Loading...
Note: File does not exist in v3.1.
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# 8390 device configuration
4#
5
6config NET_VENDOR_8390
7 bool "National Semiconductor 8390 devices"
8 default y
9 depends on NET_VENDOR_NATSEMI
10 help
11 If you have a network (Ethernet) card belonging to this class, say Y.
12
13 Note that the answer to this question doesn't directly affect the
14 kernel: saying N will just cause the configurator to skip all
15 the questions about National Semiconductor 8390 cards. If you say Y,
16 you will be asked for your specific card in the following questions.
17
18if NET_VENDOR_8390
19
20config PCMCIA_AXNET
21 tristate "Asix AX88190 PCMCIA support"
22 depends on PCMCIA && HAS_IOPORT
23 help
24 Say Y here if you intend to attach an Asix AX88190-based PCMCIA
25 (PC-card) Fast Ethernet card to your computer. These cards are
26 nearly NE2000 compatible but need a separate driver due to a few
27 misfeatures.
28
29 To compile this driver as a module, choose M here: the module will be
30 called axnet_cs. If unsure, say N.
31
32config AX88796
33 tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
34 depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
35 select CRC32
36 select PHYLIB
37 select MDIO_BITBANG
38 help
39 AX88796 driver, using platform bus to provide
40 chip detection and resources
41
42config AX88796_93CX6
43 bool "ASIX AX88796 external 93CX6 eeprom support"
44 depends on AX88796
45 select EEPROM_93CX6
46 help
47 Select this if your platform comes with an external 93CX6 eeprom.
48
49config XSURF100
50 tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
51 depends on ZORRO
52 select AX88796
53 select AX88796B_PHY
54 help
55 This driver is for the Individual Computers X-Surf 100 Ethernet
56 card (based on the Asix AX88796 chip). If you have such a card,
57 say Y. Otherwise, say N.
58
59 To compile this driver as a module, choose M here: the module
60 will be called xsurf100.
61
62config HYDRA
63 tristate "Hydra support"
64 depends on ZORRO
65 select CRC32
66 help
67 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
68
69 To compile this driver as a module, choose M here: the module
70 will be called hydra.
71
72config ARM_ETHERH
73 tristate "I-cubed EtherH/ANT EtherM support"
74 depends on ARM && ARCH_ACORN
75 select CRC32
76 help
77 If you have an Acorn system with one of these network cards, you
78 should say Y to this option if you wish to use it with Linux.
79
80config MAC8390
81 tristate "Macintosh NS 8390 based ethernet cards"
82 depends on MAC
83 select CRC32
84 help
85 If you want to include a driver to support Nubus or LC-PDS
86 Ethernet cards using an NS8390 chipset or its equivalent, say Y.
87
88config MCF8390
89 tristate "ColdFire NS8390 based Ethernet support"
90 depends on COLDFIRE
91 select CRC32
92 help
93 This driver is for Ethernet devices using an NS8390-compatible
94 chipset on many common ColdFire CPU based boards. Many of the older
95 Freescale dev boards use this, and some other common boards like
96 some SnapGear routers do as well.
97
98 If you have one of these boards and want to use the network interface
99 on them then choose Y. To compile this driver as a module, choose M
100 here, the module will be called mcf8390.
101
102config NE2000
103 tristate "NE2000/NE1000 support"
104 depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
105 select NETDEV_LEGACY_INIT if ISA
106 select CRC32
107 help
108 If you have a network (Ethernet) card of this type, say Y here.
109 Many Ethernet cards without a specific driver are compatible with
110 the NE2000.
111
112 If you have a PCI NE2000 card however, say N here and Y to "PCI
113 NE2000 and clone support" below.
114
115 To compile this driver as a module, choose M here. The module
116 will be called ne.
117
118config NE2K_PCI
119 tristate "PCI NE2000 and clones support (see help)"
120 depends on PCI && HAS_IOPORT
121 select CRC32
122 help
123 This driver is for NE2000 compatible PCI cards. It will not work
124 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
125 support" below). If you have a PCI NE2000 network (Ethernet) card,
126 say Y here.
127
128 This driver also works for the following NE2000 clone cards:
129 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
130 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
131 Holtek HT80232 Holtek HT80229
132
133 To compile this driver as a module, choose M here. The module
134 will be called ne2k-pci.
135
136config APNE
137 tristate "PCMCIA NE2000 support"
138 depends on AMIGA_PCMCIA
139 select CRC32
140 help
141 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
142 say N.
143
144 To compile this driver as a module, choose M here: the module
145 will be called apne.
146
147config PCMCIA_PCNET
148 tristate "NE2000 compatible PCMCIA support"
149 depends on PCMCIA && HAS_IOPORT
150 select CRC32
151 help
152 Say Y here if you intend to attach an NE2000 compatible PCMCIA
153 (PC-card) Ethernet or Fast Ethernet card to your computer.
154
155 To compile this driver as a module, choose M here: the module will be
156 called pcnet_cs. If unsure, say N.
157
158config STNIC
159 tristate "National DP83902AV support"
160 depends on SUPERH
161 select CRC32
162 help
163 Support for cards based on the National Semiconductor DP83902AV
164 ST-NIC Serial Network Interface Controller for Twisted Pair. This
165 is a 10Mbit/sec Ethernet controller. Product overview and specs at
166 <http://www.national.com/pf/DP/DP83902A.html>.
167
168 If unsure, say N.
169
170config ULTRA
171 tristate "SMC Ultra support"
172 depends on ISA
173 select NETDEV_LEGACY_INIT
174 select CRC32
175 help
176 If you have a network (Ethernet) card of this type, say Y here.
177
178 Important: There have been many reports that, with some motherboards
179 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
180 such as some BusLogic models) causes corruption problems with many
181 operating systems. The Linux smc-ultra driver has a work-around for
182 this but keep it in mind if you have such a SCSI card and have
183 problems.
184
185 To compile this driver as a module, choose M here. The module
186 will be called smc-ultra.
187
188config WD80x3
189 tristate "WD80*3 support"
190 depends on ISA
191 select NETDEV_LEGACY_INIT
192 select CRC32
193 help
194 If you have a network (Ethernet) card of this type, say Y here.
195
196 To compile this driver as a module, choose M here. The module
197 will be called wd.
198
199config ZORRO8390
200 tristate "Zorro NS8390-based Ethernet support"
201 depends on ZORRO
202 select CRC32
203 help
204 This driver is for Zorro Ethernet cards using an NS8390-compatible
205 chipset, like the Village Tronic Ariadne II and the Individual
206 Computers X-Surf Ethernet cards. If you have such a card, say Y.
207 Otherwise, say N.
208
209 To compile this driver as a module, choose M here: the module
210 will be called zorro8390.
211
212endif # NET_VENDOR_8390