Loading...
1/*
2 * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
3 * M (part of the Centrino chipset).
4 *
5 * Since the original Pentium M, most new Intel CPUs support Enhanced
6 * SpeedStep.
7 *
8 * Despite the "SpeedStep" in the name, this is almost entirely unlike
9 * traditional SpeedStep.
10 *
11 * Modelled on speedstep.c
12 *
13 * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
14 */
15
16#include <linux/kernel.h>
17#include <linux/module.h>
18#include <linux/init.h>
19#include <linux/cpufreq.h>
20#include <linux/sched.h> /* current */
21#include <linux/delay.h>
22#include <linux/compiler.h>
23#include <linux/gfp.h>
24
25#include <asm/msr.h>
26#include <asm/processor.h>
27#include <asm/cpufeature.h>
28
29#define PFX "speedstep-centrino: "
30#define MAINTAINER "cpufreq@vger.kernel.org"
31
32#define INTEL_MSR_RANGE (0xffff)
33
34struct cpu_id
35{
36 __u8 x86; /* CPU family */
37 __u8 x86_model; /* model */
38 __u8 x86_mask; /* stepping */
39};
40
41enum {
42 CPU_BANIAS,
43 CPU_DOTHAN_A1,
44 CPU_DOTHAN_A2,
45 CPU_DOTHAN_B0,
46 CPU_MP4HT_D0,
47 CPU_MP4HT_E0,
48};
49
50static const struct cpu_id cpu_ids[] = {
51 [CPU_BANIAS] = { 6, 9, 5 },
52 [CPU_DOTHAN_A1] = { 6, 13, 1 },
53 [CPU_DOTHAN_A2] = { 6, 13, 2 },
54 [CPU_DOTHAN_B0] = { 6, 13, 6 },
55 [CPU_MP4HT_D0] = {15, 3, 4 },
56 [CPU_MP4HT_E0] = {15, 4, 1 },
57};
58#define N_IDS ARRAY_SIZE(cpu_ids)
59
60struct cpu_model
61{
62 const struct cpu_id *cpu_id;
63 const char *model_name;
64 unsigned max_freq; /* max clock in kHz */
65
66 struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
67};
68static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
69 const struct cpu_id *x);
70
71/* Operating points for current CPU */
72static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
73static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
74
75static struct cpufreq_driver centrino_driver;
76
77#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
78
79/* Computes the correct form for IA32_PERF_CTL MSR for a particular
80 frequency/voltage operating point; frequency in MHz, volts in mV.
81 This is stored as "index" in the structure. */
82#define OP(mhz, mv) \
83 { \
84 .frequency = (mhz) * 1000, \
85 .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \
86 }
87
88/*
89 * These voltage tables were derived from the Intel Pentium M
90 * datasheet, document 25261202.pdf, Table 5. I have verified they
91 * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
92 * M.
93 */
94
95/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
96static struct cpufreq_frequency_table banias_900[] =
97{
98 OP(600, 844),
99 OP(800, 988),
100 OP(900, 1004),
101 { .frequency = CPUFREQ_TABLE_END }
102};
103
104/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
105static struct cpufreq_frequency_table banias_1000[] =
106{
107 OP(600, 844),
108 OP(800, 972),
109 OP(900, 988),
110 OP(1000, 1004),
111 { .frequency = CPUFREQ_TABLE_END }
112};
113
114/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
115static struct cpufreq_frequency_table banias_1100[] =
116{
117 OP( 600, 956),
118 OP( 800, 1020),
119 OP( 900, 1100),
120 OP(1000, 1164),
121 OP(1100, 1180),
122 { .frequency = CPUFREQ_TABLE_END }
123};
124
125
126/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
127static struct cpufreq_frequency_table banias_1200[] =
128{
129 OP( 600, 956),
130 OP( 800, 1004),
131 OP( 900, 1020),
132 OP(1000, 1100),
133 OP(1100, 1164),
134 OP(1200, 1180),
135 { .frequency = CPUFREQ_TABLE_END }
136};
137
138/* Intel Pentium M processor 1.30GHz (Banias) */
139static struct cpufreq_frequency_table banias_1300[] =
140{
141 OP( 600, 956),
142 OP( 800, 1260),
143 OP(1000, 1292),
144 OP(1200, 1356),
145 OP(1300, 1388),
146 { .frequency = CPUFREQ_TABLE_END }
147};
148
149/* Intel Pentium M processor 1.40GHz (Banias) */
150static struct cpufreq_frequency_table banias_1400[] =
151{
152 OP( 600, 956),
153 OP( 800, 1180),
154 OP(1000, 1308),
155 OP(1200, 1436),
156 OP(1400, 1484),
157 { .frequency = CPUFREQ_TABLE_END }
158};
159
160/* Intel Pentium M processor 1.50GHz (Banias) */
161static struct cpufreq_frequency_table banias_1500[] =
162{
163 OP( 600, 956),
164 OP( 800, 1116),
165 OP(1000, 1228),
166 OP(1200, 1356),
167 OP(1400, 1452),
168 OP(1500, 1484),
169 { .frequency = CPUFREQ_TABLE_END }
170};
171
172/* Intel Pentium M processor 1.60GHz (Banias) */
173static struct cpufreq_frequency_table banias_1600[] =
174{
175 OP( 600, 956),
176 OP( 800, 1036),
177 OP(1000, 1164),
178 OP(1200, 1276),
179 OP(1400, 1420),
180 OP(1600, 1484),
181 { .frequency = CPUFREQ_TABLE_END }
182};
183
184/* Intel Pentium M processor 1.70GHz (Banias) */
185static struct cpufreq_frequency_table banias_1700[] =
186{
187 OP( 600, 956),
188 OP( 800, 1004),
189 OP(1000, 1116),
190 OP(1200, 1228),
191 OP(1400, 1308),
192 OP(1700, 1484),
193 { .frequency = CPUFREQ_TABLE_END }
194};
195#undef OP
196
197#define _BANIAS(cpuid, max, name) \
198{ .cpu_id = cpuid, \
199 .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \
200 .max_freq = (max)*1000, \
201 .op_points = banias_##max, \
202}
203#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
204
205/* CPU models, their operating frequency range, and freq/voltage
206 operating points */
207static struct cpu_model models[] =
208{
209 _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
210 BANIAS(1000),
211 BANIAS(1100),
212 BANIAS(1200),
213 BANIAS(1300),
214 BANIAS(1400),
215 BANIAS(1500),
216 BANIAS(1600),
217 BANIAS(1700),
218
219 /* NULL model_name is a wildcard */
220 { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
221 { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
222 { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
223 { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
224 { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
225
226 { NULL, }
227};
228#undef _BANIAS
229#undef BANIAS
230
231static int centrino_cpu_init_table(struct cpufreq_policy *policy)
232{
233 struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
234 struct cpu_model *model;
235
236 for(model = models; model->cpu_id != NULL; model++)
237 if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
238 (model->model_name == NULL ||
239 strcmp(cpu->x86_model_id, model->model_name) == 0))
240 break;
241
242 if (model->cpu_id == NULL) {
243 /* No match at all */
244 pr_debug("no support for CPU model \"%s\": "
245 "send /proc/cpuinfo to " MAINTAINER "\n",
246 cpu->x86_model_id);
247 return -ENOENT;
248 }
249
250 if (model->op_points == NULL) {
251 /* Matched a non-match */
252 pr_debug("no table support for CPU model \"%s\"\n",
253 cpu->x86_model_id);
254 pr_debug("try using the acpi-cpufreq driver\n");
255 return -ENOENT;
256 }
257
258 per_cpu(centrino_model, policy->cpu) = model;
259
260 pr_debug("found \"%s\": max frequency: %dkHz\n",
261 model->model_name, model->max_freq);
262
263 return 0;
264}
265
266#else
267static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
268{
269 return -ENODEV;
270}
271#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
272
273static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
274 const struct cpu_id *x)
275{
276 if ((c->x86 == x->x86) &&
277 (c->x86_model == x->x86_model) &&
278 (c->x86_mask == x->x86_mask))
279 return 1;
280 return 0;
281}
282
283/* To be called only after centrino_model is initialized */
284static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
285{
286 int i;
287
288 /*
289 * Extract clock in kHz from PERF_CTL value
290 * for centrino, as some DSDTs are buggy.
291 * Ideally, this can be done using the acpi_data structure.
292 */
293 if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
294 (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
295 (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
296 msr = (msr >> 8) & 0xff;
297 return msr * 100000;
298 }
299
300 if ((!per_cpu(centrino_model, cpu)) ||
301 (!per_cpu(centrino_model, cpu)->op_points))
302 return 0;
303
304 msr &= 0xffff;
305 for (i = 0;
306 per_cpu(centrino_model, cpu)->op_points[i].frequency
307 != CPUFREQ_TABLE_END;
308 i++) {
309 if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
310 return per_cpu(centrino_model, cpu)->
311 op_points[i].frequency;
312 }
313 if (failsafe)
314 return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
315 else
316 return 0;
317}
318
319/* Return the current CPU frequency in kHz */
320static unsigned int get_cur_freq(unsigned int cpu)
321{
322 unsigned l, h;
323 unsigned clock_freq;
324
325 rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
326 clock_freq = extract_clock(l, cpu, 0);
327
328 if (unlikely(clock_freq == 0)) {
329 /*
330 * On some CPUs, we can see transient MSR values (which are
331 * not present in _PSS), while CPU is doing some automatic
332 * P-state transition (like TM2). Get the last freq set
333 * in PERF_CTL.
334 */
335 rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
336 clock_freq = extract_clock(l, cpu, 1);
337 }
338 return clock_freq;
339}
340
341
342static int centrino_cpu_init(struct cpufreq_policy *policy)
343{
344 struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
345 unsigned freq;
346 unsigned l, h;
347 int ret;
348 int i;
349
350 /* Only Intel makes Enhanced Speedstep-capable CPUs */
351 if (cpu->x86_vendor != X86_VENDOR_INTEL ||
352 !cpu_has(cpu, X86_FEATURE_EST))
353 return -ENODEV;
354
355 if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
356 centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
357
358 if (policy->cpu != 0)
359 return -ENODEV;
360
361 for (i = 0; i < N_IDS; i++)
362 if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
363 break;
364
365 if (i != N_IDS)
366 per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
367
368 if (!per_cpu(centrino_cpu, policy->cpu)) {
369 pr_debug("found unsupported CPU with "
370 "Enhanced SpeedStep: send /proc/cpuinfo to "
371 MAINTAINER "\n");
372 return -ENODEV;
373 }
374
375 if (centrino_cpu_init_table(policy)) {
376 return -ENODEV;
377 }
378
379 /* Check to see if Enhanced SpeedStep is enabled, and try to
380 enable it if not. */
381 rdmsr(MSR_IA32_MISC_ENABLE, l, h);
382
383 if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
384 l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
385 pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
386 wrmsr(MSR_IA32_MISC_ENABLE, l, h);
387
388 /* check to see if it stuck */
389 rdmsr(MSR_IA32_MISC_ENABLE, l, h);
390 if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
391 printk(KERN_INFO PFX
392 "couldn't enable Enhanced SpeedStep\n");
393 return -ENODEV;
394 }
395 }
396
397 freq = get_cur_freq(policy->cpu);
398 policy->cpuinfo.transition_latency = 10000;
399 /* 10uS transition latency */
400 policy->cur = freq;
401
402 pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
403
404 ret = cpufreq_frequency_table_cpuinfo(policy,
405 per_cpu(centrino_model, policy->cpu)->op_points);
406 if (ret)
407 return (ret);
408
409 cpufreq_frequency_table_get_attr(
410 per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
411
412 return 0;
413}
414
415static int centrino_cpu_exit(struct cpufreq_policy *policy)
416{
417 unsigned int cpu = policy->cpu;
418
419 if (!per_cpu(centrino_model, cpu))
420 return -ENODEV;
421
422 cpufreq_frequency_table_put_attr(cpu);
423
424 per_cpu(centrino_model, cpu) = NULL;
425
426 return 0;
427}
428
429/**
430 * centrino_verify - verifies a new CPUFreq policy
431 * @policy: new policy
432 *
433 * Limit must be within this model's frequency range at least one
434 * border included.
435 */
436static int centrino_verify (struct cpufreq_policy *policy)
437{
438 return cpufreq_frequency_table_verify(policy,
439 per_cpu(centrino_model, policy->cpu)->op_points);
440}
441
442/**
443 * centrino_setpolicy - set a new CPUFreq policy
444 * @policy: new policy
445 * @target_freq: the target frequency
446 * @relation: how that frequency relates to achieved frequency
447 * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
448 *
449 * Sets a new CPUFreq policy.
450 */
451static int centrino_target (struct cpufreq_policy *policy,
452 unsigned int target_freq,
453 unsigned int relation)
454{
455 unsigned int newstate = 0;
456 unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu;
457 struct cpufreq_freqs freqs;
458 int retval = 0;
459 unsigned int j, k, first_cpu, tmp;
460 cpumask_var_t covered_cpus;
461
462 if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
463 return -ENOMEM;
464
465 if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
466 retval = -ENODEV;
467 goto out;
468 }
469
470 if (unlikely(cpufreq_frequency_table_target(policy,
471 per_cpu(centrino_model, cpu)->op_points,
472 target_freq,
473 relation,
474 &newstate))) {
475 retval = -EINVAL;
476 goto out;
477 }
478
479 first_cpu = 1;
480 for_each_cpu(j, policy->cpus) {
481 int good_cpu;
482
483 /* cpufreq holds the hotplug lock, so we are safe here */
484 if (!cpu_online(j))
485 continue;
486
487 /*
488 * Support for SMP systems.
489 * Make sure we are running on CPU that wants to change freq
490 */
491 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
492 good_cpu = cpumask_any_and(policy->cpus,
493 cpu_online_mask);
494 else
495 good_cpu = j;
496
497 if (good_cpu >= nr_cpu_ids) {
498 pr_debug("couldn't limit to CPUs in this domain\n");
499 retval = -EAGAIN;
500 if (first_cpu) {
501 /* We haven't started the transition yet. */
502 goto out;
503 }
504 break;
505 }
506
507 msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
508
509 if (first_cpu) {
510 rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
511 if (msr == (oldmsr & 0xffff)) {
512 pr_debug("no change needed - msr was and needs "
513 "to be %x\n", oldmsr);
514 retval = 0;
515 goto out;
516 }
517
518 freqs.old = extract_clock(oldmsr, cpu, 0);
519 freqs.new = extract_clock(msr, cpu, 0);
520
521 pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
522 target_freq, freqs.old, freqs.new, msr);
523
524 for_each_cpu(k, policy->cpus) {
525 if (!cpu_online(k))
526 continue;
527 freqs.cpu = k;
528 cpufreq_notify_transition(&freqs,
529 CPUFREQ_PRECHANGE);
530 }
531
532 first_cpu = 0;
533 /* all but 16 LSB are reserved, treat them with care */
534 oldmsr &= ~0xffff;
535 msr &= 0xffff;
536 oldmsr |= msr;
537 }
538
539 wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
540 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
541 break;
542
543 cpumask_set_cpu(j, covered_cpus);
544 }
545
546 for_each_cpu(k, policy->cpus) {
547 if (!cpu_online(k))
548 continue;
549 freqs.cpu = k;
550 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
551 }
552
553 if (unlikely(retval)) {
554 /*
555 * We have failed halfway through the frequency change.
556 * We have sent callbacks to policy->cpus and
557 * MSRs have already been written on coverd_cpus.
558 * Best effort undo..
559 */
560
561 for_each_cpu(j, covered_cpus)
562 wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
563
564 tmp = freqs.new;
565 freqs.new = freqs.old;
566 freqs.old = tmp;
567 for_each_cpu(j, policy->cpus) {
568 if (!cpu_online(j))
569 continue;
570 cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
571 cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
572 }
573 }
574 retval = 0;
575
576out:
577 free_cpumask_var(covered_cpus);
578 return retval;
579}
580
581static struct freq_attr* centrino_attr[] = {
582 &cpufreq_freq_attr_scaling_available_freqs,
583 NULL,
584};
585
586static struct cpufreq_driver centrino_driver = {
587 .name = "centrino", /* should be speedstep-centrino,
588 but there's a 16 char limit */
589 .init = centrino_cpu_init,
590 .exit = centrino_cpu_exit,
591 .verify = centrino_verify,
592 .target = centrino_target,
593 .get = get_cur_freq,
594 .attr = centrino_attr,
595 .owner = THIS_MODULE,
596};
597
598
599/**
600 * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
601 *
602 * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
603 * unsupported devices, -ENOENT if there's no voltage table for this
604 * particular CPU model, -EINVAL on problems during initiatization,
605 * and zero on success.
606 *
607 * This is quite picky. Not only does the CPU have to advertise the
608 * "est" flag in the cpuid capability flags, we look for a specific
609 * CPU model and stepping, and we need to have the exact model name in
610 * our voltage tables. That is, be paranoid about not releasing
611 * someone's valuable magic smoke.
612 */
613static int __init centrino_init(void)
614{
615 struct cpuinfo_x86 *cpu = &cpu_data(0);
616
617 if (!cpu_has(cpu, X86_FEATURE_EST))
618 return -ENODEV;
619
620 return cpufreq_register_driver(¢rino_driver);
621}
622
623static void __exit centrino_exit(void)
624{
625 cpufreq_unregister_driver(¢rino_driver);
626}
627
628MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
629MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
630MODULE_LICENSE ("GPL");
631
632late_initcall(centrino_init);
633module_exit(centrino_exit);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
4 * M (part of the Centrino chipset).
5 *
6 * Since the original Pentium M, most new Intel CPUs support Enhanced
7 * SpeedStep.
8 *
9 * Despite the "SpeedStep" in the name, this is almost entirely unlike
10 * traditional SpeedStep.
11 *
12 * Modelled on speedstep.c
13 *
14 * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
15 */
16
17#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
18
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/init.h>
22#include <linux/cpufreq.h>
23#include <linux/sched.h> /* current */
24#include <linux/delay.h>
25#include <linux/compiler.h>
26#include <linux/gfp.h>
27
28#include <asm/msr.h>
29#include <asm/processor.h>
30#include <asm/cpufeature.h>
31#include <asm/cpu_device_id.h>
32
33#define MAINTAINER "linux-pm@vger.kernel.org"
34
35#define INTEL_MSR_RANGE (0xffff)
36
37struct cpu_id
38{
39 __u8 x86; /* CPU family */
40 __u8 x86_model; /* model */
41 __u8 x86_stepping; /* stepping */
42};
43
44enum {
45 CPU_BANIAS,
46 CPU_DOTHAN_A1,
47 CPU_DOTHAN_A2,
48 CPU_DOTHAN_B0,
49 CPU_MP4HT_D0,
50 CPU_MP4HT_E0,
51};
52
53static const struct cpu_id cpu_ids[] = {
54 [CPU_BANIAS] = { 6, 9, 5 },
55 [CPU_DOTHAN_A1] = { 6, 13, 1 },
56 [CPU_DOTHAN_A2] = { 6, 13, 2 },
57 [CPU_DOTHAN_B0] = { 6, 13, 6 },
58 [CPU_MP4HT_D0] = {15, 3, 4 },
59 [CPU_MP4HT_E0] = {15, 4, 1 },
60};
61#define N_IDS ARRAY_SIZE(cpu_ids)
62
63struct cpu_model
64{
65 const struct cpu_id *cpu_id;
66 const char *model_name;
67 unsigned max_freq; /* max clock in kHz */
68
69 struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
70};
71static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
72 const struct cpu_id *x);
73
74/* Operating points for current CPU */
75static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
76static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
77
78static struct cpufreq_driver centrino_driver;
79
80#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
81
82/* Computes the correct form for IA32_PERF_CTL MSR for a particular
83 frequency/voltage operating point; frequency in MHz, volts in mV.
84 This is stored as "driver_data" in the structure. */
85#define OP(mhz, mv) \
86 { \
87 .frequency = (mhz) * 1000, \
88 .driver_data = (((mhz)/100) << 8) | ((mv - 700) / 16) \
89 }
90
91/*
92 * These voltage tables were derived from the Intel Pentium M
93 * datasheet, document 25261202.pdf, Table 5. I have verified they
94 * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
95 * M.
96 */
97
98/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
99static struct cpufreq_frequency_table banias_900[] =
100{
101 OP(600, 844),
102 OP(800, 988),
103 OP(900, 1004),
104 { .frequency = CPUFREQ_TABLE_END }
105};
106
107/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
108static struct cpufreq_frequency_table banias_1000[] =
109{
110 OP(600, 844),
111 OP(800, 972),
112 OP(900, 988),
113 OP(1000, 1004),
114 { .frequency = CPUFREQ_TABLE_END }
115};
116
117/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
118static struct cpufreq_frequency_table banias_1100[] =
119{
120 OP( 600, 956),
121 OP( 800, 1020),
122 OP( 900, 1100),
123 OP(1000, 1164),
124 OP(1100, 1180),
125 { .frequency = CPUFREQ_TABLE_END }
126};
127
128
129/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
130static struct cpufreq_frequency_table banias_1200[] =
131{
132 OP( 600, 956),
133 OP( 800, 1004),
134 OP( 900, 1020),
135 OP(1000, 1100),
136 OP(1100, 1164),
137 OP(1200, 1180),
138 { .frequency = CPUFREQ_TABLE_END }
139};
140
141/* Intel Pentium M processor 1.30GHz (Banias) */
142static struct cpufreq_frequency_table banias_1300[] =
143{
144 OP( 600, 956),
145 OP( 800, 1260),
146 OP(1000, 1292),
147 OP(1200, 1356),
148 OP(1300, 1388),
149 { .frequency = CPUFREQ_TABLE_END }
150};
151
152/* Intel Pentium M processor 1.40GHz (Banias) */
153static struct cpufreq_frequency_table banias_1400[] =
154{
155 OP( 600, 956),
156 OP( 800, 1180),
157 OP(1000, 1308),
158 OP(1200, 1436),
159 OP(1400, 1484),
160 { .frequency = CPUFREQ_TABLE_END }
161};
162
163/* Intel Pentium M processor 1.50GHz (Banias) */
164static struct cpufreq_frequency_table banias_1500[] =
165{
166 OP( 600, 956),
167 OP( 800, 1116),
168 OP(1000, 1228),
169 OP(1200, 1356),
170 OP(1400, 1452),
171 OP(1500, 1484),
172 { .frequency = CPUFREQ_TABLE_END }
173};
174
175/* Intel Pentium M processor 1.60GHz (Banias) */
176static struct cpufreq_frequency_table banias_1600[] =
177{
178 OP( 600, 956),
179 OP( 800, 1036),
180 OP(1000, 1164),
181 OP(1200, 1276),
182 OP(1400, 1420),
183 OP(1600, 1484),
184 { .frequency = CPUFREQ_TABLE_END }
185};
186
187/* Intel Pentium M processor 1.70GHz (Banias) */
188static struct cpufreq_frequency_table banias_1700[] =
189{
190 OP( 600, 956),
191 OP( 800, 1004),
192 OP(1000, 1116),
193 OP(1200, 1228),
194 OP(1400, 1308),
195 OP(1700, 1484),
196 { .frequency = CPUFREQ_TABLE_END }
197};
198#undef OP
199
200#define _BANIAS(cpuid, max, name) \
201{ .cpu_id = cpuid, \
202 .model_name = "Intel(R) Pentium(R) M processor " name "MHz", \
203 .max_freq = (max)*1000, \
204 .op_points = banias_##max, \
205}
206#define BANIAS(max) _BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
207
208/* CPU models, their operating frequency range, and freq/voltage
209 operating points */
210static struct cpu_model models[] =
211{
212 _BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
213 BANIAS(1000),
214 BANIAS(1100),
215 BANIAS(1200),
216 BANIAS(1300),
217 BANIAS(1400),
218 BANIAS(1500),
219 BANIAS(1600),
220 BANIAS(1700),
221
222 /* NULL model_name is a wildcard */
223 { &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
224 { &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
225 { &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
226 { &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
227 { &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
228
229 { NULL, }
230};
231#undef _BANIAS
232#undef BANIAS
233
234static int centrino_cpu_init_table(struct cpufreq_policy *policy)
235{
236 struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
237 struct cpu_model *model;
238
239 for(model = models; model->cpu_id != NULL; model++)
240 if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
241 (model->model_name == NULL ||
242 strcmp(cpu->x86_model_id, model->model_name) == 0))
243 break;
244
245 if (model->cpu_id == NULL) {
246 /* No match at all */
247 pr_debug("no support for CPU model \"%s\": "
248 "send /proc/cpuinfo to " MAINTAINER "\n",
249 cpu->x86_model_id);
250 return -ENOENT;
251 }
252
253 if (model->op_points == NULL) {
254 /* Matched a non-match */
255 pr_debug("no table support for CPU model \"%s\"\n",
256 cpu->x86_model_id);
257 pr_debug("try using the acpi-cpufreq driver\n");
258 return -ENOENT;
259 }
260
261 per_cpu(centrino_model, policy->cpu) = model;
262
263 pr_debug("found \"%s\": max frequency: %dkHz\n",
264 model->model_name, model->max_freq);
265
266 return 0;
267}
268
269#else
270static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
271{
272 return -ENODEV;
273}
274#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
275
276static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
277 const struct cpu_id *x)
278{
279 if ((c->x86 == x->x86) &&
280 (c->x86_model == x->x86_model) &&
281 (c->x86_stepping == x->x86_stepping))
282 return 1;
283 return 0;
284}
285
286/* To be called only after centrino_model is initialized */
287static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
288{
289 int i;
290
291 /*
292 * Extract clock in kHz from PERF_CTL value
293 * for centrino, as some DSDTs are buggy.
294 * Ideally, this can be done using the acpi_data structure.
295 */
296 if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
297 (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
298 (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
299 msr = (msr >> 8) & 0xff;
300 return msr * 100000;
301 }
302
303 if ((!per_cpu(centrino_model, cpu)) ||
304 (!per_cpu(centrino_model, cpu)->op_points))
305 return 0;
306
307 msr &= 0xffff;
308 for (i = 0;
309 per_cpu(centrino_model, cpu)->op_points[i].frequency
310 != CPUFREQ_TABLE_END;
311 i++) {
312 if (msr == per_cpu(centrino_model, cpu)->op_points[i].driver_data)
313 return per_cpu(centrino_model, cpu)->
314 op_points[i].frequency;
315 }
316 if (failsafe)
317 return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
318 else
319 return 0;
320}
321
322/* Return the current CPU frequency in kHz */
323static unsigned int get_cur_freq(unsigned int cpu)
324{
325 unsigned l, h;
326 unsigned clock_freq;
327
328 rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
329 clock_freq = extract_clock(l, cpu, 0);
330
331 if (unlikely(clock_freq == 0)) {
332 /*
333 * On some CPUs, we can see transient MSR values (which are
334 * not present in _PSS), while CPU is doing some automatic
335 * P-state transition (like TM2). Get the last freq set
336 * in PERF_CTL.
337 */
338 rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
339 clock_freq = extract_clock(l, cpu, 1);
340 }
341 return clock_freq;
342}
343
344
345static int centrino_cpu_init(struct cpufreq_policy *policy)
346{
347 struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
348 unsigned l, h;
349 int i;
350
351 /* Only Intel makes Enhanced Speedstep-capable CPUs */
352 if (cpu->x86_vendor != X86_VENDOR_INTEL ||
353 !cpu_has(cpu, X86_FEATURE_EST))
354 return -ENODEV;
355
356 if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
357 centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
358
359 if (policy->cpu != 0)
360 return -ENODEV;
361
362 for (i = 0; i < N_IDS; i++)
363 if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
364 break;
365
366 if (i != N_IDS)
367 per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
368
369 if (!per_cpu(centrino_cpu, policy->cpu)) {
370 pr_debug("found unsupported CPU with "
371 "Enhanced SpeedStep: send /proc/cpuinfo to "
372 MAINTAINER "\n");
373 return -ENODEV;
374 }
375
376 if (centrino_cpu_init_table(policy))
377 return -ENODEV;
378
379 /* Check to see if Enhanced SpeedStep is enabled, and try to
380 enable it if not. */
381 rdmsr(MSR_IA32_MISC_ENABLE, l, h);
382
383 if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
384 l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
385 pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
386 wrmsr(MSR_IA32_MISC_ENABLE, l, h);
387
388 /* check to see if it stuck */
389 rdmsr(MSR_IA32_MISC_ENABLE, l, h);
390 if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
391 pr_info("couldn't enable Enhanced SpeedStep\n");
392 return -ENODEV;
393 }
394 }
395
396 policy->cpuinfo.transition_latency = 10000;
397 /* 10uS transition latency */
398 policy->freq_table = per_cpu(centrino_model, policy->cpu)->op_points;
399
400 return 0;
401}
402
403static int centrino_cpu_exit(struct cpufreq_policy *policy)
404{
405 unsigned int cpu = policy->cpu;
406
407 if (!per_cpu(centrino_model, cpu))
408 return -ENODEV;
409
410 per_cpu(centrino_model, cpu) = NULL;
411
412 return 0;
413}
414
415/**
416 * centrino_target - set a new CPUFreq policy
417 * @policy: new policy
418 * @index: index of target frequency
419 *
420 * Sets a new CPUFreq policy.
421 */
422static int centrino_target(struct cpufreq_policy *policy, unsigned int index)
423{
424 unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu;
425 int retval = 0;
426 unsigned int j, first_cpu;
427 struct cpufreq_frequency_table *op_points;
428 cpumask_var_t covered_cpus;
429
430 if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
431 return -ENOMEM;
432
433 if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
434 retval = -ENODEV;
435 goto out;
436 }
437
438 first_cpu = 1;
439 op_points = &per_cpu(centrino_model, cpu)->op_points[index];
440 for_each_cpu(j, policy->cpus) {
441 int good_cpu;
442
443 /*
444 * Support for SMP systems.
445 * Make sure we are running on CPU that wants to change freq
446 */
447 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
448 good_cpu = cpumask_any_and(policy->cpus,
449 cpu_online_mask);
450 else
451 good_cpu = j;
452
453 if (good_cpu >= nr_cpu_ids) {
454 pr_debug("couldn't limit to CPUs in this domain\n");
455 retval = -EAGAIN;
456 if (first_cpu) {
457 /* We haven't started the transition yet. */
458 goto out;
459 }
460 break;
461 }
462
463 msr = op_points->driver_data;
464
465 if (first_cpu) {
466 rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
467 if (msr == (oldmsr & 0xffff)) {
468 pr_debug("no change needed - msr was and needs "
469 "to be %x\n", oldmsr);
470 retval = 0;
471 goto out;
472 }
473
474 first_cpu = 0;
475 /* all but 16 LSB are reserved, treat them with care */
476 oldmsr &= ~0xffff;
477 msr &= 0xffff;
478 oldmsr |= msr;
479 }
480
481 wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
482 if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
483 break;
484
485 cpumask_set_cpu(j, covered_cpus);
486 }
487
488 if (unlikely(retval)) {
489 /*
490 * We have failed halfway through the frequency change.
491 * We have sent callbacks to policy->cpus and
492 * MSRs have already been written on coverd_cpus.
493 * Best effort undo..
494 */
495
496 for_each_cpu(j, covered_cpus)
497 wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
498 }
499 retval = 0;
500
501out:
502 free_cpumask_var(covered_cpus);
503 return retval;
504}
505
506static struct cpufreq_driver centrino_driver = {
507 .name = "centrino", /* should be speedstep-centrino,
508 but there's a 16 char limit */
509 .init = centrino_cpu_init,
510 .exit = centrino_cpu_exit,
511 .verify = cpufreq_generic_frequency_table_verify,
512 .target_index = centrino_target,
513 .get = get_cur_freq,
514 .attr = cpufreq_generic_attr,
515};
516
517/*
518 * This doesn't replace the detailed checks above because
519 * the generic CPU IDs don't have a way to match for steppings
520 * or ASCII model IDs.
521 */
522static const struct x86_cpu_id centrino_ids[] = {
523 X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, 9, X86_FEATURE_EST, NULL),
524 X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 6, 13, X86_FEATURE_EST, NULL),
525 X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 15, 3, X86_FEATURE_EST, NULL),
526 X86_MATCH_VENDOR_FAM_MODEL_FEATURE(INTEL, 15, 4, X86_FEATURE_EST, NULL),
527 {}
528};
529
530/**
531 * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
532 *
533 * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
534 * unsupported devices, -ENOENT if there's no voltage table for this
535 * particular CPU model, -EINVAL on problems during initiatization,
536 * and zero on success.
537 *
538 * This is quite picky. Not only does the CPU have to advertise the
539 * "est" flag in the cpuid capability flags, we look for a specific
540 * CPU model and stepping, and we need to have the exact model name in
541 * our voltage tables. That is, be paranoid about not releasing
542 * someone's valuable magic smoke.
543 */
544static int __init centrino_init(void)
545{
546 if (!x86_match_cpu(centrino_ids))
547 return -ENODEV;
548 return cpufreq_register_driver(¢rino_driver);
549}
550
551static void __exit centrino_exit(void)
552{
553 cpufreq_unregister_driver(¢rino_driver);
554}
555
556MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
557MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
558MODULE_LICENSE ("GPL");
559
560late_initcall(centrino_init);
561module_exit(centrino_exit);