Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * f_acm.c -- USB CDC serial (ACM) function driver
4 *
5 * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
6 * Copyright (C) 2008 by David Brownell
7 * Copyright (C) 2008 by Nokia Corporation
8 * Copyright (C) 2009 by Samsung Electronics
9 * Author: Michal Nazarewicz (mina86@mina86.com)
10 */
11
12/* #define VERBOSE_DEBUG */
13
14#include <linux/slab.h>
15#include <linux/kernel.h>
16#include <linux/module.h>
17#include <linux/device.h>
18#include <linux/err.h>
19
20#include "u_serial.h"
21
22
23/*
24 * This CDC ACM function support just wraps control functions and
25 * notifications around the generic serial-over-usb code.
26 *
27 * Because CDC ACM is standardized by the USB-IF, many host operating
28 * systems have drivers for it. Accordingly, ACM is the preferred
29 * interop solution for serial-port type connections. The control
30 * models are often not necessary, and in any case don't do much in
31 * this bare-bones implementation.
32 *
33 * Note that even MS-Windows has some support for ACM. However, that
34 * support is somewhat broken because when you use ACM in a composite
35 * device, having multiple interfaces confuses the poor OS. It doesn't
36 * seem to understand CDC Union descriptors. The new "association"
37 * descriptors (roughly equivalent to CDC Unions) may sometimes help.
38 */
39
40struct f_acm {
41 struct gserial port;
42 u8 ctrl_id, data_id;
43 u8 port_num;
44
45 u8 pending;
46
47 /* lock is mostly for pending and notify_req ... they get accessed
48 * by callbacks both from tty (open/close/break) under its spinlock,
49 * and notify_req.complete() which can't use that lock.
50 */
51 spinlock_t lock;
52
53 struct usb_ep *notify;
54 struct usb_request *notify_req;
55
56 struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
57
58 /* SetControlLineState request -- CDC 1.1 section 6.2.14 (INPUT) */
59 u16 port_handshake_bits;
60#define ACM_CTRL_RTS (1 << 1) /* unused with full duplex */
61#define ACM_CTRL_DTR (1 << 0) /* host is ready for data r/w */
62
63 /* SerialState notification -- CDC 1.1 section 6.3.5 (OUTPUT) */
64 u16 serial_state;
65#define ACM_CTRL_OVERRUN (1 << 6)
66#define ACM_CTRL_PARITY (1 << 5)
67#define ACM_CTRL_FRAMING (1 << 4)
68#define ACM_CTRL_RI (1 << 3)
69#define ACM_CTRL_BRK (1 << 2)
70#define ACM_CTRL_DSR (1 << 1)
71#define ACM_CTRL_DCD (1 << 0)
72};
73
74static inline struct f_acm *func_to_acm(struct usb_function *f)
75{
76 return container_of(f, struct f_acm, port.func);
77}
78
79static inline struct f_acm *port_to_acm(struct gserial *p)
80{
81 return container_of(p, struct f_acm, port);
82}
83
84/*-------------------------------------------------------------------------*/
85
86/* notification endpoint uses smallish and infrequent fixed-size messages */
87
88#define GS_NOTIFY_INTERVAL_MS 32
89#define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */
90
91/* interface and class descriptors: */
92
93static struct usb_interface_assoc_descriptor
94acm_iad_descriptor = {
95 .bLength = sizeof acm_iad_descriptor,
96 .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
97
98 /* .bFirstInterface = DYNAMIC, */
99 .bInterfaceCount = 2, // control + data
100 .bFunctionClass = USB_CLASS_COMM,
101 .bFunctionSubClass = USB_CDC_SUBCLASS_ACM,
102 .bFunctionProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
103 /* .iFunction = DYNAMIC */
104};
105
106
107static struct usb_interface_descriptor acm_control_interface_desc = {
108 .bLength = USB_DT_INTERFACE_SIZE,
109 .bDescriptorType = USB_DT_INTERFACE,
110 /* .bInterfaceNumber = DYNAMIC */
111 .bNumEndpoints = 1,
112 .bInterfaceClass = USB_CLASS_COMM,
113 .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
114 .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
115 /* .iInterface = DYNAMIC */
116};
117
118static struct usb_interface_descriptor acm_data_interface_desc = {
119 .bLength = USB_DT_INTERFACE_SIZE,
120 .bDescriptorType = USB_DT_INTERFACE,
121 /* .bInterfaceNumber = DYNAMIC */
122 .bNumEndpoints = 2,
123 .bInterfaceClass = USB_CLASS_CDC_DATA,
124 .bInterfaceSubClass = 0,
125 .bInterfaceProtocol = 0,
126 /* .iInterface = DYNAMIC */
127};
128
129static struct usb_cdc_header_desc acm_header_desc = {
130 .bLength = sizeof(acm_header_desc),
131 .bDescriptorType = USB_DT_CS_INTERFACE,
132 .bDescriptorSubType = USB_CDC_HEADER_TYPE,
133 .bcdCDC = cpu_to_le16(0x0110),
134};
135
136static struct usb_cdc_call_mgmt_descriptor
137acm_call_mgmt_descriptor = {
138 .bLength = sizeof(acm_call_mgmt_descriptor),
139 .bDescriptorType = USB_DT_CS_INTERFACE,
140 .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
141 .bmCapabilities = 0,
142 /* .bDataInterface = DYNAMIC */
143};
144
145static struct usb_cdc_acm_descriptor acm_descriptor = {
146 .bLength = sizeof(acm_descriptor),
147 .bDescriptorType = USB_DT_CS_INTERFACE,
148 .bDescriptorSubType = USB_CDC_ACM_TYPE,
149 .bmCapabilities = USB_CDC_CAP_LINE,
150};
151
152static struct usb_cdc_union_desc acm_union_desc = {
153 .bLength = sizeof(acm_union_desc),
154 .bDescriptorType = USB_DT_CS_INTERFACE,
155 .bDescriptorSubType = USB_CDC_UNION_TYPE,
156 /* .bMasterInterface0 = DYNAMIC */
157 /* .bSlaveInterface0 = DYNAMIC */
158};
159
160/* full speed support: */
161
162static struct usb_endpoint_descriptor acm_fs_notify_desc = {
163 .bLength = USB_DT_ENDPOINT_SIZE,
164 .bDescriptorType = USB_DT_ENDPOINT,
165 .bEndpointAddress = USB_DIR_IN,
166 .bmAttributes = USB_ENDPOINT_XFER_INT,
167 .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
168 .bInterval = GS_NOTIFY_INTERVAL_MS,
169};
170
171static struct usb_endpoint_descriptor acm_fs_in_desc = {
172 .bLength = USB_DT_ENDPOINT_SIZE,
173 .bDescriptorType = USB_DT_ENDPOINT,
174 .bEndpointAddress = USB_DIR_IN,
175 .bmAttributes = USB_ENDPOINT_XFER_BULK,
176};
177
178static struct usb_endpoint_descriptor acm_fs_out_desc = {
179 .bLength = USB_DT_ENDPOINT_SIZE,
180 .bDescriptorType = USB_DT_ENDPOINT,
181 .bEndpointAddress = USB_DIR_OUT,
182 .bmAttributes = USB_ENDPOINT_XFER_BULK,
183};
184
185static struct usb_descriptor_header *acm_fs_function[] = {
186 (struct usb_descriptor_header *) &acm_iad_descriptor,
187 (struct usb_descriptor_header *) &acm_control_interface_desc,
188 (struct usb_descriptor_header *) &acm_header_desc,
189 (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
190 (struct usb_descriptor_header *) &acm_descriptor,
191 (struct usb_descriptor_header *) &acm_union_desc,
192 (struct usb_descriptor_header *) &acm_fs_notify_desc,
193 (struct usb_descriptor_header *) &acm_data_interface_desc,
194 (struct usb_descriptor_header *) &acm_fs_in_desc,
195 (struct usb_descriptor_header *) &acm_fs_out_desc,
196 NULL,
197};
198
199/* high speed support: */
200static struct usb_endpoint_descriptor acm_hs_notify_desc = {
201 .bLength = USB_DT_ENDPOINT_SIZE,
202 .bDescriptorType = USB_DT_ENDPOINT,
203 .bEndpointAddress = USB_DIR_IN,
204 .bmAttributes = USB_ENDPOINT_XFER_INT,
205 .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
206 .bInterval = USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
207};
208
209static struct usb_endpoint_descriptor acm_hs_in_desc = {
210 .bLength = USB_DT_ENDPOINT_SIZE,
211 .bDescriptorType = USB_DT_ENDPOINT,
212 .bmAttributes = USB_ENDPOINT_XFER_BULK,
213 .wMaxPacketSize = cpu_to_le16(512),
214};
215
216static struct usb_endpoint_descriptor acm_hs_out_desc = {
217 .bLength = USB_DT_ENDPOINT_SIZE,
218 .bDescriptorType = USB_DT_ENDPOINT,
219 .bmAttributes = USB_ENDPOINT_XFER_BULK,
220 .wMaxPacketSize = cpu_to_le16(512),
221};
222
223static struct usb_descriptor_header *acm_hs_function[] = {
224 (struct usb_descriptor_header *) &acm_iad_descriptor,
225 (struct usb_descriptor_header *) &acm_control_interface_desc,
226 (struct usb_descriptor_header *) &acm_header_desc,
227 (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
228 (struct usb_descriptor_header *) &acm_descriptor,
229 (struct usb_descriptor_header *) &acm_union_desc,
230 (struct usb_descriptor_header *) &acm_hs_notify_desc,
231 (struct usb_descriptor_header *) &acm_data_interface_desc,
232 (struct usb_descriptor_header *) &acm_hs_in_desc,
233 (struct usb_descriptor_header *) &acm_hs_out_desc,
234 NULL,
235};
236
237static struct usb_endpoint_descriptor acm_ss_in_desc = {
238 .bLength = USB_DT_ENDPOINT_SIZE,
239 .bDescriptorType = USB_DT_ENDPOINT,
240 .bmAttributes = USB_ENDPOINT_XFER_BULK,
241 .wMaxPacketSize = cpu_to_le16(1024),
242};
243
244static struct usb_endpoint_descriptor acm_ss_out_desc = {
245 .bLength = USB_DT_ENDPOINT_SIZE,
246 .bDescriptorType = USB_DT_ENDPOINT,
247 .bmAttributes = USB_ENDPOINT_XFER_BULK,
248 .wMaxPacketSize = cpu_to_le16(1024),
249};
250
251static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
252 .bLength = sizeof acm_ss_bulk_comp_desc,
253 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
254};
255
256static struct usb_descriptor_header *acm_ss_function[] = {
257 (struct usb_descriptor_header *) &acm_iad_descriptor,
258 (struct usb_descriptor_header *) &acm_control_interface_desc,
259 (struct usb_descriptor_header *) &acm_header_desc,
260 (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
261 (struct usb_descriptor_header *) &acm_descriptor,
262 (struct usb_descriptor_header *) &acm_union_desc,
263 (struct usb_descriptor_header *) &acm_hs_notify_desc,
264 (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
265 (struct usb_descriptor_header *) &acm_data_interface_desc,
266 (struct usb_descriptor_header *) &acm_ss_in_desc,
267 (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
268 (struct usb_descriptor_header *) &acm_ss_out_desc,
269 (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
270 NULL,
271};
272
273/* string descriptors: */
274
275#define ACM_CTRL_IDX 0
276#define ACM_DATA_IDX 1
277#define ACM_IAD_IDX 2
278
279/* static strings, in UTF-8 */
280static struct usb_string acm_string_defs[] = {
281 [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
282 [ACM_DATA_IDX].s = "CDC ACM Data",
283 [ACM_IAD_IDX ].s = "CDC Serial",
284 { } /* end of list */
285};
286
287static struct usb_gadget_strings acm_string_table = {
288 .language = 0x0409, /* en-us */
289 .strings = acm_string_defs,
290};
291
292static struct usb_gadget_strings *acm_strings[] = {
293 &acm_string_table,
294 NULL,
295};
296
297/*-------------------------------------------------------------------------*/
298
299/* ACM control ... data handling is delegated to tty library code.
300 * The main task of this function is to activate and deactivate
301 * that code based on device state; track parameters like line
302 * speed, handshake state, and so on; and issue notifications.
303 */
304
305static void acm_complete_set_line_coding(struct usb_ep *ep,
306 struct usb_request *req)
307{
308 struct f_acm *acm = ep->driver_data;
309 struct usb_composite_dev *cdev = acm->port.func.config->cdev;
310
311 if (req->status != 0) {
312 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n",
313 acm->port_num, req->status);
314 return;
315 }
316
317 /* normal completion */
318 if (req->actual != sizeof(acm->port_line_coding)) {
319 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n",
320 acm->port_num, req->actual);
321 usb_ep_set_halt(ep);
322 } else {
323 struct usb_cdc_line_coding *value = req->buf;
324
325 /* REVISIT: we currently just remember this data.
326 * If we change that, (a) validate it first, then
327 * (b) update whatever hardware needs updating,
328 * (c) worry about locking. This is information on
329 * the order of 9600-8-N-1 ... most of which means
330 * nothing unless we control a real RS232 line.
331 */
332 acm->port_line_coding = *value;
333 }
334}
335
336static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
337{
338 struct f_acm *acm = func_to_acm(f);
339 struct usb_composite_dev *cdev = f->config->cdev;
340 struct usb_request *req = cdev->req;
341 int value = -EOPNOTSUPP;
342 u16 w_index = le16_to_cpu(ctrl->wIndex);
343 u16 w_value = le16_to_cpu(ctrl->wValue);
344 u16 w_length = le16_to_cpu(ctrl->wLength);
345
346 /* composite driver infrastructure handles everything except
347 * CDC class messages; interface activation uses set_alt().
348 *
349 * Note CDC spec table 4 lists the ACM request profile. It requires
350 * encapsulated command support ... we don't handle any, and respond
351 * to them by stalling. Options include get/set/clear comm features
352 * (not that useful) and SEND_BREAK.
353 */
354 switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
355
356 /* SET_LINE_CODING ... just read and save what the host sends */
357 case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
358 | USB_CDC_REQ_SET_LINE_CODING:
359 if (w_length != sizeof(struct usb_cdc_line_coding)
360 || w_index != acm->ctrl_id)
361 goto invalid;
362
363 value = w_length;
364 cdev->gadget->ep0->driver_data = acm;
365 req->complete = acm_complete_set_line_coding;
366 break;
367
368 /* GET_LINE_CODING ... return what host sent, or initial value */
369 case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
370 | USB_CDC_REQ_GET_LINE_CODING:
371 if (w_index != acm->ctrl_id)
372 goto invalid;
373
374 value = min_t(unsigned, w_length,
375 sizeof(struct usb_cdc_line_coding));
376 memcpy(req->buf, &acm->port_line_coding, value);
377 break;
378
379 /* SET_CONTROL_LINE_STATE ... save what the host sent */
380 case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
381 | USB_CDC_REQ_SET_CONTROL_LINE_STATE:
382 if (w_index != acm->ctrl_id)
383 goto invalid;
384
385 value = 0;
386
387 /* FIXME we should not allow data to flow until the
388 * host sets the ACM_CTRL_DTR bit; and when it clears
389 * that bit, we should return to that no-flow state.
390 */
391 acm->port_handshake_bits = w_value;
392 break;
393
394 default:
395invalid:
396 dev_vdbg(&cdev->gadget->dev,
397 "invalid control req%02x.%02x v%04x i%04x l%d\n",
398 ctrl->bRequestType, ctrl->bRequest,
399 w_value, w_index, w_length);
400 }
401
402 /* respond with data transfer or status phase? */
403 if (value >= 0) {
404 dev_dbg(&cdev->gadget->dev,
405 "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
406 acm->port_num, ctrl->bRequestType, ctrl->bRequest,
407 w_value, w_index, w_length);
408 req->zero = 0;
409 req->length = value;
410 value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
411 if (value < 0)
412 ERROR(cdev, "acm response on ttyGS%d, err %d\n",
413 acm->port_num, value);
414 }
415
416 /* device either stalls (value < 0) or reports success */
417 return value;
418}
419
420static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
421{
422 struct f_acm *acm = func_to_acm(f);
423 struct usb_composite_dev *cdev = f->config->cdev;
424
425 /* we know alt == 0, so this is an activation or a reset */
426
427 if (intf == acm->ctrl_id) {
428 dev_vdbg(&cdev->gadget->dev,
429 "reset acm control interface %d\n", intf);
430 usb_ep_disable(acm->notify);
431
432 if (!acm->notify->desc)
433 if (config_ep_by_speed(cdev->gadget, f, acm->notify))
434 return -EINVAL;
435
436 usb_ep_enable(acm->notify);
437
438 } else if (intf == acm->data_id) {
439 if (acm->notify->enabled) {
440 dev_dbg(&cdev->gadget->dev,
441 "reset acm ttyGS%d\n", acm->port_num);
442 gserial_disconnect(&acm->port);
443 }
444 if (!acm->port.in->desc || !acm->port.out->desc) {
445 dev_dbg(&cdev->gadget->dev,
446 "activate acm ttyGS%d\n", acm->port_num);
447 if (config_ep_by_speed(cdev->gadget, f,
448 acm->port.in) ||
449 config_ep_by_speed(cdev->gadget, f,
450 acm->port.out)) {
451 acm->port.in->desc = NULL;
452 acm->port.out->desc = NULL;
453 return -EINVAL;
454 }
455 }
456 gserial_connect(&acm->port, acm->port_num);
457
458 } else
459 return -EINVAL;
460
461 return 0;
462}
463
464static void acm_disable(struct usb_function *f)
465{
466 struct f_acm *acm = func_to_acm(f);
467 struct usb_composite_dev *cdev = f->config->cdev;
468
469 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num);
470 gserial_disconnect(&acm->port);
471 usb_ep_disable(acm->notify);
472}
473
474/*-------------------------------------------------------------------------*/
475
476/**
477 * acm_cdc_notify - issue CDC notification to host
478 * @acm: wraps host to be notified
479 * @type: notification type
480 * @value: Refer to cdc specs, wValue field.
481 * @data: data to be sent
482 * @length: size of data
483 * Context: irqs blocked, acm->lock held, acm_notify_req non-null
484 *
485 * Returns zero on success or a negative errno.
486 *
487 * See section 6.3.5 of the CDC 1.1 specification for information
488 * about the only notification we issue: SerialState change.
489 */
490static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
491 void *data, unsigned length)
492{
493 struct usb_ep *ep = acm->notify;
494 struct usb_request *req;
495 struct usb_cdc_notification *notify;
496 const unsigned len = sizeof(*notify) + length;
497 void *buf;
498 int status;
499
500 req = acm->notify_req;
501 acm->notify_req = NULL;
502 acm->pending = false;
503
504 req->length = len;
505 notify = req->buf;
506 buf = notify + 1;
507
508 notify->bmRequestType = USB_DIR_IN | USB_TYPE_CLASS
509 | USB_RECIP_INTERFACE;
510 notify->bNotificationType = type;
511 notify->wValue = cpu_to_le16(value);
512 notify->wIndex = cpu_to_le16(acm->ctrl_id);
513 notify->wLength = cpu_to_le16(length);
514 memcpy(buf, data, length);
515
516 /* ep_queue() can complete immediately if it fills the fifo... */
517 spin_unlock(&acm->lock);
518 status = usb_ep_queue(ep, req, GFP_ATOMIC);
519 spin_lock(&acm->lock);
520
521 if (status < 0) {
522 ERROR(acm->port.func.config->cdev,
523 "acm ttyGS%d can't notify serial state, %d\n",
524 acm->port_num, status);
525 acm->notify_req = req;
526 }
527
528 return status;
529}
530
531static int acm_notify_serial_state(struct f_acm *acm)
532{
533 struct usb_composite_dev *cdev = acm->port.func.config->cdev;
534 int status;
535 __le16 serial_state;
536
537 spin_lock(&acm->lock);
538 if (acm->notify_req) {
539 dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
540 acm->port_num, acm->serial_state);
541 serial_state = cpu_to_le16(acm->serial_state);
542 status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
543 0, &serial_state, sizeof(acm->serial_state));
544 } else {
545 acm->pending = true;
546 status = 0;
547 }
548 spin_unlock(&acm->lock);
549 return status;
550}
551
552static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
553{
554 struct f_acm *acm = req->context;
555 u8 doit = false;
556
557 /* on this call path we do NOT hold the port spinlock,
558 * which is why ACM needs its own spinlock
559 */
560 spin_lock(&acm->lock);
561 if (req->status != -ESHUTDOWN)
562 doit = acm->pending;
563 acm->notify_req = req;
564 spin_unlock(&acm->lock);
565
566 if (doit)
567 acm_notify_serial_state(acm);
568}
569
570/* connect == the TTY link is open */
571
572static void acm_connect(struct gserial *port)
573{
574 struct f_acm *acm = port_to_acm(port);
575
576 acm->serial_state |= ACM_CTRL_DSR | ACM_CTRL_DCD;
577 acm_notify_serial_state(acm);
578}
579
580static void acm_disconnect(struct gserial *port)
581{
582 struct f_acm *acm = port_to_acm(port);
583
584 acm->serial_state &= ~(ACM_CTRL_DSR | ACM_CTRL_DCD);
585 acm_notify_serial_state(acm);
586}
587
588static int acm_send_break(struct gserial *port, int duration)
589{
590 struct f_acm *acm = port_to_acm(port);
591 u16 state;
592
593 state = acm->serial_state;
594 state &= ~ACM_CTRL_BRK;
595 if (duration)
596 state |= ACM_CTRL_BRK;
597
598 acm->serial_state = state;
599 return acm_notify_serial_state(acm);
600}
601
602/*-------------------------------------------------------------------------*/
603
604/* ACM function driver setup/binding */
605static int
606acm_bind(struct usb_configuration *c, struct usb_function *f)
607{
608 struct usb_composite_dev *cdev = c->cdev;
609 struct f_acm *acm = func_to_acm(f);
610 struct usb_string *us;
611 int status;
612 struct usb_ep *ep;
613
614 /* REVISIT might want instance-specific strings to help
615 * distinguish instances ...
616 */
617
618 /* maybe allocate device-global string IDs, and patch descriptors */
619 us = usb_gstrings_attach(cdev, acm_strings,
620 ARRAY_SIZE(acm_string_defs));
621 if (IS_ERR(us))
622 return PTR_ERR(us);
623 acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
624 acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
625 acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
626
627 /* allocate instance-specific interface IDs, and patch descriptors */
628 status = usb_interface_id(c, f);
629 if (status < 0)
630 goto fail;
631 acm->ctrl_id = status;
632 acm_iad_descriptor.bFirstInterface = status;
633
634 acm_control_interface_desc.bInterfaceNumber = status;
635 acm_union_desc .bMasterInterface0 = status;
636
637 status = usb_interface_id(c, f);
638 if (status < 0)
639 goto fail;
640 acm->data_id = status;
641
642 acm_data_interface_desc.bInterfaceNumber = status;
643 acm_union_desc.bSlaveInterface0 = status;
644 acm_call_mgmt_descriptor.bDataInterface = status;
645
646 status = -ENODEV;
647
648 /* allocate instance-specific endpoints */
649 ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
650 if (!ep)
651 goto fail;
652 acm->port.in = ep;
653
654 ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
655 if (!ep)
656 goto fail;
657 acm->port.out = ep;
658
659 ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
660 if (!ep)
661 goto fail;
662 acm->notify = ep;
663
664 /* allocate notification */
665 acm->notify_req = gs_alloc_req(ep,
666 sizeof(struct usb_cdc_notification) + 2,
667 GFP_KERNEL);
668 if (!acm->notify_req)
669 goto fail;
670
671 acm->notify_req->complete = acm_cdc_notify_complete;
672 acm->notify_req->context = acm;
673
674 /* support all relevant hardware speeds... we expect that when
675 * hardware is dual speed, all bulk-capable endpoints work at
676 * both speeds
677 */
678 acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
679 acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
680 acm_hs_notify_desc.bEndpointAddress =
681 acm_fs_notify_desc.bEndpointAddress;
682
683 acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
684 acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
685
686 status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
687 acm_ss_function, NULL);
688 if (status)
689 goto fail;
690
691 dev_dbg(&cdev->gadget->dev,
692 "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
693 acm->port_num,
694 gadget_is_superspeed(c->cdev->gadget) ? "super" :
695 gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
696 acm->port.in->name, acm->port.out->name,
697 acm->notify->name);
698 return 0;
699
700fail:
701 if (acm->notify_req)
702 gs_free_req(acm->notify, acm->notify_req);
703
704 ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
705
706 return status;
707}
708
709static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
710{
711 struct f_acm *acm = func_to_acm(f);
712
713 acm_string_defs[0].id = 0;
714 usb_free_all_descriptors(f);
715 if (acm->notify_req)
716 gs_free_req(acm->notify, acm->notify_req);
717}
718
719static void acm_free_func(struct usb_function *f)
720{
721 struct f_acm *acm = func_to_acm(f);
722
723 kfree(acm);
724}
725
726static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
727{
728 struct f_serial_opts *opts;
729 struct f_acm *acm;
730
731 acm = kzalloc(sizeof(*acm), GFP_KERNEL);
732 if (!acm)
733 return ERR_PTR(-ENOMEM);
734
735 spin_lock_init(&acm->lock);
736
737 acm->port.connect = acm_connect;
738 acm->port.disconnect = acm_disconnect;
739 acm->port.send_break = acm_send_break;
740
741 acm->port.func.name = "acm";
742 acm->port.func.strings = acm_strings;
743 /* descriptors are per-instance copies */
744 acm->port.func.bind = acm_bind;
745 acm->port.func.set_alt = acm_set_alt;
746 acm->port.func.setup = acm_setup;
747 acm->port.func.disable = acm_disable;
748
749 opts = container_of(fi, struct f_serial_opts, func_inst);
750 acm->port_num = opts->port_num;
751 acm->port.func.unbind = acm_unbind;
752 acm->port.func.free_func = acm_free_func;
753
754 return &acm->port.func;
755}
756
757static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
758{
759 return container_of(to_config_group(item), struct f_serial_opts,
760 func_inst.group);
761}
762
763static void acm_attr_release(struct config_item *item)
764{
765 struct f_serial_opts *opts = to_f_serial_opts(item);
766
767 usb_put_function_instance(&opts->func_inst);
768}
769
770static struct configfs_item_operations acm_item_ops = {
771 .release = acm_attr_release,
772};
773
774static ssize_t f_acm_port_num_show(struct config_item *item, char *page)
775{
776 return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
777}
778
779CONFIGFS_ATTR_RO(f_acm_, port_num);
780
781static struct configfs_attribute *acm_attrs[] = {
782 &f_acm_attr_port_num,
783 NULL,
784};
785
786static const struct config_item_type acm_func_type = {
787 .ct_item_ops = &acm_item_ops,
788 .ct_attrs = acm_attrs,
789 .ct_owner = THIS_MODULE,
790};
791
792static void acm_free_instance(struct usb_function_instance *fi)
793{
794 struct f_serial_opts *opts;
795
796 opts = container_of(fi, struct f_serial_opts, func_inst);
797 gserial_free_line(opts->port_num);
798 kfree(opts);
799}
800
801static struct usb_function_instance *acm_alloc_instance(void)
802{
803 struct f_serial_opts *opts;
804 int ret;
805
806 opts = kzalloc(sizeof(*opts), GFP_KERNEL);
807 if (!opts)
808 return ERR_PTR(-ENOMEM);
809 opts->func_inst.free_func_inst = acm_free_instance;
810 ret = gserial_alloc_line(&opts->port_num);
811 if (ret) {
812 kfree(opts);
813 return ERR_PTR(ret);
814 }
815 config_group_init_type_name(&opts->func_inst.group, "",
816 &acm_func_type);
817 return &opts->func_inst;
818}
819DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
820MODULE_LICENSE("GPL");