Loading...
1/*
2 * Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the Free
6 * Software Foundation; either version 2 of the License, or (at your option)
7 * any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59
16 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 */
22
23#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
24
25#include <linux/skbuff.h>
26#include <linux/if_ether.h>
27#include <linux/netdevice.h>
28#include <linux/spinlock.h>
29#include <linux/ethtool.h>
30#include <linux/etherdevice.h>
31#include <linux/if_bonding.h>
32#include <linux/pkt_sched.h>
33#include <net/net_namespace.h>
34#include "bonding.h"
35#include "bond_3ad.h"
36
37// General definitions
38#define AD_SHORT_TIMEOUT 1
39#define AD_LONG_TIMEOUT 0
40#define AD_STANDBY 0x2
41#define AD_MAX_TX_IN_SECOND 3
42#define AD_COLLECTOR_MAX_DELAY 0
43
44// Timer definitions(43.4.4 in the 802.3ad standard)
45#define AD_FAST_PERIODIC_TIME 1
46#define AD_SLOW_PERIODIC_TIME 30
47#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME)
48#define AD_LONG_TIMEOUT_TIME (3*AD_SLOW_PERIODIC_TIME)
49#define AD_CHURN_DETECTION_TIME 60
50#define AD_AGGREGATE_WAIT_TIME 2
51
52// Port state definitions(43.4.2.2 in the 802.3ad standard)
53#define AD_STATE_LACP_ACTIVITY 0x1
54#define AD_STATE_LACP_TIMEOUT 0x2
55#define AD_STATE_AGGREGATION 0x4
56#define AD_STATE_SYNCHRONIZATION 0x8
57#define AD_STATE_COLLECTING 0x10
58#define AD_STATE_DISTRIBUTING 0x20
59#define AD_STATE_DEFAULTED 0x40
60#define AD_STATE_EXPIRED 0x80
61
62// Port Variables definitions used by the State Machines(43.4.7 in the 802.3ad standard)
63#define AD_PORT_BEGIN 0x1
64#define AD_PORT_LACP_ENABLED 0x2
65#define AD_PORT_ACTOR_CHURN 0x4
66#define AD_PORT_PARTNER_CHURN 0x8
67#define AD_PORT_READY 0x10
68#define AD_PORT_READY_N 0x20
69#define AD_PORT_MATCHED 0x40
70#define AD_PORT_STANDBY 0x80
71#define AD_PORT_SELECTED 0x100
72#define AD_PORT_MOVED 0x200
73
74// Port Key definitions
75// key is determined according to the link speed, duplex and
76// user key(which is yet not supported)
77// ------------------------------------------------------------
78// Port key : | User key | Speed |Duplex|
79// ------------------------------------------------------------
80// 16 6 1 0
81#define AD_DUPLEX_KEY_BITS 0x1
82#define AD_SPEED_KEY_BITS 0x3E
83#define AD_USER_KEY_BITS 0xFFC0
84
85//dalloun
86#define AD_LINK_SPEED_BITMASK_1MBPS 0x1
87#define AD_LINK_SPEED_BITMASK_10MBPS 0x2
88#define AD_LINK_SPEED_BITMASK_100MBPS 0x4
89#define AD_LINK_SPEED_BITMASK_1000MBPS 0x8
90#define AD_LINK_SPEED_BITMASK_10000MBPS 0x10
91//endalloun
92
93// compare MAC addresses
94#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
95
96static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } };
97static u16 ad_ticks_per_sec;
98static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
99
100static const u8 lacpdu_mcast_addr[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
101
102// ================= main 802.3ad protocol functions ==================
103static int ad_lacpdu_send(struct port *port);
104static int ad_marker_send(struct port *port, struct bond_marker *marker);
105static void ad_mux_machine(struct port *port);
106static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port);
107static void ad_tx_machine(struct port *port);
108static void ad_periodic_machine(struct port *port);
109static void ad_port_selection_logic(struct port *port);
110static void ad_agg_selection_logic(struct aggregator *aggregator);
111static void ad_clear_agg(struct aggregator *aggregator);
112static void ad_initialize_agg(struct aggregator *aggregator);
113static void ad_initialize_port(struct port *port, int lacp_fast);
114static void ad_enable_collecting_distributing(struct port *port);
115static void ad_disable_collecting_distributing(struct port *port);
116static void ad_marker_info_received(struct bond_marker *marker_info, struct port *port);
117static void ad_marker_response_received(struct bond_marker *marker, struct port *port);
118
119
120/////////////////////////////////////////////////////////////////////////////////
121// ================= api to bonding and kernel code ==================
122/////////////////////////////////////////////////////////////////////////////////
123
124/**
125 * __get_bond_by_port - get the port's bonding struct
126 * @port: the port we're looking at
127 *
128 * Return @port's bonding struct, or %NULL if it can't be found.
129 */
130static inline struct bonding *__get_bond_by_port(struct port *port)
131{
132 if (port->slave == NULL)
133 return NULL;
134
135 return bond_get_bond_by_slave(port->slave);
136}
137
138/**
139 * __get_first_port - get the first port in the bond
140 * @bond: the bond we're looking at
141 *
142 * Return the port of the first slave in @bond, or %NULL if it can't be found.
143 */
144static inline struct port *__get_first_port(struct bonding *bond)
145{
146 if (bond->slave_cnt == 0)
147 return NULL;
148
149 return &(SLAVE_AD_INFO(bond->first_slave).port);
150}
151
152/**
153 * __get_next_port - get the next port in the bond
154 * @port: the port we're looking at
155 *
156 * Return the port of the slave that is next in line of @port's slave in the
157 * bond, or %NULL if it can't be found.
158 */
159static inline struct port *__get_next_port(struct port *port)
160{
161 struct bonding *bond = __get_bond_by_port(port);
162 struct slave *slave = port->slave;
163
164 // If there's no bond for this port, or this is the last slave
165 if ((bond == NULL) || (slave->next == bond->first_slave))
166 return NULL;
167
168 return &(SLAVE_AD_INFO(slave->next).port);
169}
170
171/**
172 * __get_first_agg - get the first aggregator in the bond
173 * @bond: the bond we're looking at
174 *
175 * Return the aggregator of the first slave in @bond, or %NULL if it can't be
176 * found.
177 */
178static inline struct aggregator *__get_first_agg(struct port *port)
179{
180 struct bonding *bond = __get_bond_by_port(port);
181
182 // If there's no bond for this port, or bond has no slaves
183 if ((bond == NULL) || (bond->slave_cnt == 0))
184 return NULL;
185
186 return &(SLAVE_AD_INFO(bond->first_slave).aggregator);
187}
188
189/**
190 * __get_next_agg - get the next aggregator in the bond
191 * @aggregator: the aggregator we're looking at
192 *
193 * Return the aggregator of the slave that is next in line of @aggregator's
194 * slave in the bond, or %NULL if it can't be found.
195 */
196static inline struct aggregator *__get_next_agg(struct aggregator *aggregator)
197{
198 struct slave *slave = aggregator->slave;
199 struct bonding *bond = bond_get_bond_by_slave(slave);
200
201 // If there's no bond for this aggregator, or this is the last slave
202 if ((bond == NULL) || (slave->next == bond->first_slave))
203 return NULL;
204
205 return &(SLAVE_AD_INFO(slave->next).aggregator);
206}
207
208/*
209 * __agg_has_partner
210 *
211 * Return nonzero if aggregator has a partner (denoted by a non-zero ether
212 * address for the partner). Return 0 if not.
213 */
214static inline int __agg_has_partner(struct aggregator *agg)
215{
216 return !is_zero_ether_addr(agg->partner_system.mac_addr_value);
217}
218
219/**
220 * __disable_port - disable the port's slave
221 * @port: the port we're looking at
222 *
223 */
224static inline void __disable_port(struct port *port)
225{
226 bond_set_slave_inactive_flags(port->slave);
227}
228
229/**
230 * __enable_port - enable the port's slave, if it's up
231 * @port: the port we're looking at
232 *
233 */
234static inline void __enable_port(struct port *port)
235{
236 struct slave *slave = port->slave;
237
238 if ((slave->link == BOND_LINK_UP) && IS_UP(slave->dev))
239 bond_set_slave_active_flags(slave);
240}
241
242/**
243 * __port_is_enabled - check if the port's slave is in active state
244 * @port: the port we're looking at
245 *
246 */
247static inline int __port_is_enabled(struct port *port)
248{
249 return bond_is_active_slave(port->slave);
250}
251
252/**
253 * __get_agg_selection_mode - get the aggregator selection mode
254 * @port: the port we're looking at
255 *
256 * Get the aggregator selection mode. Can be %STABLE, %BANDWIDTH or %COUNT.
257 */
258static inline u32 __get_agg_selection_mode(struct port *port)
259{
260 struct bonding *bond = __get_bond_by_port(port);
261
262 if (bond == NULL)
263 return BOND_AD_STABLE;
264
265 return bond->params.ad_select;
266}
267
268/**
269 * __check_agg_selection_timer - check if the selection timer has expired
270 * @port: the port we're looking at
271 *
272 */
273static inline int __check_agg_selection_timer(struct port *port)
274{
275 struct bonding *bond = __get_bond_by_port(port);
276
277 if (bond == NULL)
278 return 0;
279
280 return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0;
281}
282
283/**
284 * __get_state_machine_lock - lock the port's state machines
285 * @port: the port we're looking at
286 *
287 */
288static inline void __get_state_machine_lock(struct port *port)
289{
290 spin_lock_bh(&(SLAVE_AD_INFO(port->slave).state_machine_lock));
291}
292
293/**
294 * __release_state_machine_lock - unlock the port's state machines
295 * @port: the port we're looking at
296 *
297 */
298static inline void __release_state_machine_lock(struct port *port)
299{
300 spin_unlock_bh(&(SLAVE_AD_INFO(port->slave).state_machine_lock));
301}
302
303/**
304 * __get_link_speed - get a port's speed
305 * @port: the port we're looking at
306 *
307 * Return @port's speed in 802.3ad bitmask format. i.e. one of:
308 * 0,
309 * %AD_LINK_SPEED_BITMASK_10MBPS,
310 * %AD_LINK_SPEED_BITMASK_100MBPS,
311 * %AD_LINK_SPEED_BITMASK_1000MBPS,
312 * %AD_LINK_SPEED_BITMASK_10000MBPS
313 */
314static u16 __get_link_speed(struct port *port)
315{
316 struct slave *slave = port->slave;
317 u16 speed;
318
319 /* this if covers only a special case: when the configuration starts with
320 * link down, it sets the speed to 0.
321 * This is done in spite of the fact that the e100 driver reports 0 to be
322 * compatible with MVT in the future.*/
323 if (slave->link != BOND_LINK_UP)
324 speed = 0;
325 else {
326 switch (slave->speed) {
327 case SPEED_10:
328 speed = AD_LINK_SPEED_BITMASK_10MBPS;
329 break;
330
331 case SPEED_100:
332 speed = AD_LINK_SPEED_BITMASK_100MBPS;
333 break;
334
335 case SPEED_1000:
336 speed = AD_LINK_SPEED_BITMASK_1000MBPS;
337 break;
338
339 case SPEED_10000:
340 speed = AD_LINK_SPEED_BITMASK_10000MBPS;
341 break;
342
343 default:
344 speed = 0; // unknown speed value from ethtool. shouldn't happen
345 break;
346 }
347 }
348
349 pr_debug("Port %d Received link speed %d update from adapter\n",
350 port->actor_port_number, speed);
351 return speed;
352}
353
354/**
355 * __get_duplex - get a port's duplex
356 * @port: the port we're looking at
357 *
358 * Return @port's duplex in 802.3ad bitmask format. i.e.:
359 * 0x01 if in full duplex
360 * 0x00 otherwise
361 */
362static u8 __get_duplex(struct port *port)
363{
364 struct slave *slave = port->slave;
365
366 u8 retval;
367
368 // handling a special case: when the configuration starts with
369 // link down, it sets the duplex to 0.
370 if (slave->link != BOND_LINK_UP)
371 retval = 0x0;
372 else {
373 switch (slave->duplex) {
374 case DUPLEX_FULL:
375 retval = 0x1;
376 pr_debug("Port %d Received status full duplex update from adapter\n",
377 port->actor_port_number);
378 break;
379 case DUPLEX_HALF:
380 default:
381 retval = 0x0;
382 pr_debug("Port %d Received status NOT full duplex update from adapter\n",
383 port->actor_port_number);
384 break;
385 }
386 }
387 return retval;
388}
389
390/**
391 * __initialize_port_locks - initialize a port's STATE machine spinlock
392 * @port: the port we're looking at
393 *
394 */
395static inline void __initialize_port_locks(struct port *port)
396{
397 // make sure it isn't called twice
398 spin_lock_init(&(SLAVE_AD_INFO(port->slave).state_machine_lock));
399}
400
401//conversions
402
403/**
404 * __ad_timer_to_ticks - convert a given timer type to AD module ticks
405 * @timer_type: which timer to operate
406 * @par: timer parameter. see below
407 *
408 * If @timer_type is %current_while_timer, @par indicates long/short timer.
409 * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME,
410 * %SLOW_PERIODIC_TIME.
411 */
412static u16 __ad_timer_to_ticks(u16 timer_type, u16 par)
413{
414 u16 retval = 0; /* to silence the compiler */
415
416 switch (timer_type) {
417 case AD_CURRENT_WHILE_TIMER: // for rx machine usage
418 if (par)
419 retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); // short timeout
420 else
421 retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); // long timeout
422 break;
423 case AD_ACTOR_CHURN_TIMER: // for local churn machine
424 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
425 break;
426 case AD_PERIODIC_TIMER: // for periodic machine
427 retval = (par*ad_ticks_per_sec); // long timeout
428 break;
429 case AD_PARTNER_CHURN_TIMER: // for remote churn machine
430 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
431 break;
432 case AD_WAIT_WHILE_TIMER: // for selection machine
433 retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec);
434 break;
435 }
436 return retval;
437}
438
439
440/////////////////////////////////////////////////////////////////////////////////
441// ================= ad_rx_machine helper functions ==================
442/////////////////////////////////////////////////////////////////////////////////
443
444/**
445 * __choose_matched - update a port's matched variable from a received lacpdu
446 * @lacpdu: the lacpdu we've received
447 * @port: the port we're looking at
448 *
449 * Update the value of the matched variable, using parameter values from a
450 * newly received lacpdu. Parameter values for the partner carried in the
451 * received PDU are compared with the corresponding operational parameter
452 * values for the actor. Matched is set to TRUE if all of these parameters
453 * match and the PDU parameter partner_state.aggregation has the same value as
454 * actor_oper_port_state.aggregation and lacp will actively maintain the link
455 * in the aggregation. Matched is also set to TRUE if the value of
456 * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates
457 * an individual link and lacp will actively maintain the link. Otherwise,
458 * matched is set to FALSE. LACP is considered to be actively maintaining the
459 * link if either the PDU's actor_state.lacp_activity variable is TRUE or both
460 * the actor's actor_oper_port_state.lacp_activity and the PDU's
461 * partner_state.lacp_activity variables are TRUE.
462 *
463 * Note: the AD_PORT_MATCHED "variable" is not specified by 802.3ad; it is
464 * used here to implement the language from 802.3ad 43.4.9 that requires
465 * recordPDU to "match" the LACPDU parameters to the stored values.
466 */
467static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
468{
469 // check if all parameters are alike
470 if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
471 (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
472 !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
473 (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
474 (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
475 ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
476 // or this is individual link(aggregation == FALSE)
477 ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0)
478 ) {
479 // update the state machine Matched variable
480 port->sm_vars |= AD_PORT_MATCHED;
481 } else {
482 port->sm_vars &= ~AD_PORT_MATCHED;
483 }
484}
485
486/**
487 * __record_pdu - record parameters from a received lacpdu
488 * @lacpdu: the lacpdu we've received
489 * @port: the port we're looking at
490 *
491 * Record the parameter values for the Actor carried in a received lacpdu as
492 * the current partner operational parameter values and sets
493 * actor_oper_port_state.defaulted to FALSE.
494 */
495static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
496{
497 if (lacpdu && port) {
498 struct port_params *partner = &port->partner_oper;
499
500 __choose_matched(lacpdu, port);
501 // record the new parameter values for the partner operational
502 partner->port_number = ntohs(lacpdu->actor_port);
503 partner->port_priority = ntohs(lacpdu->actor_port_priority);
504 partner->system = lacpdu->actor_system;
505 partner->system_priority = ntohs(lacpdu->actor_system_priority);
506 partner->key = ntohs(lacpdu->actor_key);
507 partner->port_state = lacpdu->actor_state;
508
509 // set actor_oper_port_state.defaulted to FALSE
510 port->actor_oper_port_state &= ~AD_STATE_DEFAULTED;
511
512 // set the partner sync. to on if the partner is sync. and the port is matched
513 if ((port->sm_vars & AD_PORT_MATCHED)
514 && (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION))
515 partner->port_state |= AD_STATE_SYNCHRONIZATION;
516 else
517 partner->port_state &= ~AD_STATE_SYNCHRONIZATION;
518 }
519}
520
521/**
522 * __record_default - record default parameters
523 * @port: the port we're looking at
524 *
525 * This function records the default parameter values for the partner carried
526 * in the Partner Admin parameters as the current partner operational parameter
527 * values and sets actor_oper_port_state.defaulted to TRUE.
528 */
529static void __record_default(struct port *port)
530{
531 if (port) {
532 // record the partner admin parameters
533 memcpy(&port->partner_oper, &port->partner_admin,
534 sizeof(struct port_params));
535
536 // set actor_oper_port_state.defaulted to true
537 port->actor_oper_port_state |= AD_STATE_DEFAULTED;
538 }
539}
540
541/**
542 * __update_selected - update a port's Selected variable from a received lacpdu
543 * @lacpdu: the lacpdu we've received
544 * @port: the port we're looking at
545 *
546 * Update the value of the selected variable, using parameter values from a
547 * newly received lacpdu. The parameter values for the Actor carried in the
548 * received PDU are compared with the corresponding operational parameter
549 * values for the ports partner. If one or more of the comparisons shows that
550 * the value(s) received in the PDU differ from the current operational values,
551 * then selected is set to FALSE and actor_oper_port_state.synchronization is
552 * set to out_of_sync. Otherwise, selected remains unchanged.
553 */
554static void __update_selected(struct lacpdu *lacpdu, struct port *port)
555{
556 if (lacpdu && port) {
557 const struct port_params *partner = &port->partner_oper;
558
559 // check if any parameter is different
560 if (ntohs(lacpdu->actor_port) != partner->port_number ||
561 ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
562 MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system) ||
563 ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
564 ntohs(lacpdu->actor_key) != partner->key ||
565 (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
566 // update the state machine Selected variable
567 port->sm_vars &= ~AD_PORT_SELECTED;
568 }
569 }
570}
571
572/**
573 * __update_default_selected - update a port's Selected variable from Partner
574 * @port: the port we're looking at
575 *
576 * This function updates the value of the selected variable, using the partner
577 * administrative parameter values. The administrative values are compared with
578 * the corresponding operational parameter values for the partner. If one or
579 * more of the comparisons shows that the administrative value(s) differ from
580 * the current operational values, then Selected is set to FALSE and
581 * actor_oper_port_state.synchronization is set to OUT_OF_SYNC. Otherwise,
582 * Selected remains unchanged.
583 */
584static void __update_default_selected(struct port *port)
585{
586 if (port) {
587 const struct port_params *admin = &port->partner_admin;
588 const struct port_params *oper = &port->partner_oper;
589
590 // check if any parameter is different
591 if (admin->port_number != oper->port_number ||
592 admin->port_priority != oper->port_priority ||
593 MAC_ADDRESS_COMPARE(&admin->system, &oper->system) ||
594 admin->system_priority != oper->system_priority ||
595 admin->key != oper->key ||
596 (admin->port_state & AD_STATE_AGGREGATION)
597 != (oper->port_state & AD_STATE_AGGREGATION)) {
598 // update the state machine Selected variable
599 port->sm_vars &= ~AD_PORT_SELECTED;
600 }
601 }
602}
603
604/**
605 * __update_ntt - update a port's ntt variable from a received lacpdu
606 * @lacpdu: the lacpdu we've received
607 * @port: the port we're looking at
608 *
609 * Updates the value of the ntt variable, using parameter values from a newly
610 * received lacpdu. The parameter values for the partner carried in the
611 * received PDU are compared with the corresponding operational parameter
612 * values for the Actor. If one or more of the comparisons shows that the
613 * value(s) received in the PDU differ from the current operational values,
614 * then ntt is set to TRUE. Otherwise, ntt remains unchanged.
615 */
616static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
617{
618 // validate lacpdu and port
619 if (lacpdu && port) {
620 // check if any parameter is different
621 if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
622 (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
623 MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) ||
624 (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
625 (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
626 ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
627 ((lacpdu->partner_state & AD_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)) ||
628 ((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) ||
629 ((lacpdu->partner_state & AD_STATE_AGGREGATION) != (port->actor_oper_port_state & AD_STATE_AGGREGATION))
630 ) {
631
632 port->ntt = true;
633 }
634 }
635}
636
637/**
638 * __attach_bond_to_agg
639 * @port: the port we're looking at
640 *
641 * Handle the attaching of the port's control parser/multiplexer and the
642 * aggregator. This function does nothing since the parser/multiplexer of the
643 * receive and the parser/multiplexer of the aggregator are already combined.
644 */
645static void __attach_bond_to_agg(struct port *port)
646{
647 port = NULL; /* just to satisfy the compiler */
648 // This function does nothing since the parser/multiplexer of the receive
649 // and the parser/multiplexer of the aggregator are already combined
650}
651
652/**
653 * __detach_bond_from_agg
654 * @port: the port we're looking at
655 *
656 * Handle the detaching of the port's control parser/multiplexer from the
657 * aggregator. This function does nothing since the parser/multiplexer of the
658 * receive and the parser/multiplexer of the aggregator are already combined.
659 */
660static void __detach_bond_from_agg(struct port *port)
661{
662 port = NULL; /* just to satisfy the compiler */
663 // This function does nothing sience the parser/multiplexer of the receive
664 // and the parser/multiplexer of the aggregator are already combined
665}
666
667/**
668 * __agg_ports_are_ready - check if all ports in an aggregator are ready
669 * @aggregator: the aggregator we're looking at
670 *
671 */
672static int __agg_ports_are_ready(struct aggregator *aggregator)
673{
674 struct port *port;
675 int retval = 1;
676
677 if (aggregator) {
678 // scan all ports in this aggregator to verfy if they are all ready
679 for (port = aggregator->lag_ports;
680 port;
681 port = port->next_port_in_aggregator) {
682 if (!(port->sm_vars & AD_PORT_READY_N)) {
683 retval = 0;
684 break;
685 }
686 }
687 }
688
689 return retval;
690}
691
692/**
693 * __set_agg_ports_ready - set value of Ready bit in all ports of an aggregator
694 * @aggregator: the aggregator we're looking at
695 * @val: Should the ports' ready bit be set on or off
696 *
697 */
698static void __set_agg_ports_ready(struct aggregator *aggregator, int val)
699{
700 struct port *port;
701
702 for (port = aggregator->lag_ports; port;
703 port = port->next_port_in_aggregator) {
704 if (val)
705 port->sm_vars |= AD_PORT_READY;
706 else
707 port->sm_vars &= ~AD_PORT_READY;
708 }
709}
710
711/**
712 * __get_agg_bandwidth - get the total bandwidth of an aggregator
713 * @aggregator: the aggregator we're looking at
714 *
715 */
716static u32 __get_agg_bandwidth(struct aggregator *aggregator)
717{
718 u32 bandwidth = 0;
719
720 if (aggregator->num_of_ports) {
721 switch (__get_link_speed(aggregator->lag_ports)) {
722 case AD_LINK_SPEED_BITMASK_1MBPS:
723 bandwidth = aggregator->num_of_ports;
724 break;
725 case AD_LINK_SPEED_BITMASK_10MBPS:
726 bandwidth = aggregator->num_of_ports * 10;
727 break;
728 case AD_LINK_SPEED_BITMASK_100MBPS:
729 bandwidth = aggregator->num_of_ports * 100;
730 break;
731 case AD_LINK_SPEED_BITMASK_1000MBPS:
732 bandwidth = aggregator->num_of_ports * 1000;
733 break;
734 case AD_LINK_SPEED_BITMASK_10000MBPS:
735 bandwidth = aggregator->num_of_ports * 10000;
736 break;
737 default:
738 bandwidth = 0; /*to silence the compiler ....*/
739 }
740 }
741 return bandwidth;
742}
743
744/**
745 * __get_active_agg - get the current active aggregator
746 * @aggregator: the aggregator we're looking at
747 *
748 */
749static struct aggregator *__get_active_agg(struct aggregator *aggregator)
750{
751 struct aggregator *retval = NULL;
752
753 for (; aggregator; aggregator = __get_next_agg(aggregator)) {
754 if (aggregator->is_active) {
755 retval = aggregator;
756 break;
757 }
758 }
759
760 return retval;
761}
762
763/**
764 * __update_lacpdu_from_port - update a port's lacpdu fields
765 * @port: the port we're looking at
766 *
767 */
768static inline void __update_lacpdu_from_port(struct port *port)
769{
770 struct lacpdu *lacpdu = &port->lacpdu;
771 const struct port_params *partner = &port->partner_oper;
772
773 /* update current actual Actor parameters */
774 /* lacpdu->subtype initialized
775 * lacpdu->version_number initialized
776 * lacpdu->tlv_type_actor_info initialized
777 * lacpdu->actor_information_length initialized
778 */
779
780 lacpdu->actor_system_priority = htons(port->actor_system_priority);
781 lacpdu->actor_system = port->actor_system;
782 lacpdu->actor_key = htons(port->actor_oper_port_key);
783 lacpdu->actor_port_priority = htons(port->actor_port_priority);
784 lacpdu->actor_port = htons(port->actor_port_number);
785 lacpdu->actor_state = port->actor_oper_port_state;
786
787 /* lacpdu->reserved_3_1 initialized
788 * lacpdu->tlv_type_partner_info initialized
789 * lacpdu->partner_information_length initialized
790 */
791
792 lacpdu->partner_system_priority = htons(partner->system_priority);
793 lacpdu->partner_system = partner->system;
794 lacpdu->partner_key = htons(partner->key);
795 lacpdu->partner_port_priority = htons(partner->port_priority);
796 lacpdu->partner_port = htons(partner->port_number);
797 lacpdu->partner_state = partner->port_state;
798
799 /* lacpdu->reserved_3_2 initialized
800 * lacpdu->tlv_type_collector_info initialized
801 * lacpdu->collector_information_length initialized
802 * collector_max_delay initialized
803 * reserved_12[12] initialized
804 * tlv_type_terminator initialized
805 * terminator_length initialized
806 * reserved_50[50] initialized
807 */
808}
809
810//////////////////////////////////////////////////////////////////////////////////////
811// ================= main 802.3ad protocol code ======================================
812//////////////////////////////////////////////////////////////////////////////////////
813
814/**
815 * ad_lacpdu_send - send out a lacpdu packet on a given port
816 * @port: the port we're looking at
817 *
818 * Returns: 0 on success
819 * < 0 on error
820 */
821static int ad_lacpdu_send(struct port *port)
822{
823 struct slave *slave = port->slave;
824 struct sk_buff *skb;
825 struct lacpdu_header *lacpdu_header;
826 int length = sizeof(struct lacpdu_header);
827
828 skb = dev_alloc_skb(length);
829 if (!skb)
830 return -ENOMEM;
831
832 skb->dev = slave->dev;
833 skb_reset_mac_header(skb);
834 skb->network_header = skb->mac_header + ETH_HLEN;
835 skb->protocol = PKT_TYPE_LACPDU;
836 skb->priority = TC_PRIO_CONTROL;
837
838 lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
839
840 memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
841 /* Note: source address is set to be the member's PERMANENT address,
842 because we use it to identify loopback lacpdus in receive. */
843 memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
844 lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
845
846 lacpdu_header->lacpdu = port->lacpdu; // struct copy
847
848 dev_queue_xmit(skb);
849
850 return 0;
851}
852
853/**
854 * ad_marker_send - send marker information/response on a given port
855 * @port: the port we're looking at
856 * @marker: marker data to send
857 *
858 * Returns: 0 on success
859 * < 0 on error
860 */
861static int ad_marker_send(struct port *port, struct bond_marker *marker)
862{
863 struct slave *slave = port->slave;
864 struct sk_buff *skb;
865 struct bond_marker_header *marker_header;
866 int length = sizeof(struct bond_marker_header);
867
868 skb = dev_alloc_skb(length + 16);
869 if (!skb)
870 return -ENOMEM;
871
872 skb_reserve(skb, 16);
873
874 skb->dev = slave->dev;
875 skb_reset_mac_header(skb);
876 skb->network_header = skb->mac_header + ETH_HLEN;
877 skb->protocol = PKT_TYPE_LACPDU;
878
879 marker_header = (struct bond_marker_header *)skb_put(skb, length);
880
881 memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
882 /* Note: source address is set to be the member's PERMANENT address,
883 because we use it to identify loopback MARKERs in receive. */
884 memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
885 marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
886
887 marker_header->marker = *marker; // struct copy
888
889 dev_queue_xmit(skb);
890
891 return 0;
892}
893
894/**
895 * ad_mux_machine - handle a port's mux state machine
896 * @port: the port we're looking at
897 *
898 */
899static void ad_mux_machine(struct port *port)
900{
901 mux_states_t last_state;
902
903 // keep current State Machine state to compare later if it was changed
904 last_state = port->sm_mux_state;
905
906 if (port->sm_vars & AD_PORT_BEGIN) {
907 port->sm_mux_state = AD_MUX_DETACHED; // next state
908 } else {
909 switch (port->sm_mux_state) {
910 case AD_MUX_DETACHED:
911 if ((port->sm_vars & AD_PORT_SELECTED)
912 || (port->sm_vars & AD_PORT_STANDBY))
913 /* if SELECTED or STANDBY */
914 port->sm_mux_state = AD_MUX_WAITING; // next state
915 break;
916 case AD_MUX_WAITING:
917 // if SELECTED == FALSE return to DETACH state
918 if (!(port->sm_vars & AD_PORT_SELECTED)) { // if UNSELECTED
919 port->sm_vars &= ~AD_PORT_READY_N;
920 // in order to withhold the Selection Logic to check all ports READY_N value
921 // every callback cycle to update ready variable, we check READY_N and update READY here
922 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
923 port->sm_mux_state = AD_MUX_DETACHED; // next state
924 break;
925 }
926
927 // check if the wait_while_timer expired
928 if (port->sm_mux_timer_counter
929 && !(--port->sm_mux_timer_counter))
930 port->sm_vars |= AD_PORT_READY_N;
931
932 // in order to withhold the selection logic to check all ports READY_N value
933 // every callback cycle to update ready variable, we check READY_N and update READY here
934 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
935
936 // if the wait_while_timer expired, and the port is in READY state, move to ATTACHED state
937 if ((port->sm_vars & AD_PORT_READY)
938 && !port->sm_mux_timer_counter)
939 port->sm_mux_state = AD_MUX_ATTACHED; // next state
940 break;
941 case AD_MUX_ATTACHED:
942 // check also if agg_select_timer expired(so the edable port will take place only after this timer)
943 if ((port->sm_vars & AD_PORT_SELECTED) && (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) && !__check_agg_selection_timer(port)) {
944 port->sm_mux_state = AD_MUX_COLLECTING_DISTRIBUTING;// next state
945 } else if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY)) { // if UNSELECTED or STANDBY
946 port->sm_vars &= ~AD_PORT_READY_N;
947 // in order to withhold the selection logic to check all ports READY_N value
948 // every callback cycle to update ready variable, we check READY_N and update READY here
949 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
950 port->sm_mux_state = AD_MUX_DETACHED;// next state
951 }
952 break;
953 case AD_MUX_COLLECTING_DISTRIBUTING:
954 if (!(port->sm_vars & AD_PORT_SELECTED) || (port->sm_vars & AD_PORT_STANDBY) ||
955 !(port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION)
956 ) {
957 port->sm_mux_state = AD_MUX_ATTACHED;// next state
958
959 } else {
960 // if port state hasn't changed make
961 // sure that a collecting distributing
962 // port in an active aggregator is enabled
963 if (port->aggregator &&
964 port->aggregator->is_active &&
965 !__port_is_enabled(port)) {
966
967 __enable_port(port);
968 }
969 }
970 break;
971 default: //to silence the compiler
972 break;
973 }
974 }
975
976 // check if the state machine was changed
977 if (port->sm_mux_state != last_state) {
978 pr_debug("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n",
979 port->actor_port_number, last_state,
980 port->sm_mux_state);
981 switch (port->sm_mux_state) {
982 case AD_MUX_DETACHED:
983 __detach_bond_from_agg(port);
984 port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
985 ad_disable_collecting_distributing(port);
986 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
987 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
988 port->ntt = true;
989 break;
990 case AD_MUX_WAITING:
991 port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0);
992 break;
993 case AD_MUX_ATTACHED:
994 __attach_bond_to_agg(port);
995 port->actor_oper_port_state |= AD_STATE_SYNCHRONIZATION;
996 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
997 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
998 ad_disable_collecting_distributing(port);
999 port->ntt = true;
1000 break;
1001 case AD_MUX_COLLECTING_DISTRIBUTING:
1002 port->actor_oper_port_state |= AD_STATE_COLLECTING;
1003 port->actor_oper_port_state |= AD_STATE_DISTRIBUTING;
1004 ad_enable_collecting_distributing(port);
1005 port->ntt = true;
1006 break;
1007 default: //to silence the compiler
1008 break;
1009 }
1010 }
1011}
1012
1013/**
1014 * ad_rx_machine - handle a port's rx State Machine
1015 * @lacpdu: the lacpdu we've received
1016 * @port: the port we're looking at
1017 *
1018 * If lacpdu arrived, stop previous timer (if exists) and set the next state as
1019 * CURRENT. If timer expired set the state machine in the proper state.
1020 * In other cases, this function checks if we need to switch to other state.
1021 */
1022static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
1023{
1024 rx_states_t last_state;
1025
1026 // keep current State Machine state to compare later if it was changed
1027 last_state = port->sm_rx_state;
1028
1029 // check if state machine should change state
1030 // first, check if port was reinitialized
1031 if (port->sm_vars & AD_PORT_BEGIN)
1032 /* next state */
1033 port->sm_rx_state = AD_RX_INITIALIZE;
1034 // check if port is not enabled
1035 else if (!(port->sm_vars & AD_PORT_BEGIN)
1036 && !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED))
1037 /* next state */
1038 port->sm_rx_state = AD_RX_PORT_DISABLED;
1039 // check if new lacpdu arrived
1040 else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || (port->sm_rx_state == AD_RX_DEFAULTED) || (port->sm_rx_state == AD_RX_CURRENT))) {
1041 port->sm_rx_timer_counter = 0; // zero timer
1042 port->sm_rx_state = AD_RX_CURRENT;
1043 } else {
1044 // if timer is on, and if it is expired
1045 if (port->sm_rx_timer_counter && !(--port->sm_rx_timer_counter)) {
1046 switch (port->sm_rx_state) {
1047 case AD_RX_EXPIRED:
1048 port->sm_rx_state = AD_RX_DEFAULTED; // next state
1049 break;
1050 case AD_RX_CURRENT:
1051 port->sm_rx_state = AD_RX_EXPIRED; // next state
1052 break;
1053 default: //to silence the compiler
1054 break;
1055 }
1056 } else {
1057 // if no lacpdu arrived and no timer is on
1058 switch (port->sm_rx_state) {
1059 case AD_RX_PORT_DISABLED:
1060 if (port->sm_vars & AD_PORT_MOVED)
1061 port->sm_rx_state = AD_RX_INITIALIZE; // next state
1062 else if (port->is_enabled
1063 && (port->sm_vars
1064 & AD_PORT_LACP_ENABLED))
1065 port->sm_rx_state = AD_RX_EXPIRED; // next state
1066 else if (port->is_enabled
1067 && ((port->sm_vars
1068 & AD_PORT_LACP_ENABLED) == 0))
1069 port->sm_rx_state = AD_RX_LACP_DISABLED; // next state
1070 break;
1071 default: //to silence the compiler
1072 break;
1073
1074 }
1075 }
1076 }
1077
1078 // check if the State machine was changed or new lacpdu arrived
1079 if ((port->sm_rx_state != last_state) || (lacpdu)) {
1080 pr_debug("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n",
1081 port->actor_port_number, last_state,
1082 port->sm_rx_state);
1083 switch (port->sm_rx_state) {
1084 case AD_RX_INITIALIZE:
1085 if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS))
1086 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
1087 else
1088 port->sm_vars |= AD_PORT_LACP_ENABLED;
1089 port->sm_vars &= ~AD_PORT_SELECTED;
1090 __record_default(port);
1091 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1092 port->sm_vars &= ~AD_PORT_MOVED;
1093 port->sm_rx_state = AD_RX_PORT_DISABLED; // next state
1094
1095 /*- Fall Through -*/
1096
1097 case AD_RX_PORT_DISABLED:
1098 port->sm_vars &= ~AD_PORT_MATCHED;
1099 break;
1100 case AD_RX_LACP_DISABLED:
1101 port->sm_vars &= ~AD_PORT_SELECTED;
1102 __record_default(port);
1103 port->partner_oper.port_state &= ~AD_STATE_AGGREGATION;
1104 port->sm_vars |= AD_PORT_MATCHED;
1105 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1106 break;
1107 case AD_RX_EXPIRED:
1108 //Reset of the Synchronization flag. (Standard 43.4.12)
1109 //This reset cause to disable this port in the COLLECTING_DISTRIBUTING state of the
1110 //mux machine in case of EXPIRED even if LINK_DOWN didn't arrive for the port.
1111 port->partner_oper.port_state &= ~AD_STATE_SYNCHRONIZATION;
1112 port->sm_vars &= ~AD_PORT_MATCHED;
1113 port->partner_oper.port_state |=
1114 AD_STATE_LACP_ACTIVITY;
1115 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT));
1116 port->actor_oper_port_state |= AD_STATE_EXPIRED;
1117 break;
1118 case AD_RX_DEFAULTED:
1119 __update_default_selected(port);
1120 __record_default(port);
1121 port->sm_vars |= AD_PORT_MATCHED;
1122 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1123 break;
1124 case AD_RX_CURRENT:
1125 // detect loopback situation
1126 if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
1127 // INFO_RECEIVED_LOOPBACK_FRAMES
1128 pr_err("%s: An illegal loopback occurred on adapter (%s).\n"
1129 "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
1130 port->slave->dev->master->name, port->slave->dev->name);
1131 return;
1132 }
1133 __update_selected(lacpdu, port);
1134 __update_ntt(lacpdu, port);
1135 __record_pdu(lacpdu, port);
1136 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT));
1137 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1138 // verify that if the aggregator is enabled, the port is enabled too.
1139 //(because if the link goes down for a short time, the 802.3ad will not
1140 // catch it, and the port will continue to be disabled)
1141 if (port->aggregator
1142 && port->aggregator->is_active
1143 && !__port_is_enabled(port))
1144 __enable_port(port);
1145 break;
1146 default: //to silence the compiler
1147 break;
1148 }
1149 }
1150}
1151
1152/**
1153 * ad_tx_machine - handle a port's tx state machine
1154 * @port: the port we're looking at
1155 *
1156 */
1157static void ad_tx_machine(struct port *port)
1158{
1159 // check if tx timer expired, to verify that we do not send more than 3 packets per second
1160 if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) {
1161 // check if there is something to send
1162 if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) {
1163 __update_lacpdu_from_port(port);
1164
1165 if (ad_lacpdu_send(port) >= 0) {
1166 pr_debug("Sent LACPDU on port %d\n",
1167 port->actor_port_number);
1168
1169 /* mark ntt as false, so it will not be sent again until
1170 demanded */
1171 port->ntt = false;
1172 }
1173 }
1174 // restart tx timer(to verify that we will not exceed AD_MAX_TX_IN_SECOND
1175 port->sm_tx_timer_counter =
1176 ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
1177 }
1178}
1179
1180/**
1181 * ad_periodic_machine - handle a port's periodic state machine
1182 * @port: the port we're looking at
1183 *
1184 * Turn ntt flag on priodically to perform periodic transmission of lacpdu's.
1185 */
1186static void ad_periodic_machine(struct port *port)
1187{
1188 periodic_states_t last_state;
1189
1190 // keep current state machine state to compare later if it was changed
1191 last_state = port->sm_periodic_state;
1192
1193 // check if port was reinitialized
1194 if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) ||
1195 (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & AD_STATE_LACP_ACTIVITY))
1196 ) {
1197 port->sm_periodic_state = AD_NO_PERIODIC; // next state
1198 }
1199 // check if state machine should change state
1200 else if (port->sm_periodic_timer_counter) {
1201 // check if periodic state machine expired
1202 if (!(--port->sm_periodic_timer_counter)) {
1203 // if expired then do tx
1204 port->sm_periodic_state = AD_PERIODIC_TX; // next state
1205 } else {
1206 // If not expired, check if there is some new timeout parameter from the partner state
1207 switch (port->sm_periodic_state) {
1208 case AD_FAST_PERIODIC:
1209 if (!(port->partner_oper.port_state
1210 & AD_STATE_LACP_TIMEOUT))
1211 port->sm_periodic_state = AD_SLOW_PERIODIC; // next state
1212 break;
1213 case AD_SLOW_PERIODIC:
1214 if ((port->partner_oper.port_state & AD_STATE_LACP_TIMEOUT)) {
1215 // stop current timer
1216 port->sm_periodic_timer_counter = 0;
1217 port->sm_periodic_state = AD_PERIODIC_TX; // next state
1218 }
1219 break;
1220 default: //to silence the compiler
1221 break;
1222 }
1223 }
1224 } else {
1225 switch (port->sm_periodic_state) {
1226 case AD_NO_PERIODIC:
1227 port->sm_periodic_state = AD_FAST_PERIODIC; // next state
1228 break;
1229 case AD_PERIODIC_TX:
1230 if (!(port->partner_oper.port_state
1231 & AD_STATE_LACP_TIMEOUT))
1232 port->sm_periodic_state = AD_SLOW_PERIODIC; // next state
1233 else
1234 port->sm_periodic_state = AD_FAST_PERIODIC; // next state
1235 break;
1236 default: //to silence the compiler
1237 break;
1238 }
1239 }
1240
1241 // check if the state machine was changed
1242 if (port->sm_periodic_state != last_state) {
1243 pr_debug("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n",
1244 port->actor_port_number, last_state,
1245 port->sm_periodic_state);
1246 switch (port->sm_periodic_state) {
1247 case AD_NO_PERIODIC:
1248 port->sm_periodic_timer_counter = 0; // zero timer
1249 break;
1250 case AD_FAST_PERIODIC:
1251 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle
1252 break;
1253 case AD_SLOW_PERIODIC:
1254 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; // decrement 1 tick we lost in the PERIODIC_TX cycle
1255 break;
1256 case AD_PERIODIC_TX:
1257 port->ntt = true;
1258 break;
1259 default: //to silence the compiler
1260 break;
1261 }
1262 }
1263}
1264
1265/**
1266 * ad_port_selection_logic - select aggregation groups
1267 * @port: the port we're looking at
1268 *
1269 * Select aggregation groups, and assign each port for it's aggregetor. The
1270 * selection logic is called in the inititalization (after all the handshkes),
1271 * and after every lacpdu receive (if selected is off).
1272 */
1273static void ad_port_selection_logic(struct port *port)
1274{
1275 struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator;
1276 struct port *last_port = NULL, *curr_port;
1277 int found = 0;
1278
1279 // if the port is already Selected, do nothing
1280 if (port->sm_vars & AD_PORT_SELECTED)
1281 return;
1282
1283 // if the port is connected to other aggregator, detach it
1284 if (port->aggregator) {
1285 // detach the port from its former aggregator
1286 temp_aggregator = port->aggregator;
1287 for (curr_port = temp_aggregator->lag_ports; curr_port;
1288 last_port = curr_port,
1289 curr_port = curr_port->next_port_in_aggregator) {
1290 if (curr_port == port) {
1291 temp_aggregator->num_of_ports--;
1292 if (!last_port) {// if it is the first port attached to the aggregator
1293 temp_aggregator->lag_ports =
1294 port->next_port_in_aggregator;
1295 } else {// not the first port attached to the aggregator
1296 last_port->next_port_in_aggregator =
1297 port->next_port_in_aggregator;
1298 }
1299
1300 // clear the port's relations to this aggregator
1301 port->aggregator = NULL;
1302 port->next_port_in_aggregator = NULL;
1303 port->actor_port_aggregator_identifier = 0;
1304
1305 pr_debug("Port %d left LAG %d\n",
1306 port->actor_port_number,
1307 temp_aggregator->aggregator_identifier);
1308 // if the aggregator is empty, clear its parameters, and set it ready to be attached
1309 if (!temp_aggregator->lag_ports)
1310 ad_clear_agg(temp_aggregator);
1311 break;
1312 }
1313 }
1314 if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
1315 pr_warning("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n",
1316 port->slave->dev->master->name,
1317 port->actor_port_number,
1318 port->slave->dev->name,
1319 port->aggregator->aggregator_identifier);
1320 }
1321 }
1322 // search on all aggregators for a suitable aggregator for this port
1323 for (aggregator = __get_first_agg(port); aggregator;
1324 aggregator = __get_next_agg(aggregator)) {
1325
1326 // keep a free aggregator for later use(if needed)
1327 if (!aggregator->lag_ports) {
1328 if (!free_aggregator)
1329 free_aggregator = aggregator;
1330 continue;
1331 }
1332 // check if current aggregator suits us
1333 if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && // if all parameters match AND
1334 !MAC_ADDRESS_COMPARE(&(aggregator->partner_system), &(port->partner_oper.system)) &&
1335 (aggregator->partner_system_priority == port->partner_oper.system_priority) &&
1336 (aggregator->partner_oper_aggregator_key == port->partner_oper.key)
1337 ) &&
1338 ((MAC_ADDRESS_COMPARE(&(port->partner_oper.system), &(null_mac_addr)) && // partner answers
1339 !aggregator->is_individual) // but is not individual OR
1340 )
1341 ) {
1342 // attach to the founded aggregator
1343 port->aggregator = aggregator;
1344 port->actor_port_aggregator_identifier =
1345 port->aggregator->aggregator_identifier;
1346 port->next_port_in_aggregator = aggregator->lag_ports;
1347 port->aggregator->num_of_ports++;
1348 aggregator->lag_ports = port;
1349 pr_debug("Port %d joined LAG %d(existing LAG)\n",
1350 port->actor_port_number,
1351 port->aggregator->aggregator_identifier);
1352
1353 // mark this port as selected
1354 port->sm_vars |= AD_PORT_SELECTED;
1355 found = 1;
1356 break;
1357 }
1358 }
1359
1360 // the port couldn't find an aggregator - attach it to a new aggregator
1361 if (!found) {
1362 if (free_aggregator) {
1363 // assign port a new aggregator
1364 port->aggregator = free_aggregator;
1365 port->actor_port_aggregator_identifier =
1366 port->aggregator->aggregator_identifier;
1367
1368 // update the new aggregator's parameters
1369 // if port was responsed from the end-user
1370 if (port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)
1371 /* if port is full duplex */
1372 port->aggregator->is_individual = false;
1373 else
1374 port->aggregator->is_individual = true;
1375
1376 port->aggregator->actor_admin_aggregator_key = port->actor_admin_port_key;
1377 port->aggregator->actor_oper_aggregator_key = port->actor_oper_port_key;
1378 port->aggregator->partner_system =
1379 port->partner_oper.system;
1380 port->aggregator->partner_system_priority =
1381 port->partner_oper.system_priority;
1382 port->aggregator->partner_oper_aggregator_key = port->partner_oper.key;
1383 port->aggregator->receive_state = 1;
1384 port->aggregator->transmit_state = 1;
1385 port->aggregator->lag_ports = port;
1386 port->aggregator->num_of_ports++;
1387
1388 // mark this port as selected
1389 port->sm_vars |= AD_PORT_SELECTED;
1390
1391 pr_debug("Port %d joined LAG %d(new LAG)\n",
1392 port->actor_port_number,
1393 port->aggregator->aggregator_identifier);
1394 } else {
1395 pr_err("%s: Port %d (on %s) did not find a suitable aggregator\n",
1396 port->slave->dev->master->name,
1397 port->actor_port_number, port->slave->dev->name);
1398 }
1399 }
1400 // if all aggregator's ports are READY_N == TRUE, set ready=TRUE in all aggregator's ports
1401 // else set ready=FALSE in all aggregator's ports
1402 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
1403
1404 aggregator = __get_first_agg(port);
1405 ad_agg_selection_logic(aggregator);
1406}
1407
1408/*
1409 * Decide if "agg" is a better choice for the new active aggregator that
1410 * the current best, according to the ad_select policy.
1411 */
1412static struct aggregator *ad_agg_selection_test(struct aggregator *best,
1413 struct aggregator *curr)
1414{
1415 /*
1416 * 0. If no best, select current.
1417 *
1418 * 1. If the current agg is not individual, and the best is
1419 * individual, select current.
1420 *
1421 * 2. If current agg is individual and the best is not, keep best.
1422 *
1423 * 3. Therefore, current and best are both individual or both not
1424 * individual, so:
1425 *
1426 * 3a. If current agg partner replied, and best agg partner did not,
1427 * select current.
1428 *
1429 * 3b. If current agg partner did not reply and best agg partner
1430 * did reply, keep best.
1431 *
1432 * 4. Therefore, current and best both have partner replies or
1433 * both do not, so perform selection policy:
1434 *
1435 * BOND_AD_COUNT: Select by count of ports. If count is equal,
1436 * select by bandwidth.
1437 *
1438 * BOND_AD_STABLE, BOND_AD_BANDWIDTH: Select by bandwidth.
1439 */
1440 if (!best)
1441 return curr;
1442
1443 if (!curr->is_individual && best->is_individual)
1444 return curr;
1445
1446 if (curr->is_individual && !best->is_individual)
1447 return best;
1448
1449 if (__agg_has_partner(curr) && !__agg_has_partner(best))
1450 return curr;
1451
1452 if (!__agg_has_partner(curr) && __agg_has_partner(best))
1453 return best;
1454
1455 switch (__get_agg_selection_mode(curr->lag_ports)) {
1456 case BOND_AD_COUNT:
1457 if (curr->num_of_ports > best->num_of_ports)
1458 return curr;
1459
1460 if (curr->num_of_ports < best->num_of_ports)
1461 return best;
1462
1463 /*FALLTHROUGH*/
1464 case BOND_AD_STABLE:
1465 case BOND_AD_BANDWIDTH:
1466 if (__get_agg_bandwidth(curr) > __get_agg_bandwidth(best))
1467 return curr;
1468
1469 break;
1470
1471 default:
1472 pr_warning("%s: Impossible agg select mode %d\n",
1473 curr->slave->dev->master->name,
1474 __get_agg_selection_mode(curr->lag_ports));
1475 break;
1476 }
1477
1478 return best;
1479}
1480
1481static int agg_device_up(const struct aggregator *agg)
1482{
1483 struct port *port = agg->lag_ports;
1484 if (!port)
1485 return 0;
1486 return (netif_running(port->slave->dev) &&
1487 netif_carrier_ok(port->slave->dev));
1488}
1489
1490/**
1491 * ad_agg_selection_logic - select an aggregation group for a team
1492 * @aggregator: the aggregator we're looking at
1493 *
1494 * It is assumed that only one aggregator may be selected for a team.
1495 *
1496 * The logic of this function is to select the aggregator according to
1497 * the ad_select policy:
1498 *
1499 * BOND_AD_STABLE: select the aggregator with the most ports attached to
1500 * it, and to reselect the active aggregator only if the previous
1501 * aggregator has no more ports related to it.
1502 *
1503 * BOND_AD_BANDWIDTH: select the aggregator with the highest total
1504 * bandwidth, and reselect whenever a link state change takes place or the
1505 * set of slaves in the bond changes.
1506 *
1507 * BOND_AD_COUNT: select the aggregator with largest number of ports
1508 * (slaves), and reselect whenever a link state change takes place or the
1509 * set of slaves in the bond changes.
1510 *
1511 * FIXME: this function MUST be called with the first agg in the bond, or
1512 * __get_active_agg() won't work correctly. This function should be better
1513 * called with the bond itself, and retrieve the first agg from it.
1514 */
1515static void ad_agg_selection_logic(struct aggregator *agg)
1516{
1517 struct aggregator *best, *active, *origin;
1518 struct port *port;
1519
1520 origin = agg;
1521 active = __get_active_agg(agg);
1522 best = (active && agg_device_up(active)) ? active : NULL;
1523
1524 do {
1525 agg->is_active = 0;
1526
1527 if (agg->num_of_ports && agg_device_up(agg))
1528 best = ad_agg_selection_test(best, agg);
1529
1530 } while ((agg = __get_next_agg(agg)));
1531
1532 if (best &&
1533 __get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) {
1534 /*
1535 * For the STABLE policy, don't replace the old active
1536 * aggregator if it's still active (it has an answering
1537 * partner) or if both the best and active don't have an
1538 * answering partner.
1539 */
1540 if (active && active->lag_ports &&
1541 active->lag_ports->is_enabled &&
1542 (__agg_has_partner(active) ||
1543 (!__agg_has_partner(active) && !__agg_has_partner(best)))) {
1544 if (!(!active->actor_oper_aggregator_key &&
1545 best->actor_oper_aggregator_key)) {
1546 best = NULL;
1547 active->is_active = 1;
1548 }
1549 }
1550 }
1551
1552 if (best && (best == active)) {
1553 best = NULL;
1554 active->is_active = 1;
1555 }
1556
1557 // if there is new best aggregator, activate it
1558 if (best) {
1559 pr_debug("best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1560 best->aggregator_identifier, best->num_of_ports,
1561 best->actor_oper_aggregator_key,
1562 best->partner_oper_aggregator_key,
1563 best->is_individual, best->is_active);
1564 pr_debug("best ports %p slave %p %s\n",
1565 best->lag_ports, best->slave,
1566 best->slave ? best->slave->dev->name : "NULL");
1567
1568 for (agg = __get_first_agg(best->lag_ports); agg;
1569 agg = __get_next_agg(agg)) {
1570
1571 pr_debug("Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1572 agg->aggregator_identifier, agg->num_of_ports,
1573 agg->actor_oper_aggregator_key,
1574 agg->partner_oper_aggregator_key,
1575 agg->is_individual, agg->is_active);
1576 }
1577
1578 // check if any partner replys
1579 if (best->is_individual) {
1580 pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
1581 best->slave ? best->slave->dev->master->name : "NULL");
1582 }
1583
1584 best->is_active = 1;
1585 pr_debug("LAG %d chosen as the active LAG\n",
1586 best->aggregator_identifier);
1587 pr_debug("Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1588 best->aggregator_identifier, best->num_of_ports,
1589 best->actor_oper_aggregator_key,
1590 best->partner_oper_aggregator_key,
1591 best->is_individual, best->is_active);
1592
1593 // disable the ports that were related to the former active_aggregator
1594 if (active) {
1595 for (port = active->lag_ports; port;
1596 port = port->next_port_in_aggregator) {
1597 __disable_port(port);
1598 }
1599 }
1600 }
1601
1602 /*
1603 * if the selected aggregator is of join individuals
1604 * (partner_system is NULL), enable their ports
1605 */
1606 active = __get_active_agg(origin);
1607
1608 if (active) {
1609 if (!__agg_has_partner(active)) {
1610 for (port = active->lag_ports; port;
1611 port = port->next_port_in_aggregator) {
1612 __enable_port(port);
1613 }
1614 }
1615 }
1616
1617 if (origin->slave) {
1618 struct bonding *bond;
1619
1620 bond = bond_get_bond_by_slave(origin->slave);
1621 if (bond)
1622 bond_3ad_set_carrier(bond);
1623 }
1624}
1625
1626/**
1627 * ad_clear_agg - clear a given aggregator's parameters
1628 * @aggregator: the aggregator we're looking at
1629 *
1630 */
1631static void ad_clear_agg(struct aggregator *aggregator)
1632{
1633 if (aggregator) {
1634 aggregator->is_individual = false;
1635 aggregator->actor_admin_aggregator_key = 0;
1636 aggregator->actor_oper_aggregator_key = 0;
1637 aggregator->partner_system = null_mac_addr;
1638 aggregator->partner_system_priority = 0;
1639 aggregator->partner_oper_aggregator_key = 0;
1640 aggregator->receive_state = 0;
1641 aggregator->transmit_state = 0;
1642 aggregator->lag_ports = NULL;
1643 aggregator->is_active = 0;
1644 aggregator->num_of_ports = 0;
1645 pr_debug("LAG %d was cleared\n",
1646 aggregator->aggregator_identifier);
1647 }
1648}
1649
1650/**
1651 * ad_initialize_agg - initialize a given aggregator's parameters
1652 * @aggregator: the aggregator we're looking at
1653 *
1654 */
1655static void ad_initialize_agg(struct aggregator *aggregator)
1656{
1657 if (aggregator) {
1658 ad_clear_agg(aggregator);
1659
1660 aggregator->aggregator_mac_address = null_mac_addr;
1661 aggregator->aggregator_identifier = 0;
1662 aggregator->slave = NULL;
1663 }
1664}
1665
1666/**
1667 * ad_initialize_port - initialize a given port's parameters
1668 * @aggregator: the aggregator we're looking at
1669 * @lacp_fast: boolean. whether fast periodic should be used
1670 *
1671 */
1672static void ad_initialize_port(struct port *port, int lacp_fast)
1673{
1674 static const struct port_params tmpl = {
1675 .system_priority = 0xffff,
1676 .key = 1,
1677 .port_number = 1,
1678 .port_priority = 0xff,
1679 .port_state = 1,
1680 };
1681 static const struct lacpdu lacpdu = {
1682 .subtype = 0x01,
1683 .version_number = 0x01,
1684 .tlv_type_actor_info = 0x01,
1685 .actor_information_length = 0x14,
1686 .tlv_type_partner_info = 0x02,
1687 .partner_information_length = 0x14,
1688 .tlv_type_collector_info = 0x03,
1689 .collector_information_length = 0x10,
1690 .collector_max_delay = htons(AD_COLLECTOR_MAX_DELAY),
1691 };
1692
1693 if (port) {
1694 port->actor_port_number = 1;
1695 port->actor_port_priority = 0xff;
1696 port->actor_system = null_mac_addr;
1697 port->actor_system_priority = 0xffff;
1698 port->actor_port_aggregator_identifier = 0;
1699 port->ntt = false;
1700 port->actor_admin_port_key = 1;
1701 port->actor_oper_port_key = 1;
1702 port->actor_admin_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
1703 port->actor_oper_port_state = AD_STATE_AGGREGATION | AD_STATE_LACP_ACTIVITY;
1704
1705 if (lacp_fast)
1706 port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT;
1707
1708 memcpy(&port->partner_admin, &tmpl, sizeof(tmpl));
1709 memcpy(&port->partner_oper, &tmpl, sizeof(tmpl));
1710
1711 port->is_enabled = true;
1712 // ****** private parameters ******
1713 port->sm_vars = 0x3;
1714 port->sm_rx_state = 0;
1715 port->sm_rx_timer_counter = 0;
1716 port->sm_periodic_state = 0;
1717 port->sm_periodic_timer_counter = 0;
1718 port->sm_mux_state = 0;
1719 port->sm_mux_timer_counter = 0;
1720 port->sm_tx_state = 0;
1721 port->sm_tx_timer_counter = 0;
1722 port->slave = NULL;
1723 port->aggregator = NULL;
1724 port->next_port_in_aggregator = NULL;
1725 port->transaction_id = 0;
1726
1727 memcpy(&port->lacpdu, &lacpdu, sizeof(lacpdu));
1728 }
1729}
1730
1731/**
1732 * ad_enable_collecting_distributing - enable a port's transmit/receive
1733 * @port: the port we're looking at
1734 *
1735 * Enable @port if it's in an active aggregator
1736 */
1737static void ad_enable_collecting_distributing(struct port *port)
1738{
1739 if (port->aggregator->is_active) {
1740 pr_debug("Enabling port %d(LAG %d)\n",
1741 port->actor_port_number,
1742 port->aggregator->aggregator_identifier);
1743 __enable_port(port);
1744 }
1745}
1746
1747/**
1748 * ad_disable_collecting_distributing - disable a port's transmit/receive
1749 * @port: the port we're looking at
1750 *
1751 */
1752static void ad_disable_collecting_distributing(struct port *port)
1753{
1754 if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
1755 pr_debug("Disabling port %d(LAG %d)\n",
1756 port->actor_port_number,
1757 port->aggregator->aggregator_identifier);
1758 __disable_port(port);
1759 }
1760}
1761
1762#if 0
1763/**
1764 * ad_marker_info_send - send a marker information frame
1765 * @port: the port we're looking at
1766 *
1767 * This function does nothing since we decided not to implement send and handle
1768 * response for marker PDU's, in this stage, but only to respond to marker
1769 * information.
1770 */
1771static void ad_marker_info_send(struct port *port)
1772{
1773 struct bond_marker marker;
1774 u16 index;
1775
1776 // fill the marker PDU with the appropriate values
1777 marker.subtype = 0x02;
1778 marker.version_number = 0x01;
1779 marker.tlv_type = AD_MARKER_INFORMATION_SUBTYPE;
1780 marker.marker_length = 0x16;
1781 // convert requester_port to Big Endian
1782 marker.requester_port = (((port->actor_port_number & 0xFF) << 8) |((u16)(port->actor_port_number & 0xFF00) >> 8));
1783 marker.requester_system = port->actor_system;
1784 // convert requester_port(u32) to Big Endian
1785 marker.requester_transaction_id =
1786 (((++port->transaction_id & 0xFF) << 24)
1787 | ((port->transaction_id & 0xFF00) << 8)
1788 | ((port->transaction_id & 0xFF0000) >> 8)
1789 | ((port->transaction_id & 0xFF000000) >> 24));
1790 marker.pad = 0;
1791 marker.tlv_type_terminator = 0x00;
1792 marker.terminator_length = 0x00;
1793 for (index = 0; index < 90; index++)
1794 marker.reserved_90[index] = 0;
1795
1796 // send the marker information
1797 if (ad_marker_send(port, &marker) >= 0) {
1798 pr_debug("Sent Marker Information on port %d\n",
1799 port->actor_port_number);
1800 }
1801}
1802#endif
1803
1804/**
1805 * ad_marker_info_received - handle receive of a Marker information frame
1806 * @marker_info: Marker info received
1807 * @port: the port we're looking at
1808 *
1809 */
1810static void ad_marker_info_received(struct bond_marker *marker_info,
1811 struct port *port)
1812{
1813 struct bond_marker marker;
1814
1815 // copy the received marker data to the response marker
1816 //marker = *marker_info;
1817 memcpy(&marker, marker_info, sizeof(struct bond_marker));
1818 // change the marker subtype to marker response
1819 marker.tlv_type = AD_MARKER_RESPONSE_SUBTYPE;
1820 // send the marker response
1821
1822 if (ad_marker_send(port, &marker) >= 0) {
1823 pr_debug("Sent Marker Response on port %d\n",
1824 port->actor_port_number);
1825 }
1826}
1827
1828/**
1829 * ad_marker_response_received - handle receive of a marker response frame
1830 * @marker: marker PDU received
1831 * @port: the port we're looking at
1832 *
1833 * This function does nothing since we decided not to implement send and handle
1834 * response for marker PDU's, in this stage, but only to respond to marker
1835 * information.
1836 */
1837static void ad_marker_response_received(struct bond_marker *marker,
1838 struct port *port)
1839{
1840 marker = NULL; /* just to satisfy the compiler */
1841 port = NULL; /* just to satisfy the compiler */
1842 // DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW
1843}
1844
1845//////////////////////////////////////////////////////////////////////////////////////
1846// ================= AD exported functions to the main bonding code ==================
1847//////////////////////////////////////////////////////////////////////////////////////
1848
1849// Check aggregators status in team every T seconds
1850#define AD_AGGREGATOR_SELECTION_TIMER 8
1851
1852/*
1853 * bond_3ad_initiate_agg_selection(struct bonding *bond)
1854 *
1855 * Set the aggregation selection timer, to initiate an agg selection in
1856 * the very near future. Called during first initialization, and during
1857 * any down to up transitions of the bond.
1858 */
1859void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
1860{
1861 BOND_AD_INFO(bond).agg_select_timer = timeout;
1862}
1863
1864static u16 aggregator_identifier;
1865
1866/**
1867 * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures
1868 * @bond: bonding struct to work on
1869 * @tick_resolution: tick duration (millisecond resolution)
1870 *
1871 * Can be called only after the mac address of the bond is set.
1872 */
1873void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
1874{
1875 // check that the bond is not initialized yet
1876 if (MAC_ADDRESS_COMPARE(&(BOND_AD_INFO(bond).system.sys_mac_addr),
1877 bond->dev->dev_addr)) {
1878
1879 aggregator_identifier = 0;
1880
1881 BOND_AD_INFO(bond).system.sys_priority = 0xFFFF;
1882 BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr);
1883
1884 // initialize how many times this module is called in one second(should be about every 100ms)
1885 ad_ticks_per_sec = tick_resolution;
1886
1887 bond_3ad_initiate_agg_selection(bond,
1888 AD_AGGREGATOR_SELECTION_TIMER *
1889 ad_ticks_per_sec);
1890 }
1891}
1892
1893/**
1894 * bond_3ad_bind_slave - initialize a slave's port
1895 * @slave: slave struct to work on
1896 *
1897 * Returns: 0 on success
1898 * < 0 on error
1899 */
1900int bond_3ad_bind_slave(struct slave *slave)
1901{
1902 struct bonding *bond = bond_get_bond_by_slave(slave);
1903 struct port *port;
1904 struct aggregator *aggregator;
1905
1906 if (bond == NULL) {
1907 pr_err("%s: The slave %s is not attached to its bond\n",
1908 slave->dev->master->name, slave->dev->name);
1909 return -1;
1910 }
1911
1912 //check that the slave has not been initialized yet.
1913 if (SLAVE_AD_INFO(slave).port.slave != slave) {
1914
1915 // port initialization
1916 port = &(SLAVE_AD_INFO(slave).port);
1917
1918 ad_initialize_port(port, bond->params.lacp_fast);
1919
1920 port->slave = slave;
1921 port->actor_port_number = SLAVE_AD_INFO(slave).id;
1922 // key is determined according to the link speed, duplex and user key(which is yet not supported)
1923 // ------------------------------------------------------------
1924 // Port key : | User key | Speed |Duplex|
1925 // ------------------------------------------------------------
1926 // 16 6 1 0
1927 port->actor_admin_port_key = 0; // initialize this parameter
1928 port->actor_admin_port_key |= __get_duplex(port);
1929 port->actor_admin_port_key |= (__get_link_speed(port) << 1);
1930 port->actor_oper_port_key = port->actor_admin_port_key;
1931 // if the port is not full duplex, then the port should be not lacp Enabled
1932 if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS))
1933 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
1934 // actor system is the bond's system
1935 port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
1936 // tx timer(to verify that no more than MAX_TX_IN_SECOND lacpdu's are sent in one second)
1937 port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
1938 port->aggregator = NULL;
1939 port->next_port_in_aggregator = NULL;
1940
1941 __disable_port(port);
1942 __initialize_port_locks(port);
1943
1944
1945 // aggregator initialization
1946 aggregator = &(SLAVE_AD_INFO(slave).aggregator);
1947
1948 ad_initialize_agg(aggregator);
1949
1950 aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr);
1951 aggregator->aggregator_identifier = (++aggregator_identifier);
1952 aggregator->slave = slave;
1953 aggregator->is_active = 0;
1954 aggregator->num_of_ports = 0;
1955 }
1956
1957 return 0;
1958}
1959
1960/**
1961 * bond_3ad_unbind_slave - deinitialize a slave's port
1962 * @slave: slave struct to work on
1963 *
1964 * Search for the aggregator that is related to this port, remove the
1965 * aggregator and assign another aggregator for other port related to it
1966 * (if any), and remove the port.
1967 */
1968void bond_3ad_unbind_slave(struct slave *slave)
1969{
1970 struct port *port, *prev_port, *temp_port;
1971 struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
1972 int select_new_active_agg = 0;
1973
1974 // find the aggregator related to this slave
1975 aggregator = &(SLAVE_AD_INFO(slave).aggregator);
1976
1977 // find the port related to this slave
1978 port = &(SLAVE_AD_INFO(slave).port);
1979
1980 // if slave is null, the whole port is not initialized
1981 if (!port->slave) {
1982 pr_warning("Warning: %s: Trying to unbind an uninitialized port on %s\n",
1983 slave->dev->master->name, slave->dev->name);
1984 return;
1985 }
1986
1987 pr_debug("Unbinding Link Aggregation Group %d\n",
1988 aggregator->aggregator_identifier);
1989
1990 /* Tell the partner that this port is not suitable for aggregation */
1991 port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
1992 __update_lacpdu_from_port(port);
1993 ad_lacpdu_send(port);
1994
1995 // check if this aggregator is occupied
1996 if (aggregator->lag_ports) {
1997 // check if there are other ports related to this aggregator except
1998 // the port related to this slave(thats ensure us that there is a
1999 // reason to search for new aggregator, and that we will find one
2000 if ((aggregator->lag_ports != port) || (aggregator->lag_ports->next_port_in_aggregator)) {
2001 // find new aggregator for the related port(s)
2002 new_aggregator = __get_first_agg(port);
2003 for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
2004 // if the new aggregator is empty, or it is connected to our port only
2005 if (!new_aggregator->lag_ports
2006 || ((new_aggregator->lag_ports == port)
2007 && !new_aggregator->lag_ports->next_port_in_aggregator))
2008 break;
2009 }
2010 // if new aggregator found, copy the aggregator's parameters
2011 // and connect the related lag_ports to the new aggregator
2012 if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
2013 pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n",
2014 aggregator->aggregator_identifier,
2015 new_aggregator->aggregator_identifier);
2016
2017 if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
2018 pr_info("%s: Removing an active aggregator\n",
2019 aggregator->slave->dev->master->name);
2020 // select new active aggregator
2021 select_new_active_agg = 1;
2022 }
2023
2024 new_aggregator->is_individual = aggregator->is_individual;
2025 new_aggregator->actor_admin_aggregator_key = aggregator->actor_admin_aggregator_key;
2026 new_aggregator->actor_oper_aggregator_key = aggregator->actor_oper_aggregator_key;
2027 new_aggregator->partner_system = aggregator->partner_system;
2028 new_aggregator->partner_system_priority = aggregator->partner_system_priority;
2029 new_aggregator->partner_oper_aggregator_key = aggregator->partner_oper_aggregator_key;
2030 new_aggregator->receive_state = aggregator->receive_state;
2031 new_aggregator->transmit_state = aggregator->transmit_state;
2032 new_aggregator->lag_ports = aggregator->lag_ports;
2033 new_aggregator->is_active = aggregator->is_active;
2034 new_aggregator->num_of_ports = aggregator->num_of_ports;
2035
2036 // update the information that is written on the ports about the aggregator
2037 for (temp_port = aggregator->lag_ports; temp_port;
2038 temp_port = temp_port->next_port_in_aggregator) {
2039 temp_port->aggregator = new_aggregator;
2040 temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier;
2041 }
2042
2043 // clear the aggregator
2044 ad_clear_agg(aggregator);
2045
2046 if (select_new_active_agg)
2047 ad_agg_selection_logic(__get_first_agg(port));
2048 } else {
2049 pr_warning("%s: Warning: unbinding aggregator, and could not find a new aggregator for its ports\n",
2050 slave->dev->master->name);
2051 }
2052 } else { // in case that the only port related to this aggregator is the one we want to remove
2053 select_new_active_agg = aggregator->is_active;
2054 // clear the aggregator
2055 ad_clear_agg(aggregator);
2056 if (select_new_active_agg) {
2057 pr_info("%s: Removing an active aggregator\n",
2058 slave->dev->master->name);
2059 // select new active aggregator
2060 ad_agg_selection_logic(__get_first_agg(port));
2061 }
2062 }
2063 }
2064
2065 pr_debug("Unbinding port %d\n", port->actor_port_number);
2066 // find the aggregator that this port is connected to
2067 temp_aggregator = __get_first_agg(port);
2068 for (; temp_aggregator; temp_aggregator = __get_next_agg(temp_aggregator)) {
2069 prev_port = NULL;
2070 // search the port in the aggregator's related ports
2071 for (temp_port = temp_aggregator->lag_ports; temp_port;
2072 prev_port = temp_port,
2073 temp_port = temp_port->next_port_in_aggregator) {
2074 if (temp_port == port) { // the aggregator found - detach the port from this aggregator
2075 if (prev_port)
2076 prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator;
2077 else
2078 temp_aggregator->lag_ports = temp_port->next_port_in_aggregator;
2079 temp_aggregator->num_of_ports--;
2080 if (temp_aggregator->num_of_ports == 0) {
2081 select_new_active_agg = temp_aggregator->is_active;
2082 // clear the aggregator
2083 ad_clear_agg(temp_aggregator);
2084 if (select_new_active_agg) {
2085 pr_info("%s: Removing an active aggregator\n",
2086 slave->dev->master->name);
2087 // select new active aggregator
2088 ad_agg_selection_logic(__get_first_agg(port));
2089 }
2090 }
2091 break;
2092 }
2093 }
2094 }
2095 port->slave = NULL;
2096}
2097
2098/**
2099 * bond_3ad_state_machine_handler - handle state machines timeout
2100 * @bond: bonding struct to work on
2101 *
2102 * The state machine handling concept in this module is to check every tick
2103 * which state machine should operate any function. The execution order is
2104 * round robin, so when we have an interaction between state machines, the
2105 * reply of one to each other might be delayed until next tick.
2106 *
2107 * This function also complete the initialization when the agg_select_timer
2108 * times out, and it selects an aggregator for the ports that are yet not
2109 * related to any aggregator, and selects the active aggregator for a bond.
2110 */
2111void bond_3ad_state_machine_handler(struct work_struct *work)
2112{
2113 struct bonding *bond = container_of(work, struct bonding,
2114 ad_work.work);
2115 struct port *port;
2116 struct aggregator *aggregator;
2117
2118 read_lock(&bond->lock);
2119
2120 if (bond->kill_timers)
2121 goto out;
2122
2123 //check if there are any slaves
2124 if (bond->slave_cnt == 0)
2125 goto re_arm;
2126
2127 // check if agg_select_timer timer after initialize is timed out
2128 if (BOND_AD_INFO(bond).agg_select_timer && !(--BOND_AD_INFO(bond).agg_select_timer)) {
2129 // select the active aggregator for the bond
2130 if ((port = __get_first_port(bond))) {
2131 if (!port->slave) {
2132 pr_warning("%s: Warning: bond's first port is uninitialized\n",
2133 bond->dev->name);
2134 goto re_arm;
2135 }
2136
2137 aggregator = __get_first_agg(port);
2138 ad_agg_selection_logic(aggregator);
2139 }
2140 bond_3ad_set_carrier(bond);
2141 }
2142
2143 // for each port run the state machines
2144 for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
2145 if (!port->slave) {
2146 pr_warning("%s: Warning: Found an uninitialized port\n",
2147 bond->dev->name);
2148 goto re_arm;
2149 }
2150
2151 /* Lock around state machines to protect data accessed
2152 * by all (e.g., port->sm_vars). ad_rx_machine may run
2153 * concurrently due to incoming LACPDU.
2154 */
2155 __get_state_machine_lock(port);
2156
2157 ad_rx_machine(NULL, port);
2158 ad_periodic_machine(port);
2159 ad_port_selection_logic(port);
2160 ad_mux_machine(port);
2161 ad_tx_machine(port);
2162
2163 // turn off the BEGIN bit, since we already handled it
2164 if (port->sm_vars & AD_PORT_BEGIN)
2165 port->sm_vars &= ~AD_PORT_BEGIN;
2166
2167 __release_state_machine_lock(port);
2168 }
2169
2170re_arm:
2171 if (!bond->kill_timers)
2172 queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
2173out:
2174 read_unlock(&bond->lock);
2175}
2176
2177/**
2178 * bond_3ad_rx_indication - handle a received frame
2179 * @lacpdu: received lacpdu
2180 * @slave: slave struct to work on
2181 * @length: length of the data received
2182 *
2183 * It is assumed that frames that were sent on this NIC don't returned as new
2184 * received frames (loopback). Since only the payload is given to this
2185 * function, it check for loopback.
2186 */
2187static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u16 length)
2188{
2189 struct port *port;
2190
2191 if (length >= sizeof(struct lacpdu)) {
2192
2193 port = &(SLAVE_AD_INFO(slave).port);
2194
2195 if (!port->slave) {
2196 pr_warning("%s: Warning: port of slave %s is uninitialized\n",
2197 slave->dev->name, slave->dev->master->name);
2198 return;
2199 }
2200
2201 switch (lacpdu->subtype) {
2202 case AD_TYPE_LACPDU:
2203 pr_debug("Received LACPDU on port %d\n",
2204 port->actor_port_number);
2205 /* Protect against concurrent state machines */
2206 __get_state_machine_lock(port);
2207 ad_rx_machine(lacpdu, port);
2208 __release_state_machine_lock(port);
2209 break;
2210
2211 case AD_TYPE_MARKER:
2212 // No need to convert fields to Little Endian since we don't use the marker's fields.
2213
2214 switch (((struct bond_marker *)lacpdu)->tlv_type) {
2215 case AD_MARKER_INFORMATION_SUBTYPE:
2216 pr_debug("Received Marker Information on port %d\n",
2217 port->actor_port_number);
2218 ad_marker_info_received((struct bond_marker *)lacpdu, port);
2219 break;
2220
2221 case AD_MARKER_RESPONSE_SUBTYPE:
2222 pr_debug("Received Marker Response on port %d\n",
2223 port->actor_port_number);
2224 ad_marker_response_received((struct bond_marker *)lacpdu, port);
2225 break;
2226
2227 default:
2228 pr_debug("Received an unknown Marker subtype on slot %d\n",
2229 port->actor_port_number);
2230 }
2231 }
2232 }
2233}
2234
2235/**
2236 * bond_3ad_adapter_speed_changed - handle a slave's speed change indication
2237 * @slave: slave struct to work on
2238 *
2239 * Handle reselection of aggregator (if needed) for this port.
2240 */
2241void bond_3ad_adapter_speed_changed(struct slave *slave)
2242{
2243 struct port *port;
2244
2245 port = &(SLAVE_AD_INFO(slave).port);
2246
2247 // if slave is null, the whole port is not initialized
2248 if (!port->slave) {
2249 pr_warning("Warning: %s: speed changed for uninitialized port on %s\n",
2250 slave->dev->master->name, slave->dev->name);
2251 return;
2252 }
2253
2254 port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
2255 port->actor_oper_port_key = port->actor_admin_port_key |=
2256 (__get_link_speed(port) << 1);
2257 pr_debug("Port %d changed speed\n", port->actor_port_number);
2258 // there is no need to reselect a new aggregator, just signal the
2259 // state machines to reinitialize
2260 port->sm_vars |= AD_PORT_BEGIN;
2261}
2262
2263/**
2264 * bond_3ad_adapter_duplex_changed - handle a slave's duplex change indication
2265 * @slave: slave struct to work on
2266 *
2267 * Handle reselection of aggregator (if needed) for this port.
2268 */
2269void bond_3ad_adapter_duplex_changed(struct slave *slave)
2270{
2271 struct port *port;
2272
2273 port = &(SLAVE_AD_INFO(slave).port);
2274
2275 // if slave is null, the whole port is not initialized
2276 if (!port->slave) {
2277 pr_warning("%s: Warning: duplex changed for uninitialized port on %s\n",
2278 slave->dev->master->name, slave->dev->name);
2279 return;
2280 }
2281
2282 port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
2283 port->actor_oper_port_key = port->actor_admin_port_key |=
2284 __get_duplex(port);
2285 pr_debug("Port %d changed duplex\n", port->actor_port_number);
2286 // there is no need to reselect a new aggregator, just signal the
2287 // state machines to reinitialize
2288 port->sm_vars |= AD_PORT_BEGIN;
2289}
2290
2291/**
2292 * bond_3ad_handle_link_change - handle a slave's link status change indication
2293 * @slave: slave struct to work on
2294 * @status: whether the link is now up or down
2295 *
2296 * Handle reselection of aggregator (if needed) for this port.
2297 */
2298void bond_3ad_handle_link_change(struct slave *slave, char link)
2299{
2300 struct port *port;
2301
2302 port = &(SLAVE_AD_INFO(slave).port);
2303
2304 // if slave is null, the whole port is not initialized
2305 if (!port->slave) {
2306 pr_warning("Warning: %s: link status changed for uninitialized port on %s\n",
2307 slave->dev->master->name, slave->dev->name);
2308 return;
2309 }
2310
2311 // on link down we are zeroing duplex and speed since some of the adaptors(ce1000.lan) report full duplex/speed instead of N/A(duplex) / 0(speed)
2312 // on link up we are forcing recheck on the duplex and speed since some of he adaptors(ce1000.lan) report
2313 if (link == BOND_LINK_UP) {
2314 port->is_enabled = true;
2315 port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
2316 port->actor_oper_port_key = port->actor_admin_port_key |=
2317 __get_duplex(port);
2318 port->actor_admin_port_key &= ~AD_SPEED_KEY_BITS;
2319 port->actor_oper_port_key = port->actor_admin_port_key |=
2320 (__get_link_speed(port) << 1);
2321 } else {
2322 /* link has failed */
2323 port->is_enabled = false;
2324 port->actor_admin_port_key &= ~AD_DUPLEX_KEY_BITS;
2325 port->actor_oper_port_key = (port->actor_admin_port_key &=
2326 ~AD_SPEED_KEY_BITS);
2327 }
2328 //BOND_PRINT_DBG(("Port %d changed link status to %s", port->actor_port_number, ((link == BOND_LINK_UP)?"UP":"DOWN")));
2329 // there is no need to reselect a new aggregator, just signal the
2330 // state machines to reinitialize
2331 port->sm_vars |= AD_PORT_BEGIN;
2332}
2333
2334/*
2335 * set link state for bonding master: if we have an active
2336 * aggregator, we're up, if not, we're down. Presumes that we cannot
2337 * have an active aggregator if there are no slaves with link up.
2338 *
2339 * This behavior complies with IEEE 802.3 section 43.3.9.
2340 *
2341 * Called by bond_set_carrier(). Return zero if carrier state does not
2342 * change, nonzero if it does.
2343 */
2344int bond_3ad_set_carrier(struct bonding *bond)
2345{
2346 struct aggregator *active;
2347
2348 active = __get_active_agg(&(SLAVE_AD_INFO(bond->first_slave).aggregator));
2349 if (active) {
2350 /* are enough slaves available to consider link up? */
2351 if (active->num_of_ports < bond->params.min_links) {
2352 if (netif_carrier_ok(bond->dev)) {
2353 netif_carrier_off(bond->dev);
2354 return 1;
2355 }
2356 } else if (!netif_carrier_ok(bond->dev)) {
2357 netif_carrier_on(bond->dev);
2358 return 1;
2359 }
2360 return 0;
2361 }
2362
2363 if (netif_carrier_ok(bond->dev)) {
2364 netif_carrier_off(bond->dev);
2365 return 1;
2366 }
2367 return 0;
2368}
2369
2370/**
2371 * bond_3ad_get_active_agg_info - get information of the active aggregator
2372 * @bond: bonding struct to work on
2373 * @ad_info: ad_info struct to fill with the bond's info
2374 *
2375 * Returns: 0 on success
2376 * < 0 on error
2377 */
2378int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
2379{
2380 struct aggregator *aggregator = NULL;
2381 struct port *port;
2382
2383 for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
2384 if (port->aggregator && port->aggregator->is_active) {
2385 aggregator = port->aggregator;
2386 break;
2387 }
2388 }
2389
2390 if (aggregator) {
2391 ad_info->aggregator_id = aggregator->aggregator_identifier;
2392 ad_info->ports = aggregator->num_of_ports;
2393 ad_info->actor_key = aggregator->actor_oper_aggregator_key;
2394 ad_info->partner_key = aggregator->partner_oper_aggregator_key;
2395 memcpy(ad_info->partner_system, aggregator->partner_system.mac_addr_value, ETH_ALEN);
2396 return 0;
2397 }
2398
2399 return -1;
2400}
2401
2402int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
2403{
2404 struct slave *slave, *start_at;
2405 struct bonding *bond = netdev_priv(dev);
2406 int slave_agg_no;
2407 int slaves_in_agg;
2408 int agg_id;
2409 int i;
2410 struct ad_info ad_info;
2411 int res = 1;
2412
2413 if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
2414 pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n",
2415 dev->name);
2416 goto out;
2417 }
2418
2419 slaves_in_agg = ad_info.ports;
2420 agg_id = ad_info.aggregator_id;
2421
2422 if (slaves_in_agg == 0) {
2423 /*the aggregator is empty*/
2424 pr_debug("%s: Error: active aggregator is empty\n", dev->name);
2425 goto out;
2426 }
2427
2428 slave_agg_no = bond->xmit_hash_policy(skb, slaves_in_agg);
2429
2430 bond_for_each_slave(bond, slave, i) {
2431 struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
2432
2433 if (agg && (agg->aggregator_identifier == agg_id)) {
2434 slave_agg_no--;
2435 if (slave_agg_no < 0)
2436 break;
2437 }
2438 }
2439
2440 if (slave_agg_no >= 0) {
2441 pr_err("%s: Error: Couldn't find a slave to tx on for aggregator ID %d\n",
2442 dev->name, agg_id);
2443 goto out;
2444 }
2445
2446 start_at = slave;
2447
2448 bond_for_each_slave_from(bond, slave, i, start_at) {
2449 int slave_agg_id = 0;
2450 struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
2451
2452 if (agg)
2453 slave_agg_id = agg->aggregator_identifier;
2454
2455 if (SLAVE_IS_OK(slave) && agg && (slave_agg_id == agg_id)) {
2456 res = bond_dev_queue_xmit(bond, skb, slave->dev);
2457 break;
2458 }
2459 }
2460
2461out:
2462 if (res) {
2463 /* no suitable interface, frame not sent */
2464 dev_kfree_skb(skb);
2465 }
2466
2467 return NETDEV_TX_OK;
2468}
2469
2470void bond_3ad_lacpdu_recv(struct sk_buff *skb, struct bonding *bond,
2471 struct slave *slave)
2472{
2473 if (skb->protocol != PKT_TYPE_LACPDU)
2474 return;
2475
2476 if (!pskb_may_pull(skb, sizeof(struct lacpdu)))
2477 return;
2478
2479 read_lock(&bond->lock);
2480 bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len);
2481 read_unlock(&bond->lock);
2482}
2483
2484/*
2485 * When modify lacp_rate parameter via sysfs,
2486 * update actor_oper_port_state of each port.
2487 *
2488 * Hold slave->state_machine_lock,
2489 * so we can modify port->actor_oper_port_state,
2490 * no matter bond is up or down.
2491 */
2492void bond_3ad_update_lacp_rate(struct bonding *bond)
2493{
2494 int i;
2495 struct slave *slave;
2496 struct port *port = NULL;
2497 int lacp_fast;
2498
2499 read_lock(&bond->lock);
2500 lacp_fast = bond->params.lacp_fast;
2501
2502 bond_for_each_slave(bond, slave, i) {
2503 port = &(SLAVE_AD_INFO(slave).port);
2504 __get_state_machine_lock(port);
2505 if (lacp_fast)
2506 port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT;
2507 else
2508 port->actor_oper_port_state &= ~AD_STATE_LACP_TIMEOUT;
2509 __release_state_machine_lock(port);
2510 }
2511
2512 read_unlock(&bond->lock);
2513}
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
4 */
5
6#include <linux/skbuff.h>
7#include <linux/if_ether.h>
8#include <linux/netdevice.h>
9#include <linux/spinlock.h>
10#include <linux/ethtool.h>
11#include <linux/etherdevice.h>
12#include <linux/if_bonding.h>
13#include <linux/pkt_sched.h>
14#include <net/net_namespace.h>
15#include <net/bonding.h>
16#include <net/bond_3ad.h>
17#include <net/netlink.h>
18
19/* General definitions */
20#define AD_SHORT_TIMEOUT 1
21#define AD_LONG_TIMEOUT 0
22#define AD_STANDBY 0x2
23#define AD_MAX_TX_IN_SECOND 3
24#define AD_COLLECTOR_MAX_DELAY 0
25
26/* Timer definitions (43.4.4 in the 802.3ad standard) */
27#define AD_FAST_PERIODIC_TIME 1
28#define AD_SLOW_PERIODIC_TIME 30
29#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME)
30#define AD_LONG_TIMEOUT_TIME (3*AD_SLOW_PERIODIC_TIME)
31#define AD_CHURN_DETECTION_TIME 60
32#define AD_AGGREGATE_WAIT_TIME 2
33
34/* Port state definitions (43.4.2.2 in the 802.3ad standard) */
35#define AD_STATE_LACP_ACTIVITY 0x1
36#define AD_STATE_LACP_TIMEOUT 0x2
37#define AD_STATE_AGGREGATION 0x4
38#define AD_STATE_SYNCHRONIZATION 0x8
39#define AD_STATE_COLLECTING 0x10
40#define AD_STATE_DISTRIBUTING 0x20
41#define AD_STATE_DEFAULTED 0x40
42#define AD_STATE_EXPIRED 0x80
43
44/* Port Variables definitions used by the State Machines (43.4.7 in the
45 * 802.3ad standard)
46 */
47#define AD_PORT_BEGIN 0x1
48#define AD_PORT_LACP_ENABLED 0x2
49#define AD_PORT_ACTOR_CHURN 0x4
50#define AD_PORT_PARTNER_CHURN 0x8
51#define AD_PORT_READY 0x10
52#define AD_PORT_READY_N 0x20
53#define AD_PORT_MATCHED 0x40
54#define AD_PORT_STANDBY 0x80
55#define AD_PORT_SELECTED 0x100
56#define AD_PORT_MOVED 0x200
57#define AD_PORT_CHURNED (AD_PORT_ACTOR_CHURN | AD_PORT_PARTNER_CHURN)
58
59/* Port Key definitions
60 * key is determined according to the link speed, duplex and
61 * user key (which is yet not supported)
62 * --------------------------------------------------------------
63 * Port key | User key (10 bits) | Speed (5 bits) | Duplex|
64 * --------------------------------------------------------------
65 * |15 6|5 1|0
66 */
67#define AD_DUPLEX_KEY_MASKS 0x1
68#define AD_SPEED_KEY_MASKS 0x3E
69#define AD_USER_KEY_MASKS 0xFFC0
70
71enum ad_link_speed_type {
72 AD_LINK_SPEED_1MBPS = 1,
73 AD_LINK_SPEED_10MBPS,
74 AD_LINK_SPEED_100MBPS,
75 AD_LINK_SPEED_1000MBPS,
76 AD_LINK_SPEED_2500MBPS,
77 AD_LINK_SPEED_5000MBPS,
78 AD_LINK_SPEED_10000MBPS,
79 AD_LINK_SPEED_14000MBPS,
80 AD_LINK_SPEED_20000MBPS,
81 AD_LINK_SPEED_25000MBPS,
82 AD_LINK_SPEED_40000MBPS,
83 AD_LINK_SPEED_50000MBPS,
84 AD_LINK_SPEED_56000MBPS,
85 AD_LINK_SPEED_100000MBPS,
86};
87
88/* compare MAC addresses */
89#define MAC_ADDRESS_EQUAL(A, B) \
90 ether_addr_equal_64bits((const u8 *)A, (const u8 *)B)
91
92static const u8 null_mac_addr[ETH_ALEN + 2] __long_aligned = {
93 0, 0, 0, 0, 0, 0
94};
95static u16 ad_ticks_per_sec;
96static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
97
98static const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned =
99 MULTICAST_LACPDU_ADDR;
100
101/* ================= main 802.3ad protocol functions ================== */
102static int ad_lacpdu_send(struct port *port);
103static int ad_marker_send(struct port *port, struct bond_marker *marker);
104static void ad_mux_machine(struct port *port, bool *update_slave_arr);
105static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port);
106static void ad_tx_machine(struct port *port);
107static void ad_periodic_machine(struct port *port);
108static void ad_port_selection_logic(struct port *port, bool *update_slave_arr);
109static void ad_agg_selection_logic(struct aggregator *aggregator,
110 bool *update_slave_arr);
111static void ad_clear_agg(struct aggregator *aggregator);
112static void ad_initialize_agg(struct aggregator *aggregator);
113static void ad_initialize_port(struct port *port, int lacp_fast);
114static void ad_enable_collecting_distributing(struct port *port,
115 bool *update_slave_arr);
116static void ad_disable_collecting_distributing(struct port *port,
117 bool *update_slave_arr);
118static void ad_marker_info_received(struct bond_marker *marker_info,
119 struct port *port);
120static void ad_marker_response_received(struct bond_marker *marker,
121 struct port *port);
122static void ad_update_actor_keys(struct port *port, bool reset);
123
124
125/* ================= api to bonding and kernel code ================== */
126
127/**
128 * __get_bond_by_port - get the port's bonding struct
129 * @port: the port we're looking at
130 *
131 * Return @port's bonding struct, or %NULL if it can't be found.
132 */
133static inline struct bonding *__get_bond_by_port(struct port *port)
134{
135 if (port->slave == NULL)
136 return NULL;
137
138 return bond_get_bond_by_slave(port->slave);
139}
140
141/**
142 * __get_first_agg - get the first aggregator in the bond
143 * @bond: the bond we're looking at
144 *
145 * Return the aggregator of the first slave in @bond, or %NULL if it can't be
146 * found.
147 * The caller must hold RCU or RTNL lock.
148 */
149static inline struct aggregator *__get_first_agg(struct port *port)
150{
151 struct bonding *bond = __get_bond_by_port(port);
152 struct slave *first_slave;
153 struct aggregator *agg;
154
155 /* If there's no bond for this port, or bond has no slaves */
156 if (bond == NULL)
157 return NULL;
158
159 rcu_read_lock();
160 first_slave = bond_first_slave_rcu(bond);
161 agg = first_slave ? &(SLAVE_AD_INFO(first_slave)->aggregator) : NULL;
162 rcu_read_unlock();
163
164 return agg;
165}
166
167/**
168 * __agg_has_partner - see if we have a partner
169 * @agg: the agregator we're looking at
170 *
171 * Return nonzero if aggregator has a partner (denoted by a non-zero ether
172 * address for the partner). Return 0 if not.
173 */
174static inline int __agg_has_partner(struct aggregator *agg)
175{
176 return !is_zero_ether_addr(agg->partner_system.mac_addr_value);
177}
178
179/**
180 * __disable_port - disable the port's slave
181 * @port: the port we're looking at
182 */
183static inline void __disable_port(struct port *port)
184{
185 bond_set_slave_inactive_flags(port->slave, BOND_SLAVE_NOTIFY_LATER);
186}
187
188/**
189 * __enable_port - enable the port's slave, if it's up
190 * @port: the port we're looking at
191 */
192static inline void __enable_port(struct port *port)
193{
194 struct slave *slave = port->slave;
195
196 if ((slave->link == BOND_LINK_UP) && bond_slave_is_up(slave))
197 bond_set_slave_active_flags(slave, BOND_SLAVE_NOTIFY_LATER);
198}
199
200/**
201 * __port_is_enabled - check if the port's slave is in active state
202 * @port: the port we're looking at
203 */
204static inline int __port_is_enabled(struct port *port)
205{
206 return bond_is_active_slave(port->slave);
207}
208
209/**
210 * __get_agg_selection_mode - get the aggregator selection mode
211 * @port: the port we're looking at
212 *
213 * Get the aggregator selection mode. Can be %STABLE, %BANDWIDTH or %COUNT.
214 */
215static inline u32 __get_agg_selection_mode(struct port *port)
216{
217 struct bonding *bond = __get_bond_by_port(port);
218
219 if (bond == NULL)
220 return BOND_AD_STABLE;
221
222 return bond->params.ad_select;
223}
224
225/**
226 * __check_agg_selection_timer - check if the selection timer has expired
227 * @port: the port we're looking at
228 */
229static inline int __check_agg_selection_timer(struct port *port)
230{
231 struct bonding *bond = __get_bond_by_port(port);
232
233 if (bond == NULL)
234 return 0;
235
236 return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0;
237}
238
239/**
240 * __get_link_speed - get a port's speed
241 * @port: the port we're looking at
242 *
243 * Return @port's speed in 802.3ad enum format. i.e. one of:
244 * 0,
245 * %AD_LINK_SPEED_10MBPS,
246 * %AD_LINK_SPEED_100MBPS,
247 * %AD_LINK_SPEED_1000MBPS,
248 * %AD_LINK_SPEED_2500MBPS,
249 * %AD_LINK_SPEED_5000MBPS,
250 * %AD_LINK_SPEED_10000MBPS
251 * %AD_LINK_SPEED_14000MBPS,
252 * %AD_LINK_SPEED_20000MBPS
253 * %AD_LINK_SPEED_25000MBPS
254 * %AD_LINK_SPEED_40000MBPS
255 * %AD_LINK_SPEED_50000MBPS
256 * %AD_LINK_SPEED_56000MBPS
257 * %AD_LINK_SPEED_100000MBPS
258 */
259static u16 __get_link_speed(struct port *port)
260{
261 struct slave *slave = port->slave;
262 u16 speed;
263
264 /* this if covers only a special case: when the configuration starts
265 * with link down, it sets the speed to 0.
266 * This is done in spite of the fact that the e100 driver reports 0
267 * to be compatible with MVT in the future.
268 */
269 if (slave->link != BOND_LINK_UP)
270 speed = 0;
271 else {
272 switch (slave->speed) {
273 case SPEED_10:
274 speed = AD_LINK_SPEED_10MBPS;
275 break;
276
277 case SPEED_100:
278 speed = AD_LINK_SPEED_100MBPS;
279 break;
280
281 case SPEED_1000:
282 speed = AD_LINK_SPEED_1000MBPS;
283 break;
284
285 case SPEED_2500:
286 speed = AD_LINK_SPEED_2500MBPS;
287 break;
288
289 case SPEED_5000:
290 speed = AD_LINK_SPEED_5000MBPS;
291 break;
292
293 case SPEED_10000:
294 speed = AD_LINK_SPEED_10000MBPS;
295 break;
296
297 case SPEED_14000:
298 speed = AD_LINK_SPEED_14000MBPS;
299 break;
300
301 case SPEED_20000:
302 speed = AD_LINK_SPEED_20000MBPS;
303 break;
304
305 case SPEED_25000:
306 speed = AD_LINK_SPEED_25000MBPS;
307 break;
308
309 case SPEED_40000:
310 speed = AD_LINK_SPEED_40000MBPS;
311 break;
312
313 case SPEED_50000:
314 speed = AD_LINK_SPEED_50000MBPS;
315 break;
316
317 case SPEED_56000:
318 speed = AD_LINK_SPEED_56000MBPS;
319 break;
320
321 case SPEED_100000:
322 speed = AD_LINK_SPEED_100000MBPS;
323 break;
324
325 default:
326 /* unknown speed value from ethtool. shouldn't happen */
327 if (slave->speed != SPEED_UNKNOWN)
328 pr_warn_once("%s: (slave %s): unknown ethtool speed (%d) for port %d (set it to 0)\n",
329 slave->bond->dev->name,
330 slave->dev->name, slave->speed,
331 port->actor_port_number);
332 speed = 0;
333 break;
334 }
335 }
336
337 slave_dbg(slave->bond->dev, slave->dev, "Port %d Received link speed %d update from adapter\n",
338 port->actor_port_number, speed);
339 return speed;
340}
341
342/**
343 * __get_duplex - get a port's duplex
344 * @port: the port we're looking at
345 *
346 * Return @port's duplex in 802.3ad bitmask format. i.e.:
347 * 0x01 if in full duplex
348 * 0x00 otherwise
349 */
350static u8 __get_duplex(struct port *port)
351{
352 struct slave *slave = port->slave;
353 u8 retval = 0x0;
354
355 /* handling a special case: when the configuration starts with
356 * link down, it sets the duplex to 0.
357 */
358 if (slave->link == BOND_LINK_UP) {
359 switch (slave->duplex) {
360 case DUPLEX_FULL:
361 retval = 0x1;
362 slave_dbg(slave->bond->dev, slave->dev, "Port %d Received status full duplex update from adapter\n",
363 port->actor_port_number);
364 break;
365 case DUPLEX_HALF:
366 default:
367 retval = 0x0;
368 slave_dbg(slave->bond->dev, slave->dev, "Port %d Received status NOT full duplex update from adapter\n",
369 port->actor_port_number);
370 break;
371 }
372 }
373 return retval;
374}
375
376static void __ad_actor_update_port(struct port *port)
377{
378 const struct bonding *bond = bond_get_bond_by_slave(port->slave);
379
380 port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr;
381 port->actor_system_priority = BOND_AD_INFO(bond).system.sys_priority;
382}
383
384/* Conversions */
385
386/**
387 * __ad_timer_to_ticks - convert a given timer type to AD module ticks
388 * @timer_type: which timer to operate
389 * @par: timer parameter. see below
390 *
391 * If @timer_type is %current_while_timer, @par indicates long/short timer.
392 * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME,
393 * %SLOW_PERIODIC_TIME.
394 */
395static u16 __ad_timer_to_ticks(u16 timer_type, u16 par)
396{
397 u16 retval = 0; /* to silence the compiler */
398
399 switch (timer_type) {
400 case AD_CURRENT_WHILE_TIMER: /* for rx machine usage */
401 if (par)
402 retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec);
403 else
404 retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec);
405 break;
406 case AD_ACTOR_CHURN_TIMER: /* for local churn machine */
407 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
408 break;
409 case AD_PERIODIC_TIMER: /* for periodic machine */
410 retval = (par*ad_ticks_per_sec); /* long timeout */
411 break;
412 case AD_PARTNER_CHURN_TIMER: /* for remote churn machine */
413 retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec);
414 break;
415 case AD_WAIT_WHILE_TIMER: /* for selection machine */
416 retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec);
417 break;
418 }
419
420 return retval;
421}
422
423
424/* ================= ad_rx_machine helper functions ================== */
425
426/**
427 * __choose_matched - update a port's matched variable from a received lacpdu
428 * @lacpdu: the lacpdu we've received
429 * @port: the port we're looking at
430 *
431 * Update the value of the matched variable, using parameter values from a
432 * newly received lacpdu. Parameter values for the partner carried in the
433 * received PDU are compared with the corresponding operational parameter
434 * values for the actor. Matched is set to TRUE if all of these parameters
435 * match and the PDU parameter partner_state.aggregation has the same value as
436 * actor_oper_port_state.aggregation and lacp will actively maintain the link
437 * in the aggregation. Matched is also set to TRUE if the value of
438 * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates
439 * an individual link and lacp will actively maintain the link. Otherwise,
440 * matched is set to FALSE. LACP is considered to be actively maintaining the
441 * link if either the PDU's actor_state.lacp_activity variable is TRUE or both
442 * the actor's actor_oper_port_state.lacp_activity and the PDU's
443 * partner_state.lacp_activity variables are TRUE.
444 *
445 * Note: the AD_PORT_MATCHED "variable" is not specified by 802.3ad; it is
446 * used here to implement the language from 802.3ad 43.4.9 that requires
447 * recordPDU to "match" the LACPDU parameters to the stored values.
448 */
449static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
450{
451 /* check if all parameters are alike
452 * or this is individual link(aggregation == FALSE)
453 * then update the state machine Matched variable.
454 */
455 if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
456 (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
457 MAC_ADDRESS_EQUAL(&(lacpdu->partner_system), &(port->actor_system)) &&
458 (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
459 (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
460 ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
461 ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0)
462 ) {
463 port->sm_vars |= AD_PORT_MATCHED;
464 } else {
465 port->sm_vars &= ~AD_PORT_MATCHED;
466 }
467}
468
469/**
470 * __record_pdu - record parameters from a received lacpdu
471 * @lacpdu: the lacpdu we've received
472 * @port: the port we're looking at
473 *
474 * Record the parameter values for the Actor carried in a received lacpdu as
475 * the current partner operational parameter values and sets
476 * actor_oper_port_state.defaulted to FALSE.
477 */
478static void __record_pdu(struct lacpdu *lacpdu, struct port *port)
479{
480 if (lacpdu && port) {
481 struct port_params *partner = &port->partner_oper;
482
483 __choose_matched(lacpdu, port);
484 /* record the new parameter values for the partner
485 * operational
486 */
487 partner->port_number = ntohs(lacpdu->actor_port);
488 partner->port_priority = ntohs(lacpdu->actor_port_priority);
489 partner->system = lacpdu->actor_system;
490 partner->system_priority = ntohs(lacpdu->actor_system_priority);
491 partner->key = ntohs(lacpdu->actor_key);
492 partner->port_state = lacpdu->actor_state;
493
494 /* set actor_oper_port_state.defaulted to FALSE */
495 port->actor_oper_port_state &= ~AD_STATE_DEFAULTED;
496
497 /* set the partner sync. to on if the partner is sync,
498 * and the port is matched
499 */
500 if ((port->sm_vars & AD_PORT_MATCHED) &&
501 (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION)) {
502 partner->port_state |= AD_STATE_SYNCHRONIZATION;
503 slave_dbg(port->slave->bond->dev, port->slave->dev,
504 "partner sync=1\n");
505 } else {
506 partner->port_state &= ~AD_STATE_SYNCHRONIZATION;
507 slave_dbg(port->slave->bond->dev, port->slave->dev,
508 "partner sync=0\n");
509 }
510 }
511}
512
513/**
514 * __record_default - record default parameters
515 * @port: the port we're looking at
516 *
517 * This function records the default parameter values for the partner carried
518 * in the Partner Admin parameters as the current partner operational parameter
519 * values and sets actor_oper_port_state.defaulted to TRUE.
520 */
521static void __record_default(struct port *port)
522{
523 if (port) {
524 /* record the partner admin parameters */
525 memcpy(&port->partner_oper, &port->partner_admin,
526 sizeof(struct port_params));
527
528 /* set actor_oper_port_state.defaulted to true */
529 port->actor_oper_port_state |= AD_STATE_DEFAULTED;
530 }
531}
532
533/**
534 * __update_selected - update a port's Selected variable from a received lacpdu
535 * @lacpdu: the lacpdu we've received
536 * @port: the port we're looking at
537 *
538 * Update the value of the selected variable, using parameter values from a
539 * newly received lacpdu. The parameter values for the Actor carried in the
540 * received PDU are compared with the corresponding operational parameter
541 * values for the ports partner. If one or more of the comparisons shows that
542 * the value(s) received in the PDU differ from the current operational values,
543 * then selected is set to FALSE and actor_oper_port_state.synchronization is
544 * set to out_of_sync. Otherwise, selected remains unchanged.
545 */
546static void __update_selected(struct lacpdu *lacpdu, struct port *port)
547{
548 if (lacpdu && port) {
549 const struct port_params *partner = &port->partner_oper;
550
551 /* check if any parameter is different then
552 * update the state machine selected variable.
553 */
554 if (ntohs(lacpdu->actor_port) != partner->port_number ||
555 ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
556 !MAC_ADDRESS_EQUAL(&lacpdu->actor_system, &partner->system) ||
557 ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
558 ntohs(lacpdu->actor_key) != partner->key ||
559 (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
560 port->sm_vars &= ~AD_PORT_SELECTED;
561 }
562 }
563}
564
565/**
566 * __update_default_selected - update a port's Selected variable from Partner
567 * @port: the port we're looking at
568 *
569 * This function updates the value of the selected variable, using the partner
570 * administrative parameter values. The administrative values are compared with
571 * the corresponding operational parameter values for the partner. If one or
572 * more of the comparisons shows that the administrative value(s) differ from
573 * the current operational values, then Selected is set to FALSE and
574 * actor_oper_port_state.synchronization is set to OUT_OF_SYNC. Otherwise,
575 * Selected remains unchanged.
576 */
577static void __update_default_selected(struct port *port)
578{
579 if (port) {
580 const struct port_params *admin = &port->partner_admin;
581 const struct port_params *oper = &port->partner_oper;
582
583 /* check if any parameter is different then
584 * update the state machine selected variable.
585 */
586 if (admin->port_number != oper->port_number ||
587 admin->port_priority != oper->port_priority ||
588 !MAC_ADDRESS_EQUAL(&admin->system, &oper->system) ||
589 admin->system_priority != oper->system_priority ||
590 admin->key != oper->key ||
591 (admin->port_state & AD_STATE_AGGREGATION)
592 != (oper->port_state & AD_STATE_AGGREGATION)) {
593 port->sm_vars &= ~AD_PORT_SELECTED;
594 }
595 }
596}
597
598/**
599 * __update_ntt - update a port's ntt variable from a received lacpdu
600 * @lacpdu: the lacpdu we've received
601 * @port: the port we're looking at
602 *
603 * Updates the value of the ntt variable, using parameter values from a newly
604 * received lacpdu. The parameter values for the partner carried in the
605 * received PDU are compared with the corresponding operational parameter
606 * values for the Actor. If one or more of the comparisons shows that the
607 * value(s) received in the PDU differ from the current operational values,
608 * then ntt is set to TRUE. Otherwise, ntt remains unchanged.
609 */
610static void __update_ntt(struct lacpdu *lacpdu, struct port *port)
611{
612 /* validate lacpdu and port */
613 if (lacpdu && port) {
614 /* check if any parameter is different then
615 * update the port->ntt.
616 */
617 if ((ntohs(lacpdu->partner_port) != port->actor_port_number) ||
618 (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) ||
619 !MAC_ADDRESS_EQUAL(&(lacpdu->partner_system), &(port->actor_system)) ||
620 (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) ||
621 (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) ||
622 ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) ||
623 ((lacpdu->partner_state & AD_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)) ||
624 ((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) ||
625 ((lacpdu->partner_state & AD_STATE_AGGREGATION) != (port->actor_oper_port_state & AD_STATE_AGGREGATION))
626 ) {
627 port->ntt = true;
628 }
629 }
630}
631
632/**
633 * __agg_ports_are_ready - check if all ports in an aggregator are ready
634 * @aggregator: the aggregator we're looking at
635 *
636 */
637static int __agg_ports_are_ready(struct aggregator *aggregator)
638{
639 struct port *port;
640 int retval = 1;
641
642 if (aggregator) {
643 /* scan all ports in this aggregator to verfy if they are
644 * all ready.
645 */
646 for (port = aggregator->lag_ports;
647 port;
648 port = port->next_port_in_aggregator) {
649 if (!(port->sm_vars & AD_PORT_READY_N)) {
650 retval = 0;
651 break;
652 }
653 }
654 }
655
656 return retval;
657}
658
659/**
660 * __set_agg_ports_ready - set value of Ready bit in all ports of an aggregator
661 * @aggregator: the aggregator we're looking at
662 * @val: Should the ports' ready bit be set on or off
663 *
664 */
665static void __set_agg_ports_ready(struct aggregator *aggregator, int val)
666{
667 struct port *port;
668
669 for (port = aggregator->lag_ports; port;
670 port = port->next_port_in_aggregator) {
671 if (val)
672 port->sm_vars |= AD_PORT_READY;
673 else
674 port->sm_vars &= ~AD_PORT_READY;
675 }
676}
677
678static int __agg_active_ports(struct aggregator *agg)
679{
680 struct port *port;
681 int active = 0;
682
683 for (port = agg->lag_ports; port;
684 port = port->next_port_in_aggregator) {
685 if (port->is_enabled)
686 active++;
687 }
688
689 return active;
690}
691
692/**
693 * __get_agg_bandwidth - get the total bandwidth of an aggregator
694 * @aggregator: the aggregator we're looking at
695 *
696 */
697static u32 __get_agg_bandwidth(struct aggregator *aggregator)
698{
699 int nports = __agg_active_ports(aggregator);
700 u32 bandwidth = 0;
701
702 if (nports) {
703 switch (__get_link_speed(aggregator->lag_ports)) {
704 case AD_LINK_SPEED_1MBPS:
705 bandwidth = nports;
706 break;
707 case AD_LINK_SPEED_10MBPS:
708 bandwidth = nports * 10;
709 break;
710 case AD_LINK_SPEED_100MBPS:
711 bandwidth = nports * 100;
712 break;
713 case AD_LINK_SPEED_1000MBPS:
714 bandwidth = nports * 1000;
715 break;
716 case AD_LINK_SPEED_2500MBPS:
717 bandwidth = nports * 2500;
718 break;
719 case AD_LINK_SPEED_5000MBPS:
720 bandwidth = nports * 5000;
721 break;
722 case AD_LINK_SPEED_10000MBPS:
723 bandwidth = nports * 10000;
724 break;
725 case AD_LINK_SPEED_14000MBPS:
726 bandwidth = nports * 14000;
727 break;
728 case AD_LINK_SPEED_20000MBPS:
729 bandwidth = nports * 20000;
730 break;
731 case AD_LINK_SPEED_25000MBPS:
732 bandwidth = nports * 25000;
733 break;
734 case AD_LINK_SPEED_40000MBPS:
735 bandwidth = nports * 40000;
736 break;
737 case AD_LINK_SPEED_50000MBPS:
738 bandwidth = nports * 50000;
739 break;
740 case AD_LINK_SPEED_56000MBPS:
741 bandwidth = nports * 56000;
742 break;
743 case AD_LINK_SPEED_100000MBPS:
744 bandwidth = nports * 100000;
745 break;
746 default:
747 bandwidth = 0; /* to silence the compiler */
748 }
749 }
750 return bandwidth;
751}
752
753/**
754 * __get_active_agg - get the current active aggregator
755 * @aggregator: the aggregator we're looking at
756 *
757 * Caller must hold RCU lock.
758 */
759static struct aggregator *__get_active_agg(struct aggregator *aggregator)
760{
761 struct bonding *bond = aggregator->slave->bond;
762 struct list_head *iter;
763 struct slave *slave;
764
765 bond_for_each_slave_rcu(bond, slave, iter)
766 if (SLAVE_AD_INFO(slave)->aggregator.is_active)
767 return &(SLAVE_AD_INFO(slave)->aggregator);
768
769 return NULL;
770}
771
772/**
773 * __update_lacpdu_from_port - update a port's lacpdu fields
774 * @port: the port we're looking at
775 */
776static inline void __update_lacpdu_from_port(struct port *port)
777{
778 struct lacpdu *lacpdu = &port->lacpdu;
779 const struct port_params *partner = &port->partner_oper;
780
781 /* update current actual Actor parameters
782 * lacpdu->subtype initialized
783 * lacpdu->version_number initialized
784 * lacpdu->tlv_type_actor_info initialized
785 * lacpdu->actor_information_length initialized
786 */
787
788 lacpdu->actor_system_priority = htons(port->actor_system_priority);
789 lacpdu->actor_system = port->actor_system;
790 lacpdu->actor_key = htons(port->actor_oper_port_key);
791 lacpdu->actor_port_priority = htons(port->actor_port_priority);
792 lacpdu->actor_port = htons(port->actor_port_number);
793 lacpdu->actor_state = port->actor_oper_port_state;
794 slave_dbg(port->slave->bond->dev, port->slave->dev,
795 "update lacpdu: actor port state %x\n",
796 port->actor_oper_port_state);
797
798 /* lacpdu->reserved_3_1 initialized
799 * lacpdu->tlv_type_partner_info initialized
800 * lacpdu->partner_information_length initialized
801 */
802
803 lacpdu->partner_system_priority = htons(partner->system_priority);
804 lacpdu->partner_system = partner->system;
805 lacpdu->partner_key = htons(partner->key);
806 lacpdu->partner_port_priority = htons(partner->port_priority);
807 lacpdu->partner_port = htons(partner->port_number);
808 lacpdu->partner_state = partner->port_state;
809
810 /* lacpdu->reserved_3_2 initialized
811 * lacpdu->tlv_type_collector_info initialized
812 * lacpdu->collector_information_length initialized
813 * collector_max_delay initialized
814 * reserved_12[12] initialized
815 * tlv_type_terminator initialized
816 * terminator_length initialized
817 * reserved_50[50] initialized
818 */
819}
820
821/* ================= main 802.3ad protocol code ========================= */
822
823/**
824 * ad_lacpdu_send - send out a lacpdu packet on a given port
825 * @port: the port we're looking at
826 *
827 * Returns: 0 on success
828 * < 0 on error
829 */
830static int ad_lacpdu_send(struct port *port)
831{
832 struct slave *slave = port->slave;
833 struct sk_buff *skb;
834 struct lacpdu_header *lacpdu_header;
835 int length = sizeof(struct lacpdu_header);
836
837 skb = dev_alloc_skb(length);
838 if (!skb)
839 return -ENOMEM;
840
841 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.lacpdu_tx);
842 atomic64_inc(&BOND_AD_INFO(slave->bond).stats.lacpdu_tx);
843
844 skb->dev = slave->dev;
845 skb_reset_mac_header(skb);
846 skb->network_header = skb->mac_header + ETH_HLEN;
847 skb->protocol = PKT_TYPE_LACPDU;
848 skb->priority = TC_PRIO_CONTROL;
849
850 lacpdu_header = skb_put(skb, length);
851
852 ether_addr_copy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr);
853 /* Note: source address is set to be the member's PERMANENT address,
854 * because we use it to identify loopback lacpdus in receive.
855 */
856 ether_addr_copy(lacpdu_header->hdr.h_source, slave->perm_hwaddr);
857 lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
858
859 lacpdu_header->lacpdu = port->lacpdu;
860
861 dev_queue_xmit(skb);
862
863 return 0;
864}
865
866/**
867 * ad_marker_send - send marker information/response on a given port
868 * @port: the port we're looking at
869 * @marker: marker data to send
870 *
871 * Returns: 0 on success
872 * < 0 on error
873 */
874static int ad_marker_send(struct port *port, struct bond_marker *marker)
875{
876 struct slave *slave = port->slave;
877 struct sk_buff *skb;
878 struct bond_marker_header *marker_header;
879 int length = sizeof(struct bond_marker_header);
880
881 skb = dev_alloc_skb(length + 16);
882 if (!skb)
883 return -ENOMEM;
884
885 switch (marker->tlv_type) {
886 case AD_MARKER_INFORMATION_SUBTYPE:
887 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.marker_tx);
888 atomic64_inc(&BOND_AD_INFO(slave->bond).stats.marker_tx);
889 break;
890 case AD_MARKER_RESPONSE_SUBTYPE:
891 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.marker_resp_tx);
892 atomic64_inc(&BOND_AD_INFO(slave->bond).stats.marker_resp_tx);
893 break;
894 }
895
896 skb_reserve(skb, 16);
897
898 skb->dev = slave->dev;
899 skb_reset_mac_header(skb);
900 skb->network_header = skb->mac_header + ETH_HLEN;
901 skb->protocol = PKT_TYPE_LACPDU;
902
903 marker_header = skb_put(skb, length);
904
905 ether_addr_copy(marker_header->hdr.h_dest, lacpdu_mcast_addr);
906 /* Note: source address is set to be the member's PERMANENT address,
907 * because we use it to identify loopback MARKERs in receive.
908 */
909 ether_addr_copy(marker_header->hdr.h_source, slave->perm_hwaddr);
910 marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
911
912 marker_header->marker = *marker;
913
914 dev_queue_xmit(skb);
915
916 return 0;
917}
918
919/**
920 * ad_mux_machine - handle a port's mux state machine
921 * @port: the port we're looking at
922 * @update_slave_arr: Does slave array need update?
923 */
924static void ad_mux_machine(struct port *port, bool *update_slave_arr)
925{
926 mux_states_t last_state;
927
928 /* keep current State Machine state to compare later if it was
929 * changed
930 */
931 last_state = port->sm_mux_state;
932
933 if (port->sm_vars & AD_PORT_BEGIN) {
934 port->sm_mux_state = AD_MUX_DETACHED;
935 } else {
936 switch (port->sm_mux_state) {
937 case AD_MUX_DETACHED:
938 if ((port->sm_vars & AD_PORT_SELECTED)
939 || (port->sm_vars & AD_PORT_STANDBY))
940 /* if SELECTED or STANDBY */
941 port->sm_mux_state = AD_MUX_WAITING;
942 break;
943 case AD_MUX_WAITING:
944 /* if SELECTED == FALSE return to DETACH state */
945 if (!(port->sm_vars & AD_PORT_SELECTED)) {
946 port->sm_vars &= ~AD_PORT_READY_N;
947 /* in order to withhold the Selection Logic to
948 * check all ports READY_N value every callback
949 * cycle to update ready variable, we check
950 * READY_N and update READY here
951 */
952 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
953 port->sm_mux_state = AD_MUX_DETACHED;
954 break;
955 }
956
957 /* check if the wait_while_timer expired */
958 if (port->sm_mux_timer_counter
959 && !(--port->sm_mux_timer_counter))
960 port->sm_vars |= AD_PORT_READY_N;
961
962 /* in order to withhold the selection logic to check
963 * all ports READY_N value every callback cycle to
964 * update ready variable, we check READY_N and update
965 * READY here
966 */
967 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
968
969 /* if the wait_while_timer expired, and the port is
970 * in READY state, move to ATTACHED state
971 */
972 if ((port->sm_vars & AD_PORT_READY)
973 && !port->sm_mux_timer_counter)
974 port->sm_mux_state = AD_MUX_ATTACHED;
975 break;
976 case AD_MUX_ATTACHED:
977 /* check also if agg_select_timer expired (so the
978 * edable port will take place only after this timer)
979 */
980 if ((port->sm_vars & AD_PORT_SELECTED) &&
981 (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) &&
982 !__check_agg_selection_timer(port)) {
983 if (port->aggregator->is_active)
984 port->sm_mux_state =
985 AD_MUX_COLLECTING_DISTRIBUTING;
986 } else if (!(port->sm_vars & AD_PORT_SELECTED) ||
987 (port->sm_vars & AD_PORT_STANDBY)) {
988 /* if UNSELECTED or STANDBY */
989 port->sm_vars &= ~AD_PORT_READY_N;
990 /* in order to withhold the selection logic to
991 * check all ports READY_N value every callback
992 * cycle to update ready variable, we check
993 * READY_N and update READY here
994 */
995 __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator));
996 port->sm_mux_state = AD_MUX_DETACHED;
997 } else if (port->aggregator->is_active) {
998 port->actor_oper_port_state |=
999 AD_STATE_SYNCHRONIZATION;
1000 }
1001 break;
1002 case AD_MUX_COLLECTING_DISTRIBUTING:
1003 if (!(port->sm_vars & AD_PORT_SELECTED) ||
1004 (port->sm_vars & AD_PORT_STANDBY) ||
1005 !(port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) ||
1006 !(port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) {
1007 port->sm_mux_state = AD_MUX_ATTACHED;
1008 } else {
1009 /* if port state hasn't changed make
1010 * sure that a collecting distributing
1011 * port in an active aggregator is enabled
1012 */
1013 if (port->aggregator &&
1014 port->aggregator->is_active &&
1015 !__port_is_enabled(port)) {
1016
1017 __enable_port(port);
1018 }
1019 }
1020 break;
1021 default:
1022 break;
1023 }
1024 }
1025
1026 /* check if the state machine was changed */
1027 if (port->sm_mux_state != last_state) {
1028 slave_dbg(port->slave->bond->dev, port->slave->dev,
1029 "Mux Machine: Port=%d, Last State=%d, Curr State=%d\n",
1030 port->actor_port_number,
1031 last_state,
1032 port->sm_mux_state);
1033 switch (port->sm_mux_state) {
1034 case AD_MUX_DETACHED:
1035 port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
1036 ad_disable_collecting_distributing(port,
1037 update_slave_arr);
1038 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
1039 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
1040 port->ntt = true;
1041 break;
1042 case AD_MUX_WAITING:
1043 port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0);
1044 break;
1045 case AD_MUX_ATTACHED:
1046 if (port->aggregator->is_active)
1047 port->actor_oper_port_state |=
1048 AD_STATE_SYNCHRONIZATION;
1049 else
1050 port->actor_oper_port_state &=
1051 ~AD_STATE_SYNCHRONIZATION;
1052 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
1053 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
1054 ad_disable_collecting_distributing(port,
1055 update_slave_arr);
1056 port->ntt = true;
1057 break;
1058 case AD_MUX_COLLECTING_DISTRIBUTING:
1059 port->actor_oper_port_state |= AD_STATE_COLLECTING;
1060 port->actor_oper_port_state |= AD_STATE_DISTRIBUTING;
1061 port->actor_oper_port_state |= AD_STATE_SYNCHRONIZATION;
1062 ad_enable_collecting_distributing(port,
1063 update_slave_arr);
1064 port->ntt = true;
1065 break;
1066 default:
1067 break;
1068 }
1069 }
1070}
1071
1072/**
1073 * ad_rx_machine - handle a port's rx State Machine
1074 * @lacpdu: the lacpdu we've received
1075 * @port: the port we're looking at
1076 *
1077 * If lacpdu arrived, stop previous timer (if exists) and set the next state as
1078 * CURRENT. If timer expired set the state machine in the proper state.
1079 * In other cases, this function checks if we need to switch to other state.
1080 */
1081static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
1082{
1083 rx_states_t last_state;
1084
1085 /* keep current State Machine state to compare later if it was
1086 * changed
1087 */
1088 last_state = port->sm_rx_state;
1089
1090 if (lacpdu) {
1091 atomic64_inc(&SLAVE_AD_INFO(port->slave)->stats.lacpdu_rx);
1092 atomic64_inc(&BOND_AD_INFO(port->slave->bond).stats.lacpdu_rx);
1093 }
1094 /* check if state machine should change state */
1095
1096 /* first, check if port was reinitialized */
1097 if (port->sm_vars & AD_PORT_BEGIN) {
1098 port->sm_rx_state = AD_RX_INITIALIZE;
1099 port->sm_vars |= AD_PORT_CHURNED;
1100 /* check if port is not enabled */
1101 } else if (!(port->sm_vars & AD_PORT_BEGIN) && !port->is_enabled)
1102 port->sm_rx_state = AD_RX_PORT_DISABLED;
1103 /* check if new lacpdu arrived */
1104 else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) ||
1105 (port->sm_rx_state == AD_RX_DEFAULTED) ||
1106 (port->sm_rx_state == AD_RX_CURRENT))) {
1107 if (port->sm_rx_state != AD_RX_CURRENT)
1108 port->sm_vars |= AD_PORT_CHURNED;
1109 port->sm_rx_timer_counter = 0;
1110 port->sm_rx_state = AD_RX_CURRENT;
1111 } else {
1112 /* if timer is on, and if it is expired */
1113 if (port->sm_rx_timer_counter &&
1114 !(--port->sm_rx_timer_counter)) {
1115 switch (port->sm_rx_state) {
1116 case AD_RX_EXPIRED:
1117 port->sm_rx_state = AD_RX_DEFAULTED;
1118 break;
1119 case AD_RX_CURRENT:
1120 port->sm_rx_state = AD_RX_EXPIRED;
1121 break;
1122 default:
1123 break;
1124 }
1125 } else {
1126 /* if no lacpdu arrived and no timer is on */
1127 switch (port->sm_rx_state) {
1128 case AD_RX_PORT_DISABLED:
1129 if (port->is_enabled &&
1130 (port->sm_vars & AD_PORT_LACP_ENABLED))
1131 port->sm_rx_state = AD_RX_EXPIRED;
1132 else if (port->is_enabled
1133 && ((port->sm_vars
1134 & AD_PORT_LACP_ENABLED) == 0))
1135 port->sm_rx_state = AD_RX_LACP_DISABLED;
1136 break;
1137 default:
1138 break;
1139
1140 }
1141 }
1142 }
1143
1144 /* check if the State machine was changed or new lacpdu arrived */
1145 if ((port->sm_rx_state != last_state) || (lacpdu)) {
1146 slave_dbg(port->slave->bond->dev, port->slave->dev,
1147 "Rx Machine: Port=%d, Last State=%d, Curr State=%d\n",
1148 port->actor_port_number,
1149 last_state,
1150 port->sm_rx_state);
1151 switch (port->sm_rx_state) {
1152 case AD_RX_INITIALIZE:
1153 if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS))
1154 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
1155 else
1156 port->sm_vars |= AD_PORT_LACP_ENABLED;
1157 port->sm_vars &= ~AD_PORT_SELECTED;
1158 __record_default(port);
1159 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1160 port->sm_rx_state = AD_RX_PORT_DISABLED;
1161
1162 /* Fall Through */
1163 case AD_RX_PORT_DISABLED:
1164 port->sm_vars &= ~AD_PORT_MATCHED;
1165 break;
1166 case AD_RX_LACP_DISABLED:
1167 port->sm_vars &= ~AD_PORT_SELECTED;
1168 __record_default(port);
1169 port->partner_oper.port_state &= ~AD_STATE_AGGREGATION;
1170 port->sm_vars |= AD_PORT_MATCHED;
1171 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1172 break;
1173 case AD_RX_EXPIRED:
1174 /* Reset of the Synchronization flag (Standard 43.4.12)
1175 * This reset cause to disable this port in the
1176 * COLLECTING_DISTRIBUTING state of the mux machine in
1177 * case of EXPIRED even if LINK_DOWN didn't arrive for
1178 * the port.
1179 */
1180 port->partner_oper.port_state &= ~AD_STATE_SYNCHRONIZATION;
1181 port->sm_vars &= ~AD_PORT_MATCHED;
1182 port->partner_oper.port_state |= AD_STATE_LACP_TIMEOUT;
1183 port->partner_oper.port_state |= AD_STATE_LACP_ACTIVITY;
1184 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT));
1185 port->actor_oper_port_state |= AD_STATE_EXPIRED;
1186 port->sm_vars |= AD_PORT_CHURNED;
1187 break;
1188 case AD_RX_DEFAULTED:
1189 __update_default_selected(port);
1190 __record_default(port);
1191 port->sm_vars |= AD_PORT_MATCHED;
1192 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1193 break;
1194 case AD_RX_CURRENT:
1195 /* detect loopback situation */
1196 if (MAC_ADDRESS_EQUAL(&(lacpdu->actor_system),
1197 &(port->actor_system))) {
1198 slave_err(port->slave->bond->dev, port->slave->dev, "An illegal loopback occurred on slave\n"
1199 "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n");
1200 return;
1201 }
1202 __update_selected(lacpdu, port);
1203 __update_ntt(lacpdu, port);
1204 __record_pdu(lacpdu, port);
1205 port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT));
1206 port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
1207 break;
1208 default:
1209 break;
1210 }
1211 }
1212}
1213
1214/**
1215 * ad_churn_machine - handle port churn's state machine
1216 * @port: the port we're looking at
1217 *
1218 */
1219static void ad_churn_machine(struct port *port)
1220{
1221 if (port->sm_vars & AD_PORT_CHURNED) {
1222 port->sm_vars &= ~AD_PORT_CHURNED;
1223 port->sm_churn_actor_state = AD_CHURN_MONITOR;
1224 port->sm_churn_partner_state = AD_CHURN_MONITOR;
1225 port->sm_churn_actor_timer_counter =
1226 __ad_timer_to_ticks(AD_ACTOR_CHURN_TIMER, 0);
1227 port->sm_churn_partner_timer_counter =
1228 __ad_timer_to_ticks(AD_PARTNER_CHURN_TIMER, 0);
1229 return;
1230 }
1231 if (port->sm_churn_actor_timer_counter &&
1232 !(--port->sm_churn_actor_timer_counter) &&
1233 port->sm_churn_actor_state == AD_CHURN_MONITOR) {
1234 if (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION) {
1235 port->sm_churn_actor_state = AD_NO_CHURN;
1236 } else {
1237 port->churn_actor_count++;
1238 port->sm_churn_actor_state = AD_CHURN;
1239 }
1240 }
1241 if (port->sm_churn_partner_timer_counter &&
1242 !(--port->sm_churn_partner_timer_counter) &&
1243 port->sm_churn_partner_state == AD_CHURN_MONITOR) {
1244 if (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) {
1245 port->sm_churn_partner_state = AD_NO_CHURN;
1246 } else {
1247 port->churn_partner_count++;
1248 port->sm_churn_partner_state = AD_CHURN;
1249 }
1250 }
1251}
1252
1253/**
1254 * ad_tx_machine - handle a port's tx state machine
1255 * @port: the port we're looking at
1256 */
1257static void ad_tx_machine(struct port *port)
1258{
1259 /* check if tx timer expired, to verify that we do not send more than
1260 * 3 packets per second
1261 */
1262 if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) {
1263 /* check if there is something to send */
1264 if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) {
1265 __update_lacpdu_from_port(port);
1266
1267 if (ad_lacpdu_send(port) >= 0) {
1268 slave_dbg(port->slave->bond->dev,
1269 port->slave->dev,
1270 "Sent LACPDU on port %d\n",
1271 port->actor_port_number);
1272
1273 /* mark ntt as false, so it will not be sent
1274 * again until demanded
1275 */
1276 port->ntt = false;
1277 }
1278 }
1279 /* restart tx timer(to verify that we will not exceed
1280 * AD_MAX_TX_IN_SECOND
1281 */
1282 port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
1283 }
1284}
1285
1286/**
1287 * ad_periodic_machine - handle a port's periodic state machine
1288 * @port: the port we're looking at
1289 *
1290 * Turn ntt flag on priodically to perform periodic transmission of lacpdu's.
1291 */
1292static void ad_periodic_machine(struct port *port)
1293{
1294 periodic_states_t last_state;
1295
1296 /* keep current state machine state to compare later if it was changed */
1297 last_state = port->sm_periodic_state;
1298
1299 /* check if port was reinitialized */
1300 if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) ||
1301 (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & AD_STATE_LACP_ACTIVITY))
1302 ) {
1303 port->sm_periodic_state = AD_NO_PERIODIC;
1304 }
1305 /* check if state machine should change state */
1306 else if (port->sm_periodic_timer_counter) {
1307 /* check if periodic state machine expired */
1308 if (!(--port->sm_periodic_timer_counter)) {
1309 /* if expired then do tx */
1310 port->sm_periodic_state = AD_PERIODIC_TX;
1311 } else {
1312 /* If not expired, check if there is some new timeout
1313 * parameter from the partner state
1314 */
1315 switch (port->sm_periodic_state) {
1316 case AD_FAST_PERIODIC:
1317 if (!(port->partner_oper.port_state
1318 & AD_STATE_LACP_TIMEOUT))
1319 port->sm_periodic_state = AD_SLOW_PERIODIC;
1320 break;
1321 case AD_SLOW_PERIODIC:
1322 if ((port->partner_oper.port_state & AD_STATE_LACP_TIMEOUT)) {
1323 port->sm_periodic_timer_counter = 0;
1324 port->sm_periodic_state = AD_PERIODIC_TX;
1325 }
1326 break;
1327 default:
1328 break;
1329 }
1330 }
1331 } else {
1332 switch (port->sm_periodic_state) {
1333 case AD_NO_PERIODIC:
1334 port->sm_periodic_state = AD_FAST_PERIODIC;
1335 break;
1336 case AD_PERIODIC_TX:
1337 if (!(port->partner_oper.port_state &
1338 AD_STATE_LACP_TIMEOUT))
1339 port->sm_periodic_state = AD_SLOW_PERIODIC;
1340 else
1341 port->sm_periodic_state = AD_FAST_PERIODIC;
1342 break;
1343 default:
1344 break;
1345 }
1346 }
1347
1348 /* check if the state machine was changed */
1349 if (port->sm_periodic_state != last_state) {
1350 slave_dbg(port->slave->bond->dev, port->slave->dev,
1351 "Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n",
1352 port->actor_port_number, last_state,
1353 port->sm_periodic_state);
1354 switch (port->sm_periodic_state) {
1355 case AD_NO_PERIODIC:
1356 port->sm_periodic_timer_counter = 0;
1357 break;
1358 case AD_FAST_PERIODIC:
1359 /* decrement 1 tick we lost in the PERIODIC_TX cycle */
1360 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1;
1361 break;
1362 case AD_SLOW_PERIODIC:
1363 /* decrement 1 tick we lost in the PERIODIC_TX cycle */
1364 port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1;
1365 break;
1366 case AD_PERIODIC_TX:
1367 port->ntt = true;
1368 break;
1369 default:
1370 break;
1371 }
1372 }
1373}
1374
1375/**
1376 * ad_port_selection_logic - select aggregation groups
1377 * @port: the port we're looking at
1378 * @update_slave_arr: Does slave array need update?
1379 *
1380 * Select aggregation groups, and assign each port for it's aggregetor. The
1381 * selection logic is called in the inititalization (after all the handshkes),
1382 * and after every lacpdu receive (if selected is off).
1383 */
1384static void ad_port_selection_logic(struct port *port, bool *update_slave_arr)
1385{
1386 struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator;
1387 struct port *last_port = NULL, *curr_port;
1388 struct list_head *iter;
1389 struct bonding *bond;
1390 struct slave *slave;
1391 int found = 0;
1392
1393 /* if the port is already Selected, do nothing */
1394 if (port->sm_vars & AD_PORT_SELECTED)
1395 return;
1396
1397 bond = __get_bond_by_port(port);
1398
1399 /* if the port is connected to other aggregator, detach it */
1400 if (port->aggregator) {
1401 /* detach the port from its former aggregator */
1402 temp_aggregator = port->aggregator;
1403 for (curr_port = temp_aggregator->lag_ports; curr_port;
1404 last_port = curr_port,
1405 curr_port = curr_port->next_port_in_aggregator) {
1406 if (curr_port == port) {
1407 temp_aggregator->num_of_ports--;
1408 /* if it is the first port attached to the
1409 * aggregator
1410 */
1411 if (!last_port) {
1412 temp_aggregator->lag_ports =
1413 port->next_port_in_aggregator;
1414 } else {
1415 /* not the first port attached to the
1416 * aggregator
1417 */
1418 last_port->next_port_in_aggregator =
1419 port->next_port_in_aggregator;
1420 }
1421
1422 /* clear the port's relations to this
1423 * aggregator
1424 */
1425 port->aggregator = NULL;
1426 port->next_port_in_aggregator = NULL;
1427 port->actor_port_aggregator_identifier = 0;
1428
1429 slave_dbg(bond->dev, port->slave->dev, "Port %d left LAG %d\n",
1430 port->actor_port_number,
1431 temp_aggregator->aggregator_identifier);
1432 /* if the aggregator is empty, clear its
1433 * parameters, and set it ready to be attached
1434 */
1435 if (!temp_aggregator->lag_ports)
1436 ad_clear_agg(temp_aggregator);
1437 break;
1438 }
1439 }
1440 if (!curr_port) {
1441 /* meaning: the port was related to an aggregator
1442 * but was not on the aggregator port list
1443 */
1444 net_warn_ratelimited("%s: (slave %s): Warning: Port %d was related to aggregator %d but was not on its port list\n",
1445 port->slave->bond->dev->name,
1446 port->slave->dev->name,
1447 port->actor_port_number,
1448 port->aggregator->aggregator_identifier);
1449 }
1450 }
1451 /* search on all aggregators for a suitable aggregator for this port */
1452 bond_for_each_slave(bond, slave, iter) {
1453 aggregator = &(SLAVE_AD_INFO(slave)->aggregator);
1454
1455 /* keep a free aggregator for later use(if needed) */
1456 if (!aggregator->lag_ports) {
1457 if (!free_aggregator)
1458 free_aggregator = aggregator;
1459 continue;
1460 }
1461 /* check if current aggregator suits us */
1462 if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && /* if all parameters match AND */
1463 MAC_ADDRESS_EQUAL(&(aggregator->partner_system), &(port->partner_oper.system)) &&
1464 (aggregator->partner_system_priority == port->partner_oper.system_priority) &&
1465 (aggregator->partner_oper_aggregator_key == port->partner_oper.key)
1466 ) &&
1467 ((!MAC_ADDRESS_EQUAL(&(port->partner_oper.system), &(null_mac_addr)) && /* partner answers */
1468 !aggregator->is_individual) /* but is not individual OR */
1469 )
1470 ) {
1471 /* attach to the founded aggregator */
1472 port->aggregator = aggregator;
1473 port->actor_port_aggregator_identifier =
1474 port->aggregator->aggregator_identifier;
1475 port->next_port_in_aggregator = aggregator->lag_ports;
1476 port->aggregator->num_of_ports++;
1477 aggregator->lag_ports = port;
1478 slave_dbg(bond->dev, slave->dev, "Port %d joined LAG %d (existing LAG)\n",
1479 port->actor_port_number,
1480 port->aggregator->aggregator_identifier);
1481
1482 /* mark this port as selected */
1483 port->sm_vars |= AD_PORT_SELECTED;
1484 found = 1;
1485 break;
1486 }
1487 }
1488
1489 /* the port couldn't find an aggregator - attach it to a new
1490 * aggregator
1491 */
1492 if (!found) {
1493 if (free_aggregator) {
1494 /* assign port a new aggregator */
1495 port->aggregator = free_aggregator;
1496 port->actor_port_aggregator_identifier =
1497 port->aggregator->aggregator_identifier;
1498
1499 /* update the new aggregator's parameters
1500 * if port was responsed from the end-user
1501 */
1502 if (port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS)
1503 /* if port is full duplex */
1504 port->aggregator->is_individual = false;
1505 else
1506 port->aggregator->is_individual = true;
1507
1508 port->aggregator->actor_admin_aggregator_key =
1509 port->actor_admin_port_key;
1510 port->aggregator->actor_oper_aggregator_key =
1511 port->actor_oper_port_key;
1512 port->aggregator->partner_system =
1513 port->partner_oper.system;
1514 port->aggregator->partner_system_priority =
1515 port->partner_oper.system_priority;
1516 port->aggregator->partner_oper_aggregator_key = port->partner_oper.key;
1517 port->aggregator->receive_state = 1;
1518 port->aggregator->transmit_state = 1;
1519 port->aggregator->lag_ports = port;
1520 port->aggregator->num_of_ports++;
1521
1522 /* mark this port as selected */
1523 port->sm_vars |= AD_PORT_SELECTED;
1524
1525 slave_dbg(bond->dev, port->slave->dev, "Port %d joined LAG %d (new LAG)\n",
1526 port->actor_port_number,
1527 port->aggregator->aggregator_identifier);
1528 } else {
1529 slave_err(bond->dev, port->slave->dev,
1530 "Port %d did not find a suitable aggregator\n",
1531 port->actor_port_number);
1532 }
1533 }
1534 /* if all aggregator's ports are READY_N == TRUE, set ready=TRUE
1535 * in all aggregator's ports, else set ready=FALSE in all
1536 * aggregator's ports
1537 */
1538 __set_agg_ports_ready(port->aggregator,
1539 __agg_ports_are_ready(port->aggregator));
1540
1541 aggregator = __get_first_agg(port);
1542 ad_agg_selection_logic(aggregator, update_slave_arr);
1543
1544 if (!port->aggregator->is_active)
1545 port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
1546}
1547
1548/* Decide if "agg" is a better choice for the new active aggregator that
1549 * the current best, according to the ad_select policy.
1550 */
1551static struct aggregator *ad_agg_selection_test(struct aggregator *best,
1552 struct aggregator *curr)
1553{
1554 /* 0. If no best, select current.
1555 *
1556 * 1. If the current agg is not individual, and the best is
1557 * individual, select current.
1558 *
1559 * 2. If current agg is individual and the best is not, keep best.
1560 *
1561 * 3. Therefore, current and best are both individual or both not
1562 * individual, so:
1563 *
1564 * 3a. If current agg partner replied, and best agg partner did not,
1565 * select current.
1566 *
1567 * 3b. If current agg partner did not reply and best agg partner
1568 * did reply, keep best.
1569 *
1570 * 4. Therefore, current and best both have partner replies or
1571 * both do not, so perform selection policy:
1572 *
1573 * BOND_AD_COUNT: Select by count of ports. If count is equal,
1574 * select by bandwidth.
1575 *
1576 * BOND_AD_STABLE, BOND_AD_BANDWIDTH: Select by bandwidth.
1577 */
1578 if (!best)
1579 return curr;
1580
1581 if (!curr->is_individual && best->is_individual)
1582 return curr;
1583
1584 if (curr->is_individual && !best->is_individual)
1585 return best;
1586
1587 if (__agg_has_partner(curr) && !__agg_has_partner(best))
1588 return curr;
1589
1590 if (!__agg_has_partner(curr) && __agg_has_partner(best))
1591 return best;
1592
1593 switch (__get_agg_selection_mode(curr->lag_ports)) {
1594 case BOND_AD_COUNT:
1595 if (__agg_active_ports(curr) > __agg_active_ports(best))
1596 return curr;
1597
1598 if (__agg_active_ports(curr) < __agg_active_ports(best))
1599 return best;
1600
1601 /*FALLTHROUGH*/
1602 case BOND_AD_STABLE:
1603 case BOND_AD_BANDWIDTH:
1604 if (__get_agg_bandwidth(curr) > __get_agg_bandwidth(best))
1605 return curr;
1606
1607 break;
1608
1609 default:
1610 net_warn_ratelimited("%s: (slave %s): Impossible agg select mode %d\n",
1611 curr->slave->bond->dev->name,
1612 curr->slave->dev->name,
1613 __get_agg_selection_mode(curr->lag_ports));
1614 break;
1615 }
1616
1617 return best;
1618}
1619
1620static int agg_device_up(const struct aggregator *agg)
1621{
1622 struct port *port = agg->lag_ports;
1623
1624 if (!port)
1625 return 0;
1626
1627 for (port = agg->lag_ports; port;
1628 port = port->next_port_in_aggregator) {
1629 if (netif_running(port->slave->dev) &&
1630 netif_carrier_ok(port->slave->dev))
1631 return 1;
1632 }
1633
1634 return 0;
1635}
1636
1637/**
1638 * ad_agg_selection_logic - select an aggregation group for a team
1639 * @aggregator: the aggregator we're looking at
1640 * @update_slave_arr: Does slave array need update?
1641 *
1642 * It is assumed that only one aggregator may be selected for a team.
1643 *
1644 * The logic of this function is to select the aggregator according to
1645 * the ad_select policy:
1646 *
1647 * BOND_AD_STABLE: select the aggregator with the most ports attached to
1648 * it, and to reselect the active aggregator only if the previous
1649 * aggregator has no more ports related to it.
1650 *
1651 * BOND_AD_BANDWIDTH: select the aggregator with the highest total
1652 * bandwidth, and reselect whenever a link state change takes place or the
1653 * set of slaves in the bond changes.
1654 *
1655 * BOND_AD_COUNT: select the aggregator with largest number of ports
1656 * (slaves), and reselect whenever a link state change takes place or the
1657 * set of slaves in the bond changes.
1658 *
1659 * FIXME: this function MUST be called with the first agg in the bond, or
1660 * __get_active_agg() won't work correctly. This function should be better
1661 * called with the bond itself, and retrieve the first agg from it.
1662 */
1663static void ad_agg_selection_logic(struct aggregator *agg,
1664 bool *update_slave_arr)
1665{
1666 struct aggregator *best, *active, *origin;
1667 struct bonding *bond = agg->slave->bond;
1668 struct list_head *iter;
1669 struct slave *slave;
1670 struct port *port;
1671
1672 rcu_read_lock();
1673 origin = agg;
1674 active = __get_active_agg(agg);
1675 best = (active && agg_device_up(active)) ? active : NULL;
1676
1677 bond_for_each_slave_rcu(bond, slave, iter) {
1678 agg = &(SLAVE_AD_INFO(slave)->aggregator);
1679
1680 agg->is_active = 0;
1681
1682 if (__agg_active_ports(agg) && agg_device_up(agg))
1683 best = ad_agg_selection_test(best, agg);
1684 }
1685
1686 if (best &&
1687 __get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) {
1688 /* For the STABLE policy, don't replace the old active
1689 * aggregator if it's still active (it has an answering
1690 * partner) or if both the best and active don't have an
1691 * answering partner.
1692 */
1693 if (active && active->lag_ports &&
1694 __agg_active_ports(active) &&
1695 (__agg_has_partner(active) ||
1696 (!__agg_has_partner(active) &&
1697 !__agg_has_partner(best)))) {
1698 if (!(!active->actor_oper_aggregator_key &&
1699 best->actor_oper_aggregator_key)) {
1700 best = NULL;
1701 active->is_active = 1;
1702 }
1703 }
1704 }
1705
1706 if (best && (best == active)) {
1707 best = NULL;
1708 active->is_active = 1;
1709 }
1710
1711 /* if there is new best aggregator, activate it */
1712 if (best) {
1713 netdev_dbg(bond->dev, "(slave %s): best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1714 best->slave ? best->slave->dev->name : "NULL",
1715 best->aggregator_identifier, best->num_of_ports,
1716 best->actor_oper_aggregator_key,
1717 best->partner_oper_aggregator_key,
1718 best->is_individual, best->is_active);
1719 netdev_dbg(bond->dev, "(slave %s): best ports %p slave %p\n",
1720 best->slave ? best->slave->dev->name : "NULL",
1721 best->lag_ports, best->slave);
1722
1723 bond_for_each_slave_rcu(bond, slave, iter) {
1724 agg = &(SLAVE_AD_INFO(slave)->aggregator);
1725
1726 slave_dbg(bond->dev, slave->dev, "Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1727 agg->aggregator_identifier, agg->num_of_ports,
1728 agg->actor_oper_aggregator_key,
1729 agg->partner_oper_aggregator_key,
1730 agg->is_individual, agg->is_active);
1731 }
1732
1733 /* check if any partner replies */
1734 if (best->is_individual)
1735 net_warn_ratelimited("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
1736 bond->dev->name);
1737
1738 best->is_active = 1;
1739 netdev_dbg(bond->dev, "(slave %s): LAG %d chosen as the active LAG\n",
1740 best->slave ? best->slave->dev->name : "NULL",
1741 best->aggregator_identifier);
1742 netdev_dbg(bond->dev, "(slave %s): Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
1743 best->slave ? best->slave->dev->name : "NULL",
1744 best->aggregator_identifier, best->num_of_ports,
1745 best->actor_oper_aggregator_key,
1746 best->partner_oper_aggregator_key,
1747 best->is_individual, best->is_active);
1748
1749 /* disable the ports that were related to the former
1750 * active_aggregator
1751 */
1752 if (active) {
1753 for (port = active->lag_ports; port;
1754 port = port->next_port_in_aggregator) {
1755 __disable_port(port);
1756 }
1757 }
1758 /* Slave array needs update. */
1759 *update_slave_arr = true;
1760 }
1761
1762 /* if the selected aggregator is of join individuals
1763 * (partner_system is NULL), enable their ports
1764 */
1765 active = __get_active_agg(origin);
1766
1767 if (active) {
1768 if (!__agg_has_partner(active)) {
1769 for (port = active->lag_ports; port;
1770 port = port->next_port_in_aggregator) {
1771 __enable_port(port);
1772 }
1773 }
1774 }
1775
1776 rcu_read_unlock();
1777
1778 bond_3ad_set_carrier(bond);
1779}
1780
1781/**
1782 * ad_clear_agg - clear a given aggregator's parameters
1783 * @aggregator: the aggregator we're looking at
1784 */
1785static void ad_clear_agg(struct aggregator *aggregator)
1786{
1787 if (aggregator) {
1788 aggregator->is_individual = false;
1789 aggregator->actor_admin_aggregator_key = 0;
1790 aggregator->actor_oper_aggregator_key = 0;
1791 eth_zero_addr(aggregator->partner_system.mac_addr_value);
1792 aggregator->partner_system_priority = 0;
1793 aggregator->partner_oper_aggregator_key = 0;
1794 aggregator->receive_state = 0;
1795 aggregator->transmit_state = 0;
1796 aggregator->lag_ports = NULL;
1797 aggregator->is_active = 0;
1798 aggregator->num_of_ports = 0;
1799 pr_debug("%s: LAG %d was cleared\n",
1800 aggregator->slave ?
1801 aggregator->slave->dev->name : "NULL",
1802 aggregator->aggregator_identifier);
1803 }
1804}
1805
1806/**
1807 * ad_initialize_agg - initialize a given aggregator's parameters
1808 * @aggregator: the aggregator we're looking at
1809 */
1810static void ad_initialize_agg(struct aggregator *aggregator)
1811{
1812 if (aggregator) {
1813 ad_clear_agg(aggregator);
1814
1815 eth_zero_addr(aggregator->aggregator_mac_address.mac_addr_value);
1816 aggregator->aggregator_identifier = 0;
1817 aggregator->slave = NULL;
1818 }
1819}
1820
1821/**
1822 * ad_initialize_port - initialize a given port's parameters
1823 * @aggregator: the aggregator we're looking at
1824 * @lacp_fast: boolean. whether fast periodic should be used
1825 */
1826static void ad_initialize_port(struct port *port, int lacp_fast)
1827{
1828 static const struct port_params tmpl = {
1829 .system_priority = 0xffff,
1830 .key = 1,
1831 .port_number = 1,
1832 .port_priority = 0xff,
1833 .port_state = 1,
1834 };
1835 static const struct lacpdu lacpdu = {
1836 .subtype = 0x01,
1837 .version_number = 0x01,
1838 .tlv_type_actor_info = 0x01,
1839 .actor_information_length = 0x14,
1840 .tlv_type_partner_info = 0x02,
1841 .partner_information_length = 0x14,
1842 .tlv_type_collector_info = 0x03,
1843 .collector_information_length = 0x10,
1844 .collector_max_delay = htons(AD_COLLECTOR_MAX_DELAY),
1845 };
1846
1847 if (port) {
1848 port->actor_port_priority = 0xff;
1849 port->actor_port_aggregator_identifier = 0;
1850 port->ntt = false;
1851 port->actor_admin_port_state = AD_STATE_AGGREGATION |
1852 AD_STATE_LACP_ACTIVITY;
1853 port->actor_oper_port_state = AD_STATE_AGGREGATION |
1854 AD_STATE_LACP_ACTIVITY;
1855
1856 if (lacp_fast)
1857 port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT;
1858
1859 memcpy(&port->partner_admin, &tmpl, sizeof(tmpl));
1860 memcpy(&port->partner_oper, &tmpl, sizeof(tmpl));
1861
1862 port->is_enabled = true;
1863 /* private parameters */
1864 port->sm_vars = AD_PORT_BEGIN | AD_PORT_LACP_ENABLED;
1865 port->sm_rx_state = 0;
1866 port->sm_rx_timer_counter = 0;
1867 port->sm_periodic_state = 0;
1868 port->sm_periodic_timer_counter = 0;
1869 port->sm_mux_state = 0;
1870 port->sm_mux_timer_counter = 0;
1871 port->sm_tx_state = 0;
1872 port->aggregator = NULL;
1873 port->next_port_in_aggregator = NULL;
1874 port->transaction_id = 0;
1875
1876 port->sm_churn_actor_timer_counter = 0;
1877 port->sm_churn_actor_state = 0;
1878 port->churn_actor_count = 0;
1879 port->sm_churn_partner_timer_counter = 0;
1880 port->sm_churn_partner_state = 0;
1881 port->churn_partner_count = 0;
1882
1883 memcpy(&port->lacpdu, &lacpdu, sizeof(lacpdu));
1884 }
1885}
1886
1887/**
1888 * ad_enable_collecting_distributing - enable a port's transmit/receive
1889 * @port: the port we're looking at
1890 * @update_slave_arr: Does slave array need update?
1891 *
1892 * Enable @port if it's in an active aggregator
1893 */
1894static void ad_enable_collecting_distributing(struct port *port,
1895 bool *update_slave_arr)
1896{
1897 if (port->aggregator->is_active) {
1898 slave_dbg(port->slave->bond->dev, port->slave->dev,
1899 "Enabling port %d (LAG %d)\n",
1900 port->actor_port_number,
1901 port->aggregator->aggregator_identifier);
1902 __enable_port(port);
1903 /* Slave array needs update */
1904 *update_slave_arr = true;
1905 }
1906}
1907
1908/**
1909 * ad_disable_collecting_distributing - disable a port's transmit/receive
1910 * @port: the port we're looking at
1911 * @update_slave_arr: Does slave array need update?
1912 */
1913static void ad_disable_collecting_distributing(struct port *port,
1914 bool *update_slave_arr)
1915{
1916 if (port->aggregator &&
1917 !MAC_ADDRESS_EQUAL(&(port->aggregator->partner_system),
1918 &(null_mac_addr))) {
1919 slave_dbg(port->slave->bond->dev, port->slave->dev,
1920 "Disabling port %d (LAG %d)\n",
1921 port->actor_port_number,
1922 port->aggregator->aggregator_identifier);
1923 __disable_port(port);
1924 /* Slave array needs an update */
1925 *update_slave_arr = true;
1926 }
1927}
1928
1929/**
1930 * ad_marker_info_received - handle receive of a Marker information frame
1931 * @marker_info: Marker info received
1932 * @port: the port we're looking at
1933 */
1934static void ad_marker_info_received(struct bond_marker *marker_info,
1935 struct port *port)
1936{
1937 struct bond_marker marker;
1938
1939 atomic64_inc(&SLAVE_AD_INFO(port->slave)->stats.marker_rx);
1940 atomic64_inc(&BOND_AD_INFO(port->slave->bond).stats.marker_rx);
1941
1942 /* copy the received marker data to the response marker */
1943 memcpy(&marker, marker_info, sizeof(struct bond_marker));
1944 /* change the marker subtype to marker response */
1945 marker.tlv_type = AD_MARKER_RESPONSE_SUBTYPE;
1946
1947 /* send the marker response */
1948 if (ad_marker_send(port, &marker) >= 0)
1949 slave_dbg(port->slave->bond->dev, port->slave->dev,
1950 "Sent Marker Response on port %d\n",
1951 port->actor_port_number);
1952}
1953
1954/**
1955 * ad_marker_response_received - handle receive of a marker response frame
1956 * @marker: marker PDU received
1957 * @port: the port we're looking at
1958 *
1959 * This function does nothing since we decided not to implement send and handle
1960 * response for marker PDU's, in this stage, but only to respond to marker
1961 * information.
1962 */
1963static void ad_marker_response_received(struct bond_marker *marker,
1964 struct port *port)
1965{
1966 atomic64_inc(&SLAVE_AD_INFO(port->slave)->stats.marker_resp_rx);
1967 atomic64_inc(&BOND_AD_INFO(port->slave->bond).stats.marker_resp_rx);
1968
1969 /* DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW */
1970}
1971
1972/* ========= AD exported functions to the main bonding code ========= */
1973
1974/* Check aggregators status in team every T seconds */
1975#define AD_AGGREGATOR_SELECTION_TIMER 8
1976
1977/**
1978 * bond_3ad_initiate_agg_selection - initate aggregator selection
1979 * @bond: bonding struct
1980 *
1981 * Set the aggregation selection timer, to initiate an agg selection in
1982 * the very near future. Called during first initialization, and during
1983 * any down to up transitions of the bond.
1984 */
1985void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
1986{
1987 BOND_AD_INFO(bond).agg_select_timer = timeout;
1988}
1989
1990/**
1991 * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures
1992 * @bond: bonding struct to work on
1993 * @tick_resolution: tick duration (millisecond resolution)
1994 *
1995 * Can be called only after the mac address of the bond is set.
1996 */
1997void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
1998{
1999 /* check that the bond is not initialized yet */
2000 if (!MAC_ADDRESS_EQUAL(&(BOND_AD_INFO(bond).system.sys_mac_addr),
2001 bond->dev->dev_addr)) {
2002
2003 BOND_AD_INFO(bond).aggregator_identifier = 0;
2004
2005 BOND_AD_INFO(bond).system.sys_priority =
2006 bond->params.ad_actor_sys_prio;
2007 if (is_zero_ether_addr(bond->params.ad_actor_system))
2008 BOND_AD_INFO(bond).system.sys_mac_addr =
2009 *((struct mac_addr *)bond->dev->dev_addr);
2010 else
2011 BOND_AD_INFO(bond).system.sys_mac_addr =
2012 *((struct mac_addr *)bond->params.ad_actor_system);
2013
2014 /* initialize how many times this module is called in one
2015 * second (should be about every 100ms)
2016 */
2017 ad_ticks_per_sec = tick_resolution;
2018
2019 bond_3ad_initiate_agg_selection(bond,
2020 AD_AGGREGATOR_SELECTION_TIMER *
2021 ad_ticks_per_sec);
2022 }
2023}
2024
2025/**
2026 * bond_3ad_bind_slave - initialize a slave's port
2027 * @slave: slave struct to work on
2028 *
2029 * Returns: 0 on success
2030 * < 0 on error
2031 */
2032void bond_3ad_bind_slave(struct slave *slave)
2033{
2034 struct bonding *bond = bond_get_bond_by_slave(slave);
2035 struct port *port;
2036 struct aggregator *aggregator;
2037
2038 /* check that the slave has not been initialized yet. */
2039 if (SLAVE_AD_INFO(slave)->port.slave != slave) {
2040
2041 /* port initialization */
2042 port = &(SLAVE_AD_INFO(slave)->port);
2043
2044 ad_initialize_port(port, bond->params.lacp_fast);
2045
2046 port->slave = slave;
2047 port->actor_port_number = SLAVE_AD_INFO(slave)->id;
2048 /* key is determined according to the link speed, duplex and
2049 * user key
2050 */
2051 port->actor_admin_port_key = bond->params.ad_user_port_key << 6;
2052 ad_update_actor_keys(port, false);
2053 /* actor system is the bond's system */
2054 __ad_actor_update_port(port);
2055 /* tx timer(to verify that no more than MAX_TX_IN_SECOND
2056 * lacpdu's are sent in one second)
2057 */
2058 port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND;
2059
2060 __disable_port(port);
2061
2062 /* aggregator initialization */
2063 aggregator = &(SLAVE_AD_INFO(slave)->aggregator);
2064
2065 ad_initialize_agg(aggregator);
2066
2067 aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr);
2068 aggregator->aggregator_identifier = ++BOND_AD_INFO(bond).aggregator_identifier;
2069 aggregator->slave = slave;
2070 aggregator->is_active = 0;
2071 aggregator->num_of_ports = 0;
2072 }
2073}
2074
2075/**
2076 * bond_3ad_unbind_slave - deinitialize a slave's port
2077 * @slave: slave struct to work on
2078 *
2079 * Search for the aggregator that is related to this port, remove the
2080 * aggregator and assign another aggregator for other port related to it
2081 * (if any), and remove the port.
2082 */
2083void bond_3ad_unbind_slave(struct slave *slave)
2084{
2085 struct port *port, *prev_port, *temp_port;
2086 struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
2087 int select_new_active_agg = 0;
2088 struct bonding *bond = slave->bond;
2089 struct slave *slave_iter;
2090 struct list_head *iter;
2091 bool dummy_slave_update; /* Ignore this value as caller updates array */
2092
2093 /* Sync against bond_3ad_state_machine_handler() */
2094 spin_lock_bh(&bond->mode_lock);
2095 aggregator = &(SLAVE_AD_INFO(slave)->aggregator);
2096 port = &(SLAVE_AD_INFO(slave)->port);
2097
2098 /* if slave is null, the whole port is not initialized */
2099 if (!port->slave) {
2100 slave_warn(bond->dev, slave->dev, "Trying to unbind an uninitialized port\n");
2101 goto out;
2102 }
2103
2104 slave_dbg(bond->dev, slave->dev, "Unbinding Link Aggregation Group %d\n",
2105 aggregator->aggregator_identifier);
2106
2107 /* Tell the partner that this port is not suitable for aggregation */
2108 port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION;
2109 port->actor_oper_port_state &= ~AD_STATE_COLLECTING;
2110 port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING;
2111 port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
2112 __update_lacpdu_from_port(port);
2113 ad_lacpdu_send(port);
2114
2115 /* check if this aggregator is occupied */
2116 if (aggregator->lag_ports) {
2117 /* check if there are other ports related to this aggregator
2118 * except the port related to this slave(thats ensure us that
2119 * there is a reason to search for new aggregator, and that we
2120 * will find one
2121 */
2122 if ((aggregator->lag_ports != port) ||
2123 (aggregator->lag_ports->next_port_in_aggregator)) {
2124 /* find new aggregator for the related port(s) */
2125 bond_for_each_slave(bond, slave_iter, iter) {
2126 new_aggregator = &(SLAVE_AD_INFO(slave_iter)->aggregator);
2127 /* if the new aggregator is empty, or it is
2128 * connected to our port only
2129 */
2130 if (!new_aggregator->lag_ports ||
2131 ((new_aggregator->lag_ports == port) &&
2132 !new_aggregator->lag_ports->next_port_in_aggregator))
2133 break;
2134 }
2135 if (!slave_iter)
2136 new_aggregator = NULL;
2137
2138 /* if new aggregator found, copy the aggregator's
2139 * parameters and connect the related lag_ports to the
2140 * new aggregator
2141 */
2142 if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
2143 slave_dbg(bond->dev, slave->dev, "Some port(s) related to LAG %d - replacing with LAG %d\n",
2144 aggregator->aggregator_identifier,
2145 new_aggregator->aggregator_identifier);
2146
2147 if ((new_aggregator->lag_ports == port) &&
2148 new_aggregator->is_active) {
2149 slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
2150 select_new_active_agg = 1;
2151 }
2152
2153 new_aggregator->is_individual = aggregator->is_individual;
2154 new_aggregator->actor_admin_aggregator_key = aggregator->actor_admin_aggregator_key;
2155 new_aggregator->actor_oper_aggregator_key = aggregator->actor_oper_aggregator_key;
2156 new_aggregator->partner_system = aggregator->partner_system;
2157 new_aggregator->partner_system_priority = aggregator->partner_system_priority;
2158 new_aggregator->partner_oper_aggregator_key = aggregator->partner_oper_aggregator_key;
2159 new_aggregator->receive_state = aggregator->receive_state;
2160 new_aggregator->transmit_state = aggregator->transmit_state;
2161 new_aggregator->lag_ports = aggregator->lag_ports;
2162 new_aggregator->is_active = aggregator->is_active;
2163 new_aggregator->num_of_ports = aggregator->num_of_ports;
2164
2165 /* update the information that is written on
2166 * the ports about the aggregator
2167 */
2168 for (temp_port = aggregator->lag_ports; temp_port;
2169 temp_port = temp_port->next_port_in_aggregator) {
2170 temp_port->aggregator = new_aggregator;
2171 temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier;
2172 }
2173
2174 ad_clear_agg(aggregator);
2175
2176 if (select_new_active_agg)
2177 ad_agg_selection_logic(__get_first_agg(port),
2178 &dummy_slave_update);
2179 } else {
2180 slave_warn(bond->dev, slave->dev, "unbinding aggregator, and could not find a new aggregator for its ports\n");
2181 }
2182 } else {
2183 /* in case that the only port related to this
2184 * aggregator is the one we want to remove
2185 */
2186 select_new_active_agg = aggregator->is_active;
2187 ad_clear_agg(aggregator);
2188 if (select_new_active_agg) {
2189 slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
2190 /* select new active aggregator */
2191 temp_aggregator = __get_first_agg(port);
2192 if (temp_aggregator)
2193 ad_agg_selection_logic(temp_aggregator,
2194 &dummy_slave_update);
2195 }
2196 }
2197 }
2198
2199 slave_dbg(bond->dev, slave->dev, "Unbinding port %d\n", port->actor_port_number);
2200
2201 /* find the aggregator that this port is connected to */
2202 bond_for_each_slave(bond, slave_iter, iter) {
2203 temp_aggregator = &(SLAVE_AD_INFO(slave_iter)->aggregator);
2204 prev_port = NULL;
2205 /* search the port in the aggregator's related ports */
2206 for (temp_port = temp_aggregator->lag_ports; temp_port;
2207 prev_port = temp_port,
2208 temp_port = temp_port->next_port_in_aggregator) {
2209 if (temp_port == port) {
2210 /* the aggregator found - detach the port from
2211 * this aggregator
2212 */
2213 if (prev_port)
2214 prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator;
2215 else
2216 temp_aggregator->lag_ports = temp_port->next_port_in_aggregator;
2217 temp_aggregator->num_of_ports--;
2218 if (__agg_active_ports(temp_aggregator) == 0) {
2219 select_new_active_agg = temp_aggregator->is_active;
2220 ad_clear_agg(temp_aggregator);
2221 if (select_new_active_agg) {
2222 slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
2223 /* select new active aggregator */
2224 ad_agg_selection_logic(__get_first_agg(port),
2225 &dummy_slave_update);
2226 }
2227 }
2228 break;
2229 }
2230 }
2231 }
2232 port->slave = NULL;
2233
2234out:
2235 spin_unlock_bh(&bond->mode_lock);
2236}
2237
2238/**
2239 * bond_3ad_update_ad_actor_settings - reflect change of actor settings to ports
2240 * @bond: bonding struct to work on
2241 *
2242 * If an ad_actor setting gets changed we need to update the individual port
2243 * settings so the bond device will use the new values when it gets upped.
2244 */
2245void bond_3ad_update_ad_actor_settings(struct bonding *bond)
2246{
2247 struct list_head *iter;
2248 struct slave *slave;
2249
2250 ASSERT_RTNL();
2251
2252 BOND_AD_INFO(bond).system.sys_priority = bond->params.ad_actor_sys_prio;
2253 if (is_zero_ether_addr(bond->params.ad_actor_system))
2254 BOND_AD_INFO(bond).system.sys_mac_addr =
2255 *((struct mac_addr *)bond->dev->dev_addr);
2256 else
2257 BOND_AD_INFO(bond).system.sys_mac_addr =
2258 *((struct mac_addr *)bond->params.ad_actor_system);
2259
2260 spin_lock_bh(&bond->mode_lock);
2261 bond_for_each_slave(bond, slave, iter) {
2262 struct port *port = &(SLAVE_AD_INFO(slave))->port;
2263
2264 __ad_actor_update_port(port);
2265 port->ntt = true;
2266 }
2267 spin_unlock_bh(&bond->mode_lock);
2268}
2269
2270/**
2271 * bond_3ad_state_machine_handler - handle state machines timeout
2272 * @bond: bonding struct to work on
2273 *
2274 * The state machine handling concept in this module is to check every tick
2275 * which state machine should operate any function. The execution order is
2276 * round robin, so when we have an interaction between state machines, the
2277 * reply of one to each other might be delayed until next tick.
2278 *
2279 * This function also complete the initialization when the agg_select_timer
2280 * times out, and it selects an aggregator for the ports that are yet not
2281 * related to any aggregator, and selects the active aggregator for a bond.
2282 */
2283void bond_3ad_state_machine_handler(struct work_struct *work)
2284{
2285 struct bonding *bond = container_of(work, struct bonding,
2286 ad_work.work);
2287 struct aggregator *aggregator;
2288 struct list_head *iter;
2289 struct slave *slave;
2290 struct port *port;
2291 bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER;
2292 bool update_slave_arr = false;
2293
2294 /* Lock to protect data accessed by all (e.g., port->sm_vars) and
2295 * against running with bond_3ad_unbind_slave. ad_rx_machine may run
2296 * concurrently due to incoming LACPDU as well.
2297 */
2298 spin_lock_bh(&bond->mode_lock);
2299 rcu_read_lock();
2300
2301 /* check if there are any slaves */
2302 if (!bond_has_slaves(bond))
2303 goto re_arm;
2304
2305 /* check if agg_select_timer timer after initialize is timed out */
2306 if (BOND_AD_INFO(bond).agg_select_timer &&
2307 !(--BOND_AD_INFO(bond).agg_select_timer)) {
2308 slave = bond_first_slave_rcu(bond);
2309 port = slave ? &(SLAVE_AD_INFO(slave)->port) : NULL;
2310
2311 /* select the active aggregator for the bond */
2312 if (port) {
2313 if (!port->slave) {
2314 net_warn_ratelimited("%s: Warning: bond's first port is uninitialized\n",
2315 bond->dev->name);
2316 goto re_arm;
2317 }
2318
2319 aggregator = __get_first_agg(port);
2320 ad_agg_selection_logic(aggregator, &update_slave_arr);
2321 }
2322 bond_3ad_set_carrier(bond);
2323 }
2324
2325 /* for each port run the state machines */
2326 bond_for_each_slave_rcu(bond, slave, iter) {
2327 port = &(SLAVE_AD_INFO(slave)->port);
2328 if (!port->slave) {
2329 net_warn_ratelimited("%s: Warning: Found an uninitialized port\n",
2330 bond->dev->name);
2331 goto re_arm;
2332 }
2333
2334 ad_rx_machine(NULL, port);
2335 ad_periodic_machine(port);
2336 ad_port_selection_logic(port, &update_slave_arr);
2337 ad_mux_machine(port, &update_slave_arr);
2338 ad_tx_machine(port);
2339 ad_churn_machine(port);
2340
2341 /* turn off the BEGIN bit, since we already handled it */
2342 if (port->sm_vars & AD_PORT_BEGIN)
2343 port->sm_vars &= ~AD_PORT_BEGIN;
2344 }
2345
2346re_arm:
2347 bond_for_each_slave_rcu(bond, slave, iter) {
2348 if (slave->should_notify) {
2349 should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW;
2350 break;
2351 }
2352 }
2353 rcu_read_unlock();
2354 spin_unlock_bh(&bond->mode_lock);
2355
2356 if (update_slave_arr)
2357 bond_slave_arr_work_rearm(bond, 0);
2358
2359 if (should_notify_rtnl && rtnl_trylock()) {
2360 bond_slave_state_notify(bond);
2361 rtnl_unlock();
2362 }
2363 queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
2364}
2365
2366/**
2367 * bond_3ad_rx_indication - handle a received frame
2368 * @lacpdu: received lacpdu
2369 * @slave: slave struct to work on
2370 *
2371 * It is assumed that frames that were sent on this NIC don't returned as new
2372 * received frames (loopback). Since only the payload is given to this
2373 * function, it check for loopback.
2374 */
2375static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave)
2376{
2377 struct bonding *bond = slave->bond;
2378 int ret = RX_HANDLER_ANOTHER;
2379 struct bond_marker *marker;
2380 struct port *port;
2381 atomic64_t *stat;
2382
2383 port = &(SLAVE_AD_INFO(slave)->port);
2384 if (!port->slave) {
2385 net_warn_ratelimited("%s: Warning: port of slave %s is uninitialized\n",
2386 slave->dev->name, slave->bond->dev->name);
2387 return ret;
2388 }
2389
2390 switch (lacpdu->subtype) {
2391 case AD_TYPE_LACPDU:
2392 ret = RX_HANDLER_CONSUMED;
2393 slave_dbg(slave->bond->dev, slave->dev,
2394 "Received LACPDU on port %d\n",
2395 port->actor_port_number);
2396 /* Protect against concurrent state machines */
2397 spin_lock(&slave->bond->mode_lock);
2398 ad_rx_machine(lacpdu, port);
2399 spin_unlock(&slave->bond->mode_lock);
2400 break;
2401 case AD_TYPE_MARKER:
2402 ret = RX_HANDLER_CONSUMED;
2403 /* No need to convert fields to Little Endian since we
2404 * don't use the marker's fields.
2405 */
2406 marker = (struct bond_marker *)lacpdu;
2407 switch (marker->tlv_type) {
2408 case AD_MARKER_INFORMATION_SUBTYPE:
2409 slave_dbg(slave->bond->dev, slave->dev, "Received Marker Information on port %d\n",
2410 port->actor_port_number);
2411 ad_marker_info_received(marker, port);
2412 break;
2413 case AD_MARKER_RESPONSE_SUBTYPE:
2414 slave_dbg(slave->bond->dev, slave->dev, "Received Marker Response on port %d\n",
2415 port->actor_port_number);
2416 ad_marker_response_received(marker, port);
2417 break;
2418 default:
2419 slave_dbg(slave->bond->dev, slave->dev, "Received an unknown Marker subtype on port %d\n",
2420 port->actor_port_number);
2421 stat = &SLAVE_AD_INFO(slave)->stats.marker_unknown_rx;
2422 atomic64_inc(stat);
2423 stat = &BOND_AD_INFO(bond).stats.marker_unknown_rx;
2424 atomic64_inc(stat);
2425 }
2426 break;
2427 default:
2428 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.lacpdu_unknown_rx);
2429 atomic64_inc(&BOND_AD_INFO(bond).stats.lacpdu_unknown_rx);
2430 }
2431
2432 return ret;
2433}
2434
2435/**
2436 * ad_update_actor_keys - Update the oper / admin keys for a port based on
2437 * its current speed and duplex settings.
2438 *
2439 * @port: the port we'are looking at
2440 * @reset: Boolean to just reset the speed and the duplex part of the key
2441 *
2442 * The logic to change the oper / admin keys is:
2443 * (a) A full duplex port can participate in LACP with partner.
2444 * (b) When the speed is changed, LACP need to be reinitiated.
2445 */
2446static void ad_update_actor_keys(struct port *port, bool reset)
2447{
2448 u8 duplex = 0;
2449 u16 ospeed = 0, speed = 0;
2450 u16 old_oper_key = port->actor_oper_port_key;
2451
2452 port->actor_admin_port_key &= ~(AD_SPEED_KEY_MASKS|AD_DUPLEX_KEY_MASKS);
2453 if (!reset) {
2454 speed = __get_link_speed(port);
2455 ospeed = (old_oper_key & AD_SPEED_KEY_MASKS) >> 1;
2456 duplex = __get_duplex(port);
2457 port->actor_admin_port_key |= (speed << 1) | duplex;
2458 }
2459 port->actor_oper_port_key = port->actor_admin_port_key;
2460
2461 if (old_oper_key != port->actor_oper_port_key) {
2462 /* Only 'duplex' port participates in LACP */
2463 if (duplex)
2464 port->sm_vars |= AD_PORT_LACP_ENABLED;
2465 else
2466 port->sm_vars &= ~AD_PORT_LACP_ENABLED;
2467
2468 if (!reset) {
2469 if (!speed) {
2470 slave_err(port->slave->bond->dev,
2471 port->slave->dev,
2472 "speed changed to 0 on port %d\n",
2473 port->actor_port_number);
2474 } else if (duplex && ospeed != speed) {
2475 /* Speed change restarts LACP state-machine */
2476 port->sm_vars |= AD_PORT_BEGIN;
2477 }
2478 }
2479 }
2480}
2481
2482/**
2483 * bond_3ad_adapter_speed_duplex_changed - handle a slave's speed / duplex
2484 * change indication
2485 *
2486 * @slave: slave struct to work on
2487 *
2488 * Handle reselection of aggregator (if needed) for this port.
2489 */
2490void bond_3ad_adapter_speed_duplex_changed(struct slave *slave)
2491{
2492 struct port *port;
2493
2494 port = &(SLAVE_AD_INFO(slave)->port);
2495
2496 /* if slave is null, the whole port is not initialized */
2497 if (!port->slave) {
2498 slave_warn(slave->bond->dev, slave->dev,
2499 "speed/duplex changed for uninitialized port\n");
2500 return;
2501 }
2502
2503 spin_lock_bh(&slave->bond->mode_lock);
2504 ad_update_actor_keys(port, false);
2505 spin_unlock_bh(&slave->bond->mode_lock);
2506 slave_dbg(slave->bond->dev, slave->dev, "Port %d changed speed/duplex\n",
2507 port->actor_port_number);
2508}
2509
2510/**
2511 * bond_3ad_handle_link_change - handle a slave's link status change indication
2512 * @slave: slave struct to work on
2513 * @status: whether the link is now up or down
2514 *
2515 * Handle reselection of aggregator (if needed) for this port.
2516 */
2517void bond_3ad_handle_link_change(struct slave *slave, char link)
2518{
2519 struct aggregator *agg;
2520 struct port *port;
2521 bool dummy;
2522
2523 port = &(SLAVE_AD_INFO(slave)->port);
2524
2525 /* if slave is null, the whole port is not initialized */
2526 if (!port->slave) {
2527 slave_warn(slave->bond->dev, slave->dev, "link status changed for uninitialized port\n");
2528 return;
2529 }
2530
2531 spin_lock_bh(&slave->bond->mode_lock);
2532 /* on link down we are zeroing duplex and speed since
2533 * some of the adaptors(ce1000.lan) report full duplex/speed
2534 * instead of N/A(duplex) / 0(speed).
2535 *
2536 * on link up we are forcing recheck on the duplex and speed since
2537 * some of he adaptors(ce1000.lan) report.
2538 */
2539 if (link == BOND_LINK_UP) {
2540 port->is_enabled = true;
2541 ad_update_actor_keys(port, false);
2542 } else {
2543 /* link has failed */
2544 port->is_enabled = false;
2545 ad_update_actor_keys(port, true);
2546 }
2547 agg = __get_first_agg(port);
2548 ad_agg_selection_logic(agg, &dummy);
2549
2550 spin_unlock_bh(&slave->bond->mode_lock);
2551
2552 slave_dbg(slave->bond->dev, slave->dev, "Port %d changed link status to %s\n",
2553 port->actor_port_number,
2554 link == BOND_LINK_UP ? "UP" : "DOWN");
2555
2556 /* RTNL is held and mode_lock is released so it's safe
2557 * to update slave_array here.
2558 */
2559 bond_update_slave_arr(slave->bond, NULL);
2560}
2561
2562/**
2563 * bond_3ad_set_carrier - set link state for bonding master
2564 * @bond - bonding structure
2565 *
2566 * if we have an active aggregator, we're up, if not, we're down.
2567 * Presumes that we cannot have an active aggregator if there are
2568 * no slaves with link up.
2569 *
2570 * This behavior complies with IEEE 802.3 section 43.3.9.
2571 *
2572 * Called by bond_set_carrier(). Return zero if carrier state does not
2573 * change, nonzero if it does.
2574 */
2575int bond_3ad_set_carrier(struct bonding *bond)
2576{
2577 struct aggregator *active;
2578 struct slave *first_slave;
2579 int ret = 1;
2580
2581 rcu_read_lock();
2582 first_slave = bond_first_slave_rcu(bond);
2583 if (!first_slave) {
2584 ret = 0;
2585 goto out;
2586 }
2587 active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator));
2588 if (active) {
2589 /* are enough slaves available to consider link up? */
2590 if (__agg_active_ports(active) < bond->params.min_links) {
2591 if (netif_carrier_ok(bond->dev)) {
2592 netif_carrier_off(bond->dev);
2593 goto out;
2594 }
2595 } else if (!netif_carrier_ok(bond->dev)) {
2596 netif_carrier_on(bond->dev);
2597 goto out;
2598 }
2599 } else if (netif_carrier_ok(bond->dev)) {
2600 netif_carrier_off(bond->dev);
2601 }
2602out:
2603 rcu_read_unlock();
2604 return ret;
2605}
2606
2607/**
2608 * __bond_3ad_get_active_agg_info - get information of the active aggregator
2609 * @bond: bonding struct to work on
2610 * @ad_info: ad_info struct to fill with the bond's info
2611 *
2612 * Returns: 0 on success
2613 * < 0 on error
2614 */
2615int __bond_3ad_get_active_agg_info(struct bonding *bond,
2616 struct ad_info *ad_info)
2617{
2618 struct aggregator *aggregator = NULL;
2619 struct list_head *iter;
2620 struct slave *slave;
2621 struct port *port;
2622
2623 bond_for_each_slave_rcu(bond, slave, iter) {
2624 port = &(SLAVE_AD_INFO(slave)->port);
2625 if (port->aggregator && port->aggregator->is_active) {
2626 aggregator = port->aggregator;
2627 break;
2628 }
2629 }
2630
2631 if (!aggregator)
2632 return -1;
2633
2634 ad_info->aggregator_id = aggregator->aggregator_identifier;
2635 ad_info->ports = __agg_active_ports(aggregator);
2636 ad_info->actor_key = aggregator->actor_oper_aggregator_key;
2637 ad_info->partner_key = aggregator->partner_oper_aggregator_key;
2638 ether_addr_copy(ad_info->partner_system,
2639 aggregator->partner_system.mac_addr_value);
2640 return 0;
2641}
2642
2643int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info)
2644{
2645 int ret;
2646
2647 rcu_read_lock();
2648 ret = __bond_3ad_get_active_agg_info(bond, ad_info);
2649 rcu_read_unlock();
2650
2651 return ret;
2652}
2653
2654int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond,
2655 struct slave *slave)
2656{
2657 struct lacpdu *lacpdu, _lacpdu;
2658
2659 if (skb->protocol != PKT_TYPE_LACPDU)
2660 return RX_HANDLER_ANOTHER;
2661
2662 if (!MAC_ADDRESS_EQUAL(eth_hdr(skb)->h_dest, lacpdu_mcast_addr))
2663 return RX_HANDLER_ANOTHER;
2664
2665 lacpdu = skb_header_pointer(skb, 0, sizeof(_lacpdu), &_lacpdu);
2666 if (!lacpdu) {
2667 atomic64_inc(&SLAVE_AD_INFO(slave)->stats.lacpdu_illegal_rx);
2668 atomic64_inc(&BOND_AD_INFO(bond).stats.lacpdu_illegal_rx);
2669 return RX_HANDLER_ANOTHER;
2670 }
2671
2672 return bond_3ad_rx_indication(lacpdu, slave);
2673}
2674
2675/**
2676 * bond_3ad_update_lacp_rate - change the lacp rate
2677 * @bond - bonding struct
2678 *
2679 * When modify lacp_rate parameter via sysfs,
2680 * update actor_oper_port_state of each port.
2681 *
2682 * Hold bond->mode_lock,
2683 * so we can modify port->actor_oper_port_state,
2684 * no matter bond is up or down.
2685 */
2686void bond_3ad_update_lacp_rate(struct bonding *bond)
2687{
2688 struct port *port = NULL;
2689 struct list_head *iter;
2690 struct slave *slave;
2691 int lacp_fast;
2692
2693 lacp_fast = bond->params.lacp_fast;
2694 spin_lock_bh(&bond->mode_lock);
2695 bond_for_each_slave(bond, slave, iter) {
2696 port = &(SLAVE_AD_INFO(slave)->port);
2697 if (lacp_fast)
2698 port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT;
2699 else
2700 port->actor_oper_port_state &= ~AD_STATE_LACP_TIMEOUT;
2701 }
2702 spin_unlock_bh(&bond->mode_lock);
2703}
2704
2705size_t bond_3ad_stats_size(void)
2706{
2707 return nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_RX */
2708 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_TX */
2709 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_UNKNOWN_RX */
2710 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_LACPDU_ILLEGAL_RX */
2711 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_RX */
2712 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_TX */
2713 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_RESP_RX */
2714 nla_total_size_64bit(sizeof(u64)) + /* BOND_3AD_STAT_MARKER_RESP_TX */
2715 nla_total_size_64bit(sizeof(u64)); /* BOND_3AD_STAT_MARKER_UNKNOWN_RX */
2716}
2717
2718int bond_3ad_stats_fill(struct sk_buff *skb, struct bond_3ad_stats *stats)
2719{
2720 u64 val;
2721
2722 val = atomic64_read(&stats->lacpdu_rx);
2723 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_RX, val,
2724 BOND_3AD_STAT_PAD))
2725 return -EMSGSIZE;
2726 val = atomic64_read(&stats->lacpdu_tx);
2727 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_TX, val,
2728 BOND_3AD_STAT_PAD))
2729 return -EMSGSIZE;
2730 val = atomic64_read(&stats->lacpdu_unknown_rx);
2731 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_UNKNOWN_RX, val,
2732 BOND_3AD_STAT_PAD))
2733 return -EMSGSIZE;
2734 val = atomic64_read(&stats->lacpdu_illegal_rx);
2735 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_LACPDU_ILLEGAL_RX, val,
2736 BOND_3AD_STAT_PAD))
2737 return -EMSGSIZE;
2738
2739 val = atomic64_read(&stats->marker_rx);
2740 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_RX, val,
2741 BOND_3AD_STAT_PAD))
2742 return -EMSGSIZE;
2743 val = atomic64_read(&stats->marker_tx);
2744 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_TX, val,
2745 BOND_3AD_STAT_PAD))
2746 return -EMSGSIZE;
2747 val = atomic64_read(&stats->marker_resp_rx);
2748 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_RESP_RX, val,
2749 BOND_3AD_STAT_PAD))
2750 return -EMSGSIZE;
2751 val = atomic64_read(&stats->marker_resp_tx);
2752 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_RESP_TX, val,
2753 BOND_3AD_STAT_PAD))
2754 return -EMSGSIZE;
2755 val = atomic64_read(&stats->marker_unknown_rx);
2756 if (nla_put_u64_64bit(skb, BOND_3AD_STAT_MARKER_UNKNOWN_RX, val,
2757 BOND_3AD_STAT_PAD))
2758 return -EMSGSIZE;
2759
2760 return 0;
2761}