Loading...
1/*
2 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
3 *
4 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License version
8 * 2 as published by the Free Software Foundation.
9 *
10 * Support to set flow control line levels using TIOCMGET and TIOCMSET
11 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
12 * control thanks to Munir Nassar nassarmu@real-time.com
13 *
14 */
15
16#include <linux/kernel.h>
17#include <linux/errno.h>
18#include <linux/slab.h>
19#include <linux/tty.h>
20#include <linux/tty_flip.h>
21#include <linux/module.h>
22#include <linux/moduleparam.h>
23#include <linux/usb.h>
24#include <linux/uaccess.h>
25#include <linux/usb/serial.h>
26
27/*
28 * Version Information
29 */
30#define DRIVER_VERSION "v0.09"
31#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
32
33/*
34 * Function Prototypes
35 */
36static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
37static void cp210x_close(struct usb_serial_port *);
38static void cp210x_get_termios(struct tty_struct *,
39 struct usb_serial_port *port);
40static void cp210x_get_termios_port(struct usb_serial_port *port,
41 unsigned int *cflagp, unsigned int *baudp);
42static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
43 struct ktermios*);
44static int cp210x_tiocmget(struct tty_struct *);
45static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
46static int cp210x_tiocmset_port(struct usb_serial_port *port,
47 unsigned int, unsigned int);
48static void cp210x_break_ctl(struct tty_struct *, int);
49static int cp210x_startup(struct usb_serial *);
50static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
51
52static int debug;
53
54static const struct usb_device_id id_table[] = {
55 { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
56 { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
57 { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
58 { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
59 { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
60 { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
61 { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
62 { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
63 { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
64 { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
65 { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
66 { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
67 { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
68 { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
69 { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
70 { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
71 { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
72 { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
73 { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
74 { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
75 { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
76 { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
77 { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
78 { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
79 { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
80 { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
81 { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
82 { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
83 { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
84 { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
85 { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
86 { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
87 { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
88 { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
89 { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
90 { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
91 { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
92 { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
93 { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
94 { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
95 { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
96 { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
97 { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
98 { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
99 { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
100 { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
101 { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
102 { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
103 { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
104 { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
105 { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
106 { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
107 { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
108 { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
109 { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
110 { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
111 { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
112 { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
113 { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
114 { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
115 { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
116 { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
117 { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
118 { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
119 { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
120 { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
121 { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
122 { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
123 { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
124 { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
125 { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
126 { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
127 { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
128 { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
129 { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
130 { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
131 { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
132 { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
133 { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
134 { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
135 { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
136 { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
137 { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
138 { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
139 { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
140 { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
141 { } /* Terminating Entry */
142};
143
144MODULE_DEVICE_TABLE(usb, id_table);
145
146static struct usb_driver cp210x_driver = {
147 .name = "cp210x",
148 .probe = usb_serial_probe,
149 .disconnect = usb_serial_disconnect,
150 .id_table = id_table,
151 .no_dynamic_id = 1,
152};
153
154static struct usb_serial_driver cp210x_device = {
155 .driver = {
156 .owner = THIS_MODULE,
157 .name = "cp210x",
158 },
159 .usb_driver = &cp210x_driver,
160 .id_table = id_table,
161 .num_ports = 1,
162 .bulk_in_size = 256,
163 .bulk_out_size = 256,
164 .open = cp210x_open,
165 .close = cp210x_close,
166 .break_ctl = cp210x_break_ctl,
167 .set_termios = cp210x_set_termios,
168 .tiocmget = cp210x_tiocmget,
169 .tiocmset = cp210x_tiocmset,
170 .attach = cp210x_startup,
171 .dtr_rts = cp210x_dtr_rts
172};
173
174/* Config request types */
175#define REQTYPE_HOST_TO_DEVICE 0x41
176#define REQTYPE_DEVICE_TO_HOST 0xc1
177
178/* Config request codes */
179#define CP210X_IFC_ENABLE 0x00
180#define CP210X_SET_BAUDDIV 0x01
181#define CP210X_GET_BAUDDIV 0x02
182#define CP210X_SET_LINE_CTL 0x03
183#define CP210X_GET_LINE_CTL 0x04
184#define CP210X_SET_BREAK 0x05
185#define CP210X_IMM_CHAR 0x06
186#define CP210X_SET_MHS 0x07
187#define CP210X_GET_MDMSTS 0x08
188#define CP210X_SET_XON 0x09
189#define CP210X_SET_XOFF 0x0A
190#define CP210X_SET_EVENTMASK 0x0B
191#define CP210X_GET_EVENTMASK 0x0C
192#define CP210X_SET_CHAR 0x0D
193#define CP210X_GET_CHARS 0x0E
194#define CP210X_GET_PROPS 0x0F
195#define CP210X_GET_COMM_STATUS 0x10
196#define CP210X_RESET 0x11
197#define CP210X_PURGE 0x12
198#define CP210X_SET_FLOW 0x13
199#define CP210X_GET_FLOW 0x14
200#define CP210X_EMBED_EVENTS 0x15
201#define CP210X_GET_EVENTSTATE 0x16
202#define CP210X_SET_CHARS 0x19
203
204/* CP210X_IFC_ENABLE */
205#define UART_ENABLE 0x0001
206#define UART_DISABLE 0x0000
207
208/* CP210X_(SET|GET)_BAUDDIV */
209#define BAUD_RATE_GEN_FREQ 0x384000
210
211/* CP210X_(SET|GET)_LINE_CTL */
212#define BITS_DATA_MASK 0X0f00
213#define BITS_DATA_5 0X0500
214#define BITS_DATA_6 0X0600
215#define BITS_DATA_7 0X0700
216#define BITS_DATA_8 0X0800
217#define BITS_DATA_9 0X0900
218
219#define BITS_PARITY_MASK 0x00f0
220#define BITS_PARITY_NONE 0x0000
221#define BITS_PARITY_ODD 0x0010
222#define BITS_PARITY_EVEN 0x0020
223#define BITS_PARITY_MARK 0x0030
224#define BITS_PARITY_SPACE 0x0040
225
226#define BITS_STOP_MASK 0x000f
227#define BITS_STOP_1 0x0000
228#define BITS_STOP_1_5 0x0001
229#define BITS_STOP_2 0x0002
230
231/* CP210X_SET_BREAK */
232#define BREAK_ON 0x0001
233#define BREAK_OFF 0x0000
234
235/* CP210X_(SET_MHS|GET_MDMSTS) */
236#define CONTROL_DTR 0x0001
237#define CONTROL_RTS 0x0002
238#define CONTROL_CTS 0x0010
239#define CONTROL_DSR 0x0020
240#define CONTROL_RING 0x0040
241#define CONTROL_DCD 0x0080
242#define CONTROL_WRITE_DTR 0x0100
243#define CONTROL_WRITE_RTS 0x0200
244
245/*
246 * cp210x_get_config
247 * Reads from the CP210x configuration registers
248 * 'size' is specified in bytes.
249 * 'data' is a pointer to a pre-allocated array of integers large
250 * enough to hold 'size' bytes (with 4 bytes to each integer)
251 */
252static int cp210x_get_config(struct usb_serial_port *port, u8 request,
253 unsigned int *data, int size)
254{
255 struct usb_serial *serial = port->serial;
256 __le32 *buf;
257 int result, i, length;
258
259 /* Number of integers required to contain the array */
260 length = (((size - 1) | 3) + 1)/4;
261
262 buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
263 if (!buf) {
264 dev_err(&port->dev, "%s - out of memory.\n", __func__);
265 return -ENOMEM;
266 }
267
268 /* Issue the request, attempting to read 'size' bytes */
269 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
270 request, REQTYPE_DEVICE_TO_HOST, 0x0000,
271 0, buf, size, 300);
272
273 /* Convert data into an array of integers */
274 for (i = 0; i < length; i++)
275 data[i] = le32_to_cpu(buf[i]);
276
277 kfree(buf);
278
279 if (result != size) {
280 dbg("%s - Unable to send config request, "
281 "request=0x%x size=%d result=%d\n",
282 __func__, request, size, result);
283 return -EPROTO;
284 }
285
286 return 0;
287}
288
289/*
290 * cp210x_set_config
291 * Writes to the CP210x configuration registers
292 * Values less than 16 bits wide are sent directly
293 * 'size' is specified in bytes.
294 */
295static int cp210x_set_config(struct usb_serial_port *port, u8 request,
296 unsigned int *data, int size)
297{
298 struct usb_serial *serial = port->serial;
299 __le32 *buf;
300 int result, i, length;
301
302 /* Number of integers required to contain the array */
303 length = (((size - 1) | 3) + 1)/4;
304
305 buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
306 if (!buf) {
307 dev_err(&port->dev, "%s - out of memory.\n",
308 __func__);
309 return -ENOMEM;
310 }
311
312 /* Array of integers into bytes */
313 for (i = 0; i < length; i++)
314 buf[i] = cpu_to_le32(data[i]);
315
316 if (size > 2) {
317 result = usb_control_msg(serial->dev,
318 usb_sndctrlpipe(serial->dev, 0),
319 request, REQTYPE_HOST_TO_DEVICE, 0x0000,
320 0, buf, size, 300);
321 } else {
322 result = usb_control_msg(serial->dev,
323 usb_sndctrlpipe(serial->dev, 0),
324 request, REQTYPE_HOST_TO_DEVICE, data[0],
325 0, NULL, 0, 300);
326 }
327
328 kfree(buf);
329
330 if ((size > 2 && result != size) || result < 0) {
331 dbg("%s - Unable to send request, "
332 "request=0x%x size=%d result=%d\n",
333 __func__, request, size, result);
334 return -EPROTO;
335 }
336
337 return 0;
338}
339
340/*
341 * cp210x_set_config_single
342 * Convenience function for calling cp210x_set_config on single data values
343 * without requiring an integer pointer
344 */
345static inline int cp210x_set_config_single(struct usb_serial_port *port,
346 u8 request, unsigned int data)
347{
348 return cp210x_set_config(port, request, &data, 2);
349}
350
351/*
352 * cp210x_quantise_baudrate
353 * Quantises the baud rate as per AN205 Table 1
354 */
355static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
356 if (baud <= 56) baud = 0;
357 else if (baud <= 300) baud = 300;
358 else if (baud <= 600) baud = 600;
359 else if (baud <= 1200) baud = 1200;
360 else if (baud <= 1800) baud = 1800;
361 else if (baud <= 2400) baud = 2400;
362 else if (baud <= 4000) baud = 4000;
363 else if (baud <= 4803) baud = 4800;
364 else if (baud <= 7207) baud = 7200;
365 else if (baud <= 9612) baud = 9600;
366 else if (baud <= 14428) baud = 14400;
367 else if (baud <= 16062) baud = 16000;
368 else if (baud <= 19250) baud = 19200;
369 else if (baud <= 28912) baud = 28800;
370 else if (baud <= 38601) baud = 38400;
371 else if (baud <= 51558) baud = 51200;
372 else if (baud <= 56280) baud = 56000;
373 else if (baud <= 58053) baud = 57600;
374 else if (baud <= 64111) baud = 64000;
375 else if (baud <= 77608) baud = 76800;
376 else if (baud <= 117028) baud = 115200;
377 else if (baud <= 129347) baud = 128000;
378 else if (baud <= 156868) baud = 153600;
379 else if (baud <= 237832) baud = 230400;
380 else if (baud <= 254234) baud = 250000;
381 else if (baud <= 273066) baud = 256000;
382 else if (baud <= 491520) baud = 460800;
383 else if (baud <= 567138) baud = 500000;
384 else if (baud <= 670254) baud = 576000;
385 else if (baud <= 1053257) baud = 921600;
386 else if (baud <= 1474560) baud = 1228800;
387 else if (baud <= 2457600) baud = 1843200;
388 else baud = 3686400;
389 return baud;
390}
391
392static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
393{
394 int result;
395
396 dbg("%s - port %d", __func__, port->number);
397
398 if (cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) {
399 dev_err(&port->dev, "%s - Unable to enable UART\n",
400 __func__);
401 return -EPROTO;
402 }
403
404 result = usb_serial_generic_open(tty, port);
405 if (result)
406 return result;
407
408 /* Configure the termios structure */
409 cp210x_get_termios(tty, port);
410 return 0;
411}
412
413static void cp210x_close(struct usb_serial_port *port)
414{
415 dbg("%s - port %d", __func__, port->number);
416
417 usb_serial_generic_close(port);
418
419 mutex_lock(&port->serial->disc_mutex);
420 if (!port->serial->disconnected)
421 cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE);
422 mutex_unlock(&port->serial->disc_mutex);
423}
424
425/*
426 * cp210x_get_termios
427 * Reads the baud rate, data bits, parity, stop bits and flow control mode
428 * from the device, corrects any unsupported values, and configures the
429 * termios structure to reflect the state of the device
430 */
431static void cp210x_get_termios(struct tty_struct *tty,
432 struct usb_serial_port *port)
433{
434 unsigned int baud;
435
436 if (tty) {
437 cp210x_get_termios_port(tty->driver_data,
438 &tty->termios->c_cflag, &baud);
439 tty_encode_baud_rate(tty, baud, baud);
440 }
441
442 else {
443 unsigned int cflag;
444 cflag = 0;
445 cp210x_get_termios_port(port, &cflag, &baud);
446 }
447}
448
449/*
450 * cp210x_get_termios_port
451 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
452 */
453static void cp210x_get_termios_port(struct usb_serial_port *port,
454 unsigned int *cflagp, unsigned int *baudp)
455{
456 unsigned int cflag, modem_ctl[4];
457 unsigned int baud;
458 unsigned int bits;
459
460 dbg("%s - port %d", __func__, port->number);
461
462 cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2);
463 /* Convert to baudrate */
464 if (baud)
465 baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud);
466
467 dbg("%s - baud rate = %d", __func__, baud);
468 *baudp = baud;
469
470 cflag = *cflagp;
471
472 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
473 cflag &= ~CSIZE;
474 switch (bits & BITS_DATA_MASK) {
475 case BITS_DATA_5:
476 dbg("%s - data bits = 5", __func__);
477 cflag |= CS5;
478 break;
479 case BITS_DATA_6:
480 dbg("%s - data bits = 6", __func__);
481 cflag |= CS6;
482 break;
483 case BITS_DATA_7:
484 dbg("%s - data bits = 7", __func__);
485 cflag |= CS7;
486 break;
487 case BITS_DATA_8:
488 dbg("%s - data bits = 8", __func__);
489 cflag |= CS8;
490 break;
491 case BITS_DATA_9:
492 dbg("%s - data bits = 9 (not supported, using 8 data bits)",
493 __func__);
494 cflag |= CS8;
495 bits &= ~BITS_DATA_MASK;
496 bits |= BITS_DATA_8;
497 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
498 break;
499 default:
500 dbg("%s - Unknown number of data bits, using 8", __func__);
501 cflag |= CS8;
502 bits &= ~BITS_DATA_MASK;
503 bits |= BITS_DATA_8;
504 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
505 break;
506 }
507
508 switch (bits & BITS_PARITY_MASK) {
509 case BITS_PARITY_NONE:
510 dbg("%s - parity = NONE", __func__);
511 cflag &= ~PARENB;
512 break;
513 case BITS_PARITY_ODD:
514 dbg("%s - parity = ODD", __func__);
515 cflag |= (PARENB|PARODD);
516 break;
517 case BITS_PARITY_EVEN:
518 dbg("%s - parity = EVEN", __func__);
519 cflag &= ~PARODD;
520 cflag |= PARENB;
521 break;
522 case BITS_PARITY_MARK:
523 dbg("%s - parity = MARK (not supported, disabling parity)",
524 __func__);
525 cflag &= ~PARENB;
526 bits &= ~BITS_PARITY_MASK;
527 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
528 break;
529 case BITS_PARITY_SPACE:
530 dbg("%s - parity = SPACE (not supported, disabling parity)",
531 __func__);
532 cflag &= ~PARENB;
533 bits &= ~BITS_PARITY_MASK;
534 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
535 break;
536 default:
537 dbg("%s - Unknown parity mode, disabling parity", __func__);
538 cflag &= ~PARENB;
539 bits &= ~BITS_PARITY_MASK;
540 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
541 break;
542 }
543
544 cflag &= ~CSTOPB;
545 switch (bits & BITS_STOP_MASK) {
546 case BITS_STOP_1:
547 dbg("%s - stop bits = 1", __func__);
548 break;
549 case BITS_STOP_1_5:
550 dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)",
551 __func__);
552 bits &= ~BITS_STOP_MASK;
553 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
554 break;
555 case BITS_STOP_2:
556 dbg("%s - stop bits = 2", __func__);
557 cflag |= CSTOPB;
558 break;
559 default:
560 dbg("%s - Unknown number of stop bits, using 1 stop bit",
561 __func__);
562 bits &= ~BITS_STOP_MASK;
563 cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2);
564 break;
565 }
566
567 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
568 if (modem_ctl[0] & 0x0008) {
569 dbg("%s - flow control = CRTSCTS", __func__);
570 cflag |= CRTSCTS;
571 } else {
572 dbg("%s - flow control = NONE", __func__);
573 cflag &= ~CRTSCTS;
574 }
575
576 *cflagp = cflag;
577}
578
579static void cp210x_set_termios(struct tty_struct *tty,
580 struct usb_serial_port *port, struct ktermios *old_termios)
581{
582 unsigned int cflag, old_cflag;
583 unsigned int baud = 0, bits;
584 unsigned int modem_ctl[4];
585
586 dbg("%s - port %d", __func__, port->number);
587
588 if (!tty)
589 return;
590
591 tty->termios->c_cflag &= ~CMSPAR;
592 cflag = tty->termios->c_cflag;
593 old_cflag = old_termios->c_cflag;
594 baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty));
595
596 /* If the baud rate is to be updated*/
597 if (baud != tty_termios_baud_rate(old_termios) && baud != 0) {
598 dbg("%s - Setting baud rate to %d baud", __func__,
599 baud);
600 if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
601 ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
602 dbg("Baud rate requested not supported by device");
603 baud = tty_termios_baud_rate(old_termios);
604 }
605 }
606 /* Report back the resulting baud rate */
607 tty_encode_baud_rate(tty, baud, baud);
608
609 /* If the number of data bits is to be updated */
610 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
611 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
612 bits &= ~BITS_DATA_MASK;
613 switch (cflag & CSIZE) {
614 case CS5:
615 bits |= BITS_DATA_5;
616 dbg("%s - data bits = 5", __func__);
617 break;
618 case CS6:
619 bits |= BITS_DATA_6;
620 dbg("%s - data bits = 6", __func__);
621 break;
622 case CS7:
623 bits |= BITS_DATA_7;
624 dbg("%s - data bits = 7", __func__);
625 break;
626 case CS8:
627 bits |= BITS_DATA_8;
628 dbg("%s - data bits = 8", __func__);
629 break;
630 /*case CS9:
631 bits |= BITS_DATA_9;
632 dbg("%s - data bits = 9", __func__);
633 break;*/
634 default:
635 dbg("cp210x driver does not "
636 "support the number of bits requested,"
637 " using 8 bit mode\n");
638 bits |= BITS_DATA_8;
639 break;
640 }
641 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
642 dbg("Number of data bits requested "
643 "not supported by device\n");
644 }
645
646 if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
647 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
648 bits &= ~BITS_PARITY_MASK;
649 if (cflag & PARENB) {
650 if (cflag & PARODD) {
651 bits |= BITS_PARITY_ODD;
652 dbg("%s - parity = ODD", __func__);
653 } else {
654 bits |= BITS_PARITY_EVEN;
655 dbg("%s - parity = EVEN", __func__);
656 }
657 }
658 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
659 dbg("Parity mode not supported "
660 "by device\n");
661 }
662
663 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
664 cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2);
665 bits &= ~BITS_STOP_MASK;
666 if (cflag & CSTOPB) {
667 bits |= BITS_STOP_2;
668 dbg("%s - stop bits = 2", __func__);
669 } else {
670 bits |= BITS_STOP_1;
671 dbg("%s - stop bits = 1", __func__);
672 }
673 if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2))
674 dbg("Number of stop bits requested "
675 "not supported by device\n");
676 }
677
678 if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
679 cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16);
680 dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
681 __func__, modem_ctl[0], modem_ctl[1],
682 modem_ctl[2], modem_ctl[3]);
683
684 if (cflag & CRTSCTS) {
685 modem_ctl[0] &= ~0x7B;
686 modem_ctl[0] |= 0x09;
687 modem_ctl[1] = 0x80;
688 dbg("%s - flow control = CRTSCTS", __func__);
689 } else {
690 modem_ctl[0] &= ~0x7B;
691 modem_ctl[0] |= 0x01;
692 modem_ctl[1] |= 0x40;
693 dbg("%s - flow control = NONE", __func__);
694 }
695
696 dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
697 __func__, modem_ctl[0], modem_ctl[1],
698 modem_ctl[2], modem_ctl[3]);
699 cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16);
700 }
701
702}
703
704static int cp210x_tiocmset (struct tty_struct *tty,
705 unsigned int set, unsigned int clear)
706{
707 struct usb_serial_port *port = tty->driver_data;
708 return cp210x_tiocmset_port(port, set, clear);
709}
710
711static int cp210x_tiocmset_port(struct usb_serial_port *port,
712 unsigned int set, unsigned int clear)
713{
714 unsigned int control = 0;
715
716 dbg("%s - port %d", __func__, port->number);
717
718 if (set & TIOCM_RTS) {
719 control |= CONTROL_RTS;
720 control |= CONTROL_WRITE_RTS;
721 }
722 if (set & TIOCM_DTR) {
723 control |= CONTROL_DTR;
724 control |= CONTROL_WRITE_DTR;
725 }
726 if (clear & TIOCM_RTS) {
727 control &= ~CONTROL_RTS;
728 control |= CONTROL_WRITE_RTS;
729 }
730 if (clear & TIOCM_DTR) {
731 control &= ~CONTROL_DTR;
732 control |= CONTROL_WRITE_DTR;
733 }
734
735 dbg("%s - control = 0x%.4x", __func__, control);
736
737 return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
738}
739
740static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
741{
742 if (on)
743 cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
744 else
745 cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
746}
747
748static int cp210x_tiocmget (struct tty_struct *tty)
749{
750 struct usb_serial_port *port = tty->driver_data;
751 unsigned int control;
752 int result;
753
754 dbg("%s - port %d", __func__, port->number);
755
756 cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
757
758 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
759 |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
760 |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
761 |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
762 |((control & CONTROL_RING)? TIOCM_RI : 0)
763 |((control & CONTROL_DCD) ? TIOCM_CD : 0);
764
765 dbg("%s - control = 0x%.2x", __func__, control);
766
767 return result;
768}
769
770static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
771{
772 struct usb_serial_port *port = tty->driver_data;
773 unsigned int state;
774
775 dbg("%s - port %d", __func__, port->number);
776 if (break_state == 0)
777 state = BREAK_OFF;
778 else
779 state = BREAK_ON;
780 dbg("%s - turning break %s", __func__,
781 state == BREAK_OFF ? "off" : "on");
782 cp210x_set_config(port, CP210X_SET_BREAK, &state, 2);
783}
784
785static int cp210x_startup(struct usb_serial *serial)
786{
787 /* cp210x buffers behave strangely unless device is reset */
788 usb_reset_device(serial->dev);
789 return 0;
790}
791
792static int __init cp210x_init(void)
793{
794 int retval;
795
796 retval = usb_serial_register(&cp210x_device);
797 if (retval)
798 return retval; /* Failed to register */
799
800 retval = usb_register(&cp210x_driver);
801 if (retval) {
802 /* Failed to register */
803 usb_serial_deregister(&cp210x_device);
804 return retval;
805 }
806
807 /* Success */
808 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
809 DRIVER_DESC "\n");
810 return 0;
811}
812
813static void __exit cp210x_exit(void)
814{
815 usb_deregister(&cp210x_driver);
816 usb_serial_deregister(&cp210x_device);
817}
818
819module_init(cp210x_init);
820module_exit(cp210x_exit);
821
822MODULE_DESCRIPTION(DRIVER_DESC);
823MODULE_VERSION(DRIVER_VERSION);
824MODULE_LICENSE("GPL");
825
826module_param(debug, bool, S_IRUGO | S_IWUSR);
827MODULE_PARM_DESC(debug, "Enable verbose debugging messages");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
4 *
5 * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
6 *
7 * Support to set flow control line levels using TIOCMGET and TIOCMSET
8 * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
9 * control thanks to Munir Nassar nassarmu@real-time.com
10 *
11 */
12
13#include <linux/kernel.h>
14#include <linux/errno.h>
15#include <linux/slab.h>
16#include <linux/tty.h>
17#include <linux/tty_flip.h>
18#include <linux/module.h>
19#include <linux/moduleparam.h>
20#include <linux/usb.h>
21#include <linux/uaccess.h>
22#include <linux/usb/serial.h>
23#include <linux/gpio/driver.h>
24#include <linux/bitops.h>
25#include <linux/mutex.h>
26
27#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
28
29/*
30 * Function Prototypes
31 */
32static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
33static void cp210x_close(struct usb_serial_port *);
34static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
35static void cp210x_get_termios_port(struct usb_serial_port *port,
36 tcflag_t *cflagp, unsigned int *baudp);
37static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
38 struct ktermios *);
39static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
40 struct ktermios*);
41static bool cp210x_tx_empty(struct usb_serial_port *port);
42static int cp210x_tiocmget(struct tty_struct *);
43static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
44static int cp210x_tiocmset_port(struct usb_serial_port *port,
45 unsigned int, unsigned int);
46static void cp210x_break_ctl(struct tty_struct *, int);
47static int cp210x_attach(struct usb_serial *);
48static void cp210x_disconnect(struct usb_serial *);
49static void cp210x_release(struct usb_serial *);
50static int cp210x_port_probe(struct usb_serial_port *);
51static int cp210x_port_remove(struct usb_serial_port *);
52static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
53
54static const struct usb_device_id id_table[] = {
55 { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
56 { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
57 { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
58 { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
59 { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
60 { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
61 { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
62 { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
63 { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
64 { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
65 { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
66 { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
67 { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
68 { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
69 { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
70 { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
71 { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
72 { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
73 { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
74 { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
75 { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
76 { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
77 { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
78 { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
79 { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
80 { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
81 { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
82 { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
83 { USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
84 { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
85 { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
86 { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
87 { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
88 { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
89 { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
90 { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
91 { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
92 { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
93 { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
94 { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
95 { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
96 { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
97 { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
98 { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
99 { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
100 { USB_DEVICE(0x10C4, 0x817C) }, /* CESINEL MEDCAL N Power Quality Monitor */
101 { USB_DEVICE(0x10C4, 0x817D) }, /* CESINEL MEDCAL NT Power Quality Monitor */
102 { USB_DEVICE(0x10C4, 0x817E) }, /* CESINEL MEDCAL S Power Quality Monitor */
103 { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
104 { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
105 { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
106 { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
107 { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
108 { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
109 { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
110 { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
111 { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
112 { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
113 { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
114 { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
115 { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
116 { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
117 { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
118 { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
119 { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
120 { USB_DEVICE(0x10C4, 0x82EF) }, /* CESINEL FALCO 6105 AC Power Supply */
121 { USB_DEVICE(0x10C4, 0x82F1) }, /* CESINEL MEDCAL EFD Earth Fault Detector */
122 { USB_DEVICE(0x10C4, 0x82F2) }, /* CESINEL MEDCAL ST Network Analyzer */
123 { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
124 { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
125 { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
126 { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
127 { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
128 { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
129 { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
130 { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
131 { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
132 { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */
133 { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
134 { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
135 { USB_DEVICE(0x10C4, 0x851E) }, /* CESINEL MEDCAL PT Network Analyzer */
136 { USB_DEVICE(0x10C4, 0x85A7) }, /* LifeScan OneTouch Verio IQ */
137 { USB_DEVICE(0x10C4, 0x85B8) }, /* CESINEL ReCon T Energy Logger */
138 { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
139 { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
140 { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
141 { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
142 { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
143 { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
144 { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
145 { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
146 { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
147 { USB_DEVICE(0x10C4, 0x88FB) }, /* CESINEL MEDCAL STII Network Analyzer */
148 { USB_DEVICE(0x10C4, 0x8938) }, /* CESINEL MEDCAL S II Network Analyzer */
149 { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
150 { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
151 { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
152 { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
153 { USB_DEVICE(0x10C4, 0x89A4) }, /* CESINEL FTBC Flexible Thyristor Bridge Controller */
154 { USB_DEVICE(0x10C4, 0x89FB) }, /* Qivicon ZigBee USB Radio Stick */
155 { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
156 { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
157 { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
158 { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
159 { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
160 { USB_DEVICE(0x10C4, 0xEA63) }, /* Silicon Labs Windows Update (CP2101-4/CP2102N) */
161 { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
162 { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
163 { USB_DEVICE(0x10C4, 0xEA7A) }, /* Silicon Labs Windows Update (CP2105) */
164 { USB_DEVICE(0x10C4, 0xEA7B) }, /* Silicon Labs Windows Update (CP2108) */
165 { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
166 { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
167 { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
168 { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
169 { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
170 { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
171 { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
172 { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
173 { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
174 { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
175 { USB_DEVICE(0x155A, 0x1006) }, /* ELDAT Easywave RX09 */
176 { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
177 { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
178 { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
179 { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
180 { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
181 { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
182 { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
183 { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
184 { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
185 { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
186 { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
187 { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
188 { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
189 { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
190 { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
191 { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
192 { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
193 { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
194 { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
195 { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
196 { USB_DEVICE(0x18EF, 0xE030) }, /* ELV ALC 8xxx Battery Charger */
197 { USB_DEVICE(0x18EF, 0xE032) }, /* ELV TFD500 Data Logger */
198 { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
199 { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
200 { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */
201 { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */
202 { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */
203 { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
204 { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
205 { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
206 { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
207 { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
208 { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
209 { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
210 { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
211 { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
212 { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
213 { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
214 { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
215 { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
216 { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
217 { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
218 { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
219 { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
220 { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
221 { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
222 { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
223 { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
224 { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
225 { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
226 { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
227 { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
228 { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
229 { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
230 { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
231 { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
232 { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
233 { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
234 { USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
235 { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
236 { } /* Terminating Entry */
237};
238
239MODULE_DEVICE_TABLE(usb, id_table);
240
241struct cp210x_serial_private {
242#ifdef CONFIG_GPIOLIB
243 struct gpio_chip gc;
244 bool gpio_registered;
245 u8 gpio_pushpull;
246 u8 gpio_altfunc;
247 u8 gpio_input;
248#endif
249 u8 partnum;
250 speed_t min_speed;
251 speed_t max_speed;
252 bool use_actual_rate;
253};
254
255struct cp210x_port_private {
256 __u8 bInterfaceNumber;
257 bool has_swapped_line_ctl;
258};
259
260static struct usb_serial_driver cp210x_device = {
261 .driver = {
262 .owner = THIS_MODULE,
263 .name = "cp210x",
264 },
265 .id_table = id_table,
266 .num_ports = 1,
267 .bulk_in_size = 256,
268 .bulk_out_size = 256,
269 .open = cp210x_open,
270 .close = cp210x_close,
271 .break_ctl = cp210x_break_ctl,
272 .set_termios = cp210x_set_termios,
273 .tx_empty = cp210x_tx_empty,
274 .tiocmget = cp210x_tiocmget,
275 .tiocmset = cp210x_tiocmset,
276 .attach = cp210x_attach,
277 .disconnect = cp210x_disconnect,
278 .release = cp210x_release,
279 .port_probe = cp210x_port_probe,
280 .port_remove = cp210x_port_remove,
281 .dtr_rts = cp210x_dtr_rts
282};
283
284static struct usb_serial_driver * const serial_drivers[] = {
285 &cp210x_device, NULL
286};
287
288/* Config request types */
289#define REQTYPE_HOST_TO_INTERFACE 0x41
290#define REQTYPE_INTERFACE_TO_HOST 0xc1
291#define REQTYPE_HOST_TO_DEVICE 0x40
292#define REQTYPE_DEVICE_TO_HOST 0xc0
293
294/* Config request codes */
295#define CP210X_IFC_ENABLE 0x00
296#define CP210X_SET_BAUDDIV 0x01
297#define CP210X_GET_BAUDDIV 0x02
298#define CP210X_SET_LINE_CTL 0x03
299#define CP210X_GET_LINE_CTL 0x04
300#define CP210X_SET_BREAK 0x05
301#define CP210X_IMM_CHAR 0x06
302#define CP210X_SET_MHS 0x07
303#define CP210X_GET_MDMSTS 0x08
304#define CP210X_SET_XON 0x09
305#define CP210X_SET_XOFF 0x0A
306#define CP210X_SET_EVENTMASK 0x0B
307#define CP210X_GET_EVENTMASK 0x0C
308#define CP210X_SET_CHAR 0x0D
309#define CP210X_GET_CHARS 0x0E
310#define CP210X_GET_PROPS 0x0F
311#define CP210X_GET_COMM_STATUS 0x10
312#define CP210X_RESET 0x11
313#define CP210X_PURGE 0x12
314#define CP210X_SET_FLOW 0x13
315#define CP210X_GET_FLOW 0x14
316#define CP210X_EMBED_EVENTS 0x15
317#define CP210X_GET_EVENTSTATE 0x16
318#define CP210X_SET_CHARS 0x19
319#define CP210X_GET_BAUDRATE 0x1D
320#define CP210X_SET_BAUDRATE 0x1E
321#define CP210X_VENDOR_SPECIFIC 0xFF
322
323/* CP210X_IFC_ENABLE */
324#define UART_ENABLE 0x0001
325#define UART_DISABLE 0x0000
326
327/* CP210X_(SET|GET)_BAUDDIV */
328#define BAUD_RATE_GEN_FREQ 0x384000
329
330/* CP210X_(SET|GET)_LINE_CTL */
331#define BITS_DATA_MASK 0X0f00
332#define BITS_DATA_5 0X0500
333#define BITS_DATA_6 0X0600
334#define BITS_DATA_7 0X0700
335#define BITS_DATA_8 0X0800
336#define BITS_DATA_9 0X0900
337
338#define BITS_PARITY_MASK 0x00f0
339#define BITS_PARITY_NONE 0x0000
340#define BITS_PARITY_ODD 0x0010
341#define BITS_PARITY_EVEN 0x0020
342#define BITS_PARITY_MARK 0x0030
343#define BITS_PARITY_SPACE 0x0040
344
345#define BITS_STOP_MASK 0x000f
346#define BITS_STOP_1 0x0000
347#define BITS_STOP_1_5 0x0001
348#define BITS_STOP_2 0x0002
349
350/* CP210X_SET_BREAK */
351#define BREAK_ON 0x0001
352#define BREAK_OFF 0x0000
353
354/* CP210X_(SET_MHS|GET_MDMSTS) */
355#define CONTROL_DTR 0x0001
356#define CONTROL_RTS 0x0002
357#define CONTROL_CTS 0x0010
358#define CONTROL_DSR 0x0020
359#define CONTROL_RING 0x0040
360#define CONTROL_DCD 0x0080
361#define CONTROL_WRITE_DTR 0x0100
362#define CONTROL_WRITE_RTS 0x0200
363
364/* CP210X_VENDOR_SPECIFIC values */
365#define CP210X_READ_2NCONFIG 0x000E
366#define CP210X_READ_LATCH 0x00C2
367#define CP210X_GET_PARTNUM 0x370B
368#define CP210X_GET_PORTCONFIG 0x370C
369#define CP210X_GET_DEVICEMODE 0x3711
370#define CP210X_WRITE_LATCH 0x37E1
371
372/* Part number definitions */
373#define CP210X_PARTNUM_CP2101 0x01
374#define CP210X_PARTNUM_CP2102 0x02
375#define CP210X_PARTNUM_CP2103 0x03
376#define CP210X_PARTNUM_CP2104 0x04
377#define CP210X_PARTNUM_CP2105 0x05
378#define CP210X_PARTNUM_CP2108 0x08
379#define CP210X_PARTNUM_CP2102N_QFN28 0x20
380#define CP210X_PARTNUM_CP2102N_QFN24 0x21
381#define CP210X_PARTNUM_CP2102N_QFN20 0x22
382#define CP210X_PARTNUM_UNKNOWN 0xFF
383
384/* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
385struct cp210x_comm_status {
386 __le32 ulErrors;
387 __le32 ulHoldReasons;
388 __le32 ulAmountInInQueue;
389 __le32 ulAmountInOutQueue;
390 u8 bEofReceived;
391 u8 bWaitForImmediate;
392 u8 bReserved;
393} __packed;
394
395/*
396 * CP210X_PURGE - 16 bits passed in wValue of USB request.
397 * SiLabs app note AN571 gives a strange description of the 4 bits:
398 * bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
399 * writing 1 to all, however, purges cp2108 well enough to avoid the hang.
400 */
401#define PURGE_ALL 0x000f
402
403/* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
404struct cp210x_flow_ctl {
405 __le32 ulControlHandshake;
406 __le32 ulFlowReplace;
407 __le32 ulXonLimit;
408 __le32 ulXoffLimit;
409} __packed;
410
411/* cp210x_flow_ctl::ulControlHandshake */
412#define CP210X_SERIAL_DTR_MASK GENMASK(1, 0)
413#define CP210X_SERIAL_DTR_SHIFT(_mode) (_mode)
414#define CP210X_SERIAL_CTS_HANDSHAKE BIT(3)
415#define CP210X_SERIAL_DSR_HANDSHAKE BIT(4)
416#define CP210X_SERIAL_DCD_HANDSHAKE BIT(5)
417#define CP210X_SERIAL_DSR_SENSITIVITY BIT(6)
418
419/* values for cp210x_flow_ctl::ulControlHandshake::CP210X_SERIAL_DTR_MASK */
420#define CP210X_SERIAL_DTR_INACTIVE 0
421#define CP210X_SERIAL_DTR_ACTIVE 1
422#define CP210X_SERIAL_DTR_FLOW_CTL 2
423
424/* cp210x_flow_ctl::ulFlowReplace */
425#define CP210X_SERIAL_AUTO_TRANSMIT BIT(0)
426#define CP210X_SERIAL_AUTO_RECEIVE BIT(1)
427#define CP210X_SERIAL_ERROR_CHAR BIT(2)
428#define CP210X_SERIAL_NULL_STRIPPING BIT(3)
429#define CP210X_SERIAL_BREAK_CHAR BIT(4)
430#define CP210X_SERIAL_RTS_MASK GENMASK(7, 6)
431#define CP210X_SERIAL_RTS_SHIFT(_mode) (_mode << 6)
432#define CP210X_SERIAL_XOFF_CONTINUE BIT(31)
433
434/* values for cp210x_flow_ctl::ulFlowReplace::CP210X_SERIAL_RTS_MASK */
435#define CP210X_SERIAL_RTS_INACTIVE 0
436#define CP210X_SERIAL_RTS_ACTIVE 1
437#define CP210X_SERIAL_RTS_FLOW_CTL 2
438
439/* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */
440struct cp210x_pin_mode {
441 u8 eci;
442 u8 sci;
443} __packed;
444
445#define CP210X_PIN_MODE_MODEM 0
446#define CP210X_PIN_MODE_GPIO BIT(0)
447
448/*
449 * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes
450 * on a CP2105 chip. Structure needs padding due to unused/unspecified bytes.
451 */
452struct cp210x_dual_port_config {
453 __le16 gpio_mode;
454 u8 __pad0[2];
455 __le16 reset_state;
456 u8 __pad1[4];
457 __le16 suspend_state;
458 u8 sci_cfg;
459 u8 eci_cfg;
460 u8 device_cfg;
461} __packed;
462
463/*
464 * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xd bytes
465 * on a CP2104 chip. Structure needs padding due to unused/unspecified bytes.
466 */
467struct cp210x_single_port_config {
468 __le16 gpio_mode;
469 u8 __pad0[2];
470 __le16 reset_state;
471 u8 __pad1[4];
472 __le16 suspend_state;
473 u8 device_cfg;
474} __packed;
475
476/* GPIO modes */
477#define CP210X_SCI_GPIO_MODE_OFFSET 9
478#define CP210X_SCI_GPIO_MODE_MASK GENMASK(11, 9)
479
480#define CP210X_ECI_GPIO_MODE_OFFSET 2
481#define CP210X_ECI_GPIO_MODE_MASK GENMASK(3, 2)
482
483#define CP210X_GPIO_MODE_OFFSET 8
484#define CP210X_GPIO_MODE_MASK GENMASK(11, 8)
485
486/* CP2105 port configuration values */
487#define CP2105_GPIO0_TXLED_MODE BIT(0)
488#define CP2105_GPIO1_RXLED_MODE BIT(1)
489#define CP2105_GPIO1_RS485_MODE BIT(2)
490
491/* CP2104 port configuration values */
492#define CP2104_GPIO0_TXLED_MODE BIT(0)
493#define CP2104_GPIO1_RXLED_MODE BIT(1)
494#define CP2104_GPIO2_RS485_MODE BIT(2)
495
496/* CP2102N configuration array indices */
497#define CP210X_2NCONFIG_CONFIG_VERSION_IDX 2
498#define CP210X_2NCONFIG_GPIO_MODE_IDX 581
499#define CP210X_2NCONFIG_GPIO_RSTLATCH_IDX 587
500#define CP210X_2NCONFIG_GPIO_CONTROL_IDX 600
501
502/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
503struct cp210x_gpio_write {
504 u8 mask;
505 u8 state;
506} __packed;
507
508/*
509 * Helper to get interface number when we only have struct usb_serial.
510 */
511static u8 cp210x_interface_num(struct usb_serial *serial)
512{
513 struct usb_host_interface *cur_altsetting;
514
515 cur_altsetting = serial->interface->cur_altsetting;
516
517 return cur_altsetting->desc.bInterfaceNumber;
518}
519
520/*
521 * Reads a variable-sized block of CP210X_ registers, identified by req.
522 * Returns data into buf in native USB byte order.
523 */
524static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
525 void *buf, int bufsize)
526{
527 struct usb_serial *serial = port->serial;
528 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
529 void *dmabuf;
530 int result;
531
532 dmabuf = kmalloc(bufsize, GFP_KERNEL);
533 if (!dmabuf) {
534 /*
535 * FIXME Some callers don't bother to check for error,
536 * at least give them consistent junk until they are fixed
537 */
538 memset(buf, 0, bufsize);
539 return -ENOMEM;
540 }
541
542 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
543 req, REQTYPE_INTERFACE_TO_HOST, 0,
544 port_priv->bInterfaceNumber, dmabuf, bufsize,
545 USB_CTRL_SET_TIMEOUT);
546 if (result == bufsize) {
547 memcpy(buf, dmabuf, bufsize);
548 result = 0;
549 } else {
550 dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
551 req, bufsize, result);
552 if (result >= 0)
553 result = -EIO;
554
555 /*
556 * FIXME Some callers don't bother to check for error,
557 * at least give them consistent junk until they are fixed
558 */
559 memset(buf, 0, bufsize);
560 }
561
562 kfree(dmabuf);
563
564 return result;
565}
566
567/*
568 * Reads any 32-bit CP210X_ register identified by req.
569 */
570static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
571{
572 __le32 le32_val;
573 int err;
574
575 err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
576 if (err) {
577 /*
578 * FIXME Some callers don't bother to check for error,
579 * at least give them consistent junk until they are fixed
580 */
581 *val = 0;
582 return err;
583 }
584
585 *val = le32_to_cpu(le32_val);
586
587 return 0;
588}
589
590/*
591 * Reads any 16-bit CP210X_ register identified by req.
592 */
593static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
594{
595 __le16 le16_val;
596 int err;
597
598 err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
599 if (err)
600 return err;
601
602 *val = le16_to_cpu(le16_val);
603
604 return 0;
605}
606
607/*
608 * Reads any 8-bit CP210X_ register identified by req.
609 */
610static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
611{
612 return cp210x_read_reg_block(port, req, val, sizeof(*val));
613}
614
615/*
616 * Reads a variable-sized vendor block of CP210X_ registers, identified by val.
617 * Returns data into buf in native USB byte order.
618 */
619static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
620 void *buf, int bufsize)
621{
622 void *dmabuf;
623 int result;
624
625 dmabuf = kmalloc(bufsize, GFP_KERNEL);
626 if (!dmabuf)
627 return -ENOMEM;
628
629 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
630 CP210X_VENDOR_SPECIFIC, type, val,
631 cp210x_interface_num(serial), dmabuf, bufsize,
632 USB_CTRL_GET_TIMEOUT);
633 if (result == bufsize) {
634 memcpy(buf, dmabuf, bufsize);
635 result = 0;
636 } else {
637 dev_err(&serial->interface->dev,
638 "failed to get vendor val 0x%04x size %d: %d\n", val,
639 bufsize, result);
640 if (result >= 0)
641 result = -EIO;
642 }
643
644 kfree(dmabuf);
645
646 return result;
647}
648
649/*
650 * Writes any 16-bit CP210X_ register (req) whose value is passed
651 * entirely in the wValue field of the USB request.
652 */
653static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
654{
655 struct usb_serial *serial = port->serial;
656 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
657 int result;
658
659 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
660 req, REQTYPE_HOST_TO_INTERFACE, val,
661 port_priv->bInterfaceNumber, NULL, 0,
662 USB_CTRL_SET_TIMEOUT);
663 if (result < 0) {
664 dev_err(&port->dev, "failed set request 0x%x status: %d\n",
665 req, result);
666 }
667
668 return result;
669}
670
671/*
672 * Writes a variable-sized block of CP210X_ registers, identified by req.
673 * Data in buf must be in native USB byte order.
674 */
675static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
676 void *buf, int bufsize)
677{
678 struct usb_serial *serial = port->serial;
679 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
680 void *dmabuf;
681 int result;
682
683 dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
684 if (!dmabuf)
685 return -ENOMEM;
686
687 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
688 req, REQTYPE_HOST_TO_INTERFACE, 0,
689 port_priv->bInterfaceNumber, dmabuf, bufsize,
690 USB_CTRL_SET_TIMEOUT);
691
692 kfree(dmabuf);
693
694 if (result == bufsize) {
695 result = 0;
696 } else {
697 dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
698 req, bufsize, result);
699 if (result >= 0)
700 result = -EIO;
701 }
702
703 return result;
704}
705
706/*
707 * Writes any 32-bit CP210X_ register identified by req.
708 */
709static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
710{
711 __le32 le32_val;
712
713 le32_val = cpu_to_le32(val);
714
715 return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
716}
717
718#ifdef CONFIG_GPIOLIB
719/*
720 * Writes a variable-sized vendor block of CP210X_ registers, identified by val.
721 * Data in buf must be in native USB byte order.
722 */
723static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
724 u16 val, void *buf, int bufsize)
725{
726 void *dmabuf;
727 int result;
728
729 dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
730 if (!dmabuf)
731 return -ENOMEM;
732
733 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
734 CP210X_VENDOR_SPECIFIC, type, val,
735 cp210x_interface_num(serial), dmabuf, bufsize,
736 USB_CTRL_SET_TIMEOUT);
737
738 kfree(dmabuf);
739
740 if (result == bufsize) {
741 result = 0;
742 } else {
743 dev_err(&serial->interface->dev,
744 "failed to set vendor val 0x%04x size %d: %d\n", val,
745 bufsize, result);
746 if (result >= 0)
747 result = -EIO;
748 }
749
750 return result;
751}
752#endif
753
754/*
755 * Detect CP2108 GET_LINE_CTL bug and activate workaround.
756 * Write a known good value 0x800, read it back.
757 * If it comes back swapped the bug is detected.
758 * Preserve the original register value.
759 */
760static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
761{
762 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
763 u16 line_ctl_save;
764 u16 line_ctl_test;
765 int err;
766
767 err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
768 if (err)
769 return err;
770
771 err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
772 if (err)
773 return err;
774
775 err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
776 if (err)
777 return err;
778
779 if (line_ctl_test == 8) {
780 port_priv->has_swapped_line_ctl = true;
781 line_ctl_save = swab16(line_ctl_save);
782 }
783
784 return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
785}
786
787/*
788 * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
789 * to workaround cp2108 bug and get correct value.
790 */
791static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
792{
793 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
794 int err;
795
796 err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
797 if (err)
798 return err;
799
800 /* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
801 if (port_priv->has_swapped_line_ctl)
802 *ctl = swab16(*ctl);
803
804 return 0;
805}
806
807static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
808{
809 int result;
810
811 result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
812 if (result) {
813 dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
814 return result;
815 }
816
817 /* Configure the termios structure */
818 cp210x_get_termios(tty, port);
819
820 /* The baud rate must be initialised on cp2104 */
821 if (tty)
822 cp210x_change_speed(tty, port, NULL);
823
824 return usb_serial_generic_open(tty, port);
825}
826
827static void cp210x_close(struct usb_serial_port *port)
828{
829 usb_serial_generic_close(port);
830
831 /* Clear both queues; cp2108 needs this to avoid an occasional hang */
832 cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
833
834 cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
835}
836
837/*
838 * Read how many bytes are waiting in the TX queue.
839 */
840static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
841 u32 *count)
842{
843 struct usb_serial *serial = port->serial;
844 struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
845 struct cp210x_comm_status *sts;
846 int result;
847
848 sts = kmalloc(sizeof(*sts), GFP_KERNEL);
849 if (!sts)
850 return -ENOMEM;
851
852 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
853 CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST,
854 0, port_priv->bInterfaceNumber, sts, sizeof(*sts),
855 USB_CTRL_GET_TIMEOUT);
856 if (result == sizeof(*sts)) {
857 *count = le32_to_cpu(sts->ulAmountInOutQueue);
858 result = 0;
859 } else {
860 dev_err(&port->dev, "failed to get comm status: %d\n", result);
861 if (result >= 0)
862 result = -EIO;
863 }
864
865 kfree(sts);
866
867 return result;
868}
869
870static bool cp210x_tx_empty(struct usb_serial_port *port)
871{
872 int err;
873 u32 count;
874
875 err = cp210x_get_tx_queue_byte_count(port, &count);
876 if (err)
877 return true;
878
879 return !count;
880}
881
882/*
883 * cp210x_get_termios
884 * Reads the baud rate, data bits, parity, stop bits and flow control mode
885 * from the device, corrects any unsupported values, and configures the
886 * termios structure to reflect the state of the device
887 */
888static void cp210x_get_termios(struct tty_struct *tty,
889 struct usb_serial_port *port)
890{
891 unsigned int baud;
892
893 if (tty) {
894 cp210x_get_termios_port(tty->driver_data,
895 &tty->termios.c_cflag, &baud);
896 tty_encode_baud_rate(tty, baud, baud);
897 } else {
898 tcflag_t cflag;
899 cflag = 0;
900 cp210x_get_termios_port(port, &cflag, &baud);
901 }
902}
903
904/*
905 * cp210x_get_termios_port
906 * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
907 */
908static void cp210x_get_termios_port(struct usb_serial_port *port,
909 tcflag_t *cflagp, unsigned int *baudp)
910{
911 struct device *dev = &port->dev;
912 tcflag_t cflag;
913 struct cp210x_flow_ctl flow_ctl;
914 u32 baud;
915 u16 bits;
916 u32 ctl_hs;
917
918 cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
919
920 dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
921 *baudp = baud;
922
923 cflag = *cflagp;
924
925 cp210x_get_line_ctl(port, &bits);
926 cflag &= ~CSIZE;
927 switch (bits & BITS_DATA_MASK) {
928 case BITS_DATA_5:
929 dev_dbg(dev, "%s - data bits = 5\n", __func__);
930 cflag |= CS5;
931 break;
932 case BITS_DATA_6:
933 dev_dbg(dev, "%s - data bits = 6\n", __func__);
934 cflag |= CS6;
935 break;
936 case BITS_DATA_7:
937 dev_dbg(dev, "%s - data bits = 7\n", __func__);
938 cflag |= CS7;
939 break;
940 case BITS_DATA_8:
941 dev_dbg(dev, "%s - data bits = 8\n", __func__);
942 cflag |= CS8;
943 break;
944 case BITS_DATA_9:
945 dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);
946 cflag |= CS8;
947 bits &= ~BITS_DATA_MASK;
948 bits |= BITS_DATA_8;
949 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
950 break;
951 default:
952 dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
953 cflag |= CS8;
954 bits &= ~BITS_DATA_MASK;
955 bits |= BITS_DATA_8;
956 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
957 break;
958 }
959
960 switch (bits & BITS_PARITY_MASK) {
961 case BITS_PARITY_NONE:
962 dev_dbg(dev, "%s - parity = NONE\n", __func__);
963 cflag &= ~PARENB;
964 break;
965 case BITS_PARITY_ODD:
966 dev_dbg(dev, "%s - parity = ODD\n", __func__);
967 cflag |= (PARENB|PARODD);
968 break;
969 case BITS_PARITY_EVEN:
970 dev_dbg(dev, "%s - parity = EVEN\n", __func__);
971 cflag &= ~PARODD;
972 cflag |= PARENB;
973 break;
974 case BITS_PARITY_MARK:
975 dev_dbg(dev, "%s - parity = MARK\n", __func__);
976 cflag |= (PARENB|PARODD|CMSPAR);
977 break;
978 case BITS_PARITY_SPACE:
979 dev_dbg(dev, "%s - parity = SPACE\n", __func__);
980 cflag &= ~PARODD;
981 cflag |= (PARENB|CMSPAR);
982 break;
983 default:
984 dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
985 cflag &= ~PARENB;
986 bits &= ~BITS_PARITY_MASK;
987 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
988 break;
989 }
990
991 cflag &= ~CSTOPB;
992 switch (bits & BITS_STOP_MASK) {
993 case BITS_STOP_1:
994 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
995 break;
996 case BITS_STOP_1_5:
997 dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
998 bits &= ~BITS_STOP_MASK;
999 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1000 break;
1001 case BITS_STOP_2:
1002 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
1003 cflag |= CSTOPB;
1004 break;
1005 default:
1006 dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
1007 bits &= ~BITS_STOP_MASK;
1008 cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
1009 break;
1010 }
1011
1012 cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
1013 sizeof(flow_ctl));
1014 ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
1015 if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
1016 dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
1017 cflag |= CRTSCTS;
1018 } else {
1019 dev_dbg(dev, "%s - flow control = NONE\n", __func__);
1020 cflag &= ~CRTSCTS;
1021 }
1022
1023 *cflagp = cflag;
1024}
1025
1026struct cp210x_rate {
1027 speed_t rate;
1028 speed_t high;
1029};
1030
1031static const struct cp210x_rate cp210x_an205_table1[] = {
1032 { 300, 300 },
1033 { 600, 600 },
1034 { 1200, 1200 },
1035 { 1800, 1800 },
1036 { 2400, 2400 },
1037 { 4000, 4000 },
1038 { 4800, 4803 },
1039 { 7200, 7207 },
1040 { 9600, 9612 },
1041 { 14400, 14428 },
1042 { 16000, 16062 },
1043 { 19200, 19250 },
1044 { 28800, 28912 },
1045 { 38400, 38601 },
1046 { 51200, 51558 },
1047 { 56000, 56280 },
1048 { 57600, 58053 },
1049 { 64000, 64111 },
1050 { 76800, 77608 },
1051 { 115200, 117028 },
1052 { 128000, 129347 },
1053 { 153600, 156868 },
1054 { 230400, 237832 },
1055 { 250000, 254234 },
1056 { 256000, 273066 },
1057 { 460800, 491520 },
1058 { 500000, 567138 },
1059 { 576000, 670254 },
1060 { 921600, UINT_MAX }
1061};
1062
1063/*
1064 * Quantises the baud rate as per AN205 Table 1
1065 */
1066static speed_t cp210x_get_an205_rate(speed_t baud)
1067{
1068 int i;
1069
1070 for (i = 0; i < ARRAY_SIZE(cp210x_an205_table1); ++i) {
1071 if (baud <= cp210x_an205_table1[i].high)
1072 break;
1073 }
1074
1075 return cp210x_an205_table1[i].rate;
1076}
1077
1078static speed_t cp210x_get_actual_rate(speed_t baud)
1079{
1080 unsigned int prescale = 1;
1081 unsigned int div;
1082
1083 if (baud <= 365)
1084 prescale = 4;
1085
1086 div = DIV_ROUND_CLOSEST(48000000, 2 * prescale * baud);
1087 baud = 48000000 / (2 * prescale * div);
1088
1089 return baud;
1090}
1091
1092/*
1093 * CP2101 supports the following baud rates:
1094 *
1095 * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
1096 * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
1097 *
1098 * CP2102 and CP2103 support the following additional rates:
1099 *
1100 * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
1101 * 576000
1102 *
1103 * The device will map a requested rate to a supported one, but the result
1104 * of requests for rates greater than 1053257 is undefined (see AN205).
1105 *
1106 * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
1107 * respectively, with an error less than 1%. The actual rates are determined
1108 * by
1109 *
1110 * div = round(freq / (2 x prescale x request))
1111 * actual = freq / (2 x prescale x div)
1112 *
1113 * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
1114 * or 1 otherwise.
1115 * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
1116 * otherwise.
1117 */
1118static void cp210x_change_speed(struct tty_struct *tty,
1119 struct usb_serial_port *port, struct ktermios *old_termios)
1120{
1121 struct usb_serial *serial = port->serial;
1122 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1123 u32 baud;
1124
1125 /*
1126 * This maps the requested rate to the actual rate, a valid rate on
1127 * cp2102 or cp2103, or to an arbitrary rate in [1M, max_speed].
1128 *
1129 * NOTE: B0 is not implemented.
1130 */
1131 baud = clamp(tty->termios.c_ospeed, priv->min_speed, priv->max_speed);
1132
1133 if (priv->use_actual_rate)
1134 baud = cp210x_get_actual_rate(baud);
1135 else if (baud < 1000000)
1136 baud = cp210x_get_an205_rate(baud);
1137
1138 dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
1139 if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
1140 dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
1141 if (old_termios)
1142 baud = old_termios->c_ospeed;
1143 else
1144 baud = 9600;
1145 }
1146
1147 tty_encode_baud_rate(tty, baud, baud);
1148}
1149
1150static void cp210x_set_termios(struct tty_struct *tty,
1151 struct usb_serial_port *port, struct ktermios *old_termios)
1152{
1153 struct device *dev = &port->dev;
1154 unsigned int cflag, old_cflag;
1155 u16 bits;
1156
1157 cflag = tty->termios.c_cflag;
1158 old_cflag = old_termios->c_cflag;
1159
1160 if (tty->termios.c_ospeed != old_termios->c_ospeed)
1161 cp210x_change_speed(tty, port, old_termios);
1162
1163 /* If the number of data bits is to be updated */
1164 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
1165 cp210x_get_line_ctl(port, &bits);
1166 bits &= ~BITS_DATA_MASK;
1167 switch (cflag & CSIZE) {
1168 case CS5:
1169 bits |= BITS_DATA_5;
1170 dev_dbg(dev, "%s - data bits = 5\n", __func__);
1171 break;
1172 case CS6:
1173 bits |= BITS_DATA_6;
1174 dev_dbg(dev, "%s - data bits = 6\n", __func__);
1175 break;
1176 case CS7:
1177 bits |= BITS_DATA_7;
1178 dev_dbg(dev, "%s - data bits = 7\n", __func__);
1179 break;
1180 case CS8:
1181 default:
1182 bits |= BITS_DATA_8;
1183 dev_dbg(dev, "%s - data bits = 8\n", __func__);
1184 break;
1185 }
1186 if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1187 dev_dbg(dev, "Number of data bits requested not supported by device\n");
1188 }
1189
1190 if ((cflag & (PARENB|PARODD|CMSPAR)) !=
1191 (old_cflag & (PARENB|PARODD|CMSPAR))) {
1192 cp210x_get_line_ctl(port, &bits);
1193 bits &= ~BITS_PARITY_MASK;
1194 if (cflag & PARENB) {
1195 if (cflag & CMSPAR) {
1196 if (cflag & PARODD) {
1197 bits |= BITS_PARITY_MARK;
1198 dev_dbg(dev, "%s - parity = MARK\n", __func__);
1199 } else {
1200 bits |= BITS_PARITY_SPACE;
1201 dev_dbg(dev, "%s - parity = SPACE\n", __func__);
1202 }
1203 } else {
1204 if (cflag & PARODD) {
1205 bits |= BITS_PARITY_ODD;
1206 dev_dbg(dev, "%s - parity = ODD\n", __func__);
1207 } else {
1208 bits |= BITS_PARITY_EVEN;
1209 dev_dbg(dev, "%s - parity = EVEN\n", __func__);
1210 }
1211 }
1212 }
1213 if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1214 dev_dbg(dev, "Parity mode not supported by device\n");
1215 }
1216
1217 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
1218 cp210x_get_line_ctl(port, &bits);
1219 bits &= ~BITS_STOP_MASK;
1220 if (cflag & CSTOPB) {
1221 bits |= BITS_STOP_2;
1222 dev_dbg(dev, "%s - stop bits = 2\n", __func__);
1223 } else {
1224 bits |= BITS_STOP_1;
1225 dev_dbg(dev, "%s - stop bits = 1\n", __func__);
1226 }
1227 if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
1228 dev_dbg(dev, "Number of stop bits requested not supported by device\n");
1229 }
1230
1231 if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
1232 struct cp210x_flow_ctl flow_ctl;
1233 u32 ctl_hs;
1234 u32 flow_repl;
1235
1236 cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
1237 sizeof(flow_ctl));
1238 ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
1239 flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
1240 dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
1241 __func__, ctl_hs, flow_repl);
1242
1243 ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
1244 ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
1245 ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
1246 ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
1247 ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
1248 if (cflag & CRTSCTS) {
1249 ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
1250
1251 flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1252 flow_repl |= CP210X_SERIAL_RTS_SHIFT(
1253 CP210X_SERIAL_RTS_FLOW_CTL);
1254 dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
1255 } else {
1256 ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
1257
1258 flow_repl &= ~CP210X_SERIAL_RTS_MASK;
1259 flow_repl |= CP210X_SERIAL_RTS_SHIFT(
1260 CP210X_SERIAL_RTS_ACTIVE);
1261 dev_dbg(dev, "%s - flow control = NONE\n", __func__);
1262 }
1263
1264 dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
1265 __func__, ctl_hs, flow_repl);
1266 flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
1267 flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
1268 cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
1269 sizeof(flow_ctl));
1270 }
1271
1272}
1273
1274static int cp210x_tiocmset(struct tty_struct *tty,
1275 unsigned int set, unsigned int clear)
1276{
1277 struct usb_serial_port *port = tty->driver_data;
1278 return cp210x_tiocmset_port(port, set, clear);
1279}
1280
1281static int cp210x_tiocmset_port(struct usb_serial_port *port,
1282 unsigned int set, unsigned int clear)
1283{
1284 u16 control = 0;
1285
1286 if (set & TIOCM_RTS) {
1287 control |= CONTROL_RTS;
1288 control |= CONTROL_WRITE_RTS;
1289 }
1290 if (set & TIOCM_DTR) {
1291 control |= CONTROL_DTR;
1292 control |= CONTROL_WRITE_DTR;
1293 }
1294 if (clear & TIOCM_RTS) {
1295 control &= ~CONTROL_RTS;
1296 control |= CONTROL_WRITE_RTS;
1297 }
1298 if (clear & TIOCM_DTR) {
1299 control &= ~CONTROL_DTR;
1300 control |= CONTROL_WRITE_DTR;
1301 }
1302
1303 dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
1304
1305 return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
1306}
1307
1308static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
1309{
1310 if (on)
1311 cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
1312 else
1313 cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
1314}
1315
1316static int cp210x_tiocmget(struct tty_struct *tty)
1317{
1318 struct usb_serial_port *port = tty->driver_data;
1319 u8 control;
1320 int result;
1321
1322 result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
1323 if (result)
1324 return result;
1325
1326 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
1327 |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
1328 |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
1329 |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
1330 |((control & CONTROL_RING)? TIOCM_RI : 0)
1331 |((control & CONTROL_DCD) ? TIOCM_CD : 0);
1332
1333 dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);
1334
1335 return result;
1336}
1337
1338static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
1339{
1340 struct usb_serial_port *port = tty->driver_data;
1341 u16 state;
1342
1343 if (break_state == 0)
1344 state = BREAK_OFF;
1345 else
1346 state = BREAK_ON;
1347 dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
1348 state == BREAK_OFF ? "off" : "on");
1349 cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
1350}
1351
1352#ifdef CONFIG_GPIOLIB
1353static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset)
1354{
1355 struct usb_serial *serial = gpiochip_get_data(gc);
1356 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1357
1358 if (priv->gpio_altfunc & BIT(offset))
1359 return -ENODEV;
1360
1361 return 0;
1362}
1363
1364static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
1365{
1366 struct usb_serial *serial = gpiochip_get_data(gc);
1367 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1368 u8 req_type = REQTYPE_DEVICE_TO_HOST;
1369 int result;
1370 u8 buf;
1371
1372 if (priv->partnum == CP210X_PARTNUM_CP2105)
1373 req_type = REQTYPE_INTERFACE_TO_HOST;
1374
1375 result = usb_autopm_get_interface(serial->interface);
1376 if (result)
1377 return result;
1378
1379 result = cp210x_read_vendor_block(serial, req_type,
1380 CP210X_READ_LATCH, &buf, sizeof(buf));
1381 usb_autopm_put_interface(serial->interface);
1382 if (result < 0)
1383 return result;
1384
1385 return !!(buf & BIT(gpio));
1386}
1387
1388static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
1389{
1390 struct usb_serial *serial = gpiochip_get_data(gc);
1391 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1392 struct cp210x_gpio_write buf;
1393 int result;
1394
1395 if (value == 1)
1396 buf.state = BIT(gpio);
1397 else
1398 buf.state = 0;
1399
1400 buf.mask = BIT(gpio);
1401
1402 result = usb_autopm_get_interface(serial->interface);
1403 if (result)
1404 goto out;
1405
1406 if (priv->partnum == CP210X_PARTNUM_CP2105) {
1407 result = cp210x_write_vendor_block(serial,
1408 REQTYPE_HOST_TO_INTERFACE,
1409 CP210X_WRITE_LATCH, &buf,
1410 sizeof(buf));
1411 } else {
1412 u16 wIndex = buf.state << 8 | buf.mask;
1413
1414 result = usb_control_msg(serial->dev,
1415 usb_sndctrlpipe(serial->dev, 0),
1416 CP210X_VENDOR_SPECIFIC,
1417 REQTYPE_HOST_TO_DEVICE,
1418 CP210X_WRITE_LATCH,
1419 wIndex,
1420 NULL, 0, USB_CTRL_SET_TIMEOUT);
1421 }
1422
1423 usb_autopm_put_interface(serial->interface);
1424out:
1425 if (result < 0) {
1426 dev_err(&serial->interface->dev, "failed to set GPIO value: %d\n",
1427 result);
1428 }
1429}
1430
1431static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
1432{
1433 struct usb_serial *serial = gpiochip_get_data(gc);
1434 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1435
1436 return priv->gpio_input & BIT(gpio);
1437}
1438
1439static int cp210x_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
1440{
1441 struct usb_serial *serial = gpiochip_get_data(gc);
1442 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1443
1444 if (priv->partnum == CP210X_PARTNUM_CP2105) {
1445 /* hardware does not support an input mode */
1446 return -ENOTSUPP;
1447 }
1448
1449 /* push-pull pins cannot be changed to be inputs */
1450 if (priv->gpio_pushpull & BIT(gpio))
1451 return -EINVAL;
1452
1453 /* make sure to release pin if it is being driven low */
1454 cp210x_gpio_set(gc, gpio, 1);
1455
1456 priv->gpio_input |= BIT(gpio);
1457
1458 return 0;
1459}
1460
1461static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
1462 int value)
1463{
1464 struct usb_serial *serial = gpiochip_get_data(gc);
1465 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1466
1467 priv->gpio_input &= ~BIT(gpio);
1468 cp210x_gpio_set(gc, gpio, value);
1469
1470 return 0;
1471}
1472
1473static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio,
1474 unsigned long config)
1475{
1476 struct usb_serial *serial = gpiochip_get_data(gc);
1477 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1478 enum pin_config_param param = pinconf_to_config_param(config);
1479
1480 /* Succeed only if in correct mode (this can't be set at runtime) */
1481 if ((param == PIN_CONFIG_DRIVE_PUSH_PULL) &&
1482 (priv->gpio_pushpull & BIT(gpio)))
1483 return 0;
1484
1485 if ((param == PIN_CONFIG_DRIVE_OPEN_DRAIN) &&
1486 !(priv->gpio_pushpull & BIT(gpio)))
1487 return 0;
1488
1489 return -ENOTSUPP;
1490}
1491
1492/*
1493 * This function is for configuring GPIO using shared pins, where other signals
1494 * are made unavailable by configuring the use of GPIO. This is believed to be
1495 * only applicable to the cp2105 at this point, the other devices supported by
1496 * this driver that provide GPIO do so in a way that does not impact other
1497 * signals and are thus expected to have very different initialisation.
1498 */
1499static int cp2105_gpioconf_init(struct usb_serial *serial)
1500{
1501 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1502 struct cp210x_pin_mode mode;
1503 struct cp210x_dual_port_config config;
1504 u8 intf_num = cp210x_interface_num(serial);
1505 u8 iface_config;
1506 int result;
1507
1508 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1509 CP210X_GET_DEVICEMODE, &mode,
1510 sizeof(mode));
1511 if (result < 0)
1512 return result;
1513
1514 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1515 CP210X_GET_PORTCONFIG, &config,
1516 sizeof(config));
1517 if (result < 0)
1518 return result;
1519
1520 /* 2 banks of GPIO - One for the pins taken from each serial port */
1521 if (intf_num == 0) {
1522 if (mode.eci == CP210X_PIN_MODE_MODEM) {
1523 /* mark all GPIOs of this interface as reserved */
1524 priv->gpio_altfunc = 0xff;
1525 return 0;
1526 }
1527
1528 iface_config = config.eci_cfg;
1529 priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1530 CP210X_ECI_GPIO_MODE_MASK) >>
1531 CP210X_ECI_GPIO_MODE_OFFSET);
1532 priv->gc.ngpio = 2;
1533 } else if (intf_num == 1) {
1534 if (mode.sci == CP210X_PIN_MODE_MODEM) {
1535 /* mark all GPIOs of this interface as reserved */
1536 priv->gpio_altfunc = 0xff;
1537 return 0;
1538 }
1539
1540 iface_config = config.sci_cfg;
1541 priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1542 CP210X_SCI_GPIO_MODE_MASK) >>
1543 CP210X_SCI_GPIO_MODE_OFFSET);
1544 priv->gc.ngpio = 3;
1545 } else {
1546 return -ENODEV;
1547 }
1548
1549 /* mark all pins which are not in GPIO mode */
1550 if (iface_config & CP2105_GPIO0_TXLED_MODE) /* GPIO 0 */
1551 priv->gpio_altfunc |= BIT(0);
1552 if (iface_config & (CP2105_GPIO1_RXLED_MODE | /* GPIO 1 */
1553 CP2105_GPIO1_RS485_MODE))
1554 priv->gpio_altfunc |= BIT(1);
1555
1556 /* driver implementation for CP2105 only supports outputs */
1557 priv->gpio_input = 0;
1558
1559 return 0;
1560}
1561
1562static int cp2104_gpioconf_init(struct usb_serial *serial)
1563{
1564 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1565 struct cp210x_single_port_config config;
1566 u8 iface_config;
1567 u8 gpio_latch;
1568 int result;
1569 u8 i;
1570
1571 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1572 CP210X_GET_PORTCONFIG, &config,
1573 sizeof(config));
1574 if (result < 0)
1575 return result;
1576
1577 priv->gc.ngpio = 4;
1578
1579 iface_config = config.device_cfg;
1580 priv->gpio_pushpull = (u8)((le16_to_cpu(config.gpio_mode) &
1581 CP210X_GPIO_MODE_MASK) >>
1582 CP210X_GPIO_MODE_OFFSET);
1583 gpio_latch = (u8)((le16_to_cpu(config.reset_state) &
1584 CP210X_GPIO_MODE_MASK) >>
1585 CP210X_GPIO_MODE_OFFSET);
1586
1587 /* mark all pins which are not in GPIO mode */
1588 if (iface_config & CP2104_GPIO0_TXLED_MODE) /* GPIO 0 */
1589 priv->gpio_altfunc |= BIT(0);
1590 if (iface_config & CP2104_GPIO1_RXLED_MODE) /* GPIO 1 */
1591 priv->gpio_altfunc |= BIT(1);
1592 if (iface_config & CP2104_GPIO2_RS485_MODE) /* GPIO 2 */
1593 priv->gpio_altfunc |= BIT(2);
1594
1595 /*
1596 * Like CP2102N, CP2104 has also no strict input and output pin
1597 * modes.
1598 * Do the same input mode emulation as CP2102N.
1599 */
1600 for (i = 0; i < priv->gc.ngpio; ++i) {
1601 /*
1602 * Set direction to "input" iff pin is open-drain and reset
1603 * value is 1.
1604 */
1605 if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
1606 priv->gpio_input |= BIT(i);
1607 }
1608
1609 return 0;
1610}
1611
1612static int cp2102n_gpioconf_init(struct usb_serial *serial)
1613{
1614 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1615 const u16 config_size = 0x02a6;
1616 u8 gpio_rst_latch;
1617 u8 config_version;
1618 u8 gpio_pushpull;
1619 u8 *config_buf;
1620 u8 gpio_latch;
1621 u8 gpio_ctrl;
1622 int result;
1623 u8 i;
1624
1625 /*
1626 * Retrieve device configuration from the device.
1627 * The array received contains all customization settings done at the
1628 * factory/manufacturer. Format of the array is documented at the
1629 * time of writing at:
1630 * https://www.silabs.com/community/interface/knowledge-base.entry.html/2017/03/31/cp2102n_setconfig-xsfa
1631 */
1632 config_buf = kmalloc(config_size, GFP_KERNEL);
1633 if (!config_buf)
1634 return -ENOMEM;
1635
1636 result = cp210x_read_vendor_block(serial,
1637 REQTYPE_DEVICE_TO_HOST,
1638 CP210X_READ_2NCONFIG,
1639 config_buf,
1640 config_size);
1641 if (result < 0) {
1642 kfree(config_buf);
1643 return result;
1644 }
1645
1646 config_version = config_buf[CP210X_2NCONFIG_CONFIG_VERSION_IDX];
1647 gpio_pushpull = config_buf[CP210X_2NCONFIG_GPIO_MODE_IDX];
1648 gpio_ctrl = config_buf[CP210X_2NCONFIG_GPIO_CONTROL_IDX];
1649 gpio_rst_latch = config_buf[CP210X_2NCONFIG_GPIO_RSTLATCH_IDX];
1650
1651 kfree(config_buf);
1652
1653 /* Make sure this is a config format we understand. */
1654 if (config_version != 0x01)
1655 return -ENOTSUPP;
1656
1657 priv->gc.ngpio = 4;
1658
1659 /*
1660 * Get default pin states after reset. Needed so we can determine
1661 * the direction of an open-drain pin.
1662 */
1663 gpio_latch = (gpio_rst_latch >> 3) & 0x0f;
1664
1665 /* 0 indicates open-drain mode, 1 is push-pull */
1666 priv->gpio_pushpull = (gpio_pushpull >> 3) & 0x0f;
1667
1668 /* 0 indicates GPIO mode, 1 is alternate function */
1669 priv->gpio_altfunc = (gpio_ctrl >> 2) & 0x0f;
1670
1671 if (priv->partnum == CP210X_PARTNUM_CP2102N_QFN28) {
1672 /*
1673 * For the QFN28 package, GPIO4-6 are controlled by
1674 * the low three bits of the mode/latch fields.
1675 * Contrary to the document linked above, the bits for
1676 * the SUSPEND pins are elsewhere. No alternate
1677 * function is available for these pins.
1678 */
1679 priv->gc.ngpio = 7;
1680 gpio_latch |= (gpio_rst_latch & 7) << 4;
1681 priv->gpio_pushpull |= (gpio_pushpull & 7) << 4;
1682 }
1683
1684 /*
1685 * The CP2102N does not strictly has input and output pin modes,
1686 * it only knows open-drain and push-pull modes which is set at
1687 * factory. An open-drain pin can function both as an
1688 * input or an output. We emulate input mode for open-drain pins
1689 * by making sure they are not driven low, and we do not allow
1690 * push-pull pins to be set as an input.
1691 */
1692 for (i = 0; i < priv->gc.ngpio; ++i) {
1693 /*
1694 * Set direction to "input" iff pin is open-drain and reset
1695 * value is 1.
1696 */
1697 if (!(priv->gpio_pushpull & BIT(i)) && (gpio_latch & BIT(i)))
1698 priv->gpio_input |= BIT(i);
1699 }
1700
1701 return 0;
1702}
1703
1704static int cp210x_gpio_init(struct usb_serial *serial)
1705{
1706 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1707 int result;
1708
1709 switch (priv->partnum) {
1710 case CP210X_PARTNUM_CP2104:
1711 result = cp2104_gpioconf_init(serial);
1712 break;
1713 case CP210X_PARTNUM_CP2105:
1714 result = cp2105_gpioconf_init(serial);
1715 break;
1716 case CP210X_PARTNUM_CP2102N_QFN28:
1717 case CP210X_PARTNUM_CP2102N_QFN24:
1718 case CP210X_PARTNUM_CP2102N_QFN20:
1719 result = cp2102n_gpioconf_init(serial);
1720 break;
1721 default:
1722 return 0;
1723 }
1724
1725 if (result < 0)
1726 return result;
1727
1728 priv->gc.label = "cp210x";
1729 priv->gc.request = cp210x_gpio_request;
1730 priv->gc.get_direction = cp210x_gpio_direction_get;
1731 priv->gc.direction_input = cp210x_gpio_direction_input;
1732 priv->gc.direction_output = cp210x_gpio_direction_output;
1733 priv->gc.get = cp210x_gpio_get;
1734 priv->gc.set = cp210x_gpio_set;
1735 priv->gc.set_config = cp210x_gpio_set_config;
1736 priv->gc.owner = THIS_MODULE;
1737 priv->gc.parent = &serial->interface->dev;
1738 priv->gc.base = -1;
1739 priv->gc.can_sleep = true;
1740
1741 result = gpiochip_add_data(&priv->gc, serial);
1742 if (!result)
1743 priv->gpio_registered = true;
1744
1745 return result;
1746}
1747
1748static void cp210x_gpio_remove(struct usb_serial *serial)
1749{
1750 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1751
1752 if (priv->gpio_registered) {
1753 gpiochip_remove(&priv->gc);
1754 priv->gpio_registered = false;
1755 }
1756}
1757
1758#else
1759
1760static int cp210x_gpio_init(struct usb_serial *serial)
1761{
1762 return 0;
1763}
1764
1765static void cp210x_gpio_remove(struct usb_serial *serial)
1766{
1767 /* Nothing to do */
1768}
1769
1770#endif
1771
1772static int cp210x_port_probe(struct usb_serial_port *port)
1773{
1774 struct usb_serial *serial = port->serial;
1775 struct cp210x_port_private *port_priv;
1776 int ret;
1777
1778 port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
1779 if (!port_priv)
1780 return -ENOMEM;
1781
1782 port_priv->bInterfaceNumber = cp210x_interface_num(serial);
1783
1784 usb_set_serial_port_data(port, port_priv);
1785
1786 ret = cp210x_detect_swapped_line_ctl(port);
1787 if (ret) {
1788 kfree(port_priv);
1789 return ret;
1790 }
1791
1792 return 0;
1793}
1794
1795static int cp210x_port_remove(struct usb_serial_port *port)
1796{
1797 struct cp210x_port_private *port_priv;
1798
1799 port_priv = usb_get_serial_port_data(port);
1800 kfree(port_priv);
1801
1802 return 0;
1803}
1804
1805static void cp210x_init_max_speed(struct usb_serial *serial)
1806{
1807 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1808 bool use_actual_rate = false;
1809 speed_t min = 300;
1810 speed_t max;
1811
1812 switch (priv->partnum) {
1813 case CP210X_PARTNUM_CP2101:
1814 max = 921600;
1815 break;
1816 case CP210X_PARTNUM_CP2102:
1817 case CP210X_PARTNUM_CP2103:
1818 max = 1000000;
1819 break;
1820 case CP210X_PARTNUM_CP2104:
1821 use_actual_rate = true;
1822 max = 2000000;
1823 break;
1824 case CP210X_PARTNUM_CP2108:
1825 max = 2000000;
1826 break;
1827 case CP210X_PARTNUM_CP2105:
1828 if (cp210x_interface_num(serial) == 0) {
1829 use_actual_rate = true;
1830 max = 2000000; /* ECI */
1831 } else {
1832 min = 2400;
1833 max = 921600; /* SCI */
1834 }
1835 break;
1836 case CP210X_PARTNUM_CP2102N_QFN28:
1837 case CP210X_PARTNUM_CP2102N_QFN24:
1838 case CP210X_PARTNUM_CP2102N_QFN20:
1839 use_actual_rate = true;
1840 max = 3000000;
1841 break;
1842 default:
1843 max = 2000000;
1844 break;
1845 }
1846
1847 priv->min_speed = min;
1848 priv->max_speed = max;
1849 priv->use_actual_rate = use_actual_rate;
1850}
1851
1852static int cp210x_attach(struct usb_serial *serial)
1853{
1854 int result;
1855 struct cp210x_serial_private *priv;
1856
1857 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1858 if (!priv)
1859 return -ENOMEM;
1860
1861 result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
1862 CP210X_GET_PARTNUM, &priv->partnum,
1863 sizeof(priv->partnum));
1864 if (result < 0) {
1865 dev_warn(&serial->interface->dev,
1866 "querying part number failed\n");
1867 priv->partnum = CP210X_PARTNUM_UNKNOWN;
1868 }
1869
1870 usb_set_serial_data(serial, priv);
1871
1872 cp210x_init_max_speed(serial);
1873
1874 result = cp210x_gpio_init(serial);
1875 if (result < 0) {
1876 dev_err(&serial->interface->dev, "GPIO initialisation failed: %d\n",
1877 result);
1878 }
1879
1880 return 0;
1881}
1882
1883static void cp210x_disconnect(struct usb_serial *serial)
1884{
1885 cp210x_gpio_remove(serial);
1886}
1887
1888static void cp210x_release(struct usb_serial *serial)
1889{
1890 struct cp210x_serial_private *priv = usb_get_serial_data(serial);
1891
1892 cp210x_gpio_remove(serial);
1893
1894 kfree(priv);
1895}
1896
1897module_usb_serial_driver(serial_drivers, id_table);
1898
1899MODULE_DESCRIPTION(DRIVER_DESC);
1900MODULE_LICENSE("GPL v2");