Loading...
1/*
2 * arch/arm/include/asm/pgtable.h
3 *
4 * Copyright (C) 1995-2002 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10#ifndef _ASMARM_PGTABLE_H
11#define _ASMARM_PGTABLE_H
12
13#include <linux/const.h>
14#include <asm-generic/4level-fixup.h>
15#include <asm/proc-fns.h>
16
17#ifndef CONFIG_MMU
18
19#include "pgtable-nommu.h"
20
21#else
22
23#include <asm/memory.h>
24#include <mach/vmalloc.h>
25#include <asm/pgtable-hwdef.h>
26
27/*
28 * Just any arbitrary offset to the start of the vmalloc VM area: the
29 * current 8MB value just means that there will be a 8MB "hole" after the
30 * physical memory until the kernel virtual memory starts. That means that
31 * any out-of-bounds memory accesses will hopefully be caught.
32 * The vmalloc() routines leaves a hole of 4kB between each vmalloced
33 * area for the same reason. ;)
34 *
35 * Note that platforms may override VMALLOC_START, but they must provide
36 * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space,
37 * which may not overlap IO space.
38 */
39#ifndef VMALLOC_START
40#define VMALLOC_OFFSET (8*1024*1024)
41#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
42#endif
43
44/*
45 * Hardware-wise, we have a two level page table structure, where the first
46 * level has 4096 entries, and the second level has 256 entries. Each entry
47 * is one 32-bit word. Most of the bits in the second level entry are used
48 * by hardware, and there aren't any "accessed" and "dirty" bits.
49 *
50 * Linux on the other hand has a three level page table structure, which can
51 * be wrapped to fit a two level page table structure easily - using the PGD
52 * and PTE only. However, Linux also expects one "PTE" table per page, and
53 * at least a "dirty" bit.
54 *
55 * Therefore, we tweak the implementation slightly - we tell Linux that we
56 * have 2048 entries in the first level, each of which is 8 bytes (iow, two
57 * hardware pointers to the second level.) The second level contains two
58 * hardware PTE tables arranged contiguously, preceded by Linux versions
59 * which contain the state information Linux needs. We, therefore, end up
60 * with 512 entries in the "PTE" level.
61 *
62 * This leads to the page tables having the following layout:
63 *
64 * pgd pte
65 * | |
66 * +--------+
67 * | | +------------+ +0
68 * +- - - - + | Linux pt 0 |
69 * | | +------------+ +1024
70 * +--------+ +0 | Linux pt 1 |
71 * | |-----> +------------+ +2048
72 * +- - - - + +4 | h/w pt 0 |
73 * | |-----> +------------+ +3072
74 * +--------+ +8 | h/w pt 1 |
75 * | | +------------+ +4096
76 *
77 * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
78 * PTE_xxx for definitions of bits appearing in the "h/w pt".
79 *
80 * PMD_xxx definitions refer to bits in the first level page table.
81 *
82 * The "dirty" bit is emulated by only granting hardware write permission
83 * iff the page is marked "writable" and "dirty" in the Linux PTE. This
84 * means that a write to a clean page will cause a permission fault, and
85 * the Linux MM layer will mark the page dirty via handle_pte_fault().
86 * For the hardware to notice the permission change, the TLB entry must
87 * be flushed, and ptep_set_access_flags() does that for us.
88 *
89 * The "accessed" or "young" bit is emulated by a similar method; we only
90 * allow accesses to the page if the "young" bit is set. Accesses to the
91 * page will cause a fault, and handle_pte_fault() will set the young bit
92 * for us as long as the page is marked present in the corresponding Linux
93 * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is
94 * up to date.
95 *
96 * However, when the "young" bit is cleared, we deny access to the page
97 * by clearing the hardware PTE. Currently Linux does not flush the TLB
98 * for us in this case, which means the TLB will retain the transation
99 * until either the TLB entry is evicted under pressure, or a context
100 * switch which changes the user space mapping occurs.
101 */
102#define PTRS_PER_PTE 512
103#define PTRS_PER_PMD 1
104#define PTRS_PER_PGD 2048
105
106#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
107#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t))
108#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
109
110/*
111 * PMD_SHIFT determines the size of the area a second-level page table can map
112 * PGDIR_SHIFT determines what a third-level page table entry can map
113 */
114#define PMD_SHIFT 21
115#define PGDIR_SHIFT 21
116
117#define LIBRARY_TEXT_START 0x0c000000
118
119#ifndef __ASSEMBLY__
120extern void __pte_error(const char *file, int line, pte_t);
121extern void __pmd_error(const char *file, int line, pmd_t);
122extern void __pgd_error(const char *file, int line, pgd_t);
123
124#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte)
125#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd)
126#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd)
127#endif /* !__ASSEMBLY__ */
128
129#define PMD_SIZE (1UL << PMD_SHIFT)
130#define PMD_MASK (~(PMD_SIZE-1))
131#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
132#define PGDIR_MASK (~(PGDIR_SIZE-1))
133
134/*
135 * This is the lowest virtual address we can permit any user space
136 * mapping to be mapped at. This is particularly important for
137 * non-high vector CPUs.
138 */
139#define FIRST_USER_ADDRESS PAGE_SIZE
140
141#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
142
143/*
144 * section address mask and size definitions.
145 */
146#define SECTION_SHIFT 20
147#define SECTION_SIZE (1UL << SECTION_SHIFT)
148#define SECTION_MASK (~(SECTION_SIZE-1))
149
150/*
151 * ARMv6 supersection address mask and size definitions.
152 */
153#define SUPERSECTION_SHIFT 24
154#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT)
155#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1))
156
157/*
158 * "Linux" PTE definitions.
159 *
160 * We keep two sets of PTEs - the hardware and the linux version.
161 * This allows greater flexibility in the way we map the Linux bits
162 * onto the hardware tables, and allows us to have YOUNG and DIRTY
163 * bits.
164 *
165 * The PTE table pointer refers to the hardware entries; the "Linux"
166 * entries are stored 1024 bytes below.
167 */
168#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0)
169#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1)
170#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */
171#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6)
172#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7)
173#define L_PTE_USER (_AT(pteval_t, 1) << 8)
174#define L_PTE_XN (_AT(pteval_t, 1) << 9)
175#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */
176
177/*
178 * These are the memory types, defined to be compatible with
179 * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB
180 */
181#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */
182#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */
183#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */
184#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */
185#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */
186#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */
187#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */
188#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */
189#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */
190#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
191#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
192
193#ifndef __ASSEMBLY__
194
195/*
196 * The pgprot_* and protection_map entries will be fixed up in runtime
197 * to include the cachable and bufferable bits based on memory policy,
198 * as well as any architecture dependent bits like global/ASID and SMP
199 * shared mapping bits.
200 */
201#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG
202
203extern pgprot_t pgprot_user;
204extern pgprot_t pgprot_kernel;
205
206#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
207
208#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY)
209#define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN)
210#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER)
211#define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
212#define PAGE_COPY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
213#define PAGE_READONLY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
214#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
215#define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN)
216#define PAGE_KERNEL_EXEC pgprot_kernel
217
218#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN)
219#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
220#define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
221#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
222#define __PAGE_COPY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
223#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
224#define __PAGE_READONLY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
225
226#define __pgprot_modify(prot,mask,bits) \
227 __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
228
229#define pgprot_noncached(prot) \
230 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
231
232#define pgprot_writecombine(prot) \
233 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
234
235#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
236#define pgprot_dmacoherent(prot) \
237 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
238#define __HAVE_PHYS_MEM_ACCESS_PROT
239struct file;
240extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
241 unsigned long size, pgprot_t vma_prot);
242#else
243#define pgprot_dmacoherent(prot) \
244 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED | L_PTE_XN)
245#endif
246
247#endif /* __ASSEMBLY__ */
248
249/*
250 * The table below defines the page protection levels that we insert into our
251 * Linux page table version. These get translated into the best that the
252 * architecture can perform. Note that on most ARM hardware:
253 * 1) We cannot do execute protection
254 * 2) If we could do execute protection, then read is implied
255 * 3) write implies read permissions
256 */
257#define __P000 __PAGE_NONE
258#define __P001 __PAGE_READONLY
259#define __P010 __PAGE_COPY
260#define __P011 __PAGE_COPY
261#define __P100 __PAGE_READONLY_EXEC
262#define __P101 __PAGE_READONLY_EXEC
263#define __P110 __PAGE_COPY_EXEC
264#define __P111 __PAGE_COPY_EXEC
265
266#define __S000 __PAGE_NONE
267#define __S001 __PAGE_READONLY
268#define __S010 __PAGE_SHARED
269#define __S011 __PAGE_SHARED
270#define __S100 __PAGE_READONLY_EXEC
271#define __S101 __PAGE_READONLY_EXEC
272#define __S110 __PAGE_SHARED_EXEC
273#define __S111 __PAGE_SHARED_EXEC
274
275#ifndef __ASSEMBLY__
276/*
277 * ZERO_PAGE is a global shared page that is always zero: used
278 * for zero-mapped memory areas etc..
279 */
280extern struct page *empty_zero_page;
281#define ZERO_PAGE(vaddr) (empty_zero_page)
282
283
284extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
285
286/* to find an entry in a page-table-directory */
287#define pgd_index(addr) ((addr) >> PGDIR_SHIFT)
288
289#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
290
291/* to find an entry in a kernel page-table-directory */
292#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
293
294/*
295 * The "pgd_xxx()" functions here are trivial for a folded two-level
296 * setup: the pgd is never bad, and a pmd always exists (as it's folded
297 * into the pgd entry)
298 */
299#define pgd_none(pgd) (0)
300#define pgd_bad(pgd) (0)
301#define pgd_present(pgd) (1)
302#define pgd_clear(pgdp) do { } while (0)
303#define set_pgd(pgd,pgdp) do { } while (0)
304#define set_pud(pud,pudp) do { } while (0)
305
306
307/* Find an entry in the second-level page table.. */
308#define pmd_offset(dir, addr) ((pmd_t *)(dir))
309
310#define pmd_none(pmd) (!pmd_val(pmd))
311#define pmd_present(pmd) (pmd_val(pmd))
312#define pmd_bad(pmd) (pmd_val(pmd) & 2)
313
314#define copy_pmd(pmdpd,pmdps) \
315 do { \
316 pmdpd[0] = pmdps[0]; \
317 pmdpd[1] = pmdps[1]; \
318 flush_pmd_entry(pmdpd); \
319 } while (0)
320
321#define pmd_clear(pmdp) \
322 do { \
323 pmdp[0] = __pmd(0); \
324 pmdp[1] = __pmd(0); \
325 clean_pmd_entry(pmdp); \
326 } while (0)
327
328static inline pte_t *pmd_page_vaddr(pmd_t pmd)
329{
330 return __va(pmd_val(pmd) & PAGE_MASK);
331}
332
333#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
334
335/* we don't need complex calculations here as the pmd is folded into the pgd */
336#define pmd_addr_end(addr,end) (end)
337
338
339#ifndef CONFIG_HIGHPTE
340#define __pte_map(pmd) pmd_page_vaddr(*(pmd))
341#define __pte_unmap(pte) do { } while (0)
342#else
343#define __pte_map(pmd) (pte_t *)kmap_atomic(pmd_page(*(pmd)))
344#define __pte_unmap(pte) kunmap_atomic(pte)
345#endif
346
347#define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
348
349#define pte_offset_kernel(pmd,addr) (pmd_page_vaddr(*(pmd)) + pte_index(addr))
350
351#define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr))
352#define pte_unmap(pte) __pte_unmap(pte)
353
354#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
355#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot))
356
357#define pte_page(pte) pfn_to_page(pte_pfn(pte))
358#define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot)
359
360#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
361#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
362
363#if __LINUX_ARM_ARCH__ < 6
364static inline void __sync_icache_dcache(pte_t pteval)
365{
366}
367#else
368extern void __sync_icache_dcache(pte_t pteval);
369#endif
370
371static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
372 pte_t *ptep, pte_t pteval)
373{
374 if (addr >= TASK_SIZE)
375 set_pte_ext(ptep, pteval, 0);
376 else {
377 __sync_icache_dcache(pteval);
378 set_pte_ext(ptep, pteval, PTE_EXT_NG);
379 }
380}
381
382#define pte_none(pte) (!pte_val(pte))
383#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT)
384#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY))
385#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
386#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
387#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN))
388#define pte_special(pte) (0)
389
390#define pte_present_user(pte) \
391 ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
392 (L_PTE_PRESENT | L_PTE_USER))
393
394#define PTE_BIT_FUNC(fn,op) \
395static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
396
397PTE_BIT_FUNC(wrprotect, |= L_PTE_RDONLY);
398PTE_BIT_FUNC(mkwrite, &= ~L_PTE_RDONLY);
399PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY);
400PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY);
401PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG);
402PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG);
403
404static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
405
406static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
407{
408 const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER;
409 pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
410 return pte;
411}
412
413/*
414 * Encode and decode a swap entry. Swap entries are stored in the Linux
415 * page tables as follows:
416 *
417 * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
418 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
419 * <--------------- offset --------------------> <- type --> 0 0 0
420 *
421 * This gives us up to 63 swap files and 32GB per swap file. Note that
422 * the offset field is always non-zero.
423 */
424#define __SWP_TYPE_SHIFT 3
425#define __SWP_TYPE_BITS 6
426#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
427#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
428
429#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
430#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
431#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
432
433#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
434#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
435
436/*
437 * It is an error for the kernel to have more swap files than we can
438 * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
439 * is increased beyond what we presently support.
440 */
441#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
442
443/*
444 * Encode and decode a file entry. File entries are stored in the Linux
445 * page tables as follows:
446 *
447 * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
448 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
449 * <----------------------- offset ------------------------> 1 0 0
450 */
451#define pte_file(pte) (pte_val(pte) & L_PTE_FILE)
452#define pte_to_pgoff(x) (pte_val(x) >> 3)
453#define pgoff_to_pte(x) __pte(((x) << 3) | L_PTE_FILE)
454
455#define PTE_FILE_MAX_BITS 29
456
457/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
458/* FIXME: this is not correct */
459#define kern_addr_valid(addr) (1)
460
461#include <asm-generic/pgtable.h>
462
463/*
464 * We provide our own arch_get_unmapped_area to cope with VIPT caches.
465 */
466#define HAVE_ARCH_UNMAPPED_AREA
467
468/*
469 * remap a physical page `pfn' of size `size' with page protection `prot'
470 * into virtual address `from'
471 */
472#define io_remap_pfn_range(vma,from,pfn,size,prot) \
473 remap_pfn_range(vma, from, pfn, size, prot)
474
475#define pgtable_cache_init() do { } while (0)
476
477void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
478void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
479
480#endif /* !__ASSEMBLY__ */
481
482#endif /* CONFIG_MMU */
483
484#endif /* _ASMARM_PGTABLE_H */
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * arch/arm/include/asm/pgtable.h
4 *
5 * Copyright (C) 1995-2002 Russell King
6 */
7#ifndef _ASMARM_PGTABLE_H
8#define _ASMARM_PGTABLE_H
9
10#include <linux/const.h>
11#include <asm/proc-fns.h>
12
13#ifndef CONFIG_MMU
14
15#include <asm-generic/pgtable-nopud.h>
16#include <asm/pgtable-nommu.h>
17
18#else
19
20#include <asm-generic/pgtable-nopud.h>
21#include <asm/memory.h>
22#include <asm/pgtable-hwdef.h>
23
24
25#include <asm/tlbflush.h>
26
27#ifdef CONFIG_ARM_LPAE
28#include <asm/pgtable-3level.h>
29#else
30#include <asm/pgtable-2level.h>
31#endif
32
33/*
34 * Just any arbitrary offset to the start of the vmalloc VM area: the
35 * current 8MB value just means that there will be a 8MB "hole" after the
36 * physical memory until the kernel virtual memory starts. That means that
37 * any out-of-bounds memory accesses will hopefully be caught.
38 * The vmalloc() routines leaves a hole of 4kB between each vmalloced
39 * area for the same reason. ;)
40 */
41#define VMALLOC_OFFSET (8*1024*1024)
42#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
43#define VMALLOC_END 0xff800000UL
44
45#define LIBRARY_TEXT_START 0x0c000000
46
47#ifndef __ASSEMBLY__
48extern void __pte_error(const char *file, int line, pte_t);
49extern void __pmd_error(const char *file, int line, pmd_t);
50extern void __pgd_error(const char *file, int line, pgd_t);
51
52#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte)
53#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd)
54#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd)
55
56/*
57 * This is the lowest virtual address we can permit any user space
58 * mapping to be mapped at. This is particularly important for
59 * non-high vector CPUs.
60 */
61#define FIRST_USER_ADDRESS (PAGE_SIZE * 2)
62
63/*
64 * Use TASK_SIZE as the ceiling argument for free_pgtables() and
65 * free_pgd_range() to avoid freeing the modules pmd when LPAE is enabled (pmd
66 * page shared between user and kernel).
67 */
68#ifdef CONFIG_ARM_LPAE
69#define USER_PGTABLES_CEILING TASK_SIZE
70#endif
71
72/*
73 * The pgprot_* and protection_map entries will be fixed up in runtime
74 * to include the cachable and bufferable bits based on memory policy,
75 * as well as any architecture dependent bits like global/ASID and SMP
76 * shared mapping bits.
77 */
78#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG
79
80extern pgprot_t pgprot_user;
81extern pgprot_t pgprot_kernel;
82
83#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
84
85#define PAGE_NONE _MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY | L_PTE_NONE)
86#define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN)
87#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER)
88#define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
89#define PAGE_COPY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
90#define PAGE_READONLY _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
91#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
92#define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN)
93#define PAGE_KERNEL_EXEC pgprot_kernel
94
95#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE)
96#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
97#define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
98#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
99#define __PAGE_COPY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
100#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
101#define __PAGE_READONLY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
102
103#define __pgprot_modify(prot,mask,bits) \
104 __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
105
106#define pgprot_noncached(prot) \
107 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
108
109#define pgprot_writecombine(prot) \
110 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
111
112#define pgprot_stronglyordered(prot) \
113 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
114
115#define pgprot_device(prot) \
116 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_DEV_SHARED | L_PTE_SHARED | L_PTE_DIRTY | L_PTE_XN)
117
118#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
119#define pgprot_dmacoherent(prot) \
120 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
121#define __HAVE_PHYS_MEM_ACCESS_PROT
122struct file;
123extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
124 unsigned long size, pgprot_t vma_prot);
125#else
126#define pgprot_dmacoherent(prot) \
127 __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED | L_PTE_XN)
128#endif
129
130#endif /* __ASSEMBLY__ */
131
132/*
133 * The table below defines the page protection levels that we insert into our
134 * Linux page table version. These get translated into the best that the
135 * architecture can perform. Note that on most ARM hardware:
136 * 1) We cannot do execute protection
137 * 2) If we could do execute protection, then read is implied
138 * 3) write implies read permissions
139 */
140#define __P000 __PAGE_NONE
141#define __P001 __PAGE_READONLY
142#define __P010 __PAGE_COPY
143#define __P011 __PAGE_COPY
144#define __P100 __PAGE_READONLY_EXEC
145#define __P101 __PAGE_READONLY_EXEC
146#define __P110 __PAGE_COPY_EXEC
147#define __P111 __PAGE_COPY_EXEC
148
149#define __S000 __PAGE_NONE
150#define __S001 __PAGE_READONLY
151#define __S010 __PAGE_SHARED
152#define __S011 __PAGE_SHARED
153#define __S100 __PAGE_READONLY_EXEC
154#define __S101 __PAGE_READONLY_EXEC
155#define __S110 __PAGE_SHARED_EXEC
156#define __S111 __PAGE_SHARED_EXEC
157
158#ifndef __ASSEMBLY__
159/*
160 * ZERO_PAGE is a global shared page that is always zero: used
161 * for zero-mapped memory areas etc..
162 */
163extern struct page *empty_zero_page;
164#define ZERO_PAGE(vaddr) (empty_zero_page)
165
166
167extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
168
169#define pud_page(pud) pmd_page(__pmd(pud_val(pud)))
170#define pud_write(pud) pmd_write(__pmd(pud_val(pud)))
171
172#define pmd_none(pmd) (!pmd_val(pmd))
173
174static inline pte_t *pmd_page_vaddr(pmd_t pmd)
175{
176 return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK);
177}
178
179#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
180
181#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT)
182#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot))
183
184#define pte_page(pte) pfn_to_page(pte_pfn(pte))
185#define mk_pte(page,prot) pfn_pte(page_to_pfn(page), prot)
186
187#define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0)
188
189#define pte_isset(pte, val) ((u32)(val) == (val) ? pte_val(pte) & (val) \
190 : !!(pte_val(pte) & (val)))
191#define pte_isclear(pte, val) (!(pte_val(pte) & (val)))
192
193#define pte_none(pte) (!pte_val(pte))
194#define pte_present(pte) (pte_isset((pte), L_PTE_PRESENT))
195#define pte_valid(pte) (pte_isset((pte), L_PTE_VALID))
196#define pte_accessible(mm, pte) (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
197#define pte_write(pte) (pte_isclear((pte), L_PTE_RDONLY))
198#define pte_dirty(pte) (pte_isset((pte), L_PTE_DIRTY))
199#define pte_young(pte) (pte_isset((pte), L_PTE_YOUNG))
200#define pte_exec(pte) (pte_isclear((pte), L_PTE_XN))
201
202#define pte_valid_user(pte) \
203 (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte))
204
205static inline bool pte_access_permitted(pte_t pte, bool write)
206{
207 pteval_t mask = L_PTE_PRESENT | L_PTE_USER;
208 pteval_t needed = mask;
209
210 if (write)
211 mask |= L_PTE_RDONLY;
212
213 return (pte_val(pte) & mask) == needed;
214}
215#define pte_access_permitted pte_access_permitted
216
217#if __LINUX_ARM_ARCH__ < 6
218static inline void __sync_icache_dcache(pte_t pteval)
219{
220}
221#else
222extern void __sync_icache_dcache(pte_t pteval);
223#endif
224
225void set_pte_at(struct mm_struct *mm, unsigned long addr,
226 pte_t *ptep, pte_t pteval);
227
228static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
229{
230 pte_val(pte) &= ~pgprot_val(prot);
231 return pte;
232}
233
234static inline pte_t set_pte_bit(pte_t pte, pgprot_t prot)
235{
236 pte_val(pte) |= pgprot_val(prot);
237 return pte;
238}
239
240static inline pte_t pte_wrprotect(pte_t pte)
241{
242 return set_pte_bit(pte, __pgprot(L_PTE_RDONLY));
243}
244
245static inline pte_t pte_mkwrite(pte_t pte)
246{
247 return clear_pte_bit(pte, __pgprot(L_PTE_RDONLY));
248}
249
250static inline pte_t pte_mkclean(pte_t pte)
251{
252 return clear_pte_bit(pte, __pgprot(L_PTE_DIRTY));
253}
254
255static inline pte_t pte_mkdirty(pte_t pte)
256{
257 return set_pte_bit(pte, __pgprot(L_PTE_DIRTY));
258}
259
260static inline pte_t pte_mkold(pte_t pte)
261{
262 return clear_pte_bit(pte, __pgprot(L_PTE_YOUNG));
263}
264
265static inline pte_t pte_mkyoung(pte_t pte)
266{
267 return set_pte_bit(pte, __pgprot(L_PTE_YOUNG));
268}
269
270static inline pte_t pte_mkexec(pte_t pte)
271{
272 return clear_pte_bit(pte, __pgprot(L_PTE_XN));
273}
274
275static inline pte_t pte_mknexec(pte_t pte)
276{
277 return set_pte_bit(pte, __pgprot(L_PTE_XN));
278}
279
280static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
281{
282 const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER |
283 L_PTE_NONE | L_PTE_VALID;
284 pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
285 return pte;
286}
287
288/*
289 * Encode and decode a swap entry. Swap entries are stored in the Linux
290 * page tables as follows:
291 *
292 * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
293 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
294 * <--------------- offset ------------------------> < type -> 0 0
295 *
296 * This gives us up to 31 swap files and 128GB per swap file. Note that
297 * the offset field is always non-zero.
298 */
299#define __SWP_TYPE_SHIFT 2
300#define __SWP_TYPE_BITS 5
301#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1)
302#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
303
304#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
305#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT)
306#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
307
308#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
309#define __swp_entry_to_pte(swp) __pte((swp).val | PTE_TYPE_FAULT)
310
311/*
312 * It is an error for the kernel to have more swap files than we can
313 * encode in the PTEs. This ensures that we know when MAX_SWAPFILES
314 * is increased beyond what we presently support.
315 */
316#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
317
318/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
319/* FIXME: this is not correct */
320#define kern_addr_valid(addr) (1)
321
322/*
323 * We provide our own arch_get_unmapped_area to cope with VIPT caches.
324 */
325#define HAVE_ARCH_UNMAPPED_AREA
326#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
327
328#endif /* !__ASSEMBLY__ */
329
330#endif /* CONFIG_MMU */
331
332#endif /* _ASMARM_PGTABLE_H */