Linux Audio

Check our new training course

Yocto / OpenEmbedded training

Mar 24-27, 2025, special US time zones
Register
Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Samsung SoC USB 1.1/2.0 PHY driver
  4 *
  5 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
  6 * Author: Kamil Debski <k.debski@samsung.com>
  7 */
  8
  9#include <linux/clk.h>
 10#include <linux/mfd/syscon.h>
 11#include <linux/module.h>
 12#include <linux/of.h>
 13#include <linux/phy/phy.h>
 14#include <linux/platform_device.h>
 15#include <linux/spinlock.h>
 16#include "phy-samsung-usb2.h"
 17
 18static int samsung_usb2_phy_power_on(struct phy *phy)
 19{
 20	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
 21	struct samsung_usb2_phy_driver *drv = inst->drv;
 22	int ret;
 23
 24	dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
 25		inst->cfg->label);
 26
 27	if (drv->vbus) {
 28		ret = regulator_enable(drv->vbus);
 29		if (ret)
 30			goto err_regulator;
 31	}
 32
 33	ret = clk_prepare_enable(drv->clk);
 34	if (ret)
 35		goto err_main_clk;
 36	ret = clk_prepare_enable(drv->ref_clk);
 37	if (ret)
 38		goto err_instance_clk;
 39	if (inst->cfg->power_on) {
 40		spin_lock(&drv->lock);
 41		ret = inst->cfg->power_on(inst);
 42		spin_unlock(&drv->lock);
 43		if (ret)
 44			goto err_power_on;
 45	}
 46
 47	return 0;
 48
 49err_power_on:
 50	clk_disable_unprepare(drv->ref_clk);
 51err_instance_clk:
 52	clk_disable_unprepare(drv->clk);
 53err_main_clk:
 54	if (drv->vbus)
 55		regulator_disable(drv->vbus);
 56err_regulator:
 57	return ret;
 58}
 59
 60static int samsung_usb2_phy_power_off(struct phy *phy)
 61{
 62	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
 63	struct samsung_usb2_phy_driver *drv = inst->drv;
 64	int ret = 0;
 65
 66	dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
 67		inst->cfg->label);
 68	if (inst->cfg->power_off) {
 69		spin_lock(&drv->lock);
 70		ret = inst->cfg->power_off(inst);
 71		spin_unlock(&drv->lock);
 72		if (ret)
 73			return ret;
 74	}
 75	clk_disable_unprepare(drv->ref_clk);
 76	clk_disable_unprepare(drv->clk);
 77	if (drv->vbus)
 78		ret = regulator_disable(drv->vbus);
 79
 80	return ret;
 81}
 82
 83static const struct phy_ops samsung_usb2_phy_ops = {
 84	.power_on	= samsung_usb2_phy_power_on,
 85	.power_off	= samsung_usb2_phy_power_off,
 86	.owner		= THIS_MODULE,
 87};
 88
 89static struct phy *samsung_usb2_phy_xlate(struct device *dev,
 90					const struct of_phandle_args *args)
 91{
 92	struct samsung_usb2_phy_driver *drv;
 93
 94	drv = dev_get_drvdata(dev);
 95	if (!drv)
 96		return ERR_PTR(-EINVAL);
 97
 98	if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
 99		return ERR_PTR(-ENODEV);
100
101	return drv->instances[args->args[0]].phy;
102}
103
104static const struct of_device_id samsung_usb2_phy_of_match[] = {
105#ifdef CONFIG_PHY_EXYNOS4X12_USB2
106	{
107		.compatible = "samsung,exynos3250-usb2-phy",
108		.data = &exynos3250_usb2_phy_config,
109	},
110#endif
111#ifdef CONFIG_PHY_EXYNOS4210_USB2
112	{
113		.compatible = "samsung,exynos4210-usb2-phy",
114		.data = &exynos4210_usb2_phy_config,
115	},
116#endif
117#ifdef CONFIG_PHY_EXYNOS4X12_USB2
118	{
119		.compatible = "samsung,exynos4x12-usb2-phy",
120		.data = &exynos4x12_usb2_phy_config,
121	},
122#endif
123#ifdef CONFIG_PHY_EXYNOS5250_USB2
124	{
125		.compatible = "samsung,exynos5250-usb2-phy",
126		.data = &exynos5250_usb2_phy_config,
127	},
128	{
129		.compatible = "samsung,exynos5420-usb2-phy",
130		.data = &exynos5420_usb2_phy_config,
131	},
132#endif
133#ifdef CONFIG_PHY_S5PV210_USB2
134	{
135		.compatible = "samsung,s5pv210-usb2-phy",
136		.data = &s5pv210_usb2_phy_config,
137	},
138#endif
139	{ },
140};
141MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
142
143static int samsung_usb2_phy_probe(struct platform_device *pdev)
144{
145	const struct samsung_usb2_phy_config *cfg;
146	struct device *dev = &pdev->dev;
147	struct phy_provider *phy_provider;
148	struct samsung_usb2_phy_driver *drv;
149	int i, ret;
150
151	if (!pdev->dev.of_node) {
152		dev_err(dev, "This driver is required to be instantiated from device tree\n");
153		return -EINVAL;
154	}
155
156	cfg = of_device_get_match_data(dev);
157	if (!cfg)
158		return -EINVAL;
159
160	drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys),
161			   GFP_KERNEL);
162	if (!drv)
163		return -ENOMEM;
164
165	dev_set_drvdata(dev, drv);
166	spin_lock_init(&drv->lock);
167
168	drv->cfg = cfg;
169	drv->dev = dev;
170
171	drv->reg_phy = devm_platform_ioremap_resource(pdev, 0);
172	if (IS_ERR(drv->reg_phy)) {
173		dev_err(dev, "Failed to map register memory (phy)\n");
174		return PTR_ERR(drv->reg_phy);
175	}
176
177	drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
178		"samsung,pmureg-phandle");
179	if (IS_ERR(drv->reg_pmu)) {
180		dev_err(dev, "Failed to map PMU registers (via syscon)\n");
181		return PTR_ERR(drv->reg_pmu);
182	}
183
184	if (drv->cfg->has_mode_switch) {
185		drv->reg_sys = syscon_regmap_lookup_by_phandle(
186				pdev->dev.of_node, "samsung,sysreg-phandle");
187		if (IS_ERR(drv->reg_sys)) {
188			dev_err(dev, "Failed to map system registers (via syscon)\n");
189			return PTR_ERR(drv->reg_sys);
190		}
191	}
192
193	drv->clk = devm_clk_get(dev, "phy");
194	if (IS_ERR(drv->clk)) {
195		dev_err(dev, "Failed to get clock of phy controller\n");
196		return PTR_ERR(drv->clk);
197	}
198
199	drv->ref_clk = devm_clk_get(dev, "ref");
200	if (IS_ERR(drv->ref_clk)) {
201		dev_err(dev, "Failed to get reference clock for the phy controller\n");
202		return PTR_ERR(drv->ref_clk);
203	}
204
205	drv->ref_rate = clk_get_rate(drv->ref_clk);
206	if (drv->cfg->rate_to_clk) {
207		ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val);
208		if (ret)
209			return ret;
210	}
211
212	drv->vbus = devm_regulator_get(dev, "vbus");
213	if (IS_ERR(drv->vbus)) {
214		ret = PTR_ERR(drv->vbus);
215		if (ret == -EPROBE_DEFER)
216			return ret;
217		drv->vbus = NULL;
218	}
219
220	for (i = 0; i < drv->cfg->num_phys; i++) {
221		char *label = drv->cfg->phys[i].label;
222		struct samsung_usb2_phy_instance *p = &drv->instances[i];
223
224		dev_dbg(dev, "Creating phy \"%s\"\n", label);
225		p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops);
226		if (IS_ERR(p->phy)) {
227			dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n",
228				label);
229			return PTR_ERR(p->phy);
230		}
231
232		p->cfg = &drv->cfg->phys[i];
233		p->drv = drv;
234		phy_set_bus_width(p->phy, 8);
235		phy_set_drvdata(p->phy, p);
236	}
237
238	phy_provider = devm_of_phy_provider_register(dev,
239							samsung_usb2_phy_xlate);
240	if (IS_ERR(phy_provider)) {
241		dev_err(drv->dev, "Failed to register phy provider\n");
242		return PTR_ERR(phy_provider);
243	}
244
245	return 0;
246}
247
248static struct platform_driver samsung_usb2_phy_driver = {
249	.probe	= samsung_usb2_phy_probe,
250	.driver = {
251		.of_match_table	= samsung_usb2_phy_of_match,
252		.name		= "samsung-usb2-phy",
253		.suppress_bind_attrs = true,
254	}
255};
256
257module_platform_driver(samsung_usb2_phy_driver);
258MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver");
259MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
260MODULE_LICENSE("GPL v2");
261MODULE_ALIAS("platform:samsung-usb2-phy");