Loading...
1/*
2 * sd.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4 *
5 * Linux scsi disk driver
6 * Initial versions: Drew Eckhardt
7 * Subsequent revisions: Eric Youngdale
8 * Modification history:
9 * - Drew Eckhardt <drew@colorado.edu> original
10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11 * outstanding request, and other enhancements.
12 * Support loadable low-level scsi drivers.
13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14 * eight major numbers.
15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17 * sd_init and cleanups.
18 * - Alex Davis <letmein@erols.com> Fix problem where partition info
19 * not being read in sd_open. Fix problem where removable media
20 * could be ejected after sd_open.
21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24 * Support 32k/1M disks.
25 *
26 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30 * - entering other commands: SCSI_LOG_HLQUEUE level 3
31 * Note: when the logging level is set by the user, it must be greater
32 * than the level indicated above to trigger output.
33 */
34
35#include <linux/module.h>
36#include <linux/fs.h>
37#include <linux/kernel.h>
38#include <linux/mm.h>
39#include <linux/bio.h>
40#include <linux/genhd.h>
41#include <linux/hdreg.h>
42#include <linux/errno.h>
43#include <linux/idr.h>
44#include <linux/interrupt.h>
45#include <linux/init.h>
46#include <linux/blkdev.h>
47#include <linux/blkpg.h>
48#include <linux/delay.h>
49#include <linux/mutex.h>
50#include <linux/string_helpers.h>
51#include <linux/async.h>
52#include <linux/slab.h>
53#include <asm/uaccess.h>
54#include <asm/unaligned.h>
55
56#include <scsi/scsi.h>
57#include <scsi/scsi_cmnd.h>
58#include <scsi/scsi_dbg.h>
59#include <scsi/scsi_device.h>
60#include <scsi/scsi_driver.h>
61#include <scsi/scsi_eh.h>
62#include <scsi/scsi_host.h>
63#include <scsi/scsi_ioctl.h>
64#include <scsi/scsicam.h>
65
66#include "sd.h"
67#include "scsi_logging.h"
68
69MODULE_AUTHOR("Eric Youngdale");
70MODULE_DESCRIPTION("SCSI disk (sd) driver");
71MODULE_LICENSE("GPL");
72
73MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
74MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
75MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
76MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
77MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
78MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
79MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
80MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
81MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
82MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
83MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
84MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
85MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
86MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
87MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
88MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
89MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
90MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
91MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
92
93#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
94#define SD_MINORS 16
95#else
96#define SD_MINORS 0
97#endif
98
99static void sd_config_discard(struct scsi_disk *, unsigned int);
100static int sd_revalidate_disk(struct gendisk *);
101static void sd_unlock_native_capacity(struct gendisk *disk);
102static int sd_probe(struct device *);
103static int sd_remove(struct device *);
104static void sd_shutdown(struct device *);
105static int sd_suspend(struct device *, pm_message_t state);
106static int sd_resume(struct device *);
107static void sd_rescan(struct device *);
108static int sd_done(struct scsi_cmnd *);
109static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
110static void scsi_disk_release(struct device *cdev);
111static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
112static void sd_print_result(struct scsi_disk *, int);
113
114static DEFINE_SPINLOCK(sd_index_lock);
115static DEFINE_IDA(sd_index_ida);
116
117/* This semaphore is used to mediate the 0->1 reference get in the
118 * face of object destruction (i.e. we can't allow a get on an
119 * object after last put) */
120static DEFINE_MUTEX(sd_ref_mutex);
121
122static struct kmem_cache *sd_cdb_cache;
123static mempool_t *sd_cdb_pool;
124
125static const char *sd_cache_types[] = {
126 "write through", "none", "write back",
127 "write back, no read (daft)"
128};
129
130static ssize_t
131sd_store_cache_type(struct device *dev, struct device_attribute *attr,
132 const char *buf, size_t count)
133{
134 int i, ct = -1, rcd, wce, sp;
135 struct scsi_disk *sdkp = to_scsi_disk(dev);
136 struct scsi_device *sdp = sdkp->device;
137 char buffer[64];
138 char *buffer_data;
139 struct scsi_mode_data data;
140 struct scsi_sense_hdr sshdr;
141 int len;
142
143 if (sdp->type != TYPE_DISK)
144 /* no cache control on RBC devices; theoretically they
145 * can do it, but there's probably so many exceptions
146 * it's not worth the risk */
147 return -EINVAL;
148
149 for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
150 len = strlen(sd_cache_types[i]);
151 if (strncmp(sd_cache_types[i], buf, len) == 0 &&
152 buf[len] == '\n') {
153 ct = i;
154 break;
155 }
156 }
157 if (ct < 0)
158 return -EINVAL;
159 rcd = ct & 0x01 ? 1 : 0;
160 wce = ct & 0x02 ? 1 : 0;
161 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
162 SD_MAX_RETRIES, &data, NULL))
163 return -EINVAL;
164 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
165 data.block_descriptor_length);
166 buffer_data = buffer + data.header_length +
167 data.block_descriptor_length;
168 buffer_data[2] &= ~0x05;
169 buffer_data[2] |= wce << 2 | rcd;
170 sp = buffer_data[0] & 0x80 ? 1 : 0;
171
172 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
173 SD_MAX_RETRIES, &data, &sshdr)) {
174 if (scsi_sense_valid(&sshdr))
175 sd_print_sense_hdr(sdkp, &sshdr);
176 return -EINVAL;
177 }
178 revalidate_disk(sdkp->disk);
179 return count;
180}
181
182static ssize_t
183sd_store_manage_start_stop(struct device *dev, struct device_attribute *attr,
184 const char *buf, size_t count)
185{
186 struct scsi_disk *sdkp = to_scsi_disk(dev);
187 struct scsi_device *sdp = sdkp->device;
188
189 if (!capable(CAP_SYS_ADMIN))
190 return -EACCES;
191
192 sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
193
194 return count;
195}
196
197static ssize_t
198sd_store_allow_restart(struct device *dev, struct device_attribute *attr,
199 const char *buf, size_t count)
200{
201 struct scsi_disk *sdkp = to_scsi_disk(dev);
202 struct scsi_device *sdp = sdkp->device;
203
204 if (!capable(CAP_SYS_ADMIN))
205 return -EACCES;
206
207 if (sdp->type != TYPE_DISK)
208 return -EINVAL;
209
210 sdp->allow_restart = simple_strtoul(buf, NULL, 10);
211
212 return count;
213}
214
215static ssize_t
216sd_show_cache_type(struct device *dev, struct device_attribute *attr,
217 char *buf)
218{
219 struct scsi_disk *sdkp = to_scsi_disk(dev);
220 int ct = sdkp->RCD + 2*sdkp->WCE;
221
222 return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
223}
224
225static ssize_t
226sd_show_fua(struct device *dev, struct device_attribute *attr, char *buf)
227{
228 struct scsi_disk *sdkp = to_scsi_disk(dev);
229
230 return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
231}
232
233static ssize_t
234sd_show_manage_start_stop(struct device *dev, struct device_attribute *attr,
235 char *buf)
236{
237 struct scsi_disk *sdkp = to_scsi_disk(dev);
238 struct scsi_device *sdp = sdkp->device;
239
240 return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
241}
242
243static ssize_t
244sd_show_allow_restart(struct device *dev, struct device_attribute *attr,
245 char *buf)
246{
247 struct scsi_disk *sdkp = to_scsi_disk(dev);
248
249 return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
250}
251
252static ssize_t
253sd_show_protection_type(struct device *dev, struct device_attribute *attr,
254 char *buf)
255{
256 struct scsi_disk *sdkp = to_scsi_disk(dev);
257
258 return snprintf(buf, 20, "%u\n", sdkp->protection_type);
259}
260
261static ssize_t
262sd_show_protection_mode(struct device *dev, struct device_attribute *attr,
263 char *buf)
264{
265 struct scsi_disk *sdkp = to_scsi_disk(dev);
266 struct scsi_device *sdp = sdkp->device;
267 unsigned int dif, dix;
268
269 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
270 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
271
272 if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) {
273 dif = 0;
274 dix = 1;
275 }
276
277 if (!dif && !dix)
278 return snprintf(buf, 20, "none\n");
279
280 return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
281}
282
283static ssize_t
284sd_show_app_tag_own(struct device *dev, struct device_attribute *attr,
285 char *buf)
286{
287 struct scsi_disk *sdkp = to_scsi_disk(dev);
288
289 return snprintf(buf, 20, "%u\n", sdkp->ATO);
290}
291
292static ssize_t
293sd_show_thin_provisioning(struct device *dev, struct device_attribute *attr,
294 char *buf)
295{
296 struct scsi_disk *sdkp = to_scsi_disk(dev);
297
298 return snprintf(buf, 20, "%u\n", sdkp->lbpme);
299}
300
301static const char *lbp_mode[] = {
302 [SD_LBP_FULL] = "full",
303 [SD_LBP_UNMAP] = "unmap",
304 [SD_LBP_WS16] = "writesame_16",
305 [SD_LBP_WS10] = "writesame_10",
306 [SD_LBP_ZERO] = "writesame_zero",
307 [SD_LBP_DISABLE] = "disabled",
308};
309
310static ssize_t
311sd_show_provisioning_mode(struct device *dev, struct device_attribute *attr,
312 char *buf)
313{
314 struct scsi_disk *sdkp = to_scsi_disk(dev);
315
316 return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
317}
318
319static ssize_t
320sd_store_provisioning_mode(struct device *dev, struct device_attribute *attr,
321 const char *buf, size_t count)
322{
323 struct scsi_disk *sdkp = to_scsi_disk(dev);
324 struct scsi_device *sdp = sdkp->device;
325
326 if (!capable(CAP_SYS_ADMIN))
327 return -EACCES;
328
329 if (sdp->type != TYPE_DISK)
330 return -EINVAL;
331
332 if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
333 sd_config_discard(sdkp, SD_LBP_UNMAP);
334 else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
335 sd_config_discard(sdkp, SD_LBP_WS16);
336 else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
337 sd_config_discard(sdkp, SD_LBP_WS10);
338 else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
339 sd_config_discard(sdkp, SD_LBP_ZERO);
340 else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
341 sd_config_discard(sdkp, SD_LBP_DISABLE);
342 else
343 return -EINVAL;
344
345 return count;
346}
347
348static struct device_attribute sd_disk_attrs[] = {
349 __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
350 sd_store_cache_type),
351 __ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
352 __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
353 sd_store_allow_restart),
354 __ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
355 sd_store_manage_start_stop),
356 __ATTR(protection_type, S_IRUGO, sd_show_protection_type, NULL),
357 __ATTR(protection_mode, S_IRUGO, sd_show_protection_mode, NULL),
358 __ATTR(app_tag_own, S_IRUGO, sd_show_app_tag_own, NULL),
359 __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
360 __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
361 sd_store_provisioning_mode),
362 __ATTR_NULL,
363};
364
365static struct class sd_disk_class = {
366 .name = "scsi_disk",
367 .owner = THIS_MODULE,
368 .dev_release = scsi_disk_release,
369 .dev_attrs = sd_disk_attrs,
370};
371
372static struct scsi_driver sd_template = {
373 .owner = THIS_MODULE,
374 .gendrv = {
375 .name = "sd",
376 .probe = sd_probe,
377 .remove = sd_remove,
378 .suspend = sd_suspend,
379 .resume = sd_resume,
380 .shutdown = sd_shutdown,
381 },
382 .rescan = sd_rescan,
383 .done = sd_done,
384};
385
386/*
387 * Device no to disk mapping:
388 *
389 * major disc2 disc p1
390 * |............|.............|....|....| <- dev_t
391 * 31 20 19 8 7 4 3 0
392 *
393 * Inside a major, we have 16k disks, however mapped non-
394 * contiguously. The first 16 disks are for major0, the next
395 * ones with major1, ... Disk 256 is for major0 again, disk 272
396 * for major1, ...
397 * As we stay compatible with our numbering scheme, we can reuse
398 * the well-know SCSI majors 8, 65--71, 136--143.
399 */
400static int sd_major(int major_idx)
401{
402 switch (major_idx) {
403 case 0:
404 return SCSI_DISK0_MAJOR;
405 case 1 ... 7:
406 return SCSI_DISK1_MAJOR + major_idx - 1;
407 case 8 ... 15:
408 return SCSI_DISK8_MAJOR + major_idx - 8;
409 default:
410 BUG();
411 return 0; /* shut up gcc */
412 }
413}
414
415static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
416{
417 struct scsi_disk *sdkp = NULL;
418
419 if (disk->private_data) {
420 sdkp = scsi_disk(disk);
421 if (scsi_device_get(sdkp->device) == 0)
422 get_device(&sdkp->dev);
423 else
424 sdkp = NULL;
425 }
426 return sdkp;
427}
428
429static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
430{
431 struct scsi_disk *sdkp;
432
433 mutex_lock(&sd_ref_mutex);
434 sdkp = __scsi_disk_get(disk);
435 mutex_unlock(&sd_ref_mutex);
436 return sdkp;
437}
438
439static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
440{
441 struct scsi_disk *sdkp;
442
443 mutex_lock(&sd_ref_mutex);
444 sdkp = dev_get_drvdata(dev);
445 if (sdkp)
446 sdkp = __scsi_disk_get(sdkp->disk);
447 mutex_unlock(&sd_ref_mutex);
448 return sdkp;
449}
450
451static void scsi_disk_put(struct scsi_disk *sdkp)
452{
453 struct scsi_device *sdev = sdkp->device;
454
455 mutex_lock(&sd_ref_mutex);
456 put_device(&sdkp->dev);
457 scsi_device_put(sdev);
458 mutex_unlock(&sd_ref_mutex);
459}
460
461static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
462{
463 unsigned int prot_op = SCSI_PROT_NORMAL;
464 unsigned int dix = scsi_prot_sg_count(scmd);
465
466 if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
467 if (dif && dix)
468 prot_op = SCSI_PROT_READ_PASS;
469 else if (dif && !dix)
470 prot_op = SCSI_PROT_READ_STRIP;
471 else if (!dif && dix)
472 prot_op = SCSI_PROT_READ_INSERT;
473 } else {
474 if (dif && dix)
475 prot_op = SCSI_PROT_WRITE_PASS;
476 else if (dif && !dix)
477 prot_op = SCSI_PROT_WRITE_INSERT;
478 else if (!dif && dix)
479 prot_op = SCSI_PROT_WRITE_STRIP;
480 }
481
482 scsi_set_prot_op(scmd, prot_op);
483 scsi_set_prot_type(scmd, dif);
484}
485
486static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
487{
488 struct request_queue *q = sdkp->disk->queue;
489 unsigned int logical_block_size = sdkp->device->sector_size;
490 unsigned int max_blocks = 0;
491
492 q->limits.discard_zeroes_data = sdkp->lbprz;
493 q->limits.discard_alignment = sdkp->unmap_alignment *
494 logical_block_size;
495 q->limits.discard_granularity =
496 max(sdkp->physical_block_size,
497 sdkp->unmap_granularity * logical_block_size);
498
499 switch (mode) {
500
501 case SD_LBP_DISABLE:
502 q->limits.max_discard_sectors = 0;
503 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
504 return;
505
506 case SD_LBP_UNMAP:
507 max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff);
508 break;
509
510 case SD_LBP_WS16:
511 max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff);
512 break;
513
514 case SD_LBP_WS10:
515 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
516 break;
517
518 case SD_LBP_ZERO:
519 max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
520 q->limits.discard_zeroes_data = 1;
521 break;
522 }
523
524 q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9);
525 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
526
527 sdkp->provisioning_mode = mode;
528}
529
530/**
531 * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
532 * @sdp: scsi device to operate one
533 * @rq: Request to prepare
534 *
535 * Will issue either UNMAP or WRITE SAME(16) depending on preference
536 * indicated by target device.
537 **/
538static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
539{
540 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
541 struct bio *bio = rq->bio;
542 sector_t sector = bio->bi_sector;
543 unsigned int nr_sectors = bio_sectors(bio);
544 unsigned int len;
545 int ret;
546 char *buf;
547 struct page *page;
548
549 if (sdkp->device->sector_size == 4096) {
550 sector >>= 3;
551 nr_sectors >>= 3;
552 }
553
554 rq->timeout = SD_TIMEOUT;
555
556 memset(rq->cmd, 0, rq->cmd_len);
557
558 page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
559 if (!page)
560 return BLKPREP_DEFER;
561
562 switch (sdkp->provisioning_mode) {
563 case SD_LBP_UNMAP:
564 buf = page_address(page);
565
566 rq->cmd_len = 10;
567 rq->cmd[0] = UNMAP;
568 rq->cmd[8] = 24;
569
570 put_unaligned_be16(6 + 16, &buf[0]);
571 put_unaligned_be16(16, &buf[2]);
572 put_unaligned_be64(sector, &buf[8]);
573 put_unaligned_be32(nr_sectors, &buf[16]);
574
575 len = 24;
576 break;
577
578 case SD_LBP_WS16:
579 rq->cmd_len = 16;
580 rq->cmd[0] = WRITE_SAME_16;
581 rq->cmd[1] = 0x8; /* UNMAP */
582 put_unaligned_be64(sector, &rq->cmd[2]);
583 put_unaligned_be32(nr_sectors, &rq->cmd[10]);
584
585 len = sdkp->device->sector_size;
586 break;
587
588 case SD_LBP_WS10:
589 case SD_LBP_ZERO:
590 rq->cmd_len = 10;
591 rq->cmd[0] = WRITE_SAME;
592 if (sdkp->provisioning_mode == SD_LBP_WS10)
593 rq->cmd[1] = 0x8; /* UNMAP */
594 put_unaligned_be32(sector, &rq->cmd[2]);
595 put_unaligned_be16(nr_sectors, &rq->cmd[7]);
596
597 len = sdkp->device->sector_size;
598 break;
599
600 default:
601 ret = BLKPREP_KILL;
602 goto out;
603 }
604
605 blk_add_request_payload(rq, page, len);
606 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
607 rq->buffer = page_address(page);
608
609out:
610 if (ret != BLKPREP_OK) {
611 __free_page(page);
612 rq->buffer = NULL;
613 }
614 return ret;
615}
616
617static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
618{
619 rq->timeout = SD_FLUSH_TIMEOUT;
620 rq->retries = SD_MAX_RETRIES;
621 rq->cmd[0] = SYNCHRONIZE_CACHE;
622 rq->cmd_len = 10;
623
624 return scsi_setup_blk_pc_cmnd(sdp, rq);
625}
626
627static void sd_unprep_fn(struct request_queue *q, struct request *rq)
628{
629 if (rq->cmd_flags & REQ_DISCARD) {
630 free_page((unsigned long)rq->buffer);
631 rq->buffer = NULL;
632 }
633}
634
635/**
636 * sd_init_command - build a scsi (read or write) command from
637 * information in the request structure.
638 * @SCpnt: pointer to mid-level's per scsi command structure that
639 * contains request and into which the scsi command is written
640 *
641 * Returns 1 if successful and 0 if error (or cannot be done now).
642 **/
643static int sd_prep_fn(struct request_queue *q, struct request *rq)
644{
645 struct scsi_cmnd *SCpnt;
646 struct scsi_device *sdp = q->queuedata;
647 struct gendisk *disk = rq->rq_disk;
648 struct scsi_disk *sdkp;
649 sector_t block = blk_rq_pos(rq);
650 sector_t threshold;
651 unsigned int this_count = blk_rq_sectors(rq);
652 int ret, host_dif;
653 unsigned char protect;
654
655 /*
656 * Discard request come in as REQ_TYPE_FS but we turn them into
657 * block PC requests to make life easier.
658 */
659 if (rq->cmd_flags & REQ_DISCARD) {
660 ret = scsi_setup_discard_cmnd(sdp, rq);
661 goto out;
662 } else if (rq->cmd_flags & REQ_FLUSH) {
663 ret = scsi_setup_flush_cmnd(sdp, rq);
664 goto out;
665 } else if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
666 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
667 goto out;
668 } else if (rq->cmd_type != REQ_TYPE_FS) {
669 ret = BLKPREP_KILL;
670 goto out;
671 }
672 ret = scsi_setup_fs_cmnd(sdp, rq);
673 if (ret != BLKPREP_OK)
674 goto out;
675 SCpnt = rq->special;
676 sdkp = scsi_disk(disk);
677
678 /* from here on until we're complete, any goto out
679 * is used for a killable error condition */
680 ret = BLKPREP_KILL;
681
682 SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
683 "sd_init_command: block=%llu, "
684 "count=%d\n",
685 (unsigned long long)block,
686 this_count));
687
688 if (!sdp || !scsi_device_online(sdp) ||
689 block + blk_rq_sectors(rq) > get_capacity(disk)) {
690 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
691 "Finishing %u sectors\n",
692 blk_rq_sectors(rq)));
693 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
694 "Retry with 0x%p\n", SCpnt));
695 goto out;
696 }
697
698 if (sdp->changed) {
699 /*
700 * quietly refuse to do anything to a changed disc until
701 * the changed bit has been reset
702 */
703 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
704 goto out;
705 }
706
707 /*
708 * Some SD card readers can't handle multi-sector accesses which touch
709 * the last one or two hardware sectors. Split accesses as needed.
710 */
711 threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
712 (sdp->sector_size / 512);
713
714 if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
715 if (block < threshold) {
716 /* Access up to the threshold but not beyond */
717 this_count = threshold - block;
718 } else {
719 /* Access only a single hardware sector */
720 this_count = sdp->sector_size / 512;
721 }
722 }
723
724 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
725 (unsigned long long)block));
726
727 /*
728 * If we have a 1K hardware sectorsize, prevent access to single
729 * 512 byte sectors. In theory we could handle this - in fact
730 * the scsi cdrom driver must be able to handle this because
731 * we typically use 1K blocksizes, and cdroms typically have
732 * 2K hardware sectorsizes. Of course, things are simpler
733 * with the cdrom, since it is read-only. For performance
734 * reasons, the filesystems should be able to handle this
735 * and not force the scsi disk driver to use bounce buffers
736 * for this.
737 */
738 if (sdp->sector_size == 1024) {
739 if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
740 scmd_printk(KERN_ERR, SCpnt,
741 "Bad block number requested\n");
742 goto out;
743 } else {
744 block = block >> 1;
745 this_count = this_count >> 1;
746 }
747 }
748 if (sdp->sector_size == 2048) {
749 if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
750 scmd_printk(KERN_ERR, SCpnt,
751 "Bad block number requested\n");
752 goto out;
753 } else {
754 block = block >> 2;
755 this_count = this_count >> 2;
756 }
757 }
758 if (sdp->sector_size == 4096) {
759 if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
760 scmd_printk(KERN_ERR, SCpnt,
761 "Bad block number requested\n");
762 goto out;
763 } else {
764 block = block >> 3;
765 this_count = this_count >> 3;
766 }
767 }
768 if (rq_data_dir(rq) == WRITE) {
769 if (!sdp->writeable) {
770 goto out;
771 }
772 SCpnt->cmnd[0] = WRITE_6;
773 SCpnt->sc_data_direction = DMA_TO_DEVICE;
774
775 if (blk_integrity_rq(rq) &&
776 sd_dif_prepare(rq, block, sdp->sector_size) == -EIO)
777 goto out;
778
779 } else if (rq_data_dir(rq) == READ) {
780 SCpnt->cmnd[0] = READ_6;
781 SCpnt->sc_data_direction = DMA_FROM_DEVICE;
782 } else {
783 scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
784 goto out;
785 }
786
787 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
788 "%s %d/%u 512 byte blocks.\n",
789 (rq_data_dir(rq) == WRITE) ?
790 "writing" : "reading", this_count,
791 blk_rq_sectors(rq)));
792
793 /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
794 host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
795 if (host_dif)
796 protect = 1 << 5;
797 else
798 protect = 0;
799
800 if (host_dif == SD_DIF_TYPE2_PROTECTION) {
801 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
802
803 if (unlikely(SCpnt->cmnd == NULL)) {
804 ret = BLKPREP_DEFER;
805 goto out;
806 }
807
808 SCpnt->cmd_len = SD_EXT_CDB_SIZE;
809 memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
810 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
811 SCpnt->cmnd[7] = 0x18;
812 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
813 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
814
815 /* LBA */
816 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
817 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
818 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
819 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
820 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
821 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
822 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
823 SCpnt->cmnd[19] = (unsigned char) block & 0xff;
824
825 /* Expected Indirect LBA */
826 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
827 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
828 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
829 SCpnt->cmnd[23] = (unsigned char) block & 0xff;
830
831 /* Transfer length */
832 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
833 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
834 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
835 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
836 } else if (block > 0xffffffff) {
837 SCpnt->cmnd[0] += READ_16 - READ_6;
838 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
839 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
840 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
841 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
842 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
843 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
844 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
845 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
846 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
847 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
848 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
849 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
850 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
851 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
852 } else if ((this_count > 0xff) || (block > 0x1fffff) ||
853 scsi_device_protection(SCpnt->device) ||
854 SCpnt->device->use_10_for_rw) {
855 if (this_count > 0xffff)
856 this_count = 0xffff;
857
858 SCpnt->cmnd[0] += READ_10 - READ_6;
859 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
860 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
861 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
862 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
863 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
864 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
865 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
866 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
867 } else {
868 if (unlikely(rq->cmd_flags & REQ_FUA)) {
869 /*
870 * This happens only if this drive failed
871 * 10byte rw command with ILLEGAL_REQUEST
872 * during operation and thus turned off
873 * use_10_for_rw.
874 */
875 scmd_printk(KERN_ERR, SCpnt,
876 "FUA write on READ/WRITE(6) drive\n");
877 goto out;
878 }
879
880 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
881 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
882 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
883 SCpnt->cmnd[4] = (unsigned char) this_count;
884 SCpnt->cmnd[5] = 0;
885 }
886 SCpnt->sdb.length = this_count * sdp->sector_size;
887
888 /* If DIF or DIX is enabled, tell HBA how to handle request */
889 if (host_dif || scsi_prot_sg_count(SCpnt))
890 sd_prot_op(SCpnt, host_dif);
891
892 /*
893 * We shouldn't disconnect in the middle of a sector, so with a dumb
894 * host adapter, it's safe to assume that we can at least transfer
895 * this many bytes between each connect / disconnect.
896 */
897 SCpnt->transfersize = sdp->sector_size;
898 SCpnt->underflow = this_count << 9;
899 SCpnt->allowed = SD_MAX_RETRIES;
900
901 /*
902 * This indicates that the command is ready from our end to be
903 * queued.
904 */
905 ret = BLKPREP_OK;
906 out:
907 return scsi_prep_return(q, rq, ret);
908}
909
910/**
911 * sd_open - open a scsi disk device
912 * @inode: only i_rdev member may be used
913 * @filp: only f_mode and f_flags may be used
914 *
915 * Returns 0 if successful. Returns a negated errno value in case
916 * of error.
917 *
918 * Note: This can be called from a user context (e.g. fsck(1) )
919 * or from within the kernel (e.g. as a result of a mount(1) ).
920 * In the latter case @inode and @filp carry an abridged amount
921 * of information as noted above.
922 *
923 * Locking: called with bdev->bd_mutex held.
924 **/
925static int sd_open(struct block_device *bdev, fmode_t mode)
926{
927 struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
928 struct scsi_device *sdev;
929 int retval;
930
931 if (!sdkp)
932 return -ENXIO;
933
934 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
935
936 sdev = sdkp->device;
937
938 retval = scsi_autopm_get_device(sdev);
939 if (retval)
940 goto error_autopm;
941
942 /*
943 * If the device is in error recovery, wait until it is done.
944 * If the device is offline, then disallow any access to it.
945 */
946 retval = -ENXIO;
947 if (!scsi_block_when_processing_errors(sdev))
948 goto error_out;
949
950 if (sdev->removable || sdkp->write_prot)
951 check_disk_change(bdev);
952
953 /*
954 * If the drive is empty, just let the open fail.
955 */
956 retval = -ENOMEDIUM;
957 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
958 goto error_out;
959
960 /*
961 * If the device has the write protect tab set, have the open fail
962 * if the user expects to be able to write to the thing.
963 */
964 retval = -EROFS;
965 if (sdkp->write_prot && (mode & FMODE_WRITE))
966 goto error_out;
967
968 /*
969 * It is possible that the disk changing stuff resulted in
970 * the device being taken offline. If this is the case,
971 * report this to the user, and don't pretend that the
972 * open actually succeeded.
973 */
974 retval = -ENXIO;
975 if (!scsi_device_online(sdev))
976 goto error_out;
977
978 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
979 if (scsi_block_when_processing_errors(sdev))
980 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
981 }
982
983 return 0;
984
985error_out:
986 scsi_autopm_put_device(sdev);
987error_autopm:
988 scsi_disk_put(sdkp);
989 return retval;
990}
991
992/**
993 * sd_release - invoked when the (last) close(2) is called on this
994 * scsi disk.
995 * @inode: only i_rdev member may be used
996 * @filp: only f_mode and f_flags may be used
997 *
998 * Returns 0.
999 *
1000 * Note: may block (uninterruptible) if error recovery is underway
1001 * on this disk.
1002 *
1003 * Locking: called with bdev->bd_mutex held.
1004 **/
1005static int sd_release(struct gendisk *disk, fmode_t mode)
1006{
1007 struct scsi_disk *sdkp = scsi_disk(disk);
1008 struct scsi_device *sdev = sdkp->device;
1009
1010 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1011
1012 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1013 if (scsi_block_when_processing_errors(sdev))
1014 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1015 }
1016
1017 /*
1018 * XXX and what if there are packets in flight and this close()
1019 * XXX is followed by a "rmmod sd_mod"?
1020 */
1021
1022 scsi_autopm_put_device(sdev);
1023 scsi_disk_put(sdkp);
1024 return 0;
1025}
1026
1027static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1028{
1029 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1030 struct scsi_device *sdp = sdkp->device;
1031 struct Scsi_Host *host = sdp->host;
1032 int diskinfo[4];
1033
1034 /* default to most commonly used values */
1035 diskinfo[0] = 0x40; /* 1 << 6 */
1036 diskinfo[1] = 0x20; /* 1 << 5 */
1037 diskinfo[2] = sdkp->capacity >> 11;
1038
1039 /* override with calculated, extended default, or driver values */
1040 if (host->hostt->bios_param)
1041 host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
1042 else
1043 scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
1044
1045 geo->heads = diskinfo[0];
1046 geo->sectors = diskinfo[1];
1047 geo->cylinders = diskinfo[2];
1048 return 0;
1049}
1050
1051/**
1052 * sd_ioctl - process an ioctl
1053 * @inode: only i_rdev/i_bdev members may be used
1054 * @filp: only f_mode and f_flags may be used
1055 * @cmd: ioctl command number
1056 * @arg: this is third argument given to ioctl(2) system call.
1057 * Often contains a pointer.
1058 *
1059 * Returns 0 if successful (some ioctls return positive numbers on
1060 * success as well). Returns a negated errno value in case of error.
1061 *
1062 * Note: most ioctls are forward onto the block subsystem or further
1063 * down in the scsi subsystem.
1064 **/
1065static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1066 unsigned int cmd, unsigned long arg)
1067{
1068 struct gendisk *disk = bdev->bd_disk;
1069 struct scsi_device *sdp = scsi_disk(disk)->device;
1070 void __user *p = (void __user *)arg;
1071 int error;
1072
1073 SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
1074 disk->disk_name, cmd));
1075
1076 /*
1077 * If we are in the middle of error recovery, don't let anyone
1078 * else try and use this device. Also, if error recovery fails, it
1079 * may try and take the device offline, in which case all further
1080 * access to the device is prohibited.
1081 */
1082 error = scsi_nonblockable_ioctl(sdp, cmd, p,
1083 (mode & FMODE_NDELAY) != 0);
1084 if (!scsi_block_when_processing_errors(sdp) || !error)
1085 goto out;
1086
1087 /*
1088 * Send SCSI addressing ioctls directly to mid level, send other
1089 * ioctls to block level and then onto mid level if they can't be
1090 * resolved.
1091 */
1092 switch (cmd) {
1093 case SCSI_IOCTL_GET_IDLUN:
1094 case SCSI_IOCTL_GET_BUS_NUMBER:
1095 error = scsi_ioctl(sdp, cmd, p);
1096 break;
1097 default:
1098 error = scsi_cmd_ioctl(disk->queue, disk, mode, cmd, p);
1099 if (error != -ENOTTY)
1100 break;
1101 error = scsi_ioctl(sdp, cmd, p);
1102 break;
1103 }
1104out:
1105 return error;
1106}
1107
1108static void set_media_not_present(struct scsi_disk *sdkp)
1109{
1110 if (sdkp->media_present)
1111 sdkp->device->changed = 1;
1112
1113 if (sdkp->device->removable) {
1114 sdkp->media_present = 0;
1115 sdkp->capacity = 0;
1116 }
1117}
1118
1119static int media_not_present(struct scsi_disk *sdkp,
1120 struct scsi_sense_hdr *sshdr)
1121{
1122 if (!scsi_sense_valid(sshdr))
1123 return 0;
1124
1125 /* not invoked for commands that could return deferred errors */
1126 switch (sshdr->sense_key) {
1127 case UNIT_ATTENTION:
1128 case NOT_READY:
1129 /* medium not present */
1130 if (sshdr->asc == 0x3A) {
1131 set_media_not_present(sdkp);
1132 return 1;
1133 }
1134 }
1135 return 0;
1136}
1137
1138/**
1139 * sd_check_events - check media events
1140 * @disk: kernel device descriptor
1141 * @clearing: disk events currently being cleared
1142 *
1143 * Returns mask of DISK_EVENT_*.
1144 *
1145 * Note: this function is invoked from the block subsystem.
1146 **/
1147static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1148{
1149 struct scsi_disk *sdkp = scsi_disk(disk);
1150 struct scsi_device *sdp = sdkp->device;
1151 struct scsi_sense_hdr *sshdr = NULL;
1152 int retval;
1153
1154 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1155
1156 /*
1157 * If the device is offline, don't send any commands - just pretend as
1158 * if the command failed. If the device ever comes back online, we
1159 * can deal with it then. It is only because of unrecoverable errors
1160 * that we would ever take a device offline in the first place.
1161 */
1162 if (!scsi_device_online(sdp)) {
1163 set_media_not_present(sdkp);
1164 goto out;
1165 }
1166
1167 /*
1168 * Using TEST_UNIT_READY enables differentiation between drive with
1169 * no cartridge loaded - NOT READY, drive with changed cartridge -
1170 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1171 *
1172 * Drives that auto spin down. eg iomega jaz 1G, will be started
1173 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1174 * sd_revalidate() is called.
1175 */
1176 retval = -ENODEV;
1177
1178 if (scsi_block_when_processing_errors(sdp)) {
1179 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1180 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1181 sshdr);
1182 }
1183
1184 /* failed to execute TUR, assume media not present */
1185 if (host_byte(retval)) {
1186 set_media_not_present(sdkp);
1187 goto out;
1188 }
1189
1190 if (media_not_present(sdkp, sshdr))
1191 goto out;
1192
1193 /*
1194 * For removable scsi disk we have to recognise the presence
1195 * of a disk in the drive.
1196 */
1197 if (!sdkp->media_present)
1198 sdp->changed = 1;
1199 sdkp->media_present = 1;
1200out:
1201 /*
1202 * sdp->changed is set under the following conditions:
1203 *
1204 * Medium present state has changed in either direction.
1205 * Device has indicated UNIT_ATTENTION.
1206 */
1207 kfree(sshdr);
1208 retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1209 sdp->changed = 0;
1210 return retval;
1211}
1212
1213static int sd_sync_cache(struct scsi_disk *sdkp)
1214{
1215 int retries, res;
1216 struct scsi_device *sdp = sdkp->device;
1217 struct scsi_sense_hdr sshdr;
1218
1219 if (!scsi_device_online(sdp))
1220 return -ENODEV;
1221
1222
1223 for (retries = 3; retries > 0; --retries) {
1224 unsigned char cmd[10] = { 0 };
1225
1226 cmd[0] = SYNCHRONIZE_CACHE;
1227 /*
1228 * Leave the rest of the command zero to indicate
1229 * flush everything.
1230 */
1231 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
1232 SD_FLUSH_TIMEOUT, SD_MAX_RETRIES, NULL);
1233 if (res == 0)
1234 break;
1235 }
1236
1237 if (res) {
1238 sd_print_result(sdkp, res);
1239 if (driver_byte(res) & DRIVER_SENSE)
1240 sd_print_sense_hdr(sdkp, &sshdr);
1241 }
1242
1243 if (res)
1244 return -EIO;
1245 return 0;
1246}
1247
1248static void sd_rescan(struct device *dev)
1249{
1250 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
1251
1252 if (sdkp) {
1253 revalidate_disk(sdkp->disk);
1254 scsi_disk_put(sdkp);
1255 }
1256}
1257
1258
1259#ifdef CONFIG_COMPAT
1260/*
1261 * This gets directly called from VFS. When the ioctl
1262 * is not recognized we go back to the other translation paths.
1263 */
1264static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1265 unsigned int cmd, unsigned long arg)
1266{
1267 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1268
1269 /*
1270 * If we are in the middle of error recovery, don't let anyone
1271 * else try and use this device. Also, if error recovery fails, it
1272 * may try and take the device offline, in which case all further
1273 * access to the device is prohibited.
1274 */
1275 if (!scsi_block_when_processing_errors(sdev))
1276 return -ENODEV;
1277
1278 if (sdev->host->hostt->compat_ioctl) {
1279 int ret;
1280
1281 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1282
1283 return ret;
1284 }
1285
1286 /*
1287 * Let the static ioctl translation table take care of it.
1288 */
1289 return -ENOIOCTLCMD;
1290}
1291#endif
1292
1293static const struct block_device_operations sd_fops = {
1294 .owner = THIS_MODULE,
1295 .open = sd_open,
1296 .release = sd_release,
1297 .ioctl = sd_ioctl,
1298 .getgeo = sd_getgeo,
1299#ifdef CONFIG_COMPAT
1300 .compat_ioctl = sd_compat_ioctl,
1301#endif
1302 .check_events = sd_check_events,
1303 .revalidate_disk = sd_revalidate_disk,
1304 .unlock_native_capacity = sd_unlock_native_capacity,
1305};
1306
1307static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1308{
1309 u64 start_lba = blk_rq_pos(scmd->request);
1310 u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
1311 u64 bad_lba;
1312 int info_valid;
1313 /*
1314 * resid is optional but mostly filled in. When it's unused,
1315 * its value is zero, so we assume the whole buffer transferred
1316 */
1317 unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1318 unsigned int good_bytes;
1319
1320 if (scmd->request->cmd_type != REQ_TYPE_FS)
1321 return 0;
1322
1323 info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
1324 SCSI_SENSE_BUFFERSIZE,
1325 &bad_lba);
1326 if (!info_valid)
1327 return 0;
1328
1329 if (scsi_bufflen(scmd) <= scmd->device->sector_size)
1330 return 0;
1331
1332 if (scmd->device->sector_size < 512) {
1333 /* only legitimate sector_size here is 256 */
1334 start_lba <<= 1;
1335 end_lba <<= 1;
1336 } else {
1337 /* be careful ... don't want any overflows */
1338 u64 factor = scmd->device->sector_size / 512;
1339 do_div(start_lba, factor);
1340 do_div(end_lba, factor);
1341 }
1342
1343 /* The bad lba was reported incorrectly, we have no idea where
1344 * the error is.
1345 */
1346 if (bad_lba < start_lba || bad_lba >= end_lba)
1347 return 0;
1348
1349 /* This computation should always be done in terms of
1350 * the resolution of the device's medium.
1351 */
1352 good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
1353 return min(good_bytes, transferred);
1354}
1355
1356/**
1357 * sd_done - bottom half handler: called when the lower level
1358 * driver has completed (successfully or otherwise) a scsi command.
1359 * @SCpnt: mid-level's per command structure.
1360 *
1361 * Note: potentially run from within an ISR. Must not block.
1362 **/
1363static int sd_done(struct scsi_cmnd *SCpnt)
1364{
1365 int result = SCpnt->result;
1366 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1367 struct scsi_sense_hdr sshdr;
1368 struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1369 int sense_valid = 0;
1370 int sense_deferred = 0;
1371 unsigned char op = SCpnt->cmnd[0];
1372
1373 if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result)
1374 scsi_set_resid(SCpnt, 0);
1375
1376 if (result) {
1377 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1378 if (sense_valid)
1379 sense_deferred = scsi_sense_is_deferred(&sshdr);
1380 }
1381#ifdef CONFIG_SCSI_LOGGING
1382 SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
1383 if (sense_valid) {
1384 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
1385 "sd_done: sb[respc,sk,asc,"
1386 "ascq]=%x,%x,%x,%x\n",
1387 sshdr.response_code,
1388 sshdr.sense_key, sshdr.asc,
1389 sshdr.ascq));
1390 }
1391#endif
1392 if (driver_byte(result) != DRIVER_SENSE &&
1393 (!sense_valid || sense_deferred))
1394 goto out;
1395
1396 switch (sshdr.sense_key) {
1397 case HARDWARE_ERROR:
1398 case MEDIUM_ERROR:
1399 good_bytes = sd_completed_bytes(SCpnt);
1400 break;
1401 case RECOVERED_ERROR:
1402 good_bytes = scsi_bufflen(SCpnt);
1403 break;
1404 case NO_SENSE:
1405 /* This indicates a false check condition, so ignore it. An
1406 * unknown amount of data was transferred so treat it as an
1407 * error.
1408 */
1409 scsi_print_sense("sd", SCpnt);
1410 SCpnt->result = 0;
1411 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1412 break;
1413 case ABORTED_COMMAND:
1414 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
1415 good_bytes = sd_completed_bytes(SCpnt);
1416 break;
1417 case ILLEGAL_REQUEST:
1418 if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
1419 good_bytes = sd_completed_bytes(SCpnt);
1420 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1421 if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1422 (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME))
1423 sd_config_discard(sdkp, SD_LBP_DISABLE);
1424 break;
1425 default:
1426 break;
1427 }
1428 out:
1429 if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
1430 sd_dif_complete(SCpnt, good_bytes);
1431
1432 if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
1433 == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd) {
1434
1435 /* We have to print a failed command here as the
1436 * extended CDB gets freed before scsi_io_completion()
1437 * is called.
1438 */
1439 if (result)
1440 scsi_print_command(SCpnt);
1441
1442 mempool_free(SCpnt->cmnd, sd_cdb_pool);
1443 SCpnt->cmnd = NULL;
1444 SCpnt->cmd_len = 0;
1445 }
1446
1447 return good_bytes;
1448}
1449
1450/*
1451 * spinup disk - called only in sd_revalidate_disk()
1452 */
1453static void
1454sd_spinup_disk(struct scsi_disk *sdkp)
1455{
1456 unsigned char cmd[10];
1457 unsigned long spintime_expire = 0;
1458 int retries, spintime;
1459 unsigned int the_result;
1460 struct scsi_sense_hdr sshdr;
1461 int sense_valid = 0;
1462
1463 spintime = 0;
1464
1465 /* Spin up drives, as required. Only do this at boot time */
1466 /* Spinup needs to be done for module loads too. */
1467 do {
1468 retries = 0;
1469
1470 do {
1471 cmd[0] = TEST_UNIT_READY;
1472 memset((void *) &cmd[1], 0, 9);
1473
1474 the_result = scsi_execute_req(sdkp->device, cmd,
1475 DMA_NONE, NULL, 0,
1476 &sshdr, SD_TIMEOUT,
1477 SD_MAX_RETRIES, NULL);
1478
1479 /*
1480 * If the drive has indicated to us that it
1481 * doesn't have any media in it, don't bother
1482 * with any more polling.
1483 */
1484 if (media_not_present(sdkp, &sshdr))
1485 return;
1486
1487 if (the_result)
1488 sense_valid = scsi_sense_valid(&sshdr);
1489 retries++;
1490 } while (retries < 3 &&
1491 (!scsi_status_is_good(the_result) ||
1492 ((driver_byte(the_result) & DRIVER_SENSE) &&
1493 sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1494
1495 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1496 /* no sense, TUR either succeeded or failed
1497 * with a status error */
1498 if(!spintime && !scsi_status_is_good(the_result)) {
1499 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1500 sd_print_result(sdkp, the_result);
1501 }
1502 break;
1503 }
1504
1505 /*
1506 * The device does not want the automatic start to be issued.
1507 */
1508 if (sdkp->device->no_start_on_add)
1509 break;
1510
1511 if (sense_valid && sshdr.sense_key == NOT_READY) {
1512 if (sshdr.asc == 4 && sshdr.ascq == 3)
1513 break; /* manual intervention required */
1514 if (sshdr.asc == 4 && sshdr.ascq == 0xb)
1515 break; /* standby */
1516 if (sshdr.asc == 4 && sshdr.ascq == 0xc)
1517 break; /* unavailable */
1518 /*
1519 * Issue command to spin up drive when not ready
1520 */
1521 if (!spintime) {
1522 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1523 cmd[0] = START_STOP;
1524 cmd[1] = 1; /* Return immediately */
1525 memset((void *) &cmd[2], 0, 8);
1526 cmd[4] = 1; /* Start spin cycle */
1527 if (sdkp->device->start_stop_pwr_cond)
1528 cmd[4] |= 1 << 4;
1529 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1530 NULL, 0, &sshdr,
1531 SD_TIMEOUT, SD_MAX_RETRIES,
1532 NULL);
1533 spintime_expire = jiffies + 100 * HZ;
1534 spintime = 1;
1535 }
1536 /* Wait 1 second for next try */
1537 msleep(1000);
1538 printk(".");
1539
1540 /*
1541 * Wait for USB flash devices with slow firmware.
1542 * Yes, this sense key/ASC combination shouldn't
1543 * occur here. It's characteristic of these devices.
1544 */
1545 } else if (sense_valid &&
1546 sshdr.sense_key == UNIT_ATTENTION &&
1547 sshdr.asc == 0x28) {
1548 if (!spintime) {
1549 spintime_expire = jiffies + 5 * HZ;
1550 spintime = 1;
1551 }
1552 /* Wait 1 second for next try */
1553 msleep(1000);
1554 } else {
1555 /* we don't understand the sense code, so it's
1556 * probably pointless to loop */
1557 if(!spintime) {
1558 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1559 sd_print_sense_hdr(sdkp, &sshdr);
1560 }
1561 break;
1562 }
1563
1564 } while (spintime && time_before_eq(jiffies, spintime_expire));
1565
1566 if (spintime) {
1567 if (scsi_status_is_good(the_result))
1568 printk("ready\n");
1569 else
1570 printk("not responding...\n");
1571 }
1572}
1573
1574
1575/*
1576 * Determine whether disk supports Data Integrity Field.
1577 */
1578static void sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
1579{
1580 struct scsi_device *sdp = sdkp->device;
1581 u8 type;
1582
1583 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
1584 return;
1585
1586 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
1587
1588 if (type == sdkp->protection_type || !sdkp->first_scan)
1589 return;
1590
1591 sdkp->protection_type = type;
1592
1593 if (type > SD_DIF_TYPE3_PROTECTION) {
1594 sd_printk(KERN_ERR, sdkp, "formatted with unsupported " \
1595 "protection type %u. Disabling disk!\n", type);
1596 sdkp->capacity = 0;
1597 return;
1598 }
1599
1600 if (scsi_host_dif_capable(sdp->host, type))
1601 sd_printk(KERN_NOTICE, sdkp,
1602 "Enabling DIF Type %u protection\n", type);
1603 else
1604 sd_printk(KERN_NOTICE, sdkp,
1605 "Disabling DIF Type %u protection\n", type);
1606}
1607
1608static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
1609 struct scsi_sense_hdr *sshdr, int sense_valid,
1610 int the_result)
1611{
1612 sd_print_result(sdkp, the_result);
1613 if (driver_byte(the_result) & DRIVER_SENSE)
1614 sd_print_sense_hdr(sdkp, sshdr);
1615 else
1616 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
1617
1618 /*
1619 * Set dirty bit for removable devices if not ready -
1620 * sometimes drives will not report this properly.
1621 */
1622 if (sdp->removable &&
1623 sense_valid && sshdr->sense_key == NOT_READY)
1624 set_media_not_present(sdkp);
1625
1626 /*
1627 * We used to set media_present to 0 here to indicate no media
1628 * in the drive, but some drives fail read capacity even with
1629 * media present, so we can't do that.
1630 */
1631 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
1632}
1633
1634#define RC16_LEN 32
1635#if RC16_LEN > SD_BUF_SIZE
1636#error RC16_LEN must not be more than SD_BUF_SIZE
1637#endif
1638
1639#define READ_CAPACITY_RETRIES_ON_RESET 10
1640
1641static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
1642 unsigned char *buffer)
1643{
1644 unsigned char cmd[16];
1645 struct scsi_sense_hdr sshdr;
1646 int sense_valid = 0;
1647 int the_result;
1648 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1649 unsigned int alignment;
1650 unsigned long long lba;
1651 unsigned sector_size;
1652
1653 if (sdp->no_read_capacity_16)
1654 return -EINVAL;
1655
1656 do {
1657 memset(cmd, 0, 16);
1658 cmd[0] = SERVICE_ACTION_IN;
1659 cmd[1] = SAI_READ_CAPACITY_16;
1660 cmd[13] = RC16_LEN;
1661 memset(buffer, 0, RC16_LEN);
1662
1663 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1664 buffer, RC16_LEN, &sshdr,
1665 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1666
1667 if (media_not_present(sdkp, &sshdr))
1668 return -ENODEV;
1669
1670 if (the_result) {
1671 sense_valid = scsi_sense_valid(&sshdr);
1672 if (sense_valid &&
1673 sshdr.sense_key == ILLEGAL_REQUEST &&
1674 (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1675 sshdr.ascq == 0x00)
1676 /* Invalid Command Operation Code or
1677 * Invalid Field in CDB, just retry
1678 * silently with RC10 */
1679 return -EINVAL;
1680 if (sense_valid &&
1681 sshdr.sense_key == UNIT_ATTENTION &&
1682 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1683 /* Device reset might occur several times,
1684 * give it one more chance */
1685 if (--reset_retries > 0)
1686 continue;
1687 }
1688 retries--;
1689
1690 } while (the_result && retries);
1691
1692 if (the_result) {
1693 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
1694 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1695 return -EINVAL;
1696 }
1697
1698 sector_size = get_unaligned_be32(&buffer[8]);
1699 lba = get_unaligned_be64(&buffer[0]);
1700
1701 sd_read_protection_type(sdkp, buffer);
1702
1703 if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
1704 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1705 "kernel compiled with support for large block "
1706 "devices.\n");
1707 sdkp->capacity = 0;
1708 return -EOVERFLOW;
1709 }
1710
1711 /* Logical blocks per physical block exponent */
1712 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
1713
1714 /* Lowest aligned logical block */
1715 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
1716 blk_queue_alignment_offset(sdp->request_queue, alignment);
1717 if (alignment && sdkp->first_scan)
1718 sd_printk(KERN_NOTICE, sdkp,
1719 "physical block alignment offset: %u\n", alignment);
1720
1721 if (buffer[14] & 0x80) { /* LBPME */
1722 sdkp->lbpme = 1;
1723
1724 if (buffer[14] & 0x40) /* LBPRZ */
1725 sdkp->lbprz = 1;
1726
1727 sd_config_discard(sdkp, SD_LBP_WS16);
1728 }
1729
1730 sdkp->capacity = lba + 1;
1731 return sector_size;
1732}
1733
1734static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
1735 unsigned char *buffer)
1736{
1737 unsigned char cmd[16];
1738 struct scsi_sense_hdr sshdr;
1739 int sense_valid = 0;
1740 int the_result;
1741 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1742 sector_t lba;
1743 unsigned sector_size;
1744
1745 do {
1746 cmd[0] = READ_CAPACITY;
1747 memset(&cmd[1], 0, 9);
1748 memset(buffer, 0, 8);
1749
1750 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1751 buffer, 8, &sshdr,
1752 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1753
1754 if (media_not_present(sdkp, &sshdr))
1755 return -ENODEV;
1756
1757 if (the_result) {
1758 sense_valid = scsi_sense_valid(&sshdr);
1759 if (sense_valid &&
1760 sshdr.sense_key == UNIT_ATTENTION &&
1761 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1762 /* Device reset might occur several times,
1763 * give it one more chance */
1764 if (--reset_retries > 0)
1765 continue;
1766 }
1767 retries--;
1768
1769 } while (the_result && retries);
1770
1771 if (the_result) {
1772 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
1773 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1774 return -EINVAL;
1775 }
1776
1777 sector_size = get_unaligned_be32(&buffer[4]);
1778 lba = get_unaligned_be32(&buffer[0]);
1779
1780 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
1781 /* Some buggy (usb cardreader) devices return an lba of
1782 0xffffffff when the want to report a size of 0 (with
1783 which they really mean no media is present) */
1784 sdkp->capacity = 0;
1785 sdkp->physical_block_size = sector_size;
1786 return sector_size;
1787 }
1788
1789 if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
1790 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
1791 "kernel compiled with support for large block "
1792 "devices.\n");
1793 sdkp->capacity = 0;
1794 return -EOVERFLOW;
1795 }
1796
1797 sdkp->capacity = lba + 1;
1798 sdkp->physical_block_size = sector_size;
1799 return sector_size;
1800}
1801
1802static int sd_try_rc16_first(struct scsi_device *sdp)
1803{
1804 if (sdp->host->max_cmd_len < 16)
1805 return 0;
1806 if (sdp->scsi_level > SCSI_SPC_2)
1807 return 1;
1808 if (scsi_device_protection(sdp))
1809 return 1;
1810 return 0;
1811}
1812
1813/*
1814 * read disk capacity
1815 */
1816static void
1817sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
1818{
1819 int sector_size;
1820 struct scsi_device *sdp = sdkp->device;
1821 sector_t old_capacity = sdkp->capacity;
1822
1823 if (sd_try_rc16_first(sdp)) {
1824 sector_size = read_capacity_16(sdkp, sdp, buffer);
1825 if (sector_size == -EOVERFLOW)
1826 goto got_data;
1827 if (sector_size == -ENODEV)
1828 return;
1829 if (sector_size < 0)
1830 sector_size = read_capacity_10(sdkp, sdp, buffer);
1831 if (sector_size < 0)
1832 return;
1833 } else {
1834 sector_size = read_capacity_10(sdkp, sdp, buffer);
1835 if (sector_size == -EOVERFLOW)
1836 goto got_data;
1837 if (sector_size < 0)
1838 return;
1839 if ((sizeof(sdkp->capacity) > 4) &&
1840 (sdkp->capacity > 0xffffffffULL)) {
1841 int old_sector_size = sector_size;
1842 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
1843 "Trying to use READ CAPACITY(16).\n");
1844 sector_size = read_capacity_16(sdkp, sdp, buffer);
1845 if (sector_size < 0) {
1846 sd_printk(KERN_NOTICE, sdkp,
1847 "Using 0xffffffff as device size\n");
1848 sdkp->capacity = 1 + (sector_t) 0xffffffff;
1849 sector_size = old_sector_size;
1850 goto got_data;
1851 }
1852 }
1853 }
1854
1855 /* Some devices are known to return the total number of blocks,
1856 * not the highest block number. Some devices have versions
1857 * which do this and others which do not. Some devices we might
1858 * suspect of doing this but we don't know for certain.
1859 *
1860 * If we know the reported capacity is wrong, decrement it. If
1861 * we can only guess, then assume the number of blocks is even
1862 * (usually true but not always) and err on the side of lowering
1863 * the capacity.
1864 */
1865 if (sdp->fix_capacity ||
1866 (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
1867 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
1868 "from its reported value: %llu\n",
1869 (unsigned long long) sdkp->capacity);
1870 --sdkp->capacity;
1871 }
1872
1873got_data:
1874 if (sector_size == 0) {
1875 sector_size = 512;
1876 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
1877 "assuming 512.\n");
1878 }
1879
1880 if (sector_size != 512 &&
1881 sector_size != 1024 &&
1882 sector_size != 2048 &&
1883 sector_size != 4096 &&
1884 sector_size != 256) {
1885 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
1886 sector_size);
1887 /*
1888 * The user might want to re-format the drive with
1889 * a supported sectorsize. Once this happens, it
1890 * would be relatively trivial to set the thing up.
1891 * For this reason, we leave the thing in the table.
1892 */
1893 sdkp->capacity = 0;
1894 /*
1895 * set a bogus sector size so the normal read/write
1896 * logic in the block layer will eventually refuse any
1897 * request on this device without tripping over power
1898 * of two sector size assumptions
1899 */
1900 sector_size = 512;
1901 }
1902 blk_queue_logical_block_size(sdp->request_queue, sector_size);
1903
1904 {
1905 char cap_str_2[10], cap_str_10[10];
1906 u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
1907
1908 string_get_size(sz, STRING_UNITS_2, cap_str_2,
1909 sizeof(cap_str_2));
1910 string_get_size(sz, STRING_UNITS_10, cap_str_10,
1911 sizeof(cap_str_10));
1912
1913 if (sdkp->first_scan || old_capacity != sdkp->capacity) {
1914 sd_printk(KERN_NOTICE, sdkp,
1915 "%llu %d-byte logical blocks: (%s/%s)\n",
1916 (unsigned long long)sdkp->capacity,
1917 sector_size, cap_str_10, cap_str_2);
1918
1919 if (sdkp->physical_block_size != sector_size)
1920 sd_printk(KERN_NOTICE, sdkp,
1921 "%u-byte physical blocks\n",
1922 sdkp->physical_block_size);
1923 }
1924 }
1925
1926 /* Rescale capacity to 512-byte units */
1927 if (sector_size == 4096)
1928 sdkp->capacity <<= 3;
1929 else if (sector_size == 2048)
1930 sdkp->capacity <<= 2;
1931 else if (sector_size == 1024)
1932 sdkp->capacity <<= 1;
1933 else if (sector_size == 256)
1934 sdkp->capacity >>= 1;
1935
1936 blk_queue_physical_block_size(sdp->request_queue,
1937 sdkp->physical_block_size);
1938 sdkp->device->sector_size = sector_size;
1939}
1940
1941/* called with buffer of length 512 */
1942static inline int
1943sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
1944 unsigned char *buffer, int len, struct scsi_mode_data *data,
1945 struct scsi_sense_hdr *sshdr)
1946{
1947 return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
1948 SD_TIMEOUT, SD_MAX_RETRIES, data,
1949 sshdr);
1950}
1951
1952/*
1953 * read write protect setting, if possible - called only in sd_revalidate_disk()
1954 * called with buffer of length SD_BUF_SIZE
1955 */
1956static void
1957sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
1958{
1959 int res;
1960 struct scsi_device *sdp = sdkp->device;
1961 struct scsi_mode_data data;
1962 int old_wp = sdkp->write_prot;
1963
1964 set_disk_ro(sdkp->disk, 0);
1965 if (sdp->skip_ms_page_3f) {
1966 sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
1967 return;
1968 }
1969
1970 if (sdp->use_192_bytes_for_3f) {
1971 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
1972 } else {
1973 /*
1974 * First attempt: ask for all pages (0x3F), but only 4 bytes.
1975 * We have to start carefully: some devices hang if we ask
1976 * for more than is available.
1977 */
1978 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
1979
1980 /*
1981 * Second attempt: ask for page 0 When only page 0 is
1982 * implemented, a request for page 3F may return Sense Key
1983 * 5: Illegal Request, Sense Code 24: Invalid field in
1984 * CDB.
1985 */
1986 if (!scsi_status_is_good(res))
1987 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
1988
1989 /*
1990 * Third attempt: ask 255 bytes, as we did earlier.
1991 */
1992 if (!scsi_status_is_good(res))
1993 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
1994 &data, NULL);
1995 }
1996
1997 if (!scsi_status_is_good(res)) {
1998 sd_printk(KERN_WARNING, sdkp,
1999 "Test WP failed, assume Write Enabled\n");
2000 } else {
2001 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2002 set_disk_ro(sdkp->disk, sdkp->write_prot);
2003 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2004 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2005 sdkp->write_prot ? "on" : "off");
2006 sd_printk(KERN_DEBUG, sdkp,
2007 "Mode Sense: %02x %02x %02x %02x\n",
2008 buffer[0], buffer[1], buffer[2], buffer[3]);
2009 }
2010 }
2011}
2012
2013/*
2014 * sd_read_cache_type - called only from sd_revalidate_disk()
2015 * called with buffer of length SD_BUF_SIZE
2016 */
2017static void
2018sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2019{
2020 int len = 0, res;
2021 struct scsi_device *sdp = sdkp->device;
2022
2023 int dbd;
2024 int modepage;
2025 int first_len;
2026 struct scsi_mode_data data;
2027 struct scsi_sense_hdr sshdr;
2028 int old_wce = sdkp->WCE;
2029 int old_rcd = sdkp->RCD;
2030 int old_dpofua = sdkp->DPOFUA;
2031
2032 first_len = 4;
2033 if (sdp->skip_ms_page_8) {
2034 if (sdp->type == TYPE_RBC)
2035 goto defaults;
2036 else {
2037 if (sdp->skip_ms_page_3f)
2038 goto defaults;
2039 modepage = 0x3F;
2040 if (sdp->use_192_bytes_for_3f)
2041 first_len = 192;
2042 dbd = 0;
2043 }
2044 } else if (sdp->type == TYPE_RBC) {
2045 modepage = 6;
2046 dbd = 8;
2047 } else {
2048 modepage = 8;
2049 dbd = 0;
2050 }
2051
2052 /* cautiously ask */
2053 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2054 &data, &sshdr);
2055
2056 if (!scsi_status_is_good(res))
2057 goto bad_sense;
2058
2059 if (!data.header_length) {
2060 modepage = 6;
2061 first_len = 0;
2062 sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
2063 }
2064
2065 /* that went OK, now ask for the proper length */
2066 len = data.length;
2067
2068 /*
2069 * We're only interested in the first three bytes, actually.
2070 * But the data cache page is defined for the first 20.
2071 */
2072 if (len < 3)
2073 goto bad_sense;
2074 else if (len > SD_BUF_SIZE) {
2075 sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2076 "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2077 len = SD_BUF_SIZE;
2078 }
2079 if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2080 len = 192;
2081
2082 /* Get the data */
2083 if (len > first_len)
2084 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2085 &data, &sshdr);
2086
2087 if (scsi_status_is_good(res)) {
2088 int offset = data.header_length + data.block_descriptor_length;
2089
2090 while (offset < len) {
2091 u8 page_code = buffer[offset] & 0x3F;
2092 u8 spf = buffer[offset] & 0x40;
2093
2094 if (page_code == 8 || page_code == 6) {
2095 /* We're interested only in the first 3 bytes.
2096 */
2097 if (len - offset <= 2) {
2098 sd_printk(KERN_ERR, sdkp, "Incomplete "
2099 "mode parameter data\n");
2100 goto defaults;
2101 } else {
2102 modepage = page_code;
2103 goto Page_found;
2104 }
2105 } else {
2106 /* Go to the next page */
2107 if (spf && len - offset > 3)
2108 offset += 4 + (buffer[offset+2] << 8) +
2109 buffer[offset+3];
2110 else if (!spf && len - offset > 1)
2111 offset += 2 + buffer[offset+1];
2112 else {
2113 sd_printk(KERN_ERR, sdkp, "Incomplete "
2114 "mode parameter data\n");
2115 goto defaults;
2116 }
2117 }
2118 }
2119
2120 if (modepage == 0x3F) {
2121 sd_printk(KERN_ERR, sdkp, "No Caching mode page "
2122 "present\n");
2123 goto defaults;
2124 } else if ((buffer[offset] & 0x3f) != modepage) {
2125 sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
2126 goto defaults;
2127 }
2128 Page_found:
2129 if (modepage == 8) {
2130 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2131 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2132 } else {
2133 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2134 sdkp->RCD = 0;
2135 }
2136
2137 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2138 if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
2139 sd_printk(KERN_NOTICE, sdkp,
2140 "Uses READ/WRITE(6), disabling FUA\n");
2141 sdkp->DPOFUA = 0;
2142 }
2143
2144 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2145 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2146 sd_printk(KERN_NOTICE, sdkp,
2147 "Write cache: %s, read cache: %s, %s\n",
2148 sdkp->WCE ? "enabled" : "disabled",
2149 sdkp->RCD ? "disabled" : "enabled",
2150 sdkp->DPOFUA ? "supports DPO and FUA"
2151 : "doesn't support DPO or FUA");
2152
2153 return;
2154 }
2155
2156bad_sense:
2157 if (scsi_sense_valid(&sshdr) &&
2158 sshdr.sense_key == ILLEGAL_REQUEST &&
2159 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2160 /* Invalid field in CDB */
2161 sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2162 else
2163 sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
2164
2165defaults:
2166 sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
2167 sdkp->WCE = 0;
2168 sdkp->RCD = 0;
2169 sdkp->DPOFUA = 0;
2170}
2171
2172/*
2173 * The ATO bit indicates whether the DIF application tag is available
2174 * for use by the operating system.
2175 */
2176static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2177{
2178 int res, offset;
2179 struct scsi_device *sdp = sdkp->device;
2180 struct scsi_mode_data data;
2181 struct scsi_sense_hdr sshdr;
2182
2183 if (sdp->type != TYPE_DISK)
2184 return;
2185
2186 if (sdkp->protection_type == 0)
2187 return;
2188
2189 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2190 SD_MAX_RETRIES, &data, &sshdr);
2191
2192 if (!scsi_status_is_good(res) || !data.header_length ||
2193 data.length < 6) {
2194 sd_printk(KERN_WARNING, sdkp,
2195 "getting Control mode page failed, assume no ATO\n");
2196
2197 if (scsi_sense_valid(&sshdr))
2198 sd_print_sense_hdr(sdkp, &sshdr);
2199
2200 return;
2201 }
2202
2203 offset = data.header_length + data.block_descriptor_length;
2204
2205 if ((buffer[offset] & 0x3f) != 0x0a) {
2206 sd_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2207 return;
2208 }
2209
2210 if ((buffer[offset + 5] & 0x80) == 0)
2211 return;
2212
2213 sdkp->ATO = 1;
2214
2215 return;
2216}
2217
2218/**
2219 * sd_read_block_limits - Query disk device for preferred I/O sizes.
2220 * @disk: disk to query
2221 */
2222static void sd_read_block_limits(struct scsi_disk *sdkp)
2223{
2224 unsigned int sector_sz = sdkp->device->sector_size;
2225 const int vpd_len = 64;
2226 unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2227
2228 if (!buffer ||
2229 /* Block Limits VPD */
2230 scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2231 goto out;
2232
2233 blk_queue_io_min(sdkp->disk->queue,
2234 get_unaligned_be16(&buffer[6]) * sector_sz);
2235 blk_queue_io_opt(sdkp->disk->queue,
2236 get_unaligned_be32(&buffer[12]) * sector_sz);
2237
2238 if (buffer[3] == 0x3c) {
2239 unsigned int lba_count, desc_count;
2240
2241 sdkp->max_ws_blocks =
2242 (u32) min_not_zero(get_unaligned_be64(&buffer[36]),
2243 (u64)0xffffffff);
2244
2245 if (!sdkp->lbpme)
2246 goto out;
2247
2248 lba_count = get_unaligned_be32(&buffer[20]);
2249 desc_count = get_unaligned_be32(&buffer[24]);
2250
2251 if (lba_count && desc_count)
2252 sdkp->max_unmap_blocks = lba_count;
2253
2254 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2255
2256 if (buffer[32] & 0x80)
2257 sdkp->unmap_alignment =
2258 get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2259
2260 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2261
2262 if (sdkp->max_unmap_blocks)
2263 sd_config_discard(sdkp, SD_LBP_UNMAP);
2264 else
2265 sd_config_discard(sdkp, SD_LBP_WS16);
2266
2267 } else { /* LBP VPD page tells us what to use */
2268
2269 if (sdkp->lbpu && sdkp->max_unmap_blocks)
2270 sd_config_discard(sdkp, SD_LBP_UNMAP);
2271 else if (sdkp->lbpws)
2272 sd_config_discard(sdkp, SD_LBP_WS16);
2273 else if (sdkp->lbpws10)
2274 sd_config_discard(sdkp, SD_LBP_WS10);
2275 else
2276 sd_config_discard(sdkp, SD_LBP_DISABLE);
2277 }
2278 }
2279
2280 out:
2281 kfree(buffer);
2282}
2283
2284/**
2285 * sd_read_block_characteristics - Query block dev. characteristics
2286 * @disk: disk to query
2287 */
2288static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2289{
2290 unsigned char *buffer;
2291 u16 rot;
2292 const int vpd_len = 64;
2293
2294 buffer = kmalloc(vpd_len, GFP_KERNEL);
2295
2296 if (!buffer ||
2297 /* Block Device Characteristics VPD */
2298 scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2299 goto out;
2300
2301 rot = get_unaligned_be16(&buffer[4]);
2302
2303 if (rot == 1)
2304 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
2305
2306 out:
2307 kfree(buffer);
2308}
2309
2310/**
2311 * sd_read_block_provisioning - Query provisioning VPD page
2312 * @disk: disk to query
2313 */
2314static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2315{
2316 unsigned char *buffer;
2317 const int vpd_len = 8;
2318
2319 if (sdkp->lbpme == 0)
2320 return;
2321
2322 buffer = kmalloc(vpd_len, GFP_KERNEL);
2323
2324 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
2325 goto out;
2326
2327 sdkp->lbpvpd = 1;
2328 sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */
2329 sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
2330 sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
2331
2332 out:
2333 kfree(buffer);
2334}
2335
2336static int sd_try_extended_inquiry(struct scsi_device *sdp)
2337{
2338 /*
2339 * Although VPD inquiries can go to SCSI-2 type devices,
2340 * some USB ones crash on receiving them, and the pages
2341 * we currently ask for are for SPC-3 and beyond
2342 */
2343 if (sdp->scsi_level > SCSI_SPC_2)
2344 return 1;
2345 return 0;
2346}
2347
2348/**
2349 * sd_revalidate_disk - called the first time a new disk is seen,
2350 * performs disk spin up, read_capacity, etc.
2351 * @disk: struct gendisk we care about
2352 **/
2353static int sd_revalidate_disk(struct gendisk *disk)
2354{
2355 struct scsi_disk *sdkp = scsi_disk(disk);
2356 struct scsi_device *sdp = sdkp->device;
2357 unsigned char *buffer;
2358 unsigned flush = 0;
2359
2360 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
2361 "sd_revalidate_disk\n"));
2362
2363 /*
2364 * If the device is offline, don't try and read capacity or any
2365 * of the other niceties.
2366 */
2367 if (!scsi_device_online(sdp))
2368 goto out;
2369
2370 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
2371 if (!buffer) {
2372 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
2373 "allocation failure.\n");
2374 goto out;
2375 }
2376
2377 sd_spinup_disk(sdkp);
2378
2379 /*
2380 * Without media there is no reason to ask; moreover, some devices
2381 * react badly if we do.
2382 */
2383 if (sdkp->media_present) {
2384 sd_read_capacity(sdkp, buffer);
2385
2386 if (sd_try_extended_inquiry(sdp)) {
2387 sd_read_block_provisioning(sdkp);
2388 sd_read_block_limits(sdkp);
2389 sd_read_block_characteristics(sdkp);
2390 }
2391
2392 sd_read_write_protect_flag(sdkp, buffer);
2393 sd_read_cache_type(sdkp, buffer);
2394 sd_read_app_tag_own(sdkp, buffer);
2395 }
2396
2397 sdkp->first_scan = 0;
2398
2399 /*
2400 * We now have all cache related info, determine how we deal
2401 * with flush requests.
2402 */
2403 if (sdkp->WCE) {
2404 flush |= REQ_FLUSH;
2405 if (sdkp->DPOFUA)
2406 flush |= REQ_FUA;
2407 }
2408
2409 blk_queue_flush(sdkp->disk->queue, flush);
2410
2411 set_capacity(disk, sdkp->capacity);
2412 kfree(buffer);
2413
2414 out:
2415 return 0;
2416}
2417
2418/**
2419 * sd_unlock_native_capacity - unlock native capacity
2420 * @disk: struct gendisk to set capacity for
2421 *
2422 * Block layer calls this function if it detects that partitions
2423 * on @disk reach beyond the end of the device. If the SCSI host
2424 * implements ->unlock_native_capacity() method, it's invoked to
2425 * give it a chance to adjust the device capacity.
2426 *
2427 * CONTEXT:
2428 * Defined by block layer. Might sleep.
2429 */
2430static void sd_unlock_native_capacity(struct gendisk *disk)
2431{
2432 struct scsi_device *sdev = scsi_disk(disk)->device;
2433
2434 if (sdev->host->hostt->unlock_native_capacity)
2435 sdev->host->hostt->unlock_native_capacity(sdev);
2436}
2437
2438/**
2439 * sd_format_disk_name - format disk name
2440 * @prefix: name prefix - ie. "sd" for SCSI disks
2441 * @index: index of the disk to format name for
2442 * @buf: output buffer
2443 * @buflen: length of the output buffer
2444 *
2445 * SCSI disk names starts at sda. The 26th device is sdz and the
2446 * 27th is sdaa. The last one for two lettered suffix is sdzz
2447 * which is followed by sdaaa.
2448 *
2449 * This is basically 26 base counting with one extra 'nil' entry
2450 * at the beginning from the second digit on and can be
2451 * determined using similar method as 26 base conversion with the
2452 * index shifted -1 after each digit is computed.
2453 *
2454 * CONTEXT:
2455 * Don't care.
2456 *
2457 * RETURNS:
2458 * 0 on success, -errno on failure.
2459 */
2460static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
2461{
2462 const int base = 'z' - 'a' + 1;
2463 char *begin = buf + strlen(prefix);
2464 char *end = buf + buflen;
2465 char *p;
2466 int unit;
2467
2468 p = end - 1;
2469 *p = '\0';
2470 unit = base;
2471 do {
2472 if (p == begin)
2473 return -EINVAL;
2474 *--p = 'a' + (index % unit);
2475 index = (index / unit) - 1;
2476 } while (index >= 0);
2477
2478 memmove(begin, p, end - p);
2479 memcpy(buf, prefix, strlen(prefix));
2480
2481 return 0;
2482}
2483
2484/*
2485 * The asynchronous part of sd_probe
2486 */
2487static void sd_probe_async(void *data, async_cookie_t cookie)
2488{
2489 struct scsi_disk *sdkp = data;
2490 struct scsi_device *sdp;
2491 struct gendisk *gd;
2492 u32 index;
2493 struct device *dev;
2494
2495 sdp = sdkp->device;
2496 gd = sdkp->disk;
2497 index = sdkp->index;
2498 dev = &sdp->sdev_gendev;
2499
2500 gd->major = sd_major((index & 0xf0) >> 4);
2501 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
2502 gd->minors = SD_MINORS;
2503
2504 gd->fops = &sd_fops;
2505 gd->private_data = &sdkp->driver;
2506 gd->queue = sdkp->device->request_queue;
2507
2508 /* defaults, until the device tells us otherwise */
2509 sdp->sector_size = 512;
2510 sdkp->capacity = 0;
2511 sdkp->media_present = 1;
2512 sdkp->write_prot = 0;
2513 sdkp->WCE = 0;
2514 sdkp->RCD = 0;
2515 sdkp->ATO = 0;
2516 sdkp->first_scan = 1;
2517
2518 sd_revalidate_disk(gd);
2519
2520 blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
2521 blk_queue_unprep_rq(sdp->request_queue, sd_unprep_fn);
2522
2523 gd->driverfs_dev = &sdp->sdev_gendev;
2524 gd->flags = GENHD_FL_EXT_DEVT;
2525 if (sdp->removable) {
2526 gd->flags |= GENHD_FL_REMOVABLE;
2527 gd->events |= DISK_EVENT_MEDIA_CHANGE;
2528 }
2529
2530 add_disk(gd);
2531 sd_dif_config_host(sdkp);
2532
2533 sd_revalidate_disk(gd);
2534
2535 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
2536 sdp->removable ? "removable " : "");
2537 scsi_autopm_put_device(sdp);
2538 put_device(&sdkp->dev);
2539}
2540
2541/**
2542 * sd_probe - called during driver initialization and whenever a
2543 * new scsi device is attached to the system. It is called once
2544 * for each scsi device (not just disks) present.
2545 * @dev: pointer to device object
2546 *
2547 * Returns 0 if successful (or not interested in this scsi device
2548 * (e.g. scanner)); 1 when there is an error.
2549 *
2550 * Note: this function is invoked from the scsi mid-level.
2551 * This function sets up the mapping between a given
2552 * <host,channel,id,lun> (found in sdp) and new device name
2553 * (e.g. /dev/sda). More precisely it is the block device major
2554 * and minor number that is chosen here.
2555 *
2556 * Assume sd_attach is not re-entrant (for time being)
2557 * Also think about sd_attach() and sd_remove() running coincidentally.
2558 **/
2559static int sd_probe(struct device *dev)
2560{
2561 struct scsi_device *sdp = to_scsi_device(dev);
2562 struct scsi_disk *sdkp;
2563 struct gendisk *gd;
2564 int index;
2565 int error;
2566
2567 error = -ENODEV;
2568 if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
2569 goto out;
2570
2571 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
2572 "sd_attach\n"));
2573
2574 error = -ENOMEM;
2575 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
2576 if (!sdkp)
2577 goto out;
2578
2579 gd = alloc_disk(SD_MINORS);
2580 if (!gd)
2581 goto out_free;
2582
2583 do {
2584 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
2585 goto out_put;
2586
2587 spin_lock(&sd_index_lock);
2588 error = ida_get_new(&sd_index_ida, &index);
2589 spin_unlock(&sd_index_lock);
2590 } while (error == -EAGAIN);
2591
2592 if (error)
2593 goto out_put;
2594
2595 if (index >= SD_MAX_DISKS) {
2596 error = -ENODEV;
2597 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name space exhausted.\n");
2598 goto out_free_index;
2599 }
2600
2601 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
2602 if (error)
2603 goto out_free_index;
2604
2605 sdkp->device = sdp;
2606 sdkp->driver = &sd_template;
2607 sdkp->disk = gd;
2608 sdkp->index = index;
2609 atomic_set(&sdkp->openers, 0);
2610
2611 if (!sdp->request_queue->rq_timeout) {
2612 if (sdp->type != TYPE_MOD)
2613 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
2614 else
2615 blk_queue_rq_timeout(sdp->request_queue,
2616 SD_MOD_TIMEOUT);
2617 }
2618
2619 device_initialize(&sdkp->dev);
2620 sdkp->dev.parent = dev;
2621 sdkp->dev.class = &sd_disk_class;
2622 dev_set_name(&sdkp->dev, dev_name(dev));
2623
2624 if (device_add(&sdkp->dev))
2625 goto out_free_index;
2626
2627 get_device(dev);
2628 dev_set_drvdata(dev, sdkp);
2629
2630 get_device(&sdkp->dev); /* prevent release before async_schedule */
2631 async_schedule(sd_probe_async, sdkp);
2632
2633 return 0;
2634
2635 out_free_index:
2636 spin_lock(&sd_index_lock);
2637 ida_remove(&sd_index_ida, index);
2638 spin_unlock(&sd_index_lock);
2639 out_put:
2640 put_disk(gd);
2641 out_free:
2642 kfree(sdkp);
2643 out:
2644 return error;
2645}
2646
2647/**
2648 * sd_remove - called whenever a scsi disk (previously recognized by
2649 * sd_probe) is detached from the system. It is called (potentially
2650 * multiple times) during sd module unload.
2651 * @sdp: pointer to mid level scsi device object
2652 *
2653 * Note: this function is invoked from the scsi mid-level.
2654 * This function potentially frees up a device name (e.g. /dev/sdc)
2655 * that could be re-used by a subsequent sd_probe().
2656 * This function is not called when the built-in sd driver is "exit-ed".
2657 **/
2658static int sd_remove(struct device *dev)
2659{
2660 struct scsi_disk *sdkp;
2661
2662 sdkp = dev_get_drvdata(dev);
2663 scsi_autopm_get_device(sdkp->device);
2664
2665 async_synchronize_full();
2666 blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
2667 blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
2668 device_del(&sdkp->dev);
2669 del_gendisk(sdkp->disk);
2670 sd_shutdown(dev);
2671
2672 mutex_lock(&sd_ref_mutex);
2673 dev_set_drvdata(dev, NULL);
2674 put_device(&sdkp->dev);
2675 mutex_unlock(&sd_ref_mutex);
2676
2677 return 0;
2678}
2679
2680/**
2681 * scsi_disk_release - Called to free the scsi_disk structure
2682 * @dev: pointer to embedded class device
2683 *
2684 * sd_ref_mutex must be held entering this routine. Because it is
2685 * called on last put, you should always use the scsi_disk_get()
2686 * scsi_disk_put() helpers which manipulate the semaphore directly
2687 * and never do a direct put_device.
2688 **/
2689static void scsi_disk_release(struct device *dev)
2690{
2691 struct scsi_disk *sdkp = to_scsi_disk(dev);
2692 struct gendisk *disk = sdkp->disk;
2693
2694 spin_lock(&sd_index_lock);
2695 ida_remove(&sd_index_ida, sdkp->index);
2696 spin_unlock(&sd_index_lock);
2697
2698 disk->private_data = NULL;
2699 put_disk(disk);
2700 put_device(&sdkp->device->sdev_gendev);
2701
2702 kfree(sdkp);
2703}
2704
2705static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
2706{
2707 unsigned char cmd[6] = { START_STOP }; /* START_VALID */
2708 struct scsi_sense_hdr sshdr;
2709 struct scsi_device *sdp = sdkp->device;
2710 int res;
2711
2712 if (start)
2713 cmd[4] |= 1; /* START */
2714
2715 if (sdp->start_stop_pwr_cond)
2716 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
2717
2718 if (!scsi_device_online(sdp))
2719 return -ENODEV;
2720
2721 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
2722 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2723 if (res) {
2724 sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
2725 sd_print_result(sdkp, res);
2726 if (driver_byte(res) & DRIVER_SENSE)
2727 sd_print_sense_hdr(sdkp, &sshdr);
2728 }
2729
2730 return res;
2731}
2732
2733/*
2734 * Send a SYNCHRONIZE CACHE instruction down to the device through
2735 * the normal SCSI command structure. Wait for the command to
2736 * complete.
2737 */
2738static void sd_shutdown(struct device *dev)
2739{
2740 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2741
2742 if (!sdkp)
2743 return; /* this can happen */
2744
2745 if (sdkp->WCE) {
2746 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
2747 sd_sync_cache(sdkp);
2748 }
2749
2750 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
2751 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
2752 sd_start_stop_device(sdkp, 0);
2753 }
2754
2755 scsi_disk_put(sdkp);
2756}
2757
2758static int sd_suspend(struct device *dev, pm_message_t mesg)
2759{
2760 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2761 int ret = 0;
2762
2763 if (!sdkp)
2764 return 0; /* this can happen */
2765
2766 if (sdkp->WCE) {
2767 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
2768 ret = sd_sync_cache(sdkp);
2769 if (ret)
2770 goto done;
2771 }
2772
2773 if ((mesg.event & PM_EVENT_SLEEP) && sdkp->device->manage_start_stop) {
2774 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
2775 ret = sd_start_stop_device(sdkp, 0);
2776 }
2777
2778done:
2779 scsi_disk_put(sdkp);
2780 return ret;
2781}
2782
2783static int sd_resume(struct device *dev)
2784{
2785 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
2786 int ret = 0;
2787
2788 if (!sdkp->device->manage_start_stop)
2789 goto done;
2790
2791 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
2792 ret = sd_start_stop_device(sdkp, 1);
2793
2794done:
2795 scsi_disk_put(sdkp);
2796 return ret;
2797}
2798
2799/**
2800 * init_sd - entry point for this driver (both when built in or when
2801 * a module).
2802 *
2803 * Note: this function registers this driver with the scsi mid-level.
2804 **/
2805static int __init init_sd(void)
2806{
2807 int majors = 0, i, err;
2808
2809 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
2810
2811 for (i = 0; i < SD_MAJORS; i++)
2812 if (register_blkdev(sd_major(i), "sd") == 0)
2813 majors++;
2814
2815 if (!majors)
2816 return -ENODEV;
2817
2818 err = class_register(&sd_disk_class);
2819 if (err)
2820 goto err_out;
2821
2822 err = scsi_register_driver(&sd_template.gendrv);
2823 if (err)
2824 goto err_out_class;
2825
2826 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
2827 0, 0, NULL);
2828 if (!sd_cdb_cache) {
2829 printk(KERN_ERR "sd: can't init extended cdb cache\n");
2830 goto err_out_class;
2831 }
2832
2833 sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
2834 if (!sd_cdb_pool) {
2835 printk(KERN_ERR "sd: can't init extended cdb pool\n");
2836 goto err_out_cache;
2837 }
2838
2839 return 0;
2840
2841err_out_cache:
2842 kmem_cache_destroy(sd_cdb_cache);
2843
2844err_out_class:
2845 class_unregister(&sd_disk_class);
2846err_out:
2847 for (i = 0; i < SD_MAJORS; i++)
2848 unregister_blkdev(sd_major(i), "sd");
2849 return err;
2850}
2851
2852/**
2853 * exit_sd - exit point for this driver (when it is a module).
2854 *
2855 * Note: this function unregisters this driver from the scsi mid-level.
2856 **/
2857static void __exit exit_sd(void)
2858{
2859 int i;
2860
2861 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
2862
2863 mempool_destroy(sd_cdb_pool);
2864 kmem_cache_destroy(sd_cdb_cache);
2865
2866 scsi_unregister_driver(&sd_template.gendrv);
2867 class_unregister(&sd_disk_class);
2868
2869 for (i = 0; i < SD_MAJORS; i++)
2870 unregister_blkdev(sd_major(i), "sd");
2871}
2872
2873module_init(init_sd);
2874module_exit(exit_sd);
2875
2876static void sd_print_sense_hdr(struct scsi_disk *sdkp,
2877 struct scsi_sense_hdr *sshdr)
2878{
2879 sd_printk(KERN_INFO, sdkp, " ");
2880 scsi_show_sense_hdr(sshdr);
2881 sd_printk(KERN_INFO, sdkp, " ");
2882 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
2883}
2884
2885static void sd_print_result(struct scsi_disk *sdkp, int result)
2886{
2887 sd_printk(KERN_INFO, sdkp, " ");
2888 scsi_show_result(result);
2889}
2890
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * sd.c Copyright (C) 1992 Drew Eckhardt
4 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 *
6 * Linux scsi disk driver
7 * Initial versions: Drew Eckhardt
8 * Subsequent revisions: Eric Youngdale
9 * Modification history:
10 * - Drew Eckhardt <drew@colorado.edu> original
11 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
12 * outstanding request, and other enhancements.
13 * Support loadable low-level scsi drivers.
14 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
15 * eight major numbers.
16 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
17 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
18 * sd_init and cleanups.
19 * - Alex Davis <letmein@erols.com> Fix problem where partition info
20 * not being read in sd_open. Fix problem where removable media
21 * could be ejected after sd_open.
22 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
23 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
24 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
25 * Support 32k/1M disks.
26 *
27 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
28 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
29 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
30 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
31 * - entering other commands: SCSI_LOG_HLQUEUE level 3
32 * Note: when the logging level is set by the user, it must be greater
33 * than the level indicated above to trigger output.
34 */
35
36#include <linux/bio-integrity.h>
37#include <linux/module.h>
38#include <linux/fs.h>
39#include <linux/kernel.h>
40#include <linux/mm.h>
41#include <linux/hdreg.h>
42#include <linux/errno.h>
43#include <linux/idr.h>
44#include <linux/interrupt.h>
45#include <linux/init.h>
46#include <linux/blkdev.h>
47#include <linux/blkpg.h>
48#include <linux/blk-pm.h>
49#include <linux/delay.h>
50#include <linux/rw_hint.h>
51#include <linux/major.h>
52#include <linux/mutex.h>
53#include <linux/string_helpers.h>
54#include <linux/slab.h>
55#include <linux/sed-opal.h>
56#include <linux/pm_runtime.h>
57#include <linux/pr.h>
58#include <linux/t10-pi.h>
59#include <linux/uaccess.h>
60#include <linux/unaligned.h>
61
62#include <scsi/scsi.h>
63#include <scsi/scsi_cmnd.h>
64#include <scsi/scsi_dbg.h>
65#include <scsi/scsi_device.h>
66#include <scsi/scsi_devinfo.h>
67#include <scsi/scsi_driver.h>
68#include <scsi/scsi_eh.h>
69#include <scsi/scsi_host.h>
70#include <scsi/scsi_ioctl.h>
71#include <scsi/scsicam.h>
72#include <scsi/scsi_common.h>
73
74#include "sd.h"
75#include "scsi_priv.h"
76#include "scsi_logging.h"
77
78MODULE_AUTHOR("Eric Youngdale");
79MODULE_DESCRIPTION("SCSI disk (sd) driver");
80MODULE_LICENSE("GPL");
81
82MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
83MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
84MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
85MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
86MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
87MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
88MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
89MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
90MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
91MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
92MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
93MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
94MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
95MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
96MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
97MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
98MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
99MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
100MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
101MODULE_ALIAS_SCSI_DEVICE(TYPE_ZBC);
102
103#define SD_MINORS 16
104
105static void sd_config_discard(struct scsi_disk *sdkp, struct queue_limits *lim,
106 unsigned int mode);
107static void sd_config_write_same(struct scsi_disk *sdkp,
108 struct queue_limits *lim);
109static int sd_revalidate_disk(struct gendisk *);
110static void sd_unlock_native_capacity(struct gendisk *disk);
111static void sd_shutdown(struct device *);
112static void scsi_disk_release(struct device *cdev);
113
114static DEFINE_IDA(sd_index_ida);
115
116static mempool_t *sd_page_pool;
117static struct lock_class_key sd_bio_compl_lkclass;
118
119static const char *sd_cache_types[] = {
120 "write through", "none", "write back",
121 "write back, no read (daft)"
122};
123
124static void sd_set_flush_flag(struct scsi_disk *sdkp,
125 struct queue_limits *lim)
126{
127 if (sdkp->WCE) {
128 lim->features |= BLK_FEAT_WRITE_CACHE;
129 if (sdkp->DPOFUA)
130 lim->features |= BLK_FEAT_FUA;
131 else
132 lim->features &= ~BLK_FEAT_FUA;
133 } else {
134 lim->features &= ~(BLK_FEAT_WRITE_CACHE | BLK_FEAT_FUA);
135 }
136}
137
138static ssize_t
139cache_type_store(struct device *dev, struct device_attribute *attr,
140 const char *buf, size_t count)
141{
142 int ct, rcd, wce, sp;
143 struct scsi_disk *sdkp = to_scsi_disk(dev);
144 struct scsi_device *sdp = sdkp->device;
145 char buffer[64];
146 char *buffer_data;
147 struct scsi_mode_data data;
148 struct scsi_sense_hdr sshdr;
149 static const char temp[] = "temporary ";
150 int len, ret;
151
152 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
153 /* no cache control on RBC devices; theoretically they
154 * can do it, but there's probably so many exceptions
155 * it's not worth the risk */
156 return -EINVAL;
157
158 if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
159 buf += sizeof(temp) - 1;
160 sdkp->cache_override = 1;
161 } else {
162 sdkp->cache_override = 0;
163 }
164
165 ct = sysfs_match_string(sd_cache_types, buf);
166 if (ct < 0)
167 return -EINVAL;
168
169 rcd = ct & 0x01 ? 1 : 0;
170 wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0;
171
172 if (sdkp->cache_override) {
173 struct queue_limits lim;
174
175 sdkp->WCE = wce;
176 sdkp->RCD = rcd;
177
178 lim = queue_limits_start_update(sdkp->disk->queue);
179 sd_set_flush_flag(sdkp, &lim);
180 ret = queue_limits_commit_update_frozen(sdkp->disk->queue,
181 &lim);
182 if (ret)
183 return ret;
184 return count;
185 }
186
187 if (scsi_mode_sense(sdp, 0x08, 8, 0, buffer, sizeof(buffer), SD_TIMEOUT,
188 sdkp->max_retries, &data, NULL))
189 return -EINVAL;
190 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
191 data.block_descriptor_length);
192 buffer_data = buffer + data.header_length +
193 data.block_descriptor_length;
194 buffer_data[2] &= ~0x05;
195 buffer_data[2] |= wce << 2 | rcd;
196 sp = buffer_data[0] & 0x80 ? 1 : 0;
197 buffer_data[0] &= ~0x80;
198
199 /*
200 * Ensure WP, DPOFUA, and RESERVED fields are cleared in
201 * received mode parameter buffer before doing MODE SELECT.
202 */
203 data.device_specific = 0;
204
205 ret = scsi_mode_select(sdp, 1, sp, buffer_data, len, SD_TIMEOUT,
206 sdkp->max_retries, &data, &sshdr);
207 if (ret) {
208 if (ret > 0 && scsi_sense_valid(&sshdr))
209 sd_print_sense_hdr(sdkp, &sshdr);
210 return -EINVAL;
211 }
212 sd_revalidate_disk(sdkp->disk);
213 return count;
214}
215
216static ssize_t
217manage_start_stop_show(struct device *dev,
218 struct device_attribute *attr, char *buf)
219{
220 struct scsi_disk *sdkp = to_scsi_disk(dev);
221 struct scsi_device *sdp = sdkp->device;
222
223 return sysfs_emit(buf, "%u\n",
224 sdp->manage_system_start_stop &&
225 sdp->manage_runtime_start_stop &&
226 sdp->manage_shutdown);
227}
228static DEVICE_ATTR_RO(manage_start_stop);
229
230static ssize_t
231manage_system_start_stop_show(struct device *dev,
232 struct device_attribute *attr, char *buf)
233{
234 struct scsi_disk *sdkp = to_scsi_disk(dev);
235 struct scsi_device *sdp = sdkp->device;
236
237 return sysfs_emit(buf, "%u\n", sdp->manage_system_start_stop);
238}
239
240static ssize_t
241manage_system_start_stop_store(struct device *dev,
242 struct device_attribute *attr,
243 const char *buf, size_t count)
244{
245 struct scsi_disk *sdkp = to_scsi_disk(dev);
246 struct scsi_device *sdp = sdkp->device;
247 bool v;
248
249 if (!capable(CAP_SYS_ADMIN))
250 return -EACCES;
251
252 if (kstrtobool(buf, &v))
253 return -EINVAL;
254
255 sdp->manage_system_start_stop = v;
256
257 return count;
258}
259static DEVICE_ATTR_RW(manage_system_start_stop);
260
261static ssize_t
262manage_runtime_start_stop_show(struct device *dev,
263 struct device_attribute *attr, char *buf)
264{
265 struct scsi_disk *sdkp = to_scsi_disk(dev);
266 struct scsi_device *sdp = sdkp->device;
267
268 return sysfs_emit(buf, "%u\n", sdp->manage_runtime_start_stop);
269}
270
271static ssize_t
272manage_runtime_start_stop_store(struct device *dev,
273 struct device_attribute *attr,
274 const char *buf, size_t count)
275{
276 struct scsi_disk *sdkp = to_scsi_disk(dev);
277 struct scsi_device *sdp = sdkp->device;
278 bool v;
279
280 if (!capable(CAP_SYS_ADMIN))
281 return -EACCES;
282
283 if (kstrtobool(buf, &v))
284 return -EINVAL;
285
286 sdp->manage_runtime_start_stop = v;
287
288 return count;
289}
290static DEVICE_ATTR_RW(manage_runtime_start_stop);
291
292static ssize_t manage_shutdown_show(struct device *dev,
293 struct device_attribute *attr, char *buf)
294{
295 struct scsi_disk *sdkp = to_scsi_disk(dev);
296 struct scsi_device *sdp = sdkp->device;
297
298 return sysfs_emit(buf, "%u\n", sdp->manage_shutdown);
299}
300
301static ssize_t manage_shutdown_store(struct device *dev,
302 struct device_attribute *attr,
303 const char *buf, size_t count)
304{
305 struct scsi_disk *sdkp = to_scsi_disk(dev);
306 struct scsi_device *sdp = sdkp->device;
307 bool v;
308
309 if (!capable(CAP_SYS_ADMIN))
310 return -EACCES;
311
312 if (kstrtobool(buf, &v))
313 return -EINVAL;
314
315 sdp->manage_shutdown = v;
316
317 return count;
318}
319static DEVICE_ATTR_RW(manage_shutdown);
320
321static ssize_t
322allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
323{
324 struct scsi_disk *sdkp = to_scsi_disk(dev);
325
326 return sprintf(buf, "%u\n", sdkp->device->allow_restart);
327}
328
329static ssize_t
330allow_restart_store(struct device *dev, struct device_attribute *attr,
331 const char *buf, size_t count)
332{
333 bool v;
334 struct scsi_disk *sdkp = to_scsi_disk(dev);
335 struct scsi_device *sdp = sdkp->device;
336
337 if (!capable(CAP_SYS_ADMIN))
338 return -EACCES;
339
340 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
341 return -EINVAL;
342
343 if (kstrtobool(buf, &v))
344 return -EINVAL;
345
346 sdp->allow_restart = v;
347
348 return count;
349}
350static DEVICE_ATTR_RW(allow_restart);
351
352static ssize_t
353cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
354{
355 struct scsi_disk *sdkp = to_scsi_disk(dev);
356 int ct = sdkp->RCD + 2*sdkp->WCE;
357
358 return sprintf(buf, "%s\n", sd_cache_types[ct]);
359}
360static DEVICE_ATTR_RW(cache_type);
361
362static ssize_t
363FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
364{
365 struct scsi_disk *sdkp = to_scsi_disk(dev);
366
367 return sprintf(buf, "%u\n", sdkp->DPOFUA);
368}
369static DEVICE_ATTR_RO(FUA);
370
371static ssize_t
372protection_type_show(struct device *dev, struct device_attribute *attr,
373 char *buf)
374{
375 struct scsi_disk *sdkp = to_scsi_disk(dev);
376
377 return sprintf(buf, "%u\n", sdkp->protection_type);
378}
379
380static ssize_t
381protection_type_store(struct device *dev, struct device_attribute *attr,
382 const char *buf, size_t count)
383{
384 struct scsi_disk *sdkp = to_scsi_disk(dev);
385 unsigned int val;
386 int err;
387
388 if (!capable(CAP_SYS_ADMIN))
389 return -EACCES;
390
391 err = kstrtouint(buf, 10, &val);
392
393 if (err)
394 return err;
395
396 if (val <= T10_PI_TYPE3_PROTECTION)
397 sdkp->protection_type = val;
398
399 return count;
400}
401static DEVICE_ATTR_RW(protection_type);
402
403static ssize_t
404protection_mode_show(struct device *dev, struct device_attribute *attr,
405 char *buf)
406{
407 struct scsi_disk *sdkp = to_scsi_disk(dev);
408 struct scsi_device *sdp = sdkp->device;
409 unsigned int dif, dix;
410
411 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
412 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
413
414 if (!dix && scsi_host_dix_capable(sdp->host, T10_PI_TYPE0_PROTECTION)) {
415 dif = 0;
416 dix = 1;
417 }
418
419 if (!dif && !dix)
420 return sprintf(buf, "none\n");
421
422 return sprintf(buf, "%s%u\n", dix ? "dix" : "dif", dif);
423}
424static DEVICE_ATTR_RO(protection_mode);
425
426static ssize_t
427app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
428{
429 struct scsi_disk *sdkp = to_scsi_disk(dev);
430
431 return sprintf(buf, "%u\n", sdkp->ATO);
432}
433static DEVICE_ATTR_RO(app_tag_own);
434
435static ssize_t
436thin_provisioning_show(struct device *dev, struct device_attribute *attr,
437 char *buf)
438{
439 struct scsi_disk *sdkp = to_scsi_disk(dev);
440
441 return sprintf(buf, "%u\n", sdkp->lbpme);
442}
443static DEVICE_ATTR_RO(thin_provisioning);
444
445/* sysfs_match_string() requires dense arrays */
446static const char *lbp_mode[] = {
447 [SD_LBP_FULL] = "full",
448 [SD_LBP_UNMAP] = "unmap",
449 [SD_LBP_WS16] = "writesame_16",
450 [SD_LBP_WS10] = "writesame_10",
451 [SD_LBP_ZERO] = "writesame_zero",
452 [SD_LBP_DISABLE] = "disabled",
453};
454
455static ssize_t
456provisioning_mode_show(struct device *dev, struct device_attribute *attr,
457 char *buf)
458{
459 struct scsi_disk *sdkp = to_scsi_disk(dev);
460
461 return sprintf(buf, "%s\n", lbp_mode[sdkp->provisioning_mode]);
462}
463
464static ssize_t
465provisioning_mode_store(struct device *dev, struct device_attribute *attr,
466 const char *buf, size_t count)
467{
468 struct scsi_disk *sdkp = to_scsi_disk(dev);
469 struct scsi_device *sdp = sdkp->device;
470 struct queue_limits lim;
471 int mode, err;
472
473 if (!capable(CAP_SYS_ADMIN))
474 return -EACCES;
475
476 if (sdp->type != TYPE_DISK)
477 return -EINVAL;
478
479 mode = sysfs_match_string(lbp_mode, buf);
480 if (mode < 0)
481 return -EINVAL;
482
483 lim = queue_limits_start_update(sdkp->disk->queue);
484 sd_config_discard(sdkp, &lim, mode);
485 err = queue_limits_commit_update_frozen(sdkp->disk->queue, &lim);
486 if (err)
487 return err;
488 return count;
489}
490static DEVICE_ATTR_RW(provisioning_mode);
491
492/* sysfs_match_string() requires dense arrays */
493static const char *zeroing_mode[] = {
494 [SD_ZERO_WRITE] = "write",
495 [SD_ZERO_WS] = "writesame",
496 [SD_ZERO_WS16_UNMAP] = "writesame_16_unmap",
497 [SD_ZERO_WS10_UNMAP] = "writesame_10_unmap",
498};
499
500static ssize_t
501zeroing_mode_show(struct device *dev, struct device_attribute *attr,
502 char *buf)
503{
504 struct scsi_disk *sdkp = to_scsi_disk(dev);
505
506 return sprintf(buf, "%s\n", zeroing_mode[sdkp->zeroing_mode]);
507}
508
509static ssize_t
510zeroing_mode_store(struct device *dev, struct device_attribute *attr,
511 const char *buf, size_t count)
512{
513 struct scsi_disk *sdkp = to_scsi_disk(dev);
514 int mode;
515
516 if (!capable(CAP_SYS_ADMIN))
517 return -EACCES;
518
519 mode = sysfs_match_string(zeroing_mode, buf);
520 if (mode < 0)
521 return -EINVAL;
522
523 sdkp->zeroing_mode = mode;
524
525 return count;
526}
527static DEVICE_ATTR_RW(zeroing_mode);
528
529static ssize_t
530max_medium_access_timeouts_show(struct device *dev,
531 struct device_attribute *attr, char *buf)
532{
533 struct scsi_disk *sdkp = to_scsi_disk(dev);
534
535 return sprintf(buf, "%u\n", sdkp->max_medium_access_timeouts);
536}
537
538static ssize_t
539max_medium_access_timeouts_store(struct device *dev,
540 struct device_attribute *attr, const char *buf,
541 size_t count)
542{
543 struct scsi_disk *sdkp = to_scsi_disk(dev);
544 int err;
545
546 if (!capable(CAP_SYS_ADMIN))
547 return -EACCES;
548
549 err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
550
551 return err ? err : count;
552}
553static DEVICE_ATTR_RW(max_medium_access_timeouts);
554
555static ssize_t
556max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
557 char *buf)
558{
559 struct scsi_disk *sdkp = to_scsi_disk(dev);
560
561 return sprintf(buf, "%u\n", sdkp->max_ws_blocks);
562}
563
564static ssize_t
565max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
566 const char *buf, size_t count)
567{
568 struct scsi_disk *sdkp = to_scsi_disk(dev);
569 struct scsi_device *sdp = sdkp->device;
570 struct queue_limits lim;
571 unsigned long max;
572 int err;
573
574 if (!capable(CAP_SYS_ADMIN))
575 return -EACCES;
576
577 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
578 return -EINVAL;
579
580 err = kstrtoul(buf, 10, &max);
581
582 if (err)
583 return err;
584
585 if (max == 0)
586 sdp->no_write_same = 1;
587 else if (max <= SD_MAX_WS16_BLOCKS) {
588 sdp->no_write_same = 0;
589 sdkp->max_ws_blocks = max;
590 }
591
592 lim = queue_limits_start_update(sdkp->disk->queue);
593 sd_config_write_same(sdkp, &lim);
594 err = queue_limits_commit_update_frozen(sdkp->disk->queue, &lim);
595 if (err)
596 return err;
597 return count;
598}
599static DEVICE_ATTR_RW(max_write_same_blocks);
600
601static ssize_t
602zoned_cap_show(struct device *dev, struct device_attribute *attr, char *buf)
603{
604 struct scsi_disk *sdkp = to_scsi_disk(dev);
605
606 if (sdkp->device->type == TYPE_ZBC)
607 return sprintf(buf, "host-managed\n");
608 if (sdkp->zoned == 1)
609 return sprintf(buf, "host-aware\n");
610 if (sdkp->zoned == 2)
611 return sprintf(buf, "drive-managed\n");
612 return sprintf(buf, "none\n");
613}
614static DEVICE_ATTR_RO(zoned_cap);
615
616static ssize_t
617max_retries_store(struct device *dev, struct device_attribute *attr,
618 const char *buf, size_t count)
619{
620 struct scsi_disk *sdkp = to_scsi_disk(dev);
621 struct scsi_device *sdev = sdkp->device;
622 int retries, err;
623
624 err = kstrtoint(buf, 10, &retries);
625 if (err)
626 return err;
627
628 if (retries == SCSI_CMD_RETRIES_NO_LIMIT || retries <= SD_MAX_RETRIES) {
629 sdkp->max_retries = retries;
630 return count;
631 }
632
633 sdev_printk(KERN_ERR, sdev, "max_retries must be between -1 and %d\n",
634 SD_MAX_RETRIES);
635 return -EINVAL;
636}
637
638static ssize_t
639max_retries_show(struct device *dev, struct device_attribute *attr,
640 char *buf)
641{
642 struct scsi_disk *sdkp = to_scsi_disk(dev);
643
644 return sprintf(buf, "%d\n", sdkp->max_retries);
645}
646
647static DEVICE_ATTR_RW(max_retries);
648
649static struct attribute *sd_disk_attrs[] = {
650 &dev_attr_cache_type.attr,
651 &dev_attr_FUA.attr,
652 &dev_attr_allow_restart.attr,
653 &dev_attr_manage_start_stop.attr,
654 &dev_attr_manage_system_start_stop.attr,
655 &dev_attr_manage_runtime_start_stop.attr,
656 &dev_attr_manage_shutdown.attr,
657 &dev_attr_protection_type.attr,
658 &dev_attr_protection_mode.attr,
659 &dev_attr_app_tag_own.attr,
660 &dev_attr_thin_provisioning.attr,
661 &dev_attr_provisioning_mode.attr,
662 &dev_attr_zeroing_mode.attr,
663 &dev_attr_max_write_same_blocks.attr,
664 &dev_attr_max_medium_access_timeouts.attr,
665 &dev_attr_zoned_cap.attr,
666 &dev_attr_max_retries.attr,
667 NULL,
668};
669ATTRIBUTE_GROUPS(sd_disk);
670
671static struct class sd_disk_class = {
672 .name = "scsi_disk",
673 .dev_release = scsi_disk_release,
674 .dev_groups = sd_disk_groups,
675};
676
677/*
678 * Don't request a new module, as that could deadlock in multipath
679 * environment.
680 */
681static void sd_default_probe(dev_t devt)
682{
683}
684
685/*
686 * Device no to disk mapping:
687 *
688 * major disc2 disc p1
689 * |............|.............|....|....| <- dev_t
690 * 31 20 19 8 7 4 3 0
691 *
692 * Inside a major, we have 16k disks, however mapped non-
693 * contiguously. The first 16 disks are for major0, the next
694 * ones with major1, ... Disk 256 is for major0 again, disk 272
695 * for major1, ...
696 * As we stay compatible with our numbering scheme, we can reuse
697 * the well-know SCSI majors 8, 65--71, 136--143.
698 */
699static int sd_major(int major_idx)
700{
701 switch (major_idx) {
702 case 0:
703 return SCSI_DISK0_MAJOR;
704 case 1 ... 7:
705 return SCSI_DISK1_MAJOR + major_idx - 1;
706 case 8 ... 15:
707 return SCSI_DISK8_MAJOR + major_idx - 8;
708 default:
709 BUG();
710 return 0; /* shut up gcc */
711 }
712}
713
714#ifdef CONFIG_BLK_SED_OPAL
715static int sd_sec_submit(void *data, u16 spsp, u8 secp, void *buffer,
716 size_t len, bool send)
717{
718 struct scsi_disk *sdkp = data;
719 struct scsi_device *sdev = sdkp->device;
720 u8 cdb[12] = { 0, };
721 const struct scsi_exec_args exec_args = {
722 .req_flags = BLK_MQ_REQ_PM,
723 };
724 int ret;
725
726 cdb[0] = send ? SECURITY_PROTOCOL_OUT : SECURITY_PROTOCOL_IN;
727 cdb[1] = secp;
728 put_unaligned_be16(spsp, &cdb[2]);
729 put_unaligned_be32(len, &cdb[6]);
730
731 ret = scsi_execute_cmd(sdev, cdb, send ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
732 buffer, len, SD_TIMEOUT, sdkp->max_retries,
733 &exec_args);
734 return ret <= 0 ? ret : -EIO;
735}
736#endif /* CONFIG_BLK_SED_OPAL */
737
738/*
739 * Look up the DIX operation based on whether the command is read or
740 * write and whether dix and dif are enabled.
741 */
742static unsigned int sd_prot_op(bool write, bool dix, bool dif)
743{
744 /* Lookup table: bit 2 (write), bit 1 (dix), bit 0 (dif) */
745 static const unsigned int ops[] = { /* wrt dix dif */
746 SCSI_PROT_NORMAL, /* 0 0 0 */
747 SCSI_PROT_READ_STRIP, /* 0 0 1 */
748 SCSI_PROT_READ_INSERT, /* 0 1 0 */
749 SCSI_PROT_READ_PASS, /* 0 1 1 */
750 SCSI_PROT_NORMAL, /* 1 0 0 */
751 SCSI_PROT_WRITE_INSERT, /* 1 0 1 */
752 SCSI_PROT_WRITE_STRIP, /* 1 1 0 */
753 SCSI_PROT_WRITE_PASS, /* 1 1 1 */
754 };
755
756 return ops[write << 2 | dix << 1 | dif];
757}
758
759/*
760 * Returns a mask of the protection flags that are valid for a given DIX
761 * operation.
762 */
763static unsigned int sd_prot_flag_mask(unsigned int prot_op)
764{
765 static const unsigned int flag_mask[] = {
766 [SCSI_PROT_NORMAL] = 0,
767
768 [SCSI_PROT_READ_STRIP] = SCSI_PROT_TRANSFER_PI |
769 SCSI_PROT_GUARD_CHECK |
770 SCSI_PROT_REF_CHECK |
771 SCSI_PROT_REF_INCREMENT,
772
773 [SCSI_PROT_READ_INSERT] = SCSI_PROT_REF_INCREMENT |
774 SCSI_PROT_IP_CHECKSUM,
775
776 [SCSI_PROT_READ_PASS] = SCSI_PROT_TRANSFER_PI |
777 SCSI_PROT_GUARD_CHECK |
778 SCSI_PROT_REF_CHECK |
779 SCSI_PROT_REF_INCREMENT |
780 SCSI_PROT_IP_CHECKSUM,
781
782 [SCSI_PROT_WRITE_INSERT] = SCSI_PROT_TRANSFER_PI |
783 SCSI_PROT_REF_INCREMENT,
784
785 [SCSI_PROT_WRITE_STRIP] = SCSI_PROT_GUARD_CHECK |
786 SCSI_PROT_REF_CHECK |
787 SCSI_PROT_REF_INCREMENT |
788 SCSI_PROT_IP_CHECKSUM,
789
790 [SCSI_PROT_WRITE_PASS] = SCSI_PROT_TRANSFER_PI |
791 SCSI_PROT_GUARD_CHECK |
792 SCSI_PROT_REF_CHECK |
793 SCSI_PROT_REF_INCREMENT |
794 SCSI_PROT_IP_CHECKSUM,
795 };
796
797 return flag_mask[prot_op];
798}
799
800static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
801 unsigned int dix, unsigned int dif)
802{
803 struct request *rq = scsi_cmd_to_rq(scmd);
804 struct bio *bio = rq->bio;
805 unsigned int prot_op = sd_prot_op(rq_data_dir(rq), dix, dif);
806 unsigned int protect = 0;
807
808 if (dix) { /* DIX Type 0, 1, 2, 3 */
809 if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
810 scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
811
812 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
813 scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
814 }
815
816 if (dif != T10_PI_TYPE3_PROTECTION) { /* DIX/DIF Type 0, 1, 2 */
817 scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
818
819 if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
820 scmd->prot_flags |= SCSI_PROT_REF_CHECK;
821 }
822
823 if (dif) { /* DIX/DIF Type 1, 2, 3 */
824 scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
825
826 if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
827 protect = 3 << 5; /* Disable target PI checking */
828 else
829 protect = 1 << 5; /* Enable target PI checking */
830 }
831
832 scsi_set_prot_op(scmd, prot_op);
833 scsi_set_prot_type(scmd, dif);
834 scmd->prot_flags &= sd_prot_flag_mask(prot_op);
835
836 return protect;
837}
838
839static void sd_disable_discard(struct scsi_disk *sdkp)
840{
841 sdkp->provisioning_mode = SD_LBP_DISABLE;
842 blk_queue_disable_discard(sdkp->disk->queue);
843}
844
845static void sd_config_discard(struct scsi_disk *sdkp, struct queue_limits *lim,
846 unsigned int mode)
847{
848 unsigned int logical_block_size = sdkp->device->sector_size;
849 unsigned int max_blocks = 0;
850
851 lim->discard_alignment = sdkp->unmap_alignment * logical_block_size;
852 lim->discard_granularity = max(sdkp->physical_block_size,
853 sdkp->unmap_granularity * logical_block_size);
854 sdkp->provisioning_mode = mode;
855
856 switch (mode) {
857
858 case SD_LBP_FULL:
859 case SD_LBP_DISABLE:
860 break;
861
862 case SD_LBP_UNMAP:
863 max_blocks = min_not_zero(sdkp->max_unmap_blocks,
864 (u32)SD_MAX_WS16_BLOCKS);
865 break;
866
867 case SD_LBP_WS16:
868 if (sdkp->device->unmap_limit_for_ws)
869 max_blocks = sdkp->max_unmap_blocks;
870 else
871 max_blocks = sdkp->max_ws_blocks;
872
873 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS16_BLOCKS);
874 break;
875
876 case SD_LBP_WS10:
877 if (sdkp->device->unmap_limit_for_ws)
878 max_blocks = sdkp->max_unmap_blocks;
879 else
880 max_blocks = sdkp->max_ws_blocks;
881
882 max_blocks = min_not_zero(max_blocks, (u32)SD_MAX_WS10_BLOCKS);
883 break;
884
885 case SD_LBP_ZERO:
886 max_blocks = min_not_zero(sdkp->max_ws_blocks,
887 (u32)SD_MAX_WS10_BLOCKS);
888 break;
889 }
890
891 lim->max_hw_discard_sectors = max_blocks *
892 (logical_block_size >> SECTOR_SHIFT);
893}
894
895static void *sd_set_special_bvec(struct request *rq, unsigned int data_len)
896{
897 struct page *page;
898
899 page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
900 if (!page)
901 return NULL;
902 clear_highpage(page);
903 bvec_set_page(&rq->special_vec, page, data_len, 0);
904 rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
905 return bvec_virt(&rq->special_vec);
906}
907
908static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
909{
910 struct scsi_device *sdp = cmd->device;
911 struct request *rq = scsi_cmd_to_rq(cmd);
912 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
913 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
914 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
915 unsigned int data_len = 24;
916 char *buf;
917
918 buf = sd_set_special_bvec(rq, data_len);
919 if (!buf)
920 return BLK_STS_RESOURCE;
921
922 cmd->cmd_len = 10;
923 cmd->cmnd[0] = UNMAP;
924 cmd->cmnd[8] = 24;
925
926 put_unaligned_be16(6 + 16, &buf[0]);
927 put_unaligned_be16(16, &buf[2]);
928 put_unaligned_be64(lba, &buf[8]);
929 put_unaligned_be32(nr_blocks, &buf[16]);
930
931 cmd->allowed = sdkp->max_retries;
932 cmd->transfersize = data_len;
933 rq->timeout = SD_TIMEOUT;
934
935 return scsi_alloc_sgtables(cmd);
936}
937
938static void sd_config_atomic(struct scsi_disk *sdkp, struct queue_limits *lim)
939{
940 unsigned int logical_block_size = sdkp->device->sector_size,
941 physical_block_size_sectors, max_atomic, unit_min, unit_max;
942
943 if ((!sdkp->max_atomic && !sdkp->max_atomic_with_boundary) ||
944 sdkp->protection_type == T10_PI_TYPE2_PROTECTION)
945 return;
946
947 physical_block_size_sectors = sdkp->physical_block_size /
948 sdkp->device->sector_size;
949
950 unit_min = rounddown_pow_of_two(sdkp->atomic_granularity ?
951 sdkp->atomic_granularity :
952 physical_block_size_sectors);
953
954 /*
955 * Only use atomic boundary when we have the odd scenario of
956 * sdkp->max_atomic == 0, which the spec does permit.
957 */
958 if (sdkp->max_atomic) {
959 max_atomic = sdkp->max_atomic;
960 unit_max = rounddown_pow_of_two(sdkp->max_atomic);
961 sdkp->use_atomic_write_boundary = 0;
962 } else {
963 max_atomic = sdkp->max_atomic_with_boundary;
964 unit_max = rounddown_pow_of_two(sdkp->max_atomic_boundary);
965 sdkp->use_atomic_write_boundary = 1;
966 }
967
968 /*
969 * Ensure compliance with granularity and alignment. For now, keep it
970 * simple and just don't support atomic writes for values mismatched
971 * with max_{boundary}atomic, physical block size, and
972 * atomic_granularity itself.
973 *
974 * We're really being distrustful by checking unit_max also...
975 */
976 if (sdkp->atomic_granularity > 1) {
977 if (unit_min > 1 && unit_min % sdkp->atomic_granularity)
978 return;
979 if (unit_max > 1 && unit_max % sdkp->atomic_granularity)
980 return;
981 }
982
983 if (sdkp->atomic_alignment > 1) {
984 if (unit_min > 1 && unit_min % sdkp->atomic_alignment)
985 return;
986 if (unit_max > 1 && unit_max % sdkp->atomic_alignment)
987 return;
988 }
989
990 lim->atomic_write_hw_max = max_atomic * logical_block_size;
991 lim->atomic_write_hw_boundary = 0;
992 lim->atomic_write_hw_unit_min = unit_min * logical_block_size;
993 lim->atomic_write_hw_unit_max = unit_max * logical_block_size;
994}
995
996static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
997 bool unmap)
998{
999 struct scsi_device *sdp = cmd->device;
1000 struct request *rq = scsi_cmd_to_rq(cmd);
1001 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1002 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
1003 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
1004 u32 data_len = sdp->sector_size;
1005
1006 if (!sd_set_special_bvec(rq, data_len))
1007 return BLK_STS_RESOURCE;
1008
1009 cmd->cmd_len = 16;
1010 cmd->cmnd[0] = WRITE_SAME_16;
1011 if (unmap)
1012 cmd->cmnd[1] = 0x8; /* UNMAP */
1013 put_unaligned_be64(lba, &cmd->cmnd[2]);
1014 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
1015
1016 cmd->allowed = sdkp->max_retries;
1017 cmd->transfersize = data_len;
1018 rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
1019
1020 return scsi_alloc_sgtables(cmd);
1021}
1022
1023static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
1024 bool unmap)
1025{
1026 struct scsi_device *sdp = cmd->device;
1027 struct request *rq = scsi_cmd_to_rq(cmd);
1028 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1029 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
1030 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
1031 u32 data_len = sdp->sector_size;
1032
1033 if (!sd_set_special_bvec(rq, data_len))
1034 return BLK_STS_RESOURCE;
1035
1036 cmd->cmd_len = 10;
1037 cmd->cmnd[0] = WRITE_SAME;
1038 if (unmap)
1039 cmd->cmnd[1] = 0x8; /* UNMAP */
1040 put_unaligned_be32(lba, &cmd->cmnd[2]);
1041 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
1042
1043 cmd->allowed = sdkp->max_retries;
1044 cmd->transfersize = data_len;
1045 rq->timeout = unmap ? SD_TIMEOUT : SD_WRITE_SAME_TIMEOUT;
1046
1047 return scsi_alloc_sgtables(cmd);
1048}
1049
1050static blk_status_t sd_setup_write_zeroes_cmnd(struct scsi_cmnd *cmd)
1051{
1052 struct request *rq = scsi_cmd_to_rq(cmd);
1053 struct scsi_device *sdp = cmd->device;
1054 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1055 u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
1056 u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
1057
1058 if (!(rq->cmd_flags & REQ_NOUNMAP)) {
1059 switch (sdkp->zeroing_mode) {
1060 case SD_ZERO_WS16_UNMAP:
1061 return sd_setup_write_same16_cmnd(cmd, true);
1062 case SD_ZERO_WS10_UNMAP:
1063 return sd_setup_write_same10_cmnd(cmd, true);
1064 }
1065 }
1066
1067 if (sdp->no_write_same) {
1068 rq->rq_flags |= RQF_QUIET;
1069 return BLK_STS_TARGET;
1070 }
1071
1072 if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff)
1073 return sd_setup_write_same16_cmnd(cmd, false);
1074
1075 return sd_setup_write_same10_cmnd(cmd, false);
1076}
1077
1078static void sd_disable_write_same(struct scsi_disk *sdkp)
1079{
1080 sdkp->device->no_write_same = 1;
1081 sdkp->max_ws_blocks = 0;
1082 blk_queue_disable_write_zeroes(sdkp->disk->queue);
1083}
1084
1085static void sd_config_write_same(struct scsi_disk *sdkp,
1086 struct queue_limits *lim)
1087{
1088 unsigned int logical_block_size = sdkp->device->sector_size;
1089
1090 if (sdkp->device->no_write_same) {
1091 sdkp->max_ws_blocks = 0;
1092 goto out;
1093 }
1094
1095 /* Some devices can not handle block counts above 0xffff despite
1096 * supporting WRITE SAME(16). Consequently we default to 64k
1097 * blocks per I/O unless the device explicitly advertises a
1098 * bigger limit.
1099 */
1100 if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
1101 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
1102 (u32)SD_MAX_WS16_BLOCKS);
1103 else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
1104 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
1105 (u32)SD_MAX_WS10_BLOCKS);
1106 else {
1107 sdkp->device->no_write_same = 1;
1108 sdkp->max_ws_blocks = 0;
1109 }
1110
1111 if (sdkp->lbprz && sdkp->lbpws)
1112 sdkp->zeroing_mode = SD_ZERO_WS16_UNMAP;
1113 else if (sdkp->lbprz && sdkp->lbpws10)
1114 sdkp->zeroing_mode = SD_ZERO_WS10_UNMAP;
1115 else if (sdkp->max_ws_blocks)
1116 sdkp->zeroing_mode = SD_ZERO_WS;
1117 else
1118 sdkp->zeroing_mode = SD_ZERO_WRITE;
1119
1120 if (sdkp->max_ws_blocks &&
1121 sdkp->physical_block_size > logical_block_size) {
1122 /*
1123 * Reporting a maximum number of blocks that is not aligned
1124 * on the device physical size would cause a large write same
1125 * request to be split into physically unaligned chunks by
1126 * __blkdev_issue_write_zeroes() even if the caller of this
1127 * functions took care to align the large request. So make sure
1128 * the maximum reported is aligned to the device physical block
1129 * size. This is only an optional optimization for regular
1130 * disks, but this is mandatory to avoid failure of large write
1131 * same requests directed at sequential write required zones of
1132 * host-managed ZBC disks.
1133 */
1134 sdkp->max_ws_blocks =
1135 round_down(sdkp->max_ws_blocks,
1136 bytes_to_logical(sdkp->device,
1137 sdkp->physical_block_size));
1138 }
1139
1140out:
1141 lim->max_write_zeroes_sectors =
1142 sdkp->max_ws_blocks * (logical_block_size >> SECTOR_SHIFT);
1143}
1144
1145static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
1146{
1147 struct request *rq = scsi_cmd_to_rq(cmd);
1148 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1149
1150 /* flush requests don't perform I/O, zero the S/G table */
1151 memset(&cmd->sdb, 0, sizeof(cmd->sdb));
1152
1153 if (cmd->device->use_16_for_sync) {
1154 cmd->cmnd[0] = SYNCHRONIZE_CACHE_16;
1155 cmd->cmd_len = 16;
1156 } else {
1157 cmd->cmnd[0] = SYNCHRONIZE_CACHE;
1158 cmd->cmd_len = 10;
1159 }
1160 cmd->transfersize = 0;
1161 cmd->allowed = sdkp->max_retries;
1162
1163 rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
1164 return BLK_STS_OK;
1165}
1166
1167/**
1168 * sd_group_number() - Compute the GROUP NUMBER field
1169 * @cmd: SCSI command for which to compute the value of the six-bit GROUP NUMBER
1170 * field.
1171 *
1172 * From SBC-5 r05 (https://www.t10.org/cgi-bin/ac.pl?t=f&f=sbc5r05.pdf):
1173 * 0: no relative lifetime.
1174 * 1: shortest relative lifetime.
1175 * 2: second shortest relative lifetime.
1176 * 3 - 0x3d: intermediate relative lifetimes.
1177 * 0x3e: second longest relative lifetime.
1178 * 0x3f: longest relative lifetime.
1179 */
1180static u8 sd_group_number(struct scsi_cmnd *cmd)
1181{
1182 const struct request *rq = scsi_cmd_to_rq(cmd);
1183 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1184
1185 if (!sdkp->rscs)
1186 return 0;
1187
1188 return min3((u32)rq->bio->bi_write_hint,
1189 (u32)sdkp->permanent_stream_count, 0x3fu);
1190}
1191
1192static blk_status_t sd_setup_rw32_cmnd(struct scsi_cmnd *cmd, bool write,
1193 sector_t lba, unsigned int nr_blocks,
1194 unsigned char flags, unsigned int dld)
1195{
1196 cmd->cmd_len = SD_EXT_CDB_SIZE;
1197 cmd->cmnd[0] = VARIABLE_LENGTH_CMD;
1198 cmd->cmnd[6] = sd_group_number(cmd);
1199 cmd->cmnd[7] = 0x18; /* Additional CDB len */
1200 cmd->cmnd[9] = write ? WRITE_32 : READ_32;
1201 cmd->cmnd[10] = flags;
1202 cmd->cmnd[11] = dld & 0x07;
1203 put_unaligned_be64(lba, &cmd->cmnd[12]);
1204 put_unaligned_be32(lba, &cmd->cmnd[20]); /* Expected Indirect LBA */
1205 put_unaligned_be32(nr_blocks, &cmd->cmnd[28]);
1206
1207 return BLK_STS_OK;
1208}
1209
1210static blk_status_t sd_setup_rw16_cmnd(struct scsi_cmnd *cmd, bool write,
1211 sector_t lba, unsigned int nr_blocks,
1212 unsigned char flags, unsigned int dld)
1213{
1214 cmd->cmd_len = 16;
1215 cmd->cmnd[0] = write ? WRITE_16 : READ_16;
1216 cmd->cmnd[1] = flags | ((dld >> 2) & 0x01);
1217 cmd->cmnd[14] = ((dld & 0x03) << 6) | sd_group_number(cmd);
1218 cmd->cmnd[15] = 0;
1219 put_unaligned_be64(lba, &cmd->cmnd[2]);
1220 put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
1221
1222 return BLK_STS_OK;
1223}
1224
1225static blk_status_t sd_setup_rw10_cmnd(struct scsi_cmnd *cmd, bool write,
1226 sector_t lba, unsigned int nr_blocks,
1227 unsigned char flags)
1228{
1229 cmd->cmd_len = 10;
1230 cmd->cmnd[0] = write ? WRITE_10 : READ_10;
1231 cmd->cmnd[1] = flags;
1232 cmd->cmnd[6] = sd_group_number(cmd);
1233 cmd->cmnd[9] = 0;
1234 put_unaligned_be32(lba, &cmd->cmnd[2]);
1235 put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
1236
1237 return BLK_STS_OK;
1238}
1239
1240static blk_status_t sd_setup_rw6_cmnd(struct scsi_cmnd *cmd, bool write,
1241 sector_t lba, unsigned int nr_blocks,
1242 unsigned char flags)
1243{
1244 /* Avoid that 0 blocks gets translated into 256 blocks. */
1245 if (WARN_ON_ONCE(nr_blocks == 0))
1246 return BLK_STS_IOERR;
1247
1248 if (unlikely(flags & 0x8)) {
1249 /*
1250 * This happens only if this drive failed 10byte rw
1251 * command with ILLEGAL_REQUEST during operation and
1252 * thus turned off use_10_for_rw.
1253 */
1254 scmd_printk(KERN_ERR, cmd, "FUA write on READ/WRITE(6) drive\n");
1255 return BLK_STS_IOERR;
1256 }
1257
1258 cmd->cmd_len = 6;
1259 cmd->cmnd[0] = write ? WRITE_6 : READ_6;
1260 cmd->cmnd[1] = (lba >> 16) & 0x1f;
1261 cmd->cmnd[2] = (lba >> 8) & 0xff;
1262 cmd->cmnd[3] = lba & 0xff;
1263 cmd->cmnd[4] = nr_blocks;
1264 cmd->cmnd[5] = 0;
1265
1266 return BLK_STS_OK;
1267}
1268
1269/*
1270 * Check if a command has a duration limit set. If it does, and the target
1271 * device supports CDL and the feature is enabled, return the limit
1272 * descriptor index to use. Return 0 (no limit) otherwise.
1273 */
1274static int sd_cdl_dld(struct scsi_disk *sdkp, struct scsi_cmnd *scmd)
1275{
1276 struct scsi_device *sdp = sdkp->device;
1277 int hint;
1278
1279 if (!sdp->cdl_supported || !sdp->cdl_enable)
1280 return 0;
1281
1282 /*
1283 * Use "no limit" if the request ioprio does not specify a duration
1284 * limit hint.
1285 */
1286 hint = IOPRIO_PRIO_HINT(req_get_ioprio(scsi_cmd_to_rq(scmd)));
1287 if (hint < IOPRIO_HINT_DEV_DURATION_LIMIT_1 ||
1288 hint > IOPRIO_HINT_DEV_DURATION_LIMIT_7)
1289 return 0;
1290
1291 return (hint - IOPRIO_HINT_DEV_DURATION_LIMIT_1) + 1;
1292}
1293
1294static blk_status_t sd_setup_atomic_cmnd(struct scsi_cmnd *cmd,
1295 sector_t lba, unsigned int nr_blocks,
1296 bool boundary, unsigned char flags)
1297{
1298 cmd->cmd_len = 16;
1299 cmd->cmnd[0] = WRITE_ATOMIC_16;
1300 cmd->cmnd[1] = flags;
1301 put_unaligned_be64(lba, &cmd->cmnd[2]);
1302 put_unaligned_be16(nr_blocks, &cmd->cmnd[12]);
1303 if (boundary)
1304 put_unaligned_be16(nr_blocks, &cmd->cmnd[10]);
1305 else
1306 put_unaligned_be16(0, &cmd->cmnd[10]);
1307 put_unaligned_be16(nr_blocks, &cmd->cmnd[12]);
1308 cmd->cmnd[14] = 0;
1309 cmd->cmnd[15] = 0;
1310
1311 return BLK_STS_OK;
1312}
1313
1314static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
1315{
1316 struct request *rq = scsi_cmd_to_rq(cmd);
1317 struct scsi_device *sdp = cmd->device;
1318 struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
1319 sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq));
1320 sector_t threshold;
1321 unsigned int nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
1322 unsigned int mask = logical_to_sectors(sdp, 1) - 1;
1323 bool write = rq_data_dir(rq) == WRITE;
1324 unsigned char protect, fua;
1325 unsigned int dld;
1326 blk_status_t ret;
1327 unsigned int dif;
1328 bool dix;
1329
1330 ret = scsi_alloc_sgtables(cmd);
1331 if (ret != BLK_STS_OK)
1332 return ret;
1333
1334 ret = BLK_STS_IOERR;
1335 if (!scsi_device_online(sdp) || sdp->changed) {
1336 scmd_printk(KERN_ERR, cmd, "device offline or changed\n");
1337 goto fail;
1338 }
1339
1340 if (blk_rq_pos(rq) + blk_rq_sectors(rq) > get_capacity(rq->q->disk)) {
1341 scmd_printk(KERN_ERR, cmd, "access beyond end of device\n");
1342 goto fail;
1343 }
1344
1345 if ((blk_rq_pos(rq) & mask) || (blk_rq_sectors(rq) & mask)) {
1346 scmd_printk(KERN_ERR, cmd, "request not aligned to the logical block size\n");
1347 goto fail;
1348 }
1349
1350 /*
1351 * Some SD card readers can't handle accesses which touch the
1352 * last one or two logical blocks. Split accesses as needed.
1353 */
1354 threshold = sdkp->capacity - SD_LAST_BUGGY_SECTORS;
1355
1356 if (unlikely(sdp->last_sector_bug && lba + nr_blocks > threshold)) {
1357 if (lba < threshold) {
1358 /* Access up to the threshold but not beyond */
1359 nr_blocks = threshold - lba;
1360 } else {
1361 /* Access only a single logical block */
1362 nr_blocks = 1;
1363 }
1364 }
1365
1366 fua = rq->cmd_flags & REQ_FUA ? 0x8 : 0;
1367 dix = scsi_prot_sg_count(cmd);
1368 dif = scsi_host_dif_capable(cmd->device->host, sdkp->protection_type);
1369 dld = sd_cdl_dld(sdkp, cmd);
1370
1371 if (dif || dix)
1372 protect = sd_setup_protect_cmnd(cmd, dix, dif);
1373 else
1374 protect = 0;
1375
1376 if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
1377 ret = sd_setup_rw32_cmnd(cmd, write, lba, nr_blocks,
1378 protect | fua, dld);
1379 } else if (rq->cmd_flags & REQ_ATOMIC) {
1380 ret = sd_setup_atomic_cmnd(cmd, lba, nr_blocks,
1381 sdkp->use_atomic_write_boundary,
1382 protect | fua);
1383 } else if (sdp->use_16_for_rw || (nr_blocks > 0xffff)) {
1384 ret = sd_setup_rw16_cmnd(cmd, write, lba, nr_blocks,
1385 protect | fua, dld);
1386 } else if ((nr_blocks > 0xff) || (lba > 0x1fffff) ||
1387 sdp->use_10_for_rw || protect || rq->bio->bi_write_hint) {
1388 ret = sd_setup_rw10_cmnd(cmd, write, lba, nr_blocks,
1389 protect | fua);
1390 } else {
1391 ret = sd_setup_rw6_cmnd(cmd, write, lba, nr_blocks,
1392 protect | fua);
1393 }
1394
1395 if (unlikely(ret != BLK_STS_OK))
1396 goto fail;
1397
1398 /*
1399 * We shouldn't disconnect in the middle of a sector, so with a dumb
1400 * host adapter, it's safe to assume that we can at least transfer
1401 * this many bytes between each connect / disconnect.
1402 */
1403 cmd->transfersize = sdp->sector_size;
1404 cmd->underflow = nr_blocks << 9;
1405 cmd->allowed = sdkp->max_retries;
1406 cmd->sdb.length = nr_blocks * sdp->sector_size;
1407
1408 SCSI_LOG_HLQUEUE(1,
1409 scmd_printk(KERN_INFO, cmd,
1410 "%s: block=%llu, count=%d\n", __func__,
1411 (unsigned long long)blk_rq_pos(rq),
1412 blk_rq_sectors(rq)));
1413 SCSI_LOG_HLQUEUE(2,
1414 scmd_printk(KERN_INFO, cmd,
1415 "%s %d/%u 512 byte blocks.\n",
1416 write ? "writing" : "reading", nr_blocks,
1417 blk_rq_sectors(rq)));
1418
1419 /*
1420 * This indicates that the command is ready from our end to be queued.
1421 */
1422 return BLK_STS_OK;
1423fail:
1424 scsi_free_sgtables(cmd);
1425 return ret;
1426}
1427
1428static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
1429{
1430 struct request *rq = scsi_cmd_to_rq(cmd);
1431
1432 switch (req_op(rq)) {
1433 case REQ_OP_DISCARD:
1434 switch (scsi_disk(rq->q->disk)->provisioning_mode) {
1435 case SD_LBP_UNMAP:
1436 return sd_setup_unmap_cmnd(cmd);
1437 case SD_LBP_WS16:
1438 return sd_setup_write_same16_cmnd(cmd, true);
1439 case SD_LBP_WS10:
1440 return sd_setup_write_same10_cmnd(cmd, true);
1441 case SD_LBP_ZERO:
1442 return sd_setup_write_same10_cmnd(cmd, false);
1443 default:
1444 return BLK_STS_TARGET;
1445 }
1446 case REQ_OP_WRITE_ZEROES:
1447 return sd_setup_write_zeroes_cmnd(cmd);
1448 case REQ_OP_FLUSH:
1449 return sd_setup_flush_cmnd(cmd);
1450 case REQ_OP_READ:
1451 case REQ_OP_WRITE:
1452 return sd_setup_read_write_cmnd(cmd);
1453 case REQ_OP_ZONE_RESET:
1454 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
1455 false);
1456 case REQ_OP_ZONE_RESET_ALL:
1457 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
1458 true);
1459 case REQ_OP_ZONE_OPEN:
1460 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_OPEN_ZONE, false);
1461 case REQ_OP_ZONE_CLOSE:
1462 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_CLOSE_ZONE, false);
1463 case REQ_OP_ZONE_FINISH:
1464 return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_FINISH_ZONE, false);
1465 default:
1466 WARN_ON_ONCE(1);
1467 return BLK_STS_NOTSUPP;
1468 }
1469}
1470
1471static void sd_uninit_command(struct scsi_cmnd *SCpnt)
1472{
1473 struct request *rq = scsi_cmd_to_rq(SCpnt);
1474
1475 if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
1476 mempool_free(rq->special_vec.bv_page, sd_page_pool);
1477}
1478
1479static bool sd_need_revalidate(struct gendisk *disk, struct scsi_disk *sdkp)
1480{
1481 if (sdkp->device->removable || sdkp->write_prot) {
1482 if (disk_check_media_change(disk))
1483 return true;
1484 }
1485
1486 /*
1487 * Force a full rescan after ioctl(BLKRRPART). While the disk state has
1488 * nothing to do with partitions, BLKRRPART is used to force a full
1489 * revalidate after things like a format for historical reasons.
1490 */
1491 return test_bit(GD_NEED_PART_SCAN, &disk->state);
1492}
1493
1494/**
1495 * sd_open - open a scsi disk device
1496 * @disk: disk to open
1497 * @mode: open mode
1498 *
1499 * Returns 0 if successful. Returns a negated errno value in case
1500 * of error.
1501 *
1502 * Note: This can be called from a user context (e.g. fsck(1) )
1503 * or from within the kernel (e.g. as a result of a mount(1) ).
1504 * In the latter case @inode and @filp carry an abridged amount
1505 * of information as noted above.
1506 *
1507 * Locking: called with disk->open_mutex held.
1508 **/
1509static int sd_open(struct gendisk *disk, blk_mode_t mode)
1510{
1511 struct scsi_disk *sdkp = scsi_disk(disk);
1512 struct scsi_device *sdev = sdkp->device;
1513 int retval;
1514
1515 if (scsi_device_get(sdev))
1516 return -ENXIO;
1517
1518 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1519
1520 /*
1521 * If the device is in error recovery, wait until it is done.
1522 * If the device is offline, then disallow any access to it.
1523 */
1524 retval = -ENXIO;
1525 if (!scsi_block_when_processing_errors(sdev))
1526 goto error_out;
1527
1528 if (sd_need_revalidate(disk, sdkp))
1529 sd_revalidate_disk(disk);
1530
1531 /*
1532 * If the drive is empty, just let the open fail.
1533 */
1534 retval = -ENOMEDIUM;
1535 if (sdev->removable && !sdkp->media_present &&
1536 !(mode & BLK_OPEN_NDELAY))
1537 goto error_out;
1538
1539 /*
1540 * If the device has the write protect tab set, have the open fail
1541 * if the user expects to be able to write to the thing.
1542 */
1543 retval = -EROFS;
1544 if (sdkp->write_prot && (mode & BLK_OPEN_WRITE))
1545 goto error_out;
1546
1547 /*
1548 * It is possible that the disk changing stuff resulted in
1549 * the device being taken offline. If this is the case,
1550 * report this to the user, and don't pretend that the
1551 * open actually succeeded.
1552 */
1553 retval = -ENXIO;
1554 if (!scsi_device_online(sdev))
1555 goto error_out;
1556
1557 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1558 if (scsi_block_when_processing_errors(sdev))
1559 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1560 }
1561
1562 return 0;
1563
1564error_out:
1565 scsi_device_put(sdev);
1566 return retval;
1567}
1568
1569/**
1570 * sd_release - invoked when the (last) close(2) is called on this
1571 * scsi disk.
1572 * @disk: disk to release
1573 *
1574 * Returns 0.
1575 *
1576 * Note: may block (uninterruptible) if error recovery is underway
1577 * on this disk.
1578 *
1579 * Locking: called with disk->open_mutex held.
1580 **/
1581static void sd_release(struct gendisk *disk)
1582{
1583 struct scsi_disk *sdkp = scsi_disk(disk);
1584 struct scsi_device *sdev = sdkp->device;
1585
1586 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1587
1588 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1589 if (scsi_block_when_processing_errors(sdev))
1590 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1591 }
1592
1593 scsi_device_put(sdev);
1594}
1595
1596static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1597{
1598 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1599 struct scsi_device *sdp = sdkp->device;
1600 struct Scsi_Host *host = sdp->host;
1601 sector_t capacity = logical_to_sectors(sdp, sdkp->capacity);
1602 int diskinfo[4];
1603
1604 /* default to most commonly used values */
1605 diskinfo[0] = 0x40; /* 1 << 6 */
1606 diskinfo[1] = 0x20; /* 1 << 5 */
1607 diskinfo[2] = capacity >> 11;
1608
1609 /* override with calculated, extended default, or driver values */
1610 if (host->hostt->bios_param)
1611 host->hostt->bios_param(sdp, bdev, capacity, diskinfo);
1612 else
1613 scsicam_bios_param(bdev, capacity, diskinfo);
1614
1615 geo->heads = diskinfo[0];
1616 geo->sectors = diskinfo[1];
1617 geo->cylinders = diskinfo[2];
1618 return 0;
1619}
1620
1621/**
1622 * sd_ioctl - process an ioctl
1623 * @bdev: target block device
1624 * @mode: open mode
1625 * @cmd: ioctl command number
1626 * @arg: this is third argument given to ioctl(2) system call.
1627 * Often contains a pointer.
1628 *
1629 * Returns 0 if successful (some ioctls return positive numbers on
1630 * success as well). Returns a negated errno value in case of error.
1631 *
1632 * Note: most ioctls are forward onto the block subsystem or further
1633 * down in the scsi subsystem.
1634 **/
1635static int sd_ioctl(struct block_device *bdev, blk_mode_t mode,
1636 unsigned int cmd, unsigned long arg)
1637{
1638 struct gendisk *disk = bdev->bd_disk;
1639 struct scsi_disk *sdkp = scsi_disk(disk);
1640 struct scsi_device *sdp = sdkp->device;
1641 void __user *p = (void __user *)arg;
1642 int error;
1643
1644 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1645 "cmd=0x%x\n", disk->disk_name, cmd));
1646
1647 if (bdev_is_partition(bdev) && !capable(CAP_SYS_RAWIO))
1648 return -ENOIOCTLCMD;
1649
1650 /*
1651 * If we are in the middle of error recovery, don't let anyone
1652 * else try and use this device. Also, if error recovery fails, it
1653 * may try and take the device offline, in which case all further
1654 * access to the device is prohibited.
1655 */
1656 error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
1657 (mode & BLK_OPEN_NDELAY));
1658 if (error)
1659 return error;
1660
1661 if (is_sed_ioctl(cmd))
1662 return sed_ioctl(sdkp->opal_dev, cmd, p);
1663 return scsi_ioctl(sdp, mode & BLK_OPEN_WRITE, cmd, p);
1664}
1665
1666static void set_media_not_present(struct scsi_disk *sdkp)
1667{
1668 if (sdkp->media_present)
1669 sdkp->device->changed = 1;
1670
1671 if (sdkp->device->removable) {
1672 sdkp->media_present = 0;
1673 sdkp->capacity = 0;
1674 }
1675}
1676
1677static int media_not_present(struct scsi_disk *sdkp,
1678 struct scsi_sense_hdr *sshdr)
1679{
1680 if (!scsi_sense_valid(sshdr))
1681 return 0;
1682
1683 /* not invoked for commands that could return deferred errors */
1684 switch (sshdr->sense_key) {
1685 case UNIT_ATTENTION:
1686 case NOT_READY:
1687 /* medium not present */
1688 if (sshdr->asc == 0x3A) {
1689 set_media_not_present(sdkp);
1690 return 1;
1691 }
1692 }
1693 return 0;
1694}
1695
1696/**
1697 * sd_check_events - check media events
1698 * @disk: kernel device descriptor
1699 * @clearing: disk events currently being cleared
1700 *
1701 * Returns mask of DISK_EVENT_*.
1702 *
1703 * Note: this function is invoked from the block subsystem.
1704 **/
1705static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1706{
1707 struct scsi_disk *sdkp = disk->private_data;
1708 struct scsi_device *sdp;
1709 int retval;
1710 bool disk_changed;
1711
1712 if (!sdkp)
1713 return 0;
1714
1715 sdp = sdkp->device;
1716 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1717
1718 /*
1719 * If the device is offline, don't send any commands - just pretend as
1720 * if the command failed. If the device ever comes back online, we
1721 * can deal with it then. It is only because of unrecoverable errors
1722 * that we would ever take a device offline in the first place.
1723 */
1724 if (!scsi_device_online(sdp)) {
1725 set_media_not_present(sdkp);
1726 goto out;
1727 }
1728
1729 /*
1730 * Using TEST_UNIT_READY enables differentiation between drive with
1731 * no cartridge loaded - NOT READY, drive with changed cartridge -
1732 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1733 *
1734 * Drives that auto spin down. eg iomega jaz 1G, will be started
1735 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1736 * sd_revalidate() is called.
1737 */
1738 if (scsi_block_when_processing_errors(sdp)) {
1739 struct scsi_sense_hdr sshdr = { 0, };
1740
1741 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, sdkp->max_retries,
1742 &sshdr);
1743
1744 /* failed to execute TUR, assume media not present */
1745 if (retval < 0 || host_byte(retval)) {
1746 set_media_not_present(sdkp);
1747 goto out;
1748 }
1749
1750 if (media_not_present(sdkp, &sshdr))
1751 goto out;
1752 }
1753
1754 /*
1755 * For removable scsi disk we have to recognise the presence
1756 * of a disk in the drive.
1757 */
1758 if (!sdkp->media_present)
1759 sdp->changed = 1;
1760 sdkp->media_present = 1;
1761out:
1762 /*
1763 * sdp->changed is set under the following conditions:
1764 *
1765 * Medium present state has changed in either direction.
1766 * Device has indicated UNIT_ATTENTION.
1767 */
1768 disk_changed = sdp->changed;
1769 sdp->changed = 0;
1770 return disk_changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1771}
1772
1773static int sd_sync_cache(struct scsi_disk *sdkp)
1774{
1775 int res;
1776 struct scsi_device *sdp = sdkp->device;
1777 const int timeout = sdp->request_queue->rq_timeout
1778 * SD_FLUSH_TIMEOUT_MULTIPLIER;
1779 /* Leave the rest of the command zero to indicate flush everything. */
1780 const unsigned char cmd[16] = { sdp->use_16_for_sync ?
1781 SYNCHRONIZE_CACHE_16 : SYNCHRONIZE_CACHE };
1782 struct scsi_sense_hdr sshdr;
1783 struct scsi_failure failure_defs[] = {
1784 {
1785 .allowed = 3,
1786 .result = SCMD_FAILURE_RESULT_ANY,
1787 },
1788 {}
1789 };
1790 struct scsi_failures failures = {
1791 .failure_definitions = failure_defs,
1792 };
1793 const struct scsi_exec_args exec_args = {
1794 .req_flags = BLK_MQ_REQ_PM,
1795 .sshdr = &sshdr,
1796 .failures = &failures,
1797 };
1798
1799 if (!scsi_device_online(sdp))
1800 return -ENODEV;
1801
1802 res = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, NULL, 0, timeout,
1803 sdkp->max_retries, &exec_args);
1804 if (res) {
1805 sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
1806
1807 if (res < 0)
1808 return res;
1809
1810 if (scsi_status_is_check_condition(res) &&
1811 scsi_sense_valid(&sshdr)) {
1812 sd_print_sense_hdr(sdkp, &sshdr);
1813
1814 /* we need to evaluate the error return */
1815 if (sshdr.asc == 0x3a || /* medium not present */
1816 sshdr.asc == 0x20 || /* invalid command */
1817 (sshdr.asc == 0x74 && sshdr.ascq == 0x71)) /* drive is password locked */
1818 /* this is no error here */
1819 return 0;
1820
1821 /*
1822 * If a format is in progress or if the drive does not
1823 * support sync, there is not much we can do because
1824 * this is called during shutdown or suspend so just
1825 * return success so those operations can proceed.
1826 */
1827 if ((sshdr.asc == 0x04 && sshdr.ascq == 0x04) ||
1828 sshdr.sense_key == ILLEGAL_REQUEST)
1829 return 0;
1830 }
1831
1832 switch (host_byte(res)) {
1833 /* ignore errors due to racing a disconnection */
1834 case DID_BAD_TARGET:
1835 case DID_NO_CONNECT:
1836 return 0;
1837 /* signal the upper layer it might try again */
1838 case DID_BUS_BUSY:
1839 case DID_IMM_RETRY:
1840 case DID_REQUEUE:
1841 case DID_SOFT_ERROR:
1842 return -EBUSY;
1843 default:
1844 return -EIO;
1845 }
1846 }
1847 return 0;
1848}
1849
1850static void sd_rescan(struct device *dev)
1851{
1852 struct scsi_disk *sdkp = dev_get_drvdata(dev);
1853
1854 sd_revalidate_disk(sdkp->disk);
1855}
1856
1857static int sd_get_unique_id(struct gendisk *disk, u8 id[16],
1858 enum blk_unique_id type)
1859{
1860 struct scsi_device *sdev = scsi_disk(disk)->device;
1861 const struct scsi_vpd *vpd;
1862 const unsigned char *d;
1863 int ret = -ENXIO, len;
1864
1865 rcu_read_lock();
1866 vpd = rcu_dereference(sdev->vpd_pg83);
1867 if (!vpd)
1868 goto out_unlock;
1869
1870 ret = -EINVAL;
1871 for (d = vpd->data + 4; d < vpd->data + vpd->len; d += d[3] + 4) {
1872 /* we only care about designators with LU association */
1873 if (((d[1] >> 4) & 0x3) != 0x00)
1874 continue;
1875 if ((d[1] & 0xf) != type)
1876 continue;
1877
1878 /*
1879 * Only exit early if a 16-byte descriptor was found. Otherwise
1880 * keep looking as one with more entropy might still show up.
1881 */
1882 len = d[3];
1883 if (len != 8 && len != 12 && len != 16)
1884 continue;
1885 ret = len;
1886 memcpy(id, d + 4, len);
1887 if (len == 16)
1888 break;
1889 }
1890out_unlock:
1891 rcu_read_unlock();
1892 return ret;
1893}
1894
1895static int sd_scsi_to_pr_err(struct scsi_sense_hdr *sshdr, int result)
1896{
1897 switch (host_byte(result)) {
1898 case DID_TRANSPORT_MARGINAL:
1899 case DID_TRANSPORT_DISRUPTED:
1900 case DID_BUS_BUSY:
1901 return PR_STS_RETRY_PATH_FAILURE;
1902 case DID_NO_CONNECT:
1903 return PR_STS_PATH_FAILED;
1904 case DID_TRANSPORT_FAILFAST:
1905 return PR_STS_PATH_FAST_FAILED;
1906 }
1907
1908 switch (status_byte(result)) {
1909 case SAM_STAT_RESERVATION_CONFLICT:
1910 return PR_STS_RESERVATION_CONFLICT;
1911 case SAM_STAT_CHECK_CONDITION:
1912 if (!scsi_sense_valid(sshdr))
1913 return PR_STS_IOERR;
1914
1915 if (sshdr->sense_key == ILLEGAL_REQUEST &&
1916 (sshdr->asc == 0x26 || sshdr->asc == 0x24))
1917 return -EINVAL;
1918
1919 fallthrough;
1920 default:
1921 return PR_STS_IOERR;
1922 }
1923}
1924
1925static int sd_pr_in_command(struct block_device *bdev, u8 sa,
1926 unsigned char *data, int data_len)
1927{
1928 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1929 struct scsi_device *sdev = sdkp->device;
1930 struct scsi_sense_hdr sshdr;
1931 u8 cmd[10] = { PERSISTENT_RESERVE_IN, sa };
1932 struct scsi_failure failure_defs[] = {
1933 {
1934 .sense = UNIT_ATTENTION,
1935 .asc = SCMD_FAILURE_ASC_ANY,
1936 .ascq = SCMD_FAILURE_ASCQ_ANY,
1937 .allowed = 5,
1938 .result = SAM_STAT_CHECK_CONDITION,
1939 },
1940 {}
1941 };
1942 struct scsi_failures failures = {
1943 .failure_definitions = failure_defs,
1944 };
1945 const struct scsi_exec_args exec_args = {
1946 .sshdr = &sshdr,
1947 .failures = &failures,
1948 };
1949 int result;
1950
1951 put_unaligned_be16(data_len, &cmd[7]);
1952
1953 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, data, data_len,
1954 SD_TIMEOUT, sdkp->max_retries, &exec_args);
1955 if (scsi_status_is_check_condition(result) &&
1956 scsi_sense_valid(&sshdr)) {
1957 sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
1958 scsi_print_sense_hdr(sdev, NULL, &sshdr);
1959 }
1960
1961 if (result <= 0)
1962 return result;
1963
1964 return sd_scsi_to_pr_err(&sshdr, result);
1965}
1966
1967static int sd_pr_read_keys(struct block_device *bdev, struct pr_keys *keys_info)
1968{
1969 int result, i, data_offset, num_copy_keys;
1970 u32 num_keys = keys_info->num_keys;
1971 int data_len = num_keys * 8 + 8;
1972 u8 *data;
1973
1974 data = kzalloc(data_len, GFP_KERNEL);
1975 if (!data)
1976 return -ENOMEM;
1977
1978 result = sd_pr_in_command(bdev, READ_KEYS, data, data_len);
1979 if (result)
1980 goto free_data;
1981
1982 keys_info->generation = get_unaligned_be32(&data[0]);
1983 keys_info->num_keys = get_unaligned_be32(&data[4]) / 8;
1984
1985 data_offset = 8;
1986 num_copy_keys = min(num_keys, keys_info->num_keys);
1987
1988 for (i = 0; i < num_copy_keys; i++) {
1989 keys_info->keys[i] = get_unaligned_be64(&data[data_offset]);
1990 data_offset += 8;
1991 }
1992
1993free_data:
1994 kfree(data);
1995 return result;
1996}
1997
1998static int sd_pr_read_reservation(struct block_device *bdev,
1999 struct pr_held_reservation *rsv)
2000{
2001 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
2002 struct scsi_device *sdev = sdkp->device;
2003 u8 data[24] = { };
2004 int result, len;
2005
2006 result = sd_pr_in_command(bdev, READ_RESERVATION, data, sizeof(data));
2007 if (result)
2008 return result;
2009
2010 len = get_unaligned_be32(&data[4]);
2011 if (!len)
2012 return 0;
2013
2014 /* Make sure we have at least the key and type */
2015 if (len < 14) {
2016 sdev_printk(KERN_INFO, sdev,
2017 "READ RESERVATION failed due to short return buffer of %d bytes\n",
2018 len);
2019 return -EINVAL;
2020 }
2021
2022 rsv->generation = get_unaligned_be32(&data[0]);
2023 rsv->key = get_unaligned_be64(&data[8]);
2024 rsv->type = scsi_pr_type_to_block(data[21] & 0x0f);
2025 return 0;
2026}
2027
2028static int sd_pr_out_command(struct block_device *bdev, u8 sa, u64 key,
2029 u64 sa_key, enum scsi_pr_type type, u8 flags)
2030{
2031 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
2032 struct scsi_device *sdev = sdkp->device;
2033 struct scsi_sense_hdr sshdr;
2034 struct scsi_failure failure_defs[] = {
2035 {
2036 .sense = UNIT_ATTENTION,
2037 .asc = SCMD_FAILURE_ASC_ANY,
2038 .ascq = SCMD_FAILURE_ASCQ_ANY,
2039 .allowed = 5,
2040 .result = SAM_STAT_CHECK_CONDITION,
2041 },
2042 {}
2043 };
2044 struct scsi_failures failures = {
2045 .failure_definitions = failure_defs,
2046 };
2047 const struct scsi_exec_args exec_args = {
2048 .sshdr = &sshdr,
2049 .failures = &failures,
2050 };
2051 int result;
2052 u8 cmd[16] = { 0, };
2053 u8 data[24] = { 0, };
2054
2055 cmd[0] = PERSISTENT_RESERVE_OUT;
2056 cmd[1] = sa;
2057 cmd[2] = type;
2058 put_unaligned_be32(sizeof(data), &cmd[5]);
2059
2060 put_unaligned_be64(key, &data[0]);
2061 put_unaligned_be64(sa_key, &data[8]);
2062 data[20] = flags;
2063
2064 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, &data,
2065 sizeof(data), SD_TIMEOUT, sdkp->max_retries,
2066 &exec_args);
2067
2068 if (scsi_status_is_check_condition(result) &&
2069 scsi_sense_valid(&sshdr)) {
2070 sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
2071 scsi_print_sense_hdr(sdev, NULL, &sshdr);
2072 }
2073
2074 if (result <= 0)
2075 return result;
2076
2077 return sd_scsi_to_pr_err(&sshdr, result);
2078}
2079
2080static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
2081 u32 flags)
2082{
2083 if (flags & ~PR_FL_IGNORE_KEY)
2084 return -EOPNOTSUPP;
2085 return sd_pr_out_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
2086 old_key, new_key, 0,
2087 (1 << 0) /* APTPL */);
2088}
2089
2090static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
2091 u32 flags)
2092{
2093 if (flags)
2094 return -EOPNOTSUPP;
2095 return sd_pr_out_command(bdev, 0x01, key, 0,
2096 block_pr_type_to_scsi(type), 0);
2097}
2098
2099static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
2100{
2101 return sd_pr_out_command(bdev, 0x02, key, 0,
2102 block_pr_type_to_scsi(type), 0);
2103}
2104
2105static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
2106 enum pr_type type, bool abort)
2107{
2108 return sd_pr_out_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
2109 block_pr_type_to_scsi(type), 0);
2110}
2111
2112static int sd_pr_clear(struct block_device *bdev, u64 key)
2113{
2114 return sd_pr_out_command(bdev, 0x03, key, 0, 0, 0);
2115}
2116
2117static const struct pr_ops sd_pr_ops = {
2118 .pr_register = sd_pr_register,
2119 .pr_reserve = sd_pr_reserve,
2120 .pr_release = sd_pr_release,
2121 .pr_preempt = sd_pr_preempt,
2122 .pr_clear = sd_pr_clear,
2123 .pr_read_keys = sd_pr_read_keys,
2124 .pr_read_reservation = sd_pr_read_reservation,
2125};
2126
2127static void scsi_disk_free_disk(struct gendisk *disk)
2128{
2129 struct scsi_disk *sdkp = scsi_disk(disk);
2130
2131 put_device(&sdkp->disk_dev);
2132}
2133
2134static const struct block_device_operations sd_fops = {
2135 .owner = THIS_MODULE,
2136 .open = sd_open,
2137 .release = sd_release,
2138 .ioctl = sd_ioctl,
2139 .getgeo = sd_getgeo,
2140 .compat_ioctl = blkdev_compat_ptr_ioctl,
2141 .check_events = sd_check_events,
2142 .unlock_native_capacity = sd_unlock_native_capacity,
2143 .report_zones = sd_zbc_report_zones,
2144 .get_unique_id = sd_get_unique_id,
2145 .free_disk = scsi_disk_free_disk,
2146 .pr_ops = &sd_pr_ops,
2147};
2148
2149/**
2150 * sd_eh_reset - reset error handling callback
2151 * @scmd: sd-issued command that has failed
2152 *
2153 * This function is called by the SCSI midlayer before starting
2154 * SCSI EH. When counting medium access failures we have to be
2155 * careful to register it only only once per device and SCSI EH run;
2156 * there might be several timed out commands which will cause the
2157 * 'max_medium_access_timeouts' counter to trigger after the first
2158 * SCSI EH run already and set the device to offline.
2159 * So this function resets the internal counter before starting SCSI EH.
2160 **/
2161static void sd_eh_reset(struct scsi_cmnd *scmd)
2162{
2163 struct scsi_disk *sdkp = scsi_disk(scsi_cmd_to_rq(scmd)->q->disk);
2164
2165 /* New SCSI EH run, reset gate variable */
2166 sdkp->ignore_medium_access_errors = false;
2167}
2168
2169/**
2170 * sd_eh_action - error handling callback
2171 * @scmd: sd-issued command that has failed
2172 * @eh_disp: The recovery disposition suggested by the midlayer
2173 *
2174 * This function is called by the SCSI midlayer upon completion of an
2175 * error test command (currently TEST UNIT READY). The result of sending
2176 * the eh command is passed in eh_disp. We're looking for devices that
2177 * fail medium access commands but are OK with non access commands like
2178 * test unit ready (so wrongly see the device as having a successful
2179 * recovery)
2180 **/
2181static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
2182{
2183 struct scsi_disk *sdkp = scsi_disk(scsi_cmd_to_rq(scmd)->q->disk);
2184 struct scsi_device *sdev = scmd->device;
2185
2186 if (!scsi_device_online(sdev) ||
2187 !scsi_medium_access_command(scmd) ||
2188 host_byte(scmd->result) != DID_TIME_OUT ||
2189 eh_disp != SUCCESS)
2190 return eh_disp;
2191
2192 /*
2193 * The device has timed out executing a medium access command.
2194 * However, the TEST UNIT READY command sent during error
2195 * handling completed successfully. Either the device is in the
2196 * process of recovering or has it suffered an internal failure
2197 * that prevents access to the storage medium.
2198 */
2199 if (!sdkp->ignore_medium_access_errors) {
2200 sdkp->medium_access_timed_out++;
2201 sdkp->ignore_medium_access_errors = true;
2202 }
2203
2204 /*
2205 * If the device keeps failing read/write commands but TEST UNIT
2206 * READY always completes successfully we assume that medium
2207 * access is no longer possible and take the device offline.
2208 */
2209 if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
2210 scmd_printk(KERN_ERR, scmd,
2211 "Medium access timeout failure. Offlining disk!\n");
2212 mutex_lock(&sdev->state_mutex);
2213 scsi_device_set_state(sdev, SDEV_OFFLINE);
2214 mutex_unlock(&sdev->state_mutex);
2215
2216 return SUCCESS;
2217 }
2218
2219 return eh_disp;
2220}
2221
2222static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
2223{
2224 struct request *req = scsi_cmd_to_rq(scmd);
2225 struct scsi_device *sdev = scmd->device;
2226 unsigned int transferred, good_bytes;
2227 u64 start_lba, end_lba, bad_lba;
2228
2229 /*
2230 * Some commands have a payload smaller than the device logical
2231 * block size (e.g. INQUIRY on a 4K disk).
2232 */
2233 if (scsi_bufflen(scmd) <= sdev->sector_size)
2234 return 0;
2235
2236 /* Check if we have a 'bad_lba' information */
2237 if (!scsi_get_sense_info_fld(scmd->sense_buffer,
2238 SCSI_SENSE_BUFFERSIZE,
2239 &bad_lba))
2240 return 0;
2241
2242 /*
2243 * If the bad lba was reported incorrectly, we have no idea where
2244 * the error is.
2245 */
2246 start_lba = sectors_to_logical(sdev, blk_rq_pos(req));
2247 end_lba = start_lba + bytes_to_logical(sdev, scsi_bufflen(scmd));
2248 if (bad_lba < start_lba || bad_lba >= end_lba)
2249 return 0;
2250
2251 /*
2252 * resid is optional but mostly filled in. When it's unused,
2253 * its value is zero, so we assume the whole buffer transferred
2254 */
2255 transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
2256
2257 /* This computation should always be done in terms of the
2258 * resolution of the device's medium.
2259 */
2260 good_bytes = logical_to_bytes(sdev, bad_lba - start_lba);
2261
2262 return min(good_bytes, transferred);
2263}
2264
2265/**
2266 * sd_done - bottom half handler: called when the lower level
2267 * driver has completed (successfully or otherwise) a scsi command.
2268 * @SCpnt: mid-level's per command structure.
2269 *
2270 * Note: potentially run from within an ISR. Must not block.
2271 **/
2272static int sd_done(struct scsi_cmnd *SCpnt)
2273{
2274 int result = SCpnt->result;
2275 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
2276 unsigned int sector_size = SCpnt->device->sector_size;
2277 unsigned int resid;
2278 struct scsi_sense_hdr sshdr;
2279 struct request *req = scsi_cmd_to_rq(SCpnt);
2280 struct scsi_disk *sdkp = scsi_disk(req->q->disk);
2281 int sense_valid = 0;
2282 int sense_deferred = 0;
2283
2284 switch (req_op(req)) {
2285 case REQ_OP_DISCARD:
2286 case REQ_OP_WRITE_ZEROES:
2287 case REQ_OP_ZONE_RESET:
2288 case REQ_OP_ZONE_RESET_ALL:
2289 case REQ_OP_ZONE_OPEN:
2290 case REQ_OP_ZONE_CLOSE:
2291 case REQ_OP_ZONE_FINISH:
2292 if (!result) {
2293 good_bytes = blk_rq_bytes(req);
2294 scsi_set_resid(SCpnt, 0);
2295 } else {
2296 good_bytes = 0;
2297 scsi_set_resid(SCpnt, blk_rq_bytes(req));
2298 }
2299 break;
2300 default:
2301 /*
2302 * In case of bogus fw or device, we could end up having
2303 * an unaligned partial completion. Check this here and force
2304 * alignment.
2305 */
2306 resid = scsi_get_resid(SCpnt);
2307 if (resid & (sector_size - 1)) {
2308 sd_printk(KERN_INFO, sdkp,
2309 "Unaligned partial completion (resid=%u, sector_sz=%u)\n",
2310 resid, sector_size);
2311 scsi_print_command(SCpnt);
2312 resid = min(scsi_bufflen(SCpnt),
2313 round_up(resid, sector_size));
2314 scsi_set_resid(SCpnt, resid);
2315 }
2316 }
2317
2318 if (result) {
2319 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
2320 if (sense_valid)
2321 sense_deferred = scsi_sense_is_deferred(&sshdr);
2322 }
2323 sdkp->medium_access_timed_out = 0;
2324
2325 if (!scsi_status_is_check_condition(result) &&
2326 (!sense_valid || sense_deferred))
2327 goto out;
2328
2329 switch (sshdr.sense_key) {
2330 case HARDWARE_ERROR:
2331 case MEDIUM_ERROR:
2332 good_bytes = sd_completed_bytes(SCpnt);
2333 break;
2334 case RECOVERED_ERROR:
2335 good_bytes = scsi_bufflen(SCpnt);
2336 break;
2337 case NO_SENSE:
2338 /* This indicates a false check condition, so ignore it. An
2339 * unknown amount of data was transferred so treat it as an
2340 * error.
2341 */
2342 SCpnt->result = 0;
2343 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
2344 break;
2345 case ABORTED_COMMAND:
2346 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
2347 good_bytes = sd_completed_bytes(SCpnt);
2348 break;
2349 case ILLEGAL_REQUEST:
2350 switch (sshdr.asc) {
2351 case 0x10: /* DIX: Host detected corruption */
2352 good_bytes = sd_completed_bytes(SCpnt);
2353 break;
2354 case 0x20: /* INVALID COMMAND OPCODE */
2355 case 0x24: /* INVALID FIELD IN CDB */
2356 switch (SCpnt->cmnd[0]) {
2357 case UNMAP:
2358 sd_disable_discard(sdkp);
2359 break;
2360 case WRITE_SAME_16:
2361 case WRITE_SAME:
2362 if (SCpnt->cmnd[1] & 8) { /* UNMAP */
2363 sd_disable_discard(sdkp);
2364 } else {
2365 sd_disable_write_same(sdkp);
2366 req->rq_flags |= RQF_QUIET;
2367 }
2368 break;
2369 }
2370 }
2371 break;
2372 default:
2373 break;
2374 }
2375
2376 out:
2377 if (sdkp->device->type == TYPE_ZBC)
2378 good_bytes = sd_zbc_complete(SCpnt, good_bytes, &sshdr);
2379
2380 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
2381 "sd_done: completed %d of %d bytes\n",
2382 good_bytes, scsi_bufflen(SCpnt)));
2383
2384 return good_bytes;
2385}
2386
2387/*
2388 * spinup disk - called only in sd_revalidate_disk()
2389 */
2390static void
2391sd_spinup_disk(struct scsi_disk *sdkp)
2392{
2393 static const u8 cmd[10] = { TEST_UNIT_READY };
2394 unsigned long spintime_expire = 0;
2395 int spintime, sense_valid = 0;
2396 unsigned int the_result;
2397 struct scsi_sense_hdr sshdr;
2398 struct scsi_failure failure_defs[] = {
2399 /* Do not retry Medium Not Present */
2400 {
2401 .sense = UNIT_ATTENTION,
2402 .asc = 0x3A,
2403 .ascq = SCMD_FAILURE_ASCQ_ANY,
2404 .result = SAM_STAT_CHECK_CONDITION,
2405 },
2406 {
2407 .sense = NOT_READY,
2408 .asc = 0x3A,
2409 .ascq = SCMD_FAILURE_ASCQ_ANY,
2410 .result = SAM_STAT_CHECK_CONDITION,
2411 },
2412 /* Retry when scsi_status_is_good would return false 3 times */
2413 {
2414 .result = SCMD_FAILURE_STAT_ANY,
2415 .allowed = 3,
2416 },
2417 {}
2418 };
2419 struct scsi_failures failures = {
2420 .failure_definitions = failure_defs,
2421 };
2422 const struct scsi_exec_args exec_args = {
2423 .sshdr = &sshdr,
2424 .failures = &failures,
2425 };
2426
2427 spintime = 0;
2428
2429 /* Spin up drives, as required. Only do this at boot time */
2430 /* Spinup needs to be done for module loads too. */
2431 do {
2432 bool media_was_present = sdkp->media_present;
2433
2434 scsi_failures_reset_retries(&failures);
2435
2436 the_result = scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN,
2437 NULL, 0, SD_TIMEOUT,
2438 sdkp->max_retries, &exec_args);
2439
2440
2441 if (the_result > 0) {
2442 /*
2443 * If the drive has indicated to us that it doesn't
2444 * have any media in it, don't bother with any more
2445 * polling.
2446 */
2447 if (media_not_present(sdkp, &sshdr)) {
2448 if (media_was_present)
2449 sd_printk(KERN_NOTICE, sdkp,
2450 "Media removed, stopped polling\n");
2451 return;
2452 }
2453 sense_valid = scsi_sense_valid(&sshdr);
2454 }
2455
2456 if (!scsi_status_is_check_condition(the_result)) {
2457 /* no sense, TUR either succeeded or failed
2458 * with a status error */
2459 if(!spintime && !scsi_status_is_good(the_result)) {
2460 sd_print_result(sdkp, "Test Unit Ready failed",
2461 the_result);
2462 }
2463 break;
2464 }
2465
2466 /*
2467 * The device does not want the automatic start to be issued.
2468 */
2469 if (sdkp->device->no_start_on_add)
2470 break;
2471
2472 if (sense_valid && sshdr.sense_key == NOT_READY) {
2473 if (sshdr.asc == 4 && sshdr.ascq == 3)
2474 break; /* manual intervention required */
2475 if (sshdr.asc == 4 && sshdr.ascq == 0xb)
2476 break; /* standby */
2477 if (sshdr.asc == 4 && sshdr.ascq == 0xc)
2478 break; /* unavailable */
2479 if (sshdr.asc == 4 && sshdr.ascq == 0x1b)
2480 break; /* sanitize in progress */
2481 if (sshdr.asc == 4 && sshdr.ascq == 0x24)
2482 break; /* depopulation in progress */
2483 if (sshdr.asc == 4 && sshdr.ascq == 0x25)
2484 break; /* depopulation restoration in progress */
2485 /*
2486 * Issue command to spin up drive when not ready
2487 */
2488 if (!spintime) {
2489 /* Return immediately and start spin cycle */
2490 const u8 start_cmd[10] = {
2491 [0] = START_STOP,
2492 [1] = 1,
2493 [4] = sdkp->device->start_stop_pwr_cond ?
2494 0x11 : 1,
2495 };
2496
2497 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
2498 scsi_execute_cmd(sdkp->device, start_cmd,
2499 REQ_OP_DRV_IN, NULL, 0,
2500 SD_TIMEOUT, sdkp->max_retries,
2501 &exec_args);
2502 spintime_expire = jiffies + 100 * HZ;
2503 spintime = 1;
2504 }
2505 /* Wait 1 second for next try */
2506 msleep(1000);
2507 printk(KERN_CONT ".");
2508
2509 /*
2510 * Wait for USB flash devices with slow firmware.
2511 * Yes, this sense key/ASC combination shouldn't
2512 * occur here. It's characteristic of these devices.
2513 */
2514 } else if (sense_valid &&
2515 sshdr.sense_key == UNIT_ATTENTION &&
2516 sshdr.asc == 0x28) {
2517 if (!spintime) {
2518 spintime_expire = jiffies + 5 * HZ;
2519 spintime = 1;
2520 }
2521 /* Wait 1 second for next try */
2522 msleep(1000);
2523 } else {
2524 /* we don't understand the sense code, so it's
2525 * probably pointless to loop */
2526 if(!spintime) {
2527 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
2528 sd_print_sense_hdr(sdkp, &sshdr);
2529 }
2530 break;
2531 }
2532
2533 } while (spintime && time_before_eq(jiffies, spintime_expire));
2534
2535 if (spintime) {
2536 if (scsi_status_is_good(the_result))
2537 printk(KERN_CONT "ready\n");
2538 else
2539 printk(KERN_CONT "not responding...\n");
2540 }
2541}
2542
2543/*
2544 * Determine whether disk supports Data Integrity Field.
2545 */
2546static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
2547{
2548 struct scsi_device *sdp = sdkp->device;
2549 u8 type;
2550
2551 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0) {
2552 sdkp->protection_type = 0;
2553 return 0;
2554 }
2555
2556 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
2557
2558 if (type > T10_PI_TYPE3_PROTECTION) {
2559 sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
2560 " protection type %u. Disabling disk!\n",
2561 type);
2562 sdkp->protection_type = 0;
2563 return -ENODEV;
2564 }
2565
2566 sdkp->protection_type = type;
2567
2568 return 0;
2569}
2570
2571static void sd_config_protection(struct scsi_disk *sdkp,
2572 struct queue_limits *lim)
2573{
2574 struct scsi_device *sdp = sdkp->device;
2575
2576 if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY))
2577 sd_dif_config_host(sdkp, lim);
2578
2579 if (!sdkp->protection_type)
2580 return;
2581
2582 if (!scsi_host_dif_capable(sdp->host, sdkp->protection_type)) {
2583 sd_first_printk(KERN_NOTICE, sdkp,
2584 "Disabling DIF Type %u protection\n",
2585 sdkp->protection_type);
2586 sdkp->protection_type = 0;
2587 }
2588
2589 sd_first_printk(KERN_NOTICE, sdkp, "Enabling DIF Type %u protection\n",
2590 sdkp->protection_type);
2591}
2592
2593static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
2594 struct scsi_sense_hdr *sshdr, int sense_valid,
2595 int the_result)
2596{
2597 if (sense_valid)
2598 sd_print_sense_hdr(sdkp, sshdr);
2599 else
2600 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
2601
2602 /*
2603 * Set dirty bit for removable devices if not ready -
2604 * sometimes drives will not report this properly.
2605 */
2606 if (sdp->removable &&
2607 sense_valid && sshdr->sense_key == NOT_READY)
2608 set_media_not_present(sdkp);
2609
2610 /*
2611 * We used to set media_present to 0 here to indicate no media
2612 * in the drive, but some drives fail read capacity even with
2613 * media present, so we can't do that.
2614 */
2615 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
2616}
2617
2618#define RC16_LEN 32
2619#if RC16_LEN > SD_BUF_SIZE
2620#error RC16_LEN must not be more than SD_BUF_SIZE
2621#endif
2622
2623#define READ_CAPACITY_RETRIES_ON_RESET 10
2624
2625static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
2626 struct queue_limits *lim, unsigned char *buffer)
2627{
2628 unsigned char cmd[16];
2629 struct scsi_sense_hdr sshdr;
2630 const struct scsi_exec_args exec_args = {
2631 .sshdr = &sshdr,
2632 };
2633 int sense_valid = 0;
2634 int the_result;
2635 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2636 unsigned int alignment;
2637 unsigned long long lba;
2638 unsigned sector_size;
2639
2640 if (sdp->no_read_capacity_16)
2641 return -EINVAL;
2642
2643 do {
2644 memset(cmd, 0, 16);
2645 cmd[0] = SERVICE_ACTION_IN_16;
2646 cmd[1] = SAI_READ_CAPACITY_16;
2647 cmd[13] = RC16_LEN;
2648 memset(buffer, 0, RC16_LEN);
2649
2650 the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN,
2651 buffer, RC16_LEN, SD_TIMEOUT,
2652 sdkp->max_retries, &exec_args);
2653 if (the_result > 0) {
2654 if (media_not_present(sdkp, &sshdr))
2655 return -ENODEV;
2656
2657 sense_valid = scsi_sense_valid(&sshdr);
2658 if (sense_valid &&
2659 sshdr.sense_key == ILLEGAL_REQUEST &&
2660 (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
2661 sshdr.ascq == 0x00)
2662 /* Invalid Command Operation Code or
2663 * Invalid Field in CDB, just retry
2664 * silently with RC10 */
2665 return -EINVAL;
2666 if (sense_valid &&
2667 sshdr.sense_key == UNIT_ATTENTION &&
2668 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2669 /* Device reset might occur several times,
2670 * give it one more chance */
2671 if (--reset_retries > 0)
2672 continue;
2673 }
2674 retries--;
2675
2676 } while (the_result && retries);
2677
2678 if (the_result) {
2679 sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
2680 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2681 return -EINVAL;
2682 }
2683
2684 sector_size = get_unaligned_be32(&buffer[8]);
2685 lba = get_unaligned_be64(&buffer[0]);
2686
2687 if (sd_read_protection_type(sdkp, buffer) < 0) {
2688 sdkp->capacity = 0;
2689 return -ENODEV;
2690 }
2691
2692 /* Logical blocks per physical block exponent */
2693 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
2694
2695 /* RC basis */
2696 sdkp->rc_basis = (buffer[12] >> 4) & 0x3;
2697
2698 /* Lowest aligned logical block */
2699 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2700 lim->alignment_offset = alignment;
2701 if (alignment && sdkp->first_scan)
2702 sd_printk(KERN_NOTICE, sdkp,
2703 "physical block alignment offset: %u\n", alignment);
2704
2705 if (buffer[14] & 0x80) { /* LBPME */
2706 sdkp->lbpme = 1;
2707
2708 if (buffer[14] & 0x40) /* LBPRZ */
2709 sdkp->lbprz = 1;
2710 }
2711
2712 sdkp->capacity = lba + 1;
2713 return sector_size;
2714}
2715
2716static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2717 unsigned char *buffer)
2718{
2719 static const u8 cmd[10] = { READ_CAPACITY };
2720 struct scsi_sense_hdr sshdr;
2721 struct scsi_failure failure_defs[] = {
2722 /* Do not retry Medium Not Present */
2723 {
2724 .sense = UNIT_ATTENTION,
2725 .asc = 0x3A,
2726 .result = SAM_STAT_CHECK_CONDITION,
2727 },
2728 {
2729 .sense = NOT_READY,
2730 .asc = 0x3A,
2731 .result = SAM_STAT_CHECK_CONDITION,
2732 },
2733 /* Device reset might occur several times so retry a lot */
2734 {
2735 .sense = UNIT_ATTENTION,
2736 .asc = 0x29,
2737 .allowed = READ_CAPACITY_RETRIES_ON_RESET,
2738 .result = SAM_STAT_CHECK_CONDITION,
2739 },
2740 /* Any other error not listed above retry 3 times */
2741 {
2742 .result = SCMD_FAILURE_RESULT_ANY,
2743 .allowed = 3,
2744 },
2745 {}
2746 };
2747 struct scsi_failures failures = {
2748 .failure_definitions = failure_defs,
2749 };
2750 const struct scsi_exec_args exec_args = {
2751 .sshdr = &sshdr,
2752 .failures = &failures,
2753 };
2754 int sense_valid = 0;
2755 int the_result;
2756 sector_t lba;
2757 unsigned sector_size;
2758
2759 memset(buffer, 0, 8);
2760
2761 the_result = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, buffer,
2762 8, SD_TIMEOUT, sdkp->max_retries,
2763 &exec_args);
2764
2765 if (the_result > 0) {
2766 sense_valid = scsi_sense_valid(&sshdr);
2767
2768 if (media_not_present(sdkp, &sshdr))
2769 return -ENODEV;
2770 }
2771
2772 if (the_result) {
2773 sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
2774 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2775 return -EINVAL;
2776 }
2777
2778 sector_size = get_unaligned_be32(&buffer[4]);
2779 lba = get_unaligned_be32(&buffer[0]);
2780
2781 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2782 /* Some buggy (usb cardreader) devices return an lba of
2783 0xffffffff when the want to report a size of 0 (with
2784 which they really mean no media is present) */
2785 sdkp->capacity = 0;
2786 sdkp->physical_block_size = sector_size;
2787 return sector_size;
2788 }
2789
2790 sdkp->capacity = lba + 1;
2791 sdkp->physical_block_size = sector_size;
2792 return sector_size;
2793}
2794
2795static int sd_try_rc16_first(struct scsi_device *sdp)
2796{
2797 if (sdp->host->max_cmd_len < 16)
2798 return 0;
2799 if (sdp->try_rc_10_first)
2800 return 0;
2801 if (sdp->scsi_level > SCSI_SPC_2)
2802 return 1;
2803 if (scsi_device_protection(sdp))
2804 return 1;
2805 return 0;
2806}
2807
2808/*
2809 * read disk capacity
2810 */
2811static void
2812sd_read_capacity(struct scsi_disk *sdkp, struct queue_limits *lim,
2813 unsigned char *buffer)
2814{
2815 int sector_size;
2816 struct scsi_device *sdp = sdkp->device;
2817
2818 if (sd_try_rc16_first(sdp)) {
2819 sector_size = read_capacity_16(sdkp, sdp, lim, buffer);
2820 if (sector_size == -EOVERFLOW)
2821 goto got_data;
2822 if (sector_size == -ENODEV)
2823 return;
2824 if (sector_size < 0)
2825 sector_size = read_capacity_10(sdkp, sdp, buffer);
2826 if (sector_size < 0)
2827 return;
2828 } else {
2829 sector_size = read_capacity_10(sdkp, sdp, buffer);
2830 if (sector_size == -EOVERFLOW)
2831 goto got_data;
2832 if (sector_size < 0)
2833 return;
2834 if ((sizeof(sdkp->capacity) > 4) &&
2835 (sdkp->capacity > 0xffffffffULL)) {
2836 int old_sector_size = sector_size;
2837 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2838 "Trying to use READ CAPACITY(16).\n");
2839 sector_size = read_capacity_16(sdkp, sdp, lim, buffer);
2840 if (sector_size < 0) {
2841 sd_printk(KERN_NOTICE, sdkp,
2842 "Using 0xffffffff as device size\n");
2843 sdkp->capacity = 1 + (sector_t) 0xffffffff;
2844 sector_size = old_sector_size;
2845 goto got_data;
2846 }
2847 /* Remember that READ CAPACITY(16) succeeded */
2848 sdp->try_rc_10_first = 0;
2849 }
2850 }
2851
2852 /* Some devices are known to return the total number of blocks,
2853 * not the highest block number. Some devices have versions
2854 * which do this and others which do not. Some devices we might
2855 * suspect of doing this but we don't know for certain.
2856 *
2857 * If we know the reported capacity is wrong, decrement it. If
2858 * we can only guess, then assume the number of blocks is even
2859 * (usually true but not always) and err on the side of lowering
2860 * the capacity.
2861 */
2862 if (sdp->fix_capacity ||
2863 (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2864 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2865 "from its reported value: %llu\n",
2866 (unsigned long long) sdkp->capacity);
2867 --sdkp->capacity;
2868 }
2869
2870got_data:
2871 if (sector_size == 0) {
2872 sector_size = 512;
2873 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2874 "assuming 512.\n");
2875 }
2876
2877 if (sector_size != 512 &&
2878 sector_size != 1024 &&
2879 sector_size != 2048 &&
2880 sector_size != 4096) {
2881 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2882 sector_size);
2883 /*
2884 * The user might want to re-format the drive with
2885 * a supported sectorsize. Once this happens, it
2886 * would be relatively trivial to set the thing up.
2887 * For this reason, we leave the thing in the table.
2888 */
2889 sdkp->capacity = 0;
2890 /*
2891 * set a bogus sector size so the normal read/write
2892 * logic in the block layer will eventually refuse any
2893 * request on this device without tripping over power
2894 * of two sector size assumptions
2895 */
2896 sector_size = 512;
2897 }
2898 lim->logical_block_size = sector_size;
2899 lim->physical_block_size = sdkp->physical_block_size;
2900 sdkp->device->sector_size = sector_size;
2901
2902 if (sdkp->capacity > 0xffffffff)
2903 sdp->use_16_for_rw = 1;
2904
2905}
2906
2907/*
2908 * Print disk capacity
2909 */
2910static void
2911sd_print_capacity(struct scsi_disk *sdkp,
2912 sector_t old_capacity)
2913{
2914 int sector_size = sdkp->device->sector_size;
2915 char cap_str_2[10], cap_str_10[10];
2916
2917 if (!sdkp->first_scan && old_capacity == sdkp->capacity)
2918 return;
2919
2920 string_get_size(sdkp->capacity, sector_size,
2921 STRING_UNITS_2, cap_str_2, sizeof(cap_str_2));
2922 string_get_size(sdkp->capacity, sector_size,
2923 STRING_UNITS_10, cap_str_10, sizeof(cap_str_10));
2924
2925 sd_printk(KERN_NOTICE, sdkp,
2926 "%llu %d-byte logical blocks: (%s/%s)\n",
2927 (unsigned long long)sdkp->capacity,
2928 sector_size, cap_str_10, cap_str_2);
2929
2930 if (sdkp->physical_block_size != sector_size)
2931 sd_printk(KERN_NOTICE, sdkp,
2932 "%u-byte physical blocks\n",
2933 sdkp->physical_block_size);
2934}
2935
2936/* called with buffer of length 512 */
2937static inline int
2938sd_do_mode_sense(struct scsi_disk *sdkp, int dbd, int modepage,
2939 unsigned char *buffer, int len, struct scsi_mode_data *data,
2940 struct scsi_sense_hdr *sshdr)
2941{
2942 /*
2943 * If we must use MODE SENSE(10), make sure that the buffer length
2944 * is at least 8 bytes so that the mode sense header fits.
2945 */
2946 if (sdkp->device->use_10_for_ms && len < 8)
2947 len = 8;
2948
2949 return scsi_mode_sense(sdkp->device, dbd, modepage, 0, buffer, len,
2950 SD_TIMEOUT, sdkp->max_retries, data, sshdr);
2951}
2952
2953/*
2954 * read write protect setting, if possible - called only in sd_revalidate_disk()
2955 * called with buffer of length SD_BUF_SIZE
2956 */
2957static void
2958sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2959{
2960 int res;
2961 struct scsi_device *sdp = sdkp->device;
2962 struct scsi_mode_data data;
2963 int old_wp = sdkp->write_prot;
2964
2965 set_disk_ro(sdkp->disk, 0);
2966 if (sdp->skip_ms_page_3f) {
2967 sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2968 return;
2969 }
2970
2971 if (sdp->use_192_bytes_for_3f) {
2972 res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 192, &data, NULL);
2973 } else {
2974 /*
2975 * First attempt: ask for all pages (0x3F), but only 4 bytes.
2976 * We have to start carefully: some devices hang if we ask
2977 * for more than is available.
2978 */
2979 res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 4, &data, NULL);
2980
2981 /*
2982 * Second attempt: ask for page 0 When only page 0 is
2983 * implemented, a request for page 3F may return Sense Key
2984 * 5: Illegal Request, Sense Code 24: Invalid field in
2985 * CDB.
2986 */
2987 if (res < 0)
2988 res = sd_do_mode_sense(sdkp, 0, 0, buffer, 4, &data, NULL);
2989
2990 /*
2991 * Third attempt: ask 255 bytes, as we did earlier.
2992 */
2993 if (res < 0)
2994 res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 255,
2995 &data, NULL);
2996 }
2997
2998 if (res < 0) {
2999 sd_first_printk(KERN_WARNING, sdkp,
3000 "Test WP failed, assume Write Enabled\n");
3001 } else {
3002 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
3003 set_disk_ro(sdkp->disk, sdkp->write_prot);
3004 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
3005 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
3006 sdkp->write_prot ? "on" : "off");
3007 sd_printk(KERN_DEBUG, sdkp, "Mode Sense: %4ph\n", buffer);
3008 }
3009 }
3010}
3011
3012/*
3013 * sd_read_cache_type - called only from sd_revalidate_disk()
3014 * called with buffer of length SD_BUF_SIZE
3015 */
3016static void
3017sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
3018{
3019 int len = 0, res;
3020 struct scsi_device *sdp = sdkp->device;
3021
3022 int dbd;
3023 int modepage;
3024 int first_len;
3025 struct scsi_mode_data data;
3026 struct scsi_sense_hdr sshdr;
3027 int old_wce = sdkp->WCE;
3028 int old_rcd = sdkp->RCD;
3029 int old_dpofua = sdkp->DPOFUA;
3030
3031
3032 if (sdkp->cache_override)
3033 return;
3034
3035 first_len = 4;
3036 if (sdp->skip_ms_page_8) {
3037 if (sdp->type == TYPE_RBC)
3038 goto defaults;
3039 else {
3040 if (sdp->skip_ms_page_3f)
3041 goto defaults;
3042 modepage = 0x3F;
3043 if (sdp->use_192_bytes_for_3f)
3044 first_len = 192;
3045 dbd = 0;
3046 }
3047 } else if (sdp->type == TYPE_RBC) {
3048 modepage = 6;
3049 dbd = 8;
3050 } else {
3051 modepage = 8;
3052 dbd = 0;
3053 }
3054
3055 /* cautiously ask */
3056 res = sd_do_mode_sense(sdkp, dbd, modepage, buffer, first_len,
3057 &data, &sshdr);
3058
3059 if (res < 0)
3060 goto bad_sense;
3061
3062 if (!data.header_length) {
3063 modepage = 6;
3064 first_len = 0;
3065 sd_first_printk(KERN_ERR, sdkp,
3066 "Missing header in MODE_SENSE response\n");
3067 }
3068
3069 /* that went OK, now ask for the proper length */
3070 len = data.length;
3071
3072 /*
3073 * We're only interested in the first three bytes, actually.
3074 * But the data cache page is defined for the first 20.
3075 */
3076 if (len < 3)
3077 goto bad_sense;
3078 else if (len > SD_BUF_SIZE) {
3079 sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
3080 "data from %d to %d bytes\n", len, SD_BUF_SIZE);
3081 len = SD_BUF_SIZE;
3082 }
3083 if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
3084 len = 192;
3085
3086 /* Get the data */
3087 if (len > first_len)
3088 res = sd_do_mode_sense(sdkp, dbd, modepage, buffer, len,
3089 &data, &sshdr);
3090
3091 if (!res) {
3092 int offset = data.header_length + data.block_descriptor_length;
3093
3094 while (offset < len) {
3095 u8 page_code = buffer[offset] & 0x3F;
3096 u8 spf = buffer[offset] & 0x40;
3097
3098 if (page_code == 8 || page_code == 6) {
3099 /* We're interested only in the first 3 bytes.
3100 */
3101 if (len - offset <= 2) {
3102 sd_first_printk(KERN_ERR, sdkp,
3103 "Incomplete mode parameter "
3104 "data\n");
3105 goto defaults;
3106 } else {
3107 modepage = page_code;
3108 goto Page_found;
3109 }
3110 } else {
3111 /* Go to the next page */
3112 if (spf && len - offset > 3)
3113 offset += 4 + (buffer[offset+2] << 8) +
3114 buffer[offset+3];
3115 else if (!spf && len - offset > 1)
3116 offset += 2 + buffer[offset+1];
3117 else {
3118 sd_first_printk(KERN_ERR, sdkp,
3119 "Incomplete mode "
3120 "parameter data\n");
3121 goto defaults;
3122 }
3123 }
3124 }
3125
3126 sd_first_printk(KERN_WARNING, sdkp,
3127 "No Caching mode page found\n");
3128 goto defaults;
3129
3130 Page_found:
3131 if (modepage == 8) {
3132 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
3133 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
3134 } else {
3135 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
3136 sdkp->RCD = 0;
3137 }
3138
3139 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
3140 if (sdp->broken_fua) {
3141 sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
3142 sdkp->DPOFUA = 0;
3143 } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw &&
3144 !sdkp->device->use_16_for_rw) {
3145 sd_first_printk(KERN_NOTICE, sdkp,
3146 "Uses READ/WRITE(6), disabling FUA\n");
3147 sdkp->DPOFUA = 0;
3148 }
3149
3150 /* No cache flush allowed for write protected devices */
3151 if (sdkp->WCE && sdkp->write_prot)
3152 sdkp->WCE = 0;
3153
3154 if (sdkp->first_scan || old_wce != sdkp->WCE ||
3155 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
3156 sd_printk(KERN_NOTICE, sdkp,
3157 "Write cache: %s, read cache: %s, %s\n",
3158 sdkp->WCE ? "enabled" : "disabled",
3159 sdkp->RCD ? "disabled" : "enabled",
3160 sdkp->DPOFUA ? "supports DPO and FUA"
3161 : "doesn't support DPO or FUA");
3162
3163 return;
3164 }
3165
3166bad_sense:
3167 if (res == -EIO && scsi_sense_valid(&sshdr) &&
3168 sshdr.sense_key == ILLEGAL_REQUEST &&
3169 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
3170 /* Invalid field in CDB */
3171 sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
3172 else
3173 sd_first_printk(KERN_ERR, sdkp,
3174 "Asking for cache data failed\n");
3175
3176defaults:
3177 if (sdp->wce_default_on) {
3178 sd_first_printk(KERN_NOTICE, sdkp,
3179 "Assuming drive cache: write back\n");
3180 sdkp->WCE = 1;
3181 } else {
3182 sd_first_printk(KERN_WARNING, sdkp,
3183 "Assuming drive cache: write through\n");
3184 sdkp->WCE = 0;
3185 }
3186 sdkp->RCD = 0;
3187 sdkp->DPOFUA = 0;
3188}
3189
3190static bool sd_is_perm_stream(struct scsi_disk *sdkp, unsigned int stream_id)
3191{
3192 u8 cdb[16] = { SERVICE_ACTION_IN_16, SAI_GET_STREAM_STATUS };
3193 struct {
3194 struct scsi_stream_status_header h;
3195 struct scsi_stream_status s;
3196 } buf;
3197 struct scsi_device *sdev = sdkp->device;
3198 struct scsi_sense_hdr sshdr;
3199 const struct scsi_exec_args exec_args = {
3200 .sshdr = &sshdr,
3201 };
3202 int res;
3203
3204 put_unaligned_be16(stream_id, &cdb[4]);
3205 put_unaligned_be32(sizeof(buf), &cdb[10]);
3206
3207 res = scsi_execute_cmd(sdev, cdb, REQ_OP_DRV_IN, &buf, sizeof(buf),
3208 SD_TIMEOUT, sdkp->max_retries, &exec_args);
3209 if (res < 0)
3210 return false;
3211 if (scsi_status_is_check_condition(res) && scsi_sense_valid(&sshdr))
3212 sd_print_sense_hdr(sdkp, &sshdr);
3213 if (res)
3214 return false;
3215 if (get_unaligned_be32(&buf.h.len) < sizeof(struct scsi_stream_status))
3216 return false;
3217 return buf.h.stream_status[0].perm;
3218}
3219
3220static void sd_read_io_hints(struct scsi_disk *sdkp, unsigned char *buffer)
3221{
3222 struct scsi_device *sdp = sdkp->device;
3223 const struct scsi_io_group_descriptor *desc, *start, *end;
3224 u16 permanent_stream_count_old;
3225 struct scsi_sense_hdr sshdr;
3226 struct scsi_mode_data data;
3227 int res;
3228
3229 if (sdp->sdev_bflags & BLIST_SKIP_IO_HINTS)
3230 return;
3231
3232 res = scsi_mode_sense(sdp, /*dbd=*/0x8, /*modepage=*/0x0a,
3233 /*subpage=*/0x05, buffer, SD_BUF_SIZE, SD_TIMEOUT,
3234 sdkp->max_retries, &data, &sshdr);
3235 if (res < 0)
3236 return;
3237 start = (void *)buffer + data.header_length + 16;
3238 end = (void *)buffer + ALIGN_DOWN(data.header_length + data.length,
3239 sizeof(*end));
3240 /*
3241 * From "SBC-5 Constrained Streams with Data Lifetimes": Device severs
3242 * should assign the lowest numbered stream identifiers to permanent
3243 * streams.
3244 */
3245 for (desc = start; desc < end; desc++)
3246 if (!desc->st_enble || !sd_is_perm_stream(sdkp, desc - start))
3247 break;
3248 permanent_stream_count_old = sdkp->permanent_stream_count;
3249 sdkp->permanent_stream_count = desc - start;
3250 if (sdkp->rscs && sdkp->permanent_stream_count < 2)
3251 sd_printk(KERN_INFO, sdkp,
3252 "Unexpected: RSCS has been set and the permanent stream count is %u\n",
3253 sdkp->permanent_stream_count);
3254 else if (sdkp->permanent_stream_count != permanent_stream_count_old)
3255 sd_printk(KERN_INFO, sdkp, "permanent stream count = %d\n",
3256 sdkp->permanent_stream_count);
3257}
3258
3259/*
3260 * The ATO bit indicates whether the DIF application tag is available
3261 * for use by the operating system.
3262 */
3263static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
3264{
3265 int res, offset;
3266 struct scsi_device *sdp = sdkp->device;
3267 struct scsi_mode_data data;
3268 struct scsi_sense_hdr sshdr;
3269
3270 if (sdp->type != TYPE_DISK && sdp->type != TYPE_ZBC)
3271 return;
3272
3273 if (sdkp->protection_type == 0)
3274 return;
3275
3276 res = scsi_mode_sense(sdp, 1, 0x0a, 0, buffer, 36, SD_TIMEOUT,
3277 sdkp->max_retries, &data, &sshdr);
3278
3279 if (res < 0 || !data.header_length ||
3280 data.length < 6) {
3281 sd_first_printk(KERN_WARNING, sdkp,
3282 "getting Control mode page failed, assume no ATO\n");
3283
3284 if (res == -EIO && scsi_sense_valid(&sshdr))
3285 sd_print_sense_hdr(sdkp, &sshdr);
3286
3287 return;
3288 }
3289
3290 offset = data.header_length + data.block_descriptor_length;
3291
3292 if ((buffer[offset] & 0x3f) != 0x0a) {
3293 sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
3294 return;
3295 }
3296
3297 if ((buffer[offset + 5] & 0x80) == 0)
3298 return;
3299
3300 sdkp->ATO = 1;
3301
3302 return;
3303}
3304
3305static unsigned int sd_discard_mode(struct scsi_disk *sdkp)
3306{
3307 if (!sdkp->lbpme)
3308 return SD_LBP_FULL;
3309
3310 if (!sdkp->lbpvpd) {
3311 /* LBP VPD page not provided */
3312 if (sdkp->max_unmap_blocks)
3313 return SD_LBP_UNMAP;
3314 return SD_LBP_WS16;
3315 }
3316
3317 /* LBP VPD page tells us what to use */
3318 if (sdkp->lbpu && sdkp->max_unmap_blocks)
3319 return SD_LBP_UNMAP;
3320 if (sdkp->lbpws)
3321 return SD_LBP_WS16;
3322 if (sdkp->lbpws10)
3323 return SD_LBP_WS10;
3324 return SD_LBP_DISABLE;
3325}
3326
3327/*
3328 * Query disk device for preferred I/O sizes.
3329 */
3330static void sd_read_block_limits(struct scsi_disk *sdkp,
3331 struct queue_limits *lim)
3332{
3333 struct scsi_vpd *vpd;
3334
3335 rcu_read_lock();
3336
3337 vpd = rcu_dereference(sdkp->device->vpd_pgb0);
3338 if (!vpd || vpd->len < 16)
3339 goto out;
3340
3341 sdkp->min_xfer_blocks = get_unaligned_be16(&vpd->data[6]);
3342 sdkp->max_xfer_blocks = get_unaligned_be32(&vpd->data[8]);
3343 sdkp->opt_xfer_blocks = get_unaligned_be32(&vpd->data[12]);
3344
3345 if (vpd->len >= 64) {
3346 unsigned int lba_count, desc_count;
3347
3348 sdkp->max_ws_blocks = (u32)get_unaligned_be64(&vpd->data[36]);
3349
3350 if (!sdkp->lbpme)
3351 goto config_atomic;
3352
3353 lba_count = get_unaligned_be32(&vpd->data[20]);
3354 desc_count = get_unaligned_be32(&vpd->data[24]);
3355
3356 if (lba_count && desc_count)
3357 sdkp->max_unmap_blocks = lba_count;
3358
3359 sdkp->unmap_granularity = get_unaligned_be32(&vpd->data[28]);
3360
3361 if (vpd->data[32] & 0x80)
3362 sdkp->unmap_alignment =
3363 get_unaligned_be32(&vpd->data[32]) & ~(1 << 31);
3364
3365config_atomic:
3366 sdkp->max_atomic = get_unaligned_be32(&vpd->data[44]);
3367 sdkp->atomic_alignment = get_unaligned_be32(&vpd->data[48]);
3368 sdkp->atomic_granularity = get_unaligned_be32(&vpd->data[52]);
3369 sdkp->max_atomic_with_boundary = get_unaligned_be32(&vpd->data[56]);
3370 sdkp->max_atomic_boundary = get_unaligned_be32(&vpd->data[60]);
3371
3372 sd_config_atomic(sdkp, lim);
3373 }
3374
3375 out:
3376 rcu_read_unlock();
3377}
3378
3379/* Parse the Block Limits Extension VPD page (0xb7) */
3380static void sd_read_block_limits_ext(struct scsi_disk *sdkp)
3381{
3382 struct scsi_vpd *vpd;
3383
3384 rcu_read_lock();
3385 vpd = rcu_dereference(sdkp->device->vpd_pgb7);
3386 if (vpd && vpd->len >= 2)
3387 sdkp->rscs = vpd->data[5] & 1;
3388 rcu_read_unlock();
3389}
3390
3391/* Query block device characteristics */
3392static void sd_read_block_characteristics(struct scsi_disk *sdkp,
3393 struct queue_limits *lim)
3394{
3395 struct scsi_vpd *vpd;
3396 u16 rot;
3397
3398 rcu_read_lock();
3399 vpd = rcu_dereference(sdkp->device->vpd_pgb1);
3400
3401 if (!vpd || vpd->len <= 8) {
3402 rcu_read_unlock();
3403 return;
3404 }
3405
3406 rot = get_unaligned_be16(&vpd->data[4]);
3407 sdkp->zoned = (vpd->data[8] >> 4) & 3;
3408 rcu_read_unlock();
3409
3410 if (rot == 1)
3411 lim->features &= ~(BLK_FEAT_ROTATIONAL | BLK_FEAT_ADD_RANDOM);
3412
3413 if (!sdkp->first_scan)
3414 return;
3415
3416 if (sdkp->device->type == TYPE_ZBC)
3417 sd_printk(KERN_NOTICE, sdkp, "Host-managed zoned block device\n");
3418 else if (sdkp->zoned == 1)
3419 sd_printk(KERN_NOTICE, sdkp, "Host-aware SMR disk used as regular disk\n");
3420 else if (sdkp->zoned == 2)
3421 sd_printk(KERN_NOTICE, sdkp, "Drive-managed SMR disk\n");
3422}
3423
3424/**
3425 * sd_read_block_provisioning - Query provisioning VPD page
3426 * @sdkp: disk to query
3427 */
3428static void sd_read_block_provisioning(struct scsi_disk *sdkp)
3429{
3430 struct scsi_vpd *vpd;
3431
3432 if (sdkp->lbpme == 0)
3433 return;
3434
3435 rcu_read_lock();
3436 vpd = rcu_dereference(sdkp->device->vpd_pgb2);
3437
3438 if (!vpd || vpd->len < 8) {
3439 rcu_read_unlock();
3440 return;
3441 }
3442
3443 sdkp->lbpvpd = 1;
3444 sdkp->lbpu = (vpd->data[5] >> 7) & 1; /* UNMAP */
3445 sdkp->lbpws = (vpd->data[5] >> 6) & 1; /* WRITE SAME(16) w/ UNMAP */
3446 sdkp->lbpws10 = (vpd->data[5] >> 5) & 1; /* WRITE SAME(10) w/ UNMAP */
3447 rcu_read_unlock();
3448}
3449
3450static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
3451{
3452 struct scsi_device *sdev = sdkp->device;
3453
3454 if (sdev->host->no_write_same) {
3455 sdev->no_write_same = 1;
3456
3457 return;
3458 }
3459
3460 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY, 0) < 0) {
3461 struct scsi_vpd *vpd;
3462
3463 sdev->no_report_opcodes = 1;
3464
3465 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
3466 * CODES is unsupported and the device has an ATA
3467 * Information VPD page (SAT).
3468 */
3469 rcu_read_lock();
3470 vpd = rcu_dereference(sdev->vpd_pg89);
3471 if (vpd)
3472 sdev->no_write_same = 1;
3473 rcu_read_unlock();
3474 }
3475
3476 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16, 0) == 1)
3477 sdkp->ws16 = 1;
3478
3479 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME, 0) == 1)
3480 sdkp->ws10 = 1;
3481}
3482
3483static void sd_read_security(struct scsi_disk *sdkp, unsigned char *buffer)
3484{
3485 struct scsi_device *sdev = sdkp->device;
3486
3487 if (!sdev->security_supported)
3488 return;
3489
3490 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3491 SECURITY_PROTOCOL_IN, 0) == 1 &&
3492 scsi_report_opcode(sdev, buffer, SD_BUF_SIZE,
3493 SECURITY_PROTOCOL_OUT, 0) == 1)
3494 sdkp->security = 1;
3495}
3496
3497static inline sector_t sd64_to_sectors(struct scsi_disk *sdkp, u8 *buf)
3498{
3499 return logical_to_sectors(sdkp->device, get_unaligned_be64(buf));
3500}
3501
3502/**
3503 * sd_read_cpr - Query concurrent positioning ranges
3504 * @sdkp: disk to query
3505 */
3506static void sd_read_cpr(struct scsi_disk *sdkp)
3507{
3508 struct blk_independent_access_ranges *iars = NULL;
3509 unsigned char *buffer = NULL;
3510 unsigned int nr_cpr = 0;
3511 int i, vpd_len, buf_len = SD_BUF_SIZE;
3512 u8 *desc;
3513
3514 /*
3515 * We need to have the capacity set first for the block layer to be
3516 * able to check the ranges.
3517 */
3518 if (sdkp->first_scan)
3519 return;
3520
3521 if (!sdkp->capacity)
3522 goto out;
3523
3524 /*
3525 * Concurrent Positioning Ranges VPD: there can be at most 256 ranges,
3526 * leading to a maximum page size of 64 + 256*32 bytes.
3527 */
3528 buf_len = 64 + 256*32;
3529 buffer = kmalloc(buf_len, GFP_KERNEL);
3530 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb9, buffer, buf_len))
3531 goto out;
3532
3533 /* We must have at least a 64B header and one 32B range descriptor */
3534 vpd_len = get_unaligned_be16(&buffer[2]) + 4;
3535 if (vpd_len > buf_len || vpd_len < 64 + 32 || (vpd_len & 31)) {
3536 sd_printk(KERN_ERR, sdkp,
3537 "Invalid Concurrent Positioning Ranges VPD page\n");
3538 goto out;
3539 }
3540
3541 nr_cpr = (vpd_len - 64) / 32;
3542 if (nr_cpr == 1) {
3543 nr_cpr = 0;
3544 goto out;
3545 }
3546
3547 iars = disk_alloc_independent_access_ranges(sdkp->disk, nr_cpr);
3548 if (!iars) {
3549 nr_cpr = 0;
3550 goto out;
3551 }
3552
3553 desc = &buffer[64];
3554 for (i = 0; i < nr_cpr; i++, desc += 32) {
3555 if (desc[0] != i) {
3556 sd_printk(KERN_ERR, sdkp,
3557 "Invalid Concurrent Positioning Range number\n");
3558 nr_cpr = 0;
3559 break;
3560 }
3561
3562 iars->ia_range[i].sector = sd64_to_sectors(sdkp, desc + 8);
3563 iars->ia_range[i].nr_sectors = sd64_to_sectors(sdkp, desc + 16);
3564 }
3565
3566out:
3567 disk_set_independent_access_ranges(sdkp->disk, iars);
3568 if (nr_cpr && sdkp->nr_actuators != nr_cpr) {
3569 sd_printk(KERN_NOTICE, sdkp,
3570 "%u concurrent positioning ranges\n", nr_cpr);
3571 sdkp->nr_actuators = nr_cpr;
3572 }
3573
3574 kfree(buffer);
3575}
3576
3577static bool sd_validate_min_xfer_size(struct scsi_disk *sdkp)
3578{
3579 struct scsi_device *sdp = sdkp->device;
3580 unsigned int min_xfer_bytes =
3581 logical_to_bytes(sdp, sdkp->min_xfer_blocks);
3582
3583 if (sdkp->min_xfer_blocks == 0)
3584 return false;
3585
3586 if (min_xfer_bytes & (sdkp->physical_block_size - 1)) {
3587 sd_first_printk(KERN_WARNING, sdkp,
3588 "Preferred minimum I/O size %u bytes not a " \
3589 "multiple of physical block size (%u bytes)\n",
3590 min_xfer_bytes, sdkp->physical_block_size);
3591 sdkp->min_xfer_blocks = 0;
3592 return false;
3593 }
3594
3595 sd_first_printk(KERN_INFO, sdkp, "Preferred minimum I/O size %u bytes\n",
3596 min_xfer_bytes);
3597 return true;
3598}
3599
3600/*
3601 * Determine the device's preferred I/O size for reads and writes
3602 * unless the reported value is unreasonably small, large, not a
3603 * multiple of the physical block size, or simply garbage.
3604 */
3605static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp,
3606 unsigned int dev_max)
3607{
3608 struct scsi_device *sdp = sdkp->device;
3609 unsigned int opt_xfer_bytes =
3610 logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
3611 unsigned int min_xfer_bytes =
3612 logical_to_bytes(sdp, sdkp->min_xfer_blocks);
3613
3614 if (sdkp->opt_xfer_blocks == 0)
3615 return false;
3616
3617 if (sdkp->opt_xfer_blocks > dev_max) {
3618 sd_first_printk(KERN_WARNING, sdkp,
3619 "Optimal transfer size %u logical blocks " \
3620 "> dev_max (%u logical blocks)\n",
3621 sdkp->opt_xfer_blocks, dev_max);
3622 return false;
3623 }
3624
3625 if (sdkp->opt_xfer_blocks > SD_DEF_XFER_BLOCKS) {
3626 sd_first_printk(KERN_WARNING, sdkp,
3627 "Optimal transfer size %u logical blocks " \
3628 "> sd driver limit (%u logical blocks)\n",
3629 sdkp->opt_xfer_blocks, SD_DEF_XFER_BLOCKS);
3630 return false;
3631 }
3632
3633 if (opt_xfer_bytes < PAGE_SIZE) {
3634 sd_first_printk(KERN_WARNING, sdkp,
3635 "Optimal transfer size %u bytes < " \
3636 "PAGE_SIZE (%u bytes)\n",
3637 opt_xfer_bytes, (unsigned int)PAGE_SIZE);
3638 return false;
3639 }
3640
3641 if (min_xfer_bytes && opt_xfer_bytes % min_xfer_bytes) {
3642 sd_first_printk(KERN_WARNING, sdkp,
3643 "Optimal transfer size %u bytes not a " \
3644 "multiple of preferred minimum block " \
3645 "size (%u bytes)\n",
3646 opt_xfer_bytes, min_xfer_bytes);
3647 return false;
3648 }
3649
3650 if (opt_xfer_bytes & (sdkp->physical_block_size - 1)) {
3651 sd_first_printk(KERN_WARNING, sdkp,
3652 "Optimal transfer size %u bytes not a " \
3653 "multiple of physical block size (%u bytes)\n",
3654 opt_xfer_bytes, sdkp->physical_block_size);
3655 return false;
3656 }
3657
3658 sd_first_printk(KERN_INFO, sdkp, "Optimal transfer size %u bytes\n",
3659 opt_xfer_bytes);
3660 return true;
3661}
3662
3663static void sd_read_block_zero(struct scsi_disk *sdkp)
3664{
3665 struct scsi_device *sdev = sdkp->device;
3666 unsigned int buf_len = sdev->sector_size;
3667 u8 *buffer, cmd[16] = { };
3668
3669 buffer = kmalloc(buf_len, GFP_KERNEL);
3670 if (!buffer)
3671 return;
3672
3673 if (sdev->use_16_for_rw) {
3674 cmd[0] = READ_16;
3675 put_unaligned_be64(0, &cmd[2]); /* Logical block address 0 */
3676 put_unaligned_be32(1, &cmd[10]);/* Transfer 1 logical block */
3677 } else {
3678 cmd[0] = READ_10;
3679 put_unaligned_be32(0, &cmd[2]); /* Logical block address 0 */
3680 put_unaligned_be16(1, &cmd[7]); /* Transfer 1 logical block */
3681 }
3682
3683 scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, buffer, buf_len,
3684 SD_TIMEOUT, sdkp->max_retries, NULL);
3685 kfree(buffer);
3686}
3687
3688/**
3689 * sd_revalidate_disk - called the first time a new disk is seen,
3690 * performs disk spin up, read_capacity, etc.
3691 * @disk: struct gendisk we care about
3692 **/
3693static int sd_revalidate_disk(struct gendisk *disk)
3694{
3695 struct scsi_disk *sdkp = scsi_disk(disk);
3696 struct scsi_device *sdp = sdkp->device;
3697 sector_t old_capacity = sdkp->capacity;
3698 struct queue_limits lim;
3699 unsigned char *buffer;
3700 unsigned int dev_max;
3701 int err;
3702
3703 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
3704 "sd_revalidate_disk\n"));
3705
3706 /*
3707 * If the device is offline, don't try and read capacity or any
3708 * of the other niceties.
3709 */
3710 if (!scsi_device_online(sdp))
3711 goto out;
3712
3713 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
3714 if (!buffer) {
3715 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
3716 "allocation failure.\n");
3717 goto out;
3718 }
3719
3720 sd_spinup_disk(sdkp);
3721
3722 lim = queue_limits_start_update(sdkp->disk->queue);
3723
3724 /*
3725 * Without media there is no reason to ask; moreover, some devices
3726 * react badly if we do.
3727 */
3728 if (sdkp->media_present) {
3729 sd_read_capacity(sdkp, &lim, buffer);
3730 /*
3731 * Some USB/UAS devices return generic values for mode pages
3732 * until the media has been accessed. Trigger a READ operation
3733 * to force the device to populate mode pages.
3734 */
3735 if (sdp->read_before_ms)
3736 sd_read_block_zero(sdkp);
3737 /*
3738 * set the default to rotational. All non-rotational devices
3739 * support the block characteristics VPD page, which will
3740 * cause this to be updated correctly and any device which
3741 * doesn't support it should be treated as rotational.
3742 */
3743 lim.features |= (BLK_FEAT_ROTATIONAL | BLK_FEAT_ADD_RANDOM);
3744
3745 if (scsi_device_supports_vpd(sdp)) {
3746 sd_read_block_provisioning(sdkp);
3747 sd_read_block_limits(sdkp, &lim);
3748 sd_read_block_limits_ext(sdkp);
3749 sd_read_block_characteristics(sdkp, &lim);
3750 sd_zbc_read_zones(sdkp, &lim, buffer);
3751 }
3752
3753 sd_config_discard(sdkp, &lim, sd_discard_mode(sdkp));
3754
3755 sd_print_capacity(sdkp, old_capacity);
3756
3757 sd_read_write_protect_flag(sdkp, buffer);
3758 sd_read_cache_type(sdkp, buffer);
3759 sd_read_io_hints(sdkp, buffer);
3760 sd_read_app_tag_own(sdkp, buffer);
3761 sd_read_write_same(sdkp, buffer);
3762 sd_read_security(sdkp, buffer);
3763 sd_config_protection(sdkp, &lim);
3764 }
3765
3766 /*
3767 * We now have all cache related info, determine how we deal
3768 * with flush requests.
3769 */
3770 sd_set_flush_flag(sdkp, &lim);
3771
3772 /* Initial block count limit based on CDB TRANSFER LENGTH field size. */
3773 dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS;
3774
3775 /* Some devices report a maximum block count for READ/WRITE requests. */
3776 dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks);
3777 lim.max_dev_sectors = logical_to_sectors(sdp, dev_max);
3778
3779 if (sd_validate_min_xfer_size(sdkp))
3780 lim.io_min = logical_to_bytes(sdp, sdkp->min_xfer_blocks);
3781 else
3782 lim.io_min = 0;
3783
3784 /*
3785 * Limit default to SCSI host optimal sector limit if set. There may be
3786 * an impact on performance for when the size of a request exceeds this
3787 * host limit.
3788 */
3789 lim.io_opt = sdp->host->opt_sectors << SECTOR_SHIFT;
3790 if (sd_validate_opt_xfer_size(sdkp, dev_max)) {
3791 lim.io_opt = min_not_zero(lim.io_opt,
3792 logical_to_bytes(sdp, sdkp->opt_xfer_blocks));
3793 }
3794
3795 sdkp->first_scan = 0;
3796
3797 set_capacity_and_notify(disk, logical_to_sectors(sdp, sdkp->capacity));
3798 sd_config_write_same(sdkp, &lim);
3799 kfree(buffer);
3800
3801 err = queue_limits_commit_update_frozen(sdkp->disk->queue, &lim);
3802 if (err)
3803 return err;
3804
3805 /*
3806 * Query concurrent positioning ranges after
3807 * queue_limits_commit_update() unlocked q->limits_lock to avoid
3808 * deadlock with q->sysfs_dir_lock and q->sysfs_lock.
3809 */
3810 if (sdkp->media_present && scsi_device_supports_vpd(sdp))
3811 sd_read_cpr(sdkp);
3812
3813 /*
3814 * For a zoned drive, revalidating the zones can be done only once
3815 * the gendisk capacity is set. So if this fails, set back the gendisk
3816 * capacity to 0.
3817 */
3818 if (sd_zbc_revalidate_zones(sdkp))
3819 set_capacity_and_notify(disk, 0);
3820
3821 out:
3822 return 0;
3823}
3824
3825/**
3826 * sd_unlock_native_capacity - unlock native capacity
3827 * @disk: struct gendisk to set capacity for
3828 *
3829 * Block layer calls this function if it detects that partitions
3830 * on @disk reach beyond the end of the device. If the SCSI host
3831 * implements ->unlock_native_capacity() method, it's invoked to
3832 * give it a chance to adjust the device capacity.
3833 *
3834 * CONTEXT:
3835 * Defined by block layer. Might sleep.
3836 */
3837static void sd_unlock_native_capacity(struct gendisk *disk)
3838{
3839 struct scsi_device *sdev = scsi_disk(disk)->device;
3840
3841 if (sdev->host->hostt->unlock_native_capacity)
3842 sdev->host->hostt->unlock_native_capacity(sdev);
3843}
3844
3845/**
3846 * sd_format_disk_name - format disk name
3847 * @prefix: name prefix - ie. "sd" for SCSI disks
3848 * @index: index of the disk to format name for
3849 * @buf: output buffer
3850 * @buflen: length of the output buffer
3851 *
3852 * SCSI disk names starts at sda. The 26th device is sdz and the
3853 * 27th is sdaa. The last one for two lettered suffix is sdzz
3854 * which is followed by sdaaa.
3855 *
3856 * This is basically 26 base counting with one extra 'nil' entry
3857 * at the beginning from the second digit on and can be
3858 * determined using similar method as 26 base conversion with the
3859 * index shifted -1 after each digit is computed.
3860 *
3861 * CONTEXT:
3862 * Don't care.
3863 *
3864 * RETURNS:
3865 * 0 on success, -errno on failure.
3866 */
3867static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
3868{
3869 const int base = 'z' - 'a' + 1;
3870 char *begin = buf + strlen(prefix);
3871 char *end = buf + buflen;
3872 char *p;
3873 int unit;
3874
3875 p = end - 1;
3876 *p = '\0';
3877 unit = base;
3878 do {
3879 if (p == begin)
3880 return -EINVAL;
3881 *--p = 'a' + (index % unit);
3882 index = (index / unit) - 1;
3883 } while (index >= 0);
3884
3885 memmove(begin, p, end - p);
3886 memcpy(buf, prefix, strlen(prefix));
3887
3888 return 0;
3889}
3890
3891/**
3892 * sd_probe - called during driver initialization and whenever a
3893 * new scsi device is attached to the system. It is called once
3894 * for each scsi device (not just disks) present.
3895 * @dev: pointer to device object
3896 *
3897 * Returns 0 if successful (or not interested in this scsi device
3898 * (e.g. scanner)); 1 when there is an error.
3899 *
3900 * Note: this function is invoked from the scsi mid-level.
3901 * This function sets up the mapping between a given
3902 * <host,channel,id,lun> (found in sdp) and new device name
3903 * (e.g. /dev/sda). More precisely it is the block device major
3904 * and minor number that is chosen here.
3905 *
3906 * Assume sd_probe is not re-entrant (for time being)
3907 * Also think about sd_probe() and sd_remove() running coincidentally.
3908 **/
3909static int sd_probe(struct device *dev)
3910{
3911 struct scsi_device *sdp = to_scsi_device(dev);
3912 struct scsi_disk *sdkp;
3913 struct gendisk *gd;
3914 int index;
3915 int error;
3916
3917 scsi_autopm_get_device(sdp);
3918 error = -ENODEV;
3919 if (sdp->type != TYPE_DISK &&
3920 sdp->type != TYPE_ZBC &&
3921 sdp->type != TYPE_MOD &&
3922 sdp->type != TYPE_RBC)
3923 goto out;
3924
3925 if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) && sdp->type == TYPE_ZBC) {
3926 sdev_printk(KERN_WARNING, sdp,
3927 "Unsupported ZBC host-managed device.\n");
3928 goto out;
3929 }
3930
3931 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
3932 "sd_probe\n"));
3933
3934 error = -ENOMEM;
3935 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
3936 if (!sdkp)
3937 goto out;
3938
3939 gd = blk_mq_alloc_disk_for_queue(sdp->request_queue,
3940 &sd_bio_compl_lkclass);
3941 if (!gd)
3942 goto out_free;
3943
3944 index = ida_alloc(&sd_index_ida, GFP_KERNEL);
3945 if (index < 0) {
3946 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
3947 goto out_put;
3948 }
3949
3950 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
3951 if (error) {
3952 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
3953 goto out_free_index;
3954 }
3955
3956 sdkp->device = sdp;
3957 sdkp->disk = gd;
3958 sdkp->index = index;
3959 sdkp->max_retries = SD_MAX_RETRIES;
3960 atomic_set(&sdkp->openers, 0);
3961 atomic_set(&sdkp->device->ioerr_cnt, 0);
3962
3963 if (!sdp->request_queue->rq_timeout) {
3964 if (sdp->type != TYPE_MOD)
3965 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
3966 else
3967 blk_queue_rq_timeout(sdp->request_queue,
3968 SD_MOD_TIMEOUT);
3969 }
3970
3971 device_initialize(&sdkp->disk_dev);
3972 sdkp->disk_dev.parent = get_device(dev);
3973 sdkp->disk_dev.class = &sd_disk_class;
3974 dev_set_name(&sdkp->disk_dev, "%s", dev_name(dev));
3975
3976 error = device_add(&sdkp->disk_dev);
3977 if (error) {
3978 put_device(&sdkp->disk_dev);
3979 goto out;
3980 }
3981
3982 dev_set_drvdata(dev, sdkp);
3983
3984 gd->major = sd_major((index & 0xf0) >> 4);
3985 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
3986 gd->minors = SD_MINORS;
3987
3988 gd->fops = &sd_fops;
3989 gd->private_data = sdkp;
3990
3991 /* defaults, until the device tells us otherwise */
3992 sdp->sector_size = 512;
3993 sdkp->capacity = 0;
3994 sdkp->media_present = 1;
3995 sdkp->write_prot = 0;
3996 sdkp->cache_override = 0;
3997 sdkp->WCE = 0;
3998 sdkp->RCD = 0;
3999 sdkp->ATO = 0;
4000 sdkp->first_scan = 1;
4001 sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
4002
4003 sd_revalidate_disk(gd);
4004
4005 if (sdp->removable) {
4006 gd->flags |= GENHD_FL_REMOVABLE;
4007 gd->events |= DISK_EVENT_MEDIA_CHANGE;
4008 gd->event_flags = DISK_EVENT_FLAG_POLL | DISK_EVENT_FLAG_UEVENT;
4009 }
4010
4011 blk_pm_runtime_init(sdp->request_queue, dev);
4012 if (sdp->rpm_autosuspend) {
4013 pm_runtime_set_autosuspend_delay(dev,
4014 sdp->host->rpm_autosuspend_delay);
4015 }
4016
4017 error = device_add_disk(dev, gd, NULL);
4018 if (error) {
4019 device_unregister(&sdkp->disk_dev);
4020 put_disk(gd);
4021 goto out;
4022 }
4023
4024 if (sdkp->security) {
4025 sdkp->opal_dev = init_opal_dev(sdkp, &sd_sec_submit);
4026 if (sdkp->opal_dev)
4027 sd_printk(KERN_NOTICE, sdkp, "supports TCG Opal\n");
4028 }
4029
4030 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
4031 sdp->removable ? "removable " : "");
4032 scsi_autopm_put_device(sdp);
4033
4034 return 0;
4035
4036 out_free_index:
4037 ida_free(&sd_index_ida, index);
4038 out_put:
4039 put_disk(gd);
4040 out_free:
4041 kfree(sdkp);
4042 out:
4043 scsi_autopm_put_device(sdp);
4044 return error;
4045}
4046
4047/**
4048 * sd_remove - called whenever a scsi disk (previously recognized by
4049 * sd_probe) is detached from the system. It is called (potentially
4050 * multiple times) during sd module unload.
4051 * @dev: pointer to device object
4052 *
4053 * Note: this function is invoked from the scsi mid-level.
4054 * This function potentially frees up a device name (e.g. /dev/sdc)
4055 * that could be re-used by a subsequent sd_probe().
4056 * This function is not called when the built-in sd driver is "exit-ed".
4057 **/
4058static int sd_remove(struct device *dev)
4059{
4060 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4061
4062 scsi_autopm_get_device(sdkp->device);
4063
4064 device_del(&sdkp->disk_dev);
4065 del_gendisk(sdkp->disk);
4066 if (!sdkp->suspended)
4067 sd_shutdown(dev);
4068
4069 put_disk(sdkp->disk);
4070 return 0;
4071}
4072
4073static void scsi_disk_release(struct device *dev)
4074{
4075 struct scsi_disk *sdkp = to_scsi_disk(dev);
4076
4077 ida_free(&sd_index_ida, sdkp->index);
4078 put_device(&sdkp->device->sdev_gendev);
4079 free_opal_dev(sdkp->opal_dev);
4080
4081 kfree(sdkp);
4082}
4083
4084static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
4085{
4086 unsigned char cmd[6] = { START_STOP }; /* START_VALID */
4087 struct scsi_sense_hdr sshdr;
4088 struct scsi_failure failure_defs[] = {
4089 {
4090 /* Power on, reset, or bus device reset occurred */
4091 .sense = UNIT_ATTENTION,
4092 .asc = 0x29,
4093 .ascq = 0,
4094 .result = SAM_STAT_CHECK_CONDITION,
4095 },
4096 {
4097 /* Power on occurred */
4098 .sense = UNIT_ATTENTION,
4099 .asc = 0x29,
4100 .ascq = 1,
4101 .result = SAM_STAT_CHECK_CONDITION,
4102 },
4103 {
4104 /* SCSI bus reset */
4105 .sense = UNIT_ATTENTION,
4106 .asc = 0x29,
4107 .ascq = 2,
4108 .result = SAM_STAT_CHECK_CONDITION,
4109 },
4110 {}
4111 };
4112 struct scsi_failures failures = {
4113 .total_allowed = 3,
4114 .failure_definitions = failure_defs,
4115 };
4116 const struct scsi_exec_args exec_args = {
4117 .sshdr = &sshdr,
4118 .req_flags = BLK_MQ_REQ_PM,
4119 .failures = &failures,
4120 };
4121 struct scsi_device *sdp = sdkp->device;
4122 int res;
4123
4124 if (start)
4125 cmd[4] |= 1; /* START */
4126
4127 if (sdp->start_stop_pwr_cond)
4128 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
4129
4130 if (!scsi_device_online(sdp))
4131 return -ENODEV;
4132
4133 res = scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, NULL, 0, SD_TIMEOUT,
4134 sdkp->max_retries, &exec_args);
4135 if (res) {
4136 sd_print_result(sdkp, "Start/Stop Unit failed", res);
4137 if (res > 0 && scsi_sense_valid(&sshdr)) {
4138 sd_print_sense_hdr(sdkp, &sshdr);
4139 /* 0x3a is medium not present */
4140 if (sshdr.asc == 0x3a)
4141 res = 0;
4142 }
4143 }
4144
4145 /* SCSI error codes must not go to the generic layer */
4146 if (res)
4147 return -EIO;
4148
4149 return 0;
4150}
4151
4152/*
4153 * Send a SYNCHRONIZE CACHE instruction down to the device through
4154 * the normal SCSI command structure. Wait for the command to
4155 * complete.
4156 */
4157static void sd_shutdown(struct device *dev)
4158{
4159 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4160
4161 if (!sdkp)
4162 return; /* this can happen */
4163
4164 if (pm_runtime_suspended(dev))
4165 return;
4166
4167 if (sdkp->WCE && sdkp->media_present) {
4168 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
4169 sd_sync_cache(sdkp);
4170 }
4171
4172 if ((system_state != SYSTEM_RESTART &&
4173 sdkp->device->manage_system_start_stop) ||
4174 (system_state == SYSTEM_POWER_OFF &&
4175 sdkp->device->manage_shutdown)) {
4176 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
4177 sd_start_stop_device(sdkp, 0);
4178 }
4179}
4180
4181static inline bool sd_do_start_stop(struct scsi_device *sdev, bool runtime)
4182{
4183 return (sdev->manage_system_start_stop && !runtime) ||
4184 (sdev->manage_runtime_start_stop && runtime);
4185}
4186
4187static int sd_suspend_common(struct device *dev, bool runtime)
4188{
4189 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4190 int ret = 0;
4191
4192 if (!sdkp) /* E.g.: runtime suspend following sd_remove() */
4193 return 0;
4194
4195 if (sdkp->WCE && sdkp->media_present) {
4196 if (!sdkp->device->silence_suspend)
4197 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
4198 ret = sd_sync_cache(sdkp);
4199 /* ignore OFFLINE device */
4200 if (ret == -ENODEV)
4201 return 0;
4202
4203 if (ret)
4204 return ret;
4205 }
4206
4207 if (sd_do_start_stop(sdkp->device, runtime)) {
4208 if (!sdkp->device->silence_suspend)
4209 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
4210 /* an error is not worth aborting a system sleep */
4211 ret = sd_start_stop_device(sdkp, 0);
4212 if (!runtime)
4213 ret = 0;
4214 }
4215
4216 if (!ret)
4217 sdkp->suspended = true;
4218
4219 return ret;
4220}
4221
4222static int sd_suspend_system(struct device *dev)
4223{
4224 if (pm_runtime_suspended(dev))
4225 return 0;
4226
4227 return sd_suspend_common(dev, false);
4228}
4229
4230static int sd_suspend_runtime(struct device *dev)
4231{
4232 return sd_suspend_common(dev, true);
4233}
4234
4235static int sd_resume(struct device *dev)
4236{
4237 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4238
4239 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
4240
4241 if (opal_unlock_from_suspend(sdkp->opal_dev)) {
4242 sd_printk(KERN_NOTICE, sdkp, "OPAL unlock failed\n");
4243 return -EIO;
4244 }
4245
4246 return 0;
4247}
4248
4249static int sd_resume_common(struct device *dev, bool runtime)
4250{
4251 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4252 int ret;
4253
4254 if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
4255 return 0;
4256
4257 if (!sd_do_start_stop(sdkp->device, runtime)) {
4258 sdkp->suspended = false;
4259 return 0;
4260 }
4261
4262 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
4263 ret = sd_start_stop_device(sdkp, 1);
4264 if (!ret) {
4265 sd_resume(dev);
4266 sdkp->suspended = false;
4267 }
4268
4269 return ret;
4270}
4271
4272static int sd_resume_system(struct device *dev)
4273{
4274 if (pm_runtime_suspended(dev)) {
4275 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4276 struct scsi_device *sdp = sdkp ? sdkp->device : NULL;
4277
4278 if (sdp && sdp->force_runtime_start_on_system_start)
4279 pm_request_resume(dev);
4280
4281 return 0;
4282 }
4283
4284 return sd_resume_common(dev, false);
4285}
4286
4287static int sd_resume_runtime(struct device *dev)
4288{
4289 struct scsi_disk *sdkp = dev_get_drvdata(dev);
4290 struct scsi_device *sdp;
4291
4292 if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */
4293 return 0;
4294
4295 sdp = sdkp->device;
4296
4297 if (sdp->ignore_media_change) {
4298 /* clear the device's sense data */
4299 static const u8 cmd[10] = { REQUEST_SENSE };
4300 const struct scsi_exec_args exec_args = {
4301 .req_flags = BLK_MQ_REQ_PM,
4302 };
4303
4304 if (scsi_execute_cmd(sdp, cmd, REQ_OP_DRV_IN, NULL, 0,
4305 sdp->request_queue->rq_timeout, 1,
4306 &exec_args))
4307 sd_printk(KERN_NOTICE, sdkp,
4308 "Failed to clear sense data\n");
4309 }
4310
4311 return sd_resume_common(dev, true);
4312}
4313
4314static const struct dev_pm_ops sd_pm_ops = {
4315 .suspend = sd_suspend_system,
4316 .resume = sd_resume_system,
4317 .poweroff = sd_suspend_system,
4318 .restore = sd_resume_system,
4319 .runtime_suspend = sd_suspend_runtime,
4320 .runtime_resume = sd_resume_runtime,
4321};
4322
4323static struct scsi_driver sd_template = {
4324 .gendrv = {
4325 .name = "sd",
4326 .probe = sd_probe,
4327 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
4328 .remove = sd_remove,
4329 .shutdown = sd_shutdown,
4330 .pm = &sd_pm_ops,
4331 },
4332 .rescan = sd_rescan,
4333 .resume = sd_resume,
4334 .init_command = sd_init_command,
4335 .uninit_command = sd_uninit_command,
4336 .done = sd_done,
4337 .eh_action = sd_eh_action,
4338 .eh_reset = sd_eh_reset,
4339};
4340
4341/**
4342 * init_sd - entry point for this driver (both when built in or when
4343 * a module).
4344 *
4345 * Note: this function registers this driver with the scsi mid-level.
4346 **/
4347static int __init init_sd(void)
4348{
4349 int majors = 0, i, err;
4350
4351 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
4352
4353 for (i = 0; i < SD_MAJORS; i++) {
4354 if (__register_blkdev(sd_major(i), "sd", sd_default_probe))
4355 continue;
4356 majors++;
4357 }
4358
4359 if (!majors)
4360 return -ENODEV;
4361
4362 err = class_register(&sd_disk_class);
4363 if (err)
4364 goto err_out;
4365
4366 sd_page_pool = mempool_create_page_pool(SD_MEMPOOL_SIZE, 0);
4367 if (!sd_page_pool) {
4368 printk(KERN_ERR "sd: can't init discard page pool\n");
4369 err = -ENOMEM;
4370 goto err_out_class;
4371 }
4372
4373 err = scsi_register_driver(&sd_template.gendrv);
4374 if (err)
4375 goto err_out_driver;
4376
4377 return 0;
4378
4379err_out_driver:
4380 mempool_destroy(sd_page_pool);
4381err_out_class:
4382 class_unregister(&sd_disk_class);
4383err_out:
4384 for (i = 0; i < SD_MAJORS; i++)
4385 unregister_blkdev(sd_major(i), "sd");
4386 return err;
4387}
4388
4389/**
4390 * exit_sd - exit point for this driver (when it is a module).
4391 *
4392 * Note: this function unregisters this driver from the scsi mid-level.
4393 **/
4394static void __exit exit_sd(void)
4395{
4396 int i;
4397
4398 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
4399
4400 scsi_unregister_driver(&sd_template.gendrv);
4401 mempool_destroy(sd_page_pool);
4402
4403 class_unregister(&sd_disk_class);
4404
4405 for (i = 0; i < SD_MAJORS; i++)
4406 unregister_blkdev(sd_major(i), "sd");
4407}
4408
4409module_init(init_sd);
4410module_exit(exit_sd);
4411
4412void sd_print_sense_hdr(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
4413{
4414 scsi_print_sense_hdr(sdkp->device,
4415 sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
4416}
4417
4418void sd_print_result(const struct scsi_disk *sdkp, const char *msg, int result)
4419{
4420 const char *hb_string = scsi_hostbyte_string(result);
4421
4422 if (hb_string)
4423 sd_printk(KERN_INFO, sdkp,
4424 "%s: Result: hostbyte=%s driverbyte=%s\n", msg,
4425 hb_string ? hb_string : "invalid",
4426 "DRIVER_OK");
4427 else
4428 sd_printk(KERN_INFO, sdkp,
4429 "%s: Result: hostbyte=0x%02x driverbyte=%s\n",
4430 msg, host_byte(result), "DRIVER_OK");
4431}