Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * ASIX AX8817X based USB 2.0 Ethernet Devices
4 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
5 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
6 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
7 * Copyright (c) 2002-2003 TiVo Inc.
8 */
9
10#include "asix.h"
11
12#define PHY_MODE_MARVELL 0x0000
13#define MII_MARVELL_LED_CTRL 0x0018
14#define MII_MARVELL_STATUS 0x001b
15#define MII_MARVELL_CTRL 0x0014
16
17#define MARVELL_LED_MANUAL 0x0019
18
19#define MARVELL_STATUS_HWCFG 0x0004
20
21#define MARVELL_CTRL_TXDELAY 0x0002
22#define MARVELL_CTRL_RXDELAY 0x0080
23
24#define PHY_MODE_RTL8211CL 0x000C
25
26#define AX88772A_PHY14H 0x14
27#define AX88772A_PHY14H_DEFAULT 0x442C
28
29#define AX88772A_PHY15H 0x15
30#define AX88772A_PHY15H_DEFAULT 0x03C8
31
32#define AX88772A_PHY16H 0x16
33#define AX88772A_PHY16H_DEFAULT 0x4044
34
35struct ax88172_int_data {
36 __le16 res1;
37 u8 link;
38 __le16 res2;
39 u8 status;
40 __le16 res3;
41} __packed;
42
43static void asix_status(struct usbnet *dev, struct urb *urb)
44{
45 struct ax88172_int_data *event;
46 int link;
47
48 if (urb->actual_length < 8)
49 return;
50
51 event = urb->transfer_buffer;
52 link = event->link & 0x01;
53 if (netif_carrier_ok(dev->net) != link) {
54 usbnet_link_change(dev, link, 1);
55 netdev_dbg(dev->net, "Link Status is: %d\n", link);
56 }
57}
58
59static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
60{
61 if (is_valid_ether_addr(addr)) {
62 memcpy(dev->net->dev_addr, addr, ETH_ALEN);
63 } else {
64 netdev_info(dev->net, "invalid hw address, using random\n");
65 eth_hw_addr_random(dev->net);
66 }
67}
68
69/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
70static u32 asix_get_phyid(struct usbnet *dev)
71{
72 int phy_reg;
73 u32 phy_id;
74 int i;
75
76 /* Poll for the rare case the FW or phy isn't ready yet. */
77 for (i = 0; i < 100; i++) {
78 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
79 if (phy_reg < 0)
80 return 0;
81 if (phy_reg != 0 && phy_reg != 0xFFFF)
82 break;
83 mdelay(1);
84 }
85
86 if (phy_reg <= 0 || phy_reg == 0xFFFF)
87 return 0;
88
89 phy_id = (phy_reg & 0xffff) << 16;
90
91 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
92 if (phy_reg < 0)
93 return 0;
94
95 phy_id |= (phy_reg & 0xffff);
96
97 return phy_id;
98}
99
100static u32 asix_get_link(struct net_device *net)
101{
102 struct usbnet *dev = netdev_priv(net);
103
104 return mii_link_ok(&dev->mii);
105}
106
107static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
108{
109 struct usbnet *dev = netdev_priv(net);
110
111 return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
112}
113
114/* We need to override some ethtool_ops so we require our
115 own structure so we don't interfere with other usbnet
116 devices that may be connected at the same time. */
117static const struct ethtool_ops ax88172_ethtool_ops = {
118 .get_drvinfo = asix_get_drvinfo,
119 .get_link = asix_get_link,
120 .get_msglevel = usbnet_get_msglevel,
121 .set_msglevel = usbnet_set_msglevel,
122 .get_wol = asix_get_wol,
123 .set_wol = asix_set_wol,
124 .get_eeprom_len = asix_get_eeprom_len,
125 .get_eeprom = asix_get_eeprom,
126 .set_eeprom = asix_set_eeprom,
127 .nway_reset = usbnet_nway_reset,
128 .get_link_ksettings = usbnet_get_link_ksettings_mii,
129 .set_link_ksettings = usbnet_set_link_ksettings_mii,
130};
131
132static void ax88172_set_multicast(struct net_device *net)
133{
134 struct usbnet *dev = netdev_priv(net);
135 struct asix_data *data = (struct asix_data *)&dev->data;
136 u8 rx_ctl = 0x8c;
137
138 if (net->flags & IFF_PROMISC) {
139 rx_ctl |= 0x01;
140 } else if (net->flags & IFF_ALLMULTI ||
141 netdev_mc_count(net) > AX_MAX_MCAST) {
142 rx_ctl |= 0x02;
143 } else if (netdev_mc_empty(net)) {
144 /* just broadcast and directed */
145 } else {
146 /* We use the 20 byte dev->data
147 * for our 8 byte filter buffer
148 * to avoid allocating memory that
149 * is tricky to free later */
150 struct netdev_hw_addr *ha;
151 u32 crc_bits;
152
153 memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
154
155 /* Build the multicast hash filter. */
156 netdev_for_each_mc_addr(ha, net) {
157 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
158 data->multi_filter[crc_bits >> 3] |=
159 1 << (crc_bits & 7);
160 }
161
162 asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
163 AX_MCAST_FILTER_SIZE, data->multi_filter);
164
165 rx_ctl |= 0x10;
166 }
167
168 asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
169}
170
171static int ax88172_link_reset(struct usbnet *dev)
172{
173 u8 mode;
174 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
175
176 mii_check_media(&dev->mii, 1, 1);
177 mii_ethtool_gset(&dev->mii, &ecmd);
178 mode = AX88172_MEDIUM_DEFAULT;
179
180 if (ecmd.duplex != DUPLEX_FULL)
181 mode |= ~AX88172_MEDIUM_FD;
182
183 netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
184 ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
185
186 asix_write_medium_mode(dev, mode, 0);
187
188 return 0;
189}
190
191static const struct net_device_ops ax88172_netdev_ops = {
192 .ndo_open = usbnet_open,
193 .ndo_stop = usbnet_stop,
194 .ndo_start_xmit = usbnet_start_xmit,
195 .ndo_tx_timeout = usbnet_tx_timeout,
196 .ndo_change_mtu = usbnet_change_mtu,
197 .ndo_get_stats64 = dev_get_tstats64,
198 .ndo_set_mac_address = eth_mac_addr,
199 .ndo_validate_addr = eth_validate_addr,
200 .ndo_do_ioctl = asix_ioctl,
201 .ndo_set_rx_mode = ax88172_set_multicast,
202};
203
204static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
205{
206 unsigned int timeout = 5000;
207
208 asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
209
210 /* give phy_id a chance to process reset */
211 udelay(500);
212
213 /* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
214 while (timeout--) {
215 if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
216 & BMCR_RESET)
217 udelay(100);
218 else
219 return;
220 }
221
222 netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
223 dev->mii.phy_id);
224}
225
226static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
227{
228 int ret = 0;
229 u8 buf[ETH_ALEN] = {0};
230 int i;
231 unsigned long gpio_bits = dev->driver_info->data;
232
233 usbnet_get_endpoints(dev,intf);
234
235 /* Toggle the GPIOs in a manufacturer/model specific way */
236 for (i = 2; i >= 0; i--) {
237 ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
238 (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
239 if (ret < 0)
240 goto out;
241 msleep(5);
242 }
243
244 ret = asix_write_rx_ctl(dev, 0x80, 0);
245 if (ret < 0)
246 goto out;
247
248 /* Get the MAC address */
249 ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
250 0, 0, ETH_ALEN, buf, 0);
251 if (ret < 0) {
252 netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
253 ret);
254 goto out;
255 }
256
257 asix_set_netdev_dev_addr(dev, buf);
258
259 /* Initialize MII structure */
260 dev->mii.dev = dev->net;
261 dev->mii.mdio_read = asix_mdio_read;
262 dev->mii.mdio_write = asix_mdio_write;
263 dev->mii.phy_id_mask = 0x3f;
264 dev->mii.reg_num_mask = 0x1f;
265
266 dev->mii.phy_id = asix_read_phy_addr(dev, true);
267 if (dev->mii.phy_id < 0)
268 return dev->mii.phy_id;
269
270 dev->net->netdev_ops = &ax88172_netdev_ops;
271 dev->net->ethtool_ops = &ax88172_ethtool_ops;
272 dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
273 dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
274
275 asix_phy_reset(dev, BMCR_RESET);
276 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
277 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
278 mii_nway_restart(&dev->mii);
279
280 return 0;
281
282out:
283 return ret;
284}
285
286static void ax88772_ethtool_get_strings(struct net_device *netdev, u32 sset,
287 u8 *data)
288{
289 switch (sset) {
290 case ETH_SS_TEST:
291 net_selftest_get_strings(data);
292 break;
293 }
294}
295
296static int ax88772_ethtool_get_sset_count(struct net_device *ndev, int sset)
297{
298 switch (sset) {
299 case ETH_SS_TEST:
300 return net_selftest_get_count();
301 default:
302 return -EOPNOTSUPP;
303 }
304}
305
306static const struct ethtool_ops ax88772_ethtool_ops = {
307 .get_drvinfo = asix_get_drvinfo,
308 .get_link = usbnet_get_link,
309 .get_msglevel = usbnet_get_msglevel,
310 .set_msglevel = usbnet_set_msglevel,
311 .get_wol = asix_get_wol,
312 .set_wol = asix_set_wol,
313 .get_eeprom_len = asix_get_eeprom_len,
314 .get_eeprom = asix_get_eeprom,
315 .set_eeprom = asix_set_eeprom,
316 .nway_reset = phy_ethtool_nway_reset,
317 .get_link_ksettings = phy_ethtool_get_link_ksettings,
318 .set_link_ksettings = phy_ethtool_set_link_ksettings,
319 .self_test = net_selftest,
320 .get_strings = ax88772_ethtool_get_strings,
321 .get_sset_count = ax88772_ethtool_get_sset_count,
322};
323
324static int ax88772_reset(struct usbnet *dev)
325{
326 struct asix_data *data = (struct asix_data *)&dev->data;
327 struct asix_common_private *priv = dev->driver_priv;
328 int ret;
329
330 /* Rewrite MAC address */
331 ether_addr_copy(data->mac_addr, dev->net->dev_addr);
332 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
333 ETH_ALEN, data->mac_addr, 0);
334 if (ret < 0)
335 goto out;
336
337 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
338 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
339 if (ret < 0)
340 goto out;
341
342 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
343 if (ret < 0)
344 goto out;
345
346 phy_start(priv->phydev);
347
348 return 0;
349
350out:
351 return ret;
352}
353
354static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
355{
356 struct asix_data *data = (struct asix_data *)&dev->data;
357 struct asix_common_private *priv = dev->driver_priv;
358 u16 rx_ctl;
359 int ret;
360
361 ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
362 AX_GPIO_GPO2EN, 5, in_pm);
363 if (ret < 0)
364 goto out;
365
366 ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy,
367 0, 0, NULL, in_pm);
368 if (ret < 0) {
369 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
370 goto out;
371 }
372
373 if (priv->embd_phy) {
374 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
375 if (ret < 0)
376 goto out;
377
378 usleep_range(10000, 11000);
379
380 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
381 if (ret < 0)
382 goto out;
383
384 msleep(60);
385
386 ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
387 in_pm);
388 if (ret < 0)
389 goto out;
390 } else {
391 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
392 in_pm);
393 if (ret < 0)
394 goto out;
395 }
396
397 msleep(150);
398
399 if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
400 MII_PHYSID1))){
401 ret = -EIO;
402 goto out;
403 }
404
405 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
406 if (ret < 0)
407 goto out;
408
409 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
410 if (ret < 0)
411 goto out;
412
413 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
414 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
415 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
416 if (ret < 0) {
417 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
418 goto out;
419 }
420
421 /* Rewrite MAC address */
422 ether_addr_copy(data->mac_addr, dev->net->dev_addr);
423 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
424 ETH_ALEN, data->mac_addr, in_pm);
425 if (ret < 0)
426 goto out;
427
428 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
429 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
430 if (ret < 0)
431 goto out;
432
433 rx_ctl = asix_read_rx_ctl(dev, in_pm);
434 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
435 rx_ctl);
436
437 rx_ctl = asix_read_medium_status(dev, in_pm);
438 netdev_dbg(dev->net,
439 "Medium Status is 0x%04x after all initializations\n",
440 rx_ctl);
441
442 return 0;
443
444out:
445 return ret;
446}
447
448static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
449{
450 struct asix_data *data = (struct asix_data *)&dev->data;
451 struct asix_common_private *priv = dev->driver_priv;
452 u16 rx_ctl, phy14h, phy15h, phy16h;
453 u8 chipcode = 0;
454 int ret;
455
456 ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
457 if (ret < 0)
458 goto out;
459
460 ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy |
461 AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
462 if (ret < 0) {
463 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
464 goto out;
465 }
466 usleep_range(10000, 11000);
467
468 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
469 if (ret < 0)
470 goto out;
471
472 usleep_range(10000, 11000);
473
474 ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
475 if (ret < 0)
476 goto out;
477
478 msleep(160);
479
480 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
481 if (ret < 0)
482 goto out;
483
484 ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
485 if (ret < 0)
486 goto out;
487
488 msleep(200);
489
490 if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
491 MII_PHYSID1))) {
492 ret = -1;
493 goto out;
494 }
495
496 ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
497 0, 1, &chipcode, in_pm);
498 if (ret < 0)
499 goto out;
500
501 if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
502 ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
503 0, NULL, in_pm);
504 if (ret < 0) {
505 netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
506 ret);
507 goto out;
508 }
509 } else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
510 /* Check if the PHY registers have default settings */
511 phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
512 AX88772A_PHY14H);
513 phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
514 AX88772A_PHY15H);
515 phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
516 AX88772A_PHY16H);
517
518 netdev_dbg(dev->net,
519 "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
520 phy14h, phy15h, phy16h);
521
522 /* Restore PHY registers default setting if not */
523 if (phy14h != AX88772A_PHY14H_DEFAULT)
524 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
525 AX88772A_PHY14H,
526 AX88772A_PHY14H_DEFAULT);
527 if (phy15h != AX88772A_PHY15H_DEFAULT)
528 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
529 AX88772A_PHY15H,
530 AX88772A_PHY15H_DEFAULT);
531 if (phy16h != AX88772A_PHY16H_DEFAULT)
532 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
533 AX88772A_PHY16H,
534 AX88772A_PHY16H_DEFAULT);
535 }
536
537 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
538 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
539 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
540 if (ret < 0) {
541 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
542 goto out;
543 }
544
545 /* Rewrite MAC address */
546 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
547 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
548 data->mac_addr, in_pm);
549 if (ret < 0)
550 goto out;
551
552 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
553 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
554 if (ret < 0)
555 goto out;
556
557 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
558 if (ret < 0)
559 return ret;
560
561 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
562 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
563 if (ret < 0)
564 goto out;
565
566 rx_ctl = asix_read_rx_ctl(dev, in_pm);
567 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
568 rx_ctl);
569
570 rx_ctl = asix_read_medium_status(dev, in_pm);
571 netdev_dbg(dev->net,
572 "Medium Status is 0x%04x after all initializations\n",
573 rx_ctl);
574
575 return 0;
576
577out:
578 return ret;
579}
580
581static const struct net_device_ops ax88772_netdev_ops = {
582 .ndo_open = usbnet_open,
583 .ndo_stop = usbnet_stop,
584 .ndo_start_xmit = usbnet_start_xmit,
585 .ndo_tx_timeout = usbnet_tx_timeout,
586 .ndo_change_mtu = usbnet_change_mtu,
587 .ndo_get_stats64 = dev_get_tstats64,
588 .ndo_set_mac_address = asix_set_mac_address,
589 .ndo_validate_addr = eth_validate_addr,
590 .ndo_do_ioctl = phy_do_ioctl_running,
591 .ndo_set_rx_mode = asix_set_multicast,
592};
593
594static void ax88772_suspend(struct usbnet *dev)
595{
596 struct asix_common_private *priv = dev->driver_priv;
597 u16 medium;
598
599 if (netif_running(dev->net))
600 phy_stop(priv->phydev);
601
602 /* Stop MAC operation */
603 medium = asix_read_medium_status(dev, 1);
604 medium &= ~AX_MEDIUM_RE;
605 asix_write_medium_mode(dev, medium, 1);
606
607 netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
608 asix_read_medium_status(dev, 1));
609}
610
611static int asix_suspend(struct usb_interface *intf, pm_message_t message)
612{
613 struct usbnet *dev = usb_get_intfdata(intf);
614 struct asix_common_private *priv = dev->driver_priv;
615
616 if (priv && priv->suspend)
617 priv->suspend(dev);
618
619 return usbnet_suspend(intf, message);
620}
621
622static void ax88772_resume(struct usbnet *dev)
623{
624 struct asix_common_private *priv = dev->driver_priv;
625 int i;
626
627 for (i = 0; i < 3; i++)
628 if (!ax88772_hw_reset(dev, 1))
629 break;
630
631 if (netif_running(dev->net))
632 phy_start(priv->phydev);
633}
634
635static void ax88772a_resume(struct usbnet *dev)
636{
637 struct asix_common_private *priv = dev->driver_priv;
638 int i;
639
640 for (i = 0; i < 3; i++) {
641 if (!ax88772a_hw_reset(dev, 1))
642 break;
643 }
644
645 if (netif_running(dev->net))
646 phy_start(priv->phydev);
647}
648
649static int asix_resume(struct usb_interface *intf)
650{
651 struct usbnet *dev = usb_get_intfdata(intf);
652 struct asix_common_private *priv = dev->driver_priv;
653
654 if (priv && priv->resume)
655 priv->resume(dev);
656
657 return usbnet_resume(intf);
658}
659
660static int ax88772_init_mdio(struct usbnet *dev)
661{
662 struct asix_common_private *priv = dev->driver_priv;
663
664 priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
665 if (!priv->mdio)
666 return -ENOMEM;
667
668 priv->mdio->priv = dev;
669 priv->mdio->read = &asix_mdio_bus_read;
670 priv->mdio->write = &asix_mdio_bus_write;
671 priv->mdio->name = "Asix MDIO Bus";
672 /* mii bus name is usb-<usb bus number>-<usb device number> */
673 snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
674 dev->udev->bus->busnum, dev->udev->devnum);
675
676 return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
677}
678
679static int ax88772_init_phy(struct usbnet *dev)
680{
681 struct asix_common_private *priv = dev->driver_priv;
682 int ret;
683
684 snprintf(priv->phy_name, sizeof(priv->phy_name), PHY_ID_FMT,
685 priv->mdio->id, priv->phy_addr);
686
687 priv->phydev = phy_connect(dev->net, priv->phy_name, &asix_adjust_link,
688 PHY_INTERFACE_MODE_INTERNAL);
689 if (IS_ERR(priv->phydev)) {
690 netdev_err(dev->net, "Could not connect to PHY device %s\n",
691 priv->phy_name);
692 ret = PTR_ERR(priv->phydev);
693 return ret;
694 }
695
696 phy_suspend(priv->phydev);
697 priv->phydev->mac_managed_pm = 1;
698
699 phy_attached_info(priv->phydev);
700
701 return 0;
702}
703
704static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
705{
706 u8 buf[ETH_ALEN] = {0}, chipcode = 0;
707 struct asix_common_private *priv;
708 int ret, i;
709 u32 phyid;
710
711 priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
712 if (!priv)
713 return -ENOMEM;
714
715 dev->driver_priv = priv;
716
717 usbnet_get_endpoints(dev, intf);
718
719 /* Maybe the boot loader passed the MAC address via device tree */
720 if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) {
721 netif_dbg(dev, ifup, dev->net,
722 "MAC address read from device tree");
723 } else {
724 /* Try getting the MAC address from EEPROM */
725 if (dev->driver_info->data & FLAG_EEPROM_MAC) {
726 for (i = 0; i < (ETH_ALEN >> 1); i++) {
727 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM,
728 0x04 + i, 0, 2, buf + i * 2,
729 0);
730 if (ret < 0)
731 break;
732 }
733 } else {
734 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
735 0, 0, ETH_ALEN, buf, 0);
736 }
737
738 if (ret < 0) {
739 netdev_dbg(dev->net, "Failed to read MAC address: %d\n",
740 ret);
741 return ret;
742 }
743 }
744
745 asix_set_netdev_dev_addr(dev, buf);
746
747 dev->net->netdev_ops = &ax88772_netdev_ops;
748 dev->net->ethtool_ops = &ax88772_ethtool_ops;
749 dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
750 dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
751
752 ret = asix_read_phy_addr(dev, true);
753 if (ret < 0)
754 return ret;
755
756 priv->phy_addr = ret;
757 priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10);
758
759 asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
760 chipcode &= AX_CHIPCODE_MASK;
761
762 ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
763 ax88772a_hw_reset(dev, 0);
764
765 if (ret < 0) {
766 netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
767 return ret;
768 }
769
770 /* Read PHYID register *AFTER* the PHY was reset properly */
771 phyid = asix_get_phyid(dev);
772 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
773
774 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
775 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
776 /* hard_mtu is still the default - the device does not support
777 jumbo eth frames */
778 dev->rx_urb_size = 2048;
779 }
780
781 priv->presvd_phy_bmcr = 0;
782 priv->presvd_phy_advertise = 0;
783 if (chipcode == AX_AX88772_CHIPCODE) {
784 priv->resume = ax88772_resume;
785 priv->suspend = ax88772_suspend;
786 } else {
787 priv->resume = ax88772a_resume;
788 priv->suspend = ax88772_suspend;
789 }
790
791 ret = ax88772_init_mdio(dev);
792 if (ret)
793 return ret;
794
795 return ax88772_init_phy(dev);
796}
797
798static int ax88772_stop(struct usbnet *dev)
799{
800 struct asix_common_private *priv = dev->driver_priv;
801
802 /* On unplugged USB, we will get MDIO communication errors and the
803 * PHY will be set in to PHY_HALTED state.
804 */
805 if (priv->phydev->state != PHY_HALTED)
806 phy_stop(priv->phydev);
807
808 return 0;
809}
810
811static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
812{
813 struct asix_common_private *priv = dev->driver_priv;
814
815 phy_disconnect(priv->phydev);
816 asix_rx_fixup_common_free(dev->driver_priv);
817}
818
819static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
820{
821 asix_rx_fixup_common_free(dev->driver_priv);
822 kfree(dev->driver_priv);
823}
824
825static const struct ethtool_ops ax88178_ethtool_ops = {
826 .get_drvinfo = asix_get_drvinfo,
827 .get_link = asix_get_link,
828 .get_msglevel = usbnet_get_msglevel,
829 .set_msglevel = usbnet_set_msglevel,
830 .get_wol = asix_get_wol,
831 .set_wol = asix_set_wol,
832 .get_eeprom_len = asix_get_eeprom_len,
833 .get_eeprom = asix_get_eeprom,
834 .set_eeprom = asix_set_eeprom,
835 .nway_reset = usbnet_nway_reset,
836 .get_link_ksettings = usbnet_get_link_ksettings_mii,
837 .set_link_ksettings = usbnet_set_link_ksettings_mii,
838};
839
840static int marvell_phy_init(struct usbnet *dev)
841{
842 struct asix_data *data = (struct asix_data *)&dev->data;
843 u16 reg;
844
845 netdev_dbg(dev->net, "marvell_phy_init()\n");
846
847 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
848 netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
849
850 asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
851 MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
852
853 if (data->ledmode) {
854 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
855 MII_MARVELL_LED_CTRL);
856 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
857
858 reg &= 0xf8ff;
859 reg |= (1 + 0x0100);
860 asix_mdio_write(dev->net, dev->mii.phy_id,
861 MII_MARVELL_LED_CTRL, reg);
862
863 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
864 MII_MARVELL_LED_CTRL);
865 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
866 reg &= 0xfc0f;
867 }
868
869 return 0;
870}
871
872static int rtl8211cl_phy_init(struct usbnet *dev)
873{
874 struct asix_data *data = (struct asix_data *)&dev->data;
875
876 netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
877
878 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
879 asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
880 asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
881 asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
882 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
883
884 if (data->ledmode == 12) {
885 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
886 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
887 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
888 }
889
890 return 0;
891}
892
893static int marvell_led_status(struct usbnet *dev, u16 speed)
894{
895 u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
896
897 netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
898
899 /* Clear out the center LED bits - 0x03F0 */
900 reg &= 0xfc0f;
901
902 switch (speed) {
903 case SPEED_1000:
904 reg |= 0x03e0;
905 break;
906 case SPEED_100:
907 reg |= 0x03b0;
908 break;
909 default:
910 reg |= 0x02f0;
911 }
912
913 netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
914 asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
915
916 return 0;
917}
918
919static int ax88178_reset(struct usbnet *dev)
920{
921 struct asix_data *data = (struct asix_data *)&dev->data;
922 int ret;
923 __le16 eeprom;
924 u8 status;
925 int gpio0 = 0;
926 u32 phyid;
927
928 asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
929 netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
930
931 asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
932 asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
933 asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
934
935 netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
936
937 if (eeprom == cpu_to_le16(0xffff)) {
938 data->phymode = PHY_MODE_MARVELL;
939 data->ledmode = 0;
940 gpio0 = 1;
941 } else {
942 data->phymode = le16_to_cpu(eeprom) & 0x7F;
943 data->ledmode = le16_to_cpu(eeprom) >> 8;
944 gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
945 }
946 netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
947
948 /* Power up external GigaPHY through AX88178 GPIO pin */
949 asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
950 AX_GPIO_GPO1EN, 40, 0);
951 if ((le16_to_cpu(eeprom) >> 8) != 1) {
952 asix_write_gpio(dev, 0x003c, 30, 0);
953 asix_write_gpio(dev, 0x001c, 300, 0);
954 asix_write_gpio(dev, 0x003c, 30, 0);
955 } else {
956 netdev_dbg(dev->net, "gpio phymode == 1 path\n");
957 asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
958 asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
959 }
960
961 /* Read PHYID register *AFTER* powering up PHY */
962 phyid = asix_get_phyid(dev);
963 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
964
965 /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
966 asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
967
968 asix_sw_reset(dev, 0, 0);
969 msleep(150);
970
971 asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
972 msleep(150);
973
974 asix_write_rx_ctl(dev, 0, 0);
975
976 if (data->phymode == PHY_MODE_MARVELL) {
977 marvell_phy_init(dev);
978 msleep(60);
979 } else if (data->phymode == PHY_MODE_RTL8211CL)
980 rtl8211cl_phy_init(dev);
981
982 asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
983 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
984 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
985 asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
986 ADVERTISE_1000FULL);
987
988 asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
989 mii_nway_restart(&dev->mii);
990
991 /* Rewrite MAC address */
992 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
993 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
994 data->mac_addr, 0);
995 if (ret < 0)
996 return ret;
997
998 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
999 if (ret < 0)
1000 return ret;
1001
1002 return 0;
1003}
1004
1005static int ax88178_link_reset(struct usbnet *dev)
1006{
1007 u16 mode;
1008 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
1009 struct asix_data *data = (struct asix_data *)&dev->data;
1010 u32 speed;
1011
1012 netdev_dbg(dev->net, "ax88178_link_reset()\n");
1013
1014 mii_check_media(&dev->mii, 1, 1);
1015 mii_ethtool_gset(&dev->mii, &ecmd);
1016 mode = AX88178_MEDIUM_DEFAULT;
1017 speed = ethtool_cmd_speed(&ecmd);
1018
1019 if (speed == SPEED_1000)
1020 mode |= AX_MEDIUM_GM;
1021 else if (speed == SPEED_100)
1022 mode |= AX_MEDIUM_PS;
1023 else
1024 mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
1025
1026 mode |= AX_MEDIUM_ENCK;
1027
1028 if (ecmd.duplex == DUPLEX_FULL)
1029 mode |= AX_MEDIUM_FD;
1030 else
1031 mode &= ~AX_MEDIUM_FD;
1032
1033 netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
1034 speed, ecmd.duplex, mode);
1035
1036 asix_write_medium_mode(dev, mode, 0);
1037
1038 if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
1039 marvell_led_status(dev, speed);
1040
1041 return 0;
1042}
1043
1044static void ax88178_set_mfb(struct usbnet *dev)
1045{
1046 u16 mfb = AX_RX_CTL_MFB_16384;
1047 u16 rxctl;
1048 u16 medium;
1049 int old_rx_urb_size = dev->rx_urb_size;
1050
1051 if (dev->hard_mtu < 2048) {
1052 dev->rx_urb_size = 2048;
1053 mfb = AX_RX_CTL_MFB_2048;
1054 } else if (dev->hard_mtu < 4096) {
1055 dev->rx_urb_size = 4096;
1056 mfb = AX_RX_CTL_MFB_4096;
1057 } else if (dev->hard_mtu < 8192) {
1058 dev->rx_urb_size = 8192;
1059 mfb = AX_RX_CTL_MFB_8192;
1060 } else if (dev->hard_mtu < 16384) {
1061 dev->rx_urb_size = 16384;
1062 mfb = AX_RX_CTL_MFB_16384;
1063 }
1064
1065 rxctl = asix_read_rx_ctl(dev, 0);
1066 asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
1067
1068 medium = asix_read_medium_status(dev, 0);
1069 if (dev->net->mtu > 1500)
1070 medium |= AX_MEDIUM_JFE;
1071 else
1072 medium &= ~AX_MEDIUM_JFE;
1073 asix_write_medium_mode(dev, medium, 0);
1074
1075 if (dev->rx_urb_size > old_rx_urb_size)
1076 usbnet_unlink_rx_urbs(dev);
1077}
1078
1079static int ax88178_change_mtu(struct net_device *net, int new_mtu)
1080{
1081 struct usbnet *dev = netdev_priv(net);
1082 int ll_mtu = new_mtu + net->hard_header_len + 4;
1083
1084 netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
1085
1086 if ((ll_mtu % dev->maxpacket) == 0)
1087 return -EDOM;
1088
1089 net->mtu = new_mtu;
1090 dev->hard_mtu = net->mtu + net->hard_header_len;
1091 ax88178_set_mfb(dev);
1092
1093 /* max qlen depend on hard_mtu and rx_urb_size */
1094 usbnet_update_max_qlen(dev);
1095
1096 return 0;
1097}
1098
1099static const struct net_device_ops ax88178_netdev_ops = {
1100 .ndo_open = usbnet_open,
1101 .ndo_stop = usbnet_stop,
1102 .ndo_start_xmit = usbnet_start_xmit,
1103 .ndo_tx_timeout = usbnet_tx_timeout,
1104 .ndo_get_stats64 = dev_get_tstats64,
1105 .ndo_set_mac_address = asix_set_mac_address,
1106 .ndo_validate_addr = eth_validate_addr,
1107 .ndo_set_rx_mode = asix_set_multicast,
1108 .ndo_do_ioctl = asix_ioctl,
1109 .ndo_change_mtu = ax88178_change_mtu,
1110};
1111
1112static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
1113{
1114 int ret;
1115 u8 buf[ETH_ALEN] = {0};
1116
1117 usbnet_get_endpoints(dev,intf);
1118
1119 /* Get the MAC address */
1120 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
1121 if (ret < 0) {
1122 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
1123 return ret;
1124 }
1125
1126 asix_set_netdev_dev_addr(dev, buf);
1127
1128 /* Initialize MII structure */
1129 dev->mii.dev = dev->net;
1130 dev->mii.mdio_read = asix_mdio_read;
1131 dev->mii.mdio_write = asix_mdio_write;
1132 dev->mii.phy_id_mask = 0x1f;
1133 dev->mii.reg_num_mask = 0xff;
1134 dev->mii.supports_gmii = 1;
1135
1136 dev->mii.phy_id = asix_read_phy_addr(dev, true);
1137 if (dev->mii.phy_id < 0)
1138 return dev->mii.phy_id;
1139
1140 dev->net->netdev_ops = &ax88178_netdev_ops;
1141 dev->net->ethtool_ops = &ax88178_ethtool_ops;
1142 dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
1143
1144 /* Blink LEDS so users know driver saw dongle */
1145 asix_sw_reset(dev, 0, 0);
1146 msleep(150);
1147
1148 asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
1149 msleep(150);
1150
1151 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
1152 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
1153 /* hard_mtu is still the default - the device does not support
1154 jumbo eth frames */
1155 dev->rx_urb_size = 2048;
1156 }
1157
1158 dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
1159 if (!dev->driver_priv)
1160 return -ENOMEM;
1161
1162 return 0;
1163}
1164
1165static const struct driver_info ax8817x_info = {
1166 .description = "ASIX AX8817x USB 2.0 Ethernet",
1167 .bind = ax88172_bind,
1168 .status = asix_status,
1169 .link_reset = ax88172_link_reset,
1170 .reset = ax88172_link_reset,
1171 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1172 .data = 0x00130103,
1173};
1174
1175static const struct driver_info dlink_dub_e100_info = {
1176 .description = "DLink DUB-E100 USB Ethernet",
1177 .bind = ax88172_bind,
1178 .status = asix_status,
1179 .link_reset = ax88172_link_reset,
1180 .reset = ax88172_link_reset,
1181 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1182 .data = 0x009f9d9f,
1183};
1184
1185static const struct driver_info netgear_fa120_info = {
1186 .description = "Netgear FA-120 USB Ethernet",
1187 .bind = ax88172_bind,
1188 .status = asix_status,
1189 .link_reset = ax88172_link_reset,
1190 .reset = ax88172_link_reset,
1191 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1192 .data = 0x00130103,
1193};
1194
1195static const struct driver_info hawking_uf200_info = {
1196 .description = "Hawking UF200 USB Ethernet",
1197 .bind = ax88172_bind,
1198 .status = asix_status,
1199 .link_reset = ax88172_link_reset,
1200 .reset = ax88172_link_reset,
1201 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1202 .data = 0x001f1d1f,
1203};
1204
1205static const struct driver_info ax88772_info = {
1206 .description = "ASIX AX88772 USB 2.0 Ethernet",
1207 .bind = ax88772_bind,
1208 .unbind = ax88772_unbind,
1209 .status = asix_status,
1210 .reset = ax88772_reset,
1211 .stop = ax88772_stop,
1212 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
1213 .rx_fixup = asix_rx_fixup_common,
1214 .tx_fixup = asix_tx_fixup,
1215};
1216
1217static const struct driver_info ax88772b_info = {
1218 .description = "ASIX AX88772B USB 2.0 Ethernet",
1219 .bind = ax88772_bind,
1220 .unbind = ax88772_unbind,
1221 .status = asix_status,
1222 .reset = ax88772_reset,
1223 .stop = ax88772_stop,
1224 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1225 FLAG_MULTI_PACKET,
1226 .rx_fixup = asix_rx_fixup_common,
1227 .tx_fixup = asix_tx_fixup,
1228 .data = FLAG_EEPROM_MAC,
1229};
1230
1231static const struct driver_info ax88178_info = {
1232 .description = "ASIX AX88178 USB 2.0 Ethernet",
1233 .bind = ax88178_bind,
1234 .unbind = ax88178_unbind,
1235 .status = asix_status,
1236 .link_reset = ax88178_link_reset,
1237 .reset = ax88178_reset,
1238 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1239 FLAG_MULTI_PACKET,
1240 .rx_fixup = asix_rx_fixup_common,
1241 .tx_fixup = asix_tx_fixup,
1242};
1243
1244/*
1245 * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
1246 * no-name packaging.
1247 * USB device strings are:
1248 * 1: Manufacturer: USBLINK
1249 * 2: Product: HG20F9 USB2.0
1250 * 3: Serial: 000003
1251 * Appears to be compatible with Asix 88772B.
1252 */
1253static const struct driver_info hg20f9_info = {
1254 .description = "HG20F9 USB 2.0 Ethernet",
1255 .bind = ax88772_bind,
1256 .unbind = ax88772_unbind,
1257 .status = asix_status,
1258 .reset = ax88772_reset,
1259 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1260 FLAG_MULTI_PACKET,
1261 .rx_fixup = asix_rx_fixup_common,
1262 .tx_fixup = asix_tx_fixup,
1263 .data = FLAG_EEPROM_MAC,
1264};
1265
1266static const struct usb_device_id products [] = {
1267{
1268 // Linksys USB200M
1269 USB_DEVICE (0x077b, 0x2226),
1270 .driver_info = (unsigned long) &ax8817x_info,
1271}, {
1272 // Netgear FA120
1273 USB_DEVICE (0x0846, 0x1040),
1274 .driver_info = (unsigned long) &netgear_fa120_info,
1275}, {
1276 // DLink DUB-E100
1277 USB_DEVICE (0x2001, 0x1a00),
1278 .driver_info = (unsigned long) &dlink_dub_e100_info,
1279}, {
1280 // Intellinet, ST Lab USB Ethernet
1281 USB_DEVICE (0x0b95, 0x1720),
1282 .driver_info = (unsigned long) &ax8817x_info,
1283}, {
1284 // Hawking UF200, TrendNet TU2-ET100
1285 USB_DEVICE (0x07b8, 0x420a),
1286 .driver_info = (unsigned long) &hawking_uf200_info,
1287}, {
1288 // Billionton Systems, USB2AR
1289 USB_DEVICE (0x08dd, 0x90ff),
1290 .driver_info = (unsigned long) &ax8817x_info,
1291}, {
1292 // Billionton Systems, GUSB2AM-1G-B
1293 USB_DEVICE(0x08dd, 0x0114),
1294 .driver_info = (unsigned long) &ax88178_info,
1295}, {
1296 // ATEN UC210T
1297 USB_DEVICE (0x0557, 0x2009),
1298 .driver_info = (unsigned long) &ax8817x_info,
1299}, {
1300 // Buffalo LUA-U2-KTX
1301 USB_DEVICE (0x0411, 0x003d),
1302 .driver_info = (unsigned long) &ax8817x_info,
1303}, {
1304 // Buffalo LUA-U2-GT 10/100/1000
1305 USB_DEVICE (0x0411, 0x006e),
1306 .driver_info = (unsigned long) &ax88178_info,
1307}, {
1308 // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
1309 USB_DEVICE (0x6189, 0x182d),
1310 .driver_info = (unsigned long) &ax8817x_info,
1311}, {
1312 // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
1313 USB_DEVICE (0x0df6, 0x0056),
1314 .driver_info = (unsigned long) &ax88178_info,
1315}, {
1316 // Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
1317 USB_DEVICE (0x0df6, 0x061c),
1318 .driver_info = (unsigned long) &ax88178_info,
1319}, {
1320 // corega FEther USB2-TX
1321 USB_DEVICE (0x07aa, 0x0017),
1322 .driver_info = (unsigned long) &ax8817x_info,
1323}, {
1324 // Surecom EP-1427X-2
1325 USB_DEVICE (0x1189, 0x0893),
1326 .driver_info = (unsigned long) &ax8817x_info,
1327}, {
1328 // goodway corp usb gwusb2e
1329 USB_DEVICE (0x1631, 0x6200),
1330 .driver_info = (unsigned long) &ax8817x_info,
1331}, {
1332 // JVC MP-PRX1 Port Replicator
1333 USB_DEVICE (0x04f1, 0x3008),
1334 .driver_info = (unsigned long) &ax8817x_info,
1335}, {
1336 // Lenovo U2L100P 10/100
1337 USB_DEVICE (0x17ef, 0x7203),
1338 .driver_info = (unsigned long)&ax88772b_info,
1339}, {
1340 // ASIX AX88772B 10/100
1341 USB_DEVICE (0x0b95, 0x772b),
1342 .driver_info = (unsigned long) &ax88772b_info,
1343}, {
1344 // ASIX AX88772 10/100
1345 USB_DEVICE (0x0b95, 0x7720),
1346 .driver_info = (unsigned long) &ax88772_info,
1347}, {
1348 // ASIX AX88178 10/100/1000
1349 USB_DEVICE (0x0b95, 0x1780),
1350 .driver_info = (unsigned long) &ax88178_info,
1351}, {
1352 // Logitec LAN-GTJ/U2A
1353 USB_DEVICE (0x0789, 0x0160),
1354 .driver_info = (unsigned long) &ax88178_info,
1355}, {
1356 // Linksys USB200M Rev 2
1357 USB_DEVICE (0x13b1, 0x0018),
1358 .driver_info = (unsigned long) &ax88772_info,
1359}, {
1360 // 0Q0 cable ethernet
1361 USB_DEVICE (0x1557, 0x7720),
1362 .driver_info = (unsigned long) &ax88772_info,
1363}, {
1364 // DLink DUB-E100 H/W Ver B1
1365 USB_DEVICE (0x07d1, 0x3c05),
1366 .driver_info = (unsigned long) &ax88772_info,
1367}, {
1368 // DLink DUB-E100 H/W Ver B1 Alternate
1369 USB_DEVICE (0x2001, 0x3c05),
1370 .driver_info = (unsigned long) &ax88772_info,
1371}, {
1372 // DLink DUB-E100 H/W Ver C1
1373 USB_DEVICE (0x2001, 0x1a02),
1374 .driver_info = (unsigned long) &ax88772_info,
1375}, {
1376 // Linksys USB1000
1377 USB_DEVICE (0x1737, 0x0039),
1378 .driver_info = (unsigned long) &ax88178_info,
1379}, {
1380 // IO-DATA ETG-US2
1381 USB_DEVICE (0x04bb, 0x0930),
1382 .driver_info = (unsigned long) &ax88178_info,
1383}, {
1384 // Belkin F5D5055
1385 USB_DEVICE(0x050d, 0x5055),
1386 .driver_info = (unsigned long) &ax88178_info,
1387}, {
1388 // Apple USB Ethernet Adapter
1389 USB_DEVICE(0x05ac, 0x1402),
1390 .driver_info = (unsigned long) &ax88772_info,
1391}, {
1392 // Cables-to-Go USB Ethernet Adapter
1393 USB_DEVICE(0x0b95, 0x772a),
1394 .driver_info = (unsigned long) &ax88772_info,
1395}, {
1396 // ABOCOM for pci
1397 USB_DEVICE(0x14ea, 0xab11),
1398 .driver_info = (unsigned long) &ax88178_info,
1399}, {
1400 // ASIX 88772a
1401 USB_DEVICE(0x0db0, 0xa877),
1402 .driver_info = (unsigned long) &ax88772_info,
1403}, {
1404 // Asus USB Ethernet Adapter
1405 USB_DEVICE (0x0b95, 0x7e2b),
1406 .driver_info = (unsigned long)&ax88772b_info,
1407}, {
1408 /* ASIX 88172a demo board */
1409 USB_DEVICE(0x0b95, 0x172a),
1410 .driver_info = (unsigned long) &ax88172a_info,
1411}, {
1412 /*
1413 * USBLINK HG20F9 "USB 2.0 LAN"
1414 * Appears to have gazumped Linksys's manufacturer ID but
1415 * doesn't (yet) conflict with any known Linksys product.
1416 */
1417 USB_DEVICE(0x066b, 0x20f9),
1418 .driver_info = (unsigned long) &hg20f9_info,
1419},
1420 { }, // END
1421};
1422MODULE_DEVICE_TABLE(usb, products);
1423
1424static struct usb_driver asix_driver = {
1425 .name = DRIVER_NAME,
1426 .id_table = products,
1427 .probe = usbnet_probe,
1428 .suspend = asix_suspend,
1429 .resume = asix_resume,
1430 .reset_resume = asix_resume,
1431 .disconnect = usbnet_disconnect,
1432 .supports_autosuspend = 1,
1433 .disable_hub_initiated_lpm = 1,
1434};
1435
1436module_usb_driver(asix_driver);
1437
1438MODULE_AUTHOR("David Hollis");
1439MODULE_VERSION(DRIVER_VERSION);
1440MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
1441MODULE_LICENSE("GPL");
1442