1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for Broadcom platforms
  4#
  5config PHY_BCM63XX_USBH
  6	tristate "BCM63xx USBH PHY driver"
  7	depends on BMIPS_GENERIC || COMPILE_TEST
  8	select GENERIC_PHY
  9	help
 10	  Enable this to support the BCM63xx USBH PHY driver.
 11	  If unsure, say N.
 12
 13config PHY_CYGNUS_PCIE
 14	tristate "Broadcom Cygnus PCIe PHY driver"
 15	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 16	select GENERIC_PHY
 17	default ARCH_BCM_CYGNUS
 18	help
 19	  Enable this to support the Broadcom Cygnus PCIe PHY.
 20	  If unsure, say N.
 21
 22config PHY_BCM_SR_USB
 23	tristate "Broadcom Stingray USB PHY driver"
 24	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
 25	select GENERIC_PHY
 26	default ARCH_BCM_IPROC
 27	help
 28	  Enable this to support the Broadcom Stingray USB PHY
 29	  driver. It supports all versions of Superspeed and
 30	  Highspeed PHYs.
 31	  If unsure, say N.
 32
 33config BCM_KONA_USB2_PHY
 34	tristate "Broadcom Kona USB2 PHY Driver"
 35	depends on HAS_IOMEM
 36	select GENERIC_PHY
 37	help
 38	  Enable this to support the Broadcom Kona USB 2.0 PHY.
 39
 40config PHY_BCM_NS_USB2
 41	tristate "Broadcom Northstar USB 2.0 PHY Driver"
 42	depends on ARCH_BCM_IPROC || COMPILE_TEST
 43	depends on HAS_IOMEM && OF
 44	select GENERIC_PHY
 45	help
 46	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
 47	  controller on Northstar family.
 48
 49config PHY_BCM_NS_USB3
 50	tristate "Broadcom Northstar USB 3.0 PHY Driver"
 51	depends on ARCH_BCM_IPROC || COMPILE_TEST
 52	depends on HAS_IOMEM && OF
 53	depends on MDIO_BUS
 54	select GENERIC_PHY
 55	help
 56	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
 57	  controller on Northstar family.
 58
 59config PHY_NS2_PCIE
 60	tristate "Broadcom Northstar2 PCIe PHY driver"
 61	depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
 62	select GENERIC_PHY
 63	default ARCH_BCM_IPROC
 64	help
 65	  Enable this to support the Broadcom Northstar2 PCIe PHY.
 66	  If unsure, say N.
 67
 68config PHY_NS2_USB_DRD
 69	tristate "Broadcom Northstar2 USB DRD PHY support"
 70	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
 71	select GENERIC_PHY
 72	select EXTCON
 73	default ARCH_BCM_IPROC
 74	help
 75	  Enable this to support the Broadcom Northstar2 USB DRD PHY.
 76	  This driver initializes the PHY in either HOST or DEVICE mode.
 77	  The host or device configuration is read from device tree.
 78
 79	  If unsure, say N.
 80
 81config PHY_BRCM_SATA
 82	tristate "Broadcom SATA PHY driver"
 83	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
 84		   ARCH_BCM_63XX || COMPILE_TEST
 85	depends on OF
 86	select GENERIC_PHY
 87	default ARCH_BCM_IPROC
 88	help
 89	  Enable this to support the Broadcom SATA PHY.
 90	  If unsure, say N.
 91
 92config PHY_BRCM_USB
 93	tristate "Broadcom STB USB PHY driver"
 94	depends on ARCH_BRCMSTB || COMPILE_TEST
 95	depends on OF
 96	select GENERIC_PHY
 97	select SOC_BRCMSTB
 98	default ARCH_BRCMSTB
 99	help
100	  Enable this to support the Broadcom STB USB PHY.
101	  This driver is required by the USB XHCI, EHCI and OHCI
102	  drivers.
103	  If unsure, say N.
104
105config PHY_BCM_SR_PCIE
106	tristate "Broadcom Stingray PCIe PHY driver"
107	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
108	select GENERIC_PHY
109	select MFD_SYSCON
110	default ARCH_BCM_IPROC
111	help
112	  Enable this to support the Broadcom Stingray PCIe PHY
113	  If unsure, say N.