Loading...
1/* aha152x.c -- Adaptec AHA-152x driver
2 * Author: Jürgen E. Fischer, fischer@norbit.de
3 * Copyright 1993-2004 Jürgen E. Fischer
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2, or (at your option) any
8 * later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
14 *
15 *
16 * $Id: aha152x.c,v 2.7 2004/01/24 11:42:59 fischer Exp $
17 *
18 * $Log: aha152x.c,v $
19 * Revision 2.7 2004/01/24 11:42:59 fischer
20 * - gather code that is not used by PCMCIA at the end
21 * - move request_region for !PCMCIA case to detection
22 * - migration to new scsi host api (remove legacy code)
23 * - free host scribble before scsi_done
24 * - fix error handling
25 * - one isapnp device added to id_table
26 *
27 * Revision 2.6 2003/10/30 20:52:47 fischer
28 * - interfaces changes for kernel 2.6
29 * - aha152x_probe_one introduced for pcmcia stub
30 * - fixed pnpdev handling
31 * - instead of allocation a new one, reuse command for request sense after check condition and reset
32 * - fixes race in is_complete
33 *
34 * Revision 2.5 2002/04/14 11:24:53 fischer
35 * - isapnp support
36 * - abort fixed
37 * - 2.5 support
38 *
39 * Revision 2.4 2000/12/16 12:53:56 fischer
40 * - allow REQUEST SENSE to be queued
41 * - handle shared PCI interrupts
42 *
43 * Revision 2.3 2000/11/04 16:40:26 fischer
44 * - handle data overruns
45 * - extend timeout for data phases
46 *
47 * Revision 2.2 2000/08/08 19:54:53 fischer
48 * - minor changes
49 *
50 * Revision 2.1 2000/05/17 16:23:17 fischer
51 * - signature update
52 * - fix for data out w/o scatter gather
53 *
54 * Revision 2.0 1999/12/25 15:07:32 fischer
55 * - interrupt routine completly reworked
56 * - basic support for new eh code
57 *
58 * Revision 1.21 1999/11/10 23:46:36 fischer
59 * - default to synchronous operation
60 * - synchronous negotiation fixed
61 * - added timeout to loops
62 * - debugging output can be controlled through procfs
63 *
64 * Revision 1.20 1999/11/07 18:37:31 fischer
65 * - synchronous operation works
66 * - resid support for sg driver
67 *
68 * Revision 1.19 1999/11/02 22:39:59 fischer
69 * - moved leading comments to README.aha152x
70 * - new additional module parameters
71 * - updates for 2.3
72 * - support for the Tripace TC1550 controller
73 * - interrupt handling changed
74 *
75 * Revision 1.18 1996/09/07 20:10:40 fischer
76 * - fixed can_queue handling (multiple outstanding commands working again)
77 *
78 * Revision 1.17 1996/08/17 16:05:14 fischer
79 * - biosparam improved
80 * - interrupt verification
81 * - updated documentation
82 * - cleanups
83 *
84 * Revision 1.16 1996/06/09 00:04:56 root
85 * - added configuration symbols for insmod (aha152x/aha152x1)
86 *
87 * Revision 1.15 1996/04/30 14:52:06 fischer
88 * - proc info fixed
89 * - support for extended translation for >1GB disks
90 *
91 * Revision 1.14 1996/01/17 15:11:20 fischer
92 * - fixed lockup in MESSAGE IN phase after reconnection
93 *
94 * Revision 1.13 1996/01/09 02:15:53 fischer
95 * - some cleanups
96 * - moved request_irq behind controller initialization
97 * (to avoid spurious interrupts)
98 *
99 * Revision 1.12 1995/12/16 12:26:07 fischer
100 * - barrier()s added
101 * - configurable RESET delay added
102 *
103 * Revision 1.11 1995/12/06 21:18:35 fischer
104 * - some minor updates
105 *
106 * Revision 1.10 1995/07/22 19:18:45 fischer
107 * - support for 2 controllers
108 * - started synchronous data transfers (not working yet)
109 *
110 * Revision 1.9 1995/03/18 09:20:24 root
111 * - patches for PCMCIA and modules
112 *
113 * Revision 1.8 1995/01/21 22:07:19 root
114 * - snarf_region => request_region
115 * - aha152x_intr interface change
116 *
117 * Revision 1.7 1995/01/02 23:19:36 root
118 * - updated COMMAND_SIZE to cmd_len
119 * - changed sti() to restore_flags()
120 * - fixed some #ifdef which generated warnings
121 *
122 * Revision 1.6 1994/11/24 20:35:27 root
123 * - problem with odd number of bytes in fifo fixed
124 *
125 * Revision 1.5 1994/10/30 14:39:56 root
126 * - abort code fixed
127 * - debugging improved
128 *
129 * Revision 1.4 1994/09/12 11:33:01 root
130 * - irqaction to request_irq
131 * - abortion updated
132 *
133 * Revision 1.3 1994/08/04 13:53:05 root
134 * - updates for mid-level-driver changes
135 * - accept unexpected BUSFREE phase as error condition
136 * - parity check now configurable
137 *
138 * Revision 1.2 1994/07/03 12:56:36 root
139 * - cleaned up debugging code
140 * - more tweaking on reset delays
141 * - updated abort/reset code (pretty untested...)
142 *
143 * Revision 1.1 1994/05/28 21:18:49 root
144 * - update for mid-level interface change (abort-reset)
145 * - delays after resets adjusted for some slow devices
146 *
147 * Revision 1.0 1994/03/25 12:52:00 root
148 * - Fixed "more data than expected" problem
149 * - added new BIOS signatures
150 *
151 * Revision 0.102 1994/01/31 20:44:12 root
152 * - minor changes in insw/outsw handling
153 *
154 * Revision 0.101 1993/12/13 01:16:27 root
155 * - fixed STATUS phase (non-GOOD stati were dropped sometimes;
156 * fixes problems with CD-ROM sector size detection & media change)
157 *
158 * Revision 0.100 1993/12/10 16:58:47 root
159 * - fix for unsuccessful selections in case of non-continuous id assignments
160 * on the scsi bus.
161 *
162 * Revision 0.99 1993/10/24 16:19:59 root
163 * - fixed DATA IN (rare read errors gone)
164 *
165 * Revision 0.98 1993/10/17 12:54:44 root
166 * - fixed some recent fixes (shame on me)
167 * - moved initialization of scratch area to aha152x_queue
168 *
169 * Revision 0.97 1993/10/09 18:53:53 root
170 * - DATA IN fixed. Rarely left data in the fifo.
171 *
172 * Revision 0.96 1993/10/03 00:53:59 root
173 * - minor changes on DATA IN
174 *
175 * Revision 0.95 1993/09/24 10:36:01 root
176 * - change handling of MSGI after reselection
177 * - fixed sti/cli
178 * - minor changes
179 *
180 * Revision 0.94 1993/09/18 14:08:22 root
181 * - fixed bug in multiple outstanding command code
182 * - changed detection
183 * - support for kernel command line configuration
184 * - reset corrected
185 * - changed message handling
186 *
187 * Revision 0.93 1993/09/15 20:41:19 root
188 * - fixed bugs with multiple outstanding commands
189 *
190 * Revision 0.92 1993/09/13 02:46:33 root
191 * - multiple outstanding commands work (no problems with IBM drive)
192 *
193 * Revision 0.91 1993/09/12 20:51:46 root
194 * added multiple outstanding commands
195 * (some problem with this $%&? IBM device remain)
196 *
197 * Revision 0.9 1993/09/12 11:11:22 root
198 * - corrected auto-configuration
199 * - changed the auto-configuration (added some '#define's)
200 * - added support for dis-/reconnection
201 *
202 * Revision 0.8 1993/09/06 23:09:39 root
203 * - added support for the drive activity light
204 * - minor changes
205 *
206 * Revision 0.7 1993/09/05 14:30:15 root
207 * - improved phase detection
208 * - now using the new snarf_region code of 0.99pl13
209 *
210 * Revision 0.6 1993/09/02 11:01:38 root
211 * first public release; added some signatures and biosparam()
212 *
213 * Revision 0.5 1993/08/30 10:23:30 root
214 * fixed timing problems with my IBM drive
215 *
216 * Revision 0.4 1993/08/29 14:06:52 root
217 * fixed some problems with timeouts due incomplete commands
218 *
219 * Revision 0.3 1993/08/28 15:55:03 root
220 * writing data works too. mounted and worked on a dos partition
221 *
222 * Revision 0.2 1993/08/27 22:42:07 root
223 * reading data works. Mounted a msdos partition.
224 *
225 * Revision 0.1 1993/08/25 13:38:30 root
226 * first "damn thing doesn't work" version
227 *
228 * Revision 0.0 1993/08/14 19:54:25 root
229 * empty function bodies; detect() works.
230 *
231 *
232 **************************************************************************
233
234 see Documentation/scsi/aha152x.txt for configuration details
235
236 **************************************************************************/
237
238#include <linux/module.h>
239#include <asm/irq.h>
240#include <linux/io.h>
241#include <linux/blkdev.h>
242#include <asm/system.h>
243#include <linux/completion.h>
244#include <linux/errno.h>
245#include <linux/string.h>
246#include <linux/wait.h>
247#include <linux/ioport.h>
248#include <linux/delay.h>
249#include <linux/proc_fs.h>
250#include <linux/interrupt.h>
251#include <linux/init.h>
252#include <linux/kernel.h>
253#include <linux/isapnp.h>
254#include <linux/spinlock.h>
255#include <linux/workqueue.h>
256#include <linux/list.h>
257#include <linux/slab.h>
258#include <scsi/scsicam.h>
259
260#include "scsi.h"
261#include <scsi/scsi_dbg.h>
262#include <scsi/scsi_host.h>
263#include <scsi/scsi_transport_spi.h>
264#include <scsi/scsi_eh.h>
265#include "aha152x.h"
266
267static LIST_HEAD(aha152x_host_list);
268
269
270/* DEFINES */
271
272/* For PCMCIA cards, always use AUTOCONF */
273#if defined(PCMCIA) || defined(MODULE)
274#if !defined(AUTOCONF)
275#define AUTOCONF
276#endif
277#endif
278
279#if !defined(AUTOCONF) && !defined(SETUP0)
280#error define AUTOCONF or SETUP0
281#endif
282
283#if defined(AHA152X_DEBUG)
284#define DEBUG_DEFAULT debug_eh
285
286#define DPRINTK(when,msgs...) \
287 do { if(HOSTDATA(shpnt)->debug & (when)) printk(msgs); } while(0)
288
289#define DO_LOCK(flags) \
290 do { \
291 if(spin_is_locked(&QLOCK)) { \
292 DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
293 } \
294 DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
295 spin_lock_irqsave(&QLOCK,flags); \
296 DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
297 QLOCKER=__func__; \
298 QLOCKERL=__LINE__; \
299 } while(0)
300
301#define DO_UNLOCK(flags) \
302 do { \
303 DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
304 spin_unlock_irqrestore(&QLOCK,flags); \
305 DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
306 QLOCKER="(not locked)"; \
307 QLOCKERL=0; \
308 } while(0)
309
310#else
311#define DPRINTK(when,msgs...)
312#define DO_LOCK(flags) spin_lock_irqsave(&QLOCK,flags)
313#define DO_UNLOCK(flags) spin_unlock_irqrestore(&QLOCK,flags)
314#endif
315
316#define LEAD "(scsi%d:%d:%d) "
317#define WARN_LEAD KERN_WARNING LEAD
318#define INFO_LEAD KERN_INFO LEAD
319#define NOTE_LEAD KERN_NOTICE LEAD
320#define ERR_LEAD KERN_ERR LEAD
321#define DEBUG_LEAD KERN_DEBUG LEAD
322#define CMDINFO(cmd) \
323 (cmd) ? ((cmd)->device->host->host_no) : -1, \
324 (cmd) ? ((cmd)->device->id & 0x0f) : -1, \
325 (cmd) ? ((cmd)->device->lun & 0x07) : -1
326
327static inline void
328CMD_INC_RESID(struct scsi_cmnd *cmd, int inc)
329{
330 scsi_set_resid(cmd, scsi_get_resid(cmd) + inc);
331}
332
333#define DELAY_DEFAULT 1000
334
335#if defined(PCMCIA)
336#define IRQ_MIN 0
337#define IRQ_MAX 16
338#else
339#define IRQ_MIN 9
340#if defined(__PPC)
341#define IRQ_MAX (nr_irqs-1)
342#else
343#define IRQ_MAX 12
344#endif
345#endif
346
347enum {
348 not_issued = 0x0001, /* command not yet issued */
349 selecting = 0x0002, /* target is beeing selected */
350 identified = 0x0004, /* IDENTIFY was sent */
351 disconnected = 0x0008, /* target disconnected */
352 completed = 0x0010, /* target sent COMMAND COMPLETE */
353 aborted = 0x0020, /* ABORT was sent */
354 resetted = 0x0040, /* BUS DEVICE RESET was sent */
355 spiordy = 0x0080, /* waiting for SPIORDY to raise */
356 syncneg = 0x0100, /* synchronous negotiation in progress */
357 aborting = 0x0200, /* ABORT is pending */
358 resetting = 0x0400, /* BUS DEVICE RESET is pending */
359 check_condition = 0x0800, /* requesting sense after CHECK CONDITION */
360};
361
362MODULE_AUTHOR("Jürgen Fischer");
363MODULE_DESCRIPTION(AHA152X_REVID);
364MODULE_LICENSE("GPL");
365
366#if !defined(PCMCIA)
367#if defined(MODULE)
368static int io[] = {0, 0};
369module_param_array(io, int, NULL, 0);
370MODULE_PARM_DESC(io,"base io address of controller");
371
372static int irq[] = {0, 0};
373module_param_array(irq, int, NULL, 0);
374MODULE_PARM_DESC(irq,"interrupt for controller");
375
376static int scsiid[] = {7, 7};
377module_param_array(scsiid, int, NULL, 0);
378MODULE_PARM_DESC(scsiid,"scsi id of controller");
379
380static int reconnect[] = {1, 1};
381module_param_array(reconnect, int, NULL, 0);
382MODULE_PARM_DESC(reconnect,"allow targets to disconnect");
383
384static int parity[] = {1, 1};
385module_param_array(parity, int, NULL, 0);
386MODULE_PARM_DESC(parity,"use scsi parity");
387
388static int sync[] = {1, 1};
389module_param_array(sync, int, NULL, 0);
390MODULE_PARM_DESC(sync,"use synchronous transfers");
391
392static int delay[] = {DELAY_DEFAULT, DELAY_DEFAULT};
393module_param_array(delay, int, NULL, 0);
394MODULE_PARM_DESC(delay,"scsi reset delay");
395
396static int exttrans[] = {0, 0};
397module_param_array(exttrans, int, NULL, 0);
398MODULE_PARM_DESC(exttrans,"use extended translation");
399
400#if !defined(AHA152X_DEBUG)
401static int aha152x[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
402module_param_array(aha152x, int, NULL, 0);
403MODULE_PARM_DESC(aha152x, "parameters for first controller");
404
405static int aha152x1[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
406module_param_array(aha152x1, int, NULL, 0);
407MODULE_PARM_DESC(aha152x1, "parameters for second controller");
408#else
409static int debug[] = {DEBUG_DEFAULT, DEBUG_DEFAULT};
410module_param_array(debug, int, NULL, 0);
411MODULE_PARM_DESC(debug, "flags for driver debugging");
412
413static int aha152x[] = {0, 11, 7, 1, 1, 1, DELAY_DEFAULT, 0, DEBUG_DEFAULT};
414module_param_array(aha152x, int, NULL, 0);
415MODULE_PARM_DESC(aha152x, "parameters for first controller");
416
417static int aha152x1[] = {0, 11, 7, 1, 1, 1, DELAY_DEFAULT, 0, DEBUG_DEFAULT};
418module_param_array(aha152x1, int, NULL, 0);
419MODULE_PARM_DESC(aha152x1, "parameters for second controller");
420#endif /* !defined(AHA152X_DEBUG) */
421#endif /* MODULE */
422
423#ifdef __ISAPNP__
424static struct isapnp_device_id id_table[] __devinitdata = {
425 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1502), 0 },
426 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1505), 0 },
427 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1510), 0 },
428 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1515), 0 },
429 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1520), 0 },
430 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x2015), 0 },
431 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1522), 0 },
432 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x2215), 0 },
433 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1530), 0 },
434 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x3015), 0 },
435 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1532), 0 },
436 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x3215), 0 },
437 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x6360), 0 },
438 { ISAPNP_DEVICE_SINGLE_END, }
439};
440MODULE_DEVICE_TABLE(isapnp, id_table);
441#endif /* ISAPNP */
442
443#endif /* !PCMCIA */
444
445static struct scsi_host_template aha152x_driver_template;
446
447/*
448 * internal states of the host
449 *
450 */
451enum aha152x_state {
452 idle=0,
453 unknown,
454 seldo,
455 seldi,
456 selto,
457 busfree,
458 msgo,
459 cmd,
460 msgi,
461 status,
462 datai,
463 datao,
464 parerr,
465 rsti,
466 maxstate
467};
468
469/*
470 * current state information of the host
471 *
472 */
473struct aha152x_hostdata {
474 Scsi_Cmnd *issue_SC;
475 /* pending commands to issue */
476
477 Scsi_Cmnd *current_SC;
478 /* current command on the bus */
479
480 Scsi_Cmnd *disconnected_SC;
481 /* commands that disconnected */
482
483 Scsi_Cmnd *done_SC;
484 /* command that was completed */
485
486 spinlock_t lock;
487 /* host lock */
488
489#if defined(AHA152X_DEBUG)
490 const char *locker;
491 /* which function has the lock */
492 int lockerl; /* where did it get it */
493
494 int debug; /* current debugging setting */
495#endif
496
497#if defined(AHA152X_STAT)
498 int total_commands;
499 int disconnections;
500 int busfree_without_any_action;
501 int busfree_without_old_command;
502 int busfree_without_new_command;
503 int busfree_without_done_command;
504 int busfree_with_check_condition;
505 int count[maxstate];
506 int count_trans[maxstate];
507 unsigned long time[maxstate];
508#endif
509
510 int commands; /* current number of commands */
511
512 int reconnect; /* disconnection allowed */
513 int parity; /* parity checking enabled */
514 int synchronous; /* synchronous transferes enabled */
515 int delay; /* reset out delay */
516 int ext_trans; /* extended translation enabled */
517
518 int swint; /* software-interrupt was fired during detect() */
519 int service; /* bh needs to be run */
520 int in_intr; /* bh is running */
521
522 /* current state,
523 previous state,
524 last state different from current state */
525 enum aha152x_state state, prevstate, laststate;
526
527 int target;
528 /* reconnecting target */
529
530 unsigned char syncrate[8];
531 /* current synchronous transfer agreements */
532
533 unsigned char syncneg[8];
534 /* 0: no negotiation;
535 * 1: negotiation in progress;
536 * 2: negotiation completed
537 */
538
539 int cmd_i;
540 /* number of sent bytes of current command */
541
542 int msgi_len;
543 /* number of received message bytes */
544 unsigned char msgi[256];
545 /* received message bytes */
546
547 int msgo_i, msgo_len;
548 /* number of sent bytes and length of current messages */
549 unsigned char msgo[256];
550 /* pending messages */
551
552 int data_len;
553 /* number of sent/received bytes in dataphase */
554
555 unsigned long io_port0;
556 unsigned long io_port1;
557
558#ifdef __ISAPNP__
559 struct pnp_dev *pnpdev;
560#endif
561 struct list_head host_list;
562};
563
564
565/*
566 * host specific command extension
567 *
568 */
569struct aha152x_scdata {
570 Scsi_Cmnd *next; /* next sc in queue */
571 struct completion *done;/* semaphore to block on */
572 struct scsi_eh_save ses;
573};
574
575/* access macros for hostdata */
576
577#define HOSTDATA(shpnt) ((struct aha152x_hostdata *) &shpnt->hostdata)
578
579#define HOSTNO ((shpnt)->host_no)
580
581#define CURRENT_SC (HOSTDATA(shpnt)->current_SC)
582#define DONE_SC (HOSTDATA(shpnt)->done_SC)
583#define ISSUE_SC (HOSTDATA(shpnt)->issue_SC)
584#define DISCONNECTED_SC (HOSTDATA(shpnt)->disconnected_SC)
585#define QLOCK (HOSTDATA(shpnt)->lock)
586#define QLOCKER (HOSTDATA(shpnt)->locker)
587#define QLOCKERL (HOSTDATA(shpnt)->lockerl)
588
589#define STATE (HOSTDATA(shpnt)->state)
590#define PREVSTATE (HOSTDATA(shpnt)->prevstate)
591#define LASTSTATE (HOSTDATA(shpnt)->laststate)
592
593#define RECONN_TARGET (HOSTDATA(shpnt)->target)
594
595#define CMD_I (HOSTDATA(shpnt)->cmd_i)
596
597#define MSGO(i) (HOSTDATA(shpnt)->msgo[i])
598#define MSGO_I (HOSTDATA(shpnt)->msgo_i)
599#define MSGOLEN (HOSTDATA(shpnt)->msgo_len)
600#define ADDMSGO(x) (MSGOLEN<256 ? (void)(MSGO(MSGOLEN++)=x) : aha152x_error(shpnt,"MSGO overflow"))
601
602#define MSGI(i) (HOSTDATA(shpnt)->msgi[i])
603#define MSGILEN (HOSTDATA(shpnt)->msgi_len)
604#define ADDMSGI(x) (MSGILEN<256 ? (void)(MSGI(MSGILEN++)=x) : aha152x_error(shpnt,"MSGI overflow"))
605
606#define DATA_LEN (HOSTDATA(shpnt)->data_len)
607
608#define SYNCRATE (HOSTDATA(shpnt)->syncrate[CURRENT_SC->device->id])
609#define SYNCNEG (HOSTDATA(shpnt)->syncneg[CURRENT_SC->device->id])
610
611#define DELAY (HOSTDATA(shpnt)->delay)
612#define EXT_TRANS (HOSTDATA(shpnt)->ext_trans)
613#define TC1550 (HOSTDATA(shpnt)->tc1550)
614#define RECONNECT (HOSTDATA(shpnt)->reconnect)
615#define PARITY (HOSTDATA(shpnt)->parity)
616#define SYNCHRONOUS (HOSTDATA(shpnt)->synchronous)
617
618#define HOSTIOPORT0 (HOSTDATA(shpnt)->io_port0)
619#define HOSTIOPORT1 (HOSTDATA(shpnt)->io_port1)
620
621#define SCDATA(SCpnt) ((struct aha152x_scdata *) (SCpnt)->host_scribble)
622#define SCNEXT(SCpnt) SCDATA(SCpnt)->next
623#define SCSEM(SCpnt) SCDATA(SCpnt)->done
624
625#define SG_ADDRESS(buffer) ((char *) sg_virt((buffer)))
626
627/* state handling */
628static void seldi_run(struct Scsi_Host *shpnt);
629static void seldo_run(struct Scsi_Host *shpnt);
630static void selto_run(struct Scsi_Host *shpnt);
631static void busfree_run(struct Scsi_Host *shpnt);
632
633static void msgo_init(struct Scsi_Host *shpnt);
634static void msgo_run(struct Scsi_Host *shpnt);
635static void msgo_end(struct Scsi_Host *shpnt);
636
637static void cmd_init(struct Scsi_Host *shpnt);
638static void cmd_run(struct Scsi_Host *shpnt);
639static void cmd_end(struct Scsi_Host *shpnt);
640
641static void datai_init(struct Scsi_Host *shpnt);
642static void datai_run(struct Scsi_Host *shpnt);
643static void datai_end(struct Scsi_Host *shpnt);
644
645static void datao_init(struct Scsi_Host *shpnt);
646static void datao_run(struct Scsi_Host *shpnt);
647static void datao_end(struct Scsi_Host *shpnt);
648
649static void status_run(struct Scsi_Host *shpnt);
650
651static void msgi_run(struct Scsi_Host *shpnt);
652static void msgi_end(struct Scsi_Host *shpnt);
653
654static void parerr_run(struct Scsi_Host *shpnt);
655static void rsti_run(struct Scsi_Host *shpnt);
656
657static void is_complete(struct Scsi_Host *shpnt);
658
659/*
660 * driver states
661 *
662 */
663static struct {
664 char *name;
665 void (*init)(struct Scsi_Host *);
666 void (*run)(struct Scsi_Host *);
667 void (*end)(struct Scsi_Host *);
668 int spio;
669} states[] = {
670 { "idle", NULL, NULL, NULL, 0},
671 { "unknown", NULL, NULL, NULL, 0},
672 { "seldo", NULL, seldo_run, NULL, 0},
673 { "seldi", NULL, seldi_run, NULL, 0},
674 { "selto", NULL, selto_run, NULL, 0},
675 { "busfree", NULL, busfree_run, NULL, 0},
676 { "msgo", msgo_init, msgo_run, msgo_end, 1},
677 { "cmd", cmd_init, cmd_run, cmd_end, 1},
678 { "msgi", NULL, msgi_run, msgi_end, 1},
679 { "status", NULL, status_run, NULL, 1},
680 { "datai", datai_init, datai_run, datai_end, 0},
681 { "datao", datao_init, datao_run, datao_end, 0},
682 { "parerr", NULL, parerr_run, NULL, 0},
683 { "rsti", NULL, rsti_run, NULL, 0},
684};
685
686/* setup & interrupt */
687static irqreturn_t intr(int irq, void *dev_id);
688static void reset_ports(struct Scsi_Host *shpnt);
689static void aha152x_error(struct Scsi_Host *shpnt, char *msg);
690static void done(struct Scsi_Host *shpnt, int error);
691
692/* diagnostics */
693static void disp_ports(struct Scsi_Host *shpnt);
694static void show_command(Scsi_Cmnd * ptr);
695static void show_queues(struct Scsi_Host *shpnt);
696static void disp_enintr(struct Scsi_Host *shpnt);
697
698
699/*
700 * queue services:
701 *
702 */
703static inline void append_SC(Scsi_Cmnd **SC, Scsi_Cmnd *new_SC)
704{
705 Scsi_Cmnd *end;
706
707 SCNEXT(new_SC) = NULL;
708 if (!*SC)
709 *SC = new_SC;
710 else {
711 for (end = *SC; SCNEXT(end); end = SCNEXT(end))
712 ;
713 SCNEXT(end) = new_SC;
714 }
715}
716
717static inline Scsi_Cmnd *remove_first_SC(Scsi_Cmnd ** SC)
718{
719 Scsi_Cmnd *ptr;
720
721 ptr = *SC;
722 if (ptr) {
723 *SC = SCNEXT(*SC);
724 SCNEXT(ptr)=NULL;
725 }
726 return ptr;
727}
728
729static inline Scsi_Cmnd *remove_lun_SC(Scsi_Cmnd ** SC, int target, int lun)
730{
731 Scsi_Cmnd *ptr, *prev;
732
733 for (ptr = *SC, prev = NULL;
734 ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
735 prev = ptr, ptr = SCNEXT(ptr))
736 ;
737
738 if (ptr) {
739 if (prev)
740 SCNEXT(prev) = SCNEXT(ptr);
741 else
742 *SC = SCNEXT(ptr);
743
744 SCNEXT(ptr)=NULL;
745 }
746
747 return ptr;
748}
749
750static inline Scsi_Cmnd *remove_SC(Scsi_Cmnd **SC, Scsi_Cmnd *SCp)
751{
752 Scsi_Cmnd *ptr, *prev;
753
754 for (ptr = *SC, prev = NULL;
755 ptr && SCp!=ptr;
756 prev = ptr, ptr = SCNEXT(ptr))
757 ;
758
759 if (ptr) {
760 if (prev)
761 SCNEXT(prev) = SCNEXT(ptr);
762 else
763 *SC = SCNEXT(ptr);
764
765 SCNEXT(ptr)=NULL;
766 }
767
768 return ptr;
769}
770
771static irqreturn_t swintr(int irqno, void *dev_id)
772{
773 struct Scsi_Host *shpnt = dev_id;
774
775 HOSTDATA(shpnt)->swint++;
776
777 SETPORT(DMACNTRL0, INTEN);
778 return IRQ_HANDLED;
779}
780
781struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup)
782{
783 struct Scsi_Host *shpnt;
784
785 shpnt = scsi_host_alloc(&aha152x_driver_template, sizeof(struct aha152x_hostdata));
786 if (!shpnt) {
787 printk(KERN_ERR "aha152x: scsi_host_alloc failed\n");
788 return NULL;
789 }
790
791 memset(HOSTDATA(shpnt), 0, sizeof *HOSTDATA(shpnt));
792 INIT_LIST_HEAD(&HOSTDATA(shpnt)->host_list);
793
794 /* need to have host registered before triggering any interrupt */
795 list_add_tail(&HOSTDATA(shpnt)->host_list, &aha152x_host_list);
796
797 shpnt->io_port = setup->io_port;
798 shpnt->n_io_port = IO_RANGE;
799 shpnt->irq = setup->irq;
800
801 if (!setup->tc1550) {
802 HOSTIOPORT0 = setup->io_port;
803 HOSTIOPORT1 = setup->io_port;
804 } else {
805 HOSTIOPORT0 = setup->io_port+0x10;
806 HOSTIOPORT1 = setup->io_port-0x10;
807 }
808
809 spin_lock_init(&QLOCK);
810 RECONNECT = setup->reconnect;
811 SYNCHRONOUS = setup->synchronous;
812 PARITY = setup->parity;
813 DELAY = setup->delay;
814 EXT_TRANS = setup->ext_trans;
815
816#if defined(AHA152X_DEBUG)
817 HOSTDATA(shpnt)->debug = setup->debug;
818#endif
819
820 SETPORT(SCSIID, setup->scsiid << 4);
821 shpnt->this_id = setup->scsiid;
822
823 if (setup->reconnect)
824 shpnt->can_queue = AHA152X_MAXQUEUE;
825
826 /* RESET OUT */
827 printk("aha152x: resetting bus...\n");
828 SETPORT(SCSISEQ, SCSIRSTO);
829 mdelay(256);
830 SETPORT(SCSISEQ, 0);
831 mdelay(DELAY);
832
833 reset_ports(shpnt);
834
835 printk(KERN_INFO
836 "aha152x%d%s: "
837 "vital data: rev=%x, "
838 "io=0x%03lx (0x%03lx/0x%03lx), "
839 "irq=%d, "
840 "scsiid=%d, "
841 "reconnect=%s, "
842 "parity=%s, "
843 "synchronous=%s, "
844 "delay=%d, "
845 "extended translation=%s\n",
846 shpnt->host_no, setup->tc1550 ? " (tc1550 mode)" : "",
847 GETPORT(REV) & 0x7,
848 shpnt->io_port, HOSTIOPORT0, HOSTIOPORT1,
849 shpnt->irq,
850 shpnt->this_id,
851 RECONNECT ? "enabled" : "disabled",
852 PARITY ? "enabled" : "disabled",
853 SYNCHRONOUS ? "enabled" : "disabled",
854 DELAY,
855 EXT_TRANS ? "enabled" : "disabled");
856
857 /* not expecting any interrupts */
858 SETPORT(SIMODE0, 0);
859 SETPORT(SIMODE1, 0);
860
861 if( request_irq(shpnt->irq, swintr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) {
862 printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq);
863 goto out_host_put;
864 }
865
866 HOSTDATA(shpnt)->swint = 0;
867
868 printk(KERN_INFO "aha152x%d: trying software interrupt, ", shpnt->host_no);
869
870 mb();
871 SETPORT(DMACNTRL0, SWINT|INTEN);
872 mdelay(1000);
873 free_irq(shpnt->irq, shpnt);
874
875 if (!HOSTDATA(shpnt)->swint) {
876 if (TESTHI(DMASTAT, INTSTAT)) {
877 printk("lost.\n");
878 } else {
879 printk("failed.\n");
880 }
881
882 SETPORT(DMACNTRL0, INTEN);
883
884 printk(KERN_ERR "aha152x%d: irq %d possibly wrong. "
885 "Please verify.\n", shpnt->host_no, shpnt->irq);
886 goto out_host_put;
887 }
888 printk("ok.\n");
889
890
891 /* clear interrupts */
892 SETPORT(SSTAT0, 0x7f);
893 SETPORT(SSTAT1, 0xef);
894
895 if ( request_irq(shpnt->irq, intr, IRQF_DISABLED|IRQF_SHARED, "aha152x", shpnt) ) {
896 printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq);
897 goto out_host_put;
898 }
899
900 if( scsi_add_host(shpnt, NULL) ) {
901 free_irq(shpnt->irq, shpnt);
902 printk(KERN_ERR "aha152x%d: failed to add host.\n", shpnt->host_no);
903 goto out_host_put;
904 }
905
906 scsi_scan_host(shpnt);
907
908 return shpnt;
909
910out_host_put:
911 list_del(&HOSTDATA(shpnt)->host_list);
912 scsi_host_put(shpnt);
913
914 return NULL;
915}
916
917void aha152x_release(struct Scsi_Host *shpnt)
918{
919 if (!shpnt)
920 return;
921
922 scsi_remove_host(shpnt);
923 if (shpnt->irq)
924 free_irq(shpnt->irq, shpnt);
925
926#if !defined(PCMCIA)
927 if (shpnt->io_port)
928 release_region(shpnt->io_port, IO_RANGE);
929#endif
930
931#ifdef __ISAPNP__
932 if (HOSTDATA(shpnt)->pnpdev)
933 pnp_device_detach(HOSTDATA(shpnt)->pnpdev);
934#endif
935
936 list_del(&HOSTDATA(shpnt)->host_list);
937 scsi_host_put(shpnt);
938}
939
940
941/*
942 * setup controller to generate interrupts depending
943 * on current state (lock has to be acquired)
944 *
945 */
946static int setup_expected_interrupts(struct Scsi_Host *shpnt)
947{
948 if(CURRENT_SC) {
949 CURRENT_SC->SCp.phase |= 1 << 16;
950
951 if(CURRENT_SC->SCp.phase & selecting) {
952 DPRINTK(debug_intr, DEBUG_LEAD "expecting: (seldo) (seltimo) (seldi)\n", CMDINFO(CURRENT_SC));
953 SETPORT(SSTAT1, SELTO);
954 SETPORT(SIMODE0, ENSELDO | (DISCONNECTED_SC ? ENSELDI : 0));
955 SETPORT(SIMODE1, ENSELTIMO);
956 } else {
957 DPRINTK(debug_intr, DEBUG_LEAD "expecting: (phase change) (busfree) %s\n", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.phase & spiordy ? "(spiordy)" : "");
958 SETPORT(SIMODE0, (CURRENT_SC->SCp.phase & spiordy) ? ENSPIORDY : 0);
959 SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
960 }
961 } else if(STATE==seldi) {
962 DPRINTK(debug_intr, DEBUG_LEAD "expecting: (phase change) (identify)\n", CMDINFO(CURRENT_SC));
963 SETPORT(SIMODE0, 0);
964 SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
965 } else {
966 DPRINTK(debug_intr, DEBUG_LEAD "expecting: %s %s\n",
967 CMDINFO(CURRENT_SC),
968 DISCONNECTED_SC ? "(reselection)" : "",
969 ISSUE_SC ? "(busfree)" : "");
970 SETPORT(SIMODE0, DISCONNECTED_SC ? ENSELDI : 0);
971 SETPORT(SIMODE1, ENSCSIRST | ( (ISSUE_SC||DONE_SC) ? ENBUSFREE : 0));
972 }
973
974 if(!HOSTDATA(shpnt)->in_intr)
975 SETBITS(DMACNTRL0, INTEN);
976
977 return TESTHI(DMASTAT, INTSTAT);
978}
979
980
981/*
982 * Queue a command and setup interrupts for a free bus.
983 */
984static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct completion *complete,
985 int phase, void (*done)(Scsi_Cmnd *))
986{
987 struct Scsi_Host *shpnt = SCpnt->device->host;
988 unsigned long flags;
989
990#if defined(AHA152X_DEBUG)
991 if (HOSTDATA(shpnt)->debug & debug_queue) {
992 printk(INFO_LEAD "queue: %p; cmd_len=%d pieces=%d size=%u cmnd=",
993 CMDINFO(SCpnt), SCpnt, SCpnt->cmd_len,
994 scsi_sg_count(SCpnt), scsi_bufflen(SCpnt));
995 __scsi_print_command(SCpnt->cmnd);
996 }
997#endif
998
999 SCpnt->scsi_done = done;
1000 SCpnt->SCp.phase = not_issued | phase;
1001 SCpnt->SCp.Status = 0x1; /* Ilegal status by SCSI standard */
1002 SCpnt->SCp.Message = 0;
1003 SCpnt->SCp.have_data_in = 0;
1004 SCpnt->SCp.sent_command = 0;
1005
1006 if(SCpnt->SCp.phase & (resetting|check_condition)) {
1007 if (!SCpnt->host_scribble || SCSEM(SCpnt) || SCNEXT(SCpnt)) {
1008 printk(ERR_LEAD "cannot reuse command\n", CMDINFO(SCpnt));
1009 return FAILED;
1010 }
1011 } else {
1012 SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
1013 if(!SCpnt->host_scribble) {
1014 printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt));
1015 return FAILED;
1016 }
1017 }
1018
1019 SCNEXT(SCpnt) = NULL;
1020 SCSEM(SCpnt) = complete;
1021
1022 /* setup scratch area
1023 SCp.ptr : buffer pointer
1024 SCp.this_residual : buffer length
1025 SCp.buffer : next buffer
1026 SCp.buffers_residual : left buffers in list
1027 SCp.phase : current state of the command */
1028
1029 if ((phase & resetting) || !scsi_sglist(SCpnt)) {
1030 SCpnt->SCp.ptr = NULL;
1031 SCpnt->SCp.this_residual = 0;
1032 scsi_set_resid(SCpnt, 0);
1033 SCpnt->SCp.buffer = NULL;
1034 SCpnt->SCp.buffers_residual = 0;
1035 } else {
1036 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
1037 SCpnt->SCp.buffer = scsi_sglist(SCpnt);
1038 SCpnt->SCp.ptr = SG_ADDRESS(SCpnt->SCp.buffer);
1039 SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
1040 SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1;
1041 }
1042
1043 DO_LOCK(flags);
1044
1045#if defined(AHA152X_STAT)
1046 HOSTDATA(shpnt)->total_commands++;
1047#endif
1048
1049 /* Turn led on, when this is the first command. */
1050 HOSTDATA(shpnt)->commands++;
1051 if (HOSTDATA(shpnt)->commands==1)
1052 SETPORT(PORTA, 1);
1053
1054 append_SC(&ISSUE_SC, SCpnt);
1055
1056 if(!HOSTDATA(shpnt)->in_intr)
1057 setup_expected_interrupts(shpnt);
1058
1059 DO_UNLOCK(flags);
1060
1061 return 0;
1062}
1063
1064/*
1065 * queue a command
1066 *
1067 */
1068static int aha152x_queue_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
1069{
1070#if 0
1071 if(*SCpnt->cmnd == REQUEST_SENSE) {
1072 SCpnt->result = 0;
1073 done(SCpnt);
1074
1075 return 0;
1076 }
1077#endif
1078
1079 return aha152x_internal_queue(SCpnt, NULL, 0, done);
1080}
1081
1082static DEF_SCSI_QCMD(aha152x_queue)
1083
1084
1085/*
1086 *
1087 *
1088 */
1089static void reset_done(Scsi_Cmnd *SCpnt)
1090{
1091#if 0
1092 struct Scsi_Host *shpnt = SCpnt->host;
1093 DPRINTK(debug_eh, INFO_LEAD "reset_done called\n", CMDINFO(SCpnt));
1094#endif
1095 if(SCSEM(SCpnt)) {
1096 complete(SCSEM(SCpnt));
1097 } else {
1098 printk(KERN_ERR "aha152x: reset_done w/o completion\n");
1099 }
1100}
1101
1102/*
1103 * Abort a command
1104 *
1105 */
1106static int aha152x_abort(Scsi_Cmnd *SCpnt)
1107{
1108 struct Scsi_Host *shpnt = SCpnt->device->host;
1109 Scsi_Cmnd *ptr;
1110 unsigned long flags;
1111
1112#if defined(AHA152X_DEBUG)
1113 if(HOSTDATA(shpnt)->debug & debug_eh) {
1114 printk(DEBUG_LEAD "abort(%p)", CMDINFO(SCpnt), SCpnt);
1115 show_queues(shpnt);
1116 }
1117#endif
1118
1119 DO_LOCK(flags);
1120
1121 ptr=remove_SC(&ISSUE_SC, SCpnt);
1122
1123 if(ptr) {
1124 DPRINTK(debug_eh, DEBUG_LEAD "not yet issued - SUCCESS\n", CMDINFO(SCpnt));
1125
1126 HOSTDATA(shpnt)->commands--;
1127 if (!HOSTDATA(shpnt)->commands)
1128 SETPORT(PORTA, 0);
1129 DO_UNLOCK(flags);
1130
1131 kfree(SCpnt->host_scribble);
1132 SCpnt->host_scribble=NULL;
1133
1134 return SUCCESS;
1135 }
1136
1137 DO_UNLOCK(flags);
1138
1139 /*
1140 * FIXME:
1141 * for current command: queue ABORT for message out and raise ATN
1142 * for disconnected command: pseudo SC with ABORT message or ABORT on reselection?
1143 *
1144 */
1145
1146 printk(ERR_LEAD "cannot abort running or disconnected command\n", CMDINFO(SCpnt));
1147
1148 return FAILED;
1149}
1150
1151/*
1152 * Reset a device
1153 *
1154 */
1155static int aha152x_device_reset(Scsi_Cmnd * SCpnt)
1156{
1157 struct Scsi_Host *shpnt = SCpnt->device->host;
1158 DECLARE_COMPLETION(done);
1159 int ret, issued, disconnected;
1160 unsigned char old_cmd_len = SCpnt->cmd_len;
1161 unsigned long flags;
1162 unsigned long timeleft;
1163
1164#if defined(AHA152X_DEBUG)
1165 if(HOSTDATA(shpnt)->debug & debug_eh) {
1166 printk(INFO_LEAD "aha152x_device_reset(%p)", CMDINFO(SCpnt), SCpnt);
1167 show_queues(shpnt);
1168 }
1169#endif
1170
1171 if(CURRENT_SC==SCpnt) {
1172 printk(ERR_LEAD "cannot reset current device\n", CMDINFO(SCpnt));
1173 return FAILED;
1174 }
1175
1176 DO_LOCK(flags);
1177 issued = remove_SC(&ISSUE_SC, SCpnt) == NULL;
1178 disconnected = issued && remove_SC(&DISCONNECTED_SC, SCpnt);
1179 DO_UNLOCK(flags);
1180
1181 SCpnt->cmd_len = 0;
1182
1183 aha152x_internal_queue(SCpnt, &done, resetting, reset_done);
1184
1185 timeleft = wait_for_completion_timeout(&done, 100*HZ);
1186 if (!timeleft) {
1187 /* remove command from issue queue */
1188 DO_LOCK(flags);
1189 remove_SC(&ISSUE_SC, SCpnt);
1190 DO_UNLOCK(flags);
1191 }
1192
1193 SCpnt->cmd_len = old_cmd_len;
1194
1195 DO_LOCK(flags);
1196
1197 if(SCpnt->SCp.phase & resetted) {
1198 HOSTDATA(shpnt)->commands--;
1199 if (!HOSTDATA(shpnt)->commands)
1200 SETPORT(PORTA, 0);
1201 kfree(SCpnt->host_scribble);
1202 SCpnt->host_scribble=NULL;
1203
1204 ret = SUCCESS;
1205 } else {
1206 /* requeue */
1207 if(!issued) {
1208 append_SC(&ISSUE_SC, SCpnt);
1209 } else if(disconnected) {
1210 append_SC(&DISCONNECTED_SC, SCpnt);
1211 }
1212
1213 ret = FAILED;
1214 }
1215
1216 DO_UNLOCK(flags);
1217 return ret;
1218}
1219
1220static void free_hard_reset_SCs(struct Scsi_Host *shpnt, Scsi_Cmnd **SCs)
1221{
1222 Scsi_Cmnd *ptr;
1223
1224 ptr=*SCs;
1225 while(ptr) {
1226 Scsi_Cmnd *next;
1227
1228 if(SCDATA(ptr)) {
1229 next = SCNEXT(ptr);
1230 } else {
1231 printk(DEBUG_LEAD "queue corrupted at %p\n", CMDINFO(ptr), ptr);
1232 next = NULL;
1233 }
1234
1235 if (!ptr->device->soft_reset) {
1236 DPRINTK(debug_eh, DEBUG_LEAD "disconnected command %p removed\n", CMDINFO(ptr), ptr);
1237 remove_SC(SCs, ptr);
1238 HOSTDATA(shpnt)->commands--;
1239 kfree(ptr->host_scribble);
1240 ptr->host_scribble=NULL;
1241 }
1242
1243 ptr = next;
1244 }
1245}
1246
1247/*
1248 * Reset the bus
1249 *
1250 */
1251static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
1252{
1253 unsigned long flags;
1254
1255 DO_LOCK(flags);
1256
1257#if defined(AHA152X_DEBUG)
1258 if(HOSTDATA(shpnt)->debug & debug_eh) {
1259 printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
1260 show_queues(shpnt);
1261 }
1262#endif
1263
1264 free_hard_reset_SCs(shpnt, &ISSUE_SC);
1265 free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
1266
1267 DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
1268
1269 SETPORT(SCSISEQ, SCSIRSTO);
1270 mdelay(256);
1271 SETPORT(SCSISEQ, 0);
1272 mdelay(DELAY);
1273
1274 DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
1275
1276 setup_expected_interrupts(shpnt);
1277 if(HOSTDATA(shpnt)->commands==0)
1278 SETPORT(PORTA, 0);
1279
1280 DO_UNLOCK(flags);
1281
1282 return SUCCESS;
1283}
1284
1285/*
1286 * Reset the bus
1287 *
1288 */
1289static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
1290{
1291 return aha152x_bus_reset_host(SCpnt->device->host);
1292}
1293
1294/*
1295 * Restore default values to the AIC-6260 registers and reset the fifos
1296 *
1297 */
1298static void reset_ports(struct Scsi_Host *shpnt)
1299{
1300 unsigned long flags;
1301
1302 /* disable interrupts */
1303 SETPORT(DMACNTRL0, RSTFIFO);
1304
1305 SETPORT(SCSISEQ, 0);
1306
1307 SETPORT(SXFRCTL1, 0);
1308 SETPORT(SCSISIG, 0);
1309 SETRATE(0);
1310
1311 /* clear all interrupt conditions */
1312 SETPORT(SSTAT0, 0x7f);
1313 SETPORT(SSTAT1, 0xef);
1314
1315 SETPORT(SSTAT4, SYNCERR | FWERR | FRERR);
1316
1317 SETPORT(DMACNTRL0, 0);
1318 SETPORT(DMACNTRL1, 0);
1319
1320 SETPORT(BRSTCNTRL, 0xf1);
1321
1322 /* clear SCSI fifos and transfer count */
1323 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
1324 SETPORT(SXFRCTL0, CH1);
1325
1326 DO_LOCK(flags);
1327 setup_expected_interrupts(shpnt);
1328 DO_UNLOCK(flags);
1329}
1330
1331/*
1332 * Reset the host (bus and controller)
1333 *
1334 */
1335int aha152x_host_reset_host(struct Scsi_Host *shpnt)
1336{
1337 DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
1338
1339 aha152x_bus_reset_host(shpnt);
1340
1341 DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
1342 reset_ports(shpnt);
1343
1344 return SUCCESS;
1345}
1346
1347/*
1348 * Reset the host (bus and controller)
1349 *
1350 */
1351static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
1352{
1353 return aha152x_host_reset_host(SCpnt->device->host);
1354}
1355
1356/*
1357 * Return the "logical geometry"
1358 *
1359 */
1360static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1361 sector_t capacity, int *info_array)
1362{
1363 struct Scsi_Host *shpnt = sdev->host;
1364
1365 /* try default translation */
1366 info_array[0] = 64;
1367 info_array[1] = 32;
1368 info_array[2] = (unsigned long)capacity / (64 * 32);
1369
1370 /* for disks >1GB do some guessing */
1371 if (info_array[2] >= 1024) {
1372 int info[3];
1373
1374 /* try to figure out the geometry from the partition table */
1375 if (scsicam_bios_param(bdev, capacity, info) < 0 ||
1376 !((info[0] == 64 && info[1] == 32) || (info[0] == 255 && info[1] == 63))) {
1377 if (EXT_TRANS) {
1378 printk(KERN_NOTICE
1379 "aha152x: unable to verify geometry for disk with >1GB.\n"
1380 " using extended translation.\n");
1381 info_array[0] = 255;
1382 info_array[1] = 63;
1383 info_array[2] = (unsigned long)capacity / (255 * 63);
1384 } else {
1385 printk(KERN_NOTICE
1386 "aha152x: unable to verify geometry for disk with >1GB.\n"
1387 " Using default translation. Please verify yourself.\n"
1388 " Perhaps you need to enable extended translation in the driver.\n"
1389 " See Documentation/scsi/aha152x.txt for details.\n");
1390 }
1391 } else {
1392 info_array[0] = info[0];
1393 info_array[1] = info[1];
1394 info_array[2] = info[2];
1395
1396 if (info[0] == 255 && !EXT_TRANS) {
1397 printk(KERN_NOTICE
1398 "aha152x: current partition table is using extended translation.\n"
1399 " using it also, although it's not explicitly enabled.\n");
1400 }
1401 }
1402 }
1403
1404 return 0;
1405}
1406
1407/*
1408 * Internal done function
1409 *
1410 */
1411static void done(struct Scsi_Host *shpnt, int error)
1412{
1413 if (CURRENT_SC) {
1414 if(DONE_SC)
1415 printk(ERR_LEAD "there's already a completed command %p - will cause abort\n", CMDINFO(CURRENT_SC), DONE_SC);
1416
1417 DONE_SC = CURRENT_SC;
1418 CURRENT_SC = NULL;
1419 DONE_SC->result = error;
1420 } else
1421 printk(KERN_ERR "aha152x: done() called outside of command\n");
1422}
1423
1424static struct work_struct aha152x_tq;
1425
1426/*
1427 * Run service completions on the card with interrupts enabled.
1428 *
1429 */
1430static void run(struct work_struct *work)
1431{
1432 struct aha152x_hostdata *hd;
1433
1434 list_for_each_entry(hd, &aha152x_host_list, host_list) {
1435 struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
1436
1437 is_complete(shost);
1438 }
1439}
1440
1441/*
1442 * Interrupt handler
1443 *
1444 */
1445static irqreturn_t intr(int irqno, void *dev_id)
1446{
1447 struct Scsi_Host *shpnt = dev_id;
1448 unsigned long flags;
1449 unsigned char rev, dmacntrl0;
1450
1451 /*
1452 * Read a couple of registers that are known to not be all 1's. If
1453 * we read all 1's (-1), that means that either:
1454 *
1455 * a. The host adapter chip has gone bad, and we cannot control it,
1456 * OR
1457 * b. The host adapter is a PCMCIA card that has been ejected
1458 *
1459 * In either case, we cannot do anything with the host adapter at
1460 * this point in time. So just ignore the interrupt and return.
1461 * In the latter case, the interrupt might actually be meant for
1462 * someone else sharing this IRQ, and that driver will handle it.
1463 */
1464 rev = GETPORT(REV);
1465 dmacntrl0 = GETPORT(DMACNTRL0);
1466 if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
1467 return IRQ_NONE;
1468
1469 if( TESTLO(DMASTAT, INTSTAT) )
1470 return IRQ_NONE;
1471
1472 /* no more interrupts from the controller, while we're busy.
1473 INTEN is restored by the BH handler */
1474 CLRBITS(DMACNTRL0, INTEN);
1475
1476 DO_LOCK(flags);
1477 if( HOSTDATA(shpnt)->service==0 ) {
1478 HOSTDATA(shpnt)->service=1;
1479
1480 /* Poke the BH handler */
1481 INIT_WORK(&aha152x_tq, run);
1482 schedule_work(&aha152x_tq);
1483 }
1484 DO_UNLOCK(flags);
1485
1486 return IRQ_HANDLED;
1487}
1488
1489/*
1490 * busfree phase
1491 * - handle completition/disconnection/error of current command
1492 * - start selection for next command (if any)
1493 */
1494static void busfree_run(struct Scsi_Host *shpnt)
1495{
1496 unsigned long flags;
1497#if defined(AHA152X_STAT)
1498 int action=0;
1499#endif
1500
1501 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
1502 SETPORT(SXFRCTL0, CH1);
1503
1504 SETPORT(SSTAT1, CLRBUSFREE);
1505
1506 if(CURRENT_SC) {
1507#if defined(AHA152X_STAT)
1508 action++;
1509#endif
1510 CURRENT_SC->SCp.phase &= ~syncneg;
1511
1512 if(CURRENT_SC->SCp.phase & completed) {
1513 /* target sent COMMAND COMPLETE */
1514 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16));
1515
1516 } else if(CURRENT_SC->SCp.phase & aborted) {
1517 DPRINTK(debug_eh, DEBUG_LEAD "ABORT sent\n", CMDINFO(CURRENT_SC));
1518 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_ABORT << 16));
1519
1520 } else if(CURRENT_SC->SCp.phase & resetted) {
1521 DPRINTK(debug_eh, DEBUG_LEAD "BUS DEVICE RESET sent\n", CMDINFO(CURRENT_SC));
1522 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_RESET << 16));
1523
1524 } else if(CURRENT_SC->SCp.phase & disconnected) {
1525 /* target sent DISCONNECT */
1526 DPRINTK(debug_selection, DEBUG_LEAD "target disconnected at %d/%d\n",
1527 CMDINFO(CURRENT_SC),
1528 scsi_get_resid(CURRENT_SC),
1529 scsi_bufflen(CURRENT_SC));
1530#if defined(AHA152X_STAT)
1531 HOSTDATA(shpnt)->disconnections++;
1532#endif
1533 append_SC(&DISCONNECTED_SC, CURRENT_SC);
1534 CURRENT_SC->SCp.phase |= 1 << 16;
1535 CURRENT_SC = NULL;
1536
1537 } else {
1538 done(shpnt, DID_ERROR << 16);
1539 }
1540#if defined(AHA152X_STAT)
1541 } else {
1542 HOSTDATA(shpnt)->busfree_without_old_command++;
1543#endif
1544 }
1545
1546 DO_LOCK(flags);
1547
1548 if(DONE_SC) {
1549#if defined(AHA152X_STAT)
1550 action++;
1551#endif
1552
1553 if(DONE_SC->SCp.phase & check_condition) {
1554 struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC;
1555 struct aha152x_scdata *sc = SCDATA(cmd);
1556
1557#if 0
1558 if(HOSTDATA(shpnt)->debug & debug_eh) {
1559 printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
1560 scsi_print_sense("bh", DONE_SC);
1561 }
1562#endif
1563
1564 scsi_eh_restore_cmnd(cmd, &sc->ses);
1565
1566 cmd->SCp.Status = SAM_STAT_CHECK_CONDITION;
1567
1568 HOSTDATA(shpnt)->commands--;
1569 if (!HOSTDATA(shpnt)->commands)
1570 SETPORT(PORTA, 0); /* turn led off */
1571 } else if(DONE_SC->SCp.Status==SAM_STAT_CHECK_CONDITION) {
1572#if defined(AHA152X_STAT)
1573 HOSTDATA(shpnt)->busfree_with_check_condition++;
1574#endif
1575#if 0
1576 DPRINTK(debug_eh, ERR_LEAD "CHECK CONDITION found\n", CMDINFO(DONE_SC));
1577#endif
1578
1579 if(!(DONE_SC->SCp.phase & not_issued)) {
1580 struct aha152x_scdata *sc;
1581 Scsi_Cmnd *ptr = DONE_SC;
1582 DONE_SC=NULL;
1583#if 0
1584 DPRINTK(debug_eh, ERR_LEAD "requesting sense\n", CMDINFO(ptr));
1585#endif
1586
1587 sc = SCDATA(ptr);
1588 /* It was allocated in aha152x_internal_queue? */
1589 BUG_ON(!sc);
1590 scsi_eh_prep_cmnd(ptr, &sc->ses, NULL, 0, ~0);
1591
1592 DO_UNLOCK(flags);
1593 aha152x_internal_queue(ptr, NULL, check_condition, ptr->scsi_done);
1594 DO_LOCK(flags);
1595#if 0
1596 } else {
1597 DPRINTK(debug_eh, ERR_LEAD "command not issued - CHECK CONDITION ignored\n", CMDINFO(DONE_SC));
1598#endif
1599 }
1600 }
1601
1602 if(DONE_SC && DONE_SC->scsi_done) {
1603#if defined(AHA152X_DEBUG)
1604 int hostno=DONE_SC->device->host->host_no;
1605 int id=DONE_SC->device->id & 0xf;
1606 int lun=DONE_SC->device->lun & 0x7;
1607#endif
1608 Scsi_Cmnd *ptr = DONE_SC;
1609 DONE_SC=NULL;
1610
1611 /* turn led off, when no commands are in the driver */
1612 HOSTDATA(shpnt)->commands--;
1613 if (!HOSTDATA(shpnt)->commands)
1614 SETPORT(PORTA, 0); /* turn led off */
1615
1616 if(ptr->scsi_done != reset_done) {
1617 kfree(ptr->host_scribble);
1618 ptr->host_scribble=NULL;
1619 }
1620
1621 DO_UNLOCK(flags);
1622 DPRINTK(debug_done, DEBUG_LEAD "calling scsi_done(%p)\n", hostno, id, lun, ptr);
1623 ptr->scsi_done(ptr);
1624 DPRINTK(debug_done, DEBUG_LEAD "scsi_done(%p) returned\n", hostno, id, lun, ptr);
1625 DO_LOCK(flags);
1626 }
1627
1628 DONE_SC=NULL;
1629#if defined(AHA152X_STAT)
1630 } else {
1631 HOSTDATA(shpnt)->busfree_without_done_command++;
1632#endif
1633 }
1634
1635 if(ISSUE_SC)
1636 CURRENT_SC = remove_first_SC(&ISSUE_SC);
1637
1638 DO_UNLOCK(flags);
1639
1640 if(CURRENT_SC) {
1641#if defined(AHA152X_STAT)
1642 action++;
1643#endif
1644 CURRENT_SC->SCp.phase |= selecting;
1645
1646 DPRINTK(debug_selection, DEBUG_LEAD "selecting target\n", CMDINFO(CURRENT_SC));
1647
1648 /* clear selection timeout */
1649 SETPORT(SSTAT1, SELTO);
1650
1651 SETPORT(SCSIID, (shpnt->this_id << OID_) | CURRENT_SC->device->id);
1652 SETPORT(SXFRCTL1, (PARITY ? ENSPCHK : 0 ) | ENSTIMER);
1653 SETPORT(SCSISEQ, ENSELO | ENAUTOATNO | (DISCONNECTED_SC ? ENRESELI : 0));
1654 } else {
1655#if defined(AHA152X_STAT)
1656 HOSTDATA(shpnt)->busfree_without_new_command++;
1657#endif
1658 SETPORT(SCSISEQ, DISCONNECTED_SC ? ENRESELI : 0);
1659 }
1660
1661#if defined(AHA152X_STAT)
1662 if(!action)
1663 HOSTDATA(shpnt)->busfree_without_any_action++;
1664#endif
1665}
1666
1667/*
1668 * Selection done (OUT)
1669 * - queue IDENTIFY message and SDTR to selected target for message out
1670 * (ATN asserted automagically via ENAUTOATNO in busfree())
1671 */
1672static void seldo_run(struct Scsi_Host *shpnt)
1673{
1674 SETPORT(SCSISIG, 0);
1675 SETPORT(SSTAT1, CLRBUSFREE);
1676 SETPORT(SSTAT1, CLRPHASECHG);
1677
1678 CURRENT_SC->SCp.phase &= ~(selecting|not_issued);
1679
1680 SETPORT(SCSISEQ, 0);
1681
1682 if (TESTLO(SSTAT0, SELDO)) {
1683 printk(ERR_LEAD "aha152x: passing bus free condition\n", CMDINFO(CURRENT_SC));
1684 done(shpnt, DID_NO_CONNECT << 16);
1685 return;
1686 }
1687
1688 SETPORT(SSTAT0, CLRSELDO);
1689
1690 ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
1691
1692 if (CURRENT_SC->SCp.phase & aborting) {
1693 ADDMSGO(ABORT);
1694 } else if (CURRENT_SC->SCp.phase & resetting) {
1695 ADDMSGO(BUS_DEVICE_RESET);
1696 } else if (SYNCNEG==0 && SYNCHRONOUS) {
1697 CURRENT_SC->SCp.phase |= syncneg;
1698 MSGOLEN += spi_populate_sync_msg(&MSGO(MSGOLEN), 50, 8);
1699 SYNCNEG=1; /* negotiation in progress */
1700 }
1701
1702 SETRATE(SYNCRATE);
1703}
1704
1705/*
1706 * Selection timeout
1707 * - return command to mid-level with failure cause
1708 *
1709 */
1710static void selto_run(struct Scsi_Host *shpnt)
1711{
1712 SETPORT(SCSISEQ, 0);
1713 SETPORT(SSTAT1, CLRSELTIMO);
1714
1715 DPRINTK(debug_selection, DEBUG_LEAD "selection timeout\n", CMDINFO(CURRENT_SC));
1716
1717 if(!CURRENT_SC) {
1718 DPRINTK(debug_selection, DEBUG_LEAD "!CURRENT_SC\n", CMDINFO(CURRENT_SC));
1719 return;
1720 }
1721
1722 CURRENT_SC->SCp.phase &= ~selecting;
1723
1724 if (CURRENT_SC->SCp.phase & aborted) {
1725 DPRINTK(debug_selection, DEBUG_LEAD "aborted\n", CMDINFO(CURRENT_SC));
1726 done(shpnt, DID_ABORT << 16);
1727 } else if (TESTLO(SSTAT0, SELINGO)) {
1728 DPRINTK(debug_selection, DEBUG_LEAD "arbitration not won\n", CMDINFO(CURRENT_SC));
1729 done(shpnt, DID_BUS_BUSY << 16);
1730 } else {
1731 /* ARBITRATION won, but SELECTION failed */
1732 DPRINTK(debug_selection, DEBUG_LEAD "selection failed\n", CMDINFO(CURRENT_SC));
1733 done(shpnt, DID_NO_CONNECT << 16);
1734 }
1735}
1736
1737/*
1738 * Selection in done
1739 * - put current command back to issue queue
1740 * (reconnection of a disconnected nexus instead
1741 * of successful selection out)
1742 *
1743 */
1744static void seldi_run(struct Scsi_Host *shpnt)
1745{
1746 int selid;
1747 int target;
1748 unsigned long flags;
1749
1750 SETPORT(SCSISIG, 0);
1751 SETPORT(SSTAT0, CLRSELDI);
1752 SETPORT(SSTAT1, CLRBUSFREE);
1753 SETPORT(SSTAT1, CLRPHASECHG);
1754
1755 if(CURRENT_SC) {
1756 if(!(CURRENT_SC->SCp.phase & not_issued))
1757 printk(ERR_LEAD "command should not have been issued yet\n", CMDINFO(CURRENT_SC));
1758
1759 DPRINTK(debug_selection, ERR_LEAD "command requeued - reselection\n", CMDINFO(CURRENT_SC));
1760
1761 DO_LOCK(flags);
1762 append_SC(&ISSUE_SC, CURRENT_SC);
1763 DO_UNLOCK(flags);
1764
1765 CURRENT_SC = NULL;
1766 }
1767
1768 if(!DISCONNECTED_SC) {
1769 DPRINTK(debug_selection, DEBUG_LEAD "unexpected SELDI ", CMDINFO(CURRENT_SC));
1770 return;
1771 }
1772
1773 RECONN_TARGET=-1;
1774
1775 selid = GETPORT(SELID) & ~(1 << shpnt->this_id);
1776
1777 if (selid==0) {
1778 printk("aha152x%d: target id unknown (%02x)\n", HOSTNO, selid);
1779 return;
1780 }
1781
1782 for(target=7; !(selid & (1 << target)); target--)
1783 ;
1784
1785 if(selid & ~(1 << target)) {
1786 printk("aha152x%d: multiple targets reconnected (%02x)\n",
1787 HOSTNO, selid);
1788 }
1789
1790
1791 SETPORT(SCSIID, (shpnt->this_id << OID_) | target);
1792 SETPORT(SCSISEQ, 0);
1793
1794 SETRATE(HOSTDATA(shpnt)->syncrate[target]);
1795
1796 RECONN_TARGET=target;
1797 DPRINTK(debug_selection, DEBUG_LEAD "target %d reselected (%02x).\n", CMDINFO(CURRENT_SC), target, selid);
1798}
1799
1800/*
1801 * message in phase
1802 * - handle initial message after reconnection to identify
1803 * reconnecting nexus
1804 * - queue command on DISCONNECTED_SC on DISCONNECT message
1805 * - set completed flag on COMMAND COMPLETE
1806 * (other completition code moved to busfree_run)
1807 * - handle response to SDTR
1808 * - clear synchronous transfer agreements on BUS RESET
1809 *
1810 * FIXME: what about SAVE POINTERS, RESTORE POINTERS?
1811 *
1812 */
1813static void msgi_run(struct Scsi_Host *shpnt)
1814{
1815 for(;;) {
1816 int sstat1 = GETPORT(SSTAT1);
1817
1818 if(sstat1 & (PHASECHG|PHASEMIS|BUSFREE) || !(sstat1 & REQINIT))
1819 return;
1820
1821 if(TESTLO(SSTAT0,SPIORDY)) {
1822 DPRINTK(debug_msgi, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
1823 return;
1824 }
1825
1826 ADDMSGI(GETPORT(SCSIDAT));
1827
1828#if defined(AHA152X_DEBUG)
1829 if (HOSTDATA(shpnt)->debug & debug_msgi) {
1830 printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0));
1831 spi_print_msg(&MSGI(0));
1832 printk("\n");
1833 }
1834#endif
1835
1836 if(!CURRENT_SC) {
1837 if(LASTSTATE!=seldi) {
1838 printk(KERN_ERR "aha152x%d: message in w/o current command not after reselection\n", HOSTNO);
1839 }
1840
1841 /*
1842 * Handle reselection
1843 */
1844 if(!(MSGI(0) & IDENTIFY_BASE)) {
1845 printk(KERN_ERR "aha152x%d: target didn't identify after reselection\n", HOSTNO);
1846 continue;
1847 }
1848
1849 CURRENT_SC = remove_lun_SC(&DISCONNECTED_SC, RECONN_TARGET, MSGI(0) & 0x3f);
1850
1851 if (!CURRENT_SC) {
1852 show_queues(shpnt);
1853 printk(KERN_ERR "aha152x%d: no disconnected command for target %d/%d\n", HOSTNO, RECONN_TARGET, MSGI(0) & 0x3f);
1854 continue;
1855 }
1856
1857 DPRINTK(debug_msgi, DEBUG_LEAD "target reconnected\n", CMDINFO(CURRENT_SC));
1858
1859 CURRENT_SC->SCp.Message = MSGI(0);
1860 CURRENT_SC->SCp.phase &= ~disconnected;
1861
1862 MSGILEN=0;
1863
1864 /* next message if any */
1865 continue;
1866 }
1867
1868 CURRENT_SC->SCp.Message = MSGI(0);
1869
1870 switch (MSGI(0)) {
1871 case DISCONNECT:
1872 if (!RECONNECT)
1873 printk(WARN_LEAD "target was not allowed to disconnect\n", CMDINFO(CURRENT_SC));
1874
1875 CURRENT_SC->SCp.phase |= disconnected;
1876 break;
1877
1878 case COMMAND_COMPLETE:
1879 if(CURRENT_SC->SCp.phase & completed)
1880 DPRINTK(debug_msgi, DEBUG_LEAD "again COMMAND COMPLETE\n", CMDINFO(CURRENT_SC));
1881
1882 CURRENT_SC->SCp.phase |= completed;
1883 break;
1884
1885 case MESSAGE_REJECT:
1886 if (SYNCNEG==1) {
1887 printk(INFO_LEAD "Synchronous Data Transfer Request was rejected\n", CMDINFO(CURRENT_SC));
1888 SYNCNEG=2; /* negotiation completed */
1889 } else
1890 printk(INFO_LEAD "inbound message (MESSAGE REJECT)\n", CMDINFO(CURRENT_SC));
1891 break;
1892
1893 case SAVE_POINTERS:
1894 break;
1895
1896 case RESTORE_POINTERS:
1897 break;
1898
1899 case EXTENDED_MESSAGE:
1900 if(MSGILEN<2 || MSGILEN<MSGI(1)+2) {
1901 /* not yet completed */
1902 continue;
1903 }
1904
1905 switch (MSGI(2)) {
1906 case EXTENDED_SDTR:
1907 {
1908 long ticks;
1909
1910 if (MSGI(1) != 3) {
1911 printk(ERR_LEAD "SDTR message length!=3\n", CMDINFO(CURRENT_SC));
1912 break;
1913 }
1914
1915 if (!HOSTDATA(shpnt)->synchronous)
1916 break;
1917
1918 printk(INFO_LEAD, CMDINFO(CURRENT_SC));
1919 spi_print_msg(&MSGI(0));
1920 printk("\n");
1921
1922 ticks = (MSGI(3) * 4 + 49) / 50;
1923
1924 if (syncneg) {
1925 /* negotiation in progress */
1926 if (ticks > 9 || MSGI(4) < 1 || MSGI(4) > 8) {
1927 ADDMSGO(MESSAGE_REJECT);
1928 printk(INFO_LEAD "received Synchronous Data Transfer Request invalid - rejected\n", CMDINFO(CURRENT_SC));
1929 break;
1930 }
1931
1932 SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
1933 } else if (ticks <= 9 && MSGI(4) >= 1) {
1934 ADDMSGO(EXTENDED_MESSAGE);
1935 ADDMSGO(3);
1936 ADDMSGO(EXTENDED_SDTR);
1937 if (ticks < 4) {
1938 ticks = 4;
1939 ADDMSGO(50);
1940 } else
1941 ADDMSGO(MSGI(3));
1942
1943 if (MSGI(4) > 8)
1944 MSGI(4) = 8;
1945
1946 ADDMSGO(MSGI(4));
1947
1948 SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
1949 } else {
1950 /* requested SDTR is too slow, do it asynchronously */
1951 printk(INFO_LEAD "Synchronous Data Transfer Request too slow - Rejecting\n", CMDINFO(CURRENT_SC));
1952 ADDMSGO(MESSAGE_REJECT);
1953 }
1954
1955 SYNCNEG=2; /* negotiation completed */
1956 SETRATE(SYNCRATE);
1957 }
1958 break;
1959
1960 case BUS_DEVICE_RESET:
1961 {
1962 int i;
1963
1964 for(i=0; i<8; i++) {
1965 HOSTDATA(shpnt)->syncrate[i]=0;
1966 HOSTDATA(shpnt)->syncneg[i]=0;
1967 }
1968
1969 }
1970 break;
1971
1972 case EXTENDED_MODIFY_DATA_POINTER:
1973 case EXTENDED_EXTENDED_IDENTIFY:
1974 case EXTENDED_WDTR:
1975 default:
1976 ADDMSGO(MESSAGE_REJECT);
1977 break;
1978 }
1979 break;
1980 }
1981
1982 MSGILEN=0;
1983 }
1984}
1985
1986static void msgi_end(struct Scsi_Host *shpnt)
1987{
1988 if(MSGILEN>0)
1989 printk(WARN_LEAD "target left before message completed (%d)\n", CMDINFO(CURRENT_SC), MSGILEN);
1990
1991 if (MSGOLEN > 0 && !(GETPORT(SSTAT1) & BUSFREE)) {
1992 DPRINTK(debug_msgi, DEBUG_LEAD "msgo pending\n", CMDINFO(CURRENT_SC));
1993 SETPORT(SCSISIG, P_MSGI | SIG_ATNO);
1994 }
1995}
1996
1997/*
1998 * message out phase
1999 *
2000 */
2001static void msgo_init(struct Scsi_Host *shpnt)
2002{
2003 if(MSGOLEN==0) {
2004 if((CURRENT_SC->SCp.phase & syncneg) && SYNCNEG==2 && SYNCRATE==0) {
2005 ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
2006 } else {
2007 printk(INFO_LEAD "unexpected MESSAGE OUT phase; rejecting\n", CMDINFO(CURRENT_SC));
2008 ADDMSGO(MESSAGE_REJECT);
2009 }
2010 }
2011
2012#if defined(AHA152X_DEBUG)
2013 if(HOSTDATA(shpnt)->debug & debug_msgo) {
2014 int i;
2015
2016 printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC));
2017 for (i=0; i<MSGOLEN; i+=spi_print_msg(&MSGO(i)), printk(" "))
2018 ;
2019 printk(")\n");
2020 }
2021#endif
2022}
2023
2024/*
2025 * message out phase
2026 *
2027 */
2028static void msgo_run(struct Scsi_Host *shpnt)
2029{
2030 if(MSGO_I==MSGOLEN)
2031 DPRINTK(debug_msgo, DEBUG_LEAD "messages all sent (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO_I, MSGOLEN);
2032
2033 while(MSGO_I<MSGOLEN) {
2034 DPRINTK(debug_msgo, DEBUG_LEAD "message byte %02x (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO(MSGO_I), MSGO_I, MSGOLEN);
2035
2036 if(TESTLO(SSTAT0, SPIORDY)) {
2037 DPRINTK(debug_msgo, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
2038 return;
2039 }
2040
2041 if (MSGO_I==MSGOLEN-1) {
2042 /* Leave MESSAGE OUT after transfer */
2043 SETPORT(SSTAT1, CLRATNO);
2044 }
2045
2046
2047 if (MSGO(MSGO_I) & IDENTIFY_BASE)
2048 CURRENT_SC->SCp.phase |= identified;
2049
2050 if (MSGO(MSGO_I)==ABORT)
2051 CURRENT_SC->SCp.phase |= aborted;
2052
2053 if (MSGO(MSGO_I)==BUS_DEVICE_RESET)
2054 CURRENT_SC->SCp.phase |= resetted;
2055
2056 SETPORT(SCSIDAT, MSGO(MSGO_I++));
2057 }
2058}
2059
2060static void msgo_end(struct Scsi_Host *shpnt)
2061{
2062 if(MSGO_I<MSGOLEN) {
2063 printk(ERR_LEAD "message sent incompletely (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO_I, MSGOLEN);
2064 if(SYNCNEG==1) {
2065 printk(INFO_LEAD "Synchronous Data Transfer Request was rejected\n", CMDINFO(CURRENT_SC));
2066 SYNCNEG=2;
2067 }
2068 }
2069
2070 MSGO_I = 0;
2071 MSGOLEN = 0;
2072}
2073
2074/*
2075 * command phase
2076 *
2077 */
2078static void cmd_init(struct Scsi_Host *shpnt)
2079{
2080 if (CURRENT_SC->SCp.sent_command) {
2081 printk(ERR_LEAD "command already sent\n", CMDINFO(CURRENT_SC));
2082 done(shpnt, DID_ERROR << 16);
2083 return;
2084 }
2085
2086#if defined(AHA152X_DEBUG)
2087 if (HOSTDATA(shpnt)->debug & debug_cmd) {
2088 printk(DEBUG_LEAD "cmd_init: ", CMDINFO(CURRENT_SC));
2089 __scsi_print_command(CURRENT_SC->cmnd);
2090 }
2091#endif
2092
2093 CMD_I=0;
2094}
2095
2096/*
2097 * command phase
2098 *
2099 */
2100static void cmd_run(struct Scsi_Host *shpnt)
2101{
2102 if(CMD_I==CURRENT_SC->cmd_len) {
2103 DPRINTK(debug_cmd, DEBUG_LEAD "command already completely sent (%d/%d)", CMDINFO(CURRENT_SC), CMD_I, CURRENT_SC->cmd_len);
2104 disp_ports(shpnt);
2105 }
2106
2107 while(CMD_I<CURRENT_SC->cmd_len) {
2108 DPRINTK(debug_cmd, DEBUG_LEAD "command byte %02x (%d/%d)\n", CMDINFO(CURRENT_SC), CURRENT_SC->cmnd[CMD_I], CMD_I, CURRENT_SC->cmd_len);
2109
2110 if(TESTLO(SSTAT0, SPIORDY)) {
2111 DPRINTK(debug_cmd, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
2112 return;
2113 }
2114
2115 SETPORT(SCSIDAT, CURRENT_SC->cmnd[CMD_I++]);
2116 }
2117}
2118
2119static void cmd_end(struct Scsi_Host *shpnt)
2120{
2121 if(CMD_I<CURRENT_SC->cmd_len)
2122 printk(ERR_LEAD "command sent incompletely (%d/%d)\n", CMDINFO(CURRENT_SC), CMD_I, CURRENT_SC->cmd_len);
2123 else
2124 CURRENT_SC->SCp.sent_command++;
2125}
2126
2127/*
2128 * status phase
2129 *
2130 */
2131static void status_run(struct Scsi_Host *shpnt)
2132{
2133 if(TESTLO(SSTAT0,SPIORDY)) {
2134 DPRINTK(debug_status, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
2135 return;
2136 }
2137
2138 CURRENT_SC->SCp.Status = GETPORT(SCSIDAT);
2139
2140#if defined(AHA152X_DEBUG)
2141 if (HOSTDATA(shpnt)->debug & debug_status) {
2142 printk(DEBUG_LEAD "inbound status %02x ", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.Status);
2143 scsi_print_status(CURRENT_SC->SCp.Status);
2144 printk("\n");
2145 }
2146#endif
2147}
2148
2149/*
2150 * data in phase
2151 *
2152 */
2153static void datai_init(struct Scsi_Host *shpnt)
2154{
2155 SETPORT(DMACNTRL0, RSTFIFO);
2156 SETPORT(DMACNTRL0, RSTFIFO|ENDMA);
2157
2158 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2159 SETPORT(SXFRCTL0, CH1|SCSIEN|DMAEN);
2160
2161 SETPORT(SIMODE0, 0);
2162 SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE);
2163
2164 DATA_LEN=0;
2165 DPRINTK(debug_datai,
2166 DEBUG_LEAD "datai_init: request_bufflen=%d resid=%d\n",
2167 CMDINFO(CURRENT_SC), scsi_bufflen(CURRENT_SC),
2168 scsi_get_resid(CURRENT_SC));
2169}
2170
2171static void datai_run(struct Scsi_Host *shpnt)
2172{
2173 unsigned long the_time;
2174 int fifodata, data_count;
2175
2176 /*
2177 * loop while the phase persists or the fifos are not empty
2178 *
2179 */
2180 while(TESTLO(DMASTAT, INTSTAT) || TESTLO(DMASTAT, DFIFOEMP) || TESTLO(SSTAT2, SEMPTY)) {
2181 /* FIXME: maybe this should be done by setting up
2182 * STCNT to trigger ENSWRAP interrupt, instead of
2183 * polling for DFIFOFULL
2184 */
2185 the_time=jiffies + 100*HZ;
2186 while(TESTLO(DMASTAT, DFIFOFULL|INTSTAT) && time_before(jiffies,the_time))
2187 barrier();
2188
2189 if(TESTLO(DMASTAT, DFIFOFULL|INTSTAT)) {
2190 printk(ERR_LEAD "datai timeout", CMDINFO(CURRENT_SC));
2191 disp_ports(shpnt);
2192 break;
2193 }
2194
2195 if(TESTHI(DMASTAT, DFIFOFULL)) {
2196 fifodata = 128;
2197 } else {
2198 the_time=jiffies + 100*HZ;
2199 while(TESTLO(SSTAT2, SEMPTY) && time_before(jiffies,the_time))
2200 barrier();
2201
2202 if(TESTLO(SSTAT2, SEMPTY)) {
2203 printk(ERR_LEAD "datai sempty timeout", CMDINFO(CURRENT_SC));
2204 disp_ports(shpnt);
2205 break;
2206 }
2207
2208 fifodata = GETPORT(FIFOSTAT);
2209 }
2210
2211 if(CURRENT_SC->SCp.this_residual>0) {
2212 while(fifodata>0 && CURRENT_SC->SCp.this_residual>0) {
2213 data_count = fifodata>CURRENT_SC->SCp.this_residual ?
2214 CURRENT_SC->SCp.this_residual :
2215 fifodata;
2216 fifodata -= data_count;
2217
2218 if(data_count & 1) {
2219 DPRINTK(debug_datai, DEBUG_LEAD "8bit\n", CMDINFO(CURRENT_SC));
2220 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2221 *CURRENT_SC->SCp.ptr++ = GETPORT(DATAPORT);
2222 CURRENT_SC->SCp.this_residual--;
2223 DATA_LEN++;
2224 SETPORT(DMACNTRL0, ENDMA);
2225 }
2226
2227 if(data_count > 1) {
2228 DPRINTK(debug_datai, DEBUG_LEAD "16bit(%d)\n", CMDINFO(CURRENT_SC), data_count);
2229 data_count >>= 1;
2230 insw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
2231 CURRENT_SC->SCp.ptr += 2 * data_count;
2232 CURRENT_SC->SCp.this_residual -= 2 * data_count;
2233 DATA_LEN += 2 * data_count;
2234 }
2235
2236 if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
2237 /* advance to next buffer */
2238 CURRENT_SC->SCp.buffers_residual--;
2239 CURRENT_SC->SCp.buffer++;
2240 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
2241 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
2242 }
2243 }
2244 } else if(fifodata>0) {
2245 printk(ERR_LEAD "no buffers left for %d(%d) bytes (data overrun!?)\n", CMDINFO(CURRENT_SC), fifodata, GETPORT(FIFOSTAT));
2246 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2247 while(fifodata>0) {
2248 int data;
2249 data=GETPORT(DATAPORT);
2250 DPRINTK(debug_datai, DEBUG_LEAD "data=%02x\n", CMDINFO(CURRENT_SC), data);
2251 fifodata--;
2252 DATA_LEN++;
2253 }
2254 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2255 }
2256 }
2257
2258 if(TESTLO(DMASTAT, INTSTAT) ||
2259 TESTLO(DMASTAT, DFIFOEMP) ||
2260 TESTLO(SSTAT2, SEMPTY) ||
2261 GETPORT(FIFOSTAT)>0) {
2262 /*
2263 * something went wrong, if there's something left in the fifos
2264 * or the phase didn't change
2265 */
2266 printk(ERR_LEAD "fifos should be empty and phase should have changed\n", CMDINFO(CURRENT_SC));
2267 disp_ports(shpnt);
2268 }
2269
2270 if(DATA_LEN!=GETSTCNT()) {
2271 printk(ERR_LEAD
2272 "manual transfer count differs from automatic (count=%d;stcnt=%d;diff=%d;fifostat=%d)",
2273 CMDINFO(CURRENT_SC), DATA_LEN, GETSTCNT(), GETSTCNT()-DATA_LEN, GETPORT(FIFOSTAT));
2274 disp_ports(shpnt);
2275 mdelay(10000);
2276 }
2277}
2278
2279static void datai_end(struct Scsi_Host *shpnt)
2280{
2281 CMD_INC_RESID(CURRENT_SC, -GETSTCNT());
2282
2283 DPRINTK(debug_datai,
2284 DEBUG_LEAD "datai_end: request_bufflen=%d resid=%d stcnt=%d\n",
2285 CMDINFO(CURRENT_SC), scsi_bufflen(CURRENT_SC),
2286 scsi_get_resid(CURRENT_SC), GETSTCNT());
2287
2288 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2289 SETPORT(DMACNTRL0, 0);
2290}
2291
2292/*
2293 * data out phase
2294 *
2295 */
2296static void datao_init(struct Scsi_Host *shpnt)
2297{
2298 SETPORT(DMACNTRL0, WRITE_READ | RSTFIFO);
2299 SETPORT(DMACNTRL0, WRITE_READ | ENDMA);
2300
2301 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2302 SETPORT(SXFRCTL0, CH1|SCSIEN|DMAEN);
2303
2304 SETPORT(SIMODE0, 0);
2305 SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE );
2306
2307 DATA_LEN = scsi_get_resid(CURRENT_SC);
2308
2309 DPRINTK(debug_datao,
2310 DEBUG_LEAD "datao_init: request_bufflen=%d; resid=%d\n",
2311 CMDINFO(CURRENT_SC), scsi_bufflen(CURRENT_SC),
2312 scsi_get_resid(CURRENT_SC));
2313}
2314
2315static void datao_run(struct Scsi_Host *shpnt)
2316{
2317 unsigned long the_time;
2318 int data_count;
2319
2320 /* until phase changes or all data sent */
2321 while(TESTLO(DMASTAT, INTSTAT) && CURRENT_SC->SCp.this_residual>0) {
2322 data_count = 128;
2323 if(data_count > CURRENT_SC->SCp.this_residual)
2324 data_count=CURRENT_SC->SCp.this_residual;
2325
2326 if(TESTLO(DMASTAT, DFIFOEMP)) {
2327 printk(ERR_LEAD "datao fifo not empty (%d)", CMDINFO(CURRENT_SC), GETPORT(FIFOSTAT));
2328 disp_ports(shpnt);
2329 break;
2330 }
2331
2332 if(data_count & 1) {
2333 SETPORT(DMACNTRL0,WRITE_READ|ENDMA|_8BIT);
2334 SETPORT(DATAPORT, *CURRENT_SC->SCp.ptr++);
2335 CURRENT_SC->SCp.this_residual--;
2336 CMD_INC_RESID(CURRENT_SC, -1);
2337 SETPORT(DMACNTRL0,WRITE_READ|ENDMA);
2338 }
2339
2340 if(data_count > 1) {
2341 data_count >>= 1;
2342 outsw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
2343 CURRENT_SC->SCp.ptr += 2 * data_count;
2344 CURRENT_SC->SCp.this_residual -= 2 * data_count;
2345 CMD_INC_RESID(CURRENT_SC, -2 * data_count);
2346 }
2347
2348 if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
2349 /* advance to next buffer */
2350 CURRENT_SC->SCp.buffers_residual--;
2351 CURRENT_SC->SCp.buffer++;
2352 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
2353 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
2354 }
2355
2356 the_time=jiffies + 100*HZ;
2357 while(TESTLO(DMASTAT, DFIFOEMP|INTSTAT) && time_before(jiffies,the_time))
2358 barrier();
2359
2360 if(TESTLO(DMASTAT, DFIFOEMP|INTSTAT)) {
2361 printk(ERR_LEAD "dataout timeout", CMDINFO(CURRENT_SC));
2362 disp_ports(shpnt);
2363 break;
2364 }
2365 }
2366}
2367
2368static void datao_end(struct Scsi_Host *shpnt)
2369{
2370 if(TESTLO(DMASTAT, DFIFOEMP)) {
2371 int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) -
2372 GETSTCNT();
2373
2374 DPRINTK(debug_datao, DEBUG_LEAD "datao: %d bytes to resend (%d written, %d transferred)\n",
2375 CMDINFO(CURRENT_SC),
2376 data_count,
2377 DATA_LEN - scsi_get_resid(CURRENT_SC),
2378 GETSTCNT());
2379
2380 CMD_INC_RESID(CURRENT_SC, data_count);
2381
2382 data_count -= CURRENT_SC->SCp.ptr -
2383 SG_ADDRESS(CURRENT_SC->SCp.buffer);
2384 while(data_count>0) {
2385 CURRENT_SC->SCp.buffer--;
2386 CURRENT_SC->SCp.buffers_residual++;
2387 data_count -= CURRENT_SC->SCp.buffer->length;
2388 }
2389 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) -
2390 data_count;
2391 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length +
2392 data_count;
2393 }
2394
2395 DPRINTK(debug_datao, DEBUG_LEAD "datao_end: request_bufflen=%d; resid=%d; stcnt=%d\n",
2396 CMDINFO(CURRENT_SC),
2397 scsi_bufflen(CURRENT_SC),
2398 scsi_get_resid(CURRENT_SC),
2399 GETSTCNT());
2400
2401 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
2402 SETPORT(SXFRCTL0, CH1);
2403
2404 SETPORT(DMACNTRL0, 0);
2405}
2406
2407/*
2408 * figure out what state we're in
2409 *
2410 */
2411static int update_state(struct Scsi_Host *shpnt)
2412{
2413 int dataphase=0;
2414 unsigned int stat0 = GETPORT(SSTAT0);
2415 unsigned int stat1 = GETPORT(SSTAT1);
2416
2417 PREVSTATE = STATE;
2418 STATE=unknown;
2419
2420 if(stat1 & SCSIRSTI) {
2421 STATE=rsti;
2422 SETPORT(SCSISEQ,0);
2423 SETPORT(SSTAT1,SCSIRSTI);
2424 } else if(stat0 & SELDI && PREVSTATE==busfree) {
2425 STATE=seldi;
2426 } else if(stat0 & SELDO && CURRENT_SC && (CURRENT_SC->SCp.phase & selecting)) {
2427 STATE=seldo;
2428 } else if(stat1 & SELTO) {
2429 STATE=selto;
2430 } else if(stat1 & BUSFREE) {
2431 STATE=busfree;
2432 SETPORT(SSTAT1,BUSFREE);
2433 } else if(stat1 & SCSIPERR) {
2434 STATE=parerr;
2435 SETPORT(SSTAT1,SCSIPERR);
2436 } else if(stat1 & REQINIT) {
2437 switch(GETPORT(SCSISIG) & P_MASK) {
2438 case P_MSGI: STATE=msgi; break;
2439 case P_MSGO: STATE=msgo; break;
2440 case P_DATAO: STATE=datao; break;
2441 case P_DATAI: STATE=datai; break;
2442 case P_STATUS: STATE=status; break;
2443 case P_CMD: STATE=cmd; break;
2444 }
2445 dataphase=1;
2446 }
2447
2448 if((stat0 & SELDI) && STATE!=seldi && !dataphase) {
2449 printk(INFO_LEAD "reselection missed?", CMDINFO(CURRENT_SC));
2450 disp_ports(shpnt);
2451 }
2452
2453 if(STATE!=PREVSTATE) {
2454 LASTSTATE=PREVSTATE;
2455 }
2456
2457 return dataphase;
2458}
2459
2460/*
2461 * handle parity error
2462 *
2463 * FIXME: in which phase?
2464 *
2465 */
2466static void parerr_run(struct Scsi_Host *shpnt)
2467{
2468 printk(ERR_LEAD "parity error\n", CMDINFO(CURRENT_SC));
2469 done(shpnt, DID_PARITY << 16);
2470}
2471
2472/*
2473 * handle reset in
2474 *
2475 */
2476static void rsti_run(struct Scsi_Host *shpnt)
2477{
2478 Scsi_Cmnd *ptr;
2479
2480 printk(KERN_NOTICE "aha152x%d: scsi reset in\n", HOSTNO);
2481
2482 ptr=DISCONNECTED_SC;
2483 while(ptr) {
2484 Scsi_Cmnd *next = SCNEXT(ptr);
2485
2486 if (!ptr->device->soft_reset) {
2487 remove_SC(&DISCONNECTED_SC, ptr);
2488
2489 kfree(ptr->host_scribble);
2490 ptr->host_scribble=NULL;
2491
2492 ptr->result = DID_RESET << 16;
2493 ptr->scsi_done(ptr);
2494 }
2495
2496 ptr = next;
2497 }
2498
2499 if(CURRENT_SC && !CURRENT_SC->device->soft_reset)
2500 done(shpnt, DID_RESET << 16 );
2501}
2502
2503
2504/*
2505 * bottom-half handler
2506 *
2507 */
2508static void is_complete(struct Scsi_Host *shpnt)
2509{
2510 int dataphase;
2511 unsigned long flags;
2512 int pending;
2513
2514 if(!shpnt)
2515 return;
2516
2517 DO_LOCK(flags);
2518
2519 if( HOSTDATA(shpnt)->service==0 ) {
2520 DO_UNLOCK(flags);
2521 return;
2522 }
2523
2524 HOSTDATA(shpnt)->service = 0;
2525
2526 if(HOSTDATA(shpnt)->in_intr) {
2527 DO_UNLOCK(flags);
2528 /* aha152x_error never returns.. */
2529 aha152x_error(shpnt, "bottom-half already running!?");
2530 }
2531 HOSTDATA(shpnt)->in_intr++;
2532
2533 /*
2534 * loop while there are interrupt conditions pending
2535 *
2536 */
2537 do {
2538 unsigned long start = jiffies;
2539 DO_UNLOCK(flags);
2540
2541 dataphase=update_state(shpnt);
2542
2543 DPRINTK(debug_phases, LEAD "start %s %s(%s)\n", CMDINFO(CURRENT_SC), states[STATE].name, states[PREVSTATE].name, states[LASTSTATE].name);
2544
2545 /*
2546 * end previous state
2547 *
2548 */
2549 if(PREVSTATE!=STATE && states[PREVSTATE].end)
2550 states[PREVSTATE].end(shpnt);
2551
2552 /*
2553 * disable SPIO mode if previous phase used it
2554 * and this one doesn't
2555 *
2556 */
2557 if(states[PREVSTATE].spio && !states[STATE].spio) {
2558 SETPORT(SXFRCTL0, CH1);
2559 SETPORT(DMACNTRL0, 0);
2560 if(CURRENT_SC)
2561 CURRENT_SC->SCp.phase &= ~spiordy;
2562 }
2563
2564 /*
2565 * accept current dataphase phase
2566 *
2567 */
2568 if(dataphase) {
2569 SETPORT(SSTAT0, REQINIT);
2570 SETPORT(SCSISIG, GETPORT(SCSISIG) & P_MASK);
2571 SETPORT(SSTAT1, PHASECHG);
2572 }
2573
2574 /*
2575 * enable SPIO mode if previous didn't use it
2576 * and this one does
2577 *
2578 */
2579 if(!states[PREVSTATE].spio && states[STATE].spio) {
2580 SETPORT(DMACNTRL0, 0);
2581 SETPORT(SXFRCTL0, CH1|SPIOEN);
2582 if(CURRENT_SC)
2583 CURRENT_SC->SCp.phase |= spiordy;
2584 }
2585
2586 /*
2587 * initialize for new state
2588 *
2589 */
2590 if(PREVSTATE!=STATE && states[STATE].init)
2591 states[STATE].init(shpnt);
2592
2593 /*
2594 * handle current state
2595 *
2596 */
2597 if(states[STATE].run)
2598 states[STATE].run(shpnt);
2599 else
2600 printk(ERR_LEAD "unexpected state (%x)\n", CMDINFO(CURRENT_SC), STATE);
2601
2602 /*
2603 * setup controller to interrupt on
2604 * the next expected condition and
2605 * loop if it's already there
2606 *
2607 */
2608 DO_LOCK(flags);
2609 pending=setup_expected_interrupts(shpnt);
2610#if defined(AHA152X_STAT)
2611 HOSTDATA(shpnt)->count[STATE]++;
2612 if(PREVSTATE!=STATE)
2613 HOSTDATA(shpnt)->count_trans[STATE]++;
2614 HOSTDATA(shpnt)->time[STATE] += jiffies-start;
2615#endif
2616
2617 DPRINTK(debug_phases, LEAD "end %s %s(%s)\n", CMDINFO(CURRENT_SC), states[STATE].name, states[PREVSTATE].name, states[LASTSTATE].name);
2618 } while(pending);
2619
2620 /*
2621 * enable interrupts and leave bottom-half
2622 *
2623 */
2624 HOSTDATA(shpnt)->in_intr--;
2625 SETBITS(DMACNTRL0, INTEN);
2626 DO_UNLOCK(flags);
2627}
2628
2629
2630/*
2631 * Dump the current driver status and panic
2632 */
2633static void aha152x_error(struct Scsi_Host *shpnt, char *msg)
2634{
2635 printk(KERN_EMERG "\naha152x%d: %s\n", HOSTNO, msg);
2636 show_queues(shpnt);
2637 panic("aha152x panic\n");
2638}
2639
2640/*
2641 * Display registers of AIC-6260
2642 */
2643static void disp_ports(struct Scsi_Host *shpnt)
2644{
2645#if defined(AHA152X_DEBUG)
2646 int s;
2647
2648 printk("\n%s: %s(%s) ",
2649 CURRENT_SC ? "busy" : "waiting",
2650 states[STATE].name,
2651 states[PREVSTATE].name);
2652
2653 s = GETPORT(SCSISEQ);
2654 printk("SCSISEQ( ");
2655 if (s & TEMODEO)
2656 printk("TARGET MODE ");
2657 if (s & ENSELO)
2658 printk("SELO ");
2659 if (s & ENSELI)
2660 printk("SELI ");
2661 if (s & ENRESELI)
2662 printk("RESELI ");
2663 if (s & ENAUTOATNO)
2664 printk("AUTOATNO ");
2665 if (s & ENAUTOATNI)
2666 printk("AUTOATNI ");
2667 if (s & ENAUTOATNP)
2668 printk("AUTOATNP ");
2669 if (s & SCSIRSTO)
2670 printk("SCSIRSTO ");
2671 printk(");");
2672
2673 printk(" SCSISIG(");
2674 s = GETPORT(SCSISIG);
2675 switch (s & P_MASK) {
2676 case P_DATAO:
2677 printk("DATA OUT");
2678 break;
2679 case P_DATAI:
2680 printk("DATA IN");
2681 break;
2682 case P_CMD:
2683 printk("COMMAND");
2684 break;
2685 case P_STATUS:
2686 printk("STATUS");
2687 break;
2688 case P_MSGO:
2689 printk("MESSAGE OUT");
2690 break;
2691 case P_MSGI:
2692 printk("MESSAGE IN");
2693 break;
2694 default:
2695 printk("*invalid*");
2696 break;
2697 }
2698
2699 printk("); ");
2700
2701 printk("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
2702
2703 printk("SSTAT( ");
2704 s = GETPORT(SSTAT0);
2705 if (s & TARGET)
2706 printk("TARGET ");
2707 if (s & SELDO)
2708 printk("SELDO ");
2709 if (s & SELDI)
2710 printk("SELDI ");
2711 if (s & SELINGO)
2712 printk("SELINGO ");
2713 if (s & SWRAP)
2714 printk("SWRAP ");
2715 if (s & SDONE)
2716 printk("SDONE ");
2717 if (s & SPIORDY)
2718 printk("SPIORDY ");
2719 if (s & DMADONE)
2720 printk("DMADONE ");
2721
2722 s = GETPORT(SSTAT1);
2723 if (s & SELTO)
2724 printk("SELTO ");
2725 if (s & ATNTARG)
2726 printk("ATNTARG ");
2727 if (s & SCSIRSTI)
2728 printk("SCSIRSTI ");
2729 if (s & PHASEMIS)
2730 printk("PHASEMIS ");
2731 if (s & BUSFREE)
2732 printk("BUSFREE ");
2733 if (s & SCSIPERR)
2734 printk("SCSIPERR ");
2735 if (s & PHASECHG)
2736 printk("PHASECHG ");
2737 if (s & REQINIT)
2738 printk("REQINIT ");
2739 printk("); ");
2740
2741
2742 printk("SSTAT( ");
2743
2744 s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
2745
2746 if (s & TARGET)
2747 printk("TARGET ");
2748 if (s & SELDO)
2749 printk("SELDO ");
2750 if (s & SELDI)
2751 printk("SELDI ");
2752 if (s & SELINGO)
2753 printk("SELINGO ");
2754 if (s & SWRAP)
2755 printk("SWRAP ");
2756 if (s & SDONE)
2757 printk("SDONE ");
2758 if (s & SPIORDY)
2759 printk("SPIORDY ");
2760 if (s & DMADONE)
2761 printk("DMADONE ");
2762
2763 s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
2764
2765 if (s & SELTO)
2766 printk("SELTO ");
2767 if (s & ATNTARG)
2768 printk("ATNTARG ");
2769 if (s & SCSIRSTI)
2770 printk("SCSIRSTI ");
2771 if (s & PHASEMIS)
2772 printk("PHASEMIS ");
2773 if (s & BUSFREE)
2774 printk("BUSFREE ");
2775 if (s & SCSIPERR)
2776 printk("SCSIPERR ");
2777 if (s & PHASECHG)
2778 printk("PHASECHG ");
2779 if (s & REQINIT)
2780 printk("REQINIT ");
2781 printk("); ");
2782
2783 printk("SXFRCTL0( ");
2784
2785 s = GETPORT(SXFRCTL0);
2786 if (s & SCSIEN)
2787 printk("SCSIEN ");
2788 if (s & DMAEN)
2789 printk("DMAEN ");
2790 if (s & CH1)
2791 printk("CH1 ");
2792 if (s & CLRSTCNT)
2793 printk("CLRSTCNT ");
2794 if (s & SPIOEN)
2795 printk("SPIOEN ");
2796 if (s & CLRCH1)
2797 printk("CLRCH1 ");
2798 printk("); ");
2799
2800 printk("SIGNAL( ");
2801
2802 s = GETPORT(SCSISIG);
2803 if (s & SIG_ATNI)
2804 printk("ATNI ");
2805 if (s & SIG_SELI)
2806 printk("SELI ");
2807 if (s & SIG_BSYI)
2808 printk("BSYI ");
2809 if (s & SIG_REQI)
2810 printk("REQI ");
2811 if (s & SIG_ACKI)
2812 printk("ACKI ");
2813 printk("); ");
2814
2815 printk("SELID (%02x), ", GETPORT(SELID));
2816
2817 printk("STCNT (%d), ", GETSTCNT());
2818
2819 printk("SSTAT2( ");
2820
2821 s = GETPORT(SSTAT2);
2822 if (s & SOFFSET)
2823 printk("SOFFSET ");
2824 if (s & SEMPTY)
2825 printk("SEMPTY ");
2826 if (s & SFULL)
2827 printk("SFULL ");
2828 printk("); SFCNT (%d); ", s & (SFULL | SFCNT));
2829
2830 s = GETPORT(SSTAT3);
2831 printk("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
2832
2833 printk("SSTAT4( ");
2834 s = GETPORT(SSTAT4);
2835 if (s & SYNCERR)
2836 printk("SYNCERR ");
2837 if (s & FWERR)
2838 printk("FWERR ");
2839 if (s & FRERR)
2840 printk("FRERR ");
2841 printk("); ");
2842
2843 printk("DMACNTRL0( ");
2844 s = GETPORT(DMACNTRL0);
2845 printk("%s ", s & _8BIT ? "8BIT" : "16BIT");
2846 printk("%s ", s & DMA ? "DMA" : "PIO");
2847 printk("%s ", s & WRITE_READ ? "WRITE" : "READ");
2848 if (s & ENDMA)
2849 printk("ENDMA ");
2850 if (s & INTEN)
2851 printk("INTEN ");
2852 if (s & RSTFIFO)
2853 printk("RSTFIFO ");
2854 if (s & SWINT)
2855 printk("SWINT ");
2856 printk("); ");
2857
2858 printk("DMASTAT( ");
2859 s = GETPORT(DMASTAT);
2860 if (s & ATDONE)
2861 printk("ATDONE ");
2862 if (s & WORDRDY)
2863 printk("WORDRDY ");
2864 if (s & DFIFOFULL)
2865 printk("DFIFOFULL ");
2866 if (s & DFIFOEMP)
2867 printk("DFIFOEMP ");
2868 printk(")\n");
2869#endif
2870}
2871
2872/*
2873 * display enabled interrupts
2874 */
2875static void disp_enintr(struct Scsi_Host *shpnt)
2876{
2877 int s;
2878
2879 printk(KERN_DEBUG "enabled interrupts ( ");
2880
2881 s = GETPORT(SIMODE0);
2882 if (s & ENSELDO)
2883 printk("ENSELDO ");
2884 if (s & ENSELDI)
2885 printk("ENSELDI ");
2886 if (s & ENSELINGO)
2887 printk("ENSELINGO ");
2888 if (s & ENSWRAP)
2889 printk("ENSWRAP ");
2890 if (s & ENSDONE)
2891 printk("ENSDONE ");
2892 if (s & ENSPIORDY)
2893 printk("ENSPIORDY ");
2894 if (s & ENDMADONE)
2895 printk("ENDMADONE ");
2896
2897 s = GETPORT(SIMODE1);
2898 if (s & ENSELTIMO)
2899 printk("ENSELTIMO ");
2900 if (s & ENATNTARG)
2901 printk("ENATNTARG ");
2902 if (s & ENPHASEMIS)
2903 printk("ENPHASEMIS ");
2904 if (s & ENBUSFREE)
2905 printk("ENBUSFREE ");
2906 if (s & ENSCSIPERR)
2907 printk("ENSCSIPERR ");
2908 if (s & ENPHASECHG)
2909 printk("ENPHASECHG ");
2910 if (s & ENREQINIT)
2911 printk("ENREQINIT ");
2912 printk(")\n");
2913}
2914
2915/*
2916 * Show the command data of a command
2917 */
2918static void show_command(Scsi_Cmnd *ptr)
2919{
2920 scmd_printk(KERN_DEBUG, ptr, "%p: cmnd=(", ptr);
2921
2922 __scsi_print_command(ptr->cmnd);
2923
2924 printk(KERN_DEBUG "); request_bufflen=%d; resid=%d; phase |",
2925 scsi_bufflen(ptr), scsi_get_resid(ptr));
2926
2927 if (ptr->SCp.phase & not_issued)
2928 printk("not issued|");
2929 if (ptr->SCp.phase & selecting)
2930 printk("selecting|");
2931 if (ptr->SCp.phase & identified)
2932 printk("identified|");
2933 if (ptr->SCp.phase & disconnected)
2934 printk("disconnected|");
2935 if (ptr->SCp.phase & completed)
2936 printk("completed|");
2937 if (ptr->SCp.phase & spiordy)
2938 printk("spiordy|");
2939 if (ptr->SCp.phase & syncneg)
2940 printk("syncneg|");
2941 if (ptr->SCp.phase & aborted)
2942 printk("aborted|");
2943 if (ptr->SCp.phase & resetted)
2944 printk("resetted|");
2945 if( SCDATA(ptr) ) {
2946 printk("; next=0x%p\n", SCNEXT(ptr));
2947 } else {
2948 printk("; next=(host scribble NULL)\n");
2949 }
2950}
2951
2952/*
2953 * Dump the queued data
2954 */
2955static void show_queues(struct Scsi_Host *shpnt)
2956{
2957 Scsi_Cmnd *ptr;
2958 unsigned long flags;
2959
2960 DO_LOCK(flags);
2961 printk(KERN_DEBUG "\nqueue status:\nissue_SC:\n");
2962 for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
2963 show_command(ptr);
2964 DO_UNLOCK(flags);
2965
2966 printk(KERN_DEBUG "current_SC:\n");
2967 if (CURRENT_SC)
2968 show_command(CURRENT_SC);
2969 else
2970 printk(KERN_DEBUG "none\n");
2971
2972 printk(KERN_DEBUG "disconnected_SC:\n");
2973 for (ptr = DISCONNECTED_SC; ptr; ptr = SCDATA(ptr) ? SCNEXT(ptr) : NULL)
2974 show_command(ptr);
2975
2976 disp_ports(shpnt);
2977 disp_enintr(shpnt);
2978}
2979
2980#undef SPRINTF
2981#define SPRINTF(args...) pos += sprintf(pos, ## args)
2982
2983static int get_command(char *pos, Scsi_Cmnd * ptr)
2984{
2985 char *start = pos;
2986 int i;
2987
2988 SPRINTF("0x%08x: target=%d; lun=%d; cmnd=( ",
2989 (unsigned int) ptr, ptr->device->id, ptr->device->lun);
2990
2991 for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
2992 SPRINTF("0x%02x ", ptr->cmnd[i]);
2993
2994 SPRINTF("); resid=%d; residual=%d; buffers=%d; phase |",
2995 scsi_get_resid(ptr), ptr->SCp.this_residual,
2996 ptr->SCp.buffers_residual);
2997
2998 if (ptr->SCp.phase & not_issued)
2999 SPRINTF("not issued|");
3000 if (ptr->SCp.phase & selecting)
3001 SPRINTF("selecting|");
3002 if (ptr->SCp.phase & disconnected)
3003 SPRINTF("disconnected|");
3004 if (ptr->SCp.phase & aborted)
3005 SPRINTF("aborted|");
3006 if (ptr->SCp.phase & identified)
3007 SPRINTF("identified|");
3008 if (ptr->SCp.phase & completed)
3009 SPRINTF("completed|");
3010 if (ptr->SCp.phase & spiordy)
3011 SPRINTF("spiordy|");
3012 if (ptr->SCp.phase & syncneg)
3013 SPRINTF("syncneg|");
3014 SPRINTF("; next=0x%p\n", SCNEXT(ptr));
3015
3016 return (pos - start);
3017}
3018
3019static int get_ports(struct Scsi_Host *shpnt, char *pos)
3020{
3021 char *start = pos;
3022 int s;
3023
3024 SPRINTF("\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
3025
3026 s = GETPORT(SCSISEQ);
3027 SPRINTF("SCSISEQ( ");
3028 if (s & TEMODEO)
3029 SPRINTF("TARGET MODE ");
3030 if (s & ENSELO)
3031 SPRINTF("SELO ");
3032 if (s & ENSELI)
3033 SPRINTF("SELI ");
3034 if (s & ENRESELI)
3035 SPRINTF("RESELI ");
3036 if (s & ENAUTOATNO)
3037 SPRINTF("AUTOATNO ");
3038 if (s & ENAUTOATNI)
3039 SPRINTF("AUTOATNI ");
3040 if (s & ENAUTOATNP)
3041 SPRINTF("AUTOATNP ");
3042 if (s & SCSIRSTO)
3043 SPRINTF("SCSIRSTO ");
3044 SPRINTF(");");
3045
3046 SPRINTF(" SCSISIG(");
3047 s = GETPORT(SCSISIG);
3048 switch (s & P_MASK) {
3049 case P_DATAO:
3050 SPRINTF("DATA OUT");
3051 break;
3052 case P_DATAI:
3053 SPRINTF("DATA IN");
3054 break;
3055 case P_CMD:
3056 SPRINTF("COMMAND");
3057 break;
3058 case P_STATUS:
3059 SPRINTF("STATUS");
3060 break;
3061 case P_MSGO:
3062 SPRINTF("MESSAGE OUT");
3063 break;
3064 case P_MSGI:
3065 SPRINTF("MESSAGE IN");
3066 break;
3067 default:
3068 SPRINTF("*invalid*");
3069 break;
3070 }
3071
3072 SPRINTF("); ");
3073
3074 SPRINTF("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
3075
3076 SPRINTF("SSTAT( ");
3077 s = GETPORT(SSTAT0);
3078 if (s & TARGET)
3079 SPRINTF("TARGET ");
3080 if (s & SELDO)
3081 SPRINTF("SELDO ");
3082 if (s & SELDI)
3083 SPRINTF("SELDI ");
3084 if (s & SELINGO)
3085 SPRINTF("SELINGO ");
3086 if (s & SWRAP)
3087 SPRINTF("SWRAP ");
3088 if (s & SDONE)
3089 SPRINTF("SDONE ");
3090 if (s & SPIORDY)
3091 SPRINTF("SPIORDY ");
3092 if (s & DMADONE)
3093 SPRINTF("DMADONE ");
3094
3095 s = GETPORT(SSTAT1);
3096 if (s & SELTO)
3097 SPRINTF("SELTO ");
3098 if (s & ATNTARG)
3099 SPRINTF("ATNTARG ");
3100 if (s & SCSIRSTI)
3101 SPRINTF("SCSIRSTI ");
3102 if (s & PHASEMIS)
3103 SPRINTF("PHASEMIS ");
3104 if (s & BUSFREE)
3105 SPRINTF("BUSFREE ");
3106 if (s & SCSIPERR)
3107 SPRINTF("SCSIPERR ");
3108 if (s & PHASECHG)
3109 SPRINTF("PHASECHG ");
3110 if (s & REQINIT)
3111 SPRINTF("REQINIT ");
3112 SPRINTF("); ");
3113
3114
3115 SPRINTF("SSTAT( ");
3116
3117 s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
3118
3119 if (s & TARGET)
3120 SPRINTF("TARGET ");
3121 if (s & SELDO)
3122 SPRINTF("SELDO ");
3123 if (s & SELDI)
3124 SPRINTF("SELDI ");
3125 if (s & SELINGO)
3126 SPRINTF("SELINGO ");
3127 if (s & SWRAP)
3128 SPRINTF("SWRAP ");
3129 if (s & SDONE)
3130 SPRINTF("SDONE ");
3131 if (s & SPIORDY)
3132 SPRINTF("SPIORDY ");
3133 if (s & DMADONE)
3134 SPRINTF("DMADONE ");
3135
3136 s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
3137
3138 if (s & SELTO)
3139 SPRINTF("SELTO ");
3140 if (s & ATNTARG)
3141 SPRINTF("ATNTARG ");
3142 if (s & SCSIRSTI)
3143 SPRINTF("SCSIRSTI ");
3144 if (s & PHASEMIS)
3145 SPRINTF("PHASEMIS ");
3146 if (s & BUSFREE)
3147 SPRINTF("BUSFREE ");
3148 if (s & SCSIPERR)
3149 SPRINTF("SCSIPERR ");
3150 if (s & PHASECHG)
3151 SPRINTF("PHASECHG ");
3152 if (s & REQINIT)
3153 SPRINTF("REQINIT ");
3154 SPRINTF("); ");
3155
3156 SPRINTF("SXFRCTL0( ");
3157
3158 s = GETPORT(SXFRCTL0);
3159 if (s & SCSIEN)
3160 SPRINTF("SCSIEN ");
3161 if (s & DMAEN)
3162 SPRINTF("DMAEN ");
3163 if (s & CH1)
3164 SPRINTF("CH1 ");
3165 if (s & CLRSTCNT)
3166 SPRINTF("CLRSTCNT ");
3167 if (s & SPIOEN)
3168 SPRINTF("SPIOEN ");
3169 if (s & CLRCH1)
3170 SPRINTF("CLRCH1 ");
3171 SPRINTF("); ");
3172
3173 SPRINTF("SIGNAL( ");
3174
3175 s = GETPORT(SCSISIG);
3176 if (s & SIG_ATNI)
3177 SPRINTF("ATNI ");
3178 if (s & SIG_SELI)
3179 SPRINTF("SELI ");
3180 if (s & SIG_BSYI)
3181 SPRINTF("BSYI ");
3182 if (s & SIG_REQI)
3183 SPRINTF("REQI ");
3184 if (s & SIG_ACKI)
3185 SPRINTF("ACKI ");
3186 SPRINTF("); ");
3187
3188 SPRINTF("SELID(%02x), ", GETPORT(SELID));
3189
3190 SPRINTF("STCNT(%d), ", GETSTCNT());
3191
3192 SPRINTF("SSTAT2( ");
3193
3194 s = GETPORT(SSTAT2);
3195 if (s & SOFFSET)
3196 SPRINTF("SOFFSET ");
3197 if (s & SEMPTY)
3198 SPRINTF("SEMPTY ");
3199 if (s & SFULL)
3200 SPRINTF("SFULL ");
3201 SPRINTF("); SFCNT (%d); ", s & (SFULL | SFCNT));
3202
3203 s = GETPORT(SSTAT3);
3204 SPRINTF("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
3205
3206 SPRINTF("SSTAT4( ");
3207 s = GETPORT(SSTAT4);
3208 if (s & SYNCERR)
3209 SPRINTF("SYNCERR ");
3210 if (s & FWERR)
3211 SPRINTF("FWERR ");
3212 if (s & FRERR)
3213 SPRINTF("FRERR ");
3214 SPRINTF("); ");
3215
3216 SPRINTF("DMACNTRL0( ");
3217 s = GETPORT(DMACNTRL0);
3218 SPRINTF("%s ", s & _8BIT ? "8BIT" : "16BIT");
3219 SPRINTF("%s ", s & DMA ? "DMA" : "PIO");
3220 SPRINTF("%s ", s & WRITE_READ ? "WRITE" : "READ");
3221 if (s & ENDMA)
3222 SPRINTF("ENDMA ");
3223 if (s & INTEN)
3224 SPRINTF("INTEN ");
3225 if (s & RSTFIFO)
3226 SPRINTF("RSTFIFO ");
3227 if (s & SWINT)
3228 SPRINTF("SWINT ");
3229 SPRINTF("); ");
3230
3231 SPRINTF("DMASTAT( ");
3232 s = GETPORT(DMASTAT);
3233 if (s & ATDONE)
3234 SPRINTF("ATDONE ");
3235 if (s & WORDRDY)
3236 SPRINTF("WORDRDY ");
3237 if (s & DFIFOFULL)
3238 SPRINTF("DFIFOFULL ");
3239 if (s & DFIFOEMP)
3240 SPRINTF("DFIFOEMP ");
3241 SPRINTF(")\n");
3242
3243 SPRINTF("enabled interrupts( ");
3244
3245 s = GETPORT(SIMODE0);
3246 if (s & ENSELDO)
3247 SPRINTF("ENSELDO ");
3248 if (s & ENSELDI)
3249 SPRINTF("ENSELDI ");
3250 if (s & ENSELINGO)
3251 SPRINTF("ENSELINGO ");
3252 if (s & ENSWRAP)
3253 SPRINTF("ENSWRAP ");
3254 if (s & ENSDONE)
3255 SPRINTF("ENSDONE ");
3256 if (s & ENSPIORDY)
3257 SPRINTF("ENSPIORDY ");
3258 if (s & ENDMADONE)
3259 SPRINTF("ENDMADONE ");
3260
3261 s = GETPORT(SIMODE1);
3262 if (s & ENSELTIMO)
3263 SPRINTF("ENSELTIMO ");
3264 if (s & ENATNTARG)
3265 SPRINTF("ENATNTARG ");
3266 if (s & ENPHASEMIS)
3267 SPRINTF("ENPHASEMIS ");
3268 if (s & ENBUSFREE)
3269 SPRINTF("ENBUSFREE ");
3270 if (s & ENSCSIPERR)
3271 SPRINTF("ENSCSIPERR ");
3272 if (s & ENPHASECHG)
3273 SPRINTF("ENPHASECHG ");
3274 if (s & ENREQINIT)
3275 SPRINTF("ENREQINIT ");
3276 SPRINTF(")\n");
3277
3278 return (pos - start);
3279}
3280
3281static int aha152x_set_info(char *buffer, int length, struct Scsi_Host *shpnt)
3282{
3283 if(!shpnt || !buffer || length<8 || strncmp("aha152x ", buffer, 8)!=0)
3284 return -EINVAL;
3285
3286#if defined(AHA152X_DEBUG)
3287 if(length>14 && strncmp("debug ", buffer+8, 6)==0) {
3288 int debug = HOSTDATA(shpnt)->debug;
3289
3290 HOSTDATA(shpnt)->debug = simple_strtoul(buffer+14, NULL, 0);
3291
3292 printk(KERN_INFO "aha152x%d: debugging options set to 0x%04x (were 0x%04x)\n", HOSTNO, HOSTDATA(shpnt)->debug, debug);
3293 } else
3294#endif
3295#if defined(AHA152X_STAT)
3296 if(length>13 && strncmp("reset", buffer+8, 5)==0) {
3297 int i;
3298
3299 HOSTDATA(shpnt)->total_commands=0;
3300 HOSTDATA(shpnt)->disconnections=0;
3301 HOSTDATA(shpnt)->busfree_without_any_action=0;
3302 HOSTDATA(shpnt)->busfree_without_old_command=0;
3303 HOSTDATA(shpnt)->busfree_without_new_command=0;
3304 HOSTDATA(shpnt)->busfree_without_done_command=0;
3305 HOSTDATA(shpnt)->busfree_with_check_condition=0;
3306 for (i = idle; i<maxstate; i++) {
3307 HOSTDATA(shpnt)->count[i]=0;
3308 HOSTDATA(shpnt)->count_trans[i]=0;
3309 HOSTDATA(shpnt)->time[i]=0;
3310 }
3311
3312 printk(KERN_INFO "aha152x%d: stats reseted.\n", HOSTNO);
3313
3314 } else
3315#endif
3316 {
3317 return -EINVAL;
3318 }
3319
3320
3321 return length;
3322}
3323
3324#undef SPRINTF
3325#define SPRINTF(args...) \
3326 do { if(pos < buffer + length) pos += sprintf(pos, ## args); } while(0)
3327
3328static int aha152x_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start,
3329 off_t offset, int length, int inout)
3330{
3331 int i;
3332 char *pos = buffer;
3333 Scsi_Cmnd *ptr;
3334 unsigned long flags;
3335 int thislength;
3336
3337 DPRINTK(debug_procinfo,
3338 KERN_DEBUG "aha152x_proc_info: buffer=%p offset=%ld length=%d hostno=%d inout=%d\n",
3339 buffer, offset, length, shpnt->host_no, inout);
3340
3341
3342 if (inout)
3343 return aha152x_set_info(buffer, length, shpnt);
3344
3345 SPRINTF(AHA152X_REVID "\n");
3346
3347 SPRINTF("ioports 0x%04lx to 0x%04lx\n",
3348 shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
3349 SPRINTF("interrupt 0x%02x\n", shpnt->irq);
3350 SPRINTF("disconnection/reconnection %s\n",
3351 RECONNECT ? "enabled" : "disabled");
3352 SPRINTF("parity checking %s\n",
3353 PARITY ? "enabled" : "disabled");
3354 SPRINTF("synchronous transfers %s\n",
3355 SYNCHRONOUS ? "enabled" : "disabled");
3356 SPRINTF("%d commands currently queued\n", HOSTDATA(shpnt)->commands);
3357
3358 if(SYNCHRONOUS) {
3359 SPRINTF("synchronously operating targets (tick=50 ns):\n");
3360 for (i = 0; i < 8; i++)
3361 if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
3362 SPRINTF("target %d: period %dT/%dns; req/ack offset %d\n",
3363 i,
3364 (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2),
3365 (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
3366 HOSTDATA(shpnt)->syncrate[i] & 0x0f);
3367 }
3368#if defined(AHA152X_DEBUG)
3369#define PDEBUG(flags,txt) \
3370 if(HOSTDATA(shpnt)->debug & flags) SPRINTF("(%s) ", txt);
3371
3372 SPRINTF("enabled debugging options: ");
3373
3374 PDEBUG(debug_procinfo, "procinfo");
3375 PDEBUG(debug_queue, "queue");
3376 PDEBUG(debug_intr, "interrupt");
3377 PDEBUG(debug_selection, "selection");
3378 PDEBUG(debug_msgo, "message out");
3379 PDEBUG(debug_msgi, "message in");
3380 PDEBUG(debug_status, "status");
3381 PDEBUG(debug_cmd, "command");
3382 PDEBUG(debug_datai, "data in");
3383 PDEBUG(debug_datao, "data out");
3384 PDEBUG(debug_eh, "eh");
3385 PDEBUG(debug_locking, "locks");
3386 PDEBUG(debug_phases, "phases");
3387
3388 SPRINTF("\n");
3389#endif
3390
3391 SPRINTF("\nqueue status:\n");
3392 DO_LOCK(flags);
3393 if (ISSUE_SC) {
3394 SPRINTF("not yet issued commands:\n");
3395 for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
3396 pos += get_command(pos, ptr);
3397 } else
3398 SPRINTF("no not yet issued commands\n");
3399 DO_UNLOCK(flags);
3400
3401 if (CURRENT_SC) {
3402 SPRINTF("current command:\n");
3403 pos += get_command(pos, CURRENT_SC);
3404 } else
3405 SPRINTF("no current command\n");
3406
3407 if (DISCONNECTED_SC) {
3408 SPRINTF("disconnected commands:\n");
3409 for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
3410 pos += get_command(pos, ptr);
3411 } else
3412 SPRINTF("no disconnected commands\n");
3413
3414 pos += get_ports(shpnt, pos);
3415
3416#if defined(AHA152X_STAT)
3417 SPRINTF("statistics:\n"
3418 "total commands: %d\n"
3419 "disconnections: %d\n"
3420 "busfree with check condition: %d\n"
3421 "busfree without old command: %d\n"
3422 "busfree without new command: %d\n"
3423 "busfree without done command: %d\n"
3424 "busfree without any action: %d\n"
3425 "state "
3426 "transitions "
3427 "count "
3428 "time\n",
3429 HOSTDATA(shpnt)->total_commands,
3430 HOSTDATA(shpnt)->disconnections,
3431 HOSTDATA(shpnt)->busfree_with_check_condition,
3432 HOSTDATA(shpnt)->busfree_without_old_command,
3433 HOSTDATA(shpnt)->busfree_without_new_command,
3434 HOSTDATA(shpnt)->busfree_without_done_command,
3435 HOSTDATA(shpnt)->busfree_without_any_action);
3436 for(i=0; i<maxstate; i++) {
3437 SPRINTF("%-10s %-12d %-12d %-12ld\n",
3438 states[i].name,
3439 HOSTDATA(shpnt)->count_trans[i],
3440 HOSTDATA(shpnt)->count[i],
3441 HOSTDATA(shpnt)->time[i]);
3442 }
3443#endif
3444
3445 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: pos=%p\n", pos);
3446
3447 thislength = pos - (buffer + offset);
3448 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: length=%d thislength=%d\n", length, thislength);
3449
3450 if(thislength<0) {
3451 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: output too short\n");
3452 *start = NULL;
3453 return 0;
3454 }
3455
3456 thislength = thislength<length ? thislength : length;
3457
3458 DPRINTK(debug_procinfo, KERN_DEBUG "aha152x_proc_info: return %d\n", thislength);
3459
3460 *start = buffer + offset;
3461 return thislength < length ? thislength : length;
3462}
3463
3464static int aha152x_adjust_queue(struct scsi_device *device)
3465{
3466 blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
3467 return 0;
3468}
3469
3470static struct scsi_host_template aha152x_driver_template = {
3471 .module = THIS_MODULE,
3472 .name = AHA152X_REVID,
3473 .proc_name = "aha152x",
3474 .proc_info = aha152x_proc_info,
3475 .queuecommand = aha152x_queue,
3476 .eh_abort_handler = aha152x_abort,
3477 .eh_device_reset_handler = aha152x_device_reset,
3478 .eh_bus_reset_handler = aha152x_bus_reset,
3479 .eh_host_reset_handler = aha152x_host_reset,
3480 .bios_param = aha152x_biosparam,
3481 .can_queue = 1,
3482 .this_id = 7,
3483 .sg_tablesize = SG_ALL,
3484 .cmd_per_lun = 1,
3485 .use_clustering = DISABLE_CLUSTERING,
3486 .slave_alloc = aha152x_adjust_queue,
3487};
3488
3489#if !defined(PCMCIA)
3490static int setup_count;
3491static struct aha152x_setup setup[2];
3492
3493/* possible i/o addresses for the AIC-6260; default first */
3494static unsigned short ports[] = { 0x340, 0x140 };
3495
3496#if !defined(SKIP_BIOSTEST)
3497/* possible locations for the Adaptec BIOS; defaults first */
3498static unsigned int addresses[] =
3499{
3500 0xdc000, /* default first */
3501 0xc8000,
3502 0xcc000,
3503 0xd0000,
3504 0xd4000,
3505 0xd8000,
3506 0xe0000,
3507 0xeb800, /* VTech Platinum SMP */
3508 0xf0000,
3509};
3510
3511/* signatures for various AIC-6[23]60 based controllers.
3512 The point in detecting signatures is to avoid useless and maybe
3513 harmful probes on ports. I'm not sure that all listed boards pass
3514 auto-configuration. For those which fail the BIOS signature is
3515 obsolete, because user intervention to supply the configuration is
3516 needed anyway. May be an information whether or not the BIOS supports
3517 extended translation could be also useful here. */
3518static struct signature {
3519 unsigned char *signature;
3520 int sig_offset;
3521 int sig_length;
3522} signatures[] =
3523{
3524 { "Adaptec AHA-1520 BIOS", 0x102e, 21 },
3525 /* Adaptec 152x */
3526 { "Adaptec AHA-1520B", 0x000b, 17 },
3527 /* Adaptec 152x rev B */
3528 { "Adaptec AHA-1520B", 0x0026, 17 },
3529 /* Iomega Jaz Jet ISA (AIC6370Q) */
3530 { "Adaptec ASW-B626 BIOS", 0x1029, 21 },
3531 /* on-board controller */
3532 { "Adaptec BIOS: ASW-B626", 0x000f, 22 },
3533 /* on-board controller */
3534 { "Adaptec ASW-B626 S2", 0x2e6c, 19 },
3535 /* on-board controller */
3536 { "Adaptec BIOS:AIC-6360", 0x000c, 21 },
3537 /* on-board controller */
3538 { "ScsiPro SP-360 BIOS", 0x2873, 19 },
3539 /* ScsiPro-Controller */
3540 { "GA-400 LOCAL BUS SCSI BIOS", 0x102e, 26 },
3541 /* Gigabyte Local-Bus-SCSI */
3542 { "Adaptec BIOS:AVA-282X", 0x000c, 21 },
3543 /* Adaptec 282x */
3544 { "Adaptec IBM Dock II SCSI", 0x2edd, 24 },
3545 /* IBM Thinkpad Dock II */
3546 { "Adaptec BIOS:AHA-1532P", 0x001c, 22 },
3547 /* IBM Thinkpad Dock II SCSI */
3548 { "DTC3520A Host Adapter BIOS", 0x318a, 26 },
3549 /* DTC 3520A ISA SCSI */
3550};
3551#endif /* !SKIP_BIOSTEST */
3552
3553/*
3554 * Test, if port_base is valid.
3555 *
3556 */
3557static int aha152x_porttest(int io_port)
3558{
3559 int i;
3560
3561 SETPORT(io_port + O_DMACNTRL1, 0); /* reset stack pointer */
3562 for (i = 0; i < 16; i++)
3563 SETPORT(io_port + O_STACK, i);
3564
3565 SETPORT(io_port + O_DMACNTRL1, 0); /* reset stack pointer */
3566 for (i = 0; i < 16 && GETPORT(io_port + O_STACK) == i; i++)
3567 ;
3568
3569 return (i == 16);
3570}
3571
3572static int tc1550_porttest(int io_port)
3573{
3574 int i;
3575
3576 SETPORT(io_port + O_TC_DMACNTRL1, 0); /* reset stack pointer */
3577 for (i = 0; i < 16; i++)
3578 SETPORT(io_port + O_STACK, i);
3579
3580 SETPORT(io_port + O_TC_DMACNTRL1, 0); /* reset stack pointer */
3581 for (i = 0; i < 16 && GETPORT(io_port + O_TC_STACK) == i; i++)
3582 ;
3583
3584 return (i == 16);
3585}
3586
3587
3588static int checksetup(struct aha152x_setup *setup)
3589{
3590 int i;
3591 for (i = 0; i < ARRAY_SIZE(ports) && (setup->io_port != ports[i]); i++)
3592 ;
3593
3594 if (i == ARRAY_SIZE(ports))
3595 return 0;
3596
3597 if (!request_region(setup->io_port, IO_RANGE, "aha152x")) {
3598 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
3599 return 0;
3600 }
3601
3602 if( aha152x_porttest(setup->io_port) ) {
3603 setup->tc1550=0;
3604 } else if( tc1550_porttest(setup->io_port) ) {
3605 setup->tc1550=1;
3606 } else {
3607 release_region(setup->io_port, IO_RANGE);
3608 return 0;
3609 }
3610
3611 release_region(setup->io_port, IO_RANGE);
3612
3613 if ((setup->irq < IRQ_MIN) || (setup->irq > IRQ_MAX))
3614 return 0;
3615
3616 if ((setup->scsiid < 0) || (setup->scsiid > 7))
3617 return 0;
3618
3619 if ((setup->reconnect < 0) || (setup->reconnect > 1))
3620 return 0;
3621
3622 if ((setup->parity < 0) || (setup->parity > 1))
3623 return 0;
3624
3625 if ((setup->synchronous < 0) || (setup->synchronous > 1))
3626 return 0;
3627
3628 if ((setup->ext_trans < 0) || (setup->ext_trans > 1))
3629 return 0;
3630
3631
3632 return 1;
3633}
3634
3635
3636static int __init aha152x_init(void)
3637{
3638 int i, j, ok;
3639#if defined(AUTOCONF)
3640 aha152x_config conf;
3641#endif
3642#ifdef __ISAPNP__
3643 struct pnp_dev *dev=NULL, *pnpdev[2] = {NULL, NULL};
3644#endif
3645
3646 if ( setup_count ) {
3647 printk(KERN_INFO "aha152x: processing commandline: ");
3648
3649 for (i = 0; i<setup_count; i++) {
3650 if (!checksetup(&setup[i])) {
3651 printk(KERN_ERR "\naha152x: %s\n", setup[i].conf);
3652 printk(KERN_ERR "aha152x: invalid line\n");
3653 }
3654 }
3655 printk("ok\n");
3656 }
3657
3658#if defined(SETUP0)
3659 if (setup_count < ARRAY_SIZE(setup)) {
3660 struct aha152x_setup override = SETUP0;
3661
3662 if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
3663 if (!checksetup(&override)) {
3664 printk(KERN_ERR "\naha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
3665 override.io_port,
3666 override.irq,
3667 override.scsiid,
3668 override.reconnect,
3669 override.parity,
3670 override.synchronous,
3671 override.delay,
3672 override.ext_trans);
3673 } else
3674 setup[setup_count++] = override;
3675 }
3676 }
3677#endif
3678
3679#if defined(SETUP1)
3680 if (setup_count < ARRAY_SIZE(setup)) {
3681 struct aha152x_setup override = SETUP1;
3682
3683 if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
3684 if (!checksetup(&override)) {
3685 printk(KERN_ERR "\naha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
3686 override.io_port,
3687 override.irq,
3688 override.scsiid,
3689 override.reconnect,
3690 override.parity,
3691 override.synchronous,
3692 override.delay,
3693 override.ext_trans);
3694 } else
3695 setup[setup_count++] = override;
3696 }
3697 }
3698#endif
3699
3700#if defined(MODULE)
3701 if (setup_count<ARRAY_SIZE(setup) && (aha152x[0]!=0 || io[0]!=0 || irq[0]!=0)) {
3702 if(aha152x[0]!=0) {
3703 setup[setup_count].conf = "";
3704 setup[setup_count].io_port = aha152x[0];
3705 setup[setup_count].irq = aha152x[1];
3706 setup[setup_count].scsiid = aha152x[2];
3707 setup[setup_count].reconnect = aha152x[3];
3708 setup[setup_count].parity = aha152x[4];
3709 setup[setup_count].synchronous = aha152x[5];
3710 setup[setup_count].delay = aha152x[6];
3711 setup[setup_count].ext_trans = aha152x[7];
3712#if defined(AHA152X_DEBUG)
3713 setup[setup_count].debug = aha152x[8];
3714#endif
3715 } else if(io[0]!=0 || irq[0]!=0) {
3716 if(io[0]!=0) setup[setup_count].io_port = io[0];
3717 if(irq[0]!=0) setup[setup_count].irq = irq[0];
3718
3719 setup[setup_count].scsiid = scsiid[0];
3720 setup[setup_count].reconnect = reconnect[0];
3721 setup[setup_count].parity = parity[0];
3722 setup[setup_count].synchronous = sync[0];
3723 setup[setup_count].delay = delay[0];
3724 setup[setup_count].ext_trans = exttrans[0];
3725#if defined(AHA152X_DEBUG)
3726 setup[setup_count].debug = debug[0];
3727#endif
3728 }
3729
3730 if (checksetup(&setup[setup_count]))
3731 setup_count++;
3732 else
3733 printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
3734 setup[setup_count].io_port,
3735 setup[setup_count].irq,
3736 setup[setup_count].scsiid,
3737 setup[setup_count].reconnect,
3738 setup[setup_count].parity,
3739 setup[setup_count].synchronous,
3740 setup[setup_count].delay,
3741 setup[setup_count].ext_trans);
3742 }
3743
3744 if (setup_count<ARRAY_SIZE(setup) && (aha152x1[0]!=0 || io[1]!=0 || irq[1]!=0)) {
3745 if(aha152x1[0]!=0) {
3746 setup[setup_count].conf = "";
3747 setup[setup_count].io_port = aha152x1[0];
3748 setup[setup_count].irq = aha152x1[1];
3749 setup[setup_count].scsiid = aha152x1[2];
3750 setup[setup_count].reconnect = aha152x1[3];
3751 setup[setup_count].parity = aha152x1[4];
3752 setup[setup_count].synchronous = aha152x1[5];
3753 setup[setup_count].delay = aha152x1[6];
3754 setup[setup_count].ext_trans = aha152x1[7];
3755#if defined(AHA152X_DEBUG)
3756 setup[setup_count].debug = aha152x1[8];
3757#endif
3758 } else if(io[1]!=0 || irq[1]!=0) {
3759 if(io[1]!=0) setup[setup_count].io_port = io[1];
3760 if(irq[1]!=0) setup[setup_count].irq = irq[1];
3761
3762 setup[setup_count].scsiid = scsiid[1];
3763 setup[setup_count].reconnect = reconnect[1];
3764 setup[setup_count].parity = parity[1];
3765 setup[setup_count].synchronous = sync[1];
3766 setup[setup_count].delay = delay[1];
3767 setup[setup_count].ext_trans = exttrans[1];
3768#if defined(AHA152X_DEBUG)
3769 setup[setup_count].debug = debug[1];
3770#endif
3771 }
3772 if (checksetup(&setup[setup_count]))
3773 setup_count++;
3774 else
3775 printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
3776 setup[setup_count].io_port,
3777 setup[setup_count].irq,
3778 setup[setup_count].scsiid,
3779 setup[setup_count].reconnect,
3780 setup[setup_count].parity,
3781 setup[setup_count].synchronous,
3782 setup[setup_count].delay,
3783 setup[setup_count].ext_trans);
3784 }
3785#endif
3786
3787#ifdef __ISAPNP__
3788 for(i=0; setup_count<ARRAY_SIZE(setup) && id_table[i].vendor; i++) {
3789 while ( setup_count<ARRAY_SIZE(setup) &&
3790 (dev=pnp_find_dev(NULL, id_table[i].vendor, id_table[i].function, dev)) ) {
3791 if (pnp_device_attach(dev) < 0)
3792 continue;
3793
3794 if (pnp_activate_dev(dev) < 0) {
3795 pnp_device_detach(dev);
3796 continue;
3797 }
3798
3799 if (!pnp_port_valid(dev, 0)) {
3800 pnp_device_detach(dev);
3801 continue;
3802 }
3803
3804 if (setup_count==1 && pnp_port_start(dev, 0)==setup[0].io_port) {
3805 pnp_device_detach(dev);
3806 continue;
3807 }
3808
3809 setup[setup_count].io_port = pnp_port_start(dev, 0);
3810 setup[setup_count].irq = pnp_irq(dev, 0);
3811 setup[setup_count].scsiid = 7;
3812 setup[setup_count].reconnect = 1;
3813 setup[setup_count].parity = 1;
3814 setup[setup_count].synchronous = 1;
3815 setup[setup_count].delay = DELAY_DEFAULT;
3816 setup[setup_count].ext_trans = 0;
3817#if defined(AHA152X_DEBUG)
3818 setup[setup_count].debug = DEBUG_DEFAULT;
3819#endif
3820#if defined(__ISAPNP__)
3821 pnpdev[setup_count] = dev;
3822#endif
3823 printk (KERN_INFO
3824 "aha152x: found ISAPnP adapter at io=0x%03x, irq=%d\n",
3825 setup[setup_count].io_port, setup[setup_count].irq);
3826 setup_count++;
3827 }
3828 }
3829#endif
3830
3831#if defined(AUTOCONF)
3832 if (setup_count<ARRAY_SIZE(setup)) {
3833#if !defined(SKIP_BIOSTEST)
3834 ok = 0;
3835 for (i = 0; i < ARRAY_SIZE(addresses) && !ok; i++) {
3836 void __iomem *p = ioremap(addresses[i], 0x4000);
3837 if (!p)
3838 continue;
3839 for (j = 0; j<ARRAY_SIZE(signatures) && !ok; j++)
3840 ok = check_signature(p + signatures[j].sig_offset,
3841 signatures[j].signature, signatures[j].sig_length);
3842 iounmap(p);
3843 }
3844 if (!ok && setup_count == 0)
3845 return -ENODEV;
3846
3847 printk(KERN_INFO "aha152x: BIOS test: passed, ");
3848#else
3849 printk(KERN_INFO "aha152x: ");
3850#endif /* !SKIP_BIOSTEST */
3851
3852 ok = 0;
3853 for (i = 0; i < ARRAY_SIZE(ports) && setup_count < 2; i++) {
3854 if ((setup_count == 1) && (setup[0].io_port == ports[i]))
3855 continue;
3856
3857 if (!request_region(ports[i], IO_RANGE, "aha152x")) {
3858 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
3859 continue;
3860 }
3861
3862 if (aha152x_porttest(ports[i])) {
3863 setup[setup_count].tc1550 = 0;
3864
3865 conf.cf_port =
3866 (GETPORT(ports[i] + O_PORTA) << 8) + GETPORT(ports[i] + O_PORTB);
3867 } else if (tc1550_porttest(ports[i])) {
3868 setup[setup_count].tc1550 = 1;
3869
3870 conf.cf_port =
3871 (GETPORT(ports[i] + O_TC_PORTA) << 8) + GETPORT(ports[i] + O_TC_PORTB);
3872 } else {
3873 release_region(ports[i], IO_RANGE);
3874 continue;
3875 }
3876
3877 release_region(ports[i], IO_RANGE);
3878
3879 ok++;
3880 setup[setup_count].io_port = ports[i];
3881 setup[setup_count].irq = IRQ_MIN + conf.cf_irq;
3882 setup[setup_count].scsiid = conf.cf_id;
3883 setup[setup_count].reconnect = conf.cf_tardisc;
3884 setup[setup_count].parity = !conf.cf_parity;
3885 setup[setup_count].synchronous = conf.cf_syncneg;
3886 setup[setup_count].delay = DELAY_DEFAULT;
3887 setup[setup_count].ext_trans = 0;
3888#if defined(AHA152X_DEBUG)
3889 setup[setup_count].debug = DEBUG_DEFAULT;
3890#endif
3891 setup_count++;
3892
3893 }
3894
3895 if (ok)
3896 printk("auto configuration: ok, ");
3897 }
3898#endif
3899
3900 printk("%d controller(s) configured\n", setup_count);
3901
3902 for (i=0; i<setup_count; i++) {
3903 if ( request_region(setup[i].io_port, IO_RANGE, "aha152x") ) {
3904 struct Scsi_Host *shpnt = aha152x_probe_one(&setup[i]);
3905
3906 if( !shpnt ) {
3907 release_region(setup[i].io_port, IO_RANGE);
3908#if defined(__ISAPNP__)
3909 } else if( pnpdev[i] ) {
3910 HOSTDATA(shpnt)->pnpdev=pnpdev[i];
3911 pnpdev[i]=NULL;
3912#endif
3913 }
3914 } else {
3915 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup[i].io_port);
3916 }
3917
3918#if defined(__ISAPNP__)
3919 if( pnpdev[i] )
3920 pnp_device_detach(pnpdev[i]);
3921#endif
3922 }
3923
3924 return 0;
3925}
3926
3927static void __exit aha152x_exit(void)
3928{
3929 struct aha152x_hostdata *hd, *tmp;
3930
3931 list_for_each_entry_safe(hd, tmp, &aha152x_host_list, host_list) {
3932 struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
3933
3934 aha152x_release(shost);
3935 }
3936}
3937
3938module_init(aha152x_init);
3939module_exit(aha152x_exit);
3940
3941#if !defined(MODULE)
3942static int __init aha152x_setup(char *str)
3943{
3944#if defined(AHA152X_DEBUG)
3945 int ints[11];
3946#else
3947 int ints[10];
3948#endif
3949 get_options(str, ARRAY_SIZE(ints), ints);
3950
3951 if(setup_count>=ARRAY_SIZE(setup)) {
3952 printk(KERN_ERR "aha152x: you can only configure up to two controllers\n");
3953 return 1;
3954 }
3955
3956 setup[setup_count].conf = str;
3957 setup[setup_count].io_port = ints[0] >= 1 ? ints[1] : 0x340;
3958 setup[setup_count].irq = ints[0] >= 2 ? ints[2] : 11;
3959 setup[setup_count].scsiid = ints[0] >= 3 ? ints[3] : 7;
3960 setup[setup_count].reconnect = ints[0] >= 4 ? ints[4] : 1;
3961 setup[setup_count].parity = ints[0] >= 5 ? ints[5] : 1;
3962 setup[setup_count].synchronous = ints[0] >= 6 ? ints[6] : 1;
3963 setup[setup_count].delay = ints[0] >= 7 ? ints[7] : DELAY_DEFAULT;
3964 setup[setup_count].ext_trans = ints[0] >= 8 ? ints[8] : 0;
3965#if defined(AHA152X_DEBUG)
3966 setup[setup_count].debug = ints[0] >= 9 ? ints[9] : DEBUG_DEFAULT;
3967 if (ints[0] > 9) {
3968 printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
3969 "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>[,<DEBUG>]]]]]]]]\n");
3970#else
3971 if (ints[0] > 8) { /*}*/
3972 printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
3973 "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>]]]]]]]\n");
3974#endif
3975 } else {
3976 setup_count++;
3977 return 0;
3978 }
3979
3980 return 1;
3981}
3982__setup("aha152x=", aha152x_setup);
3983#endif
3984
3985#endif /* !PCMCIA */
1// SPDX-License-Identifier: GPL-2.0-or-later
2/* aha152x.c -- Adaptec AHA-152x driver
3 * Author: Jürgen E. Fischer, fischer@norbit.de
4 * Copyright 1993-2004 Jürgen E. Fischer
5 *
6 * $Id: aha152x.c,v 2.7 2004/01/24 11:42:59 fischer Exp $
7 *
8 * $Log: aha152x.c,v $
9 * Revision 2.7 2004/01/24 11:42:59 fischer
10 * - gather code that is not used by PCMCIA at the end
11 * - move request_region for !PCMCIA case to detection
12 * - migration to new scsi host api (remove legacy code)
13 * - free host scribble before scsi_done
14 * - fix error handling
15 * - one isapnp device added to id_table
16 *
17 * Revision 2.6 2003/10/30 20:52:47 fischer
18 * - interfaces changes for kernel 2.6
19 * - aha152x_probe_one introduced for pcmcia stub
20 * - fixed pnpdev handling
21 * - instead of allocation a new one, reuse command for request sense after check condition and reset
22 * - fixes race in is_complete
23 *
24 * Revision 2.5 2002/04/14 11:24:53 fischer
25 * - isapnp support
26 * - abort fixed
27 * - 2.5 support
28 *
29 * Revision 2.4 2000/12/16 12:53:56 fischer
30 * - allow REQUEST SENSE to be queued
31 * - handle shared PCI interrupts
32 *
33 * Revision 2.3 2000/11/04 16:40:26 fischer
34 * - handle data overruns
35 * - extend timeout for data phases
36 *
37 * Revision 2.2 2000/08/08 19:54:53 fischer
38 * - minor changes
39 *
40 * Revision 2.1 2000/05/17 16:23:17 fischer
41 * - signature update
42 * - fix for data out w/o scatter gather
43 *
44 * Revision 2.0 1999/12/25 15:07:32 fischer
45 * - interrupt routine completly reworked
46 * - basic support for new eh code
47 *
48 * Revision 1.21 1999/11/10 23:46:36 fischer
49 * - default to synchronous operation
50 * - synchronous negotiation fixed
51 * - added timeout to loops
52 * - debugging output can be controlled through procfs
53 *
54 * Revision 1.20 1999/11/07 18:37:31 fischer
55 * - synchronous operation works
56 * - resid support for sg driver
57 *
58 * Revision 1.19 1999/11/02 22:39:59 fischer
59 * - moved leading comments to README.aha152x
60 * - new additional module parameters
61 * - updates for 2.3
62 * - support for the Tripace TC1550 controller
63 * - interrupt handling changed
64 *
65 * Revision 1.18 1996/09/07 20:10:40 fischer
66 * - fixed can_queue handling (multiple outstanding commands working again)
67 *
68 * Revision 1.17 1996/08/17 16:05:14 fischer
69 * - biosparam improved
70 * - interrupt verification
71 * - updated documentation
72 * - cleanups
73 *
74 * Revision 1.16 1996/06/09 00:04:56 root
75 * - added configuration symbols for insmod (aha152x/aha152x1)
76 *
77 * Revision 1.15 1996/04/30 14:52:06 fischer
78 * - proc info fixed
79 * - support for extended translation for >1GB disks
80 *
81 * Revision 1.14 1996/01/17 15:11:20 fischer
82 * - fixed lockup in MESSAGE IN phase after reconnection
83 *
84 * Revision 1.13 1996/01/09 02:15:53 fischer
85 * - some cleanups
86 * - moved request_irq behind controller initialization
87 * (to avoid spurious interrupts)
88 *
89 * Revision 1.12 1995/12/16 12:26:07 fischer
90 * - barrier()s added
91 * - configurable RESET delay added
92 *
93 * Revision 1.11 1995/12/06 21:18:35 fischer
94 * - some minor updates
95 *
96 * Revision 1.10 1995/07/22 19:18:45 fischer
97 * - support for 2 controllers
98 * - started synchronous data transfers (not working yet)
99 *
100 * Revision 1.9 1995/03/18 09:20:24 root
101 * - patches for PCMCIA and modules
102 *
103 * Revision 1.8 1995/01/21 22:07:19 root
104 * - snarf_region => request_region
105 * - aha152x_intr interface change
106 *
107 * Revision 1.7 1995/01/02 23:19:36 root
108 * - updated COMMAND_SIZE to cmd_len
109 * - changed sti() to restore_flags()
110 * - fixed some #ifdef which generated warnings
111 *
112 * Revision 1.6 1994/11/24 20:35:27 root
113 * - problem with odd number of bytes in fifo fixed
114 *
115 * Revision 1.5 1994/10/30 14:39:56 root
116 * - abort code fixed
117 * - debugging improved
118 *
119 * Revision 1.4 1994/09/12 11:33:01 root
120 * - irqaction to request_irq
121 * - abortion updated
122 *
123 * Revision 1.3 1994/08/04 13:53:05 root
124 * - updates for mid-level-driver changes
125 * - accept unexpected BUSFREE phase as error condition
126 * - parity check now configurable
127 *
128 * Revision 1.2 1994/07/03 12:56:36 root
129 * - cleaned up debugging code
130 * - more tweaking on reset delays
131 * - updated abort/reset code (pretty untested...)
132 *
133 * Revision 1.1 1994/05/28 21:18:49 root
134 * - update for mid-level interface change (abort-reset)
135 * - delays after resets adjusted for some slow devices
136 *
137 * Revision 1.0 1994/03/25 12:52:00 root
138 * - Fixed "more data than expected" problem
139 * - added new BIOS signatures
140 *
141 * Revision 0.102 1994/01/31 20:44:12 root
142 * - minor changes in insw/outsw handling
143 *
144 * Revision 0.101 1993/12/13 01:16:27 root
145 * - fixed STATUS phase (non-GOOD stati were dropped sometimes;
146 * fixes problems with CD-ROM sector size detection & media change)
147 *
148 * Revision 0.100 1993/12/10 16:58:47 root
149 * - fix for unsuccessful selections in case of non-continuous id assignments
150 * on the scsi bus.
151 *
152 * Revision 0.99 1993/10/24 16:19:59 root
153 * - fixed DATA IN (rare read errors gone)
154 *
155 * Revision 0.98 1993/10/17 12:54:44 root
156 * - fixed some recent fixes (shame on me)
157 * - moved initialization of scratch area to aha152x_queue
158 *
159 * Revision 0.97 1993/10/09 18:53:53 root
160 * - DATA IN fixed. Rarely left data in the fifo.
161 *
162 * Revision 0.96 1993/10/03 00:53:59 root
163 * - minor changes on DATA IN
164 *
165 * Revision 0.95 1993/09/24 10:36:01 root
166 * - change handling of MSGI after reselection
167 * - fixed sti/cli
168 * - minor changes
169 *
170 * Revision 0.94 1993/09/18 14:08:22 root
171 * - fixed bug in multiple outstanding command code
172 * - changed detection
173 * - support for kernel command line configuration
174 * - reset corrected
175 * - changed message handling
176 *
177 * Revision 0.93 1993/09/15 20:41:19 root
178 * - fixed bugs with multiple outstanding commands
179 *
180 * Revision 0.92 1993/09/13 02:46:33 root
181 * - multiple outstanding commands work (no problems with IBM drive)
182 *
183 * Revision 0.91 1993/09/12 20:51:46 root
184 * added multiple outstanding commands
185 * (some problem with this $%&? IBM device remain)
186 *
187 * Revision 0.9 1993/09/12 11:11:22 root
188 * - corrected auto-configuration
189 * - changed the auto-configuration (added some '#define's)
190 * - added support for dis-/reconnection
191 *
192 * Revision 0.8 1993/09/06 23:09:39 root
193 * - added support for the drive activity light
194 * - minor changes
195 *
196 * Revision 0.7 1993/09/05 14:30:15 root
197 * - improved phase detection
198 * - now using the new snarf_region code of 0.99pl13
199 *
200 * Revision 0.6 1993/09/02 11:01:38 root
201 * first public release; added some signatures and biosparam()
202 *
203 * Revision 0.5 1993/08/30 10:23:30 root
204 * fixed timing problems with my IBM drive
205 *
206 * Revision 0.4 1993/08/29 14:06:52 root
207 * fixed some problems with timeouts due incomplete commands
208 *
209 * Revision 0.3 1993/08/28 15:55:03 root
210 * writing data works too. mounted and worked on a dos partition
211 *
212 * Revision 0.2 1993/08/27 22:42:07 root
213 * reading data works. Mounted a msdos partition.
214 *
215 * Revision 0.1 1993/08/25 13:38:30 root
216 * first "damn thing doesn't work" version
217 *
218 * Revision 0.0 1993/08/14 19:54:25 root
219 * empty function bodies; detect() works.
220 *
221 **************************************************************************
222
223 see Documentation/scsi/aha152x.rst for configuration details
224
225 **************************************************************************/
226
227#include <linux/module.h>
228#include <asm/irq.h>
229#include <linux/io.h>
230#include <linux/blkdev.h>
231#include <linux/completion.h>
232#include <linux/errno.h>
233#include <linux/string.h>
234#include <linux/wait.h>
235#include <linux/ioport.h>
236#include <linux/delay.h>
237#include <linux/proc_fs.h>
238#include <linux/interrupt.h>
239#include <linux/init.h>
240#include <linux/kernel.h>
241#include <linux/isapnp.h>
242#include <linux/spinlock.h>
243#include <linux/workqueue.h>
244#include <linux/list.h>
245#include <linux/slab.h>
246#include <scsi/scsicam.h>
247
248#include "scsi.h"
249#include <scsi/scsi_dbg.h>
250#include <scsi/scsi_host.h>
251#include <scsi/scsi_transport_spi.h>
252#include <scsi/scsi_eh.h>
253#include "aha152x.h"
254
255static LIST_HEAD(aha152x_host_list);
256
257
258/* DEFINES */
259
260/* For PCMCIA cards, always use AUTOCONF */
261#if defined(AHA152X_PCMCIA) || defined(MODULE)
262#if !defined(AUTOCONF)
263#define AUTOCONF
264#endif
265#endif
266
267#if !defined(AUTOCONF) && !defined(SETUP0)
268#error define AUTOCONF or SETUP0
269#endif
270
271#define DO_LOCK(flags) spin_lock_irqsave(&QLOCK,flags)
272#define DO_UNLOCK(flags) spin_unlock_irqrestore(&QLOCK,flags)
273
274#define LEAD "(scsi%d:%d:%d) "
275#define INFO_LEAD KERN_INFO LEAD
276#define CMDINFO(cmd) \
277 (cmd) ? ((cmd)->device->host->host_no) : -1, \
278 (cmd) ? ((cmd)->device->id & 0x0f) : -1, \
279 (cmd) ? ((u8)(cmd)->device->lun & 0x07) : -1
280
281static inline void
282CMD_INC_RESID(struct scsi_cmnd *cmd, int inc)
283{
284 scsi_set_resid(cmd, scsi_get_resid(cmd) + inc);
285}
286
287#define DELAY_DEFAULT 1000
288
289#if defined(AHA152X_PCMCIA)
290#define IRQ_MIN 0
291#define IRQ_MAX 16
292#else
293#define IRQ_MIN 9
294#if defined(__PPC)
295#define IRQ_MAX (nr_irqs-1)
296#else
297#define IRQ_MAX 12
298#endif
299#endif
300
301enum {
302 not_issued = 0x0001, /* command not yet issued */
303 selecting = 0x0002, /* target is being selected */
304 identified = 0x0004, /* IDENTIFY was sent */
305 disconnected = 0x0008, /* target disconnected */
306 completed = 0x0010, /* target sent COMMAND COMPLETE */
307 aborted = 0x0020, /* ABORT was sent */
308 resetted = 0x0040, /* BUS DEVICE RESET was sent */
309 spiordy = 0x0080, /* waiting for SPIORDY to raise */
310 syncneg = 0x0100, /* synchronous negotiation in progress */
311 aborting = 0x0200, /* ABORT is pending */
312 resetting = 0x0400, /* BUS DEVICE RESET is pending */
313 check_condition = 0x0800, /* requesting sense after CHECK CONDITION */
314};
315
316MODULE_AUTHOR("Jürgen Fischer");
317MODULE_DESCRIPTION(AHA152X_REVID);
318MODULE_LICENSE("GPL");
319
320#if !defined(AHA152X_PCMCIA)
321#if defined(MODULE)
322static int io[] = {0, 0};
323module_param_hw_array(io, int, ioport, NULL, 0);
324MODULE_PARM_DESC(io,"base io address of controller");
325
326static int irq[] = {0, 0};
327module_param_hw_array(irq, int, irq, NULL, 0);
328MODULE_PARM_DESC(irq,"interrupt for controller");
329
330static int scsiid[] = {7, 7};
331module_param_array(scsiid, int, NULL, 0);
332MODULE_PARM_DESC(scsiid,"scsi id of controller");
333
334static int reconnect[] = {1, 1};
335module_param_array(reconnect, int, NULL, 0);
336MODULE_PARM_DESC(reconnect,"allow targets to disconnect");
337
338static int parity[] = {1, 1};
339module_param_array(parity, int, NULL, 0);
340MODULE_PARM_DESC(parity,"use scsi parity");
341
342static int sync[] = {1, 1};
343module_param_array(sync, int, NULL, 0);
344MODULE_PARM_DESC(sync,"use synchronous transfers");
345
346static int delay[] = {DELAY_DEFAULT, DELAY_DEFAULT};
347module_param_array(delay, int, NULL, 0);
348MODULE_PARM_DESC(delay,"scsi reset delay");
349
350static int exttrans[] = {0, 0};
351module_param_array(exttrans, int, NULL, 0);
352MODULE_PARM_DESC(exttrans,"use extended translation");
353
354static int aha152x[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
355module_param_array(aha152x, int, NULL, 0);
356MODULE_PARM_DESC(aha152x, "parameters for first controller");
357
358static int aha152x1[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
359module_param_array(aha152x1, int, NULL, 0);
360MODULE_PARM_DESC(aha152x1, "parameters for second controller");
361#endif /* MODULE */
362
363#ifdef __ISAPNP__
364static struct isapnp_device_id id_table[] = {
365 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1502), 0 },
366 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1505), 0 },
367 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1510), 0 },
368 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1515), 0 },
369 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1520), 0 },
370 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x2015), 0 },
371 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1522), 0 },
372 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x2215), 0 },
373 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1530), 0 },
374 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x3015), 0 },
375 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x1532), 0 },
376 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x3215), 0 },
377 { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('A', 'D', 'P'), ISAPNP_FUNCTION(0x6360), 0 },
378 { ISAPNP_DEVICE_SINGLE_END, }
379};
380MODULE_DEVICE_TABLE(isapnp, id_table);
381#endif /* ISAPNP */
382
383#endif /* !AHA152X_PCMCIA */
384
385static struct scsi_host_template aha152x_driver_template;
386
387/*
388 * internal states of the host
389 *
390 */
391enum aha152x_state {
392 idle=0,
393 unknown,
394 seldo,
395 seldi,
396 selto,
397 busfree,
398 msgo,
399 cmd,
400 msgi,
401 status,
402 datai,
403 datao,
404 parerr,
405 rsti,
406 maxstate
407};
408
409/*
410 * current state information of the host
411 *
412 */
413struct aha152x_hostdata {
414 struct scsi_cmnd *issue_SC;
415 /* pending commands to issue */
416
417 struct scsi_cmnd *current_SC;
418 /* current command on the bus */
419
420 struct scsi_cmnd *disconnected_SC;
421 /* commands that disconnected */
422
423 struct scsi_cmnd *done_SC;
424 /* command that was completed */
425
426 spinlock_t lock;
427 /* host lock */
428
429#if defined(AHA152X_STAT)
430 int total_commands;
431 int disconnections;
432 int busfree_without_any_action;
433 int busfree_without_old_command;
434 int busfree_without_new_command;
435 int busfree_without_done_command;
436 int busfree_with_check_condition;
437 int count[maxstate];
438 int count_trans[maxstate];
439 unsigned long time[maxstate];
440#endif
441
442 int commands; /* current number of commands */
443
444 int reconnect; /* disconnection allowed */
445 int parity; /* parity checking enabled */
446 int synchronous; /* synchronous transferes enabled */
447 int delay; /* reset out delay */
448 int ext_trans; /* extended translation enabled */
449
450 int swint; /* software-interrupt was fired during detect() */
451 int service; /* bh needs to be run */
452 int in_intr; /* bh is running */
453
454 /* current state,
455 previous state,
456 last state different from current state */
457 enum aha152x_state state, prevstate, laststate;
458
459 int target;
460 /* reconnecting target */
461
462 unsigned char syncrate[8];
463 /* current synchronous transfer agreements */
464
465 unsigned char syncneg[8];
466 /* 0: no negotiation;
467 * 1: negotiation in progress;
468 * 2: negotiation completed
469 */
470
471 int cmd_i;
472 /* number of sent bytes of current command */
473
474 int msgi_len;
475 /* number of received message bytes */
476 unsigned char msgi[256];
477 /* received message bytes */
478
479 int msgo_i, msgo_len;
480 /* number of sent bytes and length of current messages */
481 unsigned char msgo[256];
482 /* pending messages */
483
484 int data_len;
485 /* number of sent/received bytes in dataphase */
486
487 unsigned long io_port0;
488 unsigned long io_port1;
489
490#ifdef __ISAPNP__
491 struct pnp_dev *pnpdev;
492#endif
493 struct list_head host_list;
494};
495
496
497/*
498 * host specific command extension
499 *
500 */
501struct aha152x_scdata {
502 struct scsi_cmnd *next; /* next sc in queue */
503 struct completion *done;/* semaphore to block on */
504 struct scsi_eh_save ses;
505};
506
507/* access macros for hostdata */
508
509#define HOSTDATA(shpnt) ((struct aha152x_hostdata *) &shpnt->hostdata)
510
511#define HOSTNO ((shpnt)->host_no)
512
513#define CURRENT_SC (HOSTDATA(shpnt)->current_SC)
514#define DONE_SC (HOSTDATA(shpnt)->done_SC)
515#define ISSUE_SC (HOSTDATA(shpnt)->issue_SC)
516#define DISCONNECTED_SC (HOSTDATA(shpnt)->disconnected_SC)
517#define QLOCK (HOSTDATA(shpnt)->lock)
518#define QLOCKER (HOSTDATA(shpnt)->locker)
519#define QLOCKERL (HOSTDATA(shpnt)->lockerl)
520
521#define STATE (HOSTDATA(shpnt)->state)
522#define PREVSTATE (HOSTDATA(shpnt)->prevstate)
523#define LASTSTATE (HOSTDATA(shpnt)->laststate)
524
525#define RECONN_TARGET (HOSTDATA(shpnt)->target)
526
527#define CMD_I (HOSTDATA(shpnt)->cmd_i)
528
529#define MSGO(i) (HOSTDATA(shpnt)->msgo[i])
530#define MSGO_I (HOSTDATA(shpnt)->msgo_i)
531#define MSGOLEN (HOSTDATA(shpnt)->msgo_len)
532#define ADDMSGO(x) (MSGOLEN<256 ? (void)(MSGO(MSGOLEN++)=x) : aha152x_error(shpnt,"MSGO overflow"))
533
534#define MSGI(i) (HOSTDATA(shpnt)->msgi[i])
535#define MSGILEN (HOSTDATA(shpnt)->msgi_len)
536#define ADDMSGI(x) (MSGILEN<256 ? (void)(MSGI(MSGILEN++)=x) : aha152x_error(shpnt,"MSGI overflow"))
537
538#define DATA_LEN (HOSTDATA(shpnt)->data_len)
539
540#define SYNCRATE (HOSTDATA(shpnt)->syncrate[CURRENT_SC->device->id])
541#define SYNCNEG (HOSTDATA(shpnt)->syncneg[CURRENT_SC->device->id])
542
543#define DELAY (HOSTDATA(shpnt)->delay)
544#define EXT_TRANS (HOSTDATA(shpnt)->ext_trans)
545#define TC1550 (HOSTDATA(shpnt)->tc1550)
546#define RECONNECT (HOSTDATA(shpnt)->reconnect)
547#define PARITY (HOSTDATA(shpnt)->parity)
548#define SYNCHRONOUS (HOSTDATA(shpnt)->synchronous)
549
550#define HOSTIOPORT0 (HOSTDATA(shpnt)->io_port0)
551#define HOSTIOPORT1 (HOSTDATA(shpnt)->io_port1)
552
553#define SCDATA(SCpnt) ((struct aha152x_scdata *) (SCpnt)->host_scribble)
554#define SCNEXT(SCpnt) SCDATA(SCpnt)->next
555#define SCSEM(SCpnt) SCDATA(SCpnt)->done
556
557#define SG_ADDRESS(buffer) ((char *) sg_virt((buffer)))
558
559/* state handling */
560static void seldi_run(struct Scsi_Host *shpnt);
561static void seldo_run(struct Scsi_Host *shpnt);
562static void selto_run(struct Scsi_Host *shpnt);
563static void busfree_run(struct Scsi_Host *shpnt);
564
565static void msgo_init(struct Scsi_Host *shpnt);
566static void msgo_run(struct Scsi_Host *shpnt);
567static void msgo_end(struct Scsi_Host *shpnt);
568
569static void cmd_init(struct Scsi_Host *shpnt);
570static void cmd_run(struct Scsi_Host *shpnt);
571static void cmd_end(struct Scsi_Host *shpnt);
572
573static void datai_init(struct Scsi_Host *shpnt);
574static void datai_run(struct Scsi_Host *shpnt);
575static void datai_end(struct Scsi_Host *shpnt);
576
577static void datao_init(struct Scsi_Host *shpnt);
578static void datao_run(struct Scsi_Host *shpnt);
579static void datao_end(struct Scsi_Host *shpnt);
580
581static void status_run(struct Scsi_Host *shpnt);
582
583static void msgi_run(struct Scsi_Host *shpnt);
584static void msgi_end(struct Scsi_Host *shpnt);
585
586static void parerr_run(struct Scsi_Host *shpnt);
587static void rsti_run(struct Scsi_Host *shpnt);
588
589static void is_complete(struct Scsi_Host *shpnt);
590
591/*
592 * driver states
593 *
594 */
595static struct {
596 char *name;
597 void (*init)(struct Scsi_Host *);
598 void (*run)(struct Scsi_Host *);
599 void (*end)(struct Scsi_Host *);
600 int spio;
601} states[] = {
602 { "idle", NULL, NULL, NULL, 0},
603 { "unknown", NULL, NULL, NULL, 0},
604 { "seldo", NULL, seldo_run, NULL, 0},
605 { "seldi", NULL, seldi_run, NULL, 0},
606 { "selto", NULL, selto_run, NULL, 0},
607 { "busfree", NULL, busfree_run, NULL, 0},
608 { "msgo", msgo_init, msgo_run, msgo_end, 1},
609 { "cmd", cmd_init, cmd_run, cmd_end, 1},
610 { "msgi", NULL, msgi_run, msgi_end, 1},
611 { "status", NULL, status_run, NULL, 1},
612 { "datai", datai_init, datai_run, datai_end, 0},
613 { "datao", datao_init, datao_run, datao_end, 0},
614 { "parerr", NULL, parerr_run, NULL, 0},
615 { "rsti", NULL, rsti_run, NULL, 0},
616};
617
618/* setup & interrupt */
619static irqreturn_t intr(int irq, void *dev_id);
620static void reset_ports(struct Scsi_Host *shpnt);
621static void aha152x_error(struct Scsi_Host *shpnt, char *msg);
622static void done(struct Scsi_Host *shpnt, int error);
623
624/* diagnostics */
625static void show_command(struct scsi_cmnd * ptr);
626static void show_queues(struct Scsi_Host *shpnt);
627static void disp_enintr(struct Scsi_Host *shpnt);
628
629
630/*
631 * queue services:
632 *
633 */
634static inline void append_SC(struct scsi_cmnd **SC, struct scsi_cmnd *new_SC)
635{
636 struct scsi_cmnd *end;
637
638 SCNEXT(new_SC) = NULL;
639 if (!*SC)
640 *SC = new_SC;
641 else {
642 for (end = *SC; SCNEXT(end); end = SCNEXT(end))
643 ;
644 SCNEXT(end) = new_SC;
645 }
646}
647
648static inline struct scsi_cmnd *remove_first_SC(struct scsi_cmnd ** SC)
649{
650 struct scsi_cmnd *ptr;
651
652 ptr = *SC;
653 if (ptr) {
654 *SC = SCNEXT(*SC);
655 SCNEXT(ptr)=NULL;
656 }
657 return ptr;
658}
659
660static inline struct scsi_cmnd *remove_lun_SC(struct scsi_cmnd ** SC,
661 int target, int lun)
662{
663 struct scsi_cmnd *ptr, *prev;
664
665 for (ptr = *SC, prev = NULL;
666 ptr && ((ptr->device->id != target) || (ptr->device->lun != lun));
667 prev = ptr, ptr = SCNEXT(ptr))
668 ;
669
670 if (ptr) {
671 if (prev)
672 SCNEXT(prev) = SCNEXT(ptr);
673 else
674 *SC = SCNEXT(ptr);
675
676 SCNEXT(ptr)=NULL;
677 }
678
679 return ptr;
680}
681
682static inline struct scsi_cmnd *remove_SC(struct scsi_cmnd **SC,
683 struct scsi_cmnd *SCp)
684{
685 struct scsi_cmnd *ptr, *prev;
686
687 for (ptr = *SC, prev = NULL;
688 ptr && SCp!=ptr;
689 prev = ptr, ptr = SCNEXT(ptr))
690 ;
691
692 if (ptr) {
693 if (prev)
694 SCNEXT(prev) = SCNEXT(ptr);
695 else
696 *SC = SCNEXT(ptr);
697
698 SCNEXT(ptr)=NULL;
699 }
700
701 return ptr;
702}
703
704static irqreturn_t swintr(int irqno, void *dev_id)
705{
706 struct Scsi_Host *shpnt = dev_id;
707
708 HOSTDATA(shpnt)->swint++;
709
710 SETPORT(DMACNTRL0, INTEN);
711 return IRQ_HANDLED;
712}
713
714struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *setup)
715{
716 struct Scsi_Host *shpnt;
717
718 shpnt = scsi_host_alloc(&aha152x_driver_template, sizeof(struct aha152x_hostdata));
719 if (!shpnt) {
720 printk(KERN_ERR "aha152x: scsi_host_alloc failed\n");
721 return NULL;
722 }
723
724 memset(HOSTDATA(shpnt), 0, sizeof *HOSTDATA(shpnt));
725 INIT_LIST_HEAD(&HOSTDATA(shpnt)->host_list);
726
727 /* need to have host registered before triggering any interrupt */
728 list_add_tail(&HOSTDATA(shpnt)->host_list, &aha152x_host_list);
729
730 shpnt->io_port = setup->io_port;
731 shpnt->n_io_port = IO_RANGE;
732 shpnt->irq = setup->irq;
733
734 if (!setup->tc1550) {
735 HOSTIOPORT0 = setup->io_port;
736 HOSTIOPORT1 = setup->io_port;
737 } else {
738 HOSTIOPORT0 = setup->io_port+0x10;
739 HOSTIOPORT1 = setup->io_port-0x10;
740 }
741
742 spin_lock_init(&QLOCK);
743 RECONNECT = setup->reconnect;
744 SYNCHRONOUS = setup->synchronous;
745 PARITY = setup->parity;
746 DELAY = setup->delay;
747 EXT_TRANS = setup->ext_trans;
748
749 SETPORT(SCSIID, setup->scsiid << 4);
750 shpnt->this_id = setup->scsiid;
751
752 if (setup->reconnect)
753 shpnt->can_queue = AHA152X_MAXQUEUE;
754
755 /* RESET OUT */
756 printk("aha152x: resetting bus...\n");
757 SETPORT(SCSISEQ, SCSIRSTO);
758 mdelay(256);
759 SETPORT(SCSISEQ, 0);
760 mdelay(DELAY);
761
762 reset_ports(shpnt);
763
764 printk(KERN_INFO
765 "aha152x%d%s: "
766 "vital data: rev=%x, "
767 "io=0x%03lx (0x%03lx/0x%03lx), "
768 "irq=%d, "
769 "scsiid=%d, "
770 "reconnect=%s, "
771 "parity=%s, "
772 "synchronous=%s, "
773 "delay=%d, "
774 "extended translation=%s\n",
775 shpnt->host_no, setup->tc1550 ? " (tc1550 mode)" : "",
776 GETPORT(REV) & 0x7,
777 shpnt->io_port, HOSTIOPORT0, HOSTIOPORT1,
778 shpnt->irq,
779 shpnt->this_id,
780 RECONNECT ? "enabled" : "disabled",
781 PARITY ? "enabled" : "disabled",
782 SYNCHRONOUS ? "enabled" : "disabled",
783 DELAY,
784 EXT_TRANS ? "enabled" : "disabled");
785
786 /* not expecting any interrupts */
787 SETPORT(SIMODE0, 0);
788 SETPORT(SIMODE1, 0);
789
790 if (request_irq(shpnt->irq, swintr, IRQF_SHARED, "aha152x", shpnt)) {
791 printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq);
792 goto out_host_put;
793 }
794
795 HOSTDATA(shpnt)->swint = 0;
796
797 printk(KERN_INFO "aha152x%d: trying software interrupt, ", shpnt->host_no);
798
799 mb();
800 SETPORT(DMACNTRL0, SWINT|INTEN);
801 mdelay(1000);
802 free_irq(shpnt->irq, shpnt);
803
804 if (!HOSTDATA(shpnt)->swint) {
805 if (TESTHI(DMASTAT, INTSTAT)) {
806 printk("lost.\n");
807 } else {
808 printk("failed.\n");
809 }
810
811 SETPORT(DMACNTRL0, INTEN);
812
813 printk(KERN_ERR "aha152x%d: irq %d possibly wrong. "
814 "Please verify.\n", shpnt->host_no, shpnt->irq);
815 goto out_host_put;
816 }
817 printk("ok.\n");
818
819
820 /* clear interrupts */
821 SETPORT(SSTAT0, 0x7f);
822 SETPORT(SSTAT1, 0xef);
823
824 if (request_irq(shpnt->irq, intr, IRQF_SHARED, "aha152x", shpnt)) {
825 printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq);
826 goto out_host_put;
827 }
828
829 if( scsi_add_host(shpnt, NULL) ) {
830 free_irq(shpnt->irq, shpnt);
831 printk(KERN_ERR "aha152x%d: failed to add host.\n", shpnt->host_no);
832 goto out_host_put;
833 }
834
835 scsi_scan_host(shpnt);
836
837 return shpnt;
838
839out_host_put:
840 list_del(&HOSTDATA(shpnt)->host_list);
841 scsi_host_put(shpnt);
842
843 return NULL;
844}
845
846void aha152x_release(struct Scsi_Host *shpnt)
847{
848 if (!shpnt)
849 return;
850
851 scsi_remove_host(shpnt);
852 if (shpnt->irq)
853 free_irq(shpnt->irq, shpnt);
854
855#if !defined(AHA152X_PCMCIA)
856 if (shpnt->io_port)
857 release_region(shpnt->io_port, IO_RANGE);
858#endif
859
860#ifdef __ISAPNP__
861 if (HOSTDATA(shpnt)->pnpdev)
862 pnp_device_detach(HOSTDATA(shpnt)->pnpdev);
863#endif
864
865 list_del(&HOSTDATA(shpnt)->host_list);
866 scsi_host_put(shpnt);
867}
868
869
870/*
871 * setup controller to generate interrupts depending
872 * on current state (lock has to be acquired)
873 *
874 */
875static int setup_expected_interrupts(struct Scsi_Host *shpnt)
876{
877 if(CURRENT_SC) {
878 CURRENT_SC->SCp.phase |= 1 << 16;
879
880 if(CURRENT_SC->SCp.phase & selecting) {
881 SETPORT(SSTAT1, SELTO);
882 SETPORT(SIMODE0, ENSELDO | (DISCONNECTED_SC ? ENSELDI : 0));
883 SETPORT(SIMODE1, ENSELTIMO);
884 } else {
885 SETPORT(SIMODE0, (CURRENT_SC->SCp.phase & spiordy) ? ENSPIORDY : 0);
886 SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
887 }
888 } else if(STATE==seldi) {
889 SETPORT(SIMODE0, 0);
890 SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
891 } else {
892 SETPORT(SIMODE0, DISCONNECTED_SC ? ENSELDI : 0);
893 SETPORT(SIMODE1, ENSCSIRST | ( (ISSUE_SC||DONE_SC) ? ENBUSFREE : 0));
894 }
895
896 if(!HOSTDATA(shpnt)->in_intr)
897 SETBITS(DMACNTRL0, INTEN);
898
899 return TESTHI(DMASTAT, INTSTAT);
900}
901
902
903/*
904 * Queue a command and setup interrupts for a free bus.
905 */
906static int aha152x_internal_queue(struct scsi_cmnd *SCpnt,
907 struct completion *complete,
908 int phase, void (*done)(struct scsi_cmnd *))
909{
910 struct Scsi_Host *shpnt = SCpnt->device->host;
911 unsigned long flags;
912
913 SCpnt->scsi_done = done;
914 SCpnt->SCp.phase = not_issued | phase;
915 SCpnt->SCp.Status = 0x1; /* Ilegal status by SCSI standard */
916 SCpnt->SCp.Message = 0;
917 SCpnt->SCp.have_data_in = 0;
918 SCpnt->SCp.sent_command = 0;
919
920 if(SCpnt->SCp.phase & (resetting|check_condition)) {
921 if (!SCpnt->host_scribble || SCSEM(SCpnt) || SCNEXT(SCpnt)) {
922 scmd_printk(KERN_ERR, SCpnt, "cannot reuse command\n");
923 return FAILED;
924 }
925 } else {
926 SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
927 if(!SCpnt->host_scribble) {
928 scmd_printk(KERN_ERR, SCpnt, "allocation failed\n");
929 return FAILED;
930 }
931 }
932
933 SCNEXT(SCpnt) = NULL;
934 SCSEM(SCpnt) = complete;
935
936 /* setup scratch area
937 SCp.ptr : buffer pointer
938 SCp.this_residual : buffer length
939 SCp.buffer : next buffer
940 SCp.phase : current state of the command */
941
942 if ((phase & resetting) || !scsi_sglist(SCpnt)) {
943 SCpnt->SCp.ptr = NULL;
944 SCpnt->SCp.this_residual = 0;
945 scsi_set_resid(SCpnt, 0);
946 SCpnt->SCp.buffer = NULL;
947 } else {
948 scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
949 SCpnt->SCp.buffer = scsi_sglist(SCpnt);
950 SCpnt->SCp.ptr = SG_ADDRESS(SCpnt->SCp.buffer);
951 SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
952 }
953
954 DO_LOCK(flags);
955
956#if defined(AHA152X_STAT)
957 HOSTDATA(shpnt)->total_commands++;
958#endif
959
960 /* Turn led on, when this is the first command. */
961 HOSTDATA(shpnt)->commands++;
962 if (HOSTDATA(shpnt)->commands==1)
963 SETPORT(PORTA, 1);
964
965 append_SC(&ISSUE_SC, SCpnt);
966
967 if(!HOSTDATA(shpnt)->in_intr)
968 setup_expected_interrupts(shpnt);
969
970 DO_UNLOCK(flags);
971
972 return 0;
973}
974
975/*
976 * queue a command
977 *
978 */
979static int aha152x_queue_lck(struct scsi_cmnd *SCpnt,
980 void (*done)(struct scsi_cmnd *))
981{
982 return aha152x_internal_queue(SCpnt, NULL, 0, done);
983}
984
985static DEF_SCSI_QCMD(aha152x_queue)
986
987
988/*
989 *
990 */
991static void reset_done(struct scsi_cmnd *SCpnt)
992{
993 if(SCSEM(SCpnt)) {
994 complete(SCSEM(SCpnt));
995 } else {
996 printk(KERN_ERR "aha152x: reset_done w/o completion\n");
997 }
998}
999
1000/*
1001 * Abort a command
1002 *
1003 */
1004static int aha152x_abort(struct scsi_cmnd *SCpnt)
1005{
1006 struct Scsi_Host *shpnt = SCpnt->device->host;
1007 struct scsi_cmnd *ptr;
1008 unsigned long flags;
1009
1010 DO_LOCK(flags);
1011
1012 ptr=remove_SC(&ISSUE_SC, SCpnt);
1013
1014 if(ptr) {
1015 HOSTDATA(shpnt)->commands--;
1016 if (!HOSTDATA(shpnt)->commands)
1017 SETPORT(PORTA, 0);
1018 DO_UNLOCK(flags);
1019
1020 kfree(SCpnt->host_scribble);
1021 SCpnt->host_scribble=NULL;
1022
1023 return SUCCESS;
1024 }
1025
1026 DO_UNLOCK(flags);
1027
1028 /*
1029 * FIXME:
1030 * for current command: queue ABORT for message out and raise ATN
1031 * for disconnected command: pseudo SC with ABORT message or ABORT on reselection?
1032 *
1033 */
1034
1035 scmd_printk(KERN_ERR, SCpnt,
1036 "cannot abort running or disconnected command\n");
1037
1038 return FAILED;
1039}
1040
1041/*
1042 * Reset a device
1043 *
1044 */
1045static int aha152x_device_reset(struct scsi_cmnd * SCpnt)
1046{
1047 struct Scsi_Host *shpnt = SCpnt->device->host;
1048 DECLARE_COMPLETION(done);
1049 int ret, issued, disconnected;
1050 unsigned char old_cmd_len = SCpnt->cmd_len;
1051 unsigned long flags;
1052 unsigned long timeleft;
1053
1054 if(CURRENT_SC==SCpnt) {
1055 scmd_printk(KERN_ERR, SCpnt, "cannot reset current device\n");
1056 return FAILED;
1057 }
1058
1059 DO_LOCK(flags);
1060 issued = remove_SC(&ISSUE_SC, SCpnt) == NULL;
1061 disconnected = issued && remove_SC(&DISCONNECTED_SC, SCpnt);
1062 DO_UNLOCK(flags);
1063
1064 SCpnt->cmd_len = 0;
1065
1066 aha152x_internal_queue(SCpnt, &done, resetting, reset_done);
1067
1068 timeleft = wait_for_completion_timeout(&done, 100*HZ);
1069 if (!timeleft) {
1070 /* remove command from issue queue */
1071 DO_LOCK(flags);
1072 remove_SC(&ISSUE_SC, SCpnt);
1073 DO_UNLOCK(flags);
1074 }
1075
1076 SCpnt->cmd_len = old_cmd_len;
1077
1078 DO_LOCK(flags);
1079
1080 if(SCpnt->SCp.phase & resetted) {
1081 HOSTDATA(shpnt)->commands--;
1082 if (!HOSTDATA(shpnt)->commands)
1083 SETPORT(PORTA, 0);
1084 kfree(SCpnt->host_scribble);
1085 SCpnt->host_scribble=NULL;
1086
1087 ret = SUCCESS;
1088 } else {
1089 /* requeue */
1090 if(!issued) {
1091 append_SC(&ISSUE_SC, SCpnt);
1092 } else if(disconnected) {
1093 append_SC(&DISCONNECTED_SC, SCpnt);
1094 }
1095
1096 ret = FAILED;
1097 }
1098
1099 DO_UNLOCK(flags);
1100 return ret;
1101}
1102
1103static void free_hard_reset_SCs(struct Scsi_Host *shpnt,
1104 struct scsi_cmnd **SCs)
1105{
1106 struct scsi_cmnd *ptr;
1107
1108 ptr=*SCs;
1109 while(ptr) {
1110 struct scsi_cmnd *next;
1111
1112 if(SCDATA(ptr)) {
1113 next = SCNEXT(ptr);
1114 } else {
1115 scmd_printk(KERN_DEBUG, ptr,
1116 "queue corrupted at %p\n", ptr);
1117 next = NULL;
1118 }
1119
1120 if (!ptr->device->soft_reset) {
1121 remove_SC(SCs, ptr);
1122 HOSTDATA(shpnt)->commands--;
1123 kfree(ptr->host_scribble);
1124 ptr->host_scribble=NULL;
1125 }
1126
1127 ptr = next;
1128 }
1129}
1130
1131/*
1132 * Reset the bus
1133 *
1134 * AIC-6260 has a hard reset (MRST signal), but apparently
1135 * one cannot trigger it via software. So live with
1136 * a soft reset; no-one seemed to have cared.
1137 */
1138static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
1139{
1140 unsigned long flags;
1141
1142 DO_LOCK(flags);
1143
1144 free_hard_reset_SCs(shpnt, &ISSUE_SC);
1145 free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
1146
1147 SETPORT(SCSISEQ, SCSIRSTO);
1148 mdelay(256);
1149 SETPORT(SCSISEQ, 0);
1150 mdelay(DELAY);
1151
1152 setup_expected_interrupts(shpnt);
1153 if(HOSTDATA(shpnt)->commands==0)
1154 SETPORT(PORTA, 0);
1155
1156 DO_UNLOCK(flags);
1157
1158 return SUCCESS;
1159}
1160
1161/*
1162 * Reset the bus
1163 *
1164 */
1165static int aha152x_bus_reset(struct scsi_cmnd *SCpnt)
1166{
1167 return aha152x_bus_reset_host(SCpnt->device->host);
1168}
1169
1170/*
1171 * Restore default values to the AIC-6260 registers and reset the fifos
1172 *
1173 */
1174static void reset_ports(struct Scsi_Host *shpnt)
1175{
1176 unsigned long flags;
1177
1178 /* disable interrupts */
1179 SETPORT(DMACNTRL0, RSTFIFO);
1180
1181 SETPORT(SCSISEQ, 0);
1182
1183 SETPORT(SXFRCTL1, 0);
1184 SETPORT(SCSISIG, 0);
1185 SETRATE(0);
1186
1187 /* clear all interrupt conditions */
1188 SETPORT(SSTAT0, 0x7f);
1189 SETPORT(SSTAT1, 0xef);
1190
1191 SETPORT(SSTAT4, SYNCERR | FWERR | FRERR);
1192
1193 SETPORT(DMACNTRL0, 0);
1194 SETPORT(DMACNTRL1, 0);
1195
1196 SETPORT(BRSTCNTRL, 0xf1);
1197
1198 /* clear SCSI fifos and transfer count */
1199 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
1200 SETPORT(SXFRCTL0, CH1);
1201
1202 DO_LOCK(flags);
1203 setup_expected_interrupts(shpnt);
1204 DO_UNLOCK(flags);
1205}
1206
1207/*
1208 * Reset the host (bus and controller)
1209 *
1210 */
1211int aha152x_host_reset_host(struct Scsi_Host *shpnt)
1212{
1213 aha152x_bus_reset_host(shpnt);
1214 reset_ports(shpnt);
1215
1216 return SUCCESS;
1217}
1218
1219/*
1220 * Return the "logical geometry"
1221 *
1222 */
1223static int aha152x_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1224 sector_t capacity, int *info_array)
1225{
1226 struct Scsi_Host *shpnt = sdev->host;
1227
1228 /* try default translation */
1229 info_array[0] = 64;
1230 info_array[1] = 32;
1231 info_array[2] = (unsigned long)capacity / (64 * 32);
1232
1233 /* for disks >1GB do some guessing */
1234 if (info_array[2] >= 1024) {
1235 int info[3];
1236
1237 /* try to figure out the geometry from the partition table */
1238 if (scsicam_bios_param(bdev, capacity, info) < 0 ||
1239 !((info[0] == 64 && info[1] == 32) || (info[0] == 255 && info[1] == 63))) {
1240 if (EXT_TRANS) {
1241 printk(KERN_NOTICE
1242 "aha152x: unable to verify geometry for disk with >1GB.\n"
1243 " using extended translation.\n");
1244 info_array[0] = 255;
1245 info_array[1] = 63;
1246 info_array[2] = (unsigned long)capacity / (255 * 63);
1247 } else {
1248 printk(KERN_NOTICE
1249 "aha152x: unable to verify geometry for disk with >1GB.\n"
1250 " Using default translation. Please verify yourself.\n"
1251 " Perhaps you need to enable extended translation in the driver.\n"
1252 " See Documentation/scsi/aha152x.rst for details.\n");
1253 }
1254 } else {
1255 info_array[0] = info[0];
1256 info_array[1] = info[1];
1257 info_array[2] = info[2];
1258
1259 if (info[0] == 255 && !EXT_TRANS) {
1260 printk(KERN_NOTICE
1261 "aha152x: current partition table is using extended translation.\n"
1262 " using it also, although it's not explicitly enabled.\n");
1263 }
1264 }
1265 }
1266
1267 return 0;
1268}
1269
1270/*
1271 * Internal done function
1272 *
1273 */
1274static void done(struct Scsi_Host *shpnt, int error)
1275{
1276 if (CURRENT_SC) {
1277 if(DONE_SC)
1278 scmd_printk(KERN_ERR, CURRENT_SC,
1279 "there's already a completed command %p "
1280 "- will cause abort\n", DONE_SC);
1281
1282 DONE_SC = CURRENT_SC;
1283 CURRENT_SC = NULL;
1284 DONE_SC->result = error;
1285 } else
1286 printk(KERN_ERR "aha152x: done() called outside of command\n");
1287}
1288
1289static struct work_struct aha152x_tq;
1290
1291/*
1292 * Run service completions on the card with interrupts enabled.
1293 *
1294 */
1295static void run(struct work_struct *work)
1296{
1297 struct aha152x_hostdata *hd;
1298
1299 list_for_each_entry(hd, &aha152x_host_list, host_list) {
1300 struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
1301
1302 is_complete(shost);
1303 }
1304}
1305
1306/*
1307 * Interrupt handler
1308 *
1309 */
1310static irqreturn_t intr(int irqno, void *dev_id)
1311{
1312 struct Scsi_Host *shpnt = dev_id;
1313 unsigned long flags;
1314 unsigned char rev, dmacntrl0;
1315
1316 /*
1317 * Read a couple of registers that are known to not be all 1's. If
1318 * we read all 1's (-1), that means that either:
1319 *
1320 * a. The host adapter chip has gone bad, and we cannot control it,
1321 * OR
1322 * b. The host adapter is a PCMCIA card that has been ejected
1323 *
1324 * In either case, we cannot do anything with the host adapter at
1325 * this point in time. So just ignore the interrupt and return.
1326 * In the latter case, the interrupt might actually be meant for
1327 * someone else sharing this IRQ, and that driver will handle it.
1328 */
1329 rev = GETPORT(REV);
1330 dmacntrl0 = GETPORT(DMACNTRL0);
1331 if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
1332 return IRQ_NONE;
1333
1334 if( TESTLO(DMASTAT, INTSTAT) )
1335 return IRQ_NONE;
1336
1337 /* no more interrupts from the controller, while we're busy.
1338 INTEN is restored by the BH handler */
1339 CLRBITS(DMACNTRL0, INTEN);
1340
1341 DO_LOCK(flags);
1342 if( HOSTDATA(shpnt)->service==0 ) {
1343 HOSTDATA(shpnt)->service=1;
1344
1345 /* Poke the BH handler */
1346 INIT_WORK(&aha152x_tq, run);
1347 schedule_work(&aha152x_tq);
1348 }
1349 DO_UNLOCK(flags);
1350
1351 return IRQ_HANDLED;
1352}
1353
1354/*
1355 * busfree phase
1356 * - handle completition/disconnection/error of current command
1357 * - start selection for next command (if any)
1358 */
1359static void busfree_run(struct Scsi_Host *shpnt)
1360{
1361 unsigned long flags;
1362#if defined(AHA152X_STAT)
1363 int action=0;
1364#endif
1365
1366 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
1367 SETPORT(SXFRCTL0, CH1);
1368
1369 SETPORT(SSTAT1, CLRBUSFREE);
1370
1371 if(CURRENT_SC) {
1372#if defined(AHA152X_STAT)
1373 action++;
1374#endif
1375 CURRENT_SC->SCp.phase &= ~syncneg;
1376
1377 if(CURRENT_SC->SCp.phase & completed) {
1378 /* target sent COMMAND COMPLETE */
1379 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16));
1380
1381 } else if(CURRENT_SC->SCp.phase & aborted) {
1382 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_ABORT << 16));
1383
1384 } else if(CURRENT_SC->SCp.phase & resetted) {
1385 done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_RESET << 16));
1386
1387 } else if(CURRENT_SC->SCp.phase & disconnected) {
1388 /* target sent DISCONNECT */
1389#if defined(AHA152X_STAT)
1390 HOSTDATA(shpnt)->disconnections++;
1391#endif
1392 append_SC(&DISCONNECTED_SC, CURRENT_SC);
1393 CURRENT_SC->SCp.phase |= 1 << 16;
1394 CURRENT_SC = NULL;
1395
1396 } else {
1397 done(shpnt, DID_ERROR << 16);
1398 }
1399#if defined(AHA152X_STAT)
1400 } else {
1401 HOSTDATA(shpnt)->busfree_without_old_command++;
1402#endif
1403 }
1404
1405 DO_LOCK(flags);
1406
1407 if(DONE_SC) {
1408#if defined(AHA152X_STAT)
1409 action++;
1410#endif
1411
1412 if(DONE_SC->SCp.phase & check_condition) {
1413 struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC;
1414 struct aha152x_scdata *sc = SCDATA(cmd);
1415
1416 scsi_eh_restore_cmnd(cmd, &sc->ses);
1417
1418 cmd->SCp.Status = SAM_STAT_CHECK_CONDITION;
1419
1420 HOSTDATA(shpnt)->commands--;
1421 if (!HOSTDATA(shpnt)->commands)
1422 SETPORT(PORTA, 0); /* turn led off */
1423 } else if(DONE_SC->SCp.Status==SAM_STAT_CHECK_CONDITION) {
1424#if defined(AHA152X_STAT)
1425 HOSTDATA(shpnt)->busfree_with_check_condition++;
1426#endif
1427
1428 if(!(DONE_SC->SCp.phase & not_issued)) {
1429 struct aha152x_scdata *sc;
1430 struct scsi_cmnd *ptr = DONE_SC;
1431 DONE_SC=NULL;
1432
1433 sc = SCDATA(ptr);
1434 /* It was allocated in aha152x_internal_queue? */
1435 BUG_ON(!sc);
1436 scsi_eh_prep_cmnd(ptr, &sc->ses, NULL, 0, ~0);
1437
1438 DO_UNLOCK(flags);
1439 aha152x_internal_queue(ptr, NULL, check_condition, ptr->scsi_done);
1440 DO_LOCK(flags);
1441 }
1442 }
1443
1444 if(DONE_SC && DONE_SC->scsi_done) {
1445 struct scsi_cmnd *ptr = DONE_SC;
1446 DONE_SC=NULL;
1447
1448 /* turn led off, when no commands are in the driver */
1449 HOSTDATA(shpnt)->commands--;
1450 if (!HOSTDATA(shpnt)->commands)
1451 SETPORT(PORTA, 0); /* turn led off */
1452
1453 if(ptr->scsi_done != reset_done) {
1454 kfree(ptr->host_scribble);
1455 ptr->host_scribble=NULL;
1456 }
1457
1458 DO_UNLOCK(flags);
1459 ptr->scsi_done(ptr);
1460 DO_LOCK(flags);
1461 }
1462
1463 DONE_SC=NULL;
1464#if defined(AHA152X_STAT)
1465 } else {
1466 HOSTDATA(shpnt)->busfree_without_done_command++;
1467#endif
1468 }
1469
1470 if(ISSUE_SC)
1471 CURRENT_SC = remove_first_SC(&ISSUE_SC);
1472
1473 DO_UNLOCK(flags);
1474
1475 if(CURRENT_SC) {
1476#if defined(AHA152X_STAT)
1477 action++;
1478#endif
1479 CURRENT_SC->SCp.phase |= selecting;
1480
1481 /* clear selection timeout */
1482 SETPORT(SSTAT1, SELTO);
1483
1484 SETPORT(SCSIID, (shpnt->this_id << OID_) | CURRENT_SC->device->id);
1485 SETPORT(SXFRCTL1, (PARITY ? ENSPCHK : 0 ) | ENSTIMER);
1486 SETPORT(SCSISEQ, ENSELO | ENAUTOATNO | (DISCONNECTED_SC ? ENRESELI : 0));
1487 } else {
1488#if defined(AHA152X_STAT)
1489 HOSTDATA(shpnt)->busfree_without_new_command++;
1490#endif
1491 SETPORT(SCSISEQ, DISCONNECTED_SC ? ENRESELI : 0);
1492 }
1493
1494#if defined(AHA152X_STAT)
1495 if(!action)
1496 HOSTDATA(shpnt)->busfree_without_any_action++;
1497#endif
1498}
1499
1500/*
1501 * Selection done (OUT)
1502 * - queue IDENTIFY message and SDTR to selected target for message out
1503 * (ATN asserted automagically via ENAUTOATNO in busfree())
1504 */
1505static void seldo_run(struct Scsi_Host *shpnt)
1506{
1507 SETPORT(SCSISIG, 0);
1508 SETPORT(SSTAT1, CLRBUSFREE);
1509 SETPORT(SSTAT1, CLRPHASECHG);
1510
1511 CURRENT_SC->SCp.phase &= ~(selecting|not_issued);
1512
1513 SETPORT(SCSISEQ, 0);
1514
1515 if (TESTLO(SSTAT0, SELDO)) {
1516 scmd_printk(KERN_ERR, CURRENT_SC,
1517 "aha152x: passing bus free condition\n");
1518 done(shpnt, DID_NO_CONNECT << 16);
1519 return;
1520 }
1521
1522 SETPORT(SSTAT0, CLRSELDO);
1523
1524 ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
1525
1526 if (CURRENT_SC->SCp.phase & aborting) {
1527 ADDMSGO(ABORT);
1528 } else if (CURRENT_SC->SCp.phase & resetting) {
1529 ADDMSGO(BUS_DEVICE_RESET);
1530 } else if (SYNCNEG==0 && SYNCHRONOUS) {
1531 CURRENT_SC->SCp.phase |= syncneg;
1532 MSGOLEN += spi_populate_sync_msg(&MSGO(MSGOLEN), 50, 8);
1533 SYNCNEG=1; /* negotiation in progress */
1534 }
1535
1536 SETRATE(SYNCRATE);
1537}
1538
1539/*
1540 * Selection timeout
1541 * - return command to mid-level with failure cause
1542 *
1543 */
1544static void selto_run(struct Scsi_Host *shpnt)
1545{
1546 SETPORT(SCSISEQ, 0);
1547 SETPORT(SSTAT1, CLRSELTIMO);
1548
1549 if (!CURRENT_SC)
1550 return;
1551
1552 CURRENT_SC->SCp.phase &= ~selecting;
1553
1554 if (CURRENT_SC->SCp.phase & aborted)
1555 done(shpnt, DID_ABORT << 16);
1556 else if (TESTLO(SSTAT0, SELINGO))
1557 done(shpnt, DID_BUS_BUSY << 16);
1558 else
1559 /* ARBITRATION won, but SELECTION failed */
1560 done(shpnt, DID_NO_CONNECT << 16);
1561}
1562
1563/*
1564 * Selection in done
1565 * - put current command back to issue queue
1566 * (reconnection of a disconnected nexus instead
1567 * of successful selection out)
1568 *
1569 */
1570static void seldi_run(struct Scsi_Host *shpnt)
1571{
1572 int selid;
1573 int target;
1574 unsigned long flags;
1575
1576 SETPORT(SCSISIG, 0);
1577 SETPORT(SSTAT0, CLRSELDI);
1578 SETPORT(SSTAT1, CLRBUSFREE);
1579 SETPORT(SSTAT1, CLRPHASECHG);
1580
1581 if(CURRENT_SC) {
1582 if(!(CURRENT_SC->SCp.phase & not_issued))
1583 scmd_printk(KERN_ERR, CURRENT_SC,
1584 "command should not have been issued yet\n");
1585
1586 DO_LOCK(flags);
1587 append_SC(&ISSUE_SC, CURRENT_SC);
1588 DO_UNLOCK(flags);
1589
1590 CURRENT_SC = NULL;
1591 }
1592
1593 if (!DISCONNECTED_SC)
1594 return;
1595
1596 RECONN_TARGET=-1;
1597
1598 selid = GETPORT(SELID) & ~(1 << shpnt->this_id);
1599
1600 if (selid==0) {
1601 shost_printk(KERN_INFO, shpnt,
1602 "target id unknown (%02x)\n", selid);
1603 return;
1604 }
1605
1606 for(target=7; !(selid & (1 << target)); target--)
1607 ;
1608
1609 if(selid & ~(1 << target)) {
1610 shost_printk(KERN_INFO, shpnt,
1611 "multiple targets reconnected (%02x)\n", selid);
1612 }
1613
1614
1615 SETPORT(SCSIID, (shpnt->this_id << OID_) | target);
1616 SETPORT(SCSISEQ, 0);
1617
1618 SETRATE(HOSTDATA(shpnt)->syncrate[target]);
1619
1620 RECONN_TARGET=target;
1621}
1622
1623/*
1624 * message in phase
1625 * - handle initial message after reconnection to identify
1626 * reconnecting nexus
1627 * - queue command on DISCONNECTED_SC on DISCONNECT message
1628 * - set completed flag on COMMAND COMPLETE
1629 * (other completition code moved to busfree_run)
1630 * - handle response to SDTR
1631 * - clear synchronous transfer agreements on BUS RESET
1632 *
1633 * FIXME: what about SAVE POINTERS, RESTORE POINTERS?
1634 *
1635 */
1636static void msgi_run(struct Scsi_Host *shpnt)
1637{
1638 for(;;) {
1639 int sstat1 = GETPORT(SSTAT1);
1640
1641 if(sstat1 & (PHASECHG|PHASEMIS|BUSFREE) || !(sstat1 & REQINIT))
1642 return;
1643
1644 if (TESTLO(SSTAT0, SPIORDY))
1645 return;
1646
1647 ADDMSGI(GETPORT(SCSIDAT));
1648
1649 if(!CURRENT_SC) {
1650 if(LASTSTATE!=seldi) {
1651 shost_printk(KERN_ERR, shpnt,
1652 "message in w/o current command"
1653 " not after reselection\n");
1654 }
1655
1656 /*
1657 * Handle reselection
1658 */
1659 if(!(MSGI(0) & IDENTIFY_BASE)) {
1660 shost_printk(KERN_ERR, shpnt,
1661 "target didn't identify after reselection\n");
1662 continue;
1663 }
1664
1665 CURRENT_SC = remove_lun_SC(&DISCONNECTED_SC, RECONN_TARGET, MSGI(0) & 0x3f);
1666
1667 if (!CURRENT_SC) {
1668 show_queues(shpnt);
1669 shost_printk(KERN_ERR, shpnt,
1670 "no disconnected command"
1671 " for target %d/%d\n",
1672 RECONN_TARGET, MSGI(0) & 0x3f);
1673 continue;
1674 }
1675
1676 CURRENT_SC->SCp.Message = MSGI(0);
1677 CURRENT_SC->SCp.phase &= ~disconnected;
1678
1679 MSGILEN=0;
1680
1681 /* next message if any */
1682 continue;
1683 }
1684
1685 CURRENT_SC->SCp.Message = MSGI(0);
1686
1687 switch (MSGI(0)) {
1688 case DISCONNECT:
1689 if (!RECONNECT)
1690 scmd_printk(KERN_WARNING, CURRENT_SC,
1691 "target was not allowed to disconnect\n");
1692
1693 CURRENT_SC->SCp.phase |= disconnected;
1694 break;
1695
1696 case COMMAND_COMPLETE:
1697 CURRENT_SC->SCp.phase |= completed;
1698 break;
1699
1700 case MESSAGE_REJECT:
1701 if (SYNCNEG==1) {
1702 scmd_printk(KERN_INFO, CURRENT_SC,
1703 "Synchronous Data Transfer Request"
1704 " was rejected\n");
1705 SYNCNEG=2; /* negotiation completed */
1706 } else
1707 scmd_printk(KERN_INFO, CURRENT_SC,
1708 "inbound message (MESSAGE REJECT)\n");
1709 break;
1710
1711 case SAVE_POINTERS:
1712 break;
1713
1714 case RESTORE_POINTERS:
1715 break;
1716
1717 case EXTENDED_MESSAGE:
1718 if(MSGILEN<2 || MSGILEN<MSGI(1)+2) {
1719 /* not yet completed */
1720 continue;
1721 }
1722
1723 switch (MSGI(2)) {
1724 case EXTENDED_SDTR:
1725 {
1726 long ticks;
1727
1728 if (MSGI(1) != 3) {
1729 scmd_printk(KERN_ERR, CURRENT_SC,
1730 "SDTR message length!=3\n");
1731 break;
1732 }
1733
1734 if (!HOSTDATA(shpnt)->synchronous)
1735 break;
1736
1737 printk(INFO_LEAD, CMDINFO(CURRENT_SC));
1738 spi_print_msg(&MSGI(0));
1739 printk("\n");
1740
1741 ticks = (MSGI(3) * 4 + 49) / 50;
1742
1743 if (syncneg) {
1744 /* negotiation in progress */
1745 if (ticks > 9 || MSGI(4) < 1 || MSGI(4) > 8) {
1746 ADDMSGO(MESSAGE_REJECT);
1747 scmd_printk(KERN_INFO,
1748 CURRENT_SC,
1749 "received Synchronous Data Transfer Request invalid - rejected\n");
1750 break;
1751 }
1752
1753 SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
1754 } else if (ticks <= 9 && MSGI(4) >= 1) {
1755 ADDMSGO(EXTENDED_MESSAGE);
1756 ADDMSGO(3);
1757 ADDMSGO(EXTENDED_SDTR);
1758 if (ticks < 4) {
1759 ticks = 4;
1760 ADDMSGO(50);
1761 } else
1762 ADDMSGO(MSGI(3));
1763
1764 if (MSGI(4) > 8)
1765 MSGI(4) = 8;
1766
1767 ADDMSGO(MSGI(4));
1768
1769 SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
1770 } else {
1771 /* requested SDTR is too slow, do it asynchronously */
1772 scmd_printk(KERN_INFO,
1773 CURRENT_SC,
1774 "Synchronous Data Transfer Request too slow - Rejecting\n");
1775 ADDMSGO(MESSAGE_REJECT);
1776 }
1777
1778 /* negotiation completed */
1779 SYNCNEG=2;
1780 SETRATE(SYNCRATE);
1781 }
1782 break;
1783
1784 case BUS_DEVICE_RESET:
1785 {
1786 int i;
1787
1788 for(i=0; i<8; i++) {
1789 HOSTDATA(shpnt)->syncrate[i]=0;
1790 HOSTDATA(shpnt)->syncneg[i]=0;
1791 }
1792
1793 }
1794 break;
1795
1796 case EXTENDED_MODIFY_DATA_POINTER:
1797 case EXTENDED_EXTENDED_IDENTIFY:
1798 case EXTENDED_WDTR:
1799 default:
1800 ADDMSGO(MESSAGE_REJECT);
1801 break;
1802 }
1803 break;
1804 }
1805
1806 MSGILEN=0;
1807 }
1808}
1809
1810static void msgi_end(struct Scsi_Host *shpnt)
1811{
1812 if(MSGILEN>0)
1813 scmd_printk(KERN_WARNING, CURRENT_SC,
1814 "target left before message completed (%d)\n",
1815 MSGILEN);
1816
1817 if (MSGOLEN > 0 && !(GETPORT(SSTAT1) & BUSFREE))
1818 SETPORT(SCSISIG, P_MSGI | SIG_ATNO);
1819}
1820
1821/*
1822 * message out phase
1823 *
1824 */
1825static void msgo_init(struct Scsi_Host *shpnt)
1826{
1827 if(MSGOLEN==0) {
1828 if((CURRENT_SC->SCp.phase & syncneg) && SYNCNEG==2 && SYNCRATE==0) {
1829 ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
1830 } else {
1831 scmd_printk(KERN_INFO, CURRENT_SC,
1832 "unexpected MESSAGE OUT phase; rejecting\n");
1833 ADDMSGO(MESSAGE_REJECT);
1834 }
1835 }
1836
1837}
1838
1839/*
1840 * message out phase
1841 *
1842 */
1843static void msgo_run(struct Scsi_Host *shpnt)
1844{
1845 while(MSGO_I<MSGOLEN) {
1846 if (TESTLO(SSTAT0, SPIORDY))
1847 return;
1848
1849 if (MSGO_I==MSGOLEN-1) {
1850 /* Leave MESSAGE OUT after transfer */
1851 SETPORT(SSTAT1, CLRATNO);
1852 }
1853
1854
1855 if (MSGO(MSGO_I) & IDENTIFY_BASE)
1856 CURRENT_SC->SCp.phase |= identified;
1857
1858 if (MSGO(MSGO_I)==ABORT)
1859 CURRENT_SC->SCp.phase |= aborted;
1860
1861 if (MSGO(MSGO_I)==BUS_DEVICE_RESET)
1862 CURRENT_SC->SCp.phase |= resetted;
1863
1864 SETPORT(SCSIDAT, MSGO(MSGO_I++));
1865 }
1866}
1867
1868static void msgo_end(struct Scsi_Host *shpnt)
1869{
1870 if(MSGO_I<MSGOLEN) {
1871 scmd_printk(KERN_ERR, CURRENT_SC,
1872 "message sent incompletely (%d/%d)\n",
1873 MSGO_I, MSGOLEN);
1874 if(SYNCNEG==1) {
1875 scmd_printk(KERN_INFO, CURRENT_SC,
1876 "Synchronous Data Transfer Request was rejected\n");
1877 SYNCNEG=2;
1878 }
1879 }
1880
1881 MSGO_I = 0;
1882 MSGOLEN = 0;
1883}
1884
1885/*
1886 * command phase
1887 *
1888 */
1889static void cmd_init(struct Scsi_Host *shpnt)
1890{
1891 if (CURRENT_SC->SCp.sent_command) {
1892 scmd_printk(KERN_ERR, CURRENT_SC,
1893 "command already sent\n");
1894 done(shpnt, DID_ERROR << 16);
1895 return;
1896 }
1897
1898 CMD_I=0;
1899}
1900
1901/*
1902 * command phase
1903 *
1904 */
1905static void cmd_run(struct Scsi_Host *shpnt)
1906{
1907 while(CMD_I<CURRENT_SC->cmd_len) {
1908 if (TESTLO(SSTAT0, SPIORDY))
1909 return;
1910
1911 SETPORT(SCSIDAT, CURRENT_SC->cmnd[CMD_I++]);
1912 }
1913}
1914
1915static void cmd_end(struct Scsi_Host *shpnt)
1916{
1917 if(CMD_I<CURRENT_SC->cmd_len)
1918 scmd_printk(KERN_ERR, CURRENT_SC,
1919 "command sent incompletely (%d/%d)\n",
1920 CMD_I, CURRENT_SC->cmd_len);
1921 else
1922 CURRENT_SC->SCp.sent_command++;
1923}
1924
1925/*
1926 * status phase
1927 *
1928 */
1929static void status_run(struct Scsi_Host *shpnt)
1930{
1931 if (TESTLO(SSTAT0, SPIORDY))
1932 return;
1933
1934 CURRENT_SC->SCp.Status = GETPORT(SCSIDAT);
1935
1936}
1937
1938/*
1939 * data in phase
1940 *
1941 */
1942static void datai_init(struct Scsi_Host *shpnt)
1943{
1944 SETPORT(DMACNTRL0, RSTFIFO);
1945 SETPORT(DMACNTRL0, RSTFIFO|ENDMA);
1946
1947 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
1948 SETPORT(SXFRCTL0, CH1|SCSIEN|DMAEN);
1949
1950 SETPORT(SIMODE0, 0);
1951 SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE);
1952
1953 DATA_LEN=0;
1954}
1955
1956static void datai_run(struct Scsi_Host *shpnt)
1957{
1958 unsigned long the_time;
1959 int fifodata, data_count;
1960
1961 /*
1962 * loop while the phase persists or the fifos are not empty
1963 *
1964 */
1965 while(TESTLO(DMASTAT, INTSTAT) || TESTLO(DMASTAT, DFIFOEMP) || TESTLO(SSTAT2, SEMPTY)) {
1966 /* FIXME: maybe this should be done by setting up
1967 * STCNT to trigger ENSWRAP interrupt, instead of
1968 * polling for DFIFOFULL
1969 */
1970 the_time=jiffies + 100*HZ;
1971 while(TESTLO(DMASTAT, DFIFOFULL|INTSTAT) && time_before(jiffies,the_time))
1972 barrier();
1973
1974 if(TESTLO(DMASTAT, DFIFOFULL|INTSTAT)) {
1975 scmd_printk(KERN_ERR, CURRENT_SC, "datai timeout\n");
1976 break;
1977 }
1978
1979 if(TESTHI(DMASTAT, DFIFOFULL)) {
1980 fifodata = 128;
1981 } else {
1982 the_time=jiffies + 100*HZ;
1983 while(TESTLO(SSTAT2, SEMPTY) && time_before(jiffies,the_time))
1984 barrier();
1985
1986 if(TESTLO(SSTAT2, SEMPTY)) {
1987 scmd_printk(KERN_ERR, CURRENT_SC,
1988 "datai sempty timeout");
1989 break;
1990 }
1991
1992 fifodata = GETPORT(FIFOSTAT);
1993 }
1994
1995 if(CURRENT_SC->SCp.this_residual>0) {
1996 while(fifodata>0 && CURRENT_SC->SCp.this_residual>0) {
1997 data_count = fifodata > CURRENT_SC->SCp.this_residual ?
1998 CURRENT_SC->SCp.this_residual :
1999 fifodata;
2000 fifodata -= data_count;
2001
2002 if (data_count & 1) {
2003 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2004 *CURRENT_SC->SCp.ptr++ = GETPORT(DATAPORT);
2005 CURRENT_SC->SCp.this_residual--;
2006 DATA_LEN++;
2007 SETPORT(DMACNTRL0, ENDMA);
2008 }
2009
2010 if (data_count > 1) {
2011 data_count >>= 1;
2012 insw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
2013 CURRENT_SC->SCp.ptr += 2 * data_count;
2014 CURRENT_SC->SCp.this_residual -= 2 * data_count;
2015 DATA_LEN += 2 * data_count;
2016 }
2017
2018 if (CURRENT_SC->SCp.this_residual == 0 &&
2019 !sg_is_last(CURRENT_SC->SCp.buffer)) {
2020 /* advance to next buffer */
2021 CURRENT_SC->SCp.buffer = sg_next(CURRENT_SC->SCp.buffer);
2022 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
2023 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
2024 }
2025 }
2026 } else if (fifodata > 0) {
2027 scmd_printk(KERN_ERR, CURRENT_SC,
2028 "no buffers left for %d(%d) bytes"
2029 " (data overrun!?)\n",
2030 fifodata, GETPORT(FIFOSTAT));
2031 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2032 while(fifodata>0) {
2033 GETPORT(DATAPORT);
2034 fifodata--;
2035 DATA_LEN++;
2036 }
2037 SETPORT(DMACNTRL0, ENDMA|_8BIT);
2038 }
2039 }
2040
2041 if(TESTLO(DMASTAT, INTSTAT) ||
2042 TESTLO(DMASTAT, DFIFOEMP) ||
2043 TESTLO(SSTAT2, SEMPTY) ||
2044 GETPORT(FIFOSTAT)>0) {
2045 /*
2046 * something went wrong, if there's something left in the fifos
2047 * or the phase didn't change
2048 */
2049 scmd_printk(KERN_ERR, CURRENT_SC,
2050 "fifos should be empty and phase should have changed\n");
2051 }
2052
2053 if(DATA_LEN!=GETSTCNT()) {
2054 scmd_printk(KERN_ERR, CURRENT_SC,
2055 "manual transfer count differs from automatic "
2056 "(count=%d;stcnt=%d;diff=%d;fifostat=%d)",
2057 DATA_LEN, GETSTCNT(), GETSTCNT()-DATA_LEN,
2058 GETPORT(FIFOSTAT));
2059 mdelay(10000);
2060 }
2061}
2062
2063static void datai_end(struct Scsi_Host *shpnt)
2064{
2065 CMD_INC_RESID(CURRENT_SC, -GETSTCNT());
2066
2067 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2068 SETPORT(DMACNTRL0, 0);
2069}
2070
2071/*
2072 * data out phase
2073 *
2074 */
2075static void datao_init(struct Scsi_Host *shpnt)
2076{
2077 SETPORT(DMACNTRL0, WRITE_READ | RSTFIFO);
2078 SETPORT(DMACNTRL0, WRITE_READ | ENDMA);
2079
2080 SETPORT(SXFRCTL0, CH1|CLRSTCNT);
2081 SETPORT(SXFRCTL0, CH1|SCSIEN|DMAEN);
2082
2083 SETPORT(SIMODE0, 0);
2084 SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE );
2085
2086 DATA_LEN = scsi_get_resid(CURRENT_SC);
2087}
2088
2089static void datao_run(struct Scsi_Host *shpnt)
2090{
2091 unsigned long the_time;
2092 int data_count;
2093
2094 /* until phase changes or all data sent */
2095 while(TESTLO(DMASTAT, INTSTAT) && CURRENT_SC->SCp.this_residual>0) {
2096 data_count = 128;
2097 if(data_count > CURRENT_SC->SCp.this_residual)
2098 data_count=CURRENT_SC->SCp.this_residual;
2099
2100 if(TESTLO(DMASTAT, DFIFOEMP)) {
2101 scmd_printk(KERN_ERR, CURRENT_SC,
2102 "datao fifo not empty (%d)",
2103 GETPORT(FIFOSTAT));
2104 break;
2105 }
2106
2107 if(data_count & 1) {
2108 SETPORT(DMACNTRL0,WRITE_READ|ENDMA|_8BIT);
2109 SETPORT(DATAPORT, *CURRENT_SC->SCp.ptr++);
2110 CURRENT_SC->SCp.this_residual--;
2111 CMD_INC_RESID(CURRENT_SC, -1);
2112 SETPORT(DMACNTRL0,WRITE_READ|ENDMA);
2113 }
2114
2115 if(data_count > 1) {
2116 data_count >>= 1;
2117 outsw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
2118 CURRENT_SC->SCp.ptr += 2 * data_count;
2119 CURRENT_SC->SCp.this_residual -= 2 * data_count;
2120 CMD_INC_RESID(CURRENT_SC, -2 * data_count);
2121 }
2122
2123 if (CURRENT_SC->SCp.this_residual == 0 &&
2124 !sg_is_last(CURRENT_SC->SCp.buffer)) {
2125 /* advance to next buffer */
2126 CURRENT_SC->SCp.buffer = sg_next(CURRENT_SC->SCp.buffer);
2127 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
2128 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
2129 }
2130
2131 the_time=jiffies + 100*HZ;
2132 while(TESTLO(DMASTAT, DFIFOEMP|INTSTAT) && time_before(jiffies,the_time))
2133 barrier();
2134
2135 if(TESTLO(DMASTAT, DFIFOEMP|INTSTAT)) {
2136 scmd_printk(KERN_ERR, CURRENT_SC, "dataout timeout\n");
2137 break;
2138 }
2139 }
2140}
2141
2142static void datao_end(struct Scsi_Host *shpnt)
2143{
2144 if(TESTLO(DMASTAT, DFIFOEMP)) {
2145 u32 datao_cnt = GETSTCNT();
2146 int datao_out = DATA_LEN - scsi_get_resid(CURRENT_SC);
2147 int done;
2148 struct scatterlist *sg = scsi_sglist(CURRENT_SC);
2149
2150 CMD_INC_RESID(CURRENT_SC, datao_out - datao_cnt);
2151
2152 done = scsi_bufflen(CURRENT_SC) - scsi_get_resid(CURRENT_SC);
2153 /* Locate the first SG entry not yet sent */
2154 while (done > 0 && !sg_is_last(sg)) {
2155 if (done < sg->length)
2156 break;
2157 done -= sg->length;
2158 sg = sg_next(sg);
2159 }
2160
2161 CURRENT_SC->SCp.buffer = sg;
2162 CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) + done;
2163 CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length -
2164 done;
2165 }
2166
2167 SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
2168 SETPORT(SXFRCTL0, CH1);
2169
2170 SETPORT(DMACNTRL0, 0);
2171}
2172
2173/*
2174 * figure out what state we're in
2175 *
2176 */
2177static int update_state(struct Scsi_Host *shpnt)
2178{
2179 int dataphase=0;
2180 unsigned int stat0 = GETPORT(SSTAT0);
2181 unsigned int stat1 = GETPORT(SSTAT1);
2182
2183 PREVSTATE = STATE;
2184 STATE=unknown;
2185
2186 if(stat1 & SCSIRSTI) {
2187 STATE=rsti;
2188 SETPORT(SCSISEQ,0);
2189 SETPORT(SSTAT1,SCSIRSTI);
2190 } else if (stat0 & SELDI && PREVSTATE == busfree) {
2191 STATE=seldi;
2192 } else if(stat0 & SELDO && CURRENT_SC && (CURRENT_SC->SCp.phase & selecting)) {
2193 STATE=seldo;
2194 } else if(stat1 & SELTO) {
2195 STATE=selto;
2196 } else if(stat1 & BUSFREE) {
2197 STATE=busfree;
2198 SETPORT(SSTAT1,BUSFREE);
2199 } else if(stat1 & SCSIPERR) {
2200 STATE=parerr;
2201 SETPORT(SSTAT1,SCSIPERR);
2202 } else if(stat1 & REQINIT) {
2203 switch(GETPORT(SCSISIG) & P_MASK) {
2204 case P_MSGI: STATE=msgi; break;
2205 case P_MSGO: STATE=msgo; break;
2206 case P_DATAO: STATE=datao; break;
2207 case P_DATAI: STATE=datai; break;
2208 case P_STATUS: STATE=status; break;
2209 case P_CMD: STATE=cmd; break;
2210 }
2211 dataphase=1;
2212 }
2213
2214 if((stat0 & SELDI) && STATE!=seldi && !dataphase) {
2215 scmd_printk(KERN_INFO, CURRENT_SC, "reselection missed?");
2216 }
2217
2218 if(STATE!=PREVSTATE) {
2219 LASTSTATE=PREVSTATE;
2220 }
2221
2222 return dataphase;
2223}
2224
2225/*
2226 * handle parity error
2227 *
2228 * FIXME: in which phase?
2229 *
2230 */
2231static void parerr_run(struct Scsi_Host *shpnt)
2232{
2233 scmd_printk(KERN_ERR, CURRENT_SC, "parity error\n");
2234 done(shpnt, DID_PARITY << 16);
2235}
2236
2237/*
2238 * handle reset in
2239 *
2240 */
2241static void rsti_run(struct Scsi_Host *shpnt)
2242{
2243 struct scsi_cmnd *ptr;
2244
2245 shost_printk(KERN_NOTICE, shpnt, "scsi reset in\n");
2246
2247 ptr=DISCONNECTED_SC;
2248 while(ptr) {
2249 struct scsi_cmnd *next = SCNEXT(ptr);
2250
2251 if (!ptr->device->soft_reset) {
2252 remove_SC(&DISCONNECTED_SC, ptr);
2253
2254 kfree(ptr->host_scribble);
2255 ptr->host_scribble=NULL;
2256
2257 ptr->result = DID_RESET << 16;
2258 ptr->scsi_done(ptr);
2259 }
2260
2261 ptr = next;
2262 }
2263
2264 if(CURRENT_SC && !CURRENT_SC->device->soft_reset)
2265 done(shpnt, DID_RESET << 16 );
2266}
2267
2268
2269/*
2270 * bottom-half handler
2271 *
2272 */
2273static void is_complete(struct Scsi_Host *shpnt)
2274{
2275 int dataphase;
2276 unsigned long flags;
2277 int pending;
2278
2279 if(!shpnt)
2280 return;
2281
2282 DO_LOCK(flags);
2283
2284 if( HOSTDATA(shpnt)->service==0 ) {
2285 DO_UNLOCK(flags);
2286 return;
2287 }
2288
2289 HOSTDATA(shpnt)->service = 0;
2290
2291 if(HOSTDATA(shpnt)->in_intr) {
2292 DO_UNLOCK(flags);
2293 /* aha152x_error never returns.. */
2294 aha152x_error(shpnt, "bottom-half already running!?");
2295 }
2296 HOSTDATA(shpnt)->in_intr++;
2297
2298 /*
2299 * loop while there are interrupt conditions pending
2300 *
2301 */
2302 do {
2303 unsigned long start = jiffies;
2304 DO_UNLOCK(flags);
2305
2306 dataphase=update_state(shpnt);
2307
2308 /*
2309 * end previous state
2310 *
2311 */
2312 if(PREVSTATE!=STATE && states[PREVSTATE].end)
2313 states[PREVSTATE].end(shpnt);
2314
2315 /*
2316 * disable SPIO mode if previous phase used it
2317 * and this one doesn't
2318 *
2319 */
2320 if(states[PREVSTATE].spio && !states[STATE].spio) {
2321 SETPORT(SXFRCTL0, CH1);
2322 SETPORT(DMACNTRL0, 0);
2323 if(CURRENT_SC)
2324 CURRENT_SC->SCp.phase &= ~spiordy;
2325 }
2326
2327 /*
2328 * accept current dataphase phase
2329 *
2330 */
2331 if(dataphase) {
2332 SETPORT(SSTAT0, REQINIT);
2333 SETPORT(SCSISIG, GETPORT(SCSISIG) & P_MASK);
2334 SETPORT(SSTAT1, PHASECHG);
2335 }
2336
2337 /*
2338 * enable SPIO mode if previous didn't use it
2339 * and this one does
2340 *
2341 */
2342 if(!states[PREVSTATE].spio && states[STATE].spio) {
2343 SETPORT(DMACNTRL0, 0);
2344 SETPORT(SXFRCTL0, CH1|SPIOEN);
2345 if(CURRENT_SC)
2346 CURRENT_SC->SCp.phase |= spiordy;
2347 }
2348
2349 /*
2350 * initialize for new state
2351 *
2352 */
2353 if(PREVSTATE!=STATE && states[STATE].init)
2354 states[STATE].init(shpnt);
2355
2356 /*
2357 * handle current state
2358 *
2359 */
2360 if(states[STATE].run)
2361 states[STATE].run(shpnt);
2362 else
2363 scmd_printk(KERN_ERR, CURRENT_SC,
2364 "unexpected state (%x)\n", STATE);
2365
2366 /*
2367 * setup controller to interrupt on
2368 * the next expected condition and
2369 * loop if it's already there
2370 *
2371 */
2372 DO_LOCK(flags);
2373 pending=setup_expected_interrupts(shpnt);
2374#if defined(AHA152X_STAT)
2375 HOSTDATA(shpnt)->count[STATE]++;
2376 if(PREVSTATE!=STATE)
2377 HOSTDATA(shpnt)->count_trans[STATE]++;
2378 HOSTDATA(shpnt)->time[STATE] += jiffies-start;
2379#endif
2380
2381 } while(pending);
2382
2383 /*
2384 * enable interrupts and leave bottom-half
2385 *
2386 */
2387 HOSTDATA(shpnt)->in_intr--;
2388 SETBITS(DMACNTRL0, INTEN);
2389 DO_UNLOCK(flags);
2390}
2391
2392
2393/*
2394 * Dump the current driver status and panic
2395 */
2396static void aha152x_error(struct Scsi_Host *shpnt, char *msg)
2397{
2398 shost_printk(KERN_EMERG, shpnt, "%s\n", msg);
2399 show_queues(shpnt);
2400 panic("aha152x panic\n");
2401}
2402
2403/*
2404 * display enabled interrupts
2405 */
2406static void disp_enintr(struct Scsi_Host *shpnt)
2407{
2408 int s0, s1;
2409
2410 s0 = GETPORT(SIMODE0);
2411 s1 = GETPORT(SIMODE1);
2412
2413 shost_printk(KERN_DEBUG, shpnt,
2414 "enabled interrupts (%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
2415 (s0 & ENSELDO) ? "ENSELDO " : "",
2416 (s0 & ENSELDI) ? "ENSELDI " : "",
2417 (s0 & ENSELINGO) ? "ENSELINGO " : "",
2418 (s0 & ENSWRAP) ? "ENSWRAP " : "",
2419 (s0 & ENSDONE) ? "ENSDONE " : "",
2420 (s0 & ENSPIORDY) ? "ENSPIORDY " : "",
2421 (s0 & ENDMADONE) ? "ENDMADONE " : "",
2422 (s1 & ENSELTIMO) ? "ENSELTIMO " : "",
2423 (s1 & ENATNTARG) ? "ENATNTARG " : "",
2424 (s1 & ENPHASEMIS) ? "ENPHASEMIS " : "",
2425 (s1 & ENBUSFREE) ? "ENBUSFREE " : "",
2426 (s1 & ENSCSIPERR) ? "ENSCSIPERR " : "",
2427 (s1 & ENPHASECHG) ? "ENPHASECHG " : "",
2428 (s1 & ENREQINIT) ? "ENREQINIT " : "");
2429}
2430
2431/*
2432 * Show the command data of a command
2433 */
2434static void show_command(struct scsi_cmnd *ptr)
2435{
2436 scsi_print_command(ptr);
2437 scmd_printk(KERN_DEBUG, ptr,
2438 "request_bufflen=%d; resid=%d; "
2439 "phase |%s%s%s%s%s%s%s%s%s; next=0x%p",
2440 scsi_bufflen(ptr), scsi_get_resid(ptr),
2441 (ptr->SCp.phase & not_issued) ? "not issued|" : "",
2442 (ptr->SCp.phase & selecting) ? "selecting|" : "",
2443 (ptr->SCp.phase & identified) ? "identified|" : "",
2444 (ptr->SCp.phase & disconnected) ? "disconnected|" : "",
2445 (ptr->SCp.phase & completed) ? "completed|" : "",
2446 (ptr->SCp.phase & spiordy) ? "spiordy|" : "",
2447 (ptr->SCp.phase & syncneg) ? "syncneg|" : "",
2448 (ptr->SCp.phase & aborted) ? "aborted|" : "",
2449 (ptr->SCp.phase & resetted) ? "resetted|" : "",
2450 (SCDATA(ptr)) ? SCNEXT(ptr) : NULL);
2451}
2452
2453/*
2454 * Dump the queued data
2455 */
2456static void show_queues(struct Scsi_Host *shpnt)
2457{
2458 struct scsi_cmnd *ptr;
2459 unsigned long flags;
2460
2461 DO_LOCK(flags);
2462 printk(KERN_DEBUG "\nqueue status:\nissue_SC:\n");
2463 for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
2464 show_command(ptr);
2465 DO_UNLOCK(flags);
2466
2467 printk(KERN_DEBUG "current_SC:\n");
2468 if (CURRENT_SC)
2469 show_command(CURRENT_SC);
2470 else
2471 printk(KERN_DEBUG "none\n");
2472
2473 printk(KERN_DEBUG "disconnected_SC:\n");
2474 for (ptr = DISCONNECTED_SC; ptr; ptr = SCDATA(ptr) ? SCNEXT(ptr) : NULL)
2475 show_command(ptr);
2476
2477 disp_enintr(shpnt);
2478}
2479
2480static void get_command(struct seq_file *m, struct scsi_cmnd * ptr)
2481{
2482 int i;
2483
2484 seq_printf(m, "%p: target=%d; lun=%d; cmnd=( ",
2485 ptr, ptr->device->id, (u8)ptr->device->lun);
2486
2487 for (i = 0; i < COMMAND_SIZE(ptr->cmnd[0]); i++)
2488 seq_printf(m, "0x%02x ", ptr->cmnd[i]);
2489
2490 seq_printf(m, "); resid=%d; residual=%d; buffers=%d; phase |",
2491 scsi_get_resid(ptr), ptr->SCp.this_residual,
2492 sg_nents(ptr->SCp.buffer) - 1);
2493
2494 if (ptr->SCp.phase & not_issued)
2495 seq_puts(m, "not issued|");
2496 if (ptr->SCp.phase & selecting)
2497 seq_puts(m, "selecting|");
2498 if (ptr->SCp.phase & disconnected)
2499 seq_puts(m, "disconnected|");
2500 if (ptr->SCp.phase & aborted)
2501 seq_puts(m, "aborted|");
2502 if (ptr->SCp.phase & identified)
2503 seq_puts(m, "identified|");
2504 if (ptr->SCp.phase & completed)
2505 seq_puts(m, "completed|");
2506 if (ptr->SCp.phase & spiordy)
2507 seq_puts(m, "spiordy|");
2508 if (ptr->SCp.phase & syncneg)
2509 seq_puts(m, "syncneg|");
2510 seq_printf(m, "; next=0x%p\n", SCNEXT(ptr));
2511}
2512
2513static void get_ports(struct seq_file *m, struct Scsi_Host *shpnt)
2514{
2515 int s;
2516
2517 seq_printf(m, "\n%s: %s(%s) ", CURRENT_SC ? "on bus" : "waiting", states[STATE].name, states[PREVSTATE].name);
2518
2519 s = GETPORT(SCSISEQ);
2520 seq_puts(m, "SCSISEQ( ");
2521 if (s & TEMODEO)
2522 seq_puts(m, "TARGET MODE ");
2523 if (s & ENSELO)
2524 seq_puts(m, "SELO ");
2525 if (s & ENSELI)
2526 seq_puts(m, "SELI ");
2527 if (s & ENRESELI)
2528 seq_puts(m, "RESELI ");
2529 if (s & ENAUTOATNO)
2530 seq_puts(m, "AUTOATNO ");
2531 if (s & ENAUTOATNI)
2532 seq_puts(m, "AUTOATNI ");
2533 if (s & ENAUTOATNP)
2534 seq_puts(m, "AUTOATNP ");
2535 if (s & SCSIRSTO)
2536 seq_puts(m, "SCSIRSTO ");
2537 seq_puts(m, ");");
2538
2539 seq_puts(m, " SCSISIG(");
2540 s = GETPORT(SCSISIG);
2541 switch (s & P_MASK) {
2542 case P_DATAO:
2543 seq_puts(m, "DATA OUT");
2544 break;
2545 case P_DATAI:
2546 seq_puts(m, "DATA IN");
2547 break;
2548 case P_CMD:
2549 seq_puts(m, "COMMAND");
2550 break;
2551 case P_STATUS:
2552 seq_puts(m, "STATUS");
2553 break;
2554 case P_MSGO:
2555 seq_puts(m, "MESSAGE OUT");
2556 break;
2557 case P_MSGI:
2558 seq_puts(m, "MESSAGE IN");
2559 break;
2560 default:
2561 seq_puts(m, "*invalid*");
2562 break;
2563 }
2564
2565 seq_puts(m, "); ");
2566
2567 seq_printf(m, "INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
2568
2569 seq_puts(m, "SSTAT( ");
2570 s = GETPORT(SSTAT0);
2571 if (s & TARGET)
2572 seq_puts(m, "TARGET ");
2573 if (s & SELDO)
2574 seq_puts(m, "SELDO ");
2575 if (s & SELDI)
2576 seq_puts(m, "SELDI ");
2577 if (s & SELINGO)
2578 seq_puts(m, "SELINGO ");
2579 if (s & SWRAP)
2580 seq_puts(m, "SWRAP ");
2581 if (s & SDONE)
2582 seq_puts(m, "SDONE ");
2583 if (s & SPIORDY)
2584 seq_puts(m, "SPIORDY ");
2585 if (s & DMADONE)
2586 seq_puts(m, "DMADONE ");
2587
2588 s = GETPORT(SSTAT1);
2589 if (s & SELTO)
2590 seq_puts(m, "SELTO ");
2591 if (s & ATNTARG)
2592 seq_puts(m, "ATNTARG ");
2593 if (s & SCSIRSTI)
2594 seq_puts(m, "SCSIRSTI ");
2595 if (s & PHASEMIS)
2596 seq_puts(m, "PHASEMIS ");
2597 if (s & BUSFREE)
2598 seq_puts(m, "BUSFREE ");
2599 if (s & SCSIPERR)
2600 seq_puts(m, "SCSIPERR ");
2601 if (s & PHASECHG)
2602 seq_puts(m, "PHASECHG ");
2603 if (s & REQINIT)
2604 seq_puts(m, "REQINIT ");
2605 seq_puts(m, "); ");
2606
2607
2608 seq_puts(m, "SSTAT( ");
2609
2610 s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
2611
2612 if (s & TARGET)
2613 seq_puts(m, "TARGET ");
2614 if (s & SELDO)
2615 seq_puts(m, "SELDO ");
2616 if (s & SELDI)
2617 seq_puts(m, "SELDI ");
2618 if (s & SELINGO)
2619 seq_puts(m, "SELINGO ");
2620 if (s & SWRAP)
2621 seq_puts(m, "SWRAP ");
2622 if (s & SDONE)
2623 seq_puts(m, "SDONE ");
2624 if (s & SPIORDY)
2625 seq_puts(m, "SPIORDY ");
2626 if (s & DMADONE)
2627 seq_puts(m, "DMADONE ");
2628
2629 s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
2630
2631 if (s & SELTO)
2632 seq_puts(m, "SELTO ");
2633 if (s & ATNTARG)
2634 seq_puts(m, "ATNTARG ");
2635 if (s & SCSIRSTI)
2636 seq_puts(m, "SCSIRSTI ");
2637 if (s & PHASEMIS)
2638 seq_puts(m, "PHASEMIS ");
2639 if (s & BUSFREE)
2640 seq_puts(m, "BUSFREE ");
2641 if (s & SCSIPERR)
2642 seq_puts(m, "SCSIPERR ");
2643 if (s & PHASECHG)
2644 seq_puts(m, "PHASECHG ");
2645 if (s & REQINIT)
2646 seq_puts(m, "REQINIT ");
2647 seq_puts(m, "); ");
2648
2649 seq_puts(m, "SXFRCTL0( ");
2650
2651 s = GETPORT(SXFRCTL0);
2652 if (s & SCSIEN)
2653 seq_puts(m, "SCSIEN ");
2654 if (s & DMAEN)
2655 seq_puts(m, "DMAEN ");
2656 if (s & CH1)
2657 seq_puts(m, "CH1 ");
2658 if (s & CLRSTCNT)
2659 seq_puts(m, "CLRSTCNT ");
2660 if (s & SPIOEN)
2661 seq_puts(m, "SPIOEN ");
2662 if (s & CLRCH1)
2663 seq_puts(m, "CLRCH1 ");
2664 seq_puts(m, "); ");
2665
2666 seq_puts(m, "SIGNAL( ");
2667
2668 s = GETPORT(SCSISIG);
2669 if (s & SIG_ATNI)
2670 seq_puts(m, "ATNI ");
2671 if (s & SIG_SELI)
2672 seq_puts(m, "SELI ");
2673 if (s & SIG_BSYI)
2674 seq_puts(m, "BSYI ");
2675 if (s & SIG_REQI)
2676 seq_puts(m, "REQI ");
2677 if (s & SIG_ACKI)
2678 seq_puts(m, "ACKI ");
2679 seq_puts(m, "); ");
2680
2681 seq_printf(m, "SELID(%02x), ", GETPORT(SELID));
2682
2683 seq_printf(m, "STCNT(%d), ", GETSTCNT());
2684
2685 seq_puts(m, "SSTAT2( ");
2686
2687 s = GETPORT(SSTAT2);
2688 if (s & SOFFSET)
2689 seq_puts(m, "SOFFSET ");
2690 if (s & SEMPTY)
2691 seq_puts(m, "SEMPTY ");
2692 if (s & SFULL)
2693 seq_puts(m, "SFULL ");
2694 seq_printf(m, "); SFCNT (%d); ", s & (SFULL | SFCNT));
2695
2696 s = GETPORT(SSTAT3);
2697 seq_printf(m, "SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
2698
2699 seq_puts(m, "SSTAT4( ");
2700 s = GETPORT(SSTAT4);
2701 if (s & SYNCERR)
2702 seq_puts(m, "SYNCERR ");
2703 if (s & FWERR)
2704 seq_puts(m, "FWERR ");
2705 if (s & FRERR)
2706 seq_puts(m, "FRERR ");
2707 seq_puts(m, "); ");
2708
2709 seq_puts(m, "DMACNTRL0( ");
2710 s = GETPORT(DMACNTRL0);
2711 seq_printf(m, "%s ", s & _8BIT ? "8BIT" : "16BIT");
2712 seq_printf(m, "%s ", s & DMA ? "DMA" : "PIO");
2713 seq_printf(m, "%s ", s & WRITE_READ ? "WRITE" : "READ");
2714 if (s & ENDMA)
2715 seq_puts(m, "ENDMA ");
2716 if (s & INTEN)
2717 seq_puts(m, "INTEN ");
2718 if (s & RSTFIFO)
2719 seq_puts(m, "RSTFIFO ");
2720 if (s & SWINT)
2721 seq_puts(m, "SWINT ");
2722 seq_puts(m, "); ");
2723
2724 seq_puts(m, "DMASTAT( ");
2725 s = GETPORT(DMASTAT);
2726 if (s & ATDONE)
2727 seq_puts(m, "ATDONE ");
2728 if (s & WORDRDY)
2729 seq_puts(m, "WORDRDY ");
2730 if (s & DFIFOFULL)
2731 seq_puts(m, "DFIFOFULL ");
2732 if (s & DFIFOEMP)
2733 seq_puts(m, "DFIFOEMP ");
2734 seq_puts(m, ")\n");
2735
2736 seq_puts(m, "enabled interrupts( ");
2737
2738 s = GETPORT(SIMODE0);
2739 if (s & ENSELDO)
2740 seq_puts(m, "ENSELDO ");
2741 if (s & ENSELDI)
2742 seq_puts(m, "ENSELDI ");
2743 if (s & ENSELINGO)
2744 seq_puts(m, "ENSELINGO ");
2745 if (s & ENSWRAP)
2746 seq_puts(m, "ENSWRAP ");
2747 if (s & ENSDONE)
2748 seq_puts(m, "ENSDONE ");
2749 if (s & ENSPIORDY)
2750 seq_puts(m, "ENSPIORDY ");
2751 if (s & ENDMADONE)
2752 seq_puts(m, "ENDMADONE ");
2753
2754 s = GETPORT(SIMODE1);
2755 if (s & ENSELTIMO)
2756 seq_puts(m, "ENSELTIMO ");
2757 if (s & ENATNTARG)
2758 seq_puts(m, "ENATNTARG ");
2759 if (s & ENPHASEMIS)
2760 seq_puts(m, "ENPHASEMIS ");
2761 if (s & ENBUSFREE)
2762 seq_puts(m, "ENBUSFREE ");
2763 if (s & ENSCSIPERR)
2764 seq_puts(m, "ENSCSIPERR ");
2765 if (s & ENPHASECHG)
2766 seq_puts(m, "ENPHASECHG ");
2767 if (s & ENREQINIT)
2768 seq_puts(m, "ENREQINIT ");
2769 seq_puts(m, ")\n");
2770}
2771
2772static int aha152x_set_info(struct Scsi_Host *shpnt, char *buffer, int length)
2773{
2774 if(!shpnt || !buffer || length<8 || strncmp("aha152x ", buffer, 8)!=0)
2775 return -EINVAL;
2776
2777#if defined(AHA152X_STAT)
2778 if(length>13 && strncmp("reset", buffer+8, 5)==0) {
2779 int i;
2780
2781 HOSTDATA(shpnt)->total_commands=0;
2782 HOSTDATA(shpnt)->disconnections=0;
2783 HOSTDATA(shpnt)->busfree_without_any_action=0;
2784 HOSTDATA(shpnt)->busfree_without_old_command=0;
2785 HOSTDATA(shpnt)->busfree_without_new_command=0;
2786 HOSTDATA(shpnt)->busfree_without_done_command=0;
2787 HOSTDATA(shpnt)->busfree_with_check_condition=0;
2788 for (i = idle; i<maxstate; i++) {
2789 HOSTDATA(shpnt)->count[i]=0;
2790 HOSTDATA(shpnt)->count_trans[i]=0;
2791 HOSTDATA(shpnt)->time[i]=0;
2792 }
2793
2794 shost_printk(KERN_INFO, shpnt, "aha152x: stats reset.\n");
2795
2796 } else
2797#endif
2798 {
2799 return -EINVAL;
2800 }
2801
2802
2803 return length;
2804}
2805
2806static int aha152x_show_info(struct seq_file *m, struct Scsi_Host *shpnt)
2807{
2808 int i;
2809 struct scsi_cmnd *ptr;
2810 unsigned long flags;
2811
2812 seq_puts(m, AHA152X_REVID "\n");
2813
2814 seq_printf(m, "ioports 0x%04lx to 0x%04lx\n",
2815 shpnt->io_port, shpnt->io_port + shpnt->n_io_port - 1);
2816 seq_printf(m, "interrupt 0x%02x\n", shpnt->irq);
2817 seq_printf(m, "disconnection/reconnection %s\n",
2818 RECONNECT ? "enabled" : "disabled");
2819 seq_printf(m, "parity checking %s\n",
2820 PARITY ? "enabled" : "disabled");
2821 seq_printf(m, "synchronous transfers %s\n",
2822 SYNCHRONOUS ? "enabled" : "disabled");
2823 seq_printf(m, "%d commands currently queued\n", HOSTDATA(shpnt)->commands);
2824
2825 if(SYNCHRONOUS) {
2826 seq_puts(m, "synchronously operating targets (tick=50 ns):\n");
2827 for (i = 0; i < 8; i++)
2828 if (HOSTDATA(shpnt)->syncrate[i] & 0x7f)
2829 seq_printf(m, "target %d: period %dT/%dns; req/ack offset %d\n",
2830 i,
2831 (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2),
2832 (((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
2833 HOSTDATA(shpnt)->syncrate[i] & 0x0f);
2834 }
2835 seq_puts(m, "\nqueue status:\n");
2836 DO_LOCK(flags);
2837 if (ISSUE_SC) {
2838 seq_puts(m, "not yet issued commands:\n");
2839 for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
2840 get_command(m, ptr);
2841 } else
2842 seq_puts(m, "no not yet issued commands\n");
2843 DO_UNLOCK(flags);
2844
2845 if (CURRENT_SC) {
2846 seq_puts(m, "current command:\n");
2847 get_command(m, CURRENT_SC);
2848 } else
2849 seq_puts(m, "no current command\n");
2850
2851 if (DISCONNECTED_SC) {
2852 seq_puts(m, "disconnected commands:\n");
2853 for (ptr = DISCONNECTED_SC; ptr; ptr = SCNEXT(ptr))
2854 get_command(m, ptr);
2855 } else
2856 seq_puts(m, "no disconnected commands\n");
2857
2858 get_ports(m, shpnt);
2859
2860#if defined(AHA152X_STAT)
2861 seq_printf(m, "statistics:\n"
2862 "total commands: %d\n"
2863 "disconnections: %d\n"
2864 "busfree with check condition: %d\n"
2865 "busfree without old command: %d\n"
2866 "busfree without new command: %d\n"
2867 "busfree without done command: %d\n"
2868 "busfree without any action: %d\n"
2869 "state "
2870 "transitions "
2871 "count "
2872 "time\n",
2873 HOSTDATA(shpnt)->total_commands,
2874 HOSTDATA(shpnt)->disconnections,
2875 HOSTDATA(shpnt)->busfree_with_check_condition,
2876 HOSTDATA(shpnt)->busfree_without_old_command,
2877 HOSTDATA(shpnt)->busfree_without_new_command,
2878 HOSTDATA(shpnt)->busfree_without_done_command,
2879 HOSTDATA(shpnt)->busfree_without_any_action);
2880 for(i=0; i<maxstate; i++) {
2881 seq_printf(m, "%-10s %-12d %-12d %-12ld\n",
2882 states[i].name,
2883 HOSTDATA(shpnt)->count_trans[i],
2884 HOSTDATA(shpnt)->count[i],
2885 HOSTDATA(shpnt)->time[i]);
2886 }
2887#endif
2888 return 0;
2889}
2890
2891static int aha152x_adjust_queue(struct scsi_device *device)
2892{
2893 blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
2894 return 0;
2895}
2896
2897static struct scsi_host_template aha152x_driver_template = {
2898 .module = THIS_MODULE,
2899 .name = AHA152X_REVID,
2900 .proc_name = "aha152x",
2901 .show_info = aha152x_show_info,
2902 .write_info = aha152x_set_info,
2903 .queuecommand = aha152x_queue,
2904 .eh_abort_handler = aha152x_abort,
2905 .eh_device_reset_handler = aha152x_device_reset,
2906 .eh_bus_reset_handler = aha152x_bus_reset,
2907 .bios_param = aha152x_biosparam,
2908 .can_queue = 1,
2909 .this_id = 7,
2910 .sg_tablesize = SG_ALL,
2911 .dma_boundary = PAGE_SIZE - 1,
2912 .slave_alloc = aha152x_adjust_queue,
2913};
2914
2915#if !defined(AHA152X_PCMCIA)
2916static int setup_count;
2917static struct aha152x_setup setup[2];
2918
2919/* possible i/o addresses for the AIC-6260; default first */
2920static unsigned short ports[] = { 0x340, 0x140 };
2921
2922#if !defined(SKIP_BIOSTEST)
2923/* possible locations for the Adaptec BIOS; defaults first */
2924static unsigned int addresses[] =
2925{
2926 0xdc000, /* default first */
2927 0xc8000,
2928 0xcc000,
2929 0xd0000,
2930 0xd4000,
2931 0xd8000,
2932 0xe0000,
2933 0xeb800, /* VTech Platinum SMP */
2934 0xf0000,
2935};
2936
2937/* signatures for various AIC-6[23]60 based controllers.
2938 The point in detecting signatures is to avoid useless and maybe
2939 harmful probes on ports. I'm not sure that all listed boards pass
2940 auto-configuration. For those which fail the BIOS signature is
2941 obsolete, because user intervention to supply the configuration is
2942 needed anyway. May be an information whether or not the BIOS supports
2943 extended translation could be also useful here. */
2944static struct signature {
2945 unsigned char *signature;
2946 int sig_offset;
2947 int sig_length;
2948} signatures[] =
2949{
2950 { "Adaptec AHA-1520 BIOS", 0x102e, 21 },
2951 /* Adaptec 152x */
2952 { "Adaptec AHA-1520B", 0x000b, 17 },
2953 /* Adaptec 152x rev B */
2954 { "Adaptec AHA-1520B", 0x0026, 17 },
2955 /* Iomega Jaz Jet ISA (AIC6370Q) */
2956 { "Adaptec ASW-B626 BIOS", 0x1029, 21 },
2957 /* on-board controller */
2958 { "Adaptec BIOS: ASW-B626", 0x000f, 22 },
2959 /* on-board controller */
2960 { "Adaptec ASW-B626 S2", 0x2e6c, 19 },
2961 /* on-board controller */
2962 { "Adaptec BIOS:AIC-6360", 0x000c, 21 },
2963 /* on-board controller */
2964 { "ScsiPro SP-360 BIOS", 0x2873, 19 },
2965 /* ScsiPro-Controller */
2966 { "GA-400 LOCAL BUS SCSI BIOS", 0x102e, 26 },
2967 /* Gigabyte Local-Bus-SCSI */
2968 { "Adaptec BIOS:AVA-282X", 0x000c, 21 },
2969 /* Adaptec 282x */
2970 { "Adaptec IBM Dock II SCSI", 0x2edd, 24 },
2971 /* IBM Thinkpad Dock II */
2972 { "Adaptec BIOS:AHA-1532P", 0x001c, 22 },
2973 /* IBM Thinkpad Dock II SCSI */
2974 { "DTC3520A Host Adapter BIOS", 0x318a, 26 },
2975 /* DTC 3520A ISA SCSI */
2976};
2977#endif /* !SKIP_BIOSTEST */
2978
2979/*
2980 * Test, if port_base is valid.
2981 *
2982 */
2983static int aha152x_porttest(int io_port)
2984{
2985 int i;
2986
2987 SETPORT(io_port + O_DMACNTRL1, 0); /* reset stack pointer */
2988 for (i = 0; i < 16; i++)
2989 SETPORT(io_port + O_STACK, i);
2990
2991 SETPORT(io_port + O_DMACNTRL1, 0); /* reset stack pointer */
2992 for (i = 0; i < 16 && GETPORT(io_port + O_STACK) == i; i++)
2993 ;
2994
2995 return (i == 16);
2996}
2997
2998static int tc1550_porttest(int io_port)
2999{
3000 int i;
3001
3002 SETPORT(io_port + O_TC_DMACNTRL1, 0); /* reset stack pointer */
3003 for (i = 0; i < 16; i++)
3004 SETPORT(io_port + O_STACK, i);
3005
3006 SETPORT(io_port + O_TC_DMACNTRL1, 0); /* reset stack pointer */
3007 for (i = 0; i < 16 && GETPORT(io_port + O_TC_STACK) == i; i++)
3008 ;
3009
3010 return (i == 16);
3011}
3012
3013
3014static int checksetup(struct aha152x_setup *setup)
3015{
3016 int i;
3017 for (i = 0; i < ARRAY_SIZE(ports) && (setup->io_port != ports[i]); i++)
3018 ;
3019
3020 if (i == ARRAY_SIZE(ports))
3021 return 0;
3022
3023 if (!request_region(setup->io_port, IO_RANGE, "aha152x")) {
3024 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
3025 return 0;
3026 }
3027
3028 if( aha152x_porttest(setup->io_port) ) {
3029 setup->tc1550=0;
3030 } else if( tc1550_porttest(setup->io_port) ) {
3031 setup->tc1550=1;
3032 } else {
3033 release_region(setup->io_port, IO_RANGE);
3034 return 0;
3035 }
3036
3037 release_region(setup->io_port, IO_RANGE);
3038
3039 if ((setup->irq < IRQ_MIN) || (setup->irq > IRQ_MAX))
3040 return 0;
3041
3042 if ((setup->scsiid < 0) || (setup->scsiid > 7))
3043 return 0;
3044
3045 if ((setup->reconnect < 0) || (setup->reconnect > 1))
3046 return 0;
3047
3048 if ((setup->parity < 0) || (setup->parity > 1))
3049 return 0;
3050
3051 if ((setup->synchronous < 0) || (setup->synchronous > 1))
3052 return 0;
3053
3054 if ((setup->ext_trans < 0) || (setup->ext_trans > 1))
3055 return 0;
3056
3057
3058 return 1;
3059}
3060
3061
3062static int __init aha152x_init(void)
3063{
3064 int i, j, ok;
3065#if defined(AUTOCONF)
3066 aha152x_config conf;
3067#endif
3068#ifdef __ISAPNP__
3069 struct pnp_dev *dev=NULL, *pnpdev[2] = {NULL, NULL};
3070#endif
3071
3072 if ( setup_count ) {
3073 printk(KERN_INFO "aha152x: processing commandline: ");
3074
3075 for (i = 0; i<setup_count; i++) {
3076 if (!checksetup(&setup[i])) {
3077 printk(KERN_ERR "\naha152x: %s\n", setup[i].conf);
3078 printk(KERN_ERR "aha152x: invalid line\n");
3079 }
3080 }
3081 printk("ok\n");
3082 }
3083
3084#if defined(SETUP0)
3085 if (setup_count < ARRAY_SIZE(setup)) {
3086 struct aha152x_setup override = SETUP0;
3087
3088 if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
3089 if (!checksetup(&override)) {
3090 printk(KERN_ERR "\naha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
3091 override.io_port,
3092 override.irq,
3093 override.scsiid,
3094 override.reconnect,
3095 override.parity,
3096 override.synchronous,
3097 override.delay,
3098 override.ext_trans);
3099 } else
3100 setup[setup_count++] = override;
3101 }
3102 }
3103#endif
3104
3105#if defined(SETUP1)
3106 if (setup_count < ARRAY_SIZE(setup)) {
3107 struct aha152x_setup override = SETUP1;
3108
3109 if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
3110 if (!checksetup(&override)) {
3111 printk(KERN_ERR "\naha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
3112 override.io_port,
3113 override.irq,
3114 override.scsiid,
3115 override.reconnect,
3116 override.parity,
3117 override.synchronous,
3118 override.delay,
3119 override.ext_trans);
3120 } else
3121 setup[setup_count++] = override;
3122 }
3123 }
3124#endif
3125
3126#if defined(MODULE)
3127 if (setup_count<ARRAY_SIZE(setup) && (aha152x[0]!=0 || io[0]!=0 || irq[0]!=0)) {
3128 if(aha152x[0]!=0) {
3129 setup[setup_count].conf = "";
3130 setup[setup_count].io_port = aha152x[0];
3131 setup[setup_count].irq = aha152x[1];
3132 setup[setup_count].scsiid = aha152x[2];
3133 setup[setup_count].reconnect = aha152x[3];
3134 setup[setup_count].parity = aha152x[4];
3135 setup[setup_count].synchronous = aha152x[5];
3136 setup[setup_count].delay = aha152x[6];
3137 setup[setup_count].ext_trans = aha152x[7];
3138 } else if (io[0] != 0 || irq[0] != 0) {
3139 if(io[0]!=0) setup[setup_count].io_port = io[0];
3140 if(irq[0]!=0) setup[setup_count].irq = irq[0];
3141
3142 setup[setup_count].scsiid = scsiid[0];
3143 setup[setup_count].reconnect = reconnect[0];
3144 setup[setup_count].parity = parity[0];
3145 setup[setup_count].synchronous = sync[0];
3146 setup[setup_count].delay = delay[0];
3147 setup[setup_count].ext_trans = exttrans[0];
3148 }
3149
3150 if (checksetup(&setup[setup_count]))
3151 setup_count++;
3152 else
3153 printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
3154 setup[setup_count].io_port,
3155 setup[setup_count].irq,
3156 setup[setup_count].scsiid,
3157 setup[setup_count].reconnect,
3158 setup[setup_count].parity,
3159 setup[setup_count].synchronous,
3160 setup[setup_count].delay,
3161 setup[setup_count].ext_trans);
3162 }
3163
3164 if (setup_count<ARRAY_SIZE(setup) && (aha152x1[0]!=0 || io[1]!=0 || irq[1]!=0)) {
3165 if(aha152x1[0]!=0) {
3166 setup[setup_count].conf = "";
3167 setup[setup_count].io_port = aha152x1[0];
3168 setup[setup_count].irq = aha152x1[1];
3169 setup[setup_count].scsiid = aha152x1[2];
3170 setup[setup_count].reconnect = aha152x1[3];
3171 setup[setup_count].parity = aha152x1[4];
3172 setup[setup_count].synchronous = aha152x1[5];
3173 setup[setup_count].delay = aha152x1[6];
3174 setup[setup_count].ext_trans = aha152x1[7];
3175 } else if (io[1] != 0 || irq[1] != 0) {
3176 if(io[1]!=0) setup[setup_count].io_port = io[1];
3177 if(irq[1]!=0) setup[setup_count].irq = irq[1];
3178
3179 setup[setup_count].scsiid = scsiid[1];
3180 setup[setup_count].reconnect = reconnect[1];
3181 setup[setup_count].parity = parity[1];
3182 setup[setup_count].synchronous = sync[1];
3183 setup[setup_count].delay = delay[1];
3184 setup[setup_count].ext_trans = exttrans[1];
3185 }
3186 if (checksetup(&setup[setup_count]))
3187 setup_count++;
3188 else
3189 printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
3190 setup[setup_count].io_port,
3191 setup[setup_count].irq,
3192 setup[setup_count].scsiid,
3193 setup[setup_count].reconnect,
3194 setup[setup_count].parity,
3195 setup[setup_count].synchronous,
3196 setup[setup_count].delay,
3197 setup[setup_count].ext_trans);
3198 }
3199#endif
3200
3201#ifdef __ISAPNP__
3202 for(i=0; setup_count<ARRAY_SIZE(setup) && id_table[i].vendor; i++) {
3203 while ( setup_count<ARRAY_SIZE(setup) &&
3204 (dev=pnp_find_dev(NULL, id_table[i].vendor, id_table[i].function, dev)) ) {
3205 if (pnp_device_attach(dev) < 0)
3206 continue;
3207
3208 if (pnp_activate_dev(dev) < 0) {
3209 pnp_device_detach(dev);
3210 continue;
3211 }
3212
3213 if (!pnp_port_valid(dev, 0)) {
3214 pnp_device_detach(dev);
3215 continue;
3216 }
3217
3218 if (setup_count==1 && pnp_port_start(dev, 0)==setup[0].io_port) {
3219 pnp_device_detach(dev);
3220 continue;
3221 }
3222
3223 setup[setup_count].io_port = pnp_port_start(dev, 0);
3224 setup[setup_count].irq = pnp_irq(dev, 0);
3225 setup[setup_count].scsiid = 7;
3226 setup[setup_count].reconnect = 1;
3227 setup[setup_count].parity = 1;
3228 setup[setup_count].synchronous = 1;
3229 setup[setup_count].delay = DELAY_DEFAULT;
3230 setup[setup_count].ext_trans = 0;
3231#if defined(__ISAPNP__)
3232 pnpdev[setup_count] = dev;
3233#endif
3234 printk (KERN_INFO
3235 "aha152x: found ISAPnP adapter at io=0x%03x, irq=%d\n",
3236 setup[setup_count].io_port, setup[setup_count].irq);
3237 setup_count++;
3238 }
3239 }
3240#endif
3241
3242#if defined(AUTOCONF)
3243 if (setup_count<ARRAY_SIZE(setup)) {
3244#if !defined(SKIP_BIOSTEST)
3245 ok = 0;
3246 for (i = 0; i < ARRAY_SIZE(addresses) && !ok; i++) {
3247 void __iomem *p = ioremap(addresses[i], 0x4000);
3248 if (!p)
3249 continue;
3250 for (j = 0; j<ARRAY_SIZE(signatures) && !ok; j++)
3251 ok = check_signature(p + signatures[j].sig_offset,
3252 signatures[j].signature, signatures[j].sig_length);
3253 iounmap(p);
3254 }
3255 if (!ok && setup_count == 0)
3256 return -ENODEV;
3257
3258 printk(KERN_INFO "aha152x: BIOS test: passed, ");
3259#else
3260 printk(KERN_INFO "aha152x: ");
3261#endif /* !SKIP_BIOSTEST */
3262
3263 ok = 0;
3264 for (i = 0; i < ARRAY_SIZE(ports) && setup_count < 2; i++) {
3265 if ((setup_count == 1) && (setup[0].io_port == ports[i]))
3266 continue;
3267
3268 if (!request_region(ports[i], IO_RANGE, "aha152x")) {
3269 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
3270 continue;
3271 }
3272
3273 if (aha152x_porttest(ports[i])) {
3274 setup[setup_count].tc1550 = 0;
3275
3276 conf.cf_port =
3277 (GETPORT(ports[i] + O_PORTA) << 8) + GETPORT(ports[i] + O_PORTB);
3278 } else if (tc1550_porttest(ports[i])) {
3279 setup[setup_count].tc1550 = 1;
3280
3281 conf.cf_port =
3282 (GETPORT(ports[i] + O_TC_PORTA) << 8) + GETPORT(ports[i] + O_TC_PORTB);
3283 } else {
3284 release_region(ports[i], IO_RANGE);
3285 continue;
3286 }
3287
3288 release_region(ports[i], IO_RANGE);
3289
3290 ok++;
3291 setup[setup_count].io_port = ports[i];
3292 setup[setup_count].irq = IRQ_MIN + conf.cf_irq;
3293 setup[setup_count].scsiid = conf.cf_id;
3294 setup[setup_count].reconnect = conf.cf_tardisc;
3295 setup[setup_count].parity = !conf.cf_parity;
3296 setup[setup_count].synchronous = conf.cf_syncneg;
3297 setup[setup_count].delay = DELAY_DEFAULT;
3298 setup[setup_count].ext_trans = 0;
3299 setup_count++;
3300
3301 }
3302
3303 if (ok)
3304 printk("auto configuration: ok, ");
3305 }
3306#endif
3307
3308 printk("%d controller(s) configured\n", setup_count);
3309
3310 for (i=0; i<setup_count; i++) {
3311 if ( request_region(setup[i].io_port, IO_RANGE, "aha152x") ) {
3312 struct Scsi_Host *shpnt = aha152x_probe_one(&setup[i]);
3313
3314 if( !shpnt ) {
3315 release_region(setup[i].io_port, IO_RANGE);
3316#if defined(__ISAPNP__)
3317 } else if( pnpdev[i] ) {
3318 HOSTDATA(shpnt)->pnpdev=pnpdev[i];
3319 pnpdev[i]=NULL;
3320#endif
3321 }
3322 } else {
3323 printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup[i].io_port);
3324 }
3325
3326#if defined(__ISAPNP__)
3327 if( pnpdev[i] )
3328 pnp_device_detach(pnpdev[i]);
3329#endif
3330 }
3331
3332 return 0;
3333}
3334
3335static void __exit aha152x_exit(void)
3336{
3337 struct aha152x_hostdata *hd, *tmp;
3338
3339 list_for_each_entry_safe(hd, tmp, &aha152x_host_list, host_list) {
3340 struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
3341
3342 aha152x_release(shost);
3343 }
3344}
3345
3346module_init(aha152x_init);
3347module_exit(aha152x_exit);
3348
3349#if !defined(MODULE)
3350static int __init aha152x_setup(char *str)
3351{
3352 int ints[10];
3353
3354 get_options(str, ARRAY_SIZE(ints), ints);
3355
3356 if(setup_count>=ARRAY_SIZE(setup)) {
3357 printk(KERN_ERR "aha152x: you can only configure up to two controllers\n");
3358 return 1;
3359 }
3360
3361 setup[setup_count].conf = str;
3362 setup[setup_count].io_port = ints[0] >= 1 ? ints[1] : 0x340;
3363 setup[setup_count].irq = ints[0] >= 2 ? ints[2] : 11;
3364 setup[setup_count].scsiid = ints[0] >= 3 ? ints[3] : 7;
3365 setup[setup_count].reconnect = ints[0] >= 4 ? ints[4] : 1;
3366 setup[setup_count].parity = ints[0] >= 5 ? ints[5] : 1;
3367 setup[setup_count].synchronous = ints[0] >= 6 ? ints[6] : 1;
3368 setup[setup_count].delay = ints[0] >= 7 ? ints[7] : DELAY_DEFAULT;
3369 setup[setup_count].ext_trans = ints[0] >= 8 ? ints[8] : 0;
3370 if (ints[0] > 8) { /*}*/
3371 printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
3372 "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>]]]]]]]\n");
3373 } else {
3374 setup_count++;
3375 return 0;
3376 }
3377
3378 return 1;
3379}
3380__setup("aha152x=", aha152x_setup);
3381#endif
3382
3383#endif /* !AHA152X_PCMCIA */