Loading...
1/*
2 * max8952.c - Voltage and current regulation for the Maxim 8952
3 *
4 * Copyright (C) 2010 Samsung Electronics
5 * MyungJoo Ham <myungjoo.ham@samsung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/module.h>
23#include <linux/init.h>
24#include <linux/i2c.h>
25#include <linux/err.h>
26#include <linux/platform_device.h>
27#include <linux/regulator/driver.h>
28#include <linux/regulator/max8952.h>
29#include <linux/mutex.h>
30#include <linux/gpio.h>
31#include <linux/io.h>
32#include <linux/slab.h>
33
34/* Registers */
35enum {
36 MAX8952_REG_MODE0,
37 MAX8952_REG_MODE1,
38 MAX8952_REG_MODE2,
39 MAX8952_REG_MODE3,
40 MAX8952_REG_CONTROL,
41 MAX8952_REG_SYNC,
42 MAX8952_REG_RAMP,
43 MAX8952_REG_CHIP_ID1,
44 MAX8952_REG_CHIP_ID2,
45};
46
47struct max8952_data {
48 struct i2c_client *client;
49 struct device *dev;
50 struct mutex mutex;
51 struct max8952_platform_data *pdata;
52 struct regulator_dev *rdev;
53
54 bool vid0;
55 bool vid1;
56 bool en;
57};
58
59static int max8952_read_reg(struct max8952_data *max8952, u8 reg)
60{
61 int ret = i2c_smbus_read_byte_data(max8952->client, reg);
62 if (ret > 0)
63 ret &= 0xff;
64
65 return ret;
66}
67
68static int max8952_write_reg(struct max8952_data *max8952,
69 u8 reg, u8 value)
70{
71 return i2c_smbus_write_byte_data(max8952->client, reg, value);
72}
73
74static int max8952_voltage(struct max8952_data *max8952, u8 mode)
75{
76 return (max8952->pdata->dvs_mode[mode] * 10 + 770) * 1000;
77}
78
79static int max8952_list_voltage(struct regulator_dev *rdev,
80 unsigned int selector)
81{
82 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
83
84 if (rdev_get_id(rdev) != 0)
85 return -EINVAL;
86
87 return max8952_voltage(max8952, selector);
88}
89
90static int max8952_is_enabled(struct regulator_dev *rdev)
91{
92 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
93 return max8952->en;
94}
95
96static int max8952_enable(struct regulator_dev *rdev)
97{
98 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
99
100 /* If not valid, assume "ALWAYS_HIGH" */
101 if (gpio_is_valid(max8952->pdata->gpio_en))
102 gpio_set_value(max8952->pdata->gpio_en, 1);
103
104 max8952->en = true;
105 return 0;
106}
107
108static int max8952_disable(struct regulator_dev *rdev)
109{
110 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
111
112 /* If not valid, assume "ALWAYS_HIGH" -> not permitted */
113 if (gpio_is_valid(max8952->pdata->gpio_en))
114 gpio_set_value(max8952->pdata->gpio_en, 0);
115 else
116 return -EPERM;
117
118 max8952->en = false;
119 return 0;
120}
121
122static int max8952_get_voltage(struct regulator_dev *rdev)
123{
124 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
125 u8 vid = 0;
126
127 if (max8952->vid0)
128 vid += 1;
129 if (max8952->vid1)
130 vid += 2;
131
132 return max8952_voltage(max8952, vid);
133}
134
135static int max8952_set_voltage(struct regulator_dev *rdev,
136 int min_uV, int max_uV, unsigned *selector)
137{
138 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
139 s8 vid = -1, i;
140
141 if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
142 !gpio_is_valid(max8952->pdata->gpio_vid1)) {
143 /* DVS not supported */
144 return -EPERM;
145 }
146
147 for (i = 0; i < MAX8952_NUM_DVS_MODE; i++) {
148 int volt = max8952_voltage(max8952, i);
149
150 /* Set the voltage as low as possible within the range */
151 if (volt <= max_uV && volt >= min_uV)
152 if (vid == -1 || max8952_voltage(max8952, vid) > volt)
153 vid = i;
154 }
155
156 if (vid >= 0 && vid < MAX8952_NUM_DVS_MODE) {
157 max8952->vid0 = (vid % 2 == 1);
158 max8952->vid1 = (((vid >> 1) % 2) == 1);
159 *selector = vid;
160 gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0);
161 gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1);
162 } else
163 return -EINVAL;
164
165 return 0;
166}
167
168static struct regulator_ops max8952_ops = {
169 .list_voltage = max8952_list_voltage,
170 .is_enabled = max8952_is_enabled,
171 .enable = max8952_enable,
172 .disable = max8952_disable,
173 .get_voltage = max8952_get_voltage,
174 .set_voltage = max8952_set_voltage,
175 .set_suspend_disable = max8952_disable,
176};
177
178static struct regulator_desc regulator = {
179 .name = "MAX8952_VOUT",
180 .id = 0,
181 .n_voltages = MAX8952_NUM_DVS_MODE,
182 .ops = &max8952_ops,
183 .type = REGULATOR_VOLTAGE,
184 .owner = THIS_MODULE,
185};
186
187static int __devinit max8952_pmic_probe(struct i2c_client *client,
188 const struct i2c_device_id *i2c_id)
189{
190 struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
191 struct max8952_platform_data *pdata = client->dev.platform_data;
192 struct max8952_data *max8952;
193
194 int ret = 0, err = 0;
195
196 if (!pdata) {
197 dev_err(&client->dev, "Require the platform data\n");
198 return -EINVAL;
199 }
200
201 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
202 return -EIO;
203
204 max8952 = kzalloc(sizeof(struct max8952_data), GFP_KERNEL);
205 if (!max8952)
206 return -ENOMEM;
207
208 max8952->client = client;
209 max8952->dev = &client->dev;
210 max8952->pdata = pdata;
211 mutex_init(&max8952->mutex);
212
213 max8952->rdev = regulator_register(®ulator, max8952->dev,
214 &pdata->reg_data, max8952);
215
216 if (IS_ERR(max8952->rdev)) {
217 ret = PTR_ERR(max8952->rdev);
218 dev_err(max8952->dev, "regulator init failed (%d)\n", ret);
219 goto err_reg;
220 }
221
222 max8952->en = !!(pdata->reg_data.constraints.boot_on);
223 max8952->vid0 = (pdata->default_mode % 2) == 1;
224 max8952->vid1 = ((pdata->default_mode >> 1) % 2) == 1;
225
226 if (gpio_is_valid(pdata->gpio_en)) {
227 if (!gpio_request(pdata->gpio_en, "MAX8952 EN"))
228 gpio_direction_output(pdata->gpio_en, max8952->en);
229 else
230 err = 1;
231 } else
232 err = 2;
233
234 if (err) {
235 dev_info(max8952->dev, "EN gpio invalid: assume that EN"
236 "is always High\n");
237 max8952->en = 1;
238 pdata->gpio_en = -1; /* Mark invalid */
239 }
240
241 err = 0;
242
243 if (gpio_is_valid(pdata->gpio_vid0) &&
244 gpio_is_valid(pdata->gpio_vid1)) {
245 if (!gpio_request(pdata->gpio_vid0, "MAX8952 VID0"))
246 gpio_direction_output(pdata->gpio_vid0,
247 (pdata->default_mode) % 2);
248 else
249 err = 1;
250
251 if (!gpio_request(pdata->gpio_vid1, "MAX8952 VID1"))
252 gpio_direction_output(pdata->gpio_vid1,
253 (pdata->default_mode >> 1) % 2);
254 else {
255 if (!err)
256 gpio_free(pdata->gpio_vid0);
257 err = 2;
258 }
259
260 } else
261 err = 3;
262
263 if (err) {
264 dev_warn(max8952->dev, "VID0/1 gpio invalid: "
265 "DVS not available.\n");
266 max8952->vid0 = 0;
267 max8952->vid1 = 0;
268 /* Mark invalid */
269 pdata->gpio_vid0 = -1;
270 pdata->gpio_vid1 = -1;
271
272 /* Disable Pulldown of EN only */
273 max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);
274
275 dev_err(max8952->dev, "DVS modes disabled because VID0 and VID1"
276 " do not have proper controls.\n");
277 } else {
278 /*
279 * Disable Pulldown on EN, VID0, VID1 to reduce
280 * leakage current of MAX8952 assuming that MAX8952
281 * is turned on (EN==1). Note that without having VID0/1
282 * properly connected, turning pulldown off can be
283 * problematic. Thus, turn this off only when they are
284 * controllable by GPIO.
285 */
286 max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0);
287 }
288
289 max8952_write_reg(max8952, MAX8952_REG_MODE0,
290 (max8952_read_reg(max8952,
291 MAX8952_REG_MODE0) & 0xC0) |
292 (pdata->dvs_mode[0] & 0x3F));
293 max8952_write_reg(max8952, MAX8952_REG_MODE1,
294 (max8952_read_reg(max8952,
295 MAX8952_REG_MODE1) & 0xC0) |
296 (pdata->dvs_mode[1] & 0x3F));
297 max8952_write_reg(max8952, MAX8952_REG_MODE2,
298 (max8952_read_reg(max8952,
299 MAX8952_REG_MODE2) & 0xC0) |
300 (pdata->dvs_mode[2] & 0x3F));
301 max8952_write_reg(max8952, MAX8952_REG_MODE3,
302 (max8952_read_reg(max8952,
303 MAX8952_REG_MODE3) & 0xC0) |
304 (pdata->dvs_mode[3] & 0x3F));
305
306 max8952_write_reg(max8952, MAX8952_REG_SYNC,
307 (max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) |
308 ((pdata->sync_freq & 0x3) << 6));
309 max8952_write_reg(max8952, MAX8952_REG_RAMP,
310 (max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) |
311 ((pdata->ramp_speed & 0x7) << 5));
312
313 i2c_set_clientdata(client, max8952);
314
315 return 0;
316
317err_reg:
318 kfree(max8952);
319 return ret;
320}
321
322static int __devexit max8952_pmic_remove(struct i2c_client *client)
323{
324 struct max8952_data *max8952 = i2c_get_clientdata(client);
325 struct max8952_platform_data *pdata = max8952->pdata;
326 struct regulator_dev *rdev = max8952->rdev;
327
328 regulator_unregister(rdev);
329
330 gpio_free(pdata->gpio_vid0);
331 gpio_free(pdata->gpio_vid1);
332 gpio_free(pdata->gpio_en);
333
334 kfree(max8952);
335 return 0;
336}
337
338static const struct i2c_device_id max8952_ids[] = {
339 { "max8952", 0 },
340 { },
341};
342MODULE_DEVICE_TABLE(i2c, max8952_ids);
343
344static struct i2c_driver max8952_pmic_driver = {
345 .probe = max8952_pmic_probe,
346 .remove = __devexit_p(max8952_pmic_remove),
347 .driver = {
348 .name = "max8952",
349 },
350 .id_table = max8952_ids,
351};
352
353static int __init max8952_pmic_init(void)
354{
355 return i2c_add_driver(&max8952_pmic_driver);
356}
357subsys_initcall(max8952_pmic_init);
358
359static void __exit max8952_pmic_exit(void)
360{
361 i2c_del_driver(&max8952_pmic_driver);
362}
363module_exit(max8952_pmic_exit);
364
365MODULE_DESCRIPTION("MAXIM 8952 voltage regulator driver");
366MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
367MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * max8952.c - Voltage and current regulation for the Maxim 8952
4 *
5 * Copyright (C) 2010 Samsung Electronics
6 * MyungJoo Ham <myungjoo.ham@samsung.com>
7 */
8
9#include <linux/module.h>
10#include <linux/init.h>
11#include <linux/i2c.h>
12#include <linux/err.h>
13#include <linux/platform_device.h>
14#include <linux/regulator/driver.h>
15#include <linux/regulator/max8952.h>
16#include <linux/gpio/consumer.h>
17#include <linux/io.h>
18#include <linux/of.h>
19#include <linux/regulator/of_regulator.h>
20#include <linux/slab.h>
21
22/* Registers */
23enum {
24 MAX8952_REG_MODE0,
25 MAX8952_REG_MODE1,
26 MAX8952_REG_MODE2,
27 MAX8952_REG_MODE3,
28 MAX8952_REG_CONTROL,
29 MAX8952_REG_SYNC,
30 MAX8952_REG_RAMP,
31 MAX8952_REG_CHIP_ID1,
32 MAX8952_REG_CHIP_ID2,
33};
34
35struct max8952_data {
36 struct i2c_client *client;
37 struct max8952_platform_data *pdata;
38 struct gpio_desc *vid0_gpiod;
39 struct gpio_desc *vid1_gpiod;
40 bool vid0;
41 bool vid1;
42};
43
44static int max8952_read_reg(struct max8952_data *max8952, u8 reg)
45{
46 int ret = i2c_smbus_read_byte_data(max8952->client, reg);
47
48 if (ret > 0)
49 ret &= 0xff;
50
51 return ret;
52}
53
54static int max8952_write_reg(struct max8952_data *max8952,
55 u8 reg, u8 value)
56{
57 return i2c_smbus_write_byte_data(max8952->client, reg, value);
58}
59
60static int max8952_list_voltage(struct regulator_dev *rdev,
61 unsigned int selector)
62{
63 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
64
65 if (rdev_get_id(rdev) != 0)
66 return -EINVAL;
67
68 return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000;
69}
70
71static int max8952_get_voltage_sel(struct regulator_dev *rdev)
72{
73 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
74 u8 vid = 0;
75
76 if (max8952->vid0)
77 vid += 1;
78 if (max8952->vid1)
79 vid += 2;
80
81 return vid;
82}
83
84static int max8952_set_voltage_sel(struct regulator_dev *rdev,
85 unsigned selector)
86{
87 struct max8952_data *max8952 = rdev_get_drvdata(rdev);
88
89 if (!max8952->vid0_gpiod || !max8952->vid1_gpiod) {
90 /* DVS not supported */
91 return -EPERM;
92 }
93
94 max8952->vid0 = selector & 0x1;
95 max8952->vid1 = (selector >> 1) & 0x1;
96 gpiod_set_value(max8952->vid0_gpiod, max8952->vid0);
97 gpiod_set_value(max8952->vid1_gpiod, max8952->vid1);
98
99 return 0;
100}
101
102static const struct regulator_ops max8952_ops = {
103 .list_voltage = max8952_list_voltage,
104 .get_voltage_sel = max8952_get_voltage_sel,
105 .set_voltage_sel = max8952_set_voltage_sel,
106};
107
108static const struct regulator_desc regulator = {
109 .name = "MAX8952_VOUT",
110 .id = 0,
111 .n_voltages = MAX8952_NUM_DVS_MODE,
112 .ops = &max8952_ops,
113 .type = REGULATOR_VOLTAGE,
114 .owner = THIS_MODULE,
115};
116
117#ifdef CONFIG_OF
118static const struct of_device_id max8952_dt_match[] = {
119 { .compatible = "maxim,max8952" },
120 {},
121};
122MODULE_DEVICE_TABLE(of, max8952_dt_match);
123
124static struct max8952_platform_data *max8952_parse_dt(struct device *dev)
125{
126 struct max8952_platform_data *pd;
127 struct device_node *np = dev->of_node;
128 int ret;
129 int i;
130
131 pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
132 if (!pd)
133 return NULL;
134
135 if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode))
136 dev_warn(dev, "Default mode not specified, assuming 0\n");
137
138 ret = of_property_read_u32_array(np, "max8952,dvs-mode-microvolt",
139 pd->dvs_mode, ARRAY_SIZE(pd->dvs_mode));
140 if (ret) {
141 dev_err(dev, "max8952,dvs-mode-microvolt property not specified");
142 return NULL;
143 }
144
145 for (i = 0; i < ARRAY_SIZE(pd->dvs_mode); ++i) {
146 if (pd->dvs_mode[i] < 770000 || pd->dvs_mode[i] > 1400000) {
147 dev_err(dev, "DVS voltage %d out of range\n", i);
148 return NULL;
149 }
150 pd->dvs_mode[i] = (pd->dvs_mode[i] - 770000) / 10000;
151 }
152
153 if (of_property_read_u32(np, "max8952,sync-freq", &pd->sync_freq))
154 dev_warn(dev, "max8952,sync-freq property not specified, defaulting to 26MHz\n");
155
156 if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed))
157 dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n");
158
159 pd->reg_data = of_get_regulator_init_data(dev, np, ®ulator);
160 if (!pd->reg_data) {
161 dev_err(dev, "Failed to parse regulator init data\n");
162 return NULL;
163 }
164
165 return pd;
166}
167#else
168static struct max8952_platform_data *max8952_parse_dt(struct device *dev)
169{
170 return NULL;
171}
172#endif
173
174static int max8952_pmic_probe(struct i2c_client *client,
175 const struct i2c_device_id *i2c_id)
176{
177 struct i2c_adapter *adapter = client->adapter;
178 struct max8952_platform_data *pdata = dev_get_platdata(&client->dev);
179 struct regulator_config config = { };
180 struct max8952_data *max8952;
181 struct regulator_dev *rdev;
182 struct gpio_desc *gpiod;
183 enum gpiod_flags gflags;
184
185 int ret = 0;
186
187 if (client->dev.of_node)
188 pdata = max8952_parse_dt(&client->dev);
189
190 if (!pdata) {
191 dev_err(&client->dev, "Require the platform data\n");
192 return -EINVAL;
193 }
194
195 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
196 return -EIO;
197
198 max8952 = devm_kzalloc(&client->dev, sizeof(struct max8952_data),
199 GFP_KERNEL);
200 if (!max8952)
201 return -ENOMEM;
202
203 max8952->client = client;
204 max8952->pdata = pdata;
205
206 config.dev = &client->dev;
207 config.init_data = pdata->reg_data;
208 config.driver_data = max8952;
209 config.of_node = client->dev.of_node;
210
211 if (pdata->reg_data->constraints.boot_on)
212 gflags = GPIOD_OUT_HIGH;
213 else
214 gflags = GPIOD_OUT_LOW;
215 gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
216 /*
217 * Do not use devm* here: the regulator core takes over the
218 * lifecycle management of the GPIO descriptor.
219 */
220 gpiod = gpiod_get_optional(&client->dev,
221 "max8952,en",
222 gflags);
223 if (IS_ERR(gpiod))
224 return PTR_ERR(gpiod);
225 if (gpiod)
226 config.ena_gpiod = gpiod;
227
228 rdev = devm_regulator_register(&client->dev, ®ulator, &config);
229 if (IS_ERR(rdev)) {
230 ret = PTR_ERR(rdev);
231 dev_err(&client->dev, "regulator init failed (%d)\n", ret);
232 return ret;
233 }
234
235 max8952->vid0 = pdata->default_mode & 0x1;
236 max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
237
238 /* Fetch vid0 and vid1 GPIOs if available */
239 gflags = max8952->vid0 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
240 max8952->vid0_gpiod = devm_gpiod_get_index_optional(&client->dev,
241 "max8952,vid",
242 0, gflags);
243 if (IS_ERR(max8952->vid0_gpiod))
244 return PTR_ERR(max8952->vid0_gpiod);
245 gflags = max8952->vid1 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
246 max8952->vid1_gpiod = devm_gpiod_get_index_optional(&client->dev,
247 "max8952,vid",
248 1, gflags);
249 if (IS_ERR(max8952->vid1_gpiod))
250 return PTR_ERR(max8952->vid1_gpiod);
251
252 /* If either VID GPIO is missing just disable this */
253 if (!max8952->vid0_gpiod || !max8952->vid1_gpiod) {
254 dev_warn(&client->dev, "VID0/1 gpio invalid: "
255 "DVS not available.\n");
256 max8952->vid0 = 0;
257 max8952->vid1 = 0;
258 /* Make sure if we have any descriptors they get set to low */
259 if (max8952->vid0_gpiod)
260 gpiod_set_value(max8952->vid0_gpiod, 0);
261 if (max8952->vid1_gpiod)
262 gpiod_set_value(max8952->vid1_gpiod, 0);
263
264 /* Disable Pulldown of EN only */
265 max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);
266
267 dev_err(&client->dev, "DVS modes disabled because VID0 and VID1"
268 " do not have proper controls.\n");
269 } else {
270 /*
271 * Disable Pulldown on EN, VID0, VID1 to reduce
272 * leakage current of MAX8952 assuming that MAX8952
273 * is turned on (EN==1). Note that without having VID0/1
274 * properly connected, turning pulldown off can be
275 * problematic. Thus, turn this off only when they are
276 * controllable by GPIO.
277 */
278 max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0);
279 }
280
281 max8952_write_reg(max8952, MAX8952_REG_MODE0,
282 (max8952_read_reg(max8952,
283 MAX8952_REG_MODE0) & 0xC0) |
284 (pdata->dvs_mode[0] & 0x3F));
285 max8952_write_reg(max8952, MAX8952_REG_MODE1,
286 (max8952_read_reg(max8952,
287 MAX8952_REG_MODE1) & 0xC0) |
288 (pdata->dvs_mode[1] & 0x3F));
289 max8952_write_reg(max8952, MAX8952_REG_MODE2,
290 (max8952_read_reg(max8952,
291 MAX8952_REG_MODE2) & 0xC0) |
292 (pdata->dvs_mode[2] & 0x3F));
293 max8952_write_reg(max8952, MAX8952_REG_MODE3,
294 (max8952_read_reg(max8952,
295 MAX8952_REG_MODE3) & 0xC0) |
296 (pdata->dvs_mode[3] & 0x3F));
297
298 max8952_write_reg(max8952, MAX8952_REG_SYNC,
299 (max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) |
300 ((pdata->sync_freq & 0x3) << 6));
301 max8952_write_reg(max8952, MAX8952_REG_RAMP,
302 (max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) |
303 ((pdata->ramp_speed & 0x7) << 5));
304
305 i2c_set_clientdata(client, max8952);
306
307 return 0;
308}
309
310static const struct i2c_device_id max8952_ids[] = {
311 { "max8952", 0 },
312 { },
313};
314MODULE_DEVICE_TABLE(i2c, max8952_ids);
315
316static struct i2c_driver max8952_pmic_driver = {
317 .probe = max8952_pmic_probe,
318 .driver = {
319 .name = "max8952",
320 .of_match_table = of_match_ptr(max8952_dt_match),
321 },
322 .id_table = max8952_ids,
323};
324
325static int __init max8952_pmic_init(void)
326{
327 return i2c_add_driver(&max8952_pmic_driver);
328}
329subsys_initcall(max8952_pmic_init);
330
331static void __exit max8952_pmic_exit(void)
332{
333 i2c_del_driver(&max8952_pmic_driver);
334}
335module_exit(max8952_pmic_exit);
336
337MODULE_DESCRIPTION("MAXIM 8952 voltage regulator driver");
338MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
339MODULE_LICENSE("GPL");