1/*
   2 * xHCI host controller driver
   3 *
   4 * Copyright (C) 2008 Intel Corp.
   5 *
   6 * Author: Sarah Sharp
   7 * Some code borrowed from the Linux EHCI driver.
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2 as
  11 * published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16 * for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software Foundation,
  20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 */
  22
  23#ifndef __LINUX_XHCI_HCD_H
  24#define __LINUX_XHCI_HCD_H
  25
  26#include <linux/usb.h>
  27#include <linux/timer.h>
  28#include <linux/kernel.h>
  29#include <linux/usb/hcd.h>
 
  30
  31/* Code sharing between pci-quirks and xhci hcd */
  32#include	"xhci-ext-caps.h"
  33#include "pci-quirks.h"
  34
  35/* xHCI PCI Configuration Registers */
  36#define XHCI_SBRN_OFFSET	(0x60)
  37
  38/* Max number of USB devices for any host controller - limit in section 6.1 */
  39#define MAX_HC_SLOTS		256
  40/* Section 5.3.3 - MaxPorts */
  41#define MAX_HC_PORTS		127
  42
  43/*
  44 * xHCI register interface.
  45 * This corresponds to the eXtensible Host Controller Interface (xHCI)
  46 * Revision 0.95 specification
  47 */
  48
  49/**
  50 * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
  51 * @hc_capbase:		length of the capabilities register and HC version number
  52 * @hcs_params1:	HCSPARAMS1 - Structural Parameters 1
  53 * @hcs_params2:	HCSPARAMS2 - Structural Parameters 2
  54 * @hcs_params3:	HCSPARAMS3 - Structural Parameters 3
  55 * @hcc_params:		HCCPARAMS - Capability Parameters
  56 * @db_off:		DBOFF - Doorbell array offset
  57 * @run_regs_off:	RTSOFF - Runtime register space offset
 
  58 */
  59struct xhci_cap_regs {
  60	__le32	hc_capbase;
  61	__le32	hcs_params1;
  62	__le32	hcs_params2;
  63	__le32	hcs_params3;
  64	__le32	hcc_params;
  65	__le32	db_off;
  66	__le32	run_regs_off;
 
  67	/* Reserved up to (CAPLENGTH - 0x1C) */
  68};
  69
  70/* hc_capbase bitmasks */
  71/* bits 7:0 - how long is the Capabilities register */
  72#define HC_LENGTH(p)		XHCI_HC_LENGTH(p)
  73/* bits 31:16	*/
  74#define HC_VERSION(p)		(((p) >> 16) & 0xffff)
  75
  76/* HCSPARAMS1 - hcs_params1 - bitmasks */
  77/* bits 0:7, Max Device Slots */
  78#define HCS_MAX_SLOTS(p)	(((p) >> 0) & 0xff)
  79#define HCS_SLOTS_MASK		0xff
  80/* bits 8:18, Max Interrupters */
  81#define HCS_MAX_INTRS(p)	(((p) >> 8) & 0x7ff)
  82/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
  83#define HCS_MAX_PORTS(p)	(((p) >> 24) & 0x7f)
  84
  85/* HCSPARAMS2 - hcs_params2 - bitmasks */
  86/* bits 0:3, frames or uframes that SW needs to queue transactions
  87 * ahead of the HW to meet periodic deadlines */
  88#define HCS_IST(p)		(((p) >> 0) & 0xf)
  89/* bits 4:7, max number of Event Ring segments */
  90#define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
 
  91/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
  92/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
  93#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
  94
  95/* HCSPARAMS3 - hcs_params3 - bitmasks */
  96/* bits 0:7, Max U1 to U0 latency for the roothub ports */
  97#define HCS_U1_LATENCY(p)	(((p) >> 0) & 0xff)
  98/* bits 16:31, Max U2 to U0 latency for the roothub ports */
  99#define HCS_U2_LATENCY(p)	(((p) >> 16) & 0xffff)
 100
 101/* HCCPARAMS - hcc_params - bitmasks */
 102/* true: HC can use 64-bit address pointers */
 103#define HCC_64BIT_ADDR(p)	((p) & (1 << 0))
 104/* true: HC can do bandwidth negotiation */
 105#define HCC_BANDWIDTH_NEG(p)	((p) & (1 << 1))
 106/* true: HC uses 64-byte Device Context structures
 107 * FIXME 64-byte context structures aren't supported yet.
 108 */
 109#define HCC_64BYTE_CONTEXT(p)	((p) & (1 << 2))
 110/* true: HC has port power switches */
 111#define HCC_PPC(p)		((p) & (1 << 3))
 112/* true: HC has port indicators */
 113#define HCS_INDICATOR(p)	((p) & (1 << 4))
 114/* true: HC has Light HC Reset Capability */
 115#define HCC_LIGHT_RESET(p)	((p) & (1 << 5))
 116/* true: HC supports latency tolerance messaging */
 117#define HCC_LTC(p)		((p) & (1 << 6))
 118/* true: no secondary Stream ID Support */
 119#define HCC_NSS(p)		((p) & (1 << 7))
 
 
 
 
 120/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
 121#define HCC_MAX_PSA(p)		(1 << ((((p) >> 12) & 0xf) + 1))
 122/* Extended Capabilities pointer from PCI base - section 5.3.6 */
 123#define HCC_EXT_CAPS(p)		XHCI_HCC_EXT_CAPS(p)
 124
 
 
 125/* db_off bitmask - bits 0:1 reserved */
 126#define	DBOFF_MASK	(~0x3)
 127
 128/* run_regs_off bitmask - bits 0:4 reserved */
 129#define	RTSOFF_MASK	(~0x1f)
 130
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 131
 132/* Number of registers per port */
 133#define	NUM_PORT_REGS	4
 134
 
 
 
 
 
 135/**
 136 * struct xhci_op_regs - xHCI Host Controller Operational Registers.
 137 * @command:		USBCMD - xHC command register
 138 * @status:		USBSTS - xHC status register
 139 * @page_size:		This indicates the page size that the host controller
 140 * 			supports.  If bit n is set, the HC supports a page size
 141 * 			of 2^(n+12), up to a 128MB page size.
 142 * 			4K is the minimum page size.
 143 * @cmd_ring:		CRP - 64-bit Command Ring Pointer
 144 * @dcbaa_ptr:		DCBAAP - 64-bit Device Context Base Address Array Pointer
 145 * @config_reg:		CONFIG - Configure Register
 146 * @port_status_base:	PORTSCn - base address for Port Status and Control
 147 * 			Each port has a Port Status and Control register,
 148 * 			followed by a Port Power Management Status and Control
 149 * 			register, a Port Link Info register, and a reserved
 150 * 			register.
 151 * @port_power_base:	PORTPMSCn - base address for
 152 * 			Port Power Management Status and Control
 153 * @port_link_base:	PORTLIn - base address for Port Link Info (current
 154 * 			Link PM state and control) for USB 2.1 and USB 3.0
 155 * 			devices.
 156 */
 157struct xhci_op_regs {
 158	__le32	command;
 159	__le32	status;
 160	__le32	page_size;
 161	__le32	reserved1;
 162	__le32	reserved2;
 163	__le32	dev_notification;
 164	__le64	cmd_ring;
 165	/* rsvd: offset 0x20-2F */
 166	__le32	reserved3[4];
 167	__le64	dcbaa_ptr;
 168	__le32	config_reg;
 169	/* rsvd: offset 0x3C-3FF */
 170	__le32	reserved4[241];
 171	/* port 1 registers, which serve as a base address for other ports */
 172	__le32	port_status_base;
 173	__le32	port_power_base;
 174	__le32	port_link_base;
 175	__le32	reserved5;
 176	/* registers for ports 2-255 */
 177	__le32	reserved6[NUM_PORT_REGS*254];
 178};
 179
 180/* USBCMD - USB command - command bitmasks */
 181/* start/stop HC execution - do not write unless HC is halted*/
 182#define CMD_RUN		XHCI_CMD_RUN
 183/* Reset HC - resets internal HC state machine and all registers (except
 184 * PCI config regs).  HC does NOT drive a USB reset on the downstream ports.
 185 * The xHCI driver must reinitialize the xHC after setting this bit.
 186 */
 187#define CMD_RESET	(1 << 1)
 188/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
 189#define CMD_EIE		XHCI_CMD_EIE
 190/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
 191#define CMD_HSEIE	XHCI_CMD_HSEIE
 192/* bits 4:6 are reserved (and should be preserved on writes). */
 193/* light reset (port status stays unchanged) - reset completed when this is 0 */
 194#define CMD_LRESET	(1 << 7)
 195/* host controller save/restore state. */
 196#define CMD_CSS		(1 << 8)
 197#define CMD_CRS		(1 << 9)
 198/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
 199#define CMD_EWE		XHCI_CMD_EWE
 200/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
 201 * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
 202 * '0' means the xHC can power it off if all ports are in the disconnect,
 203 * disabled, or powered-off state.
 204 */
 205#define CMD_PM_INDEX	(1 << 11)
 206/* bits 12:31 are reserved (and should be preserved on writes). */
 
 
 
 
 
 
 207
 208/* USBSTS - USB status - status bitmasks */
 209/* HC not running - set to 1 when run/stop bit is cleared. */
 210#define STS_HALT	XHCI_STS_HALT
 211/* serious error, e.g. PCI parity error.  The HC will clear the run/stop bit. */
 212#define STS_FATAL	(1 << 2)
 213/* event interrupt - clear this prior to clearing any IP flags in IR set*/
 214#define STS_EINT	(1 << 3)
 215/* port change detect */
 216#define STS_PORT	(1 << 4)
 217/* bits 5:7 reserved and zeroed */
 218/* save state status - '1' means xHC is saving state */
 219#define STS_SAVE	(1 << 8)
 220/* restore state status - '1' means xHC is restoring state */
 221#define STS_RESTORE	(1 << 9)
 222/* true: save or restore error */
 223#define STS_SRE		(1 << 10)
 224/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
 225#define STS_CNR		XHCI_STS_CNR
 226/* true: internal Host Controller Error - SW needs to reset and reinitialize */
 227#define STS_HCE		(1 << 12)
 228/* bits 13:31 reserved and should be preserved */
 229
 230/*
 231 * DNCTRL - Device Notification Control Register - dev_notification bitmasks
 232 * Generate a device notification event when the HC sees a transaction with a
 233 * notification type that matches a bit set in this bit field.
 234 */
 235#define	DEV_NOTE_MASK		(0xffff)
 236#define ENABLE_DEV_NOTE(x)	(1 << (x))
 237/* Most of the device notification types should only be used for debug.
 238 * SW does need to pay attention to function wake notifications.
 239 */
 240#define	DEV_NOTE_FWAKE		ENABLE_DEV_NOTE(1)
 241
 242/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
 243/* bit 0 is the command ring cycle state */
 244/* stop ring operation after completion of the currently executing command */
 245#define CMD_RING_PAUSE		(1 << 1)
 246/* stop ring immediately - abort the currently executing command */
 247#define CMD_RING_ABORT		(1 << 2)
 248/* true: command ring is running */
 249#define CMD_RING_RUNNING	(1 << 3)
 250/* bits 4:5 reserved and should be preserved */
 251/* Command Ring pointer - bit mask for the lower 32 bits. */
 252#define CMD_RING_RSVD_BITS	(0x3f)
 253
 254/* CONFIG - Configure Register - config_reg bitmasks */
 255/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
 256#define MAX_DEVS(p)	((p) & 0xff)
 257/* bits 8:31 - reserved and should be preserved */
 
 
 
 
 258
 259/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
 260/* true: device connected */
 261#define PORT_CONNECT	(1 << 0)
 262/* true: port enabled */
 263#define PORT_PE		(1 << 1)
 264/* bit 2 reserved and zeroed */
 265/* true: port has an over-current condition */
 266#define PORT_OC		(1 << 3)
 267/* true: port reset signaling asserted */
 268#define PORT_RESET	(1 << 4)
 269/* Port Link State - bits 5:8
 270 * A read gives the current link PM state of the port,
 271 * a write with Link State Write Strobe set sets the link state.
 272 */
 273#define PORT_PLS_MASK	(0xf << 5)
 274#define XDEV_U0		(0x0 << 5)
 
 
 275#define XDEV_U3		(0x3 << 5)
 
 
 
 
 
 
 
 
 276#define XDEV_RESUME	(0xf << 5)
 
 277/* true: port has power (see HCC_PPC) */
 278#define PORT_POWER	(1 << 9)
 279/* bits 10:13 indicate device speed:
 280 * 0 - undefined speed - port hasn't be initialized by a reset yet
 281 * 1 - full speed
 282 * 2 - low speed
 283 * 3 - high speed
 284 * 4 - super speed
 285 * 5-15 reserved
 286 */
 287#define DEV_SPEED_MASK		(0xf << 10)
 288#define	XDEV_FS			(0x1 << 10)
 289#define	XDEV_LS			(0x2 << 10)
 290#define	XDEV_HS			(0x3 << 10)
 291#define	XDEV_SS			(0x4 << 10)
 
 292#define DEV_UNDEFSPEED(p)	(((p) & DEV_SPEED_MASK) == (0x0<<10))
 293#define DEV_FULLSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_FS)
 294#define DEV_LOWSPEED(p)		(((p) & DEV_SPEED_MASK) == XDEV_LS)
 295#define DEV_HIGHSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_HS)
 296#define DEV_SUPERSPEED(p)	(((p) & DEV_SPEED_MASK) == XDEV_SS)
 
 
 
 
 297/* Bits 20:23 in the Slot Context are the speed for the device */
 298#define	SLOT_SPEED_FS		(XDEV_FS << 10)
 299#define	SLOT_SPEED_LS		(XDEV_LS << 10)
 300#define	SLOT_SPEED_HS		(XDEV_HS << 10)
 301#define	SLOT_SPEED_SS		(XDEV_SS << 10)
 
 302/* Port Indicator Control */
 303#define PORT_LED_OFF	(0 << 14)
 304#define PORT_LED_AMBER	(1 << 14)
 305#define PORT_LED_GREEN	(2 << 14)
 306#define PORT_LED_MASK	(3 << 14)
 307/* Port Link State Write Strobe - set this when changing link state */
 308#define PORT_LINK_STROBE	(1 << 16)
 309/* true: connect status change */
 310#define PORT_CSC	(1 << 17)
 311/* true: port enable change */
 312#define PORT_PEC	(1 << 18)
 313/* true: warm reset for a USB 3.0 device is done.  A "hot" reset puts the port
 314 * into an enabled state, and the device into the default state.  A "warm" reset
 315 * also resets the link, forcing the device through the link training sequence.
 316 * SW can also look at the Port Reset register to see when warm reset is done.
 317 */
 318#define PORT_WRC	(1 << 19)
 319/* true: over-current change */
 320#define PORT_OCC	(1 << 20)
 321/* true: reset change - 1 to 0 transition of PORT_RESET */
 322#define PORT_RC		(1 << 21)
 323/* port link status change - set on some port link state transitions:
 324 *  Transition				Reason
 325 *  ------------------------------------------------------------------------------
 326 *  - U3 to Resume			Wakeup signaling from a device
 327 *  - Resume to Recovery to U0		USB 3.0 device resume
 328 *  - Resume to U0			USB 2.0 device resume
 329 *  - U3 to Recovery to U0		Software resume of USB 3.0 device complete
 330 *  - U3 to U0				Software resume of USB 2.0 device complete
 331 *  - U2 to U0				L1 resume of USB 2.1 device complete
 332 *  - U0 to U0 (???)			L1 entry rejection by USB 2.1 device
 333 *  - U0 to disabled			L1 entry error with USB 2.1 device
 334 *  - Any state to inactive		Error on USB 3.0 port
 335 */
 336#define PORT_PLC	(1 << 22)
 337/* port configure error change - port failed to configure its link partner */
 338#define PORT_CEC	(1 << 23)
 339/* bit 24 reserved */
 
 
 
 
 
 
 
 
 340/* wake on connect (enable) */
 341#define PORT_WKCONN_E	(1 << 25)
 342/* wake on disconnect (enable) */
 343#define PORT_WKDISC_E	(1 << 26)
 344/* wake on over-current (enable) */
 345#define PORT_WKOC_E	(1 << 27)
 346/* bits 28:29 reserved */
 347/* true: device is removable - for USB 3.0 roothub emulation */
 348#define PORT_DEV_REMOVE	(1 << 30)
 349/* Initiate a warm port reset - complete when PORT_WRC is '1' */
 350#define PORT_WR		(1 << 31)
 351
 352/* We mark duplicate entries with -1 */
 353#define DUPLICATE_ENTRY ((u8)(-1))
 354
 355/* Port Power Management Status and Control - port_power_base bitmasks */
 356/* Inactivity timer value for transitions into U1, in microseconds.
 357 * Timeout can be up to 127us.  0xFF means an infinite timeout.
 358 */
 359#define PORT_U1_TIMEOUT(p)	((p) & 0xff)
 
 360/* Inactivity timer value for transitions into U2 */
 361#define PORT_U2_TIMEOUT(p)	(((p) & 0xff) << 8)
 
 362/* Bits 24:31 for port testing */
 363
 364/* USB2 Protocol PORTSPMSC */
 365#define PORT_RWE	(1 << 0x3)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 366
 367/**
 368 * struct xhci_intr_reg - Interrupt Register Set
 369 * @irq_pending:	IMAN - Interrupt Management Register.  Used to enable
 370 *			interrupts and check for pending interrupts.
 371 * @irq_control:	IMOD - Interrupt Moderation Register.
 372 * 			Used to throttle interrupts.
 373 * @erst_size:		Number of segments in the Event Ring Segment Table (ERST).
 374 * @erst_base:		ERST base address.
 375 * @erst_dequeue:	Event ring dequeue pointer.
 376 *
 377 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
 378 * Ring Segment Table (ERST) associated with it.  The event ring is comprised of
 379 * multiple segments of the same size.  The HC places events on the ring and
 380 * "updates the Cycle bit in the TRBs to indicate to software the current
 381 * position of the Enqueue Pointer." The HCD (Linux) processes those events and
 382 * updates the dequeue pointer.
 383 */
 384struct xhci_intr_reg {
 385	__le32	irq_pending;
 386	__le32	irq_control;
 387	__le32	erst_size;
 388	__le32	rsvd;
 389	__le64	erst_base;
 390	__le64	erst_dequeue;
 391};
 392
 393/* irq_pending bitmasks */
 394#define	ER_IRQ_PENDING(p)	((p) & 0x1)
 395/* bits 2:31 need to be preserved */
 396/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
 397#define	ER_IRQ_CLEAR(p)		((p) & 0xfffffffe)
 398#define	ER_IRQ_ENABLE(p)	((ER_IRQ_CLEAR(p)) | 0x2)
 399#define	ER_IRQ_DISABLE(p)	((ER_IRQ_CLEAR(p)) & ~(0x2))
 400
 401/* irq_control bitmasks */
 402/* Minimum interval between interrupts (in 250ns intervals).  The interval
 403 * between interrupts will be longer if there are no events on the event ring.
 404 * Default is 4000 (1 ms).
 405 */
 406#define ER_IRQ_INTERVAL_MASK	(0xffff)
 407/* Counter used to count down the time to the next interrupt - HW use only */
 408#define ER_IRQ_COUNTER_MASK	(0xffff << 16)
 409
 410/* erst_size bitmasks */
 411/* Preserve bits 16:31 of erst_size */
 412#define	ERST_SIZE_MASK		(0xffff << 16)
 413
 414/* erst_dequeue bitmasks */
 415/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
 416 * where the current dequeue pointer lies.  This is an optional HW hint.
 417 */
 418#define ERST_DESI_MASK		(0x7)
 419/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
 420 * a work queue (or delayed service routine)?
 421 */
 422#define ERST_EHB		(1 << 3)
 423#define ERST_PTR_MASK		(0xf)
 424
 425/**
 426 * struct xhci_run_regs
 427 * @microframe_index:
 428 * 		MFINDEX - current microframe number
 429 *
 430 * Section 5.5 Host Controller Runtime Registers:
 431 * "Software should read and write these registers using only Dword (32 bit)
 432 * or larger accesses"
 433 */
 434struct xhci_run_regs {
 435	__le32			microframe_index;
 436	__le32			rsvd[7];
 437	struct xhci_intr_reg	ir_set[128];
 438};
 439
 440/**
 441 * struct doorbell_array
 442 *
 443 * Bits  0 -  7: Endpoint target
 444 * Bits  8 - 15: RsvdZ
 445 * Bits 16 - 31: Stream ID
 446 *
 447 * Section 5.6
 448 */
 449struct xhci_doorbell_array {
 450	__le32	doorbell[256];
 451};
 452
 453#define DB_VALUE(ep, stream)	((((ep) + 1) & 0xff) | ((stream) << 16))
 454#define DB_VALUE_HOST		0x00000000
 455
 456/**
 457 * struct xhci_protocol_caps
 458 * @revision:		major revision, minor revision, capability ID,
 459 *			and next capability pointer.
 460 * @name_string:	Four ASCII characters to say which spec this xHC
 461 *			follows, typically "USB ".
 462 * @port_info:		Port offset, count, and protocol-defined information.
 463 */
 464struct xhci_protocol_caps {
 465	u32	revision;
 466	u32	name_string;
 467	u32	port_info;
 468};
 469
 470#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
 
 
 471#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
 472#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
 473
 
 
 
 
 
 
 
 
 
 
 
 
 474/**
 475 * struct xhci_container_ctx
 476 * @type: Type of context.  Used to calculated offsets to contained contexts.
 477 * @size: Size of the context data
 478 * @bytes: The raw context data given to HW
 479 * @dma: dma address of the bytes
 480 *
 481 * Represents either a Device or Input context.  Holds a pointer to the raw
 482 * memory used for the context (bytes) and dma address of it (dma).
 483 */
 484struct xhci_container_ctx {
 485	unsigned type;
 486#define XHCI_CTX_TYPE_DEVICE  0x1
 487#define XHCI_CTX_TYPE_INPUT   0x2
 488
 489	int size;
 490
 491	u8 *bytes;
 492	dma_addr_t dma;
 493};
 494
 495/**
 496 * struct xhci_slot_ctx
 497 * @dev_info:	Route string, device speed, hub info, and last valid endpoint
 498 * @dev_info2:	Max exit latency for device number, root hub port number
 499 * @tt_info:	tt_info is used to construct split transaction tokens
 500 * @dev_state:	slot state and device address
 501 *
 502 * Slot Context - section 6.2.1.1.  This assumes the HC uses 32-byte context
 503 * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
 504 * reserved at the end of the slot context for HC internal use.
 505 */
 506struct xhci_slot_ctx {
 507	__le32	dev_info;
 508	__le32	dev_info2;
 509	__le32	tt_info;
 510	__le32	dev_state;
 511	/* offset 0x10 to 0x1f reserved for HC internal use */
 512	__le32	reserved[4];
 513};
 514
 515/* dev_info bitmasks */
 516/* Route String - 0:19 */
 517#define ROUTE_STRING_MASK	(0xfffff)
 518/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
 519#define DEV_SPEED	(0xf << 20)
 
 520/* bit 24 reserved */
 521/* Is this LS/FS device connected through a HS hub? - bit 25 */
 522#define DEV_MTT		(0x1 << 25)
 523/* Set if the device is a hub - bit 26 */
 524#define DEV_HUB		(0x1 << 26)
 525/* Index of the last valid endpoint context in this device context - 27:31 */
 526#define LAST_CTX_MASK	(0x1f << 27)
 527#define LAST_CTX(p)	((p) << 27)
 528#define LAST_CTX_TO_EP_NUM(p)	(((p) >> 27) - 1)
 529#define SLOT_FLAG	(1 << 0)
 530#define EP0_FLAG	(1 << 1)
 531
 532/* dev_info2 bitmasks */
 533/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
 534#define MAX_EXIT	(0xffff)
 535/* Root hub port number that is needed to access the USB device */
 536#define ROOT_HUB_PORT(p)	(((p) & 0xff) << 16)
 537#define DEVINFO_TO_ROOT_HUB_PORT(p)	(((p) >> 16) & 0xff)
 538/* Maximum number of ports under a hub device */
 539#define XHCI_MAX_PORTS(p)	(((p) & 0xff) << 24)
 
 540
 541/* tt_info bitmasks */
 542/*
 543 * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
 544 * The Slot ID of the hub that isolates the high speed signaling from
 545 * this low or full-speed device.  '0' if attached to root hub port.
 546 */
 547#define TT_SLOT		(0xff)
 548/*
 549 * The number of the downstream facing port of the high-speed hub
 550 * '0' if the device is not low or full speed.
 551 */
 552#define TT_PORT		(0xff << 8)
 553#define TT_THINK_TIME(p)	(((p) & 0x3) << 16)
 
 554
 555/* dev_state bitmasks */
 556/* USB device address - assigned by the HC */
 557#define DEV_ADDR_MASK	(0xff)
 558/* bits 8:26 reserved */
 559/* Slot state */
 560#define SLOT_STATE	(0x1f << 27)
 561#define GET_SLOT_STATE(p)	(((p) & (0x1f << 27)) >> 27)
 562
 563#define SLOT_STATE_DISABLED	0
 564#define SLOT_STATE_ENABLED	SLOT_STATE_DISABLED
 565#define SLOT_STATE_DEFAULT	1
 566#define SLOT_STATE_ADDRESSED	2
 567#define SLOT_STATE_CONFIGURED	3
 568
 569/**
 570 * struct xhci_ep_ctx
 571 * @ep_info:	endpoint state, streams, mult, and interval information.
 572 * @ep_info2:	information on endpoint type, max packet size, max burst size,
 573 * 		error count, and whether the HC will force an event for all
 574 * 		transactions.
 575 * @deq:	64-bit ring dequeue pointer address.  If the endpoint only
 576 * 		defines one stream, this points to the endpoint transfer ring.
 577 * 		Otherwise, it points to a stream context array, which has a
 578 * 		ring pointer for each flow.
 579 * @tx_info:
 580 * 		Average TRB lengths for the endpoint ring and
 581 * 		max payload within an Endpoint Service Interval Time (ESIT).
 582 *
 583 * Endpoint Context - section 6.2.1.2.  This assumes the HC uses 32-byte context
 584 * structures.  If the HC uses 64-byte contexts, there is an additional 32 bytes
 585 * reserved at the end of the endpoint context for HC internal use.
 586 */
 587struct xhci_ep_ctx {
 588	__le32	ep_info;
 589	__le32	ep_info2;
 590	__le64	deq;
 591	__le32	tx_info;
 592	/* offset 0x14 - 0x1f reserved for HC internal use */
 593	__le32	reserved[3];
 594};
 595
 596/* ep_info bitmasks */
 597/*
 598 * Endpoint State - bits 0:2
 599 * 0 - disabled
 600 * 1 - running
 601 * 2 - halted due to halt condition - ok to manipulate endpoint ring
 602 * 3 - stopped
 603 * 4 - TRB error
 604 * 5-7 - reserved
 605 */
 606#define EP_STATE_MASK		(0xf)
 607#define EP_STATE_DISABLED	0
 608#define EP_STATE_RUNNING	1
 609#define EP_STATE_HALTED		2
 610#define EP_STATE_STOPPED	3
 611#define EP_STATE_ERROR		4
 
 
 612/* Mult - Max number of burtst within an interval, in EP companion desc. */
 613#define EP_MULT(p)		(((p) & 0x3) << 8)
 
 614/* bits 10:14 are Max Primary Streams */
 615/* bit 15 is Linear Stream Array */
 616/* Interval - period between requests to an endpoint - 125u increments. */
 617#define EP_INTERVAL(p)		(((p) & 0xff) << 16)
 618#define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 619#define EP_MAXPSTREAMS_MASK	(0x1f << 10)
 620#define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
 
 
 621/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
 622#define	EP_HAS_LSA		(1 << 15)
 
 
 623
 624/* ep_info2 bitmasks */
 625/*
 626 * Force Event - generate transfer events for all TRBs for this endpoint
 627 * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
 628 */
 629#define	FORCE_EVENT	(0x1)
 630#define ERROR_COUNT(p)	(((p) & 0x3) << 1)
 631#define CTX_TO_EP_TYPE(p)	(((p) >> 3) & 0x7)
 632#define EP_TYPE(p)	((p) << 3)
 633#define ISOC_OUT_EP	1
 634#define BULK_OUT_EP	2
 635#define INT_OUT_EP	3
 636#define CTRL_EP		4
 637#define ISOC_IN_EP	5
 638#define BULK_IN_EP	6
 639#define INT_IN_EP	7
 640/* bit 6 reserved */
 641/* bit 7 is Host Initiate Disable - for disabling stream selection */
 642#define MAX_BURST(p)	(((p)&0xff) << 8)
 
 643#define MAX_PACKET(p)	(((p)&0xffff) << 16)
 644#define MAX_PACKET_MASK		(0xffff << 16)
 645#define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 646
 647/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
 648 * USB2.0 spec 9.6.6.
 649 */
 650#define GET_MAX_PACKET(p)	((p) & 0x7ff)
 651
 652/* tx_info bitmasks */
 653#define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 654#define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
 
 
 655
 656/* deq bitmasks */
 657#define EP_CTX_CYCLE_MASK		(1 << 0)
 
 658
 659
 660/**
 661 * struct xhci_input_control_context
 662 * Input control context; see section 6.2.5.
 663 *
 664 * @drop_context:	set the bit of the endpoint context you want to disable
 665 * @add_context:	set the bit of the endpoint context you want to enable
 666 */
 667struct xhci_input_control_ctx {
 668	__le32	drop_flags;
 669	__le32	add_flags;
 670	__le32	rsvd2[6];
 671};
 672
 
 
 
 
 
 673/* Represents everything that is needed to issue a command on the command ring.
 674 * It's useful to pre-allocate these for commands that cannot fail due to
 675 * out-of-memory errors, like freeing streams.
 676 */
 677struct xhci_command {
 678	/* Input context for changing device state */
 679	struct xhci_container_ctx	*in_ctx;
 680	u32				status;
 
 681	/* If completion is null, no one is waiting on this command
 682	 * and the structure can be freed after the command completes.
 683	 */
 684	struct completion		*completion;
 685	union xhci_trb			*command_trb;
 686	struct list_head		cmd_list;
 687};
 688
 689/* drop context bitmasks */
 690#define	DROP_EP(x)	(0x1 << x)
 691/* add context bitmasks */
 692#define	ADD_EP(x)	(0x1 << x)
 693
 694struct xhci_stream_ctx {
 695	/* 64-bit stream ring address, cycle state, and stream type */
 696	__le64	stream_ring;
 697	/* offset 0x14 - 0x1f reserved for HC internal use */
 698	__le32	reserved[2];
 699};
 700
 701/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
 702#define	SCT_FOR_CTX(p)		(((p) << 1) & 0x7)
 703/* Secondary stream array type, dequeue pointer is to a transfer ring */
 704#define	SCT_SEC_TR		0
 705/* Primary stream array type, dequeue pointer is to a transfer ring */
 706#define	SCT_PRI_TR		1
 707/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
 708#define SCT_SSA_8		2
 709#define SCT_SSA_16		3
 710#define SCT_SSA_32		4
 711#define SCT_SSA_64		5
 712#define SCT_SSA_128		6
 713#define SCT_SSA_256		7
 714
 715/* Assume no secondary streams for now */
 716struct xhci_stream_info {
 717	struct xhci_ring		**stream_rings;
 718	/* Number of streams, including stream 0 (which drivers can't use) */
 719	unsigned int			num_streams;
 720	/* The stream context array may be bigger than
 721	 * the number of streams the driver asked for
 722	 */
 723	struct xhci_stream_ctx		*stream_ctx_array;
 724	unsigned int			num_stream_ctxs;
 725	dma_addr_t			ctx_array_dma;
 726	/* For mapping physical TRB addresses to segments in stream rings */
 727	struct radix_tree_root		trb_address_map;
 728	struct xhci_command		*free_streams_command;
 729};
 730
 731#define	SMALL_STREAM_ARRAY_SIZE		256
 732#define	MEDIUM_STREAM_ARRAY_SIZE	1024
 733
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 734struct xhci_virt_ep {
 735	struct xhci_ring		*ring;
 736	/* Related to endpoints that are configured to use stream IDs only */
 737	struct xhci_stream_info		*stream_info;
 738	/* Temporary storage in case the configure endpoint command fails and we
 739	 * have to restore the device state to the previous state
 740	 */
 741	struct xhci_ring		*new_ring;
 742	unsigned int			ep_state;
 743#define SET_DEQ_PENDING		(1 << 0)
 744#define EP_HALTED		(1 << 1)	/* For stall handling */
 745#define EP_HALT_PENDING		(1 << 2)	/* For URB cancellation */
 746/* Transitioning the endpoint to using streams, don't enqueue URBs */
 747#define EP_GETTING_STREAMS	(1 << 3)
 748#define EP_HAS_STREAMS		(1 << 4)
 749/* Transitioning the endpoint to not using streams, don't enqueue URBs */
 750#define EP_GETTING_NO_STREAMS	(1 << 5)
 
 
 
 
 751	/* ----  Related to URB cancellation ---- */
 752	struct list_head	cancelled_td_list;
 753	/* The TRB that was last reported in a stopped endpoint ring */
 754	union xhci_trb		*stopped_trb;
 755	struct xhci_td		*stopped_td;
 756	unsigned int		stopped_stream;
 757	/* Watchdog timer for stop endpoint command to cancel URBs */
 758	struct timer_list	stop_cmd_timer;
 759	int			stop_cmds_pending;
 760	struct xhci_hcd		*xhci;
 761	/* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
 762	 * command.  We'll need to update the ring's dequeue segment and dequeue
 763	 * pointer after the command completes.
 764	 */
 765	struct xhci_segment	*queued_deq_seg;
 766	union xhci_trb		*queued_deq_ptr;
 767	/*
 768	 * Sometimes the xHC can not process isochronous endpoint ring quickly
 769	 * enough, and it will miss some isoc tds on the ring and generate
 770	 * a Missed Service Error Event.
 771	 * Set skip flag when receive a Missed Service Error Event and
 772	 * process the missed tds on the endpoint ring.
 773	 */
 774	bool			skip;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 775};
 776
 
 777struct xhci_virt_device {
 778	struct usb_device		*udev;
 779	/*
 780	 * Commands to the hardware are passed an "input context" that
 781	 * tells the hardware what to change in its data structures.
 782	 * The hardware will return changes in an "output context" that
 783	 * software must allocate for the hardware.  We need to keep
 784	 * track of input and output contexts separately because
 785	 * these commands might fail and we don't trust the hardware.
 786	 */
 787	struct xhci_container_ctx       *out_ctx;
 788	/* Used for addressing devices and configuration changes */
 789	struct xhci_container_ctx       *in_ctx;
 790	/* Rings saved to ensure old alt settings can be re-instated */
 791	struct xhci_ring		**ring_cache;
 792	int				num_rings_cached;
 793	/* Store xHC assigned device address */
 794	int				address;
 795#define	XHCI_MAX_RINGS_CACHED	31
 796	struct xhci_virt_ep		eps[31];
 797	struct completion		cmd_completion;
 798	/* Status of the last command issued for this device */
 799	u32				cmd_status;
 800	struct list_head		cmd_list;
 801	u8				port;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 802};
 803
 804
 805/**
 806 * struct xhci_device_context_array
 807 * @dev_context_ptr	array of 64-bit DMA addresses for device contexts
 808 */
 809struct xhci_device_context_array {
 810	/* 64-bit device addresses; we only write 32-bit addresses */
 811	__le64			dev_context_ptrs[MAX_HC_SLOTS];
 812	/* private xHCD pointers */
 813	dma_addr_t	dma;
 814};
 815/* TODO: write function to set the 64-bit device DMA address */
 816/*
 817 * TODO: change this to be dynamically sized at HC mem init time since the HC
 818 * might not be able to handle the maximum number of devices possible.
 819 */
 820
 821
 822struct xhci_transfer_event {
 823	/* 64-bit buffer address, or immediate data */
 824	__le64	buffer;
 825	__le32	transfer_len;
 826	/* This field is interpreted differently based on the type of TRB */
 827	__le32	flags;
 828};
 829
 
 
 
 
 830/** Transfer Event bit fields **/
 831#define	TRB_TO_EP_ID(p)	(((p) >> 16) & 0x1f)
 832
 833/* Completion Code - only applicable for some types of TRBs */
 834#define	COMP_CODE_MASK		(0xff << 24)
 835#define GET_COMP_CODE(p)	(((p) & COMP_CODE_MASK) >> 24)
 836#define COMP_SUCCESS	1
 837/* Data Buffer Error */
 838#define COMP_DB_ERR	2
 839/* Babble Detected Error */
 840#define COMP_BABBLE	3
 841/* USB Transaction Error */
 842#define COMP_TX_ERR	4
 843/* TRB Error - some TRB field is invalid */
 844#define COMP_TRB_ERR	5
 845/* Stall Error - USB device is stalled */
 846#define COMP_STALL	6
 847/* Resource Error - HC doesn't have memory for that device configuration */
 848#define COMP_ENOMEM	7
 849/* Bandwidth Error - not enough room in schedule for this dev config */
 850#define COMP_BW_ERR	8
 851/* No Slots Available Error - HC ran out of device slots */
 852#define COMP_ENOSLOTS	9
 853/* Invalid Stream Type Error */
 854#define COMP_STREAM_ERR	10
 855/* Slot Not Enabled Error - doorbell rung for disabled device slot */
 856#define COMP_EBADSLT	11
 857/* Endpoint Not Enabled Error */
 858#define COMP_EBADEP	12
 859/* Short Packet */
 860#define COMP_SHORT_TX	13
 861/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
 862#define COMP_UNDERRUN	14
 863/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
 864#define COMP_OVERRUN	15
 865/* Virtual Function Event Ring Full Error */
 866#define COMP_VF_FULL	16
 867/* Parameter Error - Context parameter is invalid */
 868#define COMP_EINVAL	17
 869/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
 870#define COMP_BW_OVER	18
 871/* Context State Error - illegal context state transition requested */
 872#define COMP_CTX_STATE	19
 873/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
 874#define COMP_PING_ERR	20
 875/* Event Ring is full */
 876#define COMP_ER_FULL	21
 877/* Incompatible Device Error */
 878#define COMP_DEV_ERR	22
 879/* Missed Service Error - HC couldn't service an isoc ep within interval */
 880#define COMP_MISSED_INT	23
 881/* Successfully stopped command ring */
 882#define COMP_CMD_STOP	24
 883/* Successfully aborted current command and stopped command ring */
 884#define COMP_CMD_ABORT	25
 885/* Stopped - transfer was terminated by a stop endpoint command */
 886#define COMP_STOP	26
 887/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
 888#define COMP_STOP_INVAL	27
 889/* Control Abort Error - Debug Capability - control pipe aborted */
 890#define COMP_DBG_ABORT	28
 891/* Max Exit Latency Too Large Error */
 892#define COMP_MEL_ERR	29
 893/* TRB type 30 reserved */
 894/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
 895#define COMP_BUFF_OVER	31
 896/* Event Lost Error - xHC has an "internal event overrun condition" */
 897#define COMP_ISSUES	32
 898/* Undefined Error - reported when other error codes don't apply */
 899#define COMP_UNKNOWN	33
 900/* Invalid Stream ID Error */
 901#define COMP_STRID_ERR	34
 902/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
 903/* FIXME - check for this */
 904#define COMP_2ND_BW_ERR	35
 905/* Split Transaction Error */
 906#define	COMP_SPLIT_ERR	36
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 907
 908struct xhci_link_trb {
 909	/* 64-bit segment pointer*/
 910	__le64 segment_ptr;
 911	__le32 intr_target;
 912	__le32 control;
 913};
 914
 915/* control bitfields */
 916#define LINK_TOGGLE	(0x1<<1)
 917
 918/* Command completion event TRB */
 919struct xhci_event_cmd {
 920	/* Pointer to command TRB, or the value passed by the event data trb */
 921	__le64 cmd_trb;
 922	__le32 status;
 923	__le32 flags;
 924};
 925
 926/* flags bitmasks */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 927/* bits 16:23 are the virtual function ID */
 928/* bits 24:31 are the slot ID */
 929#define TRB_TO_SLOT_ID(p)	(((p) & (0xff<<24)) >> 24)
 930#define SLOT_ID_FOR_TRB(p)	(((p) & 0xff) << 24)
 931
 932/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
 933#define TRB_TO_EP_INDEX(p)		((((p) & (0x1f << 16)) >> 16) - 1)
 934#define	EP_ID_FOR_TRB(p)		((((p) + 1) & 0x1f) << 16)
 935
 936#define SUSPEND_PORT_FOR_TRB(p)		(((p) & 1) << 23)
 937#define TRB_TO_SUSPEND_PORT(p)		(((p) & (1 << 23)) >> 23)
 938#define LAST_EP_INDEX			30
 939
 940/* Set TR Dequeue Pointer command TRB fields */
 941#define TRB_TO_STREAM_ID(p)		((((p) & (0xffff << 16)) >> 16))
 942#define STREAM_ID_FOR_TRB(p)		((((p)) & 0xffff) << 16)
 
 943
 
 
 944
 945/* Port Status Change Event TRB fields */
 946/* Port ID - bits 31:24 */
 947#define GET_PORT_ID(p)		(((p) & (0xff << 24)) >> 24)
 948
 
 
 949/* Normal TRB fields */
 950/* transfer_len bitmasks - bits 0:16 */
 951#define	TRB_LEN(p)		((p) & 0x1ffff)
 
 
 
 
 
 952/* Interrupter Target - which MSI-X vector to target the completion event at */
 953#define TRB_INTR_TARGET(p)	(((p) & 0x3ff) << 22)
 954#define GET_INTR_TARGET(p)	(((p) >> 22) & 0x3ff)
 
 955#define TRB_TBC(p)		(((p) & 0x3) << 7)
 956#define TRB_TLBPC(p)		(((p) & 0xf) << 16)
 957
 958/* Cycle bit - indicates TRB ownership by HC or HCD */
 959#define TRB_CYCLE		(1<<0)
 960/*
 961 * Force next event data TRB to be evaluated before task switch.
 962 * Used to pass OS data back after a TD completes.
 963 */
 964#define TRB_ENT			(1<<1)
 965/* Interrupt on short packet */
 966#define TRB_ISP			(1<<2)
 967/* Set PCIe no snoop attribute */
 968#define TRB_NO_SNOOP		(1<<3)
 969/* Chain multiple TRBs into a TD */
 970#define TRB_CHAIN		(1<<4)
 971/* Interrupt on completion */
 972#define TRB_IOC			(1<<5)
 973/* The buffer pointer contains immediate data */
 974#define TRB_IDT			(1<<6)
 
 
 975
 976/* Block Event Interrupt */
 977#define	TRB_BEI			(1<<9)
 978
 979/* Control transfer TRB specific fields */
 980#define TRB_DIR_IN		(1<<16)
 981#define	TRB_TX_TYPE(p)		((p) << 16)
 982#define	TRB_DATA_OUT		2
 983#define	TRB_DATA_IN		3
 984
 985/* Isochronous TRB specific fields */
 986#define TRB_SIA			(1<<31)
 
 987
 988struct xhci_generic_trb {
 989	__le32 field[4];
 990};
 991
 992union xhci_trb {
 993	struct xhci_link_trb		link;
 994	struct xhci_transfer_event	trans_event;
 995	struct xhci_event_cmd		event_cmd;
 996	struct xhci_generic_trb		generic;
 997};
 998
 999/* TRB bit mask */
1000#define	TRB_TYPE_BITMASK	(0xfc00)
1001#define TRB_TYPE(p)		((p) << 10)
1002#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
1003/* TRB type IDs */
1004/* bulk, interrupt, isoc scatter/gather, and control data stage */
1005#define TRB_NORMAL		1
1006/* setup stage for control transfers */
1007#define TRB_SETUP		2
1008/* data stage for control transfers */
1009#define TRB_DATA		3
1010/* status stage for control transfers */
1011#define TRB_STATUS		4
1012/* isoc transfers */
1013#define TRB_ISOC		5
1014/* TRB for linking ring segments */
1015#define TRB_LINK		6
1016#define TRB_EVENT_DATA		7
1017/* Transfer Ring No-op (not for the command ring) */
1018#define TRB_TR_NOOP		8
1019/* Command TRBs */
1020/* Enable Slot Command */
1021#define TRB_ENABLE_SLOT		9
1022/* Disable Slot Command */
1023#define TRB_DISABLE_SLOT	10
1024/* Address Device Command */
1025#define TRB_ADDR_DEV		11
1026/* Configure Endpoint Command */
1027#define TRB_CONFIG_EP		12
1028/* Evaluate Context Command */
1029#define TRB_EVAL_CONTEXT	13
1030/* Reset Endpoint Command */
1031#define TRB_RESET_EP		14
1032/* Stop Transfer Ring Command */
1033#define TRB_STOP_RING		15
1034/* Set Transfer Ring Dequeue Pointer Command */
1035#define TRB_SET_DEQ		16
1036/* Reset Device Command */
1037#define TRB_RESET_DEV		17
1038/* Force Event Command (opt) */
1039#define TRB_FORCE_EVENT		18
1040/* Negotiate Bandwidth Command (opt) */
1041#define TRB_NEG_BANDWIDTH	19
1042/* Set Latency Tolerance Value Command (opt) */
1043#define TRB_SET_LT		20
1044/* Get port bandwidth Command */
1045#define TRB_GET_BW		21
1046/* Force Header Command - generate a transaction or link management packet */
1047#define TRB_FORCE_HEADER	22
1048/* No-op Command - not for transfer rings */
1049#define TRB_CMD_NOOP		23
1050/* TRB IDs 24-31 reserved */
1051/* Event TRBS */
1052/* Transfer Event */
1053#define TRB_TRANSFER		32
1054/* Command Completion Event */
1055#define TRB_COMPLETION		33
1056/* Port Status Change Event */
1057#define TRB_PORT_STATUS		34
1058/* Bandwidth Request Event (opt) */
1059#define TRB_BANDWIDTH_EVENT	35
1060/* Doorbell Event (opt) */
1061#define TRB_DOORBELL		36
1062/* Host Controller Event */
1063#define TRB_HC_EVENT		37
1064/* Device Notification Event - device sent function wake notification */
1065#define TRB_DEV_NOTE		38
1066/* MFINDEX Wrap Event - microframe counter wrapped */
1067#define TRB_MFINDEX_WRAP	39
1068/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
1069
1070/* Nec vendor-specific command completion event. */
1071#define	TRB_NEC_CMD_COMP	48
1072/* Get NEC firmware revision. */
1073#define	TRB_NEC_GET_FW		49
1074
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1075#define TRB_TYPE_LINK(x)	(((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1076/* Above, but for __le32 types -- can avoid work by swapping constants: */
1077#define TRB_TYPE_LINK_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1078				 cpu_to_le32(TRB_TYPE(TRB_LINK)))
1079#define TRB_TYPE_NOOP_LE32(x)	(((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1080				 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1081
1082#define NEC_FW_MINOR(p)		(((p) >> 0) & 0xff)
1083#define NEC_FW_MAJOR(p)		(((p) >> 8) & 0xff)
1084
1085/*
1086 * TRBS_PER_SEGMENT must be a multiple of 4,
1087 * since the command ring is 64-byte aligned.
1088 * It must also be greater than 16.
1089 */
1090#define TRBS_PER_SEGMENT	64
1091/* Allow two commands + a link TRB, along with any reserved command TRBs */
1092#define MAX_RSVD_CMD_TRBS	(TRBS_PER_SEGMENT - 3)
1093#define SEGMENT_SIZE		(TRBS_PER_SEGMENT*16)
1094/* SEGMENT_SHIFT should be log2(SEGMENT_SIZE).
1095 * Change this if you change TRBS_PER_SEGMENT!
1096 */
1097#define SEGMENT_SHIFT		10
1098/* TRB buffer pointers can't cross 64KB boundaries */
1099#define TRB_MAX_BUFF_SHIFT		16
1100#define TRB_MAX_BUFF_SIZE	(1 << TRB_MAX_BUFF_SHIFT)
 
 
 
 
1101
1102struct xhci_segment {
1103	union xhci_trb		*trbs;
1104	/* private to HCD */
1105	struct xhci_segment	*next;
1106	dma_addr_t		dma;
 
 
 
 
 
1107};
1108
1109struct xhci_td {
1110	struct list_head	td_list;
1111	struct list_head	cancelled_td_list;
1112	struct urb		*urb;
1113	struct xhci_segment	*start_seg;
1114	union xhci_trb		*first_trb;
1115	union xhci_trb		*last_trb;
 
 
 
 
 
 
 
 
 
 
 
 
1116};
1117
1118struct xhci_dequeue_state {
1119	struct xhci_segment *new_deq_seg;
1120	union xhci_trb *new_deq_ptr;
1121	int new_cycle_state;
 
 
 
 
 
 
 
 
 
 
 
1122};
1123
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1124struct xhci_ring {
1125	struct xhci_segment	*first_seg;
 
1126	union  xhci_trb		*enqueue;
1127	struct xhci_segment	*enq_seg;
1128	unsigned int		enq_updates;
1129	union  xhci_trb		*dequeue;
1130	struct xhci_segment	*deq_seg;
1131	unsigned int		deq_updates;
1132	struct list_head	td_list;
1133	/*
1134	 * Write the cycle state into the TRB cycle field to give ownership of
1135	 * the TRB to the host controller (if we are the producer), or to check
1136	 * if we own the TRB (if we are the consumer).  See section 4.9.1.
1137	 */
1138	u32			cycle_state;
 
1139	unsigned int		stream_id;
 
 
 
 
 
1140	bool			last_td_was_short;
 
1141};
1142
1143struct xhci_erst_entry {
1144	/* 64-bit event ring segment address */
1145	__le64	seg_addr;
1146	__le32	seg_size;
1147	/* Set to zero */
1148	__le32	rsvd;
1149};
1150
1151struct xhci_erst {
1152	struct xhci_erst_entry	*entries;
1153	unsigned int		num_entries;
1154	/* xhci->event_ring keeps track of segment dma addresses */
1155	dma_addr_t		erst_dma_addr;
1156	/* Num entries the ERST can contain */
1157	unsigned int		erst_size;
1158};
1159
1160struct xhci_scratchpad {
1161	u64 *sp_array;
1162	dma_addr_t sp_dma;
1163	void **sp_buffers;
1164	dma_addr_t *sp_dma_buffers;
1165};
1166
1167struct urb_priv {
1168	int	length;
1169	int	td_cnt;
1170	struct	xhci_td	*td[0];
1171};
1172
1173/*
1174 * Each segment table entry is 4*32bits long.  1K seems like an ok size:
1175 * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
1176 * meaning 64 ring segments.
1177 * Initial allocated size of the ERST, in number of entries */
1178#define	ERST_NUM_SEGS	1
1179/* Initial allocated size of the ERST, in number of entries */
1180#define	ERST_SIZE	64
1181/* Initial number of event segment rings allocated */
1182#define	ERST_ENTRIES	1
1183/* Poll every 60 seconds */
1184#define	POLL_TIMEOUT	60
1185/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
1186#define XHCI_STOP_EP_CMD_TIMEOUT	5
1187/* XXX: Make these module parameters */
1188
1189struct s3_save {
1190	u32	command;
1191	u32	dev_nt;
1192	u64	dcbaa_ptr;
1193	u32	config_reg;
1194	u32	irq_pending;
1195	u32	irq_control;
1196	u32	erst_size;
1197	u64	erst_base;
1198	u64	erst_dequeue;
1199};
1200
 
 
 
 
 
 
1201struct xhci_bus_state {
1202	unsigned long		bus_suspended;
1203	unsigned long		next_statechange;
1204
1205	/* Port suspend arrays are indexed by the portnum of the fake roothub */
1206	/* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
1207	u32			port_c_suspend;
1208	u32			suspended_ports;
 
1209	unsigned long		resume_done[USB_MAXCHILDREN];
 
 
 
 
 
 
1210};
1211
1212static inline unsigned int hcd_index(struct usb_hcd *hcd)
1213{
1214	if (hcd->speed == HCD_USB3)
1215		return 0;
1216	else
1217		return 1;
1218}
1219
1220/* There is one ehci_hci structure per controller */
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1221struct xhci_hcd {
1222	struct usb_hcd *main_hcd;
1223	struct usb_hcd *shared_hcd;
1224	/* glue to PCI and HCD framework */
1225	struct xhci_cap_regs __iomem *cap_regs;
1226	struct xhci_op_regs __iomem *op_regs;
1227	struct xhci_run_regs __iomem *run_regs;
1228	struct xhci_doorbell_array __iomem *dba;
1229	/* Our HCD's current interrupter register set */
1230	struct	xhci_intr_reg __iomem *ir_set;
1231
1232	/* Cached register copies of read-only HC data */
1233	__u32		hcs_params1;
1234	__u32		hcs_params2;
1235	__u32		hcs_params3;
1236	__u32		hcc_params;
 
1237
1238	spinlock_t	lock;
1239
1240	/* packed release number */
1241	u8		sbrn;
1242	u16		hci_version;
1243	u8		max_slots;
1244	u8		max_interrupters;
1245	u8		max_ports;
1246	u8		isoc_threshold;
 
 
1247	int		event_ring_max;
1248	int		addr_64;
1249	/* 4KB min, 128MB max */
1250	int		page_size;
1251	/* Valid values are 12 to 20, inclusive */
1252	int		page_shift;
1253	/* msi-x vectors */
1254	int		msix_count;
1255	struct msix_entry	*msix_entries;
 
 
1256	/* data structures */
1257	struct xhci_device_context_array *dcbaa;
1258	struct xhci_ring	*cmd_ring;
 
 
 
 
 
1259	unsigned int		cmd_ring_reserved_trbs;
 
 
 
1260	struct xhci_ring	*event_ring;
1261	struct xhci_erst	erst;
1262	/* Scratchpad */
1263	struct xhci_scratchpad  *scratchpad;
 
 
1264
1265	/* slot enabling and address device helpers */
1266	struct completion	addr_dev;
1267	int slot_id;
 
 
1268	/* Internal mirror of the HW's dcbaa */
1269	struct xhci_virt_device	*devs[MAX_HC_SLOTS];
 
 
1270
1271	/* DMA pools */
1272	struct dma_pool	*device_pool;
1273	struct dma_pool	*segment_pool;
1274	struct dma_pool	*small_streams_pool;
1275	struct dma_pool	*medium_streams_pool;
1276
1277#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
1278	/* Poll the rings - for debugging */
1279	struct timer_list	event_ring_timer;
1280	int			zombie;
1281#endif
1282	/* Host controller watchdog timer structures */
1283	unsigned int		xhc_state;
1284
1285	u32			command;
1286	struct s3_save		s3;
1287/* Host controller is dying - not responding to commands. "I'm not dead yet!"
1288 *
1289 * xHC interrupts have been disabled and a watchdog timer will (or has already)
1290 * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code.  Any code
1291 * that sees this status (other than the timer that set it) should stop touching
1292 * hardware immediately.  Interrupt handlers should return immediately when
1293 * they see this status (any time they drop and re-acquire xhci->lock).
1294 * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
1295 * putting the TD on the canceled list, etc.
1296 *
1297 * There are no reports of xHCI host controllers that display this issue.
1298 */
1299#define XHCI_STATE_DYING	(1 << 0)
1300#define XHCI_STATE_HALTED	(1 << 1)
1301	/* Statistics */
1302	int			error_bitmask;
1303	unsigned int		quirks;
1304#define	XHCI_LINK_TRB_QUIRK	(1 << 0)
1305#define XHCI_RESET_EP_QUIRK	(1 << 1)
1306#define XHCI_NEC_HOST		(1 << 2)
1307#define XHCI_AMD_PLL_FIX	(1 << 3)
1308#define XHCI_SPURIOUS_SUCCESS	(1 << 4)
1309/*
1310 * Certain Intel host controllers have a limit to the number of endpoint
1311 * contexts they can handle.  Ideally, they would signal that they can't handle
1312 * anymore endpoint contexts by returning a Resource Error for the Configure
1313 * Endpoint command, but they don't.  Instead they expect software to keep track
1314 * of the number of active endpoints for them, across configure endpoint
1315 * commands, reset device commands, disable slot commands, and address device
1316 * commands.
1317 */
1318#define XHCI_EP_LIMIT_QUIRK	(1 << 5)
1319#define XHCI_BROKEN_MSI		(1 << 6)
1320#define XHCI_RESET_ON_RESUME	(1 << 7)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1321	unsigned int		num_active_eps;
1322	unsigned int		limit_active_eps;
1323	/* There are two roothubs to keep track of bus suspend info for */
1324	struct xhci_bus_state   bus_state[2];
1325	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
1326	u8			*port_array;
1327	/* Array of pointers to USB 3.0 PORTSC registers */
1328	__le32 __iomem		**usb3_ports;
1329	unsigned int		num_usb3_ports;
1330	/* Array of pointers to USB 2.0 PORTSC registers */
1331	__le32 __iomem		**usb2_ports;
1332	unsigned int		num_usb2_ports;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1333};
1334
 
 
1335/* convert between an HCD pointer and the corresponding EHCI_HCD */
1336static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
1337{
1338	return *((struct xhci_hcd **) (hcd->hcd_priv));
 
 
 
 
 
 
 
1339}
1340
1341static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
1342{
1343	return xhci->main_hcd;
1344}
1345
1346#ifdef CONFIG_USB_XHCI_HCD_DEBUGGING
1347#define XHCI_DEBUG	1
1348#else
1349#define XHCI_DEBUG	0
1350#endif
1351
1352#define xhci_dbg(xhci, fmt, args...) \
1353	do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
1354#define xhci_info(xhci, fmt, args...) \
1355	do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0)
1356#define xhci_err(xhci, fmt, args...) \
1357	dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1358#define xhci_warn(xhci, fmt, args...) \
1359	dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1360
1361/* TODO: copied from ehci.h - can be refactored? */
1362/* xHCI spec says all registers are little endian */
1363static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
1364		__le32 __iomem *regs)
1365{
1366	return readl(regs);
1367}
1368static inline void xhci_writel(struct xhci_hcd *xhci,
1369		const unsigned int val, __le32 __iomem *regs)
1370{
1371	writel(val, regs);
1372}
1373
1374/*
1375 * Registers should always be accessed with double word or quad word accesses.
1376 *
1377 * Some xHCI implementations may support 64-bit address pointers.  Registers
1378 * with 64-bit address pointers should be written to with dword accesses by
1379 * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
1380 * xHCI implementations that do not support 64-bit address pointers will ignore
1381 * the high dword, and write order is irrelevant.
1382 */
1383static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
1384		__le64 __iomem *regs)
1385{
1386	__u32 __iomem *ptr = (__u32 __iomem *) regs;
1387	u64 val_lo = readl(ptr);
1388	u64 val_hi = readl(ptr + 1);
1389	return val_lo + (val_hi << 32);
1390}
1391static inline void xhci_write_64(struct xhci_hcd *xhci,
1392				 const u64 val, __le64 __iomem *regs)
1393{
1394	__u32 __iomem *ptr = (__u32 __iomem *) regs;
1395	u32 val_lo = lower_32_bits(val);
1396	u32 val_hi = upper_32_bits(val);
1397
1398	writel(val_lo, ptr);
1399	writel(val_hi, ptr + 1);
1400}
1401
1402static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
1403{
1404	u32 temp = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
1405	return ((HC_VERSION(temp) == 0x95) &&
1406			(xhci->quirks & XHCI_LINK_TRB_QUIRK));
1407}
1408
1409/* xHCI debugging */
1410void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
1411void xhci_print_registers(struct xhci_hcd *xhci);
1412void xhci_dbg_regs(struct xhci_hcd *xhci);
1413void xhci_print_run_regs(struct xhci_hcd *xhci);
1414void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
1415void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
1416void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
1417void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
1418void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
1419void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
1420void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
1421void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
1422char *xhci_get_slot_state(struct xhci_hcd *xhci,
1423		struct xhci_container_ctx *ctx);
1424void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
1425		unsigned int slot_id, unsigned int ep_index,
1426		struct xhci_virt_ep *ep);
1427
1428/* xHCI memory management */
1429void xhci_mem_cleanup(struct xhci_hcd *xhci);
1430int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
1431void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
1432int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
1433int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
1434void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
1435		struct usb_device *udev);
1436unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
1437unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
1438unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
1439unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
1440void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
 
 
 
 
 
 
 
 
1441void xhci_endpoint_copy(struct xhci_hcd *xhci,
1442		struct xhci_container_ctx *in_ctx,
1443		struct xhci_container_ctx *out_ctx,
1444		unsigned int ep_index);
1445void xhci_slot_copy(struct xhci_hcd *xhci,
1446		struct xhci_container_ctx *in_ctx,
1447		struct xhci_container_ctx *out_ctx);
1448int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
1449		struct usb_device *udev, struct usb_host_endpoint *ep,
1450		gfp_t mem_flags);
 
 
 
1451void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
1452void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
 
 
 
 
 
 
 
 
 
1453		struct xhci_virt_device *virt_dev,
1454		unsigned int ep_index);
1455struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
1456		unsigned int num_stream_ctxs,
1457		unsigned int num_streams, gfp_t flags);
 
1458void xhci_free_stream_info(struct xhci_hcd *xhci,
1459		struct xhci_stream_info *stream_info);
1460void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
1461		struct xhci_ep_ctx *ep_ctx,
1462		struct xhci_stream_info *stream_info);
1463void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
1464		struct xhci_ep_ctx *ep_ctx,
1465		struct xhci_virt_ep *ep);
1466void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
1467	struct xhci_virt_device *virt_dev, bool drop_control_ep);
1468struct xhci_ring *xhci_dma_to_transfer_ring(
1469		struct xhci_virt_ep *ep,
1470		u64 address);
1471struct xhci_ring *xhci_stream_id_to_ring(
1472		struct xhci_virt_device *dev,
1473		unsigned int ep_index,
1474		unsigned int stream_id);
1475struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
1476		bool allocate_in_ctx, bool allocate_completion,
1477		gfp_t mem_flags);
1478void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
 
1479void xhci_free_command(struct xhci_hcd *xhci,
1480		struct xhci_command *command);
1481
1482#ifdef CONFIG_PCI
1483/* xHCI PCI glue */
1484int xhci_register_pci(void);
1485void xhci_unregister_pci(void);
1486#endif
1487
1488/* xHCI host controller glue */
 
 
1489void xhci_quiesce(struct xhci_hcd *xhci);
1490int xhci_halt(struct xhci_hcd *xhci);
 
1491int xhci_reset(struct xhci_hcd *xhci);
1492int xhci_init(struct usb_hcd *hcd);
1493int xhci_run(struct usb_hcd *hcd);
1494void xhci_stop(struct usb_hcd *hcd);
1495void xhci_shutdown(struct usb_hcd *hcd);
 
 
 
 
1496
1497#ifdef	CONFIG_PM
1498int xhci_suspend(struct xhci_hcd *xhci);
1499int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
1500#else
1501#define	xhci_suspend	NULL
1502#define	xhci_resume	NULL
1503#endif
1504
1505int xhci_get_frame(struct usb_hcd *hcd);
1506irqreturn_t xhci_irq(struct usb_hcd *hcd);
1507irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd);
1508int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
1509void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
1510int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1511		struct usb_host_endpoint **eps, unsigned int num_eps,
1512		unsigned int num_streams, gfp_t mem_flags);
1513int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1514		struct usb_host_endpoint **eps, unsigned int num_eps,
1515		gfp_t mem_flags);
1516int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
1517int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
1518			struct usb_tt *tt, gfp_t mem_flags);
1519int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
1520int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
1521int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1522int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1523void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
1524int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
1525int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1526void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1527
1528/* xHCI ring, segment, TRB, and TD functions */
1529dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
1530struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1531		union xhci_trb *start_trb, union xhci_trb *end_trb,
1532		dma_addr_t suspect_dma);
1533int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
1534void xhci_ring_cmd_db(struct xhci_hcd *xhci);
1535int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
1536int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1537		u32 slot_id);
1538int xhci_queue_vendor_command(struct xhci_hcd *xhci,
 
1539		u32 field1, u32 field2, u32 field3, u32 field4);
1540int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
1541		unsigned int ep_index, int suspend);
1542int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1543		int slot_id, unsigned int ep_index);
1544int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1545		int slot_id, unsigned int ep_index);
1546int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1547		int slot_id, unsigned int ep_index);
1548int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
1549		struct urb *urb, int slot_id, unsigned int ep_index);
1550int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1551		u32 slot_id, bool command_must_succeed);
1552int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 
 
 
 
 
 
1553		u32 slot_id);
1554int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
1555		unsigned int ep_index);
1556int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
1557void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
1558		unsigned int slot_id, unsigned int ep_index,
1559		unsigned int stream_id, struct xhci_td *cur_td,
1560		struct xhci_dequeue_state *state);
1561void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
1562		unsigned int slot_id, unsigned int ep_index,
1563		unsigned int stream_id,
1564		struct xhci_dequeue_state *deq_state);
1565void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
1566		struct usb_device *udev, unsigned int ep_index);
1567void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
1568		unsigned int slot_id, unsigned int ep_index,
1569		struct xhci_dequeue_state *deq_state);
1570void xhci_stop_endpoint_command_watchdog(unsigned long arg);
 
 
 
 
 
1571void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
1572		unsigned int ep_index, unsigned int stream_id);
 
 
 
 
 
 
1573
1574/* xHCI roothub code */
 
 
 
 
1575int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
1576		char *buf, u16 wLength);
1577int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 
 
 
 
1578
1579#ifdef CONFIG_PM
1580int xhci_bus_suspend(struct usb_hcd *hcd);
1581int xhci_bus_resume(struct usb_hcd *hcd);
 
1582#else
1583#define	xhci_bus_suspend	NULL
1584#define	xhci_bus_resume		NULL
 
1585#endif	/* CONFIG_PM */
1586
1587u32 xhci_port_state_to_neutral(u32 state);
1588int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
1589		u16 port);
1590void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
1591
1592/* xHCI contexts */
1593struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1594struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1595struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1596
1597#endif /* __LINUX_XHCI_HCD_H */