Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * TI CPUFreq/OPP hw-supported driver
4 *
5 * Copyright (C) 2016-2017 Texas Instruments, Inc.
6 * Dave Gerlach <d-gerlach@ti.com>
7 */
8
9#include <linux/cpu.h>
10#include <linux/io.h>
11#include <linux/mfd/syscon.h>
12#include <linux/module.h>
13#include <linux/init.h>
14#include <linux/of.h>
15#include <linux/of_platform.h>
16#include <linux/pm_opp.h>
17#include <linux/regmap.h>
18#include <linux/slab.h>
19
20#define REVISION_MASK 0xF
21#define REVISION_SHIFT 28
22
23#define AM33XX_800M_ARM_MPU_MAX_FREQ 0x1E2F
24#define AM43XX_600M_ARM_MPU_MAX_FREQ 0xFFA
25
26#define DRA7_EFUSE_HAS_OD_MPU_OPP 11
27#define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15
28#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18
29#define DRA7_EFUSE_HAS_ALL_MPU_OPP 23
30#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24
31
32#define DRA7_EFUSE_NOM_MPU_OPP BIT(0)
33#define DRA7_EFUSE_OD_MPU_OPP BIT(1)
34#define DRA7_EFUSE_HIGH_MPU_OPP BIT(2)
35#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3)
36
37#define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C
38#define OMAP3_CONTROL_IDCODE 0x4830A204
39#define OMAP34xx_ProdID_SKUID 0x4830A20C
40#define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270)
41
42#define VERSION_COUNT 2
43
44struct ti_cpufreq_data;
45
46struct ti_cpufreq_soc_data {
47 const char * const *reg_names;
48 unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data,
49 unsigned long efuse);
50 unsigned long efuse_fallback;
51 unsigned long efuse_offset;
52 unsigned long efuse_mask;
53 unsigned long efuse_shift;
54 unsigned long rev_offset;
55 bool multi_regulator;
56};
57
58struct ti_cpufreq_data {
59 struct device *cpu_dev;
60 struct device_node *opp_node;
61 struct regmap *syscon;
62 const struct ti_cpufreq_soc_data *soc_data;
63 struct opp_table *opp_table;
64};
65
66static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
67 unsigned long efuse)
68{
69 if (!efuse)
70 efuse = opp_data->soc_data->efuse_fallback;
71 /* AM335x and AM437x use "OPP disable" bits, so invert */
72 return ~efuse;
73}
74
75static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
76 unsigned long efuse)
77{
78 unsigned long calculated_efuse = DRA7_EFUSE_NOM_MPU_OPP;
79
80 /*
81 * The efuse on dra7 and am57 parts contains a specific
82 * value indicating the highest available OPP.
83 */
84
85 switch (efuse) {
86 case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
87 case DRA76_EFUSE_HAS_ALL_MPU_OPP:
88 calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
89 fallthrough;
90 case DRA7_EFUSE_HAS_ALL_MPU_OPP:
91 case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
92 calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
93 fallthrough;
94 case DRA7_EFUSE_HAS_OD_MPU_OPP:
95 calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP;
96 }
97
98 return calculated_efuse;
99}
100
101static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data,
102 unsigned long efuse)
103{
104 /* OPP enable bit ("Speed Binned") */
105 return BIT(efuse);
106}
107
108static struct ti_cpufreq_soc_data am3x_soc_data = {
109 .efuse_xlate = amx3_efuse_xlate,
110 .efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ,
111 .efuse_offset = 0x07fc,
112 .efuse_mask = 0x1fff,
113 .rev_offset = 0x600,
114 .multi_regulator = false,
115};
116
117static struct ti_cpufreq_soc_data am4x_soc_data = {
118 .efuse_xlate = amx3_efuse_xlate,
119 .efuse_fallback = AM43XX_600M_ARM_MPU_MAX_FREQ,
120 .efuse_offset = 0x0610,
121 .efuse_mask = 0x3f,
122 .rev_offset = 0x600,
123 .multi_regulator = false,
124};
125
126static struct ti_cpufreq_soc_data dra7_soc_data = {
127 .efuse_xlate = dra7_efuse_xlate,
128 .efuse_offset = 0x020c,
129 .efuse_mask = 0xf80000,
130 .efuse_shift = 19,
131 .rev_offset = 0x204,
132 .multi_regulator = true,
133};
134
135/*
136 * OMAP35x TRM (SPRUF98K):
137 * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions.
138 * Control OMAP Status Register 15:0 (Address 0x4800 244C)
139 * to separate between omap3503, omap3515, omap3525, omap3530
140 * and feature presence.
141 * There are encodings for versions limited to 400/266MHz
142 * but we ignore.
143 * Not clear if this also holds for omap34xx.
144 * some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1
145 * are stored in the SYSCON register range
146 * Register 0x4830A20C [ProdID.SKUID] [0:3]
147 * 0x0 for normal 600/430MHz device.
148 * 0x8 for 720/520MHz device.
149 * Not clear what omap34xx value is.
150 */
151
152static struct ti_cpufreq_soc_data omap34xx_soc_data = {
153 .efuse_xlate = omap3_efuse_xlate,
154 .efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE,
155 .efuse_shift = 3,
156 .efuse_mask = BIT(3),
157 .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
158 .multi_regulator = false,
159};
160
161/*
162 * AM/DM37x TRM (SPRUGN4M)
163 * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions.
164 * Control Device Status Register 15:0 (Address 0x4800 244C)
165 * to separate between am3703, am3715, dm3725, dm3730
166 * and feature presence.
167 * Speed Binned = Bit 9
168 * 0 800/600 MHz
169 * 1 1000/800 MHz
170 * some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1
171 * are stored in the SYSCON register range.
172 * There is no 0x4830A20C [ProdID.SKUID] register (exists but
173 * seems to always read as 0).
174 */
175
176static const char * const omap3_reg_names[] = {"cpu0", "vbb"};
177
178static struct ti_cpufreq_soc_data omap36xx_soc_data = {
179 .reg_names = omap3_reg_names,
180 .efuse_xlate = omap3_efuse_xlate,
181 .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
182 .efuse_shift = 9,
183 .efuse_mask = BIT(9),
184 .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
185 .multi_regulator = true,
186};
187
188/*
189 * AM3517 is quite similar to AM/DM37x except that it has no
190 * high speed grade eFuse and no abb ldo
191 */
192
193static struct ti_cpufreq_soc_data am3517_soc_data = {
194 .efuse_xlate = omap3_efuse_xlate,
195 .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
196 .efuse_shift = 0,
197 .efuse_mask = 0,
198 .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE,
199 .multi_regulator = false,
200};
201
202
203/**
204 * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC
205 * @opp_data: pointer to ti_cpufreq_data context
206 * @efuse_value: Set to the value parsed from efuse
207 *
208 * Returns error code if efuse not read properly.
209 */
210static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data,
211 u32 *efuse_value)
212{
213 struct device *dev = opp_data->cpu_dev;
214 u32 efuse;
215 int ret;
216
217 ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset,
218 &efuse);
219 if (ret == -EIO) {
220 /* not a syscon register! */
221 void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +
222 opp_data->soc_data->efuse_offset, 4);
223
224 if (!regs)
225 return -ENOMEM;
226 efuse = readl(regs);
227 iounmap(regs);
228 }
229 else if (ret) {
230 dev_err(dev,
231 "Failed to read the efuse value from syscon: %d\n",
232 ret);
233 return ret;
234 }
235
236 efuse = (efuse & opp_data->soc_data->efuse_mask);
237 efuse >>= opp_data->soc_data->efuse_shift;
238
239 *efuse_value = opp_data->soc_data->efuse_xlate(opp_data, efuse);
240
241 return 0;
242}
243
244/**
245 * ti_cpufreq_get_rev() - Parse and return rev value present on SoC
246 * @opp_data: pointer to ti_cpufreq_data context
247 * @revision_value: Set to the value parsed from revision register
248 *
249 * Returns error code if revision not read properly.
250 */
251static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data,
252 u32 *revision_value)
253{
254 struct device *dev = opp_data->cpu_dev;
255 u32 revision;
256 int ret;
257
258 ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset,
259 &revision);
260 if (ret == -EIO) {
261 /* not a syscon register! */
262 void __iomem *regs = ioremap(OMAP3_SYSCON_BASE +
263 opp_data->soc_data->rev_offset, 4);
264
265 if (!regs)
266 return -ENOMEM;
267 revision = readl(regs);
268 iounmap(regs);
269 }
270 else if (ret) {
271 dev_err(dev,
272 "Failed to read the revision number from syscon: %d\n",
273 ret);
274 return ret;
275 }
276
277 *revision_value = BIT((revision >> REVISION_SHIFT) & REVISION_MASK);
278
279 return 0;
280}
281
282static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data)
283{
284 struct device *dev = opp_data->cpu_dev;
285 struct device_node *np = opp_data->opp_node;
286
287 opp_data->syscon = syscon_regmap_lookup_by_phandle(np,
288 "syscon");
289 if (IS_ERR(opp_data->syscon)) {
290 dev_err(dev,
291 "\"syscon\" is missing, cannot use OPPv2 table.\n");
292 return PTR_ERR(opp_data->syscon);
293 }
294
295 return 0;
296}
297
298static const struct of_device_id ti_cpufreq_of_match[] = {
299 { .compatible = "ti,am33xx", .data = &am3x_soc_data, },
300 { .compatible = "ti,am3517", .data = &am3517_soc_data, },
301 { .compatible = "ti,am43", .data = &am4x_soc_data, },
302 { .compatible = "ti,dra7", .data = &dra7_soc_data },
303 { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, },
304 { .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, },
305 /* legacy */
306 { .compatible = "ti,omap3430", .data = &omap34xx_soc_data, },
307 { .compatible = "ti,omap3630", .data = &omap36xx_soc_data, },
308 {},
309};
310
311static const struct of_device_id *ti_cpufreq_match_node(void)
312{
313 struct device_node *np;
314 const struct of_device_id *match;
315
316 np = of_find_node_by_path("/");
317 match = of_match_node(ti_cpufreq_of_match, np);
318 of_node_put(np);
319
320 return match;
321}
322
323static int ti_cpufreq_probe(struct platform_device *pdev)
324{
325 u32 version[VERSION_COUNT];
326 const struct of_device_id *match;
327 struct opp_table *ti_opp_table;
328 struct ti_cpufreq_data *opp_data;
329 const char * const default_reg_names[] = {"vdd", "vbb"};
330 int ret;
331
332 match = dev_get_platdata(&pdev->dev);
333 if (!match)
334 return -ENODEV;
335
336 opp_data = devm_kzalloc(&pdev->dev, sizeof(*opp_data), GFP_KERNEL);
337 if (!opp_data)
338 return -ENOMEM;
339
340 opp_data->soc_data = match->data;
341
342 opp_data->cpu_dev = get_cpu_device(0);
343 if (!opp_data->cpu_dev) {
344 pr_err("%s: Failed to get device for CPU0\n", __func__);
345 return -ENODEV;
346 }
347
348 opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev);
349 if (!opp_data->opp_node) {
350 dev_info(opp_data->cpu_dev,
351 "OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables.\n");
352 goto register_cpufreq_dt;
353 }
354
355 ret = ti_cpufreq_setup_syscon_register(opp_data);
356 if (ret)
357 goto fail_put_node;
358
359 /*
360 * OPPs determine whether or not they are supported based on
361 * two metrics:
362 * 0 - SoC Revision
363 * 1 - eFuse value
364 */
365 ret = ti_cpufreq_get_rev(opp_data, &version[0]);
366 if (ret)
367 goto fail_put_node;
368
369 ret = ti_cpufreq_get_efuse(opp_data, &version[1]);
370 if (ret)
371 goto fail_put_node;
372
373 ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
374 version, VERSION_COUNT);
375 if (IS_ERR(ti_opp_table)) {
376 dev_err(opp_data->cpu_dev,
377 "Failed to set supported hardware\n");
378 ret = PTR_ERR(ti_opp_table);
379 goto fail_put_node;
380 }
381
382 opp_data->opp_table = ti_opp_table;
383
384 if (opp_data->soc_data->multi_regulator) {
385 const char * const *reg_names = default_reg_names;
386
387 if (opp_data->soc_data->reg_names)
388 reg_names = opp_data->soc_data->reg_names;
389 ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
390 reg_names,
391 ARRAY_SIZE(default_reg_names));
392 if (IS_ERR(ti_opp_table)) {
393 dev_pm_opp_put_supported_hw(opp_data->opp_table);
394 ret = PTR_ERR(ti_opp_table);
395 goto fail_put_node;
396 }
397 }
398
399 of_node_put(opp_data->opp_node);
400register_cpufreq_dt:
401 platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
402
403 return 0;
404
405fail_put_node:
406 of_node_put(opp_data->opp_node);
407
408 return ret;
409}
410
411static int ti_cpufreq_init(void)
412{
413 const struct of_device_id *match;
414
415 /* Check to ensure we are on a compatible platform */
416 match = ti_cpufreq_match_node();
417 if (match)
418 platform_device_register_data(NULL, "ti-cpufreq", -1, match,
419 sizeof(*match));
420
421 return 0;
422}
423module_init(ti_cpufreq_init);
424
425static struct platform_driver ti_cpufreq_driver = {
426 .probe = ti_cpufreq_probe,
427 .driver = {
428 .name = "ti-cpufreq",
429 },
430};
431builtin_platform_driver(ti_cpufreq_driver);
432
433MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver");
434MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
435MODULE_LICENSE("GPL v2");