);
 721}
 722
 723static u16 b53_default_pvid(struct b53_device *dev)
 724{
 725	if (is5325(dev) || is5365(dev))
 726		return 1;
 727	else
 728		return 0;
 729}
 730
 731static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
 732{
 733	struct b53_device *dev = ds->priv;
 734
 735	return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
 736}
 737
 738int b53_configure_vlan(struct dsa_switch *ds)
 739{
 740	struct b53_device *dev = ds->priv;
 741	struct b53_vlan vl = { 0 };
 742	struct b53_vlan *v;
 743	int i, def_vid;
 744	u16 vid;
 745
 746	def_vid = b53_default_pvid(dev);
 747
 748	/* clear all vlan entries */
 749	if (is5325(dev) || is5365(dev)) {
 750		for (i = def_vid; i < dev->num_vlans; i++)
 751			b53_set_vlan_entry(dev, i, &vl);
 752	} else {
 753		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
 754	}
 755
 756	b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
 757
 758	/* Create an untagged VLAN entry for the default PVID in case
 759	 * CONFIG_VLAN_8021Q is disabled and there are no calls to
 760	 * dsa_slave_vlan_rx_add_vid() to create the default VLAN
 761	 * entry. Do this only when the tagging protocol is not
 762	 * DSA_TAG_PROTO_NONE
 763	 */
 764	b53_for_each_port(dev, i) {
 765		v = &dev->vlans[def_vid];
 766		v->members |= BIT(i);
 767		if (!b53_vlan_port_needs_forced_tagged(ds, i))
 768			v->untag = v->members;
 769		b53_write16(dev, B53_VLAN_PAGE,
 770			    B53_VLAN_PORT_DEF_TAG(i), def_vid);
 771	}
 772
 773	/* Upon initial call we have not set-up any VLANs, but upon
 774	 * system resume, we need to restore all VLAN entries.
 775	 */
 776	for (vid = def_vid; vid < dev->num_vlans; vid++) {
 777		v = &dev->vlans[vid];
 778
 779		if (!v->members)
 780			continue;
 781
 782		b53_set_vlan_entry(dev, vid, v);
 783		b53_fast_age_vlan(dev, vid);
 784	}
 785
 786	return 0;
 787}
 788EXPORT_SYMBOL(b53_configure_vlan);
 789
 790static void b53_switch_reset_gpio(struct b53_device *dev)
 791{
 792	int gpio = dev->reset_gpio;
 793
 794	if (gpio < 0)
 795		return;
 796
 797	/* Reset sequence: RESET low(50ms)->high(20ms)
 798	 */
 799	gpio_set_value(gpio, 0);
 800	mdelay(50);
 801
 802	gpio_set_value(gpio, 1);
 803	mdelay(20);
 804
 805	dev->current_page = 0xff;
 806}
 807
 808static int b53_switch_reset(struct b53_device *dev)
 809{
 810	unsigned int timeout = 1000;
 811	u8 mgmt, reg;
 812
 813	b53_switch_reset_gpio(dev);
 814
 815	if (is539x(dev)) {
 816		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83);
 817		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
 818	}
 819
 820	/* This is specific to 58xx devices here, do not use is58xx() which
 821	 * covers the larger Starfigther 2 family, including 7445/7278 which
 822	 * still use this driver as a library and need to perform the reset
 823	 * earlier.
 824	 */
 825	if (dev->chip_id == BCM58XX_DEVICE_ID ||
 826	    dev->chip_id == BCM583XX_DEVICE_ID) {
 827		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
 828		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
 829		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
 830
 831		do {
 832			b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
 833			if (!(reg & SW_RST))
 834				break;
 835
 836			usleep_range(1000, 2000);
 837		} while (timeout-- > 0);
 838
 839		if (timeout == 0) {
 840			dev_err(dev->dev,
 841				"Timeout waiting for SW_RST to clear!\n");
 842			return -ETIMEDOUT;
 843		}
 844	}
 845
 846	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 847
 848	if (!(mgmt & SM_SW_FWD_EN)) {
 849		mgmt &= ~SM_SW_FWD_MODE;
 850		mgmt |= SM_SW_FWD_EN;
 851
 852		b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 853		b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 854
 855		if (!(mgmt & SM_SW_FWD_EN)) {
 856			dev_err(dev->dev, "Failed to enable switch!\n");
 857			return -EINVAL;
 858		}
 859	}
 860
 861	b53_enable_mib(dev);
 862
 863	return b53_flush_arl(dev, FAST_AGE_STATIC);
 864}
 865
 866static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg)
 867{
 868	struct b53_device *priv = ds->priv;
 869	u16 value = 0;
 870	int ret;
 871
 872	if (priv->ops->phy_read16)
 873		ret = priv->ops->phy_read16(priv, addr, reg, &value);
 874	else
 875		ret = b53_read16(priv, B53_PORT_MII_PAGE(addr),
 876				 reg * 2, &value);
 877
 878	return ret ? ret : value;
 879}
 880
 881static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 882{
 883	struct b53_device *priv = ds->priv;
 884
 885	if (priv->ops->phy_write16)
 886		return priv->ops->phy_write16(priv, addr, reg, val);
 887
 888	return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val);
 889}
 890
 891static int b53_reset_switch(struct b53_device *priv)
 892{
 893	/* reset vlans */
 894	memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans);
 895	memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports);
 896
 897	priv->serdes_lane = B53_INVALID_LANE;
 898
 899	return b53_switch_reset(priv);
 900}
 901
 902static int b53_apply_config(struct b53_device *priv)
 903{
 904	/* disable switching */
 905	b53_set_forwarding(priv, 0);
 906
 907	b53_configure_vlan(priv->ds);
 908
 909	/* enable switching */
 910	b53_set_forwarding(priv, 1);
 911
 912	return 0;
 913}
 914
 915static void b53_reset_mib(struct b53_device *priv)
 916{
 917	u8 gc;
 918
 919	b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc);
 920
 921	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB);
 922	msleep(1);
 923	b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB);
 924	msleep(1);
 925}
 926
 927static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev)
 928{
 929	if (is5365(dev))
 930		return b53_mibs_65;
 931	else if (is63xx(dev))
 932		return b53_mibs_63xx;
 933	else if (is58xx(dev))
 934		return b53_mibs_58xx;
 935	else
 936		return b53_mibs;
 937}
 938
 939static unsigned int b53_get_mib_size(struct b53_device *dev)
 940{
 941	if (is5365(dev))
 942		return B53_MIBS_65_SIZE;
 943	else if (is63xx(dev))
 944		return B53_MIBS_63XX_SIZE;
 945	else if (is58xx(dev))
 946		return B53_MIBS_58XX_SIZE;
 947	else
 948		return B53_MIBS_SIZE;
 949}
 950
 951static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
 952{
 953	/* These ports typically do not have built-in PHYs */
 954	switch (port) {
 955	case B53_CPU_PORT_25:
 956	case 7:
 957	case B53_CPU_PORT:
 958		return NULL;
 959	}
 960
 961	return mdiobus_get_phy(ds->slave_mii_bus, port);
 962}
 963
 964void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
 965		     uint8_t *data)
 966{
 967	struct b53_device *dev = ds->priv;
 968	const struct b53_mib_desc *mibs = b53_get_mib(dev);
 969	unsigned int mib_size = b53_get_mib_size(dev);
 970	struct phy_device *phydev;
 971	unsigned int i;
 972
 973	if (stringset == ETH_SS_STATS) {
 974		for (i = 0; i < mib_size; i++)
 975			strscpy(data + i * ETH_GSTRING_LEN,
 976				mibs[i].name, ETH_GSTRING_LEN);
 977	} else if (stringset == ETH_SS_PHY_STATS) {
 978		phydev = b53_get_phy_device(ds, port);
 979		if (!phydev)
 980			return;
 981
 982		phy_ethtool_get_strings(phydev, data);
 983	}
 984}
 985EXPORT_SYMBOL(b53_get_strings);
 986
 987void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data)
 988{
 989	struct b53_device *dev = ds->priv;
 990	const struct b53_mib_desc *mibs = b53_get_mib(dev);
 991	unsigned int mib_size = b53_get_mib_size(dev);
 992	const struct b53_mib_desc *s;
 993	unsigned int i;
 994	u64 val = 0;
 995
 996	if (is5365(dev) && port == 5)
 997		port = 8;
 998
 999	mutex_lock(&dev->stats_mutex);
1000
1001	for (i = 0; i < mib_size; i++) {
1002		s = &mibs[i];
1003
1004		if (s->size == 8) {
1005			b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val);
1006		} else {
1007			u32 val32;
1008
1009			b53_read32(dev, B53_MIB_PAGE(port), s->offset,
1010				   &val32);
1011			val = val32;
1012		}
1013		data[i] = (u64)val;
1014	}
1015
1016	mutex_unlock(&dev->stats_mutex);
1017}
1018EXPORT_SYMBOL(b53_get_ethtool_stats);
1019
1020void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data)
1021{
1022	struct phy_device *phydev;
1023
1024	phydev = b53_get_phy_device(ds, port);
1025	if (!phydev)
1026		return;
1027
1028	phy_ethtool_get_stats(phydev, NULL, data);
1029}
1030EXPORT_SYMBOL(b53_get_ethtool_phy_stats);
1031
1032int b53_get_sset_count(struct dsa_switch *ds, int port, int sset)
1033{
1034	struct b53_device *dev = ds->priv;
1035	struct phy_device *phydev;
1036
1037	if (sset == ETH_SS_STATS) {
1038		return b53_get_mib_size(dev);
1039	} else if (sset == ETH_SS_PHY_STATS) {
1040		phydev = b53_get_phy_device(ds, port);
1041		if (!phydev)
1042			return 0;
1043
1044		return phy_ethtool_get_sset_count(phydev);
1045	}
1046
1047	return 0;
1048}
1049EXPORT_SYMBOL(b53_get_sset_count);
1050
1051enum b53_devlink_resource_id {
1052	B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1053};
1054
1055static u64 b53_devlink_vlan_table_get(void *priv)
1056{
1057	struct b53_device *dev = priv;
1058	struct b53_vlan *vl;
1059	unsigned int i;
1060	u64 count = 0;
1061
1062	for (i = 0; i < dev->num_vlans; i++) {
1063		vl = &dev->vlans[i];
1064		if (vl->members)
1065			count++;
1066	}
1067
1068	return count;
1069}
1070
1071int b53_setup_devlink_resources(struct dsa_switch *ds)
1072{
1073	struct devlink_resource_size_params size_params;
1074	struct b53_device *dev = ds->priv;
1075	int err;
1076
1077	devlink_resource_size_params_init(&size_params, dev->num_vlans,
1078					  dev->num_vlans,
1079					  1, DEVLINK_RESOURCE_UNIT_ENTRY);
1080
1081	err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans,
1082					    B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1083					    DEVLINK_RESOURCE_ID_PARENT_TOP,
1084					    &size_params);
1085	if (err)
1086		goto out;
1087
1088	dsa_devlink_resource_occ_get_register(ds,
1089					      B53_DEVLINK_PARAM_ID_VLAN_TABLE,
1090					      b53_devlink_vlan_table_get, dev);
1091
1092	return 0;
1093out:
1094	dsa_devlink_resources_unregister(ds);
1095	return err;
1096}
1097EXPORT_SYMBOL(b53_setup_devlink_resources);
1098
1099static int b53_setup(struct dsa_switch *ds)
1100{
1101	struct b53_device *dev = ds->priv;
1102	unsigned int port;
1103	int ret;
1104
1105	/* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
1106	 * which forces the CPU port to be tagged in all VLANs.
1107	 */
1108	ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
1109
1110	ret = b53_reset_switch(dev);
1111	if (ret) {
1112		dev_err(ds->dev, "failed to reset switch\n");
1113		return ret;
1114	}
1115
1116	b53_reset_mib(dev);
1117
1118	ret = b53_apply_config(dev);
1119	if (ret) {
1120		dev_err(ds->dev, "failed to apply configuration\n");
1121		return ret;
1122	}
1123
1124	/* Configure IMP/CPU port, disable all other ports. Enabled
1125	 * ports will be configured with .port_enable
1126	 */
1127	for (port = 0; port < dev->num_ports; port++) {
1128		if (dsa_is_cpu_port(ds, port))
1129			b53_enable_cpu_port(dev, port);
1130		else
1131			b53_disable_port(ds, port);
1132	}
1133
1134	return b53_setup_devlink_resources(ds);
1135}
1136
1137static void b53_teardown(struct dsa_switch *ds)
1138{
1139	dsa_devlink_resources_unregister(ds);
1140}
1141
1142static void b53_force_link(struct b53_device *dev, int port, int link)
1143{
1144	u8 reg, val, off;
1145
1146	/* Override the port settings */
1147	if (port == dev->imp_port) {
1148		off = B53_PORT_OVERRIDE_CTRL;
1149		val = PORT_OVERRIDE_EN;
1150	} else {
1151		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1152		val = GMII_PO_EN;
1153	}
1154
1155	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1156	reg |= val;
1157	if (link)
1158		reg |= PORT_OVERRIDE_LINK;
1159	else
1160		reg &= ~PORT_OVERRIDE_LINK;
1161	b53_write8(dev, B53_CTRL_PAGE, off, reg);
1162}
1163
1164static void b53_force_port_config(struct b53_device *dev, int port,
1165				  int speed, int duplex,
1166				  bool tx_pause, bool rx_pause)
1167{
1168	u8 reg, val, off;
1169
1170	/* Override the port settings */
1171	if (port == dev->imp_port) {
1172		off = B53_PORT_OVERRIDE_CTRL;
1173		val = PORT_OVERRIDE_EN;
1174	} else {
1175		off = B53_GMII_PORT_OVERRIDE_CTRL(port);
1176		val = GMII_PO_EN;
1177	}
1178
1179	b53_read8(dev, B53_CTRL_PAGE, off, &reg);
1180	reg |= val;
1181	if (duplex == DUPLEX_FULL)
1182		reg |= PORT_OVERRIDE_FULL_DUPLEX;
1183	else
1184		reg &= ~PORT_OVERRIDE_FULL_DUPLEX;
1185
1186	switch (speed) {
1187	case 2000:
1188		reg |= PORT_OVERRIDE_SPEED_2000M;
1189		fallthrough;
1190	case SPEED_1000:
1191		reg |= PORT_OVERRIDE_SPEED_1000M;
1192		break;
1193	case SPEED_100:
1194		reg |= PORT_OVERRIDE_SPEED_100M;
1195		break;
1196	case SPEED_10:
1197		reg |= PORT_OVERRIDE_SPEED_10M;
1198		break;
1199	default:
1200		dev_err(dev->dev, "unknown speed: %d\n", speed);
1201		return;
1202	}
1203
1204	if (rx_pause)
1205		reg |= PORT_OVERRIDE_RX_FLOW;
1206	if (tx_pause)
1207		reg |= PORT_OVERRIDE_TX_FLOW;
1208
1209	b53_write8(dev, B53_CTRL_PAGE, off, reg);
1210}
1211
1212static void b53_adjust_link(struct dsa_switch *ds, int port,
1213			    struct phy_device *phydev)
1214{
1215	struct b53_device *dev = ds->priv;
1216	struct ethtool_eee *p = &dev->ports[port].eee;
1217	u8 rgmii_ctrl = 0, reg = 0, off;
1218	bool tx_pause = false;
1219	bool rx_pause = false;
1220
1221	if (!phy_is_pseudo_fixed_link(phydev))
1222		return;
1223
1224	/* Enable flow control on BCM5301x's CPU port */
1225	if (is5301x(dev) && dsa_is_cpu_port(ds, port))
1226		tx_pause = rx_pause = true;
1227
1228	if (phydev->pause) {
1229		if (phydev->asym_pause)
1230			tx_pause = true;
1231		rx_pause = true;
1232	}
1233
1234	b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
1235			      tx_pause, rx_pause);
1236	b53_force_link(dev, port, phydev->link);
1237
1238	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
1239		if (port == dev->imp_port)
1240			off = B53_RGMII_CTRL_IMP;
1241		else
1242			off = B53_RGMII_CTRL_P(port);
1243
1244		/* Configure the port RGMII clock delay by DLL disabled and
1245		 * tx_clk aligned timing (restoring to reset defaults)
1246		 */
1247		b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
1248		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
1249				RGMII_CTRL_TIMING_SEL);
1250
1251		/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
1252		 * sure that we enable the port TX clock internal delay to
1253		 * account for this internal delay that is inserted, otherwise
1254		 * the switch won't be able to receive correctly.
1255		 *
1256		 * PHY_INTERFACE_MODE_RGMII means that we are not introducing
1257		 * any delay neither on transmission nor reception, so the
1258		 * BCM53125 must also be configured accordingly to account for
1259		 * the lack of delay and introduce
1260		 *
1261		 * The BCM53125 switch has its RX clock and TX clock control
1262		 * swapped, hence the reason why we modify the TX clock path in
1263		 * the "RGMII" case
1264		 */
1265		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1266			rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
1267		if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
1268			rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
1269		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
1270		b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
1271
1272		dev_info(ds->dev, "Configured port %d for %s\n", port,
1273			 phy_modes(phydev->interface));
1274	}
1275
1276	/* configure MII port if necessary */
1277	if (is5325(dev)) {
1278		b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1279			  &reg);
1280
1281		/* reverse mii needs to be enabled */
1282		if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1283			b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1284				   reg | PORT_OVERRIDE_RV_MII_25);
1285			b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
1286				  &reg);
1287
1288			if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
1289				dev_err(ds->dev,
1290					"Failed to enable reverse MII mode\n");
1291				return;
1292			}
1293		}
1294	}
1295
1296	/* Re-negotiate EEE if it was enabled already */
1297	p->eee_enabled = b53_eee_init(ds, port, phydev);
1298}
1299
1300void b53_port_event(struct dsa_switch *ds, int port)
1301{
1302	struct b53_device *dev = ds->priv;
1303	bool link;
1304	u16 sts;
1305
1306	b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts);
1307	link = !!(sts & BIT(port));
1308	dsa_port_phylink_mac_change(ds, port, link);
1309}
1310EXPORT_SYMBOL(b53_port_event);
1311
1312static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
1313				 struct phylink_config *config)
1314{
1315	struct b53_device *dev = ds->priv;
1316
1317	/* Internal ports need GMII for PHYLIB */
1318	__set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
1319
1320	/* These switches appear to support MII and RevMII too, but beyond
1321	 * this, the code gives very few clues. FIXME: We probably need more
1322	 * interface modes here.
1323	 *
1324	 * According to b53_srab_mux_init(), ports 3..5 can support:
1325	 *  SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting.
1326	 * However, the interface mode read from the MUX configuration is
1327	 * not passed back to DSA, so phylink uses NA.
1328	 * DT can specify RGMII for ports 0, 1.
1329	 * For MDIO, port 8 can be RGMII_TXID.
1330	 */
1331	__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1332	__set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
1333
1334	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
1335		MAC_10 | MAC_100;
1336
1337	/* 5325/5365 are not capable of gigabit speeds, everything else is.
1338	 * Note: the original code also exclulded Gigagbit for MII, RevMII
1339	 * and 802.3z modes. MII and RevMII are not able to work above 100M,
1340	 * so will be excluded by the generic validator implementation.
1341	 * However, the exclusion of Gigabit for 802.3z just seems wrong.
1342	 */
1343	if (!(is5325(dev) || is5365(dev)))
1344		config->mac_capabilities |= MAC_1000;
1345
1346	/* Get the implementation specific capabilities */
1347	if (dev->ops->phylink_get_caps)
1348		dev->ops->phylink_get_caps(dev, port, config);
1349
1350	/* This driver does not make use of the speed, duplex, pause or the
1351	 * advertisement in its mac_config, so it is safe to mark this driver
1352	 * as non-legacy.
1353	 */
1354	config->legacy_pre_march2020 = false;
1355}
1356
1357static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
1358						      int port,
1359						      phy_interface_t interface)
1360{
1361	struct b53_device *dev = ds->priv;
1362
1363	if (!dev->ops->phylink_mac_select_pcs)
1364		return NULL;
1365
1366	return dev->ops->phylink_mac_select_pcs(dev, port, interface);
1367}
1368
1369void b53_phylink_mac_config(struct dsa_switch *ds, int port,
1370			    unsigned int mode,
1371			    const struct phylink_link_state *state)
1372{
1373}
1374EXPORT_SYMBOL(b53_phylink_mac_config);
1375
1376void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
1377			       unsigned int mode,
1378			       phy_interface_t interface)
1379{
1380	struct b53_device *dev = ds->priv;
1381
1382	if (mode == MLO_AN_PHY)
1383		return;
1384
1385	if (mode == MLO_AN_FIXED) {
1386		b53_force_link(dev, port, false);
1387		return;
1388	}
1389
1390	if (phy_interface_mode_is_8023z(interface) &&
1391	    dev->ops->serdes_link_set)
1392		dev->ops->serdes_link_set(dev, port, mode, interface, false);
1393}
1394EXPORT_SYMBOL(b53_phylink_mac_link_down);
1395
1396void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
1397			     unsigned int mode,
1398			     phy_interface_t interface,
1399			     struct phy_device *phydev,
1400			     int speed, int duplex,
1401			     bool tx_pause, bool rx_pause)
1402{
1403	struct b53_device *dev = ds->priv;
1404
1405	if (mode == MLO_AN_PHY)
1406		return;
1407
1408	if (mode == MLO_AN_FIXED) {
1409		b53_force_port_config(dev, port, speed, duplex,
1410				      tx_pause, rx_pause);
1411		b53_force_link(dev, port, true);
1412		return;
1413	}
1414
1415	if (phy_interface_mode_is_8023z(interface) &&
1416	    dev->ops->serdes_link_set)
1417		dev->ops->serdes_link_set(dev, port, mode, interface, true);
1418}
1419EXPORT_SYMBOL(b53_phylink_mac_link_up);
1420
1421int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
1422		       struct netlink_ext_ack *extack)
1423{
1424	struct b53_device *dev = ds->priv;
1425
1426	b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
1427
1428	return 0;
1429}
1430EXPORT_SYMBOL(b53_vlan_filtering);
1431
1432static int b53_vlan_prepare(struct dsa_switch *ds, int port,
1433			    const struct switchdev_obj_port_vlan *vlan)
1434{
1435	struct b53_device *dev = ds->priv;
1436
1437	if ((is5325(dev) || is5365(dev)) && vlan->vid == 0)
1438		return -EOPNOTSUPP;
1439
1440	/* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of
1441	 * receiving VLAN tagged frames at all, we can still allow the port to
1442	 * be configured for egress untagged.
1443	 */
1444	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 &&
1445	    !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED))
1446		return -EINVAL;
1447
1448	if (vlan->vid >= dev->num_vlans)
1449		return -ERANGE;
1450
1451	b53_enable_vlan(dev, port, true, ds->vlan_filtering);
1452
1453	return 0;
1454}
1455
1456int b53_vlan_add(struct dsa_switch *ds, int port,
1457		 const struct switchdev_obj_port_vlan *vlan,
1458		 struct netlink_ext_ack *extack)
1459{
1460	struct b53_device *dev = ds->priv;
1461	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1462	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
1463	struct b53_vlan *vl;
1464	int err;
1465
1466	err = b53_vlan_prepare(ds, port, vlan);
1467	if (err)
1468		return err;
1469
1470	vl = &dev->vlans[vlan->vid];
1471
1472	b53_get_vlan_entry(dev, vlan->vid, vl);
1473
1474	if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev))
1475		untagged = true;
1476
1477	vl->members |= BIT(port);
1478	if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1479		vl->untag |= BIT(port);
1480	else
1481		vl->untag &= ~BIT(port);
1482
1483	b53_set_vlan_entry(dev, vlan->vid, vl);
1484	b53_fast_age_vlan(dev, vlan->vid);
1485
1486	if (pvid && !dsa_is_cpu_port(ds, port)) {
1487		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
1488			    vlan->vid);
1489		b53_fast_age_vlan(dev, vlan->vid);
1490	}
1491
1492	return 0;
1493}
1494EXPORT_SYMBOL(b53_vlan_add);
1495
1496int b53_vlan_del(struct dsa_switch *ds, int port,
1497		 const struct switchdev_obj_port_vlan *vlan)
1498{
1499	struct b53_device *dev = ds->priv;
1500	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
1501	struct b53_vlan *vl;
1502	u16 pvid;
1503
1504	b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
1505
1506	vl = &dev->vlans[vlan->vid];
1507
1508	b53_get_vlan_entry(dev, vlan->vid, vl);
1509
1510	vl->members &= ~BIT(port);
1511
1512	if (pvid == vlan->vid)
1513		pvid = b53_default_pvid(dev);
1514
1515	if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
1516		vl->untag &= ~(BIT(port));
1517
1518	b53_set_vlan_entry(dev, vlan->vid, vl);
1519	b53_fast_age_vlan(dev, vlan->vid);
1520
1521	b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid);
1522	b53_fast_age_vlan(dev, pvid);
1523
1524	return 0;
1525}
1526EXPORT_SYMBOL(b53_vlan_del);
1527
1528/* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */
1529static int b53_arl_op_wait(struct b53_device *dev)
1530{
1531	unsigned int timeout = 10;
1532	u8 reg;
1533
1534	do {
1535		b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1536		if (!(reg & ARLTBL_START_DONE))
1537			return 0;
1538
1539		usleep_range(1000, 2000);
1540	} while (timeout--);
1541
1542	dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg);
1543
1544	return -ETIMEDOUT;
1545}
1546
1547static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
1548{
1549	u8 reg;
1550
1551	if (op > ARLTBL_RW)
1552		return -EINVAL;
1553
1554	b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, &reg);
1555	reg |= ARLTBL_START_DONE;
1556	if (op)
1557		reg |= ARLTBL_RW;
1558	else
1559		reg &= ~ARLTBL_RW;
1560	if (dev->vlan_enabled)
1561		reg &= ~ARLTBL_IVL_SVL_SELECT;
1562	else
1563		reg |= ARLTBL_IVL_SVL_SELECT;
1564	b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg);
1565
1566	return b53_arl_op_wait(dev);
1567}
1568
1569static int b53_arl_read(struct b53_device *dev, u64 mac,
1570			u16 vid, struct b53_arl_entry *ent, u8 *idx)
1571{
1572	DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
1573	unsigned int i;
1574	int ret;
1575
1576	ret = b53_arl_op_wait(dev);
1577	if (ret)
1578		return ret;
1579
1580	bitmap_zero(free_bins, dev->num_arl_bins);
1581
1582	/* Read the bins */
1583	for (i = 0; i < dev->num_arl_bins; i++) {
1584		u64 mac_vid;
1585		u32 fwd_entry;
1586
1587		b53_read64(dev, B53_ARLIO_PAGE,
1588			   B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid);
1589		b53_read32(dev, B53_ARLIO_PAGE,
1590			   B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
1591		b53_arl_to_entry(ent, mac_vid, fwd_entry);
1592
1593		if (!(fwd_entry & ARLTBL_VALID)) {
1594			set_bit(i, free_bins);
1595			continue;
1596		}
1597		if ((mac_vid & ARLTBL_MAC_MASK) != mac)
1598			continue;
1599		if (dev->vlan_enabled &&
1600		    ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
1601			continue;
1602		*idx = i;
1603		return 0;
1604	}
1605
1606	*idx = find_first_bit(free_bins, dev->num_arl_bins);
1607	return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
1608}
1609
1610static int b53_arl_op(struct b53_device *dev, int op, int port,
1611		      const unsigned char *addr, u16 vid, bool is_valid)
1612{
1613	struct b53_arl_entry ent;
1614	u32 fwd_entry;
1615	u64 mac, mac_vid = 0;
1616	u8 idx = 0;
1617	int ret;
1618
1619	/* Convert the array into a 64-bit MAC */
1620	mac = ether_addr_to_u64(addr);
1621
1622	/* Perform a read for the given MAC and VID */
1623	b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac);
1624	b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid);
1625
1626	/* Issue a read operation for this MAC */
1627	ret = b53_arl_rw_op(dev, 1);
1628	if (ret)
1629		return ret;
1630
1631	ret = b53_arl_read(dev, mac, vid, &ent, &idx);
1632
1633	/* If this is a read, just finish now */
1634	if (op)
1635		return ret;
1636
1637	switch (ret) {
1638	case -ETIMEDOUT:
1639		return ret;
1640	case -ENOSPC:
1641		dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n",
1642			addr, vid);
1643		return is_valid ? ret : 0;
1644	case -ENOENT:
1645		/* We could not find a matching MAC, so reset to a new entry */
1646		dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n",
1647			addr, vid, idx);
1648		fwd_entry = 0;
1649		break;
1650	default:
1651		dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n",
1652			addr, vid, idx);
1653		break;
1654	}
1655
1656	/* For multicast address, the port is a bitmask and the validity
1657	 * is determined by having at least one port being still active
1658	 */
1659	if (!is_multicast_ether_addr(addr)) {
1660		ent.port = port;
1661		ent.is_valid = is_valid;
1662	} else {
1663		if (is_valid)
1664			ent.port |= BIT(port);
1665		else
1666			ent.port &= ~BIT(port);
1667
1668		ent.is_valid = !!(ent.port);
1669	}
1670
1671	ent.vid = vid;
1672	ent.is_static = true;
1673	ent.is_age = false;
1674	memcpy(ent.mac, addr, ETH_ALEN);
1675	b53_arl_from_entry(&mac_vid, &fwd_entry, &ent);
1676
1677	b53_write64(dev, B53_ARLIO_PAGE,
1678		    B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid);
1679	b53_write32(dev, B53_ARLIO_PAGE,
1680		    B53_ARLTBL_DATA_ENTRY(idx), fwd_entry);
1681
1682	return b53_arl_rw_op(dev, 0);
1683}
1684
1685int b53_fdb_add(struct dsa_switch *ds, int port,
1686		const unsigned char *addr, u16 vid,
1687		struct dsa_db db)
1688{
1689	struct b53_device *priv = ds->priv;
1690	int ret;
1691
1692	/* 5325 and 5365 require some more massaging, but could
1693	 * be supported eventually
1694	 */
1695	if (is5325(priv) || is5365(priv))
1696		return -EOPNOTSUPP;
1697
1698	mutex_lock(&priv->arl_mutex);
1699	ret = b53_arl_op(priv, 0, port, addr, vid, true);
1700	mutex_unlock(&priv->arl_mutex);
1701
1702	return ret;
1703}
1704EXPORT_SYMBOL(b53_fdb_add);
1705
1706int b53_fdb_del(struct dsa_switch *ds, int port,
1707		const unsigned char *addr, u16 vid,
1708		struct dsa_db db)
1709{
1710	struct b53_device *priv = ds->priv;
1711	int ret;
1712
1713	mutex_lock(&priv->arl_mutex);
1714	ret = b53_arl_op(priv, 0, port, addr, vid, false);
1715	mutex_unlock(&priv->arl_mutex);
1716
1717	return ret;
1718}
1719EXPORT_SYMBOL(b53_fdb_del);
1720
1721static int b53_arl_search_wait(struct b53_device *dev)
1722{
1723	unsigned int timeout = 1000;
1724	u8 reg;
1725
1726	do {
1727		b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, &reg);
1728		if (!(reg & ARL_SRCH_STDN))
1729			return 0;
1730
1731		if (reg & ARL_SRCH_VLID)
1732			return 0;
1733
1734		usleep_range(1000, 2000);
1735	} while (timeout--);
1736
1737	return -ETIMEDOUT;
1738}
1739
1740static void b53_arl_search_rd(struct b53_device *dev, u8 idx,
1741			      struct b53_arl_entry *ent)
1742{
1743	u64 mac_vid;
1744	u32 fwd_entry;
1745
1746	b53_read64(dev, B53_ARLIO_PAGE,
1747		   B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid);
1748	b53_read32(dev, B53_ARLIO_PAGE,
1749		   B53_ARL_SRCH_RSTL(idx), &fwd_entry);
1750	b53_arl_to_entry(ent, mac_vid, fwd_entry);
1751}
1752
1753static int b53_fdb_copy(int port, const struct b53_arl_entry *ent,
1754			dsa_fdb_dump_cb_t *cb, void *data)
1755{
1756	if (!ent->is_valid)
1757		return 0;
1758
1759	if (port != ent->port)
1760		return 0;
1761
1762	return cb(ent->mac, ent->vid, ent->is_static, data);
1763}
1764
1765int b53_fdb_dump(struct dsa_switch *ds, int port,
1766		 dsa_fdb_dump_cb_t *cb, void *data)
1767{
1768	struct b53_device *priv = ds->priv;
1769	struct b53_arl_entry results[2];
1770	unsigned int count = 0;
1771	int ret;
1772	u8 reg;
1773
1774	mutex_lock(&priv->arl_mutex);
1775
1776	/* Start search operation */
1777	reg = ARL_SRCH_STDN;
1778	b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg);
1779
1780	do {
1781		ret = b53_arl_search_wait(priv);
1782		if (ret)
1783			break;
1784
1785		b53_arl_search_rd(priv, 0, &results[0]);
1786		ret = b53_fdb_copy(port, &results[0], cb, data);
1787		if (ret)
1788			break;
1789
1790		if (priv->num_arl_bins > 2) {
1791			b53_arl_search_rd(priv, 1, &results[1]);
1792			ret = b53_fdb_copy(port, &results[1], cb, data);
1793			if (ret)
1794				break;
1795
1796			if (!results[0].is_valid && !results[1].is_valid)
1797				break;
1798		}
1799
1800	} while (count++ < b53_max_arl_entries(priv) / 2);
1801
1802	mutex_unlock(&priv->arl_mutex);
1803
1804	return 0;
1805}
1806EXPORT_SYMBOL(b53_fdb_dump);
1807
1808int b53_mdb_add(struct dsa_switch *ds, int port,
1809		const struct switchdev_obj_port_mdb *mdb,
1810		struct dsa_db db)
1811{
1812	struct b53_device *priv = ds->priv;
1813	int ret;
1814
1815	/* 5325 and 5365 require some more massaging, but could
1816	 * be supported eventually
1817	 */
1818	if (is5325(priv) || is5365(priv))
1819		return -EOPNOTSUPP;
1820
1821	mutex_lock(&priv->arl_mutex);
1822	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true);
1823	mutex_unlock(&priv->arl_mutex);
1824
1825	return ret;
1826}
1827EXPORT_SYMBOL(b53_mdb_add);
1828
1829int b53_mdb_del(struct dsa_switch *ds, int port,
1830		const struct switchdev_obj_port_mdb *mdb,
1831		struct dsa_db db)
1832{
1833	struct b53_device *priv = ds->priv;
1834	int ret;
1835
1836	mutex_lock(&priv->arl_mutex);
1837	ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false);
1838	mutex_unlock(&priv->arl_mutex);
1839	if (ret)
1840		dev_err(ds->dev, "failed to delete MDB entry\n");
1841
1842	return ret;
1843}
1844EXPORT_SYMBOL(b53_mdb_del);
1845
1846int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge,
1847		bool *tx_fwd_offload, struct netlink_ext_ack *extack)
1848{
1849	struct b53_device *dev = ds->priv;
1850	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1851	u16 pvlan, reg;
1852	unsigned int i;
1853
1854	/* On 7278, port 7 which connects to the ASP should only receive
1855	 * traffic from matching CFP rules.
1856	 */
1857	if (dev->chip_id == BCM7278_DEVICE_ID && port == 7)
1858		return -EINVAL;
1859
1860	/* Make this port leave the all VLANs join since we will have proper
1861	 * VLAN entries from now on
1862	 */
1863	if (is58xx(dev)) {
1864		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1865		reg &= ~BIT(port);
1866		if ((reg & BIT(cpu_port)) == BIT(cpu_port))
1867			reg &= ~BIT(cpu_port);
1868		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1869	}
1870
1871	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1872
1873	b53_for_each_port(dev, i) {
1874		if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1875			continue;
1876
1877		/* Add this local port to the remote port VLAN control
1878		 * membership and update the remote port bitmask
1879		 */
1880		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1881		reg |= BIT(port);
1882		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1883		dev->ports[i].vlan_ctl_mask = reg;
1884
1885		pvlan |= BIT(i);
1886	}
1887
1888	/* Configure the local port VLAN control membership to include
1889	 * remote ports and update the local port bitmask
1890	 */
1891	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1892	dev->ports[port].vlan_ctl_mask = pvlan;
1893
1894	return 0;
1895}
1896EXPORT_SYMBOL(b53_br_join);
1897
1898void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge)
1899{
1900	struct b53_device *dev = ds->priv;
1901	struct b53_vlan *vl = &dev->vlans[0];
1902	s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
1903	unsigned int i;
1904	u16 pvlan, reg, pvid;
1905
1906	b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan);
1907
1908	b53_for_each_port(dev, i) {
1909		/* Don't touch the remaining ports */
1910		if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
1911			continue;
1912
1913		b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &reg);
1914		reg &= ~BIT(port);
1915		b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg);
1916		dev->ports[port].vlan_ctl_mask = reg;
1917
1918		/* Prevent self removal to preserve isolation */
1919		if (port != i)
1920			pvlan &= ~BIT(i);
1921	}
1922
1923	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
1924	dev->ports[port].vlan_ctl_mask = pvlan;
1925
1926	pvid = b53_default_pvid(dev);
1927
1928	/* Make this port join all VLANs without VLAN entries */
1929	if (is58xx(dev)) {
1930		b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, &reg);
1931		reg |= BIT(port);
1932		if (!(reg & BIT(cpu_port)))
1933			reg |= BIT(cpu_port);
1934		b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg);
1935	} else {
1936		b53_get_vlan_entry(dev, pvid, vl);
1937		vl->members |= BIT(port) | BIT(cpu_port);
1938		vl->untag |= BIT(port) | BIT(cpu_port);
1939		b53_set_vlan_entry(dev, pvid, vl);
1940	}
1941}
1942EXPORT_SYMBOL(b53_br_leave);
1943
1944void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
1945{
1946	struct b53_device *dev = ds->priv;
1947	u8 hw_state;
1948	u8 reg;
1949
1950	switch (state) {
1951	case BR_STATE_DISABLED:
1952		hw_state = PORT_CTRL_DIS_STATE;
1953		break;
1954	case BR_STATE_LISTENING:
1955		hw_state = PORT_CTRL_LISTEN_STATE;
1956		break;
1957	case BR_STATE_LEARNING:
1958		hw_state = PORT_CTRL_LEARN_STATE;
1959		break;
1960	case BR_STATE_FORWARDING:
1961		hw_state = PORT_CTRL_FWD_STATE;
1962		break;
1963	case BR_STATE_BLOCKING:
1964		hw_state = PORT_CTRL_BLOCK_STATE;
1965		break;
1966	default:
1967		dev_err(ds->dev, "invalid STP state: %d\n", state);
1968		return;
1969	}
1970
1971	b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), &reg);
1972	reg &= ~PORT_CTRL_STP_STATE_MASK;
1973	reg |= hw_state;
1974	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
1975}
1976EXPORT_SYMBOL(b53_br_set_stp_state);
1977
1978void b53_br_fast_age(struct dsa_switch *ds, int port)
1979{
1980	struct b53_device *dev = ds->priv;
1981
1982	if (b53_fast_age_port(dev, port))
1983		dev_err(ds->dev, "fast ageing failed\n");
1984}
1985EXPORT_SYMBOL(b53_br_fast_age);
1986
1987int b53_br_flags_pre(struct dsa_switch *ds, int port,
1988		     struct switchdev_brport_flags flags,
1989		     struct netlink_ext_ack *extack)
1990{
1991	if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING))
1992		return -EINVAL;
1993
1994	return 0;
1995}
1996EXPORT_SYMBOL(b53_br_flags_pre);
1997
1998int b53_br_flags(struct dsa_switch *ds, int port,
1999		 struct switchdev_brport_flags flags,
2000		 struct netlink_ext_ack *extack)
2001{
2002	if (flags.mask & BR_FLOOD)
2003		b53_port_set_ucast_flood(ds->priv, port,
2004					 !!(flags.val & BR_FLOOD));
2005	if (flags.mask & BR_MCAST_FLOOD)
2006		b53_port_set_mcast_flood(ds->priv, port,
2007					 !!(flags.val & BR_MCAST_FLOOD));
2008	if (flags.mask & BR_LEARNING)
2009		b53_port_set_learning(ds->priv, port,
2010				      !!(flags.val & BR_LEARNING));
2011
2012	return 0;
2013}
2014EXPORT_SYMBOL(b53_br_flags);
2015
2016static bool b53_possible_cpu_port(struct dsa_switch *ds, int port)
2017{
2018	/* Broadcom switches will accept enabling Broadcom tags on the
2019	 * following ports: 5, 7 and 8, any other port is not supported
2020	 */
2021	switch (port) {
2022	case B53_CPU_PORT_25:
2023	case 7:
2024	case B53_CPU_PORT:
2025		return true;
2026	}
2027
2028	return false;
2029}
2030
2031static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port,
2032				     enum dsa_tag_protocol tag_protocol)
2033{
2034	bool ret = b53_possible_cpu_port(ds, port);
2035
2036	if (!ret) {
2037		dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n",
2038			 port);
2039		return ret;
2040	}
2041
2042	switch (tag_protocol) {
2043	case DSA_TAG_PROTO_BRCM:
2044	case DSA_TAG_PROTO_BRCM_PREPEND:
2045		dev_warn(ds->dev,
2046			 "Port %d is stacked to Broadcom tag switch\n", port);
2047		ret = false;
2048		break;
2049	default:
2050		ret = true;
2051		break;
2052	}
2053
2054	return ret;
2055}
2056
2057enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port,
2058					   enum dsa_tag_protocol mprot)
2059{
2060	struct b53_device *dev = ds->priv;
2061
2062	if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
2063		dev->tag_protocol = DSA_TAG_PROTO_NONE;
2064		goto out;
2065	}
2066
2067	/* Older models require a different 6 byte tag */
2068	if (is5325(dev) || is5365(dev) || is63xx(dev)) {
2069		dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
2070		goto out;
2071	}
2072
2073	/* Broadcom BCM58xx chips have a flow accelerator on Port 8
2074	 * which requires us to use the prepended Broadcom tag type
2075	 */
2076	if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) {
2077		dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND;
2078		goto out;
2079	}
2080
2081	dev->tag_protocol = DSA_TAG_PROTO_BRCM;
2082out:
2083	return dev->tag_protocol;
2084}
2085EXPORT_SYMBOL(b53_get_tag_protocol);
2086
2087int b53_mirror_add(struct dsa_switch *ds, int port,
2088		   struct dsa_mall_mirror_tc_entry *mirror, bool ingress,
2089		   struct netlink_ext_ack *extack)
2090{
2091	struct b53_device *dev = ds->priv;
2092	u16 reg, loc;
2093
2094	if (ingress)
2095		loc = B53_IG_MIR_CTL;
2096	else
2097		loc = B53_EG_MIR_CTL;
2098
2099	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2100	reg |= BIT(port);
2101	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2102
2103	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2104	reg &= ~CAP_PORT_MASK;
2105	reg |= mirror->to_local_port;
2106	reg |= MIRROR_EN;
2107	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2108
2109	return 0;
2110}
2111EXPORT_SYMBOL(b53_mirror_add);
2112
2113void b53_mirror_del(struct dsa_switch *ds, int port,
2114		    struct dsa_mall_mirror_tc_entry *mirror)
2115{
2116	struct b53_device *dev = ds->priv;
2117	bool loc_disable = false, other_loc_disable = false;
2118	u16 reg, loc;
2119
2120	if (mirror->ingress)
2121		loc = B53_IG_MIR_CTL;
2122	else
2123		loc = B53_EG_MIR_CTL;
2124
2125	/* Update the desired ingress/egress register */
2126	b53_read16(dev, B53_MGMT_PAGE, loc, &reg);
2127	reg &= ~BIT(port);
2128	if (!(reg & MIRROR_MASK))
2129		loc_disable = true;
2130	b53_write16(dev, B53_MGMT_PAGE, loc, reg);
2131
2132	/* Now look at the other one to know if we can disable mirroring
2133	 * entirely
2134	 */
2135	if (mirror->ingress)
2136		b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, &reg);
2137	else
2138		b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, &reg);
2139	if (!(reg & MIRROR_MASK))
2140		other_loc_disable = true;
2141
2142	b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, &reg);
2143	/* Both no longer have ports, let's disable mirroring */
2144	if (loc_disable && other_loc_disable) {
2145		reg &= ~MIRROR_EN;
2146		reg &= ~mirror->to_local_port;
2147	}
2148	b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg);
2149}
2150EXPORT_SYMBOL(b53_mirror_del);
2151
2152void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
2153{
2154	struct b53_device *dev = ds->priv;
2155	u16 reg;
2156
2157	b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, &reg);
2158	if (enable)
2159		reg |= BIT(port);
2160	else
2161		reg &= ~BIT(port);
2162	b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
2163}
2164EXPORT_SYMBOL(b53_eee_enable_set);
2165
2166
2167/* Returns 0 if EEE was not enabled, or 1 otherwise
2168 */
2169int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
2170{
2171	int ret;
2172
2173	ret = phy_init_eee(phy, false);
2174	if (ret)
2175		return 0;
2176
2177	b53_eee_enable_set(ds, port, true);
2178
2179	return 1;
2180}
2181EXPORT_SYMBOL(b53_eee_init);
2182
2183int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2184{
2185	struct b53_device *dev = ds->priv;
2186	struct ethtool_eee *p = &dev->ports[port].eee;
2187	u16 reg;
2188
2189	if (is5325(dev) || is5365(dev))
2190		return -EOPNOTSUPP;
2191
2192	b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, &reg);
2193	e->eee_enabled = p->eee_enabled;
2194	e->eee_active = !!(reg & BIT(port));
2195
2196	return 0;
2197}
2198EXPORT_SYMBOL(b53_get_mac_eee);
2199
2200int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
2201{
2202	struct b53_device *dev = ds->priv;
2203	struct ethtool_eee *p = &dev->ports[port].eee;
2204
2205	if (is5325(dev) || is5365(dev))
2206		return -EOPNOTSUPP;
2207
2208	p->eee_enabled = e->eee_enabled;
2209	b53_eee_enable_set(ds, port, e->eee_enabled);
2210
2211	return 0;
2212}
2213EXPORT_SYMBOL(b53_set_mac_eee);
2214
2215static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
2216{
2217	struct b53_device *dev = ds->priv;
2218	bool enable_jumbo;
2219	bool allow_10_100;
2220
2221	if (is5325(dev) || is5365(dev))
2222		return -EOPNOTSUPP;
2223
2224	enable_jumbo = (mtu >= JMS_MIN_SIZE);
2225	allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
2226
2227	return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
2228}
2229
2230static int b53_get_max_mtu(struct dsa_switch *ds, int port)
2231{
2232	return JMS_MAX_SIZE;
2233}
2234
2235static const struct dsa_switch_ops b53_switch_ops = {
2236	.get_tag_protocol	= b53_get_tag_protocol,
2237	.setup			= b53_setup,
2238	.teardown		= b53_teardown,
2239	.get_strings		= b53_get_strings,
2240	.get_ethtool_stats	= b53_get_ethtool_stats,
2241	.get_sset_count		= b53_get_sset_count,
2242	.get_ethtool_phy_stats	= b53_get_ethtool_phy_stats,
2243	.phy_read		= b53_phy_read16,
2244	.phy_write		= b53_phy_write16,
2245	.adjust_link		= b53_adjust_link,
2246	.phylink_get_caps	= b53_phylink_get_caps,
2247	.phylink_mac_select_pcs	= b53_phylink_mac_select_pcs,
2248	.phylink_mac_config	= b53_phylink_mac_config,
2249	.phylink_mac_link_down	= b53_phylink_mac_link_down,
2250	.phylink_mac_link_up	= b53_phylink_mac_link_up,
2251	.port_enable		= b53_enable_port,
2252	.port_disable		= b53_disable_port,
2253	.get_mac_eee		= b53_get_mac_eee,
2254	.set_mac_eee		= b53_set_mac_eee,
2255	.port_bridge_join	= b53_br_join,
2256	.port_bridge_leave	= b53_br_leave,
2257	.port_pre_bridge_flags	= b53_br_flags_pre,
2258	.port_bridge_flags	= b53_br_flags,
2259	.port_stp_state_set	= b53_br_set_stp_state,
2260	.port_fast_age		= b53_br_fast_age,
2261	.port_vlan_filtering	= b53_vlan_filtering,
2262	.port_vlan_add		= b53_vlan_add,
2263	.port_vlan_del		= b53_vlan_del,
2264	.port_fdb_dump		= b53_fdb_dump,
2265	.port_fdb_add		= b53_fdb_add,
2266	.port_fdb_del		= b53_fdb_del,
2267	.port_mirror_add	= b53_mirror_add,
2268	.port_mirror_del	= b53_mirror_del,
2269	.port_mdb_add		= b53_mdb_add,
2270	.port_mdb_del		= b53_mdb_del,
2271	.port_max_mtu		= b53_get_max_mtu,
2272	.port_change_mtu	= b53_change_mtu,
2273};
2274
2275struct b53_chip_data {
2276	u32 chip_id;
2277	const char *dev_name;
2278	u16 vlans;
2279	u16 enabled_ports;
2280	u8 imp_port;
2281	u8 cpu_port;
2282	u8 vta_regs[3];
2283	u8 arl_bins;
2284	u16 arl_buckets;
2285	u8 duplex_reg;
2286	u8 jumbo_pm_reg;
2287	u8 jumbo_size_reg;
2288};
2289
2290#define B53_VTA_REGS	\
2291	{ B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY }
2292#define B53_VTA_REGS_9798 \
2293	{ B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 }
2294#define B53_VTA_REGS_63XX \
2295	{ B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX }
2296
2297static const struct b53_chip_data b53_switch_chips[] = {
2298	{
2299		.chip_id = BCM5325_DEVICE_ID,
2300		.dev_name = "BCM5325",
2301		.vlans = 16,
2302		.enabled_ports = 0x3f,
2303		.arl_bins = 2,
2304		.arl_buckets = 1024,
2305		.imp_port = 5,
2306		.duplex_reg = B53_DUPLEX_STAT_FE,
2307	},
2308	{
2309		.chip_id = BCM5365_DEVICE_ID,
2310		.dev_name = "BCM5365",
2311		.vlans = 256,
2312		.enabled_ports = 0x3f,
2313		.arl_bins = 2,
2314		.arl_buckets = 1024,
2315		.imp_port = 5,
2316		.duplex_reg = B53_DUPLEX_STAT_FE,
2317	},
2318	{
2319		.chip_id = BCM5389_DEVICE_ID,
2320		.dev_name = "BCM5389",
2321		.vlans = 4096,
2322		.enabled_ports = 0x11f,
2323		.arl_bins = 4,
2324		.arl_buckets = 1024,
2325		.imp_port = 8,
2326		.vta_regs = B53_VTA_REGS,
2327		.duplex_reg = B53_DUPLEX_STAT_GE,
2328		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2329		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2330	},
2331	{
2332		.chip_id = BCM5395_DEVICE_ID,
2333		.dev_name = "BCM5395",
2334		.vlans = 4096,
2335		.enabled_ports = 0x11f,
2336		.arl_bins = 4,
2337		.arl_buckets = 1024,
2338		.imp_port = 8,
2339		.vta_regs = B53_VTA_REGS,
2340		.duplex_reg = B53_DUPLEX_STAT_GE,
2341		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2342		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2343	},
2344	{
2345		.chip_id = BCM5397_DEVICE_ID,
2346		.dev_name = "BCM5397",
2347		.vlans = 4096,
2348		.enabled_ports = 0x11f,
2349		.arl_bins = 4,
2350		.arl_buckets = 1024,
2351		.imp_port = 8,
2352		.vta_regs = B53_VTA_REGS_9798,
2353		.duplex_reg = B53_DUPLEX_STAT_GE,
2354		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2355		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2356	},
2357	{
2358		.chip_id = BCM5398_DEVICE_ID,
2359		.dev_name = "BCM5398",
2360		.vlans = 4096,
2361		.enabled_ports = 0x17f,
2362		.arl_bins = 4,
2363		.arl_buckets = 1024,
2364		.imp_port = 8,
2365		.vta_regs = B53_VTA_REGS_9798,
2366		.duplex_reg = B53_DUPLEX_STAT_GE,
2367		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2368		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2369	},
2370	{
2371		.chip_id = BCM53115_DEVICE_ID,
2372		.dev_name = "BCM53115",
2373		.vlans = 4096,
2374		.enabled_ports = 0x11f,
2375		.arl_bins = 4,
2376		.arl_buckets = 1024,
2377		.vta_regs = B53_VTA_REGS,
2378		.imp_port = 8,
2379		.duplex_reg = B53_DUPLEX_STAT_GE,
2380		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2381		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2382	},
2383	{
2384		.chip_id = BCM53125_DEVICE_ID,
2385		.dev_name = "BCM53125",
2386		.vlans = 4096,
2387		.enabled_ports = 0x1ff,
2388		.arl_bins = 4,
2389		.arl_buckets = 1024,
2390		.imp_port = 8,
2391		.vta_regs = B53_VTA_REGS,
2392		.duplex_reg = B53_DUPLEX_STAT_GE,
2393		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2394		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2395	},
2396	{
2397		.chip_id = BCM53128_DEVICE_ID,
2398		.dev_name = "BCM53128",
2399		.vlans = 4096,
2400		.enabled_ports = 0x1ff,
2401		.arl_bins = 4,
2402		.arl_buckets = 1024,
2403		.imp_port = 8,
2404		.vta_regs = B53_VTA_REGS,
2405		.duplex_reg = B53_DUPLEX_STAT_GE,
2406		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2407		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2408	},
2409	{
2410		.chip_id = BCM63XX_DEVICE_ID,
2411		.dev_name = "BCM63xx",
2412		.vlans = 4096,
2413		.enabled_ports = 0, /* pdata must provide them */
2414		.arl_bins = 4,
2415		.arl_buckets = 1024,
2416		.imp_port = 8,
2417		.vta_regs = B53_VTA_REGS_63XX,
2418		.duplex_reg = B53_DUPLEX_STAT_63XX,
2419		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
2420		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
2421	},
2422	{
2423		.chip_id = BCM53010_DEVICE_ID,
2424		.dev_name = "BCM53010",
2425		.vlans = 4096,
2426		.enabled_ports = 0x1bf,
2427		.arl_bins = 4,
2428		.arl_buckets = 1024,
2429		.imp_port = 8,
2430		.vta_regs = B53_VTA_REGS,
2431		.duplex_reg = B53_DUPLEX_STAT_GE,
2432		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2433		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2434	},
2435	{
2436		.chip_id = BCM53011_DEVICE_ID,
2437		.dev_name = "BCM53011",
2438		.vlans = 4096,
2439		.enabled_ports = 0x1bf,
2440		.arl_bins = 4,
2441		.arl_buckets = 1024,
2442		.imp_port = 8,
2443		.vta_regs = B53_VTA_REGS,
2444		.duplex_reg = B53_DUPLEX_STAT_GE,
2445		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2446		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2447	},
2448	{
2449		.chip_id = BCM53012_DEVICE_ID,
2450		.dev_name = "BCM53012",
2451		.vlans = 4096,
2452		.enabled_ports = 0x1bf,
2453		.arl_bins = 4,
2454		.arl_buckets = 1024,
2455		.imp_port = 8,
2456		.vta_regs = B53_VTA_REGS,
2457		.duplex_reg = B53_DUPLEX_STAT_GE,
2458		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2459		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2460	},
2461	{
2462		.chip_id = BCM53018_DEVICE_ID,
2463		.dev_name = "BCM53018",
2464		.vlans = 4096,
2465		.enabled_ports = 0x1bf,
2466		.arl_bins = 4,
2467		.arl_buckets = 1024,
2468		.imp_port = 8,
2469		.vta_regs = B53_VTA_REGS,
2470		.duplex_reg = B53_DUPLEX_STAT_GE,
2471		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2472		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2473	},
2474	{
2475		.chip_id = BCM53019_DEVICE_ID,
2476		.dev_name = "BCM53019",
2477		.vlans = 4096,
2478		.enabled_ports = 0x1bf,
2479		.arl_bins = 4,
2480		.arl_buckets = 1024,
2481		.imp_port = 8,
2482		.vta_regs = B53_VTA_REGS,
2483		.duplex_reg = B53_DUPLEX_STAT_GE,
2484		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2485		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2486	},
2487	{
2488		.chip_id = BCM58XX_DEVICE_ID,
2489		.dev_name = "BCM585xx/586xx/88312",
2490		.vlans	= 4096,
2491		.enabled_ports = 0x1ff,
2492		.arl_bins = 4,
2493		.arl_buckets = 1024,
2494		.imp_port = 8,
2495		.vta_regs = B53_VTA_REGS,
2496		.duplex_reg = B53_DUPLEX_STAT_GE,
2497		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2498		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2499	},
2500	{
2501		.chip_id = BCM583XX_DEVICE_ID,
2502		.dev_name = "BCM583xx/11360",
2503		.vlans = 4096,
2504		.enabled_ports = 0x103,
2505		.arl_bins = 4,
2506		.arl_buckets = 1024,
2507		.imp_port = 8,
2508		.vta_regs = B53_VTA_REGS,
2509		.duplex_reg = B53_DUPLEX_STAT_GE,
2510		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2511		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2512	},
2513	/* Starfighter 2 */
2514	{
2515		.chip_id = BCM4908_DEVICE_ID,
2516		.dev_name = "BCM4908",
2517		.vlans = 4096,
2518		.enabled_ports = 0x1bf,
2519		.arl_bins = 4,
2520		.arl_buckets = 256,
2521		.imp_port = 8,
2522		.vta_regs = B53_VTA_REGS,
2523		.duplex_reg = B53_DUPLEX_STAT_GE,
2524		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2525		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2526	},
2527	{
2528		.chip_id = BCM7445_DEVICE_ID,
2529		.dev_name = "BCM7445",
2530		.vlans	= 4096,
2531		.enabled_ports = 0x1ff,
2532		.arl_bins = 4,
2533		.arl_buckets = 1024,
2534		.imp_port = 8,
2535		.vta_regs = B53_VTA_REGS,
2536		.duplex_reg = B53_DUPLEX_STAT_GE,
2537		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2538		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2539	},
2540	{
2541		.chip_id = BCM7278_DEVICE_ID,
2542		.dev_name = "BCM7278",
2543		.vlans = 4096,
2544		.enabled_ports = 0x1ff,
2545		.arl_bins = 4,
2546		.arl_buckets = 256,
2547		.imp_port = 8,
2548		.vta_regs = B53_VTA_REGS,
2549		.duplex_reg = B53_DUPLEX_STAT_GE,
2550		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
2551		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
2552	},
2553};
2554
2555static int b53_switch_init(struct b53_device *dev)
2556{
2557	unsigned int i;
2558	int ret;
2559
2560	for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) {
2561		const struct b53_chip_data *chip = &b53_switch_chips[i];
2562
2563		if (chip->chip_id == dev->chip_id) {
2564			if (!dev->enabled_ports)
2565				dev->enabled_ports = chip->enabled_ports;
2566			dev->name = chip->dev_name;
2567			dev->duplex_reg = chip->duplex_reg;
2568			dev->vta_regs[0] = chip->vta_regs[0];
2569			dev->vta_regs[1] = chip->vta_regs[1];
2570			dev->vta_regs[2] = chip->vta_regs[2];
2571			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
2572			dev->imp_port = chip->imp_port;
2573			dev->num_vlans = chip->vlans;
2574			dev->num_arl_bins = chip->arl_bins;
2575			dev->num_arl_buckets = chip->arl_buckets;
2576			break;
2577		}
2578	}
2579
2580	/* check which BCM5325x version we have */
2581	if (is5325(dev)) {
2582		u8 vc4;
2583
2584		b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4);
2585
2586		/* check reserved bits */
2587		switch (vc4 & 3) {
2588		case 1:
2589			/* BCM5325E */
2590			break;
2591		case 3:
2592			/* BCM5325F - do not use port 4 */
2593			dev->enabled_ports &= ~BIT(4);
2594			break;
2595		default:
2596/* On the BCM47XX SoCs this is the supported internal switch.*/
2597#ifndef CONFIG_BCM47XX
2598			/* BCM5325M */
2599			return -EINVAL;
2600#else
2601			break;
2602#endif
2603		}
2604	}
2605
2606	dev->num_ports = fls(dev->enabled_ports);
2607
2608	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
2609
2610	/* Include non standard CPU port built-in PHYs to be probed */
2611	if (is539x(dev) || is531x5(dev)) {
2612		for (i = 0; i < dev->num_ports; i++) {
2613			if (!(dev->ds->phys_mii_mask & BIT(i)) &&
2614			    !b53_possible_cpu_port(dev->ds, i))
2615				dev->ds->phys_mii_mask |= BIT(i);
2616		}
2617	}
2618
2619	dev->ports = devm_kcalloc(dev->dev,
2620				  dev->num_ports, sizeof(struct b53_port),
2621				  GFP_KERNEL);
2622	if (!dev->ports)
2623		return -ENOMEM;
2624
2625	dev->vlans = devm_kcalloc(dev->dev,
2626				  dev->num_vlans, sizeof(struct b53_vlan),
2627				  GFP_KERNEL);
2628	if (!dev->vlans)
2629		return -ENOMEM;
2630
2631	dev->reset_gpio = b53_switch_get_reset_gpio(dev);
2632	if (dev->reset_gpio >= 0) {
2633		ret = devm_gpio_request_one(dev->dev, dev->reset_gpio,
2634					    GPIOF_OUT_INIT_HIGH, "robo_reset");
2635		if (ret)
2636			return ret;
2637	}
2638
2639	return 0;
2640}
2641
2642struct b53_device *b53_switch_alloc(struct device *base,
2643				    const struct b53_io_ops *ops,
2644				    void *priv)
2645{
2646	struct dsa_switch *ds;
2647	struct b53_device *dev;
2648
2649	ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
2650	if (!ds)
2651		return NULL;
2652
2653	ds->dev = base;
2654
2655	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
2656	if (!dev)
2657		return NULL;
2658
2659	ds->priv = dev;
2660	dev->dev = base;
2661
2662	dev->ds = ds;
2663	dev->priv = priv;
2664	dev->ops = ops;
2665	ds->ops = &b53_switch_ops;
2666	dev->vlan_enabled = true;
2667	/* Let DSA handle the case were multiple bridges span the same switch
2668	 * device and different VLAN awareness settings are requested, which
2669	 * would be breaking filtering semantics for any of the other bridge
2670	 * devices. (not hardware supported)
2671	 */
2672	ds->vlan_filtering_is_global = true;
2673
2674	mutex_init(&dev->reg_mutex);
2675	mutex_init(&dev->stats_mutex);
2676	mutex_init(&dev->arl_mutex);
2677
2678	return dev;
2679}
2680EXPORT_SYMBOL(b53_switch_alloc);
2681
2682int b53_switch_detect(struct b53_device *dev)
2683{
2684	u32 id32;
2685	u16 tmp;
2686	u8 id8;
2687	int ret;
2688
2689	ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8);
2690	if (ret)
2691		return ret;
2692
2693	switch (id8) {
2694	case 0:
2695		/* BCM5325 and BCM5365 do not have this register so reads
2696		 * return 0. But the read operation did succeed, so assume this
2697		 * is one of them.
2698		 *
2699		 * Next check if we can write to the 5325's VTA register; for
2700		 * 5365 it is read only.
2701		 */
2702		b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf);
2703		b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp);
2704
2705		if (tmp == 0xf)
2706			dev->chip_id = BCM5325_DEVICE_ID;
2707		else
2708			dev->chip_id = BCM5365_DEVICE_ID;
2709		break;
2710	case BCM5389_DEVICE_ID:
2711	case BCM5395_DEVICE_ID:
2712	case BCM5397_DEVICE_ID:
2713	case BCM5398_DEVICE_ID:
2714		dev->chip_id = id8;
2715		break;
2716	default:
2717		ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32);
2718		if (ret)
2719			return ret;
2720
2721		switch (id32) {
2722		case BCM53115_DEVICE_ID:
2723		case BCM53125_DEVICE_ID:
2724		case BCM53128_DEVICE_ID:
2725		case BCM53010_DEVICE_ID:
2726		case BCM53011_DEVICE_ID:
2727		case BCM53012_DEVICE_ID:
2728		case BCM53018_DEVICE_ID:
2729		case BCM53019_DEVICE_ID:
2730			dev->chip_id = id32;
2731			break;
2732		default:
2733			dev_err(dev->dev,
2734				"unsupported switch detected (BCM53%02x/BCM%x)\n",
2735				id8, id32);
2736			return -ENODEV;
2737		}
2738	}
2739
2740	if (dev->chip_id == BCM5325_DEVICE_ID)
2741		return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25,
2742				 &dev->core_rev);
2743	else
2744		return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID,
2745				 &dev->core_rev);
2746}
2747EXPORT_SYMBOL(b53_switch_detect);
2748
2749int b53_switch_register(struct b53_device *dev)
2750{
2751	int ret;
2752
2753	if (dev->pdata) {
2754		dev->chip_id = dev->pdata->chip_id;
2755		dev->enabled_ports = dev->pdata->enabled_ports;
2756	}
2757
2758	if (!dev->chip_id && b53_switch_detect(dev))
2759		return -EINVAL;
2760
2761	ret = b53_switch_init(dev);
2762	if (ret)
2763		return ret;
2764
2765	dev_info(dev->dev, "found switch: %s, rev %i\n",
2766		 dev->name, dev->core_rev);
2767
2768	return dsa_register_switch(dev->ds);
2769}
2770EXPORT_SYMBOL(b53_switch_register);
2771
2772MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
2773MODULE_DESCRIPTION("B53 switch library");
2774MODULE_LICENSE("Dual BSD/GPL");