Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
   1/*
   2 * Copyright 2015-2017 Advanced Micro Devices, Inc.
   3 *
   4 * Permission is hereby granted, free of charge, to any person obtaining a
   5 * copy of this software and associated documentation files (the "Software"),
   6 * to deal in the Software without restriction, including without limitation
   7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8 * and/or sell copies of the Software, and to permit persons to whom the
   9 * Software is furnished to do so, subject to the following conditions:
  10 *
  11 * The above copyright notice and this permission notice shall be included in
  12 * all copies or substantial portions of the Software.
  13 *
  14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
  18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  20 * OTHER DEALINGS IN THE SOFTWARE.
  21 */
  22
  23#include <linux/pci.h>
  24#include <linux/acpi.h>
  25#include "kfd_crat.h"
  26#include "kfd_priv.h"
  27#include "kfd_topology.h"
  28#include "kfd_iommu.h"
  29#include "amdgpu_amdkfd.h"
  30
  31/* GPU Processor ID base for dGPUs for which VCRAT needs to be created.
  32 * GPU processor ID are expressed with Bit[31]=1.
  33 * The base is set to 0x8000_0000 + 0x1000 to avoid collision with GPU IDs
  34 * used in the CRAT.
  35 */
  36static uint32_t gpu_processor_id_low = 0x80001000;
  37
  38/* Return the next available gpu_processor_id and increment it for next GPU
  39 *	@total_cu_count - Total CUs present in the GPU including ones
  40 *			  masked off
  41 */
  42static inline unsigned int get_and_inc_gpu_processor_id(
  43				unsigned int total_cu_count)
  44{
  45	int current_id = gpu_processor_id_low;
  46
  47	gpu_processor_id_low += total_cu_count;
  48	return current_id;
  49}
  50
  51/* Static table to describe GPU Cache information */
  52struct kfd_gpu_cache_info {
  53	uint32_t	cache_size;
  54	uint32_t	cache_level;
  55	uint32_t	flags;
  56	/* Indicates how many Compute Units share this cache
  57	 * Value = 1 indicates the cache is not shared
  58	 */
  59	uint32_t	num_cu_shared;
  60};
  61
  62static struct kfd_gpu_cache_info kaveri_cache_info[] = {
  63	{
  64		/* TCP L1 Cache per CU */
  65		.cache_size = 16,
  66		.cache_level = 1,
  67		.flags = (CRAT_CACHE_FLAGS_ENABLED |
  68				CRAT_CACHE_FLAGS_DATA_CACHE |
  69				CRAT_CACHE_FLAGS_SIMD_CACHE),
  70		.num_cu_shared = 1,
  71
  72	},
  73	{
  74		/* Scalar L1 Instruction Cache (in SQC module) per bank */
  75		.cache_size = 16,
  76		.cache_level = 1,
  77		.flags = (CRAT_CACHE_FLAGS_ENABLED |
  78				CRAT_CACHE_FLAGS_INST_CACHE |
  79				CRAT_CACHE_FLAGS_SIMD_CACHE),
  80		.num_cu_shared = 2,
  81	},
  82	{
  83		/* Scalar L1 Data Cache (in SQC module) per bank */
  84		.cache_size = 8,
  85		.cache_level = 1,
  86		.flags = (CRAT_CACHE_FLAGS_ENABLED |
  87				CRAT_CACHE_FLAGS_DATA_CACHE |
  88				CRAT_CACHE_FLAGS_SIMD_CACHE),
  89		.num_cu_shared = 2,
  90	},
  91
  92	/* TODO: Add L2 Cache information */
  93};
  94
  95
  96static struct kfd_gpu_cache_info carrizo_cache_info[] = {
  97	{
  98		/* TCP L1 Cache per CU */
  99		.cache_size = 16,
 100		.cache_level = 1,
 101		.flags = (CRAT_CACHE_FLAGS_ENABLED |
 102				CRAT_CACHE_FLAGS_DATA_CACHE |
 103				CRAT_CACHE_FLAGS_SIMD_CACHE),
 104		.num_cu_shared = 1,
 105	},
 106	{
 107		/* Scalar L1 Instruction Cache (in SQC module) per bank */
 108		.cache_size = 8,
 109		.cache_level = 1,
 110		.flags = (CRAT_CACHE_FLAGS_ENABLED |
 111				CRAT_CACHE_FLAGS_INST_CACHE |
 112				CRAT_CACHE_FLAGS_SIMD_CACHE),
 113		.num_cu_shared = 4,
 114	},
 115	{
 116		/* Scalar L1 Data Cache (in SQC module) per bank. */
 117		.cache_size = 4,
 118		.cache_level = 1,
 119		.flags = (CRAT_CACHE_FLAGS_ENABLED |
 120				CRAT_CACHE_FLAGS_DATA_CACHE |
 121				CRAT_CACHE_FLAGS_SIMD_CACHE),
 122		.num_cu_shared = 4,
 123	},
 124
 125	/* TODO: Add L2 Cache information */
 126};
 127
 128/* NOTE: In future if more information is added to struct kfd_gpu_cache_info
 129 * the following ASICs may need a separate table.
 130 */
 131#define hawaii_cache_info kaveri_cache_info
 132#define tonga_cache_info carrizo_cache_info
 133#define fiji_cache_info  carrizo_cache_info
 134#define polaris10_cache_info carrizo_cache_info
 135#define polaris11_cache_info carrizo_cache_info
 136#define polaris12_cache_info carrizo_cache_info
 137#define vegam_cache_info carrizo_cache_info
 138/* TODO - check & update Vega10 cache details */
 139#define vega10_cache_info carrizo_cache_info
 140#define raven_cache_info carrizo_cache_info
 141#define renoir_cache_info carrizo_cache_info
 142/* TODO - check & update Navi10 cache details */
 143#define navi10_cache_info carrizo_cache_info
 144
 145static void kfd_populated_cu_info_cpu(struct kfd_topology_device *dev,
 146		struct crat_subtype_computeunit *cu)
 147{
 148	dev->node_props.cpu_cores_count = cu->num_cpu_cores;
 149	dev->node_props.cpu_core_id_base = cu->processor_id_low;
 150	if (cu->hsa_capability & CRAT_CU_FLAGS_IOMMU_PRESENT)
 151		dev->node_props.capability |= HSA_CAP_ATS_PRESENT;
 152
 153	pr_debug("CU CPU: cores=%d id_base=%d\n", cu->num_cpu_cores,
 154			cu->processor_id_low);
 155}
 156
 157static void kfd_populated_cu_info_gpu(struct kfd_topology_device *dev,
 158		struct crat_subtype_computeunit *cu)
 159{
 160	dev->node_props.simd_id_base = cu->processor_id_low;
 161	dev->node_props.simd_count = cu->num_simd_cores;
 162	dev->node_props.lds_size_in_kb = cu->lds_size_in_kb;
 163	dev->node_props.max_waves_per_simd = cu->max_waves_simd;
 164	dev->node_props.wave_front_size = cu->wave_front_size;
 165	dev->node_props.array_count = cu->array_count;
 166	dev->node_props.cu_per_simd_array = cu->num_cu_per_array;
 167	dev->node_props.simd_per_cu = cu->num_simd_per_cu;
 168	dev->node_props.max_slots_scratch_cu = cu->max_slots_scatch_cu;
 169	if (cu->hsa_capability & CRAT_CU_FLAGS_HOT_PLUGGABLE)
 170		dev->node_props.capability |= HSA_CAP_HOT_PLUGGABLE;
 171	pr_debug("CU GPU: id_base=%d\n", cu->processor_id_low);
 172}
 173
 174/* kfd_parse_subtype_cu - parse compute unit subtypes and attach it to correct
 175 * topology device present in the device_list
 176 */
 177static int kfd_parse_subtype_cu(struct crat_subtype_computeunit *cu,
 178				struct list_head *device_list)
 179{
 180	struct kfd_topology_device *dev;
 181
 182	pr_debug("Found CU entry in CRAT table with proximity_domain=%d caps=%x\n",
 183			cu->proximity_domain, cu->hsa_capability);
 184	list_for_each_entry(dev, device_list, list) {
 185		if (cu->proximity_domain == dev->proximity_domain) {
 186			if (cu->flags & CRAT_CU_FLAGS_CPU_PRESENT)
 187				kfd_populated_cu_info_cpu(dev, cu);
 188
 189			if (cu->flags & CRAT_CU_FLAGS_GPU_PRESENT)
 190				kfd_populated_cu_info_gpu(dev, cu);
 191			break;
 192		}
 193	}
 194
 195	return 0;
 196}
 197
 198static struct kfd_mem_properties *
 199find_subtype_mem(uint32_t heap_type, uint32_t flags, uint32_t width,
 200		struct kfd_topology_device *dev)
 201{
 202	struct kfd_mem_properties *props;
 203
 204	list_for_each_entry(props, &dev->mem_props, list) {
 205		if (props->heap_type == heap_type
 206				&& props->flags == flags
 207				&& props->width == width)
 208			return props;
 209	}
 210
 211	return NULL;
 212}
 213/* kfd_parse_subtype_mem - parse memory subtypes and attach it to correct
 214 * topology device present in the device_list
 215 */
 216static int kfd_parse_subtype_mem(struct crat_subtype_memory *mem,
 217				struct list_head *device_list)
 218{
 219	struct kfd_mem_properties *props;
 220	struct kfd_topology_device *dev;
 221	uint32_t heap_type;
 222	uint64_t size_in_bytes;
 223	uint32_t flags = 0;
 224	uint32_t width;
 225
 226	pr_debug("Found memory entry in CRAT table with proximity_domain=%d\n",
 227			mem->proximity_domain);
 228	list_for_each_entry(dev, device_list, list) {
 229		if (mem->proximity_domain == dev->proximity_domain) {
 230			/* We're on GPU node */
 231			if (dev->node_props.cpu_cores_count == 0) {
 232				/* APU */
 233				if (mem->visibility_type == 0)
 234					heap_type =
 235						HSA_MEM_HEAP_TYPE_FB_PRIVATE;
 236				/* dGPU */
 237				else
 238					heap_type = mem->visibility_type;
 239			} else
 240				heap_type = HSA_MEM_HEAP_TYPE_SYSTEM;
 241
 242			if (mem->flags & CRAT_MEM_FLAGS_HOT_PLUGGABLE)
 243				flags |= HSA_MEM_FLAGS_HOT_PLUGGABLE;
 244			if (mem->flags & CRAT_MEM_FLAGS_NON_VOLATILE)
 245				flags |= HSA_MEM_FLAGS_NON_VOLATILE;
 246
 247			size_in_bytes =
 248				((uint64_t)mem->length_high << 32) +
 249							mem->length_low;
 250			width = mem->width;
 251
 252			/* Multiple banks of the same type are aggregated into
 253			 * one. User mode doesn't care about multiple physical
 254			 * memory segments. It's managed as a single virtual
 255			 * heap for user mode.
 256			 */
 257			props = find_subtype_mem(heap_type, flags, width, dev);
 258			if (props) {
 259				props->size_in_bytes += size_in_bytes;
 260				break;
 261			}
 262
 263			props = kfd_alloc_struct(props);
 264			if (!props)
 265				return -ENOMEM;
 266
 267			props->heap_type = heap_type;
 268			props->flags = flags;
 269			props->size_in_bytes = size_in_bytes;
 270			props->width = width;
 271
 272			dev->node_props.mem_banks_count++;
 273			list_add_tail(&props->list, &dev->mem_props);
 274
 275			break;
 276		}
 277	}
 278
 279	return 0;
 280}
 281
 282/* kfd_parse_subtype_cache - parse cache subtypes and attach it to correct
 283 * topology device present in the device_list
 284 */
 285static int kfd_parse_subtype_cache(struct crat_subtype_cache *cache,
 286			struct list_head *device_list)
 287{
 288	struct kfd_cache_properties *props;
 289	struct kfd_topology_device *dev;
 290	uint32_t id;
 291	uint32_t total_num_of_cu;
 292
 293	id = cache->processor_id_low;
 294
 295	pr_debug("Found cache entry in CRAT table with processor_id=%d\n", id);
 296	list_for_each_entry(dev, device_list, list) {
 297		total_num_of_cu = (dev->node_props.array_count *
 298					dev->node_props.cu_per_simd_array);
 299
 300		/* Cache infomration in CRAT doesn't have proximity_domain
 301		 * information as it is associated with a CPU core or GPU
 302		 * Compute Unit. So map the cache using CPU core Id or SIMD
 303		 * (GPU) ID.
 304		 * TODO: This works because currently we can safely assume that
 305		 *  Compute Units are parsed before caches are parsed. In
 306		 *  future, remove this dependency
 307		 */
 308		if ((id >= dev->node_props.cpu_core_id_base &&
 309			id <= dev->node_props.cpu_core_id_base +
 310				dev->node_props.cpu_cores_count) ||
 311			(id >= dev->node_props.simd_id_base &&
 312			id < dev->node_props.simd_id_base +
 313				total_num_of_cu)) {
 314			props = kfd_alloc_struct(props);
 315			if (!props)
 316				return -ENOMEM;
 317
 318			props->processor_id_low = id;
 319			props->cache_level = cache->cache_level;
 320			props->cache_size = cache->cache_size;
 321			props->cacheline_size = cache->cache_line_size;
 322			props->cachelines_per_tag = cache->lines_per_tag;
 323			props->cache_assoc = cache->associativity;
 324			props->cache_latency = cache->cache_latency;
 325			memcpy(props->sibling_map, cache->sibling_map,
 326					sizeof(props->sibling_map));
 327
 328			if (cache->flags & CRAT_CACHE_FLAGS_DATA_CACHE)
 329				props->cache_type |= HSA_CACHE_TYPE_DATA;
 330			if (cache->flags & CRAT_CACHE_FLAGS_INST_CACHE)
 331				props->cache_type |= HSA_CACHE_TYPE_INSTRUCTION;
 332			if (cache->flags & CRAT_CACHE_FLAGS_CPU_CACHE)
 333				props->cache_type |= HSA_CACHE_TYPE_CPU;
 334			if (cache->flags & CRAT_CACHE_FLAGS_SIMD_CACHE)
 335				props->cache_type |= HSA_CACHE_TYPE_HSACU;
 336
 337			dev->cache_count++;
 338			dev->node_props.caches_count++;
 339			list_add_tail(&props->list, &dev->cache_props);
 340
 341			break;
 342		}
 343	}
 344
 345	return 0;
 346}
 347
 348/* kfd_parse_subtype_iolink - parse iolink subtypes and attach it to correct
 349 * topology device present in the device_list
 350 */
 351static int kfd_parse_subtype_iolink(struct crat_subtype_iolink *iolink,
 352					struct list_head *device_list)
 353{
 354	struct kfd_iolink_properties *props = NULL, *props2;
 355	struct kfd_topology_device *dev, *to_dev;
 356	uint32_t id_from;
 357	uint32_t id_to;
 358
 359	id_from = iolink->proximity_domain_from;
 360	id_to = iolink->proximity_domain_to;
 361
 362	pr_debug("Found IO link entry in CRAT table with id_from=%d, id_to %d\n",
 363			id_from, id_to);
 364	list_for_each_entry(dev, device_list, list) {
 365		if (id_from == dev->proximity_domain) {
 366			props = kfd_alloc_struct(props);
 367			if (!props)
 368				return -ENOMEM;
 369
 370			props->node_from = id_from;
 371			props->node_to = id_to;
 372			props->ver_maj = iolink->version_major;
 373			props->ver_min = iolink->version_minor;
 374			props->iolink_type = iolink->io_interface_type;
 375
 376			if (props->iolink_type == CRAT_IOLINK_TYPE_PCIEXPRESS)
 377				props->weight = 20;
 378			else if (props->iolink_type == CRAT_IOLINK_TYPE_XGMI)
 379				props->weight = 15 * iolink->num_hops_xgmi;
 380			else
 381				props->weight = node_distance(id_from, id_to);
 382
 383			props->min_latency = iolink->minimum_latency;
 384			props->max_latency = iolink->maximum_latency;
 385			props->min_bandwidth = iolink->minimum_bandwidth_mbs;
 386			props->max_bandwidth = iolink->maximum_bandwidth_mbs;
 387			props->rec_transfer_size =
 388					iolink->recommended_transfer_size;
 389
 390			dev->io_link_count++;
 391			dev->node_props.io_links_count++;
 392			list_add_tail(&props->list, &dev->io_link_props);
 393			break;
 394		}
 395	}
 396
 397	/* CPU topology is created before GPUs are detected, so CPU->GPU
 398	 * links are not built at that time. If a PCIe type is discovered, it
 399	 * means a GPU is detected and we are adding GPU->CPU to the topology.
 400	 * At this time, also add the corresponded CPU->GPU link if GPU
 401	 * is large bar.
 402	 * For xGMI, we only added the link with one direction in the crat
 403	 * table, add corresponded reversed direction link now.
 404	 */
 405	if (props && (iolink->flags & CRAT_IOLINK_FLAGS_BI_DIRECTIONAL)) {
 406		to_dev = kfd_topology_device_by_proximity_domain(id_to);
 407		if (!to_dev)
 408			return -ENODEV;
 409		/* same everything but the other direction */
 410		props2 = kmemdup(props, sizeof(*props2), GFP_KERNEL);
 411		props2->node_from = id_to;
 412		props2->node_to = id_from;
 413		props2->kobj = NULL;
 414		to_dev->io_link_count++;
 415		to_dev->node_props.io_links_count++;
 416		list_add_tail(&props2->list, &to_dev->io_link_props);
 417	}
 418
 419	return 0;
 420}
 421
 422/* kfd_parse_subtype - parse subtypes and attach it to correct topology device
 423 * present in the device_list
 424 *	@sub_type_hdr - subtype section of crat_image
 425 *	@device_list - list of topology devices present in this crat_image
 426 */
 427static int kfd_parse_subtype(struct crat_subtype_generic *sub_type_hdr,
 428				struct list_head *device_list)
 429{
 430	struct crat_subtype_computeunit *cu;
 431	struct crat_subtype_memory *mem;
 432	struct crat_subtype_cache *cache;
 433	struct crat_subtype_iolink *iolink;
 434	int ret = 0;
 435
 436	switch (sub_type_hdr->type) {
 437	case CRAT_SUBTYPE_COMPUTEUNIT_AFFINITY:
 438		cu = (struct crat_subtype_computeunit *)sub_type_hdr;
 439		ret = kfd_parse_subtype_cu(cu, device_list);
 440		break;
 441	case CRAT_SUBTYPE_MEMORY_AFFINITY:
 442		mem = (struct crat_subtype_memory *)sub_type_hdr;
 443		ret = kfd_parse_subtype_mem(mem, device_list);
 444		break;
 445	case CRAT_SUBTYPE_CACHE_AFFINITY:
 446		cache = (struct crat_subtype_cache *)sub_type_hdr;
 447		ret = kfd_parse_subtype_cache(cache, device_list);
 448		break;
 449	case CRAT_SUBTYPE_TLB_AFFINITY:
 450		/*
 451		 * For now, nothing to do here
 452		 */
 453		pr_debug("Found TLB entry in CRAT table (not processing)\n");
 454		break;
 455	case CRAT_SUBTYPE_CCOMPUTE_AFFINITY:
 456		/*
 457		 * For now, nothing to do here
 458		 */
 459		pr_debug("Found CCOMPUTE entry in CRAT table (not processing)\n");
 460		break;
 461	case CRAT_SUBTYPE_IOLINK_AFFINITY:
 462		iolink = (struct crat_subtype_iolink *)sub_type_hdr;
 463		ret = kfd_parse_subtype_iolink(iolink, device_list);
 464		break;
 465	default:
 466		pr_warn("Unknown subtype %d in CRAT\n",
 467				sub_type_hdr->type);
 468	}
 469
 470	return ret;
 471}
 472
 473/* kfd_parse_crat_table - parse CRAT table. For each node present in CRAT
 474 * create a kfd_topology_device and add in to device_list. Also parse
 475 * CRAT subtypes and attach it to appropriate kfd_topology_device
 476 *	@crat_image - input image containing CRAT
 477 *	@device_list - [OUT] list of kfd_topology_device generated after
 478 *		       parsing crat_image
 479 *	@proximity_domain - Proximity domain of the first device in the table
 480 *
 481 *	Return - 0 if successful else -ve value
 482 */
 483int kfd_parse_crat_table(void *crat_image, struct list_head *device_list,
 484			 uint32_t proximity_domain)
 485{
 486	struct kfd_topology_device *top_dev = NULL;
 487	struct crat_subtype_generic *sub_type_hdr;
 488	uint16_t node_id;
 489	int ret = 0;
 490	struct crat_header *crat_table = (struct crat_header *)crat_image;
 491	uint16_t num_nodes;
 492	uint32_t image_len;
 493
 494	if (!crat_image)
 495		return -EINVAL;
 496
 497	if (!list_empty(device_list)) {
 498		pr_warn("Error device list should be empty\n");
 499		return -EINVAL;
 500	}
 501
 502	num_nodes = crat_table->num_domains;
 503	image_len = crat_table->length;
 504
 505	pr_debug("Parsing CRAT table with %d nodes\n", num_nodes);
 506
 507	for (node_id = 0; node_id < num_nodes; node_id++) {
 508		top_dev = kfd_create_topology_device(device_list);
 509		if (!top_dev)
 510			break;
 511		top_dev->proximity_domain = proximity_domain++;
 512	}
 513
 514	if (!top_dev) {
 515		ret = -ENOMEM;
 516		goto err;
 517	}
 518
 519	memcpy(top_dev->oem_id, crat_table->oem_id, CRAT_OEMID_LENGTH);
 520	memcpy(top_dev->oem_table_id, crat_table->oem_table_id,
 521			CRAT_OEMTABLEID_LENGTH);
 522	top_dev->oem_revision = crat_table->oem_revision;
 523
 524	sub_type_hdr = (struct crat_subtype_generic *)(crat_table+1);
 525	while ((char *)sub_type_hdr + sizeof(struct crat_subtype_generic) <
 526			((char *)crat_image) + image_len) {
 527		if (sub_type_hdr->flags & CRAT_SUBTYPE_FLAGS_ENABLED) {
 528			ret = kfd_parse_subtype(sub_type_hdr, device_list);
 529			if (ret)
 530				break;
 531		}
 532
 533		sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
 534				sub_type_hdr->length);
 535	}
 536
 537err:
 538	if (ret)
 539		kfd_release_topology_device_list(device_list);
 540
 541	return ret;
 542}
 543
 544/* Helper function. See kfd_fill_gpu_cache_info for parameter description */
 545static int fill_in_pcache(struct crat_subtype_cache *pcache,
 546				struct kfd_gpu_cache_info *pcache_info,
 547				struct kfd_cu_info *cu_info,
 548				int mem_available,
 549				int cu_bitmask,
 550				int cache_type, unsigned int cu_processor_id,
 551				int cu_block)
 552{
 553	unsigned int cu_sibling_map_mask;
 554	int first_active_cu;
 555
 556	/* First check if enough memory is available */
 557	if (sizeof(struct crat_subtype_cache) > mem_available)
 558		return -ENOMEM;
 559
 560	cu_sibling_map_mask = cu_bitmask;
 561	cu_sibling_map_mask >>= cu_block;
 562	cu_sibling_map_mask &=
 563		((1 << pcache_info[cache_type].num_cu_shared) - 1);
 564	first_active_cu = ffs(cu_sibling_map_mask);
 565
 566	/* CU could be inactive. In case of shared cache find the first active
 567	 * CU. and incase of non-shared cache check if the CU is inactive. If
 568	 * inactive active skip it
 569	 */
 570	if (first_active_cu) {
 571		memset(pcache, 0, sizeof(struct crat_subtype_cache));
 572		pcache->type = CRAT_SUBTYPE_CACHE_AFFINITY;
 573		pcache->length = sizeof(struct crat_subtype_cache);
 574		pcache->flags = pcache_info[cache_type].flags;
 575		pcache->processor_id_low = cu_processor_id
 576					 + (first_active_cu - 1);
 577		pcache->cache_level = pcache_info[cache_type].cache_level;
 578		pcache->cache_size = pcache_info[cache_type].cache_size;
 579
 580		/* Sibling map is w.r.t processor_id_low, so shift out
 581		 * inactive CU
 582		 */
 583		cu_sibling_map_mask =
 584			cu_sibling_map_mask >> (first_active_cu - 1);
 585
 586		pcache->sibling_map[0] = (uint8_t)(cu_sibling_map_mask & 0xFF);
 587		pcache->sibling_map[1] =
 588				(uint8_t)((cu_sibling_map_mask >> 8) & 0xFF);
 589		pcache->sibling_map[2] =
 590				(uint8_t)((cu_sibling_map_mask >> 16) & 0xFF);
 591		pcache->sibling_map[3] =
 592				(uint8_t)((cu_sibling_map_mask >> 24) & 0xFF);
 593		return 0;
 594	}
 595	return 1;
 596}
 597
 598/* kfd_fill_gpu_cache_info - Fill GPU cache info using kfd_gpu_cache_info
 599 * tables
 600 *
 601 *	@kdev - [IN] GPU device
 602 *	@gpu_processor_id - [IN] GPU processor ID to which these caches
 603 *			    associate
 604 *	@available_size - [IN] Amount of memory available in pcache
 605 *	@cu_info - [IN] Compute Unit info obtained from KGD
 606 *	@pcache - [OUT] memory into which cache data is to be filled in.
 607 *	@size_filled - [OUT] amount of data used up in pcache.
 608 *	@num_of_entries - [OUT] number of caches added
 609 */
 610static int kfd_fill_gpu_cache_info(struct kfd_dev *kdev,
 611			int gpu_processor_id,
 612			int available_size,
 613			struct kfd_cu_info *cu_info,
 614			struct crat_subtype_cache *pcache,
 615			int *size_filled,
 616			int *num_of_entries)
 617{
 618	struct kfd_gpu_cache_info *pcache_info;
 619	int num_of_cache_types = 0;
 620	int i, j, k;
 621	int ct = 0;
 622	int mem_available = available_size;
 623	unsigned int cu_processor_id;
 624	int ret;
 625
 626	switch (kdev->device_info->asic_family) {
 627	case CHIP_KAVERI:
 628		pcache_info = kaveri_cache_info;
 629		num_of_cache_types = ARRAY_SIZE(kaveri_cache_info);
 630		break;
 631	case CHIP_HAWAII:
 632		pcache_info = hawaii_cache_info;
 633		num_of_cache_types = ARRAY_SIZE(hawaii_cache_info);
 634		break;
 635	case CHIP_CARRIZO:
 636		pcache_info = carrizo_cache_info;
 637		num_of_cache_types = ARRAY_SIZE(carrizo_cache_info);
 638		break;
 639	case CHIP_TONGA:
 640		pcache_info = tonga_cache_info;
 641		num_of_cache_types = ARRAY_SIZE(tonga_cache_info);
 642		break;
 643	case CHIP_FIJI:
 644		pcache_info = fiji_cache_info;
 645		num_of_cache_types = ARRAY_SIZE(fiji_cache_info);
 646		break;
 647	case CHIP_POLARIS10:
 648		pcache_info = polaris10_cache_info;
 649		num_of_cache_types = ARRAY_SIZE(polaris10_cache_info);
 650		break;
 651	case CHIP_POLARIS11:
 652		pcache_info = polaris11_cache_info;
 653		num_of_cache_types = ARRAY_SIZE(polaris11_cache_info);
 654		break;
 655	case CHIP_POLARIS12:
 656		pcache_info = polaris12_cache_info;
 657		num_of_cache_types = ARRAY_SIZE(polaris12_cache_info);
 658		break;
 659	case CHIP_VEGAM:
 660		pcache_info = vegam_cache_info;
 661		num_of_cache_types = ARRAY_SIZE(vegam_cache_info);
 662		break;
 663	case CHIP_VEGA10:
 664	case CHIP_VEGA12:
 665	case CHIP_VEGA20:
 666	case CHIP_ARCTURUS:
 667		pcache_info = vega10_cache_info;
 668		num_of_cache_types = ARRAY_SIZE(vega10_cache_info);
 669		break;
 670	case CHIP_RAVEN:
 671		pcache_info = raven_cache_info;
 672		num_of_cache_types = ARRAY_SIZE(raven_cache_info);
 673		break;
 674	case CHIP_RENOIR:
 675		pcache_info = renoir_cache_info;
 676		num_of_cache_types = ARRAY_SIZE(renoir_cache_info);
 677		break;
 678	case CHIP_NAVI10:
 679	case CHIP_NAVI12:
 680	case CHIP_NAVI14:
 681	case CHIP_SIENNA_CICHLID:
 682	case CHIP_NAVY_FLOUNDER:
 683		pcache_info = navi10_cache_info;
 684		num_of_cache_types = ARRAY_SIZE(navi10_cache_info);
 685		break;
 686	default:
 687		return -EINVAL;
 688	}
 689
 690	*size_filled = 0;
 691	*num_of_entries = 0;
 692
 693	/* For each type of cache listed in the kfd_gpu_cache_info table,
 694	 * go through all available Compute Units.
 695	 * The [i,j,k] loop will
 696	 *		if kfd_gpu_cache_info.num_cu_shared = 1
 697	 *			will parse through all available CU
 698	 *		If (kfd_gpu_cache_info.num_cu_shared != 1)
 699	 *			then it will consider only one CU from
 700	 *			the shared unit
 701	 */
 702
 703	for (ct = 0; ct < num_of_cache_types; ct++) {
 704		cu_processor_id = gpu_processor_id;
 705		for (i = 0; i < cu_info->num_shader_engines; i++) {
 706			for (j = 0; j < cu_info->num_shader_arrays_per_engine;
 707				j++) {
 708				for (k = 0; k < cu_info->num_cu_per_sh;
 709					k += pcache_info[ct].num_cu_shared) {
 710
 711					ret = fill_in_pcache(pcache,
 712						pcache_info,
 713						cu_info,
 714						mem_available,
 715						cu_info->cu_bitmap[i % 4][j + i / 4],
 716						ct,
 717						cu_processor_id,
 718						k);
 719
 720					if (ret < 0)
 721						break;
 722
 723					if (!ret) {
 724						pcache++;
 725						(*num_of_entries)++;
 726						mem_available -=
 727							sizeof(*pcache);
 728						(*size_filled) +=
 729							sizeof(*pcache);
 730					}
 731
 732					/* Move to next CU block */
 733					cu_processor_id +=
 734						pcache_info[ct].num_cu_shared;
 735				}
 736			}
 737		}
 738	}
 739
 740	pr_debug("Added [%d] GPU cache entries\n", *num_of_entries);
 741
 742	return 0;
 743}
 744
 745/*
 746 * kfd_create_crat_image_acpi - Allocates memory for CRAT image and
 747 * copies CRAT from ACPI (if available).
 748 * NOTE: Call kfd_destroy_crat_image to free CRAT image memory
 749 *
 750 *	@crat_image: CRAT read from ACPI. If no CRAT in ACPI then
 751 *		     crat_image will be NULL
 752 *	@size: [OUT] size of crat_image
 753 *
 754 *	Return 0 if successful else return error code
 755 */
 756int kfd_create_crat_image_acpi(void **crat_image, size_t *size)
 757{
 758	struct acpi_table_header *crat_table;
 759	acpi_status status;
 760	void *pcrat_image;
 761
 762	if (!crat_image)
 763		return -EINVAL;
 764
 765	*crat_image = NULL;
 766
 767	/* Fetch the CRAT table from ACPI */
 768	status = acpi_get_table(CRAT_SIGNATURE, 0, &crat_table);
 769	if (status == AE_NOT_FOUND) {
 770		pr_warn("CRAT table not found\n");
 771		return -ENODATA;
 772	} else if (ACPI_FAILURE(status)) {
 773		const char *err = acpi_format_exception(status);
 774
 775		pr_err("CRAT table error: %s\n", err);
 776		return -EINVAL;
 777	}
 778
 779	if (ignore_crat) {
 780		pr_info("CRAT table disabled by module option\n");
 781		return -ENODATA;
 782	}
 783
 784	pcrat_image = kmemdup(crat_table, crat_table->length, GFP_KERNEL);
 785	if (!pcrat_image)
 786		return -ENOMEM;
 787
 788	*crat_image = pcrat_image;
 789	*size = crat_table->length;
 790
 791	return 0;
 792}
 793
 794/* Memory required to create Virtual CRAT.
 795 * Since there is no easy way to predict the amount of memory required, the
 796 * following amount are allocated for CPU and GPU Virtual CRAT. This is
 797 * expected to cover all known conditions. But to be safe additional check
 798 * is put in the code to ensure we don't overwrite.
 799 */
 800#define VCRAT_SIZE_FOR_CPU	(2 * PAGE_SIZE)
 801#define VCRAT_SIZE_FOR_GPU	(4 * PAGE_SIZE)
 802
 803/* kfd_fill_cu_for_cpu - Fill in Compute info for the given CPU NUMA node
 804 *
 805 *	@numa_node_id: CPU NUMA node id
 806 *	@avail_size: Available size in the memory
 807 *	@sub_type_hdr: Memory into which compute info will be filled in
 808 *
 809 *	Return 0 if successful else return -ve value
 810 */
 811static int kfd_fill_cu_for_cpu(int numa_node_id, int *avail_size,
 812				int proximity_domain,
 813				struct crat_subtype_computeunit *sub_type_hdr)
 814{
 815	const struct cpumask *cpumask;
 816
 817	*avail_size -= sizeof(struct crat_subtype_computeunit);
 818	if (*avail_size < 0)
 819		return -ENOMEM;
 820
 821	memset(sub_type_hdr, 0, sizeof(struct crat_subtype_computeunit));
 822
 823	/* Fill in subtype header data */
 824	sub_type_hdr->type = CRAT_SUBTYPE_COMPUTEUNIT_AFFINITY;
 825	sub_type_hdr->length = sizeof(struct crat_subtype_computeunit);
 826	sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;
 827
 828	cpumask = cpumask_of_node(numa_node_id);
 829
 830	/* Fill in CU data */
 831	sub_type_hdr->flags |= CRAT_CU_FLAGS_CPU_PRESENT;
 832	sub_type_hdr->proximity_domain = proximity_domain;
 833	sub_type_hdr->processor_id_low = kfd_numa_node_to_apic_id(numa_node_id);
 834	if (sub_type_hdr->processor_id_low == -1)
 835		return -EINVAL;
 836
 837	sub_type_hdr->num_cpu_cores = cpumask_weight(cpumask);
 838
 839	return 0;
 840}
 841
 842/* kfd_fill_mem_info_for_cpu - Fill in Memory info for the given CPU NUMA node
 843 *
 844 *	@numa_node_id: CPU NUMA node id
 845 *	@avail_size: Available size in the memory
 846 *	@sub_type_hdr: Memory into which compute info will be filled in
 847 *
 848 *	Return 0 if successful else return -ve value
 849 */
 850static int kfd_fill_mem_info_for_cpu(int numa_node_id, int *avail_size,
 851			int proximity_domain,
 852			struct crat_subtype_memory *sub_type_hdr)
 853{
 854	uint64_t mem_in_bytes = 0;
 855	pg_data_t *pgdat;
 856	int zone_type;
 857
 858	*avail_size -= sizeof(struct crat_subtype_memory);
 859	if (*avail_size < 0)
 860		return -ENOMEM;
 861
 862	memset(sub_type_hdr, 0, sizeof(struct crat_subtype_memory));
 863
 864	/* Fill in subtype header data */
 865	sub_type_hdr->type = CRAT_SUBTYPE_MEMORY_AFFINITY;
 866	sub_type_hdr->length = sizeof(struct crat_subtype_memory);
 867	sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;
 868
 869	/* Fill in Memory Subunit data */
 870
 871	/* Unlike si_meminfo, si_meminfo_node is not exported. So
 872	 * the following lines are duplicated from si_meminfo_node
 873	 * function
 874	 */
 875	pgdat = NODE_DATA(numa_node_id);
 876	for (zone_type = 0; zone_type < MAX_NR_ZONES; zone_type++)
 877		mem_in_bytes += zone_managed_pages(&pgdat->node_zones[zone_type]);
 878	mem_in_bytes <<= PAGE_SHIFT;
 879
 880	sub_type_hdr->length_low = lower_32_bits(mem_in_bytes);
 881	sub_type_hdr->length_high = upper_32_bits(mem_in_bytes);
 882	sub_type_hdr->proximity_domain = proximity_domain;
 883
 884	return 0;
 885}
 886
 887#ifdef CONFIG_X86_64
 888static int kfd_fill_iolink_info_for_cpu(int numa_node_id, int *avail_size,
 889				uint32_t *num_entries,
 890				struct crat_subtype_iolink *sub_type_hdr)
 891{
 892	int nid;
 893	struct cpuinfo_x86 *c = &cpu_data(0);
 894	uint8_t link_type;
 895
 896	if (c->x86_vendor == X86_VENDOR_AMD)
 897		link_type = CRAT_IOLINK_TYPE_HYPERTRANSPORT;
 898	else
 899		link_type = CRAT_IOLINK_TYPE_QPI_1_1;
 900
 901	*num_entries = 0;
 902
 903	/* Create IO links from this node to other CPU nodes */
 904	for_each_online_node(nid) {
 905		if (nid == numa_node_id) /* node itself */
 906			continue;
 907
 908		*avail_size -= sizeof(struct crat_subtype_iolink);
 909		if (*avail_size < 0)
 910			return -ENOMEM;
 911
 912		memset(sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));
 913
 914		/* Fill in subtype header data */
 915		sub_type_hdr->type = CRAT_SUBTYPE_IOLINK_AFFINITY;
 916		sub_type_hdr->length = sizeof(struct crat_subtype_iolink);
 917		sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;
 918
 919		/* Fill in IO link data */
 920		sub_type_hdr->proximity_domain_from = numa_node_id;
 921		sub_type_hdr->proximity_domain_to = nid;
 922		sub_type_hdr->io_interface_type = link_type;
 923
 924		(*num_entries)++;
 925		sub_type_hdr++;
 926	}
 927
 928	return 0;
 929}
 930#endif
 931
 932/* kfd_create_vcrat_image_cpu - Create Virtual CRAT for CPU
 933 *
 934 *	@pcrat_image: Fill in VCRAT for CPU
 935 *	@size:	[IN] allocated size of crat_image.
 936 *		[OUT] actual size of data filled in crat_image
 937 */
 938static int kfd_create_vcrat_image_cpu(void *pcrat_image, size_t *size)
 939{
 940	struct crat_header *crat_table = (struct crat_header *)pcrat_image;
 941	struct acpi_table_header *acpi_table;
 942	acpi_status status;
 943	struct crat_subtype_generic *sub_type_hdr;
 944	int avail_size = *size;
 945	int numa_node_id;
 946#ifdef CONFIG_X86_64
 947	uint32_t entries = 0;
 948#endif
 949	int ret = 0;
 950
 951	if (!pcrat_image || avail_size < VCRAT_SIZE_FOR_CPU)
 952		return -EINVAL;
 953
 954	/* Fill in CRAT Header.
 955	 * Modify length and total_entries as subunits are added.
 956	 */
 957	avail_size -= sizeof(struct crat_header);
 958	if (avail_size < 0)
 959		return -ENOMEM;
 960
 961	memset(crat_table, 0, sizeof(struct crat_header));
 962	memcpy(&crat_table->signature, CRAT_SIGNATURE,
 963			sizeof(crat_table->signature));
 964	crat_table->length = sizeof(struct crat_header);
 965
 966	status = acpi_get_table("DSDT", 0, &acpi_table);
 967	if (status != AE_OK)
 968		pr_warn("DSDT table not found for OEM information\n");
 969	else {
 970		crat_table->oem_revision = acpi_table->revision;
 971		memcpy(crat_table->oem_id, acpi_table->oem_id,
 972				CRAT_OEMID_LENGTH);
 973		memcpy(crat_table->oem_table_id, acpi_table->oem_table_id,
 974				CRAT_OEMTABLEID_LENGTH);
 975	}
 976	crat_table->total_entries = 0;
 977	crat_table->num_domains = 0;
 978
 979	sub_type_hdr = (struct crat_subtype_generic *)(crat_table+1);
 980
 981	for_each_online_node(numa_node_id) {
 982		if (kfd_numa_node_to_apic_id(numa_node_id) == -1)
 983			continue;
 984
 985		/* Fill in Subtype: Compute Unit */
 986		ret = kfd_fill_cu_for_cpu(numa_node_id, &avail_size,
 987			crat_table->num_domains,
 988			(struct crat_subtype_computeunit *)sub_type_hdr);
 989		if (ret < 0)
 990			return ret;
 991		crat_table->length += sub_type_hdr->length;
 992		crat_table->total_entries++;
 993
 994		sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
 995			sub_type_hdr->length);
 996
 997		/* Fill in Subtype: Memory */
 998		ret = kfd_fill_mem_info_for_cpu(numa_node_id, &avail_size,
 999			crat_table->num_domains,
1000			(struct crat_subtype_memory *)sub_type_hdr);
1001		if (ret < 0)
1002			return ret;
1003		crat_table->length += sub_type_hdr->length;
1004		crat_table->total_entries++;
1005
1006		sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
1007			sub_type_hdr->length);
1008
1009		/* Fill in Subtype: IO Link */
1010#ifdef CONFIG_X86_64
1011		ret = kfd_fill_iolink_info_for_cpu(numa_node_id, &avail_size,
1012				&entries,
1013				(struct crat_subtype_iolink *)sub_type_hdr);
1014		if (ret < 0)
1015			return ret;
1016		crat_table->length += (sub_type_hdr->length * entries);
1017		crat_table->total_entries += entries;
1018
1019		sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
1020				sub_type_hdr->length * entries);
1021#else
1022		pr_info("IO link not available for non x86 platforms\n");
1023#endif
1024
1025		crat_table->num_domains++;
1026	}
1027
1028	/* TODO: Add cache Subtype for CPU.
1029	 * Currently, CPU cache information is available in function
1030	 * detect_cache_attributes(cpu) defined in the file
1031	 * ./arch/x86/kernel/cpu/intel_cacheinfo.c. This function is not
1032	 * exported and to get the same information the code needs to be
1033	 * duplicated.
1034	 */
1035
1036	*size = crat_table->length;
1037	pr_info("Virtual CRAT table created for CPU\n");
1038
1039	return 0;
1040}
1041
1042static int kfd_fill_gpu_memory_affinity(int *avail_size,
1043		struct kfd_dev *kdev, uint8_t type, uint64_t size,
1044		struct crat_subtype_memory *sub_type_hdr,
1045		uint32_t proximity_domain,
1046		const struct kfd_local_mem_info *local_mem_info)
1047{
1048	*avail_size -= sizeof(struct crat_subtype_memory);
1049	if (*avail_size < 0)
1050		return -ENOMEM;
1051
1052	memset((void *)sub_type_hdr, 0, sizeof(struct crat_subtype_memory));
1053	sub_type_hdr->type = CRAT_SUBTYPE_MEMORY_AFFINITY;
1054	sub_type_hdr->length = sizeof(struct crat_subtype_memory);
1055	sub_type_hdr->flags |= CRAT_SUBTYPE_FLAGS_ENABLED;
1056
1057	sub_type_hdr->proximity_domain = proximity_domain;
1058
1059	pr_debug("Fill gpu memory affinity - type 0x%x size 0x%llx\n",
1060			type, size);
1061
1062	sub_type_hdr->length_low = lower_32_bits(size);
1063	sub_type_hdr->length_high = upper_32_bits(size);
1064
1065	sub_type_hdr->width = local_mem_info->vram_width;
1066	sub_type_hdr->visibility_type = type;
1067
1068	return 0;
1069}
1070
1071/* kfd_fill_gpu_direct_io_link - Fill in direct io link from GPU
1072 * to its NUMA node
1073 *	@avail_size: Available size in the memory
1074 *	@kdev - [IN] GPU device
1075 *	@sub_type_hdr: Memory into which io link info will be filled in
1076 *	@proximity_domain - proximity domain of the GPU node
1077 *
1078 *	Return 0 if successful else return -ve value
1079 */
1080static int kfd_fill_gpu_direct_io_link_to_cpu(int *avail_size,
1081			struct kfd_dev *kdev,
1082			struct crat_subtype_iolink *sub_type_hdr,
1083			uint32_t proximity_domain)
1084{
1085	*avail_size -= sizeof(struct crat_subtype_iolink);
1086	if (*avail_size < 0)
1087		return -ENOMEM;
1088
1089	memset((void *)sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));
1090
1091	/* Fill in subtype header data */
1092	sub_type_hdr->type = CRAT_SUBTYPE_IOLINK_AFFINITY;
1093	sub_type_hdr->length = sizeof(struct crat_subtype_iolink);
1094	sub_type_hdr->flags |= CRAT_SUBTYPE_FLAGS_ENABLED;
1095	if (kfd_dev_is_large_bar(kdev))
1096		sub_type_hdr->flags |= CRAT_IOLINK_FLAGS_BI_DIRECTIONAL;
1097
1098	/* Fill in IOLINK subtype.
1099	 * TODO: Fill-in other fields of iolink subtype
1100	 */
1101	sub_type_hdr->io_interface_type = CRAT_IOLINK_TYPE_PCIEXPRESS;
1102	sub_type_hdr->proximity_domain_from = proximity_domain;
1103#ifdef CONFIG_NUMA
1104	if (kdev->pdev->dev.numa_node == NUMA_NO_NODE)
1105		sub_type_hdr->proximity_domain_to = 0;
1106	else
1107		sub_type_hdr->proximity_domain_to = kdev->pdev->dev.numa_node;
1108#else
1109	sub_type_hdr->proximity_domain_to = 0;
1110#endif
1111	return 0;
1112}
1113
1114static int kfd_fill_gpu_xgmi_link_to_gpu(int *avail_size,
1115			struct kfd_dev *kdev,
1116			struct kfd_dev *peer_kdev,
1117			struct crat_subtype_iolink *sub_type_hdr,
1118			uint32_t proximity_domain_from,
1119			uint32_t proximity_domain_to)
1120{
1121	*avail_size -= sizeof(struct crat_subtype_iolink);
1122	if (*avail_size < 0)
1123		return -ENOMEM;
1124
1125	memset((void *)sub_type_hdr, 0, sizeof(struct crat_subtype_iolink));
1126
1127	sub_type_hdr->type = CRAT_SUBTYPE_IOLINK_AFFINITY;
1128	sub_type_hdr->length = sizeof(struct crat_subtype_iolink);
1129	sub_type_hdr->flags |= CRAT_SUBTYPE_FLAGS_ENABLED |
1130			       CRAT_IOLINK_FLAGS_BI_DIRECTIONAL;
1131
1132	sub_type_hdr->io_interface_type = CRAT_IOLINK_TYPE_XGMI;
1133	sub_type_hdr->proximity_domain_from = proximity_domain_from;
1134	sub_type_hdr->proximity_domain_to = proximity_domain_to;
1135	sub_type_hdr->num_hops_xgmi =
1136		amdgpu_amdkfd_get_xgmi_hops_count(kdev->kgd, peer_kdev->kgd);
1137	return 0;
1138}
1139
1140/* kfd_create_vcrat_image_gpu - Create Virtual CRAT for CPU
1141 *
1142 *	@pcrat_image: Fill in VCRAT for GPU
1143 *	@size:	[IN] allocated size of crat_image.
1144 *		[OUT] actual size of data filled in crat_image
1145 */
1146static int kfd_create_vcrat_image_gpu(void *pcrat_image,
1147				      size_t *size, struct kfd_dev *kdev,
1148				      uint32_t proximity_domain)
1149{
1150	struct crat_header *crat_table = (struct crat_header *)pcrat_image;
1151	struct crat_subtype_generic *sub_type_hdr;
1152	struct kfd_local_mem_info local_mem_info;
1153	struct kfd_topology_device *peer_dev;
1154	struct crat_subtype_computeunit *cu;
1155	struct kfd_cu_info cu_info;
1156	int avail_size = *size;
1157	uint32_t total_num_of_cu;
1158	int num_of_cache_entries = 0;
1159	int cache_mem_filled = 0;
1160	uint32_t nid = 0;
1161	int ret = 0;
1162
1163	if (!pcrat_image || avail_size < VCRAT_SIZE_FOR_GPU)
1164		return -EINVAL;
1165
1166	/* Fill the CRAT Header.
1167	 * Modify length and total_entries as subunits are added.
1168	 */
1169	avail_size -= sizeof(struct crat_header);
1170	if (avail_size < 0)
1171		return -ENOMEM;
1172
1173	memset(crat_table, 0, sizeof(struct crat_header));
1174
1175	memcpy(&crat_table->signature, CRAT_SIGNATURE,
1176			sizeof(crat_table->signature));
1177	/* Change length as we add more subtypes*/
1178	crat_table->length = sizeof(struct crat_header);
1179	crat_table->num_domains = 1;
1180	crat_table->total_entries = 0;
1181
1182	/* Fill in Subtype: Compute Unit
1183	 * First fill in the sub type header and then sub type data
1184	 */
1185	avail_size -= sizeof(struct crat_subtype_computeunit);
1186	if (avail_size < 0)
1187		return -ENOMEM;
1188
1189	sub_type_hdr = (struct crat_subtype_generic *)(crat_table + 1);
1190	memset(sub_type_hdr, 0, sizeof(struct crat_subtype_computeunit));
1191
1192	sub_type_hdr->type = CRAT_SUBTYPE_COMPUTEUNIT_AFFINITY;
1193	sub_type_hdr->length = sizeof(struct crat_subtype_computeunit);
1194	sub_type_hdr->flags = CRAT_SUBTYPE_FLAGS_ENABLED;
1195
1196	/* Fill CU subtype data */
1197	cu = (struct crat_subtype_computeunit *)sub_type_hdr;
1198	cu->flags |= CRAT_CU_FLAGS_GPU_PRESENT;
1199	cu->proximity_domain = proximity_domain;
1200
1201	amdgpu_amdkfd_get_cu_info(kdev->kgd, &cu_info);
1202	cu->num_simd_per_cu = cu_info.simd_per_cu;
1203	cu->num_simd_cores = cu_info.simd_per_cu * cu_info.cu_active_number;
1204	cu->max_waves_simd = cu_info.max_waves_per_simd;
1205
1206	cu->wave_front_size = cu_info.wave_front_size;
1207	cu->array_count = cu_info.num_shader_arrays_per_engine *
1208		cu_info.num_shader_engines;
1209	total_num_of_cu = (cu->array_count * cu_info.num_cu_per_sh);
1210	cu->processor_id_low = get_and_inc_gpu_processor_id(total_num_of_cu);
1211	cu->num_cu_per_array = cu_info.num_cu_per_sh;
1212	cu->max_slots_scatch_cu = cu_info.max_scratch_slots_per_cu;
1213	cu->num_banks = cu_info.num_shader_engines;
1214	cu->lds_size_in_kb = cu_info.lds_size;
1215
1216	cu->hsa_capability = 0;
1217
1218	/* Check if this node supports IOMMU. During parsing this flag will
1219	 * translate to HSA_CAP_ATS_PRESENT
1220	 */
1221	if (!kfd_iommu_check_device(kdev))
1222		cu->hsa_capability |= CRAT_CU_FLAGS_IOMMU_PRESENT;
1223
1224	crat_table->length += sub_type_hdr->length;
1225	crat_table->total_entries++;
1226
1227	/* Fill in Subtype: Memory. Only on systems with large BAR (no
1228	 * private FB), report memory as public. On other systems
1229	 * report the total FB size (public+private) as a single
1230	 * private heap.
1231	 */
1232	amdgpu_amdkfd_get_local_mem_info(kdev->kgd, &local_mem_info);
1233	sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
1234			sub_type_hdr->length);
1235
1236	if (debug_largebar)
1237		local_mem_info.local_mem_size_private = 0;
1238
1239	if (local_mem_info.local_mem_size_private == 0)
1240		ret = kfd_fill_gpu_memory_affinity(&avail_size,
1241				kdev, HSA_MEM_HEAP_TYPE_FB_PUBLIC,
1242				local_mem_info.local_mem_size_public,
1243				(struct crat_subtype_memory *)sub_type_hdr,
1244				proximity_domain,
1245				&local_mem_info);
1246	else
1247		ret = kfd_fill_gpu_memory_affinity(&avail_size,
1248				kdev, HSA_MEM_HEAP_TYPE_FB_PRIVATE,
1249				local_mem_info.local_mem_size_public +
1250				local_mem_info.local_mem_size_private,
1251				(struct crat_subtype_memory *)sub_type_hdr,
1252				proximity_domain,
1253				&local_mem_info);
1254	if (ret < 0)
1255		return ret;
1256
1257	crat_table->length += sizeof(struct crat_subtype_memory);
1258	crat_table->total_entries++;
1259
1260	/* TODO: Fill in cache information. This information is NOT readily
1261	 * available in KGD
1262	 */
1263	sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
1264		sub_type_hdr->length);
1265	ret = kfd_fill_gpu_cache_info(kdev, cu->processor_id_low,
1266				avail_size,
1267				&cu_info,
1268				(struct crat_subtype_cache *)sub_type_hdr,
1269				&cache_mem_filled,
1270				&num_of_cache_entries);
1271
1272	if (ret < 0)
1273		return ret;
1274
1275	crat_table->length += cache_mem_filled;
1276	crat_table->total_entries += num_of_cache_entries;
1277	avail_size -= cache_mem_filled;
1278
1279	/* Fill in Subtype: IO_LINKS
1280	 *  Only direct links are added here which is Link from GPU to
1281	 *  to its NUMA node. Indirect links are added by userspace.
1282	 */
1283	sub_type_hdr = (typeof(sub_type_hdr))((char *)sub_type_hdr +
1284		cache_mem_filled);
1285	ret = kfd_fill_gpu_direct_io_link_to_cpu(&avail_size, kdev,
1286		(struct crat_subtype_iolink *)sub_type_hdr, proximity_domain);
1287
1288	if (ret < 0)
1289		return ret;
1290
1291	crat_table->length += sub_type_hdr->length;
1292	crat_table->total_entries++;
1293
1294
1295	/* Fill in Subtype: IO_LINKS
1296	 * Direct links from GPU to other GPUs through xGMI.
1297	 * We will loop GPUs that already be processed (with lower value
1298	 * of proximity_domain), add the link for the GPUs with same
1299	 * hive id (from this GPU to other GPU) . The reversed iolink
1300	 * (from other GPU to this GPU) will be added
1301	 * in kfd_parse_subtype_iolink.
1302	 */
1303	if (kdev->hive_id) {
1304		for (nid = 0; nid < proximity_domain; ++nid) {
1305			peer_dev = kfd_topology_device_by_proximity_domain(nid);
1306			if (!peer_dev->gpu)
1307				continue;
1308			if (peer_dev->gpu->hive_id != kdev->hive_id)
1309				continue;
1310			sub_type_hdr = (typeof(sub_type_hdr))(
1311				(char *)sub_type_hdr +
1312				sizeof(struct crat_subtype_iolink));
1313			ret = kfd_fill_gpu_xgmi_link_to_gpu(
1314				&avail_size, kdev, peer_dev->gpu,
1315				(struct crat_subtype_iolink *)sub_type_hdr,
1316				proximity_domain, nid);
1317			if (ret < 0)
1318				return ret;
1319			crat_table->length += sub_type_hdr->length;
1320			crat_table->total_entries++;
1321		}
1322	}
1323	*size = crat_table->length;
1324	pr_info("Virtual CRAT table created for GPU\n");
1325
1326	return ret;
1327}
1328
1329/* kfd_create_crat_image_virtual - Allocates memory for CRAT image and
1330 *		creates a Virtual CRAT (VCRAT) image
1331 *
1332 * NOTE: Call kfd_destroy_crat_image to free CRAT image memory
1333 *
1334 *	@crat_image: VCRAT image created because ACPI does not have a
1335 *		     CRAT for this device
1336 *	@size: [OUT] size of virtual crat_image
1337 *	@flags:	COMPUTE_UNIT_CPU - Create VCRAT for CPU device
1338 *		COMPUTE_UNIT_GPU - Create VCRAT for GPU
1339 *		(COMPUTE_UNIT_CPU | COMPUTE_UNIT_GPU) - Create VCRAT for APU
1340 *			-- this option is not currently implemented.
1341 *			The assumption is that all AMD APUs will have CRAT
1342 *	@kdev: Valid kfd_device required if flags contain COMPUTE_UNIT_GPU
1343 *
1344 *	Return 0 if successful else return -ve value
1345 */
1346int kfd_create_crat_image_virtual(void **crat_image, size_t *size,
1347				  int flags, struct kfd_dev *kdev,
1348				  uint32_t proximity_domain)
1349{
1350	void *pcrat_image = NULL;
1351	int ret = 0;
1352
1353	if (!crat_image)
1354		return -EINVAL;
1355
1356	*crat_image = NULL;
1357
1358	/* Allocate one VCRAT_SIZE_FOR_CPU for CPU virtual CRAT image and
1359	 * VCRAT_SIZE_FOR_GPU for GPU virtual CRAT image. This should cover
1360	 * all the current conditions. A check is put not to overwrite beyond
1361	 * allocated size
1362	 */
1363	switch (flags) {
1364	case COMPUTE_UNIT_CPU:
1365		pcrat_image = kmalloc(VCRAT_SIZE_FOR_CPU, GFP_KERNEL);
1366		if (!pcrat_image)
1367			return -ENOMEM;
1368		*size = VCRAT_SIZE_FOR_CPU;
1369		ret = kfd_create_vcrat_image_cpu(pcrat_image, size);
1370		break;
1371	case COMPUTE_UNIT_GPU:
1372		if (!kdev)
1373			return -EINVAL;
1374		pcrat_image = kmalloc(VCRAT_SIZE_FOR_GPU, GFP_KERNEL);
1375		if (!pcrat_image)
1376			return -ENOMEM;
1377		*size = VCRAT_SIZE_FOR_GPU;
1378		ret = kfd_create_vcrat_image_gpu(pcrat_image, size, kdev,
1379						 proximity_domain);
1380		break;
1381	case (COMPUTE_UNIT_CPU | COMPUTE_UNIT_GPU):
1382		/* TODO: */
1383		ret = -EINVAL;
1384		pr_err("VCRAT not implemented for APU\n");
1385		break;
1386	default:
1387		ret = -EINVAL;
1388	}
1389
1390	if (!ret)
1391		*crat_image = pcrat_image;
1392	else
1393		kfree(pcrat_image);
1394
1395	return ret;
1396}
1397
1398
1399/* kfd_destroy_crat_image
1400 *
1401 *	@crat_image: [IN] - crat_image from kfd_create_crat_image_xxx(..)
1402 *
1403 */
1404void kfd_destroy_crat_image(void *crat_image)
1405{
1406	kfree(crat_image);
1407}