Linux Audio

Check our new training course

Loading...
v3.1
 
  1/*
  2 * A SPI driver for the Ricoh RS5C348 RTC
  3 *
  4 * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
  5 *
  6 * This program is free software; you can redistribute it and/or modify
  7 * it under the terms of the GNU General Public License version 2 as
  8 * published by the Free Software Foundation.
  9 *
 10 * The board specific init code should provide characteristics of this
 11 * device:
 12 *     Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS
 13 */
 14
 15#include <linux/bcd.h>
 16#include <linux/delay.h>
 17#include <linux/device.h>
 18#include <linux/errno.h>
 19#include <linux/init.h>
 20#include <linux/kernel.h>
 21#include <linux/string.h>
 22#include <linux/slab.h>
 23#include <linux/rtc.h>
 24#include <linux/workqueue.h>
 25#include <linux/spi/spi.h>
 26
 27#define DRV_VERSION "0.2"
 28
 29#define RS5C348_REG_SECS	0
 30#define RS5C348_REG_MINS	1
 31#define RS5C348_REG_HOURS	2
 32#define RS5C348_REG_WDAY	3
 33#define RS5C348_REG_DAY	4
 34#define RS5C348_REG_MONTH	5
 35#define RS5C348_REG_YEAR	6
 36#define RS5C348_REG_CTL1	14
 37#define RS5C348_REG_CTL2	15
 38
 39#define RS5C348_SECS_MASK	0x7f
 40#define RS5C348_MINS_MASK	0x7f
 41#define RS5C348_HOURS_MASK	0x3f
 42#define RS5C348_WDAY_MASK	0x03
 43#define RS5C348_DAY_MASK	0x3f
 44#define RS5C348_MONTH_MASK	0x1f
 45
 46#define RS5C348_BIT_PM	0x20	/* REG_HOURS */
 47#define RS5C348_BIT_Y2K	0x80	/* REG_MONTH */
 48#define RS5C348_BIT_24H	0x20	/* REG_CTL1 */
 49#define RS5C348_BIT_XSTP	0x10	/* REG_CTL2 */
 50#define RS5C348_BIT_VDET	0x40	/* REG_CTL2 */
 51
 52#define RS5C348_CMD_W(addr)	(((addr) << 4) | 0x08)	/* single write */
 53#define RS5C348_CMD_R(addr)	(((addr) << 4) | 0x0c)	/* single read */
 54#define RS5C348_CMD_MW(addr)	(((addr) << 4) | 0x00)	/* burst write */
 55#define RS5C348_CMD_MR(addr)	(((addr) << 4) | 0x04)	/* burst read */
 56
 57struct rs5c348_plat_data {
 58	struct rtc_device *rtc;
 59	int rtc_24h;
 60};
 61
 62static int
 63rs5c348_rtc_set_time(struct device *dev, struct rtc_time *tm)
 64{
 65	struct spi_device *spi = to_spi_device(dev);
 66	struct rs5c348_plat_data *pdata = spi->dev.platform_data;
 67	u8 txbuf[5+7], *txp;
 68	int ret;
 69
 
 
 
 
 
 
 
 
 
 
 
 70	/* Transfer 5 bytes before writing SEC.  This gives 31us for carry. */
 71	txp = txbuf;
 72	txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
 73	txbuf[1] = 0;	/* dummy */
 74	txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
 75	txbuf[3] = 0;	/* dummy */
 76	txbuf[4] = RS5C348_CMD_MW(RS5C348_REG_SECS); /* cmd, sec, ... */
 77	txp = &txbuf[5];
 78	txp[RS5C348_REG_SECS] = bin2bcd(tm->tm_sec);
 79	txp[RS5C348_REG_MINS] = bin2bcd(tm->tm_min);
 80	if (pdata->rtc_24h) {
 81		txp[RS5C348_REG_HOURS] = bin2bcd(tm->tm_hour);
 82	} else {
 83		/* hour 0 is AM12, noon is PM12 */
 84		txp[RS5C348_REG_HOURS] = bin2bcd((tm->tm_hour + 11) % 12 + 1) |
 85			(tm->tm_hour >= 12 ? RS5C348_BIT_PM : 0);
 86	}
 87	txp[RS5C348_REG_WDAY] = bin2bcd(tm->tm_wday);
 88	txp[RS5C348_REG_DAY] = bin2bcd(tm->tm_mday);
 89	txp[RS5C348_REG_MONTH] = bin2bcd(tm->tm_mon + 1) |
 90		(tm->tm_year >= 100 ? RS5C348_BIT_Y2K : 0);
 91	txp[RS5C348_REG_YEAR] = bin2bcd(tm->tm_year % 100);
 92	/* write in one transfer to avoid data inconsistency */
 93	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), NULL, 0);
 94	udelay(62);	/* Tcsr 62us */
 95	return ret;
 96}
 97
 98static int
 99rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm)
100{
101	struct spi_device *spi = to_spi_device(dev);
102	struct rs5c348_plat_data *pdata = spi->dev.platform_data;
103	u8 txbuf[5], rxbuf[7];
104	int ret;
105
 
 
 
 
 
 
 
 
 
 
106	/* Transfer 5 byte befores reading SEC.  This gives 31us for carry. */
107	txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
108	txbuf[1] = 0;	/* dummy */
109	txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
110	txbuf[3] = 0;	/* dummy */
111	txbuf[4] = RS5C348_CMD_MR(RS5C348_REG_SECS); /* cmd, sec, ... */
112
113	/* read in one transfer to avoid data inconsistency */
114	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
115				  rxbuf, sizeof(rxbuf));
116	udelay(62);	/* Tcsr 62us */
117	if (ret < 0)
118		return ret;
119
120	tm->tm_sec = bcd2bin(rxbuf[RS5C348_REG_SECS] & RS5C348_SECS_MASK);
121	tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK);
122	tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK);
123	if (!pdata->rtc_24h) {
124		tm->tm_hour %= 12;
125		if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM)
 
126			tm->tm_hour += 12;
 
 
127	}
128	tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK);
129	tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK);
130	tm->tm_mon =
131		bcd2bin(rxbuf[RS5C348_REG_MONTH] & RS5C348_MONTH_MASK) - 1;
132	/* year is 1900 + tm->tm_year */
133	tm->tm_year = bcd2bin(rxbuf[RS5C348_REG_YEAR]) +
134		((rxbuf[RS5C348_REG_MONTH] & RS5C348_BIT_Y2K) ? 100 : 0);
135
136	if (rtc_valid_tm(tm) < 0) {
137		dev_err(&spi->dev, "retrieved date/time is not valid.\n");
138		rtc_time_to_tm(0, tm);
139	}
140
141	return 0;
142}
143
144static const struct rtc_class_ops rs5c348_rtc_ops = {
145	.read_time	= rs5c348_rtc_read_time,
146	.set_time	= rs5c348_rtc_set_time,
147};
148
149static struct spi_driver rs5c348_driver;
150
151static int __devinit rs5c348_probe(struct spi_device *spi)
152{
153	int ret;
154	struct rtc_device *rtc;
155	struct rs5c348_plat_data *pdata;
156
157	pdata = kzalloc(sizeof(struct rs5c348_plat_data), GFP_KERNEL);
 
158	if (!pdata)
159		return -ENOMEM;
160	spi->dev.platform_data = pdata;
161
162	/* Check D7 of SECOND register */
163	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
164	if (ret < 0 || (ret & 0x80)) {
165		dev_err(&spi->dev, "not found.\n");
166		goto kfree_exit;
167	}
168
169	dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n");
170	dev_info(&spi->dev, "spiclk %u KHz.\n",
171		 (spi->max_speed_hz + 500) / 1000);
172
173	/* turn RTC on if it was not on */
174	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
175	if (ret < 0)
176		goto kfree_exit;
177	if (ret & (RS5C348_BIT_XSTP | RS5C348_BIT_VDET)) {
178		u8 buf[2];
179		struct rtc_time tm;
180		if (ret & RS5C348_BIT_VDET)
181			dev_warn(&spi->dev, "voltage-low detected.\n");
182		if (ret & RS5C348_BIT_XSTP)
183			dev_warn(&spi->dev, "oscillator-stop detected.\n");
184		rtc_time_to_tm(0, &tm);	/* 1970/1/1 */
185		ret = rs5c348_rtc_set_time(&spi->dev, &tm);
186		if (ret < 0)
187			goto kfree_exit;
188		buf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
189		buf[1] = 0;
190		ret = spi_write_then_read(spi, buf, sizeof(buf), NULL, 0);
191		if (ret < 0)
192			goto kfree_exit;
193	}
194
195	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
196	if (ret < 0)
197		goto kfree_exit;
198	if (ret & RS5C348_BIT_24H)
199		pdata->rtc_24h = 1;
200
201	rtc = rtc_device_register(rs5c348_driver.driver.name, &spi->dev,
202				  &rs5c348_rtc_ops, THIS_MODULE);
203
204	if (IS_ERR(rtc)) {
205		ret = PTR_ERR(rtc);
206		goto kfree_exit;
207	}
208
209	pdata->rtc = rtc;
210
211	return 0;
212 kfree_exit:
213	kfree(pdata);
214	return ret;
215}
216
217static int __devexit rs5c348_remove(struct spi_device *spi)
218{
219	struct rs5c348_plat_data *pdata = spi->dev.platform_data;
220	struct rtc_device *rtc = pdata->rtc;
221
222	if (rtc)
223		rtc_device_unregister(rtc);
224	kfree(pdata);
225	return 0;
226}
227
228static struct spi_driver rs5c348_driver = {
229	.driver = {
230		.name	= "rtc-rs5c348",
231		.bus	= &spi_bus_type,
232		.owner	= THIS_MODULE,
233	},
234	.probe	= rs5c348_probe,
235	.remove	= __devexit_p(rs5c348_remove),
236};
237
238static __init int rs5c348_init(void)
239{
240	return spi_register_driver(&rs5c348_driver);
241}
242
243static __exit void rs5c348_exit(void)
244{
245	spi_unregister_driver(&rs5c348_driver);
246}
247
248module_init(rs5c348_init);
249module_exit(rs5c348_exit);
250
251MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
252MODULE_DESCRIPTION("Ricoh RS5C348 RTC driver");
253MODULE_LICENSE("GPL");
254MODULE_VERSION(DRV_VERSION);
255MODULE_ALIAS("spi:rtc-rs5c348");
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * A SPI driver for the Ricoh RS5C348 RTC
  4 *
  5 * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
  6 *
 
 
 
 
  7 * The board specific init code should provide characteristics of this
  8 * device:
  9 *     Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS
 10 */
 11
 12#include <linux/bcd.h>
 13#include <linux/delay.h>
 14#include <linux/device.h>
 15#include <linux/errno.h>
 16#include <linux/init.h>
 17#include <linux/kernel.h>
 18#include <linux/string.h>
 19#include <linux/slab.h>
 20#include <linux/rtc.h>
 21#include <linux/workqueue.h>
 22#include <linux/spi/spi.h>
 23#include <linux/module.h>
 
 24
 25#define RS5C348_REG_SECS	0
 26#define RS5C348_REG_MINS	1
 27#define RS5C348_REG_HOURS	2
 28#define RS5C348_REG_WDAY	3
 29#define RS5C348_REG_DAY	4
 30#define RS5C348_REG_MONTH	5
 31#define RS5C348_REG_YEAR	6
 32#define RS5C348_REG_CTL1	14
 33#define RS5C348_REG_CTL2	15
 34
 35#define RS5C348_SECS_MASK	0x7f
 36#define RS5C348_MINS_MASK	0x7f
 37#define RS5C348_HOURS_MASK	0x3f
 38#define RS5C348_WDAY_MASK	0x03
 39#define RS5C348_DAY_MASK	0x3f
 40#define RS5C348_MONTH_MASK	0x1f
 41
 42#define RS5C348_BIT_PM	0x20	/* REG_HOURS */
 43#define RS5C348_BIT_Y2K	0x80	/* REG_MONTH */
 44#define RS5C348_BIT_24H	0x20	/* REG_CTL1 */
 45#define RS5C348_BIT_XSTP	0x10	/* REG_CTL2 */
 46#define RS5C348_BIT_VDET	0x40	/* REG_CTL2 */
 47
 48#define RS5C348_CMD_W(addr)	(((addr) << 4) | 0x08)	/* single write */
 49#define RS5C348_CMD_R(addr)	(((addr) << 4) | 0x0c)	/* single read */
 50#define RS5C348_CMD_MW(addr)	(((addr) << 4) | 0x00)	/* burst write */
 51#define RS5C348_CMD_MR(addr)	(((addr) << 4) | 0x04)	/* burst read */
 52
 53struct rs5c348_plat_data {
 54	struct rtc_device *rtc;
 55	int rtc_24h;
 56};
 57
 58static int
 59rs5c348_rtc_set_time(struct device *dev, struct rtc_time *tm)
 60{
 61	struct spi_device *spi = to_spi_device(dev);
 62	struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
 63	u8 txbuf[5+7], *txp;
 64	int ret;
 65
 66	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
 67	if (ret < 0)
 68		return ret;
 69	if (ret & RS5C348_BIT_XSTP) {
 70		txbuf[0] = RS5C348_CMD_W(RS5C348_REG_CTL2);
 71		txbuf[1] = 0;
 72		ret = spi_write_then_read(spi, txbuf, 2, NULL, 0);
 73		if (ret < 0)
 74			return ret;
 75	}
 76
 77	/* Transfer 5 bytes before writing SEC.  This gives 31us for carry. */
 78	txp = txbuf;
 79	txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
 80	txbuf[1] = 0;	/* dummy */
 81	txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
 82	txbuf[3] = 0;	/* dummy */
 83	txbuf[4] = RS5C348_CMD_MW(RS5C348_REG_SECS); /* cmd, sec, ... */
 84	txp = &txbuf[5];
 85	txp[RS5C348_REG_SECS] = bin2bcd(tm->tm_sec);
 86	txp[RS5C348_REG_MINS] = bin2bcd(tm->tm_min);
 87	if (pdata->rtc_24h) {
 88		txp[RS5C348_REG_HOURS] = bin2bcd(tm->tm_hour);
 89	} else {
 90		/* hour 0 is AM12, noon is PM12 */
 91		txp[RS5C348_REG_HOURS] = bin2bcd((tm->tm_hour + 11) % 12 + 1) |
 92			(tm->tm_hour >= 12 ? RS5C348_BIT_PM : 0);
 93	}
 94	txp[RS5C348_REG_WDAY] = bin2bcd(tm->tm_wday);
 95	txp[RS5C348_REG_DAY] = bin2bcd(tm->tm_mday);
 96	txp[RS5C348_REG_MONTH] = bin2bcd(tm->tm_mon + 1) |
 97		(tm->tm_year >= 100 ? RS5C348_BIT_Y2K : 0);
 98	txp[RS5C348_REG_YEAR] = bin2bcd(tm->tm_year % 100);
 99	/* write in one transfer to avoid data inconsistency */
100	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf), NULL, 0);
101	udelay(62);	/* Tcsr 62us */
102	return ret;
103}
104
105static int
106rs5c348_rtc_read_time(struct device *dev, struct rtc_time *tm)
107{
108	struct spi_device *spi = to_spi_device(dev);
109	struct rs5c348_plat_data *pdata = dev_get_platdata(&spi->dev);
110	u8 txbuf[5], rxbuf[7];
111	int ret;
112
113	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL2));
114	if (ret < 0)
115		return ret;
116	if (ret & RS5C348_BIT_VDET)
117		dev_warn(&spi->dev, "voltage-low detected.\n");
118	if (ret & RS5C348_BIT_XSTP) {
119		dev_warn(&spi->dev, "oscillator-stop detected.\n");
120		return -EINVAL;
121	}
122
123	/* Transfer 5 byte befores reading SEC.  This gives 31us for carry. */
124	txbuf[0] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
125	txbuf[1] = 0;	/* dummy */
126	txbuf[2] = RS5C348_CMD_R(RS5C348_REG_CTL2); /* cmd, ctl2 */
127	txbuf[3] = 0;	/* dummy */
128	txbuf[4] = RS5C348_CMD_MR(RS5C348_REG_SECS); /* cmd, sec, ... */
129
130	/* read in one transfer to avoid data inconsistency */
131	ret = spi_write_then_read(spi, txbuf, sizeof(txbuf),
132				  rxbuf, sizeof(rxbuf));
133	udelay(62);	/* Tcsr 62us */
134	if (ret < 0)
135		return ret;
136
137	tm->tm_sec = bcd2bin(rxbuf[RS5C348_REG_SECS] & RS5C348_SECS_MASK);
138	tm->tm_min = bcd2bin(rxbuf[RS5C348_REG_MINS] & RS5C348_MINS_MASK);
139	tm->tm_hour = bcd2bin(rxbuf[RS5C348_REG_HOURS] & RS5C348_HOURS_MASK);
140	if (!pdata->rtc_24h) {
141		if (rxbuf[RS5C348_REG_HOURS] & RS5C348_BIT_PM) {
142			tm->tm_hour -= 20;
143			tm->tm_hour %= 12;
144			tm->tm_hour += 12;
145		} else
146			tm->tm_hour %= 12;
147	}
148	tm->tm_wday = bcd2bin(rxbuf[RS5C348_REG_WDAY] & RS5C348_WDAY_MASK);
149	tm->tm_mday = bcd2bin(rxbuf[RS5C348_REG_DAY] & RS5C348_DAY_MASK);
150	tm->tm_mon =
151		bcd2bin(rxbuf[RS5C348_REG_MONTH] & RS5C348_MONTH_MASK) - 1;
152	/* year is 1900 + tm->tm_year */
153	tm->tm_year = bcd2bin(rxbuf[RS5C348_REG_YEAR]) +
154		((rxbuf[RS5C348_REG_MONTH] & RS5C348_BIT_Y2K) ? 100 : 0);
155
 
 
 
 
 
156	return 0;
157}
158
159static const struct rtc_class_ops rs5c348_rtc_ops = {
160	.read_time	= rs5c348_rtc_read_time,
161	.set_time	= rs5c348_rtc_set_time,
162};
163
164static int rs5c348_probe(struct spi_device *spi)
 
 
165{
166	int ret;
167	struct rtc_device *rtc;
168	struct rs5c348_plat_data *pdata;
169
170	pdata = devm_kzalloc(&spi->dev, sizeof(struct rs5c348_plat_data),
171				GFP_KERNEL);
172	if (!pdata)
173		return -ENOMEM;
174	spi->dev.platform_data = pdata;
175
176	/* Check D7 of SECOND register */
177	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_SECS));
178	if (ret < 0 || (ret & 0x80)) {
179		dev_err(&spi->dev, "not found.\n");
180		return ret;
181	}
182
 
183	dev_info(&spi->dev, "spiclk %u KHz.\n",
184		 (spi->max_speed_hz + 500) / 1000);
185
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
186	ret = spi_w8r8(spi, RS5C348_CMD_R(RS5C348_REG_CTL1));
187	if (ret < 0)
188		return ret;
189	if (ret & RS5C348_BIT_24H)
190		pdata->rtc_24h = 1;
191
192	rtc = devm_rtc_allocate_device(&spi->dev);
193	if (IS_ERR(rtc))
194		return PTR_ERR(rtc);
 
 
 
 
195
196	pdata->rtc = rtc;
197
198	rtc->ops = &rs5c348_rtc_ops;
 
 
 
 
199
200	return devm_rtc_register_device(rtc);
 
 
 
 
 
 
 
 
201}
202
203static struct spi_driver rs5c348_driver = {
204	.driver = {
205		.name	= "rtc-rs5c348",
 
 
206	},
207	.probe	= rs5c348_probe,
 
208};
209
210module_spi_driver(rs5c348_driver);
 
 
 
 
 
 
 
 
 
 
 
211
212MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
213MODULE_DESCRIPTION("Ricoh RS5C348 RTC driver");
214MODULE_LICENSE("GPL");
 
215MODULE_ALIAS("spi:rtc-rs5c348");