Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * platform.c - DesignWare HS OTG Controller platform driver
4 *
5 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. The names of the above-listed copyright holders may not be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any
23 * later version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 */
37
38#include <linux/kernel.h>
39#include <linux/module.h>
40#include <linux/slab.h>
41#include <linux/clk.h>
42#include <linux/device.h>
43#include <linux/dma-mapping.h>
44#include <linux/of_device.h>
45#include <linux/mutex.h>
46#include <linux/platform_device.h>
47#include <linux/phy/phy.h>
48#include <linux/platform_data/s3c-hsotg.h>
49#include <linux/reset.h>
50
51#include <linux/usb/of.h>
52
53#include "core.h"
54#include "hcd.h"
55#include "debug.h"
56
57static const char dwc2_driver_name[] = "dwc2";
58
59/*
60 * Check the dr_mode against the module configuration and hardware
61 * capabilities.
62 *
63 * The hardware, module, and dr_mode, can each be set to host, device,
64 * or otg. Check that all these values are compatible and adjust the
65 * value of dr_mode if possible.
66 *
67 * actual
68 * HW MOD dr_mode dr_mode
69 * ------------------------------
70 * HST HST any : HST
71 * HST DEV any : ---
72 * HST OTG any : HST
73 *
74 * DEV HST any : ---
75 * DEV DEV any : DEV
76 * DEV OTG any : DEV
77 *
78 * OTG HST any : HST
79 * OTG DEV any : DEV
80 * OTG OTG any : dr_mode
81 */
82static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
83{
84 enum usb_dr_mode mode;
85
86 hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
87 if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
88 hsotg->dr_mode = USB_DR_MODE_OTG;
89
90 mode = hsotg->dr_mode;
91
92 if (dwc2_hw_is_device(hsotg)) {
93 if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
94 dev_err(hsotg->dev,
95 "Controller does not support host mode.\n");
96 return -EINVAL;
97 }
98 mode = USB_DR_MODE_PERIPHERAL;
99 } else if (dwc2_hw_is_host(hsotg)) {
100 if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
101 dev_err(hsotg->dev,
102 "Controller does not support device mode.\n");
103 return -EINVAL;
104 }
105 mode = USB_DR_MODE_HOST;
106 } else {
107 if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
108 mode = USB_DR_MODE_HOST;
109 else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
110 mode = USB_DR_MODE_PERIPHERAL;
111 }
112
113 if (mode != hsotg->dr_mode) {
114 dev_warn(hsotg->dev,
115 "Configuration mismatch. dr_mode forced to %s\n",
116 mode == USB_DR_MODE_HOST ? "host" : "device");
117
118 hsotg->dr_mode = mode;
119 }
120
121 return 0;
122}
123
124static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
125{
126 struct platform_device *pdev = to_platform_device(hsotg->dev);
127 int ret;
128
129 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
130 hsotg->supplies);
131 if (ret)
132 return ret;
133
134 if (hsotg->clk) {
135 ret = clk_prepare_enable(hsotg->clk);
136 if (ret)
137 return ret;
138 }
139
140 if (hsotg->uphy) {
141 ret = usb_phy_init(hsotg->uphy);
142 } else if (hsotg->plat && hsotg->plat->phy_init) {
143 ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
144 } else {
145 ret = phy_power_on(hsotg->phy);
146 if (ret == 0)
147 ret = phy_init(hsotg->phy);
148 }
149
150 return ret;
151}
152
153/**
154 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
155 * @hsotg: The driver state
156 *
157 * A wrapper for platform code responsible for controlling
158 * low-level USB platform resources (phy, clock, regulators)
159 */
160int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
161{
162 int ret = __dwc2_lowlevel_hw_enable(hsotg);
163
164 if (ret == 0)
165 hsotg->ll_hw_enabled = true;
166 return ret;
167}
168
169static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
170{
171 struct platform_device *pdev = to_platform_device(hsotg->dev);
172 int ret = 0;
173
174 if (hsotg->uphy) {
175 usb_phy_shutdown(hsotg->uphy);
176 } else if (hsotg->plat && hsotg->plat->phy_exit) {
177 ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
178 } else {
179 ret = phy_exit(hsotg->phy);
180 if (ret == 0)
181 ret = phy_power_off(hsotg->phy);
182 }
183 if (ret)
184 return ret;
185
186 if (hsotg->clk)
187 clk_disable_unprepare(hsotg->clk);
188
189 ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
190 hsotg->supplies);
191
192 return ret;
193}
194
195/**
196 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
197 * @hsotg: The driver state
198 *
199 * A wrapper for platform code responsible for controlling
200 * low-level USB platform resources (phy, clock, regulators)
201 */
202int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
203{
204 int ret = __dwc2_lowlevel_hw_disable(hsotg);
205
206 if (ret == 0)
207 hsotg->ll_hw_enabled = false;
208 return ret;
209}
210
211static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
212{
213 int i, ret;
214
215 hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
216 if (IS_ERR(hsotg->reset)) {
217 ret = PTR_ERR(hsotg->reset);
218 dev_err(hsotg->dev, "error getting reset control %d\n", ret);
219 return ret;
220 }
221
222 reset_control_deassert(hsotg->reset);
223
224 hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
225 if (IS_ERR(hsotg->reset_ecc)) {
226 ret = PTR_ERR(hsotg->reset_ecc);
227 dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
228 return ret;
229 }
230
231 reset_control_deassert(hsotg->reset_ecc);
232
233 /*
234 * Attempt to find a generic PHY, then look for an old style
235 * USB PHY and then fall back to pdata
236 */
237 hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
238 if (IS_ERR(hsotg->phy)) {
239 ret = PTR_ERR(hsotg->phy);
240 switch (ret) {
241 case -ENODEV:
242 case -ENOSYS:
243 hsotg->phy = NULL;
244 break;
245 case -EPROBE_DEFER:
246 return ret;
247 default:
248 dev_err(hsotg->dev, "error getting phy %d\n", ret);
249 return ret;
250 }
251 }
252
253 if (!hsotg->phy) {
254 hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
255 if (IS_ERR(hsotg->uphy)) {
256 ret = PTR_ERR(hsotg->uphy);
257 switch (ret) {
258 case -ENODEV:
259 case -ENXIO:
260 hsotg->uphy = NULL;
261 break;
262 case -EPROBE_DEFER:
263 return ret;
264 default:
265 dev_err(hsotg->dev, "error getting usb phy %d\n",
266 ret);
267 return ret;
268 }
269 }
270 }
271
272 hsotg->plat = dev_get_platdata(hsotg->dev);
273
274 /* Clock */
275 hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
276 if (IS_ERR(hsotg->clk)) {
277 dev_err(hsotg->dev, "cannot get otg clock\n");
278 return PTR_ERR(hsotg->clk);
279 }
280
281 /* Regulators */
282 for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
283 hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
284
285 ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
286 hsotg->supplies);
287 if (ret) {
288 if (ret != -EPROBE_DEFER)
289 dev_err(hsotg->dev, "failed to request supplies: %d\n",
290 ret);
291 return ret;
292 }
293 return 0;
294}
295
296/**
297 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
298 * DWC_otg driver
299 *
300 * @dev: Platform device
301 *
302 * This routine is called, for example, when the rmmod command is executed. The
303 * device may or may not be electrically present. If it is present, the driver
304 * stops device processing. Any resources used on behalf of this device are
305 * freed.
306 */
307static int dwc2_driver_remove(struct platform_device *dev)
308{
309 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
310
311 dwc2_debugfs_exit(hsotg);
312 if (hsotg->hcd_enabled)
313 dwc2_hcd_remove(hsotg);
314 if (hsotg->gadget_enabled)
315 dwc2_hsotg_remove(hsotg);
316
317 if (hsotg->params.activate_stm_id_vb_detection)
318 regulator_disable(hsotg->usb33d);
319
320 if (hsotg->ll_hw_enabled)
321 dwc2_lowlevel_hw_disable(hsotg);
322
323 reset_control_assert(hsotg->reset);
324 reset_control_assert(hsotg->reset_ecc);
325
326 return 0;
327}
328
329/**
330 * dwc2_driver_shutdown() - Called on device shutdown
331 *
332 * @dev: Platform device
333 *
334 * In specific conditions (involving usb hubs) dwc2 devices can create a
335 * lot of interrupts, even to the point of overwhelming devices running
336 * at low frequencies. Some devices need to do special clock handling
337 * at shutdown-time which may bring the system clock below the threshold
338 * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
339 * prevents reboots/poweroffs from getting stuck in such cases.
340 */
341static void dwc2_driver_shutdown(struct platform_device *dev)
342{
343 struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
344
345 dwc2_disable_global_interrupts(hsotg);
346 synchronize_irq(hsotg->irq);
347}
348
349/**
350 * dwc2_check_core_endianness() - Returns true if core and AHB have
351 * opposite endianness.
352 * @hsotg: Programming view of the DWC_otg controller.
353 */
354static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
355{
356 u32 snpsid;
357
358 snpsid = ioread32(hsotg->regs + GSNPSID);
359 if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
360 (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
361 (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
362 return false;
363 return true;
364}
365
366/**
367 * Check core version
368 *
369 * @hsotg: Programming view of the DWC_otg controller
370 *
371 */
372int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
373{
374 struct dwc2_hw_params *hw = &hsotg->hw_params;
375
376 /*
377 * Attempt to ensure this device is really a DWC_otg Controller.
378 * Read and verify the GSNPSID register contents. The value should be
379 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
380 */
381
382 hw->snpsid = dwc2_readl(hsotg, GSNPSID);
383 if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
384 (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
385 (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
386 dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
387 hw->snpsid);
388 return -ENODEV;
389 }
390
391 dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
392 hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
393 hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
394 return 0;
395}
396
397/**
398 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
399 * driver
400 *
401 * @dev: Platform device
402 *
403 * This routine creates the driver components required to control the device
404 * (core, HCD, and PCD) and initializes the device. The driver components are
405 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
406 * in the device private data. This allows the driver to access the dwc2_hsotg
407 * structure on subsequent calls to driver methods for this device.
408 */
409static int dwc2_driver_probe(struct platform_device *dev)
410{
411 struct dwc2_hsotg *hsotg;
412 struct resource *res;
413 int retval;
414
415 hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
416 if (!hsotg)
417 return -ENOMEM;
418
419 hsotg->dev = &dev->dev;
420
421 /*
422 * Use reasonable defaults so platforms don't have to provide these.
423 */
424 if (!dev->dev.dma_mask)
425 dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
426 retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
427 if (retval) {
428 dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
429 return retval;
430 }
431
432 hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
433 if (IS_ERR(hsotg->regs))
434 return PTR_ERR(hsotg->regs);
435
436 dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
437 (unsigned long)res->start, hsotg->regs);
438
439 retval = dwc2_lowlevel_hw_init(hsotg);
440 if (retval)
441 return retval;
442
443 spin_lock_init(&hsotg->lock);
444
445 hsotg->irq = platform_get_irq(dev, 0);
446 if (hsotg->irq < 0)
447 return hsotg->irq;
448
449 dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
450 hsotg->irq);
451 retval = devm_request_irq(hsotg->dev, hsotg->irq,
452 dwc2_handle_common_intr, IRQF_SHARED,
453 dev_name(hsotg->dev), hsotg);
454 if (retval)
455 return retval;
456
457 hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
458 if (IS_ERR(hsotg->vbus_supply)) {
459 retval = PTR_ERR(hsotg->vbus_supply);
460 hsotg->vbus_supply = NULL;
461 if (retval != -ENODEV)
462 return retval;
463 }
464
465 retval = dwc2_lowlevel_hw_enable(hsotg);
466 if (retval)
467 return retval;
468
469 hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
470
471 retval = dwc2_get_dr_mode(hsotg);
472 if (retval)
473 goto error;
474
475 hsotg->need_phy_for_wake =
476 of_property_read_bool(dev->dev.of_node,
477 "snps,need-phy-for-wake");
478
479 /*
480 * Before performing any core related operations
481 * check core version.
482 */
483 retval = dwc2_check_core_version(hsotg);
484 if (retval)
485 goto error;
486
487 /*
488 * Reset before dwc2_get_hwparams() then it could get power-on real
489 * reset value form registers.
490 */
491 retval = dwc2_core_reset(hsotg, false);
492 if (retval)
493 goto error;
494
495 /* Detect config values from hardware */
496 retval = dwc2_get_hwparams(hsotg);
497 if (retval)
498 goto error;
499
500 /*
501 * For OTG cores, set the force mode bits to reflect the value
502 * of dr_mode. Force mode bits should not be touched at any
503 * other time after this.
504 */
505 dwc2_force_dr_mode(hsotg);
506
507 retval = dwc2_init_params(hsotg);
508 if (retval)
509 goto error;
510
511 if (hsotg->params.activate_stm_id_vb_detection) {
512 u32 ggpio;
513
514 hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
515 if (IS_ERR(hsotg->usb33d)) {
516 retval = PTR_ERR(hsotg->usb33d);
517 if (retval != -EPROBE_DEFER)
518 dev_err(hsotg->dev,
519 "failed to request usb33d supply: %d\n",
520 retval);
521 goto error;
522 }
523 retval = regulator_enable(hsotg->usb33d);
524 if (retval) {
525 dev_err(hsotg->dev,
526 "failed to enable usb33d supply: %d\n", retval);
527 goto error;
528 }
529
530 ggpio = dwc2_readl(hsotg, GGPIO);
531 ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
532 ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
533 dwc2_writel(hsotg, ggpio, GGPIO);
534 }
535
536 if (hsotg->dr_mode != USB_DR_MODE_HOST) {
537 retval = dwc2_gadget_init(hsotg);
538 if (retval)
539 goto error_init;
540 hsotg->gadget_enabled = 1;
541 }
542
543 /*
544 * If we need PHY for wakeup we must be wakeup capable.
545 * When we have a device that can wake without the PHY we
546 * can adjust this condition.
547 */
548 if (hsotg->need_phy_for_wake)
549 device_set_wakeup_capable(&dev->dev, true);
550
551 hsotg->reset_phy_on_wake =
552 of_property_read_bool(dev->dev.of_node,
553 "snps,reset-phy-on-wake");
554 if (hsotg->reset_phy_on_wake && !hsotg->phy) {
555 dev_warn(hsotg->dev,
556 "Quirk reset-phy-on-wake only supports generic PHYs\n");
557 hsotg->reset_phy_on_wake = false;
558 }
559
560 if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
561 retval = dwc2_hcd_init(hsotg);
562 if (retval) {
563 if (hsotg->gadget_enabled)
564 dwc2_hsotg_remove(hsotg);
565 goto error_init;
566 }
567 hsotg->hcd_enabled = 1;
568 }
569
570 platform_set_drvdata(dev, hsotg);
571 hsotg->hibernated = 0;
572
573 dwc2_debugfs_init(hsotg);
574
575 /* Gadget code manages lowlevel hw on its own */
576 if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
577 dwc2_lowlevel_hw_disable(hsotg);
578
579#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
580 IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
581 /* Postponed adding a new gadget to the udc class driver list */
582 if (hsotg->gadget_enabled) {
583 retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
584 if (retval) {
585 hsotg->gadget.udc = NULL;
586 dwc2_hsotg_remove(hsotg);
587 goto error_init;
588 }
589 }
590#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
591 return 0;
592
593error_init:
594 if (hsotg->params.activate_stm_id_vb_detection)
595 regulator_disable(hsotg->usb33d);
596error:
597 if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
598 dwc2_lowlevel_hw_disable(hsotg);
599 return retval;
600}
601
602static int __maybe_unused dwc2_suspend(struct device *dev)
603{
604 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
605 bool is_device_mode = dwc2_is_device_mode(dwc2);
606 int ret = 0;
607
608 if (is_device_mode)
609 dwc2_hsotg_suspend(dwc2);
610
611 if (dwc2->params.activate_stm_id_vb_detection) {
612 unsigned long flags;
613 u32 ggpio, gotgctl;
614
615 /*
616 * Need to force the mode to the current mode to avoid Mode
617 * Mismatch Interrupt when ID detection will be disabled.
618 */
619 dwc2_force_mode(dwc2, !is_device_mode);
620
621 spin_lock_irqsave(&dwc2->lock, flags);
622 gotgctl = dwc2_readl(dwc2, GOTGCTL);
623 /* bypass debounce filter, enable overrides */
624 gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
625 gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
626 /* Force A / B session if needed */
627 if (gotgctl & GOTGCTL_ASESVLD)
628 gotgctl |= GOTGCTL_AVALOVAL;
629 if (gotgctl & GOTGCTL_BSESVLD)
630 gotgctl |= GOTGCTL_BVALOVAL;
631 dwc2_writel(dwc2, gotgctl, GOTGCTL);
632 spin_unlock_irqrestore(&dwc2->lock, flags);
633
634 ggpio = dwc2_readl(dwc2, GGPIO);
635 ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
636 ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
637 dwc2_writel(dwc2, ggpio, GGPIO);
638
639 regulator_disable(dwc2->usb33d);
640 }
641
642 if (dwc2->ll_hw_enabled &&
643 (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
644 ret = __dwc2_lowlevel_hw_disable(dwc2);
645 dwc2->phy_off_for_suspend = true;
646 }
647
648 return ret;
649}
650
651static int __maybe_unused dwc2_resume(struct device *dev)
652{
653 struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
654 int ret = 0;
655
656 if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
657 ret = __dwc2_lowlevel_hw_enable(dwc2);
658 if (ret)
659 return ret;
660 }
661 dwc2->phy_off_for_suspend = false;
662
663 if (dwc2->params.activate_stm_id_vb_detection) {
664 unsigned long flags;
665 u32 ggpio, gotgctl;
666
667 ret = regulator_enable(dwc2->usb33d);
668 if (ret)
669 return ret;
670
671 ggpio = dwc2_readl(dwc2, GGPIO);
672 ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
673 ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
674 dwc2_writel(dwc2, ggpio, GGPIO);
675
676 /* ID/VBUS detection startup time */
677 usleep_range(5000, 7000);
678
679 spin_lock_irqsave(&dwc2->lock, flags);
680 gotgctl = dwc2_readl(dwc2, GOTGCTL);
681 gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
682 gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
683 GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
684 dwc2_writel(dwc2, gotgctl, GOTGCTL);
685 spin_unlock_irqrestore(&dwc2->lock, flags);
686 }
687
688 /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
689 dwc2_force_dr_mode(dwc2);
690
691 if (dwc2_is_device_mode(dwc2))
692 ret = dwc2_hsotg_resume(dwc2);
693
694 return ret;
695}
696
697static const struct dev_pm_ops dwc2_dev_pm_ops = {
698 SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
699};
700
701static struct platform_driver dwc2_platform_driver = {
702 .driver = {
703 .name = dwc2_driver_name,
704 .of_match_table = dwc2_of_match_table,
705 .pm = &dwc2_dev_pm_ops,
706 },
707 .probe = dwc2_driver_probe,
708 .remove = dwc2_driver_remove,
709 .shutdown = dwc2_driver_shutdown,
710};
711
712module_platform_driver(dwc2_platform_driver);
713
714MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
715MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
716MODULE_LICENSE("Dual BSD/GPL");