Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * TI QSPI driver
4 *
5 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
6 * Author: Sourav Poddar <sourav.poddar@ti.com>
7 */
8
9#include <linux/kernel.h>
10#include <linux/init.h>
11#include <linux/interrupt.h>
12#include <linux/module.h>
13#include <linux/device.h>
14#include <linux/delay.h>
15#include <linux/dma-mapping.h>
16#include <linux/dmaengine.h>
17#include <linux/omap-dma.h>
18#include <linux/platform_device.h>
19#include <linux/err.h>
20#include <linux/clk.h>
21#include <linux/io.h>
22#include <linux/slab.h>
23#include <linux/pm_runtime.h>
24#include <linux/of.h>
25#include <linux/of_device.h>
26#include <linux/pinctrl/consumer.h>
27#include <linux/mfd/syscon.h>
28#include <linux/regmap.h>
29#include <linux/sizes.h>
30
31#include <linux/spi/spi.h>
32#include <linux/spi/spi-mem.h>
33
34struct ti_qspi_regs {
35 u32 clkctrl;
36};
37
38struct ti_qspi {
39 struct completion transfer_complete;
40
41 /* list synchronization */
42 struct mutex list_lock;
43
44 struct spi_master *master;
45 void __iomem *base;
46 void __iomem *mmap_base;
47 size_t mmap_size;
48 struct regmap *ctrl_base;
49 unsigned int ctrl_reg;
50 struct clk *fclk;
51 struct device *dev;
52
53 struct ti_qspi_regs ctx_reg;
54
55 dma_addr_t mmap_phys_base;
56 dma_addr_t rx_bb_dma_addr;
57 void *rx_bb_addr;
58 struct dma_chan *rx_chan;
59
60 u32 spi_max_frequency;
61 u32 cmd;
62 u32 dc;
63
64 bool mmap_enabled;
65 int current_cs;
66};
67
68#define QSPI_PID (0x0)
69#define QSPI_SYSCONFIG (0x10)
70#define QSPI_SPI_CLOCK_CNTRL_REG (0x40)
71#define QSPI_SPI_DC_REG (0x44)
72#define QSPI_SPI_CMD_REG (0x48)
73#define QSPI_SPI_STATUS_REG (0x4c)
74#define QSPI_SPI_DATA_REG (0x50)
75#define QSPI_SPI_SETUP_REG(n) ((0x54 + 4 * n))
76#define QSPI_SPI_SWITCH_REG (0x64)
77#define QSPI_SPI_DATA_REG_1 (0x68)
78#define QSPI_SPI_DATA_REG_2 (0x6c)
79#define QSPI_SPI_DATA_REG_3 (0x70)
80
81#define QSPI_COMPLETION_TIMEOUT msecs_to_jiffies(2000)
82
83/* Clock Control */
84#define QSPI_CLK_EN (1 << 31)
85#define QSPI_CLK_DIV_MAX 0xffff
86
87/* Command */
88#define QSPI_EN_CS(n) (n << 28)
89#define QSPI_WLEN(n) ((n - 1) << 19)
90#define QSPI_3_PIN (1 << 18)
91#define QSPI_RD_SNGL (1 << 16)
92#define QSPI_WR_SNGL (2 << 16)
93#define QSPI_RD_DUAL (3 << 16)
94#define QSPI_RD_QUAD (7 << 16)
95#define QSPI_INVAL (4 << 16)
96#define QSPI_FLEN(n) ((n - 1) << 0)
97#define QSPI_WLEN_MAX_BITS 128
98#define QSPI_WLEN_MAX_BYTES 16
99#define QSPI_WLEN_MASK QSPI_WLEN(QSPI_WLEN_MAX_BITS)
100
101/* STATUS REGISTER */
102#define BUSY 0x01
103#define WC 0x02
104
105/* Device Control */
106#define QSPI_DD(m, n) (m << (3 + n * 8))
107#define QSPI_CKPHA(n) (1 << (2 + n * 8))
108#define QSPI_CSPOL(n) (1 << (1 + n * 8))
109#define QSPI_CKPOL(n) (1 << (n * 8))
110
111#define QSPI_FRAME 4096
112
113#define QSPI_AUTOSUSPEND_TIMEOUT 2000
114
115#define MEM_CS_EN(n) ((n + 1) << 8)
116#define MEM_CS_MASK (7 << 8)
117
118#define MM_SWITCH 0x1
119
120#define QSPI_SETUP_RD_NORMAL (0x0 << 12)
121#define QSPI_SETUP_RD_DUAL (0x1 << 12)
122#define QSPI_SETUP_RD_QUAD (0x3 << 12)
123#define QSPI_SETUP_ADDR_SHIFT 8
124#define QSPI_SETUP_DUMMY_SHIFT 10
125
126#define QSPI_DMA_BUFFER_SIZE SZ_64K
127
128static inline unsigned long ti_qspi_read(struct ti_qspi *qspi,
129 unsigned long reg)
130{
131 return readl(qspi->base + reg);
132}
133
134static inline void ti_qspi_write(struct ti_qspi *qspi,
135 unsigned long val, unsigned long reg)
136{
137 writel(val, qspi->base + reg);
138}
139
140static int ti_qspi_setup(struct spi_device *spi)
141{
142 struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
143 struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
144 int clk_div = 0, ret;
145 u32 clk_ctrl_reg, clk_rate, clk_mask;
146
147 if (spi->master->busy) {
148 dev_dbg(qspi->dev, "master busy doing other transfers\n");
149 return -EBUSY;
150 }
151
152 if (!qspi->spi_max_frequency) {
153 dev_err(qspi->dev, "spi max frequency not defined\n");
154 return -EINVAL;
155 }
156
157 clk_rate = clk_get_rate(qspi->fclk);
158
159 clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1;
160
161 if (clk_div < 0) {
162 dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n");
163 return -EINVAL;
164 }
165
166 if (clk_div > QSPI_CLK_DIV_MAX) {
167 dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n",
168 QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1);
169 return -EINVAL;
170 }
171
172 dev_dbg(qspi->dev, "hz: %d, clock divider %d\n",
173 qspi->spi_max_frequency, clk_div);
174
175 ret = pm_runtime_get_sync(qspi->dev);
176 if (ret < 0) {
177 pm_runtime_put_noidle(qspi->dev);
178 dev_err(qspi->dev, "pm_runtime_get_sync() failed\n");
179 return ret;
180 }
181
182 clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
183
184 clk_ctrl_reg &= ~QSPI_CLK_EN;
185
186 /* disable SCLK */
187 ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
188
189 /* enable SCLK */
190 clk_mask = QSPI_CLK_EN | clk_div;
191 ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG);
192 ctx_reg->clkctrl = clk_mask;
193
194 pm_runtime_mark_last_busy(qspi->dev);
195 ret = pm_runtime_put_autosuspend(qspi->dev);
196 if (ret < 0) {
197 dev_err(qspi->dev, "pm_runtime_put_autosuspend() failed\n");
198 return ret;
199 }
200
201 return 0;
202}
203
204static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
205{
206 struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
207
208 ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
209}
210
211static inline u32 qspi_is_busy(struct ti_qspi *qspi)
212{
213 u32 stat;
214 unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
215
216 stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
217 while ((stat & BUSY) && time_after(timeout, jiffies)) {
218 cpu_relax();
219 stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
220 }
221
222 WARN(stat & BUSY, "qspi busy\n");
223 return stat & BUSY;
224}
225
226static inline int ti_qspi_poll_wc(struct ti_qspi *qspi)
227{
228 u32 stat;
229 unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
230
231 do {
232 stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
233 if (stat & WC)
234 return 0;
235 cpu_relax();
236 } while (time_after(timeout, jiffies));
237
238 stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
239 if (stat & WC)
240 return 0;
241 return -ETIMEDOUT;
242}
243
244static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t,
245 int count)
246{
247 int wlen, xfer_len;
248 unsigned int cmd;
249 const u8 *txbuf;
250 u32 data;
251
252 txbuf = t->tx_buf;
253 cmd = qspi->cmd | QSPI_WR_SNGL;
254 wlen = t->bits_per_word >> 3; /* in bytes */
255 xfer_len = wlen;
256
257 while (count) {
258 if (qspi_is_busy(qspi))
259 return -EBUSY;
260
261 switch (wlen) {
262 case 1:
263 dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
264 cmd, qspi->dc, *txbuf);
265 if (count >= QSPI_WLEN_MAX_BYTES) {
266 u32 *txp = (u32 *)txbuf;
267
268 data = cpu_to_be32(*txp++);
269 writel(data, qspi->base +
270 QSPI_SPI_DATA_REG_3);
271 data = cpu_to_be32(*txp++);
272 writel(data, qspi->base +
273 QSPI_SPI_DATA_REG_2);
274 data = cpu_to_be32(*txp++);
275 writel(data, qspi->base +
276 QSPI_SPI_DATA_REG_1);
277 data = cpu_to_be32(*txp++);
278 writel(data, qspi->base +
279 QSPI_SPI_DATA_REG);
280 xfer_len = QSPI_WLEN_MAX_BYTES;
281 cmd |= QSPI_WLEN(QSPI_WLEN_MAX_BITS);
282 } else {
283 writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG);
284 cmd = qspi->cmd | QSPI_WR_SNGL;
285 xfer_len = wlen;
286 cmd |= QSPI_WLEN(wlen);
287 }
288 break;
289 case 2:
290 dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n",
291 cmd, qspi->dc, *txbuf);
292 writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
293 break;
294 case 4:
295 dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n",
296 cmd, qspi->dc, *txbuf);
297 writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
298 break;
299 }
300
301 ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
302 if (ti_qspi_poll_wc(qspi)) {
303 dev_err(qspi->dev, "write timed out\n");
304 return -ETIMEDOUT;
305 }
306 txbuf += xfer_len;
307 count -= xfer_len;
308 }
309
310 return 0;
311}
312
313static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
314 int count)
315{
316 int wlen;
317 unsigned int cmd;
318 u32 rx;
319 u8 rxlen, rx_wlen;
320 u8 *rxbuf;
321
322 rxbuf = t->rx_buf;
323 cmd = qspi->cmd;
324 switch (t->rx_nbits) {
325 case SPI_NBITS_DUAL:
326 cmd |= QSPI_RD_DUAL;
327 break;
328 case SPI_NBITS_QUAD:
329 cmd |= QSPI_RD_QUAD;
330 break;
331 default:
332 cmd |= QSPI_RD_SNGL;
333 break;
334 }
335 wlen = t->bits_per_word >> 3; /* in bytes */
336 rx_wlen = wlen;
337
338 while (count) {
339 dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
340 if (qspi_is_busy(qspi))
341 return -EBUSY;
342
343 switch (wlen) {
344 case 1:
345 /*
346 * Optimize the 8-bit words transfers, as used by
347 * the SPI flash devices.
348 */
349 if (count >= QSPI_WLEN_MAX_BYTES) {
350 rxlen = QSPI_WLEN_MAX_BYTES;
351 } else {
352 rxlen = min(count, 4);
353 }
354 rx_wlen = rxlen << 3;
355 cmd &= ~QSPI_WLEN_MASK;
356 cmd |= QSPI_WLEN(rx_wlen);
357 break;
358 default:
359 rxlen = wlen;
360 break;
361 }
362
363 ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
364 if (ti_qspi_poll_wc(qspi)) {
365 dev_err(qspi->dev, "read timed out\n");
366 return -ETIMEDOUT;
367 }
368
369 switch (wlen) {
370 case 1:
371 /*
372 * Optimize the 8-bit words transfers, as used by
373 * the SPI flash devices.
374 */
375 if (count >= QSPI_WLEN_MAX_BYTES) {
376 u32 *rxp = (u32 *) rxbuf;
377 rx = readl(qspi->base + QSPI_SPI_DATA_REG_3);
378 *rxp++ = be32_to_cpu(rx);
379 rx = readl(qspi->base + QSPI_SPI_DATA_REG_2);
380 *rxp++ = be32_to_cpu(rx);
381 rx = readl(qspi->base + QSPI_SPI_DATA_REG_1);
382 *rxp++ = be32_to_cpu(rx);
383 rx = readl(qspi->base + QSPI_SPI_DATA_REG);
384 *rxp++ = be32_to_cpu(rx);
385 } else {
386 u8 *rxp = rxbuf;
387 rx = readl(qspi->base + QSPI_SPI_DATA_REG);
388 if (rx_wlen >= 8)
389 *rxp++ = rx >> (rx_wlen - 8);
390 if (rx_wlen >= 16)
391 *rxp++ = rx >> (rx_wlen - 16);
392 if (rx_wlen >= 24)
393 *rxp++ = rx >> (rx_wlen - 24);
394 if (rx_wlen >= 32)
395 *rxp++ = rx;
396 }
397 break;
398 case 2:
399 *((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
400 break;
401 case 4:
402 *((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
403 break;
404 }
405 rxbuf += rxlen;
406 count -= rxlen;
407 }
408
409 return 0;
410}
411
412static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t,
413 int count)
414{
415 int ret;
416
417 if (t->tx_buf) {
418 ret = qspi_write_msg(qspi, t, count);
419 if (ret) {
420 dev_dbg(qspi->dev, "Error while writing\n");
421 return ret;
422 }
423 }
424
425 if (t->rx_buf) {
426 ret = qspi_read_msg(qspi, t, count);
427 if (ret) {
428 dev_dbg(qspi->dev, "Error while reading\n");
429 return ret;
430 }
431 }
432
433 return 0;
434}
435
436static void ti_qspi_dma_callback(void *param)
437{
438 struct ti_qspi *qspi = param;
439
440 complete(&qspi->transfer_complete);
441}
442
443static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
444 dma_addr_t dma_src, size_t len)
445{
446 struct dma_chan *chan = qspi->rx_chan;
447 dma_cookie_t cookie;
448 enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
449 struct dma_async_tx_descriptor *tx;
450 int ret;
451
452 tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
453 if (!tx) {
454 dev_err(qspi->dev, "device_prep_dma_memcpy error\n");
455 return -EIO;
456 }
457
458 tx->callback = ti_qspi_dma_callback;
459 tx->callback_param = qspi;
460 cookie = tx->tx_submit(tx);
461 reinit_completion(&qspi->transfer_complete);
462
463 ret = dma_submit_error(cookie);
464 if (ret) {
465 dev_err(qspi->dev, "dma_submit_error %d\n", cookie);
466 return -EIO;
467 }
468
469 dma_async_issue_pending(chan);
470 ret = wait_for_completion_timeout(&qspi->transfer_complete,
471 msecs_to_jiffies(len));
472 if (ret <= 0) {
473 dmaengine_terminate_sync(chan);
474 dev_err(qspi->dev, "DMA wait_for_completion_timeout\n");
475 return -ETIMEDOUT;
476 }
477
478 return 0;
479}
480
481static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, loff_t offs,
482 void *to, size_t readsize)
483{
484 dma_addr_t dma_src = qspi->mmap_phys_base + offs;
485 int ret = 0;
486
487 /*
488 * Use bounce buffer as FS like jffs2, ubifs may pass
489 * buffers that does not belong to kernel lowmem region.
490 */
491 while (readsize != 0) {
492 size_t xfer_len = min_t(size_t, QSPI_DMA_BUFFER_SIZE,
493 readsize);
494
495 ret = ti_qspi_dma_xfer(qspi, qspi->rx_bb_dma_addr,
496 dma_src, xfer_len);
497 if (ret != 0)
498 return ret;
499 memcpy(to, qspi->rx_bb_addr, xfer_len);
500 readsize -= xfer_len;
501 dma_src += xfer_len;
502 to += xfer_len;
503 }
504
505 return ret;
506}
507
508static int ti_qspi_dma_xfer_sg(struct ti_qspi *qspi, struct sg_table rx_sg,
509 loff_t from)
510{
511 struct scatterlist *sg;
512 dma_addr_t dma_src = qspi->mmap_phys_base + from;
513 dma_addr_t dma_dst;
514 int i, len, ret;
515
516 for_each_sg(rx_sg.sgl, sg, rx_sg.nents, i) {
517 dma_dst = sg_dma_address(sg);
518 len = sg_dma_len(sg);
519 ret = ti_qspi_dma_xfer(qspi, dma_dst, dma_src, len);
520 if (ret)
521 return ret;
522 dma_src += len;
523 }
524
525 return 0;
526}
527
528static void ti_qspi_enable_memory_map(struct spi_device *spi)
529{
530 struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
531
532 ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG);
533 if (qspi->ctrl_base) {
534 regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
535 MEM_CS_MASK,
536 MEM_CS_EN(spi->chip_select));
537 }
538 qspi->mmap_enabled = true;
539 qspi->current_cs = spi->chip_select;
540}
541
542static void ti_qspi_disable_memory_map(struct spi_device *spi)
543{
544 struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
545
546 ti_qspi_write(qspi, 0, QSPI_SPI_SWITCH_REG);
547 if (qspi->ctrl_base)
548 regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
549 MEM_CS_MASK, 0);
550 qspi->mmap_enabled = false;
551 qspi->current_cs = -1;
552}
553
554static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
555 u8 data_nbits, u8 addr_width,
556 u8 dummy_bytes)
557{
558 struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
559 u32 memval = opcode;
560
561 switch (data_nbits) {
562 case SPI_NBITS_QUAD:
563 memval |= QSPI_SETUP_RD_QUAD;
564 break;
565 case SPI_NBITS_DUAL:
566 memval |= QSPI_SETUP_RD_DUAL;
567 break;
568 default:
569 memval |= QSPI_SETUP_RD_NORMAL;
570 break;
571 }
572 memval |= ((addr_width - 1) << QSPI_SETUP_ADDR_SHIFT |
573 dummy_bytes << QSPI_SETUP_DUMMY_SHIFT);
574 ti_qspi_write(qspi, memval,
575 QSPI_SPI_SETUP_REG(spi->chip_select));
576}
577
578static int ti_qspi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
579{
580 struct ti_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
581 size_t max_len;
582
583 if (op->data.dir == SPI_MEM_DATA_IN) {
584 if (op->addr.val < qspi->mmap_size) {
585 /* Limit MMIO to the mmaped region */
586 if (op->addr.val + op->data.nbytes > qspi->mmap_size) {
587 max_len = qspi->mmap_size - op->addr.val;
588 op->data.nbytes = min((size_t) op->data.nbytes,
589 max_len);
590 }
591 } else {
592 /*
593 * Use fallback mode (SW generated transfers) above the
594 * mmaped region.
595 * Adjust size to comply with the QSPI max frame length.
596 */
597 max_len = QSPI_FRAME;
598 max_len -= 1 + op->addr.nbytes + op->dummy.nbytes;
599 op->data.nbytes = min((size_t) op->data.nbytes,
600 max_len);
601 }
602 }
603
604 return 0;
605}
606
607static int ti_qspi_exec_mem_op(struct spi_mem *mem,
608 const struct spi_mem_op *op)
609{
610 struct ti_qspi *qspi = spi_master_get_devdata(mem->spi->master);
611 u32 from = 0;
612 int ret = 0;
613
614 /* Only optimize read path. */
615 if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
616 !op->addr.nbytes || op->addr.nbytes > 4)
617 return -ENOTSUPP;
618
619 /* Address exceeds MMIO window size, fall back to regular mode. */
620 from = op->addr.val;
621 if (from + op->data.nbytes > qspi->mmap_size)
622 return -ENOTSUPP;
623
624 mutex_lock(&qspi->list_lock);
625
626 if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
627 ti_qspi_enable_memory_map(mem->spi);
628 ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
629 op->addr.nbytes, op->dummy.nbytes);
630
631 if (qspi->rx_chan) {
632 struct sg_table sgt;
633
634 if (virt_addr_valid(op->data.buf.in) &&
635 !spi_controller_dma_map_mem_op_data(mem->spi->master, op,
636 &sgt)) {
637 ret = ti_qspi_dma_xfer_sg(qspi, sgt, from);
638 spi_controller_dma_unmap_mem_op_data(mem->spi->master,
639 op, &sgt);
640 } else {
641 ret = ti_qspi_dma_bounce_buffer(qspi, from,
642 op->data.buf.in,
643 op->data.nbytes);
644 }
645 } else {
646 memcpy_fromio(op->data.buf.in, qspi->mmap_base + from,
647 op->data.nbytes);
648 }
649
650 mutex_unlock(&qspi->list_lock);
651
652 return ret;
653}
654
655static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
656 .exec_op = ti_qspi_exec_mem_op,
657 .adjust_op_size = ti_qspi_adjust_op_size,
658};
659
660static int ti_qspi_start_transfer_one(struct spi_master *master,
661 struct spi_message *m)
662{
663 struct ti_qspi *qspi = spi_master_get_devdata(master);
664 struct spi_device *spi = m->spi;
665 struct spi_transfer *t;
666 int status = 0, ret;
667 unsigned int frame_len_words, transfer_len_words;
668 int wlen;
669
670 /* setup device control reg */
671 qspi->dc = 0;
672
673 if (spi->mode & SPI_CPHA)
674 qspi->dc |= QSPI_CKPHA(spi->chip_select);
675 if (spi->mode & SPI_CPOL)
676 qspi->dc |= QSPI_CKPOL(spi->chip_select);
677 if (spi->mode & SPI_CS_HIGH)
678 qspi->dc |= QSPI_CSPOL(spi->chip_select);
679
680 frame_len_words = 0;
681 list_for_each_entry(t, &m->transfers, transfer_list)
682 frame_len_words += t->len / (t->bits_per_word >> 3);
683 frame_len_words = min_t(unsigned int, frame_len_words, QSPI_FRAME);
684
685 /* setup command reg */
686 qspi->cmd = 0;
687 qspi->cmd |= QSPI_EN_CS(spi->chip_select);
688 qspi->cmd |= QSPI_FLEN(frame_len_words);
689
690 ti_qspi_write(qspi, qspi->dc, QSPI_SPI_DC_REG);
691
692 mutex_lock(&qspi->list_lock);
693
694 if (qspi->mmap_enabled)
695 ti_qspi_disable_memory_map(spi);
696
697 list_for_each_entry(t, &m->transfers, transfer_list) {
698 qspi->cmd = ((qspi->cmd & ~QSPI_WLEN_MASK) |
699 QSPI_WLEN(t->bits_per_word));
700
701 wlen = t->bits_per_word >> 3;
702 transfer_len_words = min(t->len / wlen, frame_len_words);
703
704 ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
705 if (ret) {
706 dev_dbg(qspi->dev, "transfer message failed\n");
707 mutex_unlock(&qspi->list_lock);
708 return -EINVAL;
709 }
710
711 m->actual_length += transfer_len_words * wlen;
712 frame_len_words -= transfer_len_words;
713 if (frame_len_words == 0)
714 break;
715 }
716
717 mutex_unlock(&qspi->list_lock);
718
719 ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG);
720 m->status = status;
721 spi_finalize_current_message(master);
722
723 return status;
724}
725
726static int ti_qspi_runtime_resume(struct device *dev)
727{
728 struct ti_qspi *qspi;
729
730 qspi = dev_get_drvdata(dev);
731 ti_qspi_restore_ctx(qspi);
732
733 return 0;
734}
735
736static void ti_qspi_dma_cleanup(struct ti_qspi *qspi)
737{
738 if (qspi->rx_bb_addr)
739 dma_free_coherent(qspi->dev, QSPI_DMA_BUFFER_SIZE,
740 qspi->rx_bb_addr,
741 qspi->rx_bb_dma_addr);
742
743 if (qspi->rx_chan)
744 dma_release_channel(qspi->rx_chan);
745}
746
747static const struct of_device_id ti_qspi_match[] = {
748 {.compatible = "ti,dra7xxx-qspi" },
749 {.compatible = "ti,am4372-qspi" },
750 {},
751};
752MODULE_DEVICE_TABLE(of, ti_qspi_match);
753
754static int ti_qspi_probe(struct platform_device *pdev)
755{
756 struct ti_qspi *qspi;
757 struct spi_master *master;
758 struct resource *r, *res_mmap;
759 struct device_node *np = pdev->dev.of_node;
760 u32 max_freq;
761 int ret = 0, num_cs, irq;
762 dma_cap_mask_t mask;
763
764 master = spi_alloc_master(&pdev->dev, sizeof(*qspi));
765 if (!master)
766 return -ENOMEM;
767
768 master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD;
769
770 master->flags = SPI_MASTER_HALF_DUPLEX;
771 master->setup = ti_qspi_setup;
772 master->auto_runtime_pm = true;
773 master->transfer_one_message = ti_qspi_start_transfer_one;
774 master->dev.of_node = pdev->dev.of_node;
775 master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
776 SPI_BPW_MASK(8);
777 master->mem_ops = &ti_qspi_mem_ops;
778
779 if (!of_property_read_u32(np, "num-cs", &num_cs))
780 master->num_chipselect = num_cs;
781
782 qspi = spi_master_get_devdata(master);
783 qspi->master = master;
784 qspi->dev = &pdev->dev;
785 platform_set_drvdata(pdev, qspi);
786
787 r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base");
788 if (r == NULL) {
789 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
790 if (r == NULL) {
791 dev_err(&pdev->dev, "missing platform data\n");
792 ret = -ENODEV;
793 goto free_master;
794 }
795 }
796
797 res_mmap = platform_get_resource_byname(pdev,
798 IORESOURCE_MEM, "qspi_mmap");
799 if (res_mmap == NULL) {
800 res_mmap = platform_get_resource(pdev, IORESOURCE_MEM, 1);
801 if (res_mmap == NULL) {
802 dev_err(&pdev->dev,
803 "memory mapped resource not required\n");
804 }
805 }
806
807 if (res_mmap)
808 qspi->mmap_size = resource_size(res_mmap);
809
810 irq = platform_get_irq(pdev, 0);
811 if (irq < 0) {
812 ret = irq;
813 goto free_master;
814 }
815
816 mutex_init(&qspi->list_lock);
817
818 qspi->base = devm_ioremap_resource(&pdev->dev, r);
819 if (IS_ERR(qspi->base)) {
820 ret = PTR_ERR(qspi->base);
821 goto free_master;
822 }
823
824
825 if (of_property_read_bool(np, "syscon-chipselects")) {
826 qspi->ctrl_base =
827 syscon_regmap_lookup_by_phandle(np,
828 "syscon-chipselects");
829 if (IS_ERR(qspi->ctrl_base)) {
830 ret = PTR_ERR(qspi->ctrl_base);
831 goto free_master;
832 }
833 ret = of_property_read_u32_index(np,
834 "syscon-chipselects",
835 1, &qspi->ctrl_reg);
836 if (ret) {
837 dev_err(&pdev->dev,
838 "couldn't get ctrl_mod reg index\n");
839 goto free_master;
840 }
841 }
842
843 qspi->fclk = devm_clk_get(&pdev->dev, "fck");
844 if (IS_ERR(qspi->fclk)) {
845 ret = PTR_ERR(qspi->fclk);
846 dev_err(&pdev->dev, "could not get clk: %d\n", ret);
847 }
848
849 pm_runtime_use_autosuspend(&pdev->dev);
850 pm_runtime_set_autosuspend_delay(&pdev->dev, QSPI_AUTOSUSPEND_TIMEOUT);
851 pm_runtime_enable(&pdev->dev);
852
853 if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
854 qspi->spi_max_frequency = max_freq;
855
856 dma_cap_zero(mask);
857 dma_cap_set(DMA_MEMCPY, mask);
858
859 qspi->rx_chan = dma_request_chan_by_mask(&mask);
860 if (IS_ERR(qspi->rx_chan)) {
861 dev_err(qspi->dev,
862 "No Rx DMA available, trying mmap mode\n");
863 qspi->rx_chan = NULL;
864 ret = 0;
865 goto no_dma;
866 }
867 qspi->rx_bb_addr = dma_alloc_coherent(qspi->dev,
868 QSPI_DMA_BUFFER_SIZE,
869 &qspi->rx_bb_dma_addr,
870 GFP_KERNEL | GFP_DMA);
871 if (!qspi->rx_bb_addr) {
872 dev_err(qspi->dev,
873 "dma_alloc_coherent failed, using PIO mode\n");
874 dma_release_channel(qspi->rx_chan);
875 goto no_dma;
876 }
877 master->dma_rx = qspi->rx_chan;
878 init_completion(&qspi->transfer_complete);
879 if (res_mmap)
880 qspi->mmap_phys_base = (dma_addr_t)res_mmap->start;
881
882no_dma:
883 if (!qspi->rx_chan && res_mmap) {
884 qspi->mmap_base = devm_ioremap_resource(&pdev->dev, res_mmap);
885 if (IS_ERR(qspi->mmap_base)) {
886 dev_info(&pdev->dev,
887 "mmap failed with error %ld using PIO mode\n",
888 PTR_ERR(qspi->mmap_base));
889 qspi->mmap_base = NULL;
890 master->mem_ops = NULL;
891 }
892 }
893 qspi->mmap_enabled = false;
894 qspi->current_cs = -1;
895
896 ret = devm_spi_register_master(&pdev->dev, master);
897 if (!ret)
898 return 0;
899
900 ti_qspi_dma_cleanup(qspi);
901
902 pm_runtime_disable(&pdev->dev);
903free_master:
904 spi_master_put(master);
905 return ret;
906}
907
908static int ti_qspi_remove(struct platform_device *pdev)
909{
910 struct ti_qspi *qspi = platform_get_drvdata(pdev);
911 int rc;
912
913 rc = spi_master_suspend(qspi->master);
914 if (rc)
915 return rc;
916
917 pm_runtime_put_sync(&pdev->dev);
918 pm_runtime_disable(&pdev->dev);
919
920 ti_qspi_dma_cleanup(qspi);
921
922 return 0;
923}
924
925static const struct dev_pm_ops ti_qspi_pm_ops = {
926 .runtime_resume = ti_qspi_runtime_resume,
927};
928
929static struct platform_driver ti_qspi_driver = {
930 .probe = ti_qspi_probe,
931 .remove = ti_qspi_remove,
932 .driver = {
933 .name = "ti-qspi",
934 .pm = &ti_qspi_pm_ops,
935 .of_match_table = ti_qspi_match,
936 }
937};
938
939module_platform_driver(ti_qspi_driver);
940
941MODULE_AUTHOR("Sourav Poddar <sourav.poddar@ti.com>");
942MODULE_LICENSE("GPL v2");
943MODULE_DESCRIPTION("TI QSPI controller driver");
944MODULE_ALIAS("platform:ti-qspi");