Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * RDA8810PL serial device driver
4 *
5 * Copyright RDA Microelectronics Company Limited
6 * Copyright (c) 2017 Andreas Färber
7 * Copyright (c) 2018 Manivannan Sadhasivam
8 */
9
10#include <linux/clk.h>
11#include <linux/console.h>
12#include <linux/delay.h>
13#include <linux/io.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/platform_device.h>
17#include <linux/serial.h>
18#include <linux/serial_core.h>
19#include <linux/tty.h>
20#include <linux/tty_flip.h>
21
22#define RDA_UART_PORT_NUM 3
23#define RDA_UART_DEV_NAME "ttyRDA"
24
25#define RDA_UART_CTRL 0x00
26#define RDA_UART_STATUS 0x04
27#define RDA_UART_RXTX_BUFFER 0x08
28#define RDA_UART_IRQ_MASK 0x0c
29#define RDA_UART_IRQ_CAUSE 0x10
30#define RDA_UART_IRQ_TRIGGERS 0x14
31#define RDA_UART_CMD_SET 0x18
32#define RDA_UART_CMD_CLR 0x1c
33
34/* UART_CTRL Bits */
35#define RDA_UART_ENABLE BIT(0)
36#define RDA_UART_DBITS_8 BIT(1)
37#define RDA_UART_TX_SBITS_2 BIT(2)
38#define RDA_UART_PARITY_EN BIT(3)
39#define RDA_UART_PARITY(x) (((x) & 0x3) << 4)
40#define RDA_UART_PARITY_ODD RDA_UART_PARITY(0)
41#define RDA_UART_PARITY_EVEN RDA_UART_PARITY(1)
42#define RDA_UART_PARITY_SPACE RDA_UART_PARITY(2)
43#define RDA_UART_PARITY_MARK RDA_UART_PARITY(3)
44#define RDA_UART_DIV_MODE BIT(20)
45#define RDA_UART_IRDA_EN BIT(21)
46#define RDA_UART_DMA_EN BIT(22)
47#define RDA_UART_FLOW_CNT_EN BIT(23)
48#define RDA_UART_LOOP_BACK_EN BIT(24)
49#define RDA_UART_RX_LOCK_ERR BIT(25)
50#define RDA_UART_RX_BREAK_LEN(x) (((x) & 0xf) << 28)
51
52/* UART_STATUS Bits */
53#define RDA_UART_RX_FIFO(x) (((x) & 0x7f) << 0)
54#define RDA_UART_RX_FIFO_MASK (0x7f << 0)
55#define RDA_UART_TX_FIFO(x) (((x) & 0x1f) << 8)
56#define RDA_UART_TX_FIFO_MASK (0x1f << 8)
57#define RDA_UART_TX_ACTIVE BIT(14)
58#define RDA_UART_RX_ACTIVE BIT(15)
59#define RDA_UART_RX_OVERFLOW_ERR BIT(16)
60#define RDA_UART_TX_OVERFLOW_ERR BIT(17)
61#define RDA_UART_RX_PARITY_ERR BIT(18)
62#define RDA_UART_RX_FRAMING_ERR BIT(19)
63#define RDA_UART_RX_BREAK_INT BIT(20)
64#define RDA_UART_DCTS BIT(24)
65#define RDA_UART_CTS BIT(25)
66#define RDA_UART_DTR BIT(28)
67#define RDA_UART_CLK_ENABLED BIT(31)
68
69/* UART_RXTX_BUFFER Bits */
70#define RDA_UART_RX_DATA(x) (((x) & 0xff) << 0)
71#define RDA_UART_TX_DATA(x) (((x) & 0xff) << 0)
72
73/* UART_IRQ_MASK Bits */
74#define RDA_UART_TX_MODEM_STATUS BIT(0)
75#define RDA_UART_RX_DATA_AVAILABLE BIT(1)
76#define RDA_UART_TX_DATA_NEEDED BIT(2)
77#define RDA_UART_RX_TIMEOUT BIT(3)
78#define RDA_UART_RX_LINE_ERR BIT(4)
79#define RDA_UART_TX_DMA_DONE BIT(5)
80#define RDA_UART_RX_DMA_DONE BIT(6)
81#define RDA_UART_RX_DMA_TIMEOUT BIT(7)
82#define RDA_UART_DTR_RISE BIT(8)
83#define RDA_UART_DTR_FALL BIT(9)
84
85/* UART_IRQ_CAUSE Bits */
86#define RDA_UART_TX_MODEM_STATUS_U BIT(16)
87#define RDA_UART_RX_DATA_AVAILABLE_U BIT(17)
88#define RDA_UART_TX_DATA_NEEDED_U BIT(18)
89#define RDA_UART_RX_TIMEOUT_U BIT(19)
90#define RDA_UART_RX_LINE_ERR_U BIT(20)
91#define RDA_UART_TX_DMA_DONE_U BIT(21)
92#define RDA_UART_RX_DMA_DONE_U BIT(22)
93#define RDA_UART_RX_DMA_TIMEOUT_U BIT(23)
94#define RDA_UART_DTR_RISE_U BIT(24)
95#define RDA_UART_DTR_FALL_U BIT(25)
96
97/* UART_TRIGGERS Bits */
98#define RDA_UART_RX_TRIGGER(x) (((x) & 0x1f) << 0)
99#define RDA_UART_TX_TRIGGER(x) (((x) & 0xf) << 8)
100#define RDA_UART_AFC_LEVEL(x) (((x) & 0x1f) << 16)
101
102/* UART_CMD_SET Bits */
103#define RDA_UART_RI BIT(0)
104#define RDA_UART_DCD BIT(1)
105#define RDA_UART_DSR BIT(2)
106#define RDA_UART_TX_BREAK_CONTROL BIT(3)
107#define RDA_UART_TX_FINISH_N_WAIT BIT(4)
108#define RDA_UART_RTS BIT(5)
109#define RDA_UART_RX_FIFO_RESET BIT(6)
110#define RDA_UART_TX_FIFO_RESET BIT(7)
111
112#define RDA_UART_TX_FIFO_SIZE 16
113
114static struct uart_driver rda_uart_driver;
115
116struct rda_uart_port {
117 struct uart_port port;
118 struct clk *clk;
119};
120
121#define to_rda_uart_port(port) container_of(port, struct rda_uart_port, port)
122
123static struct rda_uart_port *rda_uart_ports[RDA_UART_PORT_NUM];
124
125static inline void rda_uart_write(struct uart_port *port, u32 val,
126 unsigned int off)
127{
128 writel(val, port->membase + off);
129}
130
131static inline u32 rda_uart_read(struct uart_port *port, unsigned int off)
132{
133 return readl(port->membase + off);
134}
135
136static unsigned int rda_uart_tx_empty(struct uart_port *port)
137{
138 unsigned long flags;
139 unsigned int ret;
140 u32 val;
141
142 spin_lock_irqsave(&port->lock, flags);
143
144 val = rda_uart_read(port, RDA_UART_STATUS);
145 ret = (val & RDA_UART_TX_FIFO_MASK) ? TIOCSER_TEMT : 0;
146
147 spin_unlock_irqrestore(&port->lock, flags);
148
149 return ret;
150}
151
152static unsigned int rda_uart_get_mctrl(struct uart_port *port)
153{
154 unsigned int mctrl = 0;
155 u32 cmd_set, status;
156
157 cmd_set = rda_uart_read(port, RDA_UART_CMD_SET);
158 status = rda_uart_read(port, RDA_UART_STATUS);
159 if (cmd_set & RDA_UART_RTS)
160 mctrl |= TIOCM_RTS;
161 if (!(status & RDA_UART_CTS))
162 mctrl |= TIOCM_CTS;
163
164 return mctrl;
165}
166
167static void rda_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
168{
169 u32 val;
170
171 if (mctrl & TIOCM_RTS) {
172 val = rda_uart_read(port, RDA_UART_CMD_SET);
173 rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_SET);
174 } else {
175 /* Clear RTS to stop to receive. */
176 val = rda_uart_read(port, RDA_UART_CMD_CLR);
177 rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_CLR);
178 }
179
180 val = rda_uart_read(port, RDA_UART_CTRL);
181
182 if (mctrl & TIOCM_LOOP)
183 val |= RDA_UART_LOOP_BACK_EN;
184 else
185 val &= ~RDA_UART_LOOP_BACK_EN;
186
187 rda_uart_write(port, val, RDA_UART_CTRL);
188}
189
190static void rda_uart_stop_tx(struct uart_port *port)
191{
192 u32 val;
193
194 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
195 val &= ~RDA_UART_TX_DATA_NEEDED;
196 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
197
198 val = rda_uart_read(port, RDA_UART_CMD_SET);
199 val |= RDA_UART_TX_FIFO_RESET;
200 rda_uart_write(port, val, RDA_UART_CMD_SET);
201}
202
203static void rda_uart_stop_rx(struct uart_port *port)
204{
205 u32 val;
206
207 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
208 val &= ~(RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT);
209 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
210
211 /* Read Rx buffer before reset to avoid Rx timeout interrupt */
212 val = rda_uart_read(port, RDA_UART_RXTX_BUFFER);
213
214 val = rda_uart_read(port, RDA_UART_CMD_SET);
215 val |= RDA_UART_RX_FIFO_RESET;
216 rda_uart_write(port, val, RDA_UART_CMD_SET);
217}
218
219static void rda_uart_start_tx(struct uart_port *port)
220{
221 u32 val;
222
223 if (uart_tx_stopped(port)) {
224 rda_uart_stop_tx(port);
225 return;
226 }
227
228 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
229 val |= RDA_UART_TX_DATA_NEEDED;
230 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
231}
232
233static void rda_uart_change_baudrate(struct rda_uart_port *rda_port,
234 unsigned long baud)
235{
236 clk_set_rate(rda_port->clk, baud * 8);
237}
238
239static void rda_uart_set_termios(struct uart_port *port,
240 struct ktermios *termios,
241 struct ktermios *old)
242{
243 struct rda_uart_port *rda_port = to_rda_uart_port(port);
244 unsigned long flags;
245 unsigned int ctrl, cmd_set, cmd_clr, triggers;
246 unsigned int baud;
247 u32 irq_mask;
248
249 spin_lock_irqsave(&port->lock, flags);
250
251 baud = uart_get_baud_rate(port, termios, old, 9600, port->uartclk / 4);
252 rda_uart_change_baudrate(rda_port, baud);
253
254 ctrl = rda_uart_read(port, RDA_UART_CTRL);
255 cmd_set = rda_uart_read(port, RDA_UART_CMD_SET);
256 cmd_clr = rda_uart_read(port, RDA_UART_CMD_CLR);
257
258 switch (termios->c_cflag & CSIZE) {
259 case CS5:
260 case CS6:
261 dev_warn(port->dev, "bit size not supported, using 7 bits\n");
262 fallthrough;
263 case CS7:
264 ctrl &= ~RDA_UART_DBITS_8;
265 break;
266 default:
267 ctrl |= RDA_UART_DBITS_8;
268 break;
269 }
270
271 /* stop bits */
272 if (termios->c_cflag & CSTOPB)
273 ctrl |= RDA_UART_TX_SBITS_2;
274 else
275 ctrl &= ~RDA_UART_TX_SBITS_2;
276
277 /* parity check */
278 if (termios->c_cflag & PARENB) {
279 ctrl |= RDA_UART_PARITY_EN;
280
281 /* Mark or Space parity */
282 if (termios->c_cflag & CMSPAR) {
283 if (termios->c_cflag & PARODD)
284 ctrl |= RDA_UART_PARITY_MARK;
285 else
286 ctrl |= RDA_UART_PARITY_SPACE;
287 } else if (termios->c_cflag & PARODD) {
288 ctrl |= RDA_UART_PARITY_ODD;
289 } else {
290 ctrl |= RDA_UART_PARITY_EVEN;
291 }
292 } else {
293 ctrl &= ~RDA_UART_PARITY_EN;
294 }
295
296 /* Hardware handshake (RTS/CTS) */
297 if (termios->c_cflag & CRTSCTS) {
298 ctrl |= RDA_UART_FLOW_CNT_EN;
299 cmd_set |= RDA_UART_RTS;
300 } else {
301 ctrl &= ~RDA_UART_FLOW_CNT_EN;
302 cmd_clr |= RDA_UART_RTS;
303 }
304
305 ctrl |= RDA_UART_ENABLE;
306 ctrl &= ~RDA_UART_DMA_EN;
307
308 triggers = (RDA_UART_AFC_LEVEL(20) | RDA_UART_RX_TRIGGER(16));
309 irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
310 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
311
312 rda_uart_write(port, triggers, RDA_UART_IRQ_TRIGGERS);
313 rda_uart_write(port, ctrl, RDA_UART_CTRL);
314 rda_uart_write(port, cmd_set, RDA_UART_CMD_SET);
315 rda_uart_write(port, cmd_clr, RDA_UART_CMD_CLR);
316
317 rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK);
318
319 /* Don't rewrite B0 */
320 if (tty_termios_baud_rate(termios))
321 tty_termios_encode_baud_rate(termios, baud, baud);
322
323 /* update the per-port timeout */
324 uart_update_timeout(port, termios->c_cflag, baud);
325
326 spin_unlock_irqrestore(&port->lock, flags);
327}
328
329static void rda_uart_send_chars(struct uart_port *port)
330{
331 struct circ_buf *xmit = &port->state->xmit;
332 unsigned int ch;
333 u32 val;
334
335 if (uart_tx_stopped(port))
336 return;
337
338 if (port->x_char) {
339 while (!(rda_uart_read(port, RDA_UART_STATUS) &
340 RDA_UART_TX_FIFO_MASK))
341 cpu_relax();
342
343 rda_uart_write(port, port->x_char, RDA_UART_RXTX_BUFFER);
344 port->icount.tx++;
345 port->x_char = 0;
346 }
347
348 while (rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) {
349 if (uart_circ_empty(xmit))
350 break;
351
352 ch = xmit->buf[xmit->tail];
353 rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
354 xmit->tail = (xmit->tail + 1) & (SERIAL_XMIT_SIZE - 1);
355 port->icount.tx++;
356 }
357
358 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
359 uart_write_wakeup(port);
360
361 if (!uart_circ_empty(xmit)) {
362 /* Re-enable Tx FIFO interrupt */
363 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
364 val |= RDA_UART_TX_DATA_NEEDED;
365 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
366 }
367}
368
369static void rda_uart_receive_chars(struct uart_port *port)
370{
371 u32 status, val;
372
373 status = rda_uart_read(port, RDA_UART_STATUS);
374 while ((status & RDA_UART_RX_FIFO_MASK)) {
375 char flag = TTY_NORMAL;
376
377 if (status & RDA_UART_RX_PARITY_ERR) {
378 port->icount.parity++;
379 flag = TTY_PARITY;
380 }
381
382 if (status & RDA_UART_RX_FRAMING_ERR) {
383 port->icount.frame++;
384 flag = TTY_FRAME;
385 }
386
387 if (status & RDA_UART_RX_OVERFLOW_ERR) {
388 port->icount.overrun++;
389 flag = TTY_OVERRUN;
390 }
391
392 val = rda_uart_read(port, RDA_UART_RXTX_BUFFER);
393 val &= 0xff;
394
395 port->icount.rx++;
396 tty_insert_flip_char(&port->state->port, val, flag);
397
398 status = rda_uart_read(port, RDA_UART_STATUS);
399 }
400
401 tty_flip_buffer_push(&port->state->port);
402}
403
404static irqreturn_t rda_interrupt(int irq, void *dev_id)
405{
406 struct uart_port *port = dev_id;
407 unsigned long flags;
408 u32 val, irq_mask;
409
410 spin_lock_irqsave(&port->lock, flags);
411
412 /* Clear IRQ cause */
413 val = rda_uart_read(port, RDA_UART_IRQ_CAUSE);
414 rda_uart_write(port, val, RDA_UART_IRQ_CAUSE);
415
416 if (val & (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT))
417 rda_uart_receive_chars(port);
418
419 if (val & (RDA_UART_TX_DATA_NEEDED)) {
420 irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
421 irq_mask &= ~RDA_UART_TX_DATA_NEEDED;
422 rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK);
423
424 rda_uart_send_chars(port);
425 }
426
427 spin_unlock_irqrestore(&port->lock, flags);
428
429 return IRQ_HANDLED;
430}
431
432static int rda_uart_startup(struct uart_port *port)
433{
434 unsigned long flags;
435 int ret;
436 u32 val;
437
438 spin_lock_irqsave(&port->lock, flags);
439 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
440 spin_unlock_irqrestore(&port->lock, flags);
441
442 ret = request_irq(port->irq, rda_interrupt, IRQF_NO_SUSPEND,
443 "rda-uart", port);
444 if (ret)
445 return ret;
446
447 spin_lock_irqsave(&port->lock, flags);
448
449 val = rda_uart_read(port, RDA_UART_CTRL);
450 val |= RDA_UART_ENABLE;
451 rda_uart_write(port, val, RDA_UART_CTRL);
452
453 /* enable rx interrupt */
454 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
455 val |= (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT);
456 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
457
458 spin_unlock_irqrestore(&port->lock, flags);
459
460 return 0;
461}
462
463static void rda_uart_shutdown(struct uart_port *port)
464{
465 unsigned long flags;
466 u32 val;
467
468 spin_lock_irqsave(&port->lock, flags);
469
470 rda_uart_stop_tx(port);
471 rda_uart_stop_rx(port);
472
473 val = rda_uart_read(port, RDA_UART_CTRL);
474 val &= ~RDA_UART_ENABLE;
475 rda_uart_write(port, val, RDA_UART_CTRL);
476
477 spin_unlock_irqrestore(&port->lock, flags);
478}
479
480static const char *rda_uart_type(struct uart_port *port)
481{
482 return (port->type == PORT_RDA) ? "rda-uart" : NULL;
483}
484
485static int rda_uart_request_port(struct uart_port *port)
486{
487 struct platform_device *pdev = to_platform_device(port->dev);
488 struct resource *res;
489
490 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
491 if (!res)
492 return -ENXIO;
493
494 if (!devm_request_mem_region(port->dev, port->mapbase,
495 resource_size(res), dev_name(port->dev)))
496 return -EBUSY;
497
498 if (port->flags & UPF_IOREMAP) {
499 port->membase = devm_ioremap(port->dev, port->mapbase,
500 resource_size(res));
501 if (!port->membase)
502 return -EBUSY;
503 }
504
505 return 0;
506}
507
508static void rda_uart_config_port(struct uart_port *port, int flags)
509{
510 unsigned long irq_flags;
511
512 if (flags & UART_CONFIG_TYPE) {
513 port->type = PORT_RDA;
514 rda_uart_request_port(port);
515 }
516
517 spin_lock_irqsave(&port->lock, irq_flags);
518
519 /* Clear mask, so no surprise interrupts. */
520 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
521
522 /* Clear status register */
523 rda_uart_write(port, 0, RDA_UART_STATUS);
524
525 spin_unlock_irqrestore(&port->lock, irq_flags);
526}
527
528static void rda_uart_release_port(struct uart_port *port)
529{
530 struct platform_device *pdev = to_platform_device(port->dev);
531 struct resource *res;
532
533 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
534 if (!res)
535 return;
536
537 if (port->flags & UPF_IOREMAP) {
538 devm_release_mem_region(port->dev, port->mapbase,
539 resource_size(res));
540 devm_iounmap(port->dev, port->membase);
541 port->membase = NULL;
542 }
543}
544
545static int rda_uart_verify_port(struct uart_port *port,
546 struct serial_struct *ser)
547{
548 if (port->type != PORT_RDA)
549 return -EINVAL;
550
551 if (port->irq != ser->irq)
552 return -EINVAL;
553
554 return 0;
555}
556
557static const struct uart_ops rda_uart_ops = {
558 .tx_empty = rda_uart_tx_empty,
559 .get_mctrl = rda_uart_get_mctrl,
560 .set_mctrl = rda_uart_set_mctrl,
561 .start_tx = rda_uart_start_tx,
562 .stop_tx = rda_uart_stop_tx,
563 .stop_rx = rda_uart_stop_rx,
564 .startup = rda_uart_startup,
565 .shutdown = rda_uart_shutdown,
566 .set_termios = rda_uart_set_termios,
567 .type = rda_uart_type,
568 .request_port = rda_uart_request_port,
569 .release_port = rda_uart_release_port,
570 .config_port = rda_uart_config_port,
571 .verify_port = rda_uart_verify_port,
572};
573
574#ifdef CONFIG_SERIAL_RDA_CONSOLE
575
576static void rda_console_putchar(struct uart_port *port, int ch)
577{
578 if (!port->membase)
579 return;
580
581 while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK))
582 cpu_relax();
583
584 rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
585}
586
587static void rda_uart_port_write(struct uart_port *port, const char *s,
588 u_int count)
589{
590 u32 old_irq_mask;
591 unsigned long flags;
592 int locked;
593
594 local_irq_save(flags);
595
596 if (port->sysrq) {
597 locked = 0;
598 } else if (oops_in_progress) {
599 locked = spin_trylock(&port->lock);
600 } else {
601 spin_lock(&port->lock);
602 locked = 1;
603 }
604
605 old_irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
606 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
607
608 uart_console_write(port, s, count, rda_console_putchar);
609
610 /* wait until all contents have been sent out */
611 while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK))
612 cpu_relax();
613
614 rda_uart_write(port, old_irq_mask, RDA_UART_IRQ_MASK);
615
616 if (locked)
617 spin_unlock(&port->lock);
618
619 local_irq_restore(flags);
620}
621
622static void rda_uart_console_write(struct console *co, const char *s,
623 u_int count)
624{
625 struct rda_uart_port *rda_port;
626
627 rda_port = rda_uart_ports[co->index];
628 if (!rda_port)
629 return;
630
631 rda_uart_port_write(&rda_port->port, s, count);
632}
633
634static int rda_uart_console_setup(struct console *co, char *options)
635{
636 struct rda_uart_port *rda_port;
637 int baud = 921600;
638 int bits = 8;
639 int parity = 'n';
640 int flow = 'n';
641
642 if (co->index < 0 || co->index >= RDA_UART_PORT_NUM)
643 return -EINVAL;
644
645 rda_port = rda_uart_ports[co->index];
646 if (!rda_port || !rda_port->port.membase)
647 return -ENODEV;
648
649 if (options)
650 uart_parse_options(options, &baud, &parity, &bits, &flow);
651
652 return uart_set_options(&rda_port->port, co, baud, parity, bits, flow);
653}
654
655static struct console rda_uart_console = {
656 .name = RDA_UART_DEV_NAME,
657 .write = rda_uart_console_write,
658 .device = uart_console_device,
659 .setup = rda_uart_console_setup,
660 .flags = CON_PRINTBUFFER,
661 .index = -1,
662 .data = &rda_uart_driver,
663};
664
665static int __init rda_uart_console_init(void)
666{
667 register_console(&rda_uart_console);
668
669 return 0;
670}
671console_initcall(rda_uart_console_init);
672
673static void rda_uart_early_console_write(struct console *co,
674 const char *s,
675 u_int count)
676{
677 struct earlycon_device *dev = co->data;
678
679 rda_uart_port_write(&dev->port, s, count);
680}
681
682static int __init
683rda_uart_early_console_setup(struct earlycon_device *device, const char *opt)
684{
685 if (!device->port.membase)
686 return -ENODEV;
687
688 device->con->write = rda_uart_early_console_write;
689
690 return 0;
691}
692
693OF_EARLYCON_DECLARE(rda, "rda,8810pl-uart",
694 rda_uart_early_console_setup);
695
696#define RDA_UART_CONSOLE (&rda_uart_console)
697#else
698#define RDA_UART_CONSOLE NULL
699#endif /* CONFIG_SERIAL_RDA_CONSOLE */
700
701static struct uart_driver rda_uart_driver = {
702 .owner = THIS_MODULE,
703 .driver_name = "rda-uart",
704 .dev_name = RDA_UART_DEV_NAME,
705 .nr = RDA_UART_PORT_NUM,
706 .cons = RDA_UART_CONSOLE,
707};
708
709static const struct of_device_id rda_uart_dt_matches[] = {
710 { .compatible = "rda,8810pl-uart" },
711 { }
712};
713MODULE_DEVICE_TABLE(of, rda_uart_dt_matches);
714
715static int rda_uart_probe(struct platform_device *pdev)
716{
717 struct resource *res_mem;
718 struct rda_uart_port *rda_port;
719 int ret, irq;
720
721 if (pdev->dev.of_node)
722 pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
723
724 if (pdev->id < 0 || pdev->id >= RDA_UART_PORT_NUM) {
725 dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
726 return -EINVAL;
727 }
728
729 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
730 if (!res_mem) {
731 dev_err(&pdev->dev, "could not get mem\n");
732 return -ENODEV;
733 }
734
735 irq = platform_get_irq(pdev, 0);
736 if (irq < 0)
737 return irq;
738
739 if (rda_uart_ports[pdev->id]) {
740 dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
741 return -EBUSY;
742 }
743
744 rda_port = devm_kzalloc(&pdev->dev, sizeof(*rda_port), GFP_KERNEL);
745 if (!rda_port)
746 return -ENOMEM;
747
748 rda_port->clk = devm_clk_get(&pdev->dev, NULL);
749 if (IS_ERR(rda_port->clk)) {
750 dev_err(&pdev->dev, "could not get clk\n");
751 return PTR_ERR(rda_port->clk);
752 }
753
754 rda_port->port.dev = &pdev->dev;
755 rda_port->port.regshift = 0;
756 rda_port->port.line = pdev->id;
757 rda_port->port.type = PORT_RDA;
758 rda_port->port.iotype = UPIO_MEM;
759 rda_port->port.mapbase = res_mem->start;
760 rda_port->port.irq = irq;
761 rda_port->port.uartclk = clk_get_rate(rda_port->clk);
762 if (rda_port->port.uartclk == 0) {
763 dev_err(&pdev->dev, "clock rate is zero\n");
764 return -EINVAL;
765 }
766 rda_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
767 UPF_LOW_LATENCY;
768 rda_port->port.x_char = 0;
769 rda_port->port.fifosize = RDA_UART_TX_FIFO_SIZE;
770 rda_port->port.ops = &rda_uart_ops;
771
772 rda_uart_ports[pdev->id] = rda_port;
773 platform_set_drvdata(pdev, rda_port);
774
775 ret = uart_add_one_port(&rda_uart_driver, &rda_port->port);
776 if (ret)
777 rda_uart_ports[pdev->id] = NULL;
778
779 return ret;
780}
781
782static int rda_uart_remove(struct platform_device *pdev)
783{
784 struct rda_uart_port *rda_port = platform_get_drvdata(pdev);
785
786 uart_remove_one_port(&rda_uart_driver, &rda_port->port);
787 rda_uart_ports[pdev->id] = NULL;
788
789 return 0;
790}
791
792static struct platform_driver rda_uart_platform_driver = {
793 .probe = rda_uart_probe,
794 .remove = rda_uart_remove,
795 .driver = {
796 .name = "rda-uart",
797 .of_match_table = rda_uart_dt_matches,
798 },
799};
800
801static int __init rda_uart_init(void)
802{
803 int ret;
804
805 ret = uart_register_driver(&rda_uart_driver);
806 if (ret)
807 return ret;
808
809 ret = platform_driver_register(&rda_uart_platform_driver);
810 if (ret)
811 uart_unregister_driver(&rda_uart_driver);
812
813 return ret;
814}
815
816static void __exit rda_uart_exit(void)
817{
818 platform_driver_unregister(&rda_uart_platform_driver);
819 uart_unregister_driver(&rda_uart_driver);
820}
821
822module_init(rda_uart_init);
823module_exit(rda_uart_exit);
824
825MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
826MODULE_DESCRIPTION("RDA8810PL serial device driver");
827MODULE_LICENSE("GPL");