Loading...
1#
2# USB Miscellaneous driver configuration
3#
4comment "USB Miscellaneous drivers"
5 depends on USB
6
7config USB_EMI62
8 tristate "EMI 6|2m USB Audio interface support"
9 depends on USB
10 ---help---
11 This driver loads firmware to Emagic EMI 6|2m low latency USB
12 Audio and Midi interface.
13
14 After firmware load the device is handled with standard linux
15 USB Audio driver.
16
17 This code is also available as a module ( = code which can be
18 inserted in and removed from the running kernel whenever you want).
19 The module will be called audio. If you want to compile it as a
20 module, say M here and read <file:Documentation/kbuild/modules.txt>.
21
22config USB_EMI26
23 tristate "EMI 2|6 USB Audio interface support"
24 depends on USB
25 ---help---
26 This driver loads firmware to Emagic EMI 2|6 low latency USB
27 Audio interface.
28
29 After firmware load the device is handled with standard linux
30 USB Audio driver.
31
32 To compile this driver as a module, choose M here: the
33 module will be called emi26.
34
35config USB_ADUTUX
36 tristate "ADU devices from Ontrak Control Systems"
37 depends on USB
38 help
39 Say Y if you want to use an ADU device from Ontrak Control
40 Systems.
41
42 To compile this driver as a module, choose M here. The module
43 will be called adutux.
44
45config USB_SEVSEG
46 tristate "USB 7-Segment LED Display"
47 depends on USB
48 help
49 Say Y here if you have a USB 7-Segment Display by Delcom
50
51 To compile this driver as a module, choose M here: the
52 module will be called usbsevseg.
53
54config USB_RIO500
55 tristate "USB Diamond Rio500 support"
56 depends on USB
57 help
58 Say Y here if you want to connect a USB Rio500 mp3 player to your
59 computer's USB port. Please read <file:Documentation/usb/rio.txt>
60 for more information.
61
62 To compile this driver as a module, choose M here: the
63 module will be called rio500.
64
65config USB_LEGOTOWER
66 tristate "USB Lego Infrared Tower support"
67 depends on USB
68 help
69 Say Y here if you want to connect a USB Lego Infrared Tower to your
70 computer's USB port.
71
72 This code is also available as a module ( = code which can be
73 inserted in and removed from the running kernel whenever you want).
74 The module will be called legousbtower. If you want to compile it as
75 a module, say M here and read
76 <file:Documentation/kbuild/modules.txt>.
77
78config USB_LCD
79 tristate "USB LCD driver support"
80 depends on USB
81 help
82 Say Y here if you want to connect an USBLCD to your computer's
83 USB port. The USBLCD is a small USB interface board for
84 alphanumeric LCD modules. See <http://www.usblcd.de/> for more
85 information.
86
87 To compile this driver as a module, choose M here: the
88 module will be called usblcd.
89
90config USB_LED
91 tristate "USB LED driver support"
92 depends on USB
93 help
94 Say Y here if you want to connect an USBLED device to your
95 computer's USB port.
96
97 To compile this driver as a module, choose M here: the
98 module will be called usbled.
99
100config USB_CYPRESS_CY7C63
101 tristate "Cypress CY7C63xxx USB driver support"
102 depends on USB
103 help
104 Say Y here if you want to connect a Cypress CY7C63xxx
105 micro controller to your computer's USB port. Currently this
106 driver supports the pre-programmed devices (incl. firmware)
107 by AK Modul-Bus Computer GmbH.
108
109 Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
110
111 To compile this driver as a module, choose M here: the
112 module will be called cypress_cy7c63.
113
114config USB_CYTHERM
115 tristate "Cypress USB thermometer driver support"
116 depends on USB
117 help
118 Say Y here if you want to connect a Cypress USB thermometer
119 device to your computer's USB port. This device is also known
120 as the Cypress USB Starter kit or demo board. The Elektor
121 magazine published a modified version of this device in issue
122 #291.
123
124 To compile this driver as a module, choose M here: the
125 module will be called cytherm.
126
127config USB_IDMOUSE
128 tristate "Siemens ID USB Mouse Fingerprint sensor support"
129 depends on USB
130 help
131 Say Y here if you want to use the fingerprint sensor on
132 the Siemens ID Mouse. There is also a Siemens ID Mouse
133 _Professional_, which has not been tested with this driver,
134 but uses the same sensor and may therefore work.
135
136 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
137 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
138
139 See also <http://www.fs.tum.de/~echtler/idmouse/>.
140
141config USB_FTDI_ELAN
142 tristate "Elan PCMCIA CardBus Adapter USB Client"
143 depends on USB
144 default M
145 help
146 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
147 Currently only the U132 adapter is available.
148
149 The U132 is specifically designed for CardBus PC cards that contain
150 an OHCI host controller. Typical PC cards are the Orange Mobile 3G
151 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
152 with PC cards that do not contain an OHCI controller. To use a U132
153 adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
154 module which is a USB host controller driver that talks to the OHCI
155 controller within CardBus card that are inserted in the U132 adapter.
156
157 This driver has been tested with a CardBus OHCI USB adapter, and
158 worked with a USB PEN Drive inserted into the first USB port of
159 the PCCARD. A rather pointless thing to do, but useful for testing.
160
161 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
162
163 It is safe to say M here.
164
165config USB_APPLEDISPLAY
166 tristate "Apple Cinema Display support"
167 depends on USB
168 select BACKLIGHT_LCD_SUPPORT
169 select BACKLIGHT_CLASS_DEVICE
170 help
171 Say Y here if you want to control the backlight of Apple Cinema
172 Displays over USB. This driver provides a sysfs interface.
173
174source "drivers/usb/misc/sisusbvga/Kconfig"
175
176config USB_LD
177 tristate "USB LD driver"
178 depends on USB
179 help
180 This driver is for generic USB devices that use interrupt transfers,
181 like LD Didactic's USB devices.
182
183 To compile this driver as a module, choose M here: the
184 module will be called ldusb.
185
186config USB_TRANCEVIBRATOR
187 tristate "PlayStation 2 Trance Vibrator driver support"
188 depends on USB
189 help
190 Say Y here if you want to connect a PlayStation 2 Trance Vibrator
191 device to your computer's USB port.
192
193 To compile this driver as a module, choose M here: the
194 module will be called trancevibrator.
195
196config USB_IOWARRIOR
197 tristate "IO Warrior driver support"
198 depends on USB
199 help
200 Say Y here if you want to support the IO Warrior devices from Code
201 Mercenaries. This includes support for the following devices:
202 IO Warrior 40
203 IO Warrior 24
204 IO Warrior 56
205 IO Warrior 24 Power Vampire
206
207 To compile this driver as a module, choose M here: the
208 module will be called iowarrior.
209
210config USB_TEST
211 tristate "USB testing driver"
212 depends on USB
213 help
214 This driver is for testing host controller software. It is used
215 with specialized device firmware for regression and stress testing,
216 to help prevent problems from cropping up with "real" drivers.
217
218 See <http://www.linux-usb.org/usbtest/> for more information,
219 including sample test device firmware and "how to use it".
220
221config USB_ISIGHTFW
222 tristate "iSight firmware loading support"
223 depends on USB
224 select FW_LOADER
225 help
226 This driver loads firmware for USB Apple iSight cameras, allowing
227 them to be driven by the USB video class driver available at
228 http://linux-uvc.berlios.de
229
230 The firmware for this driver must be extracted from the MacOS
231 driver beforehand. Tools for doing so are available at
232 http://bersace03.free.fr
233
234config USB_YUREX
235 tristate "USB YUREX driver support"
236 depends on USB
237 help
238 Say Y here if you want to connect a YUREX to your computer's
239 USB port. The YUREX is a leg-shakes sensor. See
240 <http://bbu.kayac.com/en/> for further information.
241 This driver supports read/write of leg-shakes counter and
242 fasync for the counter update via a device file /dev/yurex*.
243
244 To compile this driver as a module, choose M here: the
245 module will be called yurex.
246
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Miscellaneous driver configuration
4#
5comment "USB Miscellaneous drivers"
6
7config USB_EMI62
8 tristate "EMI 6|2m USB Audio interface support"
9 help
10 This driver loads firmware to Emagic EMI 6|2m low latency USB
11 Audio and Midi interface.
12
13 After firmware load the device is handled with standard linux
14 USB Audio driver.
15
16 This code is also available as a module ( = code which can be
17 inserted in and removed from the running kernel whenever you want).
18 The module will be called audio. If you want to compile it as a
19 module, say M here and read <file:Documentation/kbuild/modules.rst>.
20
21config USB_EMI26
22 tristate "EMI 2|6 USB Audio interface support"
23 help
24 This driver loads firmware to Emagic EMI 2|6 low latency USB
25 Audio interface.
26
27 After firmware load the device is handled with standard linux
28 USB Audio driver.
29
30 To compile this driver as a module, choose M here: the
31 module will be called emi26.
32
33config USB_ADUTUX
34 tristate "ADU devices from Ontrak Control Systems"
35 help
36 Say Y if you want to use an ADU device from Ontrak Control
37 Systems.
38
39 To compile this driver as a module, choose M here. The module
40 will be called adutux.
41
42config USB_SEVSEG
43 tristate "USB 7-Segment LED Display"
44 help
45 Say Y here if you have a USB 7-Segment Display by Delcom
46
47 To compile this driver as a module, choose M here: the
48 module will be called usbsevseg.
49
50config USB_LEGOTOWER
51 tristate "USB Lego Infrared Tower support"
52 help
53 Say Y here if you want to connect a USB Lego Infrared Tower to your
54 computer's USB port.
55
56 This code is also available as a module ( = code which can be
57 inserted in and removed from the running kernel whenever you want).
58 The module will be called legousbtower. If you want to compile it as
59 a module, say M here and read
60 <file:Documentation/kbuild/modules.rst>.
61
62config USB_LCD
63 tristate "USB LCD driver support"
64 help
65 Say Y here if you want to connect an USBLCD to your computer's
66 USB port. The USBLCD is a small USB interface board for
67 alphanumeric LCD modules. See <http://www.usblcd.de/> for more
68 information.
69
70 To compile this driver as a module, choose M here: the
71 module will be called usblcd.
72
73config USB_CYPRESS_CY7C63
74 tristate "Cypress CY7C63xxx USB driver support"
75 help
76 Say Y here if you want to connect a Cypress CY7C63xxx
77 micro controller to your computer's USB port. Currently this
78 driver supports the pre-programmed devices (incl. firmware)
79 by AK Modul-Bus Computer GmbH.
80
81 Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html
82
83 To compile this driver as a module, choose M here: the
84 module will be called cypress_cy7c63.
85
86config USB_CYTHERM
87 tristate "Cypress USB thermometer driver support"
88 help
89 Say Y here if you want to connect a Cypress USB thermometer
90 device to your computer's USB port. This device is also known
91 as the Cypress USB Starter kit or demo board. The Elektor
92 magazine published a modified version of this device in issue
93 #291.
94
95 To compile this driver as a module, choose M here: the
96 module will be called cytherm.
97
98config USB_IDMOUSE
99 tristate "Siemens ID USB Mouse Fingerprint sensor support"
100 help
101 Say Y here if you want to use the fingerprint sensor on
102 the Siemens ID Mouse. There is also a Siemens ID Mouse
103 _Professional_, which has not been tested with this driver,
104 but uses the same sensor and may therefore work.
105
106 This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
107 which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
108
109 See also <https://www.fs.tum.de/~echtler/idmouse/>.
110
111config USB_FTDI_ELAN
112 tristate "Elan PCMCIA CardBus Adapter USB Client"
113 help
114 ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
115 Currently only the U132 adapter is available.
116
117 The U132 is specifically designed for CardBus PC cards that contain
118 an OHCI host controller. Typical PC cards are the Orange Mobile 3G
119 Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
120 with PC cards that do not contain an OHCI controller. To use a U132
121 adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
122 module which is a USB host controller driver that talks to the OHCI
123 controller within CardBus card that are inserted in the U132 adapter.
124
125 This driver has been tested with a CardBus OHCI USB adapter, and
126 worked with a USB PEN Drive inserted into the first USB port of
127 the PCCARD. A rather pointless thing to do, but useful for testing.
128
129 See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
130
131 It is safe to say M here.
132
133config USB_APPLEDISPLAY
134 tristate "Apple Cinema Display support"
135 select BACKLIGHT_CLASS_DEVICE
136 help
137 Say Y here if you want to control the backlight of Apple Cinema
138 Displays over USB. This driver provides a sysfs interface.
139
140config APPLE_MFI_FASTCHARGE
141 tristate "Fast charge control for iOS devices"
142 select POWER_SUPPLY
143 help
144 Say Y here if you want to control whether iOS devices will
145 fast charge from the USB interface, as implemented in "MFi"
146 chargers.
147
148 It is safe to say M here.
149
150source "drivers/usb/misc/sisusbvga/Kconfig"
151
152config USB_LD
153 tristate "USB LD driver"
154 help
155 This driver is for generic USB devices that use interrupt transfers,
156 like LD Didactic's USB devices.
157
158 To compile this driver as a module, choose M here: the
159 module will be called ldusb.
160
161config USB_TRANCEVIBRATOR
162 tristate "PlayStation 2 Trance Vibrator driver support"
163 help
164 Say Y here if you want to connect a PlayStation 2 Trance Vibrator
165 device to your computer's USB port.
166
167 To compile this driver as a module, choose M here: the
168 module will be called trancevibrator.
169
170config USB_IOWARRIOR
171 tristate "IO Warrior driver support"
172 help
173 Say Y here if you want to support the IO Warrior devices from Code
174 Mercenaries. This includes support for the following devices:
175 IO Warrior 40
176 IO Warrior 24
177 IO Warrior 56
178 IO Warrior 24 Power Vampire
179
180 To compile this driver as a module, choose M here: the
181 module will be called iowarrior.
182
183config USB_TEST
184 tristate "USB testing driver"
185 help
186 This driver is for testing host controller software. It is used
187 with specialized device firmware for regression and stress testing,
188 to help prevent problems from cropping up with "real" drivers.
189
190 See <http://www.linux-usb.org/usbtest/> for more information,
191 including sample test device firmware and "how to use it".
192
193config USB_EHSET_TEST_FIXTURE
194 tristate "USB EHSET Test Fixture driver"
195 help
196 Say Y here if you want to support the special test fixture device
197 used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
198
199 When the test fixture is connected, it can enumerate as one of several
200 VID/PID pairs. This driver then initiates a corresponding test mode on
201 the downstream port to which the test fixture is attached.
202
203 See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
204 information.
205
206config USB_ISIGHTFW
207 tristate "iSight firmware loading support"
208 select FW_LOADER
209 help
210 This driver loads firmware for USB Apple iSight cameras, allowing
211 them to be driven by the USB video class driver available at
212 http://linux-uvc.berlios.de
213
214 The firmware for this driver must be extracted from the MacOS
215 driver beforehand. Tools for doing so are available at
216 http://bersace03.free.fr
217
218config USB_YUREX
219 tristate "USB YUREX driver support"
220 help
221 Say Y here if you want to connect a YUREX to your computer's
222 USB port. The YUREX is a leg-shakes sensor. See
223 <http://bbu.kayac.com/en/> for further information.
224 This driver supports read/write of leg-shakes counter and
225 fasync for the counter update via a device file /dev/yurex*.
226
227 To compile this driver as a module, choose M here: the
228 module will be called yurex.
229
230config USB_EZUSB_FX2
231 tristate "Functions for loading firmware on EZUSB chips"
232 help
233 Say Y here if you need EZUSB device support.
234 (Cypress FX/FX2/FX2LP microcontrollers)
235
236config USB_HUB_USB251XB
237 tristate "USB251XB Hub Controller Configuration Driver"
238 depends on I2C
239 help
240 This option enables support for configuration via SMBus of the
241 Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
242 parameters may be set in devicetree or platform data.
243 Say Y or M here if you need to configure such a device via SMBus.
244
245config USB_HSIC_USB3503
246 tristate "USB3503 HSIC to USB20 Driver"
247 depends on I2C
248 select REGMAP_I2C
249 help
250 This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
251
252config USB_HSIC_USB4604
253 tristate "USB4604 HSIC to USB20 Driver"
254 depends on I2C
255 help
256 This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
257
258config USB_LINK_LAYER_TEST
259 tristate "USB Link Layer Test driver"
260 help
261 This driver is for generating specific traffic for Super Speed Link
262 Layer Test Device. Say Y only when you want to conduct USB Super Speed
263 Link Layer Test for host controllers.
264
265config USB_CHAOSKEY
266 tristate "ChaosKey random number generator driver support"
267 depends on HW_RANDOM
268 help
269 Say Y here if you want to connect an AltusMetrum ChaosKey or
270 Araneus Alea I to your computer's USB port. These devices
271 are hardware random number generators which hook into the
272 kernel entropy pool to ensure a large supply of entropy for
273 /dev/random and /dev/urandom and also provides direct access
274 via /dev/chaoskeyX
275
276 To compile this driver as a module, choose M here: the
277 module will be called chaoskey.