Loading...
Note: File does not exist in v3.1.
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3 bool
4 depends on DRM
5 help
6 Panel registration and lookup framework.
7
8menu "Display Panels"
9 depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12 tristate "ARM Versatile panel driver"
13 depends on OF
14 depends on MFD_SYSCON
15 select VIDEOMODE_HELPERS
16 help
17 This driver supports the ARM Versatile panels connected to ARM
18 reference designs. The panel is detected using special registers
19 in the Versatile family syscon registers.
20
21config DRM_PANEL_LVDS
22 tristate "Generic LVDS panel driver"
23 depends on OF
24 depends on BACKLIGHT_CLASS_DEVICE
25 select VIDEOMODE_HELPERS
26 help
27 This driver supports LVDS panels that don't require device-specific
28 handling of power supplies or control signals. It implements automatic
29 backlight handling if the panel is attached to a backlight controller.
30
31config DRM_PANEL_SIMPLE
32 tristate "support for simple panels"
33 depends on OF
34 depends on BACKLIGHT_CLASS_DEVICE
35 select VIDEOMODE_HELPERS
36 help
37 DRM panel driver for dumb panels that need at most a regulator and
38 a GPIO to be powered up. Optionally a backlight can be attached so
39 that it can be automatically turned off when the panel goes into a
40 low power state.
41
42config DRM_PANEL_FEIYANG_FY07024DI26A30D
43 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
44 depends on OF
45 depends on DRM_MIPI_DSI
46 depends on BACKLIGHT_CLASS_DEVICE
47 help
48 Say Y if you want to enable support for panels based on the
49 Feiyang FY07024DI26A30-D MIPI-DSI interface.
50
51config DRM_PANEL_ILITEK_IL9322
52 tristate "Ilitek ILI9322 320x240 QVGA panels"
53 depends on OF && SPI
54 select REGMAP
55 help
56 Say Y here if you want to enable support for Ilitek IL9322
57 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
58
59config DRM_PANEL_ILITEK_ILI9881C
60 tristate "Ilitek ILI9881C-based panels"
61 depends on OF
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
64 help
65 Say Y if you want to enable support for panels based on the
66 Ilitek ILI9881c controller.
67
68config DRM_PANEL_INNOLUX_P079ZCA
69 tristate "Innolux P079ZCA panel"
70 depends on OF
71 depends on DRM_MIPI_DSI
72 depends on BACKLIGHT_CLASS_DEVICE
73 help
74 Say Y here if you want to enable support for Innolux P079ZCA
75 TFT-LCD modules. The panel has a 1024x768 resolution and uses
76 24 bit RGB per pixel. It provides a MIPI DSI interface to
77 the host and has a built-in LED backlight.
78
79config DRM_PANEL_JDI_LT070ME05000
80 tristate "JDI LT070ME05000 WUXGA DSI panel"
81 depends on OF
82 depends on DRM_MIPI_DSI
83 depends on BACKLIGHT_CLASS_DEVICE
84 help
85 Say Y here if you want to enable support for JDI DSI video mode
86 panel as found in Google Nexus 7 (2013) devices.
87 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
88 24 bit per pixel.
89
90config DRM_PANEL_KINGDISPLAY_KD097D04
91 tristate "Kingdisplay kd097d04 panel"
92 depends on OF
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
95 help
96 Say Y here if you want to enable support for Kingdisplay kd097d04
97 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
98 24 bit RGB per pixel. It provides a MIPI DSI interface to
99 the host and has a built-in LED backlight.
100
101config DRM_PANEL_SAMSUNG_LD9040
102 tristate "Samsung LD9040 RGB/SPI panel"
103 depends on OF && SPI
104 select VIDEOMODE_HELPERS
105
106config DRM_PANEL_LG_LB035Q02
107 tristate "LG LB035Q024573 RGB panel"
108 depends on GPIOLIB && OF && SPI
109 help
110 Say Y here if you want to enable support for the LB035Q02 RGB panel
111 (found on the Gumstix Overo Palo35 board). To compile this driver as
112 a module, choose M here.
113
114config DRM_PANEL_LG_LG4573
115 tristate "LG4573 RGB/SPI panel"
116 depends on OF && SPI
117 select VIDEOMODE_HELPERS
118 help
119 Say Y here if you want to enable support for LG4573 RGB panel.
120 To compile this driver as a module, choose M here.
121
122config DRM_PANEL_NEC_NL8048HL11
123 tristate "NEC NL8048HL11 RGB panel"
124 depends on GPIOLIB && OF && SPI
125 help
126 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
127 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
128 as a module, choose M here.
129
130config DRM_PANEL_NOVATEK_NT39016
131 tristate "Novatek NT39016 RGB/SPI panel"
132 depends on OF && SPI
133 depends on BACKLIGHT_CLASS_DEVICE
134 select REGMAP_SPI
135 help
136 Say Y here if you want to enable support for the panels built
137 around the Novatek NT39016 display controller.
138
139config DRM_PANEL_OLIMEX_LCD_OLINUXINO
140 tristate "Olimex LCD-OLinuXino panel"
141 depends on OF
142 depends on I2C
143 depends on BACKLIGHT_CLASS_DEVICE
144 help
145 The panel is used with different sizes LCDs, from 480x272 to
146 1280x800, and 24 bit per pixel.
147
148 Say Y here if you want to enable support for Olimex Ltd.
149 LCD-OLinuXino panel.
150
151config DRM_PANEL_ORISETECH_OTM8009A
152 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
153 depends on OF
154 depends on DRM_MIPI_DSI
155 depends on BACKLIGHT_CLASS_DEVICE
156 help
157 Say Y here if you want to enable support for Orise Technology
158 otm8009a 480x800 dsi 2dl panel.
159
160config DRM_PANEL_OSD_OSD101T2587_53TS
161 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
162 depends on OF
163 depends on DRM_MIPI_DSI
164 depends on BACKLIGHT_CLASS_DEVICE
165 help
166 Say Y here if you want to enable support for One Stop Displays
167 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
168
169config DRM_PANEL_PANASONIC_VVX10F034N00
170 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
171 depends on OF
172 depends on DRM_MIPI_DSI
173 depends on BACKLIGHT_CLASS_DEVICE
174 help
175 Say Y here if you want to enable support for Panasonic VVX10F034N00
176 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
177 Xperia Z2 tablets
178
179config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
180 tristate "Raspberry Pi 7-inch touchscreen panel"
181 depends on DRM_MIPI_DSI
182 help
183 Say Y here if you want to enable support for the Raspberry
184 Pi 7" Touchscreen. To compile this driver as a module,
185 choose M here.
186
187config DRM_PANEL_RAYDIUM_RM67191
188 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
189 depends on OF
190 depends on DRM_MIPI_DSI
191 depends on BACKLIGHT_CLASS_DEVICE
192 help
193 Say Y here if you want to enable support for Raydium RM67191 FHD
194 (1080x1920) DSI panel.
195
196config DRM_PANEL_RAYDIUM_RM68200
197 tristate "Raydium RM68200 720x1280 DSI video mode panel"
198 depends on OF
199 depends on DRM_MIPI_DSI
200 depends on BACKLIGHT_CLASS_DEVICE
201 help
202 Say Y here if you want to enable support for Raydium RM68200
203 720x1280 DSI video mode panel.
204
205config DRM_PANEL_ROCKTECH_JH057N00900
206 tristate "Rocktech JH057N00900 MIPI touchscreen panel"
207 depends on OF
208 depends on DRM_MIPI_DSI
209 depends on BACKLIGHT_CLASS_DEVICE
210 help
211 Say Y here if you want to enable support for Rocktech JH057N00900
212 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
213 resolution of 720x1440 pixels, a built in backlight and touch
214 controller.
215 Touch input support is provided by the goodix driver and needs to be
216 selected separately.
217
218config DRM_PANEL_RONBO_RB070D30
219 tristate "Ronbo Electronics RB070D30 panel"
220 depends on OF
221 depends on DRM_MIPI_DSI
222 depends on BACKLIGHT_CLASS_DEVICE
223 help
224 Say Y here if you want to enable support for Ronbo Electronics
225 RB070D30 1024x600 DSI panel.
226
227config DRM_PANEL_SAMSUNG_S6D16D0
228 tristate "Samsung S6D16D0 DSI video mode panel"
229 depends on OF
230 depends on DRM_MIPI_DSI
231 select VIDEOMODE_HELPERS
232
233config DRM_PANEL_SAMSUNG_S6E3HA2
234 tristate "Samsung S6E3HA2 DSI video mode panel"
235 depends on OF
236 depends on DRM_MIPI_DSI
237 depends on BACKLIGHT_CLASS_DEVICE
238 select VIDEOMODE_HELPERS
239
240config DRM_PANEL_SAMSUNG_S6E63J0X03
241 tristate "Samsung S6E63J0X03 DSI command mode panel"
242 depends on OF
243 depends on DRM_MIPI_DSI
244 depends on BACKLIGHT_CLASS_DEVICE
245 select VIDEOMODE_HELPERS
246
247config DRM_PANEL_SAMSUNG_S6E63M0
248 tristate "Samsung S6E63M0 RGB/SPI panel"
249 depends on OF
250 depends on SPI
251 depends on BACKLIGHT_CLASS_DEVICE
252 help
253 Say Y here if you want to enable support for Samsung S6E63M0
254 AMOLED LCD panel.
255
256config DRM_PANEL_SAMSUNG_S6E8AA0
257 tristate "Samsung S6E8AA0 DSI video mode panel"
258 depends on OF
259 select DRM_MIPI_DSI
260 select VIDEOMODE_HELPERS
261
262config DRM_PANEL_SEIKO_43WVF1G
263 tristate "Seiko 43WVF1G panel"
264 depends on OF
265 depends on BACKLIGHT_CLASS_DEVICE
266 select VIDEOMODE_HELPERS
267 help
268 Say Y here if you want to enable support for the Seiko
269 43WVF1G controller for 800x480 LCD panels
270
271config DRM_PANEL_SHARP_LQ101R1SX01
272 tristate "Sharp LQ101R1SX01 panel"
273 depends on OF
274 depends on DRM_MIPI_DSI
275 depends on BACKLIGHT_CLASS_DEVICE
276 help
277 Say Y here if you want to enable support for Sharp LQ101R1SX01
278 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
279 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
280 the host and has a built-in LED backlight.
281
282 To compile this driver as a module, choose M here: the module
283 will be called panel-sharp-lq101r1sx01.
284
285config DRM_PANEL_SHARP_LS037V7DW01
286 tristate "Sharp LS037V7DW01 VGA LCD panel"
287 depends on GPIOLIB && OF && REGULATOR
288 help
289 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
290 (480x640) LCD panel (found on the TI SDP3430 board).
291
292config DRM_PANEL_SHARP_LS043T1LE01
293 tristate "Sharp LS043T1LE01 qHD video mode panel"
294 depends on OF
295 depends on DRM_MIPI_DSI
296 depends on BACKLIGHT_CLASS_DEVICE
297 help
298 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
299 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
300
301config DRM_PANEL_SITRONIX_ST7701
302 tristate "Sitronix ST7701 panel driver"
303 depends on OF
304 depends on DRM_MIPI_DSI
305 depends on BACKLIGHT_CLASS_DEVICE
306 help
307 Say Y here if you want to enable support for the Sitronix
308 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
309 system interfaces.
310
311config DRM_PANEL_SITRONIX_ST7789V
312 tristate "Sitronix ST7789V panel"
313 depends on OF && SPI
314 depends on BACKLIGHT_CLASS_DEVICE
315 help
316 Say Y here if you want to enable support for the Sitronix
317 ST7789V controller for 240x320 LCD panels
318
319config DRM_PANEL_SONY_ACX565AKM
320 tristate "Sony ACX565AKM panel"
321 depends on GPIOLIB && OF && SPI
322 depends on BACKLIGHT_CLASS_DEVICE
323 help
324 Say Y here if you want to enable support for the Sony ACX565AKM
325 800x600 3.5" panel (found on the Nokia N900).
326
327config DRM_PANEL_TPO_TD028TTEC1
328 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
329 depends on OF && SPI
330 depends on BACKLIGHT_CLASS_DEVICE
331 help
332 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
333 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
334
335config DRM_PANEL_TPO_TD043MTEA1
336 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
337 depends on GPIOLIB && OF && REGULATOR && SPI
338 help
339 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
340 4.3" panel (found on the OMAP3 Pandora board).
341
342config DRM_PANEL_TPO_TPG110
343 tristate "TPO TPG 800x400 panel"
344 depends on OF && SPI && GPIOLIB
345 depends on BACKLIGHT_CLASS_DEVICE
346 help
347 Say Y here if you want to enable support for TPO TPG110
348 400CH LTPS TFT LCD Single Chip Digital Driver for up to
349 800x400 LCD panels.
350
351config DRM_PANEL_TRULY_NT35597_WQXGA
352 tristate "Truly WQXGA"
353 depends on OF
354 depends on DRM_MIPI_DSI
355 help
356 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
357 Video Mode panel
358endmenu