Loading...
1/*
2 * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
3 * Copyright (c) 2008, Jouni Malinen <j@w1.fi>
4 * Copyright (c) 2011, Javier Lopez <jlopex@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#ifndef __MAC80211_HWSIM_H
12#define __MAC80211_HWSIM_H
13
14/**
15 * enum hwsim_tx_control_flags - flags to describe transmission info/status
16 *
17 * These flags are used to give the wmediumd extra information in order to
18 * modify its behavior for each frame
19 *
20 * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
21 * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack
22 * @HWSIM_TX_STAT_ACK: Frame was acknowledged
23 *
24 */
25enum hwsim_tx_control_flags {
26 HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0),
27 HWSIM_TX_CTL_NO_ACK = BIT(1),
28 HWSIM_TX_STAT_ACK = BIT(2),
29};
30
31/**
32 * DOC: Frame transmission/registration support
33 *
34 * Frame transmission and registration support exists to allow userspace
35 * entities such as wmediumd to receive and process all broadcasted
36 * frames from a mac80211_hwsim radio device.
37 *
38 * This allow user space applications to decide if the frame should be
39 * dropped or not and implement a wireless medium simulator at user space.
40 *
41 * Registration is done by sending a register message to the driver and
42 * will be automatically unregistered if the user application doesn't
43 * responds to sent frames.
44 * Once registered the user application has to take responsibility of
45 * broadcasting the frames to all listening mac80211_hwsim radio
46 * interfaces.
47 *
48 * For more technical details, see the corresponding command descriptions
49 * below.
50 */
51
52/**
53 * enum hwsim_commands - supported hwsim commands
54 *
55 * @HWSIM_CMD_UNSPEC: unspecified command to catch errors
56 *
57 * @HWSIM_CMD_REGISTER: request to register and received all broadcasted
58 * frames by any mac80211_hwsim radio device.
59 * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user
60 * space, uses:
61 * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER,
62 * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE,
63 * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
64 * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
65 * kernel, uses:
66 * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
67 * %HWSIM_ATTR_TX_INFO, %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
68 * @__HWSIM_CMD_MAX: enum limit
69 */
70enum {
71 HWSIM_CMD_UNSPEC,
72 HWSIM_CMD_REGISTER,
73 HWSIM_CMD_FRAME,
74 HWSIM_CMD_TX_INFO_FRAME,
75 __HWSIM_CMD_MAX,
76};
77#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1)
78
79/**
80 * enum hwsim_attrs - hwsim netlink attributes
81 *
82 * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors
83 *
84 * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that
85 * the frame is broadcasted to
86 * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that
87 * the frame was broadcasted from
88 * @HWSIM_ATTR_FRAME: Data array
89 * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process
90 properly the frame at user space
91 * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user
92 space
93 * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user
94 space
95 * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array
96 * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame
97 * @__HWSIM_ATTR_MAX: enum limit
98 */
99
100
101enum {
102 HWSIM_ATTR_UNSPEC,
103 HWSIM_ATTR_ADDR_RECEIVER,
104 HWSIM_ATTR_ADDR_TRANSMITTER,
105 HWSIM_ATTR_FRAME,
106 HWSIM_ATTR_FLAGS,
107 HWSIM_ATTR_RX_RATE,
108 HWSIM_ATTR_SIGNAL,
109 HWSIM_ATTR_TX_INFO,
110 HWSIM_ATTR_COOKIE,
111 __HWSIM_ATTR_MAX,
112};
113#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
114
115/**
116 * struct hwsim_tx_rate - rate selection/status
117 *
118 * @idx: rate index to attempt to send with
119 * @count: number of tries in this rate before going to the next rate
120 *
121 * A value of -1 for @idx indicates an invalid rate and, if used
122 * in an array of retry rates, that no more rates should be tried.
123 *
124 * When used for transmit status reporting, the driver should
125 * always report the rate and number of retries used.
126 *
127 */
128struct hwsim_tx_rate {
129 s8 idx;
130 u8 count;
131} __packed;
132
133#endif /* __MAC80211_HWSIM_H */
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
4 * Copyright (c) 2008, Jouni Malinen <j@w1.fi>
5 * Copyright (c) 2011, Javier Lopez <jlopex@gmail.com>
6 */
7
8#ifndef __MAC80211_HWSIM_H
9#define __MAC80211_HWSIM_H
10
11/**
12 * enum hwsim_tx_control_flags - flags to describe transmission info/status
13 *
14 * These flags are used to give the wmediumd extra information in order to
15 * modify its behavior for each frame
16 *
17 * @HWSIM_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
18 * @HWSIM_TX_CTL_NO_ACK: tell the wmediumd not to wait for an ack
19 * @HWSIM_TX_STAT_ACK: Frame was acknowledged
20 *
21 */
22enum hwsim_tx_control_flags {
23 HWSIM_TX_CTL_REQ_TX_STATUS = BIT(0),
24 HWSIM_TX_CTL_NO_ACK = BIT(1),
25 HWSIM_TX_STAT_ACK = BIT(2),
26};
27
28/**
29 * DOC: Frame transmission/registration support
30 *
31 * Frame transmission and registration support exists to allow userspace
32 * entities such as wmediumd to receive and process all broadcasted
33 * frames from a mac80211_hwsim radio device.
34 *
35 * This allow user space applications to decide if the frame should be
36 * dropped or not and implement a wireless medium simulator at user space.
37 *
38 * Registration is done by sending a register message to the driver and
39 * will be automatically unregistered if the user application doesn't
40 * responds to sent frames.
41 * Once registered the user application has to take responsibility of
42 * broadcasting the frames to all listening mac80211_hwsim radio
43 * interfaces.
44 *
45 * For more technical details, see the corresponding command descriptions
46 * below.
47 */
48
49/**
50 * enum hwsim_commands - supported hwsim commands
51 *
52 * @HWSIM_CMD_UNSPEC: unspecified command to catch errors
53 *
54 * @HWSIM_CMD_REGISTER: request to register and received all broadcasted
55 * frames by any mac80211_hwsim radio device.
56 * @HWSIM_CMD_FRAME: send/receive a broadcasted frame from/to kernel/user
57 * space, uses:
58 * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_ADDR_RECEIVER,
59 * %HWSIM_ATTR_FRAME, %HWSIM_ATTR_FLAGS, %HWSIM_ATTR_RX_RATE,
60 * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE, %HWSIM_ATTR_FREQ (optional)
61 * @HWSIM_CMD_TX_INFO_FRAME: Transmission info report from user space to
62 * kernel, uses:
63 * %HWSIM_ATTR_ADDR_TRANSMITTER, %HWSIM_ATTR_FLAGS,
64 * %HWSIM_ATTR_TX_INFO, %WSIM_ATTR_TX_INFO_FLAGS,
65 * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE
66 * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters,
67 * returns the radio ID (>= 0) or negative on errors, if successful
68 * then multicast the result, uses optional parameter:
69 * %HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE,
70 * %HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS,
71 * %HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX,
72 * %HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG,
73 * %HWSIM_ATTR_PERM_ADDR
74 * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
75 * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses:
76 * %HWSIM_ATTR_RADIO_ID
77 * @__HWSIM_CMD_MAX: enum limit
78 */
79enum {
80 HWSIM_CMD_UNSPEC,
81 HWSIM_CMD_REGISTER,
82 HWSIM_CMD_FRAME,
83 HWSIM_CMD_TX_INFO_FRAME,
84 HWSIM_CMD_NEW_RADIO,
85 HWSIM_CMD_DEL_RADIO,
86 HWSIM_CMD_GET_RADIO,
87 __HWSIM_CMD_MAX,
88};
89#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1)
90
91#define HWSIM_CMD_CREATE_RADIO HWSIM_CMD_NEW_RADIO
92#define HWSIM_CMD_DESTROY_RADIO HWSIM_CMD_DEL_RADIO
93
94/**
95 * enum hwsim_attrs - hwsim netlink attributes
96 *
97 * @HWSIM_ATTR_UNSPEC: unspecified attribute to catch errors
98 *
99 * @HWSIM_ATTR_ADDR_RECEIVER: MAC address of the radio device that
100 * the frame is broadcasted to
101 * @HWSIM_ATTR_ADDR_TRANSMITTER: MAC address of the radio device that
102 * the frame was broadcasted from
103 * @HWSIM_ATTR_FRAME: Data array
104 * @HWSIM_ATTR_FLAGS: mac80211 transmission flags, used to process
105 properly the frame at user space
106 * @HWSIM_ATTR_RX_RATE: estimated rx rate index for this frame at user
107 space
108 * @HWSIM_ATTR_SIGNAL: estimated RX signal for this frame at user
109 space
110 * @HWSIM_ATTR_TX_INFO: ieee80211_tx_rate array
111 * @HWSIM_ATTR_COOKIE: sk_buff cookie to identify the frame
112 * @HWSIM_ATTR_CHANNELS: u32 attribute used with the %HWSIM_CMD_CREATE_RADIO
113 * command giving the number of channels supported by the new radio
114 * @HWSIM_ATTR_RADIO_ID: u32 attribute used with %HWSIM_CMD_DESTROY_RADIO
115 * only to destroy a radio
116 * @HWSIM_ATTR_REG_HINT_ALPHA2: alpha2 for regulatoro driver hint
117 * (nla string, length 2)
118 * @HWSIM_ATTR_REG_CUSTOM_REG: custom regulatory domain index (u32 attribute)
119 * @HWSIM_ATTR_REG_STRICT_REG: request REGULATORY_STRICT_REG (flag attribute)
120 * @HWSIM_ATTR_SUPPORT_P2P_DEVICE: support P2P Device virtual interface (flag)
121 * @HWSIM_ATTR_USE_CHANCTX: used with the %HWSIM_CMD_CREATE_RADIO
122 * command to force use of channel contexts even when only a
123 * single channel is supported
124 * @HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE: used with the %HWSIM_CMD_CREATE_RADIO
125 * command to force radio removal when process that created the radio dies
126 * @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666
127 * @HWSIM_ATTR_NO_VIF: Do not create vif (wlanX) when creating radio.
128 * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
129 * @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding
130 * rates of %HWSIM_ATTR_TX_INFO
131 * @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio
132 * @HWSIM_ATTR_IFTYPE_SUPPORT: u32 attribute of supported interface types bits
133 * @HWSIM_ATTR_CIPHER_SUPPORT: u32 array of supported cipher types
134 * @__HWSIM_ATTR_MAX: enum limit
135 */
136
137
138enum {
139 HWSIM_ATTR_UNSPEC,
140 HWSIM_ATTR_ADDR_RECEIVER,
141 HWSIM_ATTR_ADDR_TRANSMITTER,
142 HWSIM_ATTR_FRAME,
143 HWSIM_ATTR_FLAGS,
144 HWSIM_ATTR_RX_RATE,
145 HWSIM_ATTR_SIGNAL,
146 HWSIM_ATTR_TX_INFO,
147 HWSIM_ATTR_COOKIE,
148 HWSIM_ATTR_CHANNELS,
149 HWSIM_ATTR_RADIO_ID,
150 HWSIM_ATTR_REG_HINT_ALPHA2,
151 HWSIM_ATTR_REG_CUSTOM_REG,
152 HWSIM_ATTR_REG_STRICT_REG,
153 HWSIM_ATTR_SUPPORT_P2P_DEVICE,
154 HWSIM_ATTR_USE_CHANCTX,
155 HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE,
156 HWSIM_ATTR_RADIO_NAME,
157 HWSIM_ATTR_NO_VIF,
158 HWSIM_ATTR_FREQ,
159 HWSIM_ATTR_PAD,
160 HWSIM_ATTR_TX_INFO_FLAGS,
161 HWSIM_ATTR_PERM_ADDR,
162 HWSIM_ATTR_IFTYPE_SUPPORT,
163 HWSIM_ATTR_CIPHER_SUPPORT,
164 __HWSIM_ATTR_MAX,
165};
166#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)
167
168/**
169 * struct hwsim_tx_rate - rate selection/status
170 *
171 * @idx: rate index to attempt to send with
172 * @count: number of tries in this rate before going to the next rate
173 *
174 * A value of -1 for @idx indicates an invalid rate and, if used
175 * in an array of retry rates, that no more rates should be tried.
176 *
177 * When used for transmit status reporting, the driver should
178 * always report the rate and number of retries used.
179 *
180 */
181struct hwsim_tx_rate {
182 s8 idx;
183 u8 count;
184} __packed;
185
186/**
187 * enum hwsim_tx_rate_flags - per-rate flags set by the rate control algorithm.
188 * Inspired by structure mac80211_rate_control_flags. New flags may be
189 * appended, but old flags not deleted, to keep compatibility for
190 * userspace.
191 *
192 * These flags are set by the Rate control algorithm for each rate during tx,
193 * in the @flags member of struct ieee80211_tx_rate.
194 *
195 * @MAC80211_HWSIM_TX_RC_USE_RTS_CTS: Use RTS/CTS exchange for this rate.
196 * @MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT: CTS-to-self protection is required.
197 * This is set if the current BSS requires ERP protection.
198 * @MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
199 * @MAC80211_HWSIM_TX_RC_MCS: HT rate.
200 * @MAC80211_HWSIM_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is
201 * split into a higher 4 bits (Nss) and lower 4 bits (MCS number)
202 * @MAC80211_HWSIM_TX_RC_GREEN_FIELD: Indicates whether this rate should be used
203 * in Greenfield mode.
204 * @MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be
205 * 40 MHz.
206 * @MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
207 * @MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
208 * (80+80 isn't supported yet)
209 * @MAC80211_HWSIM_TX_RC_DUP_DATA: The frame should be transmitted on both of
210 * the adjacent 20 MHz channels, if the current channel type is
211 * NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
212 * @MAC80211_HWSIM_TX_RC_SHORT_GI: Short Guard interval should be used for this
213 * rate.
214 */
215enum hwsim_tx_rate_flags {
216 MAC80211_HWSIM_TX_RC_USE_RTS_CTS = BIT(0),
217 MAC80211_HWSIM_TX_RC_USE_CTS_PROTECT = BIT(1),
218 MAC80211_HWSIM_TX_RC_USE_SHORT_PREAMBLE = BIT(2),
219
220 /* rate index is an HT/VHT MCS instead of an index */
221 MAC80211_HWSIM_TX_RC_MCS = BIT(3),
222 MAC80211_HWSIM_TX_RC_GREEN_FIELD = BIT(4),
223 MAC80211_HWSIM_TX_RC_40_MHZ_WIDTH = BIT(5),
224 MAC80211_HWSIM_TX_RC_DUP_DATA = BIT(6),
225 MAC80211_HWSIM_TX_RC_SHORT_GI = BIT(7),
226 MAC80211_HWSIM_TX_RC_VHT_MCS = BIT(8),
227 MAC80211_HWSIM_TX_RC_80_MHZ_WIDTH = BIT(9),
228 MAC80211_HWSIM_TX_RC_160_MHZ_WIDTH = BIT(10),
229};
230
231/**
232 * struct hwsim_tx_rate - rate selection/status
233 *
234 * @idx: rate index to attempt to send with
235 * @count: number of tries in this rate before going to the next rate
236 *
237 * A value of -1 for @idx indicates an invalid rate and, if used
238 * in an array of retry rates, that no more rates should be tried.
239 *
240 * When used for transmit status reporting, the driver should
241 * always report the rate and number of retries used.
242 *
243 */
244struct hwsim_tx_rate_flag {
245 s8 idx;
246 u16 flags;
247} __packed;
248#endif /* __MAC80211_HWSIM_H */