Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2023 Analog Devices, Inc.
4 * ADI Regulator driver for the MAX77857
5 * MAX77859 and MAX77831.
6 */
7#include <linux/bitfield.h>
8#include <linux/i2c.h>
9#include <linux/interrupt.h>
10#include <linux/module.h>
11#include <linux/regmap.h>
12#include <linux/regulator/driver.h>
13#include <linux/regulator/machine.h>
14#include <linux/regulator/of_regulator.h>
15#include <linux/util_macros.h>
16
17#define MAX77857_REG_INT_SRC 0x10
18#define MAX77857_REG_INT_MASK 0x11
19#define MAX77857_REG_CONT1 0x12
20#define MAX77857_REG_CONT2 0x13
21#define MAX77857_REG_CONT3 0x14
22
23#define MAX77857_INT_SRC_OCP BIT(0)
24#define MAX77857_INT_SRC_THS BIT(1)
25#define MAX77857_INT_SRC_HARDSHORT BIT(2)
26#define MAX77857_INT_SRC_OVP BIT(3)
27#define MAX77857_INT_SRC_POK BIT(4)
28
29#define MAX77857_ILIM_MASK GENMASK(2, 0)
30#define MAX77857_CONT1_FREQ GENMASK(4, 3)
31#define MAX77857_CONT3_FPWM BIT(5)
32
33#define MAX77859_REG_INT_SRC 0x11
34#define MAX77859_REG_CONT1 0x13
35#define MAX77859_REG_CONT2 0x14
36#define MAX77859_REG_CONT3 0x15
37#define MAX77859_REG_CONT5 0x17
38#define MAX77859_CONT2_FPWM BIT(2)
39#define MAX77859_CONT2_INTB BIT(3)
40#define MAX77859_CONT3_DVS_START BIT(2)
41#define MAX77859_VOLTAGE_SEL_MASK GENMASK(9, 0)
42
43#define MAX77859_CURRENT_MIN 1000000
44#define MAX77859_CURRENT_MAX 5000000
45#define MAX77859_CURRENT_STEP 50000
46
47enum max77857_id {
48 ID_MAX77831 = 1,
49 ID_MAX77857,
50 ID_MAX77859,
51 ID_MAX77859A,
52};
53
54static bool max77857_volatile_reg(struct device *dev, unsigned int reg)
55{
56 enum max77857_id id = (uintptr_t)dev_get_drvdata(dev);
57
58 switch (id) {
59 case ID_MAX77831:
60 case ID_MAX77857:
61 return reg == MAX77857_REG_INT_SRC;
62 case ID_MAX77859:
63 case ID_MAX77859A:
64 return reg == MAX77859_REG_INT_SRC;
65 default:
66 return true;
67 }
68}
69
70static const struct regmap_config max77857_regmap_config = {
71 .reg_bits = 8,
72 .val_bits = 8,
73 .cache_type = REGCACHE_MAPLE,
74 .volatile_reg = max77857_volatile_reg,
75};
76
77static int max77857_get_status(struct regulator_dev *rdev)
78{
79 unsigned int val;
80 int ret;
81
82 ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
83 if (ret)
84 return ret;
85
86 if (FIELD_GET(MAX77857_INT_SRC_POK, val))
87 return REGULATOR_STATUS_ON;
88
89 return REGULATOR_STATUS_ERROR;
90}
91
92static unsigned int max77857_get_mode(struct regulator_dev *rdev)
93{
94 enum max77857_id id = (uintptr_t)rdev_get_drvdata(rdev);
95 unsigned int regval;
96 int ret;
97
98 switch (id) {
99 case ID_MAX77831:
100 case ID_MAX77857:
101 ret = regmap_read(rdev->regmap, MAX77857_REG_CONT3, ®val);
102 if (ret)
103 return ret;
104
105 if (FIELD_GET(MAX77857_CONT3_FPWM, regval))
106 return REGULATOR_MODE_FAST;
107
108 break;
109 case ID_MAX77859:
110 case ID_MAX77859A:
111 ret = regmap_read(rdev->regmap, MAX77859_REG_CONT2, ®val);
112 if (ret)
113 return ret;
114
115 if (FIELD_GET(MAX77859_CONT2_FPWM, regval))
116 return REGULATOR_MODE_FAST;
117
118 break;
119 default:
120 return -EINVAL;
121 }
122
123 return REGULATOR_MODE_NORMAL;
124}
125
126static int max77857_set_mode(struct regulator_dev *rdev, unsigned int mode)
127{
128 enum max77857_id id = (uintptr_t)rdev_get_drvdata(rdev);
129 unsigned int reg, val;
130
131 switch (id) {
132 case ID_MAX77831:
133 case ID_MAX77857:
134 reg = MAX77857_REG_CONT3;
135 val = MAX77857_CONT3_FPWM;
136 break;
137 case ID_MAX77859:
138 case ID_MAX77859A:
139 reg = MAX77859_REG_CONT2;
140 val = MAX77859_CONT2_FPWM;
141 break;
142 default:
143 return -EINVAL;
144 }
145
146 switch (mode) {
147 case REGULATOR_MODE_FAST:
148 return regmap_set_bits(rdev->regmap, reg, val);
149 case REGULATOR_MODE_NORMAL:
150 return regmap_clear_bits(rdev->regmap, reg, val);
151 default:
152 return -EINVAL;
153 }
154}
155
156static int max77857_get_error_flags(struct regulator_dev *rdev,
157 unsigned int *flags)
158{
159 unsigned int val;
160 int ret;
161
162 ret = regmap_read(rdev->regmap, MAX77857_REG_INT_SRC, &val);
163 if (ret)
164 return ret;
165
166 *flags = 0;
167
168 if (FIELD_GET(MAX77857_INT_SRC_OVP, val))
169 *flags |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
170
171 if (FIELD_GET(MAX77857_INT_SRC_OCP, val) ||
172 FIELD_GET(MAX77857_INT_SRC_HARDSHORT, val))
173 *flags |= REGULATOR_ERROR_OVER_CURRENT;
174
175 if (FIELD_GET(MAX77857_INT_SRC_THS, val))
176 *flags |= REGULATOR_ERROR_OVER_TEMP;
177
178 if (!FIELD_GET(MAX77857_INT_SRC_POK, val))
179 *flags |= REGULATOR_ERROR_FAIL;
180
181 return 0;
182}
183
184static struct linear_range max77859_lin_ranges[] = {
185 REGULATOR_LINEAR_RANGE(3200000, 0x0A0, 0x320, 20000)
186};
187
188static const unsigned int max77859_ramp_table[4] = {
189 1000, 500, 250, 125
190};
191
192static int max77859_set_voltage_sel(struct regulator_dev *rdev,
193 unsigned int sel)
194{
195 __be16 reg;
196 int ret;
197
198 reg = cpu_to_be16(sel);
199
200 ret = regmap_bulk_write(rdev->regmap, MAX77859_REG_CONT3, ®, 2);
201 if (ret)
202 return ret;
203
204 /* actually apply new voltage */
205 return regmap_set_bits(rdev->regmap, MAX77859_REG_CONT3,
206 MAX77859_CONT3_DVS_START);
207}
208
209static int max77859_get_voltage_sel(struct regulator_dev *rdev)
210{
211 __be16 reg;
212 int ret;
213
214 ret = regmap_bulk_read(rdev->regmap, MAX77859_REG_CONT3, ®, 2);
215 if (ret)
216 return ret;
217
218 return FIELD_GET(MAX77859_VOLTAGE_SEL_MASK, __be16_to_cpu(reg));
219}
220
221static int max77859_set_current_limit(struct regulator_dev *rdev, int min_uA, int max_uA)
222{
223 u32 selector;
224
225 if (max_uA < MAX77859_CURRENT_MIN)
226 return -EINVAL;
227
228 selector = 0x12 + (max_uA - MAX77859_CURRENT_MIN) / MAX77859_CURRENT_STEP;
229
230 selector = clamp_val(selector, 0x00, 0x7F);
231
232 return regmap_write(rdev->regmap, MAX77859_REG_CONT5, selector);
233}
234
235static int max77859_get_current_limit(struct regulator_dev *rdev)
236{
237 u32 selector;
238 int ret;
239
240 ret = regmap_read(rdev->regmap, MAX77859_REG_CONT5, &selector);
241 if (ret)
242 return ret;
243
244 if (selector <= 0x12)
245 return MAX77859_CURRENT_MIN;
246
247 if (selector >= 0x64)
248 return MAX77859_CURRENT_MAX;
249
250 return MAX77859_CURRENT_MIN + (selector - 0x12) * MAX77859_CURRENT_STEP;
251}
252
253static const struct regulator_ops max77859_regulator_ops = {
254 .list_voltage = regulator_list_voltage_linear_range,
255 .set_voltage_sel = max77859_set_voltage_sel,
256 .get_voltage_sel = max77859_get_voltage_sel,
257 .set_ramp_delay = regulator_set_ramp_delay_regmap,
258 .get_status = max77857_get_status,
259 .set_mode = max77857_set_mode,
260 .get_mode = max77857_get_mode,
261 .get_error_flags = max77857_get_error_flags,
262};
263
264static const struct regulator_ops max77859a_regulator_ops = {
265 .list_voltage = regulator_list_voltage_linear_range,
266 .set_voltage_sel = max77859_set_voltage_sel,
267 .get_voltage_sel = max77859_get_voltage_sel,
268 .set_current_limit = max77859_set_current_limit,
269 .get_current_limit = max77859_get_current_limit,
270 .set_ramp_delay = regulator_set_ramp_delay_regmap,
271 .get_status = max77857_get_status,
272 .set_mode = max77857_set_mode,
273 .get_mode = max77857_get_mode,
274 .get_error_flags = max77857_get_error_flags,
275};
276
277static const struct regulator_ops max77857_regulator_ops = {
278 .list_voltage = regulator_list_voltage_linear_range,
279 .set_voltage_sel = regulator_set_voltage_sel_regmap,
280 .get_voltage_sel = regulator_get_voltage_sel_regmap,
281 .set_ramp_delay = regulator_set_ramp_delay_regmap,
282 .get_status = max77857_get_status,
283 .set_mode = max77857_set_mode,
284 .get_mode = max77857_get_mode,
285 .get_error_flags = max77857_get_error_flags,
286};
287
288static struct linear_range max77857_lin_ranges[] = {
289 REGULATOR_LINEAR_RANGE(4485000, 0x3D, 0xCC, 73500)
290};
291
292static const unsigned int max77857_switch_freq[] = {
293 1200000, 1500000, 1800000, 2100000
294};
295
296#define RAMAP_DELAY_INIT_VAL 1333
297
298static const unsigned int max77857_ramp_table[2][4] = {
299 { RAMAP_DELAY_INIT_VAL, 667, 333, 227 }, /* when switch freq is 1.8MHz or 2.1MHz */
300 { 1166, 667, 333, 167 }, /* when switch freq is 1.2MHz or 1.5MHz */
301};
302
303static struct regulator_desc max77857_regulator_desc = {
304 .ops = &max77857_regulator_ops,
305 .name = "max77857",
306 .linear_ranges = max77857_lin_ranges,
307 .n_linear_ranges = ARRAY_SIZE(max77857_lin_ranges),
308 .vsel_mask = 0xFF,
309 .vsel_reg = MAX77857_REG_CONT2,
310 .ramp_delay_table = max77857_ramp_table[0],
311 .n_ramp_values = ARRAY_SIZE(max77857_ramp_table[0]),
312 .ramp_reg = MAX77857_REG_CONT3,
313 .ramp_mask = GENMASK(1, 0),
314 .ramp_delay = RAMAP_DELAY_INIT_VAL,
315 .owner = THIS_MODULE,
316};
317
318static void max77857_calc_range(struct device *dev, enum max77857_id id)
319{
320 struct linear_range *range;
321 unsigned long vref_step;
322 u32 rtop = 0;
323 u32 rbot = 0;
324
325 device_property_read_u32(dev, "adi,rtop-ohms", &rtop);
326 device_property_read_u32(dev, "adi,rbot-ohms", &rbot);
327
328 if (!rbot || !rtop)
329 return;
330
331 switch (id) {
332 case ID_MAX77831:
333 case ID_MAX77857:
334 range = max77857_lin_ranges;
335 vref_step = 4900UL;
336 break;
337 case ID_MAX77859:
338 case ID_MAX77859A:
339 range = max77859_lin_ranges;
340 vref_step = 1250UL;
341 break;
342 }
343
344 range->step = DIV_ROUND_CLOSEST(vref_step * (rbot + rtop), rbot);
345 range->min = range->step * range->min_sel;
346}
347
348static int max77857_probe(struct i2c_client *client)
349{
350 const struct i2c_device_id *i2c_id;
351 struct device *dev = &client->dev;
352 struct regulator_config cfg = { };
353 struct regulator_dev *rdev;
354 struct regmap *regmap;
355 enum max77857_id id;
356 u32 switch_freq = 0;
357 int ret;
358
359 i2c_id = i2c_client_get_device_id(client);
360 if (!i2c_id)
361 return -EINVAL;
362
363 id = i2c_id->driver_data;
364
365 dev_set_drvdata(dev, (void *)id);
366
367 if (id == ID_MAX77859 || id == ID_MAX77859A) {
368 max77857_regulator_desc.ops = &max77859_regulator_ops;
369 max77857_regulator_desc.linear_ranges = max77859_lin_ranges;
370 max77857_regulator_desc.ramp_delay_table = max77859_ramp_table;
371 max77857_regulator_desc.ramp_delay = max77859_ramp_table[0];
372 }
373
374 if (id == ID_MAX77859A)
375 max77857_regulator_desc.ops = &max77859a_regulator_ops;
376
377 max77857_calc_range(dev, id);
378
379 regmap = devm_regmap_init_i2c(client, &max77857_regmap_config);
380 if (IS_ERR(regmap))
381 return dev_err_probe(dev, PTR_ERR(regmap),
382 "cannot initialize regmap\n");
383
384 device_property_read_u32(dev, "adi,switch-frequency-hz", &switch_freq);
385 if (switch_freq) {
386 switch_freq = find_closest(switch_freq, max77857_switch_freq,
387 ARRAY_SIZE(max77857_switch_freq));
388
389 if (id == ID_MAX77831 && switch_freq == 3)
390 switch_freq = 2;
391
392 switch (id) {
393 case ID_MAX77831:
394 case ID_MAX77857:
395 ret = regmap_update_bits(regmap, MAX77857_REG_CONT1,
396 MAX77857_CONT1_FREQ, switch_freq);
397
398 if (switch_freq >= 2)
399 break;
400
401 max77857_regulator_desc.ramp_delay_table = max77857_ramp_table[1];
402 max77857_regulator_desc.ramp_delay = max77857_ramp_table[1][0];
403 break;
404 case ID_MAX77859:
405 case ID_MAX77859A:
406 ret = regmap_update_bits(regmap, MAX77859_REG_CONT1,
407 MAX77857_CONT1_FREQ, switch_freq);
408 break;
409 }
410 if (ret)
411 return ret;
412 }
413
414 cfg.dev = dev;
415 cfg.driver_data = (void *)id;
416 cfg.regmap = regmap;
417 cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
418 &max77857_regulator_desc);
419 if (!cfg.init_data)
420 return -ENOMEM;
421
422 rdev = devm_regulator_register(dev, &max77857_regulator_desc, &cfg);
423 if (IS_ERR(rdev))
424 return dev_err_probe(dev, PTR_ERR(rdev),
425 "cannot register regulator\n");
426
427 return 0;
428}
429
430static const struct i2c_device_id max77857_id[] = {
431 { "max77831", ID_MAX77831 },
432 { "max77857", ID_MAX77857 },
433 { "max77859", ID_MAX77859 },
434 { "max77859a", ID_MAX77859A },
435 { }
436};
437MODULE_DEVICE_TABLE(i2c, max77857_id);
438
439static const struct of_device_id max77857_of_id[] = {
440 { .compatible = "adi,max77831", .data = (void *)ID_MAX77831 },
441 { .compatible = "adi,max77857", .data = (void *)ID_MAX77857 },
442 { .compatible = "adi,max77859", .data = (void *)ID_MAX77859 },
443 { .compatible = "adi,max77859a", .data = (void *)ID_MAX77859A },
444 { }
445};
446MODULE_DEVICE_TABLE(of, max77857_of_id);
447
448static struct i2c_driver max77857_driver = {
449 .driver = {
450 .name = "max77857",
451 .of_match_table = max77857_of_id,
452 },
453 .id_table = max77857_id,
454 .probe = max77857_probe,
455};
456module_i2c_driver(max77857_driver);
457
458MODULE_DESCRIPTION("Analog Devices MAX77857 Buck-Boost Converter Driver");
459MODULE_AUTHOR("Ibrahim Tilki <Ibrahim.Tilki@analog.com>");
460MODULE_AUTHOR("Okan Sahin <Okan.Sahin@analog.com>");
461MODULE_LICENSE("GPL");