Loading...
1/*
2 * pata_serverworks.c - Serverworks PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
4 * (C) 2010 Bartlomiej Zolnierkiewicz
5 *
6 * based upon
7 *
8 * serverworks.c
9 *
10 * Copyright (C) 1998-2000 Michel Aubry
11 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
12 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
13 * Portions copyright (c) 2001 Sun Microsystems
14 *
15 *
16 * RCC/ServerWorks IDE driver for Linux
17 *
18 * OSB4: `Open South Bridge' IDE Interface (fn 1)
19 * supports UDMA mode 2 (33 MB/s)
20 *
21 * CSB5: `Champion South Bridge' IDE Interface (fn 1)
22 * all revisions support UDMA mode 4 (66 MB/s)
23 * revision A2.0 and up support UDMA mode 5 (100 MB/s)
24 *
25 * *** The CSB5 does not provide ANY register ***
26 * *** to detect 80-conductor cable presence. ***
27 *
28 * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
29 *
30 * Documentation:
31 * Available under NDA only. Errata info very hard to get.
32 */
33
34#include <linux/kernel.h>
35#include <linux/module.h>
36#include <linux/pci.h>
37#include <linux/init.h>
38#include <linux/blkdev.h>
39#include <linux/delay.h>
40#include <scsi/scsi_host.h>
41#include <linux/libata.h>
42
43#define DRV_NAME "pata_serverworks"
44#define DRV_VERSION "0.4.3"
45
46#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
47#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
48
49/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
50 * can overrun their FIFOs when used with the CSB5 */
51
52static const char *csb_bad_ata100[] = {
53 "ST320011A",
54 "ST340016A",
55 "ST360021A",
56 "ST380021A",
57 NULL
58};
59
60/**
61 * dell_cable - Dell serverworks cable detection
62 * @ap: ATA port to do cable detect
63 *
64 * Dell hide the 40/80 pin select for their interfaces in the top two
65 * bits of the subsystem ID.
66 */
67
68static int dell_cable(struct ata_port *ap) {
69 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
70
71 if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
72 return ATA_CBL_PATA80;
73 return ATA_CBL_PATA40;
74}
75
76/**
77 * sun_cable - Sun Cobalt 'Alpine' cable detection
78 * @ap: ATA port to do cable select
79 *
80 * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
81 * subsystem ID the same as dell. We could use one function but we may
82 * need to extend the Dell one in future
83 */
84
85static int sun_cable(struct ata_port *ap) {
86 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
87
88 if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
89 return ATA_CBL_PATA80;
90 return ATA_CBL_PATA40;
91}
92
93/**
94 * osb4_cable - OSB4 cable detect
95 * @ap: ATA port to check
96 *
97 * The OSB4 isn't UDMA66 capable so this is easy
98 */
99
100static int osb4_cable(struct ata_port *ap) {
101 return ATA_CBL_PATA40;
102}
103
104/**
105 * csb_cable - CSB5/6 cable detect
106 * @ap: ATA port to check
107 *
108 * Serverworks default arrangement is to use the drive side detection
109 * only.
110 */
111
112static int csb_cable(struct ata_port *ap) {
113 return ATA_CBL_PATA_UNK;
114}
115
116struct sv_cable_table {
117 int device;
118 int subvendor;
119 int (*cable_detect)(struct ata_port *ap);
120};
121
122/*
123 * Note that we don't copy the old serverworks code because the old
124 * code contains obvious mistakes
125 */
126
127static struct sv_cable_table cable_detect[] = {
128 { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
129 { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
130 { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
131 { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
132 { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
133 { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
134 { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
135 { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable },
136 { }
137};
138
139/**
140 * serverworks_cable_detect - cable detection
141 * @ap: ATA port
142 *
143 * Perform cable detection according to the device and subvendor
144 * identifications
145 */
146
147static int serverworks_cable_detect(struct ata_port *ap)
148{
149 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
150 struct sv_cable_table *cb = cable_detect;
151
152 while(cb->device) {
153 if (cb->device == pdev->device &&
154 (cb->subvendor == pdev->subsystem_vendor ||
155 cb->subvendor == PCI_ANY_ID)) {
156 return cb->cable_detect(ap);
157 }
158 cb++;
159 }
160
161 BUG();
162 return -1; /* kill compiler warning */
163}
164
165/**
166 * serverworks_is_csb - Check for CSB or OSB
167 * @pdev: PCI device to check
168 *
169 * Returns true if the device being checked is known to be a CSB
170 * series device.
171 */
172
173static u8 serverworks_is_csb(struct pci_dev *pdev)
174{
175 switch (pdev->device) {
176 case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
177 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
178 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
179 case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
180 return 1;
181 default:
182 break;
183 }
184 return 0;
185}
186
187/**
188 * serverworks_osb4_filter - mode selection filter
189 * @adev: ATA device
190 * @mask: Mask of proposed modes
191 *
192 * Filter the offered modes for the device to apply controller
193 * specific rules. OSB4 requires no UDMA for disks due to a FIFO
194 * bug we hit.
195 */
196
197static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned long mask)
198{
199 if (adev->class == ATA_DEV_ATA)
200 mask &= ~ATA_MASK_UDMA;
201 return mask;
202}
203
204
205/**
206 * serverworks_csb_filter - mode selection filter
207 * @adev: ATA device
208 * @mask: Mask of proposed modes
209 *
210 * Check the blacklist and disable UDMA5 if matched
211 */
212
213static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned long mask)
214{
215 const char *p;
216 char model_num[ATA_ID_PROD_LEN + 1];
217 int i;
218
219 /* Disk, UDMA */
220 if (adev->class != ATA_DEV_ATA)
221 return mask;
222
223 /* Actually do need to check */
224 ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
225
226 for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) {
227 if (!strcmp(p, model_num))
228 mask &= ~(0xE0 << ATA_SHIFT_UDMA);
229 }
230 return mask;
231}
232
233/**
234 * serverworks_set_piomode - set initial PIO mode data
235 * @ap: ATA interface
236 * @adev: ATA device
237 *
238 * Program the OSB4/CSB5 timing registers for PIO. The PIO register
239 * load is done as a simple lookup.
240 */
241static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev)
242{
243 static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
244 int offset = 1 + 2 * ap->port_no - adev->devno;
245 int devbits = (2 * ap->port_no + adev->devno) * 4;
246 u16 csb5_pio;
247 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
248 int pio = adev->pio_mode - XFER_PIO_0;
249
250 pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]);
251
252 /* The OSB4 just requires the timing but the CSB series want the
253 mode number as well */
254 if (serverworks_is_csb(pdev)) {
255 pci_read_config_word(pdev, 0x4A, &csb5_pio);
256 csb5_pio &= ~(0x0F << devbits);
257 pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits));
258 }
259}
260
261/**
262 * serverworks_set_dmamode - set initial DMA mode data
263 * @ap: ATA interface
264 * @adev: ATA device
265 *
266 * Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5
267 * chipset. The MWDMA mode values are pulled from a lookup table
268 * while the chipset uses mode number for UDMA.
269 */
270
271static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev)
272{
273 static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
274 int offset = 1 + 2 * ap->port_no - adev->devno;
275 int devbits = 2 * ap->port_no + adev->devno;
276 u8 ultra;
277 u8 ultra_cfg;
278 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
279
280 pci_read_config_byte(pdev, 0x54, &ultra_cfg);
281 pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
282 ultra &= ~(0x0F << (adev->devno * 4));
283
284 if (adev->dma_mode >= XFER_UDMA_0) {
285 pci_write_config_byte(pdev, 0x44 + offset, 0x20);
286
287 ultra |= (adev->dma_mode - XFER_UDMA_0)
288 << (adev->devno * 4);
289 ultra_cfg |= (1 << devbits);
290 } else {
291 pci_write_config_byte(pdev, 0x44 + offset,
292 dma_mode[adev->dma_mode - XFER_MW_DMA_0]);
293 ultra_cfg &= ~(1 << devbits);
294 }
295 pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
296 pci_write_config_byte(pdev, 0x54, ultra_cfg);
297}
298
299static struct scsi_host_template serverworks_sht = {
300 ATA_BMDMA_SHT(DRV_NAME),
301};
302
303static struct ata_port_operations serverworks_osb4_port_ops = {
304 .inherits = &ata_bmdma_port_ops,
305 .cable_detect = serverworks_cable_detect,
306 .mode_filter = serverworks_osb4_filter,
307 .set_piomode = serverworks_set_piomode,
308 .set_dmamode = serverworks_set_dmamode,
309};
310
311static struct ata_port_operations serverworks_csb_port_ops = {
312 .inherits = &serverworks_osb4_port_ops,
313 .mode_filter = serverworks_csb_filter,
314};
315
316static int serverworks_fixup_osb4(struct pci_dev *pdev)
317{
318 u32 reg;
319 struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
320 PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
321 if (isa_dev) {
322 pci_read_config_dword(isa_dev, 0x64, ®);
323 reg &= ~0x00002000; /* disable 600ns interrupt mask */
324 if (!(reg & 0x00004000))
325 printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n");
326 reg |= 0x00004000; /* enable UDMA/33 support */
327 pci_write_config_dword(isa_dev, 0x64, reg);
328 pci_dev_put(isa_dev);
329 return 0;
330 }
331 printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n");
332 return -ENODEV;
333}
334
335static int serverworks_fixup_csb(struct pci_dev *pdev)
336{
337 u8 btr;
338
339 /* Third Channel Test */
340 if (!(PCI_FUNC(pdev->devfn) & 1)) {
341 struct pci_dev * findev = NULL;
342 u32 reg4c = 0;
343 findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
344 PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
345 if (findev) {
346 pci_read_config_dword(findev, 0x4C, ®4c);
347 reg4c &= ~0x000007FF;
348 reg4c |= 0x00000040;
349 reg4c |= 0x00000020;
350 pci_write_config_dword(findev, 0x4C, reg4c);
351 pci_dev_put(findev);
352 }
353 } else {
354 struct pci_dev * findev = NULL;
355 u8 reg41 = 0;
356
357 findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
358 PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
359 if (findev) {
360 pci_read_config_byte(findev, 0x41, ®41);
361 reg41 &= ~0x40;
362 pci_write_config_byte(findev, 0x41, reg41);
363 pci_dev_put(findev);
364 }
365 }
366 /* setup the UDMA Control register
367 *
368 * 1. clear bit 6 to enable DMA
369 * 2. enable DMA modes with bits 0-1
370 * 00 : legacy
371 * 01 : udma2
372 * 10 : udma2/udma4
373 * 11 : udma2/udma4/udma5
374 */
375 pci_read_config_byte(pdev, 0x5A, &btr);
376 btr &= ~0x40;
377 if (!(PCI_FUNC(pdev->devfn) & 1))
378 btr |= 0x2;
379 else
380 btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
381 pci_write_config_byte(pdev, 0x5A, btr);
382
383 return btr;
384}
385
386static void serverworks_fixup_ht1000(struct pci_dev *pdev)
387{
388 u8 btr;
389 /* Setup HT1000 SouthBridge Controller - Single Channel Only */
390 pci_read_config_byte(pdev, 0x5A, &btr);
391 btr &= ~0x40;
392 btr |= 0x3;
393 pci_write_config_byte(pdev, 0x5A, btr);
394}
395
396
397static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
398{
399 static const struct ata_port_info info[4] = {
400 { /* OSB4 */
401 .flags = ATA_FLAG_SLAVE_POSS,
402 .pio_mask = ATA_PIO4,
403 .mwdma_mask = ATA_MWDMA2,
404 .udma_mask = ATA_UDMA2,
405 .port_ops = &serverworks_osb4_port_ops
406 }, { /* OSB4 no UDMA */
407 .flags = ATA_FLAG_SLAVE_POSS,
408 .pio_mask = ATA_PIO4,
409 .mwdma_mask = ATA_MWDMA2,
410 /* No UDMA */
411 .port_ops = &serverworks_osb4_port_ops
412 }, { /* CSB5 */
413 .flags = ATA_FLAG_SLAVE_POSS,
414 .pio_mask = ATA_PIO4,
415 .mwdma_mask = ATA_MWDMA2,
416 .udma_mask = ATA_UDMA4,
417 .port_ops = &serverworks_csb_port_ops
418 }, { /* CSB5 - later revisions*/
419 .flags = ATA_FLAG_SLAVE_POSS,
420 .pio_mask = ATA_PIO4,
421 .mwdma_mask = ATA_MWDMA2,
422 .udma_mask = ATA_UDMA5,
423 .port_ops = &serverworks_csb_port_ops
424 }
425 };
426 const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
427 int rc;
428
429 rc = pcim_enable_device(pdev);
430 if (rc)
431 return rc;
432
433 /* Force master latency timer to 64 PCI clocks */
434 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
435
436 /* OSB4 : South Bridge and IDE */
437 if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
438 /* Select non UDMA capable OSB4 if we can't do fixups */
439 if ( serverworks_fixup_osb4(pdev) < 0)
440 ppi[0] = &info[1];
441 }
442 /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
443 else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
444 (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
445 (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
446
447 /* If the returned btr is the newer revision then
448 select the right info block */
449 if (serverworks_fixup_csb(pdev) == 3)
450 ppi[0] = &info[3];
451
452 /* Is this the 3rd channel CSB6 IDE ? */
453 if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
454 ppi[1] = &ata_dummy_port_info;
455 }
456 /* setup HT1000E */
457 else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
458 serverworks_fixup_ht1000(pdev);
459
460 if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
461 ata_pci_bmdma_clear_simplex(pdev);
462
463 return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
464}
465
466#ifdef CONFIG_PM
467static int serverworks_reinit_one(struct pci_dev *pdev)
468{
469 struct ata_host *host = dev_get_drvdata(&pdev->dev);
470 int rc;
471
472 rc = ata_pci_device_do_resume(pdev);
473 if (rc)
474 return rc;
475
476 /* Force master latency timer to 64 PCI clocks */
477 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
478
479 switch (pdev->device) {
480 case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
481 serverworks_fixup_osb4(pdev);
482 break;
483 case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
484 ata_pci_bmdma_clear_simplex(pdev);
485 /* fall through */
486 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
487 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
488 serverworks_fixup_csb(pdev);
489 break;
490 case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
491 serverworks_fixup_ht1000(pdev);
492 break;
493 }
494
495 ata_host_resume(host);
496 return 0;
497}
498#endif
499
500static const struct pci_device_id serverworks[] = {
501 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
502 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2},
503 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
504 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2},
505 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2},
506
507 { },
508};
509
510static struct pci_driver serverworks_pci_driver = {
511 .name = DRV_NAME,
512 .id_table = serverworks,
513 .probe = serverworks_init_one,
514 .remove = ata_pci_remove_one,
515#ifdef CONFIG_PM
516 .suspend = ata_pci_device_suspend,
517 .resume = serverworks_reinit_one,
518#endif
519};
520
521static int __init serverworks_init(void)
522{
523 return pci_register_driver(&serverworks_pci_driver);
524}
525
526static void __exit serverworks_exit(void)
527{
528 pci_unregister_driver(&serverworks_pci_driver);
529}
530
531MODULE_AUTHOR("Alan Cox");
532MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6");
533MODULE_LICENSE("GPL");
534MODULE_DEVICE_TABLE(pci, serverworks);
535MODULE_VERSION(DRV_VERSION);
536
537module_init(serverworks_init);
538module_exit(serverworks_exit);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * pata_serverworks.c - Serverworks PATA for new ATA layer
4 * (C) 2005 Red Hat Inc
5 * (C) 2010 Bartlomiej Zolnierkiewicz
6 *
7 * based upon
8 *
9 * serverworks.c
10 *
11 * Copyright (C) 1998-2000 Michel Aubry
12 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
13 * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
14 * Portions copyright (c) 2001 Sun Microsystems
15 *
16 *
17 * RCC/ServerWorks IDE driver for Linux
18 *
19 * OSB4: `Open South Bridge' IDE Interface (fn 1)
20 * supports UDMA mode 2 (33 MB/s)
21 *
22 * CSB5: `Champion South Bridge' IDE Interface (fn 1)
23 * all revisions support UDMA mode 4 (66 MB/s)
24 * revision A2.0 and up support UDMA mode 5 (100 MB/s)
25 *
26 * *** The CSB5 does not provide ANY register ***
27 * *** to detect 80-conductor cable presence. ***
28 *
29 * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
30 *
31 * Documentation:
32 * Available under NDA only. Errata info very hard to get.
33 */
34
35#include <linux/kernel.h>
36#include <linux/module.h>
37#include <linux/pci.h>
38#include <linux/blkdev.h>
39#include <linux/delay.h>
40#include <scsi/scsi_host.h>
41#include <linux/libata.h>
42
43#define DRV_NAME "pata_serverworks"
44#define DRV_VERSION "0.4.3"
45
46#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
47#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
48
49/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
50 * can overrun their FIFOs when used with the CSB5 */
51
52static const char *csb_bad_ata100[] = {
53 "ST320011A",
54 "ST340016A",
55 "ST360021A",
56 "ST380021A",
57 NULL
58};
59
60/**
61 * oem_cable - Dell/Sun serverworks cable detection
62 * @ap: ATA port to do cable detect
63 *
64 * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
65 * for their interfaces in the top two bits of the subsystem ID.
66 */
67
68static int oem_cable(struct ata_port *ap)
69{
70 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
71
72 if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
73 return ATA_CBL_PATA80;
74 return ATA_CBL_PATA40;
75}
76
77struct sv_cable_table {
78 int device;
79 int subvendor;
80 int (*cable_detect)(struct ata_port *ap);
81};
82
83static struct sv_cable_table cable_detect[] = {
84 { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable },
85 { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable },
86 { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable },
87 { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
88 { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
89 { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },
90 { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown },
91 { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown },
92 { }
93};
94
95/**
96 * serverworks_cable_detect - cable detection
97 * @ap: ATA port
98 *
99 * Perform cable detection according to the device and subvendor
100 * identifications
101 */
102
103static int serverworks_cable_detect(struct ata_port *ap)
104{
105 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
106 struct sv_cable_table *cb = cable_detect;
107
108 while(cb->device) {
109 if (cb->device == pdev->device &&
110 (cb->subvendor == pdev->subsystem_vendor ||
111 cb->subvendor == PCI_ANY_ID)) {
112 return cb->cable_detect(ap);
113 }
114 cb++;
115 }
116
117 BUG();
118 return -1; /* kill compiler warning */
119}
120
121/**
122 * serverworks_is_csb - Check for CSB or OSB
123 * @pdev: PCI device to check
124 *
125 * Returns true if the device being checked is known to be a CSB
126 * series device.
127 */
128
129static u8 serverworks_is_csb(struct pci_dev *pdev)
130{
131 switch (pdev->device) {
132 case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
133 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
134 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
135 case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
136 return 1;
137 default:
138 break;
139 }
140 return 0;
141}
142
143/**
144 * serverworks_osb4_filter - mode selection filter
145 * @adev: ATA device
146 * @mask: Mask of proposed modes
147 *
148 * Filter the offered modes for the device to apply controller
149 * specific rules. OSB4 requires no UDMA for disks due to a FIFO
150 * bug we hit.
151 */
152
153static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned long mask)
154{
155 if (adev->class == ATA_DEV_ATA)
156 mask &= ~ATA_MASK_UDMA;
157 return mask;
158}
159
160
161/**
162 * serverworks_csb_filter - mode selection filter
163 * @adev: ATA device
164 * @mask: Mask of proposed modes
165 *
166 * Check the blacklist and disable UDMA5 if matched
167 */
168
169static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned long mask)
170{
171 const char *p;
172 char model_num[ATA_ID_PROD_LEN + 1];
173 int i;
174
175 /* Disk, UDMA */
176 if (adev->class != ATA_DEV_ATA)
177 return mask;
178
179 /* Actually do need to check */
180 ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
181
182 for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) {
183 if (!strcmp(p, model_num))
184 mask &= ~(0xE0 << ATA_SHIFT_UDMA);
185 }
186 return mask;
187}
188
189/**
190 * serverworks_set_piomode - set initial PIO mode data
191 * @ap: ATA interface
192 * @adev: ATA device
193 *
194 * Program the OSB4/CSB5 timing registers for PIO. The PIO register
195 * load is done as a simple lookup.
196 */
197static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev)
198{
199 static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
200 int offset = 1 + 2 * ap->port_no - adev->devno;
201 int devbits = (2 * ap->port_no + adev->devno) * 4;
202 u16 csb5_pio;
203 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
204 int pio = adev->pio_mode - XFER_PIO_0;
205
206 pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]);
207
208 /* The OSB4 just requires the timing but the CSB series want the
209 mode number as well */
210 if (serverworks_is_csb(pdev)) {
211 pci_read_config_word(pdev, 0x4A, &csb5_pio);
212 csb5_pio &= ~(0x0F << devbits);
213 pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits));
214 }
215}
216
217/**
218 * serverworks_set_dmamode - set initial DMA mode data
219 * @ap: ATA interface
220 * @adev: ATA device
221 *
222 * Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5
223 * chipset. The MWDMA mode values are pulled from a lookup table
224 * while the chipset uses mode number for UDMA.
225 */
226
227static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev)
228{
229 static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
230 int offset = 1 + 2 * ap->port_no - adev->devno;
231 int devbits = 2 * ap->port_no + adev->devno;
232 u8 ultra;
233 u8 ultra_cfg;
234 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
235
236 pci_read_config_byte(pdev, 0x54, &ultra_cfg);
237 pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
238 ultra &= ~(0x0F << (adev->devno * 4));
239
240 if (adev->dma_mode >= XFER_UDMA_0) {
241 pci_write_config_byte(pdev, 0x44 + offset, 0x20);
242
243 ultra |= (adev->dma_mode - XFER_UDMA_0)
244 << (adev->devno * 4);
245 ultra_cfg |= (1 << devbits);
246 } else {
247 pci_write_config_byte(pdev, 0x44 + offset,
248 dma_mode[adev->dma_mode - XFER_MW_DMA_0]);
249 ultra_cfg &= ~(1 << devbits);
250 }
251 pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
252 pci_write_config_byte(pdev, 0x54, ultra_cfg);
253}
254
255static struct scsi_host_template serverworks_osb4_sht = {
256 ATA_BMDMA_SHT(DRV_NAME),
257 .sg_tablesize = LIBATA_DUMB_MAX_PRD,
258};
259
260static struct scsi_host_template serverworks_csb_sht = {
261 ATA_BMDMA_SHT(DRV_NAME),
262};
263
264static struct ata_port_operations serverworks_osb4_port_ops = {
265 .inherits = &ata_bmdma_port_ops,
266 .qc_prep = ata_bmdma_dumb_qc_prep,
267 .cable_detect = serverworks_cable_detect,
268 .mode_filter = serverworks_osb4_filter,
269 .set_piomode = serverworks_set_piomode,
270 .set_dmamode = serverworks_set_dmamode,
271};
272
273static struct ata_port_operations serverworks_csb_port_ops = {
274 .inherits = &serverworks_osb4_port_ops,
275 .qc_prep = ata_bmdma_qc_prep,
276 .mode_filter = serverworks_csb_filter,
277};
278
279static int serverworks_fixup_osb4(struct pci_dev *pdev)
280{
281 u32 reg;
282 struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
283 PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
284 if (isa_dev) {
285 pci_read_config_dword(isa_dev, 0x64, ®);
286 reg &= ~0x00002000; /* disable 600ns interrupt mask */
287 if (!(reg & 0x00004000))
288 printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n");
289 reg |= 0x00004000; /* enable UDMA/33 support */
290 pci_write_config_dword(isa_dev, 0x64, reg);
291 pci_dev_put(isa_dev);
292 return 0;
293 }
294 printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n");
295 return -ENODEV;
296}
297
298static int serverworks_fixup_csb(struct pci_dev *pdev)
299{
300 u8 btr;
301
302 /* Third Channel Test */
303 if (!(PCI_FUNC(pdev->devfn) & 1)) {
304 struct pci_dev * findev = NULL;
305 u32 reg4c = 0;
306 findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
307 PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
308 if (findev) {
309 pci_read_config_dword(findev, 0x4C, ®4c);
310 reg4c &= ~0x000007FF;
311 reg4c |= 0x00000040;
312 reg4c |= 0x00000020;
313 pci_write_config_dword(findev, 0x4C, reg4c);
314 pci_dev_put(findev);
315 }
316 } else {
317 struct pci_dev * findev = NULL;
318 u8 reg41 = 0;
319
320 findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
321 PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
322 if (findev) {
323 pci_read_config_byte(findev, 0x41, ®41);
324 reg41 &= ~0x40;
325 pci_write_config_byte(findev, 0x41, reg41);
326 pci_dev_put(findev);
327 }
328 }
329 /* setup the UDMA Control register
330 *
331 * 1. clear bit 6 to enable DMA
332 * 2. enable DMA modes with bits 0-1
333 * 00 : legacy
334 * 01 : udma2
335 * 10 : udma2/udma4
336 * 11 : udma2/udma4/udma5
337 */
338 pci_read_config_byte(pdev, 0x5A, &btr);
339 btr &= ~0x40;
340 if (!(PCI_FUNC(pdev->devfn) & 1))
341 btr |= 0x2;
342 else
343 btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
344 pci_write_config_byte(pdev, 0x5A, btr);
345
346 return btr;
347}
348
349static void serverworks_fixup_ht1000(struct pci_dev *pdev)
350{
351 u8 btr;
352 /* Setup HT1000 SouthBridge Controller - Single Channel Only */
353 pci_read_config_byte(pdev, 0x5A, &btr);
354 btr &= ~0x40;
355 btr |= 0x3;
356 pci_write_config_byte(pdev, 0x5A, btr);
357}
358
359static int serverworks_fixup(struct pci_dev *pdev)
360{
361 int rc = 0;
362
363 /* Force master latency timer to 64 PCI clocks */
364 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
365
366 switch (pdev->device) {
367 case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
368 rc = serverworks_fixup_osb4(pdev);
369 break;
370 case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
371 ata_pci_bmdma_clear_simplex(pdev);
372 /* fall through */
373 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
374 case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
375 rc = serverworks_fixup_csb(pdev);
376 break;
377 case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
378 serverworks_fixup_ht1000(pdev);
379 break;
380 }
381
382 return rc;
383}
384
385static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
386{
387 static const struct ata_port_info info[4] = {
388 { /* OSB4 */
389 .flags = ATA_FLAG_SLAVE_POSS,
390 .pio_mask = ATA_PIO4,
391 .mwdma_mask = ATA_MWDMA2,
392 .udma_mask = ATA_UDMA2,
393 .port_ops = &serverworks_osb4_port_ops
394 }, { /* OSB4 no UDMA */
395 .flags = ATA_FLAG_SLAVE_POSS,
396 .pio_mask = ATA_PIO4,
397 .mwdma_mask = ATA_MWDMA2,
398 /* No UDMA */
399 .port_ops = &serverworks_osb4_port_ops
400 }, { /* CSB5 */
401 .flags = ATA_FLAG_SLAVE_POSS,
402 .pio_mask = ATA_PIO4,
403 .mwdma_mask = ATA_MWDMA2,
404 .udma_mask = ATA_UDMA4,
405 .port_ops = &serverworks_csb_port_ops
406 }, { /* CSB5 - later revisions*/
407 .flags = ATA_FLAG_SLAVE_POSS,
408 .pio_mask = ATA_PIO4,
409 .mwdma_mask = ATA_MWDMA2,
410 .udma_mask = ATA_UDMA5,
411 .port_ops = &serverworks_csb_port_ops
412 }
413 };
414 const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
415 struct scsi_host_template *sht = &serverworks_csb_sht;
416 int rc;
417
418 rc = pcim_enable_device(pdev);
419 if (rc)
420 return rc;
421
422 rc = serverworks_fixup(pdev);
423
424 /* OSB4 : South Bridge and IDE */
425 if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
426 /* Select non UDMA capable OSB4 if we can't do fixups */
427 if (rc < 0)
428 ppi[0] = &info[1];
429 sht = &serverworks_osb4_sht;
430 }
431 /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
432 else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
433 (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
434 (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
435
436 /* If the returned btr is the newer revision then
437 select the right info block */
438 if (rc == 3)
439 ppi[0] = &info[3];
440
441 /* Is this the 3rd channel CSB6 IDE ? */
442 if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
443 ppi[1] = &ata_dummy_port_info;
444 }
445
446 return ata_pci_bmdma_init_one(pdev, ppi, sht, NULL, 0);
447}
448
449#ifdef CONFIG_PM_SLEEP
450static int serverworks_reinit_one(struct pci_dev *pdev)
451{
452 struct ata_host *host = pci_get_drvdata(pdev);
453 int rc;
454
455 rc = ata_pci_device_do_resume(pdev);
456 if (rc)
457 return rc;
458
459 (void)serverworks_fixup(pdev);
460
461 ata_host_resume(host);
462 return 0;
463}
464#endif
465
466static const struct pci_device_id serverworks[] = {
467 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
468 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2},
469 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
470 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2},
471 { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2},
472
473 { },
474};
475
476static struct pci_driver serverworks_pci_driver = {
477 .name = DRV_NAME,
478 .id_table = serverworks,
479 .probe = serverworks_init_one,
480 .remove = ata_pci_remove_one,
481#ifdef CONFIG_PM_SLEEP
482 .suspend = ata_pci_device_suspend,
483 .resume = serverworks_reinit_one,
484#endif
485};
486
487module_pci_driver(serverworks_pci_driver);
488
489MODULE_AUTHOR("Alan Cox");
490MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6");
491MODULE_LICENSE("GPL");
492MODULE_DEVICE_TABLE(pci, serverworks);
493MODULE_VERSION(DRV_VERSION);