Loading...
1/*
2 * Read address ranges from a Broadcom CNB20LE Host Bridge
3 *
4 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12#include <linux/acpi.h>
13#include <linux/delay.h>
14#include <linux/dmi.h>
15#include <linux/pci.h>
16#include <linux/init.h>
17#include <asm/pci_x86.h>
18
19#include "bus_numa.h"
20
21static void __devinit cnb20le_res(struct pci_dev *dev)
22{
23 struct pci_root_info *info;
24 struct resource res;
25 u16 word1, word2;
26 u8 fbus, lbus;
27 int i;
28
29#ifdef CONFIG_ACPI
30 /*
31 * We should get host bridge information from ACPI unless the BIOS
32 * doesn't support it.
33 */
34 if (acpi_os_get_root_pointer())
35 return;
36#endif
37
38 info = &pci_root_info[pci_root_num];
39 pci_root_num++;
40
41 /* read the PCI bus numbers */
42 pci_read_config_byte(dev, 0x44, &fbus);
43 pci_read_config_byte(dev, 0x45, &lbus);
44 info->bus_min = fbus;
45 info->bus_max = lbus;
46
47 /*
48 * Add the legacy IDE ports on bus 0
49 *
50 * These do not exist anywhere in the bridge registers, AFAICT. I do
51 * not have the datasheet, so this is the best I can do.
52 */
53 if (fbus == 0) {
54 update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
55 update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
56 update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
57 update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
58 update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
59 }
60
61 /* read the non-prefetchable memory window */
62 pci_read_config_word(dev, 0xc0, &word1);
63 pci_read_config_word(dev, 0xc2, &word2);
64 if (word1 != word2) {
65 res.start = (word1 << 16) | 0x0000;
66 res.end = (word2 << 16) | 0xffff;
67 res.flags = IORESOURCE_MEM;
68 update_res(info, res.start, res.end, res.flags, 0);
69 }
70
71 /* read the prefetchable memory window */
72 pci_read_config_word(dev, 0xc4, &word1);
73 pci_read_config_word(dev, 0xc6, &word2);
74 if (word1 != word2) {
75 res.start = (word1 << 16) | 0x0000;
76 res.end = (word2 << 16) | 0xffff;
77 res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
78 update_res(info, res.start, res.end, res.flags, 0);
79 }
80
81 /* read the IO port window */
82 pci_read_config_word(dev, 0xd0, &word1);
83 pci_read_config_word(dev, 0xd2, &word2);
84 if (word1 != word2) {
85 res.start = word1;
86 res.end = word2;
87 res.flags = IORESOURCE_IO;
88 update_res(info, res.start, res.end, res.flags, 0);
89 }
90
91 /* print information about this host bridge */
92 res.start = fbus;
93 res.end = lbus;
94 res.flags = IORESOURCE_BUS;
95 dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n",
96 pci_domain_nr(dev->bus), &res);
97
98 for (i = 0; i < info->res_num; i++)
99 dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]);
100}
101
102DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
103 cnb20le_res);
104
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Read address ranges from a Broadcom CNB20LE Host Bridge
4 *
5 * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
6 */
7
8#include <linux/acpi.h>
9#include <linux/delay.h>
10#include <linux/dmi.h>
11#include <linux/pci.h>
12#include <linux/init.h>
13#include <asm/pci_x86.h>
14#include <asm/pci-direct.h>
15
16#include "bus_numa.h"
17
18static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
19{
20 struct pci_root_info *info;
21 struct pci_root_res *root_res;
22 struct resource res;
23 u16 word1, word2;
24 u8 fbus, lbus;
25
26 /* read the PCI bus numbers */
27 fbus = read_pci_config_byte(bus, slot, func, 0x44);
28 lbus = read_pci_config_byte(bus, slot, func, 0x45);
29 info = alloc_pci_root_info(fbus, lbus, 0, 0);
30
31 /*
32 * Add the legacy IDE ports on bus 0
33 *
34 * These do not exist anywhere in the bridge registers, AFAICT. I do
35 * not have the datasheet, so this is the best I can do.
36 */
37 if (fbus == 0) {
38 update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
39 update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
40 update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
41 update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
42 update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
43 }
44
45 /* read the non-prefetchable memory window */
46 word1 = read_pci_config_16(bus, slot, func, 0xc0);
47 word2 = read_pci_config_16(bus, slot, func, 0xc2);
48 if (word1 != word2) {
49 res.start = ((resource_size_t) word1 << 16) | 0x0000;
50 res.end = ((resource_size_t) word2 << 16) | 0xffff;
51 res.flags = IORESOURCE_MEM;
52 update_res(info, res.start, res.end, res.flags, 0);
53 }
54
55 /* read the prefetchable memory window */
56 word1 = read_pci_config_16(bus, slot, func, 0xc4);
57 word2 = read_pci_config_16(bus, slot, func, 0xc6);
58 if (word1 != word2) {
59 res.start = ((resource_size_t) word1 << 16) | 0x0000;
60 res.end = ((resource_size_t) word2 << 16) | 0xffff;
61 res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
62 update_res(info, res.start, res.end, res.flags, 0);
63 }
64
65 /* read the IO port window */
66 word1 = read_pci_config_16(bus, slot, func, 0xd0);
67 word2 = read_pci_config_16(bus, slot, func, 0xd2);
68 if (word1 != word2) {
69 res.start = word1;
70 res.end = word2;
71 res.flags = IORESOURCE_IO;
72 update_res(info, res.start, res.end, res.flags, 0);
73 }
74
75 /* print information about this host bridge */
76 res.start = fbus;
77 res.end = lbus;
78 res.flags = IORESOURCE_BUS;
79 printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);
80
81 list_for_each_entry(root_res, &info->resources, list)
82 printk(KERN_INFO "host bridge window %pR\n", &root_res->res);
83}
84
85static int __init broadcom_postcore_init(void)
86{
87 u8 bus = 0, slot = 0;
88 u32 id;
89 u16 vendor, device;
90
91#ifdef CONFIG_ACPI
92 /*
93 * We should get host bridge information from ACPI unless the BIOS
94 * doesn't support it.
95 */
96 if (!acpi_disabled && acpi_os_get_root_pointer())
97 return 0;
98#endif
99
100 id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
101 vendor = id & 0xffff;
102 device = (id >> 16) & 0xffff;
103
104 if (vendor == PCI_VENDOR_ID_SERVERWORKS &&
105 device == PCI_DEVICE_ID_SERVERWORKS_LE) {
106 cnb20le_res(bus, slot, 0);
107 cnb20le_res(bus, slot, 1);
108 }
109 return 0;
110}
111
112postcore_initcall(broadcom_postcore_init);