Loading...
1/*
2 * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
3 *
4 * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
5 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
6 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2003 IBM Corp.
8 *
9 * Many thanks to the authors of pl2303 driver: all functions in this file
10 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
11 *
12 * Warning! You use this driver on your own risk! The only official
13 * description of this device I have is datasheet from manufacturer,
14 * and it doesn't contain almost any information needed to write a driver.
15 * Almost all knowlegde used while writing this driver was gathered by:
16 * - analyzing traffic between device and the M$ Windows 2000 driver,
17 * - trying different bit combinations and checking pin states
18 * with a voltmeter,
19 * - receiving malformed frames and producing buffer overflows
20 * to learn how errors are reported,
21 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
22 * CONNECTED TO IT!
23 *
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2 of the License.
27 *
28 * See Documentation/usb/usb-serial.txt for more information on using this
29 * driver
30 *
31 * TODO:
32 * - implement correct flushing for ioctls and oti6858_close()
33 * - check how errors (rx overflow, parity error, framing error) are reported
34 * - implement oti6858_break_ctl()
35 * - implement more ioctls
36 * - test/implement flow control
37 * - allow setting custom baud rates
38 */
39
40#include <linux/kernel.h>
41#include <linux/errno.h>
42#include <linux/init.h>
43#include <linux/slab.h>
44#include <linux/tty.h>
45#include <linux/tty_driver.h>
46#include <linux/tty_flip.h>
47#include <linux/serial.h>
48#include <linux/module.h>
49#include <linux/moduleparam.h>
50#include <linux/spinlock.h>
51#include <linux/usb.h>
52#include <linux/usb/serial.h>
53#include <linux/uaccess.h>
54#include <linux/kfifo.h>
55#include "oti6858.h"
56
57#define OTI6858_DESCRIPTION \
58 "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
59#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
60#define OTI6858_VERSION "0.2"
61
62static const struct usb_device_id id_table[] = {
63 { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
64 { }
65};
66
67MODULE_DEVICE_TABLE(usb, id_table);
68
69static struct usb_driver oti6858_driver = {
70 .name = "oti6858",
71 .probe = usb_serial_probe,
72 .disconnect = usb_serial_disconnect,
73 .id_table = id_table,
74 .no_dynamic_id = 1,
75};
76
77static int debug;
78
79/* requests */
80#define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
81#define OTI6858_REQ_T_GET_STATUS 0x01
82
83#define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
84#define OTI6858_REQ_T_SET_LINE 0x00
85
86#define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
87#define OTI6858_REQ_T_CHECK_TXBUFF 0x00
88
89/* format of the control packet */
90struct oti6858_control_pkt {
91 __le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */
92#define OTI6858_MAX_BAUD_RATE 3000000
93 u8 frame_fmt;
94#define FMT_STOP_BITS_MASK 0xc0
95#define FMT_STOP_BITS_1 0x00
96#define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */
97#define FMT_PARITY_MASK 0x38
98#define FMT_PARITY_NONE 0x00
99#define FMT_PARITY_ODD 0x08
100#define FMT_PARITY_EVEN 0x18
101#define FMT_PARITY_MARK 0x28
102#define FMT_PARITY_SPACE 0x38
103#define FMT_DATA_BITS_MASK 0x03
104#define FMT_DATA_BITS_5 0x00
105#define FMT_DATA_BITS_6 0x01
106#define FMT_DATA_BITS_7 0x02
107#define FMT_DATA_BITS_8 0x03
108 u8 something; /* always equals 0x43 */
109 u8 control; /* settings of flow control lines */
110#define CONTROL_MASK 0x0c
111#define CONTROL_DTR_HIGH 0x08
112#define CONTROL_RTS_HIGH 0x04
113 u8 tx_status;
114#define TX_BUFFER_EMPTIED 0x09
115 u8 pin_state;
116#define PIN_MASK 0x3f
117#define PIN_RTS 0x20 /* output pin */
118#define PIN_CTS 0x10 /* input pin, active low */
119#define PIN_DSR 0x08 /* input pin, active low */
120#define PIN_DTR 0x04 /* output pin */
121#define PIN_RI 0x02 /* input pin, active low */
122#define PIN_DCD 0x01 /* input pin, active low */
123 u8 rx_bytes_avail; /* number of bytes in rx buffer */;
124};
125
126#define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt)
127#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
128 (((a)->divisor == (priv)->pending_setup.divisor) \
129 && ((a)->control == (priv)->pending_setup.control) \
130 && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
131
132/* function prototypes */
133static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
134static void oti6858_close(struct usb_serial_port *port);
135static void oti6858_set_termios(struct tty_struct *tty,
136 struct usb_serial_port *port, struct ktermios *old);
137static void oti6858_init_termios(struct tty_struct *tty);
138static int oti6858_ioctl(struct tty_struct *tty,
139 unsigned int cmd, unsigned long arg);
140static void oti6858_read_int_callback(struct urb *urb);
141static void oti6858_read_bulk_callback(struct urb *urb);
142static void oti6858_write_bulk_callback(struct urb *urb);
143static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
144 const unsigned char *buf, int count);
145static int oti6858_write_room(struct tty_struct *tty);
146static int oti6858_chars_in_buffer(struct tty_struct *tty);
147static int oti6858_tiocmget(struct tty_struct *tty);
148static int oti6858_tiocmset(struct tty_struct *tty,
149 unsigned int set, unsigned int clear);
150static int oti6858_startup(struct usb_serial *serial);
151static void oti6858_release(struct usb_serial *serial);
152
153/* device info */
154static struct usb_serial_driver oti6858_device = {
155 .driver = {
156 .owner = THIS_MODULE,
157 .name = "oti6858",
158 },
159 .id_table = id_table,
160 .usb_driver = &oti6858_driver,
161 .num_ports = 1,
162 .open = oti6858_open,
163 .close = oti6858_close,
164 .write = oti6858_write,
165 .ioctl = oti6858_ioctl,
166 .set_termios = oti6858_set_termios,
167 .init_termios = oti6858_init_termios,
168 .tiocmget = oti6858_tiocmget,
169 .tiocmset = oti6858_tiocmset,
170 .read_bulk_callback = oti6858_read_bulk_callback,
171 .read_int_callback = oti6858_read_int_callback,
172 .write_bulk_callback = oti6858_write_bulk_callback,
173 .write_room = oti6858_write_room,
174 .chars_in_buffer = oti6858_chars_in_buffer,
175 .attach = oti6858_startup,
176 .release = oti6858_release,
177};
178
179struct oti6858_private {
180 spinlock_t lock;
181
182 struct oti6858_control_pkt status;
183
184 struct {
185 u8 read_urb_in_use;
186 u8 write_urb_in_use;
187 } flags;
188 struct delayed_work delayed_write_work;
189
190 struct {
191 __le16 divisor;
192 u8 frame_fmt;
193 u8 control;
194 } pending_setup;
195 u8 transient;
196 u8 setup_done;
197 struct delayed_work delayed_setup_work;
198
199 wait_queue_head_t intr_wait;
200 struct usb_serial_port *port; /* USB port with which associated */
201};
202
203static void setup_line(struct work_struct *work)
204{
205 struct oti6858_private *priv = container_of(work,
206 struct oti6858_private, delayed_setup_work.work);
207 struct usb_serial_port *port = priv->port;
208 struct oti6858_control_pkt *new_setup;
209 unsigned long flags;
210 int result;
211
212 dbg("%s(port = %d)", __func__, port->number);
213
214 new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
215 if (new_setup == NULL) {
216 dev_err(&port->dev, "%s(): out of memory!\n", __func__);
217 /* we will try again */
218 schedule_delayed_work(&priv->delayed_setup_work,
219 msecs_to_jiffies(2));
220 return;
221 }
222
223 result = usb_control_msg(port->serial->dev,
224 usb_rcvctrlpipe(port->serial->dev, 0),
225 OTI6858_REQ_T_GET_STATUS,
226 OTI6858_REQ_GET_STATUS,
227 0, 0,
228 new_setup, OTI6858_CTRL_PKT_SIZE,
229 100);
230
231 if (result != OTI6858_CTRL_PKT_SIZE) {
232 dev_err(&port->dev, "%s(): error reading status\n", __func__);
233 kfree(new_setup);
234 /* we will try again */
235 schedule_delayed_work(&priv->delayed_setup_work,
236 msecs_to_jiffies(2));
237 return;
238 }
239
240 spin_lock_irqsave(&priv->lock, flags);
241 if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
242 new_setup->divisor = priv->pending_setup.divisor;
243 new_setup->control = priv->pending_setup.control;
244 new_setup->frame_fmt = priv->pending_setup.frame_fmt;
245
246 spin_unlock_irqrestore(&priv->lock, flags);
247 result = usb_control_msg(port->serial->dev,
248 usb_sndctrlpipe(port->serial->dev, 0),
249 OTI6858_REQ_T_SET_LINE,
250 OTI6858_REQ_SET_LINE,
251 0, 0,
252 new_setup, OTI6858_CTRL_PKT_SIZE,
253 100);
254 } else {
255 spin_unlock_irqrestore(&priv->lock, flags);
256 result = 0;
257 }
258 kfree(new_setup);
259
260 spin_lock_irqsave(&priv->lock, flags);
261 if (result != OTI6858_CTRL_PKT_SIZE)
262 priv->transient = 0;
263 priv->setup_done = 1;
264 spin_unlock_irqrestore(&priv->lock, flags);
265
266 dbg("%s(): submitting interrupt urb", __func__);
267 port->interrupt_in_urb->dev = port->serial->dev;
268 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
269 if (result != 0) {
270 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
271 " with error %d\n", __func__, result);
272 }
273}
274
275static void send_data(struct work_struct *work)
276{
277 struct oti6858_private *priv = container_of(work,
278 struct oti6858_private, delayed_write_work.work);
279 struct usb_serial_port *port = priv->port;
280 int count = 0, result;
281 unsigned long flags;
282 u8 *allow;
283
284 dbg("%s(port = %d)", __func__, port->number);
285
286 spin_lock_irqsave(&priv->lock, flags);
287 if (priv->flags.write_urb_in_use) {
288 spin_unlock_irqrestore(&priv->lock, flags);
289 schedule_delayed_work(&priv->delayed_write_work,
290 msecs_to_jiffies(2));
291 return;
292 }
293 priv->flags.write_urb_in_use = 1;
294 spin_unlock_irqrestore(&priv->lock, flags);
295
296 spin_lock_irqsave(&port->lock, flags);
297 count = kfifo_len(&port->write_fifo);
298 spin_unlock_irqrestore(&port->lock, flags);
299
300 if (count > port->bulk_out_size)
301 count = port->bulk_out_size;
302
303 if (count != 0) {
304 allow = kmalloc(1, GFP_KERNEL);
305 if (!allow) {
306 dev_err(&port->dev, "%s(): kmalloc failed\n",
307 __func__);
308 return;
309 }
310 result = usb_control_msg(port->serial->dev,
311 usb_rcvctrlpipe(port->serial->dev, 0),
312 OTI6858_REQ_T_CHECK_TXBUFF,
313 OTI6858_REQ_CHECK_TXBUFF,
314 count, 0, allow, 1, 100);
315 if (result != 1 || *allow != 0)
316 count = 0;
317 kfree(allow);
318 }
319
320 if (count == 0) {
321 priv->flags.write_urb_in_use = 0;
322
323 dbg("%s(): submitting interrupt urb", __func__);
324 port->interrupt_in_urb->dev = port->serial->dev;
325 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
326 if (result != 0) {
327 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
328 " with error %d\n", __func__, result);
329 }
330 return;
331 }
332
333 count = kfifo_out_locked(&port->write_fifo,
334 port->write_urb->transfer_buffer,
335 count, &port->lock);
336 port->write_urb->transfer_buffer_length = count;
337 port->write_urb->dev = port->serial->dev;
338 result = usb_submit_urb(port->write_urb, GFP_NOIO);
339 if (result != 0) {
340 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
341 " with error %d\n", __func__, result);
342 priv->flags.write_urb_in_use = 0;
343 }
344
345 usb_serial_port_softint(port);
346}
347
348static int oti6858_startup(struct usb_serial *serial)
349{
350 struct usb_serial_port *port = serial->port[0];
351 struct oti6858_private *priv;
352 int i;
353
354 for (i = 0; i < serial->num_ports; ++i) {
355 priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
356 if (!priv)
357 break;
358
359 spin_lock_init(&priv->lock);
360 init_waitqueue_head(&priv->intr_wait);
361/* INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
362/* INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
363 priv->port = port;
364 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
365 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
366
367 usb_set_serial_port_data(serial->port[i], priv);
368 }
369 if (i == serial->num_ports)
370 return 0;
371
372 for (--i; i >= 0; --i) {
373 priv = usb_get_serial_port_data(serial->port[i]);
374 kfree(priv);
375 usb_set_serial_port_data(serial->port[i], NULL);
376 }
377 return -ENOMEM;
378}
379
380static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
381 const unsigned char *buf, int count)
382{
383 dbg("%s(port = %d, count = %d)", __func__, port->number, count);
384
385 if (!count)
386 return count;
387
388 count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
389
390 return count;
391}
392
393static int oti6858_write_room(struct tty_struct *tty)
394{
395 struct usb_serial_port *port = tty->driver_data;
396 int room = 0;
397 unsigned long flags;
398
399 dbg("%s(port = %d)", __func__, port->number);
400
401 spin_lock_irqsave(&port->lock, flags);
402 room = kfifo_avail(&port->write_fifo);
403 spin_unlock_irqrestore(&port->lock, flags);
404
405 return room;
406}
407
408static int oti6858_chars_in_buffer(struct tty_struct *tty)
409{
410 struct usb_serial_port *port = tty->driver_data;
411 int chars = 0;
412 unsigned long flags;
413
414 dbg("%s(port = %d)", __func__, port->number);
415
416 spin_lock_irqsave(&port->lock, flags);
417 chars = kfifo_len(&port->write_fifo);
418 spin_unlock_irqrestore(&port->lock, flags);
419
420 return chars;
421}
422
423static void oti6858_init_termios(struct tty_struct *tty)
424{
425 *(tty->termios) = tty_std_termios;
426 tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
427 tty->termios->c_ispeed = 38400;
428 tty->termios->c_ospeed = 38400;
429}
430
431static void oti6858_set_termios(struct tty_struct *tty,
432 struct usb_serial_port *port, struct ktermios *old_termios)
433{
434 struct oti6858_private *priv = usb_get_serial_port_data(port);
435 unsigned long flags;
436 unsigned int cflag;
437 u8 frame_fmt, control;
438 __le16 divisor;
439 int br;
440
441 dbg("%s(port = %d)", __func__, port->number);
442
443 if (!tty) {
444 dbg("%s(): no tty structures", __func__);
445 return;
446 }
447
448 cflag = tty->termios->c_cflag;
449
450 spin_lock_irqsave(&priv->lock, flags);
451 divisor = priv->pending_setup.divisor;
452 frame_fmt = priv->pending_setup.frame_fmt;
453 control = priv->pending_setup.control;
454 spin_unlock_irqrestore(&priv->lock, flags);
455
456 frame_fmt &= ~FMT_DATA_BITS_MASK;
457 switch (cflag & CSIZE) {
458 case CS5:
459 frame_fmt |= FMT_DATA_BITS_5;
460 break;
461 case CS6:
462 frame_fmt |= FMT_DATA_BITS_6;
463 break;
464 case CS7:
465 frame_fmt |= FMT_DATA_BITS_7;
466 break;
467 default:
468 case CS8:
469 frame_fmt |= FMT_DATA_BITS_8;
470 break;
471 }
472
473 /* manufacturer claims that this device can work with baud rates
474 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
475 * guarantee that any other baud rate will work (especially
476 * the higher ones)
477 */
478 br = tty_get_baud_rate(tty);
479 if (br == 0) {
480 divisor = 0;
481 } else {
482 int real_br;
483 int new_divisor;
484 br = min(br, OTI6858_MAX_BAUD_RATE);
485
486 new_divisor = (96000000 + 8 * br) / (16 * br);
487 real_br = 96000000 / (16 * new_divisor);
488 divisor = cpu_to_le16(new_divisor);
489 tty_encode_baud_rate(tty, real_br, real_br);
490 }
491
492 frame_fmt &= ~FMT_STOP_BITS_MASK;
493 if ((cflag & CSTOPB) != 0)
494 frame_fmt |= FMT_STOP_BITS_2;
495 else
496 frame_fmt |= FMT_STOP_BITS_1;
497
498 frame_fmt &= ~FMT_PARITY_MASK;
499 if ((cflag & PARENB) != 0) {
500 if ((cflag & PARODD) != 0)
501 frame_fmt |= FMT_PARITY_ODD;
502 else
503 frame_fmt |= FMT_PARITY_EVEN;
504 } else {
505 frame_fmt |= FMT_PARITY_NONE;
506 }
507
508 control &= ~CONTROL_MASK;
509 if ((cflag & CRTSCTS) != 0)
510 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
511
512 /* change control lines if we are switching to or from B0 */
513 /* FIXME:
514 spin_lock_irqsave(&priv->lock, flags);
515 control = priv->line_control;
516 if ((cflag & CBAUD) == B0)
517 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
518 else
519 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
520 if (control != priv->line_control) {
521 control = priv->line_control;
522 spin_unlock_irqrestore(&priv->lock, flags);
523 set_control_lines(serial->dev, control);
524 } else {
525 spin_unlock_irqrestore(&priv->lock, flags);
526 }
527 */
528
529 spin_lock_irqsave(&priv->lock, flags);
530 if (divisor != priv->pending_setup.divisor
531 || control != priv->pending_setup.control
532 || frame_fmt != priv->pending_setup.frame_fmt) {
533 priv->pending_setup.divisor = divisor;
534 priv->pending_setup.control = control;
535 priv->pending_setup.frame_fmt = frame_fmt;
536 }
537 spin_unlock_irqrestore(&priv->lock, flags);
538}
539
540static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
541{
542 struct oti6858_private *priv = usb_get_serial_port_data(port);
543 struct ktermios tmp_termios;
544 struct usb_serial *serial = port->serial;
545 struct oti6858_control_pkt *buf;
546 unsigned long flags;
547 int result;
548
549 dbg("%s(port = %d)", __func__, port->number);
550
551 usb_clear_halt(serial->dev, port->write_urb->pipe);
552 usb_clear_halt(serial->dev, port->read_urb->pipe);
553
554 buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
555 if (buf == NULL) {
556 dev_err(&port->dev, "%s(): out of memory!\n", __func__);
557 return -ENOMEM;
558 }
559
560 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
561 OTI6858_REQ_T_GET_STATUS,
562 OTI6858_REQ_GET_STATUS,
563 0, 0,
564 buf, OTI6858_CTRL_PKT_SIZE,
565 100);
566 if (result != OTI6858_CTRL_PKT_SIZE) {
567 /* assume default (after power-on reset) values */
568 buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */
569 buf->frame_fmt = 0x03; /* 8N1 */
570 buf->something = 0x43;
571 buf->control = 0x4c; /* DTR, RTS */
572 buf->tx_status = 0x00;
573 buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */
574 buf->rx_bytes_avail = 0x00;
575 }
576
577 spin_lock_irqsave(&priv->lock, flags);
578 memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
579 priv->pending_setup.divisor = buf->divisor;
580 priv->pending_setup.frame_fmt = buf->frame_fmt;
581 priv->pending_setup.control = buf->control;
582 spin_unlock_irqrestore(&priv->lock, flags);
583 kfree(buf);
584
585 dbg("%s(): submitting interrupt urb", __func__);
586 port->interrupt_in_urb->dev = serial->dev;
587 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
588 if (result != 0) {
589 dev_err(&port->dev, "%s(): usb_submit_urb() failed"
590 " with error %d\n", __func__, result);
591 oti6858_close(port);
592 return -EPROTO;
593 }
594
595 /* setup termios */
596 if (tty)
597 oti6858_set_termios(tty, port, &tmp_termios);
598 port->port.drain_delay = 256; /* FIXME: check the FIFO length */
599 return 0;
600}
601
602static void oti6858_close(struct usb_serial_port *port)
603{
604 struct oti6858_private *priv = usb_get_serial_port_data(port);
605 unsigned long flags;
606
607 dbg("%s(port = %d)", __func__, port->number);
608
609 spin_lock_irqsave(&port->lock, flags);
610 /* clear out any remaining data in the buffer */
611 kfifo_reset_out(&port->write_fifo);
612 spin_unlock_irqrestore(&port->lock, flags);
613
614 dbg("%s(): after buf_clear()", __func__);
615
616 /* cancel scheduled setup */
617 cancel_delayed_work_sync(&priv->delayed_setup_work);
618 cancel_delayed_work_sync(&priv->delayed_write_work);
619
620 /* shutdown our urbs */
621 dbg("%s(): shutting down urbs", __func__);
622 usb_kill_urb(port->write_urb);
623 usb_kill_urb(port->read_urb);
624 usb_kill_urb(port->interrupt_in_urb);
625}
626
627static int oti6858_tiocmset(struct tty_struct *tty,
628 unsigned int set, unsigned int clear)
629{
630 struct usb_serial_port *port = tty->driver_data;
631 struct oti6858_private *priv = usb_get_serial_port_data(port);
632 unsigned long flags;
633 u8 control;
634
635 dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
636 __func__, port->number, set, clear);
637
638 if (!usb_get_intfdata(port->serial->interface))
639 return -ENODEV;
640
641 /* FIXME: check if this is correct (active high/low) */
642 spin_lock_irqsave(&priv->lock, flags);
643 control = priv->pending_setup.control;
644 if ((set & TIOCM_RTS) != 0)
645 control |= CONTROL_RTS_HIGH;
646 if ((set & TIOCM_DTR) != 0)
647 control |= CONTROL_DTR_HIGH;
648 if ((clear & TIOCM_RTS) != 0)
649 control &= ~CONTROL_RTS_HIGH;
650 if ((clear & TIOCM_DTR) != 0)
651 control &= ~CONTROL_DTR_HIGH;
652
653 if (control != priv->pending_setup.control)
654 priv->pending_setup.control = control;
655
656 spin_unlock_irqrestore(&priv->lock, flags);
657 return 0;
658}
659
660static int oti6858_tiocmget(struct tty_struct *tty)
661{
662 struct usb_serial_port *port = tty->driver_data;
663 struct oti6858_private *priv = usb_get_serial_port_data(port);
664 unsigned long flags;
665 unsigned pin_state;
666 unsigned result = 0;
667
668 dbg("%s(port = %d)", __func__, port->number);
669
670 if (!usb_get_intfdata(port->serial->interface))
671 return -ENODEV;
672
673 spin_lock_irqsave(&priv->lock, flags);
674 pin_state = priv->status.pin_state & PIN_MASK;
675 spin_unlock_irqrestore(&priv->lock, flags);
676
677 /* FIXME: check if this is correct (active high/low) */
678 if ((pin_state & PIN_RTS) != 0)
679 result |= TIOCM_RTS;
680 if ((pin_state & PIN_CTS) != 0)
681 result |= TIOCM_CTS;
682 if ((pin_state & PIN_DSR) != 0)
683 result |= TIOCM_DSR;
684 if ((pin_state & PIN_DTR) != 0)
685 result |= TIOCM_DTR;
686 if ((pin_state & PIN_RI) != 0)
687 result |= TIOCM_RI;
688 if ((pin_state & PIN_DCD) != 0)
689 result |= TIOCM_CD;
690
691 dbg("%s() = 0x%08x", __func__, result);
692
693 return result;
694}
695
696static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
697{
698 struct oti6858_private *priv = usb_get_serial_port_data(port);
699 unsigned long flags;
700 unsigned int prev, status;
701 unsigned int changed;
702
703 spin_lock_irqsave(&priv->lock, flags);
704 prev = priv->status.pin_state;
705 spin_unlock_irqrestore(&priv->lock, flags);
706
707 while (1) {
708 wait_event_interruptible(priv->intr_wait,
709 priv->status.pin_state != prev);
710 if (signal_pending(current))
711 return -ERESTARTSYS;
712
713 spin_lock_irqsave(&priv->lock, flags);
714 status = priv->status.pin_state & PIN_MASK;
715 spin_unlock_irqrestore(&priv->lock, flags);
716
717 changed = prev ^ status;
718 /* FIXME: check if this is correct (active high/low) */
719 if (((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
720 ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
721 ((arg & TIOCM_CD) && (changed & PIN_DCD)) ||
722 ((arg & TIOCM_CTS) && (changed & PIN_CTS)))
723 return 0;
724 prev = status;
725 }
726
727 /* NOTREACHED */
728 return 0;
729}
730
731static int oti6858_ioctl(struct tty_struct *tty,
732 unsigned int cmd, unsigned long arg)
733{
734 struct usb_serial_port *port = tty->driver_data;
735
736 dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
737 __func__, port->number, cmd, arg);
738
739 switch (cmd) {
740 case TIOCMIWAIT:
741 dbg("%s(): TIOCMIWAIT", __func__);
742 return wait_modem_info(port, arg);
743 default:
744 dbg("%s(): 0x%04x not supported", __func__, cmd);
745 break;
746 }
747 return -ENOIOCTLCMD;
748}
749
750
751static void oti6858_release(struct usb_serial *serial)
752{
753 int i;
754
755 dbg("%s()", __func__);
756
757 for (i = 0; i < serial->num_ports; ++i)
758 kfree(usb_get_serial_port_data(serial->port[i]));
759}
760
761static void oti6858_read_int_callback(struct urb *urb)
762{
763 struct usb_serial_port *port = urb->context;
764 struct oti6858_private *priv = usb_get_serial_port_data(port);
765 int transient = 0, can_recv = 0, resubmit = 1;
766 int status = urb->status;
767
768 dbg("%s(port = %d, status = %d)",
769 __func__, port->number, status);
770
771 switch (status) {
772 case 0:
773 /* success */
774 break;
775 case -ECONNRESET:
776 case -ENOENT:
777 case -ESHUTDOWN:
778 /* this urb is terminated, clean up */
779 dbg("%s(): urb shutting down with status: %d",
780 __func__, status);
781 return;
782 default:
783 dbg("%s(): nonzero urb status received: %d",
784 __func__, status);
785 break;
786 }
787
788 if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
789 struct oti6858_control_pkt *xs = urb->transfer_buffer;
790 unsigned long flags;
791
792 spin_lock_irqsave(&priv->lock, flags);
793
794 if (!priv->transient) {
795 if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
796 if (xs->rx_bytes_avail == 0) {
797 priv->transient = 4;
798 priv->setup_done = 0;
799 resubmit = 0;
800 dbg("%s(): scheduling setup_line()",
801 __func__);
802 schedule_delayed_work(&priv->delayed_setup_work, 0);
803 }
804 }
805 } else {
806 if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
807 priv->transient = 0;
808 } else if (!priv->setup_done) {
809 resubmit = 0;
810 } else if (--priv->transient == 0) {
811 if (xs->rx_bytes_avail == 0) {
812 priv->transient = 4;
813 priv->setup_done = 0;
814 resubmit = 0;
815 dbg("%s(): scheduling setup_line()",
816 __func__);
817 schedule_delayed_work(&priv->delayed_setup_work, 0);
818 }
819 }
820 }
821
822 if (!priv->transient) {
823 if (xs->pin_state != priv->status.pin_state)
824 wake_up_interruptible(&priv->intr_wait);
825 memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
826 }
827
828 if (!priv->transient && xs->rx_bytes_avail != 0) {
829 can_recv = xs->rx_bytes_avail;
830 priv->flags.read_urb_in_use = 1;
831 }
832
833 transient = priv->transient;
834 spin_unlock_irqrestore(&priv->lock, flags);
835 }
836
837 if (can_recv) {
838 int result;
839
840 port->read_urb->dev = port->serial->dev;
841 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
842 if (result != 0) {
843 priv->flags.read_urb_in_use = 0;
844 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
845 " error %d\n", __func__, result);
846 } else {
847 resubmit = 0;
848 }
849 } else if (!transient) {
850 unsigned long flags;
851 int count;
852
853 spin_lock_irqsave(&port->lock, flags);
854 count = kfifo_len(&port->write_fifo);
855 spin_unlock_irqrestore(&port->lock, flags);
856
857 spin_lock_irqsave(&priv->lock, flags);
858 if (priv->flags.write_urb_in_use == 0 && count != 0) {
859 schedule_delayed_work(&priv->delayed_write_work, 0);
860 resubmit = 0;
861 }
862 spin_unlock_irqrestore(&priv->lock, flags);
863 }
864
865 if (resubmit) {
866 int result;
867
868/* dbg("%s(): submitting interrupt urb", __func__); */
869 urb->dev = port->serial->dev;
870 result = usb_submit_urb(urb, GFP_ATOMIC);
871 if (result != 0) {
872 dev_err(&urb->dev->dev,
873 "%s(): usb_submit_urb() failed with"
874 " error %d\n", __func__, result);
875 }
876 }
877}
878
879static void oti6858_read_bulk_callback(struct urb *urb)
880{
881 struct usb_serial_port *port = urb->context;
882 struct oti6858_private *priv = usb_get_serial_port_data(port);
883 struct tty_struct *tty;
884 unsigned char *data = urb->transfer_buffer;
885 unsigned long flags;
886 int status = urb->status;
887 int result;
888
889 dbg("%s(port = %d, status = %d)",
890 __func__, port->number, status);
891
892 spin_lock_irqsave(&priv->lock, flags);
893 priv->flags.read_urb_in_use = 0;
894 spin_unlock_irqrestore(&priv->lock, flags);
895
896 if (status != 0) {
897 /*
898 if (status == -EPROTO) {
899 * PL2303 mysteriously fails with -EPROTO reschedule
900 the read *
901 dbg("%s - caught -EPROTO, resubmitting the urb",
902 __func__);
903 result = usb_submit_urb(urb, GFP_ATOMIC);
904 if (result)
905 dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
906 return;
907 }
908 */
909 dbg("%s(): unable to handle the error, exiting", __func__);
910 return;
911 }
912
913 tty = tty_port_tty_get(&port->port);
914 if (tty != NULL && urb->actual_length > 0) {
915 tty_insert_flip_string(tty, data, urb->actual_length);
916 tty_flip_buffer_push(tty);
917 }
918 tty_kref_put(tty);
919
920 /* schedule the interrupt urb */
921 port->interrupt_in_urb->dev = port->serial->dev;
922 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
923 if (result != 0 && result != -EPERM) {
924 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
925 " error %d\n", __func__, result);
926 }
927}
928
929static void oti6858_write_bulk_callback(struct urb *urb)
930{
931 struct usb_serial_port *port = urb->context;
932 struct oti6858_private *priv = usb_get_serial_port_data(port);
933 int status = urb->status;
934 int result;
935
936 dbg("%s(port = %d, status = %d)",
937 __func__, port->number, status);
938
939 switch (status) {
940 case 0:
941 /* success */
942 break;
943 case -ECONNRESET:
944 case -ENOENT:
945 case -ESHUTDOWN:
946 /* this urb is terminated, clean up */
947 dbg("%s(): urb shutting down with status: %d",
948 __func__, status);
949 priv->flags.write_urb_in_use = 0;
950 return;
951 default:
952 /* error in the urb, so we have to resubmit it */
953 dbg("%s(): nonzero write bulk status received: %d",
954 __func__, status);
955 dbg("%s(): overflow in write", __func__);
956
957 port->write_urb->transfer_buffer_length = 1;
958 port->write_urb->dev = port->serial->dev;
959 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
960 if (result) {
961 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
962 " error %d\n", __func__, result);
963 } else {
964 return;
965 }
966 }
967
968 priv->flags.write_urb_in_use = 0;
969
970 /* schedule the interrupt urb if we are still open */
971 port->interrupt_in_urb->dev = port->serial->dev;
972 dbg("%s(): submitting interrupt urb", __func__);
973 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
974 if (result != 0) {
975 dev_err(&port->dev, "%s(): failed submitting int urb,"
976 " error %d\n", __func__, result);
977 }
978}
979
980/* module description and (de)initialization */
981
982static int __init oti6858_init(void)
983{
984 int retval;
985
986 retval = usb_serial_register(&oti6858_device);
987 if (retval == 0) {
988 retval = usb_register(&oti6858_driver);
989 if (retval)
990 usb_serial_deregister(&oti6858_device);
991 }
992 return retval;
993}
994
995static void __exit oti6858_exit(void)
996{
997 usb_deregister(&oti6858_driver);
998 usb_serial_deregister(&oti6858_device);
999}
1000
1001module_init(oti6858_init);
1002module_exit(oti6858_exit);
1003
1004MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
1005MODULE_AUTHOR(OTI6858_AUTHOR);
1006MODULE_VERSION(OTI6858_VERSION);
1007MODULE_LICENSE("GPL");
1008
1009module_param(debug, bool, S_IRUGO | S_IWUSR);
1010MODULE_PARM_DESC(debug, "enable debug output");
1011
1/*
2 * Ours Technology Inc. OTi-6858 USB to serial adapter driver.
3 *
4 * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20)
5 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail)
6 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2003 IBM Corp.
8 *
9 * Many thanks to the authors of pl2303 driver: all functions in this file
10 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy.
11 *
12 * Warning! You use this driver on your own risk! The only official
13 * description of this device I have is datasheet from manufacturer,
14 * and it doesn't contain almost any information needed to write a driver.
15 * Almost all knowlegde used while writing this driver was gathered by:
16 * - analyzing traffic between device and the M$ Windows 2000 driver,
17 * - trying different bit combinations and checking pin states
18 * with a voltmeter,
19 * - receiving malformed frames and producing buffer overflows
20 * to learn how errors are reported,
21 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE
22 * CONNECTED TO IT!
23 *
24 * This program is free software; you can redistribute it and/or modify
25 * it under the terms of the GNU General Public License as published by
26 * the Free Software Foundation; either version 2 of the License.
27 *
28 * See Documentation/usb/usb-serial.txt for more information on using this
29 * driver
30 *
31 * TODO:
32 * - implement correct flushing for ioctls and oti6858_close()
33 * - check how errors (rx overflow, parity error, framing error) are reported
34 * - implement oti6858_break_ctl()
35 * - implement more ioctls
36 * - test/implement flow control
37 * - allow setting custom baud rates
38 */
39
40#include <linux/kernel.h>
41#include <linux/errno.h>
42#include <linux/slab.h>
43#include <linux/tty.h>
44#include <linux/tty_driver.h>
45#include <linux/tty_flip.h>
46#include <linux/serial.h>
47#include <linux/module.h>
48#include <linux/moduleparam.h>
49#include <linux/spinlock.h>
50#include <linux/usb.h>
51#include <linux/usb/serial.h>
52#include <linux/uaccess.h>
53#include <linux/kfifo.h>
54#include "oti6858.h"
55
56#define OTI6858_DESCRIPTION \
57 "Ours Technology Inc. OTi-6858 USB to serial adapter driver"
58#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
59
60static const struct usb_device_id id_table[] = {
61 { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
62 { }
63};
64
65MODULE_DEVICE_TABLE(usb, id_table);
66
67/* requests */
68#define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
69#define OTI6858_REQ_T_GET_STATUS 0x01
70
71#define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00)
72#define OTI6858_REQ_T_SET_LINE 0x00
73
74#define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01)
75#define OTI6858_REQ_T_CHECK_TXBUFF 0x00
76
77/* format of the control packet */
78struct oti6858_control_pkt {
79 __le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */
80#define OTI6858_MAX_BAUD_RATE 3000000
81 u8 frame_fmt;
82#define FMT_STOP_BITS_MASK 0xc0
83#define FMT_STOP_BITS_1 0x00
84#define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */
85#define FMT_PARITY_MASK 0x38
86#define FMT_PARITY_NONE 0x00
87#define FMT_PARITY_ODD 0x08
88#define FMT_PARITY_EVEN 0x18
89#define FMT_PARITY_MARK 0x28
90#define FMT_PARITY_SPACE 0x38
91#define FMT_DATA_BITS_MASK 0x03
92#define FMT_DATA_BITS_5 0x00
93#define FMT_DATA_BITS_6 0x01
94#define FMT_DATA_BITS_7 0x02
95#define FMT_DATA_BITS_8 0x03
96 u8 something; /* always equals 0x43 */
97 u8 control; /* settings of flow control lines */
98#define CONTROL_MASK 0x0c
99#define CONTROL_DTR_HIGH 0x08
100#define CONTROL_RTS_HIGH 0x04
101 u8 tx_status;
102#define TX_BUFFER_EMPTIED 0x09
103 u8 pin_state;
104#define PIN_MASK 0x3f
105#define PIN_MSR_MASK 0x1b
106#define PIN_RTS 0x20 /* output pin */
107#define PIN_CTS 0x10 /* input pin, active low */
108#define PIN_DSR 0x08 /* input pin, active low */
109#define PIN_DTR 0x04 /* output pin */
110#define PIN_RI 0x02 /* input pin, active low */
111#define PIN_DCD 0x01 /* input pin, active low */
112 u8 rx_bytes_avail; /* number of bytes in rx buffer */;
113};
114
115#define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt)
116#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
117 (((a)->divisor == (priv)->pending_setup.divisor) \
118 && ((a)->control == (priv)->pending_setup.control) \
119 && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
120
121/* function prototypes */
122static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
123static void oti6858_close(struct usb_serial_port *port);
124static void oti6858_set_termios(struct tty_struct *tty,
125 struct usb_serial_port *port, struct ktermios *old);
126static void oti6858_init_termios(struct tty_struct *tty);
127static void oti6858_read_int_callback(struct urb *urb);
128static void oti6858_read_bulk_callback(struct urb *urb);
129static void oti6858_write_bulk_callback(struct urb *urb);
130static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
131 const unsigned char *buf, int count);
132static int oti6858_write_room(struct tty_struct *tty);
133static int oti6858_chars_in_buffer(struct tty_struct *tty);
134static int oti6858_tiocmget(struct tty_struct *tty);
135static int oti6858_tiocmset(struct tty_struct *tty,
136 unsigned int set, unsigned int clear);
137static int oti6858_port_probe(struct usb_serial_port *port);
138static int oti6858_port_remove(struct usb_serial_port *port);
139
140/* device info */
141static struct usb_serial_driver oti6858_device = {
142 .driver = {
143 .owner = THIS_MODULE,
144 .name = "oti6858",
145 },
146 .id_table = id_table,
147 .num_ports = 1,
148 .open = oti6858_open,
149 .close = oti6858_close,
150 .write = oti6858_write,
151 .set_termios = oti6858_set_termios,
152 .init_termios = oti6858_init_termios,
153 .tiocmget = oti6858_tiocmget,
154 .tiocmset = oti6858_tiocmset,
155 .tiocmiwait = usb_serial_generic_tiocmiwait,
156 .read_bulk_callback = oti6858_read_bulk_callback,
157 .read_int_callback = oti6858_read_int_callback,
158 .write_bulk_callback = oti6858_write_bulk_callback,
159 .write_room = oti6858_write_room,
160 .chars_in_buffer = oti6858_chars_in_buffer,
161 .port_probe = oti6858_port_probe,
162 .port_remove = oti6858_port_remove,
163};
164
165static struct usb_serial_driver * const serial_drivers[] = {
166 &oti6858_device, NULL
167};
168
169struct oti6858_private {
170 spinlock_t lock;
171
172 struct oti6858_control_pkt status;
173
174 struct {
175 u8 read_urb_in_use;
176 u8 write_urb_in_use;
177 } flags;
178 struct delayed_work delayed_write_work;
179
180 struct {
181 __le16 divisor;
182 u8 frame_fmt;
183 u8 control;
184 } pending_setup;
185 u8 transient;
186 u8 setup_done;
187 struct delayed_work delayed_setup_work;
188
189 struct usb_serial_port *port; /* USB port with which associated */
190};
191
192static void setup_line(struct work_struct *work)
193{
194 struct oti6858_private *priv = container_of(work,
195 struct oti6858_private, delayed_setup_work.work);
196 struct usb_serial_port *port = priv->port;
197 struct oti6858_control_pkt *new_setup;
198 unsigned long flags;
199 int result;
200
201 new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
202 if (!new_setup) {
203 /* we will try again */
204 schedule_delayed_work(&priv->delayed_setup_work,
205 msecs_to_jiffies(2));
206 return;
207 }
208
209 result = usb_control_msg(port->serial->dev,
210 usb_rcvctrlpipe(port->serial->dev, 0),
211 OTI6858_REQ_T_GET_STATUS,
212 OTI6858_REQ_GET_STATUS,
213 0, 0,
214 new_setup, OTI6858_CTRL_PKT_SIZE,
215 100);
216
217 if (result != OTI6858_CTRL_PKT_SIZE) {
218 dev_err(&port->dev, "%s(): error reading status\n", __func__);
219 kfree(new_setup);
220 /* we will try again */
221 schedule_delayed_work(&priv->delayed_setup_work,
222 msecs_to_jiffies(2));
223 return;
224 }
225
226 spin_lock_irqsave(&priv->lock, flags);
227 if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) {
228 new_setup->divisor = priv->pending_setup.divisor;
229 new_setup->control = priv->pending_setup.control;
230 new_setup->frame_fmt = priv->pending_setup.frame_fmt;
231
232 spin_unlock_irqrestore(&priv->lock, flags);
233 result = usb_control_msg(port->serial->dev,
234 usb_sndctrlpipe(port->serial->dev, 0),
235 OTI6858_REQ_T_SET_LINE,
236 OTI6858_REQ_SET_LINE,
237 0, 0,
238 new_setup, OTI6858_CTRL_PKT_SIZE,
239 100);
240 } else {
241 spin_unlock_irqrestore(&priv->lock, flags);
242 result = 0;
243 }
244 kfree(new_setup);
245
246 spin_lock_irqsave(&priv->lock, flags);
247 if (result != OTI6858_CTRL_PKT_SIZE)
248 priv->transient = 0;
249 priv->setup_done = 1;
250 spin_unlock_irqrestore(&priv->lock, flags);
251
252 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
253 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
254 if (result != 0) {
255 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
256 __func__, result);
257 }
258}
259
260static void send_data(struct work_struct *work)
261{
262 struct oti6858_private *priv = container_of(work,
263 struct oti6858_private, delayed_write_work.work);
264 struct usb_serial_port *port = priv->port;
265 int count = 0, result;
266 unsigned long flags;
267 u8 *allow;
268
269 spin_lock_irqsave(&priv->lock, flags);
270 if (priv->flags.write_urb_in_use) {
271 spin_unlock_irqrestore(&priv->lock, flags);
272 schedule_delayed_work(&priv->delayed_write_work,
273 msecs_to_jiffies(2));
274 return;
275 }
276 priv->flags.write_urb_in_use = 1;
277 spin_unlock_irqrestore(&priv->lock, flags);
278
279 spin_lock_irqsave(&port->lock, flags);
280 count = kfifo_len(&port->write_fifo);
281 spin_unlock_irqrestore(&port->lock, flags);
282
283 if (count > port->bulk_out_size)
284 count = port->bulk_out_size;
285
286 if (count != 0) {
287 allow = kmalloc(1, GFP_KERNEL);
288 if (!allow)
289 return;
290
291 result = usb_control_msg(port->serial->dev,
292 usb_rcvctrlpipe(port->serial->dev, 0),
293 OTI6858_REQ_T_CHECK_TXBUFF,
294 OTI6858_REQ_CHECK_TXBUFF,
295 count, 0, allow, 1, 100);
296 if (result != 1 || *allow != 0)
297 count = 0;
298 kfree(allow);
299 }
300
301 if (count == 0) {
302 priv->flags.write_urb_in_use = 0;
303
304 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
305 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
306 if (result != 0) {
307 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
308 __func__, result);
309 }
310 return;
311 }
312
313 count = kfifo_out_locked(&port->write_fifo,
314 port->write_urb->transfer_buffer,
315 count, &port->lock);
316 port->write_urb->transfer_buffer_length = count;
317 result = usb_submit_urb(port->write_urb, GFP_NOIO);
318 if (result != 0) {
319 dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n",
320 __func__, result);
321 priv->flags.write_urb_in_use = 0;
322 }
323
324 usb_serial_port_softint(port);
325}
326
327static int oti6858_port_probe(struct usb_serial_port *port)
328{
329 struct oti6858_private *priv;
330
331 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
332 if (!priv)
333 return -ENOMEM;
334
335 spin_lock_init(&priv->lock);
336 priv->port = port;
337 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
338 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
339
340 usb_set_serial_port_data(port, priv);
341
342 port->port.drain_delay = 256; /* FIXME: check the FIFO length */
343
344 return 0;
345}
346
347static int oti6858_port_remove(struct usb_serial_port *port)
348{
349 struct oti6858_private *priv;
350
351 priv = usb_get_serial_port_data(port);
352 kfree(priv);
353
354 return 0;
355}
356
357static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
358 const unsigned char *buf, int count)
359{
360 if (!count)
361 return count;
362
363 count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
364
365 return count;
366}
367
368static int oti6858_write_room(struct tty_struct *tty)
369{
370 struct usb_serial_port *port = tty->driver_data;
371 int room = 0;
372 unsigned long flags;
373
374 spin_lock_irqsave(&port->lock, flags);
375 room = kfifo_avail(&port->write_fifo);
376 spin_unlock_irqrestore(&port->lock, flags);
377
378 return room;
379}
380
381static int oti6858_chars_in_buffer(struct tty_struct *tty)
382{
383 struct usb_serial_port *port = tty->driver_data;
384 int chars = 0;
385 unsigned long flags;
386
387 spin_lock_irqsave(&port->lock, flags);
388 chars = kfifo_len(&port->write_fifo);
389 spin_unlock_irqrestore(&port->lock, flags);
390
391 return chars;
392}
393
394static void oti6858_init_termios(struct tty_struct *tty)
395{
396 tty->termios = tty_std_termios;
397 tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
398 tty->termios.c_ispeed = 38400;
399 tty->termios.c_ospeed = 38400;
400}
401
402static void oti6858_set_termios(struct tty_struct *tty,
403 struct usb_serial_port *port, struct ktermios *old_termios)
404{
405 struct oti6858_private *priv = usb_get_serial_port_data(port);
406 unsigned long flags;
407 unsigned int cflag;
408 u8 frame_fmt, control;
409 __le16 divisor;
410 int br;
411
412 cflag = tty->termios.c_cflag;
413
414 spin_lock_irqsave(&priv->lock, flags);
415 divisor = priv->pending_setup.divisor;
416 frame_fmt = priv->pending_setup.frame_fmt;
417 control = priv->pending_setup.control;
418 spin_unlock_irqrestore(&priv->lock, flags);
419
420 frame_fmt &= ~FMT_DATA_BITS_MASK;
421 switch (cflag & CSIZE) {
422 case CS5:
423 frame_fmt |= FMT_DATA_BITS_5;
424 break;
425 case CS6:
426 frame_fmt |= FMT_DATA_BITS_6;
427 break;
428 case CS7:
429 frame_fmt |= FMT_DATA_BITS_7;
430 break;
431 default:
432 case CS8:
433 frame_fmt |= FMT_DATA_BITS_8;
434 break;
435 }
436
437 /* manufacturer claims that this device can work with baud rates
438 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't
439 * guarantee that any other baud rate will work (especially
440 * the higher ones)
441 */
442 br = tty_get_baud_rate(tty);
443 if (br == 0) {
444 divisor = 0;
445 } else {
446 int real_br;
447 int new_divisor;
448 br = min(br, OTI6858_MAX_BAUD_RATE);
449
450 new_divisor = (96000000 + 8 * br) / (16 * br);
451 real_br = 96000000 / (16 * new_divisor);
452 divisor = cpu_to_le16(new_divisor);
453 tty_encode_baud_rate(tty, real_br, real_br);
454 }
455
456 frame_fmt &= ~FMT_STOP_BITS_MASK;
457 if ((cflag & CSTOPB) != 0)
458 frame_fmt |= FMT_STOP_BITS_2;
459 else
460 frame_fmt |= FMT_STOP_BITS_1;
461
462 frame_fmt &= ~FMT_PARITY_MASK;
463 if ((cflag & PARENB) != 0) {
464 if ((cflag & PARODD) != 0)
465 frame_fmt |= FMT_PARITY_ODD;
466 else
467 frame_fmt |= FMT_PARITY_EVEN;
468 } else {
469 frame_fmt |= FMT_PARITY_NONE;
470 }
471
472 control &= ~CONTROL_MASK;
473 if ((cflag & CRTSCTS) != 0)
474 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH);
475
476 /* change control lines if we are switching to or from B0 */
477 /* FIXME:
478 spin_lock_irqsave(&priv->lock, flags);
479 control = priv->line_control;
480 if ((cflag & CBAUD) == B0)
481 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
482 else
483 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
484 if (control != priv->line_control) {
485 control = priv->line_control;
486 spin_unlock_irqrestore(&priv->lock, flags);
487 set_control_lines(serial->dev, control);
488 } else {
489 spin_unlock_irqrestore(&priv->lock, flags);
490 }
491 */
492
493 spin_lock_irqsave(&priv->lock, flags);
494 if (divisor != priv->pending_setup.divisor
495 || control != priv->pending_setup.control
496 || frame_fmt != priv->pending_setup.frame_fmt) {
497 priv->pending_setup.divisor = divisor;
498 priv->pending_setup.control = control;
499 priv->pending_setup.frame_fmt = frame_fmt;
500 }
501 spin_unlock_irqrestore(&priv->lock, flags);
502}
503
504static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
505{
506 struct oti6858_private *priv = usb_get_serial_port_data(port);
507 struct usb_serial *serial = port->serial;
508 struct oti6858_control_pkt *buf;
509 unsigned long flags;
510 int result;
511
512 usb_clear_halt(serial->dev, port->write_urb->pipe);
513 usb_clear_halt(serial->dev, port->read_urb->pipe);
514
515 buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
516 if (!buf)
517 return -ENOMEM;
518
519 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
520 OTI6858_REQ_T_GET_STATUS,
521 OTI6858_REQ_GET_STATUS,
522 0, 0,
523 buf, OTI6858_CTRL_PKT_SIZE,
524 100);
525 if (result != OTI6858_CTRL_PKT_SIZE) {
526 /* assume default (after power-on reset) values */
527 buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */
528 buf->frame_fmt = 0x03; /* 8N1 */
529 buf->something = 0x43;
530 buf->control = 0x4c; /* DTR, RTS */
531 buf->tx_status = 0x00;
532 buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */
533 buf->rx_bytes_avail = 0x00;
534 }
535
536 spin_lock_irqsave(&priv->lock, flags);
537 memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE);
538 priv->pending_setup.divisor = buf->divisor;
539 priv->pending_setup.frame_fmt = buf->frame_fmt;
540 priv->pending_setup.control = buf->control;
541 spin_unlock_irqrestore(&priv->lock, flags);
542 kfree(buf);
543
544 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
545 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
546 if (result != 0) {
547 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
548 __func__, result);
549 oti6858_close(port);
550 return result;
551 }
552
553 /* setup termios */
554 if (tty)
555 oti6858_set_termios(tty, port, NULL);
556
557 return 0;
558}
559
560static void oti6858_close(struct usb_serial_port *port)
561{
562 struct oti6858_private *priv = usb_get_serial_port_data(port);
563 unsigned long flags;
564
565 spin_lock_irqsave(&port->lock, flags);
566 /* clear out any remaining data in the buffer */
567 kfifo_reset_out(&port->write_fifo);
568 spin_unlock_irqrestore(&port->lock, flags);
569
570 dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__);
571
572 /* cancel scheduled setup */
573 cancel_delayed_work_sync(&priv->delayed_setup_work);
574 cancel_delayed_work_sync(&priv->delayed_write_work);
575
576 /* shutdown our urbs */
577 dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__);
578 usb_kill_urb(port->write_urb);
579 usb_kill_urb(port->read_urb);
580 usb_kill_urb(port->interrupt_in_urb);
581}
582
583static int oti6858_tiocmset(struct tty_struct *tty,
584 unsigned int set, unsigned int clear)
585{
586 struct usb_serial_port *port = tty->driver_data;
587 struct oti6858_private *priv = usb_get_serial_port_data(port);
588 unsigned long flags;
589 u8 control;
590
591 dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n",
592 __func__, set, clear);
593
594 /* FIXME: check if this is correct (active high/low) */
595 spin_lock_irqsave(&priv->lock, flags);
596 control = priv->pending_setup.control;
597 if ((set & TIOCM_RTS) != 0)
598 control |= CONTROL_RTS_HIGH;
599 if ((set & TIOCM_DTR) != 0)
600 control |= CONTROL_DTR_HIGH;
601 if ((clear & TIOCM_RTS) != 0)
602 control &= ~CONTROL_RTS_HIGH;
603 if ((clear & TIOCM_DTR) != 0)
604 control &= ~CONTROL_DTR_HIGH;
605
606 if (control != priv->pending_setup.control)
607 priv->pending_setup.control = control;
608
609 spin_unlock_irqrestore(&priv->lock, flags);
610 return 0;
611}
612
613static int oti6858_tiocmget(struct tty_struct *tty)
614{
615 struct usb_serial_port *port = tty->driver_data;
616 struct oti6858_private *priv = usb_get_serial_port_data(port);
617 unsigned long flags;
618 unsigned pin_state;
619 unsigned result = 0;
620
621 spin_lock_irqsave(&priv->lock, flags);
622 pin_state = priv->status.pin_state & PIN_MASK;
623 spin_unlock_irqrestore(&priv->lock, flags);
624
625 /* FIXME: check if this is correct (active high/low) */
626 if ((pin_state & PIN_RTS) != 0)
627 result |= TIOCM_RTS;
628 if ((pin_state & PIN_CTS) != 0)
629 result |= TIOCM_CTS;
630 if ((pin_state & PIN_DSR) != 0)
631 result |= TIOCM_DSR;
632 if ((pin_state & PIN_DTR) != 0)
633 result |= TIOCM_DTR;
634 if ((pin_state & PIN_RI) != 0)
635 result |= TIOCM_RI;
636 if ((pin_state & PIN_DCD) != 0)
637 result |= TIOCM_CD;
638
639 dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result);
640
641 return result;
642}
643
644static void oti6858_read_int_callback(struct urb *urb)
645{
646 struct usb_serial_port *port = urb->context;
647 struct oti6858_private *priv = usb_get_serial_port_data(port);
648 int transient = 0, can_recv = 0, resubmit = 1;
649 int status = urb->status;
650
651 switch (status) {
652 case 0:
653 /* success */
654 break;
655 case -ECONNRESET:
656 case -ENOENT:
657 case -ESHUTDOWN:
658 /* this urb is terminated, clean up */
659 dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n",
660 __func__, status);
661 return;
662 default:
663 dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n",
664 __func__, status);
665 break;
666 }
667
668 if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) {
669 struct oti6858_control_pkt *xs = urb->transfer_buffer;
670 unsigned long flags;
671
672 spin_lock_irqsave(&priv->lock, flags);
673
674 if (!priv->transient) {
675 if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
676 if (xs->rx_bytes_avail == 0) {
677 priv->transient = 4;
678 priv->setup_done = 0;
679 resubmit = 0;
680 dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
681 schedule_delayed_work(&priv->delayed_setup_work, 0);
682 }
683 }
684 } else {
685 if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) {
686 priv->transient = 0;
687 } else if (!priv->setup_done) {
688 resubmit = 0;
689 } else if (--priv->transient == 0) {
690 if (xs->rx_bytes_avail == 0) {
691 priv->transient = 4;
692 priv->setup_done = 0;
693 resubmit = 0;
694 dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
695 schedule_delayed_work(&priv->delayed_setup_work, 0);
696 }
697 }
698 }
699
700 if (!priv->transient) {
701 u8 delta = xs->pin_state ^ priv->status.pin_state;
702
703 if (delta & PIN_MSR_MASK) {
704 if (delta & PIN_CTS)
705 port->icount.cts++;
706 if (delta & PIN_DSR)
707 port->icount.dsr++;
708 if (delta & PIN_RI)
709 port->icount.rng++;
710 if (delta & PIN_DCD)
711 port->icount.dcd++;
712
713 wake_up_interruptible(&port->port.delta_msr_wait);
714 }
715
716 memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
717 }
718
719 if (!priv->transient && xs->rx_bytes_avail != 0) {
720 can_recv = xs->rx_bytes_avail;
721 priv->flags.read_urb_in_use = 1;
722 }
723
724 transient = priv->transient;
725 spin_unlock_irqrestore(&priv->lock, flags);
726 }
727
728 if (can_recv) {
729 int result;
730
731 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
732 if (result != 0) {
733 priv->flags.read_urb_in_use = 0;
734 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
735 " error %d\n", __func__, result);
736 } else {
737 resubmit = 0;
738 }
739 } else if (!transient) {
740 unsigned long flags;
741 int count;
742
743 spin_lock_irqsave(&port->lock, flags);
744 count = kfifo_len(&port->write_fifo);
745 spin_unlock_irqrestore(&port->lock, flags);
746
747 spin_lock_irqsave(&priv->lock, flags);
748 if (priv->flags.write_urb_in_use == 0 && count != 0) {
749 schedule_delayed_work(&priv->delayed_write_work, 0);
750 resubmit = 0;
751 }
752 spin_unlock_irqrestore(&priv->lock, flags);
753 }
754
755 if (resubmit) {
756 int result;
757
758/* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */
759 result = usb_submit_urb(urb, GFP_ATOMIC);
760 if (result != 0) {
761 dev_err(&urb->dev->dev,
762 "%s(): usb_submit_urb() failed with"
763 " error %d\n", __func__, result);
764 }
765 }
766}
767
768static void oti6858_read_bulk_callback(struct urb *urb)
769{
770 struct usb_serial_port *port = urb->context;
771 struct oti6858_private *priv = usb_get_serial_port_data(port);
772 unsigned char *data = urb->transfer_buffer;
773 unsigned long flags;
774 int status = urb->status;
775 int result;
776
777 spin_lock_irqsave(&priv->lock, flags);
778 priv->flags.read_urb_in_use = 0;
779 spin_unlock_irqrestore(&priv->lock, flags);
780
781 if (status != 0) {
782 dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__);
783 return;
784 }
785
786 if (urb->actual_length > 0) {
787 tty_insert_flip_string(&port->port, data, urb->actual_length);
788 tty_flip_buffer_push(&port->port);
789 }
790
791 /* schedule the interrupt urb */
792 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
793 if (result != 0 && result != -EPERM) {
794 dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
795 " error %d\n", __func__, result);
796 }
797}
798
799static void oti6858_write_bulk_callback(struct urb *urb)
800{
801 struct usb_serial_port *port = urb->context;
802 struct oti6858_private *priv = usb_get_serial_port_data(port);
803 int status = urb->status;
804 int result;
805
806 switch (status) {
807 case 0:
808 /* success */
809 break;
810 case -ECONNRESET:
811 case -ENOENT:
812 case -ESHUTDOWN:
813 /* this urb is terminated, clean up */
814 dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status);
815 priv->flags.write_urb_in_use = 0;
816 return;
817 default:
818 /* error in the urb, so we have to resubmit it */
819 dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status);
820 dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__);
821
822 port->write_urb->transfer_buffer_length = 1;
823 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
824 if (result) {
825 dev_err_console(port, "%s(): usb_submit_urb() failed,"
826 " error %d\n", __func__, result);
827 } else {
828 return;
829 }
830 }
831
832 priv->flags.write_urb_in_use = 0;
833
834 /* schedule the interrupt urb if we are still open */
835 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
836 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
837 if (result != 0) {
838 dev_err(&port->dev, "%s(): failed submitting int urb,"
839 " error %d\n", __func__, result);
840 }
841}
842
843module_usb_serial_driver(serial_drivers, id_table);
844
845MODULE_DESCRIPTION(OTI6858_DESCRIPTION);
846MODULE_AUTHOR(OTI6858_AUTHOR);
847MODULE_LICENSE("GPL");