Loading...
1/*
2 * dz.c: Serial port driver for DECstations equipped
3 * with the DZ chipset.
4 *
5 * Copyright (C) 1998 Olivier A. D. Lebaillif
6 *
7 * Email: olivier.lebaillif@ifrsys.com
8 *
9 * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki
10 *
11 * [31-AUG-98] triemer
12 * Changed IRQ to use Harald's dec internals interrupts.h
13 * removed base_addr code - moving address assignment to setup.c
14 * Changed name of dz_init to rs_init to be consistent with tc code
15 * [13-NOV-98] triemer fixed code to receive characters
16 * after patches by harald to irq code.
17 * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
18 * field from "current" - somewhere between 2.1.121 and 2.1.131
19 Qua Jun 27 15:02:26 BRT 2001
20 * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
21 *
22 * Parts (C) 1999 David Airlie, airlied@linux.ie
23 * [07-SEP-99] Bugfixes
24 *
25 * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
26 * Converted to new serial core
27 */
28
29#undef DEBUG_DZ
30
31#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
32#define SUPPORT_SYSRQ
33#endif
34
35#include <linux/bitops.h>
36#include <linux/compiler.h>
37#include <linux/console.h>
38#include <linux/delay.h>
39#include <linux/errno.h>
40#include <linux/init.h>
41#include <linux/interrupt.h>
42#include <linux/ioport.h>
43#include <linux/kernel.h>
44#include <linux/major.h>
45#include <linux/module.h>
46#include <linux/serial.h>
47#include <linux/serial_core.h>
48#include <linux/sysrq.h>
49#include <linux/tty.h>
50
51#include <linux/atomic.h>
52#include <asm/bootinfo.h>
53#include <asm/io.h>
54#include <asm/system.h>
55
56#include <asm/dec/interrupts.h>
57#include <asm/dec/kn01.h>
58#include <asm/dec/kn02.h>
59#include <asm/dec/machtype.h>
60#include <asm/dec/prom.h>
61#include <asm/dec/system.h>
62
63#include "dz.h"
64
65
66MODULE_DESCRIPTION("DECstation DZ serial driver");
67MODULE_LICENSE("GPL");
68
69
70static char dz_name[] __initdata = "DECstation DZ serial driver version ";
71static char dz_version[] __initdata = "1.04";
72
73struct dz_port {
74 struct dz_mux *mux;
75 struct uart_port port;
76 unsigned int cflag;
77};
78
79struct dz_mux {
80 struct dz_port dport[DZ_NB_PORT];
81 atomic_t map_guard;
82 atomic_t irq_guard;
83 int initialised;
84};
85
86static struct dz_mux dz_mux;
87
88static inline struct dz_port *to_dport(struct uart_port *uport)
89{
90 return container_of(uport, struct dz_port, port);
91}
92
93/*
94 * ------------------------------------------------------------
95 * dz_in () and dz_out ()
96 *
97 * These routines are used to access the registers of the DZ
98 * chip, hiding relocation differences between implementation.
99 * ------------------------------------------------------------
100 */
101
102static u16 dz_in(struct dz_port *dport, unsigned offset)
103{
104 void __iomem *addr = dport->port.membase + offset;
105
106 return readw(addr);
107}
108
109static void dz_out(struct dz_port *dport, unsigned offset, u16 value)
110{
111 void __iomem *addr = dport->port.membase + offset;
112
113 writew(value, addr);
114}
115
116/*
117 * ------------------------------------------------------------
118 * rs_stop () and rs_start ()
119 *
120 * These routines are called before setting or resetting
121 * tty->stopped. They enable or disable transmitter interrupts,
122 * as necessary.
123 * ------------------------------------------------------------
124 */
125
126static void dz_stop_tx(struct uart_port *uport)
127{
128 struct dz_port *dport = to_dport(uport);
129 u16 tmp, mask = 1 << dport->port.line;
130
131 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
132 tmp &= ~mask; /* clear the TX flag */
133 dz_out(dport, DZ_TCR, tmp);
134}
135
136static void dz_start_tx(struct uart_port *uport)
137{
138 struct dz_port *dport = to_dport(uport);
139 u16 tmp, mask = 1 << dport->port.line;
140
141 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
142 tmp |= mask; /* set the TX flag */
143 dz_out(dport, DZ_TCR, tmp);
144}
145
146static void dz_stop_rx(struct uart_port *uport)
147{
148 struct dz_port *dport = to_dport(uport);
149
150 dport->cflag &= ~DZ_RXENAB;
151 dz_out(dport, DZ_LPR, dport->cflag);
152}
153
154static void dz_enable_ms(struct uart_port *uport)
155{
156 /* nothing to do */
157}
158
159/*
160 * ------------------------------------------------------------
161 *
162 * Here start the interrupt handling routines. All of the following
163 * subroutines are declared as inline and are folded into
164 * dz_interrupt. They were separated out for readability's sake.
165 *
166 * Note: dz_interrupt() is a "fast" interrupt, which means that it
167 * runs with interrupts turned off. People who may want to modify
168 * dz_interrupt() should try to keep the interrupt handler as fast as
169 * possible. After you are done making modifications, it is not a bad
170 * idea to do:
171 *
172 * make drivers/serial/dz.s
173 *
174 * and look at the resulting assemble code in dz.s.
175 *
176 * ------------------------------------------------------------
177 */
178
179/*
180 * ------------------------------------------------------------
181 * receive_char ()
182 *
183 * This routine deals with inputs from any lines.
184 * ------------------------------------------------------------
185 */
186static inline void dz_receive_chars(struct dz_mux *mux)
187{
188 struct uart_port *uport;
189 struct dz_port *dport = &mux->dport[0];
190 struct tty_struct *tty = NULL;
191 struct uart_icount *icount;
192 int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
193 unsigned char ch, flag;
194 u16 status;
195 int i;
196
197 while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
198 dport = &mux->dport[LINE(status)];
199 uport = &dport->port;
200 tty = uport->state->port.tty; /* point to the proper dev */
201
202 ch = UCHAR(status); /* grab the char */
203 flag = TTY_NORMAL;
204
205 icount = &uport->icount;
206 icount->rx++;
207
208 if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) {
209
210 /*
211 * There is no separate BREAK status bit, so treat
212 * null characters with framing errors as BREAKs;
213 * normally, otherwise. For this move the Framing
214 * Error bit to a simulated BREAK bit.
215 */
216 if (!ch) {
217 status |= (status & DZ_FERR) >>
218 (ffs(DZ_FERR) - ffs(DZ_BREAK));
219 status &= ~DZ_FERR;
220 }
221
222 /* Handle SysRq/SAK & keep track of the statistics. */
223 if (status & DZ_BREAK) {
224 icount->brk++;
225 if (uart_handle_break(uport))
226 continue;
227 } else if (status & DZ_FERR)
228 icount->frame++;
229 else if (status & DZ_PERR)
230 icount->parity++;
231 if (status & DZ_OERR)
232 icount->overrun++;
233
234 status &= uport->read_status_mask;
235 if (status & DZ_BREAK)
236 flag = TTY_BREAK;
237 else if (status & DZ_FERR)
238 flag = TTY_FRAME;
239 else if (status & DZ_PERR)
240 flag = TTY_PARITY;
241
242 }
243
244 if (uart_handle_sysrq_char(uport, ch))
245 continue;
246
247 uart_insert_char(uport, status, DZ_OERR, ch, flag);
248 lines_rx[LINE(status)] = 1;
249 }
250 for (i = 0; i < DZ_NB_PORT; i++)
251 if (lines_rx[i])
252 tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
253}
254
255/*
256 * ------------------------------------------------------------
257 * transmit_char ()
258 *
259 * This routine deals with outputs to any lines.
260 * ------------------------------------------------------------
261 */
262static inline void dz_transmit_chars(struct dz_mux *mux)
263{
264 struct dz_port *dport = &mux->dport[0];
265 struct circ_buf *xmit;
266 unsigned char tmp;
267 u16 status;
268
269 status = dz_in(dport, DZ_CSR);
270 dport = &mux->dport[LINE(status)];
271 xmit = &dport->port.state->xmit;
272
273 if (dport->port.x_char) { /* XON/XOFF chars */
274 dz_out(dport, DZ_TDR, dport->port.x_char);
275 dport->port.icount.tx++;
276 dport->port.x_char = 0;
277 return;
278 }
279 /* If nothing to do or stopped or hardware stopped. */
280 if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) {
281 spin_lock(&dport->port.lock);
282 dz_stop_tx(&dport->port);
283 spin_unlock(&dport->port.lock);
284 return;
285 }
286
287 /*
288 * If something to do... (remember the dz has no output fifo,
289 * so we go one char at a time) :-<
290 */
291 tmp = xmit->buf[xmit->tail];
292 xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1);
293 dz_out(dport, DZ_TDR, tmp);
294 dport->port.icount.tx++;
295
296 if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS)
297 uart_write_wakeup(&dport->port);
298
299 /* Are we are done. */
300 if (uart_circ_empty(xmit)) {
301 spin_lock(&dport->port.lock);
302 dz_stop_tx(&dport->port);
303 spin_unlock(&dport->port.lock);
304 }
305}
306
307/*
308 * ------------------------------------------------------------
309 * check_modem_status()
310 *
311 * DS 3100 & 5100: Only valid for the MODEM line, duh!
312 * DS 5000/200: Valid for the MODEM and PRINTER line.
313 * ------------------------------------------------------------
314 */
315static inline void check_modem_status(struct dz_port *dport)
316{
317 /*
318 * FIXME:
319 * 1. No status change interrupt; use a timer.
320 * 2. Handle the 3100/5000 as appropriate. --macro
321 */
322 u16 status;
323
324 /* If not the modem line just return. */
325 if (dport->port.line != DZ_MODEM)
326 return;
327
328 status = dz_in(dport, DZ_MSR);
329
330 /* it's easy, since DSR2 is the only bit in the register */
331 if (status)
332 dport->port.icount.dsr++;
333}
334
335/*
336 * ------------------------------------------------------------
337 * dz_interrupt ()
338 *
339 * this is the main interrupt routine for the DZ chip.
340 * It deals with the multiple ports.
341 * ------------------------------------------------------------
342 */
343static irqreturn_t dz_interrupt(int irq, void *dev_id)
344{
345 struct dz_mux *mux = dev_id;
346 struct dz_port *dport = &mux->dport[0];
347 u16 status;
348
349 /* get the reason why we just got an irq */
350 status = dz_in(dport, DZ_CSR);
351
352 if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE))
353 dz_receive_chars(mux);
354
355 if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE))
356 dz_transmit_chars(mux);
357
358 return IRQ_HANDLED;
359}
360
361/*
362 * -------------------------------------------------------------------
363 * Here ends the DZ interrupt routines.
364 * -------------------------------------------------------------------
365 */
366
367static unsigned int dz_get_mctrl(struct uart_port *uport)
368{
369 /*
370 * FIXME: Handle the 3100/5000 as appropriate. --macro
371 */
372 struct dz_port *dport = to_dport(uport);
373 unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
374
375 if (dport->port.line == DZ_MODEM) {
376 if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR)
377 mctrl &= ~TIOCM_DSR;
378 }
379
380 return mctrl;
381}
382
383static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
384{
385 /*
386 * FIXME: Handle the 3100/5000 as appropriate. --macro
387 */
388 struct dz_port *dport = to_dport(uport);
389 u16 tmp;
390
391 if (dport->port.line == DZ_MODEM) {
392 tmp = dz_in(dport, DZ_TCR);
393 if (mctrl & TIOCM_DTR)
394 tmp &= ~DZ_MODEM_DTR;
395 else
396 tmp |= DZ_MODEM_DTR;
397 dz_out(dport, DZ_TCR, tmp);
398 }
399}
400
401/*
402 * -------------------------------------------------------------------
403 * startup ()
404 *
405 * various initialization tasks
406 * -------------------------------------------------------------------
407 */
408static int dz_startup(struct uart_port *uport)
409{
410 struct dz_port *dport = to_dport(uport);
411 struct dz_mux *mux = dport->mux;
412 unsigned long flags;
413 int irq_guard;
414 int ret;
415 u16 tmp;
416
417 irq_guard = atomic_add_return(1, &mux->irq_guard);
418 if (irq_guard != 1)
419 return 0;
420
421 ret = request_irq(dport->port.irq, dz_interrupt,
422 IRQF_SHARED, "dz", mux);
423 if (ret) {
424 atomic_add(-1, &mux->irq_guard);
425 printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq);
426 return ret;
427 }
428
429 spin_lock_irqsave(&dport->port.lock, flags);
430
431 /* Enable interrupts. */
432 tmp = dz_in(dport, DZ_CSR);
433 tmp |= DZ_RIE | DZ_TIE;
434 dz_out(dport, DZ_CSR, tmp);
435
436 spin_unlock_irqrestore(&dport->port.lock, flags);
437
438 return 0;
439}
440
441/*
442 * -------------------------------------------------------------------
443 * shutdown ()
444 *
445 * This routine will shutdown a serial port; interrupts are disabled, and
446 * DTR is dropped if the hangup on close termio flag is on.
447 * -------------------------------------------------------------------
448 */
449static void dz_shutdown(struct uart_port *uport)
450{
451 struct dz_port *dport = to_dport(uport);
452 struct dz_mux *mux = dport->mux;
453 unsigned long flags;
454 int irq_guard;
455 u16 tmp;
456
457 spin_lock_irqsave(&dport->port.lock, flags);
458 dz_stop_tx(&dport->port);
459 spin_unlock_irqrestore(&dport->port.lock, flags);
460
461 irq_guard = atomic_add_return(-1, &mux->irq_guard);
462 if (!irq_guard) {
463 /* Disable interrupts. */
464 tmp = dz_in(dport, DZ_CSR);
465 tmp &= ~(DZ_RIE | DZ_TIE);
466 dz_out(dport, DZ_CSR, tmp);
467
468 free_irq(dport->port.irq, mux);
469 }
470}
471
472/*
473 * -------------------------------------------------------------------
474 * dz_tx_empty() -- get the transmitter empty status
475 *
476 * Purpose: Let user call ioctl() to get info when the UART physically
477 * is emptied. On bus types like RS485, the transmitter must
478 * release the bus after transmitting. This must be done when
479 * the transmit shift register is empty, not be done when the
480 * transmit holding register is empty. This functionality
481 * allows an RS485 driver to be written in user space.
482 * -------------------------------------------------------------------
483 */
484static unsigned int dz_tx_empty(struct uart_port *uport)
485{
486 struct dz_port *dport = to_dport(uport);
487 unsigned short tmp, mask = 1 << dport->port.line;
488
489 tmp = dz_in(dport, DZ_TCR);
490 tmp &= mask;
491
492 return tmp ? 0 : TIOCSER_TEMT;
493}
494
495static void dz_break_ctl(struct uart_port *uport, int break_state)
496{
497 /*
498 * FIXME: Can't access BREAK bits in TDR easily;
499 * reuse the code for polled TX. --macro
500 */
501 struct dz_port *dport = to_dport(uport);
502 unsigned long flags;
503 unsigned short tmp, mask = 1 << dport->port.line;
504
505 spin_lock_irqsave(&uport->lock, flags);
506 tmp = dz_in(dport, DZ_TCR);
507 if (break_state)
508 tmp |= mask;
509 else
510 tmp &= ~mask;
511 dz_out(dport, DZ_TCR, tmp);
512 spin_unlock_irqrestore(&uport->lock, flags);
513}
514
515static int dz_encode_baud_rate(unsigned int baud)
516{
517 switch (baud) {
518 case 50:
519 return DZ_B50;
520 case 75:
521 return DZ_B75;
522 case 110:
523 return DZ_B110;
524 case 134:
525 return DZ_B134;
526 case 150:
527 return DZ_B150;
528 case 300:
529 return DZ_B300;
530 case 600:
531 return DZ_B600;
532 case 1200:
533 return DZ_B1200;
534 case 1800:
535 return DZ_B1800;
536 case 2000:
537 return DZ_B2000;
538 case 2400:
539 return DZ_B2400;
540 case 3600:
541 return DZ_B3600;
542 case 4800:
543 return DZ_B4800;
544 case 7200:
545 return DZ_B7200;
546 case 9600:
547 return DZ_B9600;
548 default:
549 return -1;
550 }
551}
552
553
554static void dz_reset(struct dz_port *dport)
555{
556 struct dz_mux *mux = dport->mux;
557
558 if (mux->initialised)
559 return;
560
561 dz_out(dport, DZ_CSR, DZ_CLR);
562 while (dz_in(dport, DZ_CSR) & DZ_CLR);
563 iob();
564
565 /* Enable scanning. */
566 dz_out(dport, DZ_CSR, DZ_MSE);
567
568 mux->initialised = 1;
569}
570
571static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
572 struct ktermios *old_termios)
573{
574 struct dz_port *dport = to_dport(uport);
575 unsigned long flags;
576 unsigned int cflag, baud;
577 int bflag;
578
579 cflag = dport->port.line;
580
581 switch (termios->c_cflag & CSIZE) {
582 case CS5:
583 cflag |= DZ_CS5;
584 break;
585 case CS6:
586 cflag |= DZ_CS6;
587 break;
588 case CS7:
589 cflag |= DZ_CS7;
590 break;
591 case CS8:
592 default:
593 cflag |= DZ_CS8;
594 }
595
596 if (termios->c_cflag & CSTOPB)
597 cflag |= DZ_CSTOPB;
598 if (termios->c_cflag & PARENB)
599 cflag |= DZ_PARENB;
600 if (termios->c_cflag & PARODD)
601 cflag |= DZ_PARODD;
602
603 baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
604 bflag = dz_encode_baud_rate(baud);
605 if (bflag < 0) { /* Try to keep unchanged. */
606 baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600);
607 bflag = dz_encode_baud_rate(baud);
608 if (bflag < 0) { /* Resort to 9600. */
609 baud = 9600;
610 bflag = DZ_B9600;
611 }
612 tty_termios_encode_baud_rate(termios, baud, baud);
613 }
614 cflag |= bflag;
615
616 if (termios->c_cflag & CREAD)
617 cflag |= DZ_RXENAB;
618
619 spin_lock_irqsave(&dport->port.lock, flags);
620
621 uart_update_timeout(uport, termios->c_cflag, baud);
622
623 dz_out(dport, DZ_LPR, cflag);
624 dport->cflag = cflag;
625
626 /* setup accept flag */
627 dport->port.read_status_mask = DZ_OERR;
628 if (termios->c_iflag & INPCK)
629 dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
630 if (termios->c_iflag & (BRKINT | PARMRK))
631 dport->port.read_status_mask |= DZ_BREAK;
632
633 /* characters to ignore */
634 uport->ignore_status_mask = 0;
635 if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
636 dport->port.ignore_status_mask |= DZ_OERR;
637 if (termios->c_iflag & IGNPAR)
638 dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR;
639 if (termios->c_iflag & IGNBRK)
640 dport->port.ignore_status_mask |= DZ_BREAK;
641
642 spin_unlock_irqrestore(&dport->port.lock, flags);
643}
644
645/*
646 * Hack alert!
647 * Required solely so that the initial PROM-based console
648 * works undisturbed in parallel with this one.
649 */
650static void dz_pm(struct uart_port *uport, unsigned int state,
651 unsigned int oldstate)
652{
653 struct dz_port *dport = to_dport(uport);
654 unsigned long flags;
655
656 spin_lock_irqsave(&dport->port.lock, flags);
657 if (state < 3)
658 dz_start_tx(&dport->port);
659 else
660 dz_stop_tx(&dport->port);
661 spin_unlock_irqrestore(&dport->port.lock, flags);
662}
663
664
665static const char *dz_type(struct uart_port *uport)
666{
667 return "DZ";
668}
669
670static void dz_release_port(struct uart_port *uport)
671{
672 struct dz_mux *mux = to_dport(uport)->mux;
673 int map_guard;
674
675 iounmap(uport->membase);
676 uport->membase = NULL;
677
678 map_guard = atomic_add_return(-1, &mux->map_guard);
679 if (!map_guard)
680 release_mem_region(uport->mapbase, dec_kn_slot_size);
681}
682
683static int dz_map_port(struct uart_port *uport)
684{
685 if (!uport->membase)
686 uport->membase = ioremap_nocache(uport->mapbase,
687 dec_kn_slot_size);
688 if (!uport->membase) {
689 printk(KERN_ERR "dz: Cannot map MMIO\n");
690 return -ENOMEM;
691 }
692 return 0;
693}
694
695static int dz_request_port(struct uart_port *uport)
696{
697 struct dz_mux *mux = to_dport(uport)->mux;
698 int map_guard;
699 int ret;
700
701 map_guard = atomic_add_return(1, &mux->map_guard);
702 if (map_guard == 1) {
703 if (!request_mem_region(uport->mapbase, dec_kn_slot_size,
704 "dz")) {
705 atomic_add(-1, &mux->map_guard);
706 printk(KERN_ERR
707 "dz: Unable to reserve MMIO resource\n");
708 return -EBUSY;
709 }
710 }
711 ret = dz_map_port(uport);
712 if (ret) {
713 map_guard = atomic_add_return(-1, &mux->map_guard);
714 if (!map_guard)
715 release_mem_region(uport->mapbase, dec_kn_slot_size);
716 return ret;
717 }
718 return 0;
719}
720
721static void dz_config_port(struct uart_port *uport, int flags)
722{
723 struct dz_port *dport = to_dport(uport);
724
725 if (flags & UART_CONFIG_TYPE) {
726 if (dz_request_port(uport))
727 return;
728
729 uport->type = PORT_DZ;
730
731 dz_reset(dport);
732 }
733}
734
735/*
736 * Verify the new serial_struct (for TIOCSSERIAL).
737 */
738static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser)
739{
740 int ret = 0;
741
742 if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ)
743 ret = -EINVAL;
744 if (ser->irq != uport->irq)
745 ret = -EINVAL;
746 return ret;
747}
748
749static struct uart_ops dz_ops = {
750 .tx_empty = dz_tx_empty,
751 .get_mctrl = dz_get_mctrl,
752 .set_mctrl = dz_set_mctrl,
753 .stop_tx = dz_stop_tx,
754 .start_tx = dz_start_tx,
755 .stop_rx = dz_stop_rx,
756 .enable_ms = dz_enable_ms,
757 .break_ctl = dz_break_ctl,
758 .startup = dz_startup,
759 .shutdown = dz_shutdown,
760 .set_termios = dz_set_termios,
761 .pm = dz_pm,
762 .type = dz_type,
763 .release_port = dz_release_port,
764 .request_port = dz_request_port,
765 .config_port = dz_config_port,
766 .verify_port = dz_verify_port,
767};
768
769static void __init dz_init_ports(void)
770{
771 static int first = 1;
772 unsigned long base;
773 int line;
774
775 if (!first)
776 return;
777 first = 0;
778
779 if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100)
780 base = dec_kn_slot_base + KN01_DZ11;
781 else
782 base = dec_kn_slot_base + KN02_DZ11;
783
784 for (line = 0; line < DZ_NB_PORT; line++) {
785 struct dz_port *dport = &dz_mux.dport[line];
786 struct uart_port *uport = &dport->port;
787
788 dport->mux = &dz_mux;
789
790 uport->irq = dec_interrupt[DEC_IRQ_DZ11];
791 uport->fifosize = 1;
792 uport->iotype = UPIO_MEM;
793 uport->flags = UPF_BOOT_AUTOCONF;
794 uport->ops = &dz_ops;
795 uport->line = line;
796 uport->mapbase = base;
797 }
798}
799
800#ifdef CONFIG_SERIAL_DZ_CONSOLE
801/*
802 * -------------------------------------------------------------------
803 * dz_console_putchar() -- transmit a character
804 *
805 * Polled transmission. This is tricky. We need to mask transmit
806 * interrupts so that they do not interfere, enable the transmitter
807 * for the line requested and then wait till the transmit scanner
808 * requests data for this line. But it may request data for another
809 * line first, in which case we have to disable its transmitter and
810 * repeat waiting till our line pops up. Only then the character may
811 * be transmitted. Finally, the state of the transmitter mask is
812 * restored. Welcome to the world of PDP-11!
813 * -------------------------------------------------------------------
814 */
815static void dz_console_putchar(struct uart_port *uport, int ch)
816{
817 struct dz_port *dport = to_dport(uport);
818 unsigned long flags;
819 unsigned short csr, tcr, trdy, mask;
820 int loops = 10000;
821
822 spin_lock_irqsave(&dport->port.lock, flags);
823 csr = dz_in(dport, DZ_CSR);
824 dz_out(dport, DZ_CSR, csr & ~DZ_TIE);
825 tcr = dz_in(dport, DZ_TCR);
826 tcr |= 1 << dport->port.line;
827 mask = tcr;
828 dz_out(dport, DZ_TCR, mask);
829 iob();
830 spin_unlock_irqrestore(&dport->port.lock, flags);
831
832 do {
833 trdy = dz_in(dport, DZ_CSR);
834 if (!(trdy & DZ_TRDY))
835 continue;
836 trdy = (trdy & DZ_TLINE) >> 8;
837 if (trdy == dport->port.line)
838 break;
839 mask &= ~(1 << trdy);
840 dz_out(dport, DZ_TCR, mask);
841 iob();
842 udelay(2);
843 } while (--loops);
844
845 if (loops) /* Cannot send otherwise. */
846 dz_out(dport, DZ_TDR, ch);
847
848 dz_out(dport, DZ_TCR, tcr);
849 dz_out(dport, DZ_CSR, csr);
850}
851
852/*
853 * -------------------------------------------------------------------
854 * dz_console_print ()
855 *
856 * dz_console_print is registered for printk.
857 * The console must be locked when we get here.
858 * -------------------------------------------------------------------
859 */
860static void dz_console_print(struct console *co,
861 const char *str,
862 unsigned int count)
863{
864 struct dz_port *dport = &dz_mux.dport[co->index];
865#ifdef DEBUG_DZ
866 prom_printf((char *) str);
867#endif
868 uart_console_write(&dport->port, str, count, dz_console_putchar);
869}
870
871static int __init dz_console_setup(struct console *co, char *options)
872{
873 struct dz_port *dport = &dz_mux.dport[co->index];
874 struct uart_port *uport = &dport->port;
875 int baud = 9600;
876 int bits = 8;
877 int parity = 'n';
878 int flow = 'n';
879 int ret;
880
881 ret = dz_map_port(uport);
882 if (ret)
883 return ret;
884
885 spin_lock_init(&dport->port.lock); /* For dz_pm(). */
886
887 dz_reset(dport);
888 dz_pm(uport, 0, -1);
889
890 if (options)
891 uart_parse_options(options, &baud, &parity, &bits, &flow);
892
893 return uart_set_options(&dport->port, co, baud, parity, bits, flow);
894}
895
896static struct uart_driver dz_reg;
897static struct console dz_console = {
898 .name = "ttyS",
899 .write = dz_console_print,
900 .device = uart_console_device,
901 .setup = dz_console_setup,
902 .flags = CON_PRINTBUFFER,
903 .index = -1,
904 .data = &dz_reg,
905};
906
907static int __init dz_serial_console_init(void)
908{
909 if (!IOASIC) {
910 dz_init_ports();
911 register_console(&dz_console);
912 return 0;
913 } else
914 return -ENXIO;
915}
916
917console_initcall(dz_serial_console_init);
918
919#define SERIAL_DZ_CONSOLE &dz_console
920#else
921#define SERIAL_DZ_CONSOLE NULL
922#endif /* CONFIG_SERIAL_DZ_CONSOLE */
923
924static struct uart_driver dz_reg = {
925 .owner = THIS_MODULE,
926 .driver_name = "serial",
927 .dev_name = "ttyS",
928 .major = TTY_MAJOR,
929 .minor = 64,
930 .nr = DZ_NB_PORT,
931 .cons = SERIAL_DZ_CONSOLE,
932};
933
934static int __init dz_init(void)
935{
936 int ret, i;
937
938 if (IOASIC)
939 return -ENXIO;
940
941 printk("%s%s\n", dz_name, dz_version);
942
943 dz_init_ports();
944
945 ret = uart_register_driver(&dz_reg);
946 if (ret)
947 return ret;
948
949 for (i = 0; i < DZ_NB_PORT; i++)
950 uart_add_one_port(&dz_reg, &dz_mux.dport[i].port);
951
952 return 0;
953}
954
955module_init(dz_init);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * dz.c: Serial port driver for DECstations equipped
4 * with the DZ chipset.
5 *
6 * Copyright (C) 1998 Olivier A. D. Lebaillif
7 *
8 * Email: olivier.lebaillif@ifrsys.com
9 *
10 * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki
11 *
12 * [31-AUG-98] triemer
13 * Changed IRQ to use Harald's dec internals interrupts.h
14 * removed base_addr code - moving address assignment to setup.c
15 * Changed name of dz_init to rs_init to be consistent with tc code
16 * [13-NOV-98] triemer fixed code to receive characters
17 * after patches by harald to irq code.
18 * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
19 * field from "current" - somewhere between 2.1.121 and 2.1.131
20 Qua Jun 27 15:02:26 BRT 2001
21 * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
22 *
23 * Parts (C) 1999 David Airlie, airlied@linux.ie
24 * [07-SEP-99] Bugfixes
25 *
26 * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
27 * Converted to new serial core
28 */
29
30#undef DEBUG_DZ
31
32#include <linux/bitops.h>
33#include <linux/compiler.h>
34#include <linux/console.h>
35#include <linux/delay.h>
36#include <linux/errno.h>
37#include <linux/init.h>
38#include <linux/interrupt.h>
39#include <linux/ioport.h>
40#include <linux/kernel.h>
41#include <linux/major.h>
42#include <linux/module.h>
43#include <linux/serial.h>
44#include <linux/serial_core.h>
45#include <linux/sysrq.h>
46#include <linux/tty.h>
47#include <linux/tty_flip.h>
48
49#include <linux/atomic.h>
50#include <linux/io.h>
51#include <asm/bootinfo.h>
52
53#include <asm/dec/interrupts.h>
54#include <asm/dec/kn01.h>
55#include <asm/dec/kn02.h>
56#include <asm/dec/machtype.h>
57#include <asm/dec/prom.h>
58#include <asm/dec/system.h>
59
60#include "dz.h"
61
62
63MODULE_DESCRIPTION("DECstation DZ serial driver");
64MODULE_LICENSE("GPL");
65
66
67static char dz_name[] __initdata = "DECstation DZ serial driver version ";
68static char dz_version[] __initdata = "1.04";
69
70struct dz_port {
71 struct dz_mux *mux;
72 struct uart_port port;
73 unsigned int cflag;
74};
75
76struct dz_mux {
77 struct dz_port dport[DZ_NB_PORT];
78 atomic_t map_guard;
79 atomic_t irq_guard;
80 int initialised;
81};
82
83static struct dz_mux dz_mux;
84
85static inline struct dz_port *to_dport(struct uart_port *uport)
86{
87 return container_of(uport, struct dz_port, port);
88}
89
90/*
91 * ------------------------------------------------------------
92 * dz_in () and dz_out ()
93 *
94 * These routines are used to access the registers of the DZ
95 * chip, hiding relocation differences between implementation.
96 * ------------------------------------------------------------
97 */
98
99static u16 dz_in(struct dz_port *dport, unsigned offset)
100{
101 void __iomem *addr = dport->port.membase + offset;
102
103 return readw(addr);
104}
105
106static void dz_out(struct dz_port *dport, unsigned offset, u16 value)
107{
108 void __iomem *addr = dport->port.membase + offset;
109
110 writew(value, addr);
111}
112
113/*
114 * ------------------------------------------------------------
115 * rs_stop () and rs_start ()
116 *
117 * These routines are called before setting or resetting
118 * tty->flow.stopped. They enable or disable transmitter interrupts,
119 * as necessary.
120 * ------------------------------------------------------------
121 */
122
123static void dz_stop_tx(struct uart_port *uport)
124{
125 struct dz_port *dport = to_dport(uport);
126 u16 tmp, mask = 1 << dport->port.line;
127
128 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
129 tmp &= ~mask; /* clear the TX flag */
130 dz_out(dport, DZ_TCR, tmp);
131}
132
133static void dz_start_tx(struct uart_port *uport)
134{
135 struct dz_port *dport = to_dport(uport);
136 u16 tmp, mask = 1 << dport->port.line;
137
138 tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
139 tmp |= mask; /* set the TX flag */
140 dz_out(dport, DZ_TCR, tmp);
141}
142
143static void dz_stop_rx(struct uart_port *uport)
144{
145 struct dz_port *dport = to_dport(uport);
146
147 dport->cflag &= ~DZ_RXENAB;
148 dz_out(dport, DZ_LPR, dport->cflag);
149}
150
151/*
152 * ------------------------------------------------------------
153 *
154 * Here start the interrupt handling routines. All of the following
155 * subroutines are declared as inline and are folded into
156 * dz_interrupt. They were separated out for readability's sake.
157 *
158 * Note: dz_interrupt() is a "fast" interrupt, which means that it
159 * runs with interrupts turned off. People who may want to modify
160 * dz_interrupt() should try to keep the interrupt handler as fast as
161 * possible. After you are done making modifications, it is not a bad
162 * idea to do:
163 *
164 * make drivers/serial/dz.s
165 *
166 * and look at the resulting assemble code in dz.s.
167 *
168 * ------------------------------------------------------------
169 */
170
171/*
172 * ------------------------------------------------------------
173 * receive_char ()
174 *
175 * This routine deals with inputs from any lines.
176 * ------------------------------------------------------------
177 */
178static inline void dz_receive_chars(struct dz_mux *mux)
179{
180 struct uart_port *uport;
181 struct dz_port *dport = &mux->dport[0];
182 struct uart_icount *icount;
183 int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
184 u16 status;
185 u8 ch, flag;
186 int i;
187
188 while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
189 dport = &mux->dport[LINE(status)];
190 uport = &dport->port;
191
192 ch = UCHAR(status); /* grab the char */
193 flag = TTY_NORMAL;
194
195 icount = &uport->icount;
196 icount->rx++;
197
198 if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) {
199
200 /*
201 * There is no separate BREAK status bit, so treat
202 * null characters with framing errors as BREAKs;
203 * normally, otherwise. For this move the Framing
204 * Error bit to a simulated BREAK bit.
205 */
206 if (!ch) {
207 status |= (status & DZ_FERR) >>
208 (ffs(DZ_FERR) - ffs(DZ_BREAK));
209 status &= ~DZ_FERR;
210 }
211
212 /* Handle SysRq/SAK & keep track of the statistics. */
213 if (status & DZ_BREAK) {
214 icount->brk++;
215 if (uart_handle_break(uport))
216 continue;
217 } else if (status & DZ_FERR)
218 icount->frame++;
219 else if (status & DZ_PERR)
220 icount->parity++;
221 if (status & DZ_OERR)
222 icount->overrun++;
223
224 status &= uport->read_status_mask;
225 if (status & DZ_BREAK)
226 flag = TTY_BREAK;
227 else if (status & DZ_FERR)
228 flag = TTY_FRAME;
229 else if (status & DZ_PERR)
230 flag = TTY_PARITY;
231
232 }
233
234 if (uart_handle_sysrq_char(uport, ch))
235 continue;
236
237 uart_insert_char(uport, status, DZ_OERR, ch, flag);
238 lines_rx[LINE(status)] = 1;
239 }
240 for (i = 0; i < DZ_NB_PORT; i++)
241 if (lines_rx[i])
242 tty_flip_buffer_push(&mux->dport[i].port.state->port);
243}
244
245/*
246 * ------------------------------------------------------------
247 * transmit_char ()
248 *
249 * This routine deals with outputs to any lines.
250 * ------------------------------------------------------------
251 */
252static inline void dz_transmit_chars(struct dz_mux *mux)
253{
254 struct dz_port *dport = &mux->dport[0];
255 struct tty_port *tport;
256 unsigned char tmp;
257 u16 status;
258
259 status = dz_in(dport, DZ_CSR);
260 dport = &mux->dport[LINE(status)];
261 tport = &dport->port.state->port;
262
263 if (dport->port.x_char) { /* XON/XOFF chars */
264 dz_out(dport, DZ_TDR, dport->port.x_char);
265 dport->port.icount.tx++;
266 dport->port.x_char = 0;
267 return;
268 }
269 /* If nothing to do or stopped or hardware stopped. */
270 if (uart_tx_stopped(&dport->port) ||
271 !uart_fifo_get(&dport->port, &tmp)) {
272 uart_port_lock(&dport->port);
273 dz_stop_tx(&dport->port);
274 uart_port_unlock(&dport->port);
275 return;
276 }
277
278 /*
279 * If something to do... (remember the dz has no output fifo,
280 * so we go one char at a time) :-<
281 */
282 dz_out(dport, DZ_TDR, tmp);
283
284 if (kfifo_len(&tport->xmit_fifo) < DZ_WAKEUP_CHARS)
285 uart_write_wakeup(&dport->port);
286
287 /* Are we are done. */
288 if (kfifo_is_empty(&tport->xmit_fifo)) {
289 uart_port_lock(&dport->port);
290 dz_stop_tx(&dport->port);
291 uart_port_unlock(&dport->port);
292 }
293}
294
295/*
296 * ------------------------------------------------------------
297 * check_modem_status()
298 *
299 * DS 3100 & 5100: Only valid for the MODEM line, duh!
300 * DS 5000/200: Valid for the MODEM and PRINTER line.
301 * ------------------------------------------------------------
302 */
303static inline void check_modem_status(struct dz_port *dport)
304{
305 /*
306 * FIXME:
307 * 1. No status change interrupt; use a timer.
308 * 2. Handle the 3100/5000 as appropriate. --macro
309 */
310 u16 status;
311
312 /* If not the modem line just return. */
313 if (dport->port.line != DZ_MODEM)
314 return;
315
316 status = dz_in(dport, DZ_MSR);
317
318 /* it's easy, since DSR2 is the only bit in the register */
319 if (status)
320 dport->port.icount.dsr++;
321}
322
323/*
324 * ------------------------------------------------------------
325 * dz_interrupt ()
326 *
327 * this is the main interrupt routine for the DZ chip.
328 * It deals with the multiple ports.
329 * ------------------------------------------------------------
330 */
331static irqreturn_t dz_interrupt(int irq, void *dev_id)
332{
333 struct dz_mux *mux = dev_id;
334 struct dz_port *dport = &mux->dport[0];
335 u16 status;
336
337 /* get the reason why we just got an irq */
338 status = dz_in(dport, DZ_CSR);
339
340 if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE))
341 dz_receive_chars(mux);
342
343 if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE))
344 dz_transmit_chars(mux);
345
346 return IRQ_HANDLED;
347}
348
349/*
350 * -------------------------------------------------------------------
351 * Here ends the DZ interrupt routines.
352 * -------------------------------------------------------------------
353 */
354
355static unsigned int dz_get_mctrl(struct uart_port *uport)
356{
357 /*
358 * FIXME: Handle the 3100/5000 as appropriate. --macro
359 */
360 struct dz_port *dport = to_dport(uport);
361 unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
362
363 if (dport->port.line == DZ_MODEM) {
364 if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR)
365 mctrl &= ~TIOCM_DSR;
366 }
367
368 return mctrl;
369}
370
371static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
372{
373 /*
374 * FIXME: Handle the 3100/5000 as appropriate. --macro
375 */
376 struct dz_port *dport = to_dport(uport);
377 u16 tmp;
378
379 if (dport->port.line == DZ_MODEM) {
380 tmp = dz_in(dport, DZ_TCR);
381 if (mctrl & TIOCM_DTR)
382 tmp &= ~DZ_MODEM_DTR;
383 else
384 tmp |= DZ_MODEM_DTR;
385 dz_out(dport, DZ_TCR, tmp);
386 }
387}
388
389/*
390 * -------------------------------------------------------------------
391 * startup ()
392 *
393 * various initialization tasks
394 * -------------------------------------------------------------------
395 */
396static int dz_startup(struct uart_port *uport)
397{
398 struct dz_port *dport = to_dport(uport);
399 struct dz_mux *mux = dport->mux;
400 unsigned long flags;
401 int irq_guard;
402 int ret;
403 u16 tmp;
404
405 irq_guard = atomic_add_return(1, &mux->irq_guard);
406 if (irq_guard != 1)
407 return 0;
408
409 ret = request_irq(dport->port.irq, dz_interrupt,
410 IRQF_SHARED, "dz", mux);
411 if (ret) {
412 atomic_add(-1, &mux->irq_guard);
413 printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq);
414 return ret;
415 }
416
417 uart_port_lock_irqsave(&dport->port, &flags);
418
419 /* Enable interrupts. */
420 tmp = dz_in(dport, DZ_CSR);
421 tmp |= DZ_RIE | DZ_TIE;
422 dz_out(dport, DZ_CSR, tmp);
423
424 uart_port_unlock_irqrestore(&dport->port, flags);
425
426 return 0;
427}
428
429/*
430 * -------------------------------------------------------------------
431 * shutdown ()
432 *
433 * This routine will shutdown a serial port; interrupts are disabled, and
434 * DTR is dropped if the hangup on close termio flag is on.
435 * -------------------------------------------------------------------
436 */
437static void dz_shutdown(struct uart_port *uport)
438{
439 struct dz_port *dport = to_dport(uport);
440 struct dz_mux *mux = dport->mux;
441 unsigned long flags;
442 int irq_guard;
443 u16 tmp;
444
445 uart_port_lock_irqsave(&dport->port, &flags);
446 dz_stop_tx(&dport->port);
447 uart_port_unlock_irqrestore(&dport->port, flags);
448
449 irq_guard = atomic_add_return(-1, &mux->irq_guard);
450 if (!irq_guard) {
451 /* Disable interrupts. */
452 tmp = dz_in(dport, DZ_CSR);
453 tmp &= ~(DZ_RIE | DZ_TIE);
454 dz_out(dport, DZ_CSR, tmp);
455
456 free_irq(dport->port.irq, mux);
457 }
458}
459
460/*
461 * -------------------------------------------------------------------
462 * dz_tx_empty() -- get the transmitter empty status
463 *
464 * Purpose: Let user call ioctl() to get info when the UART physically
465 * is emptied. On bus types like RS485, the transmitter must
466 * release the bus after transmitting. This must be done when
467 * the transmit shift register is empty, not be done when the
468 * transmit holding register is empty. This functionality
469 * allows an RS485 driver to be written in user space.
470 * -------------------------------------------------------------------
471 */
472static unsigned int dz_tx_empty(struct uart_port *uport)
473{
474 struct dz_port *dport = to_dport(uport);
475 unsigned short tmp, mask = 1 << dport->port.line;
476
477 tmp = dz_in(dport, DZ_TCR);
478 tmp &= mask;
479
480 return tmp ? 0 : TIOCSER_TEMT;
481}
482
483static void dz_break_ctl(struct uart_port *uport, int break_state)
484{
485 /*
486 * FIXME: Can't access BREAK bits in TDR easily;
487 * reuse the code for polled TX. --macro
488 */
489 struct dz_port *dport = to_dport(uport);
490 unsigned long flags;
491 unsigned short tmp, mask = 1 << dport->port.line;
492
493 uart_port_lock_irqsave(uport, &flags);
494 tmp = dz_in(dport, DZ_TCR);
495 if (break_state)
496 tmp |= mask;
497 else
498 tmp &= ~mask;
499 dz_out(dport, DZ_TCR, tmp);
500 uart_port_unlock_irqrestore(uport, flags);
501}
502
503static int dz_encode_baud_rate(unsigned int baud)
504{
505 switch (baud) {
506 case 50:
507 return DZ_B50;
508 case 75:
509 return DZ_B75;
510 case 110:
511 return DZ_B110;
512 case 134:
513 return DZ_B134;
514 case 150:
515 return DZ_B150;
516 case 300:
517 return DZ_B300;
518 case 600:
519 return DZ_B600;
520 case 1200:
521 return DZ_B1200;
522 case 1800:
523 return DZ_B1800;
524 case 2000:
525 return DZ_B2000;
526 case 2400:
527 return DZ_B2400;
528 case 3600:
529 return DZ_B3600;
530 case 4800:
531 return DZ_B4800;
532 case 7200:
533 return DZ_B7200;
534 case 9600:
535 return DZ_B9600;
536 default:
537 return -1;
538 }
539}
540
541
542static void dz_reset(struct dz_port *dport)
543{
544 struct dz_mux *mux = dport->mux;
545
546 if (mux->initialised)
547 return;
548
549 dz_out(dport, DZ_CSR, DZ_CLR);
550 while (dz_in(dport, DZ_CSR) & DZ_CLR);
551 iob();
552
553 /* Enable scanning. */
554 dz_out(dport, DZ_CSR, DZ_MSE);
555
556 mux->initialised = 1;
557}
558
559static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
560 const struct ktermios *old_termios)
561{
562 struct dz_port *dport = to_dport(uport);
563 unsigned long flags;
564 unsigned int cflag, baud;
565 int bflag;
566
567 cflag = dport->port.line;
568
569 switch (termios->c_cflag & CSIZE) {
570 case CS5:
571 cflag |= DZ_CS5;
572 break;
573 case CS6:
574 cflag |= DZ_CS6;
575 break;
576 case CS7:
577 cflag |= DZ_CS7;
578 break;
579 case CS8:
580 default:
581 cflag |= DZ_CS8;
582 }
583
584 if (termios->c_cflag & CSTOPB)
585 cflag |= DZ_CSTOPB;
586 if (termios->c_cflag & PARENB)
587 cflag |= DZ_PARENB;
588 if (termios->c_cflag & PARODD)
589 cflag |= DZ_PARODD;
590
591 baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
592 bflag = dz_encode_baud_rate(baud);
593 if (bflag < 0) {
594 if (old_termios) {
595 /* Keep unchanged. */
596 baud = tty_termios_baud_rate(old_termios);
597 bflag = dz_encode_baud_rate(baud);
598 }
599 if (bflag < 0) { /* Resort to 9600. */
600 baud = 9600;
601 bflag = DZ_B9600;
602 }
603 tty_termios_encode_baud_rate(termios, baud, baud);
604 }
605 cflag |= bflag;
606
607 if (termios->c_cflag & CREAD)
608 cflag |= DZ_RXENAB;
609
610 uart_port_lock_irqsave(&dport->port, &flags);
611
612 uart_update_timeout(uport, termios->c_cflag, baud);
613
614 dz_out(dport, DZ_LPR, cflag);
615 dport->cflag = cflag;
616
617 /* setup accept flag */
618 dport->port.read_status_mask = DZ_OERR;
619 if (termios->c_iflag & INPCK)
620 dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
621 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
622 dport->port.read_status_mask |= DZ_BREAK;
623
624 /* characters to ignore */
625 uport->ignore_status_mask = 0;
626 if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
627 dport->port.ignore_status_mask |= DZ_OERR;
628 if (termios->c_iflag & IGNPAR)
629 dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR;
630 if (termios->c_iflag & IGNBRK)
631 dport->port.ignore_status_mask |= DZ_BREAK;
632
633 uart_port_unlock_irqrestore(&dport->port, flags);
634}
635
636/*
637 * Hack alert!
638 * Required solely so that the initial PROM-based console
639 * works undisturbed in parallel with this one.
640 */
641static void dz_pm(struct uart_port *uport, unsigned int state,
642 unsigned int oldstate)
643{
644 struct dz_port *dport = to_dport(uport);
645 unsigned long flags;
646
647 uart_port_lock_irqsave(&dport->port, &flags);
648 if (state < 3)
649 dz_start_tx(&dport->port);
650 else
651 dz_stop_tx(&dport->port);
652 uart_port_unlock_irqrestore(&dport->port, flags);
653}
654
655
656static const char *dz_type(struct uart_port *uport)
657{
658 return "DZ";
659}
660
661static void dz_release_port(struct uart_port *uport)
662{
663 struct dz_mux *mux = to_dport(uport)->mux;
664 int map_guard;
665
666 iounmap(uport->membase);
667 uport->membase = NULL;
668
669 map_guard = atomic_add_return(-1, &mux->map_guard);
670 if (!map_guard)
671 release_mem_region(uport->mapbase, dec_kn_slot_size);
672}
673
674static int dz_map_port(struct uart_port *uport)
675{
676 if (!uport->membase)
677 uport->membase = ioremap(uport->mapbase,
678 dec_kn_slot_size);
679 if (!uport->membase) {
680 printk(KERN_ERR "dz: Cannot map MMIO\n");
681 return -ENOMEM;
682 }
683 return 0;
684}
685
686static int dz_request_port(struct uart_port *uport)
687{
688 struct dz_mux *mux = to_dport(uport)->mux;
689 int map_guard;
690 int ret;
691
692 map_guard = atomic_add_return(1, &mux->map_guard);
693 if (map_guard == 1) {
694 if (!request_mem_region(uport->mapbase, dec_kn_slot_size,
695 "dz")) {
696 atomic_add(-1, &mux->map_guard);
697 printk(KERN_ERR
698 "dz: Unable to reserve MMIO resource\n");
699 return -EBUSY;
700 }
701 }
702 ret = dz_map_port(uport);
703 if (ret) {
704 map_guard = atomic_add_return(-1, &mux->map_guard);
705 if (!map_guard)
706 release_mem_region(uport->mapbase, dec_kn_slot_size);
707 return ret;
708 }
709 return 0;
710}
711
712static void dz_config_port(struct uart_port *uport, int flags)
713{
714 struct dz_port *dport = to_dport(uport);
715
716 if (flags & UART_CONFIG_TYPE) {
717 if (dz_request_port(uport))
718 return;
719
720 uport->type = PORT_DZ;
721
722 dz_reset(dport);
723 }
724}
725
726/*
727 * Verify the new serial_struct (for TIOCSSERIAL).
728 */
729static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser)
730{
731 int ret = 0;
732
733 if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ)
734 ret = -EINVAL;
735 if (ser->irq != uport->irq)
736 ret = -EINVAL;
737 return ret;
738}
739
740static const struct uart_ops dz_ops = {
741 .tx_empty = dz_tx_empty,
742 .get_mctrl = dz_get_mctrl,
743 .set_mctrl = dz_set_mctrl,
744 .stop_tx = dz_stop_tx,
745 .start_tx = dz_start_tx,
746 .stop_rx = dz_stop_rx,
747 .break_ctl = dz_break_ctl,
748 .startup = dz_startup,
749 .shutdown = dz_shutdown,
750 .set_termios = dz_set_termios,
751 .pm = dz_pm,
752 .type = dz_type,
753 .release_port = dz_release_port,
754 .request_port = dz_request_port,
755 .config_port = dz_config_port,
756 .verify_port = dz_verify_port,
757};
758
759static void __init dz_init_ports(void)
760{
761 static int first = 1;
762 unsigned long base;
763 int line;
764
765 if (!first)
766 return;
767 first = 0;
768
769 if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100)
770 base = dec_kn_slot_base + KN01_DZ11;
771 else
772 base = dec_kn_slot_base + KN02_DZ11;
773
774 for (line = 0; line < DZ_NB_PORT; line++) {
775 struct dz_port *dport = &dz_mux.dport[line];
776 struct uart_port *uport = &dport->port;
777
778 dport->mux = &dz_mux;
779
780 uport->irq = dec_interrupt[DEC_IRQ_DZ11];
781 uport->fifosize = 1;
782 uport->iotype = UPIO_MEM;
783 uport->flags = UPF_BOOT_AUTOCONF;
784 uport->ops = &dz_ops;
785 uport->line = line;
786 uport->mapbase = base;
787 uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_DZ_CONSOLE);
788 }
789}
790
791#ifdef CONFIG_SERIAL_DZ_CONSOLE
792/*
793 * -------------------------------------------------------------------
794 * dz_console_putchar() -- transmit a character
795 *
796 * Polled transmission. This is tricky. We need to mask transmit
797 * interrupts so that they do not interfere, enable the transmitter
798 * for the line requested and then wait till the transmit scanner
799 * requests data for this line. But it may request data for another
800 * line first, in which case we have to disable its transmitter and
801 * repeat waiting till our line pops up. Only then the character may
802 * be transmitted. Finally, the state of the transmitter mask is
803 * restored. Welcome to the world of PDP-11!
804 * -------------------------------------------------------------------
805 */
806static void dz_console_putchar(struct uart_port *uport, unsigned char ch)
807{
808 struct dz_port *dport = to_dport(uport);
809 unsigned long flags;
810 unsigned short csr, tcr, trdy, mask;
811 int loops = 10000;
812
813 uart_port_lock_irqsave(&dport->port, &flags);
814 csr = dz_in(dport, DZ_CSR);
815 dz_out(dport, DZ_CSR, csr & ~DZ_TIE);
816 tcr = dz_in(dport, DZ_TCR);
817 tcr |= 1 << dport->port.line;
818 mask = tcr;
819 dz_out(dport, DZ_TCR, mask);
820 iob();
821 uart_port_unlock_irqrestore(&dport->port, flags);
822
823 do {
824 trdy = dz_in(dport, DZ_CSR);
825 if (!(trdy & DZ_TRDY))
826 continue;
827 trdy = (trdy & DZ_TLINE) >> 8;
828 if (trdy == dport->port.line)
829 break;
830 mask &= ~(1 << trdy);
831 dz_out(dport, DZ_TCR, mask);
832 iob();
833 udelay(2);
834 } while (--loops);
835
836 if (loops) /* Cannot send otherwise. */
837 dz_out(dport, DZ_TDR, ch);
838
839 dz_out(dport, DZ_TCR, tcr);
840 dz_out(dport, DZ_CSR, csr);
841}
842
843/*
844 * -------------------------------------------------------------------
845 * dz_console_print ()
846 *
847 * dz_console_print is registered for printk.
848 * The console must be locked when we get here.
849 * -------------------------------------------------------------------
850 */
851static void dz_console_print(struct console *co,
852 const char *str,
853 unsigned int count)
854{
855 struct dz_port *dport = &dz_mux.dport[co->index];
856#ifdef DEBUG_DZ
857 prom_printf((char *) str);
858#endif
859 uart_console_write(&dport->port, str, count, dz_console_putchar);
860}
861
862static int __init dz_console_setup(struct console *co, char *options)
863{
864 struct dz_port *dport = &dz_mux.dport[co->index];
865 struct uart_port *uport = &dport->port;
866 int baud = 9600;
867 int bits = 8;
868 int parity = 'n';
869 int flow = 'n';
870 int ret;
871
872 ret = dz_map_port(uport);
873 if (ret)
874 return ret;
875
876 spin_lock_init(&dport->port.lock); /* For dz_pm(). */
877
878 dz_reset(dport);
879 dz_pm(uport, 0, -1);
880
881 if (options)
882 uart_parse_options(options, &baud, &parity, &bits, &flow);
883
884 return uart_set_options(&dport->port, co, baud, parity, bits, flow);
885}
886
887static struct uart_driver dz_reg;
888static struct console dz_console = {
889 .name = "ttyS",
890 .write = dz_console_print,
891 .device = uart_console_device,
892 .setup = dz_console_setup,
893 .flags = CON_PRINTBUFFER,
894 .index = -1,
895 .data = &dz_reg,
896};
897
898static int __init dz_serial_console_init(void)
899{
900 if (!IOASIC) {
901 dz_init_ports();
902 register_console(&dz_console);
903 return 0;
904 } else
905 return -ENXIO;
906}
907
908console_initcall(dz_serial_console_init);
909
910#define SERIAL_DZ_CONSOLE &dz_console
911#else
912#define SERIAL_DZ_CONSOLE NULL
913#endif /* CONFIG_SERIAL_DZ_CONSOLE */
914
915static struct uart_driver dz_reg = {
916 .owner = THIS_MODULE,
917 .driver_name = "serial",
918 .dev_name = "ttyS",
919 .major = TTY_MAJOR,
920 .minor = 64,
921 .nr = DZ_NB_PORT,
922 .cons = SERIAL_DZ_CONSOLE,
923};
924
925static int __init dz_init(void)
926{
927 int ret, i;
928
929 if (IOASIC)
930 return -ENXIO;
931
932 printk("%s%s\n", dz_name, dz_version);
933
934 dz_init_ports();
935
936 ret = uart_register_driver(&dz_reg);
937 if (ret)
938 return ret;
939
940 for (i = 0; i < DZ_NB_PORT; i++)
941 uart_add_one_port(&dz_reg, &dz_mux.dport[i].port);
942
943 return 0;
944}
945
946module_init(dz_init);