Loading...
1/*
2 * Seiko Instruments S-35390A RTC Driver
3 *
4 * Copyright (c) 2007 Byron Bradley
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10 */
11
12#include <linux/module.h>
13#include <linux/rtc.h>
14#include <linux/i2c.h>
15#include <linux/bitrev.h>
16#include <linux/bcd.h>
17#include <linux/slab.h>
18
19#define S35390A_CMD_STATUS1 0
20#define S35390A_CMD_STATUS2 1
21#define S35390A_CMD_TIME1 2
22
23#define S35390A_BYTE_YEAR 0
24#define S35390A_BYTE_MONTH 1
25#define S35390A_BYTE_DAY 2
26#define S35390A_BYTE_WDAY 3
27#define S35390A_BYTE_HOURS 4
28#define S35390A_BYTE_MINS 5
29#define S35390A_BYTE_SECS 6
30
31#define S35390A_FLAG_POC 0x01
32#define S35390A_FLAG_BLD 0x02
33#define S35390A_FLAG_24H 0x40
34#define S35390A_FLAG_RESET 0x80
35#define S35390A_FLAG_TEST 0x01
36
37static const struct i2c_device_id s35390a_id[] = {
38 { "s35390a", 0 },
39 { }
40};
41MODULE_DEVICE_TABLE(i2c, s35390a_id);
42
43struct s35390a {
44 struct i2c_client *client[8];
45 struct rtc_device *rtc;
46 int twentyfourhour;
47};
48
49static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
50{
51 struct i2c_client *client = s35390a->client[reg];
52 struct i2c_msg msg[] = {
53 { client->addr, 0, len, buf },
54 };
55
56 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
57 return -EIO;
58
59 return 0;
60}
61
62static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
63{
64 struct i2c_client *client = s35390a->client[reg];
65 struct i2c_msg msg[] = {
66 { client->addr, I2C_M_RD, len, buf },
67 };
68
69 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
70 return -EIO;
71
72 return 0;
73}
74
75static int s35390a_reset(struct s35390a *s35390a)
76{
77 char buf[1];
78
79 if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0)
80 return -EIO;
81
82 if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD)))
83 return 0;
84
85 buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H);
86 buf[0] &= 0xf0;
87 return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
88}
89
90static int s35390a_disable_test_mode(struct s35390a *s35390a)
91{
92 char buf[1];
93
94 if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
95 return -EIO;
96
97 if (!(buf[0] & S35390A_FLAG_TEST))
98 return 0;
99
100 buf[0] &= ~S35390A_FLAG_TEST;
101 return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
102}
103
104static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
105{
106 if (s35390a->twentyfourhour)
107 return bin2bcd(hour);
108
109 if (hour < 12)
110 return bin2bcd(hour);
111
112 return 0x40 | bin2bcd(hour - 12);
113}
114
115static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
116{
117 unsigned hour;
118
119 if (s35390a->twentyfourhour)
120 return bcd2bin(reg & 0x3f);
121
122 hour = bcd2bin(reg & 0x3f);
123 if (reg & 0x40)
124 hour += 12;
125
126 return hour;
127}
128
129static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm)
130{
131 struct s35390a *s35390a = i2c_get_clientdata(client);
132 int i, err;
133 char buf[7];
134
135 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
136 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
137 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
138 tm->tm_wday);
139
140 buf[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 100);
141 buf[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon + 1);
142 buf[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
143 buf[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
144 buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
145 buf[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
146 buf[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
147
148 /* This chip expects the bits of each byte to be in reverse order */
149 for (i = 0; i < 7; ++i)
150 buf[i] = bitrev8(buf[i]);
151
152 err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
153
154 return err;
155}
156
157static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm)
158{
159 struct s35390a *s35390a = i2c_get_clientdata(client);
160 char buf[7];
161 int i, err;
162
163 err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
164 if (err < 0)
165 return err;
166
167 /* This chip returns the bits of each byte in reverse order */
168 for (i = 0; i < 7; ++i)
169 buf[i] = bitrev8(buf[i]);
170
171 tm->tm_sec = bcd2bin(buf[S35390A_BYTE_SECS]);
172 tm->tm_min = bcd2bin(buf[S35390A_BYTE_MINS]);
173 tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
174 tm->tm_wday = bcd2bin(buf[S35390A_BYTE_WDAY]);
175 tm->tm_mday = bcd2bin(buf[S35390A_BYTE_DAY]);
176 tm->tm_mon = bcd2bin(buf[S35390A_BYTE_MONTH]) - 1;
177 tm->tm_year = bcd2bin(buf[S35390A_BYTE_YEAR]) + 100;
178
179 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
180 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
181 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
182 tm->tm_wday);
183
184 return rtc_valid_tm(tm);
185}
186
187static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
188{
189 return s35390a_get_datetime(to_i2c_client(dev), tm);
190}
191
192static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
193{
194 return s35390a_set_datetime(to_i2c_client(dev), tm);
195}
196
197static const struct rtc_class_ops s35390a_rtc_ops = {
198 .read_time = s35390a_rtc_read_time,
199 .set_time = s35390a_rtc_set_time,
200};
201
202static struct i2c_driver s35390a_driver;
203
204static int s35390a_probe(struct i2c_client *client,
205 const struct i2c_device_id *id)
206{
207 int err;
208 unsigned int i;
209 struct s35390a *s35390a;
210 struct rtc_time tm;
211 char buf[1];
212
213 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
214 err = -ENODEV;
215 goto exit;
216 }
217
218 s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL);
219 if (!s35390a) {
220 err = -ENOMEM;
221 goto exit;
222 }
223
224 s35390a->client[0] = client;
225 i2c_set_clientdata(client, s35390a);
226
227 /* This chip uses multiple addresses, use dummy devices for them */
228 for (i = 1; i < 8; ++i) {
229 s35390a->client[i] = i2c_new_dummy(client->adapter,
230 client->addr + i);
231 if (!s35390a->client[i]) {
232 dev_err(&client->dev, "Address %02x unavailable\n",
233 client->addr + i);
234 err = -EBUSY;
235 goto exit_dummy;
236 }
237 }
238
239 err = s35390a_reset(s35390a);
240 if (err < 0) {
241 dev_err(&client->dev, "error resetting chip\n");
242 goto exit_dummy;
243 }
244
245 err = s35390a_disable_test_mode(s35390a);
246 if (err < 0) {
247 dev_err(&client->dev, "error disabling test mode\n");
248 goto exit_dummy;
249 }
250
251 err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
252 if (err < 0) {
253 dev_err(&client->dev, "error checking 12/24 hour mode\n");
254 goto exit_dummy;
255 }
256 if (buf[0] & S35390A_FLAG_24H)
257 s35390a->twentyfourhour = 1;
258 else
259 s35390a->twentyfourhour = 0;
260
261 if (s35390a_get_datetime(client, &tm) < 0)
262 dev_warn(&client->dev, "clock needs to be set\n");
263
264 s35390a->rtc = rtc_device_register(s35390a_driver.driver.name,
265 &client->dev, &s35390a_rtc_ops, THIS_MODULE);
266
267 if (IS_ERR(s35390a->rtc)) {
268 err = PTR_ERR(s35390a->rtc);
269 goto exit_dummy;
270 }
271 return 0;
272
273exit_dummy:
274 for (i = 1; i < 8; ++i)
275 if (s35390a->client[i])
276 i2c_unregister_device(s35390a->client[i]);
277 kfree(s35390a);
278
279exit:
280 return err;
281}
282
283static int s35390a_remove(struct i2c_client *client)
284{
285 unsigned int i;
286
287 struct s35390a *s35390a = i2c_get_clientdata(client);
288 for (i = 1; i < 8; ++i)
289 if (s35390a->client[i])
290 i2c_unregister_device(s35390a->client[i]);
291
292 rtc_device_unregister(s35390a->rtc);
293 kfree(s35390a);
294
295 return 0;
296}
297
298static struct i2c_driver s35390a_driver = {
299 .driver = {
300 .name = "rtc-s35390a",
301 },
302 .probe = s35390a_probe,
303 .remove = s35390a_remove,
304 .id_table = s35390a_id,
305};
306
307static int __init s35390a_rtc_init(void)
308{
309 return i2c_add_driver(&s35390a_driver);
310}
311
312static void __exit s35390a_rtc_exit(void)
313{
314 i2c_del_driver(&s35390a_driver);
315}
316
317MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
318MODULE_DESCRIPTION("S35390A RTC driver");
319MODULE_LICENSE("GPL");
320
321module_init(s35390a_rtc_init);
322module_exit(s35390a_rtc_exit);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Seiko Instruments S-35390A RTC Driver
4 *
5 * Copyright (c) 2007 Byron Bradley
6 */
7
8#include <linux/module.h>
9#include <linux/rtc.h>
10#include <linux/i2c.h>
11#include <linux/bitrev.h>
12#include <linux/bcd.h>
13#include <linux/slab.h>
14#include <linux/delay.h>
15
16#define S35390A_CMD_STATUS1 0
17#define S35390A_CMD_STATUS2 1
18#define S35390A_CMD_TIME1 2
19#define S35390A_CMD_TIME2 3
20#define S35390A_CMD_INT2_REG1 5
21
22#define S35390A_BYTE_YEAR 0
23#define S35390A_BYTE_MONTH 1
24#define S35390A_BYTE_DAY 2
25#define S35390A_BYTE_WDAY 3
26#define S35390A_BYTE_HOURS 4
27#define S35390A_BYTE_MINS 5
28#define S35390A_BYTE_SECS 6
29
30#define S35390A_ALRM_BYTE_WDAY 0
31#define S35390A_ALRM_BYTE_HOURS 1
32#define S35390A_ALRM_BYTE_MINS 2
33
34/* flags for STATUS1 */
35#define S35390A_FLAG_POC BIT(0)
36#define S35390A_FLAG_BLD BIT(1)
37#define S35390A_FLAG_INT2 BIT(2)
38#define S35390A_FLAG_24H BIT(6)
39#define S35390A_FLAG_RESET BIT(7)
40
41/* flag for STATUS2 */
42#define S35390A_FLAG_TEST BIT(0)
43
44/* INT2 pin output mode */
45#define S35390A_INT2_MODE_MASK 0x0E
46#define S35390A_INT2_MODE_NOINTR 0x00
47#define S35390A_INT2_MODE_ALARM BIT(1) /* INT2AE */
48#define S35390A_INT2_MODE_PMIN_EDG BIT(2) /* INT2ME */
49#define S35390A_INT2_MODE_FREQ BIT(3) /* INT2FE */
50#define S35390A_INT2_MODE_PMIN (BIT(3) | BIT(2)) /* INT2FE | INT2ME */
51
52static const struct i2c_device_id s35390a_id[] = {
53 { "s35390a", 0 },
54 { }
55};
56MODULE_DEVICE_TABLE(i2c, s35390a_id);
57
58static const struct of_device_id s35390a_of_match[] = {
59 { .compatible = "s35390a" },
60 { .compatible = "sii,s35390a" },
61 { }
62};
63MODULE_DEVICE_TABLE(of, s35390a_of_match);
64
65struct s35390a {
66 struct i2c_client *client[8];
67 struct rtc_device *rtc;
68 int twentyfourhour;
69};
70
71static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
72{
73 struct i2c_client *client = s35390a->client[reg];
74 struct i2c_msg msg[] = {
75 {
76 .addr = client->addr,
77 .len = len,
78 .buf = buf
79 },
80 };
81
82 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
83 return -EIO;
84
85 return 0;
86}
87
88static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
89{
90 struct i2c_client *client = s35390a->client[reg];
91 struct i2c_msg msg[] = {
92 {
93 .addr = client->addr,
94 .flags = I2C_M_RD,
95 .len = len,
96 .buf = buf
97 },
98 };
99
100 if ((i2c_transfer(client->adapter, msg, 1)) != 1)
101 return -EIO;
102
103 return 0;
104}
105
106static int s35390a_init(struct s35390a *s35390a)
107{
108 u8 buf;
109 int ret;
110 unsigned initcount = 0;
111
112 /*
113 * At least one of POC and BLD are set, so reinitialise chip. Keeping
114 * this information in the hardware to know later that the time isn't
115 * valid is unfortunately not possible because POC and BLD are cleared
116 * on read. So the reset is best done now.
117 *
118 * The 24H bit is kept over reset, so set it already here.
119 */
120initialize:
121 buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
122 ret = s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
123
124 if (ret < 0)
125 return ret;
126
127 ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1);
128 if (ret < 0)
129 return ret;
130
131 if (buf & (S35390A_FLAG_POC | S35390A_FLAG_BLD)) {
132 /* Try up to five times to reset the chip */
133 if (initcount < 5) {
134 ++initcount;
135 goto initialize;
136 } else
137 return -EIO;
138 }
139
140 return 1;
141}
142
143/*
144 * Returns <0 on error, 0 if rtc is setup fine and 1 if the chip was reset.
145 * To keep the information if an irq is pending, pass the value read from
146 * STATUS1 to the caller.
147 */
148static int s35390a_read_status(struct s35390a *s35390a, char *status1)
149{
150 int ret;
151
152 ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, status1, 1);
153 if (ret < 0)
154 return ret;
155
156 if (*status1 & S35390A_FLAG_POC) {
157 /*
158 * Do not communicate for 0.5 seconds since the power-on
159 * detection circuit is in operation.
160 */
161 msleep(500);
162 return 1;
163 } else if (*status1 & S35390A_FLAG_BLD)
164 return 1;
165 /*
166 * If both POC and BLD are unset everything is fine.
167 */
168 return 0;
169}
170
171static int s35390a_disable_test_mode(struct s35390a *s35390a)
172{
173 char buf[1];
174
175 if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
176 return -EIO;
177
178 if (!(buf[0] & S35390A_FLAG_TEST))
179 return 0;
180
181 buf[0] &= ~S35390A_FLAG_TEST;
182 return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
183}
184
185static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
186{
187 if (s35390a->twentyfourhour)
188 return bin2bcd(hour);
189
190 if (hour < 12)
191 return bin2bcd(hour);
192
193 return 0x40 | bin2bcd(hour - 12);
194}
195
196static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
197{
198 unsigned hour;
199
200 if (s35390a->twentyfourhour)
201 return bcd2bin(reg & 0x3f);
202
203 hour = bcd2bin(reg & 0x3f);
204 if (reg & 0x40)
205 hour += 12;
206
207 return hour;
208}
209
210static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
211{
212 struct i2c_client *client = to_i2c_client(dev);
213 struct s35390a *s35390a = i2c_get_clientdata(client);
214 int i, err;
215 char buf[7], status;
216
217 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
218 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
219 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
220 tm->tm_wday);
221
222 if (s35390a_read_status(s35390a, &status) == 1)
223 s35390a_init(s35390a);
224
225 buf[S35390A_BYTE_YEAR] = bin2bcd(tm->tm_year - 100);
226 buf[S35390A_BYTE_MONTH] = bin2bcd(tm->tm_mon + 1);
227 buf[S35390A_BYTE_DAY] = bin2bcd(tm->tm_mday);
228 buf[S35390A_BYTE_WDAY] = bin2bcd(tm->tm_wday);
229 buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
230 buf[S35390A_BYTE_MINS] = bin2bcd(tm->tm_min);
231 buf[S35390A_BYTE_SECS] = bin2bcd(tm->tm_sec);
232
233 /* This chip expects the bits of each byte to be in reverse order */
234 for (i = 0; i < 7; ++i)
235 buf[i] = bitrev8(buf[i]);
236
237 err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
238
239 return err;
240}
241
242static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
243{
244 struct i2c_client *client = to_i2c_client(dev);
245 struct s35390a *s35390a = i2c_get_clientdata(client);
246 char buf[7], status;
247 int i, err;
248
249 if (s35390a_read_status(s35390a, &status) == 1)
250 return -EINVAL;
251
252 err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
253 if (err < 0)
254 return err;
255
256 /* This chip returns the bits of each byte in reverse order */
257 for (i = 0; i < 7; ++i)
258 buf[i] = bitrev8(buf[i]);
259
260 tm->tm_sec = bcd2bin(buf[S35390A_BYTE_SECS]);
261 tm->tm_min = bcd2bin(buf[S35390A_BYTE_MINS]);
262 tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
263 tm->tm_wday = bcd2bin(buf[S35390A_BYTE_WDAY]);
264 tm->tm_mday = bcd2bin(buf[S35390A_BYTE_DAY]);
265 tm->tm_mon = bcd2bin(buf[S35390A_BYTE_MONTH]) - 1;
266 tm->tm_year = bcd2bin(buf[S35390A_BYTE_YEAR]) + 100;
267
268 dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
269 "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
270 tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
271 tm->tm_wday);
272
273 return 0;
274}
275
276static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
277{
278 struct i2c_client *client = to_i2c_client(dev);
279 struct s35390a *s35390a = i2c_get_clientdata(client);
280 char buf[3], sts = 0;
281 int err, i;
282
283 dev_dbg(&client->dev, "%s: alm is secs=%d, mins=%d, hours=%d mday=%d, "\
284 "mon=%d, year=%d, wday=%d\n", __func__, alm->time.tm_sec,
285 alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
286 alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
287
288 if (alm->time.tm_sec != 0)
289 dev_warn(&client->dev, "Alarms are only supported on a per minute basis!\n");
290
291 /* disable interrupt (which deasserts the irq line) */
292 err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
293 if (err < 0)
294 return err;
295
296 /* clear pending interrupt (in STATUS1 only), if any */
297 err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts));
298 if (err < 0)
299 return err;
300
301 if (alm->enabled)
302 sts = S35390A_INT2_MODE_ALARM;
303 else
304 sts = S35390A_INT2_MODE_NOINTR;
305
306 /* set interupt mode*/
307 err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
308 if (err < 0)
309 return err;
310
311 if (alm->time.tm_wday != -1)
312 buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80;
313 else
314 buf[S35390A_ALRM_BYTE_WDAY] = 0;
315
316 buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a,
317 alm->time.tm_hour) | 0x80;
318 buf[S35390A_ALRM_BYTE_MINS] = bin2bcd(alm->time.tm_min) | 0x80;
319
320 if (alm->time.tm_hour >= 12)
321 buf[S35390A_ALRM_BYTE_HOURS] |= 0x40;
322
323 for (i = 0; i < 3; ++i)
324 buf[i] = bitrev8(buf[i]);
325
326 err = s35390a_set_reg(s35390a, S35390A_CMD_INT2_REG1, buf,
327 sizeof(buf));
328
329 return err;
330}
331
332static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
333{
334 struct i2c_client *client = to_i2c_client(dev);
335 struct s35390a *s35390a = i2c_get_clientdata(client);
336 char buf[3], sts;
337 int i, err;
338
339 err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
340 if (err < 0)
341 return err;
342
343 if ((sts & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) {
344 /*
345 * When the alarm isn't enabled, the register to configure
346 * the alarm time isn't accessible.
347 */
348 alm->enabled = 0;
349 return 0;
350 } else {
351 alm->enabled = 1;
352 }
353
354 err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf));
355 if (err < 0)
356 return err;
357
358 /* This chip returns the bits of each byte in reverse order */
359 for (i = 0; i < 3; ++i)
360 buf[i] = bitrev8(buf[i]);
361
362 /*
363 * B0 of the three matching registers is an enable flag. Iff it is set
364 * the configured value is used for matching.
365 */
366 if (buf[S35390A_ALRM_BYTE_WDAY] & 0x80)
367 alm->time.tm_wday =
368 bcd2bin(buf[S35390A_ALRM_BYTE_WDAY] & ~0x80);
369
370 if (buf[S35390A_ALRM_BYTE_HOURS] & 0x80)
371 alm->time.tm_hour =
372 s35390a_reg2hr(s35390a,
373 buf[S35390A_ALRM_BYTE_HOURS] & ~0x80);
374
375 if (buf[S35390A_ALRM_BYTE_MINS] & 0x80)
376 alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS] & ~0x80);
377
378 /* alarm triggers always at s=0 */
379 alm->time.tm_sec = 0;
380
381 dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n",
382 __func__, alm->time.tm_min, alm->time.tm_hour,
383 alm->time.tm_wday);
384
385 return 0;
386}
387
388static int s35390a_rtc_ioctl(struct device *dev, unsigned int cmd,
389 unsigned long arg)
390{
391 struct i2c_client *client = to_i2c_client(dev);
392 struct s35390a *s35390a = i2c_get_clientdata(client);
393 char sts;
394 int err;
395
396 switch (cmd) {
397 case RTC_VL_READ:
398 /* s35390a_reset set lowvoltage flag and init RTC if needed */
399 err = s35390a_read_status(s35390a, &sts);
400 if (err < 0)
401 return err;
402 if (copy_to_user((void __user *)arg, &err, sizeof(int)))
403 return -EFAULT;
404 break;
405 case RTC_VL_CLR:
406 /* update flag and clear register */
407 err = s35390a_init(s35390a);
408 if (err < 0)
409 return err;
410 break;
411 default:
412 return -ENOIOCTLCMD;
413 }
414
415 return 0;
416}
417
418static const struct rtc_class_ops s35390a_rtc_ops = {
419 .read_time = s35390a_rtc_read_time,
420 .set_time = s35390a_rtc_set_time,
421 .set_alarm = s35390a_rtc_set_alarm,
422 .read_alarm = s35390a_rtc_read_alarm,
423 .ioctl = s35390a_rtc_ioctl,
424};
425
426static struct i2c_driver s35390a_driver;
427
428static int s35390a_probe(struct i2c_client *client,
429 const struct i2c_device_id *id)
430{
431 int err, err_read;
432 unsigned int i;
433 struct s35390a *s35390a;
434 char buf, status1;
435 struct device *dev = &client->dev;
436
437 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
438 return -ENODEV;
439
440 s35390a = devm_kzalloc(dev, sizeof(struct s35390a), GFP_KERNEL);
441 if (!s35390a)
442 return -ENOMEM;
443
444 s35390a->client[0] = client;
445 i2c_set_clientdata(client, s35390a);
446
447 /* This chip uses multiple addresses, use dummy devices for them */
448 for (i = 1; i < 8; ++i) {
449 s35390a->client[i] = devm_i2c_new_dummy_device(dev,
450 client->adapter,
451 client->addr + i);
452 if (IS_ERR(s35390a->client[i])) {
453 dev_err(dev, "Address %02x unavailable\n",
454 client->addr + i);
455 return PTR_ERR(s35390a->client[i]);
456 }
457 }
458
459 err_read = s35390a_read_status(s35390a, &status1);
460 if (err_read < 0) {
461 dev_err(dev, "error resetting chip\n");
462 return err_read;
463 }
464
465 if (status1 & S35390A_FLAG_24H)
466 s35390a->twentyfourhour = 1;
467 else
468 s35390a->twentyfourhour = 0;
469
470 if (status1 & S35390A_FLAG_INT2) {
471 /* disable alarm (and maybe test mode) */
472 buf = 0;
473 err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
474 if (err < 0) {
475 dev_err(dev, "error disabling alarm");
476 return err;
477 }
478 } else {
479 err = s35390a_disable_test_mode(s35390a);
480 if (err < 0) {
481 dev_err(dev, "error disabling test mode\n");
482 return err;
483 }
484 }
485
486 device_set_wakeup_capable(dev, 1);
487
488 s35390a->rtc = devm_rtc_device_register(dev, s35390a_driver.driver.name,
489 &s35390a_rtc_ops, THIS_MODULE);
490
491 if (IS_ERR(s35390a->rtc))
492 return PTR_ERR(s35390a->rtc);
493
494 /* supports per-minute alarms only, therefore set uie_unsupported */
495 s35390a->rtc->uie_unsupported = 1;
496
497 if (status1 & S35390A_FLAG_INT2)
498 rtc_update_irq(s35390a->rtc, 1, RTC_AF);
499
500 return 0;
501}
502
503static struct i2c_driver s35390a_driver = {
504 .driver = {
505 .name = "rtc-s35390a",
506 .of_match_table = of_match_ptr(s35390a_of_match),
507 },
508 .probe = s35390a_probe,
509 .id_table = s35390a_id,
510};
511
512module_i2c_driver(s35390a_driver);
513
514MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
515MODULE_DESCRIPTION("S35390A RTC driver");
516MODULE_LICENSE("GPL");