Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: GPL-2.0-only
  2/* intel_pch_thermal.c - Intel PCH Thermal driver
  3 *
  4 * Copyright (c) 2015, Intel Corporation.
  5 *
  6 * Authors:
  7 *     Tushar Dave <tushar.n.dave@intel.com>
  8 */
  9
 10#include <linux/module.h>
 11#include <linux/types.h>
 12#include <linux/init.h>
 13#include <linux/pci.h>
 14#include <linux/acpi.h>
 15#include <linux/thermal.h>
 16#include <linux/units.h>
 17#include <linux/pm.h>
 18
 19/* Intel PCH thermal Device IDs */
 20#define PCH_THERMAL_DID_HSW_1	0x9C24 /* Haswell PCH */
 21#define PCH_THERMAL_DID_HSW_2	0x8C24 /* Haswell PCH */
 22#define PCH_THERMAL_DID_WPT	0x9CA4 /* Wildcat Point */
 23#define PCH_THERMAL_DID_SKL	0x9D31 /* Skylake PCH */
 24#define PCH_THERMAL_DID_SKL_H	0xA131 /* Skylake PCH 100 series */
 25#define PCH_THERMAL_DID_CNL	0x9Df9 /* CNL PCH */
 26#define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
 27#define PCH_THERMAL_DID_CNL_LP	0x02F9 /* CNL-LP PCH */
 28#define PCH_THERMAL_DID_CML_H	0X06F9 /* CML-H PCH */
 29
 30/* Wildcat Point-LP  PCH Thermal registers */
 31#define WPT_TEMP	0x0000	/* Temperature */
 32#define WPT_TSC	0x04	/* Thermal Sensor Control */
 33#define WPT_TSS	0x06	/* Thermal Sensor Status */
 34#define WPT_TSEL	0x08	/* Thermal Sensor Enable and Lock */
 35#define WPT_TSREL	0x0A	/* Thermal Sensor Report Enable and Lock */
 36#define WPT_TSMIC	0x0C	/* Thermal Sensor SMI Control */
 37#define WPT_CTT	0x0010	/* Catastrophic Trip Point */
 38#define WPT_TAHV	0x0014	/* Thermal Alert High Value */
 39#define WPT_TALV	0x0018	/* Thermal Alert Low Value */
 40#define WPT_TL		0x00000040	/* Throttle Value */
 41#define WPT_PHL	0x0060	/* PCH Hot Level */
 42#define WPT_PHLC	0x62	/* PHL Control */
 43#define WPT_TAS	0x80	/* Thermal Alert Status */
 44#define WPT_TSPIEN	0x82	/* PCI Interrupt Event Enables */
 45#define WPT_TSGPEN	0x84	/* General Purpose Event Enables */
 46
 47/*  Wildcat Point-LP  PCH Thermal Register bit definitions */
 48#define WPT_TEMP_TSR	0x01ff	/* Temp TS Reading */
 49#define WPT_TSC_CPDE	0x01	/* Catastrophic Power-Down Enable */
 50#define WPT_TSS_TSDSS	0x10	/* Thermal Sensor Dynamic Shutdown Status */
 51#define WPT_TSS_GPES	0x08	/* GPE status */
 52#define WPT_TSEL_ETS	0x01    /* Enable TS */
 53#define WPT_TSEL_PLDB	0x80	/* TSEL Policy Lock-Down Bit */
 54#define WPT_TL_TOL	0x000001FF	/* T0 Level */
 55#define WPT_TL_T1L	0x1ff00000	/* T1 Level */
 56#define WPT_TL_TTEN	0x20000000	/* TT Enable */
 57
 58static char driver_name[] = "Intel PCH thermal driver";
 59
 60struct pch_thermal_device {
 61	void __iomem *hw_base;
 62	const struct pch_dev_ops *ops;
 63	struct pci_dev *pdev;
 64	struct thermal_zone_device *tzd;
 65	int crt_trip_id;
 66	unsigned long crt_temp;
 67	int hot_trip_id;
 68	unsigned long hot_temp;
 69	int psv_trip_id;
 70	unsigned long psv_temp;
 71	bool bios_enabled;
 72};
 73
 74#ifdef CONFIG_ACPI
 75
 76/*
 77 * On some platforms, there is a companion ACPI device, which adds
 78 * passive trip temperature using _PSV method. There is no specific
 79 * passive temperature setting in MMIO interface of this PCI device.
 80 */
 81static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
 82				      int *nr_trips)
 83{
 84	struct acpi_device *adev;
 85
 86	ptd->psv_trip_id = -1;
 87
 88	adev = ACPI_COMPANION(&ptd->pdev->dev);
 89	if (adev) {
 90		unsigned long long r;
 91		acpi_status status;
 92
 93		status = acpi_evaluate_integer(adev->handle, "_PSV", NULL,
 94					       &r);
 95		if (ACPI_SUCCESS(status)) {
 96			unsigned long trip_temp;
 97
 98			trip_temp = deci_kelvin_to_millicelsius(r);
 99			if (trip_temp) {
100				ptd->psv_temp = trip_temp;
101				ptd->psv_trip_id = *nr_trips;
102				++(*nr_trips);
103			}
104		}
105	}
106}
107#else
108static void pch_wpt_add_acpi_psv_trip(struct pch_thermal_device *ptd,
109				      int *nr_trips)
110{
111	ptd->psv_trip_id = -1;
112
113}
114#endif
115
116static int pch_wpt_init(struct pch_thermal_device *ptd, int *nr_trips)
117{
118	u8 tsel;
119	u16 trip_temp;
120
121	*nr_trips = 0;
122
123	/* Check if BIOS has already enabled thermal sensor */
124	if (WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL)) {
125		ptd->bios_enabled = true;
126		goto read_trips;
127	}
128
129	tsel = readb(ptd->hw_base + WPT_TSEL);
130	/*
131	 * When TSEL's Policy Lock-Down bit is 1, TSEL become RO.
132	 * If so, thermal sensor cannot enable. Bail out.
133	 */
134	if (tsel & WPT_TSEL_PLDB) {
135		dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
136		return -ENODEV;
137	}
138
139	writeb(tsel|WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
140	if (!(WPT_TSEL_ETS & readb(ptd->hw_base + WPT_TSEL))) {
141		dev_err(&ptd->pdev->dev, "Sensor can't be enabled\n");
142		return -ENODEV;
143	}
144
145read_trips:
146	ptd->crt_trip_id = -1;
147	trip_temp = readw(ptd->hw_base + WPT_CTT);
148	trip_temp &= 0x1FF;
149	if (trip_temp) {
150		/* Resolution of 1/2 degree C and an offset of -50C */
151		ptd->crt_temp = trip_temp * 1000 / 2 - 50000;
152		ptd->crt_trip_id = 0;
153		++(*nr_trips);
154	}
155
156	ptd->hot_trip_id = -1;
157	trip_temp = readw(ptd->hw_base + WPT_PHL);
158	trip_temp &= 0x1FF;
159	if (trip_temp) {
160		/* Resolution of 1/2 degree C and an offset of -50C */
161		ptd->hot_temp = trip_temp * 1000 / 2 - 50000;
162		ptd->hot_trip_id = *nr_trips;
163		++(*nr_trips);
164	}
165
166	pch_wpt_add_acpi_psv_trip(ptd, nr_trips);
167
168	return 0;
169}
170
171static int pch_wpt_get_temp(struct pch_thermal_device *ptd, int *temp)
172{
173	u16 wpt_temp;
174
175	wpt_temp = WPT_TEMP_TSR & readw(ptd->hw_base + WPT_TEMP);
176
177	/* Resolution of 1/2 degree C and an offset of -50C */
178	*temp = (wpt_temp * 1000 / 2 - 50000);
179
180	return 0;
181}
182
183static int pch_wpt_suspend(struct pch_thermal_device *ptd)
184{
185	u8 tsel;
186
187	if (ptd->bios_enabled)
188		return 0;
189
190	tsel = readb(ptd->hw_base + WPT_TSEL);
191
192	writeb(tsel & 0xFE, ptd->hw_base + WPT_TSEL);
193
194	return 0;
195}
196
197static int pch_wpt_resume(struct pch_thermal_device *ptd)
198{
199	u8 tsel;
200
201	if (ptd->bios_enabled)
202		return 0;
203
204	tsel = readb(ptd->hw_base + WPT_TSEL);
205
206	writeb(tsel | WPT_TSEL_ETS, ptd->hw_base + WPT_TSEL);
207
208	return 0;
209}
210
211struct pch_dev_ops {
212	int (*hw_init)(struct pch_thermal_device *ptd, int *nr_trips);
213	int (*get_temp)(struct pch_thermal_device *ptd, int *temp);
214	int (*suspend)(struct pch_thermal_device *ptd);
215	int (*resume)(struct pch_thermal_device *ptd);
216};
217
218
219/* dev ops for Wildcat Point */
220static const struct pch_dev_ops pch_dev_ops_wpt = {
221	.hw_init = pch_wpt_init,
222	.get_temp = pch_wpt_get_temp,
223	.suspend = pch_wpt_suspend,
224	.resume = pch_wpt_resume,
225};
226
227static int pch_thermal_get_temp(struct thermal_zone_device *tzd, int *temp)
228{
229	struct pch_thermal_device *ptd = tzd->devdata;
230
231	return	ptd->ops->get_temp(ptd, temp);
232}
233
234static int pch_get_trip_type(struct thermal_zone_device *tzd, int trip,
235			     enum thermal_trip_type *type)
236{
237	struct pch_thermal_device *ptd = tzd->devdata;
238
239	if (ptd->crt_trip_id == trip)
240		*type = THERMAL_TRIP_CRITICAL;
241	else if (ptd->hot_trip_id == trip)
242		*type = THERMAL_TRIP_HOT;
243	else if (ptd->psv_trip_id == trip)
244		*type = THERMAL_TRIP_PASSIVE;
245	else
246		return -EINVAL;
247
248	return 0;
249}
250
251static int pch_get_trip_temp(struct thermal_zone_device *tzd, int trip, int *temp)
252{
253	struct pch_thermal_device *ptd = tzd->devdata;
254
255	if (ptd->crt_trip_id == trip)
256		*temp = ptd->crt_temp;
257	else if (ptd->hot_trip_id == trip)
258		*temp = ptd->hot_temp;
259	else if (ptd->psv_trip_id == trip)
260		*temp = ptd->psv_temp;
261	else
262		return -EINVAL;
263
264	return 0;
265}
266
267static struct thermal_zone_device_ops tzd_ops = {
268	.get_temp = pch_thermal_get_temp,
269	.get_trip_type = pch_get_trip_type,
270	.get_trip_temp = pch_get_trip_temp,
271};
272
273enum board_ids {
274	board_hsw,
275	board_wpt,
276	board_skl,
277	board_cnl,
278	board_cml,
279};
280
281static const struct board_info {
282	const char *name;
283	const struct pch_dev_ops *ops;
284} board_info[] = {
285	[board_hsw] = {
286		.name = "pch_haswell",
287		.ops = &pch_dev_ops_wpt,
288	},
289	[board_wpt] = {
290		.name = "pch_wildcat_point",
291		.ops = &pch_dev_ops_wpt,
292	},
293	[board_skl] = {
294		.name = "pch_skylake",
295		.ops = &pch_dev_ops_wpt,
296	},
297	[board_cnl] = {
298		.name = "pch_cannonlake",
299		.ops = &pch_dev_ops_wpt,
300	},
301	[board_cml] = {
302		.name = "pch_cometlake",
303		.ops = &pch_dev_ops_wpt,
304	}
305};
306
307static int intel_pch_thermal_probe(struct pci_dev *pdev,
308				   const struct pci_device_id *id)
309{
310	enum board_ids board_id = id->driver_data;
311	const struct board_info *bi = &board_info[board_id];
312	struct pch_thermal_device *ptd;
313	int err;
314	int nr_trips;
315
316	ptd = devm_kzalloc(&pdev->dev, sizeof(*ptd), GFP_KERNEL);
317	if (!ptd)
318		return -ENOMEM;
319
320	ptd->ops = bi->ops;
321
322	pci_set_drvdata(pdev, ptd);
323	ptd->pdev = pdev;
324
325	err = pci_enable_device(pdev);
326	if (err) {
327		dev_err(&pdev->dev, "failed to enable pci device\n");
328		return err;
329	}
330
331	err = pci_request_regions(pdev, driver_name);
332	if (err) {
333		dev_err(&pdev->dev, "failed to request pci region\n");
334		goto error_disable;
335	}
336
337	ptd->hw_base = pci_ioremap_bar(pdev, 0);
338	if (!ptd->hw_base) {
339		err = -ENOMEM;
340		dev_err(&pdev->dev, "failed to map mem base\n");
341		goto error_release;
342	}
343
344	err = ptd->ops->hw_init(ptd, &nr_trips);
345	if (err)
346		goto error_cleanup;
347
348	ptd->tzd = thermal_zone_device_register(bi->name, nr_trips, 0, ptd,
349						&tzd_ops, NULL, 0, 0);
350	if (IS_ERR(ptd->tzd)) {
351		dev_err(&pdev->dev, "Failed to register thermal zone %s\n",
352			bi->name);
353		err = PTR_ERR(ptd->tzd);
354		goto error_cleanup;
355	}
356	err = thermal_zone_device_enable(ptd->tzd);
357	if (err)
358		goto err_unregister;
359
360	return 0;
361
362err_unregister:
363	thermal_zone_device_unregister(ptd->tzd);
364error_cleanup:
365	iounmap(ptd->hw_base);
366error_release:
367	pci_release_regions(pdev);
368error_disable:
369	pci_disable_device(pdev);
370	dev_err(&pdev->dev, "pci device failed to probe\n");
371	return err;
372}
373
374static void intel_pch_thermal_remove(struct pci_dev *pdev)
375{
376	struct pch_thermal_device *ptd = pci_get_drvdata(pdev);
377
378	thermal_zone_device_unregister(ptd->tzd);
379	iounmap(ptd->hw_base);
380	pci_set_drvdata(pdev, NULL);
381	pci_release_regions(pdev);
382	pci_disable_device(pdev);
383}
384
385static int intel_pch_thermal_suspend(struct device *device)
386{
387	struct pch_thermal_device *ptd = dev_get_drvdata(device);
388
389	return ptd->ops->suspend(ptd);
390}
391
392static int intel_pch_thermal_resume(struct device *device)
393{
394	struct pch_thermal_device *ptd = dev_get_drvdata(device);
395
396	return ptd->ops->resume(ptd);
397}
398
399static const struct pci_device_id intel_pch_thermal_id[] = {
400	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_1),
401		.driver_data = board_hsw, },
402	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_HSW_2),
403		.driver_data = board_hsw, },
404	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_WPT),
405		.driver_data = board_wpt, },
406	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL),
407		.driver_data = board_skl, },
408	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H),
409		.driver_data = board_skl, },
410	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL),
411		.driver_data = board_cnl, },
412	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H),
413		.driver_data = board_cnl, },
414	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_LP),
415		.driver_data = board_cnl, },
416	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CML_H),
417		.driver_data = board_cml, },
418	{ 0, },
419};
420MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
421
422static const struct dev_pm_ops intel_pch_pm_ops = {
423	.suspend = intel_pch_thermal_suspend,
424	.resume = intel_pch_thermal_resume,
425};
426
427static struct pci_driver intel_pch_thermal_driver = {
428	.name		= "intel_pch_thermal",
429	.id_table	= intel_pch_thermal_id,
430	.probe		= intel_pch_thermal_probe,
431	.remove		= intel_pch_thermal_remove,
432	.driver.pm	= &intel_pch_pm_ops,
433};
434
435module_pci_driver(intel_pch_thermal_driver);
436
437MODULE_LICENSE("GPL v2");
438MODULE_DESCRIPTION("Intel PCH Thermal driver");