Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: MIT
2/*
3 * Copyright 2018 Noralf Trønnes
4 * Copyright (c) 2006-2009 Red Hat Inc.
5 * Copyright (c) 2006-2008 Intel Corporation
6 * Jesse Barnes <jesse.barnes@intel.com>
7 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
8 */
9
10#include <linux/module.h>
11#include <linux/mutex.h>
12#include <linux/slab.h>
13
14#include <drm/drm_atomic.h>
15#include <drm/drm_client.h>
16#include <drm/drm_connector.h>
17#include <drm/drm_crtc.h>
18#include <drm/drm_device.h>
19#include <drm/drm_drv.h>
20#include <drm/drm_encoder.h>
21#include <drm/drm_print.h>
22
23#include "drm_crtc_internal.h"
24#include "drm_internal.h"
25
26#define DRM_CLIENT_MAX_CLONED_CONNECTORS 8
27
28struct drm_client_offset {
29 int x, y;
30};
31
32int drm_client_modeset_create(struct drm_client_dev *client)
33{
34 struct drm_device *dev = client->dev;
35 unsigned int num_crtc = dev->mode_config.num_crtc;
36 unsigned int max_connector_count = 1;
37 struct drm_mode_set *modeset;
38 struct drm_crtc *crtc;
39 unsigned int i = 0;
40
41 /* Add terminating zero entry to enable index less iteration */
42 client->modesets = kcalloc(num_crtc + 1, sizeof(*client->modesets), GFP_KERNEL);
43 if (!client->modesets)
44 return -ENOMEM;
45
46 mutex_init(&client->modeset_mutex);
47
48 drm_for_each_crtc(crtc, dev)
49 client->modesets[i++].crtc = crtc;
50
51 /* Cloning is only supported in the single crtc case. */
52 if (num_crtc == 1)
53 max_connector_count = DRM_CLIENT_MAX_CLONED_CONNECTORS;
54
55 for (modeset = client->modesets; modeset->crtc; modeset++) {
56 modeset->connectors = kcalloc(max_connector_count,
57 sizeof(*modeset->connectors), GFP_KERNEL);
58 if (!modeset->connectors)
59 goto err_free;
60 }
61
62 return 0;
63
64err_free:
65 drm_client_modeset_free(client);
66
67 return -ENOMEM;
68}
69
70static void drm_client_modeset_release(struct drm_client_dev *client)
71{
72 struct drm_mode_set *modeset;
73 unsigned int i;
74
75 drm_client_for_each_modeset(modeset, client) {
76 drm_mode_destroy(client->dev, modeset->mode);
77 modeset->mode = NULL;
78 modeset->fb = NULL;
79
80 for (i = 0; i < modeset->num_connectors; i++) {
81 drm_connector_put(modeset->connectors[i]);
82 modeset->connectors[i] = NULL;
83 }
84 modeset->num_connectors = 0;
85 }
86}
87
88void drm_client_modeset_free(struct drm_client_dev *client)
89{
90 struct drm_mode_set *modeset;
91
92 mutex_lock(&client->modeset_mutex);
93
94 drm_client_modeset_release(client);
95
96 drm_client_for_each_modeset(modeset, client)
97 kfree(modeset->connectors);
98
99 mutex_unlock(&client->modeset_mutex);
100
101 mutex_destroy(&client->modeset_mutex);
102 kfree(client->modesets);
103}
104
105static struct drm_mode_set *
106drm_client_find_modeset(struct drm_client_dev *client, struct drm_crtc *crtc)
107{
108 struct drm_mode_set *modeset;
109
110 drm_client_for_each_modeset(modeset, client)
111 if (modeset->crtc == crtc)
112 return modeset;
113
114 return NULL;
115}
116
117static struct drm_display_mode *
118drm_connector_has_preferred_mode(struct drm_connector *connector, int width, int height)
119{
120 struct drm_display_mode *mode;
121
122 list_for_each_entry(mode, &connector->modes, head) {
123 if (mode->hdisplay > width ||
124 mode->vdisplay > height)
125 continue;
126 if (mode->type & DRM_MODE_TYPE_PREFERRED)
127 return mode;
128 }
129 return NULL;
130}
131
132static struct drm_display_mode *
133drm_connector_pick_cmdline_mode(struct drm_connector *connector)
134{
135 struct drm_cmdline_mode *cmdline_mode;
136 struct drm_display_mode *mode;
137 bool prefer_non_interlace;
138
139 cmdline_mode = &connector->cmdline_mode;
140 if (cmdline_mode->specified == false)
141 return NULL;
142
143 /* attempt to find a matching mode in the list of modes
144 * we have gotten so far, if not add a CVT mode that conforms
145 */
146 if (cmdline_mode->rb || cmdline_mode->margins)
147 goto create_mode;
148
149 prefer_non_interlace = !cmdline_mode->interlace;
150again:
151 list_for_each_entry(mode, &connector->modes, head) {
152 /* Check (optional) mode name first */
153 if (!strcmp(mode->name, cmdline_mode->name))
154 return mode;
155
156 /* check width/height */
157 if (mode->hdisplay != cmdline_mode->xres ||
158 mode->vdisplay != cmdline_mode->yres)
159 continue;
160
161 if (cmdline_mode->refresh_specified) {
162 if (mode->vrefresh != cmdline_mode->refresh)
163 continue;
164 }
165
166 if (cmdline_mode->interlace) {
167 if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
168 continue;
169 } else if (prefer_non_interlace) {
170 if (mode->flags & DRM_MODE_FLAG_INTERLACE)
171 continue;
172 }
173 return mode;
174 }
175
176 if (prefer_non_interlace) {
177 prefer_non_interlace = false;
178 goto again;
179 }
180
181create_mode:
182 mode = drm_mode_create_from_cmdline_mode(connector->dev, cmdline_mode);
183 if (mode)
184 list_add(&mode->head, &connector->modes);
185
186 return mode;
187}
188
189static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
190{
191 bool enable;
192
193 if (connector->display_info.non_desktop)
194 return false;
195
196 if (strict)
197 enable = connector->status == connector_status_connected;
198 else
199 enable = connector->status != connector_status_disconnected;
200
201 return enable;
202}
203
204static void drm_client_connectors_enabled(struct drm_connector **connectors,
205 unsigned int connector_count,
206 bool *enabled)
207{
208 bool any_enabled = false;
209 struct drm_connector *connector;
210 int i = 0;
211
212 for (i = 0; i < connector_count; i++) {
213 connector = connectors[i];
214 enabled[i] = drm_connector_enabled(connector, true);
215 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
216 connector->display_info.non_desktop ? "non desktop" : enabled[i] ? "yes" : "no");
217
218 any_enabled |= enabled[i];
219 }
220
221 if (any_enabled)
222 return;
223
224 for (i = 0; i < connector_count; i++)
225 enabled[i] = drm_connector_enabled(connectors[i], false);
226}
227
228static bool drm_client_target_cloned(struct drm_device *dev,
229 struct drm_connector **connectors,
230 unsigned int connector_count,
231 struct drm_display_mode **modes,
232 struct drm_client_offset *offsets,
233 bool *enabled, int width, int height)
234{
235 int count, i, j;
236 bool can_clone = false;
237 struct drm_display_mode *dmt_mode, *mode;
238
239 /* only contemplate cloning in the single crtc case */
240 if (dev->mode_config.num_crtc > 1)
241 return false;
242
243 count = 0;
244 for (i = 0; i < connector_count; i++) {
245 if (enabled[i])
246 count++;
247 }
248
249 /* only contemplate cloning if more than one connector is enabled */
250 if (count <= 1)
251 return false;
252
253 /* check the command line or if nothing common pick 1024x768 */
254 can_clone = true;
255 for (i = 0; i < connector_count; i++) {
256 if (!enabled[i])
257 continue;
258 modes[i] = drm_connector_pick_cmdline_mode(connectors[i]);
259 if (!modes[i]) {
260 can_clone = false;
261 break;
262 }
263 for (j = 0; j < i; j++) {
264 if (!enabled[j])
265 continue;
266 if (!drm_mode_match(modes[j], modes[i],
267 DRM_MODE_MATCH_TIMINGS |
268 DRM_MODE_MATCH_CLOCK |
269 DRM_MODE_MATCH_FLAGS |
270 DRM_MODE_MATCH_3D_FLAGS))
271 can_clone = false;
272 }
273 }
274
275 if (can_clone) {
276 DRM_DEBUG_KMS("can clone using command line\n");
277 return true;
278 }
279
280 /* try and find a 1024x768 mode on each connector */
281 can_clone = true;
282 dmt_mode = drm_mode_find_dmt(dev, 1024, 768, 60, false);
283
284 for (i = 0; i < connector_count; i++) {
285 if (!enabled[i])
286 continue;
287
288 list_for_each_entry(mode, &connectors[i]->modes, head) {
289 if (drm_mode_match(mode, dmt_mode,
290 DRM_MODE_MATCH_TIMINGS |
291 DRM_MODE_MATCH_CLOCK |
292 DRM_MODE_MATCH_FLAGS |
293 DRM_MODE_MATCH_3D_FLAGS))
294 modes[i] = mode;
295 }
296 if (!modes[i])
297 can_clone = false;
298 }
299
300 if (can_clone) {
301 DRM_DEBUG_KMS("can clone using 1024x768\n");
302 return true;
303 }
304 DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
305 return false;
306}
307
308static int drm_client_get_tile_offsets(struct drm_connector **connectors,
309 unsigned int connector_count,
310 struct drm_display_mode **modes,
311 struct drm_client_offset *offsets,
312 int idx,
313 int h_idx, int v_idx)
314{
315 struct drm_connector *connector;
316 int i;
317 int hoffset = 0, voffset = 0;
318
319 for (i = 0; i < connector_count; i++) {
320 connector = connectors[i];
321 if (!connector->has_tile)
322 continue;
323
324 if (!modes[i] && (h_idx || v_idx)) {
325 DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
326 connector->base.id);
327 continue;
328 }
329 if (connector->tile_h_loc < h_idx)
330 hoffset += modes[i]->hdisplay;
331
332 if (connector->tile_v_loc < v_idx)
333 voffset += modes[i]->vdisplay;
334 }
335 offsets[idx].x = hoffset;
336 offsets[idx].y = voffset;
337 DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
338 return 0;
339}
340
341static bool drm_client_target_preferred(struct drm_connector **connectors,
342 unsigned int connector_count,
343 struct drm_display_mode **modes,
344 struct drm_client_offset *offsets,
345 bool *enabled, int width, int height)
346{
347 const u64 mask = BIT_ULL(connector_count) - 1;
348 struct drm_connector *connector;
349 u64 conn_configured = 0;
350 int tile_pass = 0;
351 int i;
352
353retry:
354 for (i = 0; i < connector_count; i++) {
355 connector = connectors[i];
356
357 if (conn_configured & BIT_ULL(i))
358 continue;
359
360 if (enabled[i] == false) {
361 conn_configured |= BIT_ULL(i);
362 continue;
363 }
364
365 /* first pass over all the untiled connectors */
366 if (tile_pass == 0 && connector->has_tile)
367 continue;
368
369 if (tile_pass == 1) {
370 if (connector->tile_h_loc != 0 ||
371 connector->tile_v_loc != 0)
372 continue;
373
374 } else {
375 if (connector->tile_h_loc != tile_pass - 1 &&
376 connector->tile_v_loc != tile_pass - 1)
377 /* if this tile_pass doesn't cover any of the tiles - keep going */
378 continue;
379
380 /*
381 * find the tile offsets for this pass - need to find
382 * all tiles left and above
383 */
384 drm_client_get_tile_offsets(connectors, connector_count, modes, offsets, i,
385 connector->tile_h_loc, connector->tile_v_loc);
386 }
387 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
388 connector->base.id);
389
390 /* got for command line mode first */
391 modes[i] = drm_connector_pick_cmdline_mode(connector);
392 if (!modes[i]) {
393 DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
394 connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
395 modes[i] = drm_connector_has_preferred_mode(connector, width, height);
396 }
397 /* No preferred modes, pick one off the list */
398 if (!modes[i] && !list_empty(&connector->modes)) {
399 list_for_each_entry(modes[i], &connector->modes, head)
400 break;
401 }
402 DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
403 "none");
404 conn_configured |= BIT_ULL(i);
405 }
406
407 if ((conn_configured & mask) != mask) {
408 tile_pass++;
409 goto retry;
410 }
411 return true;
412}
413
414static bool connector_has_possible_crtc(struct drm_connector *connector,
415 struct drm_crtc *crtc)
416{
417 struct drm_encoder *encoder;
418 int i;
419
420 drm_connector_for_each_possible_encoder(connector, encoder, i) {
421 if (encoder->possible_crtcs & drm_crtc_mask(crtc))
422 return true;
423 }
424
425 return false;
426}
427
428static int drm_client_pick_crtcs(struct drm_client_dev *client,
429 struct drm_connector **connectors,
430 unsigned int connector_count,
431 struct drm_crtc **best_crtcs,
432 struct drm_display_mode **modes,
433 int n, int width, int height)
434{
435 struct drm_device *dev = client->dev;
436 struct drm_connector *connector;
437 int my_score, best_score, score;
438 struct drm_crtc **crtcs, *crtc;
439 struct drm_mode_set *modeset;
440 int o;
441
442 if (n == connector_count)
443 return 0;
444
445 connector = connectors[n];
446
447 best_crtcs[n] = NULL;
448 best_score = drm_client_pick_crtcs(client, connectors, connector_count,
449 best_crtcs, modes, n + 1, width, height);
450 if (modes[n] == NULL)
451 return best_score;
452
453 crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL);
454 if (!crtcs)
455 return best_score;
456
457 my_score = 1;
458 if (connector->status == connector_status_connected)
459 my_score++;
460 if (connector->cmdline_mode.specified)
461 my_score++;
462 if (drm_connector_has_preferred_mode(connector, width, height))
463 my_score++;
464
465 /*
466 * select a crtc for this connector and then attempt to configure
467 * remaining connectors
468 */
469 drm_client_for_each_modeset(modeset, client) {
470 crtc = modeset->crtc;
471
472 if (!connector_has_possible_crtc(connector, crtc))
473 continue;
474
475 for (o = 0; o < n; o++)
476 if (best_crtcs[o] == crtc)
477 break;
478
479 if (o < n) {
480 /* ignore cloning unless only a single crtc */
481 if (dev->mode_config.num_crtc > 1)
482 continue;
483
484 if (!drm_mode_equal(modes[o], modes[n]))
485 continue;
486 }
487
488 crtcs[n] = crtc;
489 memcpy(crtcs, best_crtcs, n * sizeof(*crtcs));
490 score = my_score + drm_client_pick_crtcs(client, connectors, connector_count,
491 crtcs, modes, n + 1, width, height);
492 if (score > best_score) {
493 best_score = score;
494 memcpy(best_crtcs, crtcs, connector_count * sizeof(*crtcs));
495 }
496 }
497
498 kfree(crtcs);
499 return best_score;
500}
501
502/* Try to read the BIOS display configuration and use it for the initial config */
503static bool drm_client_firmware_config(struct drm_client_dev *client,
504 struct drm_connector **connectors,
505 unsigned int connector_count,
506 struct drm_crtc **crtcs,
507 struct drm_display_mode **modes,
508 struct drm_client_offset *offsets,
509 bool *enabled, int width, int height)
510{
511 unsigned int count = min_t(unsigned int, connector_count, BITS_PER_LONG);
512 unsigned long conn_configured, conn_seq, mask;
513 struct drm_device *dev = client->dev;
514 int i, j;
515 bool *save_enabled;
516 bool fallback = true, ret = true;
517 int num_connectors_enabled = 0;
518 int num_connectors_detected = 0;
519 struct drm_modeset_acquire_ctx ctx;
520
521 if (!drm_drv_uses_atomic_modeset(dev))
522 return false;
523
524 save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
525 if (!save_enabled)
526 return false;
527
528 drm_modeset_acquire_init(&ctx, 0);
529
530 while (drm_modeset_lock_all_ctx(dev, &ctx) != 0)
531 drm_modeset_backoff(&ctx);
532
533 memcpy(save_enabled, enabled, count);
534 mask = GENMASK(count - 1, 0);
535 conn_configured = 0;
536retry:
537 conn_seq = conn_configured;
538 for (i = 0; i < count; i++) {
539 struct drm_connector *connector;
540 struct drm_encoder *encoder;
541 struct drm_crtc *new_crtc;
542
543 connector = connectors[i];
544
545 if (conn_configured & BIT(i))
546 continue;
547
548 if (conn_seq == 0 && !connector->has_tile)
549 continue;
550
551 if (connector->status == connector_status_connected)
552 num_connectors_detected++;
553
554 if (!enabled[i]) {
555 DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
556 connector->name);
557 conn_configured |= BIT(i);
558 continue;
559 }
560
561 if (connector->force == DRM_FORCE_OFF) {
562 DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
563 connector->name);
564 enabled[i] = false;
565 continue;
566 }
567
568 encoder = connector->state->best_encoder;
569 if (!encoder || WARN_ON(!connector->state->crtc)) {
570 if (connector->force > DRM_FORCE_OFF)
571 goto bail;
572
573 DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
574 connector->name);
575 enabled[i] = false;
576 conn_configured |= BIT(i);
577 continue;
578 }
579
580 num_connectors_enabled++;
581
582 new_crtc = connector->state->crtc;
583
584 /*
585 * Make sure we're not trying to drive multiple connectors
586 * with a single CRTC, since our cloning support may not
587 * match the BIOS.
588 */
589 for (j = 0; j < count; j++) {
590 if (crtcs[j] == new_crtc) {
591 DRM_DEBUG_KMS("fallback: cloned configuration\n");
592 goto bail;
593 }
594 }
595
596 DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
597 connector->name);
598
599 /* go for command line mode first */
600 modes[i] = drm_connector_pick_cmdline_mode(connector);
601
602 /* try for preferred next */
603 if (!modes[i]) {
604 DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
605 connector->name, connector->has_tile);
606 modes[i] = drm_connector_has_preferred_mode(connector, width, height);
607 }
608
609 /* No preferred mode marked by the EDID? Are there any modes? */
610 if (!modes[i] && !list_empty(&connector->modes)) {
611 DRM_DEBUG_KMS("using first mode listed on connector %s\n",
612 connector->name);
613 modes[i] = list_first_entry(&connector->modes,
614 struct drm_display_mode,
615 head);
616 }
617
618 /* last resort: use current mode */
619 if (!modes[i]) {
620 /*
621 * IMPORTANT: We want to use the adjusted mode (i.e.
622 * after the panel fitter upscaling) as the initial
623 * config, not the input mode, which is what crtc->mode
624 * usually contains. But since our current
625 * code puts a mode derived from the post-pfit timings
626 * into crtc->mode this works out correctly.
627 *
628 * This is crtc->mode and not crtc->state->mode for the
629 * fastboot check to work correctly.
630 */
631 DRM_DEBUG_KMS("looking for current mode on connector %s\n",
632 connector->name);
633 modes[i] = &connector->state->crtc->mode;
634 }
635 crtcs[i] = new_crtc;
636
637 DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
638 connector->name,
639 connector->state->crtc->base.id,
640 connector->state->crtc->name,
641 modes[i]->hdisplay, modes[i]->vdisplay,
642 modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
643
644 fallback = false;
645 conn_configured |= BIT(i);
646 }
647
648 if ((conn_configured & mask) != mask && conn_configured != conn_seq)
649 goto retry;
650
651 /*
652 * If the BIOS didn't enable everything it could, fall back to have the
653 * same user experiencing of lighting up as much as possible like the
654 * fbdev helper library.
655 */
656 if (num_connectors_enabled != num_connectors_detected &&
657 num_connectors_enabled < dev->mode_config.num_crtc) {
658 DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
659 DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
660 num_connectors_detected);
661 fallback = true;
662 }
663
664 if (fallback) {
665bail:
666 DRM_DEBUG_KMS("Not using firmware configuration\n");
667 memcpy(enabled, save_enabled, count);
668 ret = false;
669 }
670
671 drm_modeset_drop_locks(&ctx);
672 drm_modeset_acquire_fini(&ctx);
673
674 kfree(save_enabled);
675 return ret;
676}
677
678/**
679 * drm_client_modeset_probe() - Probe for displays
680 * @client: DRM client
681 * @width: Maximum display mode width (optional)
682 * @height: Maximum display mode height (optional)
683 *
684 * This function sets up display pipelines for enabled connectors and stores the
685 * config in the client's modeset array.
686 *
687 * Returns:
688 * Zero on success or negative error code on failure.
689 */
690int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, unsigned int height)
691{
692 struct drm_connector *connector, **connectors = NULL;
693 struct drm_connector_list_iter conn_iter;
694 struct drm_device *dev = client->dev;
695 unsigned int total_modes_count = 0;
696 struct drm_client_offset *offsets;
697 unsigned int connector_count = 0;
698 struct drm_display_mode **modes;
699 struct drm_crtc **crtcs;
700 int i, ret = 0;
701 bool *enabled;
702
703 DRM_DEBUG_KMS("\n");
704
705 if (!width)
706 width = dev->mode_config.max_width;
707 if (!height)
708 height = dev->mode_config.max_height;
709
710 drm_connector_list_iter_begin(dev, &conn_iter);
711 drm_client_for_each_connector_iter(connector, &conn_iter) {
712 struct drm_connector **tmp;
713
714 tmp = krealloc(connectors, (connector_count + 1) * sizeof(*connectors), GFP_KERNEL);
715 if (!tmp) {
716 ret = -ENOMEM;
717 goto free_connectors;
718 }
719
720 connectors = tmp;
721 drm_connector_get(connector);
722 connectors[connector_count++] = connector;
723 }
724 drm_connector_list_iter_end(&conn_iter);
725
726 if (!connector_count)
727 return 0;
728
729 crtcs = kcalloc(connector_count, sizeof(*crtcs), GFP_KERNEL);
730 modes = kcalloc(connector_count, sizeof(*modes), GFP_KERNEL);
731 offsets = kcalloc(connector_count, sizeof(*offsets), GFP_KERNEL);
732 enabled = kcalloc(connector_count, sizeof(bool), GFP_KERNEL);
733 if (!crtcs || !modes || !enabled || !offsets) {
734 DRM_ERROR("Memory allocation failed\n");
735 ret = -ENOMEM;
736 goto out;
737 }
738
739 mutex_lock(&client->modeset_mutex);
740
741 mutex_lock(&dev->mode_config.mutex);
742 for (i = 0; i < connector_count; i++)
743 total_modes_count += connectors[i]->funcs->fill_modes(connectors[i], width, height);
744 if (!total_modes_count)
745 DRM_DEBUG_KMS("No connectors reported connected with modes\n");
746 drm_client_connectors_enabled(connectors, connector_count, enabled);
747
748 if (!drm_client_firmware_config(client, connectors, connector_count, crtcs,
749 modes, offsets, enabled, width, height)) {
750 memset(modes, 0, connector_count * sizeof(*modes));
751 memset(crtcs, 0, connector_count * sizeof(*crtcs));
752 memset(offsets, 0, connector_count * sizeof(*offsets));
753
754 if (!drm_client_target_cloned(dev, connectors, connector_count, modes,
755 offsets, enabled, width, height) &&
756 !drm_client_target_preferred(connectors, connector_count, modes,
757 offsets, enabled, width, height))
758 DRM_ERROR("Unable to find initial modes\n");
759
760 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
761 width, height);
762
763 drm_client_pick_crtcs(client, connectors, connector_count,
764 crtcs, modes, 0, width, height);
765 }
766 mutex_unlock(&dev->mode_config.mutex);
767
768 drm_client_modeset_release(client);
769
770 for (i = 0; i < connector_count; i++) {
771 struct drm_display_mode *mode = modes[i];
772 struct drm_crtc *crtc = crtcs[i];
773 struct drm_client_offset *offset = &offsets[i];
774
775 if (mode && crtc) {
776 struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
777 struct drm_connector *connector = connectors[i];
778
779 DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
780 mode->name, crtc->base.id, offset->x, offset->y);
781
782 if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
783 (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
784 ret = -EINVAL;
785 break;
786 }
787
788 modeset->mode = drm_mode_duplicate(dev, mode);
789 drm_connector_get(connector);
790 modeset->connectors[modeset->num_connectors++] = connector;
791 modeset->x = offset->x;
792 modeset->y = offset->y;
793 }
794 }
795
796 mutex_unlock(&client->modeset_mutex);
797out:
798 kfree(crtcs);
799 kfree(modes);
800 kfree(offsets);
801 kfree(enabled);
802free_connectors:
803 for (i = 0; i < connector_count; i++)
804 drm_connector_put(connectors[i]);
805 kfree(connectors);
806
807 return ret;
808}
809EXPORT_SYMBOL(drm_client_modeset_probe);
810
811/**
812 * drm_client_rotation() - Check the initial rotation value
813 * @modeset: DRM modeset
814 * @rotation: Returned rotation value
815 *
816 * This function checks if the primary plane in @modeset can hw rotate
817 * to match the rotation needed on its connector.
818 *
819 * Note: Currently only 0 and 180 degrees are supported.
820 *
821 * Return:
822 * True if the plane can do the rotation, false otherwise.
823 */
824bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation)
825{
826 struct drm_connector *connector = modeset->connectors[0];
827 struct drm_plane *plane = modeset->crtc->primary;
828 struct drm_cmdline_mode *cmdline;
829 u64 valid_mask = 0;
830 unsigned int i;
831
832 if (!modeset->num_connectors)
833 return false;
834
835 switch (connector->display_info.panel_orientation) {
836 case DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP:
837 *rotation = DRM_MODE_ROTATE_180;
838 break;
839 case DRM_MODE_PANEL_ORIENTATION_LEFT_UP:
840 *rotation = DRM_MODE_ROTATE_90;
841 break;
842 case DRM_MODE_PANEL_ORIENTATION_RIGHT_UP:
843 *rotation = DRM_MODE_ROTATE_270;
844 break;
845 default:
846 *rotation = DRM_MODE_ROTATE_0;
847 }
848
849 /**
850 * The panel already defined the default rotation
851 * through its orientation. Whatever has been provided
852 * on the command line needs to be added to that.
853 *
854 * Unfortunately, the rotations are at different bit
855 * indices, so the math to add them up are not as
856 * trivial as they could.
857 *
858 * Reflections on the other hand are pretty trivial to deal with, a
859 * simple XOR between the two handle the addition nicely.
860 */
861 cmdline = &connector->cmdline_mode;
862 if (cmdline->specified && cmdline->rotation_reflection) {
863 unsigned int cmdline_rest, panel_rest;
864 unsigned int cmdline_rot, panel_rot;
865 unsigned int sum_rot, sum_rest;
866
867 panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK);
868 cmdline_rot = ilog2(cmdline->rotation_reflection & DRM_MODE_ROTATE_MASK);
869 sum_rot = (panel_rot + cmdline_rot) % 4;
870
871 panel_rest = *rotation & ~DRM_MODE_ROTATE_MASK;
872 cmdline_rest = cmdline->rotation_reflection & ~DRM_MODE_ROTATE_MASK;
873 sum_rest = panel_rest ^ cmdline_rest;
874
875 *rotation = (1 << sum_rot) | sum_rest;
876 }
877
878 /*
879 * TODO: support 90 / 270 degree hardware rotation,
880 * depending on the hardware this may require the framebuffer
881 * to be in a specific tiling format.
882 */
883 if ((*rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_180 ||
884 !plane->rotation_property)
885 return false;
886
887 for (i = 0; i < plane->rotation_property->num_values; i++)
888 valid_mask |= (1ULL << plane->rotation_property->values[i]);
889
890 if (!(*rotation & valid_mask))
891 return false;
892
893 return true;
894}
895EXPORT_SYMBOL(drm_client_rotation);
896
897static int drm_client_modeset_commit_atomic(struct drm_client_dev *client, bool active)
898{
899 struct drm_device *dev = client->dev;
900 struct drm_plane *plane;
901 struct drm_atomic_state *state;
902 struct drm_modeset_acquire_ctx ctx;
903 struct drm_mode_set *mode_set;
904 int ret;
905
906 drm_modeset_acquire_init(&ctx, 0);
907
908 state = drm_atomic_state_alloc(dev);
909 if (!state) {
910 ret = -ENOMEM;
911 goto out_ctx;
912 }
913
914 state->acquire_ctx = &ctx;
915retry:
916 drm_for_each_plane(plane, dev) {
917 struct drm_plane_state *plane_state;
918
919 plane_state = drm_atomic_get_plane_state(state, plane);
920 if (IS_ERR(plane_state)) {
921 ret = PTR_ERR(plane_state);
922 goto out_state;
923 }
924
925 plane_state->rotation = DRM_MODE_ROTATE_0;
926
927 /* disable non-primary: */
928 if (plane->type == DRM_PLANE_TYPE_PRIMARY)
929 continue;
930
931 ret = __drm_atomic_helper_disable_plane(plane, plane_state);
932 if (ret != 0)
933 goto out_state;
934 }
935
936 drm_client_for_each_modeset(mode_set, client) {
937 struct drm_plane *primary = mode_set->crtc->primary;
938 unsigned int rotation;
939
940 if (drm_client_rotation(mode_set, &rotation)) {
941 struct drm_plane_state *plane_state;
942
943 /* Cannot fail as we've already gotten the plane state above */
944 plane_state = drm_atomic_get_new_plane_state(state, primary);
945 plane_state->rotation = rotation;
946 }
947
948 ret = __drm_atomic_helper_set_config(mode_set, state);
949 if (ret != 0)
950 goto out_state;
951
952 /*
953 * __drm_atomic_helper_set_config() sets active when a
954 * mode is set, unconditionally clear it if we force DPMS off
955 */
956 if (!active) {
957 struct drm_crtc *crtc = mode_set->crtc;
958 struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
959
960 crtc_state->active = false;
961 }
962 }
963
964 ret = drm_atomic_commit(state);
965
966out_state:
967 if (ret == -EDEADLK)
968 goto backoff;
969
970 drm_atomic_state_put(state);
971out_ctx:
972 drm_modeset_drop_locks(&ctx);
973 drm_modeset_acquire_fini(&ctx);
974
975 return ret;
976
977backoff:
978 drm_atomic_state_clear(state);
979 drm_modeset_backoff(&ctx);
980
981 goto retry;
982}
983
984static int drm_client_modeset_commit_legacy(struct drm_client_dev *client)
985{
986 struct drm_device *dev = client->dev;
987 struct drm_mode_set *mode_set;
988 struct drm_plane *plane;
989 int ret = 0;
990
991 drm_modeset_lock_all(dev);
992 drm_for_each_plane(plane, dev) {
993 if (plane->type != DRM_PLANE_TYPE_PRIMARY)
994 drm_plane_force_disable(plane);
995
996 if (plane->rotation_property)
997 drm_mode_plane_set_obj_prop(plane,
998 plane->rotation_property,
999 DRM_MODE_ROTATE_0);
1000 }
1001
1002 drm_client_for_each_modeset(mode_set, client) {
1003 struct drm_crtc *crtc = mode_set->crtc;
1004
1005 if (crtc->funcs->cursor_set2) {
1006 ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
1007 if (ret)
1008 goto out;
1009 } else if (crtc->funcs->cursor_set) {
1010 ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
1011 if (ret)
1012 goto out;
1013 }
1014
1015 ret = drm_mode_set_config_internal(mode_set);
1016 if (ret)
1017 goto out;
1018 }
1019out:
1020 drm_modeset_unlock_all(dev);
1021
1022 return ret;
1023}
1024
1025/**
1026 * drm_client_modeset_commit_force() - Force commit CRTC configuration
1027 * @client: DRM client
1028 *
1029 * Commit modeset configuration to crtcs without checking if there is a DRM master.
1030 *
1031 * Returns:
1032 * Zero on success or negative error code on failure.
1033 */
1034int drm_client_modeset_commit_force(struct drm_client_dev *client)
1035{
1036 struct drm_device *dev = client->dev;
1037 int ret;
1038
1039 mutex_lock(&client->modeset_mutex);
1040 if (drm_drv_uses_atomic_modeset(dev))
1041 ret = drm_client_modeset_commit_atomic(client, true);
1042 else
1043 ret = drm_client_modeset_commit_legacy(client);
1044 mutex_unlock(&client->modeset_mutex);
1045
1046 return ret;
1047}
1048EXPORT_SYMBOL(drm_client_modeset_commit_force);
1049
1050/**
1051 * drm_client_modeset_commit() - Commit CRTC configuration
1052 * @client: DRM client
1053 *
1054 * Commit modeset configuration to crtcs.
1055 *
1056 * Returns:
1057 * Zero on success or negative error code on failure.
1058 */
1059int drm_client_modeset_commit(struct drm_client_dev *client)
1060{
1061 struct drm_device *dev = client->dev;
1062 int ret;
1063
1064 if (!drm_master_internal_acquire(dev))
1065 return -EBUSY;
1066
1067 ret = drm_client_modeset_commit_force(client);
1068
1069 drm_master_internal_release(dev);
1070
1071 return ret;
1072}
1073EXPORT_SYMBOL(drm_client_modeset_commit);
1074
1075static void drm_client_modeset_dpms_legacy(struct drm_client_dev *client, int dpms_mode)
1076{
1077 struct drm_device *dev = client->dev;
1078 struct drm_connector *connector;
1079 struct drm_mode_set *modeset;
1080 int j;
1081
1082 drm_modeset_lock_all(dev);
1083 drm_client_for_each_modeset(modeset, client) {
1084 if (!modeset->crtc->enabled)
1085 continue;
1086
1087 for (j = 0; j < modeset->num_connectors; j++) {
1088 connector = modeset->connectors[j];
1089 connector->funcs->dpms(connector, dpms_mode);
1090 drm_object_property_set_value(&connector->base,
1091 dev->mode_config.dpms_property, dpms_mode);
1092 }
1093 }
1094 drm_modeset_unlock_all(dev);
1095}
1096
1097/**
1098 * drm_client_modeset_dpms() - Set DPMS mode
1099 * @client: DRM client
1100 * @mode: DPMS mode
1101 *
1102 * Note: For atomic drivers @mode is reduced to on/off.
1103 *
1104 * Returns:
1105 * Zero on success or negative error code on failure.
1106 */
1107int drm_client_modeset_dpms(struct drm_client_dev *client, int mode)
1108{
1109 struct drm_device *dev = client->dev;
1110 int ret = 0;
1111
1112 if (!drm_master_internal_acquire(dev))
1113 return -EBUSY;
1114
1115 mutex_lock(&client->modeset_mutex);
1116 if (drm_drv_uses_atomic_modeset(dev))
1117 ret = drm_client_modeset_commit_atomic(client, mode == DRM_MODE_DPMS_ON);
1118 else
1119 drm_client_modeset_dpms_legacy(client, mode);
1120 mutex_unlock(&client->modeset_mutex);
1121
1122 drm_master_internal_release(dev);
1123
1124 return ret;
1125}
1126EXPORT_SYMBOL(drm_client_modeset_dpms);