Loading...
1/*
2 *
3 * BRIEF MODULE DESCRIPTION
4 * The Descriptor Based DMA channel manager that first appeared
5 * on the Au1550. I started with dma.c, but I think all that is
6 * left is this initial comment :-)
7 *
8 * Copyright 2004 Embedded Edge, LLC
9 * dan@embeddededge.com
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
19 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
22 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
23 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 *
27 * You should have received a copy of the GNU General Public License along
28 * with this program; if not, write to the Free Software Foundation, Inc.,
29 * 675 Mass Ave, Cambridge, MA 02139, USA.
30 *
31 */
32
33#include <linux/init.h>
34#include <linux/kernel.h>
35#include <linux/slab.h>
36#include <linux/spinlock.h>
37#include <linux/interrupt.h>
38#include <linux/module.h>
39#include <linux/syscore_ops.h>
40#include <asm/mach-au1x00/au1000.h>
41#include <asm/mach-au1x00/au1xxx_dbdma.h>
42
43#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
44
45/*
46 * The Descriptor Based DMA supports up to 16 channels.
47 *
48 * There are 32 devices defined. We keep an internal structure
49 * of devices using these channels, along with additional
50 * information.
51 *
52 * We allocate the descriptors and allow access to them through various
53 * functions. The drivers allocate the data buffers and assign them
54 * to the descriptors.
55 */
56static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
57
58/* I couldn't find a macro that did this... */
59#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
60
61static dbdma_global_t *dbdma_gptr =
62 (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
63static int dbdma_initialized;
64
65static dbdev_tab_t dbdev_tab[] = {
66#ifdef CONFIG_SOC_AU1550
67 /* UARTS */
68 { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
69 { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
70 { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
71 { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
72
73 /* EXT DMA */
74 { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
75 { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
76 { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
77 { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
78
79 /* USB DEV */
80 { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
81 { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
82 { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
83 { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
84 { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
85 { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
86
87 /* PSC 0 */
88 { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
89 { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
90
91 /* PSC 1 */
92 { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
93 { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
94
95 /* PSC 2 */
96 { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
97 { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
98
99 /* PSC 3 */
100 { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
101 { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
102
103 { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
104 { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
105
106 /* MAC 0 */
107 { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
108 { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
109
110 /* MAC 1 */
111 { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
112 { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
113
114#endif /* CONFIG_SOC_AU1550 */
115
116#ifdef CONFIG_SOC_AU1200
117 { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
118 { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
119 { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
120 { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
121
122 { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
123 { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
124
125 { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
126 { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
127 { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
128 { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
129
130 { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
131 { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
132 { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
133 { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
134
135 { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
136 { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
137
138 { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
139 { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
140 { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
141
142 { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
143 { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
144 { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
145
146 { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
147 { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
148 { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
149 { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
150
151 { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
152
153#endif /* CONFIG_SOC_AU1200 */
154
155 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
156 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
157
158 /* Provide 16 user definable device types */
159 { ~0, 0, 0, 0, 0, 0, 0 },
160 { ~0, 0, 0, 0, 0, 0, 0 },
161 { ~0, 0, 0, 0, 0, 0, 0 },
162 { ~0, 0, 0, 0, 0, 0, 0 },
163 { ~0, 0, 0, 0, 0, 0, 0 },
164 { ~0, 0, 0, 0, 0, 0, 0 },
165 { ~0, 0, 0, 0, 0, 0, 0 },
166 { ~0, 0, 0, 0, 0, 0, 0 },
167 { ~0, 0, 0, 0, 0, 0, 0 },
168 { ~0, 0, 0, 0, 0, 0, 0 },
169 { ~0, 0, 0, 0, 0, 0, 0 },
170 { ~0, 0, 0, 0, 0, 0, 0 },
171 { ~0, 0, 0, 0, 0, 0, 0 },
172 { ~0, 0, 0, 0, 0, 0, 0 },
173 { ~0, 0, 0, 0, 0, 0, 0 },
174 { ~0, 0, 0, 0, 0, 0, 0 },
175};
176
177#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
178
179
180static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
181
182static dbdev_tab_t *find_dbdev_id(u32 id)
183{
184 int i;
185 dbdev_tab_t *p;
186 for (i = 0; i < DBDEV_TAB_SIZE; ++i) {
187 p = &dbdev_tab[i];
188 if (p->dev_id == id)
189 return p;
190 }
191 return NULL;
192}
193
194void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
195{
196 return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
197}
198EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
199
200u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
201{
202 u32 ret = 0;
203 dbdev_tab_t *p;
204 static u16 new_id = 0x1000;
205
206 p = find_dbdev_id(~0);
207 if (NULL != p) {
208 memcpy(p, dev, sizeof(dbdev_tab_t));
209 p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
210 ret = p->dev_id;
211 new_id++;
212#if 0
213 printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
214 p->dev_id, p->dev_flags, p->dev_physaddr);
215#endif
216 }
217
218 return ret;
219}
220EXPORT_SYMBOL(au1xxx_ddma_add_device);
221
222void au1xxx_ddma_del_device(u32 devid)
223{
224 dbdev_tab_t *p = find_dbdev_id(devid);
225
226 if (p != NULL) {
227 memset(p, 0, sizeof(dbdev_tab_t));
228 p->dev_id = ~0;
229 }
230}
231EXPORT_SYMBOL(au1xxx_ddma_del_device);
232
233/* Allocate a channel and return a non-zero descriptor if successful. */
234u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
235 void (*callback)(int, void *), void *callparam)
236{
237 unsigned long flags;
238 u32 used, chan;
239 u32 dcp;
240 int i;
241 dbdev_tab_t *stp, *dtp;
242 chan_tab_t *ctp;
243 au1x_dma_chan_t *cp;
244
245 /*
246 * We do the intialization on the first channel allocation.
247 * We have to wait because of the interrupt handler initialization
248 * which can't be done successfully during board set up.
249 */
250 if (!dbdma_initialized)
251 return 0;
252
253 stp = find_dbdev_id(srcid);
254 if (stp == NULL)
255 return 0;
256 dtp = find_dbdev_id(destid);
257 if (dtp == NULL)
258 return 0;
259
260 used = 0;
261
262 /* Check to see if we can get both channels. */
263 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
264 if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
265 (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
266 /* Got source */
267 stp->dev_flags |= DEV_FLAGS_INUSE;
268 if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
269 (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
270 /* Got destination */
271 dtp->dev_flags |= DEV_FLAGS_INUSE;
272 } else {
273 /* Can't get dest. Release src. */
274 stp->dev_flags &= ~DEV_FLAGS_INUSE;
275 used++;
276 }
277 } else
278 used++;
279 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
280
281 if (used)
282 return 0;
283
284 /* Let's see if we can allocate a channel for it. */
285 ctp = NULL;
286 chan = 0;
287 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
288 for (i = 0; i < NUM_DBDMA_CHANS; i++)
289 if (chan_tab_ptr[i] == NULL) {
290 /*
291 * If kmalloc fails, it is caught below same
292 * as a channel not available.
293 */
294 ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
295 chan_tab_ptr[i] = ctp;
296 break;
297 }
298 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
299
300 if (ctp != NULL) {
301 memset(ctp, 0, sizeof(chan_tab_t));
302 ctp->chan_index = chan = i;
303 dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
304 dcp += (0x0100 * chan);
305 ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
306 cp = (au1x_dma_chan_t *)dcp;
307 ctp->chan_src = stp;
308 ctp->chan_dest = dtp;
309 ctp->chan_callback = callback;
310 ctp->chan_callparam = callparam;
311
312 /* Initialize channel configuration. */
313 i = 0;
314 if (stp->dev_intlevel)
315 i |= DDMA_CFG_SED;
316 if (stp->dev_intpolarity)
317 i |= DDMA_CFG_SP;
318 if (dtp->dev_intlevel)
319 i |= DDMA_CFG_DED;
320 if (dtp->dev_intpolarity)
321 i |= DDMA_CFG_DP;
322 if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
323 (dtp->dev_flags & DEV_FLAGS_SYNC))
324 i |= DDMA_CFG_SYNC;
325 cp->ddma_cfg = i;
326 au_sync();
327
328 /*
329 * Return a non-zero value that can be used to find the channel
330 * information in subsequent operations.
331 */
332 return (u32)(&chan_tab_ptr[chan]);
333 }
334
335 /* Release devices */
336 stp->dev_flags &= ~DEV_FLAGS_INUSE;
337 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
338
339 return 0;
340}
341EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
342
343/*
344 * Set the device width if source or destination is a FIFO.
345 * Should be 8, 16, or 32 bits.
346 */
347u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
348{
349 u32 rv;
350 chan_tab_t *ctp;
351 dbdev_tab_t *stp, *dtp;
352
353 ctp = *((chan_tab_t **)chanid);
354 stp = ctp->chan_src;
355 dtp = ctp->chan_dest;
356 rv = 0;
357
358 if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */
359 rv = stp->dev_devwidth;
360 stp->dev_devwidth = bits;
361 }
362 if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */
363 rv = dtp->dev_devwidth;
364 dtp->dev_devwidth = bits;
365 }
366
367 return rv;
368}
369EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
370
371/* Allocate a descriptor ring, initializing as much as possible. */
372u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
373{
374 int i;
375 u32 desc_base, srcid, destid;
376 u32 cmd0, cmd1, src1, dest1;
377 u32 src0, dest0;
378 chan_tab_t *ctp;
379 dbdev_tab_t *stp, *dtp;
380 au1x_ddma_desc_t *dp;
381
382 /*
383 * I guess we could check this to be within the
384 * range of the table......
385 */
386 ctp = *((chan_tab_t **)chanid);
387 stp = ctp->chan_src;
388 dtp = ctp->chan_dest;
389
390 /*
391 * The descriptors must be 32-byte aligned. There is a
392 * possibility the allocation will give us such an address,
393 * and if we try that first we are likely to not waste larger
394 * slabs of memory.
395 */
396 desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
397 GFP_KERNEL|GFP_DMA);
398 if (desc_base == 0)
399 return 0;
400
401 if (desc_base & 0x1f) {
402 /*
403 * Lost....do it again, allocate extra, and round
404 * the address base.
405 */
406 kfree((const void *)desc_base);
407 i = entries * sizeof(au1x_ddma_desc_t);
408 i += (sizeof(au1x_ddma_desc_t) - 1);
409 desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
410 if (desc_base == 0)
411 return 0;
412
413 ctp->cdb_membase = desc_base;
414 desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
415 } else
416 ctp->cdb_membase = desc_base;
417
418 dp = (au1x_ddma_desc_t *)desc_base;
419
420 /* Keep track of the base descriptor. */
421 ctp->chan_desc_base = dp;
422
423 /* Initialize the rings with as much information as we know. */
424 srcid = stp->dev_id;
425 destid = dtp->dev_id;
426
427 cmd0 = cmd1 = src1 = dest1 = 0;
428 src0 = dest0 = 0;
429
430 cmd0 |= DSCR_CMD0_SID(srcid);
431 cmd0 |= DSCR_CMD0_DID(destid);
432 cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
433 cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
434
435 /* Is it mem to mem transfer? */
436 if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
437 (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
438 ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
439 (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
440 cmd0 |= DSCR_CMD0_MEM;
441
442 switch (stp->dev_devwidth) {
443 case 8:
444 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE);
445 break;
446 case 16:
447 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD);
448 break;
449 case 32:
450 default:
451 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD);
452 break;
453 }
454
455 switch (dtp->dev_devwidth) {
456 case 8:
457 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE);
458 break;
459 case 16:
460 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD);
461 break;
462 case 32:
463 default:
464 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD);
465 break;
466 }
467
468 /*
469 * If the device is marked as an in/out FIFO, ensure it is
470 * set non-coherent.
471 */
472 if (stp->dev_flags & DEV_FLAGS_IN)
473 cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
474 if (dtp->dev_flags & DEV_FLAGS_OUT)
475 cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
476
477 /*
478 * Set up source1. For now, assume no stride and increment.
479 * A channel attribute update can change this later.
480 */
481 switch (stp->dev_tsize) {
482 case 1:
483 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1);
484 break;
485 case 2:
486 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2);
487 break;
488 case 4:
489 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4);
490 break;
491 case 8:
492 default:
493 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8);
494 break;
495 }
496
497 /* If source input is FIFO, set static address. */
498 if (stp->dev_flags & DEV_FLAGS_IN) {
499 if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
500 src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
501 else
502 src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
503 }
504
505 if (stp->dev_physaddr)
506 src0 = stp->dev_physaddr;
507
508 /*
509 * Set up dest1. For now, assume no stride and increment.
510 * A channel attribute update can change this later.
511 */
512 switch (dtp->dev_tsize) {
513 case 1:
514 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1);
515 break;
516 case 2:
517 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2);
518 break;
519 case 4:
520 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4);
521 break;
522 case 8:
523 default:
524 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8);
525 break;
526 }
527
528 /* If destination output is FIFO, set static address. */
529 if (dtp->dev_flags & DEV_FLAGS_OUT) {
530 if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
531 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
532 else
533 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
534 }
535
536 if (dtp->dev_physaddr)
537 dest0 = dtp->dev_physaddr;
538
539#if 0
540 printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
541 "source1:%x dest0:%x dest1:%x\n",
542 dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
543 src1, dest0, dest1);
544#endif
545 for (i = 0; i < entries; i++) {
546 dp->dscr_cmd0 = cmd0;
547 dp->dscr_cmd1 = cmd1;
548 dp->dscr_source0 = src0;
549 dp->dscr_source1 = src1;
550 dp->dscr_dest0 = dest0;
551 dp->dscr_dest1 = dest1;
552 dp->dscr_stat = 0;
553 dp->sw_context = 0;
554 dp->sw_status = 0;
555 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
556 dp++;
557 }
558
559 /* Make last descrptor point to the first. */
560 dp--;
561 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
562 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
563
564 return (u32)ctp->chan_desc_base;
565}
566EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
567
568/*
569 * Put a source buffer into the DMA ring.
570 * This updates the source pointer and byte count. Normally used
571 * for memory to fifo transfers.
572 */
573u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
574{
575 chan_tab_t *ctp;
576 au1x_ddma_desc_t *dp;
577
578 /*
579 * I guess we could check this to be within the
580 * range of the table......
581 */
582 ctp = *(chan_tab_t **)chanid;
583
584 /*
585 * We should have multiple callers for a particular channel,
586 * an interrupt doesn't affect this pointer nor the descriptor,
587 * so no locking should be needed.
588 */
589 dp = ctp->put_ptr;
590
591 /*
592 * If the descriptor is valid, we are way ahead of the DMA
593 * engine, so just return an error condition.
594 */
595 if (dp->dscr_cmd0 & DSCR_CMD0_V)
596 return 0;
597
598 /* Load up buffer address and byte count. */
599 dp->dscr_source0 = buf & ~0UL;
600 dp->dscr_cmd1 = nbytes;
601 /* Check flags */
602 if (flags & DDMA_FLAGS_IE)
603 dp->dscr_cmd0 |= DSCR_CMD0_IE;
604 if (flags & DDMA_FLAGS_NOIE)
605 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
606
607 /*
608 * There is an errata on the Au1200/Au1550 parts that could result
609 * in "stale" data being DMA'ed. It has to do with the snoop logic on
610 * the cache eviction buffer. DMA_NONCOHERENT is on by default for
611 * these parts. If it is fixed in the future, these dma_cache_inv will
612 * just be nothing more than empty macros. See io.h.
613 */
614 dma_cache_wback_inv((unsigned long)buf, nbytes);
615 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
616 au_sync();
617 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
618 ctp->chan_ptr->ddma_dbell = 0;
619
620 /* Get next descriptor pointer. */
621 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
622
623 /* Return something non-zero. */
624 return nbytes;
625}
626EXPORT_SYMBOL(au1xxx_dbdma_put_source);
627
628/* Put a destination buffer into the DMA ring.
629 * This updates the destination pointer and byte count. Normally used
630 * to place an empty buffer into the ring for fifo to memory transfers.
631 */
632u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
633{
634 chan_tab_t *ctp;
635 au1x_ddma_desc_t *dp;
636
637 /* I guess we could check this to be within the
638 * range of the table......
639 */
640 ctp = *((chan_tab_t **)chanid);
641
642 /* We should have multiple callers for a particular channel,
643 * an interrupt doesn't affect this pointer nor the descriptor,
644 * so no locking should be needed.
645 */
646 dp = ctp->put_ptr;
647
648 /* If the descriptor is valid, we are way ahead of the DMA
649 * engine, so just return an error condition.
650 */
651 if (dp->dscr_cmd0 & DSCR_CMD0_V)
652 return 0;
653
654 /* Load up buffer address and byte count */
655
656 /* Check flags */
657 if (flags & DDMA_FLAGS_IE)
658 dp->dscr_cmd0 |= DSCR_CMD0_IE;
659 if (flags & DDMA_FLAGS_NOIE)
660 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
661
662 dp->dscr_dest0 = buf & ~0UL;
663 dp->dscr_cmd1 = nbytes;
664#if 0
665 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
666 dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
667 dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
668#endif
669 /*
670 * There is an errata on the Au1200/Au1550 parts that could result in
671 * "stale" data being DMA'ed. It has to do with the snoop logic on the
672 * cache eviction buffer. DMA_NONCOHERENT is on by default for these
673 * parts. If it is fixed in the future, these dma_cache_inv will just
674 * be nothing more than empty macros. See io.h.
675 */
676 dma_cache_inv((unsigned long)buf, nbytes);
677 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
678 au_sync();
679 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
680 ctp->chan_ptr->ddma_dbell = 0;
681
682 /* Get next descriptor pointer. */
683 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
684
685 /* Return something non-zero. */
686 return nbytes;
687}
688EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
689
690/*
691 * Get a destination buffer into the DMA ring.
692 * Normally used to get a full buffer from the ring during fifo
693 * to memory transfers. This does not set the valid bit, you will
694 * have to put another destination buffer to keep the DMA going.
695 */
696u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
697{
698 chan_tab_t *ctp;
699 au1x_ddma_desc_t *dp;
700 u32 rv;
701
702 /*
703 * I guess we could check this to be within the
704 * range of the table......
705 */
706 ctp = *((chan_tab_t **)chanid);
707
708 /*
709 * We should have multiple callers for a particular channel,
710 * an interrupt doesn't affect this pointer nor the descriptor,
711 * so no locking should be needed.
712 */
713 dp = ctp->get_ptr;
714
715 /*
716 * If the descriptor is valid, we are way ahead of the DMA
717 * engine, so just return an error condition.
718 */
719 if (dp->dscr_cmd0 & DSCR_CMD0_V)
720 return 0;
721
722 /* Return buffer address and byte count. */
723 *buf = (void *)(phys_to_virt(dp->dscr_dest0));
724 *nbytes = dp->dscr_cmd1;
725 rv = dp->dscr_stat;
726
727 /* Get next descriptor pointer. */
728 ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
729
730 /* Return something non-zero. */
731 return rv;
732}
733EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
734
735void au1xxx_dbdma_stop(u32 chanid)
736{
737 chan_tab_t *ctp;
738 au1x_dma_chan_t *cp;
739 int halt_timeout = 0;
740
741 ctp = *((chan_tab_t **)chanid);
742
743 cp = ctp->chan_ptr;
744 cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */
745 au_sync();
746 while (!(cp->ddma_stat & DDMA_STAT_H)) {
747 udelay(1);
748 halt_timeout++;
749 if (halt_timeout > 100) {
750 printk(KERN_WARNING "warning: DMA channel won't halt\n");
751 break;
752 }
753 }
754 /* clear current desc valid and doorbell */
755 cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
756 au_sync();
757}
758EXPORT_SYMBOL(au1xxx_dbdma_stop);
759
760/*
761 * Start using the current descriptor pointer. If the DBDMA encounters
762 * a non-valid descriptor, it will stop. In this case, we can just
763 * continue by adding a buffer to the list and starting again.
764 */
765void au1xxx_dbdma_start(u32 chanid)
766{
767 chan_tab_t *ctp;
768 au1x_dma_chan_t *cp;
769
770 ctp = *((chan_tab_t **)chanid);
771 cp = ctp->chan_ptr;
772 cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
773 cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
774 au_sync();
775 cp->ddma_dbell = 0;
776 au_sync();
777}
778EXPORT_SYMBOL(au1xxx_dbdma_start);
779
780void au1xxx_dbdma_reset(u32 chanid)
781{
782 chan_tab_t *ctp;
783 au1x_ddma_desc_t *dp;
784
785 au1xxx_dbdma_stop(chanid);
786
787 ctp = *((chan_tab_t **)chanid);
788 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
789
790 /* Run through the descriptors and reset the valid indicator. */
791 dp = ctp->chan_desc_base;
792
793 do {
794 dp->dscr_cmd0 &= ~DSCR_CMD0_V;
795 /*
796 * Reset our software status -- this is used to determine
797 * if a descriptor is in use by upper level software. Since
798 * posting can reset 'V' bit.
799 */
800 dp->sw_status = 0;
801 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
802 } while (dp != ctp->chan_desc_base);
803}
804EXPORT_SYMBOL(au1xxx_dbdma_reset);
805
806u32 au1xxx_get_dma_residue(u32 chanid)
807{
808 chan_tab_t *ctp;
809 au1x_dma_chan_t *cp;
810 u32 rv;
811
812 ctp = *((chan_tab_t **)chanid);
813 cp = ctp->chan_ptr;
814
815 /* This is only valid if the channel is stopped. */
816 rv = cp->ddma_bytecnt;
817 au_sync();
818
819 return rv;
820}
821EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
822
823void au1xxx_dbdma_chan_free(u32 chanid)
824{
825 chan_tab_t *ctp;
826 dbdev_tab_t *stp, *dtp;
827
828 ctp = *((chan_tab_t **)chanid);
829 stp = ctp->chan_src;
830 dtp = ctp->chan_dest;
831
832 au1xxx_dbdma_stop(chanid);
833
834 kfree((void *)ctp->cdb_membase);
835
836 stp->dev_flags &= ~DEV_FLAGS_INUSE;
837 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
838 chan_tab_ptr[ctp->chan_index] = NULL;
839
840 kfree(ctp);
841}
842EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
843
844static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
845{
846 u32 intstat;
847 u32 chan_index;
848 chan_tab_t *ctp;
849 au1x_ddma_desc_t *dp;
850 au1x_dma_chan_t *cp;
851
852 intstat = dbdma_gptr->ddma_intstat;
853 au_sync();
854 chan_index = __ffs(intstat);
855
856 ctp = chan_tab_ptr[chan_index];
857 cp = ctp->chan_ptr;
858 dp = ctp->cur_ptr;
859
860 /* Reset interrupt. */
861 cp->ddma_irq = 0;
862 au_sync();
863
864 if (ctp->chan_callback)
865 ctp->chan_callback(irq, ctp->chan_callparam);
866
867 ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
868 return IRQ_RETVAL(1);
869}
870
871void au1xxx_dbdma_dump(u32 chanid)
872{
873 chan_tab_t *ctp;
874 au1x_ddma_desc_t *dp;
875 dbdev_tab_t *stp, *dtp;
876 au1x_dma_chan_t *cp;
877 u32 i = 0;
878
879 ctp = *((chan_tab_t **)chanid);
880 stp = ctp->chan_src;
881 dtp = ctp->chan_dest;
882 cp = ctp->chan_ptr;
883
884 printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
885 (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
886 dtp - dbdev_tab);
887 printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
888 (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
889 (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
890
891 printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
892 printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
893 cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
894 printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
895 cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
896 cp->ddma_bytecnt);
897
898 /* Run through the descriptors */
899 dp = ctp->chan_desc_base;
900
901 do {
902 printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
903 i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
904 printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
905 dp->dscr_source0, dp->dscr_source1,
906 dp->dscr_dest0, dp->dscr_dest1);
907 printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
908 dp->dscr_stat, dp->dscr_nxtptr);
909 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
910 } while (dp != ctp->chan_desc_base);
911}
912
913/* Put a descriptor into the DMA ring.
914 * This updates the source/destination pointers and byte count.
915 */
916u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
917{
918 chan_tab_t *ctp;
919 au1x_ddma_desc_t *dp;
920 u32 nbytes = 0;
921
922 /*
923 * I guess we could check this to be within the
924 * range of the table......
925 */
926 ctp = *((chan_tab_t **)chanid);
927
928 /*
929 * We should have multiple callers for a particular channel,
930 * an interrupt doesn't affect this pointer nor the descriptor,
931 * so no locking should be needed.
932 */
933 dp = ctp->put_ptr;
934
935 /*
936 * If the descriptor is valid, we are way ahead of the DMA
937 * engine, so just return an error condition.
938 */
939 if (dp->dscr_cmd0 & DSCR_CMD0_V)
940 return 0;
941
942 /* Load up buffer addresses and byte count. */
943 dp->dscr_dest0 = dscr->dscr_dest0;
944 dp->dscr_source0 = dscr->dscr_source0;
945 dp->dscr_dest1 = dscr->dscr_dest1;
946 dp->dscr_source1 = dscr->dscr_source1;
947 dp->dscr_cmd1 = dscr->dscr_cmd1;
948 nbytes = dscr->dscr_cmd1;
949 /* Allow the caller to specifiy if an interrupt is generated */
950 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
951 dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
952 ctp->chan_ptr->ddma_dbell = 0;
953
954 /* Get next descriptor pointer. */
955 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
956
957 /* Return something non-zero. */
958 return nbytes;
959}
960
961
962static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
963
964static int alchemy_dbdma_suspend(void)
965{
966 int i;
967 void __iomem *addr;
968
969 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
970 alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
971 alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
972 alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
973 alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
974
975 /* save channel configurations */
976 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
977 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
978 alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
979 alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
980 alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
981 alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
982 alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
983 alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
984
985 /* halt channel */
986 __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
987 wmb();
988 while (!(__raw_readl(addr + 0x14) & 1))
989 wmb();
990
991 addr += 0x100; /* next channel base */
992 }
993 /* disable channel interrupts */
994 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
995 __raw_writel(0, addr + 0x0c);
996 wmb();
997
998 return 0;
999}
1000
1001static void alchemy_dbdma_resume(void)
1002{
1003 int i;
1004 void __iomem *addr;
1005
1006 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1007 __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
1008 __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
1009 __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
1010 __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
1011
1012 /* restore channel configurations */
1013 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
1014 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
1015 __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
1016 __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
1017 __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
1018 __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
1019 __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
1020 __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
1021 wmb();
1022 addr += 0x100; /* next channel base */
1023 }
1024}
1025
1026static struct syscore_ops alchemy_dbdma_syscore_ops = {
1027 .suspend = alchemy_dbdma_suspend,
1028 .resume = alchemy_dbdma_resume,
1029};
1030
1031static int __init au1xxx_dbdma_init(void)
1032{
1033 int irq_nr, ret;
1034
1035 dbdma_gptr->ddma_config = 0;
1036 dbdma_gptr->ddma_throttle = 0;
1037 dbdma_gptr->ddma_inten = 0xffff;
1038 au_sync();
1039
1040 switch (alchemy_get_cputype()) {
1041 case ALCHEMY_CPU_AU1550:
1042 irq_nr = AU1550_DDMA_INT;
1043 break;
1044 case ALCHEMY_CPU_AU1200:
1045 irq_nr = AU1200_DDMA_INT;
1046 break;
1047 default:
1048 return -ENODEV;
1049 }
1050
1051 ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
1052 "Au1xxx dbdma", (void *)dbdma_gptr);
1053 if (ret)
1054 printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
1055 else {
1056 dbdma_initialized = 1;
1057 printk(KERN_INFO "Alchemy DBDMA initialized\n");
1058 register_syscore_ops(&alchemy_dbdma_syscore_ops);
1059 }
1060
1061 return ret;
1062}
1063subsys_initcall(au1xxx_dbdma_init);
1064
1065#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
1/*
2 *
3 * BRIEF MODULE DESCRIPTION
4 * The Descriptor Based DMA channel manager that first appeared
5 * on the Au1550. I started with dma.c, but I think all that is
6 * left is this initial comment :-)
7 *
8 * Copyright 2004 Embedded Edge, LLC
9 * dan@embeddededge.com
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
15 *
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
19 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
22 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
23 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 *
27 * You should have received a copy of the GNU General Public License along
28 * with this program; if not, write to the Free Software Foundation, Inc.,
29 * 675 Mass Ave, Cambridge, MA 02139, USA.
30 *
31 */
32
33#include <linux/init.h>
34#include <linux/kernel.h>
35#include <linux/slab.h>
36#include <linux/spinlock.h>
37#include <linux/interrupt.h>
38#include <linux/export.h>
39#include <linux/syscore_ops.h>
40#include <asm/mach-au1x00/au1000.h>
41#include <asm/mach-au1x00/au1xxx_dbdma.h>
42
43/*
44 * The Descriptor Based DMA supports up to 16 channels.
45 *
46 * There are 32 devices defined. We keep an internal structure
47 * of devices using these channels, along with additional
48 * information.
49 *
50 * We allocate the descriptors and allow access to them through various
51 * functions. The drivers allocate the data buffers and assign them
52 * to the descriptors.
53 */
54static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
55
56/* I couldn't find a macro that did this... */
57#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
58
59static dbdma_global_t *dbdma_gptr =
60 (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
61static int dbdma_initialized;
62
63static dbdev_tab_t *dbdev_tab;
64
65static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
66 /* UARTS */
67 { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
68 { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
69 { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
70 { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
71
72 /* EXT DMA */
73 { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
74 { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
75 { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
76 { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
77
78 /* USB DEV */
79 { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
80 { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
81 { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
82 { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
83 { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
84 { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
85
86 /* PSCs */
87 { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
88 { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
89 { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
90 { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
91 { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
92 { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
93 { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
94 { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
95
96 { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
97 { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
98
99 /* MAC 0 */
100 { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
101 { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
102
103 /* MAC 1 */
104 { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
105 { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
106
107 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
108 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
109};
110
111static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
112 { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
113 { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
114 { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
115 { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
116
117 { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
118 { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
119
120 { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
121 { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
122 { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
123 { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
124
125 { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
126 { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
127 { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
128 { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
129
130 { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
131 { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
132
133 { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
134 { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
135 { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
136 { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
137 { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
138 { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
139
140 { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
141 { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
142 { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
143 { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
144
145 { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
146
147 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
148 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
149};
150
151static dbdev_tab_t au1300_dbdev_tab[] __initdata = {
152 { AU1300_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x10100004, 0, 0 },
153 { AU1300_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x10100000, 0, 0 },
154 { AU1300_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x10101004, 0, 0 },
155 { AU1300_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x10101000, 0, 0 },
156 { AU1300_DSCR_CMD0_UART2_TX, DEV_FLAGS_OUT, 0, 8, 0x10102004, 0, 0 },
157 { AU1300_DSCR_CMD0_UART2_RX, DEV_FLAGS_IN, 0, 8, 0x10102000, 0, 0 },
158 { AU1300_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x10103004, 0, 0 },
159 { AU1300_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x10103000, 0, 0 },
160
161 { AU1300_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
162 { AU1300_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
163 { AU1300_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 8, 8, 0x10601000, 0, 0 },
164 { AU1300_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 8, 8, 0x10601004, 0, 0 },
165
166 { AU1300_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
167 { AU1300_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
168
169 { AU1300_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0001c, 0, 0 },
170 { AU1300_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x10a0001c, 0, 0 },
171 { AU1300_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0101c, 0, 0 },
172 { AU1300_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x10a0101c, 0, 0 },
173 { AU1300_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0201c, 0, 0 },
174 { AU1300_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 16, 0x10a0201c, 0, 0 },
175 { AU1300_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 16, 0x10a0301c, 0, 0 },
176 { AU1300_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 16, 0x10a0301c, 0, 0 },
177
178 { AU1300_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
179 { AU1300_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
180
181 { AU1300_DSCR_CMD0_SDMS_TX2, DEV_FLAGS_OUT, 4, 8, 0x10602000, 0, 0 },
182 { AU1300_DSCR_CMD0_SDMS_RX2, DEV_FLAGS_IN, 4, 8, 0x10602004, 0, 0 },
183
184 { AU1300_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
185
186 { AU1300_DSCR_CMD0_UDMA, DEV_FLAGS_ANYUSE, 0, 32, 0x14001810, 0, 0 },
187
188 { AU1300_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
189 { AU1300_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
190
191 { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
192 { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
193};
194
195/* 32 predefined plus 32 custom */
196#define DBDEV_TAB_SIZE 64
197
198static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
199
200static dbdev_tab_t *find_dbdev_id(u32 id)
201{
202 int i;
203 dbdev_tab_t *p;
204 for (i = 0; i < DBDEV_TAB_SIZE; ++i) {
205 p = &dbdev_tab[i];
206 if (p->dev_id == id)
207 return p;
208 }
209 return NULL;
210}
211
212void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
213{
214 return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
215}
216EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
217
218u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
219{
220 u32 ret = 0;
221 dbdev_tab_t *p;
222 static u16 new_id = 0x1000;
223
224 p = find_dbdev_id(~0);
225 if (NULL != p) {
226 memcpy(p, dev, sizeof(dbdev_tab_t));
227 p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
228 ret = p->dev_id;
229 new_id++;
230#if 0
231 printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
232 p->dev_id, p->dev_flags, p->dev_physaddr);
233#endif
234 }
235
236 return ret;
237}
238EXPORT_SYMBOL(au1xxx_ddma_add_device);
239
240void au1xxx_ddma_del_device(u32 devid)
241{
242 dbdev_tab_t *p = find_dbdev_id(devid);
243
244 if (p != NULL) {
245 memset(p, 0, sizeof(dbdev_tab_t));
246 p->dev_id = ~0;
247 }
248}
249EXPORT_SYMBOL(au1xxx_ddma_del_device);
250
251/* Allocate a channel and return a non-zero descriptor if successful. */
252u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
253 void (*callback)(int, void *), void *callparam)
254{
255 unsigned long flags;
256 u32 used, chan;
257 u32 dcp;
258 int i;
259 dbdev_tab_t *stp, *dtp;
260 chan_tab_t *ctp;
261 au1x_dma_chan_t *cp;
262
263 /*
264 * We do the initialization on the first channel allocation.
265 * We have to wait because of the interrupt handler initialization
266 * which can't be done successfully during board set up.
267 */
268 if (!dbdma_initialized)
269 return 0;
270
271 stp = find_dbdev_id(srcid);
272 if (stp == NULL)
273 return 0;
274 dtp = find_dbdev_id(destid);
275 if (dtp == NULL)
276 return 0;
277
278 used = 0;
279
280 /* Check to see if we can get both channels. */
281 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
282 if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
283 (stp->dev_flags & DEV_FLAGS_ANYUSE)) {
284 /* Got source */
285 stp->dev_flags |= DEV_FLAGS_INUSE;
286 if (!(dtp->dev_flags & DEV_FLAGS_INUSE) ||
287 (dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
288 /* Got destination */
289 dtp->dev_flags |= DEV_FLAGS_INUSE;
290 } else {
291 /* Can't get dest. Release src. */
292 stp->dev_flags &= ~DEV_FLAGS_INUSE;
293 used++;
294 }
295 } else
296 used++;
297 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
298
299 if (used)
300 return 0;
301
302 /* Let's see if we can allocate a channel for it. */
303 ctp = NULL;
304 chan = 0;
305 spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
306 for (i = 0; i < NUM_DBDMA_CHANS; i++)
307 if (chan_tab_ptr[i] == NULL) {
308 /*
309 * If kmalloc fails, it is caught below same
310 * as a channel not available.
311 */
312 ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
313 chan_tab_ptr[i] = ctp;
314 break;
315 }
316 spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
317
318 if (ctp != NULL) {
319 memset(ctp, 0, sizeof(chan_tab_t));
320 ctp->chan_index = chan = i;
321 dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
322 dcp += (0x0100 * chan);
323 ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
324 cp = (au1x_dma_chan_t *)dcp;
325 ctp->chan_src = stp;
326 ctp->chan_dest = dtp;
327 ctp->chan_callback = callback;
328 ctp->chan_callparam = callparam;
329
330 /* Initialize channel configuration. */
331 i = 0;
332 if (stp->dev_intlevel)
333 i |= DDMA_CFG_SED;
334 if (stp->dev_intpolarity)
335 i |= DDMA_CFG_SP;
336 if (dtp->dev_intlevel)
337 i |= DDMA_CFG_DED;
338 if (dtp->dev_intpolarity)
339 i |= DDMA_CFG_DP;
340 if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
341 (dtp->dev_flags & DEV_FLAGS_SYNC))
342 i |= DDMA_CFG_SYNC;
343 cp->ddma_cfg = i;
344 wmb(); /* drain writebuffer */
345
346 /*
347 * Return a non-zero value that can be used to find the channel
348 * information in subsequent operations.
349 */
350 return (u32)(&chan_tab_ptr[chan]);
351 }
352
353 /* Release devices */
354 stp->dev_flags &= ~DEV_FLAGS_INUSE;
355 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
356
357 return 0;
358}
359EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
360
361/*
362 * Set the device width if source or destination is a FIFO.
363 * Should be 8, 16, or 32 bits.
364 */
365u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
366{
367 u32 rv;
368 chan_tab_t *ctp;
369 dbdev_tab_t *stp, *dtp;
370
371 ctp = *((chan_tab_t **)chanid);
372 stp = ctp->chan_src;
373 dtp = ctp->chan_dest;
374 rv = 0;
375
376 if (stp->dev_flags & DEV_FLAGS_IN) { /* Source in fifo */
377 rv = stp->dev_devwidth;
378 stp->dev_devwidth = bits;
379 }
380 if (dtp->dev_flags & DEV_FLAGS_OUT) { /* Destination out fifo */
381 rv = dtp->dev_devwidth;
382 dtp->dev_devwidth = bits;
383 }
384
385 return rv;
386}
387EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
388
389/* Allocate a descriptor ring, initializing as much as possible. */
390u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
391{
392 int i;
393 u32 desc_base, srcid, destid;
394 u32 cmd0, cmd1, src1, dest1;
395 u32 src0, dest0;
396 chan_tab_t *ctp;
397 dbdev_tab_t *stp, *dtp;
398 au1x_ddma_desc_t *dp;
399
400 /*
401 * I guess we could check this to be within the
402 * range of the table......
403 */
404 ctp = *((chan_tab_t **)chanid);
405 stp = ctp->chan_src;
406 dtp = ctp->chan_dest;
407
408 /*
409 * The descriptors must be 32-byte aligned. There is a
410 * possibility the allocation will give us such an address,
411 * and if we try that first we are likely to not waste larger
412 * slabs of memory.
413 */
414 desc_base = (u32)kmalloc_array(entries, sizeof(au1x_ddma_desc_t),
415 GFP_KERNEL|GFP_DMA);
416 if (desc_base == 0)
417 return 0;
418
419 if (desc_base & 0x1f) {
420 /*
421 * Lost....do it again, allocate extra, and round
422 * the address base.
423 */
424 kfree((const void *)desc_base);
425 i = entries * sizeof(au1x_ddma_desc_t);
426 i += (sizeof(au1x_ddma_desc_t) - 1);
427 desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
428 if (desc_base == 0)
429 return 0;
430
431 ctp->cdb_membase = desc_base;
432 desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
433 } else
434 ctp->cdb_membase = desc_base;
435
436 dp = (au1x_ddma_desc_t *)desc_base;
437
438 /* Keep track of the base descriptor. */
439 ctp->chan_desc_base = dp;
440
441 /* Initialize the rings with as much information as we know. */
442 srcid = stp->dev_id;
443 destid = dtp->dev_id;
444
445 cmd0 = cmd1 = src1 = dest1 = 0;
446 src0 = dest0 = 0;
447
448 cmd0 |= DSCR_CMD0_SID(srcid);
449 cmd0 |= DSCR_CMD0_DID(destid);
450 cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
451 cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
452
453 /* Is it mem to mem transfer? */
454 if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
455 (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
456 ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
457 (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
458 cmd0 |= DSCR_CMD0_MEM;
459
460 switch (stp->dev_devwidth) {
461 case 8:
462 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_BYTE);
463 break;
464 case 16:
465 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_HALFWORD);
466 break;
467 case 32:
468 default:
469 cmd0 |= DSCR_CMD0_SW(DSCR_CMD0_WORD);
470 break;
471 }
472
473 switch (dtp->dev_devwidth) {
474 case 8:
475 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_BYTE);
476 break;
477 case 16:
478 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_HALFWORD);
479 break;
480 case 32:
481 default:
482 cmd0 |= DSCR_CMD0_DW(DSCR_CMD0_WORD);
483 break;
484 }
485
486 /*
487 * If the device is marked as an in/out FIFO, ensure it is
488 * set non-coherent.
489 */
490 if (stp->dev_flags & DEV_FLAGS_IN)
491 cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
492 if (dtp->dev_flags & DEV_FLAGS_OUT)
493 cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
494
495 /*
496 * Set up source1. For now, assume no stride and increment.
497 * A channel attribute update can change this later.
498 */
499 switch (stp->dev_tsize) {
500 case 1:
501 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE1);
502 break;
503 case 2:
504 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE2);
505 break;
506 case 4:
507 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE4);
508 break;
509 case 8:
510 default:
511 src1 |= DSCR_SRC1_STS(DSCR_xTS_SIZE8);
512 break;
513 }
514
515 /* If source input is FIFO, set static address. */
516 if (stp->dev_flags & DEV_FLAGS_IN) {
517 if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
518 src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
519 else
520 src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
521 }
522
523 if (stp->dev_physaddr)
524 src0 = stp->dev_physaddr;
525
526 /*
527 * Set up dest1. For now, assume no stride and increment.
528 * A channel attribute update can change this later.
529 */
530 switch (dtp->dev_tsize) {
531 case 1:
532 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE1);
533 break;
534 case 2:
535 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE2);
536 break;
537 case 4:
538 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE4);
539 break;
540 case 8:
541 default:
542 dest1 |= DSCR_DEST1_DTS(DSCR_xTS_SIZE8);
543 break;
544 }
545
546 /* If destination output is FIFO, set static address. */
547 if (dtp->dev_flags & DEV_FLAGS_OUT) {
548 if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
549 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
550 else
551 dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
552 }
553
554 if (dtp->dev_physaddr)
555 dest0 = dtp->dev_physaddr;
556
557#if 0
558 printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
559 "source1:%x dest0:%x dest1:%x\n",
560 dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
561 src1, dest0, dest1);
562#endif
563 for (i = 0; i < entries; i++) {
564 dp->dscr_cmd0 = cmd0;
565 dp->dscr_cmd1 = cmd1;
566 dp->dscr_source0 = src0;
567 dp->dscr_source1 = src1;
568 dp->dscr_dest0 = dest0;
569 dp->dscr_dest1 = dest1;
570 dp->dscr_stat = 0;
571 dp->sw_context = 0;
572 dp->sw_status = 0;
573 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
574 dp++;
575 }
576
577 /* Make last descrptor point to the first. */
578 dp--;
579 dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
580 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
581
582 return (u32)ctp->chan_desc_base;
583}
584EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
585
586/*
587 * Put a source buffer into the DMA ring.
588 * This updates the source pointer and byte count. Normally used
589 * for memory to fifo transfers.
590 */
591u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
592{
593 chan_tab_t *ctp;
594 au1x_ddma_desc_t *dp;
595
596 /*
597 * I guess we could check this to be within the
598 * range of the table......
599 */
600 ctp = *(chan_tab_t **)chanid;
601
602 /*
603 * We should have multiple callers for a particular channel,
604 * an interrupt doesn't affect this pointer nor the descriptor,
605 * so no locking should be needed.
606 */
607 dp = ctp->put_ptr;
608
609 /*
610 * If the descriptor is valid, we are way ahead of the DMA
611 * engine, so just return an error condition.
612 */
613 if (dp->dscr_cmd0 & DSCR_CMD0_V)
614 return 0;
615
616 /* Load up buffer address and byte count. */
617 dp->dscr_source0 = buf & ~0UL;
618 dp->dscr_cmd1 = nbytes;
619 /* Check flags */
620 if (flags & DDMA_FLAGS_IE)
621 dp->dscr_cmd0 |= DSCR_CMD0_IE;
622 if (flags & DDMA_FLAGS_NOIE)
623 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
624
625 /*
626 * There is an errata on the Au1200/Au1550 parts that could result
627 * in "stale" data being DMA'ed. It has to do with the snoop logic on
628 * the cache eviction buffer. DMA_NONCOHERENT is on by default for
629 * these parts. If it is fixed in the future, these dma_cache_inv will
630 * just be nothing more than empty macros. See io.h.
631 */
632 dma_cache_wback_inv((unsigned long)buf, nbytes);
633 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
634 wmb(); /* drain writebuffer */
635 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
636 ctp->chan_ptr->ddma_dbell = 0;
637
638 /* Get next descriptor pointer. */
639 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
640
641 /* Return something non-zero. */
642 return nbytes;
643}
644EXPORT_SYMBOL(au1xxx_dbdma_put_source);
645
646/* Put a destination buffer into the DMA ring.
647 * This updates the destination pointer and byte count. Normally used
648 * to place an empty buffer into the ring for fifo to memory transfers.
649 */
650u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
651{
652 chan_tab_t *ctp;
653 au1x_ddma_desc_t *dp;
654
655 /* I guess we could check this to be within the
656 * range of the table......
657 */
658 ctp = *((chan_tab_t **)chanid);
659
660 /* We should have multiple callers for a particular channel,
661 * an interrupt doesn't affect this pointer nor the descriptor,
662 * so no locking should be needed.
663 */
664 dp = ctp->put_ptr;
665
666 /* If the descriptor is valid, we are way ahead of the DMA
667 * engine, so just return an error condition.
668 */
669 if (dp->dscr_cmd0 & DSCR_CMD0_V)
670 return 0;
671
672 /* Load up buffer address and byte count */
673
674 /* Check flags */
675 if (flags & DDMA_FLAGS_IE)
676 dp->dscr_cmd0 |= DSCR_CMD0_IE;
677 if (flags & DDMA_FLAGS_NOIE)
678 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
679
680 dp->dscr_dest0 = buf & ~0UL;
681 dp->dscr_cmd1 = nbytes;
682#if 0
683 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
684 dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
685 dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
686#endif
687 /*
688 * There is an errata on the Au1200/Au1550 parts that could result in
689 * "stale" data being DMA'ed. It has to do with the snoop logic on the
690 * cache eviction buffer. DMA_NONCOHERENT is on by default for these
691 * parts. If it is fixed in the future, these dma_cache_inv will just
692 * be nothing more than empty macros. See io.h.
693 */
694 dma_cache_inv((unsigned long)buf, nbytes);
695 dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
696 wmb(); /* drain writebuffer */
697 dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
698 ctp->chan_ptr->ddma_dbell = 0;
699
700 /* Get next descriptor pointer. */
701 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
702
703 /* Return something non-zero. */
704 return nbytes;
705}
706EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
707
708/*
709 * Get a destination buffer into the DMA ring.
710 * Normally used to get a full buffer from the ring during fifo
711 * to memory transfers. This does not set the valid bit, you will
712 * have to put another destination buffer to keep the DMA going.
713 */
714u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
715{
716 chan_tab_t *ctp;
717 au1x_ddma_desc_t *dp;
718 u32 rv;
719
720 /*
721 * I guess we could check this to be within the
722 * range of the table......
723 */
724 ctp = *((chan_tab_t **)chanid);
725
726 /*
727 * We should have multiple callers for a particular channel,
728 * an interrupt doesn't affect this pointer nor the descriptor,
729 * so no locking should be needed.
730 */
731 dp = ctp->get_ptr;
732
733 /*
734 * If the descriptor is valid, we are way ahead of the DMA
735 * engine, so just return an error condition.
736 */
737 if (dp->dscr_cmd0 & DSCR_CMD0_V)
738 return 0;
739
740 /* Return buffer address and byte count. */
741 *buf = (void *)(phys_to_virt(dp->dscr_dest0));
742 *nbytes = dp->dscr_cmd1;
743 rv = dp->dscr_stat;
744
745 /* Get next descriptor pointer. */
746 ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
747
748 /* Return something non-zero. */
749 return rv;
750}
751EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
752
753void au1xxx_dbdma_stop(u32 chanid)
754{
755 chan_tab_t *ctp;
756 au1x_dma_chan_t *cp;
757 int halt_timeout = 0;
758
759 ctp = *((chan_tab_t **)chanid);
760
761 cp = ctp->chan_ptr;
762 cp->ddma_cfg &= ~DDMA_CFG_EN; /* Disable channel */
763 wmb(); /* drain writebuffer */
764 while (!(cp->ddma_stat & DDMA_STAT_H)) {
765 udelay(1);
766 halt_timeout++;
767 if (halt_timeout > 100) {
768 printk(KERN_WARNING "warning: DMA channel won't halt\n");
769 break;
770 }
771 }
772 /* clear current desc valid and doorbell */
773 cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
774 wmb(); /* drain writebuffer */
775}
776EXPORT_SYMBOL(au1xxx_dbdma_stop);
777
778/*
779 * Start using the current descriptor pointer. If the DBDMA encounters
780 * a non-valid descriptor, it will stop. In this case, we can just
781 * continue by adding a buffer to the list and starting again.
782 */
783void au1xxx_dbdma_start(u32 chanid)
784{
785 chan_tab_t *ctp;
786 au1x_dma_chan_t *cp;
787
788 ctp = *((chan_tab_t **)chanid);
789 cp = ctp->chan_ptr;
790 cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
791 cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
792 wmb(); /* drain writebuffer */
793 cp->ddma_dbell = 0;
794 wmb(); /* drain writebuffer */
795}
796EXPORT_SYMBOL(au1xxx_dbdma_start);
797
798void au1xxx_dbdma_reset(u32 chanid)
799{
800 chan_tab_t *ctp;
801 au1x_ddma_desc_t *dp;
802
803 au1xxx_dbdma_stop(chanid);
804
805 ctp = *((chan_tab_t **)chanid);
806 ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
807
808 /* Run through the descriptors and reset the valid indicator. */
809 dp = ctp->chan_desc_base;
810
811 do {
812 dp->dscr_cmd0 &= ~DSCR_CMD0_V;
813 /*
814 * Reset our software status -- this is used to determine
815 * if a descriptor is in use by upper level software. Since
816 * posting can reset 'V' bit.
817 */
818 dp->sw_status = 0;
819 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
820 } while (dp != ctp->chan_desc_base);
821}
822EXPORT_SYMBOL(au1xxx_dbdma_reset);
823
824u32 au1xxx_get_dma_residue(u32 chanid)
825{
826 chan_tab_t *ctp;
827 au1x_dma_chan_t *cp;
828 u32 rv;
829
830 ctp = *((chan_tab_t **)chanid);
831 cp = ctp->chan_ptr;
832
833 /* This is only valid if the channel is stopped. */
834 rv = cp->ddma_bytecnt;
835 wmb(); /* drain writebuffer */
836
837 return rv;
838}
839EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
840
841void au1xxx_dbdma_chan_free(u32 chanid)
842{
843 chan_tab_t *ctp;
844 dbdev_tab_t *stp, *dtp;
845
846 ctp = *((chan_tab_t **)chanid);
847 stp = ctp->chan_src;
848 dtp = ctp->chan_dest;
849
850 au1xxx_dbdma_stop(chanid);
851
852 kfree((void *)ctp->cdb_membase);
853
854 stp->dev_flags &= ~DEV_FLAGS_INUSE;
855 dtp->dev_flags &= ~DEV_FLAGS_INUSE;
856 chan_tab_ptr[ctp->chan_index] = NULL;
857
858 kfree(ctp);
859}
860EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
861
862static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
863{
864 u32 intstat;
865 u32 chan_index;
866 chan_tab_t *ctp;
867 au1x_ddma_desc_t *dp;
868 au1x_dma_chan_t *cp;
869
870 intstat = dbdma_gptr->ddma_intstat;
871 wmb(); /* drain writebuffer */
872 chan_index = __ffs(intstat);
873
874 ctp = chan_tab_ptr[chan_index];
875 cp = ctp->chan_ptr;
876 dp = ctp->cur_ptr;
877
878 /* Reset interrupt. */
879 cp->ddma_irq = 0;
880 wmb(); /* drain writebuffer */
881
882 if (ctp->chan_callback)
883 ctp->chan_callback(irq, ctp->chan_callparam);
884
885 ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
886 return IRQ_RETVAL(1);
887}
888
889void au1xxx_dbdma_dump(u32 chanid)
890{
891 chan_tab_t *ctp;
892 au1x_ddma_desc_t *dp;
893 dbdev_tab_t *stp, *dtp;
894 au1x_dma_chan_t *cp;
895 u32 i = 0;
896
897 ctp = *((chan_tab_t **)chanid);
898 stp = ctp->chan_src;
899 dtp = ctp->chan_dest;
900 cp = ctp->chan_ptr;
901
902 printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
903 (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
904 dtp - dbdev_tab);
905 printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
906 (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
907 (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
908
909 printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
910 printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
911 cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
912 printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
913 cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
914 cp->ddma_bytecnt);
915
916 /* Run through the descriptors */
917 dp = ctp->chan_desc_base;
918
919 do {
920 printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
921 i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
922 printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
923 dp->dscr_source0, dp->dscr_source1,
924 dp->dscr_dest0, dp->dscr_dest1);
925 printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
926 dp->dscr_stat, dp->dscr_nxtptr);
927 dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
928 } while (dp != ctp->chan_desc_base);
929}
930
931/* Put a descriptor into the DMA ring.
932 * This updates the source/destination pointers and byte count.
933 */
934u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
935{
936 chan_tab_t *ctp;
937 au1x_ddma_desc_t *dp;
938 u32 nbytes = 0;
939
940 /*
941 * I guess we could check this to be within the
942 * range of the table......
943 */
944 ctp = *((chan_tab_t **)chanid);
945
946 /*
947 * We should have multiple callers for a particular channel,
948 * an interrupt doesn't affect this pointer nor the descriptor,
949 * so no locking should be needed.
950 */
951 dp = ctp->put_ptr;
952
953 /*
954 * If the descriptor is valid, we are way ahead of the DMA
955 * engine, so just return an error condition.
956 */
957 if (dp->dscr_cmd0 & DSCR_CMD0_V)
958 return 0;
959
960 /* Load up buffer addresses and byte count. */
961 dp->dscr_dest0 = dscr->dscr_dest0;
962 dp->dscr_source0 = dscr->dscr_source0;
963 dp->dscr_dest1 = dscr->dscr_dest1;
964 dp->dscr_source1 = dscr->dscr_source1;
965 dp->dscr_cmd1 = dscr->dscr_cmd1;
966 nbytes = dscr->dscr_cmd1;
967 /* Allow the caller to specify if an interrupt is generated */
968 dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
969 dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
970 ctp->chan_ptr->ddma_dbell = 0;
971
972 /* Get next descriptor pointer. */
973 ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
974
975 /* Return something non-zero. */
976 return nbytes;
977}
978
979
980static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6];
981
982static int alchemy_dbdma_suspend(void)
983{
984 int i;
985 void __iomem *addr;
986
987 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
988 alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00);
989 alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04);
990 alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08);
991 alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c);
992
993 /* save channel configurations */
994 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
995 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
996 alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00);
997 alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04);
998 alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08);
999 alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c);
1000 alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10);
1001 alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14);
1002
1003 /* halt channel */
1004 __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00);
1005 wmb();
1006 while (!(__raw_readl(addr + 0x14) & 1))
1007 wmb();
1008
1009 addr += 0x100; /* next channel base */
1010 }
1011 /* disable channel interrupts */
1012 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1013 __raw_writel(0, addr + 0x0c);
1014 wmb();
1015
1016 return 0;
1017}
1018
1019static void alchemy_dbdma_resume(void)
1020{
1021 int i;
1022 void __iomem *addr;
1023
1024 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
1025 __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00);
1026 __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04);
1027 __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08);
1028 __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c);
1029
1030 /* restore channel configurations */
1031 addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR);
1032 for (i = 1; i <= NUM_DBDMA_CHANS; i++) {
1033 __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00);
1034 __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04);
1035 __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08);
1036 __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c);
1037 __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10);
1038 __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14);
1039 wmb();
1040 addr += 0x100; /* next channel base */
1041 }
1042}
1043
1044static struct syscore_ops alchemy_dbdma_syscore_ops = {
1045 .suspend = alchemy_dbdma_suspend,
1046 .resume = alchemy_dbdma_resume,
1047};
1048
1049static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
1050{
1051 int ret;
1052
1053 dbdev_tab = kcalloc(DBDEV_TAB_SIZE, sizeof(dbdev_tab_t), GFP_KERNEL);
1054 if (!dbdev_tab)
1055 return -ENOMEM;
1056
1057 memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
1058 for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
1059 dbdev_tab[ret].dev_id = ~0;
1060
1061 dbdma_gptr->ddma_config = 0;
1062 dbdma_gptr->ddma_throttle = 0;
1063 dbdma_gptr->ddma_inten = 0xffff;
1064 wmb(); /* drain writebuffer */
1065
1066 ret = request_irq(irq, dbdma_interrupt, 0, "dbdma", (void *)dbdma_gptr);
1067 if (ret)
1068 printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
1069 else {
1070 dbdma_initialized = 1;
1071 register_syscore_ops(&alchemy_dbdma_syscore_ops);
1072 }
1073
1074 return ret;
1075}
1076
1077static int __init alchemy_dbdma_init(void)
1078{
1079 switch (alchemy_get_cputype()) {
1080 case ALCHEMY_CPU_AU1550:
1081 return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
1082 case ALCHEMY_CPU_AU1200:
1083 return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
1084 case ALCHEMY_CPU_AU1300:
1085 return dbdma_setup(AU1300_DDMA_INT, au1300_dbdev_tab);
1086 }
1087 return 0;
1088}
1089subsys_initcall(alchemy_dbdma_init);