1#
   2# Watchdog device configuration
   3#
   4
   5menuconfig WATCHDOG
   6	bool "Watchdog Timer Support"
   7	---help---
   8	  If you say Y here (and to one of the following options) and create a
   9	  character special file /dev/watchdog with major number 10 and minor
  10	  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
  11	  subsequently opening the file and then failing to write to it for
  12	  longer than 1 minute will result in rebooting the machine. This
  13	  could be useful for a networked machine that needs to come back
  14	  on-line as fast as possible after a lock-up. There's both a watchdog
  15	  implementation entirely in software (which can sometimes fail to
  16	  reboot the machine) and a driver for hardware watchdog boards, which
  17	  are more robust and can also keep track of the temperature inside
  18	  your computer. For details, read
  19	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
  20
  21	  The watchdog is usually used together with the watchdog daemon
  22	  which is available from
  23	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
  24	  also monitor NFS connections and can reboot the machine when the process
  25	  table is full.
  26
  27	  If unsure, say N.
  28
  29if WATCHDOG
  30
  31config WATCHDOG_CORE
  32	bool "WatchDog Timer Driver Core"
  33	---help---
  34	  Say Y here if you want to use the new watchdog timer driver core.
  35	  This driver provides a framework for all watchdog timer drivers
  36	  and gives them the /dev/watchdog interface (and later also the
  37	  sysfs interface).
  38
  39config WATCHDOG_NOWAYOUT
  40	bool "Disable watchdog shutdown on close"
  41	help
  42	  The default watchdog behaviour (which you get if you say N here) is
  43	  to stop the timer if the process managing it closes the file
  44	  /dev/watchdog. It's always remotely possible that this process might
  45	  get killed. If you say Y here, the watchdog cannot be stopped once
  46	  it has been started.
  47
 
 
 
 
 
 
 
  48#
  49# General Watchdog drivers
  50#
  51
  52comment "Watchdog Device Drivers"
  53
  54# Architecture Independent
  55
  56config SOFT_WATCHDOG
  57	tristate "Software watchdog"
 
  58	help
  59	  A software monitoring watchdog. This will fail to reboot your system
  60	  from some situations that the hardware watchdog will recover
  61	  from. Equally it's a lot cheaper to install.
  62
  63	  To compile this driver as a module, choose M here: the
  64	  module will be called softdog.
  65
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  66config WM831X_WATCHDOG
  67	tristate "WM831x watchdog"
  68	depends on MFD_WM831X
 
  69	help
  70	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
  71	  the watchdog triggers the system will be reset.
  72
  73config WM8350_WATCHDOG
  74	tristate "WM8350 watchdog"
  75	depends on MFD_WM8350
 
  76	help
  77	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
  78	  the watchdog triggers the system will be reset.
  79
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  80# ALPHA Architecture
  81
  82# ARM Architecture
  83
  84config ARM_SP805_WATCHDOG
  85	tristate "ARM SP805 Watchdog"
  86	depends on ARM_AMBA
 
  87	help
  88	  ARM Primecell SP805 Watchdog timer. This will reboot your system when
  89	  the timeout is reached.
  90
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  91config AT91RM9200_WATCHDOG
  92	tristate "AT91RM9200 watchdog"
  93	depends on ARCH_AT91RM9200
  94	help
  95	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
  96	  system when the timeout is reached.
  97
  98config AT91SAM9X_WATCHDOG
  99	tristate "AT91SAM9X / AT91CAP9 watchdog"
 100	depends on ARCH_AT91 && !ARCH_AT91RM9200
 
 101	help
 102	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
 103	  reboot your system when the timeout is reached.
 104
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 105config 21285_WATCHDOG
 106	tristate "DC21285 watchdog"
 107	depends on FOOTBRIDGE
 108	help
 109	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
 110	  here if you wish to use this. Alternatively say M to compile the
 111	  driver as a module, which will be called wdt285.
 112
 113	  This driver does not work on all machines. In particular, early CATS
 114	  boards have hardware problems that will cause the machine to simply
 115	  lock up if the watchdog fires.
 116
 117	  "If in doubt, leave it out" - say N.
 118
 119config 977_WATCHDOG
 120	tristate "NetWinder WB83C977 watchdog"
 121	depends on FOOTBRIDGE && ARCH_NETWINDER
 122	help
 123	  Say Y here to include support for the WB977 watchdog included in
 124	  NetWinder machines. Alternatively say M to compile the driver as
 125	  a module, which will be called wdt977.
 126
 127	  Not sure? It's safe to say N.
 128
 129config IXP2000_WATCHDOG
 130	tristate "IXP2000 Watchdog"
 131	depends on ARCH_IXP2000
 132	help
 133	  Say Y here if to include support for the watchdog timer
 134	  in the Intel IXP2000(2400, 2800, 2850) network processors.
 135	  This driver can be built as a module by choosing M. The module
 136	  will be called ixp2000_wdt.
 137
 138	  Say N if you are unsure.
 139
 140config IXP4XX_WATCHDOG
 141	tristate "IXP4xx Watchdog"
 142	depends on ARCH_IXP4XX
 143	help
 144	  Say Y here if to include support for the watchdog timer
 145	  in the Intel IXP4xx network processors. This driver can
 146	  be built as a module by choosing M. The module will
 147	  be called ixp4xx_wdt.
 148
 149	  Note: The internal IXP4xx watchdog does a soft CPU reset
 150	  which doesn't reset any peripherals. There are circumstances
 151	  where the watchdog will fail to reset the board correctly
 152	  (e.g., if the boot ROM is in an unreadable state).
 153
 154	  Say N if you are unsure.
 155
 156config KS8695_WATCHDOG
 157	tristate "KS8695 watchdog"
 158	depends on ARCH_KS8695
 159	help
 160	  Watchdog timer embedded into KS8695 processor. This will reboot your
 161	  system when the timeout is reached.
 162
 163config HAVE_S3C2410_WATCHDOG
 164	bool
 165	help
 166	  This will include watchdog timer support for Samsung SoCs. If
 167	  you want to include watchdog support for any machine, kindly
 168	  select this in the respective mach-XXXX/Kconfig file.
 169
 170config S3C2410_WATCHDOG
 171	tristate "S3C2410 Watchdog"
 172	depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
 
 
 173	help
 174	  Watchdog timer block in the Samsung SoCs. This will reboot
 175	  the system when the timer expires with the watchdog enabled.
 176
 177	  The driver is limited by the speed of the system's PCLK
 178	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
 179	  then watchdog intervals of over approximately 20seconds are
 180	  unavailable.
 181
 182	  The driver can be built as a module by choosing M, and will
 183	  be called s3c2410_wdt
 184
 185config SA1100_WATCHDOG
 186	tristate "SA1100/PXA2xx watchdog"
 187	depends on ARCH_SA1100 || ARCH_PXA
 188	help
 189	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
 190	  reboot your system when timeout is reached.
 191
 192	  NOTE: once enabled, this timer cannot be disabled.
 193
 194	  To compile this driver as a module, choose M here: the
 195	  module will be called sa1100_wdt.
 196
 197config DW_WATCHDOG
 198	tristate "Synopsys DesignWare watchdog"
 199	depends on ARM && HAVE_CLK
 
 200	help
 201	  Say Y here if to include support for the Synopsys DesignWare
 202	  watchdog timer found in many ARM chips.
 203	  To compile this driver as a module, choose M here: the
 204	  module will be called dw_wdt.
 205
 206config MPCORE_WATCHDOG
 207	tristate "MPcore watchdog"
 208	depends on HAVE_ARM_TWD
 209	help
 210	  Watchdog timer embedded into the MPcore system.
 211
 212	  To compile this driver as a module, choose M here: the
 213	  module will be called mpcore_wdt.
 214
 215config EP93XX_WATCHDOG
 216	tristate "EP93xx Watchdog"
 217	depends on ARCH_EP93XX
 
 218	help
 219	  Say Y here if to include support for the watchdog timer
 220	  embedded in the Cirrus Logic EP93xx family of devices.
 221
 222	  To compile this driver as a module, choose M here: the
 223	  module will be called ep93xx_wdt.
 224
 225config OMAP_WATCHDOG
 226	tristate "OMAP Watchdog"
 227	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 
 228	help
 229	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
 230	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 231
 232config PNX4008_WATCHDOG
 233	tristate "PNX4008 and LPC32XX Watchdog"
 234	depends on ARCH_PNX4008 || ARCH_LPC32XX
 
 235	help
 236	  Say Y here if to include support for the watchdog timer
 237	  in the PNX4008 or LPC32XX processor.
 238	  This driver can be built as a module by choosing M. The module
 239	  will be called pnx4008_wdt.
 240
 241	  Say N if you are unsure.
 242
 243config IOP_WATCHDOG
 244	tristate "IOP Watchdog"
 245	depends on PLAT_IOP
 246	select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
 247	help
 248	  Say Y here if to include support for the watchdog timer
 249	  in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
 250	  be built as a module by choosing M. The module will
 251	  be called iop_wdt.
 252
 253	  Note: The IOP13XX watchdog does an Internal Bus Reset which will
 254	  affect both cores and the peripherals of the IOP.  The ATU-X
 255	  and/or ATUe configuration registers will remain intact, but if
 256	  operating as an Root Complex and/or Central Resource, the PCI-X
 257	  and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
 258
 259config DAVINCI_WATCHDOG
 260	tristate "DaVinci watchdog"
 261	depends on ARCH_DAVINCI
 
 262	help
 263	  Say Y here if to include support for the watchdog timer
 264	  in the DaVinci DM644x/DM646x processors.
 265	  To compile this driver as a module, choose M here: the
 266	  module will be called davinci_wdt.
 267
 268	  NOTE: once enabled, this timer cannot be disabled.
 269	  Say N if you are unsure.
 270
 271config ORION_WATCHDOG
 272	tristate "Orion watchdog"
 273	depends on ARCH_ORION5X || ARCH_KIRKWOOD
 
 
 274	help
 275	  Say Y here if to include support for the watchdog timer
 276	  in the Marvell Orion5x and Kirkwood ARM SoCs.
 277	  To compile this driver as a module, choose M here: the
 278	  module will be called orion_wdt.
 279
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 280config COH901327_WATCHDOG
 281	bool "ST-Ericsson COH 901 327 watchdog"
 282	depends on ARCH_U300
 283	default y if MACH_U300
 
 284	help
 285	  Say Y here to include Watchdog timer support for the
 286	  watchdog embedded into the ST-Ericsson U300 series platforms.
 287	  This watchdog is used to reset the system and thus cannot be
 288	  compiled as a module.
 289
 290config TWL4030_WATCHDOG
 291	tristate "TWL4030 Watchdog"
 292	depends on TWL4030_CORE
 
 293	help
 294	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
 295	  watchdog timer support for TWL4030 chips.
 296
 297config STMP3XXX_WATCHDOG
 298	tristate "Freescale STMP3XXX watchdog"
 299	depends on ARCH_STMP3XXX
 
 300	help
 301	  Say Y here if to include support for the watchdog timer
 302	  for the Sigmatel STMP37XX/378X SoC.
 303	  To compile this driver as a module, choose M here: the
 304	  module will be called stmp3xxx_wdt.
 305
 306config NUC900_WATCHDOG
 307	tristate "Nuvoton NUC900 watchdog"
 308	depends on ARCH_W90X900
 309	help
 310	  Say Y here if to include support for the watchdog timer
 311	  for the Nuvoton NUC900 series SoCs.
 312	  To compile this driver as a module, choose M here: the
 313	  module will be called nuc900_wdt.
 314
 315config ADX_WATCHDOG
 316	tristate "Avionic Design Xanthos watchdog"
 317	depends on ARCH_PXA_ADX
 318	help
 319	  Say Y here if you want support for the watchdog timer on Avionic
 320	  Design Xanthos boards.
 
 
 
 
 321
 322config TS72XX_WATCHDOG
 323	tristate "TS-72XX SBC Watchdog"
 324	depends on MACH_TS72XX
 325	help
 326	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
 327	  watchdog timer implemented in a external CPLD chip. Say Y here
 328	  if you want to support for the watchdog timer on TS-72XX boards.
 329
 330	  To compile this driver as a module, choose M here: the
 331	  module will be called ts72xx_wdt.
 332
 333config MAX63XX_WATCHDOG
 334	tristate "Max63xx watchdog"
 335	depends on ARM && HAS_IOMEM
 
 336	help
 337	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
 338
 339config IMX2_WDT
 340	tristate "IMX2+ Watchdog"
 341	depends on IMX_HAVE_PLATFORM_IMX2_WDT
 
 
 342	help
 343	  This is the driver for the hardware watchdog
 344	  on the Freescale IMX2 and later processors.
 345	  If you have one of these processors and wish to have
 346	  watchdog support enabled, say Y, otherwise say N.
 347
 348	  To compile this driver as a module, choose M here: the
 349	  module will be called imx2_wdt.
 350
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 351# AVR32 Architecture
 352
 353config AT32AP700X_WDT
 354	tristate "AT32AP700x watchdog"
 355	depends on CPU_AT32AP700X
 356	help
 357	  Watchdog timer embedded into AT32AP700x devices. This will reboot
 358	  your system when the timeout is reached.
 359
 360# BLACKFIN Architecture
 361
 362config BFIN_WDT
 363	tristate "Blackfin On-Chip Watchdog Timer"
 364	depends on BLACKFIN
 365	---help---
 366	  If you say yes here you will get support for the Blackfin On-Chip
 367	  Watchdog Timer. If you have one of these processors and wish to
 368	  have watchdog support enabled, say Y, otherwise say N.
 369
 370	  To compile this driver as a module, choose M here: the
 371	  module will be called bfin_wdt.
 372
 373# CRIS Architecture
 374
 375# FRV Architecture
 376
 377# H8300 Architecture
 378
 379# X86 (i386 + ia64 + x86_64) Architecture
 380
 381config ACQUIRE_WDT
 382	tristate "Acquire SBC Watchdog Timer"
 383	depends on X86
 384	---help---
 385	  This is the driver for the hardware watchdog on Single Board
 386	  Computers produced by Acquire Inc (and others). This watchdog
 387	  simply watches your kernel to make sure it doesn't freeze, and if
 388	  it does, it reboots your computer after a certain amount of time.
 389
 390	  To compile this driver as a module, choose M here: the
 391	  module will be called acquirewdt.
 392
 393	  Most people will say N.
 394
 395config ADVANTECH_WDT
 396	tristate "Advantech SBC Watchdog Timer"
 397	depends on X86
 398	help
 399	  If you are configuring a Linux kernel for the Advantech single-board
 400	  computer, say `Y' here to support its built-in watchdog timer
 401	  feature. More information can be found at
 402	  <http://www.advantech.com.tw/products/>
 403
 404config ALIM1535_WDT
 405	tristate "ALi M1535 PMU Watchdog Timer"
 406	depends on X86 && PCI
 407	---help---
 408	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
 409
 410	  To compile this driver as a module, choose M here: the
 411	  module will be called alim1535_wdt.
 412
 413	  Most people will say N.
 414
 415config ALIM7101_WDT
 416	tristate "ALi M7101 PMU Computer Watchdog"
 417	depends on PCI
 418	help
 419	  This is the driver for the hardware watchdog on the ALi M7101 PMU
 420	  as used in the x86 Cobalt servers and also found in some
 421	  SPARC Netra servers too.
 422
 423	  To compile this driver as a module, choose M here: the
 424	  module will be called alim7101_wdt.
 425
 426	  Most people will say N.
 427
 
 
 
 
 
 
 
 
 
 428config F71808E_WDT
 429	tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
 430	depends on X86 && EXPERIMENTAL
 431	help
 432	  This is the driver for the hardware watchdog on the Fintek
 433	  F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
 434
 435	  You can compile this driver directly into the kernel, or use
 436	  it as a module.  The module will be called f71808e_wdt.
 437
 438config SP5100_TCO
 439	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
 440	depends on X86 && PCI
 441	---help---
 442	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
 443	  (Total Cost of Ownership) timer is a watchdog timer that will reboot
 444	  the machine after its expiration. The expiration time can be
 445	  configured with the "heartbeat" parameter.
 446
 447	  To compile this driver as a module, choose M here: the
 448	  module will be called sp5100_tco.
 449
 450config GEODE_WDT
 451	tristate "AMD Geode CS5535/CS5536 Watchdog"
 452	depends on CS5535_MFGPT
 453	help
 454	  This driver enables a watchdog capability built into the
 455	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
 456	  processors.  This watchdog watches your kernel to make sure
 457	  it doesn't freeze, and if it does, it reboots your computer after
 458	  a certain amount of time.
 459
 460	  You can compile this driver directly into the kernel, or use
 461	  it as a module.  The module will be called geodewdt.
 462
 463config SC520_WDT
 464	tristate "AMD Elan SC520 processor Watchdog"
 465	depends on X86
 466	help
 467	  This is the driver for the hardware watchdog built in to the
 468	  AMD "Elan" SC520 microcomputer commonly used in embedded systems.
 469	  This watchdog simply watches your kernel to make sure it doesn't
 470	  freeze, and if it does, it reboots your computer after a certain
 471	  amount of time.
 472
 473	  You can compile this driver directly into the kernel, or use
 474	  it as a module.  The module will be called sc520_wdt.
 475
 476config SBC_FITPC2_WATCHDOG
 477	tristate "Compulab SBC-FITPC2 watchdog"
 478	depends on X86
 479	---help---
 480	  This is the driver for the built-in watchdog timer on the fit-PC2,
 481	  fit-PC2i, CM-iAM single-board computers made by Compulab.
 482
 483	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 484	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
 485
 486	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
 487	  so system will not be restarted while user in BIOS setup.
 488
 489	  Once watchdog was enabled the system will be restarted every
 490	  "Watchdog Timer Value" period, so to prevent it user can restart or
 491	  disable the watchdog.
 492
 493	  To compile this driver as a module, choose M here: the
 494	  module will be called sbc_fitpc2_wdt.
 495
 496	  Most people will say N.
 497
 498config EUROTECH_WDT
 499	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 500	depends on X86
 501	help
 502	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
 503	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
 504	  information are at <http://www.eurotech.it/>.
 505
 506config IB700_WDT
 507	tristate "IB700 SBC Watchdog Timer"
 508	depends on X86
 509	---help---
 510	  This is the driver for the hardware watchdog on the IB700 Single
 511	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
 512	  simply watches your kernel to make sure it doesn't freeze, and if
 513	  it does, it reboots your computer after a certain amount of time.
 514
 515	  This driver is like the WDT501 driver but for slightly different hardware.
 516
 517	  To compile this driver as a module, choose M here: the
 518	  module will be called ib700wdt.
 519
 520	  Most people will say N.
 521
 522config IBMASR
 523	tristate "IBM Automatic Server Restart"
 524	depends on X86
 525	help
 526	  This is the driver for the IBM Automatic Server Restart watchdog
 527	  timer built-in into some eServer xSeries machines.
 528
 529	  To compile this driver as a module, choose M here: the
 530	  module will be called ibmasr.
 531
 532config WAFER_WDT
 533	tristate "ICP Single Board Computer Watchdog Timer"
 534	depends on X86
 535	help
 536	  This is a driver for the hardware watchdog on the ICP Single
 537	  Board Computer. This driver is working on (at least) the following
 538	  IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
 539
 540	  To compile this driver as a module, choose M here: the
 541	  module will be called wafer5823wdt.
 542
 543config I6300ESB_WDT
 544	tristate "Intel 6300ESB Timer/Watchdog"
 545	depends on X86 && PCI
 546	---help---
 547	  Hardware driver for the watchdog timer built into the Intel
 548	  6300ESB controller hub.
 549
 550	  To compile this driver as a module, choose M here: the
 551	  module will be called i6300esb.
 552
 
 
 
 
 
 
 
 
 
 
 
 
 
 553config INTEL_SCU_WATCHDOG
 554	bool "Intel SCU Watchdog for Mobile Platforms"
 555	depends on X86_MRST
 556	---help---
 557	  Hardware driver for the watchdog time built into the Intel SCU
 558	  for Intel Mobile Platforms.
 559
 560	  To compile this driver as a module, choose M here.
 561
 
 
 
 
 
 
 
 
 
 
 
 
 
 562config ITCO_WDT
 563	tristate "Intel TCO Timer/Watchdog"
 564	depends on (X86 || IA64) && PCI
 
 
 
 
 565	---help---
 566	  Hardware driver for the intel TCO timer based watchdog devices.
 567	  These drivers are included in the Intel 82801 I/O Controller
 568	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 569	  controller hub.
 570
 571	  The TCO (Total Cost of Ownership) timer is a watchdog timer
 572	  that will reboot the machine after its second expiration. The
 573	  expiration time can be configured with the "heartbeat" parameter.
 574
 575	  On some motherboards the driver may fail to reset the chipset's
 576	  NO_REBOOT flag which prevents the watchdog from rebooting the
 577	  machine. If this is the case you will get a kernel message like
 578	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 579
 580	  To compile this driver as a module, choose M here: the
 581	  module will be called iTCO_wdt.
 582
 583config ITCO_VENDOR_SUPPORT
 584	bool "Intel TCO Timer/Watchdog Specific Vendor Support"
 585	depends on ITCO_WDT
 586	---help---
 587	  Add vendor specific support to the intel TCO timer based watchdog
 588	  devices. At this moment we only have additional support for some
 589	  SuperMicro Inc. motherboards.
 590
 591config IT8712F_WDT
 592	tristate "IT8712F (Smart Guardian) Watchdog Timer"
 593	depends on X86
 594	---help---
 595	  This is the driver for the built-in watchdog timer on the IT8712F
 596	  Super I/0 chipset used on many motherboards.
 597
 598	  If the driver does not work, then make sure that the game port in
 599	  the BIOS is enabled.
 600
 601	  To compile this driver as a module, choose M here: the
 602	  module will be called it8712f_wdt.
 603
 604config IT87_WDT
 605	tristate "IT87 Watchdog Timer"
 606	depends on X86 && EXPERIMENTAL
 607	---help---
 608	  This is the driver for the hardware watchdog on the ITE IT8702,
 609	  IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 Super I/O chips.
 
 
 
 
 
 610	  This watchdog simply watches your kernel to make sure it doesn't
 611	  freeze, and if it does, it reboots your computer after a certain
 612	  amount of time.
 613
 614	  To compile this driver as a module, choose M here: the module will
 615	  be called it87_wdt.
 616
 617config HP_WATCHDOG
 618	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
 619	depends on X86 && PCI
 620	help
 621	  A software monitoring watchdog and NMI sourcing driver. This driver
 622	  will detect lockups and provide a stack trace. This is a driver that
 623	  will only load on an HP ProLiant system with a minimum of iLO2 support.
 624	  To compile this driver as a module, choose M here: the module will be
 625	  called hpwdt.
 626
 
 
 
 
 
 
 
 
 
 
 
 627config HPWDT_NMI_DECODING
 628	bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
 629	depends on HP_WATCHDOG
 630	default y
 631	help
 632	  When an NMI occurs this feature will make the necessary BIOS calls to
 633	  log the cause of the NMI.
 634
 635config SC1200_WDT
 636	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
 637	depends on X86
 638	help
 639	  This is a driver for National Semiconductor PC87307/PC97307 hardware
 640	  watchdog cards as found on the SC1200. This watchdog is mainly used
 641	  for power management purposes and can be used to power down the device
 642	  during inactivity periods (includes interrupt activity monitoring).
 643
 644	  To compile this driver as a module, choose M here: the
 645	  module will be called sc1200wdt.
 646
 647	  Most people will say N.
 648
 649config SCx200_WDT
 650	tristate "National Semiconductor SCx200 Watchdog"
 651	depends on SCx200 && PCI
 652	help
 653	  Enable the built-in watchdog timer support on the National
 654	  Semiconductor SCx200 processors.
 655
 656	  If compiled as a module, it will be called scx200_wdt.
 657
 658config PC87413_WDT
 659	tristate "NS PC87413 watchdog"
 660	depends on X86
 661	---help---
 662	  This is the driver for the hardware watchdog on the PC87413 chipset
 663	  This watchdog simply watches your kernel to make sure it doesn't
 664	  freeze, and if it does, it reboots your computer after a certain
 665	  amount of time.
 666
 667	  To compile this driver as a module, choose M here: the
 668	  module will be called pc87413_wdt.
 669
 670	  Most people will say N.
 671
 672config NV_TCO
 673	tristate "nVidia TCO Timer/Watchdog"
 674	depends on X86 && PCI
 675	---help---
 676	  Hardware driver for the TCO timer built into the nVidia Hub family
 677	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
 678	  watchdog timer that will reboot the machine after its second
 679	  expiration. The expiration time can be configured with the
 680	  "heartbeat" parameter.
 681
 682	  On some motherboards the driver may fail to reset the chipset's
 683	  NO_REBOOT flag which prevents the watchdog from rebooting the
 684	  machine. If this is the case you will get a kernel message like
 685	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 686
 687	  To compile this driver as a module, choose M here: the
 688	  module will be called nv_tco.
 689
 690config RDC321X_WDT
 691	tristate "RDC R-321x SoC watchdog"
 692	depends on X86_RDC321X
 693	help
 694	  This is the driver for the built in hardware watchdog
 695	  in the RDC R-321x SoC.
 696
 697	  To compile this driver as a module, choose M here: the
 698	  module will be called rdc321x_wdt.
 699
 700config 60XX_WDT
 701	tristate "SBC-60XX Watchdog Timer"
 702	depends on X86
 703	help
 704	  This driver can be used with the watchdog timer found on some
 705	  single board computers, namely the 6010 PII based computer.
 706	  It may well work with other cards.  It reads port 0x443 to enable
 707	  and re-set the watchdog timer, and reads port 0x45 to disable
 708	  the watchdog.  If you have a card that behave in similar ways,
 709	  you can probably make this driver work with your card as well.
 710
 711	  You can compile this driver directly into the kernel, or use
 712	  it as a module.  The module will be called sbc60xxwdt.
 713
 714config SBC8360_WDT
 715	tristate "SBC8360 Watchdog Timer"
 716	depends on X86
 717	---help---
 718
 719	  This is the driver for the hardware watchdog on the SBC8360 Single
 720	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
 721
 722	  To compile this driver as a module, choose M here: the
 723	  module will be called sbc8360.
 724
 725	  Most people will say N.
 726
 727config SBC7240_WDT
 728	tristate "SBC Nano 7240 Watchdog Timer"
 729	depends on X86_32
 730	---help---
 731	  This is the driver for the hardware watchdog found on the IEI
 732	  single board computers EPIC Nano 7240 (and likely others). This
 733	  watchdog simply watches your kernel to make sure it doesn't freeze,
 734	  and if it does, it reboots your computer after a certain amount of
 735	  time.
 736
 737	  To compile this driver as a module, choose M here: the
 738	  module will be called sbc7240_wdt.
 739
 740config CPU5_WDT
 741	tristate "SMA CPU5 Watchdog"
 742	depends on X86
 743	---help---
 744	  TBD.
 745	  To compile this driver as a module, choose M here: the
 746	  module will be called cpu5wdt.
 747
 748config SMSC_SCH311X_WDT
 749	tristate "SMSC SCH311X Watchdog Timer"
 750	depends on X86
 751	---help---
 752	  This is the driver for the hardware watchdog timer on the
 753	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
 754	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
 755	  serial ports).
 756
 757	  To compile this driver as a module, choose M here: the
 758	  module will be called sch311x_wdt.
 759
 760config SMSC37B787_WDT
 761	tristate "Winbond SMsC37B787 Watchdog Timer"
 762	depends on X86
 763	---help---
 764	  This is the driver for the hardware watchdog component on the
 765	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
 766	  from Vision Systems and maybe others.
 767
 768	  This watchdog simply watches your kernel to make sure it doesn't
 769	  freeze, and if it does, it reboots your computer after a certain
 770	  amount of time.
 771
 772	  Usually a userspace daemon will notify the kernel WDT driver that
 773	  userspace is still alive, at regular intervals.
 774
 775	  To compile this driver as a module, choose M here: the
 776	  module will be called smsc37b787_wdt.
 777
 778	  Most people will say N.
 779
 780config W83627HF_WDT
 781	tristate "W83627HF/W83627DHG Watchdog Timer"
 782	depends on X86
 
 783	---help---
 784	  This is the driver for the hardware watchdog on the W83627HF chipset
 785	  as used in Advantech PC-9578 and Tyan S2721-533 motherboards
 786	  (and likely others). The driver also supports the W83627DHG chip.
 787	  This watchdog simply watches your kernel to make sure it doesn't
 788	  freeze, and if it does, it reboots your computer after a certain
 789	  amount of time.
 790
 791	  To compile this driver as a module, choose M here: the
 792	  module will be called w83627hf_wdt.
 793
 794	  Most people will say N.
 795
 796config W83697HF_WDT
 797	tristate "W83697HF/W83697HG Watchdog Timer"
 798	depends on X86
 
 799	---help---
 800	  This is the driver for the hardware watchdog on the W83697HF/HG
 801	  chipset as used in Dedibox/VIA motherboards (and likely others).
 802	  This watchdog simply watches your kernel to make sure it doesn't
 803	  freeze, and if it does, it reboots your computer after a certain
 804	  amount of time.
 
 
 
 
 
 
 
 
 
 805
 806	  To compile this driver as a module, choose M here: the
 807	  module will be called w83697hf_wdt.
 808
 809	  Most people will say N.
 810
 811config W83697UG_WDT
 812	tristate "W83697UG/W83697UF Watchdog Timer"
 813	depends on X86
 814	---help---
 815	  This is the driver for the hardware watchdog on the W83697UG/UF
 816	  chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
 817	  This watchdog simply watches your kernel to make sure it doesn't
 818	  freeze, and if it does, it reboots your computer after a certain
 819	  amount of time.
 820
 821	  To compile this driver as a module, choose M here: the
 822	  module will be called w83697ug_wdt.
 823
 824	  Most people will say N.
 825
 826config W83877F_WDT
 827	tristate "W83877F (EMACS) Watchdog Timer"
 828	depends on X86
 829	---help---
 830	  This is the driver for the hardware watchdog on the W83877F chipset
 831	  as used in EMACS PC-104 motherboards (and likely others).  This
 832	  watchdog simply watches your kernel to make sure it doesn't freeze,
 833	  and if it does, it reboots your computer after a certain amount of
 834	  time.
 835
 836	  To compile this driver as a module, choose M here: the
 837	  module will be called w83877f_wdt.
 838
 839	  Most people will say N.
 840
 841config W83977F_WDT
 842	tristate "W83977F (PCM-5335) Watchdog Timer"
 843	depends on X86
 844	---help---
 845	  This is the driver for the hardware watchdog on the W83977F I/O chip
 846	  as used in AAEON's PCM-5335 SBC (and likely others).  This
 847	  watchdog simply watches your kernel to make sure it doesn't freeze,
 848	  and if it does, it reboots your computer after a certain amount of
 849	  time.
 850
 851	  To compile this driver as a module, choose M here: the
 852	  module will be called w83977f_wdt.
 853
 854config MACHZ_WDT
 855	tristate "ZF MachZ Watchdog"
 856	depends on X86
 857	---help---
 858	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
 859	  N.  This is the driver for the watchdog timer built-in on that
 860	  processor using ZF-Logic interface.  This watchdog simply watches
 861	  your kernel to make sure it doesn't freeze, and if it does, it
 862	  reboots your computer after a certain amount of time.
 863
 864	  To compile this driver as a module, choose M here: the
 865	  module will be called machzwd.
 866
 867config SBC_EPX_C3_WATCHDOG
 868	tristate "Winsystems SBC EPX-C3 watchdog"
 869	depends on X86
 870	---help---
 871	  This is the driver for the built-in watchdog timer on the EPX-C3
 872	  Single-board computer made by Winsystems, Inc.
 873
 874	  *Note*: This hardware watchdog is not probeable and thus there
 875	  is no way to know if writing to its IO address will corrupt
 876	  your system or have any real effect.  The only way to be sure
 877	  that this driver does what you want is to make sure you
 878	  are running it on an EPX-C3 from Winsystems with the watchdog
 879	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
 880	  IO ports.  Basically, the assumption is made that if you compile
 881	  this driver into your kernel and/or load it as a module, that you
 882	  know what you are doing and that you are in fact running on an
 883	  EPX-C3 board!
 884
 885	  To compile this driver as a module, choose M here: the
 886	  module will be called sbc_epx_c3.
 887
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 888# M32R Architecture
 889
 890# M68K Architecture
 891
 892config M54xx_WATCHDOG
 893	tristate "MCF54xx watchdog support"
 894	depends on M548x
 895	help
 896	  To compile this driver as a module, choose M here: the
 897	  module will be called m54xx_wdt.
 898
 899# MicroBlaze Architecture
 900
 901config XILINX_WATCHDOG
 902	tristate "Xilinx Watchdog timer"
 903	depends on MICROBLAZE
 904	---help---
 905	  Watchdog driver for the xps_timebase_wdt ip core.
 906
 907	  IMPORTANT: The xps_timebase_wdt parent must have the property
 908	  "clock-frequency" at device tree.
 909
 910	  To compile this driver as a module, choose M here: the
 911	  module will be called of_xilinx_wdt.
 912
 913# MIPS Architecture
 914
 915config ATH79_WDT
 916	tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
 917	depends on ATH79
 918	help
 919	  Hardware driver for the built-in watchdog timer on the Atheros
 920	  AR71XX/AR724X/AR913X SoCs.
 921
 922config BCM47XX_WDT
 923	tristate "Broadcom BCM47xx Watchdog Timer"
 924	depends on BCM47XX
 
 925	help
 926	  Hardware driver for the Broadcom BCM47xx Watchog Timer.
 927
 928config RC32434_WDT
 929	tristate "IDT RC32434 SoC Watchdog Timer"
 930	depends on MIKROTIK_RB532
 931	help
 932	  Hardware driver for the IDT RC32434 SoC built-in
 933	  watchdog timer.
 934
 935	  To compile this driver as a module, choose M here: the
 936	  module will be called rc32434_wdt.
 937
 938config INDYDOG
 939	tristate "Indy/I2 Hardware Watchdog"
 940	depends on SGI_HAS_INDYDOG
 941	help
 942	  Hardware driver for the Indy's/I2's watchdog. This is a
 943	  watchdog timer that will reboot the machine after a 60 second
 944	  timer expired and no process has written to /dev/watchdog during
 945	  that time.
 946
 947config JZ4740_WDT
 948	tristate "Ingenic jz4740 SoC hardware watchdog"
 949	depends on MACH_JZ4740
 
 950	help
 951	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
 952
 953config WDT_MTX1
 954	tristate "MTX-1 Hardware Watchdog"
 955	depends on MIPS_MTX1
 956	help
 957	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
 958	  will reboot the machine after a 100 seconds timer expired.
 959
 960config PNX833X_WDT
 961	tristate "PNX833x Hardware Watchdog"
 962	depends on SOC_PNX8335
 963	help
 964	  Hardware driver for the PNX833x's watchdog. This is a
 965	  watchdog timer that will reboot the machine after a programmable
 966	  timer has expired and no process has written to /dev/watchdog during
 967	  that time.
 968
 969config SIBYTE_WDOG
 970	tristate "Sibyte SoC hardware watchdog"
 971	depends on CPU_SB1
 972	help
 973	  Watchdog driver for the built in watchdog hardware in Sibyte
 974	  SoC processors.  There are apparently two watchdog timers
 975	  on such processors; this driver supports only the first one,
 976	  because currently Linux only supports exporting one watchdog
 977	  to userspace.
 978
 979	  To compile this driver as a loadable module, choose M here.
 980	  The module will be called sb_wdog.
 981
 982config AR7_WDT
 983	tristate "TI AR7 Watchdog Timer"
 984	depends on AR7
 985	help
 986	  Hardware driver for the TI AR7 Watchdog Timer.
 987
 988config TXX9_WDT
 989	tristate "Toshiba TXx9 Watchdog Timer"
 990	depends on CPU_TX39XX || CPU_TX49XX
 
 991	help
 992	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
 993
 994config OCTEON_WDT
 995	tristate "Cavium OCTEON SOC family Watchdog Timer"
 996	depends on CPU_CAVIUM_OCTEON
 997	default y
 
 998	select EXPORT_UASM if OCTEON_WDT = m
 999	help
1000	  Hardware driver for OCTEON's on chip watchdog timer.
1001	  Enables the watchdog for all cores running Linux. It
1002	  installs a NMI handler and pokes the watchdog based on an
1003	  interrupt.  On first expiration of the watchdog, the
1004	  interrupt handler pokes it.  The second expiration causes an
1005	  NMI that prints a message. The third expiration causes a
1006	  global soft reset.
1007
1008	  When userspace has /dev/watchdog open, no poking is done
1009	  from the first interrupt, it is then only poked when the
1010	  device is written.
1011
1012config BCM63XX_WDT
1013	tristate "Broadcom BCM63xx hardware watchdog"
1014	depends on BCM63XX
1015	help
1016	  Watchdog driver for the built in watchdog hardware in Broadcom
1017	  BCM63xx SoC.
1018
1019	  To compile this driver as a loadable module, choose M here.
1020	  The module will be called bcm63xx_wdt.
1021
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1022config LANTIQ_WDT
1023	tristate "Lantiq SoC watchdog"
1024	depends on LANTIQ
1025	help
1026	  Hardware driver for the Lantiq SoC Watchdog Timer.
1027
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1028# PARISC Architecture
1029
1030# POWERPC Architecture
1031
1032config GEF_WDT
1033	tristate "GE Watchdog Timer"
1034	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
1035	---help---
1036	  Watchdog timer found in a number of GE single board computers.
1037
1038config MPC5200_WDT
1039	bool "MPC52xx Watchdog Timer"
1040	depends on PPC_MPC52xx
1041	help
1042	  Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
1043
1044config 8xxx_WDT
1045	tristate "MPC8xxx Platform Watchdog Timer"
1046	depends on PPC_8xx || PPC_83xx || PPC_86xx
 
1047	help
1048	  This driver is for a SoC level watchdog that exists on some
1049	  Freescale PowerPC processors. So far this driver supports:
1050	  - MPC8xx watchdogs
1051	  - MPC83xx watchdogs
1052	  - MPC86xx watchdogs
1053
1054	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
1055
1056config MV64X60_WDT
1057	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
1058	depends on MV64X60
1059
1060config PIKA_WDT
1061	tristate "PIKA FPGA Watchdog"
1062	depends on WARP
1063	default y
1064	help
1065	  This enables the watchdog in the PIKA FPGA. Currently used on
1066	  the Warp platform.
1067
1068config BOOKE_WDT
1069	tristate "PowerPC Book-E Watchdog Timer"
1070	depends on BOOKE || 4xx
 
1071	---help---
1072	  Watchdog driver for PowerPC Book-E chips, such as the Freescale
1073	  MPC85xx SOCs and the IBM PowerPC 440.
1074
1075	  Please see Documentation/watchdog/watchdog-api.txt for
1076	  more information.
1077
1078config BOOKE_WDT_DEFAULT_TIMEOUT
1079	int "PowerPC Book-E Watchdog Timer Default Timeout"
1080	depends on BOOKE_WDT
1081	default 38 if FSL_BOOKE
1082	range 0 63 if FSL_BOOKE
1083	default 3 if !FSL_BOOKE
1084	range 0 3 if !FSL_BOOKE
1085	help
1086	  Select the default watchdog timer period to be used by the PowerPC
1087	  Book-E watchdog driver.  A watchdog "event" occurs when the bit
1088	  position represented by this number transitions from zero to one.
1089
1090	  For Freescale Book-E processors, this is a number between 0 and 63.
1091	  For other Book-E processors, this is a number between 0 and 3.
1092
1093	  The value can be overidden by the wdt_period command-line parameter.
 
 
 
 
 
 
 
 
 
 
 
 
1094
1095# PPC64 Architecture
1096
1097config WATCHDOG_RTAS
1098	tristate "RTAS watchdog"
1099	depends on PPC_RTAS
1100	help
1101	  This driver adds watchdog support for the RTAS watchdog.
1102
1103	  To compile this driver as a module, choose M here. The module
1104	  will be called wdrtas.
1105
1106# S390 Architecture
1107
1108config ZVM_WATCHDOG
1109	tristate "z/VM Watchdog Timer"
1110	depends on S390
 
1111	help
1112	  IBM s/390 and zSeries machines running under z/VM 5.1 or later
1113	  provide a virtual watchdog timer to their guest that cause a
1114	  user define Control Program command to be executed after a
1115	  timeout.
 
 
1116
1117	  To compile this driver as a module, choose M here. The module
1118	  will be called vmwatchdog.
1119
1120# SUPERH (sh + sh64) Architecture
1121
1122config SH_WDT
1123	tristate "SuperH Watchdog"
1124	depends on SUPERH && (CPU_SH3 || CPU_SH4)
 
1125	help
1126	  This driver adds watchdog support for the integrated watchdog in the
1127	  SuperH processors. If you have one of these processors and wish
1128	  to have watchdog support enabled, say Y, otherwise say N.
1129
1130	  As a side note, saying Y here will automatically boost HZ to 1000
1131	  so that the timer has a chance to clear the overflow counter. On
1132	  slower systems (such as the SH-2 and SH-3) this will likely yield
1133	  some performance issues. As such, the WDT should be avoided here
1134	  unless it is absolutely necessary.
1135
1136	  To compile this driver as a module, choose M here: the
1137	  module will be called shwdt.
1138
1139# SPARC Architecture
1140
1141# SPARC64 Architecture
1142
1143config WATCHDOG_CP1XXX
1144	tristate "CP1XXX Hardware Watchdog support"
1145	depends on SPARC64 && PCI
1146	---help---
1147	  This is the driver for the hardware watchdog timers present on
1148	  Sun Microsystems CompactPCI models CP1400 and CP1500.
1149
1150	  To compile this driver as a module, choose M here: the
1151	  module will be called cpwatchdog.
1152
1153	  If you do not have a CompactPCI model CP1400 or CP1500, or
1154	  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
1155	  you should say N to this option.
1156
1157config WATCHDOG_RIO
1158	tristate "RIO Hardware Watchdog support"
1159	depends on SPARC64 && PCI
1160	help
1161	  Say Y here to support the hardware watchdog capability on Sun RIO
1162	  machines.  The watchdog timeout period is normally one minute but
1163	  can be changed with a boot-time parameter.
1164
 
 
 
 
 
 
 
 
 
 
 
1165# XTENSA Architecture
1166
1167# Xen Architecture
1168
1169config XEN_WDT
1170	tristate "Xen Watchdog support"
1171	depends on XEN
1172	help
1173	  Say Y here to support the hypervisor watchdog capability provided
1174	  by Xen 4.0 and newer.  The watchdog timeout period is normally one
1175	  minute but can be changed with a boot-time parameter.
 
 
 
 
1176
1177#
1178# ISA-based Watchdog Cards
1179#
1180
1181comment "ISA-based Watchdog Cards"
1182	depends on ISA
1183
1184config PCWATCHDOG
1185	tristate "Berkshire Products ISA-PC Watchdog"
1186	depends on ISA
1187	---help---
1188	  This is the driver for the Berkshire Products ISA-PC Watchdog card.
1189	  This card simply watches your kernel to make sure it doesn't freeze,
1190	  and if it does, it reboots your computer after a certain amount of
1191	  time. This driver is like the WDT501 driver but for different
1192	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
1193	  watchdog cards can be ordered from <http://www.berkprod.com/>.
1194
1195	  To compile this driver as a module, choose M here: the
1196	  module will be called pcwd.
1197
1198	  Most people will say N.
1199
1200config MIXCOMWD
1201	tristate "Mixcom Watchdog"
1202	depends on ISA
1203	---help---
1204	  This is a driver for the Mixcom hardware watchdog cards.  This
1205	  watchdog simply watches your kernel to make sure it doesn't freeze,
1206	  and if it does, it reboots your computer after a certain amount of
1207	  time.
1208
1209	  To compile this driver as a module, choose M here: the
1210	  module will be called mixcomwd.
1211
1212	  Most people will say N.
1213
1214config WDT
1215	tristate "WDT Watchdog timer"
1216	depends on ISA
1217	---help---
1218	  If you have a WDT500P or WDT501P watchdog board, say Y here,
1219	  otherwise N. It is not possible to probe for this board, which means
1220	  that you have to inform the kernel about the IO port and IRQ that
1221	  is needed (you can do this via the io and irq parameters)
1222
1223	  To compile this driver as a module, choose M here: the
1224	  module will be called wdt.
1225
1226#
1227# PCI-based Watchdog Cards
1228#
1229
1230comment "PCI-based Watchdog Cards"
1231	depends on PCI
1232
1233config PCIPCWATCHDOG
1234	tristate "Berkshire Products PCI-PC Watchdog"
1235	depends on PCI
1236	---help---
1237	  This is the driver for the Berkshire Products PCI-PC Watchdog card.
1238	  This card simply watches your kernel to make sure it doesn't freeze,
1239	  and if it does, it reboots your computer after a certain amount of
1240	  time. The card can also monitor the internal temperature of the PC.
1241	  More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
1242
1243	  To compile this driver as a module, choose M here: the
1244	  module will be called pcwd_pci.
1245
1246	  Most people will say N.
1247
1248config WDTPCI
1249	tristate "PCI-WDT500/501 Watchdog timer"
1250	depends on PCI
1251	---help---
1252	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
1253
1254	  If you have a PCI-WDT501 watchdog board then you can enable the
1255	  temperature sensor by setting the type parameter to 501.
1256
1257	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
1258	  can do this via the tachometer parameter. Only do this if you have a
1259	  fan tachometer actually set up.
1260
1261	  To compile this driver as a module, choose M here: the
1262	  module will be called wdt_pci.
1263
1264#
1265# USB-based Watchdog Cards
1266#
1267
1268comment "USB-based Watchdog Cards"
1269	depends on USB
1270
1271config USBPCWATCHDOG
1272	tristate "Berkshire Products USB-PC Watchdog"
1273	depends on USB
1274	---help---
1275	  This is the driver for the Berkshire Products USB-PC Watchdog card.
1276	  This card simply watches your kernel to make sure it doesn't freeze,
1277	  and if it does, it reboots your computer after a certain amount of
1278	  time. The card can also monitor the internal temperature of the PC.
1279	  More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
1280
1281	  To compile this driver as a module, choose M here: the
1282	  module will be called pcwd_usb.
1283
1284	  Most people will say N.
1285
1286endif # WATCHDOG

   1
   2#
   3# Watchdog device configuration
   4#
   5
   6menuconfig WATCHDOG
   7	bool "Watchdog Timer Support"
   8	---help---
   9	  If you say Y here (and to one of the following options) and create a
  10	  character special file /dev/watchdog with major number 10 and minor
  11	  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
  12	  subsequently opening the file and then failing to write to it for
  13	  longer than 1 minute will result in rebooting the machine. This
  14	  could be useful for a networked machine that needs to come back
  15	  on-line as fast as possible after a lock-up. There's both a watchdog
  16	  implementation entirely in software (which can sometimes fail to
  17	  reboot the machine) and a driver for hardware watchdog boards, which
  18	  are more robust and can also keep track of the temperature inside
  19	  your computer. For details, read
  20	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
  21
  22	  The watchdog is usually used together with the watchdog daemon
  23	  which is available from
  24	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
  25	  also monitor NFS connections and can reboot the machine when the process
  26	  table is full.
  27
  28	  If unsure, say N.
  29
  30if WATCHDOG
  31
  32config WATCHDOG_CORE
  33	bool "WatchDog Timer Driver Core"
  34	---help---
  35	  Say Y here if you want to use the new watchdog timer driver core.
  36	  This driver provides a framework for all watchdog timer drivers
  37	  and gives them the /dev/watchdog interface (and later also the
  38	  sysfs interface).
  39
  40config WATCHDOG_NOWAYOUT
  41	bool "Disable watchdog shutdown on close"
  42	help
  43	  The default watchdog behaviour (which you get if you say N here) is
  44	  to stop the timer if the process managing it closes the file
  45	  /dev/watchdog. It's always remotely possible that this process might
  46	  get killed. If you say Y here, the watchdog cannot be stopped once
  47	  it has been started.
  48
  49config WATCHDOG_SYSFS
  50	bool "Read different watchdog information through sysfs"
  51	default n
  52	help
  53	  Say Y here if you want to enable watchdog device status read through
  54	  sysfs attributes.
  55
  56#
  57# General Watchdog drivers
  58#
  59
  60comment "Watchdog Device Drivers"
  61
  62# Architecture Independent
  63
  64config SOFT_WATCHDOG
  65	tristate "Software watchdog"
  66	select WATCHDOG_CORE
  67	help
  68	  A software monitoring watchdog. This will fail to reboot your system
  69	  from some situations that the hardware watchdog will recover
  70	  from. Equally it's a lot cheaper to install.
  71
  72	  To compile this driver as a module, choose M here: the
  73	  module will be called softdog.
  74
  75config DA9052_WATCHDOG
  76        tristate "Dialog DA9052 Watchdog"
  77        depends on PMIC_DA9052
  78        select WATCHDOG_CORE
  79        help
  80          Support for the watchdog in the DA9052 PMIC. Watchdog trigger
  81          cause system reset.
  82
  83          Say Y here to include support for the DA9052 watchdog.
  84          Alternatively say M to compile the driver as a module,
  85          which will be called da9052_wdt.
  86
  87config DA9055_WATCHDOG
  88	tristate "Dialog Semiconductor DA9055 Watchdog"
  89	depends on MFD_DA9055
  90	select WATCHDOG_CORE
  91	help
  92	  If you say yes here you get support for watchdog on the Dialog
  93	  Semiconductor DA9055 PMIC.
  94
  95	  This driver can also be built as a module.  If so, the module
  96	  will be called da9055_wdt.
  97
  98config DA9063_WATCHDOG
  99	tristate "Dialog DA9063 Watchdog"
 100	depends on MFD_DA9063
 101	select WATCHDOG_CORE
 102	help
 103	  Support for the watchdog in the DA9063 PMIC.
 104
 105	  This driver can be built as a module. The module name is da9063_wdt.
 106
 107config DA9062_WATCHDOG
 108	tristate "Dialog DA9062 Watchdog"
 109	depends on MFD_DA9062
 110	select WATCHDOG_CORE
 111	help
 112	  Support for the watchdog in the DA9062 PMIC.
 113
 114	  This driver can be built as a module. The module name is da9062_wdt.
 115
 116config GPIO_WATCHDOG
 117	tristate "Watchdog device controlled through GPIO-line"
 118	depends on OF_GPIO
 119	select WATCHDOG_CORE
 120	help
 121	  If you say yes here you get support for watchdog device
 122	  controlled through GPIO-line.
 123
 124config GPIO_WATCHDOG_ARCH_INITCALL
 125	bool "Register the watchdog as early as possible"
 126	depends on GPIO_WATCHDOG=y
 127	help
 128	  In some situations, the default initcall level (module_init)
 129	  in not early enough in the boot process to avoid the watchdog
 130	  to be triggered.
 131	  If you say yes here, the initcall level would be raised to
 132	  arch_initcall.
 133	  If in doubt, say N.
 134
 135config MENF21BMC_WATCHDOG
 136	tristate "MEN 14F021P00 BMC Watchdog"
 137	depends on MFD_MENF21BMC
 138	select WATCHDOG_CORE
 139	help
 140	  Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
 141
 142	  This driver can also be built as a module. If so the module
 143	  will be called menf21bmc_wdt.
 144
 145config TANGOX_WATCHDOG
 146	tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
 147	select WATCHDOG_CORE
 148	depends on ARCH_TANGO || COMPILE_TEST
 149	depends on HAS_IOMEM
 150	help
 151	  Support for the watchdog in Sigma Designs SMP86xx (tango3)
 152	  and SMP87xx (tango4) family chips.
 153
 154	  This driver can be built as a module. The module name is tangox_wdt.
 155
 156config WM831X_WATCHDOG
 157	tristate "WM831x watchdog"
 158	depends on MFD_WM831X
 159	select WATCHDOG_CORE
 160	help
 161	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
 162	  the watchdog triggers the system will be reset.
 163
 164config WM8350_WATCHDOG
 165	tristate "WM8350 watchdog"
 166	depends on MFD_WM8350
 167	select WATCHDOG_CORE
 168	help
 169	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
 170	  the watchdog triggers the system will be reset.
 171
 172config XILINX_WATCHDOG
 173	tristate "Xilinx Watchdog timer"
 174	depends on HAS_IOMEM
 175	select WATCHDOG_CORE
 176	help
 177	  Watchdog driver for the xps_timebase_wdt ip core.
 178
 179	  To compile this driver as a module, choose M here: the
 180	  module will be called of_xilinx_wdt.
 181
 182config ZIIRAVE_WATCHDOG
 183	tristate "Zodiac RAVE Watchdog Timer"
 184	depends on I2C
 185	select WATCHDOG_CORE
 186	help
 187	  Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog
 188	  Processor.
 189
 190	  To compile this driver as a module, choose M here: the
 191	  module will be called ziirave_wdt.
 192
 193# ALPHA Architecture
 194
 195# ARM Architecture
 196
 197config ARM_SP805_WATCHDOG
 198	tristate "ARM SP805 Watchdog"
 199	depends on (ARM || ARM64) && ARM_AMBA
 200	select WATCHDOG_CORE
 201	help
 202	  ARM Primecell SP805 Watchdog timer. This will reboot your system when
 203	  the timeout is reached.
 204
 205config ARM_SBSA_WATCHDOG
 206	tristate "ARM SBSA Generic Watchdog"
 207	depends on ARM64
 208	depends on ARM_ARCH_TIMER
 209	select WATCHDOG_CORE
 210	help
 211	  ARM SBSA Generic Watchdog has two stage timeouts:
 212	  the first signal (WS0) is for alerting the system by interrupt,
 213	  the second one (WS1) is a real hardware reset.
 214	  More details: ARM DEN0029B - Server Base System Architecture (SBSA)
 215
 216	  This driver can operate ARM SBSA Generic Watchdog as a single stage
 217	  or a two stages watchdog, it depends on the module parameter "action".
 218
 219	  Note: the maximum timeout in the two stages mode is half of that in
 220	  the single stage mode.
 221
 222	  To compile this driver as module, choose M here: The module
 223	  will be called sbsa_gwdt.
 224
 225config ASM9260_WATCHDOG
 226	tristate "Alphascale ASM9260 watchdog"
 227	depends on MACH_ASM9260
 228	depends on OF
 229	select WATCHDOG_CORE
 230	select RESET_CONTROLLER
 231	help
 232	  Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
 233	  system when the timeout is reached.
 234
 235config AT91RM9200_WATCHDOG
 236	tristate "AT91RM9200 watchdog"
 237	depends on SOC_AT91RM9200 && MFD_SYSCON
 238	help
 239	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 240	  system when the timeout is reached.
 241
 242config AT91SAM9X_WATCHDOG
 243	tristate "AT91SAM9X / AT91CAP9 watchdog"
 244	depends on ARCH_AT91
 245	select WATCHDOG_CORE
 246	help
 247	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
 248	  reboot your system when the timeout is reached.
 249
 250config SAMA5D4_WATCHDOG
 251	tristate "Atmel SAMA5D4 Watchdog Timer"
 252	depends on ARCH_AT91
 253	select WATCHDOG_CORE
 254	help
 255	  Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
 256	  Its Watchdog Timer Mode Register can be written more than once.
 257	  This will reboot your system when the timeout is reached.
 258
 259config CADENCE_WATCHDOG
 260	tristate "Cadence Watchdog Timer"
 261	depends on HAS_IOMEM
 262	select WATCHDOG_CORE
 263	help
 264	  Say Y here if you want to include support for the watchdog
 265	  timer in the Xilinx Zynq.
 266
 267config 21285_WATCHDOG
 268	tristate "DC21285 watchdog"
 269	depends on FOOTBRIDGE
 270	help
 271	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
 272	  here if you wish to use this. Alternatively say M to compile the
 273	  driver as a module, which will be called wdt285.
 274
 275	  This driver does not work on all machines. In particular, early CATS
 276	  boards have hardware problems that will cause the machine to simply
 277	  lock up if the watchdog fires.
 278
 279	  "If in doubt, leave it out" - say N.
 280
 281config 977_WATCHDOG
 282	tristate "NetWinder WB83C977 watchdog"
 283	depends on FOOTBRIDGE && ARCH_NETWINDER
 284	help
 285	  Say Y here to include support for the WB977 watchdog included in
 286	  NetWinder machines. Alternatively say M to compile the driver as
 287	  a module, which will be called wdt977.
 288
 289	  Not sure? It's safe to say N.
 290
 
 
 
 
 
 
 
 
 
 
 
 291config IXP4XX_WATCHDOG
 292	tristate "IXP4xx Watchdog"
 293	depends on ARCH_IXP4XX
 294	help
 295	  Say Y here if to include support for the watchdog timer
 296	  in the Intel IXP4xx network processors. This driver can
 297	  be built as a module by choosing M. The module will
 298	  be called ixp4xx_wdt.
 299
 300	  Note: The internal IXP4xx watchdog does a soft CPU reset
 301	  which doesn't reset any peripherals. There are circumstances
 302	  where the watchdog will fail to reset the board correctly
 303	  (e.g., if the boot ROM is in an unreadable state).
 304
 305	  Say N if you are unsure.
 306
 307config KS8695_WATCHDOG
 308	tristate "KS8695 watchdog"
 309	depends on ARCH_KS8695
 310	help
 311	  Watchdog timer embedded into KS8695 processor. This will reboot your
 312	  system when the timeout is reached.
 313
 314config HAVE_S3C2410_WATCHDOG
 315	bool
 316	help
 317	  This will include watchdog timer support for Samsung SoCs. If
 318	  you want to include watchdog support for any machine, kindly
 319	  select this in the respective mach-XXXX/Kconfig file.
 320
 321config S3C2410_WATCHDOG
 322	tristate "S3C2410 Watchdog"
 323	depends on HAVE_S3C2410_WATCHDOG
 324	select WATCHDOG_CORE
 325	select MFD_SYSCON if ARCH_EXYNOS5
 326	help
 327	  Watchdog timer block in the Samsung SoCs. This will reboot
 328	  the system when the timer expires with the watchdog enabled.
 329
 330	  The driver is limited by the speed of the system's PCLK
 331	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
 332	  then watchdog intervals of over approximately 20seconds are
 333	  unavailable.
 334
 335	  The driver can be built as a module by choosing M, and will
 336	  be called s3c2410_wdt
 337
 338config SA1100_WATCHDOG
 339	tristate "SA1100/PXA2xx watchdog"
 340	depends on ARCH_SA1100 || ARCH_PXA
 341	help
 342	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
 343	  reboot your system when timeout is reached.
 344
 345	  NOTE: once enabled, this timer cannot be disabled.
 346
 347	  To compile this driver as a module, choose M here: the
 348	  module will be called sa1100_wdt.
 349
 350config DW_WATCHDOG
 351	tristate "Synopsys DesignWare watchdog"
 352	depends on HAS_IOMEM
 353	select WATCHDOG_CORE
 354	help
 355	  Say Y here if to include support for the Synopsys DesignWare
 356	  watchdog timer found in many chips.
 357	  To compile this driver as a module, choose M here: the
 358	  module will be called dw_wdt.
 359
 
 
 
 
 
 
 
 
 
 360config EP93XX_WATCHDOG
 361	tristate "EP93xx Watchdog"
 362	depends on ARCH_EP93XX
 363	select WATCHDOG_CORE
 364	help
 365	  Say Y here if to include support for the watchdog timer
 366	  embedded in the Cirrus Logic EP93xx family of devices.
 367
 368	  To compile this driver as a module, choose M here: the
 369	  module will be called ep93xx_wdt.
 370
 371config OMAP_WATCHDOG
 372	tristate "OMAP Watchdog"
 373	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 374	select WATCHDOG_CORE
 375	help
 376	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
 377	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 378
 379config PNX4008_WATCHDOG
 380	tristate "LPC32XX Watchdog"
 381	depends on ARCH_LPC32XX
 382	select WATCHDOG_CORE
 383	help
 384	  Say Y here if to include support for the watchdog timer
 385	  in the LPC32XX processor.
 386	  This driver can be built as a module by choosing M. The module
 387	  will be called pnx4008_wdt.
 388
 389	  Say N if you are unsure.
 390
 391config IOP_WATCHDOG
 392	tristate "IOP Watchdog"
 393	depends on ARCH_IOP13XX
 394	select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
 395	help
 396	  Say Y here if to include support for the watchdog timer
 397	  in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
 398	  be built as a module by choosing M. The module will
 399	  be called iop_wdt.
 400
 401	  Note: The IOP13XX watchdog does an Internal Bus Reset which will
 402	  affect both cores and the peripherals of the IOP.  The ATU-X
 403	  and/or ATUe configuration registers will remain intact, but if
 404	  operating as an Root Complex and/or Central Resource, the PCI-X
 405	  and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
 406
 407config DAVINCI_WATCHDOG
 408	tristate "DaVinci watchdog"
 409	depends on ARCH_DAVINCI || ARCH_KEYSTONE
 410	select WATCHDOG_CORE
 411	help
 412	  Say Y here if to include support for the watchdog timer
 413	  in the DaVinci DM644x/DM646x or Keystone processors.
 414	  To compile this driver as a module, choose M here: the
 415	  module will be called davinci_wdt.
 416
 417	  NOTE: once enabled, this timer cannot be disabled.
 418	  Say N if you are unsure.
 419
 420config ORION_WATCHDOG
 421	tristate "Orion watchdog"
 422	depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU
 423	depends on ARM
 424	select WATCHDOG_CORE
 425	help
 426	  Say Y here if to include support for the watchdog timer
 427	  in the Marvell Orion5x and Kirkwood ARM SoCs.
 428	  To compile this driver as a module, choose M here: the
 429	  module will be called orion_wdt.
 430
 431config RN5T618_WATCHDOG
 432	tristate "Ricoh RN5T618 watchdog"
 433	depends on MFD_RN5T618
 434	select WATCHDOG_CORE
 435	help
 436	  If you say yes here you get support for watchdog on the Ricoh
 437	  RN5T618 PMIC.
 438
 439	  This driver can also be built as a module.  If so, the module
 440	  will be called rn5t618_wdt.
 441
 442config SUNXI_WATCHDOG
 443	tristate "Allwinner SoCs watchdog support"
 444	depends on ARCH_SUNXI
 445	select WATCHDOG_CORE
 446	help
 447	  Say Y here to include support for the watchdog timer
 448	  in Allwinner SoCs.
 449	  To compile this driver as a module, choose M here: the
 450	  module will be called sunxi_wdt.
 451
 452config COH901327_WATCHDOG
 453	bool "ST-Ericsson COH 901 327 watchdog"
 454	depends on ARCH_U300
 455	default y if MACH_U300
 456	select WATCHDOG_CORE
 457	help
 458	  Say Y here to include Watchdog timer support for the
 459	  watchdog embedded into the ST-Ericsson U300 series platforms.
 460	  This watchdog is used to reset the system and thus cannot be
 461	  compiled as a module.
 462
 463config TWL4030_WATCHDOG
 464	tristate "TWL4030 Watchdog"
 465	depends on TWL4030_CORE
 466	select WATCHDOG_CORE
 467	help
 468	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
 469	  watchdog timer support for TWL4030 chips.
 470
 471config STMP3XXX_RTC_WATCHDOG
 472	tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
 473	depends on RTC_DRV_STMP
 474	select WATCHDOG_CORE
 475	help
 476	  Say Y here to include support for the watchdog timer inside
 477	  the RTC for the STMP37XX/378X or i.MX23/28 SoC.
 478	  To compile this driver as a module, choose M here: the
 479	  module will be called stmp3xxx_rtc_wdt.
 480
 481config NUC900_WATCHDOG
 482	tristate "Nuvoton NUC900 watchdog"
 483	depends on ARCH_W90X900
 484	help
 485	  Say Y here if to include support for the watchdog timer
 486	  for the Nuvoton NUC900 series SoCs.
 487	  To compile this driver as a module, choose M here: the
 488	  module will be called nuc900_wdt.
 489
 490config TS4800_WATCHDOG
 491	tristate "TS-4800 Watchdog"
 492	depends on HAS_IOMEM && OF
 493	depends on SOC_IMX51 || COMPILE_TEST
 494	select WATCHDOG_CORE
 495	select MFD_SYSCON
 496	help
 497	  Technologic Systems TS-4800 has watchdog timer implemented in
 498	  an external FPGA. Say Y here if you want to support for the
 499	  watchdog timer on TS-4800 board.
 500
 501config TS72XX_WATCHDOG
 502	tristate "TS-72XX SBC Watchdog"
 503	depends on MACH_TS72XX
 504	help
 505	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
 506	  watchdog timer implemented in a external CPLD chip. Say Y here
 507	  if you want to support for the watchdog timer on TS-72XX boards.
 508
 509	  To compile this driver as a module, choose M here: the
 510	  module will be called ts72xx_wdt.
 511
 512config MAX63XX_WATCHDOG
 513	tristate "Max63xx watchdog"
 514	depends on HAS_IOMEM
 515	select WATCHDOG_CORE
 516	help
 517	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
 518
 519config IMX2_WDT
 520	tristate "IMX2+ Watchdog"
 521	depends on ARCH_MXC || ARCH_LAYERSCAPE
 522	select REGMAP_MMIO
 523	select WATCHDOG_CORE
 524	help
 525	  This is the driver for the hardware watchdog
 526	  on the Freescale IMX2 and later processors.
 527	  If you have one of these processors and wish to have
 528	  watchdog support enabled, say Y, otherwise say N.
 529
 530	  To compile this driver as a module, choose M here: the
 531	  module will be called imx2_wdt.
 532
 533config UX500_WATCHDOG
 534	tristate "ST-Ericsson Ux500 watchdog"
 535	depends on MFD_DB8500_PRCMU
 536	select WATCHDOG_CORE
 537	default y
 538	help
 539	  Say Y here to include Watchdog timer support for the watchdog
 540	  existing in the prcmu of ST-Ericsson Ux500 series platforms.
 541
 542	  To compile this driver as a module, choose M here: the
 543	  module will be called ux500_wdt.
 544
 545config RETU_WATCHDOG
 546	tristate "Retu watchdog"
 547	depends on MFD_RETU
 548	select WATCHDOG_CORE
 549	help
 550	  Retu watchdog driver for Nokia Internet Tablets (770, N800,
 551	  N810). At least on N800 the watchdog cannot be disabled, so
 552	  this driver is essential and you should enable it.
 553
 554	  To compile this driver as a module, choose M here: the
 555	  module will be called retu_wdt.
 556
 557config MOXART_WDT
 558	tristate "MOXART watchdog"
 559	depends on ARCH_MOXART
 560	help
 561	  Say Y here to include Watchdog timer support for the watchdog
 562	  existing on the MOXA ART SoC series platforms.
 563
 564	  To compile this driver as a module, choose M here: the
 565	  module will be called moxart_wdt.
 566
 567config SIRFSOC_WATCHDOG
 568	tristate "SiRFSOC watchdog"
 569	depends on ARCH_SIRF
 570	select WATCHDOG_CORE
 571	default y
 572	help
 573	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
 574	  the watchdog triggers the system will be reset.
 575
 576config ST_LPC_WATCHDOG
 577	tristate "STMicroelectronics LPC Watchdog"
 578	depends on ARCH_STI
 579	depends on OF
 580	select WATCHDOG_CORE
 581	help
 582	  Say Y here to include STMicroelectronics Low Power Controller
 583	  (LPC) based Watchdog timer support.
 584
 585	  To compile this driver as a module, choose M here: the
 586	  module will be called st_lpc_wdt.
 587
 588config TEGRA_WATCHDOG
 589	tristate "Tegra watchdog"
 590	depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
 591	select WATCHDOG_CORE
 592	help
 593	  Say Y here to include support for the watchdog timer
 594	  embedded in NVIDIA Tegra SoCs.
 595
 596	  To compile this driver as a module, choose M here: the
 597	  module will be called tegra_wdt.
 598
 599config QCOM_WDT
 600	tristate "QCOM watchdog"
 601	depends on HAS_IOMEM
 602	depends on ARCH_QCOM
 603	select WATCHDOG_CORE
 604	help
 605	  Say Y here to include Watchdog timer support for the watchdog found
 606	  on QCOM chipsets.  Currently supported targets are the MSM8960,
 607	  APQ8064, and IPQ8064.
 608
 609	  To compile this driver as a module, choose M here: the
 610	  module will be called qcom_wdt.
 611
 612config MESON_WATCHDOG
 613	tristate "Amlogic Meson SoCs watchdog support"
 614	depends on ARCH_MESON
 615	select WATCHDOG_CORE
 616	help
 617	  Say Y here to include support for the watchdog timer
 618	  in Amlogic Meson SoCs.
 619	  To compile this driver as a module, choose M here: the
 620	  module will be called meson_wdt.
 621
 622config MEDIATEK_WATCHDOG
 623	tristate "Mediatek SoCs watchdog support"
 624	depends on ARCH_MEDIATEK
 625	select WATCHDOG_CORE
 626	help
 627	  Say Y here to include support for the watchdog timer
 628	  in Mediatek SoCs.
 629	  To compile this driver as a module, choose M here: the
 630	  module will be called mtk_wdt.
 631
 632config DIGICOLOR_WATCHDOG
 633	tristate "Conexant Digicolor SoCs watchdog support"
 634	depends on ARCH_DIGICOLOR
 635	select WATCHDOG_CORE
 636	help
 637	  Say Y here to include support for the watchdog timer
 638	  in Conexant Digicolor SoCs.
 639	  To compile this driver as a module, choose M here: the
 640	  module will be called digicolor_wdt.
 641
 642config LPC18XX_WATCHDOG
 643	tristate "LPC18xx/43xx Watchdog"
 644	depends on ARCH_LPC18XX || COMPILE_TEST
 645	depends on HAS_IOMEM
 646	select WATCHDOG_CORE
 647	help
 648	  Say Y here if to include support for the watchdog timer
 649	  in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
 650	  processors.
 651	  To compile this driver as a module, choose M here: the
 652	  module will be called lpc18xx_wdt.
 653
 654config ATLAS7_WATCHDOG
 655	tristate "CSRatlas7 watchdog"
 656	depends on ARCH_ATLAS7
 657	help
 658	  Say Y here to include Watchdog timer support for the watchdog
 659	  existing on the CSRatlas7 series platforms.
 660
 661	  To compile this driver as a module, choose M here: the
 662	  module will be called atlas7_wdt.
 663
 664# AVR32 Architecture
 665
 666config AT32AP700X_WDT
 667	tristate "AT32AP700x watchdog"
 668	depends on CPU_AT32AP700X
 669	help
 670	  Watchdog timer embedded into AT32AP700x devices. This will reboot
 671	  your system when the timeout is reached.
 672
 673# BLACKFIN Architecture
 674
 675config BFIN_WDT
 676	tristate "Blackfin On-Chip Watchdog Timer"
 677	depends on BLACKFIN
 678	---help---
 679	  If you say yes here you will get support for the Blackfin On-Chip
 680	  Watchdog Timer. If you have one of these processors and wish to
 681	  have watchdog support enabled, say Y, otherwise say N.
 682
 683	  To compile this driver as a module, choose M here: the
 684	  module will be called bfin_wdt.
 685
 686# CRIS Architecture
 687
 688# FRV Architecture
 689
 
 
 690# X86 (i386 + ia64 + x86_64) Architecture
 691
 692config ACQUIRE_WDT
 693	tristate "Acquire SBC Watchdog Timer"
 694	depends on X86
 695	---help---
 696	  This is the driver for the hardware watchdog on Single Board
 697	  Computers produced by Acquire Inc (and others). This watchdog
 698	  simply watches your kernel to make sure it doesn't freeze, and if
 699	  it does, it reboots your computer after a certain amount of time.
 700
 701	  To compile this driver as a module, choose M here: the
 702	  module will be called acquirewdt.
 703
 704	  Most people will say N.
 705
 706config ADVANTECH_WDT
 707	tristate "Advantech SBC Watchdog Timer"
 708	depends on X86
 709	help
 710	  If you are configuring a Linux kernel for the Advantech single-board
 711	  computer, say `Y' here to support its built-in watchdog timer
 712	  feature. More information can be found at
 713	  <http://www.advantech.com.tw/products/>
 714
 715config ALIM1535_WDT
 716	tristate "ALi M1535 PMU Watchdog Timer"
 717	depends on X86 && PCI
 718	---help---
 719	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
 720
 721	  To compile this driver as a module, choose M here: the
 722	  module will be called alim1535_wdt.
 723
 724	  Most people will say N.
 725
 726config ALIM7101_WDT
 727	tristate "ALi M7101 PMU Computer Watchdog"
 728	depends on PCI
 729	help
 730	  This is the driver for the hardware watchdog on the ALi M7101 PMU
 731	  as used in the x86 Cobalt servers and also found in some
 732	  SPARC Netra servers too.
 733
 734	  To compile this driver as a module, choose M here: the
 735	  module will be called alim7101_wdt.
 736
 737	  Most people will say N.
 738
 739config EBC_C384_WDT
 740	tristate "WinSystems EBC-C384 Watchdog Timer"
 741	depends on X86
 742	select WATCHDOG_CORE
 743	help
 744	  Enables watchdog timer support for the watchdog timer on the
 745	  WinSystems EBC-C384 motherboard. The timeout may be configured via
 746	  the timeout module parameter.
 747
 748config F71808E_WDT
 749	tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
 750	depends on X86
 751	help
 752	  This is the driver for the hardware watchdog on the Fintek
 753	  F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
 754
 755	  You can compile this driver directly into the kernel, or use
 756	  it as a module.  The module will be called f71808e_wdt.
 757
 758config SP5100_TCO
 759	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
 760	depends on X86 && PCI
 761	---help---
 762	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
 763	  (Total Cost of Ownership) timer is a watchdog timer that will reboot
 764	  the machine after its expiration. The expiration time can be
 765	  configured with the "heartbeat" parameter.
 766
 767	  To compile this driver as a module, choose M here: the
 768	  module will be called sp5100_tco.
 769
 770config GEODE_WDT
 771	tristate "AMD Geode CS5535/CS5536 Watchdog"
 772	depends on CS5535_MFGPT
 773	help
 774	  This driver enables a watchdog capability built into the
 775	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
 776	  processors.  This watchdog watches your kernel to make sure
 777	  it doesn't freeze, and if it does, it reboots your computer after
 778	  a certain amount of time.
 779
 780	  You can compile this driver directly into the kernel, or use
 781	  it as a module.  The module will be called geodewdt.
 782
 783config SC520_WDT
 784	tristate "AMD Elan SC520 processor Watchdog"
 785	depends on MELAN
 786	help
 787	  This is the driver for the hardware watchdog built in to the
 788	  AMD "Elan" SC520 microcomputer commonly used in embedded systems.
 789	  This watchdog simply watches your kernel to make sure it doesn't
 790	  freeze, and if it does, it reboots your computer after a certain
 791	  amount of time.
 792
 793	  You can compile this driver directly into the kernel, or use
 794	  it as a module.  The module will be called sc520_wdt.
 795
 796config SBC_FITPC2_WATCHDOG
 797	tristate "Compulab SBC-FITPC2 watchdog"
 798	depends on X86
 799	---help---
 800	  This is the driver for the built-in watchdog timer on the fit-PC2,
 801	  fit-PC2i, CM-iAM single-board computers made by Compulab.
 802
 803	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 804	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
 805
 806	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
 807	  so system will not be restarted while user in BIOS setup.
 808
 809	  Once watchdog was enabled the system will be restarted every
 810	  "Watchdog Timer Value" period, so to prevent it user can restart or
 811	  disable the watchdog.
 812
 813	  To compile this driver as a module, choose M here: the
 814	  module will be called sbc_fitpc2_wdt.
 815
 816	  Most people will say N.
 817
 818config EUROTECH_WDT
 819	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 820	depends on X86
 821	help
 822	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
 823	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
 824	  information are at <http://www.eurotech.it/>.
 825
 826config IB700_WDT
 827	tristate "IB700 SBC Watchdog Timer"
 828	depends on X86
 829	---help---
 830	  This is the driver for the hardware watchdog on the IB700 Single
 831	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
 832	  simply watches your kernel to make sure it doesn't freeze, and if
 833	  it does, it reboots your computer after a certain amount of time.
 834
 835	  This driver is like the WDT501 driver but for slightly different hardware.
 836
 837	  To compile this driver as a module, choose M here: the
 838	  module will be called ib700wdt.
 839
 840	  Most people will say N.
 841
 842config IBMASR
 843	tristate "IBM Automatic Server Restart"
 844	depends on X86
 845	help
 846	  This is the driver for the IBM Automatic Server Restart watchdog
 847	  timer built-in into some eServer xSeries machines.
 848
 849	  To compile this driver as a module, choose M here: the
 850	  module will be called ibmasr.
 851
 852config WAFER_WDT
 853	tristate "ICP Single Board Computer Watchdog Timer"
 854	depends on X86
 855	help
 856	  This is a driver for the hardware watchdog on the ICP Single
 857	  Board Computer. This driver is working on (at least) the following
 858	  IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
 859
 860	  To compile this driver as a module, choose M here: the
 861	  module will be called wafer5823wdt.
 862
 863config I6300ESB_WDT
 864	tristate "Intel 6300ESB Timer/Watchdog"
 865	depends on PCI
 866	---help---
 867	  Hardware driver for the watchdog timer built into the Intel
 868	  6300ESB controller hub.
 869
 870	  To compile this driver as a module, choose M here: the
 871	  module will be called i6300esb.
 872
 873config IE6XX_WDT
 874	tristate "Intel Atom E6xx Watchdog"
 875	depends on X86 && PCI
 876	select WATCHDOG_CORE
 877	select MFD_CORE
 878	select LPC_SCH
 879	---help---
 880	  Hardware driver for the watchdog timer built into the Intel
 881	  Atom E6XX (TunnelCreek) processor.
 882
 883	  To compile this driver as a module, choose M here: the
 884	  module will be called ie6xx_wdt.
 885
 886config INTEL_SCU_WATCHDOG
 887	bool "Intel SCU Watchdog for Mobile Platforms"
 888	depends on X86_INTEL_MID
 889	---help---
 890	  Hardware driver for the watchdog time built into the Intel SCU
 891	  for Intel Mobile Platforms.
 892
 893	  To compile this driver as a module, choose M here.
 894
 895config INTEL_MID_WATCHDOG
 896	tristate "Intel MID Watchdog Timer"
 897	depends on X86_INTEL_MID
 898	select WATCHDOG_CORE
 899	---help---
 900	  Watchdog timer driver built into the Intel SCU for Intel MID
 901	  Platforms.
 902
 903	  This driver currently supports only the watchdog evolution
 904	  implementation in SCU, available for Merrifield generation.
 905
 906	  To compile this driver as a module, choose M here.
 907
 908config ITCO_WDT
 909	tristate "Intel TCO Timer/Watchdog"
 910	depends on (X86 || IA64) && PCI
 911	select WATCHDOG_CORE
 912	depends on I2C || I2C=n
 913	select LPC_ICH if !EXPERT
 914	select I2C_I801 if !EXPERT && I2C
 915	---help---
 916	  Hardware driver for the intel TCO timer based watchdog devices.
 917	  These drivers are included in the Intel 82801 I/O Controller
 918	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 919	  controller hub.
 920
 921	  The TCO (Total Cost of Ownership) timer is a watchdog timer
 922	  that will reboot the machine after its second expiration. The
 923	  expiration time can be configured with the "heartbeat" parameter.
 924
 925	  On some motherboards the driver may fail to reset the chipset's
 926	  NO_REBOOT flag which prevents the watchdog from rebooting the
 927	  machine. If this is the case you will get a kernel message like
 928	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
 929
 930	  To compile this driver as a module, choose M here: the
 931	  module will be called iTCO_wdt.
 932
 933config ITCO_VENDOR_SUPPORT
 934	bool "Intel TCO Timer/Watchdog Specific Vendor Support"
 935	depends on ITCO_WDT
 936	---help---
 937	  Add vendor specific support to the intel TCO timer based watchdog
 938	  devices. At this moment we only have additional support for some
 939	  SuperMicro Inc. motherboards.
 940
 941config IT8712F_WDT
 942	tristate "IT8712F (Smart Guardian) Watchdog Timer"
 943	depends on X86
 944	---help---
 945	  This is the driver for the built-in watchdog timer on the IT8712F
 946	  Super I/0 chipset used on many motherboards.
 947
 948	  If the driver does not work, then make sure that the game port in
 949	  the BIOS is enabled.
 950
 951	  To compile this driver as a module, choose M here: the
 952	  module will be called it8712f_wdt.
 953
 954config IT87_WDT
 955	tristate "IT87 Watchdog Timer"
 956	depends on X86
 957	---help---
 958	  This is the driver for the hardware watchdog on the ITE IT8702,
 959	  IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
 960	  Super I/O chips.
 961
 962	  If the driver does not work, then make sure that the game port in
 963	  the BIOS is enabled.
 964
 965	  This watchdog simply watches your kernel to make sure it doesn't
 966	  freeze, and if it does, it reboots your computer after a certain
 967	  amount of time.
 968
 969	  To compile this driver as a module, choose M here: the module will
 970	  be called it87_wdt.
 971
 972config HP_WATCHDOG
 973	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
 974	depends on X86 && PCI
 975	help
 976	  A software monitoring watchdog and NMI sourcing driver. This driver
 977	  will detect lockups and provide a stack trace. This is a driver that
 978	  will only load on an HP ProLiant system with a minimum of iLO2 support.
 979	  To compile this driver as a module, choose M here: the module will be
 980	  called hpwdt.
 981
 982config KEMPLD_WDT
 983	tristate "Kontron COM Watchdog Timer"
 984	depends on MFD_KEMPLD
 985	select WATCHDOG_CORE
 986	help
 987	  Support for the PLD watchdog on some Kontron ETX and COMexpress
 988	  (ETXexpress) modules
 989
 990	  This driver can also be built as a module. If so, the module will be
 991	  called kempld_wdt.
 992
 993config HPWDT_NMI_DECODING
 994	bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
 995	depends on HP_WATCHDOG
 996	default y
 997	help
 998	  When an NMI occurs this feature will make the necessary BIOS calls to
 999	  log the cause of the NMI.
1000
1001config SC1200_WDT
1002	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
1003	depends on X86
1004	help
1005	  This is a driver for National Semiconductor PC87307/PC97307 hardware
1006	  watchdog cards as found on the SC1200. This watchdog is mainly used
1007	  for power management purposes and can be used to power down the device
1008	  during inactivity periods (includes interrupt activity monitoring).
1009
1010	  To compile this driver as a module, choose M here: the
1011	  module will be called sc1200wdt.
1012
1013	  Most people will say N.
1014
1015config SCx200_WDT
1016	tristate "National Semiconductor SCx200 Watchdog"
1017	depends on SCx200 && PCI
1018	help
1019	  Enable the built-in watchdog timer support on the National
1020	  Semiconductor SCx200 processors.
1021
1022	  If compiled as a module, it will be called scx200_wdt.
1023
1024config PC87413_WDT
1025	tristate "NS PC87413 watchdog"
1026	depends on X86
1027	---help---
1028	  This is the driver for the hardware watchdog on the PC87413 chipset
1029	  This watchdog simply watches your kernel to make sure it doesn't
1030	  freeze, and if it does, it reboots your computer after a certain
1031	  amount of time.
1032
1033	  To compile this driver as a module, choose M here: the
1034	  module will be called pc87413_wdt.
1035
1036	  Most people will say N.
1037
1038config NV_TCO
1039	tristate "nVidia TCO Timer/Watchdog"
1040	depends on X86 && PCI
1041	---help---
1042	  Hardware driver for the TCO timer built into the nVidia Hub family
1043	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
1044	  watchdog timer that will reboot the machine after its second
1045	  expiration. The expiration time can be configured with the
1046	  "heartbeat" parameter.
1047
1048	  On some motherboards the driver may fail to reset the chipset's
1049	  NO_REBOOT flag which prevents the watchdog from rebooting the
1050	  machine. If this is the case you will get a kernel message like
1051	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
1052
1053	  To compile this driver as a module, choose M here: the
1054	  module will be called nv_tco.
1055
1056config RDC321X_WDT
1057	tristate "RDC R-321x SoC watchdog"
1058	depends on X86_RDC321X
1059	help
1060	  This is the driver for the built in hardware watchdog
1061	  in the RDC R-321x SoC.
1062
1063	  To compile this driver as a module, choose M here: the
1064	  module will be called rdc321x_wdt.
1065
1066config 60XX_WDT
1067	tristate "SBC-60XX Watchdog Timer"
1068	depends on X86
1069	help
1070	  This driver can be used with the watchdog timer found on some
1071	  single board computers, namely the 6010 PII based computer.
1072	  It may well work with other cards.  It reads port 0x443 to enable
1073	  and re-set the watchdog timer, and reads port 0x45 to disable
1074	  the watchdog.  If you have a card that behave in similar ways,
1075	  you can probably make this driver work with your card as well.
1076
1077	  You can compile this driver directly into the kernel, or use
1078	  it as a module.  The module will be called sbc60xxwdt.
1079
1080config SBC8360_WDT
1081	tristate "SBC8360 Watchdog Timer"
1082	depends on X86_32
1083	---help---
1084
1085	  This is the driver for the hardware watchdog on the SBC8360 Single
1086	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
1087
1088	  To compile this driver as a module, choose M here: the
1089	  module will be called sbc8360.
1090
1091	  Most people will say N.
1092
1093config SBC7240_WDT
1094	tristate "SBC Nano 7240 Watchdog Timer"
1095	depends on X86_32 && !UML
1096	---help---
1097	  This is the driver for the hardware watchdog found on the IEI
1098	  single board computers EPIC Nano 7240 (and likely others). This
1099	  watchdog simply watches your kernel to make sure it doesn't freeze,
1100	  and if it does, it reboots your computer after a certain amount of
1101	  time.
1102
1103	  To compile this driver as a module, choose M here: the
1104	  module will be called sbc7240_wdt.
1105
1106config CPU5_WDT
1107	tristate "SMA CPU5 Watchdog"
1108	depends on X86
1109	---help---
1110	  TBD.
1111	  To compile this driver as a module, choose M here: the
1112	  module will be called cpu5wdt.
1113
1114config SMSC_SCH311X_WDT
1115	tristate "SMSC SCH311X Watchdog Timer"
1116	depends on X86
1117	---help---
1118	  This is the driver for the hardware watchdog timer on the
1119	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
1120	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
1121	  serial ports).
1122
1123	  To compile this driver as a module, choose M here: the
1124	  module will be called sch311x_wdt.
1125
1126config SMSC37B787_WDT
1127	tristate "Winbond SMsC37B787 Watchdog Timer"
1128	depends on X86
1129	---help---
1130	  This is the driver for the hardware watchdog component on the
1131	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
1132	  from Vision Systems and maybe others.
1133
1134	  This watchdog simply watches your kernel to make sure it doesn't
1135	  freeze, and if it does, it reboots your computer after a certain
1136	  amount of time.
1137
1138	  Usually a userspace daemon will notify the kernel WDT driver that
1139	  userspace is still alive, at regular intervals.
1140
1141	  To compile this driver as a module, choose M here: the
1142	  module will be called smsc37b787_wdt.
1143
1144	  Most people will say N.
1145
1146config VIA_WDT
1147	tristate "VIA Watchdog Timer"
1148	depends on X86 && PCI
1149	select WATCHDOG_CORE
1150	---help---
1151	This is the driver for the hardware watchdog timer on VIA
1152	southbridge chipset CX700, VX800/VX820 or VX855/VX875.
 
 
 
 
1153
1154	To compile this driver as a module, choose M here; the module
1155	will be called via_wdt.
1156
1157	Most people will say N.
1158
1159config W83627HF_WDT
1160	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
1161	depends on X86
1162	select WATCHDOG_CORE
1163	---help---
1164	  This is the driver for the hardware watchdog on the following
1165	  Super I/O chips.
1166		W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
1167		W83637HF
1168		W83667HG/HG-B
1169		W83687THF
1170		W83697HF
1171		W83697UG
1172		NCT6775
1173		NCT6776
1174		NCT6779
1175		NCT6791
1176		NCT6792
1177		NCT6102D/04D/06D
1178
 
 
 
 
 
 
 
 
 
 
 
1179	  This watchdog simply watches your kernel to make sure it doesn't
1180	  freeze, and if it does, it reboots your computer after a certain
1181	  amount of time.
1182
1183	  To compile this driver as a module, choose M here: the
1184	  module will be called w83627hf_wdt.
1185
1186	  Most people will say N.
1187
1188config W83877F_WDT
1189	tristate "W83877F (EMACS) Watchdog Timer"
1190	depends on X86
1191	---help---
1192	  This is the driver for the hardware watchdog on the W83877F chipset
1193	  as used in EMACS PC-104 motherboards (and likely others).  This
1194	  watchdog simply watches your kernel to make sure it doesn't freeze,
1195	  and if it does, it reboots your computer after a certain amount of
1196	  time.
1197
1198	  To compile this driver as a module, choose M here: the
1199	  module will be called w83877f_wdt.
1200
1201	  Most people will say N.
1202
1203config W83977F_WDT
1204	tristate "W83977F (PCM-5335) Watchdog Timer"
1205	depends on X86
1206	---help---
1207	  This is the driver for the hardware watchdog on the W83977F I/O chip
1208	  as used in AAEON's PCM-5335 SBC (and likely others).  This
1209	  watchdog simply watches your kernel to make sure it doesn't freeze,
1210	  and if it does, it reboots your computer after a certain amount of
1211	  time.
1212
1213	  To compile this driver as a module, choose M here: the
1214	  module will be called w83977f_wdt.
1215
1216config MACHZ_WDT
1217	tristate "ZF MachZ Watchdog"
1218	depends on X86
1219	---help---
1220	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
1221	  N.  This is the driver for the watchdog timer built-in on that
1222	  processor using ZF-Logic interface.  This watchdog simply watches
1223	  your kernel to make sure it doesn't freeze, and if it does, it
1224	  reboots your computer after a certain amount of time.
1225
1226	  To compile this driver as a module, choose M here: the
1227	  module will be called machzwd.
1228
1229config SBC_EPX_C3_WATCHDOG
1230	tristate "Winsystems SBC EPX-C3 watchdog"
1231	depends on X86
1232	---help---
1233	  This is the driver for the built-in watchdog timer on the EPX-C3
1234	  Single-board computer made by Winsystems, Inc.
1235
1236	  *Note*: This hardware watchdog is not probeable and thus there
1237	  is no way to know if writing to its IO address will corrupt
1238	  your system or have any real effect.  The only way to be sure
1239	  that this driver does what you want is to make sure you
1240	  are running it on an EPX-C3 from Winsystems with the watchdog
1241	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
1242	  IO ports.  Basically, the assumption is made that if you compile
1243	  this driver into your kernel and/or load it as a module, that you
1244	  know what you are doing and that you are in fact running on an
1245	  EPX-C3 board!
1246
1247	  To compile this driver as a module, choose M here: the
1248	  module will be called sbc_epx_c3.
1249
1250config INTEL_MEI_WDT
1251	tristate "Intel MEI iAMT Watchdog"
1252	depends on INTEL_MEI && X86
1253	select WATCHDOG_CORE
1254	---help---
1255	  A device driver for the Intel MEI iAMT watchdog.
1256
1257	  The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog.
1258	  Whenever the OS hangs or crashes, iAMT will send an event
1259	  to any subscriber to this event. The watchdog doesn't reset the
1260	  the platform.
1261
1262	  To compile this driver as a module, choose M here:
1263	  the module will be called mei_wdt.
1264
1265config NI903X_WDT
1266	tristate "NI 903x/913x Watchdog"
1267	depends on X86 && ACPI
1268	select WATCHDOG_CORE
1269	---help---
1270	  This is the driver for the watchdog timer on the National Instruments
1271	  903x/913x real-time controllers.
1272
1273	  To compile this driver as a module, choose M here: the module will be
1274	  called ni903x_wdt.
1275
1276# M32R Architecture
1277
1278# M68K Architecture
1279
1280config M54xx_WATCHDOG
1281	tristate "MCF54xx watchdog support"
1282	depends on M548x
1283	help
1284	  To compile this driver as a module, choose M here: the
1285	  module will be called m54xx_wdt.
1286
1287# MicroBlaze Architecture
1288
 
 
 
 
 
 
 
 
 
 
 
 
1289# MIPS Architecture
1290
1291config ATH79_WDT
1292	tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
1293	depends on ATH79
1294	help
1295	  Hardware driver for the built-in watchdog timer on the Atheros
1296	  AR71XX/AR724X/AR913X SoCs.
1297
1298config BCM47XX_WDT
1299	tristate "Broadcom BCM47xx Watchdog Timer"
1300	depends on BCM47XX || ARCH_BCM_5301X
1301	select WATCHDOG_CORE
1302	help
1303	  Hardware driver for the Broadcom BCM47xx Watchdog Timer.
1304
1305config RC32434_WDT
1306	tristate "IDT RC32434 SoC Watchdog Timer"
1307	depends on MIKROTIK_RB532
1308	help
1309	  Hardware driver for the IDT RC32434 SoC built-in
1310	  watchdog timer.
1311
1312	  To compile this driver as a module, choose M here: the
1313	  module will be called rc32434_wdt.
1314
1315config INDYDOG
1316	tristate "Indy/I2 Hardware Watchdog"
1317	depends on SGI_HAS_INDYDOG
1318	help
1319	  Hardware driver for the Indy's/I2's watchdog. This is a
1320	  watchdog timer that will reboot the machine after a 60 second
1321	  timer expired and no process has written to /dev/watchdog during
1322	  that time.
1323
1324config JZ4740_WDT
1325	tristate "Ingenic jz4740 SoC hardware watchdog"
1326	depends on MACH_JZ4740
1327	select WATCHDOG_CORE
1328	help
1329	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
1330
1331config WDT_MTX1
1332	tristate "MTX-1 Hardware Watchdog"
1333	depends on MIPS_MTX1
1334	help
1335	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
1336	  will reboot the machine after a 100 seconds timer expired.
1337
1338config PNX833X_WDT
1339	tristate "PNX833x Hardware Watchdog"
1340	depends on SOC_PNX8335
1341	help
1342	  Hardware driver for the PNX833x's watchdog. This is a
1343	  watchdog timer that will reboot the machine after a programmable
1344	  timer has expired and no process has written to /dev/watchdog during
1345	  that time.
1346
1347config SIBYTE_WDOG
1348	tristate "Sibyte SoC hardware watchdog"
1349	depends on CPU_SB1
1350	help
1351	  Watchdog driver for the built in watchdog hardware in Sibyte
1352	  SoC processors.  There are apparently two watchdog timers
1353	  on such processors; this driver supports only the first one,
1354	  because currently Linux only supports exporting one watchdog
1355	  to userspace.
1356
1357	  To compile this driver as a loadable module, choose M here.
1358	  The module will be called sb_wdog.
1359
1360config AR7_WDT
1361	tristate "TI AR7 Watchdog Timer"
1362	depends on AR7
1363	help
1364	  Hardware driver for the TI AR7 Watchdog Timer.
1365
1366config TXX9_WDT
1367	tristate "Toshiba TXx9 Watchdog Timer"
1368	depends on CPU_TX39XX || CPU_TX49XX
1369	select WATCHDOG_CORE
1370	help
1371	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
1372
1373config OCTEON_WDT
1374	tristate "Cavium OCTEON SOC family Watchdog Timer"
1375	depends on CAVIUM_OCTEON_SOC
1376	default y
1377	select WATCHDOG_CORE
1378	select EXPORT_UASM if OCTEON_WDT = m
1379	help
1380	  Hardware driver for OCTEON's on chip watchdog timer.
1381	  Enables the watchdog for all cores running Linux. It
1382	  installs a NMI handler and pokes the watchdog based on an
1383	  interrupt.  On first expiration of the watchdog, the
1384	  interrupt handler pokes it.  The second expiration causes an
1385	  NMI that prints a message. The third expiration causes a
1386	  global soft reset.
1387
1388	  When userspace has /dev/watchdog open, no poking is done
1389	  from the first interrupt, it is then only poked when the
1390	  device is written.
1391
1392config BCM63XX_WDT
1393	tristate "Broadcom BCM63xx hardware watchdog"
1394	depends on BCM63XX
1395	help
1396	  Watchdog driver for the built in watchdog hardware in Broadcom
1397	  BCM63xx SoC.
1398
1399	  To compile this driver as a loadable module, choose M here.
1400	  The module will be called bcm63xx_wdt.
1401
1402config BCM2835_WDT
1403	tristate "Broadcom BCM2835 hardware watchdog"
1404	depends on ARCH_BCM2835
1405	select WATCHDOG_CORE
1406	help
1407	  Watchdog driver for the built in watchdog hardware in Broadcom
1408	  BCM2835 SoC.
1409
1410	  To compile this driver as a loadable module, choose M here.
1411	  The module will be called bcm2835_wdt.
1412
1413config BCM_KONA_WDT
1414	tristate "BCM Kona Watchdog"
1415	depends on ARCH_BCM_MOBILE
1416	select WATCHDOG_CORE
1417	help
1418	  Support for the watchdog timer on the following Broadcom BCM281xx
1419	  family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
1420	  BCM28155 variants.
1421
1422	  Say 'Y' or 'M' here to enable the driver. The module will be called
1423	  bcm_kona_wdt.
1424
1425config BCM_KONA_WDT_DEBUG
1426	bool "DEBUGFS support for BCM Kona Watchdog"
1427	depends on BCM_KONA_WDT
1428	help
1429	  If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
1430	  access to the driver's internal data structures as well as watchdog
1431	  timer hardware registres.
1432
1433	  If in doubt, say 'N'.
1434
1435config BCM7038_WDT
1436	tristate "BCM7038 Watchdog"
1437	select WATCHDOG_CORE
1438	depends on HAS_IOMEM
1439	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
1440	help
1441	 Watchdog driver for the built-in hardware in Broadcom 7038 and
1442	 later SoCs used in set-top boxes.  BCM7038 was made public
1443	 during the 2004 CES, and since then, many Broadcom chips use this
1444	 watchdog block, including some cable modem chips.
1445
1446config IMGPDC_WDT
1447	tristate "Imagination Technologies PDC Watchdog Timer"
1448	depends on HAS_IOMEM
1449	depends on METAG || MIPS || COMPILE_TEST
1450	select WATCHDOG_CORE
1451	help
1452	  Driver for Imagination Technologies PowerDown Controller
1453	  Watchdog Timer.
1454
1455	  To compile this driver as a loadable module, choose M here.
1456	  The module will be called imgpdc_wdt.
1457
1458config LANTIQ_WDT
1459	tristate "Lantiq SoC watchdog"
1460	depends on LANTIQ
1461	help
1462	  Hardware driver for the Lantiq SoC Watchdog Timer.
1463
1464config RALINK_WDT
1465	tristate "Ralink SoC watchdog"
1466	select WATCHDOG_CORE
1467	depends on RALINK
1468	help
1469	  Hardware driver for the Ralink SoC Watchdog Timer.
1470
1471config MT7621_WDT
1472	tristate "Mediatek SoC watchdog"
1473	select WATCHDOG_CORE
1474	depends on SOC_MT7620 || SOC_MT7621
1475	help
1476	  Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
1477
1478# PARISC Architecture
1479
1480# POWERPC Architecture
1481
1482config GEF_WDT
1483	tristate "GE Watchdog Timer"
1484	depends on GE_FPGA
1485	---help---
1486	  Watchdog timer found in a number of GE single board computers.
1487
1488config MPC5200_WDT
1489	bool "MPC52xx Watchdog Timer"
1490	depends on PPC_MPC52xx
1491	help
1492	  Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
1493
1494config 8xxx_WDT
1495	tristate "MPC8xxx Platform Watchdog Timer"
1496	depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x
1497	select WATCHDOG_CORE
1498	help
1499	  This driver is for a SoC level watchdog that exists on some
1500	  Freescale PowerPC processors. So far this driver supports:
1501	  - MPC8xx watchdogs
1502	  - MPC83xx watchdogs
1503	  - MPC86xx watchdogs
1504
1505	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
1506
1507config MV64X60_WDT
1508	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
1509	depends on MV64X60
1510
1511config PIKA_WDT
1512	tristate "PIKA FPGA Watchdog"
1513	depends on WARP
1514	default y
1515	help
1516	  This enables the watchdog in the PIKA FPGA. Currently used on
1517	  the Warp platform.
1518
1519config BOOKE_WDT
1520	tristate "PowerPC Book-E Watchdog Timer"
1521	depends on BOOKE || 4xx
1522	select WATCHDOG_CORE
1523	---help---
1524	  Watchdog driver for PowerPC Book-E chips, such as the Freescale
1525	  MPC85xx SOCs and the IBM PowerPC 440.
1526
1527	  Please see Documentation/watchdog/watchdog-api.txt for
1528	  more information.
1529
1530config BOOKE_WDT_DEFAULT_TIMEOUT
1531	int "PowerPC Book-E Watchdog Timer Default Timeout"
1532	depends on BOOKE_WDT
1533	default 38 if PPC_FSL_BOOK3E
1534	range 0 63 if PPC_FSL_BOOK3E
1535	default 3 if !PPC_FSL_BOOK3E
1536	range 0 3 if !PPC_FSL_BOOK3E
1537	help
1538	  Select the default watchdog timer period to be used by the PowerPC
1539	  Book-E watchdog driver.  A watchdog "event" occurs when the bit
1540	  position represented by this number transitions from zero to one.
1541
1542	  For Freescale Book-E processors, this is a number between 0 and 63.
1543	  For other Book-E processors, this is a number between 0 and 3.
1544
1545	  The value can be overridden by the wdt_period command-line parameter.
1546
1547config MEN_A21_WDT
1548       tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
1549       select WATCHDOG_CORE
1550       depends on GPIOLIB || COMPILE_TEST
1551       help
1552        Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
1553
1554	The driver can also be built as a module. If so, the module will be
1555	called mena21_wdt.
1556
1557	If unsure select N here.
1558
1559# PPC64 Architecture
1560
1561config WATCHDOG_RTAS
1562	tristate "RTAS watchdog"
1563	depends on PPC_RTAS
1564	help
1565	  This driver adds watchdog support for the RTAS watchdog.
1566
1567	  To compile this driver as a module, choose M here. The module
1568	  will be called wdrtas.
1569
1570# S390 Architecture
1571
1572config DIAG288_WATCHDOG
1573	tristate "System z diag288 Watchdog"
1574	depends on S390
1575	select WATCHDOG_CORE
1576	help
1577	  IBM s/390 and zSeries machines running under z/VM 5.1 or later
1578	  provide a virtual watchdog timer to their guest that cause a
1579	  user define Control Program command to be executed after a
1580	  timeout.
1581	  LPAR provides a very similar interface. This driver handles
1582	  both.
1583
1584	  To compile this driver as a module, choose M here. The module
1585	  will be called diag288_wdt.
1586
1587# SUPERH (sh + sh64) Architecture
1588
1589config SH_WDT
1590	tristate "SuperH Watchdog"
1591	depends on SUPERH && (CPU_SH3 || CPU_SH4)
1592	select WATCHDOG_CORE
1593	help
1594	  This driver adds watchdog support for the integrated watchdog in the
1595	  SuperH processors. If you have one of these processors and wish
1596	  to have watchdog support enabled, say Y, otherwise say N.
1597
1598	  As a side note, saying Y here will automatically boost HZ to 1000
1599	  so that the timer has a chance to clear the overflow counter. On
1600	  slower systems (such as the SH-2 and SH-3) this will likely yield
1601	  some performance issues. As such, the WDT should be avoided here
1602	  unless it is absolutely necessary.
1603
1604	  To compile this driver as a module, choose M here: the
1605	  module will be called shwdt.
1606
1607# SPARC Architecture
1608
1609# SPARC64 Architecture
1610
1611config WATCHDOG_CP1XXX
1612	tristate "CP1XXX Hardware Watchdog support"
1613	depends on SPARC64 && PCI
1614	---help---
1615	  This is the driver for the hardware watchdog timers present on
1616	  Sun Microsystems CompactPCI models CP1400 and CP1500.
1617
1618	  To compile this driver as a module, choose M here: the
1619	  module will be called cpwatchdog.
1620
1621	  If you do not have a CompactPCI model CP1400 or CP1500, or
1622	  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
1623	  you should say N to this option.
1624
1625config WATCHDOG_RIO
1626	tristate "RIO Hardware Watchdog support"
1627	depends on SPARC64 && PCI
1628	help
1629	  Say Y here to support the hardware watchdog capability on Sun RIO
1630	  machines.  The watchdog timeout period is normally one minute but
1631	  can be changed with a boot-time parameter.
1632
1633config WATCHDOG_SUN4V
1634	tristate "Sun4v Watchdog support"
1635	select WATCHDOG_CORE
1636	depends on SPARC64
1637	help
1638	  Say Y here to support the hypervisor watchdog capability embedded
1639	  in the SPARC sun4v architecture.
1640
1641	  To compile this driver as a module, choose M here. The module will
1642	  be called sun4v_wdt.
1643
1644# XTENSA Architecture
1645
1646# Xen Architecture
1647
1648config XEN_WDT
1649	tristate "Xen Watchdog support"
1650	depends on XEN
1651	help
1652	  Say Y here to support the hypervisor watchdog capability provided
1653	  by Xen 4.0 and newer.  The watchdog timeout period is normally one
1654	  minute but can be changed with a boot-time parameter.
1655
1656config UML_WATCHDOG
1657	tristate "UML watchdog"
1658	depends on UML
1659
1660#
1661# ISA-based Watchdog Cards
1662#
1663
1664comment "ISA-based Watchdog Cards"
1665	depends on ISA
1666
1667config PCWATCHDOG
1668	tristate "Berkshire Products ISA-PC Watchdog"
1669	depends on ISA
1670	---help---
1671	  This is the driver for the Berkshire Products ISA-PC Watchdog card.
1672	  This card simply watches your kernel to make sure it doesn't freeze,
1673	  and if it does, it reboots your computer after a certain amount of
1674	  time. This driver is like the WDT501 driver but for different
1675	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
1676	  watchdog cards can be ordered from <http://www.berkprod.com/>.
1677
1678	  To compile this driver as a module, choose M here: the
1679	  module will be called pcwd.
1680
1681	  Most people will say N.
1682
1683config MIXCOMWD
1684	tristate "Mixcom Watchdog"
1685	depends on ISA
1686	---help---
1687	  This is a driver for the Mixcom hardware watchdog cards.  This
1688	  watchdog simply watches your kernel to make sure it doesn't freeze,
1689	  and if it does, it reboots your computer after a certain amount of
1690	  time.
1691
1692	  To compile this driver as a module, choose M here: the
1693	  module will be called mixcomwd.
1694
1695	  Most people will say N.
1696
1697config WDT
1698	tristate "WDT Watchdog timer"
1699	depends on ISA
1700	---help---
1701	  If you have a WDT500P or WDT501P watchdog board, say Y here,
1702	  otherwise N. It is not possible to probe for this board, which means
1703	  that you have to inform the kernel about the IO port and IRQ that
1704	  is needed (you can do this via the io and irq parameters)
1705
1706	  To compile this driver as a module, choose M here: the
1707	  module will be called wdt.
1708
1709#
1710# PCI-based Watchdog Cards
1711#
1712
1713comment "PCI-based Watchdog Cards"
1714	depends on PCI
1715
1716config PCIPCWATCHDOG
1717	tristate "Berkshire Products PCI-PC Watchdog"
1718	depends on PCI
1719	---help---
1720	  This is the driver for the Berkshire Products PCI-PC Watchdog card.
1721	  This card simply watches your kernel to make sure it doesn't freeze,
1722	  and if it does, it reboots your computer after a certain amount of
1723	  time. The card can also monitor the internal temperature of the PC.
1724	  More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
1725
1726	  To compile this driver as a module, choose M here: the
1727	  module will be called pcwd_pci.
1728
1729	  Most people will say N.
1730
1731config WDTPCI
1732	tristate "PCI-WDT500/501 Watchdog timer"
1733	depends on PCI
1734	---help---
1735	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
1736
1737	  If you have a PCI-WDT501 watchdog board then you can enable the
1738	  temperature sensor by setting the type parameter to 501.
1739
1740	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
1741	  can do this via the tachometer parameter. Only do this if you have a
1742	  fan tachometer actually set up.
1743
1744	  To compile this driver as a module, choose M here: the
1745	  module will be called wdt_pci.
1746
1747#
1748# USB-based Watchdog Cards
1749#
1750
1751comment "USB-based Watchdog Cards"
1752	depends on USB
1753
1754config USBPCWATCHDOG
1755	tristate "Berkshire Products USB-PC Watchdog"
1756	depends on USB
1757	---help---
1758	  This is the driver for the Berkshire Products USB-PC Watchdog card.
1759	  This card simply watches your kernel to make sure it doesn't freeze,
1760	  and if it does, it reboots your computer after a certain amount of
1761	  time. The card can also monitor the internal temperature of the PC.
1762	  More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
1763
1764	  To compile this driver as a module, choose M here: the
1765	  module will be called pcwd_usb.
1766
1767	  Most people will say N.
1768
1769endif # WATCHDOG