1#
  2# USB Dual Role (OTG-ready) Controller Drivers
  3# for silicon based on Mentor Graphics INVENTRA designs
  4#
  5
  6# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
  7config USB_MUSB_HDRC
  8	depends on USB && USB_GADGET
  9	depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 10	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
 11	select TWL4030_USB if MACH_OMAP_3430SDP
 12	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 13	select USB_OTG_UTILS
 14	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 15	help
 16	  Say Y here if your system has a dual role high speed USB
 17	  controller based on the Mentor Graphics silicon IP.  Then
 18	  configure options to match your silicon and the board
 19	  it's being used with, including the USB peripheral role,
 20	  or the USB host role, or both.
 21
 22	  Texas Instruments familiies using this IP include DaVinci
 23	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 24
 25	  Analog Devices parts using this IP include Blackfin BF54x,
 26	  BF525 and BF527.
 27
 28	  If you do not know what this is, please say N.
 29
 30	  To compile this driver as a module, choose M here; the
 31	  module will be called "musb-hdrc".
 32
 
 
 33choice
 34	prompt "Platform Glue Layer"
 35	depends on USB_MUSB_HDRC
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 36
 37config USB_MUSB_DAVINCI
 38	tristate "DaVinci"
 39	depends on ARCH_DAVINCI_DMx
 
 
 40
 41config USB_MUSB_DA8XX
 42	tristate "DA8xx/OMAP-L1x"
 43	depends on ARCH_DAVINCI_DA8XX
 
 
 44
 45config USB_MUSB_TUSB6010
 46	tristate "TUSB6010"
 47	depends on ARCH_OMAP
 
 
 48
 49config USB_MUSB_OMAP2PLUS
 50	tristate "OMAP2430 and onwards"
 51	depends on ARCH_OMAP2PLUS
 
 
 52
 53config USB_MUSB_AM35X
 54	tristate "AM35x"
 55	depends on ARCH_OMAP
 
 56
 57config USB_MUSB_BLACKFIN
 58	tristate "Blackfin"
 59	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
 60
 61config USB_MUSB_UX500
 62	tristate "U8500 and U5500"
 63	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
 64
 65endchoice
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 66
 67config MUSB_PIO_ONLY
 68	bool 'Disable DMA (always use PIO)'
 69	depends on USB_MUSB_HDRC
 70	default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
 71	help
 72	  All data is copied between memory and FIFO by the CPU.
 73	  DMA controllers are ignored.
 74
 75	  Do not select 'n' here unless DMA support for your SOC or board
 76	  is unavailable (or unstable).  When DMA is enabled at compile time,
 77	  you can still disable it at run time using the "use_dma=n" module
 78	  parameter.
 79
 
 
 80config USB_UX500_DMA
 81	bool
 82	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
 83	default USB_MUSB_UX500
 84	help
 85	  Enable DMA transfers on UX500 platforms.
 86
 87config USB_INVENTRA_DMA
 88	bool
 89	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
 90	default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 91	help
 92	  Enable DMA transfers using Mentor's engine.
 93
 94config USB_TI_CPPI_DMA
 95	bool
 96	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
 97	default USB_MUSB_DAVINCI
 98	help
 99	  Enable DMA transfers when TI CPPI DMA is available.
100
 
 
 
 
 
101config USB_TUSB_OMAP_DMA
102	bool
103	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
104	depends on USB_MUSB_TUSB6010
105	depends on ARCH_OMAP
106	default y
107	help
108	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
109

  1# SPDX-License-Identifier: GPL-2.0
  2#
  3# USB Dual Role (OTG-ready) Controller Drivers
  4# for silicon based on Mentor Graphics INVENTRA designs
  5#
  6
  7# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
  8config USB_MUSB_HDRC
  9	tristate 'Inventra Highspeed Dual Role Controller'
 10	depends on (USB || USB_GADGET)
 11	depends on HAS_IOMEM
 
 
 
 
 12	help
 13	  Say Y here if your system has a dual role high speed USB
 14	  controller based on the Mentor Graphics silicon IP.  Then
 15	  configure options to match your silicon and the board
 16	  it's being used with, including the USB peripheral role,
 17	  or the USB host role, or both.
 18
 19	  Texas Instruments families using this IP include DaVinci
 20	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 21
 22	  Allwinner SoCs using this IP include A10, A13, A20, ...
 
 23
 24	  If you do not know what this is, please say N.
 25
 26	  To compile this driver as a module, choose M here; the
 27	  module will be called "musb-hdrc".
 28
 29if USB_MUSB_HDRC
 30
 31choice
 32	bool "MUSB Mode Selection"
 33	default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
 34	default USB_MUSB_HOST if (USB && !USB_GADGET)
 35	default USB_MUSB_GADGET if (!USB && USB_GADGET)
 36
 37config USB_MUSB_HOST
 38	bool "Host only mode"
 39	depends on USB=y || USB=USB_MUSB_HDRC
 40	help
 41	  Select this when you want to use MUSB in host mode only,
 42	  thereby the gadget feature will be regressed.
 43
 44config USB_MUSB_GADGET
 45	bool "Gadget only mode"
 46	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
 47	depends on HAS_DMA
 48	help
 49	  Select this when you want to use MUSB in gadget mode only,
 50	  thereby the host feature will be regressed.
 51
 52config USB_MUSB_DUAL_ROLE
 53	bool "Dual Role mode"
 54	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
 55	depends on HAS_DMA
 56	help
 57	  This is the default mode of working of MUSB controller where
 58	  both host and gadget features are enabled.
 59
 60endchoice
 61
 62comment "Platform Glue Layer"
 63
 64config USB_MUSB_SUNXI
 65	tristate "Allwinner (sunxi)"
 66	depends on ARCH_SUNXI
 67	depends on NOP_USB_XCEIV
 68	depends on PHY_SUN4I_USB
 69	depends on EXTCON
 70	select GENERIC_PHY
 71	select SUNXI_SRAM
 72
 73config USB_MUSB_DAVINCI
 74	tristate "DaVinci"
 75	depends on ARCH_DAVINCI_DMx
 76	depends on NOP_USB_XCEIV
 77	depends on BROKEN
 78
 79config USB_MUSB_DA8XX
 80	tristate "DA8xx/OMAP-L1x"
 81	depends on ARCH_DAVINCI_DA8XX
 82	depends on NOP_USB_XCEIV
 83	select PHY_DA8XX_USB
 84
 85config USB_MUSB_TUSB6010
 86	tristate "TUSB6010"
 87	depends on HAS_IOMEM
 88	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 89	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 90
 91config USB_MUSB_OMAP2PLUS
 92	tristate "OMAP2430 and onwards"
 93	depends on ARCH_OMAP2PLUS && USB
 94	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
 95	select GENERIC_PHY
 96
 97config USB_MUSB_AM35X
 98	tristate "AM35x"
 99	depends on ARCH_OMAP
100	depends on NOP_USB_XCEIV
101
102config USB_MUSB_DSPS
103	tristate "TI DSPS platforms"
104	depends on ARCH_OMAP2PLUS || COMPILE_TEST
105	depends on OF_IRQ
106
107config USB_MUSB_UX500
108	tristate "Ux500 platforms"
109	depends on ARCH_U8500 || COMPILE_TEST
110
111config USB_MUSB_JZ4740
112	tristate "JZ4740"
113	depends on OF
114	depends on MIPS || COMPILE_TEST
115	depends on USB_MUSB_GADGET
116	depends on USB=n || USB_OTG_DISABLE_EXTERNAL_HUB
117	select USB_ROLE_SWITCH
118
119config USB_MUSB_MEDIATEK
120	tristate "MediaTek platforms"
121	depends on ARCH_MEDIATEK || COMPILE_TEST
122	depends on NOP_USB_XCEIV
123	depends on GENERIC_PHY
124	select USB_ROLE_SWITCH
125
126comment "MUSB DMA mode"
127
128config MUSB_PIO_ONLY
129	bool 'Disable DMA (always use PIO)'
 
 
130	help
131	  All data is copied between memory and FIFO by the CPU.
132	  DMA controllers are ignored.
133
134	  Do not choose this unless DMA support for your SOC or board
135	  is unavailable (or unstable).  When DMA is enabled at compile time,
136	  you can still disable it at run time using the "use_dma=n" module
137	  parameter.
138
139if !MUSB_PIO_ONLY
140
141config USB_UX500_DMA
142	bool 'ST Ericsson Ux500'
143	depends on USB_MUSB_UX500
 
144	help
145	  Enable DMA transfers on UX500 platforms.
146
147config USB_INVENTRA_DMA
148	bool 'Inventra'
149	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740
 
150	help
151	  Enable DMA transfers using Mentor's engine.
152
153config USB_TI_CPPI_DMA
154	bool 'TI CPPI (Davinci)'
155	depends on USB_MUSB_DAVINCI
 
156	help
157	  Enable DMA transfers when TI CPPI DMA is available.
158
159config USB_TI_CPPI41_DMA
160	bool 'TI CPPI 4.1'
161	depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
162	select TI_CPPI41
163
164config USB_TUSB_OMAP_DMA
165	bool 'TUSB 6010'
166	depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
 
167	depends on ARCH_OMAP
 
168	help
169	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
170
171endif # !MUSB_PIO_ONLY
172
173endif # USB_MUSB_HDRC