Loading...
1/*
2 * Copyright (C) 2005-2006 Dell Inc.
3 * Released under GPL v2.
4 *
5 * Serial Attached SCSI (SAS) transport class.
6 *
7 * The SAS transport class contains common code to deal with SAS HBAs,
8 * an aproximated representation of SAS topologies in the driver model,
9 * and various sysfs attributes to expose these topologies and management
10 * interfaces to userspace.
11 *
12 * In addition to the basic SCSI core objects this transport class
13 * introduces two additional intermediate objects: The SAS PHY
14 * as represented by struct sas_phy defines an "outgoing" PHY on
15 * a SAS HBA or Expander, and the SAS remote PHY represented by
16 * struct sas_rphy defines an "incoming" PHY on a SAS Expander or
17 * end device. Note that this is purely a software concept, the
18 * underlying hardware for a PHY and a remote PHY is the exactly
19 * the same.
20 *
21 * There is no concept of a SAS port in this code, users can see
22 * what PHYs form a wide port based on the port_identifier attribute,
23 * which is the same for all PHYs in a port.
24 */
25
26#include <linux/init.h>
27#include <linux/module.h>
28#include <linux/jiffies.h>
29#include <linux/err.h>
30#include <linux/slab.h>
31#include <linux/string.h>
32#include <linux/blkdev.h>
33#include <linux/bsg.h>
34
35#include <scsi/scsi.h>
36#include <scsi/scsi_device.h>
37#include <scsi/scsi_host.h>
38#include <scsi/scsi_transport.h>
39#include <scsi/scsi_transport_sas.h>
40
41#include "scsi_sas_internal.h"
42struct sas_host_attrs {
43 struct list_head rphy_list;
44 struct mutex lock;
45 struct request_queue *q;
46 u32 next_target_id;
47 u32 next_expander_id;
48 int next_port_id;
49};
50#define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data)
51
52
53/*
54 * Hack to allow attributes of the same name in different objects.
55 */
56#define SAS_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \
57 struct device_attribute dev_attr_##_prefix##_##_name = \
58 __ATTR(_name,_mode,_show,_store)
59
60
61/*
62 * Pretty printing helpers
63 */
64
65#define sas_bitfield_name_match(title, table) \
66static ssize_t \
67get_sas_##title##_names(u32 table_key, char *buf) \
68{ \
69 char *prefix = ""; \
70 ssize_t len = 0; \
71 int i; \
72 \
73 for (i = 0; i < ARRAY_SIZE(table); i++) { \
74 if (table[i].value & table_key) { \
75 len += sprintf(buf + len, "%s%s", \
76 prefix, table[i].name); \
77 prefix = ", "; \
78 } \
79 } \
80 len += sprintf(buf + len, "\n"); \
81 return len; \
82}
83
84#define sas_bitfield_name_set(title, table) \
85static ssize_t \
86set_sas_##title##_names(u32 *table_key, const char *buf) \
87{ \
88 ssize_t len = 0; \
89 int i; \
90 \
91 for (i = 0; i < ARRAY_SIZE(table); i++) { \
92 len = strlen(table[i].name); \
93 if (strncmp(buf, table[i].name, len) == 0 && \
94 (buf[len] == '\n' || buf[len] == '\0')) { \
95 *table_key = table[i].value; \
96 return 0; \
97 } \
98 } \
99 return -EINVAL; \
100}
101
102#define sas_bitfield_name_search(title, table) \
103static ssize_t \
104get_sas_##title##_names(u32 table_key, char *buf) \
105{ \
106 ssize_t len = 0; \
107 int i; \
108 \
109 for (i = 0; i < ARRAY_SIZE(table); i++) { \
110 if (table[i].value == table_key) { \
111 len += sprintf(buf + len, "%s", \
112 table[i].name); \
113 break; \
114 } \
115 } \
116 len += sprintf(buf + len, "\n"); \
117 return len; \
118}
119
120static struct {
121 u32 value;
122 char *name;
123} sas_device_type_names[] = {
124 { SAS_PHY_UNUSED, "unused" },
125 { SAS_END_DEVICE, "end device" },
126 { SAS_EDGE_EXPANDER_DEVICE, "edge expander" },
127 { SAS_FANOUT_EXPANDER_DEVICE, "fanout expander" },
128};
129sas_bitfield_name_search(device_type, sas_device_type_names)
130
131
132static struct {
133 u32 value;
134 char *name;
135} sas_protocol_names[] = {
136 { SAS_PROTOCOL_SATA, "sata" },
137 { SAS_PROTOCOL_SMP, "smp" },
138 { SAS_PROTOCOL_STP, "stp" },
139 { SAS_PROTOCOL_SSP, "ssp" },
140};
141sas_bitfield_name_match(protocol, sas_protocol_names)
142
143static struct {
144 u32 value;
145 char *name;
146} sas_linkspeed_names[] = {
147 { SAS_LINK_RATE_UNKNOWN, "Unknown" },
148 { SAS_PHY_DISABLED, "Phy disabled" },
149 { SAS_LINK_RATE_FAILED, "Link Rate failed" },
150 { SAS_SATA_SPINUP_HOLD, "Spin-up hold" },
151 { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" },
152 { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" },
153 { SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" },
154};
155sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
156sas_bitfield_name_set(linkspeed, sas_linkspeed_names)
157
158static struct sas_end_device *sas_sdev_to_rdev(struct scsi_device *sdev)
159{
160 struct sas_rphy *rphy = target_to_rphy(sdev->sdev_target);
161 struct sas_end_device *rdev;
162
163 BUG_ON(rphy->identify.device_type != SAS_END_DEVICE);
164
165 rdev = rphy_to_end_device(rphy);
166 return rdev;
167}
168
169static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost,
170 struct sas_rphy *rphy)
171{
172 struct request *req;
173 int ret;
174 int (*handler)(struct Scsi_Host *, struct sas_rphy *, struct request *);
175
176 while ((req = blk_fetch_request(q)) != NULL) {
177 spin_unlock_irq(q->queue_lock);
178
179 handler = to_sas_internal(shost->transportt)->f->smp_handler;
180 ret = handler(shost, rphy, req);
181 req->errors = ret;
182
183 blk_end_request_all(req, ret);
184
185 spin_lock_irq(q->queue_lock);
186 }
187}
188
189static void sas_host_smp_request(struct request_queue *q)
190{
191 sas_smp_request(q, (struct Scsi_Host *)q->queuedata, NULL);
192}
193
194static void sas_non_host_smp_request(struct request_queue *q)
195{
196 struct sas_rphy *rphy = q->queuedata;
197 sas_smp_request(q, rphy_to_shost(rphy), rphy);
198}
199
200static void sas_host_release(struct device *dev)
201{
202 struct Scsi_Host *shost = dev_to_shost(dev);
203 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
204 struct request_queue *q = sas_host->q;
205
206 if (q)
207 blk_cleanup_queue(q);
208}
209
210static int sas_bsg_initialize(struct Scsi_Host *shost, struct sas_rphy *rphy)
211{
212 struct request_queue *q;
213 int error;
214 struct device *dev;
215 char namebuf[20];
216 const char *name;
217 void (*release)(struct device *);
218
219 if (!to_sas_internal(shost->transportt)->f->smp_handler) {
220 printk("%s can't handle SMP requests\n", shost->hostt->name);
221 return 0;
222 }
223
224 if (rphy) {
225 q = blk_init_queue(sas_non_host_smp_request, NULL);
226 dev = &rphy->dev;
227 name = dev_name(dev);
228 release = NULL;
229 } else {
230 q = blk_init_queue(sas_host_smp_request, NULL);
231 dev = &shost->shost_gendev;
232 snprintf(namebuf, sizeof(namebuf),
233 "sas_host%d", shost->host_no);
234 name = namebuf;
235 release = sas_host_release;
236 }
237 if (!q)
238 return -ENOMEM;
239
240 error = bsg_register_queue(q, dev, name, release);
241 if (error) {
242 blk_cleanup_queue(q);
243 return -ENOMEM;
244 }
245
246 if (rphy)
247 rphy->q = q;
248 else
249 to_sas_host_attrs(shost)->q = q;
250
251 if (rphy)
252 q->queuedata = rphy;
253 else
254 q->queuedata = shost;
255
256 queue_flag_set_unlocked(QUEUE_FLAG_BIDI, q);
257 return 0;
258}
259
260static void sas_bsg_remove(struct Scsi_Host *shost, struct sas_rphy *rphy)
261{
262 struct request_queue *q;
263
264 if (rphy)
265 q = rphy->q;
266 else
267 q = to_sas_host_attrs(shost)->q;
268
269 if (!q)
270 return;
271
272 bsg_unregister_queue(q);
273}
274
275/*
276 * SAS host attributes
277 */
278
279static int sas_host_setup(struct transport_container *tc, struct device *dev,
280 struct device *cdev)
281{
282 struct Scsi_Host *shost = dev_to_shost(dev);
283 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
284
285 INIT_LIST_HEAD(&sas_host->rphy_list);
286 mutex_init(&sas_host->lock);
287 sas_host->next_target_id = 0;
288 sas_host->next_expander_id = 0;
289 sas_host->next_port_id = 0;
290
291 if (sas_bsg_initialize(shost, NULL))
292 dev_printk(KERN_ERR, dev, "fail to a bsg device %d\n",
293 shost->host_no);
294
295 return 0;
296}
297
298static int sas_host_remove(struct transport_container *tc, struct device *dev,
299 struct device *cdev)
300{
301 struct Scsi_Host *shost = dev_to_shost(dev);
302
303 sas_bsg_remove(shost, NULL);
304
305 return 0;
306}
307
308static DECLARE_TRANSPORT_CLASS(sas_host_class,
309 "sas_host", sas_host_setup, sas_host_remove, NULL);
310
311static int sas_host_match(struct attribute_container *cont,
312 struct device *dev)
313{
314 struct Scsi_Host *shost;
315 struct sas_internal *i;
316
317 if (!scsi_is_host_device(dev))
318 return 0;
319 shost = dev_to_shost(dev);
320
321 if (!shost->transportt)
322 return 0;
323 if (shost->transportt->host_attrs.ac.class !=
324 &sas_host_class.class)
325 return 0;
326
327 i = to_sas_internal(shost->transportt);
328 return &i->t.host_attrs.ac == cont;
329}
330
331static int do_sas_phy_delete(struct device *dev, void *data)
332{
333 int pass = (int)(unsigned long)data;
334
335 if (pass == 0 && scsi_is_sas_port(dev))
336 sas_port_delete(dev_to_sas_port(dev));
337 else if (pass == 1 && scsi_is_sas_phy(dev))
338 sas_phy_delete(dev_to_phy(dev));
339 return 0;
340}
341
342/**
343 * sas_remove_children - tear down a devices SAS data structures
344 * @dev: device belonging to the sas object
345 *
346 * Removes all SAS PHYs and remote PHYs for a given object
347 */
348void sas_remove_children(struct device *dev)
349{
350 device_for_each_child(dev, (void *)0, do_sas_phy_delete);
351 device_for_each_child(dev, (void *)1, do_sas_phy_delete);
352}
353EXPORT_SYMBOL(sas_remove_children);
354
355/**
356 * sas_remove_host - tear down a Scsi_Host's SAS data structures
357 * @shost: Scsi Host that is torn down
358 *
359 * Removes all SAS PHYs and remote PHYs for a given Scsi_Host.
360 * Must be called just before scsi_remove_host for SAS HBAs.
361 */
362void sas_remove_host(struct Scsi_Host *shost)
363{
364 sas_remove_children(&shost->shost_gendev);
365}
366EXPORT_SYMBOL(sas_remove_host);
367
368/**
369 * sas_tlr_supported - checking TLR bit in vpd 0x90
370 * @sdev: scsi device struct
371 *
372 * Check Transport Layer Retries are supported or not.
373 * If vpd page 0x90 is present, TRL is supported.
374 *
375 */
376unsigned int
377sas_tlr_supported(struct scsi_device *sdev)
378{
379 const int vpd_len = 32;
380 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
381 char *buffer = kzalloc(vpd_len, GFP_KERNEL);
382 int ret = 0;
383
384 if (scsi_get_vpd_page(sdev, 0x90, buffer, vpd_len))
385 goto out;
386
387 /*
388 * Magic numbers: the VPD Protocol page (0x90)
389 * has a 4 byte header and then one entry per device port
390 * the TLR bit is at offset 8 on each port entry
391 * if we take the first port, that's at total offset 12
392 */
393 ret = buffer[12] & 0x01;
394
395 out:
396 kfree(buffer);
397 rdev->tlr_supported = ret;
398 return ret;
399
400}
401EXPORT_SYMBOL_GPL(sas_tlr_supported);
402
403/**
404 * sas_disable_tlr - setting TLR flags
405 * @sdev: scsi device struct
406 *
407 * Seting tlr_enabled flag to 0.
408 *
409 */
410void
411sas_disable_tlr(struct scsi_device *sdev)
412{
413 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
414
415 rdev->tlr_enabled = 0;
416}
417EXPORT_SYMBOL_GPL(sas_disable_tlr);
418
419/**
420 * sas_enable_tlr - setting TLR flags
421 * @sdev: scsi device struct
422 *
423 * Seting tlr_enabled flag 1.
424 *
425 */
426void sas_enable_tlr(struct scsi_device *sdev)
427{
428 unsigned int tlr_supported = 0;
429 tlr_supported = sas_tlr_supported(sdev);
430
431 if (tlr_supported) {
432 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
433
434 rdev->tlr_enabled = 1;
435 }
436
437 return;
438}
439EXPORT_SYMBOL_GPL(sas_enable_tlr);
440
441unsigned int sas_is_tlr_enabled(struct scsi_device *sdev)
442{
443 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
444 return rdev->tlr_enabled;
445}
446EXPORT_SYMBOL_GPL(sas_is_tlr_enabled);
447
448/*
449 * SAS Phy attributes
450 */
451
452#define sas_phy_show_simple(field, name, format_string, cast) \
453static ssize_t \
454show_sas_phy_##name(struct device *dev, \
455 struct device_attribute *attr, char *buf) \
456{ \
457 struct sas_phy *phy = transport_class_to_phy(dev); \
458 \
459 return snprintf(buf, 20, format_string, cast phy->field); \
460}
461
462#define sas_phy_simple_attr(field, name, format_string, type) \
463 sas_phy_show_simple(field, name, format_string, (type)) \
464static DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
465
466#define sas_phy_show_protocol(field, name) \
467static ssize_t \
468show_sas_phy_##name(struct device *dev, \
469 struct device_attribute *attr, char *buf) \
470{ \
471 struct sas_phy *phy = transport_class_to_phy(dev); \
472 \
473 if (!phy->field) \
474 return snprintf(buf, 20, "none\n"); \
475 return get_sas_protocol_names(phy->field, buf); \
476}
477
478#define sas_phy_protocol_attr(field, name) \
479 sas_phy_show_protocol(field, name) \
480static DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
481
482#define sas_phy_show_linkspeed(field) \
483static ssize_t \
484show_sas_phy_##field(struct device *dev, \
485 struct device_attribute *attr, char *buf) \
486{ \
487 struct sas_phy *phy = transport_class_to_phy(dev); \
488 \
489 return get_sas_linkspeed_names(phy->field, buf); \
490}
491
492/* Fudge to tell if we're minimum or maximum */
493#define sas_phy_store_linkspeed(field) \
494static ssize_t \
495store_sas_phy_##field(struct device *dev, \
496 struct device_attribute *attr, \
497 const char *buf, size_t count) \
498{ \
499 struct sas_phy *phy = transport_class_to_phy(dev); \
500 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \
501 struct sas_internal *i = to_sas_internal(shost->transportt); \
502 u32 value; \
503 struct sas_phy_linkrates rates = {0}; \
504 int error; \
505 \
506 error = set_sas_linkspeed_names(&value, buf); \
507 if (error) \
508 return error; \
509 rates.field = value; \
510 error = i->f->set_phy_speed(phy, &rates); \
511 \
512 return error ? error : count; \
513}
514
515#define sas_phy_linkspeed_rw_attr(field) \
516 sas_phy_show_linkspeed(field) \
517 sas_phy_store_linkspeed(field) \
518static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, \
519 store_sas_phy_##field)
520
521#define sas_phy_linkspeed_attr(field) \
522 sas_phy_show_linkspeed(field) \
523static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
524
525
526#define sas_phy_show_linkerror(field) \
527static ssize_t \
528show_sas_phy_##field(struct device *dev, \
529 struct device_attribute *attr, char *buf) \
530{ \
531 struct sas_phy *phy = transport_class_to_phy(dev); \
532 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \
533 struct sas_internal *i = to_sas_internal(shost->transportt); \
534 int error; \
535 \
536 error = i->f->get_linkerrors ? i->f->get_linkerrors(phy) : 0; \
537 if (error) \
538 return error; \
539 return snprintf(buf, 20, "%u\n", phy->field); \
540}
541
542#define sas_phy_linkerror_attr(field) \
543 sas_phy_show_linkerror(field) \
544static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
545
546
547static ssize_t
548show_sas_device_type(struct device *dev,
549 struct device_attribute *attr, char *buf)
550{
551 struct sas_phy *phy = transport_class_to_phy(dev);
552
553 if (!phy->identify.device_type)
554 return snprintf(buf, 20, "none\n");
555 return get_sas_device_type_names(phy->identify.device_type, buf);
556}
557static DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL);
558
559static ssize_t do_sas_phy_enable(struct device *dev,
560 size_t count, int enable)
561{
562 struct sas_phy *phy = transport_class_to_phy(dev);
563 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
564 struct sas_internal *i = to_sas_internal(shost->transportt);
565 int error;
566
567 error = i->f->phy_enable(phy, enable);
568 if (error)
569 return error;
570 phy->enabled = enable;
571 return count;
572};
573
574static ssize_t
575store_sas_phy_enable(struct device *dev, struct device_attribute *attr,
576 const char *buf, size_t count)
577{
578 if (count < 1)
579 return -EINVAL;
580
581 switch (buf[0]) {
582 case '0':
583 do_sas_phy_enable(dev, count, 0);
584 break;
585 case '1':
586 do_sas_phy_enable(dev, count, 1);
587 break;
588 default:
589 return -EINVAL;
590 }
591
592 return count;
593}
594
595static ssize_t
596show_sas_phy_enable(struct device *dev, struct device_attribute *attr,
597 char *buf)
598{
599 struct sas_phy *phy = transport_class_to_phy(dev);
600
601 return snprintf(buf, 20, "%d", phy->enabled);
602}
603
604static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, show_sas_phy_enable,
605 store_sas_phy_enable);
606
607static ssize_t
608do_sas_phy_reset(struct device *dev, size_t count, int hard_reset)
609{
610 struct sas_phy *phy = transport_class_to_phy(dev);
611 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
612 struct sas_internal *i = to_sas_internal(shost->transportt);
613 int error;
614
615 error = i->f->phy_reset(phy, hard_reset);
616 if (error)
617 return error;
618 return count;
619};
620
621static ssize_t
622store_sas_link_reset(struct device *dev, struct device_attribute *attr,
623 const char *buf, size_t count)
624{
625 return do_sas_phy_reset(dev, count, 0);
626}
627static DEVICE_ATTR(link_reset, S_IWUSR, NULL, store_sas_link_reset);
628
629static ssize_t
630store_sas_hard_reset(struct device *dev, struct device_attribute *attr,
631 const char *buf, size_t count)
632{
633 return do_sas_phy_reset(dev, count, 1);
634}
635static DEVICE_ATTR(hard_reset, S_IWUSR, NULL, store_sas_hard_reset);
636
637sas_phy_protocol_attr(identify.initiator_port_protocols,
638 initiator_port_protocols);
639sas_phy_protocol_attr(identify.target_port_protocols,
640 target_port_protocols);
641sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
642 unsigned long long);
643sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
644//sas_phy_simple_attr(port_identifier, port_identifier, "%d\n", int);
645sas_phy_linkspeed_attr(negotiated_linkrate);
646sas_phy_linkspeed_attr(minimum_linkrate_hw);
647sas_phy_linkspeed_rw_attr(minimum_linkrate);
648sas_phy_linkspeed_attr(maximum_linkrate_hw);
649sas_phy_linkspeed_rw_attr(maximum_linkrate);
650sas_phy_linkerror_attr(invalid_dword_count);
651sas_phy_linkerror_attr(running_disparity_error_count);
652sas_phy_linkerror_attr(loss_of_dword_sync_count);
653sas_phy_linkerror_attr(phy_reset_problem_count);
654
655
656static DECLARE_TRANSPORT_CLASS(sas_phy_class,
657 "sas_phy", NULL, NULL, NULL);
658
659static int sas_phy_match(struct attribute_container *cont, struct device *dev)
660{
661 struct Scsi_Host *shost;
662 struct sas_internal *i;
663
664 if (!scsi_is_sas_phy(dev))
665 return 0;
666 shost = dev_to_shost(dev->parent);
667
668 if (!shost->transportt)
669 return 0;
670 if (shost->transportt->host_attrs.ac.class !=
671 &sas_host_class.class)
672 return 0;
673
674 i = to_sas_internal(shost->transportt);
675 return &i->phy_attr_cont.ac == cont;
676}
677
678static void sas_phy_release(struct device *dev)
679{
680 struct sas_phy *phy = dev_to_phy(dev);
681
682 put_device(dev->parent);
683 kfree(phy);
684}
685
686/**
687 * sas_phy_alloc - allocates and initialize a SAS PHY structure
688 * @parent: Parent device
689 * @number: Phy index
690 *
691 * Allocates an SAS PHY structure. It will be added in the device tree
692 * below the device specified by @parent, which has to be either a Scsi_Host
693 * or sas_rphy.
694 *
695 * Returns:
696 * SAS PHY allocated or %NULL if the allocation failed.
697 */
698struct sas_phy *sas_phy_alloc(struct device *parent, int number)
699{
700 struct Scsi_Host *shost = dev_to_shost(parent);
701 struct sas_phy *phy;
702
703 phy = kzalloc(sizeof(*phy), GFP_KERNEL);
704 if (!phy)
705 return NULL;
706
707 phy->number = number;
708 phy->enabled = 1;
709
710 device_initialize(&phy->dev);
711 phy->dev.parent = get_device(parent);
712 phy->dev.release = sas_phy_release;
713 INIT_LIST_HEAD(&phy->port_siblings);
714 if (scsi_is_sas_expander_device(parent)) {
715 struct sas_rphy *rphy = dev_to_rphy(parent);
716 dev_set_name(&phy->dev, "phy-%d:%d:%d", shost->host_no,
717 rphy->scsi_target_id, number);
718 } else
719 dev_set_name(&phy->dev, "phy-%d:%d", shost->host_no, number);
720
721 transport_setup_device(&phy->dev);
722
723 return phy;
724}
725EXPORT_SYMBOL(sas_phy_alloc);
726
727/**
728 * sas_phy_add - add a SAS PHY to the device hierarchy
729 * @phy: The PHY to be added
730 *
731 * Publishes a SAS PHY to the rest of the system.
732 */
733int sas_phy_add(struct sas_phy *phy)
734{
735 int error;
736
737 error = device_add(&phy->dev);
738 if (!error) {
739 transport_add_device(&phy->dev);
740 transport_configure_device(&phy->dev);
741 }
742
743 return error;
744}
745EXPORT_SYMBOL(sas_phy_add);
746
747/**
748 * sas_phy_free - free a SAS PHY
749 * @phy: SAS PHY to free
750 *
751 * Frees the specified SAS PHY.
752 *
753 * Note:
754 * This function must only be called on a PHY that has not
755 * successfully been added using sas_phy_add().
756 */
757void sas_phy_free(struct sas_phy *phy)
758{
759 transport_destroy_device(&phy->dev);
760 put_device(&phy->dev);
761}
762EXPORT_SYMBOL(sas_phy_free);
763
764/**
765 * sas_phy_delete - remove SAS PHY
766 * @phy: SAS PHY to remove
767 *
768 * Removes the specified SAS PHY. If the SAS PHY has an
769 * associated remote PHY it is removed before.
770 */
771void
772sas_phy_delete(struct sas_phy *phy)
773{
774 struct device *dev = &phy->dev;
775
776 /* this happens if the phy is still part of a port when deleted */
777 BUG_ON(!list_empty(&phy->port_siblings));
778
779 transport_remove_device(dev);
780 device_del(dev);
781 transport_destroy_device(dev);
782 put_device(dev);
783}
784EXPORT_SYMBOL(sas_phy_delete);
785
786/**
787 * scsi_is_sas_phy - check if a struct device represents a SAS PHY
788 * @dev: device to check
789 *
790 * Returns:
791 * %1 if the device represents a SAS PHY, %0 else
792 */
793int scsi_is_sas_phy(const struct device *dev)
794{
795 return dev->release == sas_phy_release;
796}
797EXPORT_SYMBOL(scsi_is_sas_phy);
798
799/*
800 * SAS Port attributes
801 */
802#define sas_port_show_simple(field, name, format_string, cast) \
803static ssize_t \
804show_sas_port_##name(struct device *dev, \
805 struct device_attribute *attr, char *buf) \
806{ \
807 struct sas_port *port = transport_class_to_sas_port(dev); \
808 \
809 return snprintf(buf, 20, format_string, cast port->field); \
810}
811
812#define sas_port_simple_attr(field, name, format_string, type) \
813 sas_port_show_simple(field, name, format_string, (type)) \
814static DEVICE_ATTR(name, S_IRUGO, show_sas_port_##name, NULL)
815
816sas_port_simple_attr(num_phys, num_phys, "%d\n", int);
817
818static DECLARE_TRANSPORT_CLASS(sas_port_class,
819 "sas_port", NULL, NULL, NULL);
820
821static int sas_port_match(struct attribute_container *cont, struct device *dev)
822{
823 struct Scsi_Host *shost;
824 struct sas_internal *i;
825
826 if (!scsi_is_sas_port(dev))
827 return 0;
828 shost = dev_to_shost(dev->parent);
829
830 if (!shost->transportt)
831 return 0;
832 if (shost->transportt->host_attrs.ac.class !=
833 &sas_host_class.class)
834 return 0;
835
836 i = to_sas_internal(shost->transportt);
837 return &i->port_attr_cont.ac == cont;
838}
839
840
841static void sas_port_release(struct device *dev)
842{
843 struct sas_port *port = dev_to_sas_port(dev);
844
845 BUG_ON(!list_empty(&port->phy_list));
846
847 put_device(dev->parent);
848 kfree(port);
849}
850
851static void sas_port_create_link(struct sas_port *port,
852 struct sas_phy *phy)
853{
854 int res;
855
856 res = sysfs_create_link(&port->dev.kobj, &phy->dev.kobj,
857 dev_name(&phy->dev));
858 if (res)
859 goto err;
860 res = sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port");
861 if (res)
862 goto err;
863 return;
864err:
865 printk(KERN_ERR "%s: Cannot create port links, err=%d\n",
866 __func__, res);
867}
868
869static void sas_port_delete_link(struct sas_port *port,
870 struct sas_phy *phy)
871{
872 sysfs_remove_link(&port->dev.kobj, dev_name(&phy->dev));
873 sysfs_remove_link(&phy->dev.kobj, "port");
874}
875
876/** sas_port_alloc - allocate and initialize a SAS port structure
877 *
878 * @parent: parent device
879 * @port_id: port number
880 *
881 * Allocates a SAS port structure. It will be added to the device tree
882 * below the device specified by @parent which must be either a Scsi_Host
883 * or a sas_expander_device.
884 *
885 * Returns %NULL on error
886 */
887struct sas_port *sas_port_alloc(struct device *parent, int port_id)
888{
889 struct Scsi_Host *shost = dev_to_shost(parent);
890 struct sas_port *port;
891
892 port = kzalloc(sizeof(*port), GFP_KERNEL);
893 if (!port)
894 return NULL;
895
896 port->port_identifier = port_id;
897
898 device_initialize(&port->dev);
899
900 port->dev.parent = get_device(parent);
901 port->dev.release = sas_port_release;
902
903 mutex_init(&port->phy_list_mutex);
904 INIT_LIST_HEAD(&port->phy_list);
905
906 if (scsi_is_sas_expander_device(parent)) {
907 struct sas_rphy *rphy = dev_to_rphy(parent);
908 dev_set_name(&port->dev, "port-%d:%d:%d", shost->host_no,
909 rphy->scsi_target_id, port->port_identifier);
910 } else
911 dev_set_name(&port->dev, "port-%d:%d", shost->host_no,
912 port->port_identifier);
913
914 transport_setup_device(&port->dev);
915
916 return port;
917}
918EXPORT_SYMBOL(sas_port_alloc);
919
920/** sas_port_alloc_num - allocate and initialize a SAS port structure
921 *
922 * @parent: parent device
923 *
924 * Allocates a SAS port structure and a number to go with it. This
925 * interface is really for adapters where the port number has no
926 * meansing, so the sas class should manage them. It will be added to
927 * the device tree below the device specified by @parent which must be
928 * either a Scsi_Host or a sas_expander_device.
929 *
930 * Returns %NULL on error
931 */
932struct sas_port *sas_port_alloc_num(struct device *parent)
933{
934 int index;
935 struct Scsi_Host *shost = dev_to_shost(parent);
936 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
937
938 /* FIXME: use idr for this eventually */
939 mutex_lock(&sas_host->lock);
940 if (scsi_is_sas_expander_device(parent)) {
941 struct sas_rphy *rphy = dev_to_rphy(parent);
942 struct sas_expander_device *exp = rphy_to_expander_device(rphy);
943
944 index = exp->next_port_id++;
945 } else
946 index = sas_host->next_port_id++;
947 mutex_unlock(&sas_host->lock);
948 return sas_port_alloc(parent, index);
949}
950EXPORT_SYMBOL(sas_port_alloc_num);
951
952/**
953 * sas_port_add - add a SAS port to the device hierarchy
954 * @port: port to be added
955 *
956 * publishes a port to the rest of the system
957 */
958int sas_port_add(struct sas_port *port)
959{
960 int error;
961
962 /* No phys should be added until this is made visible */
963 BUG_ON(!list_empty(&port->phy_list));
964
965 error = device_add(&port->dev);
966
967 if (error)
968 return error;
969
970 transport_add_device(&port->dev);
971 transport_configure_device(&port->dev);
972
973 return 0;
974}
975EXPORT_SYMBOL(sas_port_add);
976
977/**
978 * sas_port_free - free a SAS PORT
979 * @port: SAS PORT to free
980 *
981 * Frees the specified SAS PORT.
982 *
983 * Note:
984 * This function must only be called on a PORT that has not
985 * successfully been added using sas_port_add().
986 */
987void sas_port_free(struct sas_port *port)
988{
989 transport_destroy_device(&port->dev);
990 put_device(&port->dev);
991}
992EXPORT_SYMBOL(sas_port_free);
993
994/**
995 * sas_port_delete - remove SAS PORT
996 * @port: SAS PORT to remove
997 *
998 * Removes the specified SAS PORT. If the SAS PORT has an
999 * associated phys, unlink them from the port as well.
1000 */
1001void sas_port_delete(struct sas_port *port)
1002{
1003 struct device *dev = &port->dev;
1004 struct sas_phy *phy, *tmp_phy;
1005
1006 if (port->rphy) {
1007 sas_rphy_delete(port->rphy);
1008 port->rphy = NULL;
1009 }
1010
1011 mutex_lock(&port->phy_list_mutex);
1012 list_for_each_entry_safe(phy, tmp_phy, &port->phy_list,
1013 port_siblings) {
1014 sas_port_delete_link(port, phy);
1015 list_del_init(&phy->port_siblings);
1016 }
1017 mutex_unlock(&port->phy_list_mutex);
1018
1019 if (port->is_backlink) {
1020 struct device *parent = port->dev.parent;
1021
1022 sysfs_remove_link(&port->dev.kobj, dev_name(parent));
1023 port->is_backlink = 0;
1024 }
1025
1026 transport_remove_device(dev);
1027 device_del(dev);
1028 transport_destroy_device(dev);
1029 put_device(dev);
1030}
1031EXPORT_SYMBOL(sas_port_delete);
1032
1033/**
1034 * scsi_is_sas_port - check if a struct device represents a SAS port
1035 * @dev: device to check
1036 *
1037 * Returns:
1038 * %1 if the device represents a SAS Port, %0 else
1039 */
1040int scsi_is_sas_port(const struct device *dev)
1041{
1042 return dev->release == sas_port_release;
1043}
1044EXPORT_SYMBOL(scsi_is_sas_port);
1045
1046/**
1047 * sas_port_add_phy - add another phy to a port to form a wide port
1048 * @port: port to add the phy to
1049 * @phy: phy to add
1050 *
1051 * When a port is initially created, it is empty (has no phys). All
1052 * ports must have at least one phy to operated, and all wide ports
1053 * must have at least two. The current code makes no difference
1054 * between ports and wide ports, but the only object that can be
1055 * connected to a remote device is a port, so ports must be formed on
1056 * all devices with phys if they're connected to anything.
1057 */
1058void sas_port_add_phy(struct sas_port *port, struct sas_phy *phy)
1059{
1060 mutex_lock(&port->phy_list_mutex);
1061 if (unlikely(!list_empty(&phy->port_siblings))) {
1062 /* make sure we're already on this port */
1063 struct sas_phy *tmp;
1064
1065 list_for_each_entry(tmp, &port->phy_list, port_siblings)
1066 if (tmp == phy)
1067 break;
1068 /* If this trips, you added a phy that was already
1069 * part of a different port */
1070 if (unlikely(tmp != phy)) {
1071 dev_printk(KERN_ERR, &port->dev, "trying to add phy %s fails: it's already part of another port\n",
1072 dev_name(&phy->dev));
1073 BUG();
1074 }
1075 } else {
1076 sas_port_create_link(port, phy);
1077 list_add_tail(&phy->port_siblings, &port->phy_list);
1078 port->num_phys++;
1079 }
1080 mutex_unlock(&port->phy_list_mutex);
1081}
1082EXPORT_SYMBOL(sas_port_add_phy);
1083
1084/**
1085 * sas_port_delete_phy - remove a phy from a port or wide port
1086 * @port: port to remove the phy from
1087 * @phy: phy to remove
1088 *
1089 * This operation is used for tearing down ports again. It must be
1090 * done to every port or wide port before calling sas_port_delete.
1091 */
1092void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy)
1093{
1094 mutex_lock(&port->phy_list_mutex);
1095 sas_port_delete_link(port, phy);
1096 list_del_init(&phy->port_siblings);
1097 port->num_phys--;
1098 mutex_unlock(&port->phy_list_mutex);
1099}
1100EXPORT_SYMBOL(sas_port_delete_phy);
1101
1102void sas_port_mark_backlink(struct sas_port *port)
1103{
1104 int res;
1105 struct device *parent = port->dev.parent->parent->parent;
1106
1107 if (port->is_backlink)
1108 return;
1109 port->is_backlink = 1;
1110 res = sysfs_create_link(&port->dev.kobj, &parent->kobj,
1111 dev_name(parent));
1112 if (res)
1113 goto err;
1114 return;
1115err:
1116 printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n",
1117 __func__, res);
1118
1119}
1120EXPORT_SYMBOL(sas_port_mark_backlink);
1121
1122/*
1123 * SAS remote PHY attributes.
1124 */
1125
1126#define sas_rphy_show_simple(field, name, format_string, cast) \
1127static ssize_t \
1128show_sas_rphy_##name(struct device *dev, \
1129 struct device_attribute *attr, char *buf) \
1130{ \
1131 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1132 \
1133 return snprintf(buf, 20, format_string, cast rphy->field); \
1134}
1135
1136#define sas_rphy_simple_attr(field, name, format_string, type) \
1137 sas_rphy_show_simple(field, name, format_string, (type)) \
1138static SAS_DEVICE_ATTR(rphy, name, S_IRUGO, \
1139 show_sas_rphy_##name, NULL)
1140
1141#define sas_rphy_show_protocol(field, name) \
1142static ssize_t \
1143show_sas_rphy_##name(struct device *dev, \
1144 struct device_attribute *attr, char *buf) \
1145{ \
1146 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1147 \
1148 if (!rphy->field) \
1149 return snprintf(buf, 20, "none\n"); \
1150 return get_sas_protocol_names(rphy->field, buf); \
1151}
1152
1153#define sas_rphy_protocol_attr(field, name) \
1154 sas_rphy_show_protocol(field, name) \
1155static SAS_DEVICE_ATTR(rphy, name, S_IRUGO, \
1156 show_sas_rphy_##name, NULL)
1157
1158static ssize_t
1159show_sas_rphy_device_type(struct device *dev,
1160 struct device_attribute *attr, char *buf)
1161{
1162 struct sas_rphy *rphy = transport_class_to_rphy(dev);
1163
1164 if (!rphy->identify.device_type)
1165 return snprintf(buf, 20, "none\n");
1166 return get_sas_device_type_names(
1167 rphy->identify.device_type, buf);
1168}
1169
1170static SAS_DEVICE_ATTR(rphy, device_type, S_IRUGO,
1171 show_sas_rphy_device_type, NULL);
1172
1173static ssize_t
1174show_sas_rphy_enclosure_identifier(struct device *dev,
1175 struct device_attribute *attr, char *buf)
1176{
1177 struct sas_rphy *rphy = transport_class_to_rphy(dev);
1178 struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
1179 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
1180 struct sas_internal *i = to_sas_internal(shost->transportt);
1181 u64 identifier;
1182 int error;
1183
1184 /*
1185 * Only devices behind an expander are supported, because the
1186 * enclosure identifier is a SMP feature.
1187 */
1188 if (scsi_is_sas_phy_local(phy))
1189 return -EINVAL;
1190
1191 error = i->f->get_enclosure_identifier(rphy, &identifier);
1192 if (error)
1193 return error;
1194 return sprintf(buf, "0x%llx\n", (unsigned long long)identifier);
1195}
1196
1197static SAS_DEVICE_ATTR(rphy, enclosure_identifier, S_IRUGO,
1198 show_sas_rphy_enclosure_identifier, NULL);
1199
1200static ssize_t
1201show_sas_rphy_bay_identifier(struct device *dev,
1202 struct device_attribute *attr, char *buf)
1203{
1204 struct sas_rphy *rphy = transport_class_to_rphy(dev);
1205 struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
1206 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
1207 struct sas_internal *i = to_sas_internal(shost->transportt);
1208 int val;
1209
1210 if (scsi_is_sas_phy_local(phy))
1211 return -EINVAL;
1212
1213 val = i->f->get_bay_identifier(rphy);
1214 if (val < 0)
1215 return val;
1216 return sprintf(buf, "%d\n", val);
1217}
1218
1219static SAS_DEVICE_ATTR(rphy, bay_identifier, S_IRUGO,
1220 show_sas_rphy_bay_identifier, NULL);
1221
1222sas_rphy_protocol_attr(identify.initiator_port_protocols,
1223 initiator_port_protocols);
1224sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols);
1225sas_rphy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
1226 unsigned long long);
1227sas_rphy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
1228
1229/* only need 8 bytes of data plus header (4 or 8) */
1230#define BUF_SIZE 64
1231
1232int sas_read_port_mode_page(struct scsi_device *sdev)
1233{
1234 char *buffer = kzalloc(BUF_SIZE, GFP_KERNEL), *msdata;
1235 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
1236 struct scsi_mode_data mode_data;
1237 int res, error;
1238
1239 if (!buffer)
1240 return -ENOMEM;
1241
1242 res = scsi_mode_sense(sdev, 1, 0x19, buffer, BUF_SIZE, 30*HZ, 3,
1243 &mode_data, NULL);
1244
1245 error = -EINVAL;
1246 if (!scsi_status_is_good(res))
1247 goto out;
1248
1249 msdata = buffer + mode_data.header_length +
1250 mode_data.block_descriptor_length;
1251
1252 if (msdata - buffer > BUF_SIZE - 8)
1253 goto out;
1254
1255 error = 0;
1256
1257 rdev->ready_led_meaning = msdata[2] & 0x10 ? 1 : 0;
1258 rdev->I_T_nexus_loss_timeout = (msdata[4] << 8) + msdata[5];
1259 rdev->initiator_response_timeout = (msdata[6] << 8) + msdata[7];
1260
1261 out:
1262 kfree(buffer);
1263 return error;
1264}
1265EXPORT_SYMBOL(sas_read_port_mode_page);
1266
1267static DECLARE_TRANSPORT_CLASS(sas_end_dev_class,
1268 "sas_end_device", NULL, NULL, NULL);
1269
1270#define sas_end_dev_show_simple(field, name, format_string, cast) \
1271static ssize_t \
1272show_sas_end_dev_##name(struct device *dev, \
1273 struct device_attribute *attr, char *buf) \
1274{ \
1275 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1276 struct sas_end_device *rdev = rphy_to_end_device(rphy); \
1277 \
1278 return snprintf(buf, 20, format_string, cast rdev->field); \
1279}
1280
1281#define sas_end_dev_simple_attr(field, name, format_string, type) \
1282 sas_end_dev_show_simple(field, name, format_string, (type)) \
1283static SAS_DEVICE_ATTR(end_dev, name, S_IRUGO, \
1284 show_sas_end_dev_##name, NULL)
1285
1286sas_end_dev_simple_attr(ready_led_meaning, ready_led_meaning, "%d\n", int);
1287sas_end_dev_simple_attr(I_T_nexus_loss_timeout, I_T_nexus_loss_timeout,
1288 "%d\n", int);
1289sas_end_dev_simple_attr(initiator_response_timeout, initiator_response_timeout,
1290 "%d\n", int);
1291sas_end_dev_simple_attr(tlr_supported, tlr_supported,
1292 "%d\n", int);
1293sas_end_dev_simple_attr(tlr_enabled, tlr_enabled,
1294 "%d\n", int);
1295
1296static DECLARE_TRANSPORT_CLASS(sas_expander_class,
1297 "sas_expander", NULL, NULL, NULL);
1298
1299#define sas_expander_show_simple(field, name, format_string, cast) \
1300static ssize_t \
1301show_sas_expander_##name(struct device *dev, \
1302 struct device_attribute *attr, char *buf) \
1303{ \
1304 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1305 struct sas_expander_device *edev = rphy_to_expander_device(rphy); \
1306 \
1307 return snprintf(buf, 20, format_string, cast edev->field); \
1308}
1309
1310#define sas_expander_simple_attr(field, name, format_string, type) \
1311 sas_expander_show_simple(field, name, format_string, (type)) \
1312static SAS_DEVICE_ATTR(expander, name, S_IRUGO, \
1313 show_sas_expander_##name, NULL)
1314
1315sas_expander_simple_attr(vendor_id, vendor_id, "%s\n", char *);
1316sas_expander_simple_attr(product_id, product_id, "%s\n", char *);
1317sas_expander_simple_attr(product_rev, product_rev, "%s\n", char *);
1318sas_expander_simple_attr(component_vendor_id, component_vendor_id,
1319 "%s\n", char *);
1320sas_expander_simple_attr(component_id, component_id, "%u\n", unsigned int);
1321sas_expander_simple_attr(component_revision_id, component_revision_id, "%u\n",
1322 unsigned int);
1323sas_expander_simple_attr(level, level, "%d\n", int);
1324
1325static DECLARE_TRANSPORT_CLASS(sas_rphy_class,
1326 "sas_device", NULL, NULL, NULL);
1327
1328static int sas_rphy_match(struct attribute_container *cont, struct device *dev)
1329{
1330 struct Scsi_Host *shost;
1331 struct sas_internal *i;
1332
1333 if (!scsi_is_sas_rphy(dev))
1334 return 0;
1335 shost = dev_to_shost(dev->parent->parent);
1336
1337 if (!shost->transportt)
1338 return 0;
1339 if (shost->transportt->host_attrs.ac.class !=
1340 &sas_host_class.class)
1341 return 0;
1342
1343 i = to_sas_internal(shost->transportt);
1344 return &i->rphy_attr_cont.ac == cont;
1345}
1346
1347static int sas_end_dev_match(struct attribute_container *cont,
1348 struct device *dev)
1349{
1350 struct Scsi_Host *shost;
1351 struct sas_internal *i;
1352 struct sas_rphy *rphy;
1353
1354 if (!scsi_is_sas_rphy(dev))
1355 return 0;
1356 shost = dev_to_shost(dev->parent->parent);
1357 rphy = dev_to_rphy(dev);
1358
1359 if (!shost->transportt)
1360 return 0;
1361 if (shost->transportt->host_attrs.ac.class !=
1362 &sas_host_class.class)
1363 return 0;
1364
1365 i = to_sas_internal(shost->transportt);
1366 return &i->end_dev_attr_cont.ac == cont &&
1367 rphy->identify.device_type == SAS_END_DEVICE;
1368}
1369
1370static int sas_expander_match(struct attribute_container *cont,
1371 struct device *dev)
1372{
1373 struct Scsi_Host *shost;
1374 struct sas_internal *i;
1375 struct sas_rphy *rphy;
1376
1377 if (!scsi_is_sas_rphy(dev))
1378 return 0;
1379 shost = dev_to_shost(dev->parent->parent);
1380 rphy = dev_to_rphy(dev);
1381
1382 if (!shost->transportt)
1383 return 0;
1384 if (shost->transportt->host_attrs.ac.class !=
1385 &sas_host_class.class)
1386 return 0;
1387
1388 i = to_sas_internal(shost->transportt);
1389 return &i->expander_attr_cont.ac == cont &&
1390 (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE ||
1391 rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE);
1392}
1393
1394static void sas_expander_release(struct device *dev)
1395{
1396 struct sas_rphy *rphy = dev_to_rphy(dev);
1397 struct sas_expander_device *edev = rphy_to_expander_device(rphy);
1398
1399 if (rphy->q)
1400 blk_cleanup_queue(rphy->q);
1401
1402 put_device(dev->parent);
1403 kfree(edev);
1404}
1405
1406static void sas_end_device_release(struct device *dev)
1407{
1408 struct sas_rphy *rphy = dev_to_rphy(dev);
1409 struct sas_end_device *edev = rphy_to_end_device(rphy);
1410
1411 if (rphy->q)
1412 blk_cleanup_queue(rphy->q);
1413
1414 put_device(dev->parent);
1415 kfree(edev);
1416}
1417
1418/**
1419 * sas_rphy_initialize - common rphy intialization
1420 * @rphy: rphy to initialise
1421 *
1422 * Used by both sas_end_device_alloc() and sas_expander_alloc() to
1423 * initialise the common rphy component of each.
1424 */
1425static void sas_rphy_initialize(struct sas_rphy *rphy)
1426{
1427 INIT_LIST_HEAD(&rphy->list);
1428}
1429
1430/**
1431 * sas_end_device_alloc - allocate an rphy for an end device
1432 * @parent: which port
1433 *
1434 * Allocates an SAS remote PHY structure, connected to @parent.
1435 *
1436 * Returns:
1437 * SAS PHY allocated or %NULL if the allocation failed.
1438 */
1439struct sas_rphy *sas_end_device_alloc(struct sas_port *parent)
1440{
1441 struct Scsi_Host *shost = dev_to_shost(&parent->dev);
1442 struct sas_end_device *rdev;
1443
1444 rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
1445 if (!rdev) {
1446 return NULL;
1447 }
1448
1449 device_initialize(&rdev->rphy.dev);
1450 rdev->rphy.dev.parent = get_device(&parent->dev);
1451 rdev->rphy.dev.release = sas_end_device_release;
1452 if (scsi_is_sas_expander_device(parent->dev.parent)) {
1453 struct sas_rphy *rphy = dev_to_rphy(parent->dev.parent);
1454 dev_set_name(&rdev->rphy.dev, "end_device-%d:%d:%d",
1455 shost->host_no, rphy->scsi_target_id,
1456 parent->port_identifier);
1457 } else
1458 dev_set_name(&rdev->rphy.dev, "end_device-%d:%d",
1459 shost->host_no, parent->port_identifier);
1460 rdev->rphy.identify.device_type = SAS_END_DEVICE;
1461 sas_rphy_initialize(&rdev->rphy);
1462 transport_setup_device(&rdev->rphy.dev);
1463
1464 return &rdev->rphy;
1465}
1466EXPORT_SYMBOL(sas_end_device_alloc);
1467
1468/**
1469 * sas_expander_alloc - allocate an rphy for an end device
1470 * @parent: which port
1471 * @type: SAS_EDGE_EXPANDER_DEVICE or SAS_FANOUT_EXPANDER_DEVICE
1472 *
1473 * Allocates an SAS remote PHY structure, connected to @parent.
1474 *
1475 * Returns:
1476 * SAS PHY allocated or %NULL if the allocation failed.
1477 */
1478struct sas_rphy *sas_expander_alloc(struct sas_port *parent,
1479 enum sas_device_type type)
1480{
1481 struct Scsi_Host *shost = dev_to_shost(&parent->dev);
1482 struct sas_expander_device *rdev;
1483 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1484
1485 BUG_ON(type != SAS_EDGE_EXPANDER_DEVICE &&
1486 type != SAS_FANOUT_EXPANDER_DEVICE);
1487
1488 rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
1489 if (!rdev) {
1490 return NULL;
1491 }
1492
1493 device_initialize(&rdev->rphy.dev);
1494 rdev->rphy.dev.parent = get_device(&parent->dev);
1495 rdev->rphy.dev.release = sas_expander_release;
1496 mutex_lock(&sas_host->lock);
1497 rdev->rphy.scsi_target_id = sas_host->next_expander_id++;
1498 mutex_unlock(&sas_host->lock);
1499 dev_set_name(&rdev->rphy.dev, "expander-%d:%d",
1500 shost->host_no, rdev->rphy.scsi_target_id);
1501 rdev->rphy.identify.device_type = type;
1502 sas_rphy_initialize(&rdev->rphy);
1503 transport_setup_device(&rdev->rphy.dev);
1504
1505 return &rdev->rphy;
1506}
1507EXPORT_SYMBOL(sas_expander_alloc);
1508
1509/**
1510 * sas_rphy_add - add a SAS remote PHY to the device hierarchy
1511 * @rphy: The remote PHY to be added
1512 *
1513 * Publishes a SAS remote PHY to the rest of the system.
1514 */
1515int sas_rphy_add(struct sas_rphy *rphy)
1516{
1517 struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
1518 struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
1519 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1520 struct sas_identify *identify = &rphy->identify;
1521 int error;
1522
1523 if (parent->rphy)
1524 return -ENXIO;
1525 parent->rphy = rphy;
1526
1527 error = device_add(&rphy->dev);
1528 if (error)
1529 return error;
1530 transport_add_device(&rphy->dev);
1531 transport_configure_device(&rphy->dev);
1532 if (sas_bsg_initialize(shost, rphy))
1533 printk("fail to a bsg device %s\n", dev_name(&rphy->dev));
1534
1535
1536 mutex_lock(&sas_host->lock);
1537 list_add_tail(&rphy->list, &sas_host->rphy_list);
1538 if (identify->device_type == SAS_END_DEVICE &&
1539 (identify->target_port_protocols &
1540 (SAS_PROTOCOL_SSP|SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA)))
1541 rphy->scsi_target_id = sas_host->next_target_id++;
1542 else if (identify->device_type == SAS_END_DEVICE)
1543 rphy->scsi_target_id = -1;
1544 mutex_unlock(&sas_host->lock);
1545
1546 if (identify->device_type == SAS_END_DEVICE &&
1547 rphy->scsi_target_id != -1) {
1548 scsi_scan_target(&rphy->dev, 0,
1549 rphy->scsi_target_id, SCAN_WILD_CARD, 0);
1550 }
1551
1552 return 0;
1553}
1554EXPORT_SYMBOL(sas_rphy_add);
1555
1556/**
1557 * sas_rphy_free - free a SAS remote PHY
1558 * @rphy: SAS remote PHY to free
1559 *
1560 * Frees the specified SAS remote PHY.
1561 *
1562 * Note:
1563 * This function must only be called on a remote
1564 * PHY that has not successfully been added using
1565 * sas_rphy_add() (or has been sas_rphy_remove()'d)
1566 */
1567void sas_rphy_free(struct sas_rphy *rphy)
1568{
1569 struct device *dev = &rphy->dev;
1570 struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
1571 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1572
1573 mutex_lock(&sas_host->lock);
1574 list_del(&rphy->list);
1575 mutex_unlock(&sas_host->lock);
1576
1577 sas_bsg_remove(shost, rphy);
1578
1579 transport_destroy_device(dev);
1580
1581 put_device(dev);
1582}
1583EXPORT_SYMBOL(sas_rphy_free);
1584
1585/**
1586 * sas_rphy_delete - remove and free SAS remote PHY
1587 * @rphy: SAS remote PHY to remove and free
1588 *
1589 * Removes the specified SAS remote PHY and frees it.
1590 */
1591void
1592sas_rphy_delete(struct sas_rphy *rphy)
1593{
1594 sas_rphy_remove(rphy);
1595 sas_rphy_free(rphy);
1596}
1597EXPORT_SYMBOL(sas_rphy_delete);
1598
1599/**
1600 * sas_rphy_remove - remove SAS remote PHY
1601 * @rphy: SAS remote phy to remove
1602 *
1603 * Removes the specified SAS remote PHY.
1604 */
1605void
1606sas_rphy_remove(struct sas_rphy *rphy)
1607{
1608 struct device *dev = &rphy->dev;
1609 struct sas_port *parent = dev_to_sas_port(dev->parent);
1610
1611 switch (rphy->identify.device_type) {
1612 case SAS_END_DEVICE:
1613 scsi_remove_target(dev);
1614 break;
1615 case SAS_EDGE_EXPANDER_DEVICE:
1616 case SAS_FANOUT_EXPANDER_DEVICE:
1617 sas_remove_children(dev);
1618 break;
1619 default:
1620 break;
1621 }
1622
1623 transport_remove_device(dev);
1624 device_del(dev);
1625
1626 parent->rphy = NULL;
1627}
1628EXPORT_SYMBOL(sas_rphy_remove);
1629
1630/**
1631 * scsi_is_sas_rphy - check if a struct device represents a SAS remote PHY
1632 * @dev: device to check
1633 *
1634 * Returns:
1635 * %1 if the device represents a SAS remote PHY, %0 else
1636 */
1637int scsi_is_sas_rphy(const struct device *dev)
1638{
1639 return dev->release == sas_end_device_release ||
1640 dev->release == sas_expander_release;
1641}
1642EXPORT_SYMBOL(scsi_is_sas_rphy);
1643
1644
1645/*
1646 * SCSI scan helper
1647 */
1648
1649static int sas_user_scan(struct Scsi_Host *shost, uint channel,
1650 uint id, uint lun)
1651{
1652 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1653 struct sas_rphy *rphy;
1654
1655 mutex_lock(&sas_host->lock);
1656 list_for_each_entry(rphy, &sas_host->rphy_list, list) {
1657 if (rphy->identify.device_type != SAS_END_DEVICE ||
1658 rphy->scsi_target_id == -1)
1659 continue;
1660
1661 if ((channel == SCAN_WILD_CARD || channel == 0) &&
1662 (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) {
1663 scsi_scan_target(&rphy->dev, 0,
1664 rphy->scsi_target_id, lun, 1);
1665 }
1666 }
1667 mutex_unlock(&sas_host->lock);
1668
1669 return 0;
1670}
1671
1672
1673/*
1674 * Setup / Teardown code
1675 */
1676
1677#define SETUP_TEMPLATE(attrb, field, perm, test) \
1678 i->private_##attrb[count] = dev_attr_##field; \
1679 i->private_##attrb[count].attr.mode = perm; \
1680 i->attrb[count] = &i->private_##attrb[count]; \
1681 if (test) \
1682 count++
1683
1684#define SETUP_TEMPLATE_RW(attrb, field, perm, test, ro_test, ro_perm) \
1685 i->private_##attrb[count] = dev_attr_##field; \
1686 i->private_##attrb[count].attr.mode = perm; \
1687 if (ro_test) { \
1688 i->private_##attrb[count].attr.mode = ro_perm; \
1689 i->private_##attrb[count].store = NULL; \
1690 } \
1691 i->attrb[count] = &i->private_##attrb[count]; \
1692 if (test) \
1693 count++
1694
1695#define SETUP_RPORT_ATTRIBUTE(field) \
1696 SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, 1)
1697
1698#define SETUP_OPTIONAL_RPORT_ATTRIBUTE(field, func) \
1699 SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, i->f->func)
1700
1701#define SETUP_PHY_ATTRIBUTE(field) \
1702 SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1)
1703
1704#define SETUP_PHY_ATTRIBUTE_RW(field) \
1705 SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
1706 !i->f->set_phy_speed, S_IRUGO)
1707
1708#define SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(field, func) \
1709 SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
1710 !i->f->func, S_IRUGO)
1711
1712#define SETUP_PORT_ATTRIBUTE(field) \
1713 SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1)
1714
1715#define SETUP_OPTIONAL_PHY_ATTRIBUTE(field, func) \
1716 SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func)
1717
1718#define SETUP_PHY_ATTRIBUTE_WRONLY(field) \
1719 SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, 1)
1720
1721#define SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(field, func) \
1722 SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, i->f->func)
1723
1724#define SETUP_END_DEV_ATTRIBUTE(field) \
1725 SETUP_TEMPLATE(end_dev_attrs, field, S_IRUGO, 1)
1726
1727#define SETUP_EXPANDER_ATTRIBUTE(field) \
1728 SETUP_TEMPLATE(expander_attrs, expander_##field, S_IRUGO, 1)
1729
1730/**
1731 * sas_attach_transport - instantiate SAS transport template
1732 * @ft: SAS transport class function template
1733 */
1734struct scsi_transport_template *
1735sas_attach_transport(struct sas_function_template *ft)
1736{
1737 struct sas_internal *i;
1738 int count;
1739
1740 i = kzalloc(sizeof(struct sas_internal), GFP_KERNEL);
1741 if (!i)
1742 return NULL;
1743
1744 i->t.user_scan = sas_user_scan;
1745
1746 i->t.host_attrs.ac.attrs = &i->host_attrs[0];
1747 i->t.host_attrs.ac.class = &sas_host_class.class;
1748 i->t.host_attrs.ac.match = sas_host_match;
1749 transport_container_register(&i->t.host_attrs);
1750 i->t.host_size = sizeof(struct sas_host_attrs);
1751
1752 i->phy_attr_cont.ac.class = &sas_phy_class.class;
1753 i->phy_attr_cont.ac.attrs = &i->phy_attrs[0];
1754 i->phy_attr_cont.ac.match = sas_phy_match;
1755 transport_container_register(&i->phy_attr_cont);
1756
1757 i->port_attr_cont.ac.class = &sas_port_class.class;
1758 i->port_attr_cont.ac.attrs = &i->port_attrs[0];
1759 i->port_attr_cont.ac.match = sas_port_match;
1760 transport_container_register(&i->port_attr_cont);
1761
1762 i->rphy_attr_cont.ac.class = &sas_rphy_class.class;
1763 i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0];
1764 i->rphy_attr_cont.ac.match = sas_rphy_match;
1765 transport_container_register(&i->rphy_attr_cont);
1766
1767 i->end_dev_attr_cont.ac.class = &sas_end_dev_class.class;
1768 i->end_dev_attr_cont.ac.attrs = &i->end_dev_attrs[0];
1769 i->end_dev_attr_cont.ac.match = sas_end_dev_match;
1770 transport_container_register(&i->end_dev_attr_cont);
1771
1772 i->expander_attr_cont.ac.class = &sas_expander_class.class;
1773 i->expander_attr_cont.ac.attrs = &i->expander_attrs[0];
1774 i->expander_attr_cont.ac.match = sas_expander_match;
1775 transport_container_register(&i->expander_attr_cont);
1776
1777 i->f = ft;
1778
1779 count = 0;
1780 SETUP_PHY_ATTRIBUTE(initiator_port_protocols);
1781 SETUP_PHY_ATTRIBUTE(target_port_protocols);
1782 SETUP_PHY_ATTRIBUTE(device_type);
1783 SETUP_PHY_ATTRIBUTE(sas_address);
1784 SETUP_PHY_ATTRIBUTE(phy_identifier);
1785 //SETUP_PHY_ATTRIBUTE(port_identifier);
1786 SETUP_PHY_ATTRIBUTE(negotiated_linkrate);
1787 SETUP_PHY_ATTRIBUTE(minimum_linkrate_hw);
1788 SETUP_PHY_ATTRIBUTE_RW(minimum_linkrate);
1789 SETUP_PHY_ATTRIBUTE(maximum_linkrate_hw);
1790 SETUP_PHY_ATTRIBUTE_RW(maximum_linkrate);
1791
1792 SETUP_PHY_ATTRIBUTE(invalid_dword_count);
1793 SETUP_PHY_ATTRIBUTE(running_disparity_error_count);
1794 SETUP_PHY_ATTRIBUTE(loss_of_dword_sync_count);
1795 SETUP_PHY_ATTRIBUTE(phy_reset_problem_count);
1796 SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(link_reset, phy_reset);
1797 SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(hard_reset, phy_reset);
1798 SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(enable, phy_enable);
1799 i->phy_attrs[count] = NULL;
1800
1801 count = 0;
1802 SETUP_PORT_ATTRIBUTE(num_phys);
1803 i->port_attrs[count] = NULL;
1804
1805 count = 0;
1806 SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols);
1807 SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols);
1808 SETUP_RPORT_ATTRIBUTE(rphy_device_type);
1809 SETUP_RPORT_ATTRIBUTE(rphy_sas_address);
1810 SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier);
1811 SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_enclosure_identifier,
1812 get_enclosure_identifier);
1813 SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_bay_identifier,
1814 get_bay_identifier);
1815 i->rphy_attrs[count] = NULL;
1816
1817 count = 0;
1818 SETUP_END_DEV_ATTRIBUTE(end_dev_ready_led_meaning);
1819 SETUP_END_DEV_ATTRIBUTE(end_dev_I_T_nexus_loss_timeout);
1820 SETUP_END_DEV_ATTRIBUTE(end_dev_initiator_response_timeout);
1821 SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_supported);
1822 SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_enabled);
1823 i->end_dev_attrs[count] = NULL;
1824
1825 count = 0;
1826 SETUP_EXPANDER_ATTRIBUTE(vendor_id);
1827 SETUP_EXPANDER_ATTRIBUTE(product_id);
1828 SETUP_EXPANDER_ATTRIBUTE(product_rev);
1829 SETUP_EXPANDER_ATTRIBUTE(component_vendor_id);
1830 SETUP_EXPANDER_ATTRIBUTE(component_id);
1831 SETUP_EXPANDER_ATTRIBUTE(component_revision_id);
1832 SETUP_EXPANDER_ATTRIBUTE(level);
1833 i->expander_attrs[count] = NULL;
1834
1835 return &i->t;
1836}
1837EXPORT_SYMBOL(sas_attach_transport);
1838
1839/**
1840 * sas_release_transport - release SAS transport template instance
1841 * @t: transport template instance
1842 */
1843void sas_release_transport(struct scsi_transport_template *t)
1844{
1845 struct sas_internal *i = to_sas_internal(t);
1846
1847 transport_container_unregister(&i->t.host_attrs);
1848 transport_container_unregister(&i->phy_attr_cont);
1849 transport_container_unregister(&i->port_attr_cont);
1850 transport_container_unregister(&i->rphy_attr_cont);
1851 transport_container_unregister(&i->end_dev_attr_cont);
1852 transport_container_unregister(&i->expander_attr_cont);
1853
1854 kfree(i);
1855}
1856EXPORT_SYMBOL(sas_release_transport);
1857
1858static __init int sas_transport_init(void)
1859{
1860 int error;
1861
1862 error = transport_class_register(&sas_host_class);
1863 if (error)
1864 goto out;
1865 error = transport_class_register(&sas_phy_class);
1866 if (error)
1867 goto out_unregister_transport;
1868 error = transport_class_register(&sas_port_class);
1869 if (error)
1870 goto out_unregister_phy;
1871 error = transport_class_register(&sas_rphy_class);
1872 if (error)
1873 goto out_unregister_port;
1874 error = transport_class_register(&sas_end_dev_class);
1875 if (error)
1876 goto out_unregister_rphy;
1877 error = transport_class_register(&sas_expander_class);
1878 if (error)
1879 goto out_unregister_end_dev;
1880
1881 return 0;
1882
1883 out_unregister_end_dev:
1884 transport_class_unregister(&sas_end_dev_class);
1885 out_unregister_rphy:
1886 transport_class_unregister(&sas_rphy_class);
1887 out_unregister_port:
1888 transport_class_unregister(&sas_port_class);
1889 out_unregister_phy:
1890 transport_class_unregister(&sas_phy_class);
1891 out_unregister_transport:
1892 transport_class_unregister(&sas_host_class);
1893 out:
1894 return error;
1895
1896}
1897
1898static void __exit sas_transport_exit(void)
1899{
1900 transport_class_unregister(&sas_host_class);
1901 transport_class_unregister(&sas_phy_class);
1902 transport_class_unregister(&sas_port_class);
1903 transport_class_unregister(&sas_rphy_class);
1904 transport_class_unregister(&sas_end_dev_class);
1905 transport_class_unregister(&sas_expander_class);
1906}
1907
1908MODULE_AUTHOR("Christoph Hellwig");
1909MODULE_DESCRIPTION("SAS Transport Attributes");
1910MODULE_LICENSE("GPL");
1911
1912module_init(sas_transport_init);
1913module_exit(sas_transport_exit);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2005-2006 Dell Inc.
4 *
5 * Serial Attached SCSI (SAS) transport class.
6 *
7 * The SAS transport class contains common code to deal with SAS HBAs,
8 * an aproximated representation of SAS topologies in the driver model,
9 * and various sysfs attributes to expose these topologies and management
10 * interfaces to userspace.
11 *
12 * In addition to the basic SCSI core objects this transport class
13 * introduces two additional intermediate objects: The SAS PHY
14 * as represented by struct sas_phy defines an "outgoing" PHY on
15 * a SAS HBA or Expander, and the SAS remote PHY represented by
16 * struct sas_rphy defines an "incoming" PHY on a SAS Expander or
17 * end device. Note that this is purely a software concept, the
18 * underlying hardware for a PHY and a remote PHY is the exactly
19 * the same.
20 *
21 * There is no concept of a SAS port in this code, users can see
22 * what PHYs form a wide port based on the port_identifier attribute,
23 * which is the same for all PHYs in a port.
24 */
25
26#include <linux/init.h>
27#include <linux/module.h>
28#include <linux/jiffies.h>
29#include <linux/err.h>
30#include <linux/slab.h>
31#include <linux/string.h>
32#include <linux/blkdev.h>
33#include <linux/bsg.h>
34
35#include <scsi/scsi.h>
36#include <scsi/scsi_cmnd.h>
37#include <scsi/scsi_device.h>
38#include <scsi/scsi_host.h>
39#include <scsi/scsi_transport.h>
40#include <scsi/scsi_transport_sas.h>
41
42#include "scsi_sas_internal.h"
43struct sas_host_attrs {
44 struct list_head rphy_list;
45 struct mutex lock;
46 struct request_queue *q;
47 u32 next_target_id;
48 u32 next_expander_id;
49 int next_port_id;
50};
51#define to_sas_host_attrs(host) ((struct sas_host_attrs *)(host)->shost_data)
52
53
54/*
55 * Hack to allow attributes of the same name in different objects.
56 */
57#define SAS_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \
58 struct device_attribute dev_attr_##_prefix##_##_name = \
59 __ATTR(_name,_mode,_show,_store)
60
61
62/*
63 * Pretty printing helpers
64 */
65
66#define sas_bitfield_name_match(title, table) \
67static ssize_t \
68get_sas_##title##_names(u32 table_key, char *buf) \
69{ \
70 char *prefix = ""; \
71 ssize_t len = 0; \
72 int i; \
73 \
74 for (i = 0; i < ARRAY_SIZE(table); i++) { \
75 if (table[i].value & table_key) { \
76 len += sprintf(buf + len, "%s%s", \
77 prefix, table[i].name); \
78 prefix = ", "; \
79 } \
80 } \
81 len += sprintf(buf + len, "\n"); \
82 return len; \
83}
84
85#define sas_bitfield_name_set(title, table) \
86static ssize_t \
87set_sas_##title##_names(u32 *table_key, const char *buf) \
88{ \
89 ssize_t len = 0; \
90 int i; \
91 \
92 for (i = 0; i < ARRAY_SIZE(table); i++) { \
93 len = strlen(table[i].name); \
94 if (strncmp(buf, table[i].name, len) == 0 && \
95 (buf[len] == '\n' || buf[len] == '\0')) { \
96 *table_key = table[i].value; \
97 return 0; \
98 } \
99 } \
100 return -EINVAL; \
101}
102
103#define sas_bitfield_name_search(title, table) \
104static ssize_t \
105get_sas_##title##_names(u32 table_key, char *buf) \
106{ \
107 ssize_t len = 0; \
108 int i; \
109 \
110 for (i = 0; i < ARRAY_SIZE(table); i++) { \
111 if (table[i].value == table_key) { \
112 len += sprintf(buf + len, "%s", \
113 table[i].name); \
114 break; \
115 } \
116 } \
117 len += sprintf(buf + len, "\n"); \
118 return len; \
119}
120
121static struct {
122 u32 value;
123 char *name;
124} sas_device_type_names[] = {
125 { SAS_PHY_UNUSED, "unused" },
126 { SAS_END_DEVICE, "end device" },
127 { SAS_EDGE_EXPANDER_DEVICE, "edge expander" },
128 { SAS_FANOUT_EXPANDER_DEVICE, "fanout expander" },
129};
130sas_bitfield_name_search(device_type, sas_device_type_names)
131
132
133static struct {
134 u32 value;
135 char *name;
136} sas_protocol_names[] = {
137 { SAS_PROTOCOL_SATA, "sata" },
138 { SAS_PROTOCOL_SMP, "smp" },
139 { SAS_PROTOCOL_STP, "stp" },
140 { SAS_PROTOCOL_SSP, "ssp" },
141};
142sas_bitfield_name_match(protocol, sas_protocol_names)
143
144static struct {
145 u32 value;
146 char *name;
147} sas_linkspeed_names[] = {
148 { SAS_LINK_RATE_UNKNOWN, "Unknown" },
149 { SAS_PHY_DISABLED, "Phy disabled" },
150 { SAS_LINK_RATE_FAILED, "Link Rate failed" },
151 { SAS_SATA_SPINUP_HOLD, "Spin-up hold" },
152 { SAS_LINK_RATE_1_5_GBPS, "1.5 Gbit" },
153 { SAS_LINK_RATE_3_0_GBPS, "3.0 Gbit" },
154 { SAS_LINK_RATE_6_0_GBPS, "6.0 Gbit" },
155 { SAS_LINK_RATE_12_0_GBPS, "12.0 Gbit" },
156 { SAS_LINK_RATE_22_5_GBPS, "22.5 Gbit" },
157};
158sas_bitfield_name_search(linkspeed, sas_linkspeed_names)
159sas_bitfield_name_set(linkspeed, sas_linkspeed_names)
160
161static struct sas_end_device *sas_sdev_to_rdev(struct scsi_device *sdev)
162{
163 struct sas_rphy *rphy = target_to_rphy(sdev->sdev_target);
164 struct sas_end_device *rdev;
165
166 BUG_ON(rphy->identify.device_type != SAS_END_DEVICE);
167
168 rdev = rphy_to_end_device(rphy);
169 return rdev;
170}
171
172static int sas_smp_dispatch(struct bsg_job *job)
173{
174 struct Scsi_Host *shost = dev_to_shost(job->dev);
175 struct sas_rphy *rphy = NULL;
176
177 if (!scsi_is_host_device(job->dev))
178 rphy = dev_to_rphy(job->dev);
179
180 if (!job->reply_payload.payload_len) {
181 dev_warn(job->dev, "space for a smp response is missing\n");
182 bsg_job_done(job, -EINVAL, 0);
183 return 0;
184 }
185
186 to_sas_internal(shost->transportt)->f->smp_handler(job, shost, rphy);
187 return 0;
188}
189
190static int sas_bsg_initialize(struct Scsi_Host *shost, struct sas_rphy *rphy)
191{
192 struct request_queue *q;
193
194 if (!to_sas_internal(shost->transportt)->f->smp_handler) {
195 printk("%s can't handle SMP requests\n", shost->hostt->name);
196 return 0;
197 }
198
199 if (rphy) {
200 q = bsg_setup_queue(&rphy->dev, dev_name(&rphy->dev), NULL,
201 sas_smp_dispatch, NULL, 0);
202 if (IS_ERR(q))
203 return PTR_ERR(q);
204 rphy->q = q;
205 } else {
206 char name[20];
207
208 snprintf(name, sizeof(name), "sas_host%d", shost->host_no);
209 q = bsg_setup_queue(&shost->shost_gendev, name, NULL,
210 sas_smp_dispatch, NULL, 0);
211 if (IS_ERR(q))
212 return PTR_ERR(q);
213 to_sas_host_attrs(shost)->q = q;
214 }
215
216 return 0;
217}
218
219/*
220 * SAS host attributes
221 */
222
223static int sas_host_setup(struct transport_container *tc, struct device *dev,
224 struct device *cdev)
225{
226 struct Scsi_Host *shost = dev_to_shost(dev);
227 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
228 struct device *dma_dev = shost->dma_dev;
229
230 INIT_LIST_HEAD(&sas_host->rphy_list);
231 mutex_init(&sas_host->lock);
232 sas_host->next_target_id = 0;
233 sas_host->next_expander_id = 0;
234 sas_host->next_port_id = 0;
235
236 if (sas_bsg_initialize(shost, NULL))
237 dev_printk(KERN_ERR, dev, "fail to a bsg device %d\n",
238 shost->host_no);
239
240 if (dma_dev->dma_mask) {
241 shost->opt_sectors = min_t(unsigned int, shost->max_sectors,
242 dma_opt_mapping_size(dma_dev) >> SECTOR_SHIFT);
243 }
244
245 return 0;
246}
247
248static int sas_host_remove(struct transport_container *tc, struct device *dev,
249 struct device *cdev)
250{
251 struct Scsi_Host *shost = dev_to_shost(dev);
252 struct request_queue *q = to_sas_host_attrs(shost)->q;
253
254 bsg_remove_queue(q);
255 return 0;
256}
257
258static DECLARE_TRANSPORT_CLASS(sas_host_class,
259 "sas_host", sas_host_setup, sas_host_remove, NULL);
260
261static int sas_host_match(struct attribute_container *cont,
262 struct device *dev)
263{
264 struct Scsi_Host *shost;
265 struct sas_internal *i;
266
267 if (!scsi_is_host_device(dev))
268 return 0;
269 shost = dev_to_shost(dev);
270
271 if (!shost->transportt)
272 return 0;
273 if (shost->transportt->host_attrs.ac.class !=
274 &sas_host_class.class)
275 return 0;
276
277 i = to_sas_internal(shost->transportt);
278 return &i->t.host_attrs.ac == cont;
279}
280
281static int do_sas_phy_delete(struct device *dev, void *data)
282{
283 int pass = (int)(unsigned long)data;
284
285 if (pass == 0 && scsi_is_sas_port(dev))
286 sas_port_delete(dev_to_sas_port(dev));
287 else if (pass == 1 && scsi_is_sas_phy(dev))
288 sas_phy_delete(dev_to_phy(dev));
289 return 0;
290}
291
292/**
293 * sas_remove_children - tear down a devices SAS data structures
294 * @dev: device belonging to the sas object
295 *
296 * Removes all SAS PHYs and remote PHYs for a given object
297 */
298void sas_remove_children(struct device *dev)
299{
300 device_for_each_child(dev, (void *)0, do_sas_phy_delete);
301 device_for_each_child(dev, (void *)1, do_sas_phy_delete);
302}
303EXPORT_SYMBOL(sas_remove_children);
304
305/**
306 * sas_remove_host - tear down a Scsi_Host's SAS data structures
307 * @shost: Scsi Host that is torn down
308 *
309 * Removes all SAS PHYs and remote PHYs for a given Scsi_Host and remove the
310 * Scsi_Host as well.
311 *
312 * Note: Do not call scsi_remove_host() on the Scsi_Host any more, as it is
313 * already removed.
314 */
315void sas_remove_host(struct Scsi_Host *shost)
316{
317 sas_remove_children(&shost->shost_gendev);
318 scsi_remove_host(shost);
319}
320EXPORT_SYMBOL(sas_remove_host);
321
322/**
323 * sas_get_address - return the SAS address of the device
324 * @sdev: scsi device
325 *
326 * Returns the SAS address of the scsi device
327 */
328u64 sas_get_address(struct scsi_device *sdev)
329{
330 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
331
332 return rdev->rphy.identify.sas_address;
333}
334EXPORT_SYMBOL(sas_get_address);
335
336/**
337 * sas_tlr_supported - checking TLR bit in vpd 0x90
338 * @sdev: scsi device struct
339 *
340 * Check Transport Layer Retries are supported or not.
341 * If vpd page 0x90 is present, TRL is supported.
342 *
343 */
344unsigned int
345sas_tlr_supported(struct scsi_device *sdev)
346{
347 const int vpd_len = 32;
348 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
349 char *buffer = kzalloc(vpd_len, GFP_KERNEL);
350 int ret = 0;
351
352 if (!buffer)
353 goto out;
354
355 if (scsi_get_vpd_page(sdev, 0x90, buffer, vpd_len))
356 goto out;
357
358 /*
359 * Magic numbers: the VPD Protocol page (0x90)
360 * has a 4 byte header and then one entry per device port
361 * the TLR bit is at offset 8 on each port entry
362 * if we take the first port, that's at total offset 12
363 */
364 ret = buffer[12] & 0x01;
365
366 out:
367 kfree(buffer);
368 rdev->tlr_supported = ret;
369 return ret;
370
371}
372EXPORT_SYMBOL_GPL(sas_tlr_supported);
373
374/**
375 * sas_disable_tlr - setting TLR flags
376 * @sdev: scsi device struct
377 *
378 * Seting tlr_enabled flag to 0.
379 *
380 */
381void
382sas_disable_tlr(struct scsi_device *sdev)
383{
384 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
385
386 rdev->tlr_enabled = 0;
387}
388EXPORT_SYMBOL_GPL(sas_disable_tlr);
389
390/**
391 * sas_enable_tlr - setting TLR flags
392 * @sdev: scsi device struct
393 *
394 * Seting tlr_enabled flag 1.
395 *
396 */
397void sas_enable_tlr(struct scsi_device *sdev)
398{
399 unsigned int tlr_supported = 0;
400 tlr_supported = sas_tlr_supported(sdev);
401
402 if (tlr_supported) {
403 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
404
405 rdev->tlr_enabled = 1;
406 }
407
408 return;
409}
410EXPORT_SYMBOL_GPL(sas_enable_tlr);
411
412unsigned int sas_is_tlr_enabled(struct scsi_device *sdev)
413{
414 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
415 return rdev->tlr_enabled;
416}
417EXPORT_SYMBOL_GPL(sas_is_tlr_enabled);
418
419/**
420 * sas_ata_ncq_prio_supported - Check for ATA NCQ command priority support
421 * @sdev: SCSI device
422 *
423 * Check if an ATA device supports NCQ priority using VPD page 89h (ATA
424 * Information). Since this VPD page is implemented only for ATA devices,
425 * this function always returns false for SCSI devices.
426 */
427bool sas_ata_ncq_prio_supported(struct scsi_device *sdev)
428{
429 struct scsi_vpd *vpd;
430 bool ncq_prio_supported = false;
431
432 rcu_read_lock();
433 vpd = rcu_dereference(sdev->vpd_pg89);
434 if (vpd && vpd->len >= 214)
435 ncq_prio_supported = (vpd->data[213] >> 4) & 1;
436 rcu_read_unlock();
437
438 return ncq_prio_supported;
439}
440EXPORT_SYMBOL_GPL(sas_ata_ncq_prio_supported);
441
442/*
443 * SAS Phy attributes
444 */
445
446#define sas_phy_show_simple(field, name, format_string, cast) \
447static ssize_t \
448show_sas_phy_##name(struct device *dev, \
449 struct device_attribute *attr, char *buf) \
450{ \
451 struct sas_phy *phy = transport_class_to_phy(dev); \
452 \
453 return snprintf(buf, 20, format_string, cast phy->field); \
454}
455
456#define sas_phy_simple_attr(field, name, format_string, type) \
457 sas_phy_show_simple(field, name, format_string, (type)) \
458static DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
459
460#define sas_phy_show_protocol(field, name) \
461static ssize_t \
462show_sas_phy_##name(struct device *dev, \
463 struct device_attribute *attr, char *buf) \
464{ \
465 struct sas_phy *phy = transport_class_to_phy(dev); \
466 \
467 if (!phy->field) \
468 return snprintf(buf, 20, "none\n"); \
469 return get_sas_protocol_names(phy->field, buf); \
470}
471
472#define sas_phy_protocol_attr(field, name) \
473 sas_phy_show_protocol(field, name) \
474static DEVICE_ATTR(name, S_IRUGO, show_sas_phy_##name, NULL)
475
476#define sas_phy_show_linkspeed(field) \
477static ssize_t \
478show_sas_phy_##field(struct device *dev, \
479 struct device_attribute *attr, char *buf) \
480{ \
481 struct sas_phy *phy = transport_class_to_phy(dev); \
482 \
483 return get_sas_linkspeed_names(phy->field, buf); \
484}
485
486/* Fudge to tell if we're minimum or maximum */
487#define sas_phy_store_linkspeed(field) \
488static ssize_t \
489store_sas_phy_##field(struct device *dev, \
490 struct device_attribute *attr, \
491 const char *buf, size_t count) \
492{ \
493 struct sas_phy *phy = transport_class_to_phy(dev); \
494 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \
495 struct sas_internal *i = to_sas_internal(shost->transportt); \
496 u32 value; \
497 struct sas_phy_linkrates rates = {0}; \
498 int error; \
499 \
500 error = set_sas_linkspeed_names(&value, buf); \
501 if (error) \
502 return error; \
503 rates.field = value; \
504 error = i->f->set_phy_speed(phy, &rates); \
505 \
506 return error ? error : count; \
507}
508
509#define sas_phy_linkspeed_rw_attr(field) \
510 sas_phy_show_linkspeed(field) \
511 sas_phy_store_linkspeed(field) \
512static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, \
513 store_sas_phy_##field)
514
515#define sas_phy_linkspeed_attr(field) \
516 sas_phy_show_linkspeed(field) \
517static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
518
519
520#define sas_phy_show_linkerror(field) \
521static ssize_t \
522show_sas_phy_##field(struct device *dev, \
523 struct device_attribute *attr, char *buf) \
524{ \
525 struct sas_phy *phy = transport_class_to_phy(dev); \
526 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); \
527 struct sas_internal *i = to_sas_internal(shost->transportt); \
528 int error; \
529 \
530 error = i->f->get_linkerrors ? i->f->get_linkerrors(phy) : 0; \
531 if (error) \
532 return error; \
533 return snprintf(buf, 20, "%u\n", phy->field); \
534}
535
536#define sas_phy_linkerror_attr(field) \
537 sas_phy_show_linkerror(field) \
538static DEVICE_ATTR(field, S_IRUGO, show_sas_phy_##field, NULL)
539
540
541static ssize_t
542show_sas_device_type(struct device *dev,
543 struct device_attribute *attr, char *buf)
544{
545 struct sas_phy *phy = transport_class_to_phy(dev);
546
547 if (!phy->identify.device_type)
548 return snprintf(buf, 20, "none\n");
549 return get_sas_device_type_names(phy->identify.device_type, buf);
550}
551static DEVICE_ATTR(device_type, S_IRUGO, show_sas_device_type, NULL);
552
553static ssize_t do_sas_phy_enable(struct device *dev,
554 size_t count, int enable)
555{
556 struct sas_phy *phy = transport_class_to_phy(dev);
557 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
558 struct sas_internal *i = to_sas_internal(shost->transportt);
559 int error;
560
561 error = i->f->phy_enable(phy, enable);
562 if (error)
563 return error;
564 phy->enabled = enable;
565 return count;
566};
567
568static ssize_t
569store_sas_phy_enable(struct device *dev, struct device_attribute *attr,
570 const char *buf, size_t count)
571{
572 if (count < 1)
573 return -EINVAL;
574
575 switch (buf[0]) {
576 case '0':
577 do_sas_phy_enable(dev, count, 0);
578 break;
579 case '1':
580 do_sas_phy_enable(dev, count, 1);
581 break;
582 default:
583 return -EINVAL;
584 }
585
586 return count;
587}
588
589static ssize_t
590show_sas_phy_enable(struct device *dev, struct device_attribute *attr,
591 char *buf)
592{
593 struct sas_phy *phy = transport_class_to_phy(dev);
594
595 return snprintf(buf, 20, "%d\n", phy->enabled);
596}
597
598static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, show_sas_phy_enable,
599 store_sas_phy_enable);
600
601static ssize_t
602do_sas_phy_reset(struct device *dev, size_t count, int hard_reset)
603{
604 struct sas_phy *phy = transport_class_to_phy(dev);
605 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
606 struct sas_internal *i = to_sas_internal(shost->transportt);
607 int error;
608
609 error = i->f->phy_reset(phy, hard_reset);
610 if (error)
611 return error;
612 phy->enabled = 1;
613 return count;
614};
615
616static ssize_t
617store_sas_link_reset(struct device *dev, struct device_attribute *attr,
618 const char *buf, size_t count)
619{
620 return do_sas_phy_reset(dev, count, 0);
621}
622static DEVICE_ATTR(link_reset, S_IWUSR, NULL, store_sas_link_reset);
623
624static ssize_t
625store_sas_hard_reset(struct device *dev, struct device_attribute *attr,
626 const char *buf, size_t count)
627{
628 return do_sas_phy_reset(dev, count, 1);
629}
630static DEVICE_ATTR(hard_reset, S_IWUSR, NULL, store_sas_hard_reset);
631
632sas_phy_protocol_attr(identify.initiator_port_protocols,
633 initiator_port_protocols);
634sas_phy_protocol_attr(identify.target_port_protocols,
635 target_port_protocols);
636sas_phy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
637 unsigned long long);
638sas_phy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
639sas_phy_linkspeed_attr(negotiated_linkrate);
640sas_phy_linkspeed_attr(minimum_linkrate_hw);
641sas_phy_linkspeed_rw_attr(minimum_linkrate);
642sas_phy_linkspeed_attr(maximum_linkrate_hw);
643sas_phy_linkspeed_rw_attr(maximum_linkrate);
644sas_phy_linkerror_attr(invalid_dword_count);
645sas_phy_linkerror_attr(running_disparity_error_count);
646sas_phy_linkerror_attr(loss_of_dword_sync_count);
647sas_phy_linkerror_attr(phy_reset_problem_count);
648
649static int sas_phy_setup(struct transport_container *tc, struct device *dev,
650 struct device *cdev)
651{
652 struct sas_phy *phy = dev_to_phy(dev);
653 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
654 struct sas_internal *i = to_sas_internal(shost->transportt);
655
656 if (i->f->phy_setup)
657 i->f->phy_setup(phy);
658
659 return 0;
660}
661
662static DECLARE_TRANSPORT_CLASS(sas_phy_class,
663 "sas_phy", sas_phy_setup, NULL, NULL);
664
665static int sas_phy_match(struct attribute_container *cont, struct device *dev)
666{
667 struct Scsi_Host *shost;
668 struct sas_internal *i;
669
670 if (!scsi_is_sas_phy(dev))
671 return 0;
672 shost = dev_to_shost(dev->parent);
673
674 if (!shost->transportt)
675 return 0;
676 if (shost->transportt->host_attrs.ac.class !=
677 &sas_host_class.class)
678 return 0;
679
680 i = to_sas_internal(shost->transportt);
681 return &i->phy_attr_cont.ac == cont;
682}
683
684static void sas_phy_release(struct device *dev)
685{
686 struct sas_phy *phy = dev_to_phy(dev);
687 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
688 struct sas_internal *i = to_sas_internal(shost->transportt);
689
690 if (i->f->phy_release)
691 i->f->phy_release(phy);
692 put_device(dev->parent);
693 kfree(phy);
694}
695
696/**
697 * sas_phy_alloc - allocates and initialize a SAS PHY structure
698 * @parent: Parent device
699 * @number: Phy index
700 *
701 * Allocates an SAS PHY structure. It will be added in the device tree
702 * below the device specified by @parent, which has to be either a Scsi_Host
703 * or sas_rphy.
704 *
705 * Returns:
706 * SAS PHY allocated or %NULL if the allocation failed.
707 */
708struct sas_phy *sas_phy_alloc(struct device *parent, int number)
709{
710 struct Scsi_Host *shost = dev_to_shost(parent);
711 struct sas_phy *phy;
712
713 phy = kzalloc(sizeof(*phy), GFP_KERNEL);
714 if (!phy)
715 return NULL;
716
717 phy->number = number;
718 phy->enabled = 1;
719
720 device_initialize(&phy->dev);
721 phy->dev.parent = get_device(parent);
722 phy->dev.release = sas_phy_release;
723 INIT_LIST_HEAD(&phy->port_siblings);
724 if (scsi_is_sas_expander_device(parent)) {
725 struct sas_rphy *rphy = dev_to_rphy(parent);
726 dev_set_name(&phy->dev, "phy-%d:%d:%d", shost->host_no,
727 rphy->scsi_target_id, number);
728 } else
729 dev_set_name(&phy->dev, "phy-%d:%d", shost->host_no, number);
730
731 transport_setup_device(&phy->dev);
732
733 return phy;
734}
735EXPORT_SYMBOL(sas_phy_alloc);
736
737/**
738 * sas_phy_add - add a SAS PHY to the device hierarchy
739 * @phy: The PHY to be added
740 *
741 * Publishes a SAS PHY to the rest of the system.
742 */
743int sas_phy_add(struct sas_phy *phy)
744{
745 int error;
746
747 error = device_add(&phy->dev);
748 if (error)
749 return error;
750
751 error = transport_add_device(&phy->dev);
752 if (error) {
753 device_del(&phy->dev);
754 return error;
755 }
756 transport_configure_device(&phy->dev);
757
758 return 0;
759}
760EXPORT_SYMBOL(sas_phy_add);
761
762/**
763 * sas_phy_free - free a SAS PHY
764 * @phy: SAS PHY to free
765 *
766 * Frees the specified SAS PHY.
767 *
768 * Note:
769 * This function must only be called on a PHY that has not
770 * successfully been added using sas_phy_add().
771 */
772void sas_phy_free(struct sas_phy *phy)
773{
774 transport_destroy_device(&phy->dev);
775 put_device(&phy->dev);
776}
777EXPORT_SYMBOL(sas_phy_free);
778
779/**
780 * sas_phy_delete - remove SAS PHY
781 * @phy: SAS PHY to remove
782 *
783 * Removes the specified SAS PHY. If the SAS PHY has an
784 * associated remote PHY it is removed before.
785 */
786void
787sas_phy_delete(struct sas_phy *phy)
788{
789 struct device *dev = &phy->dev;
790
791 /* this happens if the phy is still part of a port when deleted */
792 BUG_ON(!list_empty(&phy->port_siblings));
793
794 transport_remove_device(dev);
795 device_del(dev);
796 transport_destroy_device(dev);
797 put_device(dev);
798}
799EXPORT_SYMBOL(sas_phy_delete);
800
801/**
802 * scsi_is_sas_phy - check if a struct device represents a SAS PHY
803 * @dev: device to check
804 *
805 * Returns:
806 * %1 if the device represents a SAS PHY, %0 else
807 */
808int scsi_is_sas_phy(const struct device *dev)
809{
810 return dev->release == sas_phy_release;
811}
812EXPORT_SYMBOL(scsi_is_sas_phy);
813
814/*
815 * SAS Port attributes
816 */
817#define sas_port_show_simple(field, name, format_string, cast) \
818static ssize_t \
819show_sas_port_##name(struct device *dev, \
820 struct device_attribute *attr, char *buf) \
821{ \
822 struct sas_port *port = transport_class_to_sas_port(dev); \
823 \
824 return snprintf(buf, 20, format_string, cast port->field); \
825}
826
827#define sas_port_simple_attr(field, name, format_string, type) \
828 sas_port_show_simple(field, name, format_string, (type)) \
829static DEVICE_ATTR(name, S_IRUGO, show_sas_port_##name, NULL)
830
831sas_port_simple_attr(num_phys, num_phys, "%d\n", int);
832
833static DECLARE_TRANSPORT_CLASS(sas_port_class,
834 "sas_port", NULL, NULL, NULL);
835
836static int sas_port_match(struct attribute_container *cont, struct device *dev)
837{
838 struct Scsi_Host *shost;
839 struct sas_internal *i;
840
841 if (!scsi_is_sas_port(dev))
842 return 0;
843 shost = dev_to_shost(dev->parent);
844
845 if (!shost->transportt)
846 return 0;
847 if (shost->transportt->host_attrs.ac.class !=
848 &sas_host_class.class)
849 return 0;
850
851 i = to_sas_internal(shost->transportt);
852 return &i->port_attr_cont.ac == cont;
853}
854
855
856static void sas_port_release(struct device *dev)
857{
858 struct sas_port *port = dev_to_sas_port(dev);
859
860 BUG_ON(!list_empty(&port->phy_list));
861
862 put_device(dev->parent);
863 kfree(port);
864}
865
866static void sas_port_create_link(struct sas_port *port,
867 struct sas_phy *phy)
868{
869 int res;
870
871 res = sysfs_create_link(&port->dev.kobj, &phy->dev.kobj,
872 dev_name(&phy->dev));
873 if (res)
874 goto err;
875 res = sysfs_create_link(&phy->dev.kobj, &port->dev.kobj, "port");
876 if (res)
877 goto err;
878 return;
879err:
880 printk(KERN_ERR "%s: Cannot create port links, err=%d\n",
881 __func__, res);
882}
883
884static void sas_port_delete_link(struct sas_port *port,
885 struct sas_phy *phy)
886{
887 sysfs_remove_link(&port->dev.kobj, dev_name(&phy->dev));
888 sysfs_remove_link(&phy->dev.kobj, "port");
889}
890
891/** sas_port_alloc - allocate and initialize a SAS port structure
892 *
893 * @parent: parent device
894 * @port_id: port number
895 *
896 * Allocates a SAS port structure. It will be added to the device tree
897 * below the device specified by @parent which must be either a Scsi_Host
898 * or a sas_expander_device.
899 *
900 * Returns %NULL on error
901 */
902struct sas_port *sas_port_alloc(struct device *parent, int port_id)
903{
904 struct Scsi_Host *shost = dev_to_shost(parent);
905 struct sas_port *port;
906
907 port = kzalloc(sizeof(*port), GFP_KERNEL);
908 if (!port)
909 return NULL;
910
911 port->port_identifier = port_id;
912
913 device_initialize(&port->dev);
914
915 port->dev.parent = get_device(parent);
916 port->dev.release = sas_port_release;
917
918 mutex_init(&port->phy_list_mutex);
919 INIT_LIST_HEAD(&port->phy_list);
920
921 if (scsi_is_sas_expander_device(parent)) {
922 struct sas_rphy *rphy = dev_to_rphy(parent);
923 dev_set_name(&port->dev, "port-%d:%d:%d", shost->host_no,
924 rphy->scsi_target_id, port->port_identifier);
925 } else
926 dev_set_name(&port->dev, "port-%d:%d", shost->host_no,
927 port->port_identifier);
928
929 transport_setup_device(&port->dev);
930
931 return port;
932}
933EXPORT_SYMBOL(sas_port_alloc);
934
935/** sas_port_alloc_num - allocate and initialize a SAS port structure
936 *
937 * @parent: parent device
938 *
939 * Allocates a SAS port structure and a number to go with it. This
940 * interface is really for adapters where the port number has no
941 * meansing, so the sas class should manage them. It will be added to
942 * the device tree below the device specified by @parent which must be
943 * either a Scsi_Host or a sas_expander_device.
944 *
945 * Returns %NULL on error
946 */
947struct sas_port *sas_port_alloc_num(struct device *parent)
948{
949 int index;
950 struct Scsi_Host *shost = dev_to_shost(parent);
951 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
952
953 /* FIXME: use idr for this eventually */
954 mutex_lock(&sas_host->lock);
955 if (scsi_is_sas_expander_device(parent)) {
956 struct sas_rphy *rphy = dev_to_rphy(parent);
957 struct sas_expander_device *exp = rphy_to_expander_device(rphy);
958
959 index = exp->next_port_id++;
960 } else
961 index = sas_host->next_port_id++;
962 mutex_unlock(&sas_host->lock);
963 return sas_port_alloc(parent, index);
964}
965EXPORT_SYMBOL(sas_port_alloc_num);
966
967/**
968 * sas_port_add - add a SAS port to the device hierarchy
969 * @port: port to be added
970 *
971 * publishes a port to the rest of the system
972 */
973int sas_port_add(struct sas_port *port)
974{
975 int error;
976
977 /* No phys should be added until this is made visible */
978 BUG_ON(!list_empty(&port->phy_list));
979
980 error = device_add(&port->dev);
981
982 if (error)
983 return error;
984
985 transport_add_device(&port->dev);
986 transport_configure_device(&port->dev);
987
988 return 0;
989}
990EXPORT_SYMBOL(sas_port_add);
991
992/**
993 * sas_port_free - free a SAS PORT
994 * @port: SAS PORT to free
995 *
996 * Frees the specified SAS PORT.
997 *
998 * Note:
999 * This function must only be called on a PORT that has not
1000 * successfully been added using sas_port_add().
1001 */
1002void sas_port_free(struct sas_port *port)
1003{
1004 transport_destroy_device(&port->dev);
1005 put_device(&port->dev);
1006}
1007EXPORT_SYMBOL(sas_port_free);
1008
1009/**
1010 * sas_port_delete - remove SAS PORT
1011 * @port: SAS PORT to remove
1012 *
1013 * Removes the specified SAS PORT. If the SAS PORT has an
1014 * associated phys, unlink them from the port as well.
1015 */
1016void sas_port_delete(struct sas_port *port)
1017{
1018 struct device *dev = &port->dev;
1019 struct sas_phy *phy, *tmp_phy;
1020
1021 if (port->rphy) {
1022 sas_rphy_delete(port->rphy);
1023 port->rphy = NULL;
1024 }
1025
1026 mutex_lock(&port->phy_list_mutex);
1027 list_for_each_entry_safe(phy, tmp_phy, &port->phy_list,
1028 port_siblings) {
1029 sas_port_delete_link(port, phy);
1030 list_del_init(&phy->port_siblings);
1031 }
1032 mutex_unlock(&port->phy_list_mutex);
1033
1034 if (port->is_backlink) {
1035 struct device *parent = port->dev.parent;
1036
1037 sysfs_remove_link(&port->dev.kobj, dev_name(parent));
1038 port->is_backlink = 0;
1039 }
1040
1041 transport_remove_device(dev);
1042 device_del(dev);
1043 transport_destroy_device(dev);
1044 put_device(dev);
1045}
1046EXPORT_SYMBOL(sas_port_delete);
1047
1048/**
1049 * scsi_is_sas_port - check if a struct device represents a SAS port
1050 * @dev: device to check
1051 *
1052 * Returns:
1053 * %1 if the device represents a SAS Port, %0 else
1054 */
1055int scsi_is_sas_port(const struct device *dev)
1056{
1057 return dev->release == sas_port_release;
1058}
1059EXPORT_SYMBOL(scsi_is_sas_port);
1060
1061/**
1062 * sas_port_get_phy - try to take a reference on a port member
1063 * @port: port to check
1064 */
1065struct sas_phy *sas_port_get_phy(struct sas_port *port)
1066{
1067 struct sas_phy *phy;
1068
1069 mutex_lock(&port->phy_list_mutex);
1070 if (list_empty(&port->phy_list))
1071 phy = NULL;
1072 else {
1073 struct list_head *ent = port->phy_list.next;
1074
1075 phy = list_entry(ent, typeof(*phy), port_siblings);
1076 get_device(&phy->dev);
1077 }
1078 mutex_unlock(&port->phy_list_mutex);
1079
1080 return phy;
1081}
1082EXPORT_SYMBOL(sas_port_get_phy);
1083
1084/**
1085 * sas_port_add_phy - add another phy to a port to form a wide port
1086 * @port: port to add the phy to
1087 * @phy: phy to add
1088 *
1089 * When a port is initially created, it is empty (has no phys). All
1090 * ports must have at least one phy to operated, and all wide ports
1091 * must have at least two. The current code makes no difference
1092 * between ports and wide ports, but the only object that can be
1093 * connected to a remote device is a port, so ports must be formed on
1094 * all devices with phys if they're connected to anything.
1095 */
1096void sas_port_add_phy(struct sas_port *port, struct sas_phy *phy)
1097{
1098 mutex_lock(&port->phy_list_mutex);
1099 if (unlikely(!list_empty(&phy->port_siblings))) {
1100 /* make sure we're already on this port */
1101 struct sas_phy *tmp;
1102
1103 list_for_each_entry(tmp, &port->phy_list, port_siblings)
1104 if (tmp == phy)
1105 break;
1106 /* If this trips, you added a phy that was already
1107 * part of a different port */
1108 if (unlikely(tmp != phy)) {
1109 dev_printk(KERN_ERR, &port->dev, "trying to add phy %s fails: it's already part of another port\n",
1110 dev_name(&phy->dev));
1111 BUG();
1112 }
1113 } else {
1114 sas_port_create_link(port, phy);
1115 list_add_tail(&phy->port_siblings, &port->phy_list);
1116 port->num_phys++;
1117 }
1118 mutex_unlock(&port->phy_list_mutex);
1119}
1120EXPORT_SYMBOL(sas_port_add_phy);
1121
1122/**
1123 * sas_port_delete_phy - remove a phy from a port or wide port
1124 * @port: port to remove the phy from
1125 * @phy: phy to remove
1126 *
1127 * This operation is used for tearing down ports again. It must be
1128 * done to every port or wide port before calling sas_port_delete.
1129 */
1130void sas_port_delete_phy(struct sas_port *port, struct sas_phy *phy)
1131{
1132 mutex_lock(&port->phy_list_mutex);
1133 sas_port_delete_link(port, phy);
1134 list_del_init(&phy->port_siblings);
1135 port->num_phys--;
1136 mutex_unlock(&port->phy_list_mutex);
1137}
1138EXPORT_SYMBOL(sas_port_delete_phy);
1139
1140void sas_port_mark_backlink(struct sas_port *port)
1141{
1142 int res;
1143 struct device *parent = port->dev.parent->parent->parent;
1144
1145 if (port->is_backlink)
1146 return;
1147 port->is_backlink = 1;
1148 res = sysfs_create_link(&port->dev.kobj, &parent->kobj,
1149 dev_name(parent));
1150 if (res)
1151 goto err;
1152 return;
1153err:
1154 printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n",
1155 __func__, res);
1156
1157}
1158EXPORT_SYMBOL(sas_port_mark_backlink);
1159
1160/*
1161 * SAS remote PHY attributes.
1162 */
1163
1164#define sas_rphy_show_simple(field, name, format_string, cast) \
1165static ssize_t \
1166show_sas_rphy_##name(struct device *dev, \
1167 struct device_attribute *attr, char *buf) \
1168{ \
1169 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1170 \
1171 return snprintf(buf, 20, format_string, cast rphy->field); \
1172}
1173
1174#define sas_rphy_simple_attr(field, name, format_string, type) \
1175 sas_rphy_show_simple(field, name, format_string, (type)) \
1176static SAS_DEVICE_ATTR(rphy, name, S_IRUGO, \
1177 show_sas_rphy_##name, NULL)
1178
1179#define sas_rphy_show_protocol(field, name) \
1180static ssize_t \
1181show_sas_rphy_##name(struct device *dev, \
1182 struct device_attribute *attr, char *buf) \
1183{ \
1184 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1185 \
1186 if (!rphy->field) \
1187 return snprintf(buf, 20, "none\n"); \
1188 return get_sas_protocol_names(rphy->field, buf); \
1189}
1190
1191#define sas_rphy_protocol_attr(field, name) \
1192 sas_rphy_show_protocol(field, name) \
1193static SAS_DEVICE_ATTR(rphy, name, S_IRUGO, \
1194 show_sas_rphy_##name, NULL)
1195
1196static ssize_t
1197show_sas_rphy_device_type(struct device *dev,
1198 struct device_attribute *attr, char *buf)
1199{
1200 struct sas_rphy *rphy = transport_class_to_rphy(dev);
1201
1202 if (!rphy->identify.device_type)
1203 return snprintf(buf, 20, "none\n");
1204 return get_sas_device_type_names(
1205 rphy->identify.device_type, buf);
1206}
1207
1208static SAS_DEVICE_ATTR(rphy, device_type, S_IRUGO,
1209 show_sas_rphy_device_type, NULL);
1210
1211static ssize_t
1212show_sas_rphy_enclosure_identifier(struct device *dev,
1213 struct device_attribute *attr, char *buf)
1214{
1215 struct sas_rphy *rphy = transport_class_to_rphy(dev);
1216 struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
1217 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
1218 struct sas_internal *i = to_sas_internal(shost->transportt);
1219 u64 identifier;
1220 int error;
1221
1222 error = i->f->get_enclosure_identifier(rphy, &identifier);
1223 if (error)
1224 return error;
1225 return sprintf(buf, "0x%llx\n", (unsigned long long)identifier);
1226}
1227
1228static SAS_DEVICE_ATTR(rphy, enclosure_identifier, S_IRUGO,
1229 show_sas_rphy_enclosure_identifier, NULL);
1230
1231static ssize_t
1232show_sas_rphy_bay_identifier(struct device *dev,
1233 struct device_attribute *attr, char *buf)
1234{
1235 struct sas_rphy *rphy = transport_class_to_rphy(dev);
1236 struct sas_phy *phy = dev_to_phy(rphy->dev.parent);
1237 struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
1238 struct sas_internal *i = to_sas_internal(shost->transportt);
1239 int val;
1240
1241 val = i->f->get_bay_identifier(rphy);
1242 if (val < 0)
1243 return val;
1244 return sprintf(buf, "%d\n", val);
1245}
1246
1247static SAS_DEVICE_ATTR(rphy, bay_identifier, S_IRUGO,
1248 show_sas_rphy_bay_identifier, NULL);
1249
1250sas_rphy_protocol_attr(identify.initiator_port_protocols,
1251 initiator_port_protocols);
1252sas_rphy_protocol_attr(identify.target_port_protocols, target_port_protocols);
1253sas_rphy_simple_attr(identify.sas_address, sas_address, "0x%016llx\n",
1254 unsigned long long);
1255sas_rphy_simple_attr(identify.phy_identifier, phy_identifier, "%d\n", u8);
1256sas_rphy_simple_attr(scsi_target_id, scsi_target_id, "%d\n", u32);
1257
1258/* only need 8 bytes of data plus header (4 or 8) */
1259#define BUF_SIZE 64
1260
1261int sas_read_port_mode_page(struct scsi_device *sdev)
1262{
1263 char *buffer = kzalloc(BUF_SIZE, GFP_KERNEL), *msdata;
1264 struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
1265 struct scsi_mode_data mode_data;
1266 int error;
1267
1268 if (!buffer)
1269 return -ENOMEM;
1270
1271 error = scsi_mode_sense(sdev, 1, 0x19, 0, buffer, BUF_SIZE, 30*HZ, 3,
1272 &mode_data, NULL);
1273
1274 if (error)
1275 goto out;
1276
1277 msdata = buffer + mode_data.header_length +
1278 mode_data.block_descriptor_length;
1279
1280 if (msdata - buffer > BUF_SIZE - 8)
1281 goto out;
1282
1283 error = 0;
1284
1285 rdev->ready_led_meaning = msdata[2] & 0x10 ? 1 : 0;
1286 rdev->I_T_nexus_loss_timeout = (msdata[4] << 8) + msdata[5];
1287 rdev->initiator_response_timeout = (msdata[6] << 8) + msdata[7];
1288
1289 out:
1290 kfree(buffer);
1291 return error;
1292}
1293EXPORT_SYMBOL(sas_read_port_mode_page);
1294
1295static DECLARE_TRANSPORT_CLASS(sas_end_dev_class,
1296 "sas_end_device", NULL, NULL, NULL);
1297
1298#define sas_end_dev_show_simple(field, name, format_string, cast) \
1299static ssize_t \
1300show_sas_end_dev_##name(struct device *dev, \
1301 struct device_attribute *attr, char *buf) \
1302{ \
1303 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1304 struct sas_end_device *rdev = rphy_to_end_device(rphy); \
1305 \
1306 return snprintf(buf, 20, format_string, cast rdev->field); \
1307}
1308
1309#define sas_end_dev_simple_attr(field, name, format_string, type) \
1310 sas_end_dev_show_simple(field, name, format_string, (type)) \
1311static SAS_DEVICE_ATTR(end_dev, name, S_IRUGO, \
1312 show_sas_end_dev_##name, NULL)
1313
1314sas_end_dev_simple_attr(ready_led_meaning, ready_led_meaning, "%d\n", int);
1315sas_end_dev_simple_attr(I_T_nexus_loss_timeout, I_T_nexus_loss_timeout,
1316 "%d\n", int);
1317sas_end_dev_simple_attr(initiator_response_timeout, initiator_response_timeout,
1318 "%d\n", int);
1319sas_end_dev_simple_attr(tlr_supported, tlr_supported,
1320 "%d\n", int);
1321sas_end_dev_simple_attr(tlr_enabled, tlr_enabled,
1322 "%d\n", int);
1323
1324static DECLARE_TRANSPORT_CLASS(sas_expander_class,
1325 "sas_expander", NULL, NULL, NULL);
1326
1327#define sas_expander_show_simple(field, name, format_string, cast) \
1328static ssize_t \
1329show_sas_expander_##name(struct device *dev, \
1330 struct device_attribute *attr, char *buf) \
1331{ \
1332 struct sas_rphy *rphy = transport_class_to_rphy(dev); \
1333 struct sas_expander_device *edev = rphy_to_expander_device(rphy); \
1334 \
1335 return snprintf(buf, 20, format_string, cast edev->field); \
1336}
1337
1338#define sas_expander_simple_attr(field, name, format_string, type) \
1339 sas_expander_show_simple(field, name, format_string, (type)) \
1340static SAS_DEVICE_ATTR(expander, name, S_IRUGO, \
1341 show_sas_expander_##name, NULL)
1342
1343sas_expander_simple_attr(vendor_id, vendor_id, "%s\n", char *);
1344sas_expander_simple_attr(product_id, product_id, "%s\n", char *);
1345sas_expander_simple_attr(product_rev, product_rev, "%s\n", char *);
1346sas_expander_simple_attr(component_vendor_id, component_vendor_id,
1347 "%s\n", char *);
1348sas_expander_simple_attr(component_id, component_id, "%u\n", unsigned int);
1349sas_expander_simple_attr(component_revision_id, component_revision_id, "%u\n",
1350 unsigned int);
1351sas_expander_simple_attr(level, level, "%d\n", int);
1352
1353static DECLARE_TRANSPORT_CLASS(sas_rphy_class,
1354 "sas_device", NULL, NULL, NULL);
1355
1356static int sas_rphy_match(struct attribute_container *cont, struct device *dev)
1357{
1358 struct Scsi_Host *shost;
1359 struct sas_internal *i;
1360
1361 if (!scsi_is_sas_rphy(dev))
1362 return 0;
1363 shost = dev_to_shost(dev->parent->parent);
1364
1365 if (!shost->transportt)
1366 return 0;
1367 if (shost->transportt->host_attrs.ac.class !=
1368 &sas_host_class.class)
1369 return 0;
1370
1371 i = to_sas_internal(shost->transportt);
1372 return &i->rphy_attr_cont.ac == cont;
1373}
1374
1375static int sas_end_dev_match(struct attribute_container *cont,
1376 struct device *dev)
1377{
1378 struct Scsi_Host *shost;
1379 struct sas_internal *i;
1380 struct sas_rphy *rphy;
1381
1382 if (!scsi_is_sas_rphy(dev))
1383 return 0;
1384 shost = dev_to_shost(dev->parent->parent);
1385 rphy = dev_to_rphy(dev);
1386
1387 if (!shost->transportt)
1388 return 0;
1389 if (shost->transportt->host_attrs.ac.class !=
1390 &sas_host_class.class)
1391 return 0;
1392
1393 i = to_sas_internal(shost->transportt);
1394 return &i->end_dev_attr_cont.ac == cont &&
1395 rphy->identify.device_type == SAS_END_DEVICE;
1396}
1397
1398static int sas_expander_match(struct attribute_container *cont,
1399 struct device *dev)
1400{
1401 struct Scsi_Host *shost;
1402 struct sas_internal *i;
1403 struct sas_rphy *rphy;
1404
1405 if (!scsi_is_sas_rphy(dev))
1406 return 0;
1407 shost = dev_to_shost(dev->parent->parent);
1408 rphy = dev_to_rphy(dev);
1409
1410 if (!shost->transportt)
1411 return 0;
1412 if (shost->transportt->host_attrs.ac.class !=
1413 &sas_host_class.class)
1414 return 0;
1415
1416 i = to_sas_internal(shost->transportt);
1417 return &i->expander_attr_cont.ac == cont &&
1418 (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE ||
1419 rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE);
1420}
1421
1422static void sas_expander_release(struct device *dev)
1423{
1424 struct sas_rphy *rphy = dev_to_rphy(dev);
1425 struct sas_expander_device *edev = rphy_to_expander_device(rphy);
1426
1427 put_device(dev->parent);
1428 kfree(edev);
1429}
1430
1431static void sas_end_device_release(struct device *dev)
1432{
1433 struct sas_rphy *rphy = dev_to_rphy(dev);
1434 struct sas_end_device *edev = rphy_to_end_device(rphy);
1435
1436 put_device(dev->parent);
1437 kfree(edev);
1438}
1439
1440/**
1441 * sas_rphy_initialize - common rphy initialization
1442 * @rphy: rphy to initialise
1443 *
1444 * Used by both sas_end_device_alloc() and sas_expander_alloc() to
1445 * initialise the common rphy component of each.
1446 */
1447static void sas_rphy_initialize(struct sas_rphy *rphy)
1448{
1449 INIT_LIST_HEAD(&rphy->list);
1450}
1451
1452/**
1453 * sas_end_device_alloc - allocate an rphy for an end device
1454 * @parent: which port
1455 *
1456 * Allocates an SAS remote PHY structure, connected to @parent.
1457 *
1458 * Returns:
1459 * SAS PHY allocated or %NULL if the allocation failed.
1460 */
1461struct sas_rphy *sas_end_device_alloc(struct sas_port *parent)
1462{
1463 struct Scsi_Host *shost = dev_to_shost(&parent->dev);
1464 struct sas_end_device *rdev;
1465
1466 rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
1467 if (!rdev) {
1468 return NULL;
1469 }
1470
1471 device_initialize(&rdev->rphy.dev);
1472 rdev->rphy.dev.parent = get_device(&parent->dev);
1473 rdev->rphy.dev.release = sas_end_device_release;
1474 if (scsi_is_sas_expander_device(parent->dev.parent)) {
1475 struct sas_rphy *rphy = dev_to_rphy(parent->dev.parent);
1476 dev_set_name(&rdev->rphy.dev, "end_device-%d:%d:%d",
1477 shost->host_no, rphy->scsi_target_id,
1478 parent->port_identifier);
1479 } else
1480 dev_set_name(&rdev->rphy.dev, "end_device-%d:%d",
1481 shost->host_no, parent->port_identifier);
1482 rdev->rphy.identify.device_type = SAS_END_DEVICE;
1483 sas_rphy_initialize(&rdev->rphy);
1484 transport_setup_device(&rdev->rphy.dev);
1485
1486 return &rdev->rphy;
1487}
1488EXPORT_SYMBOL(sas_end_device_alloc);
1489
1490/**
1491 * sas_expander_alloc - allocate an rphy for an end device
1492 * @parent: which port
1493 * @type: SAS_EDGE_EXPANDER_DEVICE or SAS_FANOUT_EXPANDER_DEVICE
1494 *
1495 * Allocates an SAS remote PHY structure, connected to @parent.
1496 *
1497 * Returns:
1498 * SAS PHY allocated or %NULL if the allocation failed.
1499 */
1500struct sas_rphy *sas_expander_alloc(struct sas_port *parent,
1501 enum sas_device_type type)
1502{
1503 struct Scsi_Host *shost = dev_to_shost(&parent->dev);
1504 struct sas_expander_device *rdev;
1505 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1506
1507 BUG_ON(type != SAS_EDGE_EXPANDER_DEVICE &&
1508 type != SAS_FANOUT_EXPANDER_DEVICE);
1509
1510 rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
1511 if (!rdev) {
1512 return NULL;
1513 }
1514
1515 device_initialize(&rdev->rphy.dev);
1516 rdev->rphy.dev.parent = get_device(&parent->dev);
1517 rdev->rphy.dev.release = sas_expander_release;
1518 mutex_lock(&sas_host->lock);
1519 rdev->rphy.scsi_target_id = sas_host->next_expander_id++;
1520 mutex_unlock(&sas_host->lock);
1521 dev_set_name(&rdev->rphy.dev, "expander-%d:%d",
1522 shost->host_no, rdev->rphy.scsi_target_id);
1523 rdev->rphy.identify.device_type = type;
1524 sas_rphy_initialize(&rdev->rphy);
1525 transport_setup_device(&rdev->rphy.dev);
1526
1527 return &rdev->rphy;
1528}
1529EXPORT_SYMBOL(sas_expander_alloc);
1530
1531/**
1532 * sas_rphy_add - add a SAS remote PHY to the device hierarchy
1533 * @rphy: The remote PHY to be added
1534 *
1535 * Publishes a SAS remote PHY to the rest of the system.
1536 */
1537int sas_rphy_add(struct sas_rphy *rphy)
1538{
1539 struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
1540 struct Scsi_Host *shost = dev_to_shost(parent->dev.parent);
1541 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1542 struct sas_identify *identify = &rphy->identify;
1543 int error;
1544
1545 if (parent->rphy)
1546 return -ENXIO;
1547 parent->rphy = rphy;
1548
1549 error = device_add(&rphy->dev);
1550 if (error)
1551 return error;
1552 transport_add_device(&rphy->dev);
1553 transport_configure_device(&rphy->dev);
1554 if (sas_bsg_initialize(shost, rphy))
1555 printk("fail to a bsg device %s\n", dev_name(&rphy->dev));
1556
1557
1558 mutex_lock(&sas_host->lock);
1559 list_add_tail(&rphy->list, &sas_host->rphy_list);
1560 if (identify->device_type == SAS_END_DEVICE &&
1561 (identify->target_port_protocols &
1562 (SAS_PROTOCOL_SSP | SAS_PROTOCOL_STP | SAS_PROTOCOL_SATA)))
1563 rphy->scsi_target_id = sas_host->next_target_id++;
1564 else if (identify->device_type == SAS_END_DEVICE)
1565 rphy->scsi_target_id = -1;
1566 mutex_unlock(&sas_host->lock);
1567
1568 if (identify->device_type == SAS_END_DEVICE &&
1569 rphy->scsi_target_id != -1) {
1570 int lun;
1571
1572 if (identify->target_port_protocols & SAS_PROTOCOL_SSP)
1573 lun = SCAN_WILD_CARD;
1574 else
1575 lun = 0;
1576
1577 scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id, lun,
1578 SCSI_SCAN_INITIAL);
1579 }
1580
1581 return 0;
1582}
1583EXPORT_SYMBOL(sas_rphy_add);
1584
1585/**
1586 * sas_rphy_free - free a SAS remote PHY
1587 * @rphy: SAS remote PHY to free
1588 *
1589 * Frees the specified SAS remote PHY.
1590 *
1591 * Note:
1592 * This function must only be called on a remote
1593 * PHY that has not successfully been added using
1594 * sas_rphy_add() (or has been sas_rphy_remove()'d)
1595 */
1596void sas_rphy_free(struct sas_rphy *rphy)
1597{
1598 struct device *dev = &rphy->dev;
1599 struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
1600 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1601
1602 mutex_lock(&sas_host->lock);
1603 list_del(&rphy->list);
1604 mutex_unlock(&sas_host->lock);
1605
1606 transport_destroy_device(dev);
1607
1608 put_device(dev);
1609}
1610EXPORT_SYMBOL(sas_rphy_free);
1611
1612/**
1613 * sas_rphy_delete - remove and free SAS remote PHY
1614 * @rphy: SAS remote PHY to remove and free
1615 *
1616 * Removes the specified SAS remote PHY and frees it.
1617 */
1618void
1619sas_rphy_delete(struct sas_rphy *rphy)
1620{
1621 sas_rphy_remove(rphy);
1622 sas_rphy_free(rphy);
1623}
1624EXPORT_SYMBOL(sas_rphy_delete);
1625
1626/**
1627 * sas_rphy_unlink - unlink SAS remote PHY
1628 * @rphy: SAS remote phy to unlink from its parent port
1629 *
1630 * Removes port reference to an rphy
1631 */
1632void sas_rphy_unlink(struct sas_rphy *rphy)
1633{
1634 struct sas_port *parent = dev_to_sas_port(rphy->dev.parent);
1635
1636 parent->rphy = NULL;
1637}
1638EXPORT_SYMBOL(sas_rphy_unlink);
1639
1640/**
1641 * sas_rphy_remove - remove SAS remote PHY
1642 * @rphy: SAS remote phy to remove
1643 *
1644 * Removes the specified SAS remote PHY.
1645 */
1646void
1647sas_rphy_remove(struct sas_rphy *rphy)
1648{
1649 struct device *dev = &rphy->dev;
1650
1651 switch (rphy->identify.device_type) {
1652 case SAS_END_DEVICE:
1653 scsi_remove_target(dev);
1654 break;
1655 case SAS_EDGE_EXPANDER_DEVICE:
1656 case SAS_FANOUT_EXPANDER_DEVICE:
1657 sas_remove_children(dev);
1658 break;
1659 default:
1660 break;
1661 }
1662
1663 sas_rphy_unlink(rphy);
1664 bsg_remove_queue(rphy->q);
1665 transport_remove_device(dev);
1666 device_del(dev);
1667}
1668EXPORT_SYMBOL(sas_rphy_remove);
1669
1670/**
1671 * scsi_is_sas_rphy - check if a struct device represents a SAS remote PHY
1672 * @dev: device to check
1673 *
1674 * Returns:
1675 * %1 if the device represents a SAS remote PHY, %0 else
1676 */
1677int scsi_is_sas_rphy(const struct device *dev)
1678{
1679 return dev->release == sas_end_device_release ||
1680 dev->release == sas_expander_release;
1681}
1682EXPORT_SYMBOL(scsi_is_sas_rphy);
1683
1684
1685/*
1686 * SCSI scan helper
1687 */
1688
1689static int sas_user_scan(struct Scsi_Host *shost, uint channel,
1690 uint id, u64 lun)
1691{
1692 struct sas_host_attrs *sas_host = to_sas_host_attrs(shost);
1693 struct sas_rphy *rphy;
1694
1695 mutex_lock(&sas_host->lock);
1696 list_for_each_entry(rphy, &sas_host->rphy_list, list) {
1697 if (rphy->identify.device_type != SAS_END_DEVICE ||
1698 rphy->scsi_target_id == -1)
1699 continue;
1700
1701 if ((channel == SCAN_WILD_CARD || channel == 0) &&
1702 (id == SCAN_WILD_CARD || id == rphy->scsi_target_id)) {
1703 scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id,
1704 lun, SCSI_SCAN_MANUAL);
1705 }
1706 }
1707 mutex_unlock(&sas_host->lock);
1708
1709 return 0;
1710}
1711
1712
1713/*
1714 * Setup / Teardown code
1715 */
1716
1717#define SETUP_TEMPLATE(attrb, field, perm, test) \
1718 i->private_##attrb[count] = dev_attr_##field; \
1719 i->private_##attrb[count].attr.mode = perm; \
1720 i->attrb[count] = &i->private_##attrb[count]; \
1721 if (test) \
1722 count++
1723
1724#define SETUP_TEMPLATE_RW(attrb, field, perm, test, ro_test, ro_perm) \
1725 i->private_##attrb[count] = dev_attr_##field; \
1726 i->private_##attrb[count].attr.mode = perm; \
1727 if (ro_test) { \
1728 i->private_##attrb[count].attr.mode = ro_perm; \
1729 i->private_##attrb[count].store = NULL; \
1730 } \
1731 i->attrb[count] = &i->private_##attrb[count]; \
1732 if (test) \
1733 count++
1734
1735#define SETUP_RPORT_ATTRIBUTE(field) \
1736 SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, 1)
1737
1738#define SETUP_OPTIONAL_RPORT_ATTRIBUTE(field, func) \
1739 SETUP_TEMPLATE(rphy_attrs, field, S_IRUGO, i->f->func)
1740
1741#define SETUP_PHY_ATTRIBUTE(field) \
1742 SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, 1)
1743
1744#define SETUP_PHY_ATTRIBUTE_RW(field) \
1745 SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
1746 !i->f->set_phy_speed, S_IRUGO)
1747
1748#define SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(field, func) \
1749 SETUP_TEMPLATE_RW(phy_attrs, field, S_IRUGO | S_IWUSR, 1, \
1750 !i->f->func, S_IRUGO)
1751
1752#define SETUP_PORT_ATTRIBUTE(field) \
1753 SETUP_TEMPLATE(port_attrs, field, S_IRUGO, 1)
1754
1755#define SETUP_OPTIONAL_PHY_ATTRIBUTE(field, func) \
1756 SETUP_TEMPLATE(phy_attrs, field, S_IRUGO, i->f->func)
1757
1758#define SETUP_PHY_ATTRIBUTE_WRONLY(field) \
1759 SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, 1)
1760
1761#define SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(field, func) \
1762 SETUP_TEMPLATE(phy_attrs, field, S_IWUSR, i->f->func)
1763
1764#define SETUP_END_DEV_ATTRIBUTE(field) \
1765 SETUP_TEMPLATE(end_dev_attrs, field, S_IRUGO, 1)
1766
1767#define SETUP_EXPANDER_ATTRIBUTE(field) \
1768 SETUP_TEMPLATE(expander_attrs, expander_##field, S_IRUGO, 1)
1769
1770/**
1771 * sas_attach_transport - instantiate SAS transport template
1772 * @ft: SAS transport class function template
1773 */
1774struct scsi_transport_template *
1775sas_attach_transport(struct sas_function_template *ft)
1776{
1777 struct sas_internal *i;
1778 int count;
1779
1780 i = kzalloc(sizeof(struct sas_internal), GFP_KERNEL);
1781 if (!i)
1782 return NULL;
1783
1784 i->t.user_scan = sas_user_scan;
1785
1786 i->t.host_attrs.ac.attrs = &i->host_attrs[0];
1787 i->t.host_attrs.ac.class = &sas_host_class.class;
1788 i->t.host_attrs.ac.match = sas_host_match;
1789 transport_container_register(&i->t.host_attrs);
1790 i->t.host_size = sizeof(struct sas_host_attrs);
1791
1792 i->phy_attr_cont.ac.class = &sas_phy_class.class;
1793 i->phy_attr_cont.ac.attrs = &i->phy_attrs[0];
1794 i->phy_attr_cont.ac.match = sas_phy_match;
1795 transport_container_register(&i->phy_attr_cont);
1796
1797 i->port_attr_cont.ac.class = &sas_port_class.class;
1798 i->port_attr_cont.ac.attrs = &i->port_attrs[0];
1799 i->port_attr_cont.ac.match = sas_port_match;
1800 transport_container_register(&i->port_attr_cont);
1801
1802 i->rphy_attr_cont.ac.class = &sas_rphy_class.class;
1803 i->rphy_attr_cont.ac.attrs = &i->rphy_attrs[0];
1804 i->rphy_attr_cont.ac.match = sas_rphy_match;
1805 transport_container_register(&i->rphy_attr_cont);
1806
1807 i->end_dev_attr_cont.ac.class = &sas_end_dev_class.class;
1808 i->end_dev_attr_cont.ac.attrs = &i->end_dev_attrs[0];
1809 i->end_dev_attr_cont.ac.match = sas_end_dev_match;
1810 transport_container_register(&i->end_dev_attr_cont);
1811
1812 i->expander_attr_cont.ac.class = &sas_expander_class.class;
1813 i->expander_attr_cont.ac.attrs = &i->expander_attrs[0];
1814 i->expander_attr_cont.ac.match = sas_expander_match;
1815 transport_container_register(&i->expander_attr_cont);
1816
1817 i->f = ft;
1818
1819 count = 0;
1820 SETUP_PHY_ATTRIBUTE(initiator_port_protocols);
1821 SETUP_PHY_ATTRIBUTE(target_port_protocols);
1822 SETUP_PHY_ATTRIBUTE(device_type);
1823 SETUP_PHY_ATTRIBUTE(sas_address);
1824 SETUP_PHY_ATTRIBUTE(phy_identifier);
1825 SETUP_PHY_ATTRIBUTE(negotiated_linkrate);
1826 SETUP_PHY_ATTRIBUTE(minimum_linkrate_hw);
1827 SETUP_PHY_ATTRIBUTE_RW(minimum_linkrate);
1828 SETUP_PHY_ATTRIBUTE(maximum_linkrate_hw);
1829 SETUP_PHY_ATTRIBUTE_RW(maximum_linkrate);
1830
1831 SETUP_PHY_ATTRIBUTE(invalid_dword_count);
1832 SETUP_PHY_ATTRIBUTE(running_disparity_error_count);
1833 SETUP_PHY_ATTRIBUTE(loss_of_dword_sync_count);
1834 SETUP_PHY_ATTRIBUTE(phy_reset_problem_count);
1835 SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(link_reset, phy_reset);
1836 SETUP_OPTIONAL_PHY_ATTRIBUTE_WRONLY(hard_reset, phy_reset);
1837 SETUP_OPTIONAL_PHY_ATTRIBUTE_RW(enable, phy_enable);
1838 i->phy_attrs[count] = NULL;
1839
1840 count = 0;
1841 SETUP_PORT_ATTRIBUTE(num_phys);
1842 i->port_attrs[count] = NULL;
1843
1844 count = 0;
1845 SETUP_RPORT_ATTRIBUTE(rphy_initiator_port_protocols);
1846 SETUP_RPORT_ATTRIBUTE(rphy_target_port_protocols);
1847 SETUP_RPORT_ATTRIBUTE(rphy_device_type);
1848 SETUP_RPORT_ATTRIBUTE(rphy_sas_address);
1849 SETUP_RPORT_ATTRIBUTE(rphy_phy_identifier);
1850 SETUP_RPORT_ATTRIBUTE(rphy_scsi_target_id);
1851 SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_enclosure_identifier,
1852 get_enclosure_identifier);
1853 SETUP_OPTIONAL_RPORT_ATTRIBUTE(rphy_bay_identifier,
1854 get_bay_identifier);
1855 i->rphy_attrs[count] = NULL;
1856
1857 count = 0;
1858 SETUP_END_DEV_ATTRIBUTE(end_dev_ready_led_meaning);
1859 SETUP_END_DEV_ATTRIBUTE(end_dev_I_T_nexus_loss_timeout);
1860 SETUP_END_DEV_ATTRIBUTE(end_dev_initiator_response_timeout);
1861 SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_supported);
1862 SETUP_END_DEV_ATTRIBUTE(end_dev_tlr_enabled);
1863 i->end_dev_attrs[count] = NULL;
1864
1865 count = 0;
1866 SETUP_EXPANDER_ATTRIBUTE(vendor_id);
1867 SETUP_EXPANDER_ATTRIBUTE(product_id);
1868 SETUP_EXPANDER_ATTRIBUTE(product_rev);
1869 SETUP_EXPANDER_ATTRIBUTE(component_vendor_id);
1870 SETUP_EXPANDER_ATTRIBUTE(component_id);
1871 SETUP_EXPANDER_ATTRIBUTE(component_revision_id);
1872 SETUP_EXPANDER_ATTRIBUTE(level);
1873 i->expander_attrs[count] = NULL;
1874
1875 return &i->t;
1876}
1877EXPORT_SYMBOL(sas_attach_transport);
1878
1879/**
1880 * sas_release_transport - release SAS transport template instance
1881 * @t: transport template instance
1882 */
1883void sas_release_transport(struct scsi_transport_template *t)
1884{
1885 struct sas_internal *i = to_sas_internal(t);
1886
1887 transport_container_unregister(&i->t.host_attrs);
1888 transport_container_unregister(&i->phy_attr_cont);
1889 transport_container_unregister(&i->port_attr_cont);
1890 transport_container_unregister(&i->rphy_attr_cont);
1891 transport_container_unregister(&i->end_dev_attr_cont);
1892 transport_container_unregister(&i->expander_attr_cont);
1893
1894 kfree(i);
1895}
1896EXPORT_SYMBOL(sas_release_transport);
1897
1898static __init int sas_transport_init(void)
1899{
1900 int error;
1901
1902 error = transport_class_register(&sas_host_class);
1903 if (error)
1904 goto out;
1905 error = transport_class_register(&sas_phy_class);
1906 if (error)
1907 goto out_unregister_transport;
1908 error = transport_class_register(&sas_port_class);
1909 if (error)
1910 goto out_unregister_phy;
1911 error = transport_class_register(&sas_rphy_class);
1912 if (error)
1913 goto out_unregister_port;
1914 error = transport_class_register(&sas_end_dev_class);
1915 if (error)
1916 goto out_unregister_rphy;
1917 error = transport_class_register(&sas_expander_class);
1918 if (error)
1919 goto out_unregister_end_dev;
1920
1921 return 0;
1922
1923 out_unregister_end_dev:
1924 transport_class_unregister(&sas_end_dev_class);
1925 out_unregister_rphy:
1926 transport_class_unregister(&sas_rphy_class);
1927 out_unregister_port:
1928 transport_class_unregister(&sas_port_class);
1929 out_unregister_phy:
1930 transport_class_unregister(&sas_phy_class);
1931 out_unregister_transport:
1932 transport_class_unregister(&sas_host_class);
1933 out:
1934 return error;
1935
1936}
1937
1938static void __exit sas_transport_exit(void)
1939{
1940 transport_class_unregister(&sas_host_class);
1941 transport_class_unregister(&sas_phy_class);
1942 transport_class_unregister(&sas_port_class);
1943 transport_class_unregister(&sas_rphy_class);
1944 transport_class_unregister(&sas_end_dev_class);
1945 transport_class_unregister(&sas_expander_class);
1946}
1947
1948MODULE_AUTHOR("Christoph Hellwig");
1949MODULE_DESCRIPTION("SAS Transport Attributes");
1950MODULE_LICENSE("GPL");
1951
1952module_init(sas_transport_init);
1953module_exit(sas_transport_exit);