Loading...
1/*
2 * USB Attached SCSI
3 * Note that this is not the same as the USB Mass Storage driver
4 *
5 * Copyright Matthew Wilcox for Intel Corp, 2010
6 * Copyright Sarah Sharp for Intel Corp, 2010
7 *
8 * Distributed under the terms of the GNU GPL, version two.
9 */
10
11#include <linux/blkdev.h>
12#include <linux/slab.h>
13#include <linux/types.h>
14#include <linux/usb.h>
15#include <linux/usb/storage.h>
16
17#include <scsi/scsi.h>
18#include <scsi/scsi_dbg.h>
19#include <scsi/scsi_cmnd.h>
20#include <scsi/scsi_device.h>
21#include <scsi/scsi_host.h>
22#include <scsi/scsi_tcq.h>
23
24/* Common header for all IUs */
25struct iu {
26 __u8 iu_id;
27 __u8 rsvd1;
28 __be16 tag;
29};
30
31enum {
32 IU_ID_COMMAND = 0x01,
33 IU_ID_STATUS = 0x03,
34 IU_ID_RESPONSE = 0x04,
35 IU_ID_TASK_MGMT = 0x05,
36 IU_ID_READ_READY = 0x06,
37 IU_ID_WRITE_READY = 0x07,
38};
39
40struct command_iu {
41 __u8 iu_id;
42 __u8 rsvd1;
43 __be16 tag;
44 __u8 prio_attr;
45 __u8 rsvd5;
46 __u8 len;
47 __u8 rsvd7;
48 struct scsi_lun lun;
49 __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */
50};
51
52/*
53 * Also used for the Read Ready and Write Ready IUs since they have the
54 * same first four bytes
55 */
56struct sense_iu {
57 __u8 iu_id;
58 __u8 rsvd1;
59 __be16 tag;
60 __be16 status_qual;
61 __u8 status;
62 __u8 rsvd7[7];
63 __be16 len;
64 __u8 sense[SCSI_SENSE_BUFFERSIZE];
65};
66
67/*
68 * The r00-r01c specs define this version of the SENSE IU data structure.
69 * It's still in use by several different firmware releases.
70 */
71struct sense_iu_old {
72 __u8 iu_id;
73 __u8 rsvd1;
74 __be16 tag;
75 __be16 len;
76 __u8 status;
77 __u8 service_response;
78 __u8 sense[SCSI_SENSE_BUFFERSIZE];
79};
80
81enum {
82 CMD_PIPE_ID = 1,
83 STATUS_PIPE_ID = 2,
84 DATA_IN_PIPE_ID = 3,
85 DATA_OUT_PIPE_ID = 4,
86
87 UAS_SIMPLE_TAG = 0,
88 UAS_HEAD_TAG = 1,
89 UAS_ORDERED_TAG = 2,
90 UAS_ACA = 4,
91};
92
93struct uas_dev_info {
94 struct usb_interface *intf;
95 struct usb_device *udev;
96 int qdepth;
97 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
98 unsigned use_streams:1;
99 unsigned uas_sense_old:1;
100};
101
102enum {
103 ALLOC_STATUS_URB = (1 << 0),
104 SUBMIT_STATUS_URB = (1 << 1),
105 ALLOC_DATA_IN_URB = (1 << 2),
106 SUBMIT_DATA_IN_URB = (1 << 3),
107 ALLOC_DATA_OUT_URB = (1 << 4),
108 SUBMIT_DATA_OUT_URB = (1 << 5),
109 ALLOC_CMD_URB = (1 << 6),
110 SUBMIT_CMD_URB = (1 << 7),
111};
112
113/* Overrides scsi_pointer */
114struct uas_cmd_info {
115 unsigned int state;
116 unsigned int stream;
117 struct urb *cmd_urb;
118 struct urb *status_urb;
119 struct urb *data_in_urb;
120 struct urb *data_out_urb;
121 struct list_head list;
122};
123
124/* I hate forward declarations, but I actually have a loop */
125static int uas_submit_urbs(struct scsi_cmnd *cmnd,
126 struct uas_dev_info *devinfo, gfp_t gfp);
127
128static DEFINE_SPINLOCK(uas_work_lock);
129static LIST_HEAD(uas_work_list);
130
131static void uas_do_work(struct work_struct *work)
132{
133 struct uas_cmd_info *cmdinfo;
134 struct list_head list;
135
136 spin_lock_irq(&uas_work_lock);
137 list_replace_init(&uas_work_list, &list);
138 spin_unlock_irq(&uas_work_lock);
139
140 list_for_each_entry(cmdinfo, &list, list) {
141 struct scsi_pointer *scp = (void *)cmdinfo;
142 struct scsi_cmnd *cmnd = container_of(scp,
143 struct scsi_cmnd, SCp);
144 uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
145 }
146}
147
148static DECLARE_WORK(uas_work, uas_do_work);
149
150static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
151{
152 struct sense_iu *sense_iu = urb->transfer_buffer;
153 struct scsi_device *sdev = cmnd->device;
154
155 if (urb->actual_length > 16) {
156 unsigned len = be16_to_cpup(&sense_iu->len);
157 if (len + 16 != urb->actual_length) {
158 int newlen = min(len + 16, urb->actual_length) - 16;
159 if (newlen < 0)
160 newlen = 0;
161 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
162 "disagrees with IU sense data length %d, "
163 "using %d bytes of sense data\n", __func__,
164 urb->actual_length, len, newlen);
165 len = newlen;
166 }
167 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
168 }
169
170 cmnd->result = sense_iu->status;
171 if (sdev->current_cmnd)
172 sdev->current_cmnd = NULL;
173 cmnd->scsi_done(cmnd);
174 usb_free_urb(urb);
175}
176
177static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
178{
179 struct sense_iu_old *sense_iu = urb->transfer_buffer;
180 struct scsi_device *sdev = cmnd->device;
181
182 if (urb->actual_length > 8) {
183 unsigned len = be16_to_cpup(&sense_iu->len) - 2;
184 if (len + 8 != urb->actual_length) {
185 int newlen = min(len + 8, urb->actual_length) - 8;
186 if (newlen < 0)
187 newlen = 0;
188 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
189 "disagrees with IU sense data length %d, "
190 "using %d bytes of sense data\n", __func__,
191 urb->actual_length, len, newlen);
192 len = newlen;
193 }
194 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
195 }
196
197 cmnd->result = sense_iu->status;
198 if (sdev->current_cmnd)
199 sdev->current_cmnd = NULL;
200 cmnd->scsi_done(cmnd);
201 usb_free_urb(urb);
202}
203
204static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
205 unsigned direction)
206{
207 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
208 int err;
209
210 cmdinfo->state = direction | SUBMIT_STATUS_URB;
211 err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
212 if (err) {
213 spin_lock(&uas_work_lock);
214 list_add_tail(&cmdinfo->list, &uas_work_list);
215 spin_unlock(&uas_work_lock);
216 schedule_work(&uas_work);
217 }
218}
219
220static void uas_stat_cmplt(struct urb *urb)
221{
222 struct iu *iu = urb->transfer_buffer;
223 struct scsi_device *sdev = urb->context;
224 struct uas_dev_info *devinfo = sdev->hostdata;
225 struct scsi_cmnd *cmnd;
226 u16 tag;
227
228 if (urb->status) {
229 dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status);
230 usb_free_urb(urb);
231 return;
232 }
233
234 tag = be16_to_cpup(&iu->tag) - 1;
235 if (sdev->current_cmnd)
236 cmnd = sdev->current_cmnd;
237 else
238 cmnd = scsi_find_tag(sdev, tag);
239 if (!cmnd)
240 return;
241
242 switch (iu->iu_id) {
243 case IU_ID_STATUS:
244 if (urb->actual_length < 16)
245 devinfo->uas_sense_old = 1;
246 if (devinfo->uas_sense_old)
247 uas_sense_old(urb, cmnd);
248 else
249 uas_sense(urb, cmnd);
250 break;
251 case IU_ID_READ_READY:
252 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
253 break;
254 case IU_ID_WRITE_READY:
255 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
256 break;
257 default:
258 scmd_printk(KERN_ERR, cmnd,
259 "Bogus IU (%d) received on status pipe\n", iu->iu_id);
260 }
261}
262
263static void uas_data_cmplt(struct urb *urb)
264{
265 struct scsi_data_buffer *sdb = urb->context;
266 sdb->resid = sdb->length - urb->actual_length;
267 usb_free_urb(urb);
268}
269
270static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
271 unsigned int pipe, u16 stream_id,
272 struct scsi_data_buffer *sdb,
273 enum dma_data_direction dir)
274{
275 struct usb_device *udev = devinfo->udev;
276 struct urb *urb = usb_alloc_urb(0, gfp);
277
278 if (!urb)
279 goto out;
280 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt,
281 sdb);
282 if (devinfo->use_streams)
283 urb->stream_id = stream_id;
284 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
285 urb->sg = sdb->table.sgl;
286 out:
287 return urb;
288}
289
290static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
291 struct scsi_cmnd *cmnd, u16 stream_id)
292{
293 struct usb_device *udev = devinfo->udev;
294 struct urb *urb = usb_alloc_urb(0, gfp);
295 struct sense_iu *iu;
296
297 if (!urb)
298 goto out;
299
300 iu = kzalloc(sizeof(*iu), gfp);
301 if (!iu)
302 goto free;
303
304 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
305 uas_stat_cmplt, cmnd->device);
306 urb->stream_id = stream_id;
307 urb->transfer_flags |= URB_FREE_BUFFER;
308 out:
309 return urb;
310 free:
311 usb_free_urb(urb);
312 return NULL;
313}
314
315static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
316 struct scsi_cmnd *cmnd, u16 stream_id)
317{
318 struct usb_device *udev = devinfo->udev;
319 struct scsi_device *sdev = cmnd->device;
320 struct urb *urb = usb_alloc_urb(0, gfp);
321 struct command_iu *iu;
322 int len;
323
324 if (!urb)
325 goto out;
326
327 len = cmnd->cmd_len - 16;
328 if (len < 0)
329 len = 0;
330 len = ALIGN(len, 4);
331 iu = kzalloc(sizeof(*iu) + len, gfp);
332 if (!iu)
333 goto free;
334
335 iu->iu_id = IU_ID_COMMAND;
336 iu->tag = cpu_to_be16(stream_id);
337 iu->prio_attr = UAS_SIMPLE_TAG;
338 iu->len = len;
339 int_to_scsilun(sdev->lun, &iu->lun);
340 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
341
342 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
343 usb_free_urb, NULL);
344 urb->transfer_flags |= URB_FREE_BUFFER;
345 out:
346 return urb;
347 free:
348 usb_free_urb(urb);
349 return NULL;
350}
351
352/*
353 * Why should I request the Status IU before sending the Command IU? Spec
354 * says to, but also says the device may receive them in any order. Seems
355 * daft to me.
356 */
357
358static int uas_submit_urbs(struct scsi_cmnd *cmnd,
359 struct uas_dev_info *devinfo, gfp_t gfp)
360{
361 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
362
363 if (cmdinfo->state & ALLOC_STATUS_URB) {
364 cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
365 cmdinfo->stream);
366 if (!cmdinfo->status_urb)
367 return SCSI_MLQUEUE_DEVICE_BUSY;
368 cmdinfo->state &= ~ALLOC_STATUS_URB;
369 }
370
371 if (cmdinfo->state & SUBMIT_STATUS_URB) {
372 if (usb_submit_urb(cmdinfo->status_urb, gfp)) {
373 scmd_printk(KERN_INFO, cmnd,
374 "sense urb submission failure\n");
375 return SCSI_MLQUEUE_DEVICE_BUSY;
376 }
377 cmdinfo->state &= ~SUBMIT_STATUS_URB;
378 }
379
380 if (cmdinfo->state & ALLOC_DATA_IN_URB) {
381 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
382 devinfo->data_in_pipe, cmdinfo->stream,
383 scsi_in(cmnd), DMA_FROM_DEVICE);
384 if (!cmdinfo->data_in_urb)
385 return SCSI_MLQUEUE_DEVICE_BUSY;
386 cmdinfo->state &= ~ALLOC_DATA_IN_URB;
387 }
388
389 if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
390 if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) {
391 scmd_printk(KERN_INFO, cmnd,
392 "data in urb submission failure\n");
393 return SCSI_MLQUEUE_DEVICE_BUSY;
394 }
395 cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
396 }
397
398 if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
399 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
400 devinfo->data_out_pipe, cmdinfo->stream,
401 scsi_out(cmnd), DMA_TO_DEVICE);
402 if (!cmdinfo->data_out_urb)
403 return SCSI_MLQUEUE_DEVICE_BUSY;
404 cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
405 }
406
407 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
408 if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) {
409 scmd_printk(KERN_INFO, cmnd,
410 "data out urb submission failure\n");
411 return SCSI_MLQUEUE_DEVICE_BUSY;
412 }
413 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
414 }
415
416 if (cmdinfo->state & ALLOC_CMD_URB) {
417 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd,
418 cmdinfo->stream);
419 if (!cmdinfo->cmd_urb)
420 return SCSI_MLQUEUE_DEVICE_BUSY;
421 cmdinfo->state &= ~ALLOC_CMD_URB;
422 }
423
424 if (cmdinfo->state & SUBMIT_CMD_URB) {
425 if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) {
426 scmd_printk(KERN_INFO, cmnd,
427 "cmd urb submission failure\n");
428 return SCSI_MLQUEUE_DEVICE_BUSY;
429 }
430 cmdinfo->state &= ~SUBMIT_CMD_URB;
431 }
432
433 return 0;
434}
435
436static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
437 void (*done)(struct scsi_cmnd *))
438{
439 struct scsi_device *sdev = cmnd->device;
440 struct uas_dev_info *devinfo = sdev->hostdata;
441 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
442 int err;
443
444 BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
445
446 if (!cmdinfo->status_urb && sdev->current_cmnd)
447 return SCSI_MLQUEUE_DEVICE_BUSY;
448
449 if (blk_rq_tagged(cmnd->request)) {
450 cmdinfo->stream = cmnd->request->tag + 1;
451 } else {
452 sdev->current_cmnd = cmnd;
453 cmdinfo->stream = 1;
454 }
455
456 cmnd->scsi_done = done;
457
458 cmdinfo->state = ALLOC_STATUS_URB | SUBMIT_STATUS_URB |
459 ALLOC_CMD_URB | SUBMIT_CMD_URB;
460
461 switch (cmnd->sc_data_direction) {
462 case DMA_FROM_DEVICE:
463 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
464 break;
465 case DMA_BIDIRECTIONAL:
466 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
467 case DMA_TO_DEVICE:
468 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
469 case DMA_NONE:
470 break;
471 }
472
473 if (!devinfo->use_streams) {
474 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
475 cmdinfo->stream = 0;
476 }
477
478 err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
479 if (err) {
480 /* If we did nothing, give up now */
481 if (cmdinfo->state & SUBMIT_STATUS_URB) {
482 usb_free_urb(cmdinfo->status_urb);
483 return SCSI_MLQUEUE_DEVICE_BUSY;
484 }
485 spin_lock(&uas_work_lock);
486 list_add_tail(&cmdinfo->list, &uas_work_list);
487 spin_unlock(&uas_work_lock);
488 schedule_work(&uas_work);
489 }
490
491 return 0;
492}
493
494static DEF_SCSI_QCMD(uas_queuecommand)
495
496static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
497{
498 struct scsi_device *sdev = cmnd->device;
499 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
500 cmnd->request->tag);
501
502/* XXX: Send ABORT TASK Task Management command */
503 return FAILED;
504}
505
506static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
507{
508 struct scsi_device *sdev = cmnd->device;
509 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
510 cmnd->request->tag);
511
512/* XXX: Send LOGICAL UNIT RESET Task Management command */
513 return FAILED;
514}
515
516static int uas_eh_target_reset_handler(struct scsi_cmnd *cmnd)
517{
518 struct scsi_device *sdev = cmnd->device;
519 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
520 cmnd->request->tag);
521
522/* XXX: Can we reset just the one USB interface?
523 * Would calling usb_set_interface() have the right effect?
524 */
525 return FAILED;
526}
527
528static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
529{
530 struct scsi_device *sdev = cmnd->device;
531 struct uas_dev_info *devinfo = sdev->hostdata;
532 struct usb_device *udev = devinfo->udev;
533
534 sdev_printk(KERN_INFO, sdev, "%s tag %d\n", __func__,
535 cmnd->request->tag);
536
537 if (usb_reset_device(udev))
538 return SUCCESS;
539
540 return FAILED;
541}
542
543static int uas_slave_alloc(struct scsi_device *sdev)
544{
545 sdev->hostdata = (void *)sdev->host->hostdata[0];
546 return 0;
547}
548
549static int uas_slave_configure(struct scsi_device *sdev)
550{
551 struct uas_dev_info *devinfo = sdev->hostdata;
552 scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
553 scsi_activate_tcq(sdev, devinfo->qdepth - 1);
554 return 0;
555}
556
557static struct scsi_host_template uas_host_template = {
558 .module = THIS_MODULE,
559 .name = "uas",
560 .queuecommand = uas_queuecommand,
561 .slave_alloc = uas_slave_alloc,
562 .slave_configure = uas_slave_configure,
563 .eh_abort_handler = uas_eh_abort_handler,
564 .eh_device_reset_handler = uas_eh_device_reset_handler,
565 .eh_target_reset_handler = uas_eh_target_reset_handler,
566 .eh_bus_reset_handler = uas_eh_bus_reset_handler,
567 .can_queue = 65536, /* Is there a limit on the _host_ ? */
568 .this_id = -1,
569 .sg_tablesize = SG_NONE,
570 .cmd_per_lun = 1, /* until we override it */
571 .skip_settle_delay = 1,
572 .ordered_tag = 1,
573};
574
575static struct usb_device_id uas_usb_ids[] = {
576 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
577 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
578 /* 0xaa is a prototype device I happen to have access to */
579 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) },
580 { }
581};
582MODULE_DEVICE_TABLE(usb, uas_usb_ids);
583
584static int uas_is_interface(struct usb_host_interface *intf)
585{
586 return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
587 intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
588 intf->desc.bInterfaceProtocol == USB_PR_UAS);
589}
590
591static int uas_switch_interface(struct usb_device *udev,
592 struct usb_interface *intf)
593{
594 int i;
595
596 if (uas_is_interface(intf->cur_altsetting))
597 return 0;
598
599 for (i = 0; i < intf->num_altsetting; i++) {
600 struct usb_host_interface *alt = &intf->altsetting[i];
601 if (alt == intf->cur_altsetting)
602 continue;
603 if (uas_is_interface(alt))
604 return usb_set_interface(udev,
605 alt->desc.bInterfaceNumber,
606 alt->desc.bAlternateSetting);
607 }
608
609 return -ENODEV;
610}
611
612static void uas_configure_endpoints(struct uas_dev_info *devinfo)
613{
614 struct usb_host_endpoint *eps[4] = { };
615 struct usb_interface *intf = devinfo->intf;
616 struct usb_device *udev = devinfo->udev;
617 struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint;
618 unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints;
619
620 devinfo->uas_sense_old = 0;
621
622 for (i = 0; i < n_endpoints; i++) {
623 unsigned char *extra = endpoint[i].extra;
624 int len = endpoint[i].extralen;
625 while (len > 1) {
626 if (extra[1] == USB_DT_PIPE_USAGE) {
627 unsigned pipe_id = extra[2];
628 if (pipe_id > 0 && pipe_id < 5)
629 eps[pipe_id - 1] = &endpoint[i];
630 break;
631 }
632 len -= extra[0];
633 extra += extra[0];
634 }
635 }
636
637 /*
638 * Assume that if we didn't find a control pipe descriptor, we're
639 * using a device with old firmware that happens to be set up like
640 * this.
641 */
642 if (!eps[0]) {
643 devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1);
644 devinfo->status_pipe = usb_rcvbulkpipe(udev, 1);
645 devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2);
646 devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2);
647
648 eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe);
649 eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
650 eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
651 } else {
652 devinfo->cmd_pipe = usb_sndbulkpipe(udev,
653 eps[0]->desc.bEndpointAddress);
654 devinfo->status_pipe = usb_rcvbulkpipe(udev,
655 eps[1]->desc.bEndpointAddress);
656 devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
657 eps[2]->desc.bEndpointAddress);
658 devinfo->data_out_pipe = usb_sndbulkpipe(udev,
659 eps[3]->desc.bEndpointAddress);
660 }
661
662 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256,
663 GFP_KERNEL);
664 if (devinfo->qdepth < 0) {
665 devinfo->qdepth = 256;
666 devinfo->use_streams = 0;
667 } else {
668 devinfo->use_streams = 1;
669 }
670}
671
672/*
673 * XXX: What I'd like to do here is register a SCSI host for each USB host in
674 * the system. Follow usb-storage's design of registering a SCSI host for
675 * each USB device for the moment. Can implement this by walking up the
676 * USB hierarchy until we find a USB host.
677 */
678static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
679{
680 int result;
681 struct Scsi_Host *shost;
682 struct uas_dev_info *devinfo;
683 struct usb_device *udev = interface_to_usbdev(intf);
684
685 if (uas_switch_interface(udev, intf))
686 return -ENODEV;
687
688 devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL);
689 if (!devinfo)
690 return -ENOMEM;
691
692 result = -ENOMEM;
693 shost = scsi_host_alloc(&uas_host_template, sizeof(void *));
694 if (!shost)
695 goto free;
696
697 shost->max_cmd_len = 16 + 252;
698 shost->max_id = 1;
699 shost->sg_tablesize = udev->bus->sg_tablesize;
700
701 result = scsi_add_host(shost, &intf->dev);
702 if (result)
703 goto free;
704 shost->hostdata[0] = (unsigned long)devinfo;
705
706 devinfo->intf = intf;
707 devinfo->udev = udev;
708 uas_configure_endpoints(devinfo);
709
710 scsi_scan_host(shost);
711 usb_set_intfdata(intf, shost);
712 return result;
713 free:
714 kfree(devinfo);
715 if (shost)
716 scsi_host_put(shost);
717 return result;
718}
719
720static int uas_pre_reset(struct usb_interface *intf)
721{
722/* XXX: Need to return 1 if it's not our device in error handling */
723 return 0;
724}
725
726static int uas_post_reset(struct usb_interface *intf)
727{
728/* XXX: Need to return 1 if it's not our device in error handling */
729 return 0;
730}
731
732static void uas_disconnect(struct usb_interface *intf)
733{
734 struct usb_device *udev = interface_to_usbdev(intf);
735 struct usb_host_endpoint *eps[3];
736 struct Scsi_Host *shost = usb_get_intfdata(intf);
737 struct uas_dev_info *devinfo = (void *)shost->hostdata[0];
738
739 scsi_remove_host(shost);
740
741 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
742 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
743 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
744 usb_free_streams(intf, eps, 3, GFP_KERNEL);
745
746 kfree(devinfo);
747}
748
749/*
750 * XXX: Should this plug into libusual so we can auto-upgrade devices from
751 * Bulk-Only to UAS?
752 */
753static struct usb_driver uas_driver = {
754 .name = "uas",
755 .probe = uas_probe,
756 .disconnect = uas_disconnect,
757 .pre_reset = uas_pre_reset,
758 .post_reset = uas_post_reset,
759 .id_table = uas_usb_ids,
760};
761
762static int uas_init(void)
763{
764 return usb_register(&uas_driver);
765}
766
767static void uas_exit(void)
768{
769 usb_deregister(&uas_driver);
770}
771
772module_init(uas_init);
773module_exit(uas_exit);
774
775MODULE_LICENSE("GPL");
776MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * USB Attached SCSI
4 * Note that this is not the same as the USB Mass Storage driver
5 *
6 * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7 * Copyright Matthew Wilcox for Intel Corp, 2010
8 * Copyright Sarah Sharp for Intel Corp, 2010
9 */
10
11#include <linux/blkdev.h>
12#include <linux/slab.h>
13#include <linux/types.h>
14#include <linux/module.h>
15#include <linux/usb.h>
16#include <linux/usb_usual.h>
17#include <linux/usb/hcd.h>
18#include <linux/usb/storage.h>
19#include <linux/usb/uas.h>
20
21#include <scsi/scsi.h>
22#include <scsi/scsi_eh.h>
23#include <scsi/scsi_dbg.h>
24#include <scsi/scsi_cmnd.h>
25#include <scsi/scsi_device.h>
26#include <scsi/scsi_host.h>
27#include <scsi/scsi_tcq.h>
28
29#include "uas-detect.h"
30#include "scsiglue.h"
31
32#define MAX_CMNDS 256
33
34struct uas_dev_info {
35 struct usb_interface *intf;
36 struct usb_device *udev;
37 struct usb_anchor cmd_urbs;
38 struct usb_anchor sense_urbs;
39 struct usb_anchor data_urbs;
40 unsigned long flags;
41 int qdepth, resetting;
42 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
43 unsigned use_streams:1;
44 unsigned shutdown:1;
45 struct scsi_cmnd *cmnd[MAX_CMNDS];
46 spinlock_t lock;
47 struct work_struct work;
48 struct work_struct scan_work; /* for async scanning */
49};
50
51enum {
52 SUBMIT_STATUS_URB = BIT(1),
53 ALLOC_DATA_IN_URB = BIT(2),
54 SUBMIT_DATA_IN_URB = BIT(3),
55 ALLOC_DATA_OUT_URB = BIT(4),
56 SUBMIT_DATA_OUT_URB = BIT(5),
57 ALLOC_CMD_URB = BIT(6),
58 SUBMIT_CMD_URB = BIT(7),
59 COMMAND_INFLIGHT = BIT(8),
60 DATA_IN_URB_INFLIGHT = BIT(9),
61 DATA_OUT_URB_INFLIGHT = BIT(10),
62 COMMAND_ABORTED = BIT(11),
63 IS_IN_WORK_LIST = BIT(12),
64};
65
66/* Overrides scsi_pointer */
67struct uas_cmd_info {
68 unsigned int state;
69 unsigned int uas_tag;
70 struct urb *cmd_urb;
71 struct urb *data_in_urb;
72 struct urb *data_out_urb;
73};
74
75/* I hate forward declarations, but I actually have a loop */
76static int uas_submit_urbs(struct scsi_cmnd *cmnd,
77 struct uas_dev_info *devinfo);
78static void uas_do_work(struct work_struct *work);
79static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
80static void uas_free_streams(struct uas_dev_info *devinfo);
81static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
82 int status);
83
84/*
85 * This driver needs its own workqueue, as we need to control memory allocation.
86 *
87 * In the course of error handling and power management uas_wait_for_pending_cmnds()
88 * needs to flush pending work items. In these contexts we cannot allocate memory
89 * by doing block IO as we would deadlock. For the same reason we cannot wait
90 * for anything allocating memory not heeding these constraints.
91 *
92 * So we have to control all work items that can be on the workqueue we flush.
93 * Hence we cannot share a queue and need our own.
94 */
95static struct workqueue_struct *workqueue;
96
97static void uas_do_work(struct work_struct *work)
98{
99 struct uas_dev_info *devinfo =
100 container_of(work, struct uas_dev_info, work);
101 struct uas_cmd_info *cmdinfo;
102 struct scsi_cmnd *cmnd;
103 unsigned long flags;
104 int i, err;
105
106 spin_lock_irqsave(&devinfo->lock, flags);
107
108 if (devinfo->resetting)
109 goto out;
110
111 for (i = 0; i < devinfo->qdepth; i++) {
112 if (!devinfo->cmnd[i])
113 continue;
114
115 cmnd = devinfo->cmnd[i];
116 cmdinfo = (void *)&cmnd->SCp;
117
118 if (!(cmdinfo->state & IS_IN_WORK_LIST))
119 continue;
120
121 err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
122 if (!err)
123 cmdinfo->state &= ~IS_IN_WORK_LIST;
124 else
125 queue_work(workqueue, &devinfo->work);
126 }
127out:
128 spin_unlock_irqrestore(&devinfo->lock, flags);
129}
130
131static void uas_scan_work(struct work_struct *work)
132{
133 struct uas_dev_info *devinfo =
134 container_of(work, struct uas_dev_info, scan_work);
135 struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
136
137 dev_dbg(&devinfo->intf->dev, "starting scan\n");
138 scsi_scan_host(shost);
139 dev_dbg(&devinfo->intf->dev, "scan complete\n");
140}
141
142static void uas_add_work(struct uas_cmd_info *cmdinfo)
143{
144 struct scsi_pointer *scp = (void *)cmdinfo;
145 struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
146 struct uas_dev_info *devinfo = cmnd->device->hostdata;
147
148 lockdep_assert_held(&devinfo->lock);
149 cmdinfo->state |= IS_IN_WORK_LIST;
150 queue_work(workqueue, &devinfo->work);
151}
152
153static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
154{
155 struct uas_cmd_info *cmdinfo;
156 struct scsi_cmnd *cmnd;
157 unsigned long flags;
158 int i, err;
159
160 spin_lock_irqsave(&devinfo->lock, flags);
161 for (i = 0; i < devinfo->qdepth; i++) {
162 if (!devinfo->cmnd[i])
163 continue;
164
165 cmnd = devinfo->cmnd[i];
166 cmdinfo = (void *)&cmnd->SCp;
167 uas_log_cmd_state(cmnd, __func__, 0);
168 /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
169 cmdinfo->state &= ~COMMAND_INFLIGHT;
170 cmnd->result = result << 16;
171 err = uas_try_complete(cmnd, __func__);
172 WARN_ON(err != 0);
173 }
174 spin_unlock_irqrestore(&devinfo->lock, flags);
175}
176
177static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
178{
179 struct sense_iu *sense_iu = urb->transfer_buffer;
180 struct scsi_device *sdev = cmnd->device;
181
182 if (urb->actual_length > 16) {
183 unsigned len = be16_to_cpup(&sense_iu->len);
184 if (len + 16 != urb->actual_length) {
185 int newlen = min(len + 16, urb->actual_length) - 16;
186 if (newlen < 0)
187 newlen = 0;
188 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
189 "disagrees with IU sense data length %d, "
190 "using %d bytes of sense data\n", __func__,
191 urb->actual_length, len, newlen);
192 len = newlen;
193 }
194 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
195 }
196
197 cmnd->result = sense_iu->status;
198}
199
200static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
201 int status)
202{
203 struct uas_cmd_info *ci = (void *)&cmnd->SCp;
204 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
205
206 if (status == -ENODEV) /* too late */
207 return;
208
209 scmd_printk(KERN_INFO, cmnd,
210 "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
211 prefix, status, cmdinfo->uas_tag,
212 (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "",
213 (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "",
214 (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "",
215 (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "",
216 (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "",
217 (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "",
218 (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "",
219 (ci->state & COMMAND_INFLIGHT) ? " CMD" : "",
220 (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "",
221 (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "",
222 (ci->state & COMMAND_ABORTED) ? " abort" : "",
223 (ci->state & IS_IN_WORK_LIST) ? " work" : "");
224 scsi_print_command(cmnd);
225}
226
227static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
228{
229 struct uas_cmd_info *cmdinfo;
230
231 if (!cmnd)
232 return;
233
234 cmdinfo = (void *)&cmnd->SCp;
235
236 if (cmdinfo->state & SUBMIT_CMD_URB)
237 usb_free_urb(cmdinfo->cmd_urb);
238
239 /* data urbs may have never gotten their submit flag set */
240 if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
241 usb_free_urb(cmdinfo->data_in_urb);
242 if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
243 usb_free_urb(cmdinfo->data_out_urb);
244}
245
246static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
247{
248 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
249 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
250
251 lockdep_assert_held(&devinfo->lock);
252 if (cmdinfo->state & (COMMAND_INFLIGHT |
253 DATA_IN_URB_INFLIGHT |
254 DATA_OUT_URB_INFLIGHT |
255 COMMAND_ABORTED))
256 return -EBUSY;
257 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
258 uas_free_unsubmitted_urbs(cmnd);
259 cmnd->scsi_done(cmnd);
260 return 0;
261}
262
263static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
264 unsigned direction)
265{
266 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
267 int err;
268
269 cmdinfo->state |= direction | SUBMIT_STATUS_URB;
270 err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
271 if (err) {
272 uas_add_work(cmdinfo);
273 }
274}
275
276static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
277{
278 u8 response_code = riu->response_code;
279
280 switch (response_code) {
281 case RC_INCORRECT_LUN:
282 cmnd->result = DID_BAD_TARGET << 16;
283 break;
284 case RC_TMF_SUCCEEDED:
285 cmnd->result = DID_OK << 16;
286 break;
287 case RC_TMF_NOT_SUPPORTED:
288 cmnd->result = DID_TARGET_FAILURE << 16;
289 break;
290 default:
291 uas_log_cmd_state(cmnd, "response iu", response_code);
292 cmnd->result = DID_ERROR << 16;
293 break;
294 }
295
296 return response_code == RC_TMF_SUCCEEDED;
297}
298
299static void uas_stat_cmplt(struct urb *urb)
300{
301 struct iu *iu = urb->transfer_buffer;
302 struct Scsi_Host *shost = urb->context;
303 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
304 struct urb *data_in_urb = NULL;
305 struct urb *data_out_urb = NULL;
306 struct scsi_cmnd *cmnd;
307 struct uas_cmd_info *cmdinfo;
308 unsigned long flags;
309 unsigned int idx;
310 int status = urb->status;
311 bool success;
312
313 spin_lock_irqsave(&devinfo->lock, flags);
314
315 if (devinfo->resetting)
316 goto out;
317
318 if (status) {
319 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
320 dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
321 goto out;
322 }
323
324 idx = be16_to_cpup(&iu->tag) - 1;
325 if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
326 dev_err(&urb->dev->dev,
327 "stat urb: no pending cmd for uas-tag %d\n", idx + 1);
328 goto out;
329 }
330
331 cmnd = devinfo->cmnd[idx];
332 cmdinfo = (void *)&cmnd->SCp;
333
334 if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
335 uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
336 goto out;
337 }
338
339 switch (iu->iu_id) {
340 case IU_ID_STATUS:
341 uas_sense(urb, cmnd);
342 if (cmnd->result != 0) {
343 /* cancel data transfers on error */
344 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
345 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
346 }
347 cmdinfo->state &= ~COMMAND_INFLIGHT;
348 uas_try_complete(cmnd, __func__);
349 break;
350 case IU_ID_READ_READY:
351 if (!cmdinfo->data_in_urb ||
352 (cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
353 uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
354 break;
355 }
356 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
357 break;
358 case IU_ID_WRITE_READY:
359 if (!cmdinfo->data_out_urb ||
360 (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
361 uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
362 break;
363 }
364 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
365 break;
366 case IU_ID_RESPONSE:
367 cmdinfo->state &= ~COMMAND_INFLIGHT;
368 success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
369 if (!success) {
370 /* Error, cancel data transfers */
371 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
372 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
373 }
374 uas_try_complete(cmnd, __func__);
375 break;
376 default:
377 uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
378 }
379out:
380 usb_free_urb(urb);
381 spin_unlock_irqrestore(&devinfo->lock, flags);
382
383 /* Unlinking of data urbs must be done without holding the lock */
384 if (data_in_urb) {
385 usb_unlink_urb(data_in_urb);
386 usb_put_urb(data_in_urb);
387 }
388 if (data_out_urb) {
389 usb_unlink_urb(data_out_urb);
390 usb_put_urb(data_out_urb);
391 }
392}
393
394static void uas_data_cmplt(struct urb *urb)
395{
396 struct scsi_cmnd *cmnd = urb->context;
397 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
398 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
399 struct scsi_data_buffer *sdb = &cmnd->sdb;
400 unsigned long flags;
401 int status = urb->status;
402
403 spin_lock_irqsave(&devinfo->lock, flags);
404
405 if (cmdinfo->data_in_urb == urb) {
406 cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
407 cmdinfo->data_in_urb = NULL;
408 } else if (cmdinfo->data_out_urb == urb) {
409 cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
410 cmdinfo->data_out_urb = NULL;
411 }
412
413 if (devinfo->resetting)
414 goto out;
415
416 /* Data urbs should not complete before the cmd urb is submitted */
417 if (cmdinfo->state & SUBMIT_CMD_URB) {
418 uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
419 goto out;
420 }
421
422 if (status) {
423 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
424 uas_log_cmd_state(cmnd, "data cmplt err", status);
425 /* error: no data transfered */
426 scsi_set_resid(cmnd, sdb->length);
427 } else {
428 scsi_set_resid(cmnd, sdb->length - urb->actual_length);
429 }
430 uas_try_complete(cmnd, __func__);
431out:
432 usb_free_urb(urb);
433 spin_unlock_irqrestore(&devinfo->lock, flags);
434}
435
436static void uas_cmd_cmplt(struct urb *urb)
437{
438 if (urb->status)
439 dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
440
441 usb_free_urb(urb);
442}
443
444static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
445 struct scsi_cmnd *cmnd,
446 enum dma_data_direction dir)
447{
448 struct usb_device *udev = devinfo->udev;
449 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
450 struct urb *urb = usb_alloc_urb(0, gfp);
451 struct scsi_data_buffer *sdb = &cmnd->sdb;
452 unsigned int pipe = (dir == DMA_FROM_DEVICE)
453 ? devinfo->data_in_pipe : devinfo->data_out_pipe;
454
455 if (!urb)
456 goto out;
457 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
458 uas_data_cmplt, cmnd);
459 if (devinfo->use_streams)
460 urb->stream_id = cmdinfo->uas_tag;
461 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
462 urb->sg = sdb->table.sgl;
463 out:
464 return urb;
465}
466
467static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
468 struct scsi_cmnd *cmnd)
469{
470 struct usb_device *udev = devinfo->udev;
471 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
472 struct urb *urb = usb_alloc_urb(0, gfp);
473 struct sense_iu *iu;
474
475 if (!urb)
476 goto out;
477
478 iu = kzalloc(sizeof(*iu), gfp);
479 if (!iu)
480 goto free;
481
482 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
483 uas_stat_cmplt, cmnd->device->host);
484 if (devinfo->use_streams)
485 urb->stream_id = cmdinfo->uas_tag;
486 urb->transfer_flags |= URB_FREE_BUFFER;
487 out:
488 return urb;
489 free:
490 usb_free_urb(urb);
491 return NULL;
492}
493
494static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
495 struct scsi_cmnd *cmnd)
496{
497 struct usb_device *udev = devinfo->udev;
498 struct scsi_device *sdev = cmnd->device;
499 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
500 struct urb *urb = usb_alloc_urb(0, gfp);
501 struct command_iu *iu;
502 int len;
503
504 if (!urb)
505 goto out;
506
507 len = cmnd->cmd_len - 16;
508 if (len < 0)
509 len = 0;
510 len = ALIGN(len, 4);
511 iu = kzalloc(sizeof(*iu) + len, gfp);
512 if (!iu)
513 goto free;
514
515 iu->iu_id = IU_ID_COMMAND;
516 iu->tag = cpu_to_be16(cmdinfo->uas_tag);
517 iu->prio_attr = UAS_SIMPLE_TAG;
518 iu->len = len;
519 int_to_scsilun(sdev->lun, &iu->lun);
520 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
521
522 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
523 uas_cmd_cmplt, NULL);
524 urb->transfer_flags |= URB_FREE_BUFFER;
525 out:
526 return urb;
527 free:
528 usb_free_urb(urb);
529 return NULL;
530}
531
532/*
533 * Why should I request the Status IU before sending the Command IU? Spec
534 * says to, but also says the device may receive them in any order. Seems
535 * daft to me.
536 */
537
538static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
539{
540 struct uas_dev_info *devinfo = cmnd->device->hostdata;
541 struct urb *urb;
542 int err;
543
544 urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
545 if (!urb)
546 return NULL;
547 usb_anchor_urb(urb, &devinfo->sense_urbs);
548 err = usb_submit_urb(urb, gfp);
549 if (err) {
550 usb_unanchor_urb(urb);
551 uas_log_cmd_state(cmnd, "sense submit err", err);
552 usb_free_urb(urb);
553 return NULL;
554 }
555 return urb;
556}
557
558static int uas_submit_urbs(struct scsi_cmnd *cmnd,
559 struct uas_dev_info *devinfo)
560{
561 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
562 struct urb *urb;
563 int err;
564
565 lockdep_assert_held(&devinfo->lock);
566 if (cmdinfo->state & SUBMIT_STATUS_URB) {
567 urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
568 if (!urb)
569 return SCSI_MLQUEUE_DEVICE_BUSY;
570 cmdinfo->state &= ~SUBMIT_STATUS_URB;
571 }
572
573 if (cmdinfo->state & ALLOC_DATA_IN_URB) {
574 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
575 cmnd, DMA_FROM_DEVICE);
576 if (!cmdinfo->data_in_urb)
577 return SCSI_MLQUEUE_DEVICE_BUSY;
578 cmdinfo->state &= ~ALLOC_DATA_IN_URB;
579 }
580
581 if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
582 usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
583 err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
584 if (err) {
585 usb_unanchor_urb(cmdinfo->data_in_urb);
586 uas_log_cmd_state(cmnd, "data in submit err", err);
587 return SCSI_MLQUEUE_DEVICE_BUSY;
588 }
589 cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
590 cmdinfo->state |= DATA_IN_URB_INFLIGHT;
591 }
592
593 if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
594 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
595 cmnd, DMA_TO_DEVICE);
596 if (!cmdinfo->data_out_urb)
597 return SCSI_MLQUEUE_DEVICE_BUSY;
598 cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
599 }
600
601 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
602 usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
603 err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
604 if (err) {
605 usb_unanchor_urb(cmdinfo->data_out_urb);
606 uas_log_cmd_state(cmnd, "data out submit err", err);
607 return SCSI_MLQUEUE_DEVICE_BUSY;
608 }
609 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
610 cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
611 }
612
613 if (cmdinfo->state & ALLOC_CMD_URB) {
614 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
615 if (!cmdinfo->cmd_urb)
616 return SCSI_MLQUEUE_DEVICE_BUSY;
617 cmdinfo->state &= ~ALLOC_CMD_URB;
618 }
619
620 if (cmdinfo->state & SUBMIT_CMD_URB) {
621 usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
622 err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
623 if (err) {
624 usb_unanchor_urb(cmdinfo->cmd_urb);
625 uas_log_cmd_state(cmnd, "cmd submit err", err);
626 return SCSI_MLQUEUE_DEVICE_BUSY;
627 }
628 cmdinfo->cmd_urb = NULL;
629 cmdinfo->state &= ~SUBMIT_CMD_URB;
630 cmdinfo->state |= COMMAND_INFLIGHT;
631 }
632
633 return 0;
634}
635
636static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
637 void (*done)(struct scsi_cmnd *))
638{
639 struct scsi_device *sdev = cmnd->device;
640 struct uas_dev_info *devinfo = sdev->hostdata;
641 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
642 unsigned long flags;
643 int idx, err;
644
645 BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
646
647 /* Re-check scsi_block_requests now that we've the host-lock */
648 if (cmnd->device->host->host_self_blocked)
649 return SCSI_MLQUEUE_DEVICE_BUSY;
650
651 if ((devinfo->flags & US_FL_NO_ATA_1X) &&
652 (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
653 memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
654 sizeof(usb_stor_sense_invalidCDB));
655 cmnd->result = SAM_STAT_CHECK_CONDITION;
656 cmnd->scsi_done(cmnd);
657 return 0;
658 }
659
660 spin_lock_irqsave(&devinfo->lock, flags);
661
662 if (devinfo->resetting) {
663 cmnd->result = DID_ERROR << 16;
664 cmnd->scsi_done(cmnd);
665 goto zombie;
666 }
667
668 /* Find a free uas-tag */
669 for (idx = 0; idx < devinfo->qdepth; idx++) {
670 if (!devinfo->cmnd[idx])
671 break;
672 }
673 if (idx == devinfo->qdepth) {
674 spin_unlock_irqrestore(&devinfo->lock, flags);
675 return SCSI_MLQUEUE_DEVICE_BUSY;
676 }
677
678 cmnd->scsi_done = done;
679
680 memset(cmdinfo, 0, sizeof(*cmdinfo));
681 cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
682 cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
683
684 switch (cmnd->sc_data_direction) {
685 case DMA_FROM_DEVICE:
686 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
687 break;
688 case DMA_BIDIRECTIONAL:
689 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
690 fallthrough;
691 case DMA_TO_DEVICE:
692 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
693 case DMA_NONE:
694 break;
695 }
696
697 if (!devinfo->use_streams)
698 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
699
700 err = uas_submit_urbs(cmnd, devinfo);
701 /*
702 * in case of fatal errors the SCSI layer is peculiar
703 * a command that has finished is a success for the purpose
704 * of queueing, no matter how fatal the error
705 */
706 if (err == -ENODEV) {
707 cmnd->result = DID_ERROR << 16;
708 cmnd->scsi_done(cmnd);
709 goto zombie;
710 }
711 if (err) {
712 /* If we did nothing, give up now */
713 if (cmdinfo->state & SUBMIT_STATUS_URB) {
714 spin_unlock_irqrestore(&devinfo->lock, flags);
715 return SCSI_MLQUEUE_DEVICE_BUSY;
716 }
717 uas_add_work(cmdinfo);
718 }
719
720 devinfo->cmnd[idx] = cmnd;
721zombie:
722 spin_unlock_irqrestore(&devinfo->lock, flags);
723 return 0;
724}
725
726static DEF_SCSI_QCMD(uas_queuecommand)
727
728/*
729 * For now we do not support actually sending an abort to the device, so
730 * this eh always fails. Still we must define it to make sure that we've
731 * dropped all references to the cmnd in question once this function exits.
732 */
733static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
734{
735 struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
736 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
737 struct urb *data_in_urb = NULL;
738 struct urb *data_out_urb = NULL;
739 unsigned long flags;
740
741 spin_lock_irqsave(&devinfo->lock, flags);
742
743 uas_log_cmd_state(cmnd, __func__, 0);
744
745 /* Ensure that try_complete does not call scsi_done */
746 cmdinfo->state |= COMMAND_ABORTED;
747
748 /* Drop all refs to this cmnd, kill data urbs to break their ref */
749 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
750 if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
751 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
752 if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
753 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
754
755 uas_free_unsubmitted_urbs(cmnd);
756
757 spin_unlock_irqrestore(&devinfo->lock, flags);
758
759 if (data_in_urb) {
760 usb_kill_urb(data_in_urb);
761 usb_put_urb(data_in_urb);
762 }
763 if (data_out_urb) {
764 usb_kill_urb(data_out_urb);
765 usb_put_urb(data_out_urb);
766 }
767
768 return FAILED;
769}
770
771static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
772{
773 struct scsi_device *sdev = cmnd->device;
774 struct uas_dev_info *devinfo = sdev->hostdata;
775 struct usb_device *udev = devinfo->udev;
776 unsigned long flags;
777 int err;
778
779 err = usb_lock_device_for_reset(udev, devinfo->intf);
780 if (err) {
781 shost_printk(KERN_ERR, sdev->host,
782 "%s FAILED to get lock err %d\n", __func__, err);
783 return FAILED;
784 }
785
786 shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
787
788 spin_lock_irqsave(&devinfo->lock, flags);
789 devinfo->resetting = 1;
790 spin_unlock_irqrestore(&devinfo->lock, flags);
791
792 usb_kill_anchored_urbs(&devinfo->cmd_urbs);
793 usb_kill_anchored_urbs(&devinfo->sense_urbs);
794 usb_kill_anchored_urbs(&devinfo->data_urbs);
795 uas_zap_pending(devinfo, DID_RESET);
796
797 err = usb_reset_device(udev);
798
799 spin_lock_irqsave(&devinfo->lock, flags);
800 devinfo->resetting = 0;
801 spin_unlock_irqrestore(&devinfo->lock, flags);
802
803 usb_unlock_device(udev);
804
805 if (err) {
806 shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
807 __func__, err);
808 return FAILED;
809 }
810
811 shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
812 return SUCCESS;
813}
814
815static int uas_target_alloc(struct scsi_target *starget)
816{
817 struct uas_dev_info *devinfo = (struct uas_dev_info *)
818 dev_to_shost(starget->dev.parent)->hostdata;
819
820 if (devinfo->flags & US_FL_NO_REPORT_LUNS)
821 starget->no_report_luns = 1;
822
823 return 0;
824}
825
826static int uas_slave_alloc(struct scsi_device *sdev)
827{
828 struct uas_dev_info *devinfo =
829 (struct uas_dev_info *)sdev->host->hostdata;
830
831 sdev->hostdata = devinfo;
832
833 /*
834 * The protocol has no requirements on alignment in the strict sense.
835 * Controllers may or may not have alignment restrictions.
836 * As this is not exported, we use an extremely conservative guess.
837 */
838 blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
839
840 if (devinfo->flags & US_FL_MAX_SECTORS_64)
841 blk_queue_max_hw_sectors(sdev->request_queue, 64);
842 else if (devinfo->flags & US_FL_MAX_SECTORS_240)
843 blk_queue_max_hw_sectors(sdev->request_queue, 240);
844
845 return 0;
846}
847
848static int uas_slave_configure(struct scsi_device *sdev)
849{
850 struct uas_dev_info *devinfo = sdev->hostdata;
851
852 if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
853 sdev->no_report_opcodes = 1;
854
855 /* A few buggy USB-ATA bridges don't understand FUA */
856 if (devinfo->flags & US_FL_BROKEN_FUA)
857 sdev->broken_fua = 1;
858
859 /* UAS also needs to support FL_ALWAYS_SYNC */
860 if (devinfo->flags & US_FL_ALWAYS_SYNC) {
861 sdev->skip_ms_page_3f = 1;
862 sdev->skip_ms_page_8 = 1;
863 sdev->wce_default_on = 1;
864 }
865
866 /* Some disks cannot handle READ_CAPACITY_16 */
867 if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
868 sdev->no_read_capacity_16 = 1;
869
870 /*
871 * Some disks return the total number of blocks in response
872 * to READ CAPACITY rather than the highest block number.
873 * If this device makes that mistake, tell the sd driver.
874 */
875 if (devinfo->flags & US_FL_FIX_CAPACITY)
876 sdev->fix_capacity = 1;
877
878 /*
879 * in some cases we have to guess
880 */
881 if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
882 sdev->guess_capacity = 1;
883
884 /*
885 * Some devices don't like MODE SENSE with page=0x3f,
886 * which is the command used for checking if a device
887 * is write-protected. Now that we tell the sd driver
888 * to do a 192-byte transfer with this command the
889 * majority of devices work fine, but a few still can't
890 * handle it. The sd driver will simply assume those
891 * devices are write-enabled.
892 */
893 if (devinfo->flags & US_FL_NO_WP_DETECT)
894 sdev->skip_ms_page_3f = 1;
895
896 scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
897 return 0;
898}
899
900static struct scsi_host_template uas_host_template = {
901 .module = THIS_MODULE,
902 .name = "uas",
903 .queuecommand = uas_queuecommand,
904 .target_alloc = uas_target_alloc,
905 .slave_alloc = uas_slave_alloc,
906 .slave_configure = uas_slave_configure,
907 .eh_abort_handler = uas_eh_abort_handler,
908 .eh_device_reset_handler = uas_eh_device_reset_handler,
909 .this_id = -1,
910 .skip_settle_delay = 1,
911 .dma_boundary = PAGE_SIZE - 1,
912};
913
914#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
915 vendorName, productName, useProtocol, useTransport, \
916 initFunction, flags) \
917{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
918 .driver_info = (flags) }
919
920static struct usb_device_id uas_usb_ids[] = {
921# include "unusual_uas.h"
922 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
923 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
924 { }
925};
926MODULE_DEVICE_TABLE(usb, uas_usb_ids);
927
928#undef UNUSUAL_DEV
929
930static int uas_switch_interface(struct usb_device *udev,
931 struct usb_interface *intf)
932{
933 struct usb_host_interface *alt;
934
935 alt = uas_find_uas_alt_setting(intf);
936 if (!alt)
937 return -ENODEV;
938
939 return usb_set_interface(udev, alt->desc.bInterfaceNumber,
940 alt->desc.bAlternateSetting);
941}
942
943static int uas_configure_endpoints(struct uas_dev_info *devinfo)
944{
945 struct usb_host_endpoint *eps[4] = { };
946 struct usb_device *udev = devinfo->udev;
947 int r;
948
949 r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
950 if (r)
951 return r;
952
953 devinfo->cmd_pipe = usb_sndbulkpipe(udev,
954 usb_endpoint_num(&eps[0]->desc));
955 devinfo->status_pipe = usb_rcvbulkpipe(udev,
956 usb_endpoint_num(&eps[1]->desc));
957 devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
958 usb_endpoint_num(&eps[2]->desc));
959 devinfo->data_out_pipe = usb_sndbulkpipe(udev,
960 usb_endpoint_num(&eps[3]->desc));
961
962 if (udev->speed < USB_SPEED_SUPER) {
963 devinfo->qdepth = 32;
964 devinfo->use_streams = 0;
965 } else {
966 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
967 3, MAX_CMNDS, GFP_NOIO);
968 if (devinfo->qdepth < 0)
969 return devinfo->qdepth;
970 devinfo->use_streams = 1;
971 }
972
973 return 0;
974}
975
976static void uas_free_streams(struct uas_dev_info *devinfo)
977{
978 struct usb_device *udev = devinfo->udev;
979 struct usb_host_endpoint *eps[3];
980
981 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
982 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
983 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
984 usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
985}
986
987static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
988{
989 int result = -ENOMEM;
990 struct Scsi_Host *shost = NULL;
991 struct uas_dev_info *devinfo;
992 struct usb_device *udev = interface_to_usbdev(intf);
993 unsigned long dev_flags;
994
995 if (!uas_use_uas_driver(intf, id, &dev_flags))
996 return -ENODEV;
997
998 if (uas_switch_interface(udev, intf))
999 return -ENODEV;
1000
1001 shost = scsi_host_alloc(&uas_host_template,
1002 sizeof(struct uas_dev_info));
1003 if (!shost)
1004 goto set_alt0;
1005
1006 shost->max_cmd_len = 16 + 252;
1007 shost->max_id = 1;
1008 shost->max_lun = 256;
1009 shost->max_channel = 0;
1010 shost->sg_tablesize = udev->bus->sg_tablesize;
1011
1012 devinfo = (struct uas_dev_info *)shost->hostdata;
1013 devinfo->intf = intf;
1014 devinfo->udev = udev;
1015 devinfo->resetting = 0;
1016 devinfo->shutdown = 0;
1017 devinfo->flags = dev_flags;
1018 init_usb_anchor(&devinfo->cmd_urbs);
1019 init_usb_anchor(&devinfo->sense_urbs);
1020 init_usb_anchor(&devinfo->data_urbs);
1021 spin_lock_init(&devinfo->lock);
1022 INIT_WORK(&devinfo->work, uas_do_work);
1023 INIT_WORK(&devinfo->scan_work, uas_scan_work);
1024
1025 result = uas_configure_endpoints(devinfo);
1026 if (result)
1027 goto set_alt0;
1028
1029 /*
1030 * 1 tag is reserved for untagged commands +
1031 * 1 tag to avoid off by one errors in some bridge firmwares
1032 */
1033 shost->can_queue = devinfo->qdepth - 2;
1034
1035 usb_set_intfdata(intf, shost);
1036 result = scsi_add_host(shost, &intf->dev);
1037 if (result)
1038 goto free_streams;
1039
1040 /* Submit the delayed_work for SCSI-device scanning */
1041 schedule_work(&devinfo->scan_work);
1042
1043 return result;
1044
1045free_streams:
1046 uas_free_streams(devinfo);
1047 usb_set_intfdata(intf, NULL);
1048set_alt0:
1049 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1050 if (shost)
1051 scsi_host_put(shost);
1052 return result;
1053}
1054
1055static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1056{
1057 unsigned long flags;
1058 int i, r = 1;
1059
1060 spin_lock_irqsave(&devinfo->lock, flags);
1061
1062 for (i = 0; i < devinfo->qdepth; i++) {
1063 if (devinfo->cmnd[i]) {
1064 r = 0; /* Not empty */
1065 break;
1066 }
1067 }
1068
1069 spin_unlock_irqrestore(&devinfo->lock, flags);
1070
1071 return r;
1072}
1073
1074/*
1075 * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1076 * get empty while there still is more work to do due to sense-urbs completing
1077 * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1078 */
1079static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1080{
1081 unsigned long start_time;
1082 int r;
1083
1084 start_time = jiffies;
1085 do {
1086 flush_work(&devinfo->work);
1087
1088 r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1089 if (r == 0)
1090 return -ETIME;
1091
1092 r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1093 if (r == 0)
1094 return -ETIME;
1095
1096 if (time_after(jiffies, start_time + 5 * HZ))
1097 return -ETIME;
1098 } while (!uas_cmnd_list_empty(devinfo));
1099
1100 return 0;
1101}
1102
1103static int uas_pre_reset(struct usb_interface *intf)
1104{
1105 struct Scsi_Host *shost = usb_get_intfdata(intf);
1106 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1107 unsigned long flags;
1108
1109 if (devinfo->shutdown)
1110 return 0;
1111
1112 /* Block new requests */
1113 spin_lock_irqsave(shost->host_lock, flags);
1114 scsi_block_requests(shost);
1115 spin_unlock_irqrestore(shost->host_lock, flags);
1116
1117 if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1118 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1119 scsi_unblock_requests(shost);
1120 return 1;
1121 }
1122
1123 uas_free_streams(devinfo);
1124
1125 return 0;
1126}
1127
1128static int uas_post_reset(struct usb_interface *intf)
1129{
1130 struct Scsi_Host *shost = usb_get_intfdata(intf);
1131 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1132 unsigned long flags;
1133 int err;
1134
1135 if (devinfo->shutdown)
1136 return 0;
1137
1138 err = uas_configure_endpoints(devinfo);
1139 if (err && err != -ENODEV)
1140 shost_printk(KERN_ERR, shost,
1141 "%s: alloc streams error %d after reset",
1142 __func__, err);
1143
1144 /* we must unblock the host in every case lest we deadlock */
1145 spin_lock_irqsave(shost->host_lock, flags);
1146 scsi_report_bus_reset(shost, 0);
1147 spin_unlock_irqrestore(shost->host_lock, flags);
1148
1149 scsi_unblock_requests(shost);
1150
1151 return err ? 1 : 0;
1152}
1153
1154static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1155{
1156 struct Scsi_Host *shost = usb_get_intfdata(intf);
1157 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1158
1159 if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1160 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1161 return -ETIME;
1162 }
1163
1164 return 0;
1165}
1166
1167static int uas_resume(struct usb_interface *intf)
1168{
1169 return 0;
1170}
1171
1172static int uas_reset_resume(struct usb_interface *intf)
1173{
1174 struct Scsi_Host *shost = usb_get_intfdata(intf);
1175 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1176 unsigned long flags;
1177 int err;
1178
1179 err = uas_configure_endpoints(devinfo);
1180 if (err) {
1181 shost_printk(KERN_ERR, shost,
1182 "%s: alloc streams error %d after reset",
1183 __func__, err);
1184 return -EIO;
1185 }
1186
1187 spin_lock_irqsave(shost->host_lock, flags);
1188 scsi_report_bus_reset(shost, 0);
1189 spin_unlock_irqrestore(shost->host_lock, flags);
1190
1191 return 0;
1192}
1193
1194static void uas_disconnect(struct usb_interface *intf)
1195{
1196 struct Scsi_Host *shost = usb_get_intfdata(intf);
1197 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1198 unsigned long flags;
1199
1200 spin_lock_irqsave(&devinfo->lock, flags);
1201 devinfo->resetting = 1;
1202 spin_unlock_irqrestore(&devinfo->lock, flags);
1203
1204 cancel_work_sync(&devinfo->work);
1205 usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1206 usb_kill_anchored_urbs(&devinfo->sense_urbs);
1207 usb_kill_anchored_urbs(&devinfo->data_urbs);
1208 uas_zap_pending(devinfo, DID_NO_CONNECT);
1209
1210 /*
1211 * Prevent SCSI scanning (if it hasn't started yet)
1212 * or wait for the SCSI-scanning routine to stop.
1213 */
1214 cancel_work_sync(&devinfo->scan_work);
1215
1216 scsi_remove_host(shost);
1217 uas_free_streams(devinfo);
1218 scsi_host_put(shost);
1219}
1220
1221/*
1222 * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1223 * hang on reboot when the device is still in uas mode. Note the reset is
1224 * necessary as some devices won't revert to usb-storage mode without it.
1225 */
1226static void uas_shutdown(struct device *dev)
1227{
1228 struct usb_interface *intf = to_usb_interface(dev);
1229 struct usb_device *udev = interface_to_usbdev(intf);
1230 struct Scsi_Host *shost = usb_get_intfdata(intf);
1231 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1232
1233 if (system_state != SYSTEM_RESTART)
1234 return;
1235
1236 devinfo->shutdown = 1;
1237 uas_free_streams(devinfo);
1238 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1239 usb_reset_device(udev);
1240}
1241
1242static struct usb_driver uas_driver = {
1243 .name = "uas",
1244 .probe = uas_probe,
1245 .disconnect = uas_disconnect,
1246 .pre_reset = uas_pre_reset,
1247 .post_reset = uas_post_reset,
1248 .suspend = uas_suspend,
1249 .resume = uas_resume,
1250 .reset_resume = uas_reset_resume,
1251 .drvwrap.driver.shutdown = uas_shutdown,
1252 .id_table = uas_usb_ids,
1253};
1254
1255static int __init uas_init(void)
1256{
1257 int rv;
1258
1259 workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
1260 if (!workqueue)
1261 return -ENOMEM;
1262
1263 rv = usb_register(&uas_driver);
1264 if (rv) {
1265 destroy_workqueue(workqueue);
1266 return -ENOMEM;
1267 }
1268
1269 return 0;
1270}
1271
1272static void __exit uas_exit(void)
1273{
1274 usb_deregister(&uas_driver);
1275 destroy_workqueue(workqueue);
1276}
1277
1278module_init(uas_init);
1279module_exit(uas_exit);
1280
1281MODULE_LICENSE("GPL");
1282MODULE_IMPORT_NS(USB_STORAGE);
1283MODULE_AUTHOR(
1284 "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");