Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * driver for NXP USB Host devices
4 *
5 * Currently supported OHCI host devices:
6 * - NXP LPC32xx
7 *
8 * Authors: Dmitry Chigirev <source@mvista.com>
9 * Vitaly Wool <vitalywool@gmail.com>
10 *
11 * register initialization is based on code examples provided by Philips
12 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
13 *
14 * NOTE: This driver does not have suspend/resume functionality
15 * This driver is intended for engineering development purposes only
16 *
17 * 2005-2006 (c) MontaVista Software, Inc.
18 */
19#include <linux/clk.h>
20#include <linux/dma-mapping.h>
21#include <linux/io.h>
22#include <linux/i2c.h>
23#include <linux/module.h>
24#include <linux/of.h>
25#include <linux/platform_device.h>
26#include <linux/usb/isp1301.h>
27#include <linux/usb.h>
28#include <linux/usb/hcd.h>
29
30#include "ohci.h"
31
32#define USB_CONFIG_BASE 0x31020000
33
34/* USB_OTG_STAT_CONTROL bit defines */
35#define TRANSPARENT_I2C_EN (1 << 7)
36#define HOST_EN (1 << 0)
37
38/* On LPC32xx, those are undefined */
39#ifndef start_int_set_falling_edge
40#define start_int_set_falling_edge(irq)
41#define start_int_set_rising_edge(irq)
42#define start_int_ack(irq)
43#define start_int_mask(irq)
44#define start_int_umask(irq)
45#endif
46
47#define DRIVER_DESC "OHCI NXP driver"
48
49static const char hcd_name[] = "ohci-nxp";
50static struct hc_driver __read_mostly ohci_nxp_hc_driver;
51
52static struct i2c_client *isp1301_i2c_client;
53
54static void isp1301_configure_lpc32xx(void)
55{
56 /* LPC32XX only supports DAT_SE0 USB mode */
57 /* This sequence is important */
58
59 /* Disable transparent UART mode first */
60 i2c_smbus_write_byte_data(isp1301_i2c_client,
61 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
62 MC1_UART_EN);
63 i2c_smbus_write_byte_data(isp1301_i2c_client,
64 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
65 ~MC1_SPEED_REG);
66 i2c_smbus_write_byte_data(isp1301_i2c_client,
67 ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
68 i2c_smbus_write_byte_data(isp1301_i2c_client,
69 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
70 ~0);
71 i2c_smbus_write_byte_data(isp1301_i2c_client,
72 ISP1301_I2C_MODE_CONTROL_2,
73 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
74 i2c_smbus_write_byte_data(isp1301_i2c_client,
75 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
76 i2c_smbus_write_byte_data(isp1301_i2c_client,
77 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
78 i2c_smbus_write_byte_data(isp1301_i2c_client,
79 ISP1301_I2C_OTG_CONTROL_1,
80 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
81 i2c_smbus_write_byte_data(isp1301_i2c_client,
82 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
83 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
84 i2c_smbus_write_byte_data(isp1301_i2c_client,
85 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
86 i2c_smbus_write_byte_data(isp1301_i2c_client,
87 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
88 ~0);
89 i2c_smbus_write_byte_data(isp1301_i2c_client,
90 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
91
92 printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
93 i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
94 printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
95 i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
96 printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
97 i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
98}
99
100static void isp1301_configure(void)
101{
102 isp1301_configure_lpc32xx();
103}
104
105static inline void isp1301_vbus_on(void)
106{
107 i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
108 OTG1_VBUS_DRV);
109}
110
111static inline void isp1301_vbus_off(void)
112{
113 i2c_smbus_write_byte_data(isp1301_i2c_client,
114 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
115 OTG1_VBUS_DRV);
116}
117
118static void ohci_nxp_start_hc(void)
119{
120 void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
121 unsigned long tmp;
122
123 if (WARN_ON(!usb_otg_stat_control))
124 return;
125
126 tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
127
128 __raw_writel(tmp, usb_otg_stat_control);
129 isp1301_vbus_on();
130
131 iounmap(usb_otg_stat_control);
132}
133
134static void ohci_nxp_stop_hc(void)
135{
136 void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
137 unsigned long tmp;
138
139 if (WARN_ON(!usb_otg_stat_control))
140 return;
141
142 isp1301_vbus_off();
143 tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
144 __raw_writel(tmp, usb_otg_stat_control);
145
146 iounmap(usb_otg_stat_control);
147}
148
149static int ohci_hcd_nxp_probe(struct platform_device *pdev)
150{
151 struct usb_hcd *hcd = NULL;
152 const struct hc_driver *driver = &ohci_nxp_hc_driver;
153 struct resource *res;
154 int ret = 0, irq;
155 struct device_node *isp1301_node;
156 struct clk *usb_host_clk;
157
158 if (pdev->dev.of_node) {
159 isp1301_node = of_parse_phandle(pdev->dev.of_node,
160 "transceiver", 0);
161 } else {
162 isp1301_node = NULL;
163 }
164
165 isp1301_i2c_client = isp1301_get_client(isp1301_node);
166 of_node_put(isp1301_node);
167 if (!isp1301_i2c_client)
168 return -EPROBE_DEFER;
169
170 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
171 if (ret)
172 goto fail_disable;
173
174 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
175 if (usb_disabled()) {
176 dev_err(&pdev->dev, "USB is disabled\n");
177 ret = -ENODEV;
178 goto fail_disable;
179 }
180
181 /* Enable USB host clock */
182 usb_host_clk = devm_clk_get_enabled(&pdev->dev, NULL);
183 if (IS_ERR(usb_host_clk)) {
184 dev_err(&pdev->dev, "failed to acquire and start USB OHCI clock\n");
185 ret = PTR_ERR(usb_host_clk);
186 goto fail_disable;
187 }
188
189 isp1301_configure();
190
191 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
192 if (!hcd) {
193 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
194 ret = -ENOMEM;
195 goto fail_disable;
196 }
197
198 hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
199 if (IS_ERR(hcd->regs)) {
200 ret = PTR_ERR(hcd->regs);
201 goto fail_resource;
202 }
203 hcd->rsrc_start = res->start;
204 hcd->rsrc_len = resource_size(res);
205
206 irq = platform_get_irq(pdev, 0);
207 if (irq < 0) {
208 ret = -ENXIO;
209 goto fail_resource;
210 }
211
212 ohci_nxp_start_hc();
213 platform_set_drvdata(pdev, hcd);
214
215 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
216 ret = usb_add_hcd(hcd, irq, 0);
217 if (ret == 0) {
218 device_wakeup_enable(hcd->self.controller);
219 return ret;
220 }
221
222 ohci_nxp_stop_hc();
223fail_resource:
224 usb_put_hcd(hcd);
225fail_disable:
226 isp1301_i2c_client = NULL;
227 return ret;
228}
229
230static void ohci_hcd_nxp_remove(struct platform_device *pdev)
231{
232 struct usb_hcd *hcd = platform_get_drvdata(pdev);
233
234 usb_remove_hcd(hcd);
235 ohci_nxp_stop_hc();
236 usb_put_hcd(hcd);
237 isp1301_i2c_client = NULL;
238}
239
240/* work with hotplug and coldplug */
241MODULE_ALIAS("platform:usb-ohci");
242
243#ifdef CONFIG_OF
244static const struct of_device_id ohci_hcd_nxp_match[] = {
245 { .compatible = "nxp,ohci-nxp" },
246 {},
247};
248MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
249#endif
250
251static struct platform_driver ohci_hcd_nxp_driver = {
252 .driver = {
253 .name = "usb-ohci",
254 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
255 },
256 .probe = ohci_hcd_nxp_probe,
257 .remove = ohci_hcd_nxp_remove,
258};
259
260static int __init ohci_nxp_init(void)
261{
262 if (usb_disabled())
263 return -ENODEV;
264
265 ohci_init_driver(&ohci_nxp_hc_driver, NULL);
266 return platform_driver_register(&ohci_hcd_nxp_driver);
267}
268module_init(ohci_nxp_init);
269
270static void __exit ohci_nxp_cleanup(void)
271{
272 platform_driver_unregister(&ohci_hcd_nxp_driver);
273}
274module_exit(ohci_nxp_cleanup);
275
276MODULE_DESCRIPTION(DRIVER_DESC);
277MODULE_LICENSE("GPL v2");