Loading...
1/*
2 * Watchdog Timer Driver
3 * for ITE IT87xx Environment Control - Low Pin Count Input / Output
4 *
5 * (c) Copyright 2007 Oliver Schuster <olivers137@aol.com>
6 *
7 * Based on softdog.c by Alan Cox,
8 * 83977f_wdt.c by Jose Goncalves,
9 * it87.c by Chris Gauthron, Jean Delvare
10 *
11 * Data-sheets: Publicly available at the ITE website
12 * http://www.ite.com.tw/
13 *
14 * Support of the watchdog timers, which are available on
15 * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721 and IT8726.
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
21 *
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
26 *
27 * You should have received a copy of the GNU General Public License
28 * along with this program; if not, write to the Free Software
29 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 */
31
32#include <linux/module.h>
33#include <linux/moduleparam.h>
34#include <linux/types.h>
35#include <linux/kernel.h>
36#include <linux/fs.h>
37#include <linux/miscdevice.h>
38#include <linux/init.h>
39#include <linux/ioport.h>
40#include <linux/watchdog.h>
41#include <linux/notifier.h>
42#include <linux/reboot.h>
43#include <linux/uaccess.h>
44#include <linux/io.h>
45
46#include <asm/system.h>
47
48#define WATCHDOG_VERSION "1.14"
49#define WATCHDOG_NAME "IT87 WDT"
50#define PFX WATCHDOG_NAME ": "
51#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
52#define WD_MAGIC 'V'
53
54/* Defaults for Module Parameter */
55#define DEFAULT_NOGAMEPORT 0
56#define DEFAULT_EXCLUSIVE 1
57#define DEFAULT_TIMEOUT 60
58#define DEFAULT_TESTMODE 0
59#define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT
60
61/* IO Ports */
62#define REG 0x2e
63#define VAL 0x2f
64
65/* Logical device Numbers LDN */
66#define GPIO 0x07
67#define GAMEPORT 0x09
68#define CIR 0x0a
69
70/* Configuration Registers and Functions */
71#define LDNREG 0x07
72#define CHIPID 0x20
73#define CHIPREV 0x22
74#define ACTREG 0x30
75#define BASEREG 0x60
76
77/* Chip Id numbers */
78#define NO_DEV_ID 0xffff
79#define IT8702_ID 0x8702
80#define IT8705_ID 0x8705
81#define IT8712_ID 0x8712
82#define IT8716_ID 0x8716
83#define IT8718_ID 0x8718
84#define IT8720_ID 0x8720
85#define IT8721_ID 0x8721
86#define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */
87
88/* GPIO Configuration Registers LDN=0x07 */
89#define WDTCTRL 0x71
90#define WDTCFG 0x72
91#define WDTVALLSB 0x73
92#define WDTVALMSB 0x74
93
94/* GPIO Bits WDTCTRL */
95#define WDT_CIRINT 0x80
96#define WDT_MOUSEINT 0x40
97#define WDT_KYBINT 0x20
98#define WDT_GAMEPORT 0x10 /* not in it8718, it8720, it8721 */
99#define WDT_FORCE 0x02
100#define WDT_ZERO 0x01
101
102/* GPIO Bits WDTCFG */
103#define WDT_TOV1 0x80
104#define WDT_KRST 0x40
105#define WDT_TOVE 0x20
106#define WDT_PWROK 0x10 /* not in it8721 */
107#define WDT_INT_MASK 0x0f
108
109/* CIR Configuration Register LDN=0x0a */
110#define CIR_ILS 0x70
111
112/* The default Base address is not always available, we use this */
113#define CIR_BASE 0x0208
114
115/* CIR Controller */
116#define CIR_DR(b) (b)
117#define CIR_IER(b) (b + 1)
118#define CIR_RCR(b) (b + 2)
119#define CIR_TCR1(b) (b + 3)
120#define CIR_TCR2(b) (b + 4)
121#define CIR_TSR(b) (b + 5)
122#define CIR_RSR(b) (b + 6)
123#define CIR_BDLR(b) (b + 5)
124#define CIR_BDHR(b) (b + 6)
125#define CIR_IIR(b) (b + 7)
126
127/* Default Base address of Game port */
128#define GP_BASE_DEFAULT 0x0201
129
130/* wdt_status */
131#define WDTS_TIMER_RUN 0
132#define WDTS_DEV_OPEN 1
133#define WDTS_KEEPALIVE 2
134#define WDTS_LOCKED 3
135#define WDTS_USE_GP 4
136#define WDTS_EXPECTED 5
137
138static unsigned int base, gpact, ciract, max_units, chip_type;
139static unsigned long wdt_status;
140
141static int nogameport = DEFAULT_NOGAMEPORT;
142static int exclusive = DEFAULT_EXCLUSIVE;
143static int timeout = DEFAULT_TIMEOUT;
144static int testmode = DEFAULT_TESTMODE;
145static int nowayout = DEFAULT_NOWAYOUT;
146
147module_param(nogameport, int, 0);
148MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default="
149 __MODULE_STRING(DEFAULT_NOGAMEPORT));
150module_param(exclusive, int, 0);
151MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default="
152 __MODULE_STRING(DEFAULT_EXCLUSIVE));
153module_param(timeout, int, 0);
154MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default="
155 __MODULE_STRING(DEFAULT_TIMEOUT));
156module_param(testmode, int, 0);
157MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default="
158 __MODULE_STRING(DEFAULT_TESTMODE));
159module_param(nowayout, int, 0);
160MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="
161 __MODULE_STRING(WATCHDOG_NOWAYOUT));
162
163/* Superio Chip */
164
165static inline int superio_enter(void)
166{
167 /*
168 * Try to reserve REG and REG + 1 for exclusive access.
169 */
170 if (!request_muxed_region(REG, 2, WATCHDOG_NAME))
171 return -EBUSY;
172
173 outb(0x87, REG);
174 outb(0x01, REG);
175 outb(0x55, REG);
176 outb(0x55, REG);
177 return 0;
178}
179
180static inline void superio_exit(void)
181{
182 outb(0x02, REG);
183 outb(0x02, VAL);
184 release_region(REG, 2);
185}
186
187static inline void superio_select(int ldn)
188{
189 outb(LDNREG, REG);
190 outb(ldn, VAL);
191}
192
193static inline int superio_inb(int reg)
194{
195 outb(reg, REG);
196 return inb(VAL);
197}
198
199static inline void superio_outb(int val, int reg)
200{
201 outb(reg, REG);
202 outb(val, VAL);
203}
204
205static inline int superio_inw(int reg)
206{
207 int val;
208 outb(reg++, REG);
209 val = inb(VAL) << 8;
210 outb(reg, REG);
211 val |= inb(VAL);
212 return val;
213}
214
215static inline void superio_outw(int val, int reg)
216{
217 outb(reg++, REG);
218 outb(val >> 8, VAL);
219 outb(reg, REG);
220 outb(val, VAL);
221}
222
223/* Internal function, should be called after superio_select(GPIO) */
224static void wdt_update_timeout(void)
225{
226 unsigned char cfg = WDT_KRST;
227 int tm = timeout;
228
229 if (testmode)
230 cfg = 0;
231
232 if (tm <= max_units)
233 cfg |= WDT_TOV1;
234 else
235 tm /= 60;
236
237 if (chip_type != IT8721_ID)
238 cfg |= WDT_PWROK;
239
240 superio_outb(cfg, WDTCFG);
241 superio_outb(tm, WDTVALLSB);
242 if (max_units > 255)
243 superio_outb(tm>>8, WDTVALMSB);
244}
245
246static int wdt_round_time(int t)
247{
248 t += 59;
249 t -= t % 60;
250 return t;
251}
252
253/* watchdog timer handling */
254
255static void wdt_keepalive(void)
256{
257 if (test_bit(WDTS_USE_GP, &wdt_status))
258 inb(base);
259 else
260 /* The timer reloads with around 5 msec delay */
261 outb(0x55, CIR_DR(base));
262 set_bit(WDTS_KEEPALIVE, &wdt_status);
263}
264
265static int wdt_start(void)
266{
267 int ret = superio_enter();
268 if (ret)
269 return ret;
270
271 superio_select(GPIO);
272 if (test_bit(WDTS_USE_GP, &wdt_status))
273 superio_outb(WDT_GAMEPORT, WDTCTRL);
274 else
275 superio_outb(WDT_CIRINT, WDTCTRL);
276 wdt_update_timeout();
277
278 superio_exit();
279
280 return 0;
281}
282
283static int wdt_stop(void)
284{
285 int ret = superio_enter();
286 if (ret)
287 return ret;
288
289 superio_select(GPIO);
290 superio_outb(0x00, WDTCTRL);
291 superio_outb(WDT_TOV1, WDTCFG);
292 superio_outb(0x00, WDTVALLSB);
293 if (max_units > 255)
294 superio_outb(0x00, WDTVALMSB);
295
296 superio_exit();
297 return 0;
298}
299
300/**
301 * wdt_set_timeout - set a new timeout value with watchdog ioctl
302 * @t: timeout value in seconds
303 *
304 * The hardware device has a 8 or 16 bit watchdog timer (depends on
305 * chip version) that can be configured to count seconds or minutes.
306 *
307 * Used within WDIOC_SETTIMEOUT watchdog device ioctl.
308 */
309
310static int wdt_set_timeout(int t)
311{
312 if (t < 1 || t > max_units * 60)
313 return -EINVAL;
314
315 if (t > max_units)
316 timeout = wdt_round_time(t);
317 else
318 timeout = t;
319
320 if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
321 int ret = superio_enter();
322 if (ret)
323 return ret;
324
325 superio_select(GPIO);
326 wdt_update_timeout();
327 superio_exit();
328 }
329 return 0;
330}
331
332/**
333 * wdt_get_status - determines the status supported by watchdog ioctl
334 * @status: status returned to user space
335 *
336 * The status bit of the device does not allow to distinguish
337 * between a regular system reset and a watchdog forced reset.
338 * But, in test mode it is useful, so it is supported through
339 * WDIOC_GETSTATUS watchdog ioctl. Additionally the driver
340 * reports the keepalive signal and the acception of the magic.
341 *
342 * Used within WDIOC_GETSTATUS watchdog device ioctl.
343 */
344
345static int wdt_get_status(int *status)
346{
347 *status = 0;
348 if (testmode) {
349 int ret = superio_enter();
350 if (ret)
351 return ret;
352
353 superio_select(GPIO);
354 if (superio_inb(WDTCTRL) & WDT_ZERO) {
355 superio_outb(0x00, WDTCTRL);
356 clear_bit(WDTS_TIMER_RUN, &wdt_status);
357 *status |= WDIOF_CARDRESET;
358 }
359
360 superio_exit();
361 }
362 if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status))
363 *status |= WDIOF_KEEPALIVEPING;
364 if (test_bit(WDTS_EXPECTED, &wdt_status))
365 *status |= WDIOF_MAGICCLOSE;
366 return 0;
367}
368
369/* /dev/watchdog handling */
370
371/**
372 * wdt_open - watchdog file_operations .open
373 * @inode: inode of the device
374 * @file: file handle to the device
375 *
376 * The watchdog timer starts by opening the device.
377 *
378 * Used within the file operation of the watchdog device.
379 */
380
381static int wdt_open(struct inode *inode, struct file *file)
382{
383 if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status))
384 return -EBUSY;
385 if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) {
386 int ret;
387 if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status))
388 __module_get(THIS_MODULE);
389
390 ret = wdt_start();
391 if (ret) {
392 clear_bit(WDTS_LOCKED, &wdt_status);
393 clear_bit(WDTS_TIMER_RUN, &wdt_status);
394 clear_bit(WDTS_DEV_OPEN, &wdt_status);
395 return ret;
396 }
397 }
398 return nonseekable_open(inode, file);
399}
400
401/**
402 * wdt_release - watchdog file_operations .release
403 * @inode: inode of the device
404 * @file: file handle to the device
405 *
406 * Closing the watchdog device either stops the watchdog timer
407 * or in the case, that nowayout is set or the magic character
408 * wasn't written, a critical warning about an running watchdog
409 * timer is given.
410 *
411 * Used within the file operation of the watchdog device.
412 */
413
414static int wdt_release(struct inode *inode, struct file *file)
415{
416 if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
417 if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) {
418 int ret = wdt_stop();
419 if (ret) {
420 /*
421 * Stop failed. Just keep the watchdog alive
422 * and hope nothing bad happens.
423 */
424 set_bit(WDTS_EXPECTED, &wdt_status);
425 wdt_keepalive();
426 return ret;
427 }
428 clear_bit(WDTS_TIMER_RUN, &wdt_status);
429 } else {
430 wdt_keepalive();
431 printk(KERN_CRIT PFX
432 "unexpected close, not stopping watchdog!\n");
433 }
434 }
435 clear_bit(WDTS_DEV_OPEN, &wdt_status);
436 return 0;
437}
438
439/**
440 * wdt_write - watchdog file_operations .write
441 * @file: file handle to the watchdog
442 * @buf: buffer to write
443 * @count: count of bytes
444 * @ppos: pointer to the position to write. No seeks allowed
445 *
446 * A write to a watchdog device is defined as a keepalive signal. Any
447 * write of data will do, as we don't define content meaning.
448 *
449 * Used within the file operation of the watchdog device.
450 */
451
452static ssize_t wdt_write(struct file *file, const char __user *buf,
453 size_t count, loff_t *ppos)
454{
455 if (count) {
456 clear_bit(WDTS_EXPECTED, &wdt_status);
457 wdt_keepalive();
458 }
459 if (!nowayout) {
460 size_t ofs;
461
462 /* note: just in case someone wrote the magic character long ago */
463 for (ofs = 0; ofs != count; ofs++) {
464 char c;
465 if (get_user(c, buf + ofs))
466 return -EFAULT;
467 if (c == WD_MAGIC)
468 set_bit(WDTS_EXPECTED, &wdt_status);
469 }
470 }
471 return count;
472}
473
474static const struct watchdog_info ident = {
475 .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
476 .firmware_version = 1,
477 .identity = WATCHDOG_NAME,
478};
479
480/**
481 * wdt_ioctl - watchdog file_operations .unlocked_ioctl
482 * @file: file handle to the device
483 * @cmd: watchdog command
484 * @arg: argument pointer
485 *
486 * The watchdog API defines a common set of functions for all watchdogs
487 * according to their available features.
488 *
489 * Used within the file operation of the watchdog device.
490 */
491
492static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
493{
494 int rc = 0, status, new_options, new_timeout;
495 union {
496 struct watchdog_info __user *ident;
497 int __user *i;
498 } uarg;
499
500 uarg.i = (int __user *)arg;
501
502 switch (cmd) {
503 case WDIOC_GETSUPPORT:
504 return copy_to_user(uarg.ident,
505 &ident, sizeof(ident)) ? -EFAULT : 0;
506
507 case WDIOC_GETSTATUS:
508 rc = wdt_get_status(&status);
509 if (rc)
510 return rc;
511 return put_user(status, uarg.i);
512
513 case WDIOC_GETBOOTSTATUS:
514 return put_user(0, uarg.i);
515
516 case WDIOC_KEEPALIVE:
517 wdt_keepalive();
518 return 0;
519
520 case WDIOC_SETOPTIONS:
521 if (get_user(new_options, uarg.i))
522 return -EFAULT;
523
524 switch (new_options) {
525 case WDIOS_DISABLECARD:
526 if (test_bit(WDTS_TIMER_RUN, &wdt_status)) {
527 rc = wdt_stop();
528 if (rc)
529 return rc;
530 }
531 clear_bit(WDTS_TIMER_RUN, &wdt_status);
532 return 0;
533
534 case WDIOS_ENABLECARD:
535 if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) {
536 rc = wdt_start();
537 if (rc) {
538 clear_bit(WDTS_TIMER_RUN, &wdt_status);
539 return rc;
540 }
541 }
542 return 0;
543
544 default:
545 return -EFAULT;
546 }
547
548 case WDIOC_SETTIMEOUT:
549 if (get_user(new_timeout, uarg.i))
550 return -EFAULT;
551 rc = wdt_set_timeout(new_timeout);
552 case WDIOC_GETTIMEOUT:
553 if (put_user(timeout, uarg.i))
554 return -EFAULT;
555 return rc;
556
557 default:
558 return -ENOTTY;
559 }
560}
561
562static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
563 void *unused)
564{
565 if (code == SYS_DOWN || code == SYS_HALT)
566 wdt_stop();
567 return NOTIFY_DONE;
568}
569
570static const struct file_operations wdt_fops = {
571 .owner = THIS_MODULE,
572 .llseek = no_llseek,
573 .write = wdt_write,
574 .unlocked_ioctl = wdt_ioctl,
575 .open = wdt_open,
576 .release = wdt_release,
577};
578
579static struct miscdevice wdt_miscdev = {
580 .minor = WATCHDOG_MINOR,
581 .name = "watchdog",
582 .fops = &wdt_fops,
583};
584
585static struct notifier_block wdt_notifier = {
586 .notifier_call = wdt_notify_sys,
587};
588
589static int __init it87_wdt_init(void)
590{
591 int rc = 0;
592 int try_gameport = !nogameport;
593 u8 chip_rev;
594 int gp_rreq_fail = 0;
595
596 wdt_status = 0;
597
598 rc = superio_enter();
599 if (rc)
600 return rc;
601
602 chip_type = superio_inw(CHIPID);
603 chip_rev = superio_inb(CHIPREV) & 0x0f;
604 superio_exit();
605
606 switch (chip_type) {
607 case IT8702_ID:
608 max_units = 255;
609 break;
610 case IT8712_ID:
611 max_units = (chip_rev < 8) ? 255 : 65535;
612 break;
613 case IT8716_ID:
614 case IT8726_ID:
615 max_units = 65535;
616 break;
617 case IT8718_ID:
618 case IT8720_ID:
619 case IT8721_ID:
620 max_units = 65535;
621 try_gameport = 0;
622 break;
623 case IT8705_ID:
624 printk(KERN_ERR PFX
625 "Unsupported Chip found, Chip %04x Revision %02x\n",
626 chip_type, chip_rev);
627 return -ENODEV;
628 case NO_DEV_ID:
629 printk(KERN_ERR PFX "no device\n");
630 return -ENODEV;
631 default:
632 printk(KERN_ERR PFX
633 "Unknown Chip found, Chip %04x Revision %04x\n",
634 chip_type, chip_rev);
635 return -ENODEV;
636 }
637
638 rc = superio_enter();
639 if (rc)
640 return rc;
641
642 superio_select(GPIO);
643 superio_outb(WDT_TOV1, WDTCFG);
644 superio_outb(0x00, WDTCTRL);
645
646 /* First try to get Gameport support */
647 if (try_gameport) {
648 superio_select(GAMEPORT);
649 base = superio_inw(BASEREG);
650 if (!base) {
651 base = GP_BASE_DEFAULT;
652 superio_outw(base, BASEREG);
653 }
654 gpact = superio_inb(ACTREG);
655 superio_outb(0x01, ACTREG);
656 if (request_region(base, 1, WATCHDOG_NAME))
657 set_bit(WDTS_USE_GP, &wdt_status);
658 else
659 gp_rreq_fail = 1;
660 }
661
662 /* If we haven't Gameport support, try to get CIR support */
663 if (!test_bit(WDTS_USE_GP, &wdt_status)) {
664 if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) {
665 if (gp_rreq_fail)
666 printk(KERN_ERR PFX
667 "I/O Address 0x%04x and 0x%04x"
668 " already in use\n", base, CIR_BASE);
669 else
670 printk(KERN_ERR PFX
671 "I/O Address 0x%04x already in use\n",
672 CIR_BASE);
673 rc = -EIO;
674 goto err_out;
675 }
676 base = CIR_BASE;
677
678 superio_select(CIR);
679 superio_outw(base, BASEREG);
680 superio_outb(0x00, CIR_ILS);
681 ciract = superio_inb(ACTREG);
682 superio_outb(0x01, ACTREG);
683 if (gp_rreq_fail) {
684 superio_select(GAMEPORT);
685 superio_outb(gpact, ACTREG);
686 }
687 }
688
689 if (timeout < 1 || timeout > max_units * 60) {
690 timeout = DEFAULT_TIMEOUT;
691 printk(KERN_WARNING PFX
692 "Timeout value out of range, use default %d sec\n",
693 DEFAULT_TIMEOUT);
694 }
695
696 if (timeout > max_units)
697 timeout = wdt_round_time(timeout);
698
699 rc = register_reboot_notifier(&wdt_notifier);
700 if (rc) {
701 printk(KERN_ERR PFX
702 "Cannot register reboot notifier (err=%d)\n", rc);
703 goto err_out_region;
704 }
705
706 rc = misc_register(&wdt_miscdev);
707 if (rc) {
708 printk(KERN_ERR PFX
709 "Cannot register miscdev on minor=%d (err=%d)\n",
710 wdt_miscdev.minor, rc);
711 goto err_out_reboot;
712 }
713
714 /* Initialize CIR to use it as keepalive source */
715 if (!test_bit(WDTS_USE_GP, &wdt_status)) {
716 outb(0x00, CIR_RCR(base));
717 outb(0xc0, CIR_TCR1(base));
718 outb(0x5c, CIR_TCR2(base));
719 outb(0x10, CIR_IER(base));
720 outb(0x00, CIR_BDHR(base));
721 outb(0x01, CIR_BDLR(base));
722 outb(0x09, CIR_IER(base));
723 }
724
725 printk(KERN_INFO PFX "Chip IT%04x revision %d initialized. "
726 "timeout=%d sec (nowayout=%d testmode=%d exclusive=%d "
727 "nogameport=%d)\n", chip_type, chip_rev, timeout,
728 nowayout, testmode, exclusive, nogameport);
729
730 superio_exit();
731 return 0;
732
733err_out_reboot:
734 unregister_reboot_notifier(&wdt_notifier);
735err_out_region:
736 release_region(base, test_bit(WDTS_USE_GP, &wdt_status) ? 1 : 8);
737 if (!test_bit(WDTS_USE_GP, &wdt_status)) {
738 superio_select(CIR);
739 superio_outb(ciract, ACTREG);
740 }
741err_out:
742 if (try_gameport) {
743 superio_select(GAMEPORT);
744 superio_outb(gpact, ACTREG);
745 }
746
747 superio_exit();
748 return rc;
749}
750
751static void __exit it87_wdt_exit(void)
752{
753 if (superio_enter() == 0) {
754 superio_select(GPIO);
755 superio_outb(0x00, WDTCTRL);
756 superio_outb(0x00, WDTCFG);
757 superio_outb(0x00, WDTVALLSB);
758 if (max_units > 255)
759 superio_outb(0x00, WDTVALMSB);
760 if (test_bit(WDTS_USE_GP, &wdt_status)) {
761 superio_select(GAMEPORT);
762 superio_outb(gpact, ACTREG);
763 } else {
764 superio_select(CIR);
765 superio_outb(ciract, ACTREG);
766 }
767 superio_exit();
768 }
769
770 misc_deregister(&wdt_miscdev);
771 unregister_reboot_notifier(&wdt_notifier);
772 release_region(base, test_bit(WDTS_USE_GP, &wdt_status) ? 1 : 8);
773}
774
775module_init(it87_wdt_init);
776module_exit(it87_wdt_exit);
777
778MODULE_AUTHOR("Oliver Schuster");
779MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O");
780MODULE_LICENSE("GPL");
781MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Watchdog Timer Driver
4 * for ITE IT87xx Environment Control - Low Pin Count Input / Output
5 *
6 * (c) Copyright 2007 Oliver Schuster <olivers137@aol.com>
7 *
8 * Based on softdog.c by Alan Cox,
9 * 83977f_wdt.c by Jose Goncalves,
10 * it87.c by Chris Gauthron, Jean Delvare
11 *
12 * Data-sheets: Publicly available at the ITE website
13 * http://www.ite.com.tw/
14 *
15 * Support of the watchdog timers, which are available on
16 * IT8607, IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686,
17 * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728,
18 * and IT8783.
19 */
20
21#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
22
23#include <linux/init.h>
24#include <linux/io.h>
25#include <linux/kernel.h>
26#include <linux/module.h>
27#include <linux/moduleparam.h>
28#include <linux/types.h>
29#include <linux/watchdog.h>
30
31#define WATCHDOG_NAME "IT87 WDT"
32
33/* Defaults for Module Parameter */
34#define DEFAULT_TIMEOUT 60
35#define DEFAULT_TESTMODE 0
36#define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT
37
38/* IO Ports */
39#define REG 0x2e
40#define VAL 0x2f
41
42/* Logical device Numbers LDN */
43#define GPIO 0x07
44
45/* Configuration Registers and Functions */
46#define LDNREG 0x07
47#define CHIPID 0x20
48#define CHIPREV 0x22
49
50/* Chip Id numbers */
51#define NO_DEV_ID 0xffff
52#define IT8607_ID 0x8607
53#define IT8620_ID 0x8620
54#define IT8622_ID 0x8622
55#define IT8625_ID 0x8625
56#define IT8628_ID 0x8628
57#define IT8655_ID 0x8655
58#define IT8665_ID 0x8665
59#define IT8686_ID 0x8686
60#define IT8702_ID 0x8702
61#define IT8705_ID 0x8705
62#define IT8712_ID 0x8712
63#define IT8716_ID 0x8716
64#define IT8718_ID 0x8718
65#define IT8720_ID 0x8720
66#define IT8721_ID 0x8721
67#define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */
68#define IT8728_ID 0x8728
69#define IT8783_ID 0x8783
70#define IT8786_ID 0x8786
71
72/* GPIO Configuration Registers LDN=0x07 */
73#define WDTCTRL 0x71
74#define WDTCFG 0x72
75#define WDTVALLSB 0x73
76#define WDTVALMSB 0x74
77
78/* GPIO Bits WDTCFG */
79#define WDT_TOV1 0x80
80#define WDT_KRST 0x40
81#define WDT_TOVE 0x20
82#define WDT_PWROK 0x10 /* not in it8721 */
83#define WDT_INT_MASK 0x0f
84
85static unsigned int max_units, chip_type;
86
87static unsigned int timeout = DEFAULT_TIMEOUT;
88static int testmode = DEFAULT_TESTMODE;
89static bool nowayout = DEFAULT_NOWAYOUT;
90
91module_param(timeout, int, 0);
92MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default="
93 __MODULE_STRING(DEFAULT_TIMEOUT));
94module_param(testmode, int, 0);
95MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default="
96 __MODULE_STRING(DEFAULT_TESTMODE));
97module_param(nowayout, bool, 0);
98MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="
99 __MODULE_STRING(WATCHDOG_NOWAYOUT));
100
101/* Superio Chip */
102
103static inline int superio_enter(void)
104{
105 /*
106 * Try to reserve REG and REG + 1 for exclusive access.
107 */
108 if (!request_muxed_region(REG, 2, WATCHDOG_NAME))
109 return -EBUSY;
110
111 outb(0x87, REG);
112 outb(0x01, REG);
113 outb(0x55, REG);
114 outb(0x55, REG);
115 return 0;
116}
117
118static inline void superio_exit(void)
119{
120 outb(0x02, REG);
121 outb(0x02, VAL);
122 release_region(REG, 2);
123}
124
125static inline void superio_select(int ldn)
126{
127 outb(LDNREG, REG);
128 outb(ldn, VAL);
129}
130
131static inline int superio_inb(int reg)
132{
133 outb(reg, REG);
134 return inb(VAL);
135}
136
137static inline void superio_outb(int val, int reg)
138{
139 outb(reg, REG);
140 outb(val, VAL);
141}
142
143static inline int superio_inw(int reg)
144{
145 int val;
146 outb(reg++, REG);
147 val = inb(VAL) << 8;
148 outb(reg, REG);
149 val |= inb(VAL);
150 return val;
151}
152
153static inline void superio_outw(int val, int reg)
154{
155 outb(reg++, REG);
156 outb(val >> 8, VAL);
157 outb(reg, REG);
158 outb(val, VAL);
159}
160
161/* Internal function, should be called after superio_select(GPIO) */
162static void _wdt_update_timeout(unsigned int t)
163{
164 unsigned char cfg = WDT_KRST;
165
166 if (testmode)
167 cfg = 0;
168
169 if (t <= max_units)
170 cfg |= WDT_TOV1;
171 else
172 t /= 60;
173
174 if (chip_type != IT8721_ID)
175 cfg |= WDT_PWROK;
176
177 superio_outb(cfg, WDTCFG);
178 superio_outb(t, WDTVALLSB);
179 if (max_units > 255)
180 superio_outb(t >> 8, WDTVALMSB);
181}
182
183static int wdt_update_timeout(unsigned int t)
184{
185 int ret;
186
187 ret = superio_enter();
188 if (ret)
189 return ret;
190
191 superio_select(GPIO);
192 _wdt_update_timeout(t);
193 superio_exit();
194
195 return 0;
196}
197
198static int wdt_round_time(int t)
199{
200 t += 59;
201 t -= t % 60;
202 return t;
203}
204
205/* watchdog timer handling */
206
207static int wdt_start(struct watchdog_device *wdd)
208{
209 return wdt_update_timeout(wdd->timeout);
210}
211
212static int wdt_stop(struct watchdog_device *wdd)
213{
214 return wdt_update_timeout(0);
215}
216
217/**
218 * wdt_set_timeout - set a new timeout value with watchdog ioctl
219 * @t: timeout value in seconds
220 *
221 * The hardware device has a 8 or 16 bit watchdog timer (depends on
222 * chip version) that can be configured to count seconds or minutes.
223 *
224 * Used within WDIOC_SETTIMEOUT watchdog device ioctl.
225 */
226
227static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
228{
229 int ret = 0;
230
231 if (t > max_units)
232 t = wdt_round_time(t);
233
234 wdd->timeout = t;
235
236 if (watchdog_hw_running(wdd))
237 ret = wdt_update_timeout(t);
238
239 return ret;
240}
241
242static const struct watchdog_info ident = {
243 .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
244 .firmware_version = 1,
245 .identity = WATCHDOG_NAME,
246};
247
248static const struct watchdog_ops wdt_ops = {
249 .owner = THIS_MODULE,
250 .start = wdt_start,
251 .stop = wdt_stop,
252 .set_timeout = wdt_set_timeout,
253};
254
255static struct watchdog_device wdt_dev = {
256 .info = &ident,
257 .ops = &wdt_ops,
258 .min_timeout = 1,
259};
260
261static int __init it87_wdt_init(void)
262{
263 u8 chip_rev;
264 int rc;
265
266 rc = superio_enter();
267 if (rc)
268 return rc;
269
270 chip_type = superio_inw(CHIPID);
271 chip_rev = superio_inb(CHIPREV) & 0x0f;
272 superio_exit();
273
274 switch (chip_type) {
275 case IT8702_ID:
276 max_units = 255;
277 break;
278 case IT8712_ID:
279 max_units = (chip_rev < 8) ? 255 : 65535;
280 break;
281 case IT8716_ID:
282 case IT8726_ID:
283 max_units = 65535;
284 break;
285 case IT8607_ID:
286 case IT8620_ID:
287 case IT8622_ID:
288 case IT8625_ID:
289 case IT8628_ID:
290 case IT8655_ID:
291 case IT8665_ID:
292 case IT8686_ID:
293 case IT8718_ID:
294 case IT8720_ID:
295 case IT8721_ID:
296 case IT8728_ID:
297 case IT8783_ID:
298 case IT8786_ID:
299 max_units = 65535;
300 break;
301 case IT8705_ID:
302 pr_err("Unsupported Chip found, Chip %04x Revision %02x\n",
303 chip_type, chip_rev);
304 return -ENODEV;
305 case NO_DEV_ID:
306 pr_err("no device\n");
307 return -ENODEV;
308 default:
309 pr_err("Unknown Chip found, Chip %04x Revision %04x\n",
310 chip_type, chip_rev);
311 return -ENODEV;
312 }
313
314 rc = superio_enter();
315 if (rc)
316 return rc;
317
318 superio_select(GPIO);
319 superio_outb(WDT_TOV1, WDTCFG);
320 superio_outb(0x00, WDTCTRL);
321 superio_exit();
322
323 if (timeout < 1 || timeout > max_units * 60) {
324 timeout = DEFAULT_TIMEOUT;
325 pr_warn("Timeout value out of range, use default %d sec\n",
326 DEFAULT_TIMEOUT);
327 }
328
329 if (timeout > max_units)
330 timeout = wdt_round_time(timeout);
331
332 wdt_dev.timeout = timeout;
333 wdt_dev.max_timeout = max_units * 60;
334
335 watchdog_stop_on_reboot(&wdt_dev);
336 rc = watchdog_register_device(&wdt_dev);
337 if (rc) {
338 pr_err("Cannot register watchdog device (err=%d)\n", rc);
339 return rc;
340 }
341
342 pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
343 chip_type, chip_rev, timeout, nowayout, testmode);
344
345 return 0;
346}
347
348static void __exit it87_wdt_exit(void)
349{
350 watchdog_unregister_device(&wdt_dev);
351}
352
353module_init(it87_wdt_init);
354module_exit(it87_wdt_exit);
355
356MODULE_AUTHOR("Oliver Schuster");
357MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O");
358MODULE_LICENSE("GPL");