Loading...
1/*
2
3 Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
4
5 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
6
7 This program is free software; you may redistribute and/or modify it under
8 the terms of the GNU General Public License Version 2 as published by the
9 Free Software Foundation.
10
11 This program is distributed in the hope that it will be useful, but
12 WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
13 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 for complete details.
15
16 The author respectfully requests that any modifications to this software be
17 sent directly to him for evaluation and testing.
18
19 Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
20 advice has been invaluable, to David Gentzel, for writing the original Linux
21 BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
22
23 Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
24 Manager available as freely redistributable source code.
25
26*/
27
28#ifndef _BUSLOGIC_H
29#define _BUSLOGIC_H
30
31
32#ifndef PACKED
33#define PACKED __attribute__((packed))
34#endif
35
36/*
37 Define the maximum number of BusLogic Host Adapters supported by this driver.
38*/
39
40#define BusLogic_MaxHostAdapters 16
41
42
43/*
44 Define the maximum number of Target Devices supported by this driver.
45*/
46
47#define BusLogic_MaxTargetDevices 16
48
49
50/*
51 Define the maximum number of Scatter/Gather Segments used by this driver.
52 For optimal performance, it is important that this limit be at least as
53 large as the largest single request generated by the I/O Subsystem.
54*/
55
56#define BusLogic_ScatterGatherLimit 128
57
58
59/*
60 Define the maximum, maximum automatic, minimum automatic, and default Queue
61 Depth to allow for Target Devices depending on whether or not they support
62 Tagged Queuing and whether or not ISA Bounce Buffers are required.
63*/
64
65#define BusLogic_MaxTaggedQueueDepth 64
66#define BusLogic_MaxAutomaticTaggedQueueDepth 28
67#define BusLogic_MinAutomaticTaggedQueueDepth 7
68#define BusLogic_TaggedQueueDepthBB 3
69#define BusLogic_UntaggedQueueDepth 3
70#define BusLogic_UntaggedQueueDepthBB 2
71
72
73/*
74 Define the default amount of time in seconds to wait between a Host Adapter
75 Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands.
76 Some SCSI devices get confused if they receive SCSI commands too soon after
77 a SCSI Bus Reset.
78*/
79
80#define BusLogic_DefaultBusSettleTime 2
81
82
83/*
84 Define the maximum number of Mailboxes that should be used for MultiMaster
85 Host Adapters. This number is chosen to be larger than the maximum Host
86 Adapter Queue Depth and small enough so that the Host Adapter structure
87 does not cross an allocation block size boundary.
88*/
89
90#define BusLogic_MaxMailboxes 211
91
92
93/*
94 Define the number of CCBs that should be allocated as a group to optimize
95 Kernel memory allocation.
96*/
97
98#define BusLogic_CCB_AllocationGroupSize 7
99
100
101/*
102 Define the Host Adapter Line and Message Buffer Sizes.
103*/
104
105#define BusLogic_LineBufferSize 100
106#define BusLogic_MessageBufferSize 9700
107
108
109/*
110 Define the Driver Message Levels.
111*/
112
113enum BusLogic_MessageLevel {
114 BusLogic_AnnounceLevel = 0,
115 BusLogic_InfoLevel = 1,
116 BusLogic_NoticeLevel = 2,
117 BusLogic_WarningLevel = 3,
118 BusLogic_ErrorLevel = 4
119};
120
121static char *BusLogic_MessageLevelMap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
122
123
124/*
125 Define Driver Message macros.
126*/
127
128#define BusLogic_Announce(Format, Arguments...) \
129 BusLogic_Message(BusLogic_AnnounceLevel, Format, ##Arguments)
130
131#define BusLogic_Info(Format, Arguments...) \
132 BusLogic_Message(BusLogic_InfoLevel, Format, ##Arguments)
133
134#define BusLogic_Notice(Format, Arguments...) \
135 BusLogic_Message(BusLogic_NoticeLevel, Format, ##Arguments)
136
137#define BusLogic_Warning(Format, Arguments...) \
138 BusLogic_Message(BusLogic_WarningLevel, Format, ##Arguments)
139
140#define BusLogic_Error(Format, Arguments...) \
141 BusLogic_Message(BusLogic_ErrorLevel, Format, ##Arguments)
142
143
144/*
145 Define the types of BusLogic Host Adapters that are supported and the number
146 of I/O Addresses required by each type.
147*/
148
149enum BusLogic_HostAdapterType {
150 BusLogic_MultiMaster = 1,
151 BusLogic_FlashPoint = 2
152} PACKED;
153
154#define BusLogic_MultiMasterAddressCount 4
155#define BusLogic_FlashPointAddressCount 256
156
157static int BusLogic_HostAdapterAddressCount[3] = { 0, BusLogic_MultiMasterAddressCount, BusLogic_FlashPointAddressCount };
158
159
160/*
161 Define macros for testing the Host Adapter Type.
162*/
163
164#ifdef CONFIG_SCSI_FLASHPOINT
165
166#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
167 (HostAdapter->HostAdapterType == BusLogic_MultiMaster)
168
169#define BusLogic_FlashPointHostAdapterP(HostAdapter) \
170 (HostAdapter->HostAdapterType == BusLogic_FlashPoint)
171
172#else
173
174#define BusLogic_MultiMasterHostAdapterP(HostAdapter) \
175 (true)
176
177#define BusLogic_FlashPointHostAdapterP(HostAdapter) \
178 (false)
179
180#endif
181
182
183/*
184 Define the possible Host Adapter Bus Types.
185*/
186
187enum BusLogic_HostAdapterBusType {
188 BusLogic_Unknown_Bus = 0,
189 BusLogic_ISA_Bus = 1,
190 BusLogic_EISA_Bus = 2,
191 BusLogic_PCI_Bus = 3,
192 BusLogic_VESA_Bus = 4,
193 BusLogic_MCA_Bus = 5
194} PACKED;
195
196static char *BusLogic_HostAdapterBusNames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" };
197
198static enum BusLogic_HostAdapterBusType BusLogic_HostAdapterBusTypes[] = {
199 BusLogic_VESA_Bus, /* BT-4xx */
200 BusLogic_ISA_Bus, /* BT-5xx */
201 BusLogic_MCA_Bus, /* BT-6xx */
202 BusLogic_EISA_Bus, /* BT-7xx */
203 BusLogic_Unknown_Bus, /* BT-8xx */
204 BusLogic_PCI_Bus /* BT-9xx */
205};
206
207/*
208 Define the possible Host Adapter BIOS Disk Geometry Translations.
209*/
210
211enum BusLogic_BIOS_DiskGeometryTranslation {
212 BusLogic_BIOS_Disk_Not_Installed = 0,
213 BusLogic_BIOS_Disk_Installed_64x32 = 1,
214 BusLogic_BIOS_Disk_Installed_128x32 = 2,
215 BusLogic_BIOS_Disk_Installed_255x63 = 3
216} PACKED;
217
218
219/*
220 Define a 10^18 Statistics Byte Counter data type.
221*/
222
223struct BusLogic_ByteCounter {
224 unsigned int Units;
225 unsigned int Billions;
226};
227
228
229/*
230 Define the structure for I/O Address and Bus Probing Information.
231*/
232
233struct BusLogic_ProbeInfo {
234 enum BusLogic_HostAdapterType HostAdapterType;
235 enum BusLogic_HostAdapterBusType HostAdapterBusType;
236 unsigned long IO_Address;
237 unsigned long PCI_Address;
238 struct pci_dev *PCI_Device;
239 unsigned char Bus;
240 unsigned char Device;
241 unsigned char IRQ_Channel;
242};
243
244/*
245 Define the Probe Options.
246*/
247
248struct BusLogic_ProbeOptions {
249 bool NoProbe:1; /* Bit 0 */
250 bool NoProbeISA:1; /* Bit 1 */
251 bool NoProbePCI:1; /* Bit 2 */
252 bool NoSortPCI:1; /* Bit 3 */
253 bool MultiMasterFirst:1;/* Bit 4 */
254 bool FlashPointFirst:1; /* Bit 5 */
255 bool LimitedProbeISA:1; /* Bit 6 */
256 bool Probe330:1; /* Bit 7 */
257 bool Probe334:1; /* Bit 8 */
258 bool Probe230:1; /* Bit 9 */
259 bool Probe234:1; /* Bit 10 */
260 bool Probe130:1; /* Bit 11 */
261 bool Probe134:1; /* Bit 12 */
262};
263
264/*
265 Define the Global Options.
266*/
267
268struct BusLogic_GlobalOptions {
269 bool TraceProbe:1; /* Bit 0 */
270 bool TraceHardwareReset:1; /* Bit 1 */
271 bool TraceConfiguration:1; /* Bit 2 */
272 bool TraceErrors:1; /* Bit 3 */
273};
274
275/*
276 Define the Local Options.
277*/
278
279struct BusLogic_LocalOptions {
280 bool InhibitTargetInquiry:1; /* Bit 0 */
281};
282
283/*
284 Define the BusLogic SCSI Host Adapter I/O Register Offsets.
285*/
286
287#define BusLogic_ControlRegisterOffset 0 /* WO register */
288#define BusLogic_StatusRegisterOffset 0 /* RO register */
289#define BusLogic_CommandParameterRegisterOffset 1 /* WO register */
290#define BusLogic_DataInRegisterOffset 1 /* RO register */
291#define BusLogic_InterruptRegisterOffset 2 /* RO register */
292#define BusLogic_GeometryRegisterOffset 3 /* RO register */
293
294/*
295 Define the structure of the write-only Control Register.
296*/
297
298union BusLogic_ControlRegister {
299 unsigned char All;
300 struct {
301 unsigned char:4; /* Bits 0-3 */
302 bool SCSIBusReset:1; /* Bit 4 */
303 bool InterruptReset:1; /* Bit 5 */
304 bool SoftReset:1; /* Bit 6 */
305 bool HardReset:1; /* Bit 7 */
306 } cr;
307};
308
309/*
310 Define the structure of the read-only Status Register.
311*/
312
313union BusLogic_StatusRegister {
314 unsigned char All;
315 struct {
316 bool CommandInvalid:1; /* Bit 0 */
317 bool Reserved:1; /* Bit 1 */
318 bool DataInRegisterReady:1; /* Bit 2 */
319 bool CommandParameterRegisterBusy:1; /* Bit 3 */
320 bool HostAdapterReady:1; /* Bit 4 */
321 bool InitializationRequired:1; /* Bit 5 */
322 bool DiagnosticFailure:1; /* Bit 6 */
323 bool DiagnosticActive:1; /* Bit 7 */
324 } sr;
325};
326
327/*
328 Define the structure of the read-only Interrupt Register.
329*/
330
331union BusLogic_InterruptRegister {
332 unsigned char All;
333 struct {
334 bool IncomingMailboxLoaded:1; /* Bit 0 */
335 bool OutgoingMailboxAvailable:1;/* Bit 1 */
336 bool CommandComplete:1; /* Bit 2 */
337 bool ExternalBusReset:1; /* Bit 3 */
338 unsigned char Reserved:3; /* Bits 4-6 */
339 bool InterruptValid:1; /* Bit 7 */
340 } ir;
341};
342
343/*
344 Define the structure of the read-only Geometry Register.
345*/
346
347union BusLogic_GeometryRegister {
348 unsigned char All;
349 struct {
350 enum BusLogic_BIOS_DiskGeometryTranslation Drive0Geometry:2; /* Bits 0-1 */
351 enum BusLogic_BIOS_DiskGeometryTranslation Drive1Geometry:2; /* Bits 2-3 */
352 unsigned char:3; /* Bits 4-6 */
353 bool ExtendedTranslationEnabled:1; /* Bit 7 */
354 } gr;
355};
356
357/*
358 Define the BusLogic SCSI Host Adapter Command Register Operation Codes.
359*/
360
361enum BusLogic_OperationCode {
362 BusLogic_TestCommandCompleteInterrupt = 0x00,
363 BusLogic_InitializeMailbox = 0x01,
364 BusLogic_ExecuteMailboxCommand = 0x02,
365 BusLogic_ExecuteBIOSCommand = 0x03,
366 BusLogic_InquireBoardID = 0x04,
367 BusLogic_EnableOutgoingMailboxAvailableInt = 0x05,
368 BusLogic_SetSCSISelectionTimeout = 0x06,
369 BusLogic_SetPreemptTimeOnBus = 0x07,
370 BusLogic_SetTimeOffBus = 0x08,
371 BusLogic_SetBusTransferRate = 0x09,
372 BusLogic_InquireInstalledDevicesID0to7 = 0x0A,
373 BusLogic_InquireConfiguration = 0x0B,
374 BusLogic_EnableTargetMode = 0x0C,
375 BusLogic_InquireSetupInformation = 0x0D,
376 BusLogic_WriteAdapterLocalRAM = 0x1A,
377 BusLogic_ReadAdapterLocalRAM = 0x1B,
378 BusLogic_WriteBusMasterChipFIFO = 0x1C,
379 BusLogic_ReadBusMasterChipFIFO = 0x1D,
380 BusLogic_EchoCommandData = 0x1F,
381 BusLogic_HostAdapterDiagnostic = 0x20,
382 BusLogic_SetAdapterOptions = 0x21,
383 BusLogic_InquireInstalledDevicesID8to15 = 0x23,
384 BusLogic_InquireTargetDevices = 0x24,
385 BusLogic_DisableHostAdapterInterrupt = 0x25,
386 BusLogic_InitializeExtendedMailbox = 0x81,
387 BusLogic_ExecuteSCSICommand = 0x83,
388 BusLogic_InquireFirmwareVersion3rdDigit = 0x84,
389 BusLogic_InquireFirmwareVersionLetter = 0x85,
390 BusLogic_InquirePCIHostAdapterInformation = 0x86,
391 BusLogic_InquireHostAdapterModelNumber = 0x8B,
392 BusLogic_InquireSynchronousPeriod = 0x8C,
393 BusLogic_InquireExtendedSetupInformation = 0x8D,
394 BusLogic_EnableStrictRoundRobinMode = 0x8F,
395 BusLogic_StoreHostAdapterLocalRAM = 0x90,
396 BusLogic_FetchHostAdapterLocalRAM = 0x91,
397 BusLogic_StoreLocalDataInEEPROM = 0x92,
398 BusLogic_UploadAutoSCSICode = 0x94,
399 BusLogic_ModifyIOAddress = 0x95,
400 BusLogic_SetCCBFormat = 0x96,
401 BusLogic_WriteInquiryBuffer = 0x9A,
402 BusLogic_ReadInquiryBuffer = 0x9B,
403 BusLogic_FlashROMUploadDownload = 0xA7,
404 BusLogic_ReadSCAMData = 0xA8,
405 BusLogic_WriteSCAMData = 0xA9
406};
407
408/*
409 Define the Inquire Board ID reply structure.
410*/
411
412struct BusLogic_BoardID {
413 unsigned char BoardType; /* Byte 0 */
414 unsigned char CustomFeatures; /* Byte 1 */
415 unsigned char FirmwareVersion1stDigit; /* Byte 2 */
416 unsigned char FirmwareVersion2ndDigit; /* Byte 3 */
417};
418
419/*
420 Define the Inquire Configuration reply structure.
421*/
422
423struct BusLogic_Configuration {
424 unsigned char:5; /* Byte 0 Bits 0-4 */
425 bool DMA_Channel5:1; /* Byte 0 Bit 5 */
426 bool DMA_Channel6:1; /* Byte 0 Bit 6 */
427 bool DMA_Channel7:1; /* Byte 0 Bit 7 */
428 bool IRQ_Channel9:1; /* Byte 1 Bit 0 */
429 bool IRQ_Channel10:1; /* Byte 1 Bit 1 */
430 bool IRQ_Channel11:1; /* Byte 1 Bit 2 */
431 bool IRQ_Channel12:1; /* Byte 1 Bit 3 */
432 unsigned char:1; /* Byte 1 Bit 4 */
433 bool IRQ_Channel14:1; /* Byte 1 Bit 5 */
434 bool IRQ_Channel15:1; /* Byte 1 Bit 6 */
435 unsigned char:1; /* Byte 1 Bit 7 */
436 unsigned char HostAdapterID:4; /* Byte 2 Bits 0-3 */
437 unsigned char:4; /* Byte 2 Bits 4-7 */
438};
439
440/*
441 Define the Inquire Setup Information reply structure.
442*/
443
444struct BusLogic_SynchronousValue {
445 unsigned char Offset:4; /* Bits 0-3 */
446 unsigned char TransferPeriod:3; /* Bits 4-6 */
447 bool Synchronous:1; /* Bit 7 */
448};
449
450struct BusLogic_SetupInformation {
451 bool SynchronousInitiationEnabled:1; /* Byte 0 Bit 0 */
452 bool ParityCheckingEnabled:1; /* Byte 0 Bit 1 */
453 unsigned char:6; /* Byte 0 Bits 2-7 */
454 unsigned char BusTransferRate; /* Byte 1 */
455 unsigned char PreemptTimeOnBus; /* Byte 2 */
456 unsigned char TimeOffBus; /* Byte 3 */
457 unsigned char MailboxCount; /* Byte 4 */
458 unsigned char MailboxAddress[3]; /* Bytes 5-7 */
459 struct BusLogic_SynchronousValue SynchronousValuesID0to7[8]; /* Bytes 8-15 */
460 unsigned char DisconnectPermittedID0to7; /* Byte 16 */
461 unsigned char Signature; /* Byte 17 */
462 unsigned char CharacterD; /* Byte 18 */
463 unsigned char HostBusType; /* Byte 19 */
464 unsigned char WideTransfersPermittedID0to7; /* Byte 20 */
465 unsigned char WideTransfersActiveID0to7; /* Byte 21 */
466 struct BusLogic_SynchronousValue SynchronousValuesID8to15[8]; /* Bytes 22-29 */
467 unsigned char DisconnectPermittedID8to15; /* Byte 30 */
468 unsigned char:8; /* Byte 31 */
469 unsigned char WideTransfersPermittedID8to15; /* Byte 32 */
470 unsigned char WideTransfersActiveID8to15; /* Byte 33 */
471};
472
473/*
474 Define the Initialize Extended Mailbox request structure.
475*/
476
477struct BusLogic_ExtendedMailboxRequest {
478 unsigned char MailboxCount; /* Byte 0 */
479 u32 BaseMailboxAddress; /* Bytes 1-4 */
480} PACKED;
481
482
483/*
484 Define the Inquire PCI Host Adapter Information reply type. The ISA
485 Compatible I/O Port values are defined here and are also used with
486 the Modify I/O Address command.
487*/
488
489enum BusLogic_ISACompatibleIOPort {
490 BusLogic_IO_330 = 0,
491 BusLogic_IO_334 = 1,
492 BusLogic_IO_230 = 2,
493 BusLogic_IO_234 = 3,
494 BusLogic_IO_130 = 4,
495 BusLogic_IO_134 = 5,
496 BusLogic_IO_Disable = 6,
497 BusLogic_IO_Disable2 = 7
498} PACKED;
499
500struct BusLogic_PCIHostAdapterInformation {
501 enum BusLogic_ISACompatibleIOPort ISACompatibleIOPort; /* Byte 0 */
502 unsigned char PCIAssignedIRQChannel; /* Byte 1 */
503 bool LowByteTerminated:1; /* Byte 2 Bit 0 */
504 bool HighByteTerminated:1; /* Byte 2 Bit 1 */
505 unsigned char:2; /* Byte 2 Bits 2-3 */
506 bool JP1:1; /* Byte 2 Bit 4 */
507 bool JP2:1; /* Byte 2 Bit 5 */
508 bool JP3:1; /* Byte 2 Bit 6 */
509 bool GenericInfoValid:1;/* Byte 2 Bit 7 */
510 unsigned char:8; /* Byte 3 */
511};
512
513/*
514 Define the Inquire Extended Setup Information reply structure.
515*/
516
517struct BusLogic_ExtendedSetupInformation {
518 unsigned char BusType; /* Byte 0 */
519 unsigned char BIOS_Address; /* Byte 1 */
520 unsigned short ScatterGatherLimit; /* Bytes 2-3 */
521 unsigned char MailboxCount; /* Byte 4 */
522 u32 BaseMailboxAddress; /* Bytes 5-8 */
523 struct {
524 unsigned char:2; /* Byte 9 Bits 0-1 */
525 bool FastOnEISA:1; /* Byte 9 Bit 2 */
526 unsigned char:3; /* Byte 9 Bits 3-5 */
527 bool LevelSensitiveInterrupt:1; /* Byte 9 Bit 6 */
528 unsigned char:1; /* Byte 9 Bit 7 */
529 } Misc;
530 unsigned char FirmwareRevision[3]; /* Bytes 10-12 */
531 bool HostWideSCSI:1; /* Byte 13 Bit 0 */
532 bool HostDifferentialSCSI:1; /* Byte 13 Bit 1 */
533 bool HostSupportsSCAM:1; /* Byte 13 Bit 2 */
534 bool HostUltraSCSI:1; /* Byte 13 Bit 3 */
535 bool HostSmartTermination:1; /* Byte 13 Bit 4 */
536 unsigned char:3; /* Byte 13 Bits 5-7 */
537} PACKED;
538
539/*
540 Define the Enable Strict Round Robin Mode request type.
541*/
542
543enum BusLogic_RoundRobinModeRequest {
544 BusLogic_AggressiveRoundRobinMode = 0,
545 BusLogic_StrictRoundRobinMode = 1
546} PACKED;
547
548
549/*
550 Define the Fetch Host Adapter Local RAM request type.
551*/
552
553#define BusLogic_BIOS_BaseOffset 0
554#define BusLogic_AutoSCSI_BaseOffset 64
555
556struct BusLogic_FetchHostAdapterLocalRAMRequest {
557 unsigned char ByteOffset; /* Byte 0 */
558 unsigned char ByteCount; /* Byte 1 */
559};
560
561/*
562 Define the Host Adapter Local RAM AutoSCSI structure.
563*/
564
565struct BusLogic_AutoSCSIData {
566 unsigned char InternalFactorySignature[2]; /* Bytes 0-1 */
567 unsigned char InformationByteCount; /* Byte 2 */
568 unsigned char HostAdapterType[6]; /* Bytes 3-8 */
569 unsigned char:8; /* Byte 9 */
570 bool FloppyEnabled:1; /* Byte 10 Bit 0 */
571 bool FloppySecondary:1; /* Byte 10 Bit 1 */
572 bool LevelSensitiveInterrupt:1; /* Byte 10 Bit 2 */
573 unsigned char:2; /* Byte 10 Bits 3-4 */
574 unsigned char SystemRAMAreaForBIOS:3; /* Byte 10 Bits 5-7 */
575 unsigned char DMA_Channel:7; /* Byte 11 Bits 0-6 */
576 bool DMA_AutoConfiguration:1; /* Byte 11 Bit 7 */
577 unsigned char IRQ_Channel:7; /* Byte 12 Bits 0-6 */
578 bool IRQ_AutoConfiguration:1; /* Byte 12 Bit 7 */
579 unsigned char DMA_TransferRate; /* Byte 13 */
580 unsigned char SCSI_ID; /* Byte 14 */
581 bool LowByteTerminated:1; /* Byte 15 Bit 0 */
582 bool ParityCheckingEnabled:1; /* Byte 15 Bit 1 */
583 bool HighByteTerminated:1; /* Byte 15 Bit 2 */
584 bool NoisyCablingEnvironment:1; /* Byte 15 Bit 3 */
585 bool FastSynchronousNegotiation:1; /* Byte 15 Bit 4 */
586 bool BusResetEnabled:1; /* Byte 15 Bit 5 */
587 bool:1; /* Byte 15 Bit 6 */
588 bool ActiveNegationEnabled:1; /* Byte 15 Bit 7 */
589 unsigned char BusOnDelay; /* Byte 16 */
590 unsigned char BusOffDelay; /* Byte 17 */
591 bool HostAdapterBIOSEnabled:1; /* Byte 18 Bit 0 */
592 bool BIOSRedirectionOfINT19Enabled:1; /* Byte 18 Bit 1 */
593 bool ExtendedTranslationEnabled:1; /* Byte 18 Bit 2 */
594 bool MapRemovableAsFixedEnabled:1; /* Byte 18 Bit 3 */
595 bool:1; /* Byte 18 Bit 4 */
596 bool BIOSSupportsMoreThan2DrivesEnabled:1; /* Byte 18 Bit 5 */
597 bool BIOSInterruptModeEnabled:1; /* Byte 18 Bit 6 */
598 bool FlopticalSupportEnabled:1; /* Byte 19 Bit 7 */
599 unsigned short DeviceEnabled; /* Bytes 19-20 */
600 unsigned short WidePermitted; /* Bytes 21-22 */
601 unsigned short FastPermitted; /* Bytes 23-24 */
602 unsigned short SynchronousPermitted; /* Bytes 25-26 */
603 unsigned short DisconnectPermitted; /* Bytes 27-28 */
604 unsigned short SendStartUnitCommand; /* Bytes 29-30 */
605 unsigned short IgnoreInBIOSScan; /* Bytes 31-32 */
606 unsigned char PCIInterruptPin:2; /* Byte 33 Bits 0-1 */
607 unsigned char HostAdapterIOPortAddress:2; /* Byte 33 Bits 2-3 */
608 bool StrictRoundRobinModeEnabled:1; /* Byte 33 Bit 4 */
609 bool VESABusSpeedGreaterThan33MHz:1; /* Byte 33 Bit 5 */
610 bool VESABurstWriteEnabled:1; /* Byte 33 Bit 6 */
611 bool VESABurstReadEnabled:1; /* Byte 33 Bit 7 */
612 unsigned short UltraPermitted; /* Bytes 34-35 */
613 unsigned int:32; /* Bytes 36-39 */
614 unsigned char:8; /* Byte 40 */
615 unsigned char AutoSCSIMaximumLUN; /* Byte 41 */
616 bool:1; /* Byte 42 Bit 0 */
617 bool SCAM_Dominant:1; /* Byte 42 Bit 1 */
618 bool SCAM_Enabled:1; /* Byte 42 Bit 2 */
619 bool SCAM_Level2:1; /* Byte 42 Bit 3 */
620 unsigned char:4; /* Byte 42 Bits 4-7 */
621 bool INT13ExtensionEnabled:1; /* Byte 43 Bit 0 */
622 bool:1; /* Byte 43 Bit 1 */
623 bool CDROMBootEnabled:1; /* Byte 43 Bit 2 */
624 unsigned char:5; /* Byte 43 Bits 3-7 */
625 unsigned char BootTargetID:4; /* Byte 44 Bits 0-3 */
626 unsigned char BootChannel:4; /* Byte 44 Bits 4-7 */
627 unsigned char ForceBusDeviceScanningOrder:1; /* Byte 45 Bit 0 */
628 unsigned char:7; /* Byte 45 Bits 1-7 */
629 unsigned short NonTaggedToAlternateLUNPermitted; /* Bytes 46-47 */
630 unsigned short RenegotiateSyncAfterCheckCondition; /* Bytes 48-49 */
631 unsigned char Reserved[10]; /* Bytes 50-59 */
632 unsigned char ManufacturingDiagnostic[2]; /* Bytes 60-61 */
633 unsigned short Checksum; /* Bytes 62-63 */
634} PACKED;
635
636/*
637 Define the Host Adapter Local RAM Auto SCSI Byte 45 structure.
638*/
639
640struct BusLogic_AutoSCSIByte45 {
641 unsigned char ForceBusDeviceScanningOrder:1; /* Bit 0 */
642 unsigned char:7; /* Bits 1-7 */
643};
644
645/*
646 Define the Host Adapter Local RAM BIOS Drive Map Byte structure.
647*/
648
649#define BusLogic_BIOS_DriveMapOffset 17
650
651struct BusLogic_BIOSDriveMapByte {
652 unsigned char TargetIDBit3:1; /* Bit 0 */
653 unsigned char:2; /* Bits 1-2 */
654 enum BusLogic_BIOS_DiskGeometryTranslation DiskGeometry:2; /* Bits 3-4 */
655 unsigned char TargetID:3; /* Bits 5-7 */
656};
657
658/*
659 Define the Set CCB Format request type. Extended LUN Format CCBs are
660 necessary to support more than 8 Logical Units per Target Device.
661*/
662
663enum BusLogic_SetCCBFormatRequest {
664 BusLogic_LegacyLUNFormatCCB = 0,
665 BusLogic_ExtendedLUNFormatCCB = 1
666} PACKED;
667
668/*
669 Define the Outgoing Mailbox Action Codes.
670*/
671
672enum BusLogic_ActionCode {
673 BusLogic_OutgoingMailboxFree = 0x00,
674 BusLogic_MailboxStartCommand = 0x01,
675 BusLogic_MailboxAbortCommand = 0x02
676} PACKED;
677
678
679/*
680 Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware
681 only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so
682 completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5.
683*/
684
685enum BusLogic_CompletionCode {
686 BusLogic_IncomingMailboxFree = 0x00,
687 BusLogic_CommandCompletedWithoutError = 0x01,
688 BusLogic_CommandAbortedAtHostRequest = 0x02,
689 BusLogic_AbortedCommandNotFound = 0x03,
690 BusLogic_CommandCompletedWithError = 0x04,
691 BusLogic_InvalidCCB = 0x05
692} PACKED;
693
694/*
695 Define the Command Control Block (CCB) Opcodes.
696*/
697
698enum BusLogic_CCB_Opcode {
699 BusLogic_InitiatorCCB = 0x00,
700 BusLogic_TargetCCB = 0x01,
701 BusLogic_InitiatorCCB_ScatterGather = 0x02,
702 BusLogic_InitiatorCCB_ResidualDataLength = 0x03,
703 BusLogic_InitiatorCCB_ScatterGatherResidual = 0x04,
704 BusLogic_BusDeviceReset = 0x81
705} PACKED;
706
707
708/*
709 Define the CCB Data Direction Codes.
710*/
711
712enum BusLogic_DataDirection {
713 BusLogic_UncheckedDataTransfer = 0,
714 BusLogic_DataInLengthChecked = 1,
715 BusLogic_DataOutLengthChecked = 2,
716 BusLogic_NoDataTransfer = 3
717};
718
719
720/*
721 Define the Host Adapter Status Codes. The MultiMaster Firmware does not
722 return status code 0x0C; it uses 0x12 for both overruns and underruns.
723*/
724
725enum BusLogic_HostAdapterStatus {
726 BusLogic_CommandCompletedNormally = 0x00,
727 BusLogic_LinkedCommandCompleted = 0x0A,
728 BusLogic_LinkedCommandCompletedWithFlag = 0x0B,
729 BusLogic_DataUnderRun = 0x0C,
730 BusLogic_SCSISelectionTimeout = 0x11,
731 BusLogic_DataOverRun = 0x12,
732 BusLogic_UnexpectedBusFree = 0x13,
733 BusLogic_InvalidBusPhaseRequested = 0x14,
734 BusLogic_InvalidOutgoingMailboxActionCode = 0x15,
735 BusLogic_InvalidCommandOperationCode = 0x16,
736 BusLogic_LinkedCCBhasInvalidLUN = 0x17,
737 BusLogic_InvalidCommandParameter = 0x1A,
738 BusLogic_AutoRequestSenseFailed = 0x1B,
739 BusLogic_TaggedQueuingMessageRejected = 0x1C,
740 BusLogic_UnsupportedMessageReceived = 0x1D,
741 BusLogic_HostAdapterHardwareFailed = 0x20,
742 BusLogic_TargetFailedResponseToATN = 0x21,
743 BusLogic_HostAdapterAssertedRST = 0x22,
744 BusLogic_OtherDeviceAssertedRST = 0x23,
745 BusLogic_TargetDeviceReconnectedImproperly = 0x24,
746 BusLogic_HostAdapterAssertedBusDeviceReset = 0x25,
747 BusLogic_AbortQueueGenerated = 0x26,
748 BusLogic_HostAdapterSoftwareError = 0x27,
749 BusLogic_HostAdapterHardwareTimeoutError = 0x30,
750 BusLogic_SCSIParityErrorDetected = 0x34
751} PACKED;
752
753
754/*
755 Define the SCSI Target Device Status Codes.
756*/
757
758enum BusLogic_TargetDeviceStatus {
759 BusLogic_OperationGood = 0x00,
760 BusLogic_CheckCondition = 0x02,
761 BusLogic_DeviceBusy = 0x08
762} PACKED;
763
764/*
765 Define the Queue Tag Codes.
766*/
767
768enum BusLogic_QueueTag {
769 BusLogic_SimpleQueueTag = 0,
770 BusLogic_HeadOfQueueTag = 1,
771 BusLogic_OrderedQueueTag = 2,
772 BusLogic_ReservedQT = 3
773};
774
775/*
776 Define the SCSI Command Descriptor Block (CDB).
777*/
778
779#define BusLogic_CDB_MaxLength 12
780
781typedef unsigned char SCSI_CDB_T[BusLogic_CDB_MaxLength];
782
783
784/*
785 Define the Scatter/Gather Segment structure required by the MultiMaster
786 Firmware Interface and the FlashPoint SCCB Manager.
787*/
788
789struct BusLogic_ScatterGatherSegment {
790 u32 SegmentByteCount; /* Bytes 0-3 */
791 u32 SegmentDataPointer; /* Bytes 4-7 */
792};
793
794/*
795 Define the Driver CCB Status Codes.
796*/
797
798enum BusLogic_CCB_Status {
799 BusLogic_CCB_Free = 0,
800 BusLogic_CCB_Active = 1,
801 BusLogic_CCB_Completed = 2,
802 BusLogic_CCB_Reset = 3
803} PACKED;
804
805
806/*
807 Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40
808 bytes are defined by and common to both the MultiMaster Firmware and the
809 FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint
810 SCCB Manager. The remaining components are defined by the Linux BusLogic
811 Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode
812 CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to
813 byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory,
814 Extended LUN Format CCBs can support up to 64 Logical Units, but in practice
815 many devices will respond improperly to Logical Units between 32 and 63, and
816 the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs
817 are used by recent versions of the MultiMaster Firmware, as well as by the
818 FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical
819 Units. Since 64 Logical Units are unlikely to be needed in practice, and
820 since they are problematic for the above reasons, and since limiting them to
821 5 bits simplifies the CCB structure definition, this driver only supports
822 32 Logical Units per Target Device.
823*/
824
825struct BusLogic_CCB {
826 /*
827 MultiMaster Firmware and FlashPoint SCCB Manager Common Portion.
828 */
829 enum BusLogic_CCB_Opcode Opcode; /* Byte 0 */
830 unsigned char:3; /* Byte 1 Bits 0-2 */
831 enum BusLogic_DataDirection DataDirection:2; /* Byte 1 Bits 3-4 */
832 bool TagEnable:1; /* Byte 1 Bit 5 */
833 enum BusLogic_QueueTag QueueTag:2; /* Byte 1 Bits 6-7 */
834 unsigned char CDB_Length; /* Byte 2 */
835 unsigned char SenseDataLength; /* Byte 3 */
836 u32 DataLength; /* Bytes 4-7 */
837 u32 DataPointer; /* Bytes 8-11 */
838 unsigned char:8; /* Byte 12 */
839 unsigned char:8; /* Byte 13 */
840 enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 14 */
841 enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 15 */
842 unsigned char TargetID; /* Byte 16 */
843 unsigned char LogicalUnit:5; /* Byte 17 Bits 0-4 */
844 bool LegacyTagEnable:1; /* Byte 17 Bit 5 */
845 enum BusLogic_QueueTag LegacyQueueTag:2; /* Byte 17 Bits 6-7 */
846 SCSI_CDB_T CDB; /* Bytes 18-29 */
847 unsigned char:8; /* Byte 30 */
848 unsigned char:8; /* Byte 31 */
849 unsigned int:32; /* Bytes 32-35 */
850 u32 SenseDataPointer; /* Bytes 36-39 */
851 /*
852 FlashPoint SCCB Manager Defined Portion.
853 */
854 void (*CallbackFunction) (struct BusLogic_CCB *); /* Bytes 40-43 */
855 u32 BaseAddress; /* Bytes 44-47 */
856 enum BusLogic_CompletionCode CompletionCode; /* Byte 48 */
857#ifdef CONFIG_SCSI_FLASHPOINT
858 unsigned char:8; /* Byte 49 */
859 unsigned short OS_Flags; /* Bytes 50-51 */
860 unsigned char Private[48]; /* Bytes 52-99 */
861#endif
862 /*
863 BusLogic Linux Driver Defined Portion.
864 */
865 dma_addr_t AllocationGroupHead;
866 unsigned int AllocationGroupSize;
867 u32 DMA_Handle;
868 enum BusLogic_CCB_Status Status;
869 unsigned long SerialNumber;
870 struct scsi_cmnd *Command;
871 struct BusLogic_HostAdapter *HostAdapter;
872 struct BusLogic_CCB *Next;
873 struct BusLogic_CCB *NextAll;
874 struct BusLogic_ScatterGatherSegment
875 ScatterGatherList[BusLogic_ScatterGatherLimit];
876};
877
878/*
879 Define the 32 Bit Mode Outgoing Mailbox structure.
880*/
881
882struct BusLogic_OutgoingMailbox {
883 u32 CCB; /* Bytes 0-3 */
884 unsigned int:24; /* Bytes 4-6 */
885 enum BusLogic_ActionCode ActionCode; /* Byte 7 */
886};
887
888/*
889 Define the 32 Bit Mode Incoming Mailbox structure.
890*/
891
892struct BusLogic_IncomingMailbox {
893 u32 CCB; /* Bytes 0-3 */
894 enum BusLogic_HostAdapterStatus HostAdapterStatus; /* Byte 4 */
895 enum BusLogic_TargetDeviceStatus TargetDeviceStatus; /* Byte 5 */
896 unsigned char:8; /* Byte 6 */
897 enum BusLogic_CompletionCode CompletionCode; /* Byte 7 */
898};
899
900
901/*
902 Define the BusLogic Driver Options structure.
903*/
904
905struct BusLogic_DriverOptions {
906 unsigned short TaggedQueuingPermitted;
907 unsigned short TaggedQueuingPermittedMask;
908 unsigned short BusSettleTime;
909 struct BusLogic_LocalOptions LocalOptions;
910 unsigned char CommonQueueDepth;
911 unsigned char QueueDepth[BusLogic_MaxTargetDevices];
912};
913
914/*
915 Define the Host Adapter Target Flags structure.
916*/
917
918struct BusLogic_TargetFlags {
919 bool TargetExists:1;
920 bool TaggedQueuingSupported:1;
921 bool WideTransfersSupported:1;
922 bool TaggedQueuingActive:1;
923 bool WideTransfersActive:1;
924 bool CommandSuccessfulFlag:1;
925 bool TargetInfoReported:1;
926};
927
928/*
929 Define the Host Adapter Target Statistics structure.
930*/
931
932#define BusLogic_SizeBuckets 10
933
934typedef unsigned int BusLogic_CommandSizeBuckets_T[BusLogic_SizeBuckets];
935
936struct BusLogic_TargetStatistics {
937 unsigned int CommandsAttempted;
938 unsigned int CommandsCompleted;
939 unsigned int ReadCommands;
940 unsigned int WriteCommands;
941 struct BusLogic_ByteCounter TotalBytesRead;
942 struct BusLogic_ByteCounter TotalBytesWritten;
943 BusLogic_CommandSizeBuckets_T ReadCommandSizeBuckets;
944 BusLogic_CommandSizeBuckets_T WriteCommandSizeBuckets;
945 unsigned short CommandAbortsRequested;
946 unsigned short CommandAbortsAttempted;
947 unsigned short CommandAbortsCompleted;
948 unsigned short BusDeviceResetsRequested;
949 unsigned short BusDeviceResetsAttempted;
950 unsigned short BusDeviceResetsCompleted;
951 unsigned short HostAdapterResetsRequested;
952 unsigned short HostAdapterResetsAttempted;
953 unsigned short HostAdapterResetsCompleted;
954};
955
956/*
957 Define the FlashPoint Card Handle data type.
958*/
959
960#define FlashPoint_BadCardHandle 0xFFFFFFFF
961
962typedef unsigned int FlashPoint_CardHandle_T;
963
964
965/*
966 Define the FlashPoint Information structure. This structure is defined
967 by the FlashPoint SCCB Manager.
968*/
969
970struct FlashPoint_Info {
971 u32 BaseAddress; /* Bytes 0-3 */
972 bool Present; /* Byte 4 */
973 unsigned char IRQ_Channel; /* Byte 5 */
974 unsigned char SCSI_ID; /* Byte 6 */
975 unsigned char SCSI_LUN; /* Byte 7 */
976 unsigned short FirmwareRevision; /* Bytes 8-9 */
977 unsigned short SynchronousPermitted; /* Bytes 10-11 */
978 unsigned short FastPermitted; /* Bytes 12-13 */
979 unsigned short UltraPermitted; /* Bytes 14-15 */
980 unsigned short DisconnectPermitted; /* Bytes 16-17 */
981 unsigned short WidePermitted; /* Bytes 18-19 */
982 bool ParityCheckingEnabled:1; /* Byte 20 Bit 0 */
983 bool HostWideSCSI:1; /* Byte 20 Bit 1 */
984 bool HostSoftReset:1; /* Byte 20 Bit 2 */
985 bool ExtendedTranslationEnabled:1; /* Byte 20 Bit 3 */
986 bool LowByteTerminated:1; /* Byte 20 Bit 4 */
987 bool HighByteTerminated:1; /* Byte 20 Bit 5 */
988 bool ReportDataUnderrun:1; /* Byte 20 Bit 6 */
989 bool SCAM_Enabled:1; /* Byte 20 Bit 7 */
990 bool SCAM_Level2:1; /* Byte 21 Bit 0 */
991 unsigned char:7; /* Byte 21 Bits 1-7 */
992 unsigned char Family; /* Byte 22 */
993 unsigned char BusType; /* Byte 23 */
994 unsigned char ModelNumber[3]; /* Bytes 24-26 */
995 unsigned char RelativeCardNumber; /* Byte 27 */
996 unsigned char Reserved[4]; /* Bytes 28-31 */
997 unsigned int OS_Reserved; /* Bytes 32-35 */
998 unsigned char TranslationInfo[4]; /* Bytes 36-39 */
999 unsigned int Reserved2[5]; /* Bytes 40-59 */
1000 unsigned int SecondaryRange; /* Bytes 60-63 */
1001};
1002
1003/*
1004 Define the BusLogic Driver Host Adapter structure.
1005*/
1006
1007struct BusLogic_HostAdapter {
1008 struct Scsi_Host *SCSI_Host;
1009 struct pci_dev *PCI_Device;
1010 enum BusLogic_HostAdapterType HostAdapterType;
1011 enum BusLogic_HostAdapterBusType HostAdapterBusType;
1012 unsigned long IO_Address;
1013 unsigned long PCI_Address;
1014 unsigned short AddressCount;
1015 unsigned char HostNumber;
1016 unsigned char ModelName[9];
1017 unsigned char FirmwareVersion[6];
1018 unsigned char FullModelName[18];
1019 unsigned char Bus;
1020 unsigned char Device;
1021 unsigned char IRQ_Channel;
1022 unsigned char DMA_Channel;
1023 unsigned char SCSI_ID;
1024 bool IRQ_ChannelAcquired:1;
1025 bool DMA_ChannelAcquired:1;
1026 bool ExtendedTranslationEnabled:1;
1027 bool ParityCheckingEnabled:1;
1028 bool BusResetEnabled:1;
1029 bool LevelSensitiveInterrupt:1;
1030 bool HostWideSCSI:1;
1031 bool HostDifferentialSCSI:1;
1032 bool HostSupportsSCAM:1;
1033 bool HostUltraSCSI:1;
1034 bool ExtendedLUNSupport:1;
1035 bool TerminationInfoValid:1;
1036 bool LowByteTerminated:1;
1037 bool HighByteTerminated:1;
1038 bool BounceBuffersRequired:1;
1039 bool StrictRoundRobinModeSupport:1;
1040 bool SCAM_Enabled:1;
1041 bool SCAM_Level2:1;
1042 bool HostAdapterInitialized:1;
1043 bool HostAdapterExternalReset:1;
1044 bool HostAdapterInternalError:1;
1045 bool ProcessCompletedCCBsActive;
1046 volatile bool HostAdapterCommandCompleted;
1047 unsigned short HostAdapterScatterGatherLimit;
1048 unsigned short DriverScatterGatherLimit;
1049 unsigned short MaxTargetDevices;
1050 unsigned short MaxLogicalUnits;
1051 unsigned short MailboxCount;
1052 unsigned short InitialCCBs;
1053 unsigned short IncrementalCCBs;
1054 unsigned short AllocatedCCBs;
1055 unsigned short DriverQueueDepth;
1056 unsigned short HostAdapterQueueDepth;
1057 unsigned short UntaggedQueueDepth;
1058 unsigned short CommonQueueDepth;
1059 unsigned short BusSettleTime;
1060 unsigned short SynchronousPermitted;
1061 unsigned short FastPermitted;
1062 unsigned short UltraPermitted;
1063 unsigned short WidePermitted;
1064 unsigned short DisconnectPermitted;
1065 unsigned short TaggedQueuingPermitted;
1066 unsigned short ExternalHostAdapterResets;
1067 unsigned short HostAdapterInternalErrors;
1068 unsigned short TargetDeviceCount;
1069 unsigned short MessageBufferLength;
1070 u32 BIOS_Address;
1071 struct BusLogic_DriverOptions *DriverOptions;
1072 struct FlashPoint_Info FlashPointInfo;
1073 FlashPoint_CardHandle_T CardHandle;
1074 struct list_head host_list;
1075 struct BusLogic_CCB *All_CCBs;
1076 struct BusLogic_CCB *Free_CCBs;
1077 struct BusLogic_CCB *FirstCompletedCCB;
1078 struct BusLogic_CCB *LastCompletedCCB;
1079 struct BusLogic_CCB *BusDeviceResetPendingCCB[BusLogic_MaxTargetDevices];
1080 struct BusLogic_TargetFlags TargetFlags[BusLogic_MaxTargetDevices];
1081 unsigned char QueueDepth[BusLogic_MaxTargetDevices];
1082 unsigned char SynchronousPeriod[BusLogic_MaxTargetDevices];
1083 unsigned char SynchronousOffset[BusLogic_MaxTargetDevices];
1084 unsigned char ActiveCommands[BusLogic_MaxTargetDevices];
1085 unsigned int CommandsSinceReset[BusLogic_MaxTargetDevices];
1086 unsigned long LastSequencePoint[BusLogic_MaxTargetDevices];
1087 unsigned long LastResetAttempted[BusLogic_MaxTargetDevices];
1088 unsigned long LastResetCompleted[BusLogic_MaxTargetDevices];
1089 struct BusLogic_OutgoingMailbox *FirstOutgoingMailbox;
1090 struct BusLogic_OutgoingMailbox *LastOutgoingMailbox;
1091 struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
1092 struct BusLogic_IncomingMailbox *FirstIncomingMailbox;
1093 struct BusLogic_IncomingMailbox *LastIncomingMailbox;
1094 struct BusLogic_IncomingMailbox *NextIncomingMailbox;
1095 struct BusLogic_TargetStatistics TargetStatistics[BusLogic_MaxTargetDevices];
1096 unsigned char *MailboxSpace;
1097 dma_addr_t MailboxSpaceHandle;
1098 unsigned int MailboxSize;
1099 unsigned long CCB_Offset;
1100 char MessageBuffer[BusLogic_MessageBufferSize];
1101};
1102
1103/*
1104 Define a structure for the BIOS Disk Parameters.
1105*/
1106
1107struct BIOS_DiskParameters {
1108 int Heads;
1109 int Sectors;
1110 int Cylinders;
1111};
1112
1113/*
1114 Define a structure for the SCSI Inquiry command results.
1115*/
1116
1117struct SCSI_Inquiry {
1118 unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
1119 unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
1120 unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
1121 bool RMB:1; /* Byte 1 Bit 7 */
1122 unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
1123 unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
1124 unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
1125 unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
1126 unsigned char:2; /* Byte 3 Bits 4-5 */
1127 bool TrmIOP:1; /* Byte 3 Bit 6 */
1128 bool AENC:1; /* Byte 3 Bit 7 */
1129 unsigned char AdditionalLength; /* Byte 4 */
1130 unsigned char:8; /* Byte 5 */
1131 unsigned char:8; /* Byte 6 */
1132 bool SftRe:1; /* Byte 7 Bit 0 */
1133 bool CmdQue:1; /* Byte 7 Bit 1 */
1134 bool:1; /* Byte 7 Bit 2 */
1135 bool Linked:1; /* Byte 7 Bit 3 */
1136 bool Sync:1; /* Byte 7 Bit 4 */
1137 bool WBus16:1; /* Byte 7 Bit 5 */
1138 bool WBus32:1; /* Byte 7 Bit 6 */
1139 bool RelAdr:1; /* Byte 7 Bit 7 */
1140 unsigned char VendorIdentification[8]; /* Bytes 8-15 */
1141 unsigned char ProductIdentification[16]; /* Bytes 16-31 */
1142 unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
1143};
1144
1145
1146/*
1147 Define functions to provide an abstraction for reading and writing the
1148 Host Adapter I/O Registers.
1149*/
1150
1151static inline void BusLogic_SCSIBusReset(struct BusLogic_HostAdapter *HostAdapter)
1152{
1153 union BusLogic_ControlRegister ControlRegister;
1154 ControlRegister.All = 0;
1155 ControlRegister.cr.SCSIBusReset = true;
1156 outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
1157}
1158
1159static inline void BusLogic_InterruptReset(struct BusLogic_HostAdapter *HostAdapter)
1160{
1161 union BusLogic_ControlRegister ControlRegister;
1162 ControlRegister.All = 0;
1163 ControlRegister.cr.InterruptReset = true;
1164 outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
1165}
1166
1167static inline void BusLogic_SoftReset(struct BusLogic_HostAdapter *HostAdapter)
1168{
1169 union BusLogic_ControlRegister ControlRegister;
1170 ControlRegister.All = 0;
1171 ControlRegister.cr.SoftReset = true;
1172 outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
1173}
1174
1175static inline void BusLogic_HardReset(struct BusLogic_HostAdapter *HostAdapter)
1176{
1177 union BusLogic_ControlRegister ControlRegister;
1178 ControlRegister.All = 0;
1179 ControlRegister.cr.HardReset = true;
1180 outb(ControlRegister.All, HostAdapter->IO_Address + BusLogic_ControlRegisterOffset);
1181}
1182
1183static inline unsigned char BusLogic_ReadStatusRegister(struct BusLogic_HostAdapter *HostAdapter)
1184{
1185 return inb(HostAdapter->IO_Address + BusLogic_StatusRegisterOffset);
1186}
1187
1188static inline void BusLogic_WriteCommandParameterRegister(struct BusLogic_HostAdapter
1189 *HostAdapter, unsigned char Value)
1190{
1191 outb(Value, HostAdapter->IO_Address + BusLogic_CommandParameterRegisterOffset);
1192}
1193
1194static inline unsigned char BusLogic_ReadDataInRegister(struct BusLogic_HostAdapter *HostAdapter)
1195{
1196 return inb(HostAdapter->IO_Address + BusLogic_DataInRegisterOffset);
1197}
1198
1199static inline unsigned char BusLogic_ReadInterruptRegister(struct BusLogic_HostAdapter *HostAdapter)
1200{
1201 return inb(HostAdapter->IO_Address + BusLogic_InterruptRegisterOffset);
1202}
1203
1204static inline unsigned char BusLogic_ReadGeometryRegister(struct BusLogic_HostAdapter *HostAdapter)
1205{
1206 return inb(HostAdapter->IO_Address + BusLogic_GeometryRegisterOffset);
1207}
1208
1209/*
1210 BusLogic_StartMailboxCommand issues an Execute Mailbox Command, which
1211 notifies the Host Adapter that an entry has been made in an Outgoing
1212 Mailbox.
1213*/
1214
1215static inline void BusLogic_StartMailboxCommand(struct BusLogic_HostAdapter *HostAdapter)
1216{
1217 BusLogic_WriteCommandParameterRegister(HostAdapter, BusLogic_ExecuteMailboxCommand);
1218}
1219
1220/*
1221 BusLogic_Delay waits for Seconds to elapse.
1222*/
1223
1224static inline void BusLogic_Delay(int Seconds)
1225{
1226 mdelay(1000 * Seconds);
1227}
1228
1229/*
1230 Virtual_to_Bus and Bus_to_Virtual map between Kernel Virtual Addresses
1231 and PCI/VLB/EISA/ISA Bus Addresses.
1232*/
1233
1234static inline u32 Virtual_to_Bus(void *VirtualAddress)
1235{
1236 return (u32) virt_to_bus(VirtualAddress);
1237}
1238
1239static inline void *Bus_to_Virtual(u32 BusAddress)
1240{
1241 return (void *) bus_to_virt(BusAddress);
1242}
1243
1244/*
1245 Virtual_to_32Bit_Virtual maps between Kernel Virtual Addresses and
1246 32 bit Kernel Virtual Addresses. This avoids compilation warnings
1247 on 64 bit architectures.
1248*/
1249
1250static inline u32 Virtual_to_32Bit_Virtual(void *VirtualAddress)
1251{
1252 return (u32) (unsigned long) VirtualAddress;
1253}
1254
1255/*
1256 BusLogic_IncrementErrorCounter increments Error Counter by 1, stopping at
1257 65535 rather than wrapping around to 0.
1258*/
1259
1260static inline void BusLogic_IncrementErrorCounter(unsigned short *ErrorCounter)
1261{
1262 if (*ErrorCounter < 65535)
1263 (*ErrorCounter)++;
1264}
1265
1266/*
1267 BusLogic_IncrementByteCounter increments Byte Counter by Amount.
1268*/
1269
1270static inline void BusLogic_IncrementByteCounter(struct BusLogic_ByteCounter
1271 *ByteCounter, unsigned int Amount)
1272{
1273 ByteCounter->Units += Amount;
1274 if (ByteCounter->Units > 999999999) {
1275 ByteCounter->Units -= 1000000000;
1276 ByteCounter->Billions++;
1277 }
1278}
1279
1280/*
1281 BusLogic_IncrementSizeBucket increments the Bucket for Amount.
1282*/
1283
1284static inline void BusLogic_IncrementSizeBucket(BusLogic_CommandSizeBuckets_T CommandSizeBuckets, unsigned int Amount)
1285{
1286 int Index = 0;
1287 if (Amount < 8 * 1024) {
1288 if (Amount < 2 * 1024)
1289 Index = (Amount < 1 * 1024 ? 0 : 1);
1290 else
1291 Index = (Amount < 4 * 1024 ? 2 : 3);
1292 } else if (Amount < 128 * 1024) {
1293 if (Amount < 32 * 1024)
1294 Index = (Amount < 16 * 1024 ? 4 : 5);
1295 else
1296 Index = (Amount < 64 * 1024 ? 6 : 7);
1297 } else
1298 Index = (Amount < 256 * 1024 ? 8 : 9);
1299 CommandSizeBuckets[Index]++;
1300}
1301
1302/*
1303 Define the version number of the FlashPoint Firmware (SCCB Manager).
1304*/
1305
1306#define FlashPoint_FirmwareVersion "5.02"
1307
1308/*
1309 Define the possible return values from FlashPoint_HandleInterrupt.
1310*/
1311
1312#define FlashPoint_NormalInterrupt 0x00
1313#define FlashPoint_InternalError 0xFE
1314#define FlashPoint_ExternalBusReset 0xFF
1315
1316/*
1317 Define prototypes for the forward referenced BusLogic Driver
1318 Internal Functions.
1319*/
1320
1321static const char *BusLogic_DriverInfo(struct Scsi_Host *);
1322static int BusLogic_QueueCommand(struct Scsi_Host *h, struct scsi_cmnd *);
1323static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *);
1324static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int);
1325static int BusLogic_SlaveConfigure(struct scsi_device *);
1326static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *);
1327static irqreturn_t BusLogic_InterruptHandler(int, void *);
1328static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *, bool HardReset);
1329static void BusLogic_Message(enum BusLogic_MessageLevel, char *, struct BusLogic_HostAdapter *, ...);
1330static int __init BusLogic_Setup(char *);
1331
1332#endif /* _BUSLOGIC_H */
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3
4 Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
5
6 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
7
8
9 The author respectfully requests that any modifications to this software be
10 sent directly to him for evaluation and testing.
11
12 Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
13 advice has been invaluable, to David Gentzel, for writing the original Linux
14 BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
15
16 Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
17 Manager available as freely redistributable source code.
18
19*/
20
21#ifndef _BUSLOGIC_H
22#define _BUSLOGIC_H
23
24
25#ifndef PACKED
26#define PACKED __attribute__((packed))
27#endif
28
29/*
30 Define the maximum number of BusLogic Host Adapters supported by this driver.
31*/
32
33#define BLOGIC_MAX_ADAPTERS 16
34
35
36/*
37 Define the maximum number of Target Devices supported by this driver.
38*/
39
40#define BLOGIC_MAXDEV 16
41
42
43/*
44 Define the maximum number of Scatter/Gather Segments used by this driver.
45 For optimal performance, it is important that this limit be at least as
46 large as the largest single request generated by the I/O Subsystem.
47*/
48
49#define BLOGIC_SG_LIMIT 128
50
51
52/*
53 Define the maximum, maximum automatic, minimum automatic, and default Queue
54 Depth to allow for Target Devices depending on whether or not they support
55 Tagged Queuing and whether or not ISA Bounce Buffers are required.
56*/
57
58#define BLOGIC_MAX_TAG_DEPTH 64
59#define BLOGIC_MAX_AUTO_TAG_DEPTH 28
60#define BLOGIC_MIN_AUTO_TAG_DEPTH 7
61#define BLOGIC_TAG_DEPTH_BB 3
62#define BLOGIC_UNTAG_DEPTH 3
63#define BLOGIC_UNTAG_DEPTH_BB 2
64
65
66/*
67 Define the default amount of time in seconds to wait between a Host Adapter
68 Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands.
69 Some SCSI devices get confused if they receive SCSI commands too soon after
70 a SCSI Bus Reset.
71*/
72
73#define BLOGIC_BUS_SETTLE_TIME 2
74
75
76/*
77 Define the maximum number of Mailboxes that should be used for MultiMaster
78 Host Adapters. This number is chosen to be larger than the maximum Host
79 Adapter Queue Depth and small enough so that the Host Adapter structure
80 does not cross an allocation block size boundary.
81*/
82
83#define BLOGIC_MAX_MAILBOX 211
84
85
86/*
87 Define the number of CCBs that should be allocated as a group to optimize
88 Kernel memory allocation.
89*/
90
91#define BLOGIC_CCB_GRP_ALLOCSIZE 7
92
93
94/*
95 Define the Host Adapter Line and Message Buffer Sizes.
96*/
97
98#define BLOGIC_LINEBUF_SIZE 100
99#define BLOGIC_MSGBUF_SIZE 9700
100
101
102/*
103 Define the Driver Message Levels.
104*/
105
106enum blogic_msglevel {
107 BLOGIC_ANNOUNCE_LEVEL = 0,
108 BLOGIC_INFO_LEVEL = 1,
109 BLOGIC_NOTICE_LEVEL = 2,
110 BLOGIC_WARN_LEVEL = 3,
111 BLOGIC_ERR_LEVEL = 4
112};
113
114static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
115
116
117/*
118 Define Driver Message macros.
119*/
120
121#define blogic_announce(format, args...) \
122 blogic_msg(BLOGIC_ANNOUNCE_LEVEL, format, ##args)
123
124#define blogic_info(format, args...) \
125 blogic_msg(BLOGIC_INFO_LEVEL, format, ##args)
126
127#define blogic_notice(format, args...) \
128 blogic_msg(BLOGIC_NOTICE_LEVEL, format, ##args)
129
130#define blogic_warn(format, args...) \
131 blogic_msg(BLOGIC_WARN_LEVEL, format, ##args)
132
133#define blogic_err(format, args...) \
134 blogic_msg(BLOGIC_ERR_LEVEL, format, ##args)
135
136
137/*
138 Define the types of BusLogic Host Adapters that are supported and the number
139 of I/O Addresses required by each type.
140*/
141
142enum blogic_adapter_type {
143 BLOGIC_MULTIMASTER = 1,
144 BLOGIC_FLASHPOINT = 2
145} PACKED;
146
147#define BLOGIC_MULTIMASTER_ADDR_COUNT 4
148#define BLOGIC_FLASHPOINT_ADDR_COUNT 256
149
150static int blogic_adapter_addr_count[3] = { 0, BLOGIC_MULTIMASTER_ADDR_COUNT, BLOGIC_FLASHPOINT_ADDR_COUNT };
151
152
153/*
154 Define macros for testing the Host Adapter Type.
155*/
156
157#ifdef CONFIG_SCSI_FLASHPOINT
158
159#define blogic_multimaster_type(adapter) \
160 (adapter->adapter_type == BLOGIC_MULTIMASTER)
161
162#define blogic_flashpoint_type(adapter) \
163 (adapter->adapter_type == BLOGIC_FLASHPOINT)
164
165#else
166
167#define blogic_multimaster_type(adapter) (true)
168#define blogic_flashpoint_type(adapter) (false)
169
170#endif
171
172
173/*
174 Define the possible Host Adapter Bus Types.
175*/
176
177enum blogic_adapter_bus_type {
178 BLOGIC_UNKNOWN_BUS = 0,
179 BLOGIC_ISA_BUS = 1,
180 BLOGIC_EISA_BUS = 2,
181 BLOGIC_PCI_BUS = 3,
182 BLOGIC_VESA_BUS = 4,
183 BLOGIC_MCA_BUS = 5
184} PACKED;
185
186static char *blogic_adapter_busnames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" };
187
188static enum blogic_adapter_bus_type blogic_adater_bus_types[] = {
189 BLOGIC_VESA_BUS, /* BT-4xx */
190 BLOGIC_ISA_BUS, /* BT-5xx */
191 BLOGIC_MCA_BUS, /* BT-6xx */
192 BLOGIC_EISA_BUS, /* BT-7xx */
193 BLOGIC_UNKNOWN_BUS, /* BT-8xx */
194 BLOGIC_PCI_BUS /* BT-9xx */
195};
196
197/*
198 Define the possible Host Adapter BIOS Disk Geometry Translations.
199*/
200
201enum blogic_bios_diskgeometry {
202 BLOGIC_BIOS_NODISK = 0,
203 BLOGIC_BIOS_DISK64x32 = 1,
204 BLOGIC_BIOS_DISK128x32 = 2,
205 BLOGIC_BIOS_DISK255x63 = 3
206} PACKED;
207
208
209/*
210 Define a 10^18 Statistics Byte Counter data type.
211*/
212
213struct blogic_byte_count {
214 unsigned int units;
215 unsigned int billions;
216};
217
218
219/*
220 Define the structure for I/O Address and Bus Probing Information.
221*/
222
223struct blogic_probeinfo {
224 enum blogic_adapter_type adapter_type;
225 enum blogic_adapter_bus_type adapter_bus_type;
226 unsigned long io_addr;
227 unsigned long pci_addr;
228 struct pci_dev *pci_device;
229 unsigned char bus;
230 unsigned char dev;
231 unsigned char irq_ch;
232};
233
234/*
235 Define the Probe Options.
236*/
237
238struct blogic_probe_options {
239 bool noprobe:1; /* Bit 0 */
240 bool noprobe_pci:1; /* Bit 2 */
241 bool nosort_pci:1; /* Bit 3 */
242 bool multimaster_first:1; /* Bit 4 */
243 bool flashpoint_first:1; /* Bit 5 */
244};
245
246/*
247 Define the Global Options.
248*/
249
250struct blogic_global_options {
251 bool trace_probe:1; /* Bit 0 */
252 bool trace_hw_reset:1; /* Bit 1 */
253 bool trace_config:1; /* Bit 2 */
254 bool trace_err:1; /* Bit 3 */
255};
256
257/*
258 Define the BusLogic SCSI Host Adapter I/O Register Offsets.
259*/
260
261#define BLOGIC_CNTRL_REG 0 /* WO register */
262#define BLOGIC_STATUS_REG 0 /* RO register */
263#define BLOGIC_CMD_PARM_REG 1 /* WO register */
264#define BLOGIC_DATAIN_REG 1 /* RO register */
265#define BLOGIC_INT_REG 2 /* RO register */
266#define BLOGIC_GEOMETRY_REG 3 /* RO register */
267
268/*
269 Define the structure of the write-only Control Register.
270*/
271
272union blogic_cntrl_reg {
273 unsigned char all;
274 struct {
275 unsigned char:4; /* Bits 0-3 */
276 bool bus_reset:1; /* Bit 4 */
277 bool int_reset:1; /* Bit 5 */
278 bool soft_reset:1; /* Bit 6 */
279 bool hard_reset:1; /* Bit 7 */
280 } cr;
281};
282
283/*
284 Define the structure of the read-only Status Register.
285*/
286
287union blogic_stat_reg {
288 unsigned char all;
289 struct {
290 bool cmd_invalid:1; /* Bit 0 */
291 bool rsvd:1; /* Bit 1 */
292 bool datain_ready:1; /* Bit 2 */
293 bool cmd_param_busy:1; /* Bit 3 */
294 bool adapter_ready:1; /* Bit 4 */
295 bool init_reqd:1; /* Bit 5 */
296 bool diag_failed:1; /* Bit 6 */
297 bool diag_active:1; /* Bit 7 */
298 } sr;
299};
300
301/*
302 Define the structure of the read-only Interrupt Register.
303*/
304
305union blogic_int_reg {
306 unsigned char all;
307 struct {
308 bool mailin_loaded:1; /* Bit 0 */
309 bool mailout_avail:1; /* Bit 1 */
310 bool cmd_complete:1; /* Bit 2 */
311 bool ext_busreset:1; /* Bit 3 */
312 unsigned char rsvd:3; /* Bits 4-6 */
313 bool int_valid:1; /* Bit 7 */
314 } ir;
315};
316
317/*
318 Define the structure of the read-only Geometry Register.
319*/
320
321union blogic_geo_reg {
322 unsigned char all;
323 struct {
324 enum blogic_bios_diskgeometry d0_geo:2; /* Bits 0-1 */
325 enum blogic_bios_diskgeometry d1_geo:2; /* Bits 2-3 */
326 unsigned char:3; /* Bits 4-6 */
327 bool ext_trans_enable:1; /* Bit 7 */
328 } gr;
329};
330
331/*
332 Define the BusLogic SCSI Host Adapter Command Register Operation Codes.
333*/
334
335enum blogic_opcode {
336 BLOGIC_TEST_CMP_COMPLETE = 0x00,
337 BLOGIC_INIT_MBOX = 0x01,
338 BLOGIC_EXEC_MBOX_CMD = 0x02,
339 BLOGIC_EXEC_BIOS_CMD = 0x03,
340 BLOGIC_GET_BOARD_ID = 0x04,
341 BLOGIC_ENABLE_OUTBOX_AVAIL_INT = 0x05,
342 BLOGIC_SET_SELECT_TIMEOUT = 0x06,
343 BLOGIC_SET_PREEMPT_TIME = 0x07,
344 BLOGIC_SET_TIMEOFF_BUS = 0x08,
345 BLOGIC_SET_TXRATE = 0x09,
346 BLOGIC_INQ_DEV0TO7 = 0x0A,
347 BLOGIC_INQ_CONFIG = 0x0B,
348 BLOGIC_TGT_MODE = 0x0C,
349 BLOGIC_INQ_SETUPINFO = 0x0D,
350 BLOGIC_WRITE_LOCALRAM = 0x1A,
351 BLOGIC_READ_LOCALRAM = 0x1B,
352 BLOGIC_WRITE_BUSMASTER_FIFO = 0x1C,
353 BLOGIC_READ_BUSMASTER_FIFO = 0x1D,
354 BLOGIC_ECHO_CMDDATA = 0x1F,
355 BLOGIC_ADAPTER_DIAG = 0x20,
356 BLOGIC_SET_OPTIONS = 0x21,
357 BLOGIC_INQ_DEV8TO15 = 0x23,
358 BLOGIC_INQ_DEV = 0x24,
359 BLOGIC_DISABLE_INT = 0x25,
360 BLOGIC_INIT_EXT_MBOX = 0x81,
361 BLOGIC_EXEC_SCS_CMD = 0x83,
362 BLOGIC_INQ_FWVER_D3 = 0x84,
363 BLOGIC_INQ_FWVER_LETTER = 0x85,
364 BLOGIC_INQ_PCI_INFO = 0x86,
365 BLOGIC_INQ_MODELNO = 0x8B,
366 BLOGIC_INQ_SYNC_PERIOD = 0x8C,
367 BLOGIC_INQ_EXTSETUP = 0x8D,
368 BLOGIC_STRICT_RR = 0x8F,
369 BLOGIC_STORE_LOCALRAM = 0x90,
370 BLOGIC_FETCH_LOCALRAM = 0x91,
371 BLOGIC_STORE_TO_EEPROM = 0x92,
372 BLOGIC_LOAD_AUTOSCSICODE = 0x94,
373 BLOGIC_MOD_IOADDR = 0x95,
374 BLOGIC_SETCCB_FMT = 0x96,
375 BLOGIC_WRITE_INQBUF = 0x9A,
376 BLOGIC_READ_INQBUF = 0x9B,
377 BLOGIC_FLASH_LOAD = 0xA7,
378 BLOGIC_READ_SCAMDATA = 0xA8,
379 BLOGIC_WRITE_SCAMDATA = 0xA9
380};
381
382/*
383 Define the Inquire Board ID reply structure.
384*/
385
386struct blogic_board_id {
387 unsigned char type; /* Byte 0 */
388 unsigned char custom_features; /* Byte 1 */
389 unsigned char fw_ver_digit1; /* Byte 2 */
390 unsigned char fw_ver_digit2; /* Byte 3 */
391};
392
393/*
394 Define the Inquire Configuration reply structure.
395*/
396
397struct blogic_config {
398 unsigned char:5; /* Byte 0 Bits 0-4 */
399 bool dma_ch5:1; /* Byte 0 Bit 5 */
400 bool dma_ch6:1; /* Byte 0 Bit 6 */
401 bool dma_ch7:1; /* Byte 0 Bit 7 */
402 bool irq_ch9:1; /* Byte 1 Bit 0 */
403 bool irq_ch10:1; /* Byte 1 Bit 1 */
404 bool irq_ch11:1; /* Byte 1 Bit 2 */
405 bool irq_ch12:1; /* Byte 1 Bit 3 */
406 unsigned char:1; /* Byte 1 Bit 4 */
407 bool irq_ch14:1; /* Byte 1 Bit 5 */
408 bool irq_ch15:1; /* Byte 1 Bit 6 */
409 unsigned char:1; /* Byte 1 Bit 7 */
410 unsigned char id:4; /* Byte 2 Bits 0-3 */
411 unsigned char:4; /* Byte 2 Bits 4-7 */
412};
413
414/*
415 Define the Inquire Setup Information reply structure.
416*/
417
418struct blogic_syncval {
419 unsigned char offset:4; /* Bits 0-3 */
420 unsigned char tx_period:3; /* Bits 4-6 */
421 bool sync:1; /* Bit 7 */
422};
423
424struct blogic_setup_info {
425 bool sync:1; /* Byte 0 Bit 0 */
426 bool parity:1; /* Byte 0 Bit 1 */
427 unsigned char:6; /* Byte 0 Bits 2-7 */
428 unsigned char tx_rate; /* Byte 1 */
429 unsigned char preempt_time; /* Byte 2 */
430 unsigned char timeoff_bus; /* Byte 3 */
431 unsigned char mbox_count; /* Byte 4 */
432 unsigned char mbox_addr[3]; /* Bytes 5-7 */
433 struct blogic_syncval sync0to7[8]; /* Bytes 8-15 */
434 unsigned char disconnect_ok0to7; /* Byte 16 */
435 unsigned char sig; /* Byte 17 */
436 unsigned char char_d; /* Byte 18 */
437 unsigned char bus_type; /* Byte 19 */
438 unsigned char wide_tx_ok0to7; /* Byte 20 */
439 unsigned char wide_tx_active0to7; /* Byte 21 */
440 struct blogic_syncval sync8to15[8]; /* Bytes 22-29 */
441 unsigned char disconnect_ok8to15; /* Byte 30 */
442 unsigned char:8; /* Byte 31 */
443 unsigned char wide_tx_ok8to15; /* Byte 32 */
444 unsigned char wide_tx_active8to15; /* Byte 33 */
445};
446
447/*
448 Define the Initialize Extended Mailbox request structure.
449*/
450
451struct blogic_extmbox_req {
452 unsigned char mbox_count; /* Byte 0 */
453 u32 base_mbox_addr; /* Bytes 1-4 */
454} PACKED;
455
456
457/*
458 Define the Inquire PCI Host Adapter Information reply type. The ISA
459 Compatible I/O Port values are defined here and are also used with
460 the Modify I/O Address command.
461*/
462
463enum blogic_isa_ioport {
464 BLOGIC_IO_330 = 0,
465 BLOGIC_IO_334 = 1,
466 BLOGIC_IO_230 = 2,
467 BLOGIC_IO_234 = 3,
468 BLOGIC_IO_130 = 4,
469 BLOGIC_IO_134 = 5,
470 BLOGIC_IO_DISABLE = 6,
471 BLOGIC_IO_DISABLE2 = 7
472} PACKED;
473
474struct blogic_adapter_info {
475 enum blogic_isa_ioport isa_port; /* Byte 0 */
476 unsigned char irq_ch; /* Byte 1 */
477 bool low_term:1; /* Byte 2 Bit 0 */
478 bool high_term:1; /* Byte 2 Bit 1 */
479 unsigned char:2; /* Byte 2 Bits 2-3 */
480 bool JP1:1; /* Byte 2 Bit 4 */
481 bool JP2:1; /* Byte 2 Bit 5 */
482 bool JP3:1; /* Byte 2 Bit 6 */
483 bool genericinfo_valid:1; /* Byte 2 Bit 7 */
484 unsigned char:8; /* Byte 3 */
485};
486
487/*
488 Define the Inquire Extended Setup Information reply structure.
489*/
490
491struct blogic_ext_setup {
492 unsigned char bus_type; /* Byte 0 */
493 unsigned char bios_addr; /* Byte 1 */
494 unsigned short sg_limit; /* Bytes 2-3 */
495 unsigned char mbox_count; /* Byte 4 */
496 u32 base_mbox_addr; /* Bytes 5-8 */
497 struct {
498 unsigned char:2; /* Byte 9 Bits 0-1 */
499 bool fast_on_eisa:1; /* Byte 9 Bit 2 */
500 unsigned char:3; /* Byte 9 Bits 3-5 */
501 bool level_int:1; /* Byte 9 Bit 6 */
502 unsigned char:1; /* Byte 9 Bit 7 */
503 } misc;
504 unsigned char fw_rev[3]; /* Bytes 10-12 */
505 bool wide:1; /* Byte 13 Bit 0 */
506 bool differential:1; /* Byte 13 Bit 1 */
507 bool scam:1; /* Byte 13 Bit 2 */
508 bool ultra:1; /* Byte 13 Bit 3 */
509 bool smart_term:1; /* Byte 13 Bit 4 */
510 unsigned char:3; /* Byte 13 Bits 5-7 */
511} PACKED;
512
513/*
514 Define the Enable Strict Round Robin Mode request type.
515*/
516
517enum blogic_rr_req {
518 BLOGIC_AGGRESSIVE_RR = 0,
519 BLOGIC_STRICT_RR_MODE = 1
520} PACKED;
521
522
523/*
524 Define the Fetch Host Adapter Local RAM request type.
525*/
526
527#define BLOGIC_BIOS_BASE 0
528#define BLOGIC_AUTOSCSI_BASE 64
529
530struct blogic_fetch_localram {
531 unsigned char offset; /* Byte 0 */
532 unsigned char count; /* Byte 1 */
533};
534
535/*
536 Define the Host Adapter Local RAM AutoSCSI structure.
537*/
538
539struct blogic_autoscsi {
540 unsigned char factory_sig[2]; /* Bytes 0-1 */
541 unsigned char info_bytes; /* Byte 2 */
542 unsigned char adapter_type[6]; /* Bytes 3-8 */
543 unsigned char:8; /* Byte 9 */
544 bool floppy:1; /* Byte 10 Bit 0 */
545 bool floppy_sec:1; /* Byte 10 Bit 1 */
546 bool level_int:1; /* Byte 10 Bit 2 */
547 unsigned char:2; /* Byte 10 Bits 3-4 */
548 unsigned char systemram_bios:3; /* Byte 10 Bits 5-7 */
549 unsigned char dma_ch:7; /* Byte 11 Bits 0-6 */
550 bool dma_autoconf:1; /* Byte 11 Bit 7 */
551 unsigned char irq_ch:7; /* Byte 12 Bits 0-6 */
552 bool irq_autoconf:1; /* Byte 12 Bit 7 */
553 unsigned char dma_tx_rate; /* Byte 13 */
554 unsigned char scsi_id; /* Byte 14 */
555 bool low_term:1; /* Byte 15 Bit 0 */
556 bool parity:1; /* Byte 15 Bit 1 */
557 bool high_term:1; /* Byte 15 Bit 2 */
558 bool noisy_cable:1; /* Byte 15 Bit 3 */
559 bool fast_sync_neg:1; /* Byte 15 Bit 4 */
560 bool reset_enabled:1; /* Byte 15 Bit 5 */
561 bool:1; /* Byte 15 Bit 6 */
562 bool active_negation:1; /* Byte 15 Bit 7 */
563 unsigned char bus_on_delay; /* Byte 16 */
564 unsigned char bus_off_delay; /* Byte 17 */
565 bool bios_enabled:1; /* Byte 18 Bit 0 */
566 bool int19_redir_enabled:1; /* Byte 18 Bit 1 */
567 bool ext_trans_enable:1; /* Byte 18 Bit 2 */
568 bool removable_as_fixed:1; /* Byte 18 Bit 3 */
569 bool:1; /* Byte 18 Bit 4 */
570 bool morethan2_drives:1; /* Byte 18 Bit 5 */
571 bool bios_int:1; /* Byte 18 Bit 6 */
572 bool floptical:1; /* Byte 19 Bit 7 */
573 unsigned short dev_enabled; /* Bytes 19-20 */
574 unsigned short wide_ok; /* Bytes 21-22 */
575 unsigned short fast_ok; /* Bytes 23-24 */
576 unsigned short sync_ok; /* Bytes 25-26 */
577 unsigned short discon_ok; /* Bytes 27-28 */
578 unsigned short send_start_unit; /* Bytes 29-30 */
579 unsigned short ignore_bios_scan; /* Bytes 31-32 */
580 unsigned char pci_int_pin:2; /* Byte 33 Bits 0-1 */
581 unsigned char adapter_ioport:2; /* Byte 33 Bits 2-3 */
582 bool strict_rr_enabled:1; /* Byte 33 Bit 4 */
583 bool vesabus_33mhzplus:1; /* Byte 33 Bit 5 */
584 bool vesa_burst_write:1; /* Byte 33 Bit 6 */
585 bool vesa_burst_read:1; /* Byte 33 Bit 7 */
586 unsigned short ultra_ok; /* Bytes 34-35 */
587 unsigned int:32; /* Bytes 36-39 */
588 unsigned char:8; /* Byte 40 */
589 unsigned char autoscsi_maxlun; /* Byte 41 */
590 bool:1; /* Byte 42 Bit 0 */
591 bool scam_dominant:1; /* Byte 42 Bit 1 */
592 bool scam_enabled:1; /* Byte 42 Bit 2 */
593 bool scam_lev2:1; /* Byte 42 Bit 3 */
594 unsigned char:4; /* Byte 42 Bits 4-7 */
595 bool int13_exten:1; /* Byte 43 Bit 0 */
596 bool:1; /* Byte 43 Bit 1 */
597 bool cd_boot:1; /* Byte 43 Bit 2 */
598 unsigned char:5; /* Byte 43 Bits 3-7 */
599 unsigned char boot_id:4; /* Byte 44 Bits 0-3 */
600 unsigned char boot_ch:4; /* Byte 44 Bits 4-7 */
601 unsigned char force_scan_order:1; /* Byte 45 Bit 0 */
602 unsigned char:7; /* Byte 45 Bits 1-7 */
603 unsigned short nontagged_to_alt_ok; /* Bytes 46-47 */
604 unsigned short reneg_sync_on_check; /* Bytes 48-49 */
605 unsigned char rsvd[10]; /* Bytes 50-59 */
606 unsigned char manuf_diag[2]; /* Bytes 60-61 */
607 unsigned short cksum; /* Bytes 62-63 */
608} PACKED;
609
610/*
611 Define the Host Adapter Local RAM Auto SCSI Byte 45 structure.
612*/
613
614struct blogic_autoscsi_byte45 {
615 unsigned char force_scan_order:1; /* Bit 0 */
616 unsigned char:7; /* Bits 1-7 */
617};
618
619/*
620 Define the Host Adapter Local RAM BIOS Drive Map Byte structure.
621*/
622
623#define BLOGIC_BIOS_DRVMAP 17
624
625struct blogic_bios_drvmap {
626 unsigned char tgt_idbit3:1; /* Bit 0 */
627 unsigned char:2; /* Bits 1-2 */
628 enum blogic_bios_diskgeometry diskgeom:2; /* Bits 3-4 */
629 unsigned char tgt_id:3; /* Bits 5-7 */
630};
631
632/*
633 Define the Set CCB Format request type. Extended LUN Format CCBs are
634 necessary to support more than 8 Logical Units per Target Device.
635*/
636
637enum blogic_setccb_fmt {
638 BLOGIC_LEGACY_LUN_CCB = 0,
639 BLOGIC_EXT_LUN_CCB = 1
640} PACKED;
641
642/*
643 Define the Outgoing Mailbox Action Codes.
644*/
645
646enum blogic_action {
647 BLOGIC_OUTBOX_FREE = 0x00,
648 BLOGIC_MBOX_START = 0x01,
649 BLOGIC_MBOX_ABORT = 0x02
650} PACKED;
651
652
653/*
654 Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware
655 only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so
656 completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5.
657*/
658
659enum blogic_cmplt_code {
660 BLOGIC_INBOX_FREE = 0x00,
661 BLOGIC_CMD_COMPLETE_GOOD = 0x01,
662 BLOGIC_CMD_ABORT_BY_HOST = 0x02,
663 BLOGIC_CMD_NOTFOUND = 0x03,
664 BLOGIC_CMD_COMPLETE_ERROR = 0x04,
665 BLOGIC_INVALID_CCB = 0x05
666} PACKED;
667
668/*
669 Define the Command Control Block (CCB) Opcodes.
670*/
671
672enum blogic_ccb_opcode {
673 BLOGIC_INITIATOR_CCB = 0x00,
674 BLOGIC_TGT_CCB = 0x01,
675 BLOGIC_INITIATOR_CCB_SG = 0x02,
676 BLOGIC_INITIATOR_CCBB_RESIDUAL = 0x03,
677 BLOGIC_INITIATOR_CCB_SG_RESIDUAL = 0x04,
678 BLOGIC_BDR = 0x81
679} PACKED;
680
681
682/*
683 Define the CCB Data Direction Codes.
684*/
685
686enum blogic_datadir {
687 BLOGIC_UNCHECKED_TX = 0,
688 BLOGIC_DATAIN_CHECKED = 1,
689 BLOGIC_DATAOUT_CHECKED = 2,
690 BLOGIC_NOTX = 3
691};
692
693
694/*
695 Define the Host Adapter Status Codes. The MultiMaster Firmware does not
696 return status code 0x0C; it uses 0x12 for both overruns and underruns.
697*/
698
699enum blogic_adapter_status {
700 BLOGIC_CMD_CMPLT_NORMAL = 0x00,
701 BLOGIC_LINK_CMD_CMPLT = 0x0A,
702 BLOGIC_LINK_CMD_CMPLT_FLAG = 0x0B,
703 BLOGIC_DATA_UNDERRUN = 0x0C,
704 BLOGIC_SELECT_TIMEOUT = 0x11,
705 BLOGIC_DATA_OVERRUN = 0x12,
706 BLOGIC_NOEXPECT_BUSFREE = 0x13,
707 BLOGIC_INVALID_BUSPHASE = 0x14,
708 BLOGIC_INVALID_OUTBOX_CODE = 0x15,
709 BLOGIC_INVALID_CMD_CODE = 0x16,
710 BLOGIC_LINKCCB_BADLUN = 0x17,
711 BLOGIC_BAD_CMD_PARAM = 0x1A,
712 BLOGIC_AUTOREQSENSE_FAIL = 0x1B,
713 BLOGIC_TAGQUEUE_REJECT = 0x1C,
714 BLOGIC_BAD_MSG_RCVD = 0x1D,
715 BLOGIC_HW_FAIL = 0x20,
716 BLOGIC_NORESPONSE_TO_ATN = 0x21,
717 BLOGIC_HW_RESET = 0x22,
718 BLOGIC_RST_FROM_OTHERDEV = 0x23,
719 BLOGIC_BAD_RECONNECT = 0x24,
720 BLOGIC_HW_BDR = 0x25,
721 BLOGIC_ABRT_QUEUE = 0x26,
722 BLOGIC_ADAPTER_SW_ERROR = 0x27,
723 BLOGIC_HW_TIMEOUT = 0x30,
724 BLOGIC_PARITY_ERR = 0x34
725} PACKED;
726
727
728/*
729 Define the SCSI Target Device Status Codes.
730*/
731
732enum blogic_tgt_status {
733 BLOGIC_OP_GOOD = 0x00,
734 BLOGIC_CHECKCONDITION = 0x02,
735 BLOGIC_DEVBUSY = 0x08
736} PACKED;
737
738/*
739 Define the Queue Tag Codes.
740*/
741
742enum blogic_queuetag {
743 BLOGIC_SIMPLETAG = 0,
744 BLOGIC_HEADTAG = 1,
745 BLOGIC_ORDEREDTAG = 2,
746 BLOGIC_RSVDTAG = 3
747};
748
749/*
750 Define the SCSI Command Descriptor Block (CDB).
751*/
752
753#define BLOGIC_CDB_MAXLEN 12
754
755
756/*
757 Define the Scatter/Gather Segment structure required by the MultiMaster
758 Firmware Interface and the FlashPoint SCCB Manager.
759*/
760
761struct blogic_sg_seg {
762 u32 segbytes; /* Bytes 0-3 */
763 u32 segdata; /* Bytes 4-7 */
764};
765
766/*
767 Define the Driver CCB Status Codes.
768*/
769
770enum blogic_ccb_status {
771 BLOGIC_CCB_FREE = 0,
772 BLOGIC_CCB_ACTIVE = 1,
773 BLOGIC_CCB_COMPLETE = 2,
774 BLOGIC_CCB_RESET = 3
775} PACKED;
776
777
778/*
779 Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40
780 bytes are defined by and common to both the MultiMaster Firmware and the
781 FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint
782 SCCB Manager. The remaining components are defined by the Linux BusLogic
783 Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode
784 CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to
785 byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory,
786 Extended LUN Format CCBs can support up to 64 Logical Units, but in practice
787 many devices will respond improperly to Logical Units between 32 and 63, and
788 the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs
789 are used by recent versions of the MultiMaster Firmware, as well as by the
790 FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical
791 Units. Since 64 Logical Units are unlikely to be needed in practice, and
792 since they are problematic for the above reasons, and since limiting them to
793 5 bits simplifies the CCB structure definition, this driver only supports
794 32 Logical Units per Target Device.
795*/
796
797struct blogic_ccb {
798 /*
799 MultiMaster Firmware and FlashPoint SCCB Manager Common Portion.
800 */
801 enum blogic_ccb_opcode opcode; /* Byte 0 */
802 unsigned char:3; /* Byte 1 Bits 0-2 */
803 enum blogic_datadir datadir:2; /* Byte 1 Bits 3-4 */
804 bool tag_enable:1; /* Byte 1 Bit 5 */
805 enum blogic_queuetag queuetag:2; /* Byte 1 Bits 6-7 */
806 unsigned char cdblen; /* Byte 2 */
807 unsigned char sense_datalen; /* Byte 3 */
808 u32 datalen; /* Bytes 4-7 */
809 u32 data; /* Bytes 8-11 */
810 unsigned char:8; /* Byte 12 */
811 unsigned char:8; /* Byte 13 */
812 enum blogic_adapter_status adapter_status; /* Byte 14 */
813 enum blogic_tgt_status tgt_status; /* Byte 15 */
814 unsigned char tgt_id; /* Byte 16 */
815 unsigned char lun:5; /* Byte 17 Bits 0-4 */
816 bool legacytag_enable:1; /* Byte 17 Bit 5 */
817 enum blogic_queuetag legacy_tag:2; /* Byte 17 Bits 6-7 */
818 unsigned char cdb[BLOGIC_CDB_MAXLEN]; /* Bytes 18-29 */
819 unsigned char:8; /* Byte 30 */
820 unsigned char:8; /* Byte 31 */
821 u32 rsvd_int; /* Bytes 32-35 */
822 u32 sensedata; /* Bytes 36-39 */
823 /*
824 FlashPoint SCCB Manager Defined Portion.
825 */
826 void (*callback) (struct blogic_ccb *); /* Bytes 40-43 */
827 u32 base_addr; /* Bytes 44-47 */
828 enum blogic_cmplt_code comp_code; /* Byte 48 */
829#ifdef CONFIG_SCSI_FLASHPOINT
830 unsigned char:8; /* Byte 49 */
831 u16 os_flags; /* Bytes 50-51 */
832 unsigned char private[24]; /* Bytes 52-99 */
833 void *rsvd1;
834 void *rsvd2;
835 unsigned char private2[16];
836#endif
837 /*
838 BusLogic Linux Driver Defined Portion.
839 */
840 dma_addr_t allocgrp_head;
841 unsigned int allocgrp_size;
842 u32 dma_handle;
843 enum blogic_ccb_status status;
844 unsigned long serial;
845 struct scsi_cmnd *command;
846 struct blogic_adapter *adapter;
847 struct blogic_ccb *next;
848 struct blogic_ccb *next_all;
849 struct blogic_sg_seg sglist[BLOGIC_SG_LIMIT];
850};
851
852/*
853 Define the 32 Bit Mode Outgoing Mailbox structure.
854*/
855
856struct blogic_outbox {
857 u32 ccb; /* Bytes 0-3 */
858 u32:24; /* Bytes 4-6 */
859 enum blogic_action action; /* Byte 7 */
860};
861
862/*
863 Define the 32 Bit Mode Incoming Mailbox structure.
864*/
865
866struct blogic_inbox {
867 u32 ccb; /* Bytes 0-3 */
868 enum blogic_adapter_status adapter_status; /* Byte 4 */
869 enum blogic_tgt_status tgt_status; /* Byte 5 */
870 unsigned char:8; /* Byte 6 */
871 enum blogic_cmplt_code comp_code; /* Byte 7 */
872};
873
874
875/*
876 Define the BusLogic Driver Options structure.
877*/
878
879struct blogic_drvr_options {
880 unsigned short tagq_ok;
881 unsigned short tagq_ok_mask;
882 unsigned short bus_settle_time;
883 unsigned short stop_tgt_inquiry;
884 unsigned char common_qdepth;
885 unsigned char qdepth[BLOGIC_MAXDEV];
886};
887
888/*
889 Define the Host Adapter Target Flags structure.
890*/
891
892struct blogic_tgt_flags {
893 bool tgt_exists:1;
894 bool tagq_ok:1;
895 bool wide_ok:1;
896 bool tagq_active:1;
897 bool wide_active:1;
898 bool cmd_good:1;
899 bool tgt_info_in:1;
900};
901
902/*
903 Define the Host Adapter Target Statistics structure.
904*/
905
906#define BLOGIC_SZ_BUCKETS 10
907
908struct blogic_tgt_stats {
909 unsigned int cmds_tried;
910 unsigned int cmds_complete;
911 unsigned int read_cmds;
912 unsigned int write_cmds;
913 struct blogic_byte_count bytesread;
914 struct blogic_byte_count byteswritten;
915 unsigned int read_sz_buckets[BLOGIC_SZ_BUCKETS];
916 unsigned int write_sz_buckets[BLOGIC_SZ_BUCKETS];
917 unsigned short aborts_request;
918 unsigned short aborts_tried;
919 unsigned short aborts_done;
920 unsigned short bdr_request;
921 unsigned short bdr_tried;
922 unsigned short bdr_done;
923 unsigned short adapter_reset_req;
924 unsigned short adapter_reset_attempt;
925 unsigned short adapter_reset_done;
926};
927
928/*
929 Define the FlashPoint Card Handle data type.
930*/
931
932#define FPOINT_BADCARD_HANDLE 0xFFFFFFFFL
933
934
935/*
936 Define the FlashPoint Information structure. This structure is defined
937 by the FlashPoint SCCB Manager.
938*/
939
940struct fpoint_info {
941 u32 base_addr; /* Bytes 0-3 */
942 bool present; /* Byte 4 */
943 unsigned char irq_ch; /* Byte 5 */
944 unsigned char scsi_id; /* Byte 6 */
945 unsigned char scsi_lun; /* Byte 7 */
946 u16 fw_rev; /* Bytes 8-9 */
947 u16 sync_ok; /* Bytes 10-11 */
948 u16 fast_ok; /* Bytes 12-13 */
949 u16 ultra_ok; /* Bytes 14-15 */
950 u16 discon_ok; /* Bytes 16-17 */
951 u16 wide_ok; /* Bytes 18-19 */
952 bool parity:1; /* Byte 20 Bit 0 */
953 bool wide:1; /* Byte 20 Bit 1 */
954 bool softreset:1; /* Byte 20 Bit 2 */
955 bool ext_trans_enable:1; /* Byte 20 Bit 3 */
956 bool low_term:1; /* Byte 20 Bit 4 */
957 bool high_term:1; /* Byte 20 Bit 5 */
958 bool report_underrun:1; /* Byte 20 Bit 6 */
959 bool scam_enabled:1; /* Byte 20 Bit 7 */
960 bool scam_lev2:1; /* Byte 21 Bit 0 */
961 unsigned char:7; /* Byte 21 Bits 1-7 */
962 unsigned char family; /* Byte 22 */
963 unsigned char bus_type; /* Byte 23 */
964 unsigned char model[3]; /* Bytes 24-26 */
965 unsigned char relative_cardnum; /* Byte 27 */
966 unsigned char rsvd[4]; /* Bytes 28-31 */
967 u32 os_rsvd; /* Bytes 32-35 */
968 unsigned char translation_info[4]; /* Bytes 36-39 */
969 u32 rsvd2[5]; /* Bytes 40-59 */
970 u32 sec_range; /* Bytes 60-63 */
971};
972
973/*
974 Define the BusLogic Driver Host Adapter structure.
975*/
976
977struct blogic_adapter {
978 struct Scsi_Host *scsi_host;
979 struct pci_dev *pci_device;
980 enum blogic_adapter_type adapter_type;
981 enum blogic_adapter_bus_type adapter_bus_type;
982 unsigned long io_addr;
983 unsigned long pci_addr;
984 unsigned short addr_count;
985 unsigned char host_no;
986 unsigned char model[9];
987 unsigned char fw_ver[6];
988 unsigned char full_model[18];
989 unsigned char bus;
990 unsigned char dev;
991 unsigned char irq_ch;
992 unsigned char scsi_id;
993 bool irq_acquired:1;
994 bool ext_trans_enable:1;
995 bool parity:1;
996 bool reset_enabled:1;
997 bool level_int:1;
998 bool wide:1;
999 bool differential:1;
1000 bool scam:1;
1001 bool ultra:1;
1002 bool ext_lun:1;
1003 bool terminfo_valid:1;
1004 bool low_term:1;
1005 bool high_term:1;
1006 bool strict_rr:1;
1007 bool scam_enabled:1;
1008 bool scam_lev2:1;
1009 bool adapter_initd:1;
1010 bool adapter_extreset:1;
1011 bool adapter_intern_err:1;
1012 bool processing_ccbs;
1013 volatile bool adapter_cmd_complete;
1014 unsigned short adapter_sglimit;
1015 unsigned short drvr_sglimit;
1016 unsigned short maxdev;
1017 unsigned short maxlun;
1018 unsigned short mbox_count;
1019 unsigned short initccbs;
1020 unsigned short inc_ccbs;
1021 unsigned short alloc_ccbs;
1022 unsigned short drvr_qdepth;
1023 unsigned short adapter_qdepth;
1024 unsigned short untag_qdepth;
1025 unsigned short common_qdepth;
1026 unsigned short bus_settle_time;
1027 unsigned short sync_ok;
1028 unsigned short fast_ok;
1029 unsigned short ultra_ok;
1030 unsigned short wide_ok;
1031 unsigned short discon_ok;
1032 unsigned short tagq_ok;
1033 unsigned short ext_resets;
1034 unsigned short adapter_intern_errors;
1035 unsigned short tgt_count;
1036 unsigned short msgbuflen;
1037 u32 bios_addr;
1038 struct blogic_drvr_options *drvr_opts;
1039 struct fpoint_info fpinfo;
1040 void *cardhandle;
1041 struct list_head host_list;
1042 struct blogic_ccb *all_ccbs;
1043 struct blogic_ccb *free_ccbs;
1044 struct blogic_ccb *firstccb;
1045 struct blogic_ccb *lastccb;
1046 struct blogic_ccb *bdr_pend[BLOGIC_MAXDEV];
1047 struct blogic_tgt_flags tgt_flags[BLOGIC_MAXDEV];
1048 unsigned char qdepth[BLOGIC_MAXDEV];
1049 unsigned char sync_period[BLOGIC_MAXDEV];
1050 unsigned char sync_offset[BLOGIC_MAXDEV];
1051 unsigned char active_cmds[BLOGIC_MAXDEV];
1052 unsigned int cmds_since_rst[BLOGIC_MAXDEV];
1053 unsigned long last_seqpoint[BLOGIC_MAXDEV];
1054 unsigned long last_resettried[BLOGIC_MAXDEV];
1055 unsigned long last_resetdone[BLOGIC_MAXDEV];
1056 struct blogic_outbox *first_outbox;
1057 struct blogic_outbox *last_outbox;
1058 struct blogic_outbox *next_outbox;
1059 struct blogic_inbox *first_inbox;
1060 struct blogic_inbox *last_inbox;
1061 struct blogic_inbox *next_inbox;
1062 struct blogic_tgt_stats tgt_stats[BLOGIC_MAXDEV];
1063 unsigned char *mbox_space;
1064 dma_addr_t mbox_space_handle;
1065 unsigned int mbox_sz;
1066 unsigned long ccb_offset;
1067 char msgbuf[BLOGIC_MSGBUF_SIZE];
1068};
1069
1070/*
1071 Define a structure for the BIOS Disk Parameters.
1072*/
1073
1074struct bios_diskparam {
1075 int heads;
1076 int sectors;
1077 int cylinders;
1078};
1079
1080/*
1081 Define a structure for the SCSI Inquiry command results.
1082*/
1083
1084struct scsi_inquiry {
1085 unsigned char devtype:5; /* Byte 0 Bits 0-4 */
1086 unsigned char dev_qual:3; /* Byte 0 Bits 5-7 */
1087 unsigned char dev_modifier:7; /* Byte 1 Bits 0-6 */
1088 bool rmb:1; /* Byte 1 Bit 7 */
1089 unsigned char ansi_ver:3; /* Byte 2 Bits 0-2 */
1090 unsigned char ecma_ver:3; /* Byte 2 Bits 3-5 */
1091 unsigned char iso_ver:2; /* Byte 2 Bits 6-7 */
1092 unsigned char resp_fmt:4; /* Byte 3 Bits 0-3 */
1093 unsigned char:2; /* Byte 3 Bits 4-5 */
1094 bool TrmIOP:1; /* Byte 3 Bit 6 */
1095 bool AENC:1; /* Byte 3 Bit 7 */
1096 unsigned char addl_len; /* Byte 4 */
1097 unsigned char:8; /* Byte 5 */
1098 unsigned char:8; /* Byte 6 */
1099 bool SftRe:1; /* Byte 7 Bit 0 */
1100 bool CmdQue:1; /* Byte 7 Bit 1 */
1101 bool:1; /* Byte 7 Bit 2 */
1102 bool linked:1; /* Byte 7 Bit 3 */
1103 bool sync:1; /* Byte 7 Bit 4 */
1104 bool WBus16:1; /* Byte 7 Bit 5 */
1105 bool WBus32:1; /* Byte 7 Bit 6 */
1106 bool RelAdr:1; /* Byte 7 Bit 7 */
1107 unsigned char vendor[8]; /* Bytes 8-15 */
1108 unsigned char product[16]; /* Bytes 16-31 */
1109 unsigned char product_rev[4]; /* Bytes 32-35 */
1110};
1111
1112
1113/*
1114 Define functions to provide an abstraction for reading and writing the
1115 Host Adapter I/O Registers.
1116*/
1117
1118static inline void blogic_busreset(struct blogic_adapter *adapter)
1119{
1120 union blogic_cntrl_reg cr;
1121 cr.all = 0;
1122 cr.cr.bus_reset = true;
1123 outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
1124}
1125
1126static inline void blogic_intreset(struct blogic_adapter *adapter)
1127{
1128 union blogic_cntrl_reg cr;
1129 cr.all = 0;
1130 cr.cr.int_reset = true;
1131 outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
1132}
1133
1134static inline void blogic_softreset(struct blogic_adapter *adapter)
1135{
1136 union blogic_cntrl_reg cr;
1137 cr.all = 0;
1138 cr.cr.soft_reset = true;
1139 outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
1140}
1141
1142static inline void blogic_hardreset(struct blogic_adapter *adapter)
1143{
1144 union blogic_cntrl_reg cr;
1145 cr.all = 0;
1146 cr.cr.hard_reset = true;
1147 outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
1148}
1149
1150static inline unsigned char blogic_rdstatus(struct blogic_adapter *adapter)
1151{
1152 return inb(adapter->io_addr + BLOGIC_STATUS_REG);
1153}
1154
1155static inline void blogic_setcmdparam(struct blogic_adapter *adapter,
1156 unsigned char value)
1157{
1158 outb(value, adapter->io_addr + BLOGIC_CMD_PARM_REG);
1159}
1160
1161static inline unsigned char blogic_rddatain(struct blogic_adapter *adapter)
1162{
1163 return inb(adapter->io_addr + BLOGIC_DATAIN_REG);
1164}
1165
1166static inline unsigned char blogic_rdint(struct blogic_adapter *adapter)
1167{
1168 return inb(adapter->io_addr + BLOGIC_INT_REG);
1169}
1170
1171static inline unsigned char blogic_rdgeom(struct blogic_adapter *adapter)
1172{
1173 return inb(adapter->io_addr + BLOGIC_GEOMETRY_REG);
1174}
1175
1176/*
1177 blogic_execmbox issues an Execute Mailbox Command, which
1178 notifies the Host Adapter that an entry has been made in an Outgoing
1179 Mailbox.
1180*/
1181
1182static inline void blogic_execmbox(struct blogic_adapter *adapter)
1183{
1184 blogic_setcmdparam(adapter, BLOGIC_EXEC_MBOX_CMD);
1185}
1186
1187/*
1188 blogic_delay waits for Seconds to elapse.
1189*/
1190
1191static inline void blogic_delay(int seconds)
1192{
1193 mdelay(1000 * seconds);
1194}
1195
1196/*
1197 virt_to_32bit_virt maps between Kernel Virtual Addresses and
1198 32 bit Kernel Virtual Addresses. This avoids compilation warnings
1199 on 64 bit architectures.
1200*/
1201
1202static inline u32 virt_to_32bit_virt(void *virt_addr)
1203{
1204 return (u32) (unsigned long) virt_addr;
1205}
1206
1207/*
1208 blogic_inc_count increments counter by 1, stopping at
1209 65535 rather than wrapping around to 0.
1210*/
1211
1212static inline void blogic_inc_count(unsigned short *count)
1213{
1214 if (*count < 65535)
1215 (*count)++;
1216}
1217
1218/*
1219 blogic_addcount increments Byte Counter by Amount.
1220*/
1221
1222static inline void blogic_addcount(struct blogic_byte_count *bytecount,
1223 unsigned int amount)
1224{
1225 bytecount->units += amount;
1226 if (bytecount->units > 999999999) {
1227 bytecount->units -= 1000000000;
1228 bytecount->billions++;
1229 }
1230}
1231
1232/*
1233 blogic_incszbucket increments the Bucket for Amount.
1234*/
1235
1236static inline void blogic_incszbucket(unsigned int *cmdsz_buckets,
1237 unsigned int amount)
1238{
1239 int index = 0;
1240 if (amount < 8 * 1024) {
1241 if (amount < 2 * 1024)
1242 index = (amount < 1 * 1024 ? 0 : 1);
1243 else
1244 index = (amount < 4 * 1024 ? 2 : 3);
1245 } else if (amount < 128 * 1024) {
1246 if (amount < 32 * 1024)
1247 index = (amount < 16 * 1024 ? 4 : 5);
1248 else
1249 index = (amount < 64 * 1024 ? 6 : 7);
1250 } else
1251 index = (amount < 256 * 1024 ? 8 : 9);
1252 cmdsz_buckets[index]++;
1253}
1254
1255/*
1256 Define the version number of the FlashPoint Firmware (SCCB Manager).
1257*/
1258
1259#define FLASHPOINT_FW_VER "5.02"
1260
1261/*
1262 Define the possible return values from FlashPoint_HandleInterrupt.
1263*/
1264
1265#define FPOINT_NORMAL_INT 0x00
1266#define FPOINT_INTERN_ERR 0xFE
1267#define FPOINT_EXT_RESET 0xFF
1268
1269/*
1270 Define prototypes for the forward referenced BusLogic Driver
1271 Internal Functions.
1272*/
1273
1274static const char *blogic_drvr_info(struct Scsi_Host *);
1275static int blogic_qcmd(struct Scsi_Host *h, struct scsi_cmnd *);
1276static int blogic_diskparam(struct scsi_device *, struct block_device *, sector_t, int *);
1277static int blogic_slaveconfig(struct scsi_device *);
1278static void blogic_qcompleted_ccb(struct blogic_ccb *);
1279static irqreturn_t blogic_inthandler(int, void *);
1280static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
1281static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter *, ...);
1282static int __init blogic_setup(char *);
1283
1284#endif /* _BUSLOGIC_H */