Loading...
Note: File does not exist in v5.4.
1/******************************************************************************
2 *
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
5 *
6 * GPL LICENSE SUMMARY
7 *
8 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
13 *
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22 * USA
23 *
24 * The full GNU General Public License is included in this distribution
25 * in the file called LICENSE.GPL.
26 *
27 * Contact Information:
28 * Intel Linux Wireless <ilw@linux.intel.com>
29 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30 *
31 * BSD LICENSE
32 *
33 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34 * All rights reserved.
35 *
36 * Redistribution and use in source and binary forms, with or without
37 * modification, are permitted provided that the following conditions
38 * are met:
39 *
40 * * Redistributions of source code must retain the above copyright
41 * notice, this list of conditions and the following disclaimer.
42 * * Redistributions in binary form must reproduce the above copyright
43 * notice, this list of conditions and the following disclaimer in
44 * the documentation and/or other materials provided with the
45 * distribution.
46 * * Neither the name Intel Corporation nor the names of its
47 * contributors may be used to endorse or promote products derived
48 * from this software without specific prior written permission.
49 *
50 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61 *****************************************************************************/
62
63#ifndef __iwl_prph_h__
64#define __iwl_prph_h__
65
66/*
67 * Registers in this file are internal, not PCI bus memory mapped.
68 * Driver accesses these via HBUS_TARG_PRPH_* registers.
69 */
70#define PRPH_BASE (0x00000)
71#define PRPH_END (0xFFFFF)
72
73/* APMG (power management) constants */
74#define APMG_BASE (PRPH_BASE + 0x3000)
75#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
76#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
77#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
78#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
79#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
80#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
81#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
82#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
83#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
84#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)
85
86#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
87#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
88#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
89
90#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
91#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
92#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
93#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
94#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
95#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
96#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
97
98#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
99
100/**
101 * Tx Scheduler
102 *
103 * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
104 * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
105 * host DRAM. It steers each frame's Tx command (which contains the frame
106 * data) into one of up to 7 prioritized Tx DMA FIFO channels within the
107 * device. A queue maps to only one (selectable by driver) Tx DMA channel,
108 * but one DMA channel may take input from several queues.
109 *
110 * Tx DMA FIFOs have dedicated purposes.
111 *
112 * For 5000 series and up, they are used differently
113 * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
114 *
115 * 0 -- EDCA BK (background) frames, lowest priority
116 * 1 -- EDCA BE (best effort) frames, normal priority
117 * 2 -- EDCA VI (video) frames, higher priority
118 * 3 -- EDCA VO (voice) and management frames, highest priority
119 * 4 -- unused
120 * 5 -- unused
121 * 6 -- unused
122 * 7 -- Commands
123 *
124 * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
125 * In addition, driver can map the remaining queues to Tx DMA/FIFO
126 * channels 0-3 to support 11n aggregation via EDCA DMA channels.
127 *
128 * The driver sets up each queue to work in one of two modes:
129 *
130 * 1) Scheduler-Ack, in which the scheduler automatically supports a
131 * block-ack (BA) window of up to 64 TFDs. In this mode, each queue
132 * contains TFDs for a unique combination of Recipient Address (RA)
133 * and Traffic Identifier (TID), that is, traffic of a given
134 * Quality-Of-Service (QOS) priority, destined for a single station.
135 *
136 * In scheduler-ack mode, the scheduler keeps track of the Tx status of
137 * each frame within the BA window, including whether it's been transmitted,
138 * and whether it's been acknowledged by the receiving station. The device
139 * automatically processes block-acks received from the receiving STA,
140 * and reschedules un-acked frames to be retransmitted (successful
141 * Tx completion may end up being out-of-order).
142 *
143 * The driver must maintain the queue's Byte Count table in host DRAM
144 * for this mode.
145 * This mode does not support fragmentation.
146 *
147 * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
148 * The device may automatically retry Tx, but will retry only one frame
149 * at a time, until receiving ACK from receiving station, or reaching
150 * retry limit and giving up.
151 *
152 * The command queue (#4/#9) must use this mode!
153 * This mode does not require use of the Byte Count table in host DRAM.
154 *
155 * Driver controls scheduler operation via 3 means:
156 * 1) Scheduler registers
157 * 2) Shared scheduler data base in internal SRAM
158 * 3) Shared data in host DRAM
159 *
160 * Initialization:
161 *
162 * When loading, driver should allocate memory for:
163 * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs.
164 * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory
165 * (1024 bytes for each queue).
166 *
167 * After receiving "Alive" response from uCode, driver must initialize
168 * the scheduler (especially for queue #4/#9, the command queue, otherwise
169 * the driver can't issue commands!):
170 */
171#define SCD_MEM_LOWER_BOUND (0x0000)
172
173/**
174 * Max Tx window size is the max number of contiguous TFDs that the scheduler
175 * can keep track of at one time when creating block-ack chains of frames.
176 * Note that "64" matches the number of ack bits in a block-ack packet.
177 */
178#define SCD_WIN_SIZE 64
179#define SCD_FRAME_LIMIT 64
180
181#define SCD_TXFIFO_POS_TID (0)
182#define SCD_TXFIFO_POS_RA (4)
183#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
184
185/* agn SCD */
186#define SCD_QUEUE_STTS_REG_POS_TXF (0)
187#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
188#define SCD_QUEUE_STTS_REG_POS_WSL (4)
189#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
190#define SCD_QUEUE_STTS_REG_MSK (0x00FF0000)
191
192#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
193#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
194#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
195#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
196#define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
197#define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
198#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
199#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
200
201/* Context Data */
202#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600)
203#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
204
205/* Tx status */
206#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
207#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
208
209/* Translation Data */
210#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
211#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808)
212
213#define SCD_CONTEXT_QUEUE_OFFSET(x)\
214 (SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))
215
216#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \
217 ((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)
218
219#define SCD_QUEUECHAIN_SEL_ALL(priv) \
220 (((1<<(priv)->hw_params.max_txq_num) - 1) &\
221 (~(1<<(priv)->cmd_queue)))
222
223#define SCD_BASE (PRPH_BASE + 0xa02c00)
224
225#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0)
226#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8)
227#define SCD_AIT (SCD_BASE + 0x0c)
228#define SCD_TXFACT (SCD_BASE + 0x10)
229#define SCD_ACTIVE (SCD_BASE + 0x14)
230#define SCD_QUEUE_WRPTR(x) (SCD_BASE + 0x18 + (x) * 4)
231#define SCD_QUEUE_RDPTR(x) (SCD_BASE + 0x68 + (x) * 4)
232#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
233#define SCD_AGGR_SEL (SCD_BASE + 0x248)
234#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)
235#define SCD_QUEUE_STATUS_BITS(x) (SCD_BASE + 0x10c + (x) * 4)
236
237/*********************** END TX SCHEDULER *************************************/
238
239#endif /* __iwl_prph_h__ */