Loading...
Note: File does not exist in v3.1.
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * linux/arch/arm/lib/backtrace-clang.S
4 *
5 * Copyright (C) 2019 Nathan Huckleberry
6 *
7 */
8#include <linux/kern_levels.h>
9#include <linux/linkage.h>
10#include <asm/assembler.h>
11 .text
12
13/* fp is 0 or stack frame */
14
15#define frame r4
16#define sv_fp r5
17#define sv_pc r6
18#define mask r7
19#define sv_lr r8
20
21ENTRY(c_backtrace)
22
23#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
24 ret lr
25ENDPROC(c_backtrace)
26#else
27
28
29/*
30 * Clang does not store pc or sp in function prologues so we don't know exactly
31 * where the function starts.
32 *
33 * We can treat the current frame's lr as the saved pc and the preceding
34 * frame's lr as the current frame's lr, but we can't trace the most recent
35 * call. Inserting a false stack frame allows us to reference the function
36 * called last in the stacktrace.
37 *
38 * If the call instruction was a bl we can look at the callers branch
39 * instruction to calculate the saved pc. We can recover the pc in most cases,
40 * but in cases such as calling function pointers we cannot. In this case,
41 * default to using the lr. This will be some address in the function, but will
42 * not be the function start.
43 *
44 * Unfortunately due to the stack frame layout we can't dump r0 - r3, but these
45 * are less frequently saved.
46 *
47 * Stack frame layout:
48 * <larger addresses>
49 * saved lr
50 * frame=> saved fp
51 * optionally saved caller registers (r4 - r10)
52 * optionally saved arguments (r0 - r3)
53 * <top of stack frame>
54 * <smaller addresses>
55 *
56 * Functions start with the following code sequence:
57 * corrected pc => stmfd sp!, {..., fp, lr}
58 * add fp, sp, #x
59 * stmfd sp!, {r0 - r3} (optional)
60 *
61 *
62 *
63 *
64 *
65 *
66 * The diagram below shows an example stack setup for dump_stack.
67 *
68 * The frame for c_backtrace has pointers to the code of dump_stack. This is
69 * why the frame of c_backtrace is used to for the pc calculation of
70 * dump_stack. This is why we must move back a frame to print dump_stack.
71 *
72 * The stored locals for dump_stack are in dump_stack's frame. This means that
73 * to fully print dump_stack's frame we need both the frame for dump_stack (for
74 * locals) and the frame that was called by dump_stack (for pc).
75 *
76 * To print locals we must know where the function start is. If we read the
77 * function prologue opcodes we can determine which variables are stored in the
78 * stack frame.
79 *
80 * To find the function start of dump_stack we can look at the stored LR of
81 * show_stack. It points at the instruction directly after the bl dump_stack.
82 * We can then read the offset from the bl opcode to determine where the branch
83 * takes us. The address calculated must be the start of dump_stack.
84 *
85 * c_backtrace frame dump_stack:
86 * {[LR] } ============| ...
87 * {[FP] } =======| | bl c_backtrace
88 * | |=> ...
89 * {[R4-R10]} |
90 * {[R0-R3] } | show_stack:
91 * dump_stack frame | ...
92 * {[LR] } =============| bl dump_stack
93 * {[FP] } <=======| |=> ...
94 * {[R4-R10]}
95 * {[R0-R3] }
96 */
97
98 stmfd sp!, {r4 - r9, fp, lr} @ Save an extra register
99 @ to ensure 8 byte alignment
100 movs frame, r0 @ if frame pointer is zero
101 beq no_frame @ we have no stack frames
102 tst r1, #0x10 @ 26 or 32-bit mode?
103 moveq mask, #0xfc000003
104 movne mask, #0 @ mask for 32-bit
105
106/*
107 * Switches the current frame to be the frame for dump_stack.
108 */
109 add frame, sp, #24 @ switch to false frame
110for_each_frame: tst frame, mask @ Check for address exceptions
111 bne no_frame
112
113/*
114 * sv_fp is the stack frame with the locals for the current considered
115 * function.
116 *
117 * sv_pc is the saved lr frame the frame above. This is a pointer to a code
118 * address within the current considered function, but it is not the function
119 * start. This value gets updated to be the function start later if it is
120 * possible.
121 */
1221001: ldr sv_pc, [frame, #4] @ get saved 'pc'
1231002: ldr sv_fp, [frame, #0] @ get saved fp
124
125 teq sv_fp, mask @ make sure next frame exists
126 beq no_frame
127
128/*
129 * sv_lr is the lr from the function that called the current function. This is
130 * a pointer to a code address in the current function's caller. sv_lr-4 is
131 * the instruction used to call the current function.
132 *
133 * This sv_lr can be used to calculate the function start if the function was
134 * called using a bl instruction. If the function start can be recovered sv_pc
135 * is overwritten with the function start.
136 *
137 * If the current function was called using a function pointer we cannot
138 * recover the function start and instead continue with sv_pc as an arbitrary
139 * value within the current function. If this is the case we cannot print
140 * registers for the current function, but the stacktrace is still printed
141 * properly.
142 */
1431003: ldr sv_lr, [sv_fp, #4] @ get saved lr from next frame
144
145 ldr r0, [sv_lr, #-4] @ get call instruction
146 ldr r3, .Lopcode+4
147 and r2, r3, r0 @ is this a bl call
148 teq r2, r3
149 bne finished_setup @ give up if it's not
150 and r0, #0xffffff @ get call offset 24-bit int
151 lsl r0, r0, #8 @ sign extend offset
152 asr r0, r0, #8
153 ldr sv_pc, [sv_fp, #4] @ get lr address
154 add sv_pc, sv_pc, #-4 @ get call instruction address
155 add sv_pc, sv_pc, #8 @ take care of prefetch
156 add sv_pc, sv_pc, r0, lsl #2@ find function start
157
158finished_setup:
159
160 bic sv_pc, sv_pc, mask @ mask PC/LR for the mode
161
162/*
163 * Print the function (sv_pc) and where it was called from (sv_lr).
164 */
1651004: mov r0, sv_pc
166
167 mov r1, sv_lr
168 mov r2, frame
169 bic r1, r1, mask @ mask PC/LR for the mode
170 bl dump_backtrace_entry
171
172/*
173 * Test if the function start is a stmfd instruction to determine which
174 * registers were stored in the function prologue.
175 *
176 * If we could not recover the sv_pc because we were called through a function
177 * pointer the comparison will fail and no registers will print. Unwinding will
178 * continue as if there had been no registers stored in this frame.
179 */
1801005: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, lr}
181 ldr r3, .Lopcode @ instruction exists,
182 teq r3, r1, lsr #11
183 ldr r0, [frame] @ locals are stored in
184 @ the preceding frame
185 subeq r0, r0, #4
186 bleq dump_backtrace_stm @ dump saved registers
187
188/*
189 * If we are out of frames or if the next frame is invalid.
190 */
191 teq sv_fp, #0 @ zero saved fp means
192 beq no_frame @ no further frames
193
194 cmp sv_fp, frame @ next frame must be
195 mov frame, sv_fp @ above the current frame
196 bhi for_each_frame
197
1981006: adr r0, .Lbad
199 mov r1, frame
200 bl printk
201no_frame: ldmfd sp!, {r4 - r9, fp, pc}
202ENDPROC(c_backtrace)
203 .pushsection __ex_table,"a"
204 .align 3
205 .long 1001b, 1006b
206 .long 1002b, 1006b
207 .long 1003b, 1006b
208 .long 1004b, 1006b
209 .long 1005b, 1006b
210 .popsection
211
212.Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n"
213 .align
214.Lopcode: .word 0xe92d4800 >> 11 @ stmfd sp!, {... fp, lr}
215 .word 0x0b000000 @ bl if these bits are set
216
217#endif