Linux Audio

Check our new training course

Linux BSP development engineering services

Need help to port Linux and bootloaders to your hardware?
Loading...
Note: File does not exist in v5.9.
  1/* ehci-msm.c - HSUSB Host Controller Driver Implementation
  2 *
  3 * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
  4 *
  5 * Partly derived from ehci-fsl.c and ehci-hcd.c
  6 * Copyright (c) 2000-2004 by David Brownell
  7 * Copyright (c) 2005 MontaVista Software
  8 *
  9 * All source code in this file is licensed under the following license except
 10 * where indicated.
 11 *
 12 * This program is free software; you can redistribute it and/or modify it
 13 * under the terms of the GNU General Public License version 2 as published
 14 * by the Free Software Foundation.
 15 *
 16 * This program is distributed in the hope that it will be useful,
 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 19 *
 20 * See the GNU General Public License for more details.
 21 * You should have received a copy of the GNU General Public License
 22 * along with this program; if not, you can find it at http://www.fsf.org
 23 */
 24
 25#include <linux/platform_device.h>
 26#include <linux/clk.h>
 27#include <linux/err.h>
 28#include <linux/pm_runtime.h>
 29
 30#include <linux/usb/otg.h>
 31#include <linux/usb/msm_hsusb_hw.h>
 32
 33#define MSM_USB_BASE (hcd->regs)
 34
 35static struct otg_transceiver *otg;
 36
 37static int ehci_msm_reset(struct usb_hcd *hcd)
 38{
 39	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 40	int retval;
 41
 42	ehci->caps = USB_CAPLENGTH;
 43	hcd->has_tt = 1;
 44
 45	retval = ehci_setup(hcd);
 46	if (retval)
 47		return retval;
 48
 49	/* bursts of unspecified length. */
 50	writel(0, USB_AHBBURST);
 51	/* Use the AHB transactor */
 52	writel(0, USB_AHBMODE);
 53	/* Disable streaming mode and select host mode */
 54	writel(0x13, USB_USBMODE);
 55
 56	ehci_port_power(ehci, 1);
 57	return 0;
 58}
 59
 60static struct hc_driver msm_hc_driver = {
 61	.description		= hcd_name,
 62	.product_desc		= "Qualcomm On-Chip EHCI Host Controller",
 63	.hcd_priv_size		= sizeof(struct ehci_hcd),
 64
 65	/*
 66	 * generic hardware linkage
 67	 */
 68	.irq			= ehci_irq,
 69	.flags			= HCD_USB2 | HCD_MEMORY,
 70
 71	.reset			= ehci_msm_reset,
 72	.start			= ehci_run,
 73
 74	.stop			= ehci_stop,
 75	.shutdown		= ehci_shutdown,
 76
 77	/*
 78	 * managing i/o requests and associated device resources
 79	 */
 80	.urb_enqueue		= ehci_urb_enqueue,
 81	.urb_dequeue		= ehci_urb_dequeue,
 82	.endpoint_disable	= ehci_endpoint_disable,
 83	.endpoint_reset		= ehci_endpoint_reset,
 84	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 85
 86	/*
 87	 * scheduling support
 88	 */
 89	.get_frame_number	= ehci_get_frame,
 90
 91	/*
 92	 * root hub support
 93	 */
 94	.hub_status_data	= ehci_hub_status_data,
 95	.hub_control		= ehci_hub_control,
 96	.relinquish_port	= ehci_relinquish_port,
 97	.port_handed_over	= ehci_port_handed_over,
 98
 99	/*
100	 * PM support
101	 */
102	.bus_suspend		= ehci_bus_suspend,
103	.bus_resume		= ehci_bus_resume,
104};
105
106static int ehci_msm_probe(struct platform_device *pdev)
107{
108	struct usb_hcd *hcd;
109	struct resource *res;
110	int ret;
111
112	dev_dbg(&pdev->dev, "ehci_msm proble\n");
113
114	hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
115	if (!hcd) {
116		dev_err(&pdev->dev, "Unable to create HCD\n");
117		return  -ENOMEM;
118	}
119
120	hcd->irq = platform_get_irq(pdev, 0);
121	if (hcd->irq < 0) {
122		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
123		ret = hcd->irq;
124		goto put_hcd;
125	}
126
127	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
128	if (!res) {
129		dev_err(&pdev->dev, "Unable to get memory resource\n");
130		ret = -ENODEV;
131		goto put_hcd;
132	}
133
134	hcd->rsrc_start = res->start;
135	hcd->rsrc_len = resource_size(res);
136	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
137	if (!hcd->regs) {
138		dev_err(&pdev->dev, "ioremap failed\n");
139		ret = -ENOMEM;
140		goto put_hcd;
141	}
142
143	/*
144	 * OTG driver takes care of PHY initialization, clock management,
145	 * powering up VBUS, mapping of registers address space and power
146	 * management.
147	 */
148	otg = otg_get_transceiver();
149	if (!otg) {
150		dev_err(&pdev->dev, "unable to find transceiver\n");
151		ret = -ENODEV;
152		goto unmap;
153	}
154
155	ret = otg_set_host(otg, &hcd->self);
156	if (ret < 0) {
157		dev_err(&pdev->dev, "unable to register with transceiver\n");
158		goto put_transceiver;
159	}
160
161	device_init_wakeup(&pdev->dev, 1);
162	/*
163	 * OTG device parent of HCD takes care of putting
164	 * hardware into low power mode.
165	 */
166	pm_runtime_no_callbacks(&pdev->dev);
167	pm_runtime_enable(&pdev->dev);
168
169	return 0;
170
171put_transceiver:
172	otg_put_transceiver(otg);
173unmap:
174	iounmap(hcd->regs);
175put_hcd:
176	usb_put_hcd(hcd);
177
178	return ret;
179}
180
181static int __devexit ehci_msm_remove(struct platform_device *pdev)
182{
183	struct usb_hcd *hcd = platform_get_drvdata(pdev);
184
185	device_init_wakeup(&pdev->dev, 0);
186	pm_runtime_disable(&pdev->dev);
187	pm_runtime_set_suspended(&pdev->dev);
188
189	otg_set_host(otg, NULL);
190	otg_put_transceiver(otg);
191
192	usb_put_hcd(hcd);
193
194	return 0;
195}
196
197#ifdef CONFIG_PM
198static int ehci_msm_pm_suspend(struct device *dev)
199{
200	struct usb_hcd *hcd = dev_get_drvdata(dev);
201	bool wakeup = device_may_wakeup(dev);
202
203	dev_dbg(dev, "ehci-msm PM suspend\n");
204
205	/*
206	 * EHCI helper function has also the same check before manipulating
207	 * port wakeup flags.  We do check here the same condition before
208	 * calling the same helper function to avoid bringing hardware
209	 * from Low power mode when there is no need for adjusting port
210	 * wakeup flags.
211	 */
212	if (hcd->self.root_hub->do_remote_wakeup && !wakeup) {
213		pm_runtime_resume(dev);
214		ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
215				wakeup);
216	}
217
218	return 0;
219}
220
221static int ehci_msm_pm_resume(struct device *dev)
222{
223	struct usb_hcd *hcd = dev_get_drvdata(dev);
224
225	dev_dbg(dev, "ehci-msm PM resume\n");
226	ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
227
228	return 0;
229}
230#else
231#define ehci_msm_pm_suspend	NULL
232#define ehci_msm_pm_resume	NULL
233#endif
234
235static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
236	.suspend         = ehci_msm_pm_suspend,
237	.resume          = ehci_msm_pm_resume,
238};
239
240static struct platform_driver ehci_msm_driver = {
241	.probe	= ehci_msm_probe,
242	.remove	= __devexit_p(ehci_msm_remove),
243	.driver = {
244		   .name = "msm_hsusb_host",
245		   .pm = &ehci_msm_dev_pm_ops,
246	},
247};