Loading...
1/*
2 * Copyright (C) 2005-2007 by Texas Instruments
3 * Some code has been taken from tusb6010.c
4 * Copyrights for that are attributable to:
5 * Copyright (C) 2006 Nokia Corporation
6 * Tony Lindgren <tony@atomide.com>
7 *
8 * This file is part of the Inventra Controller Driver for Linux.
9 *
10 * The Inventra Controller Driver for Linux is free software; you
11 * can redistribute it and/or modify it under the terms of the GNU
12 * General Public License version 2 as published by the Free Software
13 * Foundation.
14 *
15 * The Inventra Controller Driver for Linux is distributed in
16 * the hope that it will be useful, but WITHOUT ANY WARRANTY;
17 * without even the implied warranty of MERCHANTABILITY or
18 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
19 * License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with The Inventra Controller Driver for Linux ; if not,
23 * write to the Free Software Foundation, Inc., 59 Temple Place,
24 * Suite 330, Boston, MA 02111-1307 USA
25 *
26 */
27#include <linux/module.h>
28#include <linux/kernel.h>
29#include <linux/sched.h>
30#include <linux/init.h>
31#include <linux/list.h>
32#include <linux/clk.h>
33#include <linux/io.h>
34#include <linux/platform_device.h>
35#include <linux/dma-mapping.h>
36#include <linux/pm_runtime.h>
37#include <linux/err.h>
38
39#include "musb_core.h"
40#include "omap2430.h"
41
42struct omap2430_glue {
43 struct device *dev;
44 struct platform_device *musb;
45};
46#define glue_to_musb(g) platform_get_drvdata(g->musb)
47
48static struct timer_list musb_idle_timer;
49
50static void musb_do_idle(unsigned long _musb)
51{
52 struct musb *musb = (void *)_musb;
53 unsigned long flags;
54 u8 power;
55 u8 devctl;
56
57 spin_lock_irqsave(&musb->lock, flags);
58
59 switch (musb->xceiv->state) {
60 case OTG_STATE_A_WAIT_BCON:
61
62 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
63 if (devctl & MUSB_DEVCTL_BDEVICE) {
64 musb->xceiv->state = OTG_STATE_B_IDLE;
65 MUSB_DEV_MODE(musb);
66 } else {
67 musb->xceiv->state = OTG_STATE_A_IDLE;
68 MUSB_HST_MODE(musb);
69 }
70 break;
71 case OTG_STATE_A_SUSPEND:
72 /* finish RESUME signaling? */
73 if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
74 power = musb_readb(musb->mregs, MUSB_POWER);
75 power &= ~MUSB_POWER_RESUME;
76 dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
77 musb_writeb(musb->mregs, MUSB_POWER, power);
78 musb->is_active = 1;
79 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
80 | MUSB_PORT_STAT_RESUME);
81 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
82 usb_hcd_poll_rh_status(musb_to_hcd(musb));
83 /* NOTE: it might really be A_WAIT_BCON ... */
84 musb->xceiv->state = OTG_STATE_A_HOST;
85 }
86 break;
87 case OTG_STATE_A_HOST:
88 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
89 if (devctl & MUSB_DEVCTL_BDEVICE)
90 musb->xceiv->state = OTG_STATE_B_IDLE;
91 else
92 musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
93 default:
94 break;
95 }
96 spin_unlock_irqrestore(&musb->lock, flags);
97}
98
99
100static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
101{
102 unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
103 static unsigned long last_timer;
104
105 if (timeout == 0)
106 timeout = default_timeout;
107
108 /* Never idle if active, or when VBUS timeout is not set as host */
109 if (musb->is_active || ((musb->a_wait_bcon == 0)
110 && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
111 dev_dbg(musb->controller, "%s active, deleting timer\n",
112 otg_state_string(musb->xceiv->state));
113 del_timer(&musb_idle_timer);
114 last_timer = jiffies;
115 return;
116 }
117
118 if (time_after(last_timer, timeout)) {
119 if (!timer_pending(&musb_idle_timer))
120 last_timer = timeout;
121 else {
122 dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
123 return;
124 }
125 }
126 last_timer = timeout;
127
128 dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
129 otg_state_string(musb->xceiv->state),
130 (unsigned long)jiffies_to_msecs(timeout - jiffies));
131 mod_timer(&musb_idle_timer, timeout);
132}
133
134static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
135{
136 u8 devctl;
137 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
138 int ret = 1;
139 /* HDRC controls CPEN, but beware current surges during device
140 * connect. They can trigger transient overcurrent conditions
141 * that must be ignored.
142 */
143
144 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
145
146 if (is_on) {
147 if (musb->xceiv->state == OTG_STATE_A_IDLE) {
148 /* start the session */
149 devctl |= MUSB_DEVCTL_SESSION;
150 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
151 /*
152 * Wait for the musb to set as A device to enable the
153 * VBUS
154 */
155 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
156
157 cpu_relax();
158
159 if (time_after(jiffies, timeout)) {
160 dev_err(musb->controller,
161 "configured as A device timeout");
162 ret = -EINVAL;
163 break;
164 }
165 }
166
167 if (ret && musb->xceiv->set_vbus)
168 otg_set_vbus(musb->xceiv, 1);
169 } else {
170 musb->is_active = 1;
171 musb->xceiv->default_a = 1;
172 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
173 devctl |= MUSB_DEVCTL_SESSION;
174 MUSB_HST_MODE(musb);
175 }
176 } else {
177 musb->is_active = 0;
178
179 /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
180 * jumping right to B_IDLE...
181 */
182
183 musb->xceiv->default_a = 0;
184 musb->xceiv->state = OTG_STATE_B_IDLE;
185 devctl &= ~MUSB_DEVCTL_SESSION;
186
187 MUSB_DEV_MODE(musb);
188 }
189 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
190
191 dev_dbg(musb->controller, "VBUS %s, devctl %02x "
192 /* otg %3x conf %08x prcm %08x */ "\n",
193 otg_state_string(musb->xceiv->state),
194 musb_readb(musb->mregs, MUSB_DEVCTL));
195}
196
197static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
198{
199 u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
200
201 devctl |= MUSB_DEVCTL_SESSION;
202 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
203
204 return 0;
205}
206
207static inline void omap2430_low_level_exit(struct musb *musb)
208{
209 u32 l;
210
211 /* in any role */
212 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
213 l |= ENABLEFORCE; /* enable MSTANDBY */
214 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
215}
216
217static inline void omap2430_low_level_init(struct musb *musb)
218{
219 u32 l;
220
221 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
222 l &= ~ENABLEFORCE; /* disable MSTANDBY */
223 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
224}
225
226/* blocking notifier support */
227static int musb_otg_notifications(struct notifier_block *nb,
228 unsigned long event, void *unused)
229{
230 struct musb *musb = container_of(nb, struct musb, nb);
231 struct device *dev = musb->controller;
232 struct musb_hdrc_platform_data *pdata = dev->platform_data;
233 struct omap_musb_board_data *data = pdata->board_data;
234
235 switch (event) {
236 case USB_EVENT_ID:
237 dev_dbg(musb->controller, "ID GND\n");
238
239 if (is_otg_enabled(musb)) {
240 if (musb->gadget_driver) {
241 pm_runtime_get_sync(musb->controller);
242 otg_init(musb->xceiv);
243 omap2430_musb_set_vbus(musb, 1);
244 }
245 } else {
246 pm_runtime_get_sync(musb->controller);
247 otg_init(musb->xceiv);
248 omap2430_musb_set_vbus(musb, 1);
249 }
250 break;
251
252 case USB_EVENT_VBUS:
253 dev_dbg(musb->controller, "VBUS Connect\n");
254
255 if (musb->gadget_driver)
256 pm_runtime_get_sync(musb->controller);
257 otg_init(musb->xceiv);
258 break;
259
260 case USB_EVENT_NONE:
261 dev_dbg(musb->controller, "VBUS Disconnect\n");
262
263 if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
264 if (musb->gadget_driver) {
265 pm_runtime_mark_last_busy(musb->controller);
266 pm_runtime_put_autosuspend(musb->controller);
267 }
268
269 if (data->interface_type == MUSB_INTERFACE_UTMI) {
270 if (musb->xceiv->set_vbus)
271 otg_set_vbus(musb->xceiv, 0);
272 }
273 otg_shutdown(musb->xceiv);
274 break;
275 default:
276 dev_dbg(musb->controller, "ID float\n");
277 return NOTIFY_DONE;
278 }
279
280 return NOTIFY_OK;
281}
282
283static int omap2430_musb_init(struct musb *musb)
284{
285 u32 l, status = 0;
286 struct device *dev = musb->controller;
287 struct musb_hdrc_platform_data *plat = dev->platform_data;
288 struct omap_musb_board_data *data = plat->board_data;
289
290 /* We require some kind of external transceiver, hooked
291 * up through ULPI. TWL4030-family PMICs include one,
292 * which needs a driver, drivers aren't always needed.
293 */
294 musb->xceiv = otg_get_transceiver();
295 if (!musb->xceiv) {
296 pr_err("HS USB OTG: no transceiver configured\n");
297 return -ENODEV;
298 }
299
300 status = pm_runtime_get_sync(dev);
301 if (status < 0) {
302 dev_err(dev, "pm_runtime_get_sync FAILED");
303 goto err1;
304 }
305
306 l = musb_readl(musb->mregs, OTG_INTERFSEL);
307
308 if (data->interface_type == MUSB_INTERFACE_UTMI) {
309 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
310 l &= ~ULPI_12PIN; /* Disable ULPI */
311 l |= UTMI_8BIT; /* Enable UTMI */
312 } else {
313 l |= ULPI_12PIN;
314 }
315
316 musb_writel(musb->mregs, OTG_INTERFSEL, l);
317
318 pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
319 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
320 musb_readl(musb->mregs, OTG_REVISION),
321 musb_readl(musb->mregs, OTG_SYSCONFIG),
322 musb_readl(musb->mregs, OTG_SYSSTATUS),
323 musb_readl(musb->mregs, OTG_INTERFSEL),
324 musb_readl(musb->mregs, OTG_SIMENABLE));
325
326 musb->nb.notifier_call = musb_otg_notifications;
327 status = otg_register_notifier(musb->xceiv, &musb->nb);
328
329 if (status)
330 dev_dbg(musb->controller, "notification register failed\n");
331
332 setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
333
334 return 0;
335
336err1:
337 pm_runtime_disable(dev);
338 return status;
339}
340
341static void omap2430_musb_enable(struct musb *musb)
342{
343 u8 devctl;
344 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
345 struct device *dev = musb->controller;
346 struct musb_hdrc_platform_data *pdata = dev->platform_data;
347 struct omap_musb_board_data *data = pdata->board_data;
348
349 switch (musb->xceiv->last_event) {
350
351 case USB_EVENT_ID:
352 otg_init(musb->xceiv);
353 if (data->interface_type == MUSB_INTERFACE_UTMI) {
354 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
355 /* start the session */
356 devctl |= MUSB_DEVCTL_SESSION;
357 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
358 while (musb_readb(musb->mregs, MUSB_DEVCTL) &
359 MUSB_DEVCTL_BDEVICE) {
360 cpu_relax();
361
362 if (time_after(jiffies, timeout)) {
363 dev_err(musb->controller,
364 "configured as A device timeout");
365 break;
366 }
367 }
368 }
369 break;
370
371 case USB_EVENT_VBUS:
372 otg_init(musb->xceiv);
373 break;
374
375 default:
376 break;
377 }
378}
379
380static void omap2430_musb_disable(struct musb *musb)
381{
382 if (musb->xceiv->last_event)
383 otg_shutdown(musb->xceiv);
384}
385
386static int omap2430_musb_exit(struct musb *musb)
387{
388 del_timer_sync(&musb_idle_timer);
389
390 omap2430_low_level_exit(musb);
391 otg_put_transceiver(musb->xceiv);
392
393 return 0;
394}
395
396static const struct musb_platform_ops omap2430_ops = {
397 .init = omap2430_musb_init,
398 .exit = omap2430_musb_exit,
399
400 .set_mode = omap2430_musb_set_mode,
401 .try_idle = omap2430_musb_try_idle,
402
403 .set_vbus = omap2430_musb_set_vbus,
404
405 .enable = omap2430_musb_enable,
406 .disable = omap2430_musb_disable,
407};
408
409static u64 omap2430_dmamask = DMA_BIT_MASK(32);
410
411static int __init omap2430_probe(struct platform_device *pdev)
412{
413 struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
414 struct platform_device *musb;
415 struct omap2430_glue *glue;
416 int ret = -ENOMEM;
417
418 glue = kzalloc(sizeof(*glue), GFP_KERNEL);
419 if (!glue) {
420 dev_err(&pdev->dev, "failed to allocate glue context\n");
421 goto err0;
422 }
423
424 musb = platform_device_alloc("musb-hdrc", -1);
425 if (!musb) {
426 dev_err(&pdev->dev, "failed to allocate musb device\n");
427 goto err1;
428 }
429
430 musb->dev.parent = &pdev->dev;
431 musb->dev.dma_mask = &omap2430_dmamask;
432 musb->dev.coherent_dma_mask = omap2430_dmamask;
433
434 glue->dev = &pdev->dev;
435 glue->musb = musb;
436
437 pdata->platform_ops = &omap2430_ops;
438
439 platform_set_drvdata(pdev, glue);
440
441 ret = platform_device_add_resources(musb, pdev->resource,
442 pdev->num_resources);
443 if (ret) {
444 dev_err(&pdev->dev, "failed to add resources\n");
445 goto err2;
446 }
447
448 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
449 if (ret) {
450 dev_err(&pdev->dev, "failed to add platform_data\n");
451 goto err2;
452 }
453
454 ret = platform_device_add(musb);
455 if (ret) {
456 dev_err(&pdev->dev, "failed to register musb device\n");
457 goto err2;
458 }
459
460 pm_runtime_enable(&pdev->dev);
461
462 return 0;
463
464err2:
465 platform_device_put(musb);
466
467err1:
468 kfree(glue);
469
470err0:
471 return ret;
472}
473
474static int __exit omap2430_remove(struct platform_device *pdev)
475{
476 struct omap2430_glue *glue = platform_get_drvdata(pdev);
477
478 platform_device_del(glue->musb);
479 platform_device_put(glue->musb);
480 pm_runtime_put(&pdev->dev);
481 pm_runtime_disable(&pdev->dev);
482 kfree(glue);
483
484 return 0;
485}
486
487#ifdef CONFIG_PM
488
489static int omap2430_runtime_suspend(struct device *dev)
490{
491 struct omap2430_glue *glue = dev_get_drvdata(dev);
492 struct musb *musb = glue_to_musb(glue);
493
494 omap2430_low_level_exit(musb);
495 otg_set_suspend(musb->xceiv, 1);
496
497 return 0;
498}
499
500static int omap2430_runtime_resume(struct device *dev)
501{
502 struct omap2430_glue *glue = dev_get_drvdata(dev);
503 struct musb *musb = glue_to_musb(glue);
504
505 omap2430_low_level_init(musb);
506 otg_set_suspend(musb->xceiv, 0);
507
508 return 0;
509}
510
511static struct dev_pm_ops omap2430_pm_ops = {
512 .runtime_suspend = omap2430_runtime_suspend,
513 .runtime_resume = omap2430_runtime_resume,
514};
515
516#define DEV_PM_OPS (&omap2430_pm_ops)
517#else
518#define DEV_PM_OPS NULL
519#endif
520
521static struct platform_driver omap2430_driver = {
522 .remove = __exit_p(omap2430_remove),
523 .driver = {
524 .name = "musb-omap2430",
525 .pm = DEV_PM_OPS,
526 },
527};
528
529MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
530MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
531MODULE_LICENSE("GPL v2");
532
533static int __init omap2430_init(void)
534{
535 return platform_driver_probe(&omap2430_driver, omap2430_probe);
536}
537subsys_initcall(omap2430_init);
538
539static void __exit omap2430_exit(void)
540{
541 platform_driver_unregister(&omap2430_driver);
542}
543module_exit(omap2430_exit);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2005-2007 by Texas Instruments
4 * Some code has been taken from tusb6010.c
5 * Copyrights for that are attributable to:
6 * Copyright (C) 2006 Nokia Corporation
7 * Tony Lindgren <tony@atomide.com>
8 *
9 * This file is part of the Inventra Controller Driver for Linux.
10 */
11#include <linux/module.h>
12#include <linux/kernel.h>
13#include <linux/sched.h>
14#include <linux/init.h>
15#include <linux/list.h>
16#include <linux/io.h>
17#include <linux/of.h>
18#include <linux/platform_device.h>
19#include <linux/dma-mapping.h>
20#include <linux/pm_runtime.h>
21#include <linux/err.h>
22#include <linux/delay.h>
23#include <linux/usb/musb.h>
24#include <linux/phy/omap_control_phy.h>
25#include <linux/of_platform.h>
26
27#include "musb_core.h"
28#include "omap2430.h"
29
30struct omap2430_glue {
31 struct device *dev;
32 struct platform_device *musb;
33 enum musb_vbus_id_status status;
34 struct work_struct omap_musb_mailbox_work;
35 struct device *control_otghs;
36 unsigned int is_runtime_suspended:1;
37 unsigned int needs_resume:1;
38 unsigned int phy_suspended:1;
39};
40#define glue_to_musb(g) platform_get_drvdata(g->musb)
41
42static struct omap2430_glue *_glue;
43
44static inline void omap2430_low_level_exit(struct musb *musb)
45{
46 u32 l;
47
48 /* in any role */
49 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
50 l |= ENABLEFORCE; /* enable MSTANDBY */
51 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
52}
53
54static inline void omap2430_low_level_init(struct musb *musb)
55{
56 u32 l;
57
58 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
59 l &= ~ENABLEFORCE; /* disable MSTANDBY */
60 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
61}
62
63static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
64{
65 struct omap2430_glue *glue = _glue;
66
67 if (!glue) {
68 pr_err("%s: musb core is not yet initialized\n", __func__);
69 return -EPROBE_DEFER;
70 }
71 glue->status = status;
72
73 if (!glue_to_musb(glue)) {
74 pr_err("%s: musb core is not yet ready\n", __func__);
75 return -EPROBE_DEFER;
76 }
77
78 schedule_work(&glue->omap_musb_mailbox_work);
79
80 return 0;
81}
82
83/*
84 * HDRC controls CPEN, but beware current surges during device connect.
85 * They can trigger transient overcurrent conditions that must be ignored.
86 *
87 * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
88 * as set by musb_set_peripheral().
89 */
90static void omap_musb_set_mailbox(struct omap2430_glue *glue)
91{
92 struct musb *musb = glue_to_musb(glue);
93 int error;
94
95 pm_runtime_get_sync(musb->controller);
96
97 dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
98 usb_otg_state_string(musb->xceiv->otg->state),
99 musb_readb(musb->mregs, MUSB_DEVCTL));
100
101 switch (glue->status) {
102 case MUSB_ID_GROUND:
103 dev_dbg(musb->controller, "ID GND\n");
104 switch (musb->xceiv->otg->state) {
105 case OTG_STATE_A_IDLE:
106 error = musb_set_host(musb);
107 if (error)
108 break;
109 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
110 fallthrough;
111 case OTG_STATE_A_WAIT_VRISE:
112 case OTG_STATE_A_WAIT_BCON:
113 case OTG_STATE_A_HOST:
114 /*
115 * On multiple ID ground interrupts just keep enabling
116 * VBUS. At least cpcap VBUS shuts down otherwise.
117 */
118 otg_set_vbus(musb->xceiv->otg, 1);
119 break;
120 default:
121 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
122 musb->xceiv->last_event = USB_EVENT_ID;
123 if (musb->gadget_driver) {
124 omap_control_usb_set_mode(glue->control_otghs,
125 USB_MODE_HOST);
126 otg_set_vbus(musb->xceiv->otg, 1);
127 }
128 break;
129 }
130 break;
131
132 case MUSB_VBUS_VALID:
133 dev_dbg(musb->controller, "VBUS Connect\n");
134
135 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
136 musb->xceiv->last_event = USB_EVENT_VBUS;
137 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
138 break;
139
140 case MUSB_ID_FLOAT:
141 case MUSB_VBUS_OFF:
142 dev_dbg(musb->controller, "VBUS Disconnect\n");
143
144 musb->xceiv->last_event = USB_EVENT_NONE;
145 musb_set_peripheral(musb);
146 otg_set_vbus(musb->xceiv->otg, 0);
147 omap_control_usb_set_mode(glue->control_otghs,
148 USB_MODE_DISCONNECT);
149 break;
150 default:
151 dev_dbg(musb->controller, "ID float\n");
152 }
153 pm_runtime_mark_last_busy(musb->controller);
154 pm_runtime_put_autosuspend(musb->controller);
155 atomic_notifier_call_chain(&musb->xceiv->notifier,
156 musb->xceiv->last_event, NULL);
157}
158
159
160static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
161{
162 struct omap2430_glue *glue = container_of(mailbox_work,
163 struct omap2430_glue, omap_musb_mailbox_work);
164
165 omap_musb_set_mailbox(glue);
166}
167
168static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
169{
170 unsigned long flags;
171 irqreturn_t retval = IRQ_NONE;
172 struct musb *musb = __hci;
173
174 spin_lock_irqsave(&musb->lock, flags);
175
176 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
177 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
178 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
179
180 if (musb->int_usb || musb->int_tx || musb->int_rx)
181 retval = musb_interrupt(musb);
182
183 spin_unlock_irqrestore(&musb->lock, flags);
184
185 return retval;
186}
187
188static int omap2430_musb_init(struct musb *musb)
189{
190 u32 l;
191 int status = 0;
192 struct device *dev = musb->controller;
193 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
194 struct omap_musb_board_data *data = plat->board_data;
195
196 /* We require some kind of external transceiver, hooked
197 * up through ULPI. TWL4030-family PMICs include one,
198 * which needs a driver, drivers aren't always needed.
199 */
200 musb->phy = devm_phy_get(dev->parent, "usb2-phy");
201
202 /* We can't totally remove musb->xceiv as of now because
203 * musb core uses xceiv.state and xceiv.otg. Once we have
204 * a separate state machine to handle otg, these can be moved
205 * out of xceiv and then we can start using the generic PHY
206 * framework
207 */
208 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
209
210 if (IS_ERR(musb->xceiv)) {
211 status = PTR_ERR(musb->xceiv);
212
213 if (status == -ENXIO)
214 return status;
215
216 dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
217 return -EPROBE_DEFER;
218 }
219
220 if (IS_ERR(musb->phy)) {
221 dev_err(dev, "HS USB OTG: no PHY configured\n");
222 return PTR_ERR(musb->phy);
223 }
224 musb->isr = omap2430_musb_interrupt;
225 phy_init(musb->phy);
226 phy_power_on(musb->phy);
227
228 l = musb_readl(musb->mregs, OTG_INTERFSEL);
229
230 if (data->interface_type == MUSB_INTERFACE_UTMI) {
231 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
232 l &= ~ULPI_12PIN; /* Disable ULPI */
233 l |= UTMI_8BIT; /* Enable UTMI */
234 } else {
235 l |= ULPI_12PIN;
236 }
237
238 musb_writel(musb->mregs, OTG_INTERFSEL, l);
239
240 dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
241 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
242 musb_readl(musb->mregs, OTG_REVISION),
243 musb_readl(musb->mregs, OTG_SYSCONFIG),
244 musb_readl(musb->mregs, OTG_SYSSTATUS),
245 musb_readl(musb->mregs, OTG_INTERFSEL),
246 musb_readl(musb->mregs, OTG_SIMENABLE));
247
248 return 0;
249}
250
251static void omap2430_musb_enable(struct musb *musb)
252{
253 struct device *dev = musb->controller;
254 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
255
256 if (glue->status == MUSB_UNKNOWN)
257 glue->status = MUSB_VBUS_OFF;
258 omap_musb_set_mailbox(glue);
259}
260
261static void omap2430_musb_disable(struct musb *musb)
262{
263 struct device *dev = musb->controller;
264 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
265
266 if (glue->status != MUSB_UNKNOWN)
267 omap_control_usb_set_mode(glue->control_otghs,
268 USB_MODE_DISCONNECT);
269}
270
271static int omap2430_musb_exit(struct musb *musb)
272{
273 struct device *dev = musb->controller;
274 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
275
276 omap2430_low_level_exit(musb);
277 phy_power_off(musb->phy);
278 phy_exit(musb->phy);
279 musb->phy = NULL;
280 cancel_work_sync(&glue->omap_musb_mailbox_work);
281
282 return 0;
283}
284
285static const struct musb_platform_ops omap2430_ops = {
286 .quirks = MUSB_DMA_INVENTRA,
287#ifdef CONFIG_USB_INVENTRA_DMA
288 .dma_init = musbhs_dma_controller_create,
289 .dma_exit = musbhs_dma_controller_destroy,
290#endif
291 .init = omap2430_musb_init,
292 .exit = omap2430_musb_exit,
293
294 .enable = omap2430_musb_enable,
295 .disable = omap2430_musb_disable,
296
297 .phy_callback = omap2430_musb_mailbox,
298};
299
300static u64 omap2430_dmamask = DMA_BIT_MASK(32);
301
302static int omap2430_probe(struct platform_device *pdev)
303{
304 struct resource musb_resources[3];
305 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
306 struct omap_musb_board_data *data;
307 struct platform_device *musb;
308 struct omap2430_glue *glue;
309 struct device_node *np = pdev->dev.of_node;
310 struct musb_hdrc_config *config;
311 struct device_node *control_node;
312 struct platform_device *control_pdev;
313 int ret = -ENOMEM, val;
314
315 if (!np)
316 return -ENODEV;
317
318 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
319 if (!glue)
320 goto err0;
321
322 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
323 if (!musb) {
324 dev_err(&pdev->dev, "failed to allocate musb device\n");
325 goto err0;
326 }
327
328 musb->dev.parent = &pdev->dev;
329 musb->dev.dma_mask = &omap2430_dmamask;
330 musb->dev.coherent_dma_mask = omap2430_dmamask;
331
332 glue->dev = &pdev->dev;
333 glue->musb = musb;
334 glue->status = MUSB_UNKNOWN;
335 glue->control_otghs = ERR_PTR(-ENODEV);
336
337 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
338 if (!pdata)
339 goto err2;
340
341 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
342 if (!data)
343 goto err2;
344
345 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
346 if (!config)
347 goto err2;
348
349 of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
350 of_property_read_u32(np, "interface-type",
351 (u32 *)&data->interface_type);
352 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
353 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
354 of_property_read_u32(np, "power", (u32 *)&pdata->power);
355
356 ret = of_property_read_u32(np, "multipoint", &val);
357 if (!ret && val)
358 config->multipoint = true;
359
360 pdata->board_data = data;
361 pdata->config = config;
362
363 control_node = of_parse_phandle(np, "ctrl-module", 0);
364 if (control_node) {
365 control_pdev = of_find_device_by_node(control_node);
366 if (!control_pdev) {
367 dev_err(&pdev->dev, "Failed to get control device\n");
368 ret = -EINVAL;
369 goto err2;
370 }
371 glue->control_otghs = &control_pdev->dev;
372 }
373
374 pdata->platform_ops = &omap2430_ops;
375
376 platform_set_drvdata(pdev, glue);
377
378 /*
379 * REVISIT if we ever have two instances of the wrapper, we will be
380 * in big trouble
381 */
382 _glue = glue;
383
384 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
385
386 memset(musb_resources, 0x00, sizeof(*musb_resources) *
387 ARRAY_SIZE(musb_resources));
388
389 musb_resources[0].name = pdev->resource[0].name;
390 musb_resources[0].start = pdev->resource[0].start;
391 musb_resources[0].end = pdev->resource[0].end;
392 musb_resources[0].flags = pdev->resource[0].flags;
393
394 musb_resources[1].name = pdev->resource[1].name;
395 musb_resources[1].start = pdev->resource[1].start;
396 musb_resources[1].end = pdev->resource[1].end;
397 musb_resources[1].flags = pdev->resource[1].flags;
398
399 musb_resources[2].name = pdev->resource[2].name;
400 musb_resources[2].start = pdev->resource[2].start;
401 musb_resources[2].end = pdev->resource[2].end;
402 musb_resources[2].flags = pdev->resource[2].flags;
403
404 ret = platform_device_add_resources(musb, musb_resources,
405 ARRAY_SIZE(musb_resources));
406 if (ret) {
407 dev_err(&pdev->dev, "failed to add resources\n");
408 goto err2;
409 }
410
411 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
412 if (ret) {
413 dev_err(&pdev->dev, "failed to add platform_data\n");
414 goto err2;
415 }
416
417 pm_runtime_enable(glue->dev);
418
419 ret = platform_device_add(musb);
420 if (ret) {
421 dev_err(&pdev->dev, "failed to register musb device\n");
422 goto err3;
423 }
424
425 return 0;
426
427err3:
428 pm_runtime_disable(glue->dev);
429
430err2:
431 platform_device_put(musb);
432
433err0:
434 return ret;
435}
436
437static int omap2430_remove(struct platform_device *pdev)
438{
439 struct omap2430_glue *glue = platform_get_drvdata(pdev);
440
441 platform_device_unregister(glue->musb);
442 pm_runtime_disable(glue->dev);
443
444 return 0;
445}
446
447#ifdef CONFIG_PM
448
449static int omap2430_runtime_suspend(struct device *dev)
450{
451 struct omap2430_glue *glue = dev_get_drvdata(dev);
452 struct musb *musb = glue_to_musb(glue);
453
454 if (!musb)
455 return 0;
456
457 musb->context.otg_interfsel = musb_readl(musb->mregs,
458 OTG_INTERFSEL);
459
460 omap2430_low_level_exit(musb);
461
462 if (!glue->phy_suspended) {
463 phy_power_off(musb->phy);
464 phy_exit(musb->phy);
465 }
466
467 glue->is_runtime_suspended = 1;
468
469 return 0;
470}
471
472static int omap2430_runtime_resume(struct device *dev)
473{
474 struct omap2430_glue *glue = dev_get_drvdata(dev);
475 struct musb *musb = glue_to_musb(glue);
476
477 if (!musb)
478 return 0;
479
480 if (!glue->phy_suspended) {
481 phy_init(musb->phy);
482 phy_power_on(musb->phy);
483 }
484
485 omap2430_low_level_init(musb);
486 musb_writel(musb->mregs, OTG_INTERFSEL,
487 musb->context.otg_interfsel);
488
489 /* Wait for musb to get oriented. Otherwise we can get babble */
490 usleep_range(200000, 250000);
491
492 glue->is_runtime_suspended = 0;
493
494 return 0;
495}
496
497/* I2C and SPI PHYs need to be suspended before the glue layer */
498static int omap2430_suspend(struct device *dev)
499{
500 struct omap2430_glue *glue = dev_get_drvdata(dev);
501 struct musb *musb = glue_to_musb(glue);
502
503 phy_power_off(musb->phy);
504 phy_exit(musb->phy);
505 glue->phy_suspended = 1;
506
507 return 0;
508}
509
510/* Glue layer needs to be suspended after musb_suspend() */
511static int omap2430_suspend_late(struct device *dev)
512{
513 struct omap2430_glue *glue = dev_get_drvdata(dev);
514
515 if (glue->is_runtime_suspended)
516 return 0;
517
518 glue->needs_resume = 1;
519
520 return omap2430_runtime_suspend(dev);
521}
522
523static int omap2430_resume_early(struct device *dev)
524{
525 struct omap2430_glue *glue = dev_get_drvdata(dev);
526
527 if (!glue->needs_resume)
528 return 0;
529
530 glue->needs_resume = 0;
531
532 return omap2430_runtime_resume(dev);
533}
534
535static int omap2430_resume(struct device *dev)
536{
537 struct omap2430_glue *glue = dev_get_drvdata(dev);
538 struct musb *musb = glue_to_musb(glue);
539
540 phy_init(musb->phy);
541 phy_power_on(musb->phy);
542 glue->phy_suspended = 0;
543
544 return 0;
545}
546
547static const struct dev_pm_ops omap2430_pm_ops = {
548 .runtime_suspend = omap2430_runtime_suspend,
549 .runtime_resume = omap2430_runtime_resume,
550 .suspend = omap2430_suspend,
551 .suspend_late = omap2430_suspend_late,
552 .resume_early = omap2430_resume_early,
553 .resume = omap2430_resume,
554};
555
556#define DEV_PM_OPS (&omap2430_pm_ops)
557#else
558#define DEV_PM_OPS NULL
559#endif
560
561#ifdef CONFIG_OF
562static const struct of_device_id omap2430_id_table[] = {
563 {
564 .compatible = "ti,omap4-musb"
565 },
566 {
567 .compatible = "ti,omap3-musb"
568 },
569 {},
570};
571MODULE_DEVICE_TABLE(of, omap2430_id_table);
572#endif
573
574static struct platform_driver omap2430_driver = {
575 .probe = omap2430_probe,
576 .remove = omap2430_remove,
577 .driver = {
578 .name = "musb-omap2430",
579 .pm = DEV_PM_OPS,
580 .of_match_table = of_match_ptr(omap2430_id_table),
581 },
582};
583
584module_platform_driver(omap2430_driver);
585
586MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
587MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
588MODULE_LICENSE("GPL v2");