Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: GPL-2.0+
  2//
  3// max77693.c - Regulator driver for the Maxim 77693 and 77843
  4//
  5// Copyright (C) 2013-2015 Samsung Electronics
  6// Jonghwa Lee <jonghwa3.lee@samsung.com>
  7// Krzysztof Kozlowski <krzk@kernel.org>
  8//
  9// This driver is based on max77686.c
 10
 11#include <linux/err.h>
 12#include <linux/slab.h>
 13#include <linux/platform_device.h>
 14#include <linux/module.h>
 15#include <linux/export.h>
 16#include <linux/regulator/driver.h>
 17#include <linux/regulator/machine.h>
 18#include <linux/mfd/max77693.h>
 19#include <linux/mfd/max77693-common.h>
 20#include <linux/mfd/max77693-private.h>
 21#include <linux/mfd/max77843-private.h>
 22#include <linux/regulator/of_regulator.h>
 23#include <linux/regmap.h>
 24
 25/*
 26 * ID for MAX77843 regulators.
 27 * There is no need for such for MAX77693.
 28 */
 29enum max77843_regulator_type {
 30	MAX77843_SAFEOUT1 = 0,
 31	MAX77843_SAFEOUT2,
 32	MAX77843_CHARGER,
 33
 34	MAX77843_NUM,
 35};
 36
 37/* Register differences between chargers: MAX77693 and MAX77843 */
 38struct chg_reg_data {
 39	unsigned int linear_reg;
 40	unsigned int linear_mask;
 41	unsigned int uA_step;
 42	unsigned int min_sel;
 43};
 44
 45/*
 46 * MAX77693 CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
 47 * 0x00, 0x01, 0x2, 0x03	= 60 mA
 48 * 0x04 ~ 0x7E			= (60 + (X - 3) * 20) mA
 49 * Actually for MAX77693 the driver manipulates the maximum input current,
 50 * not the fast charge current (output). This should be fixed.
 51 *
 52 * On MAX77843 the calculation formula is the same (except values).
 53 * Fortunately it properly manipulates the fast charge current.
 54 */
 55static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 56{
 57	const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
 58	unsigned int chg_min_uA = rdev->constraints->min_uA;
 59	unsigned int chg_max_uA = rdev->constraints->max_uA;
 60	unsigned int reg, sel;
 61	unsigned int val;
 62	int ret;
 63
 64	ret = regmap_read(rdev->regmap, reg_data->linear_reg, &reg);
 65	if (ret < 0)
 66		return ret;
 67
 68	sel = reg & reg_data->linear_mask;
 69
 70	/* the first four codes for charger current are all 60mA */
 71	if (sel <= reg_data->min_sel)
 72		sel = 0;
 73	else
 74		sel -= reg_data->min_sel;
 75
 76	val = chg_min_uA + reg_data->uA_step * sel;
 77	if (val > chg_max_uA)
 78		return -EINVAL;
 79
 80	return val;
 81}
 82
 83static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
 84						int min_uA, int max_uA)
 85{
 86	const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
 87	unsigned int chg_min_uA = rdev->constraints->min_uA;
 88	int sel = 0;
 89
 90	while (chg_min_uA + reg_data->uA_step * sel < min_uA)
 91		sel++;
 92
 93	if (chg_min_uA + reg_data->uA_step * sel > max_uA)
 94		return -EINVAL;
 95
 96	/* the first four codes for charger current are all 60mA */
 97	sel += reg_data->min_sel;
 98
 99	return regmap_write(rdev->regmap, reg_data->linear_reg, sel);
100}
101/* end of CHARGER regulator ops */
102
103/* Returns regmap suitable for given regulator on chosen device */
104static struct regmap *max77693_get_regmap(enum max77693_types type,
105					  struct max77693_dev *max77693,
106					  int reg_id)
107{
108	if (type == TYPE_MAX77693)
109		return max77693->regmap;
110
111	/* Else: TYPE_MAX77843 */
112	switch (reg_id) {
113	case MAX77843_SAFEOUT1:
114	case MAX77843_SAFEOUT2:
115		return max77693->regmap;
116	case MAX77843_CHARGER:
117		return max77693->regmap_chg;
118	default:
119		return max77693->regmap;
120	}
121}
122
123static const unsigned int max77693_safeout_table[] = {
124	4850000,
125	4900000,
126	4950000,
127	3300000,
128};
129
130static const struct regulator_ops max77693_safeout_ops = {
131	.list_voltage		= regulator_list_voltage_table,
132	.is_enabled		= regulator_is_enabled_regmap,
133	.enable			= regulator_enable_regmap,
134	.disable		= regulator_disable_regmap,
135	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
136	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
137};
138
139static const struct regulator_ops max77693_charger_ops = {
140	.is_enabled		= regulator_is_enabled_regmap,
141	.enable			= regulator_enable_regmap,
142	.disable		= regulator_disable_regmap,
143	.get_current_limit	= max77693_chg_get_current_limit,
144	.set_current_limit	= max77693_chg_set_current_limit,
145};
146
147#define max77693_regulator_desc_esafeout(_num)	{		\
148	.name		= "ESAFEOUT"#_num,			\
149	.id		= MAX77693_ESAFEOUT##_num,		\
150	.of_match	= of_match_ptr("ESAFEOUT"#_num),	\
151	.regulators_node	= of_match_ptr("regulators"),	\
152	.n_voltages	= 4,					\
153	.ops		= &max77693_safeout_ops,		\
154	.type		= REGULATOR_VOLTAGE,			\
155	.owner		= THIS_MODULE,				\
156	.volt_table	= max77693_safeout_table,		\
157	.vsel_reg	= MAX77693_CHG_REG_SAFEOUT_CTRL,	\
158	.vsel_mask	= SAFEOUT_CTRL_SAFEOUT##_num##_MASK,	\
159	.enable_reg	= MAX77693_CHG_REG_SAFEOUT_CTRL,	\
160	.enable_mask	= SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK ,	\
161}
162
163static const struct regulator_desc max77693_supported_regulators[] = {
164	max77693_regulator_desc_esafeout(1),
165	max77693_regulator_desc_esafeout(2),
166	{
167		.name = "CHARGER",
168		.id = MAX77693_CHARGER,
169		.of_match = of_match_ptr("CHARGER"),
170		.regulators_node = of_match_ptr("regulators"),
171		.ops = &max77693_charger_ops,
172		.type = REGULATOR_CURRENT,
173		.owner = THIS_MODULE,
174		.enable_reg = MAX77693_CHG_REG_CHG_CNFG_00,
175		.enable_mask = CHG_CNFG_00_CHG_MASK |
176				CHG_CNFG_00_BUCK_MASK,
177		.enable_val = CHG_CNFG_00_CHG_MASK | CHG_CNFG_00_BUCK_MASK,
178	},
179};
180
181static const struct chg_reg_data max77693_chg_reg_data = {
182	.linear_reg	= MAX77693_CHG_REG_CHG_CNFG_09,
183	.linear_mask	= CHG_CNFG_09_CHGIN_ILIM_MASK,
184	.uA_step	= 20000,
185	.min_sel	= 3,
186};
187
188#define	max77843_regulator_desc_esafeout(num)	{			\
189	.name		= "SAFEOUT" # num,				\
190	.id		= MAX77843_SAFEOUT ## num,			\
191	.ops		= &max77693_safeout_ops,			\
192	.of_match	= of_match_ptr("SAFEOUT" # num),		\
193	.regulators_node = of_match_ptr("regulators"),			\
194	.type		= REGULATOR_VOLTAGE,				\
195	.owner		= THIS_MODULE,					\
196	.n_voltages	= ARRAY_SIZE(max77693_safeout_table),		\
197	.volt_table	= max77693_safeout_table,			\
198	.enable_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,			\
199	.enable_mask	= MAX77843_REG_SAFEOUTCTRL_ENSAFEOUT ## num,	\
200	.vsel_reg	= MAX77843_SYS_REG_SAFEOUTCTRL,			\
201	.vsel_mask	= MAX77843_REG_SAFEOUTCTRL_SAFEOUT ## num ## _MASK, \
202}
203
204static const struct regulator_desc max77843_supported_regulators[] = {
205	[MAX77843_SAFEOUT1] = max77843_regulator_desc_esafeout(1),
206	[MAX77843_SAFEOUT2] = max77843_regulator_desc_esafeout(2),
207	[MAX77843_CHARGER] = {
208		.name		= "CHARGER",
209		.id		= MAX77843_CHARGER,
210		.ops		= &max77693_charger_ops,
211		.of_match	= of_match_ptr("CHARGER"),
212		.regulators_node = of_match_ptr("regulators"),
213		.type		= REGULATOR_CURRENT,
214		.owner		= THIS_MODULE,
215		.enable_reg	= MAX77843_CHG_REG_CHG_CNFG_00,
216		.enable_mask	= MAX77843_CHG_MASK,
217		.enable_val	= MAX77843_CHG_MASK,
218	},
219};
220
221static const struct chg_reg_data max77843_chg_reg_data = {
222	.linear_reg	= MAX77843_CHG_REG_CHG_CNFG_02,
223	.linear_mask	= MAX77843_CHG_FAST_CHG_CURRENT_MASK,
224	.uA_step	= MAX77843_CHG_FAST_CHG_CURRENT_STEP,
225	.min_sel	= 2,
226};
227
228static int max77693_pmic_probe(struct platform_device *pdev)
229{
230	enum max77693_types type = platform_get_device_id(pdev)->driver_data;
231	struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
232	const struct regulator_desc *regulators;
233	unsigned int regulators_size;
234	int i;
235	struct regulator_config config = { };
236
237	config.dev = iodev->dev;
238
239	switch (type) {
240	case TYPE_MAX77693:
241		regulators = max77693_supported_regulators;
242		regulators_size = ARRAY_SIZE(max77693_supported_regulators);
243		config.driver_data = (void *)&max77693_chg_reg_data;
244		break;
245	case TYPE_MAX77843:
246		regulators = max77843_supported_regulators;
247		regulators_size = ARRAY_SIZE(max77843_supported_regulators);
248		config.driver_data = (void *)&max77843_chg_reg_data;
249		break;
250	default:
251		dev_err(&pdev->dev, "Unsupported device type: %u\n", type);
252		return -ENODEV;
253	}
254
255	for (i = 0; i < regulators_size; i++) {
256		struct regulator_dev *rdev;
257
258		config.regmap = max77693_get_regmap(type, iodev,
259						    regulators[i].id);
260
261		rdev = devm_regulator_register(&pdev->dev,
262						&regulators[i], &config);
263		if (IS_ERR(rdev)) {
264			dev_err(&pdev->dev,
265				"Failed to initialize regulator-%d\n", i);
266			return PTR_ERR(rdev);
267		}
268	}
269
270	return 0;
271}
272
273static const struct platform_device_id max77693_pmic_id[] = {
274	{ "max77693-pmic", TYPE_MAX77693 },
275	{ "max77843-regulator", TYPE_MAX77843 },
276	{},
277};
278
279MODULE_DEVICE_TABLE(platform, max77693_pmic_id);
280
281static struct platform_driver max77693_pmic_driver = {
282	.driver = {
283		   .name = "max77693-pmic",
284		   .probe_type = PROBE_PREFER_ASYNCHRONOUS,
285		   },
286	.probe = max77693_pmic_probe,
287	.id_table = max77693_pmic_id,
288};
289
290static int __init max77693_pmic_init(void)
291{
292	return platform_driver_register(&max77693_pmic_driver);
293}
294subsys_initcall(max77693_pmic_init);
295
296static void __exit max77693_pmic_cleanup(void)
297{
298	platform_driver_unregister(&max77693_pmic_driver);
299}
300module_exit(max77693_pmic_cleanup);
301
302MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver");
303MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
304MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
305MODULE_LICENSE("GPL");