Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * PCIe driver for Marvell Armada 370 and Armada XP SoCs
4 *
5 * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
6 */
7
8#include <linux/kernel.h>
9#include <linux/pci.h>
10#include <linux/clk.h>
11#include <linux/delay.h>
12#include <linux/gpio.h>
13#include <linux/init.h>
14#include <linux/mbus.h>
15#include <linux/msi.h>
16#include <linux/slab.h>
17#include <linux/platform_device.h>
18#include <linux/of_address.h>
19#include <linux/of_irq.h>
20#include <linux/of_gpio.h>
21#include <linux/of_pci.h>
22#include <linux/of_platform.h>
23
24#include "../pci.h"
25#include "../pci-bridge-emul.h"
26
27/*
28 * PCIe unit register offsets.
29 */
30#define PCIE_DEV_ID_OFF 0x0000
31#define PCIE_CMD_OFF 0x0004
32#define PCIE_DEV_REV_OFF 0x0008
33#define PCIE_BAR_LO_OFF(n) (0x0010 + ((n) << 3))
34#define PCIE_BAR_HI_OFF(n) (0x0014 + ((n) << 3))
35#define PCIE_CAP_PCIEXP 0x0060
36#define PCIE_HEADER_LOG_4_OFF 0x0128
37#define PCIE_BAR_CTRL_OFF(n) (0x1804 + (((n) - 1) * 4))
38#define PCIE_WIN04_CTRL_OFF(n) (0x1820 + ((n) << 4))
39#define PCIE_WIN04_BASE_OFF(n) (0x1824 + ((n) << 4))
40#define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
41#define PCIE_WIN5_CTRL_OFF 0x1880
42#define PCIE_WIN5_BASE_OFF 0x1884
43#define PCIE_WIN5_REMAP_OFF 0x188c
44#define PCIE_CONF_ADDR_OFF 0x18f8
45#define PCIE_CONF_ADDR_EN 0x80000000
46#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
47#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
48#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
49#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
50#define PCIE_CONF_ADDR(bus, devfn, where) \
51 (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | \
52 PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
53 PCIE_CONF_ADDR_EN)
54#define PCIE_CONF_DATA_OFF 0x18fc
55#define PCIE_MASK_OFF 0x1910
56#define PCIE_MASK_ENABLE_INTS 0x0f000000
57#define PCIE_CTRL_OFF 0x1a00
58#define PCIE_CTRL_X1_MODE 0x0001
59#define PCIE_STAT_OFF 0x1a04
60#define PCIE_STAT_BUS 0xff00
61#define PCIE_STAT_DEV 0x1f0000
62#define PCIE_STAT_LINK_DOWN BIT(0)
63#define PCIE_RC_RTSTA 0x1a14
64#define PCIE_DEBUG_CTRL 0x1a60
65#define PCIE_DEBUG_SOFT_RESET BIT(20)
66
67struct mvebu_pcie_port;
68
69/* Structure representing all PCIe interfaces */
70struct mvebu_pcie {
71 struct platform_device *pdev;
72 struct mvebu_pcie_port *ports;
73 struct msi_controller *msi;
74 struct resource io;
75 struct resource realio;
76 struct resource mem;
77 struct resource busn;
78 int nports;
79};
80
81struct mvebu_pcie_window {
82 phys_addr_t base;
83 phys_addr_t remap;
84 size_t size;
85};
86
87/* Structure representing one PCIe interface */
88struct mvebu_pcie_port {
89 char *name;
90 void __iomem *base;
91 u32 port;
92 u32 lane;
93 int devfn;
94 unsigned int mem_target;
95 unsigned int mem_attr;
96 unsigned int io_target;
97 unsigned int io_attr;
98 struct clk *clk;
99 struct gpio_desc *reset_gpio;
100 char *reset_name;
101 struct pci_bridge_emul bridge;
102 struct device_node *dn;
103 struct mvebu_pcie *pcie;
104 struct mvebu_pcie_window memwin;
105 struct mvebu_pcie_window iowin;
106 u32 saved_pcie_stat;
107 struct resource regs;
108};
109
110static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
111{
112 writel(val, port->base + reg);
113}
114
115static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
116{
117 return readl(port->base + reg);
118}
119
120static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
121{
122 return port->io_target != -1 && port->io_attr != -1;
123}
124
125static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
126{
127 return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
128}
129
130static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
131{
132 u32 stat;
133
134 stat = mvebu_readl(port, PCIE_STAT_OFF);
135 stat &= ~PCIE_STAT_BUS;
136 stat |= nr << 8;
137 mvebu_writel(port, stat, PCIE_STAT_OFF);
138}
139
140static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
141{
142 u32 stat;
143
144 stat = mvebu_readl(port, PCIE_STAT_OFF);
145 stat &= ~PCIE_STAT_DEV;
146 stat |= nr << 16;
147 mvebu_writel(port, stat, PCIE_STAT_OFF);
148}
149
150/*
151 * Setup PCIE BARs and Address Decode Wins:
152 * BAR[0] -> internal registers (needed for MSI)
153 * BAR[1] -> covers all DRAM banks
154 * BAR[2] -> Disabled
155 * WIN[0-3] -> DRAM bank[0-3]
156 */
157static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
158{
159 const struct mbus_dram_target_info *dram;
160 u32 size;
161 int i;
162
163 dram = mv_mbus_dram_info();
164
165 /* First, disable and clear BARs and windows. */
166 for (i = 1; i < 3; i++) {
167 mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
168 mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
169 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
170 }
171
172 for (i = 0; i < 5; i++) {
173 mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
174 mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
175 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
176 }
177
178 mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
179 mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
180 mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
181
182 /* Setup windows for DDR banks. Count total DDR size on the fly. */
183 size = 0;
184 for (i = 0; i < dram->num_cs; i++) {
185 const struct mbus_dram_window *cs = dram->cs + i;
186
187 mvebu_writel(port, cs->base & 0xffff0000,
188 PCIE_WIN04_BASE_OFF(i));
189 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
190 mvebu_writel(port,
191 ((cs->size - 1) & 0xffff0000) |
192 (cs->mbus_attr << 8) |
193 (dram->mbus_dram_target_id << 4) | 1,
194 PCIE_WIN04_CTRL_OFF(i));
195
196 size += cs->size;
197 }
198
199 /* Round up 'size' to the nearest power of two. */
200 if ((size & (size - 1)) != 0)
201 size = 1 << fls(size);
202
203 /* Setup BAR[1] to all DRAM banks. */
204 mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
205 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
206 mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
207 PCIE_BAR_CTRL_OFF(1));
208
209 /*
210 * Point BAR[0] to the device's internal registers.
211 */
212 mvebu_writel(port, round_down(port->regs.start, SZ_1M), PCIE_BAR_LO_OFF(0));
213 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(0));
214}
215
216static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
217{
218 u32 cmd, mask;
219
220 /* Point PCIe unit MBUS decode windows to DRAM space. */
221 mvebu_pcie_setup_wins(port);
222
223 /* Master + slave enable. */
224 cmd = mvebu_readl(port, PCIE_CMD_OFF);
225 cmd |= PCI_COMMAND_IO;
226 cmd |= PCI_COMMAND_MEMORY;
227 cmd |= PCI_COMMAND_MASTER;
228 mvebu_writel(port, cmd, PCIE_CMD_OFF);
229
230 /* Enable interrupt lines A-D. */
231 mask = mvebu_readl(port, PCIE_MASK_OFF);
232 mask |= PCIE_MASK_ENABLE_INTS;
233 mvebu_writel(port, mask, PCIE_MASK_OFF);
234}
235
236static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
237 struct pci_bus *bus,
238 u32 devfn, int where, int size, u32 *val)
239{
240 void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
241
242 mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
243 PCIE_CONF_ADDR_OFF);
244
245 switch (size) {
246 case 1:
247 *val = readb_relaxed(conf_data + (where & 3));
248 break;
249 case 2:
250 *val = readw_relaxed(conf_data + (where & 2));
251 break;
252 case 4:
253 *val = readl_relaxed(conf_data);
254 break;
255 }
256
257 return PCIBIOS_SUCCESSFUL;
258}
259
260static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
261 struct pci_bus *bus,
262 u32 devfn, int where, int size, u32 val)
263{
264 void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
265
266 mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
267 PCIE_CONF_ADDR_OFF);
268
269 switch (size) {
270 case 1:
271 writeb(val, conf_data + (where & 3));
272 break;
273 case 2:
274 writew(val, conf_data + (where & 2));
275 break;
276 case 4:
277 writel(val, conf_data);
278 break;
279 default:
280 return PCIBIOS_BAD_REGISTER_NUMBER;
281 }
282
283 return PCIBIOS_SUCCESSFUL;
284}
285
286/*
287 * Remove windows, starting from the largest ones to the smallest
288 * ones.
289 */
290static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
291 phys_addr_t base, size_t size)
292{
293 while (size) {
294 size_t sz = 1 << (fls(size) - 1);
295
296 mvebu_mbus_del_window(base, sz);
297 base += sz;
298 size -= sz;
299 }
300}
301
302/*
303 * MBus windows can only have a power of two size, but PCI BARs do not
304 * have this constraint. Therefore, we have to split the PCI BAR into
305 * areas each having a power of two size. We start from the largest
306 * one (i.e highest order bit set in the size).
307 */
308static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
309 unsigned int target, unsigned int attribute,
310 phys_addr_t base, size_t size,
311 phys_addr_t remap)
312{
313 size_t size_mapped = 0;
314
315 while (size) {
316 size_t sz = 1 << (fls(size) - 1);
317 int ret;
318
319 ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
320 sz, remap);
321 if (ret) {
322 phys_addr_t end = base + sz - 1;
323
324 dev_err(&port->pcie->pdev->dev,
325 "Could not create MBus window at [mem %pa-%pa]: %d\n",
326 &base, &end, ret);
327 mvebu_pcie_del_windows(port, base - size_mapped,
328 size_mapped);
329 return;
330 }
331
332 size -= sz;
333 size_mapped += sz;
334 base += sz;
335 if (remap != MVEBU_MBUS_NO_REMAP)
336 remap += sz;
337 }
338}
339
340static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
341 unsigned int target, unsigned int attribute,
342 const struct mvebu_pcie_window *desired,
343 struct mvebu_pcie_window *cur)
344{
345 if (desired->base == cur->base && desired->remap == cur->remap &&
346 desired->size == cur->size)
347 return;
348
349 if (cur->size != 0) {
350 mvebu_pcie_del_windows(port, cur->base, cur->size);
351 cur->size = 0;
352 cur->base = 0;
353
354 /*
355 * If something tries to change the window while it is enabled
356 * the change will not be done atomically. That would be
357 * difficult to do in the general case.
358 */
359 }
360
361 if (desired->size == 0)
362 return;
363
364 mvebu_pcie_add_windows(port, target, attribute, desired->base,
365 desired->size, desired->remap);
366 *cur = *desired;
367}
368
369static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
370{
371 struct mvebu_pcie_window desired = {};
372 struct pci_bridge_emul_conf *conf = &port->bridge.conf;
373
374 /* Are the new iobase/iolimit values invalid? */
375 if (conf->iolimit < conf->iobase ||
376 conf->iolimitupper < conf->iobaseupper ||
377 !(conf->command & PCI_COMMAND_IO)) {
378 mvebu_pcie_set_window(port, port->io_target, port->io_attr,
379 &desired, &port->iowin);
380 return;
381 }
382
383 if (!mvebu_has_ioport(port)) {
384 dev_WARN(&port->pcie->pdev->dev,
385 "Attempt to set IO when IO is disabled\n");
386 return;
387 }
388
389 /*
390 * We read the PCI-to-PCI bridge emulated registers, and
391 * calculate the base address and size of the address decoding
392 * window to setup, according to the PCI-to-PCI bridge
393 * specifications. iobase is the bus address, port->iowin_base
394 * is the CPU address.
395 */
396 desired.remap = ((conf->iobase & 0xF0) << 8) |
397 (conf->iobaseupper << 16);
398 desired.base = port->pcie->io.start + desired.remap;
399 desired.size = ((0xFFF | ((conf->iolimit & 0xF0) << 8) |
400 (conf->iolimitupper << 16)) -
401 desired.remap) +
402 1;
403
404 mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
405 &port->iowin);
406}
407
408static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
409{
410 struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
411 struct pci_bridge_emul_conf *conf = &port->bridge.conf;
412
413 /* Are the new membase/memlimit values invalid? */
414 if (conf->memlimit < conf->membase ||
415 !(conf->command & PCI_COMMAND_MEMORY)) {
416 mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
417 &desired, &port->memwin);
418 return;
419 }
420
421 /*
422 * We read the PCI-to-PCI bridge emulated registers, and
423 * calculate the base address and size of the address decoding
424 * window to setup, according to the PCI-to-PCI bridge
425 * specifications.
426 */
427 desired.base = ((conf->membase & 0xFFF0) << 16);
428 desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
429 desired.base + 1;
430
431 mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
432 &port->memwin);
433}
434
435static pci_bridge_emul_read_status_t
436mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
437 int reg, u32 *value)
438{
439 struct mvebu_pcie_port *port = bridge->data;
440
441 switch (reg) {
442 case PCI_EXP_DEVCAP:
443 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
444 break;
445
446 case PCI_EXP_DEVCTL:
447 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
448 ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
449 PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
450 break;
451
452 case PCI_EXP_LNKCAP:
453 /*
454 * PCIe requires the clock power management capability to be
455 * hard-wired to zero for downstream ports
456 */
457 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
458 ~PCI_EXP_LNKCAP_CLKPM;
459 break;
460
461 case PCI_EXP_LNKCTL:
462 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
463 break;
464
465 case PCI_EXP_SLTCTL:
466 *value = PCI_EXP_SLTSTA_PDS << 16;
467 break;
468
469 case PCI_EXP_RTSTA:
470 *value = mvebu_readl(port, PCIE_RC_RTSTA);
471 break;
472
473 default:
474 return PCI_BRIDGE_EMUL_NOT_HANDLED;
475 }
476
477 return PCI_BRIDGE_EMUL_HANDLED;
478}
479
480static void
481mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
482 int reg, u32 old, u32 new, u32 mask)
483{
484 struct mvebu_pcie_port *port = bridge->data;
485 struct pci_bridge_emul_conf *conf = &bridge->conf;
486
487 switch (reg) {
488 case PCI_COMMAND:
489 {
490 if (!mvebu_has_ioport(port))
491 conf->command &= ~PCI_COMMAND_IO;
492
493 if ((old ^ new) & PCI_COMMAND_IO)
494 mvebu_pcie_handle_iobase_change(port);
495 if ((old ^ new) & PCI_COMMAND_MEMORY)
496 mvebu_pcie_handle_membase_change(port);
497
498 break;
499 }
500
501 case PCI_IO_BASE:
502 /*
503 * We keep bit 1 set, it is a read-only bit that
504 * indicates we support 32 bits addressing for the
505 * I/O
506 */
507 conf->iobase |= PCI_IO_RANGE_TYPE_32;
508 conf->iolimit |= PCI_IO_RANGE_TYPE_32;
509 mvebu_pcie_handle_iobase_change(port);
510 break;
511
512 case PCI_MEMORY_BASE:
513 mvebu_pcie_handle_membase_change(port);
514 break;
515
516 case PCI_IO_BASE_UPPER16:
517 mvebu_pcie_handle_iobase_change(port);
518 break;
519
520 case PCI_PRIMARY_BUS:
521 mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
522 break;
523
524 default:
525 break;
526 }
527}
528
529static void
530mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
531 int reg, u32 old, u32 new, u32 mask)
532{
533 struct mvebu_pcie_port *port = bridge->data;
534
535 switch (reg) {
536 case PCI_EXP_DEVCTL:
537 /*
538 * Armada370 data says these bits must always
539 * be zero when in root complex mode.
540 */
541 new &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
542 PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
543
544 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
545 break;
546
547 case PCI_EXP_LNKCTL:
548 /*
549 * If we don't support CLKREQ, we must ensure that the
550 * CLKREQ enable bit always reads zero. Since we haven't
551 * had this capability, and it's dependent on board wiring,
552 * disable it for the time being.
553 */
554 new &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
555
556 mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
557 break;
558
559 case PCI_EXP_RTSTA:
560 mvebu_writel(port, new, PCIE_RC_RTSTA);
561 break;
562 }
563}
564
565static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
566 .write_base = mvebu_pci_bridge_emul_base_conf_write,
567 .read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
568 .write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
569};
570
571/*
572 * Initialize the configuration space of the PCI-to-PCI bridge
573 * associated with the given PCIe interface.
574 */
575static void mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port)
576{
577 struct pci_bridge_emul *bridge = &port->bridge;
578
579 bridge->conf.vendor = PCI_VENDOR_ID_MARVELL;
580 bridge->conf.device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
581 bridge->conf.class_revision =
582 mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
583
584 if (mvebu_has_ioport(port)) {
585 /* We support 32 bits I/O addressing */
586 bridge->conf.iobase = PCI_IO_RANGE_TYPE_32;
587 bridge->conf.iolimit = PCI_IO_RANGE_TYPE_32;
588 }
589
590 bridge->has_pcie = true;
591 bridge->data = port;
592 bridge->ops = &mvebu_pci_bridge_emul_ops;
593
594 pci_bridge_emul_init(bridge, PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR);
595}
596
597static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
598{
599 return sys->private_data;
600}
601
602static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
603 struct pci_bus *bus,
604 int devfn)
605{
606 int i;
607
608 for (i = 0; i < pcie->nports; i++) {
609 struct mvebu_pcie_port *port = &pcie->ports[i];
610
611 if (bus->number == 0 && port->devfn == devfn)
612 return port;
613 if (bus->number != 0 &&
614 bus->number >= port->bridge.conf.secondary_bus &&
615 bus->number <= port->bridge.conf.subordinate_bus)
616 return port;
617 }
618
619 return NULL;
620}
621
622/* PCI configuration space write function */
623static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
624 int where, int size, u32 val)
625{
626 struct mvebu_pcie *pcie = bus->sysdata;
627 struct mvebu_pcie_port *port;
628 int ret;
629
630 port = mvebu_pcie_find_port(pcie, bus, devfn);
631 if (!port)
632 return PCIBIOS_DEVICE_NOT_FOUND;
633
634 /* Access the emulated PCI-to-PCI bridge */
635 if (bus->number == 0)
636 return pci_bridge_emul_conf_write(&port->bridge, where,
637 size, val);
638
639 if (!mvebu_pcie_link_up(port))
640 return PCIBIOS_DEVICE_NOT_FOUND;
641
642 /* Access the real PCIe interface */
643 ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
644 where, size, val);
645
646 return ret;
647}
648
649/* PCI configuration space read function */
650static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
651 int size, u32 *val)
652{
653 struct mvebu_pcie *pcie = bus->sysdata;
654 struct mvebu_pcie_port *port;
655 int ret;
656
657 port = mvebu_pcie_find_port(pcie, bus, devfn);
658 if (!port) {
659 *val = 0xffffffff;
660 return PCIBIOS_DEVICE_NOT_FOUND;
661 }
662
663 /* Access the emulated PCI-to-PCI bridge */
664 if (bus->number == 0)
665 return pci_bridge_emul_conf_read(&port->bridge, where,
666 size, val);
667
668 if (!mvebu_pcie_link_up(port)) {
669 *val = 0xffffffff;
670 return PCIBIOS_DEVICE_NOT_FOUND;
671 }
672
673 /* Access the real PCIe interface */
674 ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
675 where, size, val);
676
677 return ret;
678}
679
680static struct pci_ops mvebu_pcie_ops = {
681 .read = mvebu_pcie_rd_conf,
682 .write = mvebu_pcie_wr_conf,
683};
684
685static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
686 const struct resource *res,
687 resource_size_t start,
688 resource_size_t size,
689 resource_size_t align)
690{
691 if (dev->bus->number != 0)
692 return start;
693
694 /*
695 * On the PCI-to-PCI bridge side, the I/O windows must have at
696 * least a 64 KB size and the memory windows must have at
697 * least a 1 MB size. Moreover, MBus windows need to have a
698 * base address aligned on their size, and their size must be
699 * a power of two. This means that if the BAR doesn't have a
700 * power of two size, several MBus windows will actually be
701 * created. We need to ensure that the biggest MBus window
702 * (which will be the first one) is aligned on its size, which
703 * explains the rounddown_pow_of_two() being done here.
704 */
705 if (res->flags & IORESOURCE_IO)
706 return round_up(start, max_t(resource_size_t, SZ_64K,
707 rounddown_pow_of_two(size)));
708 else if (res->flags & IORESOURCE_MEM)
709 return round_up(start, max_t(resource_size_t, SZ_1M,
710 rounddown_pow_of_two(size)));
711 else
712 return start;
713}
714
715static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
716 struct device_node *np,
717 struct mvebu_pcie_port *port)
718{
719 int ret = 0;
720
721 ret = of_address_to_resource(np, 0, &port->regs);
722 if (ret)
723 return (void __iomem *)ERR_PTR(ret);
724
725 return devm_ioremap_resource(&pdev->dev, &port->regs);
726}
727
728#define DT_FLAGS_TO_TYPE(flags) (((flags) >> 24) & 0x03)
729#define DT_TYPE_IO 0x1
730#define DT_TYPE_MEM32 0x2
731#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
732#define DT_CPUADDR_TO_ATTR(cpuaddr) (((cpuaddr) >> 48) & 0xFF)
733
734static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
735 unsigned long type,
736 unsigned int *tgt,
737 unsigned int *attr)
738{
739 const int na = 3, ns = 2;
740 const __be32 *range;
741 int rlen, nranges, rangesz, pna, i;
742
743 *tgt = -1;
744 *attr = -1;
745
746 range = of_get_property(np, "ranges", &rlen);
747 if (!range)
748 return -EINVAL;
749
750 pna = of_n_addr_cells(np);
751 rangesz = pna + na + ns;
752 nranges = rlen / sizeof(__be32) / rangesz;
753
754 for (i = 0; i < nranges; i++, range += rangesz) {
755 u32 flags = of_read_number(range, 1);
756 u32 slot = of_read_number(range + 1, 1);
757 u64 cpuaddr = of_read_number(range + na, pna);
758 unsigned long rtype;
759
760 if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
761 rtype = IORESOURCE_IO;
762 else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
763 rtype = IORESOURCE_MEM;
764 else
765 continue;
766
767 if (slot == PCI_SLOT(devfn) && type == rtype) {
768 *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
769 *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
770 return 0;
771 }
772 }
773
774 return -ENOENT;
775}
776
777#ifdef CONFIG_PM_SLEEP
778static int mvebu_pcie_suspend(struct device *dev)
779{
780 struct mvebu_pcie *pcie;
781 int i;
782
783 pcie = dev_get_drvdata(dev);
784 for (i = 0; i < pcie->nports; i++) {
785 struct mvebu_pcie_port *port = pcie->ports + i;
786 port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
787 }
788
789 return 0;
790}
791
792static int mvebu_pcie_resume(struct device *dev)
793{
794 struct mvebu_pcie *pcie;
795 int i;
796
797 pcie = dev_get_drvdata(dev);
798 for (i = 0; i < pcie->nports; i++) {
799 struct mvebu_pcie_port *port = pcie->ports + i;
800 mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
801 mvebu_pcie_setup_hw(port);
802 }
803
804 return 0;
805}
806#endif
807
808static void mvebu_pcie_port_clk_put(void *data)
809{
810 struct mvebu_pcie_port *port = data;
811
812 clk_put(port->clk);
813}
814
815static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
816 struct mvebu_pcie_port *port, struct device_node *child)
817{
818 struct device *dev = &pcie->pdev->dev;
819 enum of_gpio_flags flags;
820 int reset_gpio, ret;
821
822 port->pcie = pcie;
823
824 if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
825 dev_warn(dev, "ignoring %pOF, missing pcie-port property\n",
826 child);
827 goto skip;
828 }
829
830 if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
831 port->lane = 0;
832
833 port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
834 port->lane);
835 if (!port->name) {
836 ret = -ENOMEM;
837 goto err;
838 }
839
840 port->devfn = of_pci_get_devfn(child);
841 if (port->devfn < 0)
842 goto skip;
843
844 ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
845 &port->mem_target, &port->mem_attr);
846 if (ret < 0) {
847 dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
848 port->name);
849 goto skip;
850 }
851
852 if (resource_size(&pcie->io) != 0) {
853 mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
854 &port->io_target, &port->io_attr);
855 } else {
856 port->io_target = -1;
857 port->io_attr = -1;
858 }
859
860 reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
861 if (reset_gpio == -EPROBE_DEFER) {
862 ret = reset_gpio;
863 goto err;
864 }
865
866 if (gpio_is_valid(reset_gpio)) {
867 unsigned long gpio_flags;
868
869 port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
870 port->name);
871 if (!port->reset_name) {
872 ret = -ENOMEM;
873 goto err;
874 }
875
876 if (flags & OF_GPIO_ACTIVE_LOW) {
877 dev_info(dev, "%pOF: reset gpio is active low\n",
878 child);
879 gpio_flags = GPIOF_ACTIVE_LOW |
880 GPIOF_OUT_INIT_LOW;
881 } else {
882 gpio_flags = GPIOF_OUT_INIT_HIGH;
883 }
884
885 ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
886 port->reset_name);
887 if (ret) {
888 if (ret == -EPROBE_DEFER)
889 goto err;
890 goto skip;
891 }
892
893 port->reset_gpio = gpio_to_desc(reset_gpio);
894 }
895
896 port->clk = of_clk_get_by_name(child, NULL);
897 if (IS_ERR(port->clk)) {
898 dev_err(dev, "%s: cannot get clock\n", port->name);
899 goto skip;
900 }
901
902 ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
903 if (ret < 0) {
904 clk_put(port->clk);
905 goto err;
906 }
907
908 return 1;
909
910skip:
911 ret = 0;
912
913 /* In the case of skipping, we need to free these */
914 devm_kfree(dev, port->reset_name);
915 port->reset_name = NULL;
916 devm_kfree(dev, port->name);
917 port->name = NULL;
918
919err:
920 return ret;
921}
922
923/*
924 * Power up a PCIe port. PCIe requires the refclk to be stable for 100µs
925 * prior to releasing PERST. See table 2-4 in section 2.6.2 AC Specifications
926 * of the PCI Express Card Electromechanical Specification, 1.1.
927 */
928static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
929{
930 int ret;
931
932 ret = clk_prepare_enable(port->clk);
933 if (ret < 0)
934 return ret;
935
936 if (port->reset_gpio) {
937 u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
938
939 of_property_read_u32(port->dn, "reset-delay-us",
940 &reset_udelay);
941
942 udelay(100);
943
944 gpiod_set_value_cansleep(port->reset_gpio, 0);
945 msleep(reset_udelay / 1000);
946 }
947
948 return 0;
949}
950
951/*
952 * Power down a PCIe port. Strictly, PCIe requires us to place the card
953 * in D3hot state before asserting PERST#.
954 */
955static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
956{
957 gpiod_set_value_cansleep(port->reset_gpio, 1);
958
959 clk_disable_unprepare(port->clk);
960}
961
962/*
963 * We can't use devm_of_pci_get_host_bridge_resources() because we
964 * need to parse our special DT properties encoding the MEM and IO
965 * apertures.
966 */
967static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
968{
969 struct device *dev = &pcie->pdev->dev;
970 struct device_node *np = dev->of_node;
971 struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
972 int ret;
973
974 /* Get the bus range */
975 ret = of_pci_parse_bus_range(np, &pcie->busn);
976 if (ret) {
977 dev_err(dev, "failed to parse bus-range property: %d\n", ret);
978 return ret;
979 }
980 pci_add_resource(&bridge->windows, &pcie->busn);
981
982 /* Get the PCIe memory aperture */
983 mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
984 if (resource_size(&pcie->mem) == 0) {
985 dev_err(dev, "invalid memory aperture size\n");
986 return -EINVAL;
987 }
988
989 pcie->mem.name = "PCI MEM";
990 pci_add_resource(&bridge->windows, &pcie->mem);
991
992 /* Get the PCIe IO aperture */
993 mvebu_mbus_get_pcie_io_aperture(&pcie->io);
994
995 if (resource_size(&pcie->io) != 0) {
996 pcie->realio.flags = pcie->io.flags;
997 pcie->realio.start = PCIBIOS_MIN_IO;
998 pcie->realio.end = min_t(resource_size_t,
999 IO_SPACE_LIMIT - SZ_64K,
1000 resource_size(&pcie->io) - 1);
1001 pcie->realio.name = "PCI I/O";
1002
1003 pci_add_resource(&bridge->windows, &pcie->realio);
1004 }
1005
1006 return devm_request_pci_bus_resources(dev, &bridge->windows);
1007}
1008
1009/*
1010 * This is a copy of pci_host_probe(), except that it does the I/O
1011 * remap as the last step, once we are sure we won't fail.
1012 *
1013 * It should be removed once the I/O remap error handling issue has
1014 * been sorted out.
1015 */
1016static int mvebu_pci_host_probe(struct pci_host_bridge *bridge)
1017{
1018 struct mvebu_pcie *pcie;
1019 struct pci_bus *bus, *child;
1020 int ret;
1021
1022 ret = pci_scan_root_bus_bridge(bridge);
1023 if (ret < 0) {
1024 dev_err(bridge->dev.parent, "Scanning root bridge failed");
1025 return ret;
1026 }
1027
1028 pcie = pci_host_bridge_priv(bridge);
1029 if (resource_size(&pcie->io) != 0) {
1030 unsigned int i;
1031
1032 for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
1033 pci_ioremap_io(i, pcie->io.start + i);
1034 }
1035
1036 bus = bridge->bus;
1037
1038 /*
1039 * We insert PCI resources into the iomem_resource and
1040 * ioport_resource trees in either pci_bus_claim_resources()
1041 * or pci_bus_assign_resources().
1042 */
1043 if (pci_has_flag(PCI_PROBE_ONLY)) {
1044 pci_bus_claim_resources(bus);
1045 } else {
1046 pci_bus_size_bridges(bus);
1047 pci_bus_assign_resources(bus);
1048
1049 list_for_each_entry(child, &bus->children, node)
1050 pcie_bus_configure_settings(child);
1051 }
1052
1053 pci_bus_add_devices(bus);
1054 return 0;
1055}
1056
1057static int mvebu_pcie_probe(struct platform_device *pdev)
1058{
1059 struct device *dev = &pdev->dev;
1060 struct mvebu_pcie *pcie;
1061 struct pci_host_bridge *bridge;
1062 struct device_node *np = dev->of_node;
1063 struct device_node *child;
1064 int num, i, ret;
1065
1066 bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
1067 if (!bridge)
1068 return -ENOMEM;
1069
1070 pcie = pci_host_bridge_priv(bridge);
1071 pcie->pdev = pdev;
1072 platform_set_drvdata(pdev, pcie);
1073
1074 ret = mvebu_pcie_parse_request_resources(pcie);
1075 if (ret)
1076 return ret;
1077
1078 num = of_get_available_child_count(np);
1079
1080 pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
1081 if (!pcie->ports)
1082 return -ENOMEM;
1083
1084 i = 0;
1085 for_each_available_child_of_node(np, child) {
1086 struct mvebu_pcie_port *port = &pcie->ports[i];
1087
1088 ret = mvebu_pcie_parse_port(pcie, port, child);
1089 if (ret < 0) {
1090 of_node_put(child);
1091 return ret;
1092 } else if (ret == 0) {
1093 continue;
1094 }
1095
1096 port->dn = child;
1097 i++;
1098 }
1099 pcie->nports = i;
1100
1101 for (i = 0; i < pcie->nports; i++) {
1102 struct mvebu_pcie_port *port = &pcie->ports[i];
1103
1104 child = port->dn;
1105 if (!child)
1106 continue;
1107
1108 ret = mvebu_pcie_powerup(port);
1109 if (ret < 0)
1110 continue;
1111
1112 port->base = mvebu_pcie_map_registers(pdev, child, port);
1113 if (IS_ERR(port->base)) {
1114 dev_err(dev, "%s: cannot map registers\n", port->name);
1115 port->base = NULL;
1116 mvebu_pcie_powerdown(port);
1117 continue;
1118 }
1119
1120 mvebu_pcie_setup_hw(port);
1121 mvebu_pcie_set_local_dev_nr(port, 1);
1122 mvebu_pci_bridge_emul_init(port);
1123 }
1124
1125 pcie->nports = i;
1126
1127 bridge->sysdata = pcie;
1128 bridge->ops = &mvebu_pcie_ops;
1129 bridge->align_resource = mvebu_pcie_align_resource;
1130 bridge->msi = pcie->msi;
1131
1132 return mvebu_pci_host_probe(bridge);
1133}
1134
1135static const struct of_device_id mvebu_pcie_of_match_table[] = {
1136 { .compatible = "marvell,armada-xp-pcie", },
1137 { .compatible = "marvell,armada-370-pcie", },
1138 { .compatible = "marvell,dove-pcie", },
1139 { .compatible = "marvell,kirkwood-pcie", },
1140 {},
1141};
1142
1143static const struct dev_pm_ops mvebu_pcie_pm_ops = {
1144 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
1145};
1146
1147static struct platform_driver mvebu_pcie_driver = {
1148 .driver = {
1149 .name = "mvebu-pcie",
1150 .of_match_table = mvebu_pcie_of_match_table,
1151 /* driver unloading/unbinding currently not supported */
1152 .suppress_bind_attrs = true,
1153 .pm = &mvebu_pcie_pm_ops,
1154 },
1155 .probe = mvebu_pcie_probe,
1156};
1157builtin_platform_driver(mvebu_pcie_driver);