Loading...
1/*
2 * timbuart.c timberdale FPGA UART driver
3 * Copyright (c) 2009 Intel Corporation
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19/* Supports:
20 * Timberdale FPGA UART
21 */
22
23#include <linux/pci.h>
24#include <linux/interrupt.h>
25#include <linux/serial_core.h>
26#include <linux/kernel.h>
27#include <linux/platform_device.h>
28#include <linux/ioport.h>
29#include <linux/slab.h>
30
31#include "timbuart.h"
32
33struct timbuart_port {
34 struct uart_port port;
35 struct tasklet_struct tasklet;
36 int usedma;
37 u32 last_ier;
38 struct platform_device *dev;
39};
40
41static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
42 921600, 1843200, 3250000};
43
44static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
45
46static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
47
48static void timbuart_stop_rx(struct uart_port *port)
49{
50 /* spin lock held by upper layer, disable all RX interrupts */
51 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
52 iowrite32(ier, port->membase + TIMBUART_IER);
53}
54
55static void timbuart_stop_tx(struct uart_port *port)
56{
57 /* spinlock held by upper layer, disable TX interrupt */
58 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
59 iowrite32(ier, port->membase + TIMBUART_IER);
60}
61
62static void timbuart_start_tx(struct uart_port *port)
63{
64 struct timbuart_port *uart =
65 container_of(port, struct timbuart_port, port);
66
67 /* do not transfer anything here -> fire off the tasklet */
68 tasklet_schedule(&uart->tasklet);
69}
70
71static unsigned int timbuart_tx_empty(struct uart_port *port)
72{
73 u32 isr = ioread32(port->membase + TIMBUART_ISR);
74
75 return (isr & TXBE) ? TIOCSER_TEMT : 0;
76}
77
78static void timbuart_flush_buffer(struct uart_port *port)
79{
80 if (!timbuart_tx_empty(port)) {
81 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
82 TIMBUART_CTRL_FLSHTX;
83
84 iowrite8(ctl, port->membase + TIMBUART_CTRL);
85 iowrite32(TXBF, port->membase + TIMBUART_ISR);
86 }
87}
88
89static void timbuart_rx_chars(struct uart_port *port)
90{
91 struct tty_struct *tty = port->state->port.tty;
92
93 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
94 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
95 port->icount.rx++;
96 tty_insert_flip_char(tty, ch, TTY_NORMAL);
97 }
98
99 spin_unlock(&port->lock);
100 tty_flip_buffer_push(port->state->port.tty);
101 spin_lock(&port->lock);
102
103 dev_dbg(port->dev, "%s - total read %d bytes\n",
104 __func__, port->icount.rx);
105}
106
107static void timbuart_tx_chars(struct uart_port *port)
108{
109 struct circ_buf *xmit = &port->state->xmit;
110
111 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
112 !uart_circ_empty(xmit)) {
113 iowrite8(xmit->buf[xmit->tail],
114 port->membase + TIMBUART_TXFIFO);
115 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
116 port->icount.tx++;
117 }
118
119 dev_dbg(port->dev,
120 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
121 __func__,
122 port->icount.tx,
123 ioread8(port->membase + TIMBUART_CTRL),
124 port->mctrl & TIOCM_RTS,
125 ioread8(port->membase + TIMBUART_BAUDRATE));
126}
127
128static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
129{
130 struct timbuart_port *uart =
131 container_of(port, struct timbuart_port, port);
132 struct circ_buf *xmit = &port->state->xmit;
133
134 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
135 return;
136
137 if (port->x_char)
138 return;
139
140 if (isr & TXFLAGS) {
141 timbuart_tx_chars(port);
142 /* clear all TX interrupts */
143 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
144
145 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
146 uart_write_wakeup(port);
147 } else
148 /* Re-enable any tx interrupt */
149 *ier |= uart->last_ier & TXFLAGS;
150
151 /* enable interrupts if there are chars in the transmit buffer,
152 * Or if we delivered some bytes and want the almost empty interrupt
153 * we wake up the upper layer later when we got the interrupt
154 * to give it some time to go out...
155 */
156 if (!uart_circ_empty(xmit))
157 *ier |= TXBAE;
158
159 dev_dbg(port->dev, "%s - leaving\n", __func__);
160}
161
162void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
163{
164 if (isr & RXFLAGS) {
165 /* Some RX status is set */
166 if (isr & RXBF) {
167 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
168 TIMBUART_CTRL_FLSHRX;
169 iowrite8(ctl, port->membase + TIMBUART_CTRL);
170 port->icount.overrun++;
171 } else if (isr & (RXDP))
172 timbuart_rx_chars(port);
173
174 /* ack all RX interrupts */
175 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
176 }
177
178 /* always have the RX interrupts enabled */
179 *ier |= RXBAF | RXBF | RXTT;
180
181 dev_dbg(port->dev, "%s - leaving\n", __func__);
182}
183
184void timbuart_tasklet(unsigned long arg)
185{
186 struct timbuart_port *uart = (struct timbuart_port *)arg;
187 u32 isr, ier = 0;
188
189 spin_lock(&uart->port.lock);
190
191 isr = ioread32(uart->port.membase + TIMBUART_ISR);
192 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
193
194 if (!uart->usedma)
195 timbuart_handle_tx_port(&uart->port, isr, &ier);
196
197 timbuart_mctrl_check(&uart->port, isr, &ier);
198
199 if (!uart->usedma)
200 timbuart_handle_rx_port(&uart->port, isr, &ier);
201
202 iowrite32(ier, uart->port.membase + TIMBUART_IER);
203
204 spin_unlock(&uart->port.lock);
205 dev_dbg(uart->port.dev, "%s leaving\n", __func__);
206}
207
208static unsigned int timbuart_get_mctrl(struct uart_port *port)
209{
210 u8 cts = ioread8(port->membase + TIMBUART_CTRL);
211 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
212
213 if (cts & TIMBUART_CTRL_CTS)
214 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
215 else
216 return TIOCM_DSR | TIOCM_CAR;
217}
218
219static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
220{
221 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
222
223 if (mctrl & TIOCM_RTS)
224 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
225 else
226 iowrite8(0, port->membase + TIMBUART_CTRL);
227}
228
229static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
230{
231 unsigned int cts;
232
233 if (isr & CTS_DELTA) {
234 /* ack */
235 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
236 cts = timbuart_get_mctrl(port);
237 uart_handle_cts_change(port, cts & TIOCM_CTS);
238 wake_up_interruptible(&port->state->port.delta_msr_wait);
239 }
240
241 *ier |= CTS_DELTA;
242}
243
244static void timbuart_enable_ms(struct uart_port *port)
245{
246 /* N/A */
247}
248
249static void timbuart_break_ctl(struct uart_port *port, int ctl)
250{
251 /* N/A */
252}
253
254static int timbuart_startup(struct uart_port *port)
255{
256 struct timbuart_port *uart =
257 container_of(port, struct timbuart_port, port);
258
259 dev_dbg(port->dev, "%s\n", __func__);
260
261 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
262 iowrite32(0x1ff, port->membase + TIMBUART_ISR);
263 /* Enable all but TX interrupts */
264 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
265 port->membase + TIMBUART_IER);
266
267 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
268 "timb-uart", uart);
269}
270
271static void timbuart_shutdown(struct uart_port *port)
272{
273 struct timbuart_port *uart =
274 container_of(port, struct timbuart_port, port);
275 dev_dbg(port->dev, "%s\n", __func__);
276 free_irq(port->irq, uart);
277 iowrite32(0, port->membase + TIMBUART_IER);
278}
279
280static int get_bindex(int baud)
281{
282 int i;
283
284 for (i = 0; i < ARRAY_SIZE(baudrates); i++)
285 if (baud <= baudrates[i])
286 return i;
287
288 return -1;
289}
290
291static void timbuart_set_termios(struct uart_port *port,
292 struct ktermios *termios,
293 struct ktermios *old)
294{
295 unsigned int baud;
296 short bindex;
297 unsigned long flags;
298
299 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
300 bindex = get_bindex(baud);
301 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
302
303 if (bindex < 0)
304 bindex = 0;
305 baud = baudrates[bindex];
306
307 /* The serial layer calls into this once with old = NULL when setting
308 up initially */
309 if (old)
310 tty_termios_copy_hw(termios, old);
311 tty_termios_encode_baud_rate(termios, baud, baud);
312
313 spin_lock_irqsave(&port->lock, flags);
314 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
315 uart_update_timeout(port, termios->c_cflag, baud);
316 spin_unlock_irqrestore(&port->lock, flags);
317}
318
319static const char *timbuart_type(struct uart_port *port)
320{
321 return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
322}
323
324/* We do not request/release mappings of the registers here,
325 * currently it's done in the proble function.
326 */
327static void timbuart_release_port(struct uart_port *port)
328{
329 struct platform_device *pdev = to_platform_device(port->dev);
330 int size =
331 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
332
333 if (port->flags & UPF_IOREMAP) {
334 iounmap(port->membase);
335 port->membase = NULL;
336 }
337
338 release_mem_region(port->mapbase, size);
339}
340
341static int timbuart_request_port(struct uart_port *port)
342{
343 struct platform_device *pdev = to_platform_device(port->dev);
344 int size =
345 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
346
347 if (!request_mem_region(port->mapbase, size, "timb-uart"))
348 return -EBUSY;
349
350 if (port->flags & UPF_IOREMAP) {
351 port->membase = ioremap(port->mapbase, size);
352 if (port->membase == NULL) {
353 release_mem_region(port->mapbase, size);
354 return -ENOMEM;
355 }
356 }
357
358 return 0;
359}
360
361static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
362{
363 struct timbuart_port *uart = (struct timbuart_port *)devid;
364
365 if (ioread8(uart->port.membase + TIMBUART_IPR)) {
366 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
367
368 /* disable interrupts, the tasklet enables them again */
369 iowrite32(0, uart->port.membase + TIMBUART_IER);
370
371 /* fire off bottom half */
372 tasklet_schedule(&uart->tasklet);
373
374 return IRQ_HANDLED;
375 } else
376 return IRQ_NONE;
377}
378
379/*
380 * Configure/autoconfigure the port.
381 */
382static void timbuart_config_port(struct uart_port *port, int flags)
383{
384 if (flags & UART_CONFIG_TYPE) {
385 port->type = PORT_TIMBUART;
386 timbuart_request_port(port);
387 }
388}
389
390static int timbuart_verify_port(struct uart_port *port,
391 struct serial_struct *ser)
392{
393 /* we don't want the core code to modify any port params */
394 return -EINVAL;
395}
396
397static struct uart_ops timbuart_ops = {
398 .tx_empty = timbuart_tx_empty,
399 .set_mctrl = timbuart_set_mctrl,
400 .get_mctrl = timbuart_get_mctrl,
401 .stop_tx = timbuart_stop_tx,
402 .start_tx = timbuart_start_tx,
403 .flush_buffer = timbuart_flush_buffer,
404 .stop_rx = timbuart_stop_rx,
405 .enable_ms = timbuart_enable_ms,
406 .break_ctl = timbuart_break_ctl,
407 .startup = timbuart_startup,
408 .shutdown = timbuart_shutdown,
409 .set_termios = timbuart_set_termios,
410 .type = timbuart_type,
411 .release_port = timbuart_release_port,
412 .request_port = timbuart_request_port,
413 .config_port = timbuart_config_port,
414 .verify_port = timbuart_verify_port
415};
416
417static struct uart_driver timbuart_driver = {
418 .owner = THIS_MODULE,
419 .driver_name = "timberdale_uart",
420 .dev_name = "ttyTU",
421 .major = TIMBUART_MAJOR,
422 .minor = TIMBUART_MINOR,
423 .nr = 1
424};
425
426static int __devinit timbuart_probe(struct platform_device *dev)
427{
428 int err, irq;
429 struct timbuart_port *uart;
430 struct resource *iomem;
431
432 dev_dbg(&dev->dev, "%s\n", __func__);
433
434 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
435 if (!uart) {
436 err = -EINVAL;
437 goto err_mem;
438 }
439
440 uart->usedma = 0;
441
442 uart->port.uartclk = 3250000 * 16;
443 uart->port.fifosize = TIMBUART_FIFO_SIZE;
444 uart->port.regshift = 2;
445 uart->port.iotype = UPIO_MEM;
446 uart->port.ops = &timbuart_ops;
447 uart->port.irq = 0;
448 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
449 uart->port.line = 0;
450 uart->port.dev = &dev->dev;
451
452 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
453 if (!iomem) {
454 err = -ENOMEM;
455 goto err_register;
456 }
457 uart->port.mapbase = iomem->start;
458 uart->port.membase = NULL;
459
460 irq = platform_get_irq(dev, 0);
461 if (irq < 0) {
462 err = -EINVAL;
463 goto err_register;
464 }
465 uart->port.irq = irq;
466
467 tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
468
469 err = uart_register_driver(&timbuart_driver);
470 if (err)
471 goto err_register;
472
473 err = uart_add_one_port(&timbuart_driver, &uart->port);
474 if (err)
475 goto err_add_port;
476
477 platform_set_drvdata(dev, uart);
478
479 return 0;
480
481err_add_port:
482 uart_unregister_driver(&timbuart_driver);
483err_register:
484 kfree(uart);
485err_mem:
486 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
487 err);
488
489 return err;
490}
491
492static int __devexit timbuart_remove(struct platform_device *dev)
493{
494 struct timbuart_port *uart = platform_get_drvdata(dev);
495
496 tasklet_kill(&uart->tasklet);
497 uart_remove_one_port(&timbuart_driver, &uart->port);
498 uart_unregister_driver(&timbuart_driver);
499 kfree(uart);
500
501 return 0;
502}
503
504static struct platform_driver timbuart_platform_driver = {
505 .driver = {
506 .name = "timb-uart",
507 .owner = THIS_MODULE,
508 },
509 .probe = timbuart_probe,
510 .remove = __devexit_p(timbuart_remove),
511};
512
513/*--------------------------------------------------------------------------*/
514
515static int __init timbuart_init(void)
516{
517 return platform_driver_register(&timbuart_platform_driver);
518}
519
520static void __exit timbuart_exit(void)
521{
522 platform_driver_unregister(&timbuart_platform_driver);
523}
524
525module_init(timbuart_init);
526module_exit(timbuart_exit);
527
528MODULE_DESCRIPTION("Timberdale UART driver");
529MODULE_LICENSE("GPL v2");
530MODULE_ALIAS("platform:timb-uart");
531
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * timbuart.c timberdale FPGA UART driver
4 * Copyright (c) 2009 Intel Corporation
5 */
6
7/* Supports:
8 * Timberdale FPGA UART
9 */
10
11#include <linux/pci.h>
12#include <linux/interrupt.h>
13#include <linux/serial_core.h>
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/kernel.h>
17#include <linux/platform_device.h>
18#include <linux/ioport.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21
22#include "timbuart.h"
23
24struct timbuart_port {
25 struct uart_port port;
26 struct tasklet_struct tasklet;
27 int usedma;
28 u32 last_ier;
29 struct platform_device *dev;
30};
31
32static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
33 921600, 1843200, 3250000};
34
35static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
36
37static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
38
39static void timbuart_stop_rx(struct uart_port *port)
40{
41 /* spin lock held by upper layer, disable all RX interrupts */
42 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
43 iowrite32(ier, port->membase + TIMBUART_IER);
44}
45
46static void timbuart_stop_tx(struct uart_port *port)
47{
48 /* spinlock held by upper layer, disable TX interrupt */
49 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
50 iowrite32(ier, port->membase + TIMBUART_IER);
51}
52
53static void timbuart_start_tx(struct uart_port *port)
54{
55 struct timbuart_port *uart =
56 container_of(port, struct timbuart_port, port);
57
58 /* do not transfer anything here -> fire off the tasklet */
59 tasklet_schedule(&uart->tasklet);
60}
61
62static unsigned int timbuart_tx_empty(struct uart_port *port)
63{
64 u32 isr = ioread32(port->membase + TIMBUART_ISR);
65
66 return (isr & TXBE) ? TIOCSER_TEMT : 0;
67}
68
69static void timbuart_flush_buffer(struct uart_port *port)
70{
71 if (!timbuart_tx_empty(port)) {
72 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
73 TIMBUART_CTRL_FLSHTX;
74
75 iowrite8(ctl, port->membase + TIMBUART_CTRL);
76 iowrite32(TXBF, port->membase + TIMBUART_ISR);
77 }
78}
79
80static void timbuart_rx_chars(struct uart_port *port)
81{
82 struct tty_port *tport = &port->state->port;
83
84 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
85 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
86 port->icount.rx++;
87 tty_insert_flip_char(tport, ch, TTY_NORMAL);
88 }
89
90 tty_flip_buffer_push(tport);
91
92 dev_dbg(port->dev, "%s - total read %d bytes\n",
93 __func__, port->icount.rx);
94}
95
96static void timbuart_tx_chars(struct uart_port *port)
97{
98 unsigned char ch;
99
100 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
101 uart_fifo_get(port, &ch))
102 iowrite8(ch, port->membase + TIMBUART_TXFIFO);
103
104 dev_dbg(port->dev,
105 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
106 __func__,
107 port->icount.tx,
108 ioread8(port->membase + TIMBUART_CTRL),
109 port->mctrl & TIOCM_RTS,
110 ioread8(port->membase + TIMBUART_BAUDRATE));
111}
112
113static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
114{
115 struct timbuart_port *uart =
116 container_of(port, struct timbuart_port, port);
117 struct tty_port *tport = &port->state->port;
118
119 if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
120 return;
121
122 if (port->x_char)
123 return;
124
125 if (isr & TXFLAGS) {
126 timbuart_tx_chars(port);
127 /* clear all TX interrupts */
128 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
129
130 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
131 uart_write_wakeup(port);
132 } else
133 /* Re-enable any tx interrupt */
134 *ier |= uart->last_ier & TXFLAGS;
135
136 /* enable interrupts if there are chars in the transmit buffer,
137 * Or if we delivered some bytes and want the almost empty interrupt
138 * we wake up the upper layer later when we got the interrupt
139 * to give it some time to go out...
140 */
141 if (!kfifo_is_empty(&tport->xmit_fifo))
142 *ier |= TXBAE;
143
144 dev_dbg(port->dev, "%s - leaving\n", __func__);
145}
146
147static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
148{
149 if (isr & RXFLAGS) {
150 /* Some RX status is set */
151 if (isr & RXBF) {
152 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
153 TIMBUART_CTRL_FLSHRX;
154 iowrite8(ctl, port->membase + TIMBUART_CTRL);
155 port->icount.overrun++;
156 } else if (isr & (RXDP))
157 timbuart_rx_chars(port);
158
159 /* ack all RX interrupts */
160 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
161 }
162
163 /* always have the RX interrupts enabled */
164 *ier |= RXBAF | RXBF | RXTT;
165
166 dev_dbg(port->dev, "%s - leaving\n", __func__);
167}
168
169static void timbuart_tasklet(struct tasklet_struct *t)
170{
171 struct timbuart_port *uart = from_tasklet(uart, t, tasklet);
172 u32 isr, ier = 0;
173
174 uart_port_lock(&uart->port);
175
176 isr = ioread32(uart->port.membase + TIMBUART_ISR);
177 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
178
179 if (!uart->usedma)
180 timbuart_handle_tx_port(&uart->port, isr, &ier);
181
182 timbuart_mctrl_check(&uart->port, isr, &ier);
183
184 if (!uart->usedma)
185 timbuart_handle_rx_port(&uart->port, isr, &ier);
186
187 iowrite32(ier, uart->port.membase + TIMBUART_IER);
188
189 uart_port_unlock(&uart->port);
190 dev_dbg(uart->port.dev, "%s leaving\n", __func__);
191}
192
193static unsigned int timbuart_get_mctrl(struct uart_port *port)
194{
195 u8 cts = ioread8(port->membase + TIMBUART_CTRL);
196 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
197
198 if (cts & TIMBUART_CTRL_CTS)
199 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
200 else
201 return TIOCM_DSR | TIOCM_CAR;
202}
203
204static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
205{
206 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
207
208 if (mctrl & TIOCM_RTS)
209 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
210 else
211 iowrite8(0, port->membase + TIMBUART_CTRL);
212}
213
214static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
215{
216 unsigned int cts;
217
218 if (isr & CTS_DELTA) {
219 /* ack */
220 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
221 cts = timbuart_get_mctrl(port);
222 uart_handle_cts_change(port, cts & TIOCM_CTS);
223 wake_up_interruptible(&port->state->port.delta_msr_wait);
224 }
225
226 *ier |= CTS_DELTA;
227}
228
229static void timbuart_break_ctl(struct uart_port *port, int ctl)
230{
231 /* N/A */
232}
233
234static int timbuart_startup(struct uart_port *port)
235{
236 struct timbuart_port *uart =
237 container_of(port, struct timbuart_port, port);
238
239 dev_dbg(port->dev, "%s\n", __func__);
240
241 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
242 iowrite32(0x1ff, port->membase + TIMBUART_ISR);
243 /* Enable all but TX interrupts */
244 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
245 port->membase + TIMBUART_IER);
246
247 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
248 "timb-uart", uart);
249}
250
251static void timbuart_shutdown(struct uart_port *port)
252{
253 struct timbuart_port *uart =
254 container_of(port, struct timbuart_port, port);
255 dev_dbg(port->dev, "%s\n", __func__);
256 free_irq(port->irq, uart);
257 iowrite32(0, port->membase + TIMBUART_IER);
258
259 timbuart_flush_buffer(port);
260}
261
262static int get_bindex(int baud)
263{
264 int i;
265
266 for (i = 0; i < ARRAY_SIZE(baudrates); i++)
267 if (baud <= baudrates[i])
268 return i;
269
270 return -1;
271}
272
273static void timbuart_set_termios(struct uart_port *port,
274 struct ktermios *termios,
275 const struct ktermios *old)
276{
277 unsigned int baud;
278 short bindex;
279 unsigned long flags;
280
281 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
282 bindex = get_bindex(baud);
283 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
284
285 if (bindex < 0)
286 bindex = 0;
287 baud = baudrates[bindex];
288
289 /* The serial layer calls into this once with old = NULL when setting
290 up initially */
291 if (old)
292 tty_termios_copy_hw(termios, old);
293 tty_termios_encode_baud_rate(termios, baud, baud);
294
295 uart_port_lock_irqsave(port, &flags);
296 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
297 uart_update_timeout(port, termios->c_cflag, baud);
298 uart_port_unlock_irqrestore(port, flags);
299}
300
301static const char *timbuart_type(struct uart_port *port)
302{
303 return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
304}
305
306/* We do not request/release mappings of the registers here,
307 * currently it's done in the proble function.
308 */
309static void timbuart_release_port(struct uart_port *port)
310{
311 struct platform_device *pdev = to_platform_device(port->dev);
312 int size =
313 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
314
315 if (port->flags & UPF_IOREMAP) {
316 iounmap(port->membase);
317 port->membase = NULL;
318 }
319
320 release_mem_region(port->mapbase, size);
321}
322
323static int timbuart_request_port(struct uart_port *port)
324{
325 struct platform_device *pdev = to_platform_device(port->dev);
326 int size =
327 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
328
329 if (!request_mem_region(port->mapbase, size, "timb-uart"))
330 return -EBUSY;
331
332 if (port->flags & UPF_IOREMAP) {
333 port->membase = ioremap(port->mapbase, size);
334 if (port->membase == NULL) {
335 release_mem_region(port->mapbase, size);
336 return -ENOMEM;
337 }
338 }
339
340 return 0;
341}
342
343static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
344{
345 struct timbuart_port *uart = (struct timbuart_port *)devid;
346
347 if (ioread8(uart->port.membase + TIMBUART_IPR)) {
348 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
349
350 /* disable interrupts, the tasklet enables them again */
351 iowrite32(0, uart->port.membase + TIMBUART_IER);
352
353 /* fire off bottom half */
354 tasklet_schedule(&uart->tasklet);
355
356 return IRQ_HANDLED;
357 } else
358 return IRQ_NONE;
359}
360
361/*
362 * Configure/autoconfigure the port.
363 */
364static void timbuart_config_port(struct uart_port *port, int flags)
365{
366 if (flags & UART_CONFIG_TYPE) {
367 port->type = PORT_TIMBUART;
368 timbuart_request_port(port);
369 }
370}
371
372static int timbuart_verify_port(struct uart_port *port,
373 struct serial_struct *ser)
374{
375 /* we don't want the core code to modify any port params */
376 return -EINVAL;
377}
378
379static const struct uart_ops timbuart_ops = {
380 .tx_empty = timbuart_tx_empty,
381 .set_mctrl = timbuart_set_mctrl,
382 .get_mctrl = timbuart_get_mctrl,
383 .stop_tx = timbuart_stop_tx,
384 .start_tx = timbuart_start_tx,
385 .flush_buffer = timbuart_flush_buffer,
386 .stop_rx = timbuart_stop_rx,
387 .break_ctl = timbuart_break_ctl,
388 .startup = timbuart_startup,
389 .shutdown = timbuart_shutdown,
390 .set_termios = timbuart_set_termios,
391 .type = timbuart_type,
392 .release_port = timbuart_release_port,
393 .request_port = timbuart_request_port,
394 .config_port = timbuart_config_port,
395 .verify_port = timbuart_verify_port
396};
397
398static struct uart_driver timbuart_driver = {
399 .owner = THIS_MODULE,
400 .driver_name = "timberdale_uart",
401 .dev_name = "ttyTU",
402 .major = TIMBUART_MAJOR,
403 .minor = TIMBUART_MINOR,
404 .nr = 1
405};
406
407static int timbuart_probe(struct platform_device *dev)
408{
409 int err, irq;
410 struct timbuart_port *uart;
411 struct resource *iomem;
412
413 dev_dbg(&dev->dev, "%s\n", __func__);
414
415 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
416 if (!uart) {
417 err = -EINVAL;
418 goto err_mem;
419 }
420
421 uart->usedma = 0;
422
423 uart->port.uartclk = 3250000 * 16;
424 uart->port.fifosize = TIMBUART_FIFO_SIZE;
425 uart->port.regshift = 2;
426 uart->port.iotype = UPIO_MEM;
427 uart->port.ops = &timbuart_ops;
428 uart->port.irq = 0;
429 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
430 uart->port.line = 0;
431 uart->port.dev = &dev->dev;
432
433 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
434 if (!iomem) {
435 err = -ENOMEM;
436 goto err_register;
437 }
438 uart->port.mapbase = iomem->start;
439 uart->port.membase = NULL;
440
441 irq = platform_get_irq(dev, 0);
442 if (irq < 0) {
443 err = -EINVAL;
444 goto err_register;
445 }
446 uart->port.irq = irq;
447
448 tasklet_setup(&uart->tasklet, timbuart_tasklet);
449
450 err = uart_register_driver(&timbuart_driver);
451 if (err)
452 goto err_register;
453
454 err = uart_add_one_port(&timbuart_driver, &uart->port);
455 if (err)
456 goto err_add_port;
457
458 platform_set_drvdata(dev, uart);
459
460 return 0;
461
462err_add_port:
463 uart_unregister_driver(&timbuart_driver);
464err_register:
465 kfree(uart);
466err_mem:
467 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
468 err);
469
470 return err;
471}
472
473static void timbuart_remove(struct platform_device *dev)
474{
475 struct timbuart_port *uart = platform_get_drvdata(dev);
476
477 tasklet_kill(&uart->tasklet);
478 uart_remove_one_port(&timbuart_driver, &uart->port);
479 uart_unregister_driver(&timbuart_driver);
480 kfree(uart);
481}
482
483static struct platform_driver timbuart_platform_driver = {
484 .driver = {
485 .name = "timb-uart",
486 },
487 .probe = timbuart_probe,
488 .remove = timbuart_remove,
489};
490
491module_platform_driver(timbuart_platform_driver);
492
493MODULE_DESCRIPTION("Timberdale UART driver");
494MODULE_LICENSE("GPL v2");
495MODULE_ALIAS("platform:timb-uart");
496