Loading...
1/*
2 * Copyright (c) 2001-2005 Edouard TISSERANT <edouard.tisserant@wanadoo.fr>
3 * Copyright (c) 2004-2005 Stephane VOLTZ <svoltz@numericable.fr>
4 *
5 * USB Acecad "Acecad Flair" tablet support
6 *
7 * Changelog:
8 * v3.2 - Added sysfs support
9 */
10
11/*
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 *
26 */
27
28#include <linux/kernel.h>
29#include <linux/slab.h>
30#include <linux/module.h>
31#include <linux/init.h>
32#include <linux/usb/input.h>
33
34/*
35 * Version Information
36 */
37#define DRIVER_VERSION "v3.2"
38#define DRIVER_DESC "USB Acecad Flair tablet driver"
39#define DRIVER_LICENSE "GPL"
40#define DRIVER_AUTHOR "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
41
42MODULE_AUTHOR(DRIVER_AUTHOR);
43MODULE_DESCRIPTION(DRIVER_DESC);
44MODULE_LICENSE(DRIVER_LICENSE);
45
46#define USB_VENDOR_ID_ACECAD 0x0460
47#define USB_DEVICE_ID_FLAIR 0x0004
48#define USB_DEVICE_ID_302 0x0008
49
50struct usb_acecad {
51 char name[128];
52 char phys[64];
53 struct usb_device *usbdev;
54 struct input_dev *input;
55 struct urb *irq;
56
57 unsigned char *data;
58 dma_addr_t data_dma;
59};
60
61static void usb_acecad_irq(struct urb *urb)
62{
63 struct usb_acecad *acecad = urb->context;
64 unsigned char *data = acecad->data;
65 struct input_dev *dev = acecad->input;
66 int prox, status;
67
68 switch (urb->status) {
69 case 0:
70 /* success */
71 break;
72 case -ECONNRESET:
73 case -ENOENT:
74 case -ESHUTDOWN:
75 /* this urb is terminated, clean up */
76 dbg("%s - urb shutting down with status: %d", __func__, urb->status);
77 return;
78 default:
79 dbg("%s - nonzero urb status received: %d", __func__, urb->status);
80 goto resubmit;
81 }
82
83 prox = (data[0] & 0x04) >> 2;
84 input_report_key(dev, BTN_TOOL_PEN, prox);
85
86 if (prox) {
87 int x = data[1] | (data[2] << 8);
88 int y = data[3] | (data[4] << 8);
89 /* Pressure should compute the same way for flair and 302 */
90 int pressure = data[5] | (data[6] << 8);
91 int touch = data[0] & 0x01;
92 int stylus = (data[0] & 0x10) >> 4;
93 int stylus2 = (data[0] & 0x20) >> 5;
94 input_report_abs(dev, ABS_X, x);
95 input_report_abs(dev, ABS_Y, y);
96 input_report_abs(dev, ABS_PRESSURE, pressure);
97 input_report_key(dev, BTN_TOUCH, touch);
98 input_report_key(dev, BTN_STYLUS, stylus);
99 input_report_key(dev, BTN_STYLUS2, stylus2);
100 }
101
102 /* event termination */
103 input_sync(dev);
104
105resubmit:
106 status = usb_submit_urb(urb, GFP_ATOMIC);
107 if (status)
108 err("can't resubmit intr, %s-%s/input0, status %d",
109 acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
110}
111
112static int usb_acecad_open(struct input_dev *dev)
113{
114 struct usb_acecad *acecad = input_get_drvdata(dev);
115
116 acecad->irq->dev = acecad->usbdev;
117 if (usb_submit_urb(acecad->irq, GFP_KERNEL))
118 return -EIO;
119
120 return 0;
121}
122
123static void usb_acecad_close(struct input_dev *dev)
124{
125 struct usb_acecad *acecad = input_get_drvdata(dev);
126
127 usb_kill_urb(acecad->irq);
128}
129
130static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
131{
132 struct usb_device *dev = interface_to_usbdev(intf);
133 struct usb_host_interface *interface = intf->cur_altsetting;
134 struct usb_endpoint_descriptor *endpoint;
135 struct usb_acecad *acecad;
136 struct input_dev *input_dev;
137 int pipe, maxp;
138 int err;
139
140 if (interface->desc.bNumEndpoints != 1)
141 return -ENODEV;
142
143 endpoint = &interface->endpoint[0].desc;
144
145 if (!usb_endpoint_is_int_in(endpoint))
146 return -ENODEV;
147
148 pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
149 maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
150
151 acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
152 input_dev = input_allocate_device();
153 if (!acecad || !input_dev) {
154 err = -ENOMEM;
155 goto fail1;
156 }
157
158 acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma);
159 if (!acecad->data) {
160 err= -ENOMEM;
161 goto fail1;
162 }
163
164 acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
165 if (!acecad->irq) {
166 err = -ENOMEM;
167 goto fail2;
168 }
169
170 acecad->usbdev = dev;
171 acecad->input = input_dev;
172
173 if (dev->manufacturer)
174 strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
175
176 if (dev->product) {
177 if (dev->manufacturer)
178 strlcat(acecad->name, " ", sizeof(acecad->name));
179 strlcat(acecad->name, dev->product, sizeof(acecad->name));
180 }
181
182 usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
183 strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
184
185 input_dev->name = acecad->name;
186 input_dev->phys = acecad->phys;
187 usb_to_input_id(dev, &input_dev->id);
188 input_dev->dev.parent = &intf->dev;
189
190 input_set_drvdata(input_dev, acecad);
191
192 input_dev->open = usb_acecad_open;
193 input_dev->close = usb_acecad_close;
194
195 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
196 input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
197 BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
198 BIT_MASK(BTN_STYLUS2);
199
200 switch (id->driver_info) {
201 case 0:
202 input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
203 input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
204 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
205 if (!strlen(acecad->name))
206 snprintf(acecad->name, sizeof(acecad->name),
207 "USB Acecad Flair Tablet %04x:%04x",
208 le16_to_cpu(dev->descriptor.idVendor),
209 le16_to_cpu(dev->descriptor.idProduct));
210 break;
211
212 case 1:
213 input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
214 input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
215 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
216 if (!strlen(acecad->name))
217 snprintf(acecad->name, sizeof(acecad->name),
218 "USB Acecad 302 Tablet %04x:%04x",
219 le16_to_cpu(dev->descriptor.idVendor),
220 le16_to_cpu(dev->descriptor.idProduct));
221 break;
222 }
223
224 usb_fill_int_urb(acecad->irq, dev, pipe,
225 acecad->data, maxp > 8 ? 8 : maxp,
226 usb_acecad_irq, acecad, endpoint->bInterval);
227 acecad->irq->transfer_dma = acecad->data_dma;
228 acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
229
230 err = input_register_device(acecad->input);
231 if (err)
232 goto fail3;
233
234 usb_set_intfdata(intf, acecad);
235
236 return 0;
237
238 fail3: usb_free_urb(acecad->irq);
239 fail2: usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
240 fail1: input_free_device(input_dev);
241 kfree(acecad);
242 return err;
243}
244
245static void usb_acecad_disconnect(struct usb_interface *intf)
246{
247 struct usb_acecad *acecad = usb_get_intfdata(intf);
248
249 usb_set_intfdata(intf, NULL);
250
251 input_unregister_device(acecad->input);
252 usb_free_urb(acecad->irq);
253 usb_free_coherent(acecad->usbdev, 8, acecad->data, acecad->data_dma);
254 kfree(acecad);
255}
256
257static struct usb_device_id usb_acecad_id_table [] = {
258 { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
259 { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 },
260 { }
261};
262
263MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
264
265static struct usb_driver usb_acecad_driver = {
266 .name = "usb_acecad",
267 .probe = usb_acecad_probe,
268 .disconnect = usb_acecad_disconnect,
269 .id_table = usb_acecad_id_table,
270};
271
272static int __init usb_acecad_init(void)
273{
274 int result = usb_register(&usb_acecad_driver);
275 if (result == 0)
276 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
277 DRIVER_DESC "\n");
278 return result;
279}
280
281static void __exit usb_acecad_exit(void)
282{
283 usb_deregister(&usb_acecad_driver);
284}
285
286module_init(usb_acecad_init);
287module_exit(usb_acecad_exit);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (c) 2001-2005 Edouard TISSERANT <edouard.tisserant@wanadoo.fr>
4 * Copyright (c) 2004-2005 Stephane VOLTZ <svoltz@numericable.fr>
5 *
6 * USB Acecad "Acecad Flair" tablet support
7 *
8 * Changelog:
9 * v3.2 - Added sysfs support
10 */
11
12/*
13 */
14
15#include <linux/kernel.h>
16#include <linux/slab.h>
17#include <linux/module.h>
18#include <linux/usb/input.h>
19
20MODULE_AUTHOR("Edouard TISSERANT <edouard.tisserant@wanadoo.fr>");
21MODULE_DESCRIPTION("USB Acecad Flair tablet driver");
22MODULE_LICENSE("GPL");
23
24#define USB_VENDOR_ID_ACECAD 0x0460
25#define USB_DEVICE_ID_FLAIR 0x0004
26#define USB_DEVICE_ID_302 0x0008
27
28struct usb_acecad {
29 char name[128];
30 char phys[64];
31 struct usb_interface *intf;
32 struct input_dev *input;
33 struct urb *irq;
34
35 unsigned char *data;
36 dma_addr_t data_dma;
37};
38
39static void usb_acecad_irq(struct urb *urb)
40{
41 struct usb_acecad *acecad = urb->context;
42 unsigned char *data = acecad->data;
43 struct input_dev *dev = acecad->input;
44 struct usb_interface *intf = acecad->intf;
45 struct usb_device *udev = interface_to_usbdev(intf);
46 int prox, status;
47
48 switch (urb->status) {
49 case 0:
50 /* success */
51 break;
52 case -ECONNRESET:
53 case -ENOENT:
54 case -ESHUTDOWN:
55 /* this urb is terminated, clean up */
56 dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
57 __func__, urb->status);
58 return;
59 default:
60 dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
61 __func__, urb->status);
62 goto resubmit;
63 }
64
65 prox = (data[0] & 0x04) >> 2;
66 input_report_key(dev, BTN_TOOL_PEN, prox);
67
68 if (prox) {
69 int x = data[1] | (data[2] << 8);
70 int y = data[3] | (data[4] << 8);
71 /* Pressure should compute the same way for flair and 302 */
72 int pressure = data[5] | (data[6] << 8);
73 int touch = data[0] & 0x01;
74 int stylus = (data[0] & 0x10) >> 4;
75 int stylus2 = (data[0] & 0x20) >> 5;
76 input_report_abs(dev, ABS_X, x);
77 input_report_abs(dev, ABS_Y, y);
78 input_report_abs(dev, ABS_PRESSURE, pressure);
79 input_report_key(dev, BTN_TOUCH, touch);
80 input_report_key(dev, BTN_STYLUS, stylus);
81 input_report_key(dev, BTN_STYLUS2, stylus2);
82 }
83
84 /* event termination */
85 input_sync(dev);
86
87resubmit:
88 status = usb_submit_urb(urb, GFP_ATOMIC);
89 if (status)
90 dev_err(&intf->dev,
91 "can't resubmit intr, %s-%s/input0, status %d\n",
92 udev->bus->bus_name,
93 udev->devpath, status);
94}
95
96static int usb_acecad_open(struct input_dev *dev)
97{
98 struct usb_acecad *acecad = input_get_drvdata(dev);
99
100 acecad->irq->dev = interface_to_usbdev(acecad->intf);
101 if (usb_submit_urb(acecad->irq, GFP_KERNEL))
102 return -EIO;
103
104 return 0;
105}
106
107static void usb_acecad_close(struct input_dev *dev)
108{
109 struct usb_acecad *acecad = input_get_drvdata(dev);
110
111 usb_kill_urb(acecad->irq);
112}
113
114static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
115{
116 struct usb_device *dev = interface_to_usbdev(intf);
117 struct usb_host_interface *interface = intf->cur_altsetting;
118 struct usb_endpoint_descriptor *endpoint;
119 struct usb_acecad *acecad;
120 struct input_dev *input_dev;
121 int pipe, maxp;
122 int err;
123
124 if (interface->desc.bNumEndpoints != 1)
125 return -ENODEV;
126
127 endpoint = &interface->endpoint[0].desc;
128
129 if (!usb_endpoint_is_int_in(endpoint))
130 return -ENODEV;
131
132 pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
133 maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
134
135 acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
136 input_dev = input_allocate_device();
137 if (!acecad || !input_dev) {
138 err = -ENOMEM;
139 goto fail1;
140 }
141
142 acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma);
143 if (!acecad->data) {
144 err= -ENOMEM;
145 goto fail1;
146 }
147
148 acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
149 if (!acecad->irq) {
150 err = -ENOMEM;
151 goto fail2;
152 }
153
154 acecad->intf = intf;
155 acecad->input = input_dev;
156
157 if (dev->manufacturer)
158 strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
159
160 if (dev->product) {
161 if (dev->manufacturer)
162 strlcat(acecad->name, " ", sizeof(acecad->name));
163 strlcat(acecad->name, dev->product, sizeof(acecad->name));
164 }
165
166 usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
167 strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
168
169 input_dev->name = acecad->name;
170 input_dev->phys = acecad->phys;
171 usb_to_input_id(dev, &input_dev->id);
172 input_dev->dev.parent = &intf->dev;
173
174 input_set_drvdata(input_dev, acecad);
175
176 input_dev->open = usb_acecad_open;
177 input_dev->close = usb_acecad_close;
178
179 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
180 input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
181 BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
182 BIT_MASK(BTN_STYLUS2);
183
184 switch (id->driver_info) {
185 case 0:
186 input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
187 input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
188 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
189 if (!strlen(acecad->name))
190 snprintf(acecad->name, sizeof(acecad->name),
191 "USB Acecad Flair Tablet %04x:%04x",
192 le16_to_cpu(dev->descriptor.idVendor),
193 le16_to_cpu(dev->descriptor.idProduct));
194 break;
195
196 case 1:
197 input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
198 input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
199 input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
200 if (!strlen(acecad->name))
201 snprintf(acecad->name, sizeof(acecad->name),
202 "USB Acecad 302 Tablet %04x:%04x",
203 le16_to_cpu(dev->descriptor.idVendor),
204 le16_to_cpu(dev->descriptor.idProduct));
205 break;
206 }
207
208 usb_fill_int_urb(acecad->irq, dev, pipe,
209 acecad->data, maxp > 8 ? 8 : maxp,
210 usb_acecad_irq, acecad, endpoint->bInterval);
211 acecad->irq->transfer_dma = acecad->data_dma;
212 acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
213
214 err = input_register_device(acecad->input);
215 if (err)
216 goto fail3;
217
218 usb_set_intfdata(intf, acecad);
219
220 return 0;
221
222 fail3: usb_free_urb(acecad->irq);
223 fail2: usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
224 fail1: input_free_device(input_dev);
225 kfree(acecad);
226 return err;
227}
228
229static void usb_acecad_disconnect(struct usb_interface *intf)
230{
231 struct usb_acecad *acecad = usb_get_intfdata(intf);
232 struct usb_device *udev = interface_to_usbdev(intf);
233
234 usb_set_intfdata(intf, NULL);
235
236 input_unregister_device(acecad->input);
237 usb_free_urb(acecad->irq);
238 usb_free_coherent(udev, 8, acecad->data, acecad->data_dma);
239 kfree(acecad);
240}
241
242static const struct usb_device_id usb_acecad_id_table[] = {
243 { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
244 { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 },
245 { }
246};
247
248MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
249
250static struct usb_driver usb_acecad_driver = {
251 .name = "usb_acecad",
252 .probe = usb_acecad_probe,
253 .disconnect = usb_acecad_disconnect,
254 .id_table = usb_acecad_id_table,
255};
256
257module_usb_driver(usb_acecad_driver);