Loading...
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6 tristate "USB Serial Converter support"
7 depends on USB
8 ---help---
9 Say Y here if you have a USB device that provides normal serial
10 ports, or acts like a serial device, and you want to connect it to
11 your USB bus.
12
13 Please read <file:Documentation/usb/usb-serial.txt> for more
14 information on the specifics of the different devices that are
15 supported, and on how to use them.
16
17 To compile this driver as a module, choose M here: the
18 module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23 bool "USB Serial Console device support"
24 depends on USB_SERIAL=y
25 ---help---
26 If you say Y here, it will be possible to use a USB to serial
27 converter port as the system console (the system console is the
28 device which receives all kernel messages and warnings and which
29 allows logins in single user mode). This could be useful if some
30 terminal or printer is connected to that serial port.
31
32 Even if you say Y here, the currently visible virtual console
33 (/dev/tty0) will still be used as the system console by default, but
34 you can alter that using a kernel command line option such as
35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36 your boot loader (lilo or loadlin) about how to pass options to the
37 kernel at boot time.)
38
39 If you don't have a VGA card installed and you say Y here, the
40 kernel will automatically use the first USB to serial converter
41 port, /dev/ttyUSB0, as system console.
42
43 If unsure, say N.
44
45config USB_EZUSB
46 bool "Functions for loading firmware on EZUSB chips"
47 help
48 Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51 bool "USB Generic Serial Driver"
52 help
53 Say Y here if you want to use the generic USB serial driver. Please
54 read <file:Documentation/usb/usb-serial.txt> for more information on
55 using this driver. It is recommended that the "USB Serial converter
56 support" be compiled as a module for this driver to be used
57 properly.
58
59config USB_SERIAL_AIRCABLE
60 tristate "USB AIRcable Bluetooth Dongle Driver"
61 help
62 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64 To compile this driver as a module, choose M here: the module
65 will be called aircable.
66
67config USB_SERIAL_ARK3116
68 tristate "USB ARK Micro 3116 USB Serial Driver"
69 help
70 Say Y here if you want to use a ARK Micro 3116 USB to Serial
71 device.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ark3116
75
76config USB_SERIAL_BELKIN
77 tristate "USB Belkin and Peracom Single Port Serial Driver"
78 help
79 Say Y here if you want to use a Belkin USB Serial single port
80 adaptor (F5U103 is one of the model numbers) or the Peracom single
81 port USB to serial adapter.
82
83 To compile this driver as a module, choose M here: the
84 module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87 tristate "USB Winchiphead CH341 Single Port Serial Driver"
88 help
89 Say Y here if you want to use a Winchiphead CH341 single port
90 USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
97 select USB_EZUSB
98 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 ---help---
108 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109 2 port (plus parallel port) and 4 port USB serial converters. The
110 parallel port on the USB 2 appears as a third serial port on Linux.
111 The Digi Acceleport USB 8 is not yet supported by this driver.
112
113 This driver works under SMP with the usb-uhci driver. It does not
114 work under SMP with the uhci driver.
115
116 To compile this driver as a module, choose M here: the
117 module will be called digi_acceleport.
118
119config USB_SERIAL_CP210X
120 tristate "USB CP210x family of UART Bridge Controllers"
121 help
122 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
123 to RS232 converters.
124
125 To compile this driver as a module, choose M here: the
126 module will be called cp210x.
127
128config USB_SERIAL_CYPRESS_M8
129 tristate "USB Cypress M8 USB Serial Driver"
130 help
131 Say Y here if you want to use a device that contains the Cypress
132 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134 Attempted SMP support... send bug reports!
135
136 Supported microcontrollers in the CY4601 family are:
137 CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139 To compile this driver as a module, choose M here: the
140 module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143 tristate "USB Empeg empeg-car Mark I/II Driver"
144 help
145 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
147 device node. See <file:Documentation/usb/usb-serial.txt> for more
148 tidbits of information.
149
150 To compile this driver as a module, choose M here: the
151 module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154 tristate "USB FTDI Single Port Serial Driver"
155 ---help---
156 Say Y here if you want to use a FTDI SIO single port USB to serial
157 converter device. The implementation I have is called the USC-1000.
158 This driver has also be tested with the 245 and 232 devices.
159
160 See <http://ftdi-usb-sio.sourceforge.net/> for more
161 information on this driver and the device.
162
163 To compile this driver as a module, choose M here: the
164 module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167 tristate "USB Fundamental Software Dongle Driver"
168 ---help---
169 Say Y here if you want to use the Fundamental Software dongle.
170
171 To compile this driver as a module, choose M here: the
172 module will be called funsoft.
173
174config USB_SERIAL_VISOR
175 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176 help
177 Say Y here if you want to connect to your HandSpring Visor, Palm
178 m500 or m505 through its USB docking station. See
179 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
180 driver.
181
182 To compile this driver as a module, choose M here: the
183 module will be called visor.
184
185config USB_SERIAL_IPAQ
186 tristate "USB PocketPC PDA Driver"
187 help
188 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189 or any other PDA running Windows CE 3.0 or PocketPC 2002
190 using a USB cradle/cable. For information on using the driver,
191 read <file:Documentation/usb/usb-serial.txt>.
192
193 To compile this driver as a module, choose M here: the
194 module will be called ipaq.
195
196config USB_SERIAL_IR
197 tristate "USB IR Dongle Serial Driver"
198 help
199 Say Y here if you want to enable simple serial support for USB IrDA
200 devices. This is useful if you do not want to use the full IrDA
201 stack.
202
203 To compile this driver as a module, choose M here: the
204 module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207 tristate "USB Inside Out Edgeport Serial Driver"
208 ---help---
209 Say Y here if you want to use any of the following devices from
210 Inside Out Networks (Digi):
211 Edgeport/4
212 Rapidport/4
213 Edgeport/4t
214 Edgeport/2
215 Edgeport/4i
216 Edgeport/2i
217 Edgeport/421
218 Edgeport/21
219 Edgeport/8
220 Edgeport/8 Dual
221 Edgeport/2D8
222 Edgeport/4D8
223 Edgeport/8i
224 Edgeport/2 DIN
225 Edgeport/4 DIN
226 Edgeport/16 Dual
227
228 To compile this driver as a module, choose M here: the
229 module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233 help
234 Say Y here if you want to use any of the devices from Inside Out
235 Networks (Digi) that are not supported by the io_edgeport driver.
236 This includes the Edgeport/1 device.
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_ti.
240
241config USB_SERIAL_GARMIN
242 tristate "USB Garmin GPS driver"
243 help
244 Say Y here if you want to connect to your Garmin GPS.
245 Should work with most Garmin GPS devices which have a native USB port.
246
247 See <http://sourceforge.net/projects/garmin-gps> for the latest
248 version of the driver.
249
250 To compile this driver as a module, choose M here: the
251 module will be called garmin_gps.
252
253config USB_SERIAL_IPW
254 tristate "USB IPWireless (3G UMTS TDD) Driver"
255 help
256 Say Y here if you want to use a IPWireless USB modem such as
257 the ones supplied by Axity3G/Sentech South Africa.
258
259 To compile this driver as a module, choose M here: the
260 module will be called ipw.
261
262config USB_SERIAL_IUU
263 tristate "USB Infinity USB Unlimited Phoenix Driver"
264 help
265 Say Y here if you want to use a IUU in phoenix mode and get
266 an extra ttyUSBx device. More information available on
267 http://eczema.ecze.com/iuu_phoenix.html
268
269 To compile this driver as a module, choose M here: the
270 module will be called iuu_phoenix.o
271
272config USB_SERIAL_KEYSPAN_PDA
273 tristate "USB Keyspan PDA Single Port Serial Driver"
274 select USB_EZUSB
275 help
276 Say Y here if you want to use a Keyspan PDA single port USB to
277 serial converter device. This driver makes use of firmware
278 developed from scratch by Brian Warner.
279
280 To compile this driver as a module, choose M here: the
281 module will be called keyspan_pda.
282
283config USB_SERIAL_KEYSPAN
284 tristate "USB Keyspan USA-xxx Serial Driver"
285 select USB_EZUSB
286 ---help---
287 Say Y here if you want to use Keyspan USB to serial converter
288 devices. This driver makes use of Keyspan's official firmware
289 and was developed with their support. You must also include
290 firmware to support your particular device(s).
291
292 See <http://blemings.org/hugh/keyspan.html> for more information.
293
294 To compile this driver as a module, choose M here: the
295 module will be called keyspan.
296
297config USB_SERIAL_KEYSPAN_MPR
298 bool "USB Keyspan MPR Firmware"
299 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
300 help
301 Say Y here to include firmware for the Keyspan MPR converter.
302
303config USB_SERIAL_KEYSPAN_USA28
304 bool "USB Keyspan USA-28 Firmware"
305 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
306 help
307 Say Y here to include firmware for the USA-28 converter.
308
309config USB_SERIAL_KEYSPAN_USA28X
310 bool "USB Keyspan USA-28X Firmware"
311 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
312 help
313 Say Y here to include firmware for the USA-28X converter.
314 Be sure you have a USA-28X, there are also 28XA and 28XB
315 models, the label underneath has the actual part number.
316
317config USB_SERIAL_KEYSPAN_USA28XA
318 bool "USB Keyspan USA-28XA Firmware"
319 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
320 help
321 Say Y here to include firmware for the USA-28XA converter.
322 Be sure you have a USA-28XA, there are also 28X and 28XB
323 models, the label underneath has the actual part number.
324
325config USB_SERIAL_KEYSPAN_USA28XB
326 bool "USB Keyspan USA-28XB Firmware"
327 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328 help
329 Say Y here to include firmware for the USA-28XB converter.
330 Be sure you have a USA-28XB, there are also 28X and 28XA
331 models, the label underneath has the actual part number.
332
333config USB_SERIAL_KEYSPAN_USA19
334 bool "USB Keyspan USA-19 Firmware"
335 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
336 help
337 Say Y here to include firmware for the USA-19 converter.
338
339config USB_SERIAL_KEYSPAN_USA18X
340 bool "USB Keyspan USA-18X Firmware"
341 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
342 help
343 Say Y here to include firmware for the USA-18X converter.
344
345config USB_SERIAL_KEYSPAN_USA19W
346 bool "USB Keyspan USA-19W Firmware"
347 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348 help
349 Say Y here to include firmware for the USA-19W converter.
350
351config USB_SERIAL_KEYSPAN_USA19QW
352 bool "USB Keyspan USA-19QW Firmware"
353 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354 help
355 Say Y here to include firmware for the USA-19QW converter.
356
357config USB_SERIAL_KEYSPAN_USA19QI
358 bool "USB Keyspan USA-19QI Firmware"
359 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360 help
361 Say Y here to include firmware for the USA-19QI converter.
362
363config USB_SERIAL_KEYSPAN_USA49W
364 bool "USB Keyspan USA-49W Firmware"
365 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366 help
367 Say Y here to include firmware for the USA-49W converter.
368
369config USB_SERIAL_KEYSPAN_USA49WLC
370 bool "USB Keyspan USA-49WLC Firmware"
371 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372 help
373 Say Y here to include firmware for the USA-49WLC converter.
374
375config USB_SERIAL_KLSI
376 tristate "USB KL5KUSB105 (Palmconnect) Driver"
377 ---help---
378 Say Y here if you want to use a KL5KUSB105 - based single port
379 serial adapter. The most widely known -- and currently the only
380 tested -- device in this category is the PalmConnect USB Serial
381 adapter sold by Palm Inc. for use with their Palm III and Palm V
382 series PDAs.
383
384 Please read <file:Documentation/usb/usb-serial.txt> for more
385 information.
386
387 To compile this driver as a module, choose M here: the
388 module will be called kl5kusb105.
389
390config USB_SERIAL_KOBIL_SCT
391 tristate "USB KOBIL chipcard reader"
392 ---help---
393 Say Y here if you want to use one of the following KOBIL USB chipcard
394 readers:
395
396 - USB TWIN
397 - KAAN Standard Plus
398 - KAAN SIM
399 - SecOVID Reader Plus
400 - B1 Professional
401 - KAAN Professional
402
403 Note that you need a current CT-API.
404 To compile this driver as a module, choose M here: the
405 module will be called kobil_sct.
406
407config USB_SERIAL_MCT_U232
408 tristate "USB MCT Single Port Serial Driver"
409 ---help---
410 Say Y here if you want to use a USB Serial single port adapter from
411 Magic Control Technology Corp. (U232 is one of the model numbers).
412
413 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
414 BAY, Belkin F5U109, and Belkin F5U409 devices.
415
416 To compile this driver as a module, choose M here: the
417 module will be called mct_u232.
418
419config USB_SERIAL_MOS7720
420 tristate "USB Moschip 7720 Serial Driver"
421 ---help---
422 Say Y here if you want to use USB Serial single and double
423 port adapters from Moschip Semiconductor Tech.
424
425 To compile this driver as a module, choose M here: the
426 module will be called mos7720.
427
428config USB_SERIAL_MOS7715_PARPORT
429 bool "Support for parallel port on the Moschip 7715"
430 depends on USB_SERIAL_MOS7720
431 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
432 select PARPORT_NOT_PC
433 ---help---
434 Say Y if you have a Moschip 7715 device and would like to use
435 the parallel port it provides. The port will register with
436 the parport subsystem as a low-level driver.
437
438config USB_SERIAL_MOS7840
439 tristate "USB Moschip 7840/7820 USB Serial Driver"
440 ---help---
441 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
442 Dual-Serial port device from MosChip Semiconductor.
443
444 The MCS7840 and MCS7820 have been developed to connect a wide range
445 of standard serial devices to a USB host. The MCS7840 has a USB
446 device controller connected to four (4) individual UARTs while the
447 MCS7820 controller connects to two (2) individual UARTs.
448
449 To compile this driver as a module, choose M here: the
450 module will be called mos7840. If unsure, choose N.
451
452config USB_SERIAL_MOTOROLA
453 tristate "USB Motorola Phone modem driver"
454 ---help---
455 Say Y here if you want to use a Motorola phone with a USB
456 connector as a modem link.
457
458 To compile this driver as a module, choose M here: the
459 module will be called moto_modem. If unsure, choose N.
460
461config USB_SERIAL_NAVMAN
462 tristate "USB Navman GPS device"
463 help
464 To compile this driver as a module, choose M here: the
465 module will be called navman.
466
467config USB_SERIAL_PL2303
468 tristate "USB Prolific 2303 Single Port Serial Driver"
469 help
470 Say Y here if you want to use the PL2303 USB Serial single port
471 adapter from Prolific.
472
473 To compile this driver as a module, choose M here: the
474 module will be called pl2303.
475
476config USB_SERIAL_OTI6858
477 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
478 help
479 Say Y here if you want to use the OTi-6858 single port USB to serial
480 converter device.
481
482 To compile this driver as a module, choose M here: the
483 module will be called oti6858.
484
485config USB_SERIAL_QCAUX
486 tristate "USB Qualcomm Auxiliary Serial Port Driver"
487 help
488 Say Y here if you want to use the auxiliary serial ports provided
489 by many modems based on Qualcomm chipsets. These ports often use
490 a proprietary protocol called DM and cannot be used for AT- or
491 PPP-based communication.
492
493 To compile this driver as a module, choose M here: the
494 module will be called qcaux. If unsure, choose N.
495
496config USB_SERIAL_QUALCOMM
497 tristate "USB Qualcomm Serial modem"
498 select USB_SERIAL_WWAN
499 help
500 Say Y here if you have a Qualcomm USB modem device. These are
501 usually wireless cellular modems.
502
503 To compile this driver as a module, choose M here: the
504 module will be called qcserial.
505
506config USB_SERIAL_SPCP8X5
507 tristate "USB SPCP8x5 USB To Serial Driver"
508 help
509 Say Y here if you want to use the spcp8x5 converter chip. This is
510 commonly found in some Z-Wave USB devices.
511
512 To compile this driver as a module, choose M here: the
513 module will be called spcp8x5.
514
515config USB_SERIAL_HP4X
516 tristate "USB HP4x Calculators support"
517 help
518 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
519
520 To compile this driver as a module, choose M here: the
521 module will be called hp4x.
522
523config USB_SERIAL_SAFE
524 tristate "USB Safe Serial (Encapsulated) Driver"
525
526config USB_SERIAL_SAFE_PADDED
527 bool "USB Secure Encapsulated Driver - Padded"
528 depends on USB_SERIAL_SAFE
529
530config USB_SERIAL_SIEMENS_MPI
531 tristate "USB Siemens MPI driver"
532 help
533 Say M here if you want to use a Siemens USB/MPI adapter.
534
535 To compile this driver as a module, choose M here: the
536 module will be called siemens_mpi.
537
538config USB_SERIAL_SIERRAWIRELESS
539 tristate "USB Sierra Wireless Driver"
540 help
541 Say M here if you want to use Sierra Wireless devices.
542
543 Many devices have a feature known as TRU-Install. For those devices
544 to work properly, the USB Storage Sierra feature must be enabled.
545
546 To compile this driver as a module, choose M here: the
547 module will be called sierra.
548
549config USB_SERIAL_SYMBOL
550 tristate "USB Symbol Barcode driver (serial mode)"
551 help
552 Say Y here if you want to use a Symbol USB Barcode device
553 in serial emulation mode.
554
555 To compile this driver as a module, choose M here: the
556 module will be called symbolserial.
557
558config USB_SERIAL_TI
559 tristate "USB TI 3410/5052 Serial Driver"
560 help
561 Say Y here if you want to use the TI USB 3410 or 5052
562 serial devices.
563
564 To compile this driver as a module, choose M here: the
565 module will be called ti_usb_3410_5052.
566
567config USB_SERIAL_CYBERJACK
568 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
569 ---help---
570 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
571 reader. This is an interface to ISO 7816 compatible contact-based
572 chipcards, e.g. GSM SIMs.
573
574 To compile this driver as a module, choose M here: the
575 module will be called cyberjack.
576
577 If unsure, say N.
578
579config USB_SERIAL_XIRCOM
580 tristate "USB Xircom / Entregra Single Port Serial Driver"
581 select USB_EZUSB
582 help
583 Say Y here if you want to use a Xircom or Entregra single port USB to
584 serial converter device. This driver makes use of firmware
585 developed from scratch by Brian Warner.
586
587 To compile this driver as a module, choose M here: the
588 module will be called keyspan_pda.
589
590config USB_SERIAL_WWAN
591 tristate
592
593config USB_SERIAL_OPTION
594 tristate "USB driver for GSM and CDMA modems"
595 select USB_SERIAL_WWAN
596 help
597 Say Y here if you have a GSM or CDMA modem that's connected to USB.
598
599 This driver also supports several PCMCIA cards which have a
600 built-in OHCI-USB adapter and an internally-connected GSM modem.
601 The USB bus on these cards is not accessible externally.
602
603 Supported devices include (some of?) those made by:
604 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
605
606 To compile this driver as a module, choose M here: the
607 module will be called option.
608
609 If this driver doesn't recognize your device,
610 it might be accessible via the FTDI_SIO driver.
611
612config USB_SERIAL_OMNINET
613 tristate "USB ZyXEL omni.net LCD Plus Driver"
614 help
615 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
616
617 To compile this driver as a module, choose M here: the
618 module will be called omninet.
619
620config USB_SERIAL_OPTICON
621 tristate "USB Opticon Barcode driver (serial mode)"
622 help
623 Say Y here if you want to use a Opticon USB Barcode device
624 in serial emulation mode.
625
626 To compile this driver as a module, choose M here: the
627 module will be called opticon.
628
629config USB_SERIAL_VIVOPAY_SERIAL
630 tristate "USB ViVOpay serial interface driver"
631 help
632 Say Y here if you want to use a ViVOtech ViVOpay USB device.
633
634 To compile this driver as a module, choose M here: the
635 module will be called vivopay-serial.
636
637config USB_SERIAL_ZIO
638 tristate "ZIO Motherboard USB serial interface driver"
639 help
640 Say Y here if you want to use ZIO Motherboard.
641
642 To compile this driver as a module, choose M here: the
643 module will be called zio.
644
645config USB_SERIAL_SSU100
646 tristate "USB Quatech SSU-100 Single Port Serial Driver"
647 help
648 Say Y here if you want to use the Quatech SSU-100 single
649 port usb to serial adapter.
650
651 To compile this driver as a module, choose M here: the
652 module will be called ssu100.
653
654config USB_SERIAL_DEBUG
655 tristate "USB Debugging Device"
656 help
657 Say Y here if you have a USB debugging device used to receive
658 debugging data from another machine. The most common of these
659 devices is the NetChip TurboCONNECT device.
660
661 To compile this driver as a module, choose M here: the
662 module will be called usb-debug.
663
664endif # USB_SERIAL
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Serial device configuration
4#
5
6menuconfig USB_SERIAL
7 tristate "USB Serial Converter support"
8 depends on TTY
9 ---help---
10 Say Y here if you have a USB device that provides normal serial
11 ports, or acts like a serial device, and you want to connect it to
12 your USB bus.
13
14 Please read <file:Documentation/usb/usb-serial.rst> for more
15 information on the specifics of the different devices that are
16 supported, and on how to use them.
17
18 To compile this driver as a module, choose M here: the
19 module will be called usbserial.
20
21if USB_SERIAL
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support"
25 depends on USB_SERIAL=y
26 ---help---
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 help
49 Say Y here if you want to use the generic USB serial driver. Please
50 read <file:Documentation/usb/usb-serial.rst> for more information on
51 using this driver. It is recommended that the "USB Serial converter
52 support" be compiled as a module for this driver to be used
53 properly.
54
55config USB_SERIAL_SIMPLE
56 tristate "USB Serial Simple Driver"
57 help
58 Say Y here to use the USB serial "simple" driver. This driver
59 handles a wide range of very simple devices, all in one
60 driver. Specifically, it supports:
61 - Suunto ANT+ USB device.
62 - Medtronic CareLink USB device
63 - Fundamental Software dongle.
64 - Google USB serial devices
65 - HP4x calculators
66 - Libtransistor USB console
67 - a number of Motorola phones
68 - Motorola Tetra devices
69 - Novatel Wireless GPS receivers
70 - Siemens USB/MPI adapter.
71 - ViVOtech ViVOpay USB device.
72 - Infineon Modem Flashloader USB interface
73 - ZIO Motherboard USB serial interface
74
75 To compile this driver as a module, choose M here: the module
76 will be called usb-serial-simple.
77
78config USB_SERIAL_AIRCABLE
79 tristate "USB AIRcable Bluetooth Dongle Driver"
80 help
81 Say Y here if you want to use USB AIRcable Bluetooth Dongle.
82
83 To compile this driver as a module, choose M here: the module
84 will be called aircable.
85
86config USB_SERIAL_ARK3116
87 tristate "USB ARK Micro 3116 USB Serial Driver"
88 help
89 Say Y here if you want to use a ARK Micro 3116 USB to Serial
90 device.
91
92 To compile this driver as a module, choose M here: the
93 module will be called ark3116
94
95config USB_SERIAL_BELKIN
96 tristate "USB Belkin and Peracom Single Port Serial Driver"
97 help
98 Say Y here if you want to use a Belkin USB Serial single port
99 adaptor (F5U103 is one of the model numbers) or the Peracom single
100 port USB to serial adapter.
101
102 To compile this driver as a module, choose M here: the
103 module will be called belkin_sa.
104
105config USB_SERIAL_CH341
106 tristate "USB Winchiphead CH341 Single Port Serial Driver"
107 help
108 Say Y here if you want to use a Winchiphead CH341 single port
109 USB to serial adapter.
110
111 To compile this driver as a module, choose M here: the
112 module will be called ch341.
113
114config USB_SERIAL_WHITEHEAT
115 tristate "USB ConnectTech WhiteHEAT Serial Driver"
116 select USB_EZUSB_FX2
117 help
118 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
119 USB to serial converter device.
120
121 To compile this driver as a module, choose M here: the
122 module will be called whiteheat.
123
124config USB_SERIAL_DIGI_ACCELEPORT
125 tristate "USB Digi International AccelePort USB Serial Driver"
126 ---help---
127 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
128 2 port (plus parallel port) and 4 port USB serial converters. The
129 parallel port on the USB 2 appears as a third serial port on Linux.
130 The Digi Acceleport USB 8 is not yet supported by this driver.
131
132 This driver works under SMP with the usb-uhci driver. It does not
133 work under SMP with the uhci driver.
134
135 To compile this driver as a module, choose M here: the
136 module will be called digi_acceleport.
137
138config USB_SERIAL_CP210X
139 tristate "USB CP210x family of UART Bridge Controllers"
140 help
141 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
142 to RS232 converters.
143
144 To compile this driver as a module, choose M here: the
145 module will be called cp210x.
146
147config USB_SERIAL_CYPRESS_M8
148 tristate "USB Cypress M8 USB Serial Driver"
149 help
150 Say Y here if you want to use a device that contains the Cypress
151 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
152
153 Attempted SMP support... send bug reports!
154
155 Supported microcontrollers in the CY4601 family are:
156 CY7C63741 CY7C63742 CY7C63743 CY7C64013
157
158 To compile this driver as a module, choose M here: the
159 module will be called cypress_m8.
160
161config USB_SERIAL_EMPEG
162 tristate "USB Empeg empeg-car Mark I/II Driver"
163 help
164 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
165 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
166 device node. See <file:Documentation/usb/usb-serial.rst> for more
167 tidbits of information.
168
169 To compile this driver as a module, choose M here: the
170 module will be called empeg.
171
172config USB_SERIAL_FTDI_SIO
173 tristate "USB FTDI Single Port Serial Driver"
174 ---help---
175 Say Y here if you want to use a FTDI SIO single port USB to serial
176 converter device. The implementation I have is called the USC-1000.
177 This driver has also been tested with the 245 and 232 devices.
178
179 See <http://ftdi-usb-sio.sourceforge.net/> for more
180 information on this driver and the device.
181
182 To compile this driver as a module, choose M here: the
183 module will be called ftdi_sio.
184
185config USB_SERIAL_VISOR
186 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
187 help
188 Say Y here if you want to connect to your HandSpring Visor, Palm
189 m500 or m505 through its USB docking station. See
190 <http://usbvisor.sourceforge.net/index.php3> for more information on using this
191 driver.
192
193 To compile this driver as a module, choose M here: the
194 module will be called visor.
195
196config USB_SERIAL_IPAQ
197 tristate "USB PocketPC PDA Driver"
198 help
199 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
200 or any other PDA running Windows CE 3.0 or PocketPC 2002
201 using a USB cradle/cable. For information on using the driver,
202 read <file:Documentation/usb/usb-serial.rst>.
203
204 To compile this driver as a module, choose M here: the
205 module will be called ipaq.
206
207config USB_SERIAL_IR
208 tristate "USB IR Dongle Serial Driver"
209 help
210 Say Y here if you want to enable simple serial support for USB IrDA
211 devices. This is useful if you do not want to use the full IrDA
212 stack.
213
214 To compile this driver as a module, choose M here: the
215 module will be called ir-usb.
216
217config USB_SERIAL_EDGEPORT
218 tristate "USB Inside Out Edgeport Serial Driver"
219 ---help---
220 Say Y here if you want to use any of the following devices from
221 Inside Out Networks (Digi):
222 Edgeport/4
223 Rapidport/4
224 Edgeport/4t
225 Edgeport/2
226 Edgeport/4i
227 Edgeport/2i
228 Edgeport/421
229 Edgeport/21
230 Edgeport/8
231 Edgeport/8 Dual
232 Edgeport/2D8
233 Edgeport/4D8
234 Edgeport/8i
235 Edgeport/2 DIN
236 Edgeport/4 DIN
237 Edgeport/16 Dual
238
239 To compile this driver as a module, choose M here: the
240 module will be called io_edgeport.
241
242config USB_SERIAL_EDGEPORT_TI
243 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
244 help
245 Say Y here if you want to use any of the devices from Inside Out
246 Networks (Digi) that are not supported by the io_edgeport driver.
247 This includes the Edgeport/1 device.
248
249 To compile this driver as a module, choose M here: the
250 module will be called io_ti.
251
252config USB_SERIAL_F81232
253 tristate "USB Fintek F81232 Single Port Serial Driver"
254 help
255 Say Y here if you want to use the Fintek F81232 single
256 port usb to serial adapter.
257
258 To compile this driver as a module, choose M here: the
259 module will be called f81232.
260
261config USB_SERIAL_F8153X
262 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
263 help
264 Say Y here if you want to use the Fintek F81532/534 Multi-Ports
265 USB to serial adapter.
266
267 To compile this driver as a module, choose M here: the
268 module will be called f81534.
269
270
271config USB_SERIAL_GARMIN
272 tristate "USB Garmin GPS driver"
273 help
274 Say Y here if you want to connect to your Garmin GPS.
275 Should work with most Garmin GPS devices which have a native USB port.
276
277 See <http://sourceforge.net/projects/garmin-gps> for the latest
278 version of the driver.
279
280 To compile this driver as a module, choose M here: the
281 module will be called garmin_gps.
282
283config USB_SERIAL_IPW
284 tristate "USB IPWireless (3G UMTS TDD) Driver"
285 select USB_SERIAL_WWAN
286 help
287 Say Y here if you want to use a IPWireless USB modem such as
288 the ones supplied by Axity3G/Sentech South Africa.
289
290 To compile this driver as a module, choose M here: the
291 module will be called ipw.
292
293config USB_SERIAL_IUU
294 tristate "USB Infinity USB Unlimited Phoenix Driver"
295 help
296 Say Y here if you want to use a IUU in phoenix mode and get
297 an extra ttyUSBx device. More information available on
298 http://eczema.ecze.com/iuu_phoenix.html
299
300 To compile this driver as a module, choose M here: the
301 module will be called iuu_phoenix.o
302
303config USB_SERIAL_KEYSPAN_PDA
304 tristate "USB Keyspan PDA Single Port Serial Driver"
305 select USB_EZUSB_FX2
306 help
307 Say Y here if you want to use a Keyspan PDA single port USB to
308 serial converter device. This driver makes use of firmware
309 developed from scratch by Brian Warner.
310
311 To compile this driver as a module, choose M here: the
312 module will be called keyspan_pda.
313
314config USB_SERIAL_KEYSPAN
315 tristate "USB Keyspan USA-xxx Serial Driver"
316 select USB_EZUSB_FX2
317 ---help---
318 Say Y here if you want to use Keyspan USB to serial converter
319 devices. This driver makes use of Keyspan's official firmware
320 and was developed with their support. You must also include
321 firmware to support your particular device(s).
322
323 See <http://blemings.org/hugh/keyspan.html> for more information.
324
325 To compile this driver as a module, choose M here: the
326 module will be called keyspan.
327
328config USB_SERIAL_KLSI
329 tristate "USB KL5KUSB105 (Palmconnect) Driver"
330 ---help---
331 Say Y here if you want to use a KL5KUSB105 - based single port
332 serial adapter. The most widely known -- and currently the only
333 tested -- device in this category is the PalmConnect USB Serial
334 adapter sold by Palm Inc. for use with their Palm III and Palm V
335 series PDAs.
336
337 Please read <file:Documentation/usb/usb-serial.rst> for more
338 information.
339
340 To compile this driver as a module, choose M here: the
341 module will be called kl5kusb105.
342
343config USB_SERIAL_KOBIL_SCT
344 tristate "USB KOBIL chipcard reader"
345 ---help---
346 Say Y here if you want to use one of the following KOBIL USB chipcard
347 readers:
348
349 - USB TWIN
350 - KAAN Standard Plus
351 - KAAN SIM
352 - SecOVID Reader Plus
353 - B1 Professional
354 - KAAN Professional
355
356 Note that you need a current CT-API.
357 To compile this driver as a module, choose M here: the
358 module will be called kobil_sct.
359
360config USB_SERIAL_MCT_U232
361 tristate "USB MCT Single Port Serial Driver"
362 ---help---
363 Say Y here if you want to use a USB Serial single port adapter from
364 Magic Control Technology Corp. (U232 is one of the model numbers).
365
366 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
367 BAY, Belkin F5U109, and Belkin F5U409 devices.
368
369 To compile this driver as a module, choose M here: the
370 module will be called mct_u232.
371
372config USB_SERIAL_METRO
373 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
374 ---help---
375 Say Y here if you want to use a USB POS Metrologic barcode scanner.
376
377 To compile this driver as a module, choose M here: the
378 module will be called metro-usb.
379
380config USB_SERIAL_MOS7720
381 tristate "USB Moschip 7720 Serial Driver"
382 ---help---
383 Say Y here if you want to use USB Serial single and double
384 port adapters from Moschip Semiconductor Tech.
385
386 To compile this driver as a module, choose M here: the
387 module will be called mos7720.
388
389config USB_SERIAL_MOS7715_PARPORT
390 bool "Support for parallel port on the Moschip 7715"
391 depends on USB_SERIAL_MOS7720
392 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
393 select PARPORT_NOT_PC
394 ---help---
395 Say Y if you have a Moschip 7715 device and would like to use
396 the parallel port it provides. The port will register with
397 the parport subsystem as a low-level driver.
398
399config USB_SERIAL_MOS7840
400 tristate "USB Moschip 7840/7820 USB Serial Driver"
401 ---help---
402 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
403 Dual-Serial port device from MosChip Semiconductor.
404
405 The MCS7840 and MCS7820 have been developed to connect a wide range
406 of standard serial devices to a USB host. The MCS7840 has a USB
407 device controller connected to four (4) individual UARTs while the
408 MCS7820 controller connects to two (2) individual UARTs.
409
410 To compile this driver as a module, choose M here: the
411 module will be called mos7840. If unsure, choose N.
412
413config USB_SERIAL_MXUPORT
414 tristate "USB Moxa UPORT Serial Driver"
415 ---help---
416 Say Y here if you want to use a MOXA UPort Serial hub.
417
418 This driver supports:
419
420 [2 Port]
421 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub
422 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
423 Isolation
424
425 [4 Port]
426 - UPort 1410 : 4 Port RS-232 USB to Serial Hub
427 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub
428 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
429 Isolation
430
431 [8 Port]
432 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
433 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
434
435 [16 Port]
436 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
437 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
438
439 To compile this driver as a module, choose M here: the
440 module will be called mxuport.
441
442config USB_SERIAL_NAVMAN
443 tristate "USB Navman GPS device"
444 help
445 To compile this driver as a module, choose M here: the
446 module will be called navman.
447
448config USB_SERIAL_PL2303
449 tristate "USB Prolific 2303 Single Port Serial Driver"
450 help
451 Say Y here if you want to use the PL2303 USB Serial single port
452 adapter from Prolific.
453
454 To compile this driver as a module, choose M here: the
455 module will be called pl2303.
456
457config USB_SERIAL_OTI6858
458 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
459 help
460 Say Y here if you want to use the OTi-6858 single port USB to serial
461 converter device.
462
463 To compile this driver as a module, choose M here: the
464 module will be called oti6858.
465
466config USB_SERIAL_QCAUX
467 tristate "USB Qualcomm Auxiliary Serial Port Driver"
468 help
469 Say Y here if you want to use the auxiliary serial ports provided
470 by many modems based on Qualcomm chipsets. These ports often use
471 a proprietary protocol called DM and cannot be used for AT- or
472 PPP-based communication.
473
474 To compile this driver as a module, choose M here: the
475 module will be called qcaux. If unsure, choose N.
476
477config USB_SERIAL_QUALCOMM
478 tristate "USB Qualcomm Serial modem"
479 select USB_SERIAL_WWAN
480 help
481 Say Y here if you have a Qualcomm USB modem device. These are
482 usually wireless cellular modems.
483
484 To compile this driver as a module, choose M here: the
485 module will be called qcserial.
486
487config USB_SERIAL_SPCP8X5
488 tristate "USB SPCP8x5 USB To Serial Driver"
489 help
490 Say Y here if you want to use the spcp8x5 converter chip. This is
491 commonly found in some Z-Wave USB devices.
492
493 To compile this driver as a module, choose M here: the
494 module will be called spcp8x5.
495
496config USB_SERIAL_SAFE
497 tristate "USB Safe Serial (Encapsulated) Driver"
498
499config USB_SERIAL_SAFE_PADDED
500 bool "USB Secure Encapsulated Driver - Padded"
501 depends on USB_SERIAL_SAFE
502
503config USB_SERIAL_SIERRAWIRELESS
504 tristate "USB Sierra Wireless Driver"
505 help
506 Say M here if you want to use Sierra Wireless devices.
507
508 Many devices have a feature known as TRU-Install. For those devices
509 to work properly, the USB Storage Sierra feature must be enabled.
510
511 To compile this driver as a module, choose M here: the
512 module will be called sierra.
513
514config USB_SERIAL_SYMBOL
515 tristate "USB Symbol Barcode driver (serial mode)"
516 help
517 Say Y here if you want to use a Symbol USB Barcode device
518 in serial emulation mode.
519
520 To compile this driver as a module, choose M here: the
521 module will be called symbolserial.
522
523config USB_SERIAL_TI
524 tristate "USB TI 3410/5052 Serial Driver"
525 help
526 Say Y here if you want to use the TI USB 3410 or 5052
527 serial devices.
528
529 To compile this driver as a module, choose M here: the
530 module will be called ti_usb_3410_5052.
531
532config USB_SERIAL_CYBERJACK
533 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
534 ---help---
535 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
536 reader. This is an interface to ISO 7816 compatible contact-based
537 chipcards, e.g. GSM SIMs.
538
539 To compile this driver as a module, choose M here: the
540 module will be called cyberjack.
541
542 If unsure, say N.
543
544config USB_SERIAL_XIRCOM
545 tristate "USB Xircom / Entrega Single Port Serial Driver"
546 select USB_EZUSB_FX2
547 help
548 Say Y here if you want to use a Xircom or Entrega single port USB to
549 serial converter device. This driver makes use of firmware
550 developed from scratch by Brian Warner.
551
552 To compile this driver as a module, choose M here: the
553 module will be called keyspan_pda.
554
555config USB_SERIAL_WWAN
556 tristate
557
558config USB_SERIAL_OPTION
559 tristate "USB driver for GSM and CDMA modems"
560 select USB_SERIAL_WWAN
561 help
562 Say Y here if you have a GSM or CDMA modem that's connected to USB.
563
564 This driver also supports several PCMCIA cards which have a
565 built-in OHCI-USB adapter and an internally-connected GSM modem.
566 The USB bus on these cards is not accessible externally.
567
568 Supported devices include (some of?) those made by:
569 Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
570
571 To compile this driver as a module, choose M here: the
572 module will be called option.
573
574 If this driver doesn't recognize your device,
575 it might be accessible via the FTDI_SIO driver.
576
577config USB_SERIAL_OMNINET
578 tristate "USB ZyXEL omni.net LCD Plus Driver"
579 help
580 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
581
582 To compile this driver as a module, choose M here: the
583 module will be called omninet.
584
585config USB_SERIAL_OPTICON
586 tristate "USB Opticon Barcode driver (serial mode)"
587 help
588 Say Y here if you want to use a Opticon USB Barcode device
589 in serial emulation mode.
590
591 To compile this driver as a module, choose M here: the
592 module will be called opticon.
593
594config USB_SERIAL_XSENS_MT
595 tristate "Xsens motion tracker serial interface driver"
596 help
597 Say Y here if you want to use Xsens motion trackers.
598
599 This driver supports the new generation of motion trackers
600 by Xsens. Older devices can be accessed using the FTDI_SIO
601 driver.
602
603 To compile this driver as a module, choose M here: the
604 module will be called xsens_mt.
605
606config USB_SERIAL_WISHBONE
607 tristate "USB-Wishbone adapter interface driver"
608 help
609 Say Y here if you want to use a USB attached Wishbone bus.
610
611 Wishbone is an open hardware SoC bus commonly used in FPGA
612 designs. Bus access can be serialized using the Etherbone
613 protocol <http://www.ohwr.org/projects/etherbone-core>.
614
615 This driver is intended to be used with devices which attach
616 their internal Wishbone bus to a USB serial interface using
617 the Etherbone protocol. A userspace library is required to
618 speak the protocol made available by this driver as ttyUSBx.
619
620 To compile this driver as a module, choose M here: the
621 module will be called wishbone-serial.
622
623config USB_SERIAL_SSU100
624 tristate "USB Quatech SSU-100 Single Port Serial Driver"
625 help
626 Say Y here if you want to use the Quatech SSU-100 single
627 port usb to serial adapter.
628
629 To compile this driver as a module, choose M here: the
630 module will be called ssu100.
631
632config USB_SERIAL_QT2
633 tristate "USB Quatech Serial Driver for USB 2 devices"
634 help
635 Say Y here if you want to use the Quatech USB 2
636 serial adapters.
637
638 To compile this driver as a module, choose M here: the
639 module will be called quatech-serial.
640
641config USB_SERIAL_UPD78F0730
642 tristate "USB Renesas uPD78F0730 Single Port Serial Driver"
643 help
644 Say Y here if you want to use the Renesas uPD78F0730
645 serial driver.
646
647 To compile this driver as a module, choose M here: the
648 module will be called upd78f0730.
649
650config USB_SERIAL_DEBUG
651 tristate "USB Debugging Device"
652 help
653 Say Y here if you have a USB debugging device used to receive
654 debugging data from another machine. The most common of these
655 devices is the NetChip TurboCONNECT device.
656
657 To compile this driver as a module, choose M here: the
658 module will be called usb-debug.
659
660endif # USB_SERIAL